BLACK DECKER FSM1630 XE User Manual

Australia  
New Zealand  
FSM1630-XE  
G
H
I
J
K
3
(Original instructions)  
ENGLISH  
Intended use  
Using your appliance  
Your Black & Decker steam mop has been designed for  
sanitising and cleaning sealed hardwood, sealed laminate,  
linoleum, vinyl, ceramic tile, stone and marble floors and for  
refreshing carpets. This appliance is intended for indoor  
household use only.  
u
Do not direct steam at people, ani-  
mals, electrical appliances or electrical  
outlets.  
u
u
u
Do not expose to rain.  
Safety instructions  
Do not immerse the appliance in water.  
Do not leave the appliance unattend-  
ed.  
Warning! Read all  
@
safety warningsFaaniludre to  
u
u
Do not leave the appliance connected  
to an electrical outlet when not in use.  
Never pull the power lead to discon-  
nect the appliance from the socket.  
Keep the appliance lead away from  
heat, oil and sharp edges.  
all instructions.  
follow the warnings and instruc-  
tions listed below may result in  
electric shock, fire and/or seri-  
ous injury.  
u
u
Do not handle steam cleaner with wet  
hands.  
Warning!When using mains-  
@
powered appliances, basic  
Do not pull or carry by cord, use cord  
as a handle, close door on cord, pull  
cord around sharp corners or expose  
cord to heated surfaces.  
safety precautions, including the  
following, should always be fol-  
lowed to reduce the risk of fire,  
electric shock, personal injury  
and material damage.  
u
Do not use appliance in an enclosed  
space filled with vapour given off by  
oil-base paint thinner, some moth-  
proofing substances, flammable dust,  
or other explosive or toxic vapours.  
Check the type of floor with the manu-  
facturer.  
u
u
Read all of this manual carefully be-  
fore using the appliance.  
The intended use is described in this  
manual. The use of any accessory  
or attachment or the performance  
of any operation with this appliance  
other than those recommended in this  
instruction manual may present a risk  
of personal injury.  
u
u
Do not use on leather, wax polished  
furniture or floors, synthetic fabrics,  
velvet or other delicate, steam-sensi-  
tive materials.  
u
Retain this manual for future refer-  
ence.  
4
(Original instructions)  
ENGLISH  
u
u
u
Care should be taken when using this  
appliance. DO NOT touch any parts  
which may become hot during use.  
Switch the appliance off and return the  
handle to the upright position before  
removing the water tank.  
Warning!Do not use on  
unsealed wood or unsealed  
laminate floors. On surfaces that  
have been treated with wax or  
some no wax floors, the sheen  
may be removed by the heat  
and steam action. It is always  
recommended to test an iso-  
lated area of the surface to be  
cleaned before proceeding. We  
also recommend that you check  
the use and care instructions  
from the floor manufacturer.  
@
For floor use only; do not use the unit  
upside down. This appliance is intend-  
ed for indoor household use only.  
After use  
u
u
u
Unplug the appliance and allow to cool  
before cleaning.  
When not in use, the appliance should  
be stored in a dry place.  
u
Never put descaling, aromatic, alco-  
holic or detergent products into the  
steam cleaner, as this may damage it  
or make it unsafe for use.  
Children should not have access to  
stored appliances.  
InUsnppelucgttihoenapapnliadncreeapnadiarlslow to cool  
u
If the home circuit breaker activates  
while using the steam function, dis-  
continue product use immediately and  
contact the customer support centre.  
(Beware of the risk of electrical shock.)  
The appliance emits very hot steam to  
sanitize the area of use. This means  
that the steam head, cleaning pads  
and carpet attachment get very hot  
u
before performing any maintenance or  
repairs.  
u
Before use, check the appliance for  
damaged or defective parts. Check for  
breakage of parts, damage to switches  
and any other conditions that may af-  
fect its operation.  
u
u
u
u
Regularly check the power lead for  
damage.  
u
dCuarinugtiuosen.!Always wear suitable  
shoes when using your steam mop  
and when changing the accessories on  
your steam mop. Do not wear slippers  
or open toed footwear.  
Do not use the appliance if any part is  
damaged or defective.  
Have any damaged or defective parts  
repaired or replaced by an authorized  
repair agent.  
u
u
The lid may become hot during use.  
Steam may escape from the appliance  
during use.  
u
Never attempt to remove or replace  
any parts other than those specified in  
this manual.  
5
(Original instructions)  
ENGLISH  
Electrical safety  
Safety of others  
u
This appliance can be used by children  
aged from 8 years and above and  
persons with reduced physical, sen-  
sory or mental capabilities or lack of  
experience and knowledge if they have  
been given supervision or instruction  
concerning use of the appliance in a  
safe way and understand the hazards  
involved. Children shall not play with  
the appliance. Cleaning and user  
maintenance shall not be made by  
children without supervision.  
