Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRODUCT SAFETY
INSTRUCTIONS
Follow and obey all warnings and instructions marked on your product. For your safety, please
read all the safety and operating instructions before you operate this product. Keep this user’s
manual for future reference.
Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in fire or electronic shock.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention to cords near plugs, convenience receptacles,
and the point where they exit from the product.
Ventilation
Slots and openings on the cabinet are provided for ventilation purposes.
To ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered.
• Do not block the openings by placing the product on a bed, sofa, rug or other similar
surface.
• Do not place the product in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instruction have been adhered to.
Other Notices
Avoid exposing the LCD display to direct sunlight or high temperatures.
Avoid exposing the LCD display to moisture or high humidity.
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by anyone
not authorized by manufacturer.
If your LCD Display will not be used for a long period of time, unplug and remove the batteries from the
remote control.
Precautions
Sit at least 20” away from your LCD display.
Avoid touching the screen. Skin oils are difficult to remove.
Never remove the rear cover. Your LCD display contains high-voltage parts. You may be
seriously injured if you touch them.
• Avoid exposing your LCD display to direct sunlight or another heat source. Orient your
LCD display away from direct sunlight to reduce glare.
• Always handle your LCD display with care when moving it.
• Place your LCD display in a well-ventilated area. Do not place anything on your LCD
display that prevents heat dissipation.
• Ensure that the area around the LCD display is clean and free of moisture.
• Do not place heavy objects on the LCD display, video cable, or power cord.
• If smoke, abnormal noise, or strange odor is present, immediately switch the LCD
display off and call your dealer or manufacturer. It is dangerous to continue using the
LCD display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
IMPORTANT PRODUCT SAFETY INSTRUCTIONS....................................................................2
ANTENNA INSTALLATION SAFETY .......................................................................................................3
CLEANING THE LCD DISPLAY.............................................................................................................3
SAFETY GUIDELINES ...........................................................................................................................4
FCC COMPLIANCE STATEMENT...........................................................................................................4
INSTALLATION.................................................................................................................................5
1. INSERT REMOTE CONTROL BATTERIES.............................................................................................5
2. REAR COVERS.................................................................................................................................5
3. CONNECT ANTENNA, CABLE, VIDEO, S-VIDEO, AND/OR YPBPR CABLES .........................................6
4. CONNECT POWER CABLES................................................................................................................7
5. TURN POWER ON ............................................................................................................................7
6. PROGRAMMING CHANNELS..............................................................................................................8
CONTROLS & CONNECTIONS.......................................................................................................9
FRONT VIEW OF THE PRODUCT ............................................................................................................9
REAR VIEW OF THE PRODUCT............................................................................................................10
REMOTE CONTROL............................................................................................................................11
OSD FUNCTIONS.............................................................................................................................12
SOURCE INPUT: TV OR AV OR S-VIDEO............................................................................................13
Main Picture Menu ......................................................................................................................13
Multi Screen Menu.......................................................................................................................13
OSD Menu ...................................................................................................................................15
TV Menu ......................................................................................................................................16
Audio Menu..................................................................................................................................16
Parental Control Menu ................................................................................................................17
Password Edit Menu ..........................................................................................................................17
TV Rating Menu.........................................................................................................................18
MOVIE Rating Menu.................................................................................................................18
SOURCE INPUT: COMPONENT.............................................................................................................19
Main Picture Menu ......................................................................................................................19
APPENDIX ........................................................................................................................................20
SPECIFICATIONS ................................................................................................................................20
TROUBLESHOOTING...........................................................................................................................21
No power .....................................................................................................................................21
Power is ON but no screen image.................................................................................................21
Wrong or abnormal colors ...........................................................................................................21
Snow appears on screen...............................................................................................................21
No sound......................................................................................................................................21
Remote control does not work ......................................................................................................21
Remote control code not found in “universal” remote..................................................................21
How do I mount the LCD TV on a wall.........................................................................................21
How do I find more help?.............................................................................................................21
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Installation Safety
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product, be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and power-line surges. Do not disconnect the
antenna or the power cord during a heavy storm – lightning may strike while you are holding the cable
cord, causing serious injury. Turn off your LCD display and wait for the weather to improve.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as contact with them may be fatal.
