LG F4V909WTSA User Manual

global_main.book.book Page 1 Monday, August 23, 2021 3:24 PM

OWNER'S MANUAL

WASHING MACHINE

Before beginning installation, read these instructions

carefully. This will simplify installation and ensure that the

product is installed correctly and safely. Leave these

instructions near the product after installation for future

reference.

ENGLISH

F4V909WTSA

www.lg.com

MFL71781350

Rev.00_082321

global_main.book.book Page 3 Monday, August 23, 2021 3:24 PM

APPENDIX

Technical Data ..................................................................................................66

global_main.book.book Page 4 Monday, August 23, 2021 3:24 PM

CARING FOR THE ENVIRONMENT

Environmental and Economical Tips

Energy and water consumption

• Water consumption and energy usage can be affected by the weight

of the load. To make the best use of your appliance, load the

maximum amount of dry clothes for the particular programme.

• The most efficient programmes in terms of energy consumption are

generally those that perform at lower temperatures and longer

duration.

• Noise and remaining moisture content are influenced by the spinning

speed: the higher the spinning speed in the spinning phase, the

higher the noise and the lower the remaining moisture content.

• Evenly loading laundry up to the capacity indicated by the

manufacturer for the respective programmes will contribute to

energy and water savings.

• For washing smaller amounts of clothes, the automatic load

recognition system will help reduce the amount of water and energy

usage.

• Use the Speed programme for small, lightly soiled loads.

• Cold water laundry detergents can be as effective at lower

temperatures (about 20 ℃). Using 20 ℃ settings will use less energy

than 30 ℃ or higher temperatures.

Detergent

• Detergent should be chosen according to type, colour, soiling of the

fabric and the washing temperature. And it should be used according

to the instruction of the detergent manufacturer. Use only

detergents that are suitable for Drum (front load) type washers.

• Use less detergent on smaller loads.

- Partial load: 1/2 of the normal amount.

- Minimum load: 1/3 of full load.

global_main.book.book Page 5 Monday, August 23, 2021 3:24 PM

CARING FOR THE ENVIRONMENT

Selecting Extra Options and Functions

• Select the water temperature suitable for the type of load you are

washing. Follow the garment fabric care labels for best results.

• The Pre Wash option is recommended for washing a heavily soiled

load.

Disposal of the Packaging Material

• The packaging materials are designed to protect the appliance from

unexpected damage during transportation.

• After installing the appliance, dispose of the packaging waste

according to recycling symbols of material types. Put the packaging

waste in relevant containers to recycle it.

Disposal of Your Old Appliance

• This crossed-out wheeled bin symbol indicates that waste

electrical and electronic products (WEEE) should be

disposed of separately from the municipal waste stream.

• Old electrical products can contain hazardous substances

so correct disposal of your old appliance will help prevent

potential negative consequences for the environment and

human health. Your old appliance may contain reusable

parts that could be used to repair other products, and

other valuable materials that can be recycled to conserve

limited resources.

• You can take your appliance either to the shop where you

purchased the product, or contact your local government

waste office for details of your nearest authorised WEEE

collection point. For the most up to date information for

your country, please see www.lg.com/global/recycling.

global_main.book.book Page 6 Monday, August 23, 2021 3:24 PM

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

The following safety guidelines are intended to prevent unforeseen

risks or damage from unsafe or incorrect operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as

described below.

Safety Messages

This symbol is displayed to indicate matters and operations

that can cause risk. Read the part with this symbol carefully

and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can

cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can

cause the minor injury or damage to the product.

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or

scalding to persons when using this product, follow basic precautions,

including the following:

Technical Safety

• This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall not be made by

children without supervision.

global_main.book.book Page 7 Monday, August 23, 2021 3:24 PM

SAFETY INSTRUCTIONS

• Children of less than 3 years should be kept away unless continuously

supervised.

• If the power cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in order

to avoid a hazard.

• Ventilation openings must not be obstructed by a carpet.

• This appliance is intended to be used in household only.

• Use a new hose or hose-set supplied with the appliance. Reusing old

hoses can cause a water leak and subsequent property damage.

• The water pressure must be between 50 kPa and 800 kPa.

Maximum Capacity

The maximum capacity in some cycles for dry clothes to be washed is

kg.

The recommended maximum capacity for each washing programme

may differ. To get good wash results, please refer to Programme

Table in OPERATION chapter for further details.

Installation

• Never attempt to operate the appliance if it is damaged,

malfunctioning, partially disassembled, or has missing or broken

parts, including a damaged cord or plug.

• This appliance should only be transported by two or more people

holding the appliance securely.

• Do not install the appliance in a damp and dusty place. Do not install

or store the appliance in any outdoor area, or any area that is subject

to weathering conditions such as direct sunlight, wind, rain, or

temperatures below freezing.

• Make sure the power plug is completely pushed into the power

outlet.

• Do not plug the appliance into multiple outlet sockets, power boards,

or an extension power cable.

• Do not modify the power plug provided with the appliance. If it does

not fit the power outlet, have a proper outlet installed by a qualified

electrician.

global_main.book.book Page 8 Monday, August 23, 2021 3:24 PM

SAFETY INSTRUCTIONS

• This appliance is equipped with a power cord having an equipment-

earthing / grounding conductor (earthing pin) and a grounding

power plug. The power plug must be plugged into an appropriate

outlet socket that is installed and earthed / grounded in accordance

with all local codes and ordinances.

• Improper connection of the equipment-grounding conductor can

result in risk of electric shock. Check with a qualified electrician or

service personnel if you are in doubt as to whether the appliance is

properly grounded.

• This appliance must not be installed behind a lockable door, a sliding

door or a door with a hinge on the opposite side to that of the

appliance, in such a way that a full opening of the appliance door is

restricted.

Operation

• Do not apply any sharp objects to the control panel in order to

operate the appliance.

• Do not attempt to separate any panels or disassemble the appliance.

• Do not repair or replace any part of the appliance. All repairs and

servicing must be performed by qualified service personnel unless

specifically recommended in this Owner's Manual. Use only

authorized factory parts.

• Do not push down the door excessively, when the appliance door is

open.

• Do not put animals, such as pets into the appliance.

• Do not wash rugs, mats, shoes or pet blankets, stuffed toys, or any

other items other than clothes or sheets, in this machine.

• Keep the area underneath and around the appliance free of

combustible materials such as lint, paper, rags, chemicals, etc.

• Do not leave the appliance door open. Children may hang on the door

or crawl inside the appliance, causing damage or injury.

• Do not put in, wash or dry articles that have been cleaned in, washed

in, soaked in, or spotted with combustible or explosive substances

(such as waxes, wax removers, oil, paint, gasoline, degreasers,

drycleaning solvents, kerosene, petrol, spot removers, turpentine,

vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can

cause fire or explosion.

global_main.book.book Page 9 Monday, August 23, 2021 3:24 PM

SAFETY INSTRUCTIONS

• Do not use or store flammable or combustible substances (ether,

benzene, alcohol, chemical, LPG, combustible spray, gasoline,

thinner, petroleum, insecticide, air freshener, cosmetics, etc.) near

the appliance.

• Never reach into the appliance while it is operating. Wait until the

drum has completely stopped.

• Do not touch the door during a high temperature programme.

• In case of a water leak from the appliance or flood, disconnect the

power plug and contact the LG Electronics customer information

centre.

• Turn off water taps to relieve pressure on hoses and valves and to

minimize leakage if a break or rupture should occur. Check the

condition of the fill hoses; they should be replaced after 5 years.

• If there is a gas leakage (isobutane, propane, natural gas, etc.) within

the home, do not touch the appliance or power plug and ventilate the

area immediately.

• If the drain hose or inlet hose is frozen during winter, use it only after

thawing.

• Keep all washing detergents, softener and bleach away from

children.

• Do not touch the power plug or the appliance controls with wet

hands.

• Do not bend the power cable excessively or place a heavy object on it.

• Avoid touching any water that is drained from the appliance during

the wash.

• Make sure that drainage is working properly. If water is not drained

properly, your floor may get flooded.

• When the air temperature is high and the water temperature is low,

condensation may occur and thus wet the floor.

• Wipe off dirt or dust on the contacts of the power plug.

Maintenance

• Disconnect the appliance from the power supply before cleaning the

appliance. Setting the controls to the OFF or stand by position does

not disconnect this appliance from the power supply.

global_main.book.book Page 10 Monday, August 23, 2021 3:24 PM

SAFETY INSTRUCTIONS

• Securely plug the power plug in the outlet socket after completely

removing any moisture and dust.

• Do not spray water inside or outside the appliance to clean it.

• Never unplug the appliance by pulling on the power cable. Always

grip the power plug firmly and pull straight out from the outlet

socket.

• Only qualified service personnel from LG Electronics service centre

should disassemble, repair, or modify the appliance.

Disposal

• Before discarding an old appliance, unplug it. Cut off the cable

directly behind the appliance to prevent misuse.

• Dispose of all packaging materials (such as plastic bags and

styrofoam) away from children. The packaging materials can cause

suffocation.

• Remove the door before disposing of or discarding this appliance to

avoid the danger of children or small animals getting trapped inside.

global_main.book.book Page 11 Monday, August 23, 2021 3:24 PM

OPERATION

Operation Overview

Using the Appliance

CAUTION

Before the first wash, select the Cotton

wash programme and add a half amount

of the detergent. Start the appliance

without clothes. This will remove

possible residues and water from the

drum that may have been left during

manufacturing.

• Remove items from the flexible door

seal gasket to prevent clothing and

door seal damage.

Sort clothes by fabric type, soil level,

colour and load size as needed.

Open the door and load items into

the appliance.

CAUTION

Add cleaning products or detergent

and softener.

