User’s Guide
MBP20
Baby Monitor
The features described in this user's
guide are subject to modifications
without prior notice.
Overview of your Parent unit
3
4
UP / Volume +
In idle mode: Press to increase the speaker volume.
In menu mode: Press to view the previous menu
item.
Menu / OK
In idle mode: Press to access the main menu.
In menu mode: Press to access the sub-menu, or
confirm the settings.
1
5
6
7
DOWN / Volume -
In idle mode: Press to decrease the speaker volume.
In menu mode: Press to view the next menu item.
Talk
In idle or menu mode: Press and hold to talk back
with baby unit. Release to quit the talk mode.
9
8
2
3
Video On / Off
4
In monitoring mode: Press to deactivate/activate the
video feed or turn on/off the LCD display.
In menu mode: Press to go to the monitoring mode.
5
6
7
8
Power / Back
In idle or menu mode: Press and hold to power on/off
the parent unit.
In menu mode: Press to cancel settings and back to
the previous level.
1
2
LCD Display
Link Indicator
On when the parent unit is powered on and linked to
the baby unit.
Flashes when the parent unit is out of range from
baby unit.
Off when the parent unit is powered off.
9
Charging Indicator
Indicates when speaker of parent unit is muted.
Indicates the speaker volume level of parent unit.
On steadily when in charging mode.
Flashes when low battery is detected.
NOTE
Indicates when parent unit or baby unit is playing
lullaby.
Off even if connected with power adapter but without
battery pack installed.
Indicates when timer alarm is activated.
Indicates when the sound alert is set on.
Low battery, needs charging.
Parent Unit Display
1/2 battery level. More internal bars mean high
battery level.
Icons
Behaviors Description
Indicates the signal strength between baby
unit and parent unit. The more blocks, the
stronger connection signal.
Full battery level.
Animation in cycle. Battery is in
charging.
Flashes when parent unit is out of range.
Indicates no connection between the baby unit
and parent unit.
Menu Structure of Parent Unit
MAIN MENU
LANGUAGE
TIMER
BRIGHTNESS
SOUND ALERT
ALERT TONES
Low Battery
No Link
RESET
SUB MENU
English
Français
Español
Activation
Set Timer
Level 1 ~ 5
On
Off
Deutsch
Italiano
Português
Overview of your Baby unit
1
2
3
Infrared Light
Camera
Power Indicator
On when the baby unit is switched on.
Off when the baby unit is switched off.
4
5
6
7
8
9
UP / Volume +
Press to increase the speaker volume.
1
2
Power
Press and hold to power on/off the baby unit.
DOWN / Volume -
Press to decrease the speaker volume.
Stop
Press to stop the lullaby playing.
Play
3
5
Press to play the lullaby.
4
6
Lullaby
9
8
Press to select the lullaby and start playing the
selected lullaby.
During lullaby playing, press to select and play the
other lullabies.
7
Important guidelines for installing our Baby Monitor
•
•
•
•
To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range
will be affected by environmental conditions.
Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic doors or reinforced concrete, between
the baby and parent unit may block the radio signal.
The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such
as TV's, computers, cordless or mobile phones, fluorescent lights or dimmer switches.
If the signal is poor, try moving the parent and/or the baby unit to different positions in the rooms.
1. SAFETY INSTRUCTIONS ................................... 8
2. GETTING STARTED............................................ 9
2.1 Baby unit power supply.......................................9
2.2 Parent unit battery installation.............................9
2.3 Belt clip on parent unit ......................................10
3. USING YOUR BABY MONITOR........................ 11
3.1 Power on/off the parent unit..............................11
3.2 Power on/off the baby unit ................................11
3.3 Adjust speaker volume of parent unit and
baby unit ...........................................................11
3.4 Talk Back ..........................................................11
3.4.1 Adjust talk back volume .........................12
3.5 Temperature .....................................................12
3.6 Lullaby...............................................................12
3.7 Monitoring management for multi-parent
system...............................................................12
4. Parent unit settings.......................................... 13
4.1 Set the language...............................................13
4.2 Timer.................................................................13
4.2.1 Turn on the timer ...................................13
4.2.2 Set the timer ..........................................14
4.3 Set the brightness.............................................14
4.4 Sound alert........................................................14
4.5 Alert tones.........................................................14
4.6 Reset.................................................................15
7
• This product is not a toy. Don't allow children to play
with it.
1. SAFETY INSTRUCTIONS
• This baby monitor is not a substitute for responsible
adult supervision.
• Keep this User's Guide for future reference.
• Do not cover the baby monitor with a towel or blanket.
• Never use extension cords with power adapters. Only
use the power adapters provided.
