Dell™ Bluetooth Speakers
User’s Guide
Regulatory model: AC411
Setup .………………………………………………………………………………………….
Contents of the box ……………………………………………………….…………
Setting up Your Dell Bluetooth Speakers ……………………………….......
Pairing Your Dell Bluetooth Speakers …………………………………………
Features ………………………………………………………………………………………
View of the Remote control …………………………………………………..…
View of the woofer’s rear ………………………………………………………….
Bluetooth 3.0 ………………………………………………………………………….
Regulatory ……………………………………………………………………..………
Certifications ……………………………………………………………………..…………
3
Pairing Your Dell Bluetooth Speakers
The speaker system needs to be paired before using it.
Procedure
1. Turn on the bluetooth on your computer or your bluetooth device.
2. Press the power button on the remote control.
3. Press and hold the bluetooth button on the remote control for two
seconds to enable device search.
Off
Blinking
Pairing
On
Bluetooth LED：
Disconnected
Connected
Status：
4. Follow the instructions to add the speaker system to your computer
based on the operating system installed on your computer.
• Windows 7:
(i) Click Start→ Control Panel→ Devices and Printers→ Add a device.
6
(ii) Follow the instructions on the screen to complete the pairing.
Dell AC411
• Windows 8:
(i) Move your mouse pointer to the upper-right or lower-right corner of the screen to open the Charms sidebar,
and then click Settings→ Control Panel→ Devices and Printers→ Add a device.
7
(ii) Follow the instructions on the screen to complete the pairing.
Dell AC411
8
Troubleshooting the Dell Bluetooth Speakers
If you have problems with your speaker system
COMMON SYMPTOMS
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
Speakers are not functioning Speakers are powered on but the
properly / No sound from the power-status light is off.
speakers
- If the power-status light is off,
check if the wall socket is working.
Connect the speakers to a different
wall socket and try again.
- Make sure the power adapter is
connected to the speakers.
- The power adapter has failed and
needs to be replaced.
The power-status light is on but
the speakers are not working in the
Aux-in mode.
- Make sure the Aux-in cable is
connected to the Aux-in port and
bluetooth LED is turned off. Reseat
the Aux-in cable and try again.
- Make sure that the bluetooth on
your device is turned on.
- Make sure the Bluetooth LED is
blinking blue on the remote
control.
The power-status light is on but
the speakers are not working in the
bluetooth mode.
-
Pair the speaker with your
computer again.
The speakers are not appearing in
the Devices and Printers list in the
operating system.
- Restart the speakers.
-
Pair the speaker with your
computer again.
Remove
Sound from the speakers is Distorted sound in AUX-in mode
distorted
-
any
obstructions
between the speakers and the user.
- Make sure the Aux-in cable is
connected firmly to the woofer and
your computer.
- Set the volume control on the
remote control to fifty percent.
- Decrease the volume level in the
application program.
- Clean and reseat all the cables.
- Test the speakers on another
audio source for example
portable music player.
a
- Ensure no loose objects are
touching the speaker.
Distorted sound in Bluetooth
mode
-
Remove
any
obstructions
between the speakers and the user.
- Set the volume control on the
remote control to fifty percent.
- Clean and reseat all the cables.
- Test the speakers on another
audio source for example
portable music player.
a
- Reduce the bass using the remote
control
- Ensure no loose objects are
touching the speaker.
10
No sound from one of the Sound is audible only from one of
-
Remove
any
obstructions
speakers
the speakers.
between the speakers and the user.
- Make sure the Aux-in cable is
connected firmly to the audio
source.
- In the Windows volume control
slide the audio balance to the
midpoint.
- Clean and reseat all the cables.
- Test the speakers on another
audio source for example
portable music player.
a
Low sound output
Volume is too low
-
Remove
any
obstructions
between the speakers and the user.
- Increase the volume level on the
remote control, bluetooth device,
operating system, and application
program.
- Test the speakers on another
audio source for example
portable music player.
a
Static noise from the speakers
No sound from headset
Buzzing Noise
-
Remove
any
obstructions
between the speakers.
- Make sure that there are no loose
objects is hanging or touching the
speakers.
- Try decreasing the volume level
on the remote control.
- Make sure the audio source is
playing music.
No audible sound from the
headset in AUX-in mode
- Make sure the volume level on the
audio source and the remote
control is not set to minimum.
- Make sure the audio source is
playing music.
No audible sound from the
headset in Bluetooth mode
- Make sure the bluetooth devices
are paired correctly.