Cleaning the LCD Display
•
•
MAKE SURE THE LCD DISPLAY IS TURNED OFF
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a
clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
Manufacturer does not recommend the use of any ammonia or alcohol-based cleaners on the LCD
display screen or case. Some chemical cleaners have been reported to damage the screen and/or
LCD display case. Manufacturer will not be liable for damage resulting from use of any ammonia or
alcohol-based cleaners.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Guidelines
Warning: This device must be operated with the original power supply, part number: ADP-60CF A.
CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for
the individual country. Some examples are listed below:
USA.................UL
Canada.............CSA
Germany..........VDE
Switzerland ..... SEV
Britain ............. BASE/BS
Japan ............... Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination
and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original
cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):
Figure A1
Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.
For units that are mounted on a desk or table, type SVT or SJT cord sets may be used. For units that sit on the
floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your
unit. Please consult the table below for the selection criteria for power cords used in the United States and
Canada.
Cord Type
Size of Conductors in Cord Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
SVT
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and may cause harmful interference to radio
communications if not installed and used in accordance with the instructions. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the provided shielded
video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC (5)
cable. Also, any unauthorized changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Congratulations on your purchase of a Westinghouse 20” LCD TV display. Relax as you, your
friends and family will soon be enjoying movies, broadcasts, and/or popular games on this
wonderful direct-view liquid crystal display.
Package Contents
Your LCD TV package includes:
•
•
•
LCD TV Display
Remote Control (2 AAA batteries are included)
Cables
o
o
Power Cord
Antenna Cable
•
Literature
o
o
o
Quick Install Instructions
User’s Manual
Warranty Card
Important
Save the original box and all packing material for future shipping needs.
1. Insert Remote Control Batteries
• Remove the battery cover.
• Insert the batteries, paying careful attention to match the corresponding (+) and (_)
markings on the battery compartment.
• Re-attach the battery cover.
CAUTION
•
Only use the specified AAA batteries.
•
Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk
or lead to personal injury.
•
Insert batteries according to (+) and (_) markings. Inserting the batteries incorrectly may result in
cracking or leakage, which may pose a fire risk or lead to personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
•
•
•
When the remote control will not to be used for an extended period, remove the batteries.
2. Rear Covers
•
•
Remove the two plastic covers on the rear of the TV before attaching cables.
Replace the covers as desired.
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect Antenna, Cable, Video, S-Video, and/or YPbPr Cables
Connect video and audio cables from compatible devices to the back panel of the LCD TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect power cables
Connect the power cord to the LCD TV and then to a properly grounded AC outlet.
5. Turn Power On
Press the power button on the top of the LCD TV display. Or press the power button on the
remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Programming Channels
1. Select TV as the input using the
TV button (17) on the remote.
2. Push TV/CATV button (14) to
select the type of antenna or
cable system attached to the TV.
3. Push CH. SCAN (6) to
automatically search and
remember channels. Push
ENTER (10) to confirm.
4. Switch channels by using the
CH+ and CH- keys (11) on the
remote.
5. Use ADD/DEL (7) button to
personalize the list of channels.
Push ENTER (10) to confirm.
6. Adjust volume (12) to taste.
7. You are all set!
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connections
This section describes the front panel controls, rear and side connectors, and remote control
in more detail.
Front View of the Product
Use the buttons on the front panel control (or included remote control) to display and adjust
the On Screen Display (OSD). The OSD controls are explained at the top of the next page and
are defined in “OSD Functions” on page 11.
Top Control keys are shown in
detail below
Speaker
IR Receiver
Headphone
Top Control keys
1 2 5 3 4
1 Menu
Turn OSD Menu ON/OFF
Channel up/down when source is at TV or select a control while in OSD
Menu.