• Add the proper amount of

detergent to the detergent

dispenser. If desired, add fabric

softener to the appropriate areas of

the dispenser.

• Before closing the door, ensure that all

clothes and items are inside the tub

and not overhanging on the rubber

door seal where they will become

caught when the door is closed. Failing

to do so will cause damage to the door

seal and the clothes.

Press the Power button to turn on

the appliance.

Close the door.

global_main.book.book Page 12 Monday, August 23, 2021 3:24 PM

OPERATION

Choose the desired cycle.

• Press the cycle button repeatedly or

turn the cycle selector knob until

the desired cycle is selected.

• Now select a wash temperature

and spin speed. Pay attention to the

fabric care label of your clothes.

Begin cycle.

• Press the Start/Pause button to

begin the cycle. The appliance will

agitate briefly without water to

measure the weight of the load. If

the Start/Pause button is not

pressed within a certain time, the

appliance will shut off and all

settings will be lost.

NOTE

• In the following case, the door will not

open even if you pause the washing

programme or turn the washing

machine off.

- When the washing machine starts a

washing programme and has water

inside the drum, the door will not

open in order to prevent a flood until

the washing machine drains the

water completely.

End of cycle.

• When the cycle is finished, a melody

will sound. Immediately remove

your clothing from the appliance to

reduce wrinkling.

global_main.book.book Page 13 Monday, August 23, 2021 3:24 PM

OPERATION

Control Panel

The actual control panel may differ from model to model.

Control Panel Features

Remote Start

Power On/Off Button

With the LG ThinQ app, you can use a

smartphone to control your appliance

remotely.

• Press this button to turn the washing

machine on.

Programme Knob

• In order to use this function, refer to

SMART FUNCTIONS

• Programmes are available according

to the clothes type.

• The lamp will light up to indicate the

selected programme.

Wi-Fi

Press and hold the Delay End button for

3 seconds to initiate the connection of

the appliance to the LG ThinQ

application.

Start/Pause Button

• This button is used to start the wash

cycle or pause the wash cycle.

• If a temporary stop of the wash cycle is

needed, press this button.

Buttons

Customizing Washing Programme

Use these buttons to adjust the water

temperature or spin speed settings for

the selected programme.

Extra Options and Functions

• To use the extra functions, press and

hold the corresponding button for 3

seconds. The corresponding symbol

lights up in the display.

• This allows you to select an additional

programmes and will light when

selected.

• The current settings are shown in the

display.

• Press the button for that option to

select other settings.

global_main.book.book Page 14 Monday, August 23, 2021 3:24 PM

OPERATION

ezDispense Buttons

• Press the Dispenser 1 or Dispenser 2

to select ezDispense function.

• LED will light up to indicate the

selected detergent type and amount.

• When the detergent or softener is

insufficient;

- In case of pressing the Power button

: The LED will blink and the chime will

sound.

- In case of running the appliance :

The LED will blink .

ezDispense Nozzle Clean

• Press and hold the Spin button for 3

seconds to use the ezDispense Nozzle

Clean function. Use this function to

change the type of detergent or

softener. This function cleans residual

detergent or softener in the hose

connected to the ezDispense(when

changing the type of detergent or

softener).

Display

• The display shows the settings,

estimated remaining time, options,

and status messages. When the

appliance is turned on, the default

settings in the display will illuminate.

• While the load weight is sensed

automatically, the display on the

control panel blinks.

global_main.book.book Page 15 Monday, August 23, 2021 3:24 PM

OPERATION

Time and Status Display

• The time shown is only an estimate.

Programme Status Indicators

This time is based on normal operating

conditions. Several external factors

(load weight, room temperature,

incoming water temperature, etc.) can

affect the actual time.

• When a washing programme is

running, LED for the active stage will

blink, and the LEDs for the remaining

stages will remain steady. Once a

stage is complete, the LED will turn off.

If a cycle is paused, the active stage

LED will stop blinking.

Beep off Indicator

lights up when the beep is off.

AI DD

Rinse+ Indicator

•

AI DD

provides the appropriate

drum rotation actions after load

sensing is completed.

lights up when the Rinse+ option is

activated.

•

is activated when the Cotton,

Intensive Indicator

lights up when the Intensive option is

Mixed Fabric, and Easy Care

programmes are selected and

operated.

activated.

- If too much detergent is used, too

many suds can occur and this will

cause poor AI DD performance.

Wi-Fi Indicator

lights up when the appliance is

connected to Wi-Fi network at home.

Estimated Time Remaining

• When a washing programme is

selected, the default time for that

programme is displayed. This time will

change as options are selected.

Door Lock Indicator

lights up when the programme starts

and the door is locked.

• If the display shows --- , then the time

will be displayed after the load sensing

has detected the load size. This is

normal.

global_main.book.book Page 16 Monday, August 23, 2021 3:24 PM

OPERATION

Preparing the Wash Load

Sort the wash load for best washing results, and then prepare the clothes according

to the symbols on their care labels.

Sorting the Clothes

Symbol

Wash / Fabric type

• For best washing results, sort your

clothes according to the care label

stating fabric type and washing

temperature. Adjust the spin speed or

spin intensity in accordance with the

fabric type.

• Special Delicate Wash

• Delicates

• Hand Wash Only

• Wool, Silk

• Soil level (Heavy, Normal, Light):

Separate clothes according to soil

level. If possible, do not wash heavily

soiled items with lightly soiled ones.

• Colour (White, Lights, Darks): Wash

dark or dyed clothes separately from

whites or light colours. Mixing dyed

clothes with light clothes can result in

dye transfer or discolouration of

lighter clothes.

• Do not wash

NOTE

• The dashes under the symbol give you

information about the type of fabric

and the maximum allowance of

mechanical stress.

• Lint (Lint producers, Collectors): Wash

separately lint producing fabrics from

lint collecting fabrics. Lint producers

can result in pilling and linting on the

lint collectors.

Checking the Clothes before

• To help distribute the load evenly

during spinning, combine large and

small items in a load.

• Do not wash single small items. Add 1-

2 similar items to the load to prevent

an out-of-balance load.

• Check all pockets to make sure that

they are empty. Items such as nails,

hair clips, matches, pens, coins and

keys can damage both your appliance

and clothes.

Checking the Clothes Care Label

The symbols tell you about the fabric

content of your garment and how it

should be washed.

Symbols on the Care Labels

Symbol

Wash / Fabric type

• Normal Wash

• Cotton, Mixed Fabrics

• Easy Care

• Synthetic, Mixed Fabrics

global_main.book.book Page 17 Monday, August 23, 2021 3:24 PM

OPERATION

• Wash delicates (stockings, underwired

bras) in a wash net.

• Close zippers, hooks and strings to

make sure that these items do not

snag on other clothes.

• Pre-treat dirt and stains by brushing a

small amount of detergent dissolved

water onto stains to help lift dirt.

global_main.book.book Page 18 Monday, August 23, 2021 3:24 PM

OPERATION

Adding Detergents and Softeners

- Liquid detergent is often designed

Detergent Dosage

• Detergent should be used according to

the instruction of the detergent

for special applications, e.g. for

coloured fabric, wool, delicate or

dark clothes.

manufacturer and selected according

to type, colour, soiling of the fabric and

the washing temperature. Use only

detergents that are suitable for Drum

(front load) type washers.

- Powdered detergent is suitable for

all types of fabric.

- For better washing results of white

and pale garments, use powdered

detergent with bleach.

- Detergent is flushed from the

dispenser at the beginning of the

wash cycle.

• If too many suds occur, reduce the

detergent amount.

• If too much detergent is used, too

many suds can occur and this will

result in poor washing results or cause

heavy load to the motor.

NOTE

• Do not let the detergent harden. Doing

so may lead to blockages, poor rinse

performance or odour.

• If you wish to use liquid detergent,

follow the guidelines provided by the

detergent manufacturer.

• Full load: According to manufacturer’s

recommendation.

• Part load: 1/2 of the normal amount.

• Minimum load: 1/3 of full load.

• You can pour liquid detergent directly

into the main detergent drawer if you

are starting the wash cycle

immediately.

• If you select the Pre Wash option after

adding the detergent directly into the

drum, the detergent may be washed

away, reducing the washing

Using the ezDispense Function

performance. For best results, use the

Pre Wash option with the ezDispense

function. The manual dispenser

cannot be used for dispensing pre-

wash detergent.

When the ezDispense function is turned

on, the liquid detergent and softener are

dispensed in the set amounts, at the

appropriate time during the cycle.

• Detergent usage may need to be

adjusted for water temperature, water

hardness, size and soil level of the

load. For best results, avoid

• A full detergent compartment will last

for about 20 standard cycles, with the

drum loaded halfway up with clothes.

• The default settings are configured to

dispense 42 ml of detergent and 30 ml

of softener for 4-6 kg of normally

soiled laundry. This can be changed

using the Dispenser 1 or Dispenser 2

button. Please refer to Extra Options

and Functions in OPERATION chapter

for further details.

overdosing the detergent. Failing to do

so will cause oversudsing.

• Refer to the label of the clothes, before

adding the detergent and choosing

the water temperature.

• Use only suitable detergents for the

respective type of clothing:

global_main.book.book Page 19 Monday, August 23, 2021 3:24 PM

OPERATION

Slowly slide the detergent dispenser

drawer out as far as it will go.

• Do not try to fill the compartments

too quickly. Add detergent and

softener slowly to avoid overflows.

Liquid detergent compartment

Liquid fabric softener or Liquid

detergent compartment

After filling the compartments, insert

the lids and turn them clockwise until

they are tightly closed.

• Securely close the lids to the

ezDispense compartments to

minimize airflow which can harden

these additives and prevent them

from dispensing properly. Be

careful not to lose the lids.

Turn the lids on the ezDispense

compartments counterclockwise to

open them.

