Samsung Avmkc026ea B 0 User Manual

OWNERS INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
MANUEL DUTILISATION  
ISTRUZIONI PER LUSO  
MANUAL DE INSTRUÇÕES  
GEBRAUCHSANWEISUNG  
√¢∏°π∂™ Ã∏™∆∏  
àçëíêìäñàü èéãúáéÇÄíÖãü  
Heat pump  
Cooling only  
AVMKH020CA0(1,2,4)  
AVMKH032CA0(1,2,4)  
AVMKH040CA0(1,2,4)  
AVMKC020CA0(1,2,4)  
AVMKC032CA0(1,2,4)  
AVMKC040CA0(1,2,4)  
AVMKH020EA(B)0(1,2,4) AVMKC020EA(B)0(1,2,4)  
AVMKH026EA(B)0(1,2,4) AVMKC026EA(B)0(1,2,4)  
AVMKH035EA(B)0(1,2,4) AVMKC035EA(B)0(1,2,4)  
System Air Conditioner  
Aire acondicionado sistemático  
Climatiseur numérique multifonctionnel  
Sistema Aria Condizionata  
Sistema Ar Condicionado  
Klimaanlage System  
™‡ÛÙËÌ· ∫ÏÈÌ·ÙÈÛÌÔ‡  
ëËÒÚÂÏÌ˚È ÇÓÁ‰Û¯Ì˚È äÓ̉ˈËÓÌÂ  
E S F I P D G R DB98-05142A(6)  
Safety Precautions  
The follow ing safety precautions m ust be taken w hen using your air conditioner.  
Risk of electric shock. Can cause injury or death. Disconnect all  
WARNING  
remote electric power supplies before servicing, installing or cleaning.  
This must be done by the manufacturer or its service agent or a similar  
qualified person in order to avoid a hazard.  
Users of this product are cautioned not to attempt repair of this product  
DURING OPERATION  
at their own discretion. Instead, they are requested to directly contact a  
designated service center or the outlet at which the product was  
purchased.  
Never spill any kind of liquid into the unit. Should this happen, unplug  
or main switch off the unit and contact an authorized service center.  
Do not insert anything between the air outlet blades because the inner  
fan may be damaged and could cause injury. Keep children away from  
the unit.  
Do not place any obstacles in front of the unit.  
Do not spray liquid of any kind into the indoor unit. Should this happen,  
switch off the breaker used for your air conditioner and contact your  
installation specialist.  
Make sure that the unit is correctly ventilated at all times:  
Do not place clothing or other materials over it.  
If the wireless remote control will not be used for a long time, remove  
the batteries. (If applicable)  
When using a wireless remote control, the distance should not be more  
than 7 meters from the air conditioner. (If applicable)  
Before throwing out the device, it is necessary to pull back the battery  
DISPOSING OF THE UNIT  
cells and get rid of them safely for recycling reasons.  
When you need to dispose of the unit, consult your dealer. If pipes are  
removed incorrectly, refrigerant may blow out and come into contact  
with your skin, causing injury. Releasing refrigerant into the atmosphere  
also damages the environments.  
Please recycle or dispose of the packaging material for this product in  
an environmentally responsible manner.  
Never store or ship the air conditioner upside down or sideways to  
OTHERS  
avoid damage to the compressor.  
The appliance is not intended for use by young children or infirm  
persons without supervision: Young children should be supervised to  
ensure that they do not play with the appliance.  
Max current is measured according to IEC standard for safety and  
current is measured according to ISO standard for energy efficiency.  
E-2  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Wireless Remote Controller-Buttons and Display . . . . . . . . . . . 6  
Wired Remote Controller-Buttons and Display . . . . . . . . . . . . . 7  
Centralized Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Function Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
RECOMMENDATIONS FOR USE  
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . 11  
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . 12  
Bio-Pure Filter Installation (Optional) . . . . . . . . . . . . . . . . . . . . 13  
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
TECHNICAL SPECIFICATIONS  
Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment)  
(Applicable in the European Union and other European countries with separate collection systems)  
This marking shown on the product or its literature, indicates that it should not be disposed with other household  
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled  
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable  
reuse of material resources.  
