e-STUDIO202S
Online Manual
Start
How to Use the Online Manual
This Online Manual provides instruction for the operation of your new unit. Please read the following explanation of how
to use the Online Manual, and then search for the information that you need.
For more information about computers, operating systems and Acrobat Reader, please refer to the relevant manual or
help file.
1
How to Control the Online Manual
Takes you back page by page. To return to the previous link,
click the ( ) button on the menu bar of the Acrobat Reader.
Click this button to display the Table of
Contents of the Online Manual. From the Table
of Contents you can jump to various pages.
CONTENTS
Click this button to display the Index of the
Online Manual. From the Index you can
jump to various pages.
Takes you forward page by page.
1
INDEX
Following links
Links can connect parts of a document to other parts for further information. In this document, green colored letters are linked areas.
To follow a link, select a hand tool ( ), a zoom tool or a selection tool. Position the pointer over the linked area on the page until the pointer
changes to a hand with a pointing finger ( ). Then click the link.
Using Bookmarks
This online manual has Bookmarks on the main pages of each section. You can move to the desired pages by simply clicking its bookmark.
How to Print Out the Online Manual
I
n order to print out a hard copy of the Online Manual for your reference, go to Acrobat Reader, click the "File" menu, and
select "Print". After specifying the printer setting, click the "OK" button to print.
zIn this online manual, screen images and operating procedures are mainly for Windows XP. With other versions
of Windows, some screen images may be different from those in this manual.
zWherever "e-STUDIOXXXX" appears in this manual, please substitute your model name for "xxxx".
zFor your information, please note that the ADF and the second cassette are provided as an option.
Note
1
Printing Overview
The flow chart shown below provides printing overview.
2
zWhen the paper source is the paper tray or multi-bypass tray, verify that the paper has been loaded before starting
printing.
zEnsure printing has been completed before turning the power off. Do not remove the power cord before turning
Caution
the unit off.
Prepare the document you intend to print
Open the printer driver setup screen and set the print preferences
Reference:
Send print data from your computer
Printing
Exit printing
2
Basic Printing
This is a printing example using WordPad to print a document onto Letter size paper.
2
Start WordPad, make a new file, and enter the text
you intend to print.
Click the "Print" button in the "Print" dialog box.
On Windows 98/Me, click the "OK" button.
1
2
4
Select "Print" from the application's "File" menu.
TOSHIBA
e-STUDIOXXX
X
Make sure that "TOSHIBA e-STUDIOXXXX" is
selected as the current printer. If you intend to
change any print setting, click the "Preferences"
button to open the printer driver setup screen.
3
On Windows 98/Me, click the "Properties" button.
Printing starts according to your preferences.
TOSHIBA
e-STUDIOXXX
X
Windows 2000 does not have the "Preferences"
button on this dialog box. Switch to the desired
tab by clicking it to specify printer settings.
3
Note
Starting the Printer Driver Using the "Start" Button
You can open the printer driver and change the printer driver settings from the Windows "start" button. Settings adjusted
in this way will be the initial settings when you print from an application. (If you change the settings from the printer
driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the application.)
2
Windows 2000/XP/Vista
Windows 98/Me
Click the "start" button, and then click "Control
Panel".
On Windows 2000, click the "Start" button and select
"Settings".
Click the "Start" button, select "Settings" and then
click "Printers".
1
2
1
2
Click the "TOSHIBA e-STUDIOXXXX" printer driver
icon and select "Properties" from the "File" menu.
Click "Printers and Other Hardware", and then click
"Printers and Faxes".
• On Windows Vista, click "Printer".
• On Windows 2000, click "Printers".
Click the "TOSHIBA e-STUDIOXXXX" printer driver
icon and select "Properties" from the "File" menu.
3
Click the "Setup" tab.
3
The printer driver setup screen will appear.
Reference: Printer Driver Settings
On Windows Vista, click "Printer".
Click the "Printing Preferences" button in the
"General" tab.
The printer driver setup screen will appear.
4
4
Printer Driver Settings
To view Help for a setting, click the ( ) button in the upper right-hand corner of the window and then click the setting.
2
Tab
Index which allows you to
switch between the various
setup screens.
(
) button
Click this button and then click a
setting to view Help for the setting.
Check box
Click this option to activate/
deactivate each function.
You can also view Help by
right-clicking the setting
with the mouse.
Note
The settings you made at
"N-Up Printing", "Document
Style", "Fit To Paper Size",
"Image Orientation" and
"Watermark" are shown in
this image.
Drop-down list
Allows you to make one
selection from a list of choices.
"Apply" button
Check button
Click to save your settings
Allows you to select one
without closing the dialog box.
item from a list of options.