Close the dispenser drawer slowly

before starting the cycle.

• Slamming the drawer closed may

result in the detergent overflowing

into another compartment or

dispensing into the drum earlier

than programmed.

• Be careful not to get a hand caught

in the drawer while closing.

• It is normal for a small amount of

water to remain in the manual

dispenser compartments at the end

of the cycle.

Pour the detergent and softener into

their respective compartments, up to

the MAX line.

• The ezDispense drawer has two

compartments. Put the liquid

detergent into the right hand side

compartment and the liquid fabric

softener or liquid detergent into

the left hand side compartment. If

detergent is added to the

compartment, the fabric softener

cannot be used.

• Do not put liquid or powdered

bleach, or powdered, gel or sheet

type detergents into the

CAUTION

• Close lid and cover of the

compartment securely before use. If

not, the detergent and softner will

harden or overflow.

ezDispense compartments.

• Remove any residual detergent on

the outside of the ezDispense

drawer before inserting it.

global_main.book.book Page 20 Monday, August 23, 2021 3:24 PM

OPERATION

Open the detergent dispenser

drawer.

CAUTION

• Slide the detergent dispenser drawer

out or in slowly and use both hands for

safety. Failure to do so can damage the

washer or cause the detergent or

softener to leak out of the ventilation

holes.

• Detergent or fabric softener left in the

ezDispense compartments for an

extended period may harden and fail

to dispense properly.

• Do not remove the dispenser drawer

while the product is in operation.

Load the laundry products into the

appropriate manual dispenser

compartments.

• Use the main wash detergent

compartment at the manual

dispenser for powdered or liquid

detergent.

• Remove detergent/softener in the

ezDispense compartments before

moving or relocating the the washing

machine.

• Do not place detergent sheets,

tablets or packs in the manual

dispenser.

• Keep the ezDispense compartment

level to prevent contents from leaking.

• If using single-use detergent packs,

place the pack in the drum before

loading the laundry. Do not place

liquid or powdered detergent packs

in the any of the dispensers.

Using the Manual Dispense Function

Add detergent to the manual dispenser.

Press the Dispenser 1 or Dispenser 2

button repeatedly to turn off the

ezDispense function.

Manual main wash detergent

compartment

Dispenser 1 button

Dispenser 2 button

Close the detergent dispenser

drawer slowly before starting the

cycle.

global_main.book.book Page 21 Monday, August 23, 2021 3:24 PM

OPERATION

• Slamming the detergent dispenser

drawer may result in the detergent

overflowing into another

Open the door and put detergent

tablets into the drum before loading

the clothes.

compartment or pouring into the

tub earlier than programmed.

Load the clothes into the drum and

close the door.

CAUTION

• Do not place or store laundry products,

such as detergent, bleach, or liquid

fabric softener, on top of your washer.

These products can damage the

washer’s finish and controls.

NOTE

• Do not put tablets into the dispenser.

Adding Water Softener

NOTE

A water softener, such as anti-limescale

can be used to cut down on the use of

detergent in areas with high water

hardness level.

• First add detergent, and then the

water softener. Dispense according to

the amount specified on the

packaging.

• The manual dispenser cannot be used

for dispensing pre-wash detergent.

• When adding detergent tablets and

water softener, be sure to turn off the

ezDispense function.

Manual Main Wash Detergent

Compartment

This compartment holds laundry

detergent for the main wash cycle. It is

recommended that powdered detergent

be used in this compartment.

• Liquid or powdered color-safe bleach

may be added to the manual main

wash compartment with detergent of

the same type. Do not mix liquids and

powders.

• If you use a detergent that does not

dissolve easily or a detergent with high

viscosity, it will leave a residue and clog

the dispenser.

• Be sure to turn off the ezDispense

function.

Adding Detergent Tablets

Detergent tablets can also be used when

washing.

global_main.book.book Page 22 Monday, August 23, 2021 3:24 PM

OPERATION

Programme Table

Washing Programme

Cotton

40 ℃ (Cold to 95 ℃)

Max. Load: Rating

Description Washes normally soiled clothes by combining various drum motions.

Eco 40-60 40 ℃ (40 ℃ to 60 ℃) Max. Load: Rating

Description Washes normally soiled cotton clothes declared to be washable at 40

℃ or 60 ℃.

TurboWash 39

40 ℃ (Cold to 60 ℃)

Max. Load: 5 kg

Description With 4 water jets operating during the wash and rinse, this washing

machine can wash a half load of lightly soiled clothes for

approximately 39 minutes.

Mixed Fabric

Description Washes mixed fabrics simultaneously.

• Use for various kind of fabrics except special garments (silk/

40 ℃ (Cold to 60 ℃)

Max. Load: 4 kg

delicate, sports wear, dark clothes, wool, duvet/curtains).

Easy Care

40 ℃ (Cold to 60 ℃) Max. Load: 4 kg

Description Washes clothes that do not need ironing after washing.

• Use for Polyamide, acrylic, polyester.

Silent Wash

40 ℃ (Cold to 60 ℃)

Max. Load: 5 kg

Description Washes clothes with less noise and vibration than other washing

programmes.

• Use for lightly soiled white cotton (underwear).

Allergy Care

60 ℃

Max. Load: 4 kg

Description Helps minimise substances that cause an allergic reaction.

• Use for cotton, underwear, pillow covers, bed sheets, baby wear.

global_main.book.book Page 23 Monday, August 23, 2021 3:24 PM

OPERATION

Delicates

20 ℃ (Cold to 40 ℃)

Max. Load: 3 kg

Description Washes machine-washable lingerie, sheer and lacy clothes.

Hand/Wool

30 ℃ (Cold to 40 ℃)

Max. Load: 2 kg

Description Washes hand-washable and machine-washable delicate clothes such

as washable wool, lingerie, dresses etc.

• Use detergent for machine washable woolens

Sportswear

40 ℃ (Cold to 40 ℃)

Max. Load: 3 kg

Description Washes special garments like sports and outdoor wear.

• Use for water-repellent fabric laminate used on clothing.

Speed 14

20 ℃ (20 ℃ to 40 ℃)

Max. Load: 2 kg

Description Washes small loads of lightly soiled clothes for approximately 14

minutes.

Max. Load: 2.5 kg (1

Duvet

Cold (Cold to 40 ℃)

down duvet)

Description Washes large items such as bed covers, pillows, sofa covers, etc.

Tub Clean

Description This function helps clean the inside of your appliance's tub.

Download Cycle

Description This programme allows you to download a new and special washing

programme to your appliance with a smartphone. The default

programme is Rinse+Spin

NOTE

• Select the appropriate water temperature for chosen wash programme. Always

follow garment manufacturer’s care label or instructions when washing to avoid

damage to clothes.

• Select the proper wash temperature and spin speed for the desired programmes.

• Actual water temperature may differ from the declared cycle temperature.

global_main.book.book Page 24 Monday, August 23, 2021 3:24 PM

OPERATION

NOTE

• Neutral detergent is recommended.

Extra Options

*1 This option is automatically inserted in the programme and can not be deselected.

NOTE

•

Rinse+

Delay End and Add Item options can be selected for every washing

programme in this table.

Programme

Cotton

Steam

TurboWash

Pre Wash

Intensive

Eco 40-60

TurboWash

Mixed Fabric

Easy Care

Silent Wash

Allergy Care

Delicates

Hand/Wool

Sportswear

Speed 14

Duvet

global_main.book.book Page 25 Monday, August 23, 2021 3:24 PM

OPERATION

Selectable Maximum Spin Speed

Spin Speed

Programme

Default

Available

Cotton

1400 rpm

1200 rpm

1000 rpm

1400 rpm

800 rpm

1400 rpm

800 rpm

400 rpm

1000 rpm

All

Eco 40-60

TurboWash 39

Mixed Fabric

Easy Care

Silent Wash

Allergy Care

Delicates

400 to 1400 rpm

All

Up to 1000 rpm

All

Up to 800 rpm

All

Hand/Wool

Sportswear

Speed 14

Duvet

Up to 1000 rpm

NOTE

• Actual maximum spin speed may vary depending on the load conditions.

global_main.book.book Page 26 Monday, August 23, 2021 3:24 PM

OPERATION

Extra Options and Functions

You can use the extra options and functions to customize the programmes.

• Press and hold the Pre Wash button

Customizing a Washing

for 3 seconds.

Programme

Follow the next steps to customize a

washing programme:

Each programme has default settings

that are selected automatically. You may

also customize these settings using

these buttons.

Prepare the clothes and load the

drum.

Temp.

This button selects the wash

temperature for the selected

programme.

Press the Power button.

Add detergent.

• Press the Temp. button until the

desired setting is lit.

• Select the water temperature suitable

for the type of load you are washing.

Follow the garment fabric care labels

for best results.

Select a washing programme.

Customize the washing programme

(

Temp.

Spin, Rinse+ and Intensive)

Spin

as necessary.

The spin intensity level can be selected

by pressing this button repeatedly.

Press the Start/Pause button.

• Press the Spin button to select spin

speed.

Only Using a Spin Function

NOTE

Prepare the clothes and load the

drum.

• If No of the spin level is selected, the

drum of the washing machine will

rotate before the drainage.

Press the Power button.

• Do not select a washing

programme and do not add a

detergent.

Rinse+

This function is recommended for

people with detergent allergies.

Press the Spin button.

• Press and hold the TurboWash button

for 3 seconds to add rinse once.

Press the Start/Pause button.

Intensive

This function is used to wash normal and

heavily soiled clothes.

global_main.book.book Page 27 Monday, August 23, 2021 3:24 PM

OPERATION

Pre Wash

NOTE

This option is recommended when

washing a heavily soiled load.

• If you select the washing programme,

you will be unable to select a spin only.

