Samsung Aw0890 User Manual

OWNER’S  
INSTRUCTIONS  
AW0690/AW0890  
AW1090/AW1290  
WINDOW-TYPE  
ROOM AIR CONDITIONER  
( Cool )  
E
F
DB68-01119A(3)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .........................................................................................  
Description of Each Component ....................................................................  
Remote Control - Buttons ..............................................................................  
Getting Started ...............................................................................................  
Inserting the Remote Control Batteries ..........................................................  
2
4
5
6
7
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room .........................................................................................  
Ventilating Your Room .....................................................................................  
8
9
Adjusting the Air Flow Direction Horizontally ................................................. 10  
Adjusting the Air Flow Direction Vertically ...................................................... 10  
Switching the Unit Off Automatically(Off Timer) ............................................. 11  
Selecting Energy Saving Mode ...................................................................... 12  
RECOMMENDATIONS FOR USE  
Power Failure .................................................................................................. 12  
Temperature and Humidity Ranges ................................................................ 13  
Cleaning Your Air Conditioner ......................................................................... 14  
Solving Common Problems ............................................................................ 15  
Technical Specifications ................................................................................. 15  
E-3  
Description of Each Component  
The design and shape are subject to  
change, depending on the model.  
Inner air flow blades  
(right/left orientation)  
Air outlet  
Outer air flow blades  
(up/down orientation)  
Air inlet (Outside)  
Ventilation lever  
Air inlet(Inside)  
Air filter(Inside)  
Power plug  
(The type of power plug  
may differ, depending on the  
local power supply.)  
Temperature/  
Timer settings  
Timer button  
On/Off button  
Timer indicator  
Temperature adjust-  
ment buttons  
Energy saver button  
Remote Control  
Sensor  
Energy saver indicator  
Fan speed  
Cool indicator  
Fan indicator  
adjustment button  
Fan speed indicator  
Operation mode  
selection button  
Swing indicator Swing button  
E-4  
Remote Control - Buttons  
Temperature adjustment  
buttons  
Timer button  
FAN/COOL mode  
selection buttons  
Fan speed adjustment  
buttons  
Energy saver button  
Swing button  
On/Off button  
E-5  
Getting Started  
You have just purchased a Sam sung w indow -type room air conditioner w hich should be installed  
follow ing your installation m anual.  
Your Ow ners Instructions contain m uch valuable inform ation on using your air conditioner.  
Please take the tim e to read them as they w ill help you take full advantage of the units features.  
The booklet is organized as follow s.  
The follow ing figures are show n on pages 4 and 5:  
-
-
Description of each com ponent  
Rem ote control (buttons)  
They w ill help you find the buttons and understand the sym bols displayed.  
In the m ain part of the docum ent, you w ill find a series of step-by-step procedures for each  
function available.  
The illustrations in the step-by-step procedures use four different sym bols:  
NOTE  
IMPORTANT  
PRESS  
PUSH  
E-6  
Inserting the Remote Control Batteries  
You m ust insert or replace the rem ote control batteries w hen :  
You purchase the air conditioner  
The rem ote control does not w ork correctly  
Use two AAA, LR03 1.5V batteries.  
Do not use old batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months, even  
if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your thumb  
in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities :  
+ on the battery with + on the remote control.  
- on the battery with - on the remote control.  
3
Close the cover by sliding it back until it clicks into place.  
E-7  
Cooling Your Room  
You m ust select the Cool m ode if you w ish to low er the tem perature  
in your room . You can also set the fan speed.  
Remote Control  
Control Panel  
Press the  
(On/Off) button.  
1
Result: The air conditioner starts up in the mode selected when the  
unit was last used.  
The unit beeps twice.  
The air conditioner is fitted with a protection mechanism to prevent  
the unit from being damaged when it is started immediately after  
being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the COOL indicator is not lit on the unit:  
Press the COOL button on the remote control  
or  
Press the Mode button on the unit one or more times until the COOL  
indicator lights up  
Result: The unit beeps each time you press the COOL/Mode button.  
