Xerox WorkCentre
PDL Reference Guide for the
WorkCentre M128/M123
October 20, 2004
dc05cc0364
Accessing Extended
Features
Overview
This document enables you to access the extended features of the WorkCentre
M128/M123 in environments where Xerox does not provide a custom driver.
NOTE: Some of the commands and syntax used in this documents requires
familiarity with either PostScript (PS) or Printer Command Language (PCL).
This document provides the Printer Description Language (PDL) commands
and syntax for each feature. The following items are also included:
•
A PostScript tables that describes the PostScript features the WorkCentre
supports and the syntax to use the feature.
•
A PCL table that describes the PCL features the WorkCentre supports and
the syntax to use the feature.
This document is not intended to be a complete PS or PCL reference manual: it
is a guide for using the PS and PCL commands with WorkCentre. Refer to
these additional reference materials: PostScript Language Reference Manual,
Third Edition, ISBN 0-201-38922-8, PCL5 Printer Language Technical
Reference Manual Hewlett-Packard manual and Printer Job Language
Technical Reference Manual, Hewlett-Packard manual.
Using this Guide
1. Search the Feature Table to determine whether the feature you wish to use
is supported.
2. Verify that the feature is supported by the platform. For example, the
WorkCentre must have the Finisher option installed to use stapling
commands.
3. Following across the table to find the syntax listed for the PDL examples
shown. Read the Dependencies/Caveats section.
WorkCentre M128/M123 Reference Guide
Page 1
dc05cc0364
Feature
Description
Separation Color
Names
Specify the process colorant name.
Separation
Order
Specify the order of process colorant name.
Use CIE Color
Specify to apply CIE-based color space through color conversion
PostScript Implementation
This section describes the PostScript commands required to access specific
WorkCentre features. The following table lists each feature and the PostScript
syntax required to use the feature. After the table are examples of how to use
these commands and what the PostScript file looks like.
For more information about PostScript commands, refer to the PostScript
Language Reference Manual, Third Edition, ISBN 0-201-37992-8.
PostScript Print Features/Implementation
* = default value
Feature
Implementation
<</PageSize [width height]>>
setpagedevice
Values
[width x height] in 1/72 inch (points)
[842 1191] = A3
Media Size
[595 842]
[420 595]
= A4
= A5 †
[729 1032] = B4
[516 729]
[396 612]
[612 792]
[612 936]
= B5
= Statement (5.5 x 8.5) †
= Letter (8.5 x 11)
= Legal 13 (8.5 x 13)
[612 1008] = Legal (8.5 x 14)
[792 1224] = 11 x 17
[522 756]
= Executive (7.25 x 10.5) †
[765 1106] = 8Kai †
[757 1100] = 8Kai †
[553 765]
[550 757]
= 16Kai †
= 16Kai †
†: Each paper size is available based on
non-volatile memory setting.
The following paper sizes are only available
with SMH.
[297 420]
[363 516]
[576 720]
[609 892]
= A6
= B6
= 8 x 10
= 8.46 x 12.4
[792 1080] = 11 x 15
[632 842]
[648 792]
[283 420]
[420 567]
[279 540]
[297 684]
[312 624]
[288 432]
[649 918]
= A4 Cover
= Letter Cover (9 x 11)
= Hagaki (Japanese PostCard)
= Double Hagaki
= Monarch
= Com-10
= DL
= Postcard
= C4
WorkCentre M128/M123 Reference Guide
Page 3
dc05cc0364
Feature
Implementation
Values
= C5
= Tyoukei You 3
[459 649]
[340 666]
Media
<</LeadingEdge int >>
Where int is one of the following:
Direction
setpagedevice
0 = Short Edge; top of page in portrait
orientation.
1 = Long Edge; left side of page in portrait
orientation.
2 = Short Edge; bottom of page in portrait
orientation.
3 = Long Edge; right side of page in
portrait orientation.
null* = Auto
Media Source
<</MediaPosition int>>
Where int is one of the following:
0 = Tray1
1 = Tray2
2 = Tray3
3 = Tray4
null* = Auto
setpagedevice
Media Source
from SMH
<</ManualFeed value>>
Where value is one of the following:
setpagedevice
true = Feed paper from SMH
false* = Feed paper from a tray other than
SMH
Media Color
<</MediaColor (string) >>
Where string is any value.
setpagedevice
Media Weight
<</MediaWeight real >>
setpagedevice
Where real is in g/㎡(gram per
square-meter) or null
Media Class
<</MediaClass (string)>>
setpagedevice
Where string is one of the following:
Stationary = normal paper
recycled = recycled paper
transparency = OHP sheet
thick1 = thick paper 1
thick2 = thick paper 2
user1 = user defined paper 1
user2 = user defined paper 2
user3 = user defined paper 3
user4 = user defined paper 4
user5 = user defined paper 5
thin
= thin paper
label = label paper
used = backing paper
Where string is any value.
