PUV-1510RX
HDBaseT™ 5Play™ Receiver
(inc. PoH & single LAN, up to 100m)
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
3
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
•
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
•
•
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
•
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE
SUMMARY OF CHANGE
v1.00
16/05/2019
First release
4
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3. IR Cable Pin Assignment ......................10
6.4. D-Sub 9 Pin Definitions ........................10
7. Connection Diagram .......................... 11
8. Specifications...................................... 12
8.1 CAT5e/6/7 Cable Specification ...........13
8.2 Timing Support Chart ............................14
9. Acronyms............................................. 15
5
1. INTRODUCTION
The HDMI over single CAT5e/6/7 Receiver can receive uncompressed
audio/video and IP data over a single run of CAT5e/6/7 cable at a distance
up to 100 meter. It has the added benefit of control through the built-in
RS-232 and IR ports and a bi-directional LAN serving connection. The
Receiver (PD) can be powered by the PoE 48V function of the Transmitter
(PSE), allowing for greater flexibility in installations.
2. APPLICATIONS
48V PoE from Transmitter (PSE) to Receiver (PD)
Household entertainment sharing and control
Lecture room display and control
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
ꢀ
1 x CAT5e/6/7 over HDMI Receiver
1 x IR Extender
ꢀ
4. SYSTEM REQUIREMENTS
Input source equipment such as PS3/Blu-ray player and output HD TV/
display.
6
5. FEATURES
HDMI with 3D, 4K2K support, HDMI & DVI Compliant
Supports CEC bypass
ꢀ
ꢀ
ꢀ
Simultaneous reception of uncompressed data over a single
100m/328ft CAT5e/6/7 cable
5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-2232)
Supports resolution up to 4K2K@50/60 & YUV_420 and 21:9
Supports standard 48V from Transmitter (PSE) to Receiver (PD)
Installation Friendly
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Supports HDMI Output cable distance up to 5m at 4K2K@50/60 &
YUV_420
Note:
Displaying HDMI 3D and 4K2K contents, equivalent source signal and HDMI
cable are required in order to secure the quality.
7
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
IR2
BLASTER
HDMI OUT
IR1
IN
EXTENDER
CAT5e/6/7
1
2
3
4
1
2
IR2 BLASTER: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
IR1 EXTENDER: Connect to the supplied IR Extender cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
3
4
CAT5e/6/7: Connect to the Transmitter unit with a single CAT5e/6/7
cable for transmission of all data signals.
HDMI OUT: Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
8
6.2 Rear Panel
RS-232 OUT
POWER
STD UPDATE
LAN
LINK
5
6
7
8
9
1
2
STD/UPDATE Switch: This switch is reserved for factory use only.
RS-232 OUT: Connect to the device that is to be controlled (via D-Sub
9-pin female cable) by RS-232 commands.
3
4
5
LAN: Connect to a PC or Laptop to utilise the Internet or network
function.
POWER LED: This LED will illuminate when the device is connected to
a power supply.
LINK LED: This LED will illuminate when both the input source and
output display signals are connected through CAT cable. When it
blinks regularly it states the display is NOT sending signals to Receiver
but the Transmitter and Receiver are linked and if it blinks irregularly it
indicates an error has occurred.
9
6.3. IR Cable Pin Assignment
IR Extender
1
2
3
IR Signal
Power
Ground
6.4. D-Sub 9 Pin Definitions
Pin
1
Define TX / RX
N/C
TxD / RxD
RxD / TxD
N/C
2
3
4
5
GND
6
N/C
7
N/C
8
N/C
9
N/C
10
7. CONNECTION DIAGRAM
RS-232 Equipped
PC or Notebook
Internet Modem
or Router
CAT5e/6
1.5m
60°
DVD or Blu-ray Player
RS-232
IR Blaster
Power
Supply
POWER
LINK
STD UPDATE
LAN
7m
TX
HDMI
3m
3m
60°
IR1
BLASTER
HDMI IN
IR2
DC 48V
EXTEDER CATUT
IR Extender
IR Extender
IR2
60°
3m
BLASTER
IR1
EXTENDER
CAT5e/6/7 IN
3m
RX
TV or Monitor
IR Blaster
7m
RS-232 OUT
POWER
LINK
STD UPDATE
60°
1.5m
HDMI
RS-232
Notebook
CAT5e/6
RS-232 Equipped
HDMI Switcher
11
8. SPECIFICATIONS
Video Bandwidth
Inputs
340MHz / 10.2Gbps
1 x CAT5e/6/7, 1 x IR Extender
Outputs
1 x HDMI, 1 x RS-232, 1 X IR Blaster, 1 x LAN
HD: 480i~4K2K@24/25/30/50/60 & YUV_420
HDMI Resolution
PC: VGA ~ WUXGA (RB)
HDMI Cable Distance
Out: 10m/1080p@8-bit, 5m/1080p@12-bit and
5m@4K2K
CAT5e/6/7 I/O Cable
Distance
Up to 100m
IR Frequency
30~50kHz
ESD Protection
Human Body Model:
8kV (air-gap discharge)
4kV (contact discharge)
Power Supply
Dimensions
48 V/0.83 A DC (US/EU Standards, CE/FCC/UL
certified)
108mm (W) x 108mm (D) x 25mm (H)
108mm (W) x 116mm (D) x 29mm (H)
366g
Weight
Chassis Material
Silkscreen Colour
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Metal
Black
13.5w (Include Transmitter)
0 °C~40 °C/32 °F ~104 °F
−20 °C~60 °C/−4 °F~140 °F
20~90% RH (non-condensing)
12
8.1 CAT5e/6/7 Cable Specification
Cable
Range
Pixel clock Video Data
rate Rate
Supported
Video
Type
CAT5e/6/7
100 m
<=225 MHz <=5.3 Gbps
Up to 1080p, 60
Hz, 36 bits, 3D
(data rates lower
than 5.3 Gbps or
below 225 MHz
TMDS clock).
(HD Video)
70 m/CAT5e/6 >225 MHz
100 m/CAT7
> 5.3 Gbps
(Ultra HD
Video)
4K2K, 30Hz
video formats
13
8.2 Timing Support Chart
INPUT
OUTPUT
640x480@60/72/75/85
800x600@56/60/72/75/85
1024x768@60/70/75/85
1280x720@60
1280x1024@60
1600x1200@60
1920x1200@60RB
3840x2160p@24/25/30
4096x2160p@24
4096x2160p@50/60(YUV_420)
480I/576I
480P/576P
720P@50/60
1080I@50/60
1080P@50/60
1080P@24/25/30
14
9. ACRONYMS
ACRONYM
CAT5e
CAT6
CAT7
CEC
COMPLETE TERM
Category 5 Cable
Category 6 Cable
Category 7 Cable
Consumer Electronics Control
Digital Visual Interface
High-bandwidth Digital Content Protection
High Definition Multimedia Interface
Infrared
DVI
HDCP
HDMI
IR
PD
Powered Device
PSE
Power Sourcing Equipment
15
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279
Email: [email protected]
v1.00
|