- Make sure the volume level on the
audio source and the remote
control is not set to minimum.
Headset distortion
Distorted sound in AUX-in mode
-
Remove
any
obstructions
between the speakers and the user.
- Make sure the Aux-in cable is
connected firmly to the woofer and
your computer.
- Make sure the RC-in cable is
connected firmly to the woofer and
the remote control.
- Make sure the headset is
connected firmly to the remote
control.
- Set the volume control on the
remote control to fifty percent.
- Decrease the volume level in the
application program.
- Clean and reseat all the cables.
- Test the headset on another audio
source for example
music player.
a
portable
- Ensure no loose objects are
touching the speaker.
11
Specifications
General
Model number
AC411
Connection type
Bluetooth 3.0
Supported operating systems
Microsoft Windows 7 SP1 or later,
Windows 8
Electrical
Operating voltage
Operating current
Output power
18V
2.5A
7W+7W +15W continuous RMS power @
≤ 10% THD
Physical Characteristics
Woofer: Height Length Width
Height = 141 mm
Length = 150 mm
Width = 150 mm
200 mm
70*70*17.5 mm
179 mm
Line in cable length
Remote control L*W*H
Adapter cable
Cable on the remote control
Weight
200 mm
2124 g
Environmental
Operating temperature
Storage temperature
Operating humidity
0 °C to 40 °C
-40 °C to 65 °C
90% maximum relative humidity,
non condensing
Storage humidity
90% maximum relative humidity,
non condensing
Bluetooth 3.0
Radio transmission
The baseband transmit data is GFSK
Modulated in the 2.4 GHz ISM band
Up to 10m radio range.
Range
No performance degradation up to max
radio range (10 m)
12
Statutory Information
Warranty
Limited Warranty and Return Policies
Dell-branded products carry a 1-year limited hardware warranty.
If purchased together with a Dell system, it will follow the system warranty.
For U.S. customers:
This purchase and your use of this product are subject to Dell’s end user agreement,
arbitration clause.
For European, Middle Eastern and African customers:
Dell-branded products that are sold and used are subject to applicable national
consumer legal rights, the terms of any retailer sale agreement that you have entered
into (which will apply between you and the retailer) and Dell’s end user contract terms.
Dell may also provide an additional hardware warranty – full details of the Dell end user
your country from the list at the bottom of the “home” page and then clicking the
“terms and conditions” link for the end user terms or the “support” link for the warranty
terms.
For non-U.S. customers:
Dell-branded products that are sold and used are subject to applicable national
consumer legal rights, the terms of any retailer sale agreement that you have entered
into (which will apply between you and the retailer) and Dell’s warranty terms. Dell may
also provide an additional hardware warranty – full details of Dell’s warranty terms can
of the “home” page and then clicking the “terms and conditions” link or the “support”
link for the warranty terms.
13
Regulatory
Dell Bluetooth Speakers Model: AC411
Regulatory Information
Warning: Changes or modifications on this unit are not expressly approved by the party
responsible for compliance which could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class
B FCC limits.
Agency Approval
Argentina CNC, Australia & New Zealand C-Tick, Brazil ANATEL, Brunei Darussalam AITI,
Canada CUL or CSA, Chile SUBTEL, China CCC SRRC(MIIT), Egypt NTRA, Germany
TUV-GS, India WPC, Indonesia DGPT, Israel MOC, Japan MIC VCCI, Kazakhstan TELSET,
Kenya CCK, Malaysia SIRIM, Mexico COFETEC NOM, Morocco ANRT, Nigeria NCC Son
cap, Philippines NTC, Qatar ict QATAR, Russian Federation FAC CU, Saudi Arabia
CTIC+SASO, Serbia TELEKOM Kvalitet, Singapore IDA, South Africa ICASA SABS(COC)
NRCS(LOA), Korea, Taiwan NCC+BSMI, Thailand NBTS, Ukraine UKRSEPRO COC+DOC,
United Arab Emirates TRA, United States FCC CUL us, Vietnam MIC, Europe CE CB.
14
Certifications
Microsoft WHQL Logo
The Dell Bluetooth Speakers has passed WHQL logo testing by Microsoft Windows
Hardware Quality Labs.
WHQL Logo is a certification scheme operated by Microsoft Windows Hardware Quality
Labs. In this case it ensures that hardware is compatible with Microsoft Operating
Systems. The speaker is qualified through the use of WHQL test kits and has been
included in the Microsoft Hardware Compatibility list.
15
|