The air conditioner starts up in the Cool mode.  
You can change modes at any time.  
3
To adjust the temperature, press the Temperature buttons on the remote  
control or unit one or more times until the desired temperature is displayed.  
The temperature can be set between 18°C and 30°C.  
Result: Each time you press the temperature buttons:  
– The temperature is adjusted by 1°C and displayed on  
the control panel  
– The unit beeps  
The air conditioner starts cooling if the room temperature is  
higher than the selected temperature.  
4
To set the fan speed:  
Press the HIGH, MED or LOW button on the remote control as desired.  
or  
Press the Fan Speed button on the unit one or more times until the  
desired Fan speed indicator lights up.  
5
To control the direction of the air flow, refer to page 10.  
E-8  
Ventilating Your Room  
If the air in your room is stale, you can air the room using the Fan feature.  
1
If you wish to discharge stale air, push the ventilation lever on the front of the  
unit to the right and open position ( ).  
Result: The air inside the room circulates and stale air is discharged  
outside.  
Otherwise, push the ventilation lever to the left and closed position (  
).  
Result: The air simply circulates inside the room.  
Remote Control  
Control Panel  
2
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in the mode selected when  
the unit was last used.  
The unit beeps twice.  
3
If the FAN indicator is not lit on the unit:  
Press the FAN button on the remote control  
or  
Press the Mode button on the unit one or more times until the FAN  
indicator lights up  
Result: The unit beeps each time you press the FAN/Mode button.  
The air conditioner starts up in Fan mode.  
You can change modes at any time.  
When the air conditioner is in the Fan mode, the temperature  
cannot be set or displayed.  
You cannot use Fan mode in the energy saving mode  
4
To set the fan speed:  
Press the HIGH, MED or LOW button on the remote control as desired.  
or  
Press the Fan Speed button on the unit one or more times until the  
desired Fan speed indicator lights up.  
5
To control the direction of the air flow, refer to page 10.  
E-9  
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the unit in your room , you can adjust  
the orientation of the inner air flow blades on the right-hand side of  
the unit, thus increasing the efficiency of the air conditioner.  
Remote Control  
Control Panel  
Press the Swing button on the remote control or unit.  
1
Result: The inner blades swing automatically left and right.  
In the Energy Saving mode, the blades may stop when the  
compressor is off. For details on the Energy Saving mode, refer to  
page 12.  
2
To stop the blades moving left and right, press the Swing button again.  
To stop the blades in a specific position and orient the air flow in  
the corresponding direction, simply press the Swing button when  
the blades are in the desired position.  
Adjusting the Air Flow Direction Vertically  
The outer air flow blades can be adjusted to control the vertical air  
flow direction.  
RECOMMENDATION  
When...  
Adjust the blades to face...  
Cooling  
Upwards.  
Adjust the air flow blades to the desired position, by pushing them upwards or  
downwards.  
If you orient the air flow blades downwards and the unit operates in the Cool  
mode for long periods of time, dew may:  
Form on the surface of the blades  
Drip from the blades  
E-10  
Switching the Unit Off Automatically (Off Timer)  
You can set the tim er to sw itch the air conditioner off autom atically  
at a given tim e.  
Remote Control  
Control Panel  
1
If necessary, press the  
(On/Off) button.  
2
Select the desired mode by pressing the appropriate button:  
COOL or FAN button on the remote control  
or  
Mode button on the unit (press it one or more times until the  
appropriate operating mode indicator lights up)  
3
Set the operating time by pressing the Timer button on the remote control or unit  
one or more times until the desired time is displayed. The operating time can be  
set between 1 and 24 hours.  
Result: Each time you press the Timer button:  
– The time is adjusted by 1 hour and displayed on the control panel  
– The unit beeps  
The h indicator flashes for about ten seconds and the remaining  
time is displayed.  
