VG34V Series
LCD Monitor
User Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
The device may fall, causing serious personal injury or death. To prevent
injury, this device must be securely attached to the floor/wall in accordance
with the installation instructions.
iii
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
•
•
•
The socket-outlet shall be installed near the equipment and shall be
easily accessible
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
Provide an earthing connection before the mains plug is connected to
the mains. And, when disconnecting the earthing connection, be sure
to disconnect after pulling out the mains plug from the mains.
•
Please confirm the distribution system in building installation shall
provide the circuit breaker rated 120/240V, 20A (maximum).
iv
•
If provided with a 3-pin attachment plug on the power cord, plug the
cord into a grounded (earthed) 3-pin outlet. Do not disable the power
cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
Stability Hazard
•
•
•
The product may fall, causing serious personal injury or death. To
prevent injury, this product must be securely attached to the floor/wall
in accordance with the installation instructions.
A product may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as:
ALWAYS use cabinets or stands or installation methods recommended
by the manufacturer of the product set.
•
•
ALWAYS use furniture that can safely support the product.
ALWAYS ensure the product is not overhanging the edge of the
supporting furniture.
•
•
ALWAYS educate children about the dangers of climbing on furniture
to reach the product or its controls.
ALWAYS route cords and cables connected to your product so they
cannot be tripped over, pulled or grabbed.
•
•
NEVER place a product in an unstable location.
NEVER place the product on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the product to a
suitable support.
•
•
NEVER place the product on cloth or other materials that may be
located between the product and supporting furniture.
NEVER place items that might tempt children to climb, such as toys
and remote controls, on the top of the product or furniture on which the
product is placed.
•
If the existing product is going to be retained and relocated, the same
considerations as above should be applied.
WARNING
Usage of other than specified head- or earphones can result in hearing
loss due to excessive sound pressures.
v
Prevent Tipping
When using the display, fasten the LCD to a wall using a cord or chain that can
support the weight of the monitor in order to prevent the monitor from falling.
1
M4 or M6 Screw
Cord
2
Cord or chain
•
•
Display design may differ from those illustrated.
Installing must be done by a qualified technician , and please
contact your supplier for more information.
•
•
For the Models with net weight >=7kg. Please select the suitable
way to Prevent Tipping.
For the models with VESA Mount, please use method , install
the screws with ring to the VESA Mount hole, then tie the cord
or chain to the wall. Otherwise, please use method to tie the
cord or chain to the stand and then fix it to the wall.
vi
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
vii
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
viii
1.1
Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2
Package contents
Check your package for the following items:
LCD Monitor
Base
Quick Start Guide
Warranty Card
1x USB cable (optional)
1x Power Cord
1x HDMI Cable (optional)
1x DP Cable (optional)
1x Screwdriver
•
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor VG34 Series
1-1
1.3
Assembling the monitor
To assemble the monitor:
1. Align the screw hole on the arm with the bundled screw on the base.
Then insert the base into the arm.
2. Fix the base to the arm by fastening the bundled screw.
2
1
3
*Base screw size: M6 x 17mm
1-2
Chapter 1: Product Introduction
1.4
Connect cables
1.4.1
Rear of the LCD monitor
9
2 3
5
1
4
7
8
6
1. HDMI2 Port
2. HDMI1 Port
3. DP2 Port
4. DP1 Port
5. Earphone
6. USB
7. USB
8. TYPE B Port
9. DC-IN Port
ASUS LCD Monitor VG34 Series
1-3
1.5
Monitor introduction
1.5.1
Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
6
5
4
3
2
6
5
4
3
2
1
1. Power Indicator:
•
The color definition of the power indicator is as the below table.
Status
White
Amber
OFF
Description
ON
Standby mode
OFF
2.
3.
Power Button:
•
Press this button to turn the monitor on/off.
GameVisual Button:
This is shortcut 2
.
•
Press this Shortcut to switch from seven video preset modes
(Scenery Mode, Racing Mode, Cinema Mode, RTS/RPG Mode, FPS
Mode, sRGB Mode and MOBA Mode) with GameVisual™ Video
Intelligence Technology.
4.