Media Type
<</MediaType (string)>>
setpagedevice
Page 4
WorkCentre M128/M123 Reference Guide
dc05cc0364
Feature
Media
Implementation
Values
<</DeferredMediaSelection
Where value is one of the following:
Selection
value>>
true* = Deferred media selection by
output device (more powerful and flexible
media selection)
setpagedevice
false = Immediate media selection by
strict setpagedevice operator
Resolution
Duplex
<</HWResolution [x y]>>
Where x and y are one of the following:
setpagedevice
600 600*(dpi)
1200 1200
<</Duplex value>>
Where value is one of the following:
setpagedevice
true = Duplex
false* = Simplex
This feature is effective only in
conjunction with Duplex = true.
Where value is one of the following:
true = Tumble (Short edge binding
Duplex)
Tumble
<</Tumble value>>
setpagedevice
false* = Duplex (Long edge binding
Duplex)
Image
<</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /REValue int >>
Where int is one of the following:
0 = No image enhancement
Enhancement
1* = Activate image enhancement
>>
setpagedevice
Toner Save
<</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /TonerSaver int >>
>>
Where int is one of the following:
0* = No toner saving
1 = Lighten output density, toner saving
setpagedevice
Halftone
Screen
<</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /EngineScreen int >>
>>
Where int is one of the following:
0* = Low frequency screen
1 = High frequency screen
2 = Compatible screen with FX standard
PDL’s
Selection
setpagedevice
Output
<</OutputType (string)>>
setpagedevice
Where string is one of the following:
Location
CENTER TRAY: facedown tray #1 (w/o
finisher)
CENTER TRAY2: facedown tray #2 (w/
finisher)
SIDE TRAY: faceup tray
FINISHER TRAY1: finisher tray
Null = Not specified
WorkCentre M128/M123 Reference Guide
Page 5
dc05cc0364
Feature
Quantity
Implementation
<</NumCopies value >>
setpagedevice
Values
Where value is one of the following:
integer from 1 to 9999: number of copies
null: Not specified
Collation
Jog
<</Collate value >>
Where value is one of the following:
setpagedevice
true = collated
false* = uncollated
<</Jog int >>setpagedevice
Where int is one of the following:
0 = Do not offset
3 = Offset at the beginning of each page
[set]
Stapling
<</Staple int1
/StapleDetails << /Type 7
/Location int2 >>
>>
Where int1 is one of the following:
0* = Do not staple
3 = Staple at the end of each set
Where int2 is one of the following:
0* = top-left-single
1 = bottom-left-single
2 = top-right-single
3 = bottom-right-single
4 = top-double
setpagedevice
5 = bottom-double
6 = left-double
7 = right-double
Interleaving
Paper
<</SlipSheet int1
/SlipSheetDetails << /Type 1
/AutoTraySelect int2
/SheetTray int3
Where int1 is one of the following:
0 = Do not deliver interleaving paper.
4 = Deliver interleaving paper at the end
of each page
Where int2 is one of the following:
/MediaClass (string) >>
>>
0 = SheetTray is referred and feed
interleaving paper from the SheetTray
1* = Feed interleaving paper from a tray
following system setting. SheetTray is
not referred.
setpagedevice
Where int3 is one of the following:
0* = Feed interleaving paper from Tray1
1 = Tray2
2 = Tray3
3 = Tray4
100 = SMH
Where string is same as the “Media
Class” feature. It means media class for
the interleaving paper.
Page 6
WorkCentre M128/M123 Reference Guide
dc05cc0364
Feature
Implementation
<</ProcessColorModel name >>
setpagedevice
Values
Process Color
Model
Where name is one of the following:
/DeviceGray
/DeviceRGB (with Separations true)
/DeviceCMYK (with Separations true)
/DeviceCMY (with Separations true)
/DeviceRGBK (with Separations true)
Separations
<</Separations value >>
Where value is one of the following:
true = Multiple color separations will be
generated for each page of output.
false* = All colorants will be combined into a
single composite page on a single
sheet of physical medium.
setpagedevice
Separation
<</SeparationColorNames
Where value is an array.