If this occurs, press the Power button

twice to cycle the machine off and back

on.

Press the Power button.

Select a washing programme.

Press the Pre Wash button as

necessary.

Using Special Options

You can customize the programmes by

using the following special options:

Press the Start/Pause button.

Steam

Add Item

Adding this option helps provide better

cleaning results.

You can use this option in order to add or

remove clothes after the washing

programme has started.

TurboWash

Adding this option reduces the

programme time but the similar

washing results will be provided.

Press the Power button.

Select a washing programme.

Press the Start/Pause button.

Follow the next steps to use a special

option.

Press the Power button.

Press the Add Item button as

necessary.

Select a washing programme.

Change the washing programme

Open the door after it unlocks itself

and add or remove necessary

clothing items.

(

Rinse+

Temp., Spin and Intensive)

as necessary.

To use special options, press Steam

Close the door and press the Start/

Pause button.

or TurboWash button.

NOTE

Press the Start/Pause button.

• For safety reasons, the door remains

locked when the water level or

temperature inside of the drum is

high. It is not possible to add clothes at

this time.

Using Basic Options

You can customize the programmes by

using the following basic options:

global_main.book.book Page 28 Monday, August 23, 2021 3:24 PM

OPERATION

Delay End

Using the ezDispense

You can set this function so that the

appliance starts automatically and

finishes after a specified time interval.

Use the Dispenser 1 and Dispenser 2

buttons to set up and control the

ezDispense function.

Press the Power button.

Select a washing programme.

Press the Delay End button as

necessary.

Press the Start/Pause button.

NOTE

• Except for LED of the Delay End

button, all LEDs on the control panel

will be turned off within 20 minutes.

This feature may vary depending on

the model purchased.

• The delay time is the time to the end of

the programme, not the start. The

actual running time may vary due to

water temperature, clothes and other

factors.

Dispenser 1 button

Dispenser 2 button

Liquid detergent indicator

Link indicator (Using only liquid

detergent both compartments)

Liquid fabric softener indicator

NOTE

• To cancel the function, the Power

• When the detergent or softener is

button should be pressed.

insufficient;

• Avoid using liquid detergent for this

function.

- In case of pressing the Power

button: The LED will blink and the

chime will sound.

- In case of running the appliance: The

LED will blink.

• The default settings are configured to

dispense the detergent of Dispenser 1

and the fabric softener of Dispenser 2

Changing Dispense Level for a Single

Load

Press the Power button.

global_main.book.book Page 29 Monday, August 23, 2021 3:24 PM

OPERATION

Turn the knob to select the desired

cycle.

• The Delicates, Sportswear, and Tub

Clean cycles turn the ezDispense

function off by default.

Press the Dispenser 1 or Dispenser 2

button to increase or decrease the

dispensed amount from the set

defaults.

Changing Default Dispense

Amounts

The default settings are configured to

dispense 42 ml of detergent and 30 ml

of softener for 4-6 kg of normally soiled

laundry.

Dispensed

Amount^*1

Buttons

Indicator

Detergent should be used according to

the instruction of the detergent

manufacturer and selected according to

type, colour, soiling of the fabric and the

washing temperature.

More (110%)

Normal (100%)

Less (90%)

Press the Power button.

Change default dispense amounts.

•

Dispenser 1 : Press and hold the

Dispenser 1 button for 3 seconds.

•

Dispenser 2 : Press and hold the

Dispenser 2 button for 3 seconds.

Off (0%)

Turn the knob to increase or decrease

the amount of detergent or fabric

softener. The amount is shown in the

display.

• The default amounts can be

increased or decreased in 1 ml

increments, within a range of 9 ml

to 150 ml. The amount dispensed

may vary slightly depending on the

model.

*1 The default settings are

configured to dispense 42 ml of

detergent and 30 ml of softener for

4-6 kg of normally soiled laundry.

Press the Start/Pause button.

NOTE

• Use the manufacturer’s

recommendations on the detergent or

fabric softener package when setting

the ezDispense amounts for a

standard 4-6 kg load.

Save the default changes.

•

Dispenser 1 : Press and hold the

Dispenser 1 button for 3 seconds.

• Most cycles will automatically use the

default amounts you have set,

indicated by the Normal LED light on

the Dispenser 1 and Dispenser 2

buttons.

•

Dispenser 2 : Press and hold the

Dispenser 2 button for 3 seconds.

global_main.book.book Page 30 Monday, August 23, 2021 3:24 PM

OPERATION

Press and hold the Dispenser 1 and

Dispenser 2 buttons at the same

time for 3 seconds to save the

changes.

Using both Dispensers for Liquid

Detergent

Setting the Dispenser 2 for Different

Liquid Detergent Dispenser

Press the Power button.

Press and hold the Dispenser 1 and

Dispenser 2 buttons at the same

time for 3 seconds.

NOTE

• If you set both dispensers for liquid

detergent, you can not use the liquid

softener dispenser for liquid softener.

Press the Dispenser 2 button to light

• If you want to use a liquid softener:

up the

Liquid detergent indicator.

- After the programme is finished,

select Rinse+Spin (Default

programme of Download Cycle) and

add softener directly into the drum

or into the manual main wash

detergent compartment.

Press and hold the Dispenser 1 and

Dispenser 2 buttons at the same

time for 3 seconds to save the

changes.

- If you downloaded a download cycle,

Rinse+Spin is not available.

Cleaning the ezDispense pumping

system

Setting the Dispenser 2 for Same

Liquid Detergent Dispenser

Use this function to change the type of

detergent or softener. This function

cleans residual detergent or softener in

the hose connected to the ezDispense

Press the Power button.

(when changing the type of detergent

or softener).

Press and hold the Dispenser 1 and

Dispenser 2 buttons at the same

time for 3 seconds.

Press the Dispenser 1 button to light

up the

• The

always light on.

Link indicator.

Liquid detergent indicator is

• When the

Link indicator is

selected, the Dispenser 2 button

cannot be operated.

global_main.book.book Page 31 Monday, August 23, 2021 3:24 PM

OPERATION

Settings

NOTE

Child Lock

• Run this function once a month (or

more often if needed) to remove

Use this option to disable the controls.

This function can prevent children from

changing cycles or operating the

appliance.

detergent buildup and other residue.

• If you do not clean the ezDispense

compartment, detergent or softener

will be remained in the connected

hose.

NOTE

• Once this function is set, all buttons

• Using this function may cause some

foam in the drum.

are locked except the Power button.

• When the controls are locked, [L and

the remaining time are alternatively

shown on the display during the wash

while this function is engaged.

• Turning off the power will not reset

this function. You must deactivate this

function before you can access any

other functions.

Wash the ezDispense compartment

that needs to be cleaned. Please refer

to Cleaning the Appliance

Periodically & Performing an

Emergency Water Evacuation in

MAINTENANCE chapter for further

details.

Locking the Control Panel

Fill the water in compartment to be

cleaned up to the MAX line.

Turn on the power.

Press the Power button.

Press and hold the Delay End and

Add Item buttons at the same time

for 3 seconds to activate this function.

Press and hold the Spin button for 3

seconds to clean the connected hose.

When this option is selected, dcL

appears on the display.

• A beeper will sound, and CL will

appear on the display.

Unlocking the Control Panel

Press the Dispenser 1 or Dispenser 2

button to select the compartment to

be cleaned up.

• Both compartments can be cleaned

at the same time.

Turn on the power.

Press and hold the Delay End and

Add Item buttons at the same time

for 3 seconds to deactivate this

function.

Press the Start/Pause button.

Finishes this function within 16

minutes.

Beep On/Off

This appliance plays a melody when it

starts and stops.

global_main.book.book Page 32 Monday, August 23, 2021 3:24 PM

OPERATION

• Press and hold the TurboWash and

Pre Wash buttons simultaneously for

3 seconds to deactivate/activate this

function.

global_main.book.book Page 33 Monday, August 23, 2021 3:24 PM

SMART FUNCTIONS

LG ThinQ Application

The LG ThinQ application allows you to communicate with the appliance using a

smartphone.

Smart Diagnosis

LG ThinQ Application Features

This function provides useful

Communicate with the appliance from a

information for diagnosing and solving

issues with the appliance based on the

pattern of use.

smartphone using the convenient smart

features.

Remote Start

Settings

It allows you to control the appliance

remotely from the LG ThinQ application.

Allows you to set various options on the

appliance and in the application.

Download Cycle

Push Alert

You can download new and special

cycles that are not included in the basic

cycles on the appliance.

A variety of specialty cycles specific to

the appliance can be downloaded to the

successfully registered appliances.

Once cycle download is completed in the

appliance, the appliance keeps the

downloaded cycle until a new cycle is

downloaded.

When the cycle is complete or the

appliance has problems, you have the

option of receiving push notifications on

a smartphone. The notifications are

triggered even if the LG ThinQ

application is off.

NOTE

• If you change your wireless router,

Internet service provider, or password,

delete the registered appliance from

the LG ThinQ application and register

it again.

NOTE

• Only one downloaded cycle can be

stored on the appliance at a time.

• The application is subject to change for

appliance improvement purposes

without notice to users.

Tub Clean Coach

This function shows how many cycles

remain before it is time to run the Tub

Clean function.

• Functions may vary by model.

Energy Monitoring

This function checks the energy

consumption of the recently used cycles

and monthly average.

global_main.book.book Page 34 Monday, August 23, 2021 3:24 PM

SMART FUNCTIONS

service provider or refer to your

wireless router manual.

LG ThinQ is not responsible for any

network connection problems or any

faults, malfunctions, or errors caused

by network connection.

Before Using LG ThinQ

Application

•

Check the distance between the

appliance and the wireless router (Wi-

Fi network).