Household users should contact either the retailer where they purchased this product, or their local government  
office, for details of where and how they can take this item for environmentally safe recycling.  
Business users should contact their supplier and check the terms and conditions of the purchase contract.  
This product should not be mixed with other commercial wastes for disposal.  
E-3  
View of the Unit  
The figures are shown in this instruction may differ from yours depending on the model.  
Indoor Unit  
Air flow blade  
Air inlet  
Timer indicator  
Fan indicator  
Remote control sensor  
- Heat Pump Models :  
On/Off indicator(Green) &  
Removing frost  
Filter sign indicator  
indicator(Red)  
- Cooling Only Models :  
On/Off indicator  
E-4  
Outdoor Unit  
TYPE A  
TYPE B  
Air outlet  
Air outlet  
Connection  
valve  
Connection valve  
Outdoor Unit  
TYPE C  
TYPE D  
Air outlet  
Air outlet  
Connection valve  
Connection  
valve  
Outdoor Unit  
TYPE E  
TYPE F  
Air outlet  
Air outlet  
Connection valve  
Connection valve  
If the heat exchanger in the outdoor unit gets dusty, cooling efficiency may fall. So clean the heat  
exchanger with water when it becomes dirty. However, be careful when you wash the surface of the  
heat exchanger because it is very sharp.  
No t e  
E-5  
Wireless Remote Controller-Buttons and Display  
The wireless remote controller is an optional accessory.  
To use the wireless remote controller, refer to an appropriate manual.  
Mode selection button  
Operating mode  
Temperature adjustment  
buttons  
Temperature setting  
Filter Reset button  
Fan speed  
Fan speed adjustment  
button  
Air flow direction  
Swing button  
On Timer setting  
On Timer button  
Off Timer setting  
Off Timer button  
Battery discharge indicator  
On/Off & Timer  
Set/Cancel button  
No t e  
After cleaning the air filter, press the filter reset button.  
The heating mode( ) is not selected in cooling only models.  
E-6  
Wired Remote Controller-Buttons and Display  
The wired remote controller is an optional accessory and it is installed on the wall.  
To use the wired remote controller, refer to an appropriate manual.  
Operating mode  
Removing frost indicator  
(Except Cooling Only Models)  
Centralized controller indicator  
(In case of installing the Centralized controller)  
Communication error indicator  
Temperature setting  
Fan speed  
On Timer setting  
Off Timer setting  
Air flow direction  
Test indicator  
Filter Sign indicator  
On/Off & Timer  
Set/Cancel button  
Temperature adjustment  
buttons  
On/Off indicator  
On Timer button  
Fan speed adjustment  
button  
Off Timer button  
Swing button  
Test button  
Filter Reset button  
Mode selection button  
No t e  
Test button is for your installation specialist. You must NOT press it.  
After cleaning the air filter, press the filter reset button. Then the wired remote  
controller will display the FILTER SIGN indicator when the time to clean the air filter;  
refer to page 12.  
The heating mode( ) is not selected in cooling only models.  
E-7  
Centralized Controller  
The centralized controller is an optional accessory and it is installed on the wall.  
To use the centralized controller, refer to an appropriate manual.  
Front View  
Operating lamp  
All On button  
All Off button  
On/Off indicators  
On/Off buttons  
Index  
No t e  
The operating lamp comes on even when only one air conditioner  
connected to the centralized controller is operating.  
Side View  
Operating Mode Switch  
COOL  
AUTO  
HEAT  
No t e  
Choose the appropriate operating mode with the Operating Mode Switch  
that enables the user to choose between the Cool/Auto/Heat mode.  
The heating mode( ) is not selected in cooling only models.  
E-8  
Function Controller  
The function controller is an optional accessory and it is installed on the wall.  
The function controller is an additional controller which is used with the centralized controller.  
To use the function controller, refer to an appropriate manual.  