WARNING:
STRANGULATION HAZARD - Keep the adapter cord
out of baby's reach.
NEVER place the baby monitor or its cord within the cot.
Secure the cord some distance away from baby's reach.
Never use extension cords with AC Adapters. Only use
the AC Adapters provided.
• Test this monitor and all its functions so that you are
familiar with it prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
• Only use the chargers and power adapters provided. Do
not use other chargers or power adapters as this may
damage the device and battery pack.
CAMERA SET UP & USE:
• Determine a location for the CAMERA that will provide
the best view of your baby in his cot.
• Place the CAMERA on a flat surface, such as a dresser,
bureau, or shelf.
• Only insert battery pack of the same type.
• Do not touch the plug contacts with sharp or metal
objects.
• NEVER place camera or cords within cot.
• Secure the cord to the wall to keep cord away from the
baby’s reach.
This baby monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as
described in the User's Guide, safe to use. Therefore,
always read the instructions in this User's Guide carefully
before using the device.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Use only battery pack with rating: 2.4V 600mAh.
• Adult assembly is required. Keep small parts away from
children when assembling.
8
SAFETY INSTRUCTIONS
2.2 Parent unit battery installation
The parent unit comes with a battery pack. Charge the
parent unit before you use it for the first time or when the
parent unit indicates that the battery is low.
2. GETTING STARTED
2.1 Baby unit power supply
DC JACK
DC PLUG
Battery JACK
Battery PLUG
1. Insert the power adapter with smaller pin plug into the
side of the baby unit, as shown.
2. Connect the other end of the power adapter to the
power outlet.
1. Take off the belt clip.
NOTE
2. Slide off the battery compartment cover.
Only use the provided power adapter.
GETTING STARTED
9
3. Insert the supplied battery pack, and fit the battery
2.3 Belt clip on parent unit
pack into the compartment.
4. Reattach the battery compartment cover, and reinstall
the belt clip (refer to section 2.3).
5. Insert the power adapter with bigger pin plug into the
side of the parent unit.
6. Connect the other end of the power adapter to the
power outlet.
7. The Charging Indicator comes on.
NOTE
1. Attach the belt clip to the lock slots on the back sides.
Only use the provided power adapter.
2. The accessory comes with the unit at belt clip mode.
3. You can convert into stand mode by lifting up the belt
clip and rotating by half turn.
10
GETTING STARTED
3.3 Adjust speaker volume of parent unit
and baby unit
There are 5 volume levels on the baby unit, and 6 levels on the
parent unit, including VOLUME OFF. The volume level of parent unit
will be shown on the status bar when you adjust the volume.
3. USING YOUR BABY MONITOR
Please read these instructions carefully, and be reminded
that this baby monitor is just intended as an aid. It is not a
substitute for responsible, correct parental supervision.
3.1 Power on/off the parent unit
1. Press + or - on the parent unit or > or < on
baby unit to access the current volume level.
1. Provided the parent unit is off, press and hold 3 until
the Link Indicator is on. The parent unit is now
powered on and the parent unit will search for and link
itself to the baby unit.
2. Press +/> to increase or -/< to decrease the
volume of the parent unit or baby unit respectively.
The
will be displayed if the volume is turn off on
parent unit.
2. Provided the parent unit is on, press and hold 3 until
the Link Indicator is off. The parent unit is now
powered off.
An audible alert will emit when you reach the highest or
lowest volume level.
Changing the volume setting on the baby unit affects the
volume when you use the Talk Back feature or when
playing a lullaby.
3.2 Power on/off the baby unit
1. Provided the baby unit is off, press and hold 0 until the
Power Indicator is on. The baby unit is now powered on.
3.4 Talk Back
2. Provided the baby unit is on, press and hold 0 until the
You can use the Talk Back feature to comfort and reassure
your baby.
Power Indicator is off. The baby unit is now powered off.
NOTE
Whilst using Talk Back you will not be able to hear your
baby until you release the button.
If you place the parent and baby units too close together,
you will hear a high pitched noise, this is normal. The units
are designed to be located at a distance from one another,
e.g. in separate rooms.
1. Press and hold 7 on the parent unit to speak to baby.
The
will be displayed on the status bar of parent unit.
2. Release to hear your baby again.
USING YOUR BABY MONITOR
11
3.4.1 Adjust talk back volume
3.6 Lullaby
The baby unit has 5 volume levels from Level 1 to Level 5.
There are 3 lullabies available for playing to soothe your
baby to sleep.
During Talk Back, press > or < on the baby unit to
increase or decrease the volume respectively.