• If the appliance is having trouble

connecting to the Wi-Fi network, it may

be too far from the router. Purchase a

Wi-Fi repeater (range extender) to

improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect

or may be interrupted because of the

home network environment.

• If the distance between the

appliance and the wireless router is

too far, the signal strength

becomes weak. It may take a long

time to register or installation may

fail.

Turn off the Mobile data or Cellular

Data on your smartphone.

• The network connection may not work

properly depending on the Internet

service provider.

• The surrounding wireless environment

can make the wireless network service

run slowly.

• The appliance cannot be registered

due to problems with the wireless

signal transmission. Unplug the

appliance and wait about a minute

before trying again.

• If the firewall on your wireless router is

enabled, disable the firewall or add an

exception to it.

Connect your smartphone to the

wireless router.

• The wireless network name (SSID)

should be a combination of English

letters and numbers. (Do not use

special characters.)

• Smartphone user interface (UI) may

vary depending on the mobile

operating system (OS) and the

manufacturer.

• If the security protocol of the router is

set to WEP, you may fail to set up the

network. Please change it to other

security protocols (WPA2 is

NOTE

• To verify the Wi-Fi connection, check

that

• The appliance supports 2.4 GHz Wi-Fi

networks only. To check your network

frequency, contact your Internet

icon on the control panel is lit.

recommended) and register the

product again.

global_main.book.book Page 35 Monday, August 23, 2021 3:24 PM

SMART FUNCTIONS

Press and hold Remote Start button

for 3 seconds to enable the remote

control function.

Installing the LG ThinQ

Application

Search for the LG ThinQ application

from the Google Play Store or Apple App

Store on a smartphone. Follow

instructions to download and install the

application.

Start a cycle from the LG ThinQ

application on your smartphone.

NOTE

• Once this function is enabled, you can

only start a cycle from the LG ThinQ

smartphone application. If the cycle is

not started, the appliance will wait to

start the cycle until it is turned off

remotely from the application or this

function is disabled.

Activating Network Connection

Run the LG ThinQ application.

Select and touch the Front Load

Washer in the application.

• If the door has been opened, you can

not start a cycle remotely.

Press the Power button on the

control panel.

Disable this function manually

When this function is activated, press

and hold the Remote Start button for 3

seconds.

Press and hold Wi-Fi button for 3

seconds on the control panel.

• The Wi-Fi LED blinks during the

connection process.

Deactivating Network

Connection

Using the Appliance Remotely

Press the Power button on the

Remote Start

control panel.

Use a smartphone to control your

appliance remotely. You can also

monitor your cycle operation so you

know how much time is left in the cycle.

Press and hold the Spin and Delay

End buttons simultaneously for 3

seconds to deactivate Network

Connection.

Using this function

Put the clothes into the drum.

• If desired, add bleach or fabric

softener to the appropriate areas of

the dispenser.

Standby Power Consumption

Standby power consumption

0.5 W

2.0 W

Network standby power

consumption

Press the Power button.

global_main.book.book Page 36 Monday, August 23, 2021 3:24 PM

SMART FUNCTIONS

The period of time after which 20

the power management

function, or a similar function, tes

switches the equipment

automatically into standby

and/or off mode and/or the

condition providing

minu

networked standby

NOTE

• The activation of the network

connection may increase the power

consumption of the appliance.

Open Source Software Notice

Information

To obtain the source code under GPL,

LGPL, MPL, and other open source

licenses, that is contained in this

product, please visit http://

opensource.lge.com.

In addition to the source code, all

referred license terms, warranty

disclaimers and copyright notices are

available for download.

LG Electronics will also provide open

source code to you on CD-ROM for a

charge covering the cost of performing

such distribution (such as the cost of

media, shipping, and handling) upon

email request to [email protected].

This offer is valid for a period of three

years after our last shipment of this

product. This offer is valid to anyone in

receipt of this information.

global_main.book.book Page 37 Monday, August 23, 2021 3:24 PM

SMART FUNCTIONS

d logo.

Smart Diagnosis

This feature is only available on models with the

Use this feature to help you diagnose and solve problems with your appliance.

NOTE

• For reasons not attributable to LGE’s negligence, the service may not operate due

to external factors such as, but not limited to, Wi-Fi unavailability, Wi-Fi

disconnection, local app store policy, or app unavailability.

• The feature may be subject to change without prior notice and may have a different

form depending on where you are located.

Place the mouthpiece of your

Using LG ThinQ to Diagnose

Issues

If you experience a problem with your

Wi-Fi equipped appliance, it can transmit

troubleshooting data to a smartphone

using the LG ThinQ application.

smartphone close to the

logo.

Max

10 mm

• Launch the LG ThinQ application and

select the Smart Diagnosis feature in

the menu. Follow the instructions

provided in the LG ThinQ application.

Press and hold the Temp. button for

3 seconds or longer while holding the

smartphone mouthpiece to the logo

until the data transfer is complete.

• Keep the smartphone in place until

the data transfer has finished. Time

remaining for data transfer is

displayed.

Using Audible Diagnosis to

Diagnose Issues

Follow the instructions below to use the

audible diagnosis method.

• Launch the LG ThinQ application and

select the Smart Diagnosis feature in

the menu. Follow the instructions for

audible diagnosis provided in the LG

ThinQ application.

After the data transfer is complete,

the diagnosis will be displayed in the

application.

Press the Power button to turn on

the appliance.

• Do not press any other buttons.

NOTE

• For best results, do not move the

smartphone while the tones are being

transmitted.

global_main.book.book Page 38 Monday, August 23, 2021 3:24 PM

MAINTENANCE

WARNING

• Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to

follow this warning may result in serious injury, fire, electric shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance.

They may damage the finish.

Cleaning After Every Wash

What to Clean

Cleaning the Exterior

Always remove items from the washing

machine as soon as the cycle is

Proper care of your appliance can extend

the service life.

complete. Leaving damp items in the

washing machine can cause wrinkling,

colour transfer, and odour.

Exterior

• Immediately wipe off any spills.

• After the wash cycle is finished, wipe

the door and door seal to remove any

moisture.

• Wipe with a damp cloth and then again

with a dry cloth ensuring there is no

moisture in cabinet joints or crevices.

• Leave the door slightly open to dry the

drum.

• Do not press on the surface or the

display with sharp objects.

• Wipe the appliance with a dry cloth to

remove any moisture.

Door

• Wash with a damp cloth on the outside

and inside and then dry with a soft

cloth.

WARNING

• Do not attempt to separate any panels

or disassemble the appliance. Do not

apply any sharp objects to the control

panel in order to operate the

appliance.

WARNING

• Leave the door open to dry inside of

the appliance only if the children are

supervised at home.

global_main.book.book Page 39 Monday, August 23, 2021 3:24 PM

MAINTENANCE

Cleaning the Appliance Periodically & Performing an

Emergency Water Evacuation

Leave the door open to dry the inside

of the appliance completely.

• When the inside of the appliance is

not dried completely, it may cause a

bad smell or mildew.

Tub Clean

This is a special function to help clean the

inside of the appliance by soaking,

washing, rinsing and spinning.

Run this function once a month (or

more often if needed) to reduce build-up

of detergent and softener and other

residue.

• If there is a bad smell or mildew inside

the appliance, run this function once a

week for 3 weeks in addition to the

regularly prompted intervals.

WARNING

• Leave the door open to dry inside of

the appliance only if the children are

supervised at home.

Cleaning the Water Inlet Filter

NOTE

The water inlet filter collects lime or any

sediment that may be in water that is

supplied to the appliance. Clean the inlet

filter every six months or so, or more

often if the water is very hard or contains

traces of limescale.

• The tcL message will be displayed to

alert to the recommendation of

operating this function.

Remove any clothing or items from

the appliance and close the door.

• Turn off the water supply taps to the

appliance if the appliance is to be left

for a certain period of time (e.g.

Open the dispenser drawer and add

anti limescale powder to the main

wash compartment.

holiday), especially if there is no floor

drain (gully) in the immediate vicinity.

•

1E error message will be displayed on

the control panel when the water is not

entering the detergent drawer.

• Tablets can be placed directly into

the drum as an alternative to

powder.

Turn off the power and the water tap

and then unscrew the water inlet

hose.

Close the dispenser drawer slowly.

Turn on the power, and then select

the Tub Clean

Press the Start/Pause button to

start.

global_main.book.book Page 40 Monday, August 23, 2021 3:24 PM

MAINTENANCE

Remove the water inlet filter with

small pliers and then clean the filter

using a medium bristle tooth brush.

Remove the drain plug from the drain

tube first , and then drain the

water. Then slowly unscrew the drain

pump filter

to drain the remaining

water and then proceed to remove

any debris or objects from the filter.

Cleaning the Drain Pump Filter

and Performing an Emergency

Water Evacuation

The drain filter collects threads and small

objects that may have been accidentally

left in the clothes. Make sure that the

filter is clean every six months to ensure

smooth running of your appliance.

Allow the water to cool before cleaning

the drain pump filter. Open the door in

an emergency or perform an emergency

water evacuation.

After cleaning the drain pump filter,

carefully reinsert the filter and screw

the drain cap back in clockwise

carefully to avoid cross threading and

leakage. Reinsert the plug back into

the drain tube and place the tube into

its holder.

Close the cover cap.

Unplug the appliance.

CAUTION

Open the cover cap and pull out the

drain tube.

• Be careful when draining, as the water

may be hot.

• Run the drum cleaning programme

once a month (or more often, as

needed) to remove excess detergent

and other debris.

global_main.book.book Page 41 Monday, August 23, 2021 3:24 PM

MAINTENANCE

Open the lids.

Cleaning the ezDispense

Drawer

Clean the ezDispense compartments

every time you refill the detergent/

softener or change to a new type of

detergent/softener.