Color Names
value>>
Legal element values are the process
colorant names implied by the process
color model.
setpagedevice
Valid colorant names for each process
color model are like the following in case
of separation
DeviceCMYK = Cyan, Magenta, Yellow,
Black
DeviceCMY = Cyan, Magenta, Yellow
DeviceRGB = Red, Green, Blue
DeviceRGBK = Red, Green, Blue, Gray
DeviceGray = Gray
Where value is an array.
Separation
Order
<</SeparationOrder value>>
Legal element values are the process
colorant names implied by the process color
model.
setpagedevice
Use CIE Color
<</UseCIEColor value>>
Where value is one of the following:
setpagedevice
true = Re-map each color from device
color space to device
independent’s CIE- based color
space
false* = Do not re-map color
These features use PJL commands as described in “PCL/PJL Implementation.”
Refer to that section for information about these features.
Job Name
Job Type
Accounting
Delay Print
WorkCentre M128/M123 Reference Guide
Page 7
dc05cc0364
Sample PostScript Headers
Example 1 Header for Simple Print
%!PS
Example 2 Header for Finishing
(Letter paper, duplex, 10 copies with collation, stapling with left-upper single
and stacker tray for output bin)
%!PS
<</PageSize [612 792]>>setpagedevice
<</Duplex true /Tumble false>>setpagedevice
<</OutputType (FINISHER TRAY1)>>setpagedevice
<</Collate true>>setpagedevice
<</NumCopies 10>>setpagedevice
<</Staple 3 /StapleDetails << /Type 7 /Location 0 >>
>>setpagedevice
PostScript Feature Dependencies/Caveats
•
•
All DSC comments are ignored and not interpreted.
The WorkCentre supports PostScript resolutions up to and including 1200 x
1200. Some PostScript jobs may not print if you use this resolution. If
printing stops, reprint the same job at a lower resolution.
•
•
Valid media sizes for duplexing are between [253 x 360] and [841 x 1224]
(point) except Hagaki, Double Hagaki, Postcard, Tyou-Youkei 3, Com10,
Monarch, DL, C4, and C5.
Valid media sizes for stapling include A3, A4, B4, B5, 8.5x11, 8.5x13,
8.5x14, 11x17, 8-Kai, 16-Kai, and 7.25 x 10.5.
•
•
Do not duplex transparency and recycled paper jobs.
Do not staple any job with all paper class except stationary, recycled and
used (backing) paper.
Page 8
WorkCentre M128/M123 Reference Guide
dc05cc0364
PostScript Fonts
The following PostScript fonts are resident with Adobe interpreter.
Albertus
Goudy Oldstyle Italic
Albertus Italic
Goudy Bold
Albertus Light
Goudy Bold Italic
Antique Olive Roman
Antique Olive Italic
Antique Olive Bold
Antique Olive Compact
Apple Chancery
Goudy Extra Bold
Helvetica
Helvetica Oblique
Helvetica Bold
Helvetica Bold Oblique
Helvetica Narrow
Arial
Arial Italic
Arial Bold
Arial Bold Italic
ITC Avant Garde Gothic Book
ITC Avant Garde Gothic Book Oblique
ITC Avant Garde Gothic Demi
ITC Avant Garde Gothic Demi Oblique
Bodoni Roman
Helvetica Narrow Oblique
Helvetica Narrow Bold
Helvetica Narrow Bold Oblique
Helvetica Condensed
Helvetica Condensed Oblique
Helvetica Condensed Bold
Helvetica Condensed Bold Oblique
Hoefler Text
Bodoni Italic
Hoefler Text Italic
Bodoni Bold
Hoefler Text Black
Bodoni Bold Italic
Bodoni Poster
Hoefler Text Black Italic
Hoefler Ornaments
Joanna
Joanna Italic
Joanna Bold
Joanna Bold Italic
Letter Gothic
Letter Gothic Slanted
Letter Gothic Bold
Bodoni Poster Compressed
ITC Bookman Light
ITC Bookman Light Italic
ITC Bookman Demi
ITC Bookman Demi Italic
Carta
Chicago
Clarendon Roman
Clarendon Bold
Clarendon Light
Letter Gothic Bold Slanted
ITC Lubalin Graph Book
ITC Lubalin Graph Book Oblique
ITC Lubalin Graph Demi
ITC Lubalin Graph Demi Oblique
Marigold