1. Press 2 on the baby unit key to select the lullaby
and start playing.
NOTE
The lullaby will stop playing back when talk back is
activated.
2. During playback, press 2 to toggle between different
lullabies.
OR
3.5 Temperature
Press 8 on the baby unit to start playing the selected
The baby unit constantly monitors the temperature in your
baby's room and alerts you if it gets lower than 14ºC (or
57ºF), screen of parent unit will show the alert message
"Too cold!", or when higher than 39ºC (or 102ºF), will show
"Too hot!". Please check your baby immediately when such
alert message is triggered.
lullaby. Press 9 to stop playing.
3.7 Monitoring management for multi-
parent system
The system allows pairing up to two parent units to a baby
unit. However, only one parent unit can receive video
image at a time. You can switch the video feed between
these two parent units.
The first powered up parent unit will connect to the baby
unit automatically, and the next powered up parent unit will
turn up on screen ANOTHER PU IS VIDEO MONITORING! for around 30
seconds and then goes blank. Press once the 6 to turn
off the screen.
12
USING YOUR BABY MONITOR
NOTE
4. Parent unit settings
4.1 Set the language
The parent unit still carries on audio monitoring even if the
video capture is turned off.
1. Press 1 to access main menu.
To switch the video feed from the current monitoring parent
unit to the other parent unit which is not in video monitoring
mode:
2. Press + or - to select
LANGUAGE.
3. Press 1 to enter the sub-menu.
1. Press 6 on the current video monitoring parent unit,
4. Press + or - to select the desired language.
the screen will be blank without video image received.
5. Press 1 to confirm.
2. Press 6 on the other parent unit which is NOT in
video monitoring mode, the video feed will be
transferred to that parent unit.
4.2 Timer
The timer function serves as an alarm reminding you
things-to-do for the baby such as typically milk feeding,
checking up appointment and medication.
4.2.1 Turn on the timer
1. Press 1 to access main menu.
2. Press + or - to select
3. Press 1 to enter the sub-menu.
4. Press + or - to select
5. Press 1 and then + or - to select ON or OFF
6. If you select ON, your will be prompted to select the
TIMER.
ACTIVATION
.
.
alarm frequency from ONCE or REPEATED
.
7. Press 1 to confirm.
Parent unit settings
13
4.2.2 Set the timer
1. Repeat steps 1 to 3 in section 4.2.1.
4.4 Sound alert
When the sound alert is set ON, the baby unit monitors
continuously and the sound* can be heard on the parent
unit even its speaker volume is off.
2. Press + or - to select
SET TIMER.
3. Press 1 and then set the hour and minute
1. Press 1 to access main menu.
continuously.
2. Press + or - to select
SOUND ALERT.
4. Press 1 to confirm.
NOTE
Once the time reaches, the unit will emit alert beep and
show 00:00 counter on the screen. You can press any
button to stop the beep.
3. Press 1 to enter the sub-menu.
4. Press + or - to turn on or off the sound alert.
5. Press 1 to confirm.
* The sound is audible only if the sound level at baby side
reaches preset typical sensitivity level.
4.3 Set the brightness
1. Press 1 to access main menu.
2. Press + or - to select
4.5 Alert tones
BRIGHTNESS
.
If you turn on the alert tone, when the respective event
happens, an alert screen will be displayed on the parent
unit with an alert tone emitted simultaneously.
3. Press 1 to enter the sub-menu to set the brightness
level.
1. Press 1 to access main menu.
2. Press + or - to select
4. Press + or - to select from LEVEL 1 to LEVEL 5. You can
preview the brightness when scrolling the menu list.
ALERT TONES.
5. Press 1 to confirm.
NOTE
Lower brightness level can help to save the power.
3. Press 1 and + or - to select LOW BATTERY or NO LINK
.
4. Press 1 and + or - to turn on or off the alert tone.
5. Press 1 to confirm.
14
Parent unit settings
4.6 Reset
You can restore all the adjustable settings back to their
original factory settings.
5. DISPOSAL OF THE DEVICE
(ENVIRONMENT)
At the end of the product lifecycle, you should
not dispose of this product with normal
household waste. Take this product to a
collection point for the recycling of electrical
and electronic equipment. The symbol on the
product, user's guide and/or box indicates this.
1. Press 1 to access main menu.
2. Press + or - to select
RESET.
3. Press 1 and display will show CONFIRM?
.
4. Press 1 to confirm. The unit will be reset and then
back to idle state.
Some of the product materials can be re-used if you take
them to a recycling point. By reusing some parts or raw
materials from used products you make an important
contribution to the protection of the environment.
Please contact your local authorities in case you need
more information on the collection points in your area.
