Samsung Mh12zv 26 User Manual

OWNERS INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
ISTRUZIONI PER LUSO  
MANUAL DE INSTRUÇÕES  
MANUEL DUTILISATION  
GEBRAUCHSANWEISUNG  
Outdoor Unit  
Indoor Unit  
ASHM070VE  
ASHM120VE  
AXHM260VE  
MH07ZV-26  
MH12ZV-26  
XMH26ZV  
MULTI-SPLIT TYPE ROOM AIR CONDITIONER ( Cool and Heat )  
ACONDICIONADOR DE AIRE DOMÉSTICO SISTEMA MULTI SPLIT ( Refrigeración y Calefacción )  
CONDIZIONATORE DARIA PER PIÙ AMBIENTI AD UNITÀ SEPARATE ( Raffreddamento e Riscaldamento )  
AR CONDICIONADO MULTI SPLIT ( Refrigeração e Aquecimento )  
CLIMATISEUR DE TYPE MULTIPLE ( Refroidissement et Chauffage )  
RAUMKLIMAGERÄT IN MEHRFACH GETEILTER AUSFÜHRUNG ( Kühlen und Wärmen )  
E S I P F D DB68-30912B(4)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .......................................................................................  
View of the Indoor Unit .................................................................................  
View of the Outdoor Unit ..............................................................................  
Remote Control - Buttons and Display .........................................................  
Getting Started .............................................................................................  
Installing the Remote Control Holder on the Wall ........................................  
Inserting the Remote Control Batteries ........................................................  
Setting the Time ...........................................................................................  
2
4
4
5
6
7
7
8
OPERATING YOUR AIR CONDITIONER  
Selecting the Automatic Operating Mode .....................................................  
9
Cooling Your Room ....................................................................................... 10  
Heating Your Room ...................................................................................... 11  
Changing the Room Temperature Quickly ................................................... 12  
Removing Excess Humidity ......................................................................... 13  
Airing Your Room .......................................................................................... 14  
Adjusting the Air Flow Direction Vertically .................................................... 15  
Adjusting the Air Flow Direction Horizontally ............................................... 15  
PROGRAMMING YOUR AIR CONDITIONER  
Switching the Unit On and Off Automatically (On/Off Timer) ....................... 16  
Setting the Sleep Timer ................................................................................ 17  
Setting the Quick Timer ................................................................................ 18  
Cancelling the On/Off Timer ......................................................................... 19  
Cancelling the Sleep Timer .......................................................................... 19  
Cancelling the Quick Timer .......................................................................... 19  
RECOMMENDATIONS FOR USE  
Operating Recommendations ....................................................................... 20  
Temperature and Humidity Ranges .............................................................. 21  
Cleaning Your Air Conditioner ...................................................................... 21  
Solving Common Problems .......................................................................... 22  
Operating Your Air Conditioner Without the Remote Control ....................... 23  
Installing a Filter (Option) ............................................................................. 24  
Operation Function Chart ............................................................................. 25  
TECHNICAL SPECIFICATIONS  
E-3  
View of the Indoor Unit  
ON/OFF switch  
(operation without  
remote control)  
Air flow blades (outlet)  
Remote control sensor  
Air Filter  
(under the grille)  
Air Inlet  
TIMER  
FAN  
TURBO  
OPERATION  
OPERATION indicator  
- Operation : GREEN  
- Deice : RED  
TURBO indicator  
- RED  
TIMER indicator  
- YELLOW  
FAN indicator  
- GREEN  
View of the Outdoor Unit  
Air Inlet  
Air Outlet  
Connection Valve  
E-4  
Remote control - Buttons and Display  
Operating mode  
(AUTO, COOL, DRY, FAN, HEAT)  
Remote control transmission indicator  
Battery discharge indicator  
Temperature settings  
Turbo mode  
Sleep mode  
Air flow direction  
Fan speed  
(AUTO, LOW, MEDIUM, HIGH)  
Time/Timer settings  
On/Off button  
Temperature adjustment buttons  
Mode selection button  
Off Timer adjustment button  
Turbo mode button  
R
(AUTO, COOL, DRY, FAN, HEAT)  
Sleep timer button  
Air flow swing button  
Time setting Button  
Fan speed adjustment button  
Timer on/off buttons  
Time adjustment buttons  
Timer setting/cancellation buttons  
E-5  
Getting Started  
You have just purchased a split-type room air conditioner and it has been installed  
by your installation specialist.  