Cooper Black
Cooper Black Italic
Copperplate Gothic 32BC
Copperplate Gothic 33BC
Coronet
Courier
Courier Oblique
Monaco
ITC Mona Lisa Recut
New Century Schoolbook Roman
New Century Schoolbook Italic
New Century Schoolbook Bold
New Century Schoolbook Bold Italic
NewYork
OCR-B Letterpress M
Optima Roman
Optima Italic
Courier Bold
Courier Bold Oblique
Eurostile Medium
Eurostile Bold
Eurostile Extended No. 2
Eurostile Bold Extended No. 2
Geneva
Optima Bold
Gill Sans
Optima Bold Italic
Gill Sans Italic
Oxford
Gill Sans Bold
Palatino Roman
Gill Sans Bold Italic
Gill Sans Light
Palatino Italic
Palatino Bold
Gill Sans Light Italic
Gill Sans Extra Bold
Gill Sans Condensed
Gill Sans Condensed Bold
Goudy Oldstyle
Palatino Bold Italic
Stempel Garamond Roman
Stempel Garamond Italic
Stempel Garamond Bold
Stempel Garamond Bold Italic
WorkCentre M128/M123 Reference Guide
Page 9
dc05cc0364
Symbol
Univers 65 Bold
Tekton Regular
Times Roman
Univers 65 Bold Oblique
Univers 57 Condensed
Times Italic
Times Bold
Univers 57 Condensed Oblique
Univers 67 Condensed Bold
Univers 67 Condensed Bold Oblique
Univers 53 Extended
Univers 53 Extended Oblique
Univers 63 Extended Bold
Univers 63 Extended Bold Oblique
Wingdings
Times Bold Italic
Times New Roman
Times New Roman Italic
Times New Roman Bold
Times New Roman Bold Italic
Univers 45 Light
Univers 45 Light Oblique
Univers 55
ITC Zapf Chancery Medium Italic
ITC Zapf Dingbat
Univers 55 Oblique
Page 10
WorkCentre M128/M123 Reference Guide
dc05cc0364
PCL
This WorkCentre supports PCL5e and PCL XL color emulations that enable the
features listed in the following table.
Feature
Job Name
Description
Job identifier
Custom Paper Size
– available only for
PCL
Customer designated paper size
Media Size
Media Source
Output Location
Stapling
Dimensions of paper
Feed tray
Output bin
Indicate a staple position
Collation
Multiple pages in sequential sets (page 1, 2, 3, 4, etc.) or
multiple pages in sets of the same page (4 copies of page
1, 4 copies of page 2, etc.)
Resolution
Quantity
Simplex
Horizontal and vertical resolution
Number of copies (maximum 999)
Deliver one-sided output
Duplex
Deliver two-sided output
Orientation
Landscape or portrait
Force Short Edge
Feeding
Short edge feed or long edge feed
Specify mode as Job Mode: Normal Job, Secure Job, Delayed Job,
Sample Job, Fax Job
Job Mode
Job Type
Specify Confidential Print or Proof Print
Insert blank sheet between OHP sheets
Enter user-account string to track printer usage
Specify the time to print a job
Interleaving Paper
Accounting
Delay Print
WorkCentre M128/M123 Reference Guide
Page 11
dc05cc0364
PCL/PJL Implementation
This section includes the PCL commands for specific features. The following
table lists each feature and the PCL syntax required to use the feature.
Following the table are examples of how to use these commands and the PCL
file.
Refer to these reference materials: PCL5 Printer Language Technical
Reference Manual and Printer Job Language Technical Reference Manual,
Hewlett-Packard Manual.
Feature
Implementation
Values
Job Name
＠PJL SET JOBNAME =
Where jobname-string is a maximum of
32 characters
“jobname-string”
Exclude 「”」(22H) character
Custom Paper
Size –
Not in PJL command.
Width of Custom Paper is specified by
<ESC>*c#X where # = decipoints for
(100 - 305) mm.
Use PCL to specify:
<ESC>&l101A
available only
for PCL
Length of Custom Paper is specified by
<ESC>*c#Y where # = decipoints for
(140 - 482) mm.
For instance:
4.25-inch x 5.5-inch produces
<ESC>*c3060X3960Y
4.25-inch x 720 decipoints/inch = 3060
and
5.5-inch x 720 decipoints/inch = 3960.