Operating mode  
Removing frost indicator  
Centralized controller indicator  
(Except Cooling Only Models)  
Communication error indicator  
Temperature setting  
Room number display  
Fan speed  
Air flow direction  
Test indicator  
Filter Sign indicator  
On/Off & Timer  
Set/Cancel button  
Temperature adjustment  
buttons  
On/Off indicator  
Fan speed adjustment  
button  
Indoor unit selection button  
Swing button  
Test button  
Filter Reset button  
Mode selection button  
No t e  
Test button is for your installation specialist. You must NOT press it.  
After cleaning the air filter, press the filter reset button. Then the wired remote controller  
will display the FILTER SIGN indicator when the time to clean the air filter.  
The heating mode( ) is not selected in cooling only models.  
E-9  
Operating Recommendations  
Here are a few recommendations that you should follow w hen operating  
your air conditioner.  
Topic  
Recommendation  
The heat pump function of the air conditioner absorbs heat  
Heating  
performances from outside air and brings it indoors. As the temperature of the  
outside air drops, the heating performance of air conditioner will  
decrease. If you find that the room is not warm enough, using  
an additional heating appliance is recommended.  
Frost  
When outside temperature is low but humidity is high,  
frost may form on the outdoor unit at HEAT mode.  
If this happens:  
The heating operation stops.  
The defrost mode will be triggered automatically for about  
10 minutes.  
No intervention is required ; after about 10 minutes, the air  
conditioner operates again normally.  
High indoor  
and outdoor  
If both indoor and outdoor temperatures are high and the air  
conditioner is running at HEAT mode, the outdoor unit’s fan  
temperatures and compressor may stop at times.  
This is normal ; simply wait until the air conditioner switches  
on again.  
Power failure  
If a power failure occurs while the air conditioner is operating,  
the unit will be switched off. When the power returns, the air  
conditioner starts up again automatically.  
E-10  
Temperature and Humidity Ranges  
The follow ing table indicates the temperature and humidity ranges,  
w ithin w hich the air conditioner can be used.  
If the air conditioner is used at...  
Then...  
High temperature  
The automatic protection feature may be  
triggered and the air conditioner stopped.  
Low temperature  
A water leakage or some other  
malfunction may happen if the heat  
exchanger freezes.  
High humidity levels  
Water may condense on and drip from  
the surface of the indoor unit if it is used  
for a long periods.  
Mode  
Heating  
Cooling  
Drying  
Outdoor Temperature  
-15°C to 24°C approx.  
-5°C to 43°C approx.  
-5°C to 43°C approx.  
Indoor Temperature  
27°C or less  
Indoor Humidity  
-
21°C to 32°C approx.  
21°C to 32°C approx.  
80% or less  
-
◆◆ The standardized temperature for heating is 7°C. If the outdoor  
temperature drops to 0°C or below, the heating capacity can be  
reduced depending on the temperature condition.  
If the cooling operation is used at over 32°C(indoor temperature),  
it does not cool at its full capacity.  
E-11  
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner, you must clean  
it regularly to remove the dust that accumulates on the air filter.  
Before cleaning your air conditioner, ensure that you have  
switched off the electric circuit breaker used for the unit.  
IMPORTANT  
Open the front grille by pushing the tabs on the grille.  
1
You must give attention when disassembling the front grille  
and must check the safety clips have been installed.  
If you do not check them, the front grille will drop suddenly  
and you will be hurt.  
IMPORTANT  
Remove the front grille.  
2
2-1 Remove the safety clips.  
2-2 Open the front grille about 45° and pull it forward.  
Pull out the air filter.  
3
4
Remove all dust on air filter with a vacuum cleaner or a brush. In case of  
serious dust accumulation, put the air filter in warm detergent water and  
shake it vertically.  
Dry the air filter.  
5
6
When you have finished, insert the filter into the front grille.  
Clean the unit with a vacuum cleaner or a brush once a month.  
Reinstall the front grille and the safety clips.  