The "Apply" button does
not appear when you
open this window from
The tray selected in
"Paper Selection" in the
"Paper" tab appears in
blue.You can also click
on a tray to select it.
Note
an application.
"Help" button
"OK" button
"Cancel" button
The Help window will open to
let you view explanations of the
settings on the tab.
Click this button to save
your settings, and exit the
dialog box.
Click this button to exit the dialog
box without making any changes to
the settings.
5
Printing a Watermark
To print a watermark, for example "CONFIDENTIAL", on your document, refer to the following steps. Open the printer
2
driver and click the "Watermarks" tab.
How to Print a Watermark
From the "Watermark" drop-down list, select the watermark, for example "CONFIDENTIAL", you wish to print on your
document, and start printing.
Print sample
For details on watermark settings, view printer driver Help.
Reference: Printer Driver Settings
6
Fitting the Printed Image to the Paper
This printer driver can adjust the zoom ratio for printing according to the paper loaded in the unit.
Follow the steps shown below to use this function. The instruction below assumes that you intend to print a Letter or A4
size document onto an Invoice or B5.
2
The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.
Reference: Printing Multiple Pages on One Page
Note
Click the "Paper" tab in the printer driver setup
screen.
Select the paper size for "Fit To Paper Size", which
corresponds to the size of paper in the unit.
Now, the printed image will automatically fit the paper
set in the unit.
1
2
3
4
Select the paper size for the print data from "Paper
Size".
Paper Size: Letter or A4
Fit To Paper Size: Invoice or B5
Check the "Fit To Page" box.
Invoice or B5 size paper
Letter or A4 size document
(Paper Size)
(Fit To Paper Size)
7
Printing Multiple Pages on One Page
This feature allows you to print two or four document pages onto a single page.
2
To use this function, open the printer driver setup screen, select "2-Up" or "4-Up" for "N-Up Printing" on the "Main" tab.
The "N-Up Printing" setting is not available when "Fit To Paper Size" is selected.
Reference: Fitting the Printed Image to the Paper
Note
N-Up
Border
Border
"2-Up"
"4-Up"
If you select the "Border" checkbox, border lines will be printed on each page.
8
Outline of the Print Status Window
When printing begins, the Print Status Window activates and appears on the screen.
The Print Status Window is a program designed to show the current printer status including the document name being
printed and error messages.
2
Status icon
This icon informs you of the print status.
Status window
Provides details on the current
status of the print job.
Document Name
Displays the name of the active print
job.
Tab
Index which allows you to switch
"Cancel Job" button
between the two setup screens.
Printing can be canceled by clicking
this button before the machine
receives the job.
"Help" button
Click this button to display help file
for the Print Status Window.
"Close" button
Click this button to close the Print
Status Window.
9
Scanning Overview
The flow chart shown below provides scanning overview.
3
When scanning from TWAIN*1-compliant
or WIA*2-compliant application
When scanning from "Scanner and
Camera Wizard" (Windows XP)
Using the unit to begin scanning*3
Place the original in the scanning position
Reference: For more detail, refer to the "ORIGINAL PLACEMENT" in the Operation Manual.
Start up a Twain-compliant or WIA-
compliant application, and select
the unit's scanner driver.
Start up the "Scanner and Camera
Wizard" from "Control Panel" in
your computer.
Change the unit to scanner mode
and select scan menu (SC1 to SC6)
on the operation panel.
Set the scan preferences
Scanning
Reference: Scanning an Image from a
Scanning an Image from a
(Windows XP/Vista)
Scanning
Reference: Scanning an Image from the
Scanning
Reference: "USING THE SCANNER
MODE" in the Operation
Manual,
Wizard" (Windows XP)
*1:TWAIN is an industry standard for interface of image data processing devices including scanners. By installing a TWAIN driver onto your computer,
you can scan and work with images using a variety of TWAIN-compliant applications.
*2:WIA (Windows Imaging Acquisition) is a Windows function that allows a scanner, digital camera or other imaging device to communicate with an
image processing application. The WIA driver for this unit can only be used in Windows XP/Vista.
*3:To scan using the unit's operation panel, you must first install Button Manager and establish the appropriate settings in the Control Panel. For
details, see "USING THE SCANNER MODE" in the Operation Manual. Note that not all scanner functions are available using Button Manager.
10
Scanning an Image from a TWAIN-Compliant Application (part 1)
The TOSHIBA scanner driver conforms to TWAIN, the industry standard, making it compatible with a variety of TWAIN-
compliant applications. Below is a step-by-step guide for acquiring a scanned image to the Desktop Document Manager
desktop screen using Desktop Document Manager.
3
Place the original (s) you wish to scan on the
document glass/ADF.
Reference: For information on setting an original for scanning, refer
to "ORIGINAL PLACEMENT" in the Operation Manual.