Media Size
@PJL SET PAPER = value
Where value is one of the following:
B4
B5
LETTER = 8.5x11
LEGAL = 8.5x14
A4
JISEXEC
LEDGER = 11x17
A3
CUSTOM = Custom paper
A5
ROC8 = 8Kai
KROK16K = 16Kai
Page 12
dc05cc0364
WorkCentre M128/M123 Reference Guide
Feature
Implementation
<ESC>&lint A
Values
Media Size
(continued)
Where int is one of the following:
2 = Letter (8.5 x 11)
3 = Legal (8.5 x 14)
6 = Ledger (11x17)
12 = B5 (JIS)
13 = A5
26 = A4
27 = A3
46 = B4 (JIS)
74 = 8Kai
131 = 16Kai
Media Source
@PJL SET MEDIASOURCE
Where value is one of the following:
= value
TRAY1 = Feed from paper tray1
TRAY2 = Tray2
TRAY3 = Tray3
TRAY4 = Tray4
TRAY5 = SMH
<ESC>&lint H
Where int is one of the following:
0 = Feed paper from default tray
4 = Tray1
1 = Tray2
5 = Tray3
8 = Tray4
20 = Auto
2 or 3 = SMH
Output
@PJL SET OUTBIN = value
Where value is one of the following:
Location
UPPER = main tray
MAINTRAY = main tray
CENTERTRAY = main tray
OUTBIN101 = finisher stacker
Stapling
@PJL SET STAPLE = value
Where value is one of the following:
TOPDUAL
TOPLEFT
TOPRIGHT
BOTTOMDUAL
BOTTOMLEFT
BOTTOMRIGHT
LEFTDUAL
RIGHTDUAL
NONE
Collation
@PJL SET QTY = int
Where int is:
1～999
(When you use this parameter,
collation is automatically enabled.)
Resolution
Quantity
@PJL SET RESOLUTION =
Where value is one of the following:
value
600
1200
@PJL SET COPIES = int
Where int is:
1～999
Use this parameter for uncollated
sets.
WorkCentre M128/M123 Reference Guide
Page 13
dc05cc0364
Feature
Implementation
<ESC>&lint X
Values
Where int is:
1～999
Simplex
@PJL SET DUPLEX =
Where value1 = OFF (simplex)
value1
<ESC>&lint S
Where int is one of the following:
0 = simplex
Duplex
@PJL SET DUPLEX =
Where value1 = ON (duplex)
Where value2 is one of the following:
value1
@PJL SET BINDING =
LONGEDGE
SHORTEDGE
value2
(Use value2 combined with value1 =
ON)
<ESC>&lint S
Where int is one of the following:
1 = Duplex long edge binding
2 = Duplex short edge binding
Orientation
@PJL SET ORIENTATION
Where value is one of the following:
= value
PORTRAIT
LANDSCAPE
<ESC>&lint O
Where int is one of the following:
0 = Portrait
1 = Landscape
2 = Reverse portrait
3 = Reverse landscape
Force short
@PJL SET
Where value is one of the following:
edge feeding
PAPERDIRECTION = value
SEF = Short Edge Feed
LEF = Long Edge Feed
Job Mode
Job Type
@PJL JOB MODE = value
@PJL SET HOLD = value
(see Example 3)
Where value = PRINTER
Where value = PROOF (proof print)
@PJL SET HOLD = value
Where value = STORE (confidential
print)
@PJL SET
The HOLDKEY variable acts as a password
to release a job held by the Store value.
The variable value is any four-digit
value from 0000 to 9999. The default
value is “”.
HOLDKEY="four-digit string"
(see Example 4)
Page 14
dc05cc0364
WorkCentre M128/M123 Reference Guide
Feature
Implementation
Values
Interleaving
Paper
@PJL SET SLIPSHEET =
Where value is one of the following:
OFF = no slipsheet
value
BLANK = blank slipsheet
COPY = imaged slipsheet
Where string is a maximum of 32
characters (case sensitive)
Accounting
Delay Print
@PJL SET JOBATTR =
“@JOAU = string”
YYYY:MM:DD:hh:mm
@PJL SET JOBATTR =
“@PRTM =
YYYY = year (AD 2000～2099)
MM = month (1～12)
DD = day (1～31)
Hh = hour (0～23)
Mm = minute (0～59)
YYYY:MM:DD:hh:mm”
PCL Template
This section illustrates a standard PCL template used to access general print
features as well as WorkCentre product-specific features. This template lists
each feature and the syntax, both PCL commands and PJL, required to use
these features. The next section of this document contains other examples of
how to use these commands.