Remove and clean the detergent

dispenser drawer once or twice a

month. Leaving detergent in the

detergent dispenser drawer for an

extended period or using the washing

machine for a long time may cause the

build-up of residue in the detergent

dispenser drawer.

Clean the inserts with warm water.

• Rinse the drawer in warm water to

dissolve the detergent residue or

softener scale.

• Use a soft cloth or brush to remove

any residue.

WARNING

• Do not spray water inside the washing

machine. Doing so may cause fire or

electric shock.

• Do not use soap when cleaning the

drawer and inserts.

If the detergent or softener is

hardened inside the ezDispense

compartments, remove the covers on

the drawer.

Turn off the washing machine, and

unplug the power cord.

Pull out the detergent dispenser

drawer until it stops.

Press down the disengage button

to completely remove the drawer.

Clean the insides of the

compartments with warm water.

• Use a soft cloth or brush to clean

and to remove any residue.

global_main.book.book Page 42 Monday, August 23, 2021 3:24 PM

MAINTENANCE

• Do not use soap when cleaning the

drawer and inserts.

Securely close the covers on the

ezDispense compartments.

Wipe off any moisture with a dry

towel or cloth after cleaning.

10 Reinsert the detergent dispenser

drawer.

global_main.book.book Page 43 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Operation of your appliance can lead to errors and malfunctions. The following tables

contain possible causes and notes for resolving an error message or malfunction. It

is recommended to read the tables carefully below in order to save your time and

money that may cost for calling to LG Electronics service centre.

Before Calling for Service

Your appliance is equipped with an automatic error-monitoring system to detect and

diagnose problems at an early stage. If the appliance does not function properly or

does not function at all, check the following tables before calling to LG Electronics

service centre.

Error Messages

Symptoms

Possible Cause & Solution

Water supply is not adequate in that location. Water does

not enter appliance or it enters slowly.

• Check another tap in the house.

INLET ERROR

Water supply tap is not completely open. Water does not

enter the appliance or it enters slowly.

• Open fully tap.

Water supply hose(s) are kinked.

• Straighten hose or reinstall the water inlet hose

The filter of the supply hose(s) are clogged.

• Check and clean the inlet valve filter after turning off the

taps and removing the hose connections to the washing

machine.

global_main.book.book Page 44 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Possible Cause & Solution

The appliance has a system which detects and corrects

the unbalance of the appliance.

• The clothes may be too wet at the end of the cycle,

rearrange the load to allow proper spinning. Close the door

and press Start/Pause button. It may take a few moments

before the appliance begins to spin. The door must be

locked before spin can be achieved.

UNBALANCE

ERROR

Load is too small. This system may stop spinning or even

interrupt the spin cycle altogether if individual heavy

articles (e.g. bath mat, bath robe, etc.) are loaded.

• Add 1 or 2 similar items or smaller articles of clothes to help

balance the load. Close the door and press Start/Pause

button. It may take a few moments before the appliance

begins to spin. The door must be locked before spin can be

achieved.

Drain hose is kinked or clogged. Water in the appliance

does not drain or drains slowly.

• Clean and straighten the drain hose.

WATER OUTLET

ERROR

The drain filter is clogged.

• Check and clean the drain filter.

Door sensor malfunctions.

dE dE1 dEz dE4

• Please call LG service centre. You can find your local LG

service centre phone number in the warranty card.

DOOR ERROR

This is a control error.

• Unplug the power plug and call for service.

CONTROL ERROR

Over load in motor.

• Let the appliance wait for 30 minutes until the motor is

cooled down and then, restart the cycle.

MOTOR LOCKED

ERROR

Water overfills due to a possible faulty water valve.

• Close the water tap. Unplug the power plug. Call for service.

OVERFLOW ERROR

Water level sensor malfunctions.

• Close the water tap. Unplug the power plug. Call for service.

PRESSURE SENSOR

ERROR

Vibration sensor malfunctions.

• Call for service.

VIBRATION

SENSOR ERROR

global_main.book.book Page 45 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Possible Cause & Solution

Is supply/drain hose or drain pump frozen?

• Supply warm water into the drum in order to unfreeze the

drain hose and the drain pump. Cover the supply hose with

wet and warm towel.

FROZEN FAILURE

Water leaks.

• Call for service.

WATER LEAKAGE

Power failure or inadequate electrical service may have

occurred during operation.

• Press the Start/Pause button to restart the cycle.

POWER FAILURE

ezDispense Error Messages

Symptoms

Possible Cause & Solution

The amount of liquid detergent in the detergent

compartment did not decrease.

After putting the detergent into the detergent

compartment, it was left for a long time and the

detergent hardened.

E d1

ezDispense ERROR

• Clean the detergent compartment thoroughly, fill it with

liquid detergent, install it in the drawer, and run a wash

cycle. If E d1 is displayed continuously, call for service.

The amount of liquid detergent in the detergent

compartment did not decrease.

• Call for service.

E dz

ezDispense ERROR

The amount of fabric softener in the liquid fabric softener

or liquid detergent compartment did not decrease.

After putting the fabric softener into the liquid fabric

softener or liquid detergent compartment, it was left for

a long time and the fabric softener hardened.

E d3

ezDispense ERROR

• Clean the liquid fabric softener or liquid detergent

compartment thoroughly, fill it with liquid fabric softener,

install it in the drawer, and run a wash cycle. If E d3 is

displayed continuously, call for service.

global_main.book.book Page 46 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Possible Cause & Solution

The amount of liquid fabric softener in the liquid fabric

softener or liquid detergent compartment did not

decrease.

E d4

ezDispense ERROR

• Call for service.

The amount of liquid detergent or fabric softener in the

liquid fabric softener or liquid detergent compartment

did not decrease.

E ds

ezDispense ERROR

• Call for service.

The washer was operated without completely closing the

drawer.

The drawer was opened during the washer operation.

O PN

ezDispense OPEN

ERROR

• Push the drawer completely closed. If O PN is displayed

continuously, call for service.

Noises You Might Hear

Symptoms

Possible Cause & Solution

Rattling and

clanking noise

Foreign objects, such as keys, coins, or safety pins may be

in the drum.

• Stop the appliance, check the drum for foreign objects. If

the noise continues after the appliance is restarted, call for

service.

Thumping sound

Heavy clothes may produce a thumping sound. This is

usually normal.

• If the sound continues, the appliance is probably out of

balance. Stop and redistribute the clothes.

The clothes may be out of balance.

• Pause the programme and redistribute the clothes after

the door unlocks.

global_main.book.book Page 47 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Possible Cause & Solution

Package materials are not removed.

Vibrating noise

• Remove package materials.

The clothes may be unevenly distributed in the drum.

• Pause the programme and redistribute the clothes after

the door unlocks.

Not all levelling feet are resting firmly and evenly on the

floor.

• See the Levelling the Appliance instruction to adjust the

levelling of the appliance.

Floor not rigid enough.

• Check if the floor is sold and does not flex. See the

Installation Place Requirements to select the proper

location.

Operation

Symptoms

Possible Cause & Solution

Water is leaking.

House drain pipes are clogged.

• Unclog waste pipes. Contact plumber if necessary.

Leakage is caused by improper installation of drain hose

or clogged drain hose.

• Clean and straighten the drain hose. Check and clean the

drain filter regularly.

Drain pump filter cap is not fitted correctly.

• Refit the drain pump filter.

global_main.book.book Page 48 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Possible Cause & Solution

Appliance does

not operate.

Control panel has powered off due to inactivity.

• This is normal. Press the Power button to turn the

appliance on.

Appliance is unplugged.

• Make sure that the cord is plugged securely into a working

outlet.

Water supply is turned off.

• Turn the water supply tap completely.

Controls are not set properly.

• Make sure that the programme is correctly set. Close the

door and press the Start/Pause button.

Door is open.

• Close the door and make sure that nothing is caught under

the door preventing it from closing completely.

Circuit breaker/fuse is tripped/blown.

• Check house circuit breakers/fuses. Replace fuses or reset

breaker. The appliance should be on a dedicated branch

circuit. The appliance will resume the programme where it

stopped once power is restored.

Appliance does

not operate.

Control needs to be reset.

• Press the Power button, then reselect the desired

programme and press the Start/Pause button.

Start/Pause was not pressed after a programme was set.

• Press the Power button, then reselect the desired

programme and press the Start/Pause button. The

appliance is turned off if the Start/Pause button is not

pressed within a certain time.

Extremely low water pressure.

• Check another tap in the house to make sure that

household water pressure is adequate.

Appliance is heating the water or making steam.

• The drum may stop operating temporarily during certain

cycles, while water is safely heated to a set temperature.

Buttons may not

function properly.

The Child Lock option is activated.

• Deactivate the Child Lock option if necessary.

global_main.book.book Page 49 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Possible Cause & Solution

Door does not

open.

The door cannot be opened for safety reasons once the

appliance starts.

• This is normal. You can safely open the door after

off.

turns

Appliance is not

filling properly.

Inlet filter clogged.

• Make sure the inlet filters on the fill valves are not clogged.

Inlet hoses may be kinked.

• Check that inlet hoses are not kinked or clogged.

Insufficient water supply.

• Make sure that both hot and cold water taps are turned on

all the way.

Hot and cold supply hoses are reversed.

• Check supply hose connections.

Appliance does

not drain water.

Kinked drain hose.

• Ensure that the drain hose is not kinked.

Drain located higher than 1.2 m above the floor.

• Make sure that the drain hose is no higher than 1.2 m above

the bottom of the appliance.

Detergent is not

dispensed

completely or not

dispensed at all.

Too much detergent is used.

• Follow the guidelines provided by the detergent

manufacturer.

Drain Pump Filter may be blocked.

• Clean the Drain filter.

Cycle time is

longer than usual.

The load is too small.

• Add more items to allow the appliance to balance the loads.