Your Ow ners Instructions contain m uch valuable inform ation on using your air  
conditioner. Please take the tim e to read them as they w ill help you take full advantage  
of the units features.  
The booklet is organised as follow s.  
The follow ing figures are show n on pages 4 and 5:  
- Indoor and outdoor units  
- Rem ote control (buttons and display)  
They w ill help you find the buttons and understand the sym bols displayed.  
In the m ain part of the docum ent, you w ill find a series of step-by-step  
procedures for each function available.  
The illustrations in the step-by-step procedures use three different sym bols:  
PRESS  
PUSH  
HOLD DOWN  
E-6  
Installing the Remote Control Holder on the Wall  
The rem ote control is supplied w ith a plastic holder that can be fitted  
to the w all to hold the rem ote control w hen you are not using it.  
To attach the holder to the w all, proceed as follow s.  
1
2
3
With a pencil, mark the positions of the two holes on the wall where the  
holder is to be installed.  
Drill the two holes and insert plugs as required for the type of wall on  
which the holder is being installed.  
Screw the holder into position.  
Result:  
You can now slide the remote control in and out of the  
holder as required.  
Inserting the Remote Control Batteries  
You m ust insert or replace the rem ote control batteries w hen:  
You purchase the air conditioner  
The rem ote control does not w ork correctly  
Use tw o LR03 1.5 V batteries. Do not use old batteries or  
different kinds of batteries together. Batteries m ay be  
com pletely discharged after 12 m onths, even if they have  
not actually been used.  
No t e  
1
2
Slide the remote control out of its holder.  
Push the battery cover on the rear of the remote control with your  
thumb in the direction of the arrow and remove it.  
3
4
Insert the two batteries, taking care to respect the polarities:  
+ on the battery with + on the remote control  
- on the battery with - on the remote control  
Close the cover by sliding it back until it clicks into place.  
E-7  
Setting the Time  
Your air conditioner contains a clock used to start and stop the unit  
autom atically at a given tim e.  
You m ust set the tim e w hen you:  
Purchase the air conditioner  
Replace the batteries  
No t e  
Be sure to reset the tim e w hen you change clocks from  
standard todaylight savings tim e and vice versa.  
Setting the Tim e for the First Tim e  
1
Insert the batteries.  
Push the battery cover on the rear of the remote control with your  
thumb and remove it.  
Result:  
The clock starts.  
2
3
Using a small pointed tool (ball-point pen for example), press the  
Result: The AM indication flashes.  
button.  
To set the current time, press the  
the remote control.  
or  
buttons under the cover on  
To...  
Then...  
Increase the time in one-minute intervals  
Increase the time in ten-minute intervals  
Decrease the time in one-minute intervals  
Decrease the time in ten-minute intervals  
Press the ()button.  
Hold down the ()button.  
Press the ()button.  
Hold down the ()button.  
Result:  
AM or PM is displayed to indicate whether the setting  
corresponds to a time before or after midday.  
4
When you are satisfied with your setting, confirm the time. To do so:  
using a small pointed tool (ball-point pen for example), press the button.  
Result:  
The AM or PM indication stops flashing.  
The clock starts.  
Resetting the Tim e  
If you have already set the tim e but w ish to change it,  
proceed as follow.  
1
Using a small pointed tool (ball-point pen for example), press the  
under the remote control flap.  
button  
Result:  
The AM or PM indication flashes.  
2
3
Set the time, following the instructions in Step 3 in the procedure above.  