Section 1 (Opening Command, required for all files)
<ESC>%-12345X@PJL JOB MODE=PRINTER
Section 2 (PJL Set Commands)
@PJL SET RESOLUTION=600
@PJL SET COPIES=1
Section 3 (PCL Code used to invoke PCL Language)
@PJL ENTER LANGUAGE=PCL
Section 4 (PCL Data Stream or ASCII Document inserted here for Options
such as selecting different fonts, simplex, duplex, etc.)
,,,,,,,,,,
Section 5 (Closing Command, Required at end of Document)
<ESC>%-12345X@PJL EOJ
WorkCentre M128/M123 Reference Guide
Page 15
dc05cc0364
Sample PCL Headers
Example 1 Header for Simple Print
<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF>
@PJL COMMENT Beginning PCL Job<CR><LF>
@PJL SET OUTBIN=MAINTRAY<CR><LF>
@PJL SET QTY=1<CR><LF>
@PJL SET RESOLUTION=600<CR><LF>
@PJL SET JOBATTR=”@JOAU=Nagaoka” <CR><LF>
@PJL ENTER LANGUAGE=PCL<CR><LF>
PCL DATA ……….
<ESC>%-12345X@PJL EOJ <CR><LF>
Example 2 Header for Finishing Options
<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF>
@PJL COMMENT Beginning PCL Job<CR><LF>
@PJL SET OUTBIN=OUTBIN101<CR><LF>
@PJL SET FINISH=ON<CR><LF>
@PJL SET STAPLE=TOPLEFT<CR><LF>
@PJL ENTER LANGUAGE=PCL<CR><LF>
PCL DATA ……….
<ESC>%-12345X@PJL EOJ <CR><LF>
Example 3 Header for Proof Print
<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF>
@PJL COMMENT Beginning PCL Job<CR><LF>
@PJL SET OUTBIN=MAINTRAY<CR><LF>
@PJL SET QTY=2<CR><LF>
@PJL SET RESOLUTION=600<CR><LF>
@PJL SET HOLD=PROOF <CR><LF>
@PJL SET USERNAME="Nagaoka" <CR><LF>
@PJL SET JOBNAME="Job1" <CR><LF>
@PJL ENTER LANGUAGE=PCLXL<CR><LF>
PCL DATA ……….
<ESC>%-12345X@PJL EOJ <CR><LF>
Page 16
WorkCentre M128/M123 Reference Guide
dc05cc0364
Example 4 Header for Confidential Print
<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF>
@PJL COMMENT Beginning PCL Job<CR><LF>
@PJL SET OUTBIN=MAINTRAY<CR><LF>
@PJL SET QTY=1<CR><LF>
@PJL SET RESOLUTION=600<CR><LF>
@PJL SET HOLD=STORE <CR><LF>
@PJL SET HOLDKEY="1234"<CR><LF>
@PJL SET USERNAME="Nagaoka" <CR><LF>
@PJL SET JOBNAME="Job1" <CR><LF>
@PJL ENTER LANGUAGE=PCLXL<CR><LF>
PCL DATA ……….
<ESC>%-12345X@PJL EOJ <CR><LF>
PCL Feature Dependencies/Caveats
•
•
All PJL commands must be in the first 2,500 bytes of the job.
To combine printer escape commands (not including PJL commands):
−
−
The first two characters after the <esc> MUST be the same.
All alpha characters MUST be lowercase, except the final terminating
character.
−
−
Commands are read left to right. Combine commands in the order you
wish them to execute.
For example, combine print 5 copies (<ESC>&|5X) and use letter size
(<ESC>&|2A) as <ESC>&|5x2A.
•
•
In case of duplicate commands, the last one requested takes precedence.
The @PJL SET COPIES takes precedence over the PCL Escape
Command (<ESC>& | int X>) to set copies. In general, a PJL command
takes precedence over a PCL command.
•
•
•
•
Do not duplex any job with these media sizes: A6, B6. A request to duplex
these media sizes is ignored.
Do not staple any job with these media sizes: A6, B6, A5, 5.5 x 8.5. A
request to staple these media sizes is ignored.
Do not duplex any job with transparencies, labels, envelopes or tab-stock
The duplex print request is ignored if you use any of these media types.