Warning!This prod-  
@
uct must be earthed.  
Always check that the  
power supply corre-  
sponds to the voltage  
on the rating plate.  
Power plugs must match the outlet.  
Never modify the plug in any way.  
Unmodified plugs and matching  
outlets will reduce risk of electric  
shock.  
u
If the supply cord is damaged, it must  
be replaced by the manufacturer or  
an authorised Black & Decker Service  
Centre in order to avoid a hazard.  
u
Children should be supervised to  
ensure that they do not play with the  
appliance.  
Residual risks.  
Extension cables & Class 1  
prAo3d-cuocretcable must be used as your  
u
Additional residual risks may arise  
when using the tool which may not  
be included in the enclosed safety  
warnings. These risks can arise  
from misuse, prolonged use etc.  
Even with the application of the  
relevant safety regulations and the  
implementation of safety devices,  
certain residual risks can not be  
avoided. These include:  
appliance is earthed and of Class 1  
construction.  
u
Up to 30m (100 ft) can be used without  
loss of power.  
Labels on the appliance  
The following pictograms are shown on the tool:  
u
u
u
u
Injuries caused by touching any mov-  
ing parts.  
Warning! To reduce the risk of injury, the user  
must read the instruction manual.  
Injuries caused by touching any hot  
parts.  
Injuries caused when changing any  
parts or accessories.  
Warning! Danger of scalding.  
Injuries caused by prolonged use of  
the appliance. When using any appli-  
ance for prolonged periods ensure you  
take regular breaks.  
6
(Original instructions)  
ENGLISH  
Features  
Return the handle (4) to the upright position and turn the  
steam mop ‘OFF’.  
Place the steam mop on the resting mat and wait until it  
This appliance includes some or all of the following features.  
1. ON/Off switch  
2. SmartselectTM button  
3. Removable water tank  
4. Handle  
Place the front of your shoe onto the cleaning pad removal  
5. Steam head  
Lift the steam mop up off the cleaning pad.  
6. Steam head cleaning pad  
7. Delta head cleaning pad  
8. Resting mat  
Caution! Always place the steam mop on the resting mat (8)  
with the handle (4) in the upright position when stationary and  
make sure the steam mop is turned off when not in use.  
9. Carpet glider  
10. Bottom cable tidy hook  
11. Top cable tidy hook  
12. Cable management clip  
Attaching the carpet glider (Fig. F)  
Lightly press the steam mop down onto the carpet glider  
(9) until it clicks into place.  
Assembly  
Caution! Always place the steam mop on the resting mat (8)  
with the handle (4) in the upright position when stationary and  
make sure the steam mop is turned off when not in use.  
Warning! Before attempting any of the following operations,  
make sure that the appliance is switched off and unplugged  
and that the appliance is cold and does not contain any water.  
Removing the carpet glider (Fig. F)  
Caution! Always wear suitable shoes when changing the  
carpet glider on your steam mop. Do not wear slippers or  
open toed footwear.  
Attaching the handle (Fig. A)  
Slide the bottom end of the handle (4) into the top end of  
the steam mop body (13) until it clicks into place.  
Return the handle (4) to the upright position and turn the  
steam mop ‘OFF’.  
Attaching the steam head (Fig. B)  
Slide the bottom end of the steam mop body (13) onto the  
Place the steam mop on the resting mat and wait until it  
steam head (5) until it clicks into place.  
The steam head can be removed from the Steam mop  
body by pressing the steam head release button (14) and  
pulling the steam mop body (13) off the steam head (5).  
Place the front of your shoe onto the carpet glider removal  
Lift the steam mop up off the carpet glider (9).  
Caution! Always place the steam mop on the resting mat (8)  
with the handle (4) in the upright position when stationary and  
make sure the steam mop is turned off when not in use.  
Attaching the water jug (Fig. C)  
Clip the water jug (3) onto the handle (4).  
Slide the water jug (3) down into the Steam mop body  
The Delta Head (Fig. G)  
This Steam Mop incorporates a built in delta head which  
enables you to access into tight corners and narrow gaps.  
Caution! Always wear suitable shoes when accessing the  
delta head on your steam mop. Do not wear slippers or open  
toed footwear.  
Attaching a cleaning pad (Fig. D)  
Replacement cleaning pads are available from your Black &  
Decker dealer:- (cat. no. FSMP20-XE).  
Return the handle (4) to the upright position and turn the  
steam mop ‘OFF’.  
Place the steam mop on the resting mat and wait until it  
loop’ side facing up.  
Lightly press the steam mop down onto the cleaning pad  
(6 or 7).  
Caution! Always place your steam mop on the resting mat (8)  
with the handle (4) in the upright position when stationary and  
make sure the steam mop is turned off when not in use.  