When you are satisfied with your setting, confirm the time. To do so,  
press the  
example).  
button, using a small pointed tool (ball-point pen for  
Result:  
The AM or PM indication stops flashing.  
The clock starts.  
E-8  
Selecting the Automatic Operating Mode  
You can start the air conditioner in Autom atic m ode from your  
rem ote control. In the Autom atic m ode, the standard tem perature  
and the optim um fan speed is selected autom atically. You can adjust  
the standard tem perature but not the fan speed.  
1
If necessary, press the  
(On/Off) button.  
Result: The OPERATION indicator on the indoor unit comes on.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
R
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
IMPORTANT  
Plugged in  
Stopped  
It will start up normally after a three-minute.  
To perform 3-unit operation, refer to page 25,  
and select the appropriate operation mode.  
2
If the  
press the  
appears.  
indication is not displayed at the top of the remote control,  
button on the remote control one or more times until it  
Result: The indoor unit beeps each time you press  
.
The air conditioner starts up in AUTO mode.  
Note  
You can change modes at any time.  
R
3
To adjust the standard temperature (The air conditioner automatically  
set the standard temperature by the current room temperature.),  
press the  
or  
buttons one or more times.  
SET TEMP. SET TEMP.  
-2°C -1°C  
-
SET TEMP. SET TEMP.  
+1°C +2°C  
Standard temperature  
(
)
(
)
(
)
(
)
(
)
< When you feel hot >  
< When you feel chilly >  
R
E-9  
Cooling Your Room  
You m ust select the Cool m ode if you w ish to adjust the:  
Cooling tem perature  
Fan speed w hen cooling  
1
If necessary, press the  
(On/Off) button.  
Result: The OPERATION indicator on the indoor unit comes on.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
R
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
IMPORTANT  
Plugged in  
Stopped  
It will start up normally after a three-minute.  
To perform 3-unit operation, refer to page 25,  
and select the appropriate operation mode.  
2
If the  
press the  
appears.  
indication is not displayed at the top of the remote control,  
button on the remote control one or more times until it  
Result: The indoor unit beeps each time you press  
.
The air conditioner starts up in Cool mode.  
R
Note You can change modes at any time.  
3
To adjust the temperature, press the  
times until the required temperature is displayed.  
Possible temperatures are between 18°C and 30°C inclusive.  
Result: Each time you press or  
or  
buttons one or more  
:
- The temperature is adjusted by 1°C  
- The indoor unit beeps  
R
The air conditioner starts cooling, provided that the room  
temperature is higher than the selected temperature;  
the fan will, however, operate.  
4
Select the fan speed by pressing the  
button one or more times  
until the required setting is displayed:  
Low  
Medium  
High  
Automatic  
Result: Each time you press  
, the indoor unit beeps.  
5
To control the direction of the air flow, refer to page 15.  
E-10  
Heating Your Room  
You m ust select the Heat m ode if you w ish to adjust the:  
Heating tem perature  
Fan speed w hen heating  
1
If necessary, press the  
(On/Off) button.  
Result: The OPERATION indicator on the indoor unit comes on.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
R
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
IMPORTANT  
Plugged in  
Stopped  
It will start up normally after a three-minute.  
To perform 3-unit operation, refer to page 25,  
and select the appropriate operation mode.  
2
If the  
press the  
appears.  
indication is not displayed at the top of the remote control,  
button on the remote control one or more times until it  
Result: The indoor unit beeps each time you press  
.
The air conditioner starts up in Heat mode.  
R
Note You can change modes at any time.  
3
To adjust the temperature, press the  
times until the required temperature is displayed.  
Possible temperatures are between 16°C and 30°C inclusive.  
Result: Each time you press or  
or  
buttons one or more  
:
- The temperature is adjusted by 1°C  
- The indoor unit beeps  
The air conditioner starts heating, provided that the room  
temperature is lower than the desired temperature  
(selected temperature+3°C); the fan will, however, operate.  