Dispose of the battery pack in an environmentally-friendly
manner according to your local regulations.
DISPOSAL OF THE DEVICE (ENVIRONMENT)
15
6. CLEANING
7. TROUBLESHOOTING
Clean MBP20 with a slightly damp cloth or with an anti-
static cloth. Never use cleaning agents or abrasive
solvents.
Link light on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly
installed and that they are not drained.
• Recharge the parent unit by connecting it to the power
supply.
Cleaning and care
• Do not clean any part of the product with thinners or
other solvents and chemicals - this may cause
permanent damage to the product which is not covered
by the warranty.
• Keep your MBP20 away from hot, humid areas or
strong sunlight, and do not let it get wet.
• Every effort has been made to ensure high standards of
reliability for your MBP20. However, if something does
go wrong, please do not try to repair it yourself - contact
Customer Service for assistance.
Link light on the parent unit flashes
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
• The baby unit may be switched off. Press and hold 0
key to switch on the baby unit.
Low battery light or
flashes
on the parent unit screen
• Battery pack in the parent unit is running low. Connect
the parent unit to the mains power with the supplied
power adaptor for recharging.
The parent unit beeps
• Lost connection with the baby unit. Reduce the distance
between the parent unit and the baby unit, but not
closer than 5 feet.
• The baby unit may be switched off. Press and hold 0
key to switch on the baby unit.
16
CLEANING
• Battery pack in parent unit may be running low. Connect
the parent unit to the mains power with the supplied
power adaptor for recharging.
The baby monitor system produces a high-pitched
noise
• The parent unit and the baby unit are too close to each
other. Make sure the parent unit and baby unit is at least
5 feet away from each other.
• The speaker volume of the parent unit maybe set too
high. Decrease the volume of the parent unit.
Cannot view the video image of baby from the
parent unit
• Video feed maybe turned off. Activate the video feed by
pressing 6.
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
Battery pack in the parent unit is running low
quickly
• The volume level of the parent unit may be set too high
which consumes power. Decrease the volume level of
the parent unit. Refer to section 3.3 for volume level
settings.
• Battery pack in parent unit may be drained. Connect the
parent unit to the mains power with the supplied power
adaptor for recharging.
Talk back feature is not working
Cannot hear sound or baby cry from the parent unit
• Make sure baby unit is powered on, and link between
• The volume level in the parent unit may be set too low,
parent unit and baby unit is normal.
• Check that the volume is loud enough at the baby unit,
refer to section 3.4.
increase the volume level of the parent unit. Refer to
section 3.3 for volume level settings.
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
TROUBLESHOOTING
17
What will BINATONE do?
8. GENERAL INFORMATION
If your product is not working properly...
1. Read this User's Guide.
BINATONE or its authorized distributor at its option and
within a commercially reasonable time, will at no charge
repair or replace any Products or Accessories that does not
conform to this Warranty. We may use functionally
equivalent reconditioned/ refurbished/ pre-owned or new
Products, Accessories or parts.
3. Contact Customer Service at
UK
ROI
0845 218 0890
08187 62092
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
To order a replacement battery pack for parent unit,
contact customer service.
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR
OR REPLACEMENT PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO
EVENT SHALL MOTOROLA OR BINATONE BE LIABLE,
WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT OR ACCESSORY,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS
OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS
OF INFORMATION OR OTHER FINANCIAL LOSS
ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR
Consumer Products and Accessories
Limited Warranty ("Warranty")
Thank you for purchasing this Motorola branded product
manufactured under license by Binatone Electronics
International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE
warrants that this Motorola branded product ("Product") or
certified accessory ("Accessory") sold for use with this
product that it manufactured to be free from defects in
materials and workmanship under normal consumer usage
for the period outlined below. This Warranty is your
exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer
purchaser, and is not transferable.
18
GENERAL INFORMATION
ACCESSORIES TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are
excluded from coverage.
Some jurisdictions do not allow the limitation or exclusion
of incidental or consequential damages, or limitation on the
length of an implied warranty, so the above limitations or
exclusions may not apply to you. This Warranty gives you
specific legal rights, and you may also have other rights
that vary from one jurisdiction to another.
Batteries. Only batteries whose fully charged capacity falls
below 80% of their rated capacity and batteries that leak
are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.)
to the surface of the product resulting from misuse; (b)
contact with liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or food; (c)
use of the Products or Accessories for commercial
purposes or subjecting the Product or Accessory to
abnormal usage or conditions; or (d) other acts which are
not the fault of MOTOROLA or BINATONE, are excluded
from coverage.