Select "TOSHIBA e-STUDIO TWAIN S", and click the
"Select" button.
1
3
After starting Desktop Document Manager, click the
"File" menu and select "Select Scanner".
2
zIf you are using Windows XP/Vista, you can also
select "WIA-TOSHIBA e-STUDIOXXXX" to
scan using the WIA driver.
Note
Reference: Scanning an Image from a WIA-
Vista)
z
Depending on your system, "TOSHIBA
e-STUDIO TWAIN S 1.0 (32-32)" and "WIA-
TOSHIBA e-STUDIOXXXX 1.0 (32-32)" may
appear in the "Select Source" screen.
zThe method for accessing the "Select Scanner"
option, depends upon the application. For more
information, refer to the manual or the help file
of your application.
11
Scanning an Image from a TWAIN-Compliant Application (part 2)
3
4
Select "Acquire Image" from the "File" menu, or
click the "Acquire" button ( ).
The scanner driver setup screen will appear.
Specify the scanning area, and set the scan
preferences.
For information on specifying the scan area and setting
the scan preferences, see scanner driver Help.
7
In the "Scanning Position" menu, select the
position in which you placed the original in Step 1
("Platen" (document glass) or "ADF").
Select "ADF" when you placed the original in the ADF.
Setting a large area with full color together with a
5
high resolution setting, makes the data size large,
resulting in extended scanning times. It is
recommended to set the scanning preferences
depending on the type of the original to be
scanned, i.e., Web Pages (monitor), Photo, FAX,
or OCR.
Caution
Click the "Scan" button after setting your preferences.
To cancel your scanning job after clicking the "Scan"
button, press the [Esc] key on your keyboard.
8
Click the "Preview" button.
6
The preview image will appear.
When you close the scanner driver after scanning, the
image data will appear as a new file in Desktop
Document Manager.
z
If the rotation or angle of the image is different, reset
the original, and click the "Preview" button again.
zIf you set multiple pages on the ADF, the unit
previews only the page placed on the top of the
originals, and then sends it to the original exit
area. Return the previewed page to the ADF
before starting the scanning job.
Note
12
Scanning an Image from a TWAIN-Compliant Application (part 3)
3
Scanner Driver Settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the "Preview
screen", which shows the scanned image. For details on the scan settings, click the "Help" button to display Help.
Set-up screen
"Scanning Position" menu
Select the desired scanning position from
"Platen" (document glass) or "ADF".
"Scanning Mode" menu
Switch the scanning mode between the
"Preset" and "Custom Settings" screen.
For details on each of these settings, click
the "Help" button to display Help.
Select "ADF" when you placed the
original in the ADF.
Note
"Preview" button
Previews the document.
If "Preview" is canceled by
immediately pressing the [Esc] key
on your keyboard or the clear key
Note
"Scan" button
on the unit, there may be no
images displayed on the preview
screen.
Click to scan an original or image according
to your preferences. Before clicking the
"Scan" button, check if your preferences are
set correctly.
To cancel your scanning job after
clicking the "Scan" button, press the
[Esc] key on your keyboard or the
clear key on the unit.
"Zoom Preview" check box
If the [Zoom Preview] checkbox is selected
before the [Preview] button is clicked, the
selected area will be enlarged in the preview
window.
Note
13
Scanning an Image from a TWAIN-Compliant Application (part 4)
Preview screen
3
Preview window
Click the "Preview" button in the Set-up
screen to display the scanned image.You
can specify the scanning area by dragging
the mouse inside the window.
"Auto Scan Area Adjustment" button
Click when the preview screen is displayed to
automatically set the scanning area.
"Rotate" button
Each time this button is clicked, the preview
image rotates 90 degrees. This lets you
change the orientation of the image without
picking up and placing the original again. The
image file will be created using the
orientation that appears in the preview
window.
Click the "Auto Scan Area
Adjustment" button to adjust
the scanning area
automatically.
Entire preview screen
"Image Size" button
Click to open a dialog box that allows you to
specify the scanning area by entering
numbers. Pixels, mm, or inches can be
selected for the units of the numbers. By
initially specifying a scanning area, numbers
can be entered to change that area relative
to the top left corner as a fixed origin.
"Help" button
Click to display the help file for the scanner
driver.
14
Scanning an Image from a WIA-Compliant Application (Windows XP/Vista) (part 1)
If you are using Windows XP/Vista, you can use the WIA driver to scan from Desktop Document Manager, Paint and
other WIA-compliant applications. The procedure for scanning using Paint is explained in the following.
3
If you have WIA drivers for other devices installed
in your computer, the "Select Device" screen will
open. Select "TOSHIBA e-STUDIOXXXX" and
click the "OK" button.
Place the original you wish to scan on the
document glass/ADF.