R
4
Select the fan speed by pressing the  
button one or more times until  
the required setting is displayed:  
Low  
Medium  
High  
Automatic  
Result: Each time you press  
, the indoor unit beeps.  
For the first three to five minutes, the fan operates very  
slowly until the air has been sufficiently warmed. Once the  
correct temperature has been reached, the fan is  
automatically set to the required speed.  
5
To control the direction of the air flow, refer to page 15.  
E-11  
Changing the Room Temperature Quickly  
The Turbo cooling/ heating function is used to cool or heat your room as  
quickly as possible.  
Exam ple: You have just com e hom e and find that the room is very  
hot. You w ish to cool it dow n as quickly as possible.  
The Turbo function operates for 30 minutes with the maximum settings before  
returning automatically to the mode and temperature previously selected.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The OPERATION indicator on the indoor unit comes on.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
R
2
Press the  
Result:  
button.  
The temperature and fan settings are adjusted automatically.  
The TURBO indicator on the indoor unit lights up.  
R
The air conditioner cools or heats the room as quickly as possible.  
After 30 minutes, the air conditioner is reset automatically  
to the previous mode, temperature and fan settings.  
R
but, if you press the  
changed with  
button in or  
mode that is  
mode automatically.  
3
If you wish to stop the Turbo function before the end of the 30-minute period,  
R
press the  
button again.  
Result:  
The air conditioner is reset automatically to the previous mode,  
temperature and fan settings.  
R
but, if you press the  
changed with  
button in or  
mode that is  
mode automatically.  
4
To control the direction of the air flow, refer to page 15.  
E-12  
Removing Excess Humidity  
If the atm osphere in your room is very hum id or dam p, you can  
rem ove excess hum idity w ithout low ering the room tem perature too  
m uch.  
1
If necessary, press the  
(On/Off) button.  
Result: The OPERATION indicator on the indoor unit comes on.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
R
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
IMPORTANT  
Plugged in  
Stopped  
It will start up normally after a three-minute.  
To perform 3-unit operation, refer to page 25,  
and select the appropriate operation mode.  
2
If the  
press the  
appears.  
indication is not displayed at the top of the remote control,  
button on the remote control one or more times until it  
Result: The indoor unit beeps each time you press  
.
The air conditioner starts up in Dry mode.  
Note You can change modes at any time.  
R
3
To adjust the temperature, press the  
times until the required temperature is displayed.  
Possible temperatures are between 18°C and 30°C inclusive.  
or  
buttons one or more  
Result: Each time you press  
or  
:
- The temperature is adjusted by 1°C  
- The indoor unit beeps  
R
The air conditioner starts removing the excess humidity;  
the quantity of air is adjusted automatically.  
4
To control the direction of the air flow, refer to page 15.  
E-13  
Airing Your Room  
If the atm osphere in your room is stale, you can air the room using  
the Fan feature.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The OPERATION indicator on the indoor unit comes on.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
R
2
If the  
press the  
appears.  
indication is not displayed at the top of the remote control,  
button on the remote control one or more times until it  
Result: The indoor unit beeps each time you press  
The FAN indicator on the indoor unit lights up.  
The air conditioner starts up in Fan mode.  
The temperature is set automatically.  
.
Note  
You can change modes at any time.  
R
3
Select the fan speed by pressing the  
the required setting is displayed:  
button one or more times until  
Low  
Medium  
High  
Result: Each time you press  
, the indoor unit beeps.  
4
To control the direction of the air flow, refer to page 15.  
E-14  
Adjusting the Air Flow Direction Vertically  
Depending on the position of the indoor unit on the w all of your  
room , you can adjust the position of the outer air flow blade on the  
bottom of the unit, thus increasing the efficiency of the air  
conditioner.  
1
Press the  
button under the remote control flap one or more times  
as required.  
Result: The outer blade is adjusted vertically.  
RECOMMENDATION  
When...  