The operating time is displayed and decreases automatically to  
indicate the remaining time.  
The air conditioner switches off automatically when the operating  
time reaches zero.  
Example : To switch the unit off two hours after you have gone to bed, set the  
operating time to 2 hours.  
To Cancel the Off Timer  
If you no longer w ish to use the Off Tim e that you have set, you can  
cancel it at any tim e.  
To cancel the Timer, press the Timer button on the remote control or unit  
one or more times until "--" is displayed.  
Result: The unit beeps each time you press a button.  
The h indicator on the unit switches off.  
The air conditioner operates normally.  
E-11  
Selecting Energy Saving Mode  
If you w ish to save energy w hen using your air conditioner,  
select the energy saving m ode w ith the Energy Saver button.  
Remote Control  
Control Panel  
To select the energy saving mode, press the Energy Saver button on the  
remote control or unit one or more times until the Energy Saver indicator  
lights up.  
1
Result:  
The fan and compressor cycle on and off together.  
The fan will continue to run for a short time after the  
compressor cycles off.  
If you would like the air conditioner to run in Fan mode, do not press  
the Energy Saver button. You cannot use the Fan mode in the energy  
saving mode.  
2
To stop the energy saving mode, press the Energy Saver button on the  
remote control or unit again.  
Result: The fan runs at all times, while the compressor cycles on and off.  
Power Failure  
If a power failure occurs when the air conditioner is operating, the unit is  
switched off. When the power comes back on, wait five minutes before  
pressing (On/Off) to restart the unit.  
E-12  
Temperature and Humidity Ranges  
The follow ing table indicates the temperature and humidity ranges  
w ithin w hich the air conditioner can be used.  
Mode  
Indoor  
Outdoor  
Indoor Humidity  
Temperature  
Temperature  
Cooling  
21°C to 32°C approx.  
21°C to 43°C approx.  
80% or less  
If the air conditioner is used at...  
Then...  
Higher temperature  
The automatic protection feature may be triggered and the air  
conditioner stopped.  
Lower temperature  
A water leakage or some other malfunction may happen if the  
heat exchanger freezes.  
Higher humidity levels  
Water may condense on and drip from the surface of the unit  
if it is used for long periods.  
E-13  
Cleaning Your Air Conditioner  
Be sure to clean the air filter periodically to m aintain the air conditioner  
in the best condition for a long period of tim e.  
When cleaning the air conditioner, turn it off and pull out  
the pow er plug.  
IMPORTANT  
1
Open the front grille by pulling on the tabs of the unit.  
Note  
The removal of the front grille makes it easier to clean the air  
conditioner. After opening the front grille, lift it up as much as  
possible, then pull down to release it.  
2
3
Grasp the handle on the air filter and lift it slightly and then out to the  
front.  
Front grille  
Remove all dust on the air filter with a vacuum cleaner or brush.  
4
5
When you have finished, insert the air filter back into its original  
position.  
Wipe the surface of the unit with a neutral detergent  
and then wipe it again with dry cloth.  
(Be sure not to use benzene, solvent or other chemical products.)  
Front grille  
Grille groove  
Body guide  
Note  
If you...  
Then...  
Will not be using the  
air conditioner for a  
long period of time  
Set the fan to LOW and let it run for  
a few hours to dry the inside of the  
air conditioner thoroughly.  
Switch the air conditioner off and  
unplug it from the wall socket.  
Clean the filter and outer surfaces.  
Have not used the air  
conditioner for a long  
period of time  
Set the fan to LOW and let it run for a  
few hours to dry the inside of the air  
conditioner thoroughly.  
E-14  
Solving Common Problems  
Before contacting an authorized service center, perform the follow ing sim ple checks.  
They m ay save you the tim e and expense of an unnecessary call.  
Problem  
Explanation / Solution  
Check that the circuit breaker used for the air conditioner has not been  
triggered.  