Reference: For information on setting an original for scanning, refer
to "ORIGINAL PLACEMENT" in the Operation Manual.
1
Note
After starting Paint, click the "File" menu and select
"From Scanner or Camera".
The scan screen of the WIA driver will appear.
2
TOSHIBA
e-STUDIOXXX
X
15
Scanning an Image from a WIA-Compliant Application (Windows XP/Vista) (part 2)
3
3
Select the paper source and picture type, and click
the "Preview" button.
Click the "Scan" button.
4
Scanning begins and the image is acquired into Paint.
Use "Save" in your application to select a file name and
folder for the scanned image, and save the image.
To cancel your scanning job after clicking the "Scan"
button, click the "Cancel" button.
The preview image will appear.
If you placed the original on the document glass, select
"Flatbed" for the "Paper source".
If you placed the original in the ADF, select "Document
Feeder" for the "Paper source" and specify the original
size in "Page size".
zIf you select "Document Feeder" for the "Paper
source" and click the "Preview" button, the top
original in the ADF is previewed. The previewed
Note
original is sent to the original exit area and the
following original stops in the ADF. To eject the
original, press "C (clear)" key and return those
ejected originals to the ADF before starting the
scanning job.
zTo view Help for a setting, click the ( ) button
in the upper right-hand corner of the window
and then click the setting.
16
Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 1)
The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner
and Camera Wizard" lets you scan an image without using a WIA-compliant application.
3
Place the original you wish to scan on the
document glass/ADF.
Reference: For information on setting an original for scanning, refer
to "ORIGINAL PLACEMENT" in the Operation Manual.
Click the "Next" button.
1
4
Click the "start" button, click "Control Panel", click
"Printers and Other Hardware", and then click
"Scanners and Cameras".
2
Click the "TOSHIBA e-STUDIOXXXX" icon and then
click "Get pictures" in "Imaging Tasks".
The "Scanner and Camera Wizard" will appear.
3
17
Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 2)
3
5
Select the "Picture type" and "Paper source", and
click the "Next" button.
Specify a group name, format and folder for saving
the image, and then click the "Next" button.
6
If you placed the original on the document glass, select
"Flatbed" for the "Paper source".
JPG, BMP, TIF or PNG can be selected for the format.
To begin scanning, click the "Next" button.
If you placed the original in the ADF, select "Document
Feeder" for the "Paper source" and specify the original
size in "Page size".
You can click the "Preview" button to display the
preview image.
zIf you select "Document Feeder" for the "Paper
source" and click the "Preview" button, the top
original in the ADF is previewed. The previewed
Note
original is sent to the original exit area, so you
will need to return it to the ADF before starting
the scanning job.
zTo adjust the resolution, picture type, brightness
and contrast settings, click the "Custom
settings" button.
18
Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 3)
3
7
When scanning ends, the following screen will
appear. Select the next task you wish to perform,
and then click the "Next" button.
Click the "Finish" button.
The "Scanner and Camera Wizard" closes and the
scanned image is saved in the specified folder.
8
If you are ready to end the session, click "Nothing. I'm
finished working with these pictures".
19
Outline of Button Manager
Button Manager is a utility software to link scanning functions to the SCAN key on the unit. This software enables you to
3
set scanning functions to six different scan menus, which will be linked to the SCAN key on the unit.
Reference: To begin scanning using the unit's operation panel, settings must be established in the Control Panel after the Button Manager is
installed. For information on installing the Button Manager, establishing the Control Panel settings, and scanning using the unit's
operation panel, see "USING THE SCANNER MODE" in the Operation Manual.
The functions of Button Manager are shown below.
Tab
"Application Selection" area
Click to set scan menu
Select the start-up application
options.
here.
Show TWAIN setting screen
when scanning
"Scan Setup" area
You can select whether or not the
Set the scan conditions.
TWAIN screen is shown. When
the checkbox is selected, the
TWAIN screen appears when
scanning is executed to let you
Some applications
may limit your choice
of settings.
Note
adjust the scanning conditions.
"OK" button
Click to save your settings,
and exit the dialog box.
"Help" button
Click this button to display the
help file for Button Manager.
"Cancel" button
Click this button to exit the
dialog box without making
any changes to the
settings.
"Apply" button
Click to save your settings without
closing the dialog box.
You can specify and change your six scan menu options from five functions. Refer to Button Manager Settings to specify
and change the scan menu options.
Close the source application before using the SCAN key on the
unit.
20
Note
Button Manager Settings
After being installed, Button Manager normally keeps active under the Windows operating system. Follow the steps
3
shown below to set scan options as you like.
For details on the settings in the setting screen of Button Manager, see Button Manager Help.
Right-click the Button Manager icon ( ) on the task
bar.
Set up the start-up application in the "Application
Selection" area.