Cooling  
Heating  
Adjust the blade to face...  
Upwards.  
Downwards.  
2
3
If you want the blade to move up and down automatically when the air  
conditioner is operating, press the button.  
Result: The blade move up and down, around the base position set.  
To stop the blade moving up and down, press the button again.  
Note If you switch the air conditioner...  
Then the blade is...  
Closed completely.  
Off  
On again  
Reset to the position that you  
previously selected.  
Adjusting the Air Flow Direction Horizontally  
There are tw o sets of inner air flow blades. J ust as the outer air flow  
blade can be adjusted vertically, the inner blades can be adjusted  
horizontally.  
1
Open the air flow blade along the bottom of the indoor unit,  
by pressing the button.  
2
To stop the blade moving up and down, press the  
button again.  
3
Adjust each set of inner blades to the required position,  
by pushing or pulling them sideways.  
E-15  
Switching the Unit On and Off Automatically (On/Off Timer)  
You can set the tim er to sw itch the air conditioner on and/ or off  
autom atically at given tim es.  
Exam ple:  
You w ish to start cooling your room before you return  
from w ork; you decide to:  
Sw itch the air conditioner on at 5:30 p.m .  
Sw itch it off at 11:30 p.m .  
You can set:  
The sw itch-on tim e only  
The sw itch-off tim e only  
Both the sw itch-on and sw itch-off tim es  
Check that the current tim e is correct before setting  
the tim er; if it is not correct, refer to page 8 for details  
on how to set it.  
IMPORTANT  
1
2
If necessary, press the  
(On/Off) button.  
Select the required mode by pressing the  
button on the remote  
control one or more times until the appropriate indication appears  
(in the above example, ).  
R
3
4
Press the  
button under the cover on the remote control.  
indication flashes.  
The current preset time is displayed.  
Result: The  
Note  
If you do not press a button within a few seconds, the Timer  
function is cancelled and you must press the  
button again.  
To set the switch-on time, press the  
or  
buttons.  
To...  
Then...  
Increase the time in ten-minute intervals  
Increase the time in one-hour intervals  
Decrease the time in ten-minute intervals  
Decrease the time in one-hour intervals  
Press the button.  
Hold down the button.  
Press the button.  
Hold down the button.  
Result: AM or PM is displayed to indicate whether the setting  
corresponds to a time before or after midday.  
5
When you are satisfied with the switch-on time, press  
.
Result: The indoor unit beeps.  
The TIMER indicator on the indoor unit lights up yellow.  
Note  
If not necessary to operate the air conditioner until the set up  
time for starting, press  
(On/Off) button off.  
The air conditioner will start up automatically when the  
switch-on time is reached.  
6
To set the switch-off time, press the  
Result: The indication flashes.  
button.  
The current preset time is displayed.  
7
8
Set the switch-off time, following the instructions in Step 4.  
When you are satisfied with the switch-off time, press  
.
Result: The indoor unit beeps.  
The TIMER indicator on the indoor unit lights up yellow.  
The air conditioner will switch off automatically when the  
switch-off time is reached.  
No t e  
If you w ish to cancel the tim er, refer to page 19.  
E-16  
Setting the Sleep Timer  
The Sleep Tim er can be used w hen you are cooling or heating your  
room to sw itch the air conditioner off autom atically after a period of  
six hours.  
No t e  
If you w ish to sw itch the unit off at a specific tim e, refer  
to page 16.  
1
2
Make sure that you have selected either the  
or the  
mode.  
Press the  
Result: The indoor unit beeps.  
The indication is displayed.  
button .  
R
The air conditioner will be controlled as indicated in the  
illustrations below.  
Cooling The temperature is increased  
by 1°C every hour.  
2¡C  
When it has been increased  
by 2°C (after two hours), the  
temperature is maintained for  
four hours.  
1¡C  
Set  
TEMP.  
1hr 2hr  
6hr  
Start  
time  
Stop  
time  
Heating The temperature is decreased  
by 1°C every hour.  