GamePlus Button:
This is shortcut 1
•
GamePlus: The GamePlus Function provides a toolkit and creates a
better gaming environment for users when playing different types of
games. Particularly, Crosshair function is specially designed for new
gamers or beginners interested in First Person Shooter (FPS) games.
1-4
Chapter 1: Product Introduction
To active GamePlus:
•
•
Press GamePlus Button to enter the GamePlus main menu.
Activate Crosshair, Timer, FPS Counter or Display Alignment
function.
•
•
Move the
confirm the function needed. Press
Crosshair/Timer/FPS Counter is movable by pressing
(
) button up/down to select and press
(
) to
to go off, and exit.
5-way key.
GamePlus main menu GamePlus-Crosshair GamePlus-Timer
5.
6.
Close Button:
•
Exit the OSD menu.
(5-way) Button:
•
•
Turns on the OSD menu. Enacts the selected OSD menu item.
Increases/Decreases values or moves your selection up/down/left/right
ASUS LCD Monitor VG34 Series
1-5
2.1
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
•
Hold the stand to prevent the monitor from falling when you change its
angle.
You can adjust the monitor’s angle from +23˚ to -5˚ and it allows 15˚
swivel adjustment from either left or right.
-5 ~ 15
130mm
+10°
-10°
ASUS LCD Monitor VG34 Series
2-1
2.2
Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the monitor
facedown on its EPS packaging.
2. Remove the four (4) screws securing the arm to the rear of the
monitor.
3. Detach the stand (arm and base) from the monitor.
•
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg
(Screw size: M4 x 10 mm).
2-2
Chapter 2: Setup
2.3
Outline dimension
Unit: mm
ASUS LCD Monitor VG34 Series
2-3
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
ASUS TUF Gaming VG34VQL1B HDR Off
Racing Mode DisplayPort-1 3440x1440@165Hz
Gaming
Variable OD
FreeSync Premium
ELMB
GamePlus
GameVisual
Shadow Boost
1. Press Central of 5-way to activate the OSD menu.
2. Press the and buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3. To select the highlighted item on the menu press the Center key.
4. Press the and buttons to select the desired parameter.
5. Press the Center key to enter the slide bar and then use the or
buttons, according to the indicators on the menu, to make your
changes.
6. Press the ◄/► to move left / right menu.
ASUS LCD Monitor VG34 Series
3-1
3.1.2
1. Gaming
This function contains six sub-functions that you can select for your
OSD Function Introduction
preference.
ASUS TUF Gaming VG34VQL1B HDR Off
Racing Mode DisplayPort-1 3440x1440@165Hz
Gaming
Variable OD
FreeSync Premium
ELMB
GamePlus
GameVisual
Shadow Boost
•
•
Variable OD: The adjusting range is from 0 to 100.
FreeSync Premium: It can allow a FreeSync supported graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
•
•
•
•
ELMB: Check to decrease motion blur and minimize ghosting part when
on-screen objects are fast moving.
GamePlus: Activate Crosshair, Timer or FPS Counter or Display
Alignment function.
GameVisual: This function contains seven sub-functions that you can
select for your preference.
Shadow Boost:Dark color enhancement adjust monitor gamma curve to
enrich the dark tones in an image making dark scenes and objects much
easier be found.
•
•
•
In the Racing Mode, the Saturation, and ASCR functions are not user-
configurable.
In the sRGB Mode, the Saturation, Skin Tone, Color Temp., Brightness,
Contrast and ASCR functions are not user-configurable.
In the MOBA Mode, the Saturation and ASCR functions are not user-
configurable.
2. Image
3-2
Chapter 3: General Instruction
You can adjust Brightness, Contrast, VividPixel , ASCR, Aspect
Control and Blue Light Filter from this main function.
ASUS TUF Gaming VG34VQL1B HDR Off
Image
Racing Mode DisplayPort-1 3440x1440@165Hz
Brightness
Contrast
HDR
VividPixel
ASCR
Aspect Control
Blue Light Filter
•
•
•
Brightness: The adjusting range is from 0 to 100.
Contrast: The adjusting range is from 0 to 100.