Products Covered Length of Coverage
Consumer
Products
One (1) year from the date of the
products original purchase by the first
consumer purchaser of the product.
Consumer
Accessories
Ninety (90) days from the date of the
accessories original purchase by the
first consumer purchaser of the
product.
Consumer
The balance of the original
Products and
warranty or for ninety (90) days
Use of Non-Motorola branded Products and
Accessories. Defects or damage that result from the use
of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded
from coverage.
Accessories that from the date returned to the
are Repaired or
Replaced
consumer, whichever is longer.
GENERAL INFORMATION
19
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, or modification in any
way by someone other than MOTOROLA, BINATONE or
its authorized service centers, are excluded from coverage.
To obtain service, you must include: (a) the Product or
Accessory; (b) the original proof of purchase (receipt)
which includes the date, place and seller of the Product; (c)
if a warranty card was included in your box, a completed
warranty card showing the serial number of the Product; (d)
a written description of the problem; and, most importantly;
(e) your address and telephone number.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or
parts, are excluded from coverage.
These terms and conditions constitute the complete
warranty agreement between you and BINATONE
regarding the Products or Accessories purchased by you,
and supersede any prior agreement or representations,
including representations made in any literature
publications or promotional materials issued by
BINATONE or representations made by any agent
employee or staff of BINATONE, that may have been made
in connection with the said purchase.
Communication Services. Defects, damages, or the
failure of Products or Accessories due to any
communication service or signal you may subscribe to or
use with the Products or Accessories is excluded from
coverage.
How to Obtain Warranty Service or Other
Information?
To obtain service or information, please call:
UK
0845 218 0890
08187 62092
ROI
You will receive instructions on how to ship the Products or
Accessories at your expense and risk, to a BINATONE
Authorized Repair Center.
20
GENERAL INFORMATION
Parent Unit :
Frequency
Channels
9. TECHNICAL SPECIFICATIONS
Baby Unit:
1881.792 MHz - 1897.344 MHz
10
Frequency
Channels
1881.792 MHz - 1897.344 MHz
Operating
temperature
5oC - 45oC
10
Operating
5oC - 45oC
Display
1.5" CSTN LCD
65K colour LCD
5 steps
temperature
Display colour
Brightness control
Parent unit voltage
Image sensor
Lens
Colour CMOS 30M Pixels
f 3.6mm, F 2.4
4 pcs
2.4V 600mAh Ni-MH battery pack
<BYD H-AAA600Bx2-LE23; GPI
VTRHC063N011>
IR LED
Baby unit voltage
(Adapter rating)
Input 100-240VAC 50/60Hz 150mA;
Output 6VDC @600mA
< Tenpao S004LV0600060 /
S004LB0600060 EU / UK>
Parent unit voltage
(Adapter rating)
Input 100-240VAC 50/60Hz 150mA;
Output 6VDC @600mA
<Tenpao S004LV0600060 /
S004LB0600060 EU / UK>
TECHNICAL SPECIFICATIONS
21
BINATONE TELECOM PLC
1 Apsley Way London NW2 7HF,United Kingdom.
Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877
e-mail: [email protected]
________________________________________
.
EC Declaration of Conformity
The product is labelled with the European Approval Marking CE as
show. Any Unauthorized modification of the product voids this
Declaration.
We the manufacturer / Importer : Binatone Telecom Plc
1 Apsley Way London
NW2 7HF, United Kingdom.
Declare under our sole responsibility that the following product
Type of equipment:
Model Name:
Country of Origin:
Brand:
Digital Baby Monitor
MBP 20
China
Manufacturer / Importer
(Signature of authorized person)
Motorola
complies with the essential protection requirements of R&TTE
Directive 1999/5/EC on the approximation of the laws of the Member
States relating to Radio Spectrum Matters, the Council Directive
2004/108/EC on the approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC) and the European
Community Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements
relating to the essential requirements according to Article 3 R&TTE
was based on Annex III of the Directive 1999/5/EC and the following
standard:
London, 10 Jun 11
Signature: (Paul Tsui/ Product Operation
Director)
Place & Date :
Radio Spectrum:
EMC:
EN301406 V2.1.1 (2009-07)
EN301489-6 V1.3.1 (2008-08)
EN301489-1 V1.8.1 (2008-04)
Electrical Safety:
EN60950-1:2006+A11:2009+A1:2010
22
EC DECLARATION OF CONFORMITY
Manufactured, distributed or sold by Binatone
Electronics International LTD., official licensee
for this product. MOTOROLA and the Stylized
M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other
trademarks are the property of their respective
owners.
© 2011 Motorola Mobility, Inc. All rights
reserved.
Version 1.0
Printed in China
|