Start  
time  
Stop  
time  
6hr  
When it has been decreased  
by 2°C (after two hours), the  
temperature is maintained for  
four hours.  
1hr 2hr  
Set  
TEMP.  
-1¡C  
-2¡C  
E-17  
Setting the Quick Timer  
The Quick Tim er enables you to set the air conditioner to sw itch off  
autom atically after a given period of tim e, by pressing one single  
button. The unit can be sw itched off autom atically after 30 m inutes,  
one hour, tw o hours, three hours or five hours.  
No t e  
If you w ish to sw itch the unit off at a specific tim e,  
refer to page 16.  
1
2
If necessary, switch the air conditioner on and select the required  
mode.  
Press  
one or more times until the correct period is displayed:  
Result: The TIMER indicator lights up yellow.  
The air conditioner will switch off automatically when the  
counter displayed on the remote control reaches  
.
R
E-18  
Cancelling the On/Off Timer  
If you no longer w ish to use the On/ Off Tim er that you have set, you  
can cancel it at any tim e.  
1
To cancel the...  
Then press...  
Switch-on timer  
.
Result:The  
indication flashes.  
indication flashes.  
Switch-off timer  
.
Result:The  
2
Press the  
button.  
Result: The indoor unit beeps.  
The TIMER indicator on the indoor unit switches off if no  
other timer is currently set.  
The air conditioner operates normally.  
Cancelling the Sleep Timer  
If you no longer w ish to use the Sleep Tim er that you have set, you  
can cancel it at any tim e.  
Press the  
Result:  
button.  
The indoor unit beeps.  
indication is no longer displayed.  
The air conditioner operates normally.  
The  
Cancelling the Quick Timer  
If you no longer w ish to use the Quick Tim er that you have set, you can  
cancel it at any tim e.  
Press the  
displayed.  
button one or more times until the current time indication is  
Result:  
The indoor unit beeps each time you press  
The air conditioner operates normally.  
.
R
E-19  
Operating Recommendations  
Here are a few recom m endations that you should follow w hen using  
your air conditioner.  
Topic  
Recommendation  
Heating performances  
The heat pump inside the air conditioner  
absorbs heat from outside air and brings it  
indoors. If the temperature of the outside air  
drops, the air conditioner will heat less. If you  
find that the room is not warm enough, use an  
additional heating appliance.  
Warm air circulation  
The air conditioner circulates warm air to heat  
your room; as a result, some time will be  
required after starting the air conditioner to  
warm the entire room. If necessary, set the air  
conditioner going a short time before you wish  
to use the room.  
Frost  
When outside temperatures are low and  
humidity is high, frost may form in the outdoor  
unit when heating with your air conditioner.  
If this happens:  
The heating operation is stopped.  
The Deice mode is triggered automatically  
for about seven minutes  
The OPERATION indicator on the  
indoor unit lights up red  
No intervention is required from you; after  
about seven minutes, the air conditioner starts  
operating again normally.  
High indoor and outdoor If both the indoor and outdoor temperatures  
temperatures  
are high and you select the Heat mode, the  
outdoor units fan and compressor may stop at  
times. This is normal; simply wait until the air  
conditioner switches on again.  
Power failure  
If a power failure occurs when the air  
conditioner is operating, the unit is switched off.  
When the power returns, you must press  
(On/Off) to restart it.  
E-20  
Temperature and Humidity Ranges  
The follow ing table indicates the tem perature and hum idity ranges,  
w ithin w hich the air conditioner can be used.  
If the air conditioner is used at... Then...  
High temperatures  
Low temperatures  
High humidity levels  
The automatic protection feature may  
be triggered and the air conditioner  
stopped.  
A water leakage or some other  
malfuction may happen because the  
heat exchanger freezes.  
Water may condense on and drip  
from the surface of the indoor unit if it  
is used for long periods.  