HDR: High Dynamic Range. Contains two HDR modes (ASUS Cinema
HDR and ASUS Gaming HDR ).
•
VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
•
•
•
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function,ASCR is Disabled when ECO mode or ELMB is on.
Aspect Control: Adjusts the aspect ratio to “Full” 、 4:3、16:9 (24”W)
、16:9 (27”W).
Blue Light Filter: Adjust the energy level of blue light emitted from LED
backlight.
ASUS LCD Monitor VG34 Series
3-3
•
When Blue Light Filter is activated,the default settings of Standard Mode will
be automatically imported.
•
•
Between Level 1 to Level 3, the Brightness function is user-configurable.
Level 4 is optimized setting. It is compliance with TUV Low Blue Light
Certification. The Brightness function is not user-configurable.
•
4:3 is only available when input source is in 4:3 format。
Please refer to the following to alleviate eye strains:
•
Users should take some time away from the display if working for long hours.
It is advised to take short breaks (at least 5 mins) after around 1 hour of
continuous working at the computer. Taking short and frequent breaks is more
effective than a single longer break.
•
•
To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
Eye exercises can help to reduces eye strain. Repeat these exercises often. If
eye strain continues please consult a physician. Eye exercises: (1) Repeating
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
•
High energy blue light may lead to eye strain and AMD (Age-Related Macular
Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to
avoiding CVS (Computer Vision Syndrome).
3. Color
Select the image color you like from this function.
ASUS TUF Gaming VG34VQL1B HDR Off
Racing Mode DisplayPort-1 3440x1440@165Hz
Color
Color Temp.
Saturation
Skin Tone
•
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode.
•
•
Saturation: The adjusting range is from 0 to 100.
Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
•
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
3-4
Chapter 3: General Instruction
4. Input Select
Select the input source from HDMI-1, HDMI-2, DisplayPort-1 or
DisplayPort-2 input signal.
ASUS TUF Gaming VG34VQL1B HDR Off
Racing Mode DisplayPort-1 3440x1440@165Hz
Input Select
HDMI-1
HDMI-2
DisplayPort-1
DisplayPort-2
5. PIP/PBP Setting
The PIP/PBP Setting allows you to open up sub-window(s) connected
from any video source.
ASUS TUF Gaming VG34VQL1B HDR Off
PIP/PBP Setup
Racing Mode DisplayPort-1 3440x1440@165Hz
PIP/PBP Mode
PIP/PBP Source
Color Setting
PIP Size
By activating this function, this monitor displays two pictures, three
pictures or four pictures for any video source.
•
•
PIP/PBP Mode: Select PIP, PBP or turn it off.
PIP/PBP Source: Selects the video input source among, “HDMI-1”,
“HDMI-2”, “DisplayPort-1” or “DisplayPort-2”.
•
•
Color setting: Set GameVisual mode for each PIP/PBP window.
PIP Size: Adjust the PIP size to “Small”, “Middle”, or “Large”.
ASUS LCD Monitor VG34 Series
3-5
5. MyFavorite
You can adjust Shortcut and Customized Setting from this main
function.
ASUS TUF Gaming VG34VQL1B HDR Off
Racing Mode DisplayPort-1 3440x1440@165Hz
MyFavorite
Shortcut
Custormized Setting
•
•
Shortcut : User can select from “GamePlus”, “GameVisual”,
“Brightness”, “Contrast”, PIP/PBP Setup, “Blue Light Filter”, “Color
Temp.”, “Volume” and set as shortcut key.
Customized Setting : You can do your setting according to your favorite.
6. System Setup
Adjusts the system configuration.
ASUS TUF Gaming VG34VQL1B HDR Off
Racing Mode DisplayPort-1 3440x1440@165Hz
System Setup
Language
Sound
ECO Mode
USB Hub
Power Indicator
Power Key Lock
Key Lock
OSD Setup
ASUS TUF Gaming VG34VQL1B HDR Off
Racing Mode DisplayPort-1 3440x1440@165Hz
System Setup
Information
All Reset
3-6
Chapter 3: General Instruction
•
Language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croatia,
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional
Chinese, Japanese, Korean, Persian, Thai and Indonesian.