1
4
zWhen the "Show TWAIN setting screen when
scanning" checkbox is selected, the scan
setting screen appears when scanning is
If the Button Manager icon does not appear on the
task bar, click the "start" button, select "All
Programs" ("Programs" on Windows 98/Me/2000),
select "TOSHIBA Button Manager S", and then
click "Button Manager" to start Button Manager.
Note
executed to let you adjust the scanning
conditions.
Note
zIf an application other than "Desktop Document
Manager" is selected in the "Application
Selection" area, only one original can normally
be scanned. If "Desktop Document Manager" is
selected, multiple originals loaded in the ADF
can be scanned in a single operation.
Select "Settings" from the displayed pop-up menu.
The setting screen of Button Manager will open.
2
Click the tab of the scan menu you want to set up.
3
Set up the "Color Mode", "Edge" and other scan
settings in the "Scan Setup" area.
5
Click the "OK" button.
6
You have completed the settings.
21
Identifying Unit Problems
When any trouble has occurred in the unit, first, verify whether you can make a copy or not with the unit. Check the
4
items shown below when the unit does not work properly but it can make a copy.
Reference: If any copier trouble occurs, refer to "TROUBLESHOOTING" in the Operation Manual.
What type of trouble do
you have?
Check the Connection between
2
1
A
B
• Printing trouble
• Scanning trouble
A
B
Printing trouble
When one of the troubles listed below occurs while
printing, check the corresponding item.
Scanning trouble
When one of the troubles listed below occurs while
scanning data, check the corresponding item.
Make sure that the unit is not working. You cannot print from your computer or scan from the unit while the unit is
making copies.
Note
If you fail to solve the problem after verifying all the items listed above, please contact your authorized service
representative.
22
Check the Connection between the Unit and Computer
4
CHECK 1 Is the interface cable compatible with the
If the USB cable becomes disconnected
If the USB cable becomes disconnected, even only once during
the unit's operation, then printing and scanning may be
disrupted.
If this occurs, check the USB cable and ensure that it is
securely connected, then restart the computer.
unit and computer?
Interface cable compatible with this unit is USB
cable.
USB cable
Use a shielded cable.
CHECK 2 Is the interface cable connected securely?
Check if the interface cable is securely plugged into
the connectors of the unit and computer. It is also
advisable to ensure that the connector pins are not
bent.
Reference: See "INSTALLING THE SOFTWARE" in the
Operation Manual for more details on
interface connection.
CHECK 3 Are any other USB peripherals being
connected along with the unit?
If other USB peripherals are connected through the
same hub, disconnect them to see if the problem
still exists.
23
Check Your Computer
Reference: Plug and Play Screen does not Appear
4
CHECK 1 Is there enough computer memory or hard
CHECK 2 Is your hard disk fragmented?
When data is frequently stored/deleted, the hard
disk may become fragmented causing a reduction
in printing or scanning speed. In this case it is
recommended to defragment your hard disk. You
may use the Windows tools or a commercially
available hard disk defragmenting tool.
disk space?
To use this unit, you must have an adequate
amount of hard disk space. If there is insufficient
hard disk space, delete unnecessary files to
increase the free space of the hard disk. If there is
insufficient memory, close unnecessary applications
to increase memory available for printing or
scanning. If you are still unable to print or scan,
install more memory into your computer.
24
Plug and Play Screen does not Appear
If the Plug and Play screen does not appear after you connect the unit to your computer with a USB cable and turn on
4
the power of both devices, follow the steps below to verify that the USB port is available.
If the "System" icon does not appear on Windows
Me, click "view all Control Panel options" to view
it.
Click the "start" button, click "Control Panel", and
then click "Performance and Maintenance".
• On Windows Vista, click the "start" button, click "Control
Panel", and then click "System and Maintenance".
• On Windows 98/Me/2000, click the "Start" button,
select "Settings", and then click "Control Panel".
1
Note
Click the ( ) icon beside the "Universal Serial Bus
controllers".
3
4
Click "System", click the "Hardware" tab, and click
the "Device Manager" button.
• On Windows Vista, click the "Device Manager", and if
a message screen appears asking you for
confirmation, click "Continue".
• On Windows 2000, double-click the "System" icon, click the
"Hardware" tab, and click the "Device Manager" button.
• On Windows 98/Me, double-click the "System" icon
and click the "Device Manager" tab.
• "Universal Serial Bus controllers" will appear in the list
of devices.
2
Two items will display, your Controller chipset type and
Root Hub. If these items appear, you can use the USB
port. If the "Universal Serial Bus controllers" shows a
yellow exclamation point or does not appear, you must
check your computer manual for USB troubleshooting
or contact your computer manufacturer.
When you make sure that the USB port is enabled,
install the software, referring to "INSTALLING THE
SOFTWARE" in the Operation Manual.