Place the front of your shoe onto the steam head removal  
tab (18) and press down gently.  
Lift the delta head (17) up off the steam head (5).  
Fit the delta head cleaning pad to the bottom of the delta  
head.  
Removing a cleaning pad (Fig. E)  
Caution! Always wear suitable shoes when changing the  
cleaning pad on your steam mop. Do not wear slippers or  
open toed footwear.  
7
(Original instructions)  
ENGLISH  
TM  
Note:  
Smartselect Technology (Fig. J)  
SmartselectTM button (2)  
head to the steam head.  
which shows various cleaning applications. They are used to  
select the correct operating mode for your particular cleaning  
operation.  
Using SmartselectTM , choose from one of the following applic-  
ations by pressing the smartselect button (2) until the required  
setting is selected:  
delta head clicks into place.  
Caution! Always place the steam mop on the resting mat (8)  
with the handle (4) in the upright position when stationary and  
make sure the steam mop is turned off when not in use.  
Wood/Laminate  
Stone/Marble  
Tiles/Vinyl  
Filling the water tank (Fig. H)  
The watertank on your steam mop is removable for convi-  
This Steam Mop incorporates an anti-calc system to help  
prolong the life of the system.  
Note: Fill the water tank with clean tap water.  
Note: In areas of very hard water, the use of de-ionised water  
is recommended.  
Remove the water tank (3).  
The steam mop will select the correct volume of steam  
required for your particular cleaning operation.  
(20).  
Note: Always check you are using the correct setting before  
using your steam mop. For convienience the steam mop will  
remember the last setting you chose.  
Fill the water tank (3) with water.  
Warning! Your water tank has a 0.5 litre capacity. Do not over  
Steam burst (Fig. I)  
The steam mop is equipped with a steam bust button to aid in  
the removal of stubborn marks and stains.  
During use, press the steam bust button (21) to apply  
extra cleaning power.  
Note: The stem burst will last for 10 seconds then the stem  
mop will return to the chosen setting.  
Note:  
Use  
Important! This unit will kill 99.9% of bacteria & germs when  
Switching on and off  
Hints for optimum use  
To switch the appliance on, press the ON/OFF button (1).  
It takes approximately 15 seconds for the steam mop to  
heat up.  
General  
Caution!  
Note:  
-
cleaning pad.  
ervoir will glow red. Once the steam mop is ready to use the  
water reservoir will glow blue.  
During use you can use the cable mamagement clip (11)  
to keep your cable out of the way of the work area..  
To switch the appliance off, press the ON/OFF button (1).  
Caution! Never leave the steam mop in one spot on any  
surface for any period of time. Always place the steam mop on  
the resting mat (8) with the handle (4) in the upright position  
when stationary and make sure the steam mop is turned off  
when not in use.  
mop.  
The easiest way to use the machine is to tilt the handle to  
a 45˚ angle and clean slowly, covering a small area at a  
time.  
Do not use chemical cleaners with your steam mop. To  
Caution! Always empty the steam mop after use.  
can use the steam burst button to apply extra steam to  
the area or pre-treat with a mild detergent and some water  
before using the steam mop.  
8
(Original instructions)  
ENGLISH  
Steam cleaning  
Press the SmartselectTM button (2) to the Wood/Laminate  
setting.  
loop’ side facing up.  
Pulling the handle (4) back will activate the steam pump.  
After a few seconds steam will start to come out of the  
steam head.  
Push and pull the steam mop slowly across the carpet to  
thoroughly refresh each section.  
Note: During use you may turn off the steam pump by return-  
ing the handle (4) to the upright position, this convenient  
feature will allow you to place the steam mop on the resting  
mat (8) so that you may move items of furniture with out the  
need to switch the appliance off.  
Raise the steam mop off the resting mat (8) and lightly  
press it down onto the cleaning pad (6 or 7).  
Place the steam mop on the resting mat.  
Connect the steam mop to the mains.  
Press the ON/OFF button (1). It takes approximately 15  
seconds for the steam mop to heat up.  
Press the SmartselectTM button (2) till the required setting  
is reached.  
Pulling the handle (4) back will activate the steam pump.  
After a few seconds steam will start to come out of the  
steam head.  
It takes a few seconds for steam to enter the cleaning pad.  
The steam mop will now glide easily over the surface to be  
sanitised/cleaned.  
handle (4) to the upright position and turn it ‘OFF’, place it  
on the resting mat (8) and wait until the steam mop cools  
Caution! It is important to monitor the water level in the water  
thoroughly steam clean each section.  
return the handle (4) to the upright position and turn the steam  
mop ‘OFF’. Unplug the unit from the electrical wall outlet,  
Note: During use you may turn off the steam pump by return-  
ing the handle to the upright position, this convenient feature  
will allow you to place the steam mop on the resting mat for  
a short time so that you may move items of furniture, then  
continue cleaning without the need to switch the appliance off.  