•
•
•
•
•
•
Sound：Adjusts the output volume level or mute the audio.
ECO Mode: Activate the ecology mode for power saving.
USB Hub: Turn On/Off USB Hub function during the standby mode.
Power Indicator: Turn the power LED indicator on/off.
Power Key Lock: To disable / enable power key.
Key Lock: Disable all key functions. Pressing the down button for more
than five seconds to disable key lock function.
•
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the
OSD screen.
•
•
Information: Displays the monitor information.
All Reset: Selects “Yes” to revert all settings to the factory default mode.
ASUS LCD Monitor VG34 Series
3-7
3.2
Model
Specifications
VG34VQL1B
34”W (86.43cm)
Panel Size
Max. Resolution
3440X1440@165Hz
550cd/m2 (Typ.) 550cd/m2(Peak)
4000:1
Brightness
Intrinsic Contrast Ratio (Typ.)
Viewing Angle (CR=10)
Display Colors
178°(V) /178°(H)
16.7M colors (8bit)
84%NTSC/DCI-P3 90%
4ms (Gray to Gray), MPRT 1ms
2W x 2 stereo
Color Saturation
Response Time
Satellite Speaker
Earphone Output
Yes
HDMI input
HDMIx2
DisplayPortx2
110W
DisplayPort input
Power ON Consumption(Max.)
Chassis Colors
Power saving mode
Power off mode
Tilt
Black
< 0.5W
< 0.5W
-5° ~ +15°
+10°~-10°
809 x 546 x 274 mm
Swivel
Phys. Dimension (WxHxD)
Phys. Dimension without stand
(WxHxD) (For VESA Wall Mount)
809 x 366 x 105 mm
Box Dimension (WxHxD)
Net Weight (Esti.)
980 x 226 x 516 mm
9.01 kg
Gross Weight (Esti.)
Voltage Rating
11.74 kg
AC 100~240V(Built-in)
0~40°
Operational temperature
3-8
Chapter 3: General Instruction
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
•
Press the
ON mode.
Check if the power cord is properly connected to
the monitor and the power outlet.
Check Power Indicator function in main menu OSD.
Select “ON” to turn on power LED.
The power LED lights amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
No sound or sound is low
•
•
Adjust the volume settings of both your monitor and
computer.
Make sure the computer sound card driver is
properly installed and activated.
ASUS LCD Monitor VG34 Series
3-9
3.4
Supported Timing List
PC Timings List of HDMI / DP input
Resolution
640x480-60Hz
HDMI
V
DP
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
640x480-67Hz
V
640x480-72Hz
V
640x480-75Hz
V
720x400-70Hz
V
800x600-56Hz
V
800x600-60Hz
V
800x600-72Hz
V
800x600-75Hz
V
1024x768-60Hz
1024x768-70Hz
1024x768-75Hz
1152x864-75Hz
1280x720-60Hz(RB)
1280x720-60Hz
1280x960-60Hz
1280x1024-60Hz
1280x1024-75Hz
1440x900-60Hz(CVT RB)
1440x900-60Hz
V
V
V
V
V
V
V
V
V
V
V
1680x1050-60Hz(CVT RB)
1680x1050-60Hz
V
V
1920x1080-60Hz
V
2560x1440-144Hz
3440x1440-60Hz(CVT RB)
3440x1440-100Hz(CVT RB)
3440x1440-120Hz(DP)
V
V
V
3440x1440-144Hz(DP)
3440x1440-165Hz(DP)
640x480P-60Hz
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
720x480P-60Hz
1280x720P-50Hz
1280x720P-60Hz
1440x480P-60Hz
1440x576P-50Hz
1920x1080i-50Hz
1920x1080P-50Hz
3-10
Chapter 3: General Instruction
1920x1080i-60Hz
1920x1080P-60Hz
3840 x 2160P-50Hz
3840 x 2160P-60Hz
V
V
V
V
V
V
V
V
PBP Mode
1280x1440-60Hz(2560*1440)
1720x1440-60Hz (3440*1440)
1920x1600-60Hz (3840*1600)
1920x2160-60Hz (3840*2160)
V
V
ASUS LCD Monitor VG34 Series
3-11
|