25
Failed to Install the Driver (Windows 2000/XP)
If the driver cannot be installed under Windows 2000/XP, check your computer's settings according to the following
4
procedure.
Click the "start" button, and then click "Control
Panel".
On Windows 2000, click the "Start" button, select
"Settings", and then click "Control Panel".
Check the "What action do you want Windows to
take?" ("File signature verification" on Windows
2000).
1
4
Click "Performance and Maintenance", and then
click "System".
On Windows 2000, double-click the "System" icon.
2
3
Click the "Hardware" tab, and then click the "Driver
Signing" button.
The following dialog box will open.
If the option "Block" has been selected for your
computer, then the driver will not be installable. Select
the option "Warn" and then install the driver as
explained in "INSTALLING THE SOFTWARE" in the
Operation Manual.
26
Faint, Uneven or Smeared Print Output
If print output is faint, uneven or smeared, follow the steps listed below.
4
CHECK 1 Has the printer driver been specified to suit
CHECK 5 Is it near time to replace the toner cartridge?
When it is near time to replace the toner cartridge,
the toner cartridge replacement required ( )
indicator will light up on the unit operation panel.
When it is time to replace the cartridge, the
indicator will blink. Replace the cartridge and try
printing again.
both paper and the print job?
You can select "Draft", "Normal" or "Photo" for the
print quality in the "Advanced" tab of the printer
driver setup screen. When "Photo" is selected, you
can click the "Image Adjustment" button and adjust
the brightness and contrast in the dialog box that
appears. Adjust these settings appropriately for
your print data and try printing again.
Reference: See "TONER CARTRIDGE
REPLACEMENT", in the Operation Manual.
CHECK 6 Is the maintenance indicator lit?
When the maintenance ( ) indicator lights up,
service by an authorized TOSHIBA service
technician is required. Contact your authorized
service representative as soon as possible.
CHECK 2 Is the paper curled?
If the paper is curled, straighten it up and set it in
the unit again.
CHECK 3 Is the paper too thick or too thin?
2
CHECK 7 Did you set sufficient margins in the paper
Only paper weighing from 15 lbs. to 21 lbs. (56 g/m
2
settings of your application?
to 80 g/m ) can be used in the paper tray.
If the margins are set outside of the quality
guaranteed area, smudges or smears may appear
at the upper and lower edges of the paper.
When selecting the paper settings in the
application, set the margins from the top, bottom,
left and right edges of the paper to 5/32" (4 mm).
Only paper weighing from 15 lbs. to 34.5 lbs. (56 g/
m to 128 g/m ) can be used in the multibypass
tray.
2
2
CHECK 4 Is the developer replacement required
indicator lit?
When the developer replacement required ( )
indicator lights up, the developer should be
replaced. DEVELOPER REPLACEMENT SHOULD
ONLY BE DONE BY AN AUTHORIZED TOSHIBA
SERVICE TECHNICIAN. Contact your authorized
service representative as soon as possible.
27
Characters or Graphics are not Printed in Correct Position
If a document is printed skewed or partly off the paper, follow the steps listed below.
4
CHECK 1 Is the paper size loaded in the tray the same CHECK 3 Is the paper loaded correctly?
If a document is physically damaged when it is
as that specified in the printer driver?
Check if the "Paper Size" options suit the size of the
paper loaded in the tray.
If the "Fit To Page" setting is activated, make sure
that the paper size selected from the drop-down list
of the "Fit To Paper Size" option is the same as the
size of the loaded paper.
output or the image is skewed on the paper, discard
the damaged sheet, reinsert the paper supply and
print again. Insert the paper so that there is no
visible space between the paper and the paper
guides.
Reference: See "LOADING PAPER" in the Operation
Manual for more details on inserting paper.
CHECK 2 Is the orientation of document setting
CHECK 4 Did you correctly specify the margins for the
correct?
application in use?
Click the "Paper" tab in the printer driver setup
screen, and verify if the "Image Orientation" option
is set to your requirements.
Check the layout of the document margins and the
paper size settings for the application you are
using. Also check if the print settings are specified
correctly to suit the paper size.
Reference: Faint, Uneven or Smeared Print Output
28
Nothing Prints
If nothing prints even when the unit is turned on, please wait a few moments. The unit needs a longer time to process
4
intricate data. If the unit still does not print, refer to the check list below.
CHECK 1 Has a paper jam occurred?
CHECK 4 Has the printer driver been installed
properly?
When the misfeed ( ) indicator blinks or (
blinks in the display, the unit will stop because of a
misfeed.
Remove the jammed paper as explained in
"MISFEED REMOVAL" in the Operation Manual.