Heavy articles are mixed with lighter items.

• Always try to wash articles with similar weight in order to

allow the appliance to evenly distribute the weight of the

load for spinning.

The load is out of balance.

• Manually redistribute the load if articles have become

tangled.

global_main.book.book Page 50 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Possible Cause & Solution

Cycle end is

delayed

Unbalance is detected or suds removing programme is

on.

• This is normal. The time remaining shown on the display is

only an estimated duration. Actual time may vary.

Performance

Symptoms

Possible Cause & Solution

Previously set stains.

• Articles that have been previously washed may have stains

which have been set. These stains may be difficult to

remove and may require hand washing or pre-treating to

aid in stain removal.

Poor stain

removal

Staining

Bleach or softener is dispensed too soon.

• Dispenser compartment is overfilled. It makes bleach or

softer dispensed rapidly. Always measure bleach or

softener to prevent overfilling.

• Close the detergent dispenser slowly.

Bleach or softener was added directly to the clothes in the

drum.

• Always use the detergent dispenser to ensure that bleach

or softener is properly dispensed at the right time in the

programme.

Clothes were not properly sorted.

• Always wash dark colours separately from light colours and

whites to prevent discoloration.

• Never wash heavily soiled items with lightly soiled items.

global_main.book.book Page 51 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Wrinkling

Possible Cause & Solution

Appliance is not unloaded promptly.

• Always remove items from the appliance as soon as the

programme is complete.

Appliance is overloaded.

• The appliance can be fully loaded, but the drum should not

be tightly packed with items. The door of the appliance

should be closed easily.

Hot and cold water supply hoses are reversed.

• Hot water rinse can set wrinkles in garments. Check the

supply hose connections.

Spin speed may be too high.

• Set the spin speed to suit the garment type.

Odour

Symptoms

Possible Cause & Solution

Musty or mildewy Inside of drum is not cleaned properly.

odour in appliance

• Run the Tub Clean function regularly.

Odours can occur if the drain hose is not properly

installed, causing siphoning (water flowing back inside of

the appliance).

• When installing the drain hose, make sure that it does not

get kinked or blocked.

If the detergent dispenser is not cleaned regularly,

odours can occur from mold or foreign substances.

• Remove and clean the detergent dispenser, especially the

top and bottom of the dispenser’s opening.

global_main.book.book Page 52 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

ezDispense

Symptoms

Possible Cause & Solution

Refill Alarm

Detergent/softener has built up on the fluid level sensor.

continues to

display when

detergent/

• Open the compartment covers and clean the insides of the

ezDispense compartments with warm water. Use a soft

brush to remove any residue. If the Refill Alarm is

displayed continuously, call for service.

softener is added.

The amount of detergent/softner is not enough for the

sensor to detect.

• Fill the detergent/softner up to the MAX line in the

compartment.

Too much/too

The default dispense amounts setting may need to be

little detergent or changed.

softener

dispensed.

• Check and change the default dispense amounts setting.

The ezDispense

doesn't dispense

detergent/

The ezDispense function is off.

• Turn on the ezDispense function.

The ventilation holes are blocked.

• Clean the ventilation holes for the lids on the

compartments with warm water.

softener.

The detergent or softener in the ezDispense

compartments has hardened.

• Clean the ezDispense compartments and change the

detergent or softener.

There's foam on

the rinsing course,

and there's

detergent left on

the clothes after

the washing.

Detergent was used when rinsing.

• Please make sure that the detergent/softner is stored

correctly. (right: detergent / left: softener)

After the washing, You need to clean the inside of the ezDispense system.

there's a scum on

the cloth.

• When using both dispensers for liquid detergent, make

sure to run the ezDispense Nozzle Clean in advance.

global_main.book.book Page 53 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Symptoms

Detergent,

Possible Cause & Solution

You need the ezDispense compartment's horizontal

maintenance.

softener leaks

from the lid of the

ezDispense

• Leakage occurs when the ezDispense compartment is

tilted. Slide the ezDispense compartment out or in slowly

compartments.

and use both hands for safety.

The lid isn't fully closed.

• Securely close the lids to the ezDispense compartments. Be

careful not to lose the lids.

Wi-Fi

Symptoms

Possible Cause & Solution

Your home

The password for the Wi-Fi that you are trying to connect

to is incorrect.

appliance and

smartphone are

not connected to

the Wi-Fi network.

• Find the Wi-Fi network connected to your smartphone and

remove it, then register your appliance on LG ThinQ

Mobile data for your smartphone is turned on.

• Turn off the Mobile data of your smartphone and register

the appliance using the Wi-Fi network.

The wireless network name (SSID) is set incorrectly.

• The wireless network name (SSID) should be a combination

of English letters and numbers. (Do not use special

characters).

The router frequency is not 2.4 GHz.

• Only a 2.4 GHz router frequency is supported. Set the

wireless router to 2.4 GHz and connect the appliance to the

wireless router. To check the router frequency, check with

your internet service provider or the router manufacturer.

The distance between the appliance and the router is too

far.

• If the distance between the appliance and the router is too

far, the signal may be weak and the connection may not be

configured correctly. Move the location of the router so that

it is closer to the appliance.

global_main.book.book Page 54 Monday, August 23, 2021 3:24 PM

TROUBLESHOOTING

Customer Care and Service

Contact an LG Electronics customer information centre.

• To find an LG Electronics authorised service personnel, visit our website at

www.lg.com and follow the instructions found there.

• Self-repair is not recommended as it could further damage the device and void the

guarantee.

• Spare parts referenced in Regulation 2019/2023 are available for a minimum

duration of 10 years.

global_main.book.book Page 55 Monday, August 23, 2021 3:24 PM

INSTALLATION

Parts and Specifications

NOTE

• Appearance and specifications may change without notice to improve the quality

of the appliance.

Front View

Index

Part Name

Index

Part Name

Cover Cap

Detergent Dispenser

Drawer

Door

Drain Plug

Levelling Feet

Control Panel

Drain Pump Filger

global_main.book.book Page 56 Monday, August 23, 2021 3:24 PM

INSTALLATION

Rear View

Index

Part Name

Power Plug

Transit Bolts

Index

Part Name

Drain Hose

global_main.book.book Page 57 Monday, August 23, 2021 3:24 PM

INSTALLATION

Accessories

*1 The included accessories vary depending on the model you purchased.

Cold Supply Hose

Spanner

Anti–slip Sheets*1

Elbow Bracket for Securing Drain Hose

Caps for Covering Transit Bolt Holes

Tie Strap*1

global_main.book.book Page 58 Monday, August 23, 2021 3:24 PM

INSTALLATION

Installation Place Requirements

Before installing the appliance, check the following information to make sure that the

appliance should be installed in a correct place.

Installation Location

Index

Clearance (mm)

• This appliance must be installed on

firm flooring to minimize vibration

during the spin cycle. Concrete

flooring is best, being far less prone to

vibration during the spin cycle than

wooden floorboards or a carpeted

surface.

100

• If it is impossible to avoid positioning

the appliance next to a gas cooker or

coal burning stove, an insulation (850 X

600 mm) covered with aluminum foil

on the side facing the cooker or stove

must be inserted between the two

appliances.

WARNING

• This appliance must only be used for

domestic household purposes and

should not be used in mobile

applications.

• Ensure that when the appliance is

installed, it is easily accessible for an

engineer in the event of a breakdown.

• When installing the appliance, adjust

all four feet using the transit bolt

spanner provided to ensure the

appliance is stable.

NOTE

• Never try to level any uneven floor by

putting pieces of wood, cardboard or

similar materials under the appliance.

Wooden Floors (Suspended

Floors)

Floor Installation

To ensure sufficient clearance for water

inlet hoses, drain hose and airflow, allow

minimum clearances of at least 20 mm at

the sides and 100 mm behind the

appliance. Be sure to allow for wall, door,

or floor moldings that may increase the

required clearances.

When installing the appliance on

wooden floors, use rubber cups to

reduce excessive vibration and

unbalance. Timber or suspended type

flooring may contribute to excessive

vibration and unbalance, errors and

malfunction.

global_main.book.book Page 59 Monday, August 23, 2021 3:24 PM

INSTALLATION

• To reduce vibration, we recommend

Electrical Connection

• Do not use an extension cord or

double adapter.

• Always unplug the appliance and turn

off the water supply after use.

• Connect the appliance to an earthed

socket in accordance with current

wiring regulations.

• The appliance must be positioned so

that the plug is easily accessible.

• Power outlet must be within 1 meter of

either side of the appliance.

placing at least 15 mm thickness of

rubber cups

under each adjusting

foot of the appliance, secured to at

least two floor beams with screws.

• If possible, install the appliance in one

of the corners of the room, where the

floor is more stable.

• Fit the rubber cups to reduce vibration.

CAUTION

• If the appliance is installed on the

unstable floor (e.g. wooden floor), the

warranty does not cover any damages

and cost occurred due to the

WARNING

installation on the unstable floor.

• Repairs to the appliance must only be

carried out by qualified personnel.

Repairs carried out by inexperienced

persons may cause injury or serious

malfunctioning. Contact your local

authorised LG repairer.

NOTE

• You can purchase rubber cups (part

No. 4620ER4002B) from the LG service

centre.

• The power plug must be plugged into

an appropriate outlet socket that is

installed and grounded/earthed in

accordance with all local codes and

ordinances.

Ventilation

• Make sure that air circulation around

the appliance should not be impeded

by carpets, rugs, etc.

Ambient Temperature

• Do not install the appliance in rooms

where freezing temperatures may

occur. Frozen hoses may burst under

pressure. The reliability of the

electronic control unit may be

impaired at temperatures below

freezing point.