Mode  
Outdoor Temperature  
Indoor Temperature Indoor Humidity  
Heating  
Cooling  
Drying  
0°C to 24°C approx.  
21°C to 43°C approx.  
18°C to 43°C approx.  
27°C or less  
18°C to 32°C approx. 80% or less  
18°C to 32°C approx.  
-
-
◆◆ If the heating operation is used at below 0°C(outdoor tem perature)  
then, does not a full capacity.  
If the cooling operation is used at over 33°C(indoor tem perature)  
then, does not a full capacity.  
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner, you m ust  
clean it regularly to rem ove the dust that accum ulates on the air filter.  
Before cleaning your air conditioner, ensure that you  
have sw itched off the breaker used for the unit.  
IMPORTANT  
1
Open the front grille by pulling on the tabs on the lower right and left  
sides of the indoor unit.  
2
3
4
Lift out the bottom edge of the air filters and pull down to release them.  
Remove all dust on the air filters with a vacuum cleaner or brush.  
When you have finished, insert the top part of the filters into their slot  
and push down on the bottom edge until they click into place.  
5
Clean the front panel with a damp cloth and mild detergent (do NOT use  
benzene, solvents or other chemicals).  
Front grille  
No t e  
◆◆ If you have not used the air conditioner for a long period  
of tim e, set the fan going for three to four hours to dry the  
inside of the air conditioner thoroughly.  
Hook  
Body groove  
◆◆ The rem oval of the front grille facilitates your cleaning the  
air conditioner. After opening the front grille, lift up to the  
m ax, push slightly to the left, and pull dow n to release  
them and vice versa.  
E-21  
Solving Common Problems  
Before contacting the after-sales service, perform the follow ing sim ple checks.  
They m ay save you the tim e and expense of an unnecessary call.  
Problem  
Explanation/Solution  
The air conditioner does not  
operate at all  
Check that the breaker used for the air conditioner is switched on.  
Check that the OPERATION indicator on the indoor unit is on;  
if necessary press  
(On/Off) on the remote control.  
Check whether the TIMER indicator on the indoor unit is switched on.  
If so:  
- Wait until the switch-on time is reached and the air conditioner starts  
up automatically  
- Cancel the timer (see page 19 for further details)  
Check whether the operation modes of B unit and C unit are same.  
In case of B unit and C unit, the heating and cooling are not  
operated simultaneously but only the same operation is possible.  
If they are in different operation mode, the first operated unit is run  
but the later one does not operate so that the display part of indoor  
unit shows the flickering lamp of OPERATION (RED) and  
TURBO (RED). Refer to the page 25 for details.  
In case of B unit and C unit, the  
heating and cooling are not  
operated simultaneously  
The air conditioner does not  
operate with the remote control  
Check that there are no obstacles between you and the indoor unit.  
Check the remote control batteries.  
Check that you are close enough to the indoor unit (seven metres/  
yards or less).  
No beep is heard when you press  
(On/Off) on the remote control  
Check that you are pointing the remote control at the infrared sensor  
in the middle of the indoor unit.  
Replace the remote control batteries if necessary.  
The air conditioner does not cool  
or heat  
Check that the correct operating mode has been selected  
(
,
,
).  
The room temperature may be too low or too high.  
Dust may be blocking the air filter guard; refer to page 21 for cleaning  
instructions.  
Check that there is no obstacle in front of the outdoor unit.  
When heating, the required room  
temperature is never reached and  
the air conditioner frequently stops  
Check that the required temperature has been set correctly.  
Increase the fan speed.  
If the air flow is directed downwards, use the remote control to direct it  
upwards.  
The fan speed does not change  
Check that the operating mode is set to  
,
or  
; in the  
when you press the  
button  
mode, the fan speed changes automatically and in the  
it is set to AUTO.  
mode,  
The air flow direction does not  
change when you press the  
button  
Check that the air conditioner has been switched on; if necessary,  
press (On/Off) on the remote control.  
The timer is not correctly triggered  
Check that you have set the clock to the right time; see page 8.  