Check that the power cable is plugged into a wall socket and the socket is  
switched on, if necessary.  
The air conditioner does  
not operate at all  
Check that the temperature indicator on the unit is lit; if necessary,  
press (On/Off) on the remote control or unit.  
Check that there are no obstacles between you and the unit.  
Replace the remote control batteries if necessary.  
Check that you are close enough to the unit (seven metres/yards or less).  
The air conditioner does not  
operate with the remote  
control  
Check that you are pointing the remote control at the remote control sensor  
on the unit.  
Replace the remote control batteries if necessary.  
No beep is heard when you  
press (On/Off) on the  
remote control  
Check that the correct operating mode has been selected(COOL).  
The room temperature may be too low.  
The air conditioner does not  
cool  
Dust may be blocking the air filter; refer to page 14 for cleaning instructions.  
Check that there is no obstacle blocking the air flow into or out of the unit.  
Check that the air conditioner has been switched on; if necessary,  
The air flow direction does  
not change when you press  
the Swing button  
press (On/Off) on the remote control or unit.  
The blades may not move when the air conditioner runs in the energy saving mode.  
Check that the timer has been programmed correctly; refer to page 11.  
The timer is not correctly  
triggered  
Odors are permeating the  
room during air conditioning  
◆◆ Ventilate the room.  
Technical Specifications  
Design and specifications are subject to change without notice.  
Power Supply  
Model  
Cooling Capacity(BTU/h)  
AW0690  
AW0890  
AW1090  
AW1290  
6000  
8000  
115V~, 60Hz  
10000  
12000  
E-15  
YOUR SAMSUNG ROOM AIR CONDITIONER  
WARRANTY  
Limited Warranty to Original Purchaser  
Samsung will repair or replace, at our option, this product if found defective within the warranty  
period beginning from the original date of purchase. This Samsung Product is warranted by  
SAMSUNG ELECTRONICS CANADA Inc. against manufacturing defects in materials or  
workmanship for the period specified.  
Labor  
Parts  
1 Year (In home)  
1 Year  
Limited 5-Years Compressor Warranty  
Within one year of purchase Samsung Electronics Canada Inc. will provide a replacement  
compressor if it is found to be defective in material or workmanship. During the existing four  
years (second through fifth year) Samsung Electronics Canada Inc. will provide a replacement  
only, without charge, if it is found to be defective in material or workmanship. Labor to install  
the compressor during these existing four years is not included in the warranty. All warranty  
repairs must be performed by a Samsung Authorized Service Centre.  
Obligation of the Original Owner  
The original dated purchase receipt must be retained as proof of purchase and presented to  
the Authorized Service Centre before warranty services are rendered.  
Exclusions of the Warranty  
This warranty does not cover damage due to accident, fire, flood and/or other Acts of God:  
misuse, incorrect line voltage, improper installation, improper or unauthorized repairs,  
commercial use, or damages which occur in shipping. Exterior and interior finish and plastic  
parts, are not covered under this warranty, Customer adjustments which are explained in the  
instruction manual are not covered under the terms of this warranty. This warranty will  
automatically be voided for any unit found with a missing or altered serial number.  
This warranty is valid only on products purchased and used in Canada.  
SAMSUNG ELECTRONICS CANADA INC.  
7037 Financial Drive, Mississauga, Ontario L5N 6R3  
Printed in Korea  
ELECTRONICS  

Panasonic Cw C200nu User Manual
Panasonic Ds200 User Manual
Panasonic Kx Tg1843al User Manual
Ricoh Aficio 1515 User Manual
Ricoh Aficio Dsm616 User Manual
Ricoh Ft1208 User Manual
Sanyo Spw K095xh User Manual
Soleus Air Kc 45h User Manual
Trane Air Conditioner Tam7b0c60h51sa User Manual
Universal Power Group 24bc5000tf 1 User Manual