• If the appliance is delivered in winter

and temperatures are below freezing,

place the appliance at room

temperature for a few hours before

putting it into operation.

global_main.book.book Page 60 Monday, August 23, 2021 3:24 PM

INSTALLATION

Unpacking the Appliance

fully loosen all transit bolts by turning

them counterclockwise.

Lifting the Appliance Off the

Foam Base

* This feature may vary depending on

the model purchased.

After removing the carton and shipping

material, lift the appliance off the foam

base.

Remove the bolt assemblies by

wiggling them slightly while pulling

them out.

Install the hole caps.

• Locate the hole caps

included in

• Make sure the tub support

off with the base and is not stuck to the

bottom of the appliance.

* comes

the accessory pack or attached on

the back.

• If you must lay the appliance down to

remove the carton base

, always

protect the side of the appliance and

lay it carefully on its side. Do not lay the

appliance on its front or back.

Removing the Transit Bolt

Assemblies

NOTE

To prevent the appliance from severe

vibration and breakage, remove transit

bolts and retainers.

• Save the transit bolts and retainers for

future use.

• Transport this appliance for the

prevention of breakage as below:

- The transit bolts are reinstalled.

Starting with the bottom two transit

bolts , use the spanner (included) to

- The power cord is secured to the

back of the appliance.

global_main.book.book Page 61 Monday, August 23, 2021 3:24 PM

INSTALLATION

Levelling the Appliance

• Make sure that all four feet are

stable and resting on the floor.

Checking the Level

When pushing down the edges of the

top plate diagonally, the appliance

should not move up and down at all

(check both directions).

• If the appliance rocks when pushing

the top plate of the appliance

diagonally, adjust the feet again.

• Check whether the appliance is

perfectly level after installation.

NOTE

• Timber or suspended type flooring

may contribute to excessive vibration

and unbalance. Reinforcement or

bracing of the timber floor may need

to be considered to stop or reduce

excessive noise and vibration.

NOTE

• Do not install the washing machine on

a plinth, stand or elevated surface

unless it is manufactured by LG

Electronics for use with this model.

Adjusting and Levelling the

Feet

When installing the appliance, the

appliance should be aligned and

perfectly level. If the appliance is not

aligned and level properly, the appliance

may be damaged or may not operate

properly.

Check if the appliance is perfectly

level using a spirit level

Turn the levelling feet as required if

the floor is uneven.

Secure the levelling feet with the lock

nuts by turning anti-clockwise

against the bottom of the appliance.

• Do not insert pieces of wood etc.

under the feet.

global_main.book.book Page 62 Monday, August 23, 2021 3:24 PM

INSTALLATION

Check if all lock nuts at the bottom of

the appliance are secured properly.

feet. If it is difficult to place the

sheets under the front feet of the

appliance, attach them under the

rear feet.

NOTE

• Proper placement and levelling of the

appliance will ensure long, regular,

and reliable operation.

• The appliance must be 100%

horizontal and stand firmly in position

on a hard flat floor.

• It must not ‘Seesaw’ across corners

under the load.

• Do not let the feet of the appliance get

wet. Failure to do so may cause

vibration or noise.

Put the appliance on the anti-slip

sheets.

• Do not attach the adhesive side

of anti-slip sheets to the feet of the

appliance.

Using Anti-Slip Sheets

NOTE

This feature may vary depending on the

• Additional anti-slip sheets are available

model purchased.

at LG Electronics service centre.

If you install the appliance on a slippery

surface, it may move because of

excessive vibration. Incorrect levelling

may cause malfunction through noise

and vibration. If this occurs, install the

anti-slip sheets under the levelling feet

and adjust the level.

Clean the floor to attach the anti-slip

sheets.

• Use a dry rag to remove and clean

foreign objects and moisture. If

moisture remains, the anti-slip

sheets may slip.

Adjust the level after placing the

appliance in the installation area.

Place the adhesive side

slip sheets on the floor.

of the anti-

• The most effective way is to install

the anti-slip sheets under the front

global_main.book.book Page 63 Monday, August 23, 2021 3:24 PM

INSTALLATION

Connecting the Water Supply Hose

Note for Connection

Connecting the Hose to the

Water Tap

Connecting Screw-Type Hose to Tap

with Thread

Screw the supply hose connector onto

the water supply tap. Hand tighten only

with the aid of a soft cloth. Do not

overtighten the supply hose with any

mechanical device.

• Water pressure must be between 50

kPa and 800 kPa (0.5‒8.0 kgf/cm²). If

the water pressure is more than 800

kPa, a decompression device should

be installed.

• Periodically check the condition of the

water supply hose and replace the

water supply hose if necessary.

NOTE

• Do not overtighten the water supply

hose or use mechanical devices to

tighten onto the inlet valves.

• No further backflow protection

required for connection to the water

inlet.

Checking the Rubber Seal

Two rubber seals

are supplied with

NOTE

the water supply hose. They are used to

prevent water leaks. Connection to taps

is sufficiently tight.

• After connecting the water inlet hose

to the water tap, turn on the water tap

to flush out foreign substances (dirt,

sand, sawdust, and etc.) in the water

lines. Let the water drain into a bucket,

and check the water temperature.

• Do not use mechanical devices such as

multi grips to tighten the water supply

hose. Ensure that the curved end of

the water supply hose is connected to

the appliance.

global_main.book.book Page 64 Monday, August 23, 2021 3:24 PM

INSTALLATION

Connecting the Hose to the

Appliance

Screw the supply hose to the water inlet

valve on the back of the appliance.

• Do not connect the hose to the hot

water supply for models with one

water inlet. Connect to the cold water

supply only.

NOTE

• After completing connection, if water

leaks from the hose, repeat the same

steps. Use the most conventional type

of tap for the water supply. In case that

the tap is square or too big, remove

the guide plate before inserting the

tap into the adaptor.

• Make sure that the hose should not be

kinked or trapped.

global_main.book.book Page 65 Monday, August 23, 2021 3:24 PM

INSTALLATION

Installing the Drain Hose

Installing the Drain Hose with

the Elbow Bracket

The drain hose should not be placed

higher than 100 cm above the floor.

Water in the appliance may not drain or

may drain slowly.

• Securing the drain hose correctly will

protect the floor from damage due to

water leakage.

105 cm

• If the drain hose is too long, do not

force it back into the appliance. This

will cause abnormal noise.

• When installing the drain hose to a

sink, secure it tightly with string.

global_main.book.book Page 66 Monday, August 23, 2021 3:24 PM

APPENDIX

Technical Data

Consumption Data

Unit Description

kg: Laundry load

h:mm: Programme duration

kWh: Energy consumption

℃: Maximum temperature inside the

treated textile

Litres: Water consumption

rpm: Maximum spin speed

: Remaining moisture at the end of spinning phase. The higher is the spin speed,

the higher is the noise and the lower is the remaining moisture.

Common Programmes

Programme

Cotton 20 ℃

Cotton 60 ℃

Mixed Fabric

Speed 14

h:mm

2:59

3:59

1:21

0:14

4:26

kWh

0.298

1.553

0.603

0.051

0.805

℃

Litres

69.0

70.0

54.0

41.0

95.0

rpm

1350

1000

400

50.0

67.0

106.0

50.0

Cotton 40 ℃ +

Intensive

1350

Eco 40-60

3:48

2:45

2:25

0.755

0.460

0.295

61.0

46.0

42.0

1360

44.8

41.4

46.0

(Full)^*1

Eco 40-60

4.5

2.5

(Half)^*1

Eco 40-60

(Quarter)^*1

*1 It is able to clean normally soiled cotton laundry declared to be washable at 40 ℃

or 60 ℃, together in the same cycle, and that this programme is used to assess the

compliance with the EU ecodesign legislation (EU 2019/2023).

global_main.book.book Page 67 Monday, August 23, 2021 3:24 PM

APPENDIX

NOTE

• The values for the common programs, with the exception of the Eco 40-60 cycle, are

indicative only.

• Scan the QR code on the energy label supplied with the appliance, which provides

a web link to the information related to the performance of the appliance in the EU

EPREL database. Keep the energy label for reference together with the owner's

manual and all other documents supplied with the appliance.

• The model name can be found on the rating label of the appliance, open the door

which is just around the opening to the drum.

• To find the same information in EPREL, visit https://eprel.ec.europa.eu and search

using the model name. (Valid from 1st March 2021)

Note for test institutes

Regulation EU 2019/2023, valid from 1st March 2021, is related to the Energy

Efficiency classes by Regulation EU 2019/2014.

• The test results depend on water pressure, water hardness, water inlet

temperature, room temperature, type and amount of load, degree of soiling

utilized detergent, fluctuations in the main electricity supply and chosen additional

options.

global_main.book.book Page 68 Monday, August 23, 2021 3:24 PM

APPENDIX

Specifications

Description

Value

F4V909WTSA

220‒240 V~, 50 Hz

70 kg

Model Name

Power Supply

Product Weight

Dimension(mm)

D’’

D’

Index

Dimension (mm)

600

850

565

620

1100

global_main.book.book Page 69 Monday, August 23, 2021 3:24 PM

Memo

global_main.book.book Page 70 Monday, August 23, 2021 3:24 PM

Memo

global_main.book.book Page 71 Monday, August 23, 2021 3:24 PM

Memo

global_main.book.book Page 69 Monday, August 23, 2021 3:24 PM

Zebra Technologies 11280100000 User Manual
Whirlpool X10002v1 User Manual
Toshiba Ram Sm800at E User Manual
Toshiba Air Conditioner Mmy Map0804ht8zg E User Manual
Sanyo Kh3672r User Manual
MAYTAG MMV6190FB 02 User Manual
MAKITA UC 3001A User Manual
D LINK DFL 200 User Manual
BROTHER HL L2370DN 02 User Manual
ACER ALTOS EASYSTORE M2 User Manual