7
8
No t e  
After cleaning the air conditioner, press the Filter Reset button.  
Wired Remote Controller  
Wireless Remote Controller  
E-12  
Bio-Pure Filter Installation (Optional)  
The air conditioner can be fitted with a Bio-Pure or deodorizing filter to remove  
minute dust particles or odours. The service life of the filter is approximately  
three months depending on the time during which the air conditioner is used.  
Remove the vinyl packing from the filter.  
1
Bio-pure filter  
No t e  
Do not remove the packing from a bio-pure filter until you wish  
to use the filter, as it will lose its properties.  
Open the front grille by pulling the tabs on the grille.  
2
3
Deodorizing filter  
Remove the front grille.  
3-1 Remove the safety clips.  
3-2 Open the front grille about 45° and pull it forward.  
Insert Bio-Pure or deodorizing filter.  
4
5
Reinstall the front grille and the safety clips.  
E-13  
Solving Common Problems  
Before contacting the after-sales service, perform the follow ing simple checks.  
They may save your time and expense of an unnecessary call.  
Problem  
Explanation/Solution  
The air conditioner does not Check that the breaker used for the air conditioner is switched on.  
operate at all  
Wired Remote Controller  
The air conditioner does not  
operate with the remote  
controller  
is displayed on the wired remote controller. In this case,  
turn the air conditioner off and contact your dealer.  
Wired Remote Controller  
When turning on/off the  
air conditioner, it is not  
In case of using the wired remote controller for a group, the air  
conditioners connected to the remote controller are turned on/off in  
order. Thus, it takes some time(up to 32 seconds).  
turned on/off immediately.  
Wireless Remote Controller  
The air conditioner does not Check that there are no obstacles between you and the remote  
operate with the remote  
controller  
control sensor.  
Check the wireless remote controller batteries.  
Check that you are close enough to the remote control sensor.  
(7 metres/yards or less).  
Wireless Remote Controller  
No beep is heard when you Check that you are pointing the remote controller at the remote  
press  
(ON/OFF) on the  
control sensor on the indoor unit.  
remote controller  
Replace the remote controller batteries if necessary.  
If there is a strong light around the air conditioner, a  
three-wavelength light, a neon sign, etc., for example,  
the air conditioner may not be operated with a remote controller.  
If this happens, use the remote controller close by the remote  
control sensor.  
The air conditioner does  
not cool or heat  
Check that the correct operating mode has been selected.  
The room temperature may be too low or too high.  
Dust may be blocking the air filter guard; refer to page 12  
for cleaning instructions.  
Check that there is no obstacle in front of the outdoor unit.  
When heating, the required Check that the required temperature has been set correctly.  
room temperature is never  
reached and the air  
Increase the fan speed.  
conditioner frequently stops  
E-14  
Technical Specifications  
Model  
Power Supply  
AVMKH020CA0(1,2,4)  
AVMKH032CA0(1,2,4)  
AVMKH040CA0(1,2,4)  
1Ø, 208-230V~, 60Hz  
AVMKC020CA0(1,2,4)  
AVMKC032CA0(1,2,4)  
AVMKC040CA0(1,2,4)  
AVMKH020EA(B)0(1,2,4)  
AVMKH026EA(B)0(1,2,4)  
AVMKH035EA(B)0(1,2,4)  
1Ø, 220-240V~, 50Hz  
AVMKC020EA(B)0(1,2,4)  
AVMKC026EA(B)0(1,2,4)  
AVMKC035EA(B)0(1,2,4)  
E-15  

Millennium Enterprises Millennium Style A User Manual
Panasonic Kx Pw32cl User Manual
Philips Sc484 User Manual
Philips Ss951p User Manual
Ricoh Aficio Dsm620d User Manual
Samsung Ad24b1 B2 C1 C2 E12 User Manual
Sanyo Twicell Hf E5u User Manual
Sanyo Ur18650h User Manual
Sharp True Hepa Replacement Filter Fzc150hfu User Manual
Trion T2002 User Manual