Use one of these methods to specify media selection:
−
Describe the media attributes with size and type and allow the device to
select the correct source tray. If you describe the media, leave source
tray information out of the request or set to Auto. Otherwise, the tray
selection defeats the auto tray selection capabilities of the device.
−
Indicate the media feed tray to use. In doing so, you allow the device to
select media feed trays based on paper type defined by SYSTEM
DEFAULT unless specified otherwise. This method prevents
inadvertent use of special paper types. To override a paper type
definition, include a paper type specification of UNSPECIFIED in the
job.
WorkCentre M128/M123 Reference Guide
Page 17
dc05cc0364
PCL Fonts
The following PCL fonts are resident on the device.
Each of the commands reference a 12-point font. If you wish to use any other
point size, change the 12v to the desired size (.25 – 999.75).
The commands listed use the default symbol set, Roman-8. To change the
symbol set, include the alternate symbol set after the first <ESC> and before
the second <ESC>. Use the line printer examples as a reference.
Font Name
Albertus Medium
Albertus Extra Bold
Antique Olive
Antique Olive Bold
Antique Olive Italic
Arial
PCL Escape Command
<esc>(<esc>(s1p12v0s1b4362T
<esc>(<esc>(s1p12v0s4b4362T
<esc>(<esc>(s1p12v0s0b4168T
<esc>(<esc>(s1p12v0s3b4168T
<esc>(<esc>(s1p12v1s0b4168T
<esc>(<esc>(s1p12v0s0b16602T
<esc>(<esc>(s1p12v0s3b16602T
<esc>(<esc>(s1p12v1s0b16602T
<esc>(<esc>(s1p12v1s3b16602T
<esc>(<esc>(s1p12v0s0b4101T
<esc>(<esc>(s1p12v0s3b4101T
<esc>(<esc>(s1p12v1s0b4101T
<esc>(<esc>(s1p12v1s3b4101T
<esc>(<esc>(s1p12v0s0b4113T
<esc>(<esc>(s1p12v0s3b4113T
<esc>(<esc>(s1p12v1s0b4113T
<esc>(<esc>(s1p12v1s3b4113T
<esc>(<esc>(s1p12v4s3b4140T
<esc>(<esc>(s1p12v1s0b4116T
<esc>(<esc>(s1p12v0s0b4099T
<esc>(<esc>(s1p12v0s3b4099T
<esc>(<esc>(s1p12v1s0b4099T
<esc>(<esc>(s1p12v1s3b4099T
<esc>(<esc>(s1p12v0s0b4197T
<esc>(<esc>(s1p12v0s3b4197T
<esc>(<esc>(s1p12v1s0b4197T
<esc>(<esc>(s1p12v1s1b4197T
<esc>(8U<esc>(s0p16.67h8.5v0s0b0T
<esc>(0U<esc>(s0p16.67h8.5v0s0b0T
<esc>(10U<esc>(s0p16.67h8.5v0s0b0T
<esc>(11U<esc>(s0p16.67h8.5v0s0b0T
<esc>(12U<esc>(s0p16.67h8.5v0s0b0T
<esc>(1U<esc>(s0p16.67h8.5v0s0b0T
<esc>(<esc>(s1p12v0s0b4297T
<esc>(<esc>(s1p12v0s0b16901T
<esc>(<esc>(s1p12v0s3b16901T
<esc>(<esc>(s1p12v1s0b16901T
<esc>(<esc>(s1p12v1s3b16901T
<esc>(19M<esc>(s1p12v0s0b16686T
<esc>(579L<esc>(s1p12v0s1b31402T
<esc>(<esc>(s1p12v0s3b4148T
<esc>(<esc>(s1p12v1s3b4148T
<esc>(<esc>(s1p12v4s3b4148T
<esc>(<esc>(s1p12v5s3b4148T
<esc>(<esc>(s1p12v0s0b4148T
Arial Bold
Arial Italic
Arial Bold Italic
CG Times
CG Times Bold
CG Times Italic
CG Times Bold Italic
CG Omega
CG Omega Bold
CG Omega Italic
CG Omega Bold Italic
Clarendon Condensed
Coronet
Courier
Courier Bold
Courier Italic
Courier Bold Italic
Garamond Antiqua
Garamond Halbfett
Garamond Kursiv
Garamond Kursiv Halbfett
Line Printer (Roman-8)
Line Printer (Latin-1)