)
Check if the printer driver has been installed, following
1 tChleicsktetphseli"sstetadrbt"elbowu.tton, click "Control Panel",
click "Printers and Other Hardware", and then
click "Printers and Faxes".
• On Windows Vista, click the "start" button, click
"Control Panel" and then click "Printer".
• On Windows 98/Me/2000, click the "Start" button,
select "Settings" and then click "Printers".
2 Check if the "TOSHIBA e-STUDIOXXXX" printer
driver icon is shown.
CHECK 2 Is the ON LINE indicator off?
The ON LINE indicator on the operation panel turns
off while the unit is used for copying. Scanning and
printing is not possible at this time. When copying is
finished, the ON LINE indicator will turn on after the
set auto clear time elapses, and the unit will be
ready for scanning and printing. You can also press
the clear key twice or press the ON LINE key to
make the unit ready for scanning or printing.
CHECK 3 Is your unit selected correctly in the current
If you still cannot print after confirming the "TOSHIBA
e-STUDIOXXXX" printer driver icon, the printer driver
may not have been installed correctly. In this case,
delete the software and then reinstall it.
application for the print job?
When choosing "Print" from the "File" menu located in
applications, be sure you have selected "TOSHIBA
e-STUDIOXXXX" printer displayed in the "Print" dialog
box.
Reference: Uninstalling the Software
TOSHIBA
e-STUDIOXXX
X
29
Poor Scanning Result
If you get poor quality as a result of scanning a job, and you cannot improve the quality by changing preferences, refer
4
to the check list shown below.
CHECK 1 Is the original clean?
CHECK 4 Have you adjusted the brightness and
contrast suitably?
Check your original before scanning. If any dust
sticks to the original, you cannot obtain a clean
result. In addition, make sure that the document
glass is also clean.
If you are scanning with a TWAIN-compliant
application and the resulting image has unsuitable
brightness or contrast (for example it is too bright),
activate the "Auto Brightness/Contrast Adjustment"
setting on the "Color" tab of the "Custom settings"
If you are scanning with a WIA-compliant
application or the "Scanner and Camera Wizard",
brightness and contrast in the screen that appears.
CHECK 2 Have you specified a suitable resolution?
Make sure that the value for the "Resolution" setting
in the scanner driver satisfies the requirement of the
set original.
Reference: Scanning an Image from a TWAIN-
Scanning an Image from the "Scanner and
CHECK 3 Have you specified a suitable value for the
"B/W Threshold" setting?
If you are scanning with a TWAIN-compliant
application and are using "Mono 2 gradation (no
Green)","Mono 2 gradation (no Red)" or "Mono 2
gradation (no Blue)" mode, make sure that a
suitable value is specified for the "B/W Threshold"
setting. A larger threshold value makes your output
darker, whilst a small threshold value makes it
lighter. To adjust the threshold automatically, click
the "Auto Threshold" button on the "Image" tab of
the "Custom Settings" screen.
Reference: Scanning an Image from a TWAIN-
30
The Scanned Image is Incorrectly Positioned
If the scanned image is incorrectly positioned, refer to the check list shown below.
4
CHECK 1 Have you placed the original straight?
CHECK 3 Have you set the original correctly on the
Place the original straight on the document glass.
ADF?
Reference: Refer to "ORIGINAL PLACEMENT" in the
Operation Manual for the detail on how to
set the original.
To scan from the ADF, align the guide to the original
as shown in the illustration below.
CHECK 2 Have you set the original correctly on the
document glass?
Place the original on the document glass in the
direction as shown in the illustration below.
Align the center of the original with ( ) mark.
Align the guide to the original.
31
Unable to Scan the Image
If you cannot scan the image, turn off your computer. Press the power switch on the unit to turn it off, unplug the unit from the power
4
source, and then plug it back in. Restart your computer. Try scanning again. If scanning is still not possible, refer to the check list below.
CHECK 1 Is your application compliant to TWAIN?
If you are using Windows 98/Me/2000 and your
application is not TWAIN compliant, the application
cannot acquire images. Use an application that is
TWAIN compliant, such as the included Desktop
Document Manager.
CHECK 6 Are you trying to scan multiple originals in the
ADF at once?
When multiple originals are loaded in the ADF, it
depends on your application whether only one original
can be scanned in a single operation, or whether
multiple originals can be scanned. Check which is
possible in your application. (Desktop Document
Manager allows multiple originals to be scanned in a
single operation.)
CHECK 2 Have you selected the scanner driver of this
unit on your application?
Make sure that the "TOSHIBA e-STUDIO TWAIN S" or
"WIA-TOSHIBA e-STUDIOXXXX" is selected on your
application.
CHECK 7 Does your computer's operating system
support the scanner driver?
The operating systems that support the unit's scanner
driver are Windows 98/Me/2000/XP/Vista.