Check that the timer has been programmed correctly; see page 16.  
Odours are permeated in the room Air the room.  
during air conditioning  
E-22  
Operating Your Air Conditioner Without the Remote Control  
Your air conditioner can be operated directly from the indoor unit if  
the rem ote control is lost or broken.  
1
2
Open the front grille by pulling on the tabs on the lower right and left  
sides of the indoor unit.  
To switch the air conditioner on, press the ON/OFF switch on the right  
side of the indoor unit.  
Result: The OPERATION indicator on the indoor unit comes on.  
The indoor unit beeps.  
The air conditioner starts up in the most suitable mode for  
the room temperature:  
Room Temperature  
Less than 21°C  
21°C or above  
Operating Mode Temperature Setting  
Heat  
Cool  
22°C approx.  
24°C approx.  
3
To switch the air conditioner off, press the ON/OFF switch again.  
Note  
Even if the air conditioner has been switched on via the  
ON/OFF switch, operations can still be controlled using the  
remote control as usual.  
E-23  
Installing a Filter (Option)  
The air conditioner can be fitted w ith a deodorizing and Bio-pure  
filter to rem ove m inute dust particles or odours. The service life of  
the filter is approxim ately three m onths depending on the tim e  
during w hich the air conditioner is used.  
1
Remove the vinyl packing from the filter.  
Note  
Do not remove the packing from a deodorizing filter until you  
wish to use the filter, as it will lose its properties.  
Deodorizing  
filter  
2
3
4
Insert the filter in the filter holder and press the three insert tabs until  
you hear a click.  
Open the front grille by pulling on the tabs on the lower right and left  
sides of the indoor unit.  
Bio-pure  
filter  
Take out the existing filter and replace it with the new one.  
Air purifying system  
Model  
Indoor unit  
Deodorizing and  
Electro-static filter  
ASHM070VE  
MH07ZV-26  
Option  
(The unit can be attached  
with a commercially)  
ASHM120VE  
MH12ZV-26  
E-24  
Operation Function Chart  
A unit (12000BTU) is possible to operate in all m odes regardless  
of the operation m ode of B and C unit (7000 BTU).  
When trying to operate B unit and C unit(7000 BTU) sim ultaneously,  
select the operation m ode as show n in the follow ing table.  
B - Unit  
COOL  
C - Unit  
AUTO (COOL)  
COOL  
FAN  
DRY  
AUTO (COOL)  
FAN  
AUTO (COOL)  
COOL  
FAN  
DRY  
AUTO (COOL)  
AUTO (HEAT)  
COOL  
HEAT  
FAN  
DRY  
DRY  
AUTO (COOL)  
COOL  
FAN  
DRY  
AUTO (HEAT)  
HEAT  
AUTO (HEAT)  
HEAT  
FAN  
AUTO (HEAT)  
HEAT  
FAN  
Turn off the B-unit or change it into the "HEAT (COOL)" operation mode  
if you want to operate the C-unit in the "HEAT (COOL)" mode while  
the C-unit is being operated in the "COOL (HEAT)" MODE.  
Technical Specifications  
Model Indoor unit  
Power Supply  
ASHM070VE / ASHM120VE  
MH07ZV-26 / MH12ZV-26  
220-240V~, 50Hz  
E-25  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:  
QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA:  
ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR:  
CE CLIMATISEUR EST FABRIQUE PAR:  
DIESE KLIMAANLAGE IST FABRIZIERT VON:  
ELECTRONICS  
Printed in Korea  

Panasonic Kx Pw607dl User Manual
Samsung As14sggb User Manual
Samsung Aw109cb User Manual
Samsung Aw0609b User Manual
Samsung Aw0890 User Manual
Samsung Scx 4720f User Manual
Sanyo Kh2672r User Manual
Sealy Superstart 220V2 User Manual
Sennheiser 300 Iem G2 User Manual
Sharp Mx 7001 User Manual