Caution! Never leave the steam mop in one spot on any  
surface for any period of time. Always place the steam mop on  
the resting mat (8) with the handle (4) in the upright position  
when stationary and make sure the steam mop is turned off  
when not in use.  
handle (4) to the upright position and turn it ‘OFF’, place it  
on the resting mat (8) and wait until the steam mop cools  
After use (Fig. J & K)  
Caution! It is important to monitor the water level in the water  
Return the handle (4) to the upright position and turn the  
steam mop ‘OFF’,  
return the handle (4) to the upright position and turn the steam  
mop ‘OFF’. Unplug the unit from the electrical wall outlet,  
Place the steam mop on the resting mat (8) and wait until  
Unplug the steam mop from the electrical wall outlet.  
Empty the water tank (3).  
Remove the cleaning pad (6 or 7) and wash it ready for  
next use. (Take care to follow the wash care instructions  
printed on the cleaning pad).  
Caution! Never leave the steam mop in one spot on any  
surface for any period of time. Always place the steam mop on  
the resting mat (8) with the handle (4) in the upright position  
when stationary and make sure the steam mop is turned off  
when not in use.  
Wrap the supply cable around the cable tidy hooks (10 &  
11).  
Carpet refreshing  
Note: The top cable tidy hook (11) rotates to easily release the  
cable ready for next use.  
loop’ side facing up.  
Clip the supply cable onto itself using the cable tidy clip  
(22) close to the plug.  
Raise the steam mop off the resting mat (8) and lightly  
press it down onto the cleaning pad (6 or 7).  
Place steam mop on the resting mat (8) for storage.  
Note: With the handle (4) in the upright position, the cable  
neatly wrapped around the cable tidy hooks (10 & 11) and  
secured with the cable tidy clip (22) your steam mop will stand  
on its own for storage. Alternatively there is a hanging bracket  
(23) built into the hand grip (24) which will allow your steam  
mop to be hung from a suitable hook on the wall. Always  
ensure that your wall hook is capable of supporting the weight  
of the steam mop safely.  
Lightly press the steam mop down onto the carpet glider  
(9) until it clicks into place.  
Place the steam mop on the resting mat. (8)  
Connect the steam mop to the mains.  
Press the ON/OFF button (1). It takes approximately 15  
seconds for the steam mop to heat up.  
9
(Original instructions)  
ENGLISH  
Technical data  
Maintenance and cleaning  
Your Black & Decker corded appliance has been designed to  
operate over a long period of time with a minimum of main-  
tenance. Continuous satisfactory operation depends upon  
proper appliance care and regular cleaning.  
Warning! Before performing any maintenance or cleaning on  
corded appliances switch off and unplug the appliance.  
Wipe your appliance over using a soft damp cloth.  
For stubborn marks you can use a mild solution of soap  
and water to dampen your cloth.  
FSM1630-XE  
(Type 1)  
Voltage  
Vac  
W
230  
1600  
500  
2.7  
Power  
Tank capacity  
ml  
Weight  
kg  
Care of the cleaning pads  
Wash care instructions - No fabric conditioner - Allow to dry  
fully before re-use.  
Caution! Follow the cleaning instructions printed on the label  
of the cleaning pad.  
Protecting the environment  
Separate collection. This product must not be  
Z
disposed of with normal household waste.  
needs replacement, or if it is of no further use to you, do not  
dispose of it with household waste. Make this product avail-  
able for separate collection.  
Separate collection of used products and packaging  
z
allows materials to be recycled and used again.  
Re-use of recycled materials helps prevent environ-  
mental pollution and reduces the demand for raw  
materials.  
Local regulations may provide for separate collection of elec-  
trical products from the household, at municipal waste sites or  
by the retailer when you purchase a new product.  
Black & Decker provides a facility for the collection and  
recycling of Black & Decker products once they have reached  
the end of their working life. To take advantage of this service  
please return your product to any authorised repair agent who  
will collect them on our behalf.  
You can check the location of your nearest authorised repair  
the address indicated in this manual. Alternatively, a list of  
authorised Black & Decker repair agents and full details of our  
after-sales service and contacts are available on the Internet  
10  
Australia & New Zealand  
Stanley Black & Decker  
82 Taryn Drive, Epping, VIC 3076 Australia  
Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ)  
90591389  
10/12  

Worth Data C488 User Manual
Soleus Air Air Conditioner Ph3 12r 03 User Manual
Ricoh Ld245 User Manual
Radio Shack 08a01 User Manual
Philips Sc469sbc User Manual
Panasonic Uf 8100 User Manual
MGE PULSAR EXTREME 3000 VA User Manual
LG LRBP1031W User Manual
GARMIN APPROACH S40 User Manual
BLACK DECKER CD501 User Manual