Line Printer (PC-8)
Line Printer (PC-8 D/N)
Line Printer (PC-850)
Line Printer (Legal)
Marigold
Times New
Times New Bold
Times New Italic
Times New Bold Italic
Symbol
Wingdings
Univers Bold
Univers Bold Italic
Univers Bold Condensed
Univers Bold Condensed Italic
Univers Medium
Page 18
WorkCentre M128/M123 Reference Guide
dc05cc0364
Font Name
Univers Medium Italic
Univers Medium Condensed
Univers Medium Condensed Italic
Letter Gothic
Letter Gothic Italic
Letter Gothic Bold
Times Roman
Times Italic
Times Bold
Times Bold Italic
Helvetica
Helvetica Oblique
Helvetica Bold
Helvetica Bold Oblique
CourierPS
CourierPS Oblique
CourierPS Bold
CourierPS Bold Oblique
SymbolPS
PCL Escape Command
<esc>(<esc>(s1p12v1s0b4148T
<esc>(<esc>(s1p12v4s0b4148T
<esc>(<esc>(s1p12v5s0b4148T
<esc>(<esc>(s1p12h0s0b4102T
<esc>(<esc>(s1p12h1s0b4102T
<esc>(<esc>(s1p12h0s3b4102T
<esc>(<esc>(s1p12h0s3b4102T
<esc>(<esc>(s1p12h0s3b4102T
<esc>(<esc>(s1p12h0s3b4102T
<esc>(<esc>(s1p12h0s3b4102T
<esc>(<esc>(s1p12v0s0b24580T
<esc>(<esc>(s1p12v1s0b24580T
<esc>(<esc>(s1p12v0s3b24580T
<esc>(<esc>(s1p12v1s3b24580T
<esc>(<esc>(s0p12h0s0b24579T
<esc>(<esc>(s0p12h1s0b24579T
<esc>(<esc>(s0p12h0s3b24579T
<esc>(<esc>(s0p12h1s3b24579T
<esc>(19M<esc>(s1p12v0s0b45358T
<esc>(<esc>(s1p12v0s0b24591T
<esc>(<esc>(s1p12v0s0b24591T
<esc>(<esc>(s1p12v0s0b24591T
<esc>(<esc>(s1p12v0s0b24591T
<esc>(<esc>(s1p12v0s-3b24623T
<esc>(<esc>(s1p12v1s-3b24623T
<esc>(<esc>(s1p12v0s2b24623T
<esc>(<esc>(s1p12v1s2b24623T
<esc>(<esc>(s1p12v4s0b24580T
<esc>(<esc>(s1p12v5s0b24580T
<esc>(<esc>(s1p12v4s3b24580T
<esc>(<esc>(s1p12v5s3b24580T
<esc>(<esc>(s1p12v0s0b24703T
<esc>(<esc>(s1p12v1s0b24703T
<esc>(<esc>(s1p12v0s3b24703T
<esc>(<esc>(s1p12v1s3b24703T
Palatino Roman
Palatino Italic
Palatino Bold
Palatino Bold Italic
ITC Bookman Light
ITC Bookman Light Italic
ITC Bookman Demi
ITC Bookman Demi Italic
Helvetica Narrow
Helvetica Narrow Oblique
Helvetica Narrow Bold
Helvetica Narrow Bold Oblique
New Century Schoolbook Roman
New Century Schoolbook Italic
New Century Schoolbook Bold
New Century Schoolbook Bold
Italic
ITC Avant Garde Book
ITC Avant Garde Book Oblique
ITC Avant Garde Demi
ITC Avant Garde Demi Oblique
ITC Zapf Chancery Medium Italic
ITC Zapf Dingbats
<esc>(<esc>(s1p12v0s0b24607T
<esc>(<esc>(s1p12v1s0b24607T
<esc>(<esc>(s1p12v0s2b24607T
<esc>(<esc>(s1p12v1s2b24607T
<esc>(<esc>(s1p12v1s0b45099T
<esc>(<esc>(s1p12v0s0b45101T
WorkCentre M128/M123 Reference Guide
Page 19
dc05cc0364
Additional Information
Xerox Customer Support welcomes feedback on all documentation - send
You can reach Xerox Customer Support at 1-800-821-2797 (USA),
Other Tips about Xerox multifunction devices are available at the following
XEROX ®, The Document Company ®, the digital X ®, and all Xerox product names are
trademarks of XEROX CORPORATION. Other trademarks belong to their respective owners.
Copyright © XEROX CORPORATION 2005. All Rights Reserved.
Page 20
WorkCentre M128/M123 Reference Guide
dc05cc0364
|