Reference: Scanning an Image from a TWAIN-
CHECK 8 Have the scanner driver and Button Manager
been installed properly?
CHECK 3 Have you specified all scanning preferences
appropriately?
If normal scanning still cannot be performed even after
confirming the items on the above check list, delete the
software and then reinstall it.
Setting a large area with full color together with a high
resolution setting, makes the data size large, resulting in
extended scanning times. It is recommended to set the
scanning preferences depending on the type of original
to be scanned, i.e., Web Pages (monitor), Photo, FAX,
or OCR.
Reference: Uninstalling the Software
CHECK 4 Is there enough computer memory?
Your computer may not have enough available memory
to hold the document you want to scan. Lower the scan
resolution.
CHECK 5 Has the specified period of program timeout
already elapsed?
Neither printing nor scanning jobs can be sent to the
unit from your computer during the specified period of
program timeout after copying.
To send a scanning job immediately, press the clear key
twice, ONLINE key or SCAN key on the unit.
Reference: For more detail, refer to "USER
PROGRAMS" in the Operation Manual.
32
Uninstalling the Software
If printing or scanning is not possible, or Button Manager does not function correctly, check the items in "Nothing Prints" or
"Unable to Scan the Image". If you still cannot solve the problem, follow the steps below to uninstall the software (Printer driver,
Scanner driver, Button Manager), and then reinstall it.
4
Before uninstalling the software, close all applications.
Caution
Click the "start" button, and then click "Control
Panel".
• On Windows Vista, click the "Uninstall a program".
• On Windows 98/Me/2000, click the "Start" button,
select "Settings", and then click "Control Panel".
Restart your computer.
1
2
3
The deletion of the driver and Button Manager is
completed when you restart your computer. If you wish to
reinstall, follow the instructions in "INSTALLING THE
SOFTWARE" in the Operation Manual.
Click "Add or Remove Programs".
On Windows 98/Me/2000, double-click the "Add/
Remove Programs" icon.
The following dialog box will open.
TOSHIBA e-STUDIOXXXXSeries
Delete the "TOSHIBA e-STUDIOXXXX Series MFP driver" and
the "TOSHIBA Button Manager S" from the list of applications.
For more information, refer to your operating manual or to the
help files for your operating system.
33
Printer Driver Features (part 1)
5
Tab
Setting
Selections
Initial setting
Main
Copies
Collate
1 to 999
On/Off
1
On
N-Up Printing
Border
1-Up/2-Up/4-Up
On/Off
1-Up
Off
User Settings
[User Settings]
Setting Name
-
Factory Defaults
Up to seven names, 20 characters each
-
1
Paper
Ledger [Fit To Page]* , Letter, Legal, Executive, Invoice, Foolscap,
1
1
*2
Paper Size
Folio, A3 [Fit To Page]* , A4, A5, A6, B4 [Fit To Page]* , B5, COM10, Letter
Monarch, DL, C5, 8K [Fit To Page]* , 16K, Custom Paper
1
Fit To Page
Image Orientation
Paper Source
[Custom]
Width
On/Off
Off
Portrait/Landscape/Rotate 180 degrees
Tray 1, Tray 2 (Peripheral device), Bypass Tray
Portrait
Tray 1
2
2
3.87 to 8.50 (in.)/98.3 to 215.9 (mm.)
5.83 to 14.00 (in.)/148.0 to 355.6 (mm.)
inch/millimeters
3.87 (in.)*
5.83 (in.)*
Length
2
Size
inch*
(continued)
*1:Will be reduced to Letter (A4) size or the specified size before printing.
*2:This initial setting may vary depending on your operating system settings.
For information on each setting, see Help in the printer driver setup screen.
34
Printer Driver Features (part 2)
5
Tab
Setting
Print Quality
Selections
Initial setting
Normal
Draft/Normal/Photo
On/Off
2 Gradation Print
[Image Adjustment]
Brightness
Contrast
Off
Advanced
0 to 100
50
0 to 100
50
Watermark
Text
(None)/TOP SECRET/CONFIDENTIAL/DRAFT/ORIGINAL/COPY
(None)
-
-
Size
6 to 300
-90 to +90
0 to 255
On/Off
200
+45
192
Off
Watermarks
Angle
Gray Scale
On First Page Only
35
R080520F8700-TTEC
OME08009400
|
Philips 5460nb User Manual
Samsung Avmbh032ca0 User Manual
Samsung Aw1803b User Manual
Schumacher Inc 800a User Manual
Sony Bc Tra User Manual
Sony Found Not Kdl 52w4100 User Manual
Teledyne Automobile Parts Hfm I 401 User Manual
Woodstock Fine Air Filter W1746 User Manual
Xerox All In One Printer M15 User Manual
Xerox Copycentre C165 User Manual