2 Channel + / -
Increase/Decrease sound volume or adjust a highlighted control while in
OSD Menu.
3 Volume + / -
4 TV/Video
Toggle the input source from Component >> AV >> S-Video >> TV
5 Power Button
6 IR Receiver
Power ON/OFF
The Remote Control Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View of the Product
Service port
AV-1
A. S-Video Input (black)
Connect to VCR or camcorder
B. Left (white) and right (red) audio inputs
Audio inputs are shared between the video and s-video inputs
C. Video Input (yellow)
Connect to a VCR or game consoles
AV-2
D. YPbPr Input (green, blue, red)
Connect to DVD players, DVD recorders or HDTV receiver
E. Left (white) and right (red) audio inputs
Connect to corresponding audio outputs for DVD or HDTV
TV
F. TV Input (silver)
Connect to antenna or cable service
AC IN (black)
G. 100-240VAC 50/60Hz, 1.5A Input
Connect to power
Service Port
Factory use only
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
The Remote Control should be used within 5 meters of the LCD TV.
1. POWER
Switch the power between on & off
2. DISP
Display the source & channel information
3. MUTE
Switch the sound between on & off
4. CHANNEL NUMBER KEY 0-9, 100
Direct channel selection by number
5. RTN
24.SWAP
Switch PIP/POP Main/Sub source
25.Not Used
No function for this model
26.FREEZE
Freeze the screen
27.Not Used
No function for this model
28.ASPECT
Recall the previous channel
6. CH.SCAN
Select between wide and normal aspect ratio
for DVD movies.
Automatically search & store TV channels
7. ADD / DEL
Use to customize CH. SCAN results
8. SLEEP
Use to shut off TV after a period of time
9. MENU
Press to display or exit the OSD
10.ENTER
Execute a command
11.CHANNEL _/_
Channel Up/Down adjustment; OSD menu
control
12.VOLUME _/_
Volume Up/Down adjustment; OSD menu
control
13.MTS
Multi-language, stereo and mono selection
14.TV/CATV
Set Air, STD, HRC or IRC cable service
15.AUDIO
Adjust audio bass, treble and balance
16.PICTURE
Quick Contrast, Brightness, Hue or
Saturation adjustment
17.TV
Push to select TV source
18.PIP SOURCE
Select PIP Sub picture source
19.S-VIDEO
Push to select S-Video source
20.PIP / POP
Display Main & Sub picture
21.AV
Push to select composite video source
22.PIP SIZE
Adjust PIP Sub picture size
23.COMPONENT
Push to select component video source
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Functions
This section describes each on-screen display (OSD) command.
All the function settings for your LCD TV display are controlled either via the remote control or
using the top control keys on the front panel.
To display the OSD main menu, press the Menu button on the front control keys or the
MENU/EXIT key on the remote control. Use _/_ arrow keys to toggle the sub OSD menu
display (Main Picture >> Main Input >> Multi Screen >> OSD >> TV >> Audio >> Parental
Control). Use _/_ arrow keys to select the details of each sub OSD Menu, then use _/_ arrow
keys to make the desired adjustment. Press the OK Key to confirm the desired selection and
press the Menu button or MENU/EXIT key again to exit the OSD Menu.
The OSD menu display will disappear automatically after 30 seconds, if no action is taken.
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Input: TV or AV or S-Video
Main Picture Menu
Function Name
Brightness
Contrast
Sharpness
Hue
Explanation
Adjust the Brightness of TV
Adjust the Contrast of TV
Adjust the Video Sharpness
Adjust the Video Hue level
Saturation
Aspect Ratio
Close Caption
Adjust the Video Saturation level
Select TV display for 4:3 “normal” or 16:9 wide format content.
Turn Closed Caption on / off select the type of desired. “OFF”, “CC1”,
“CC2”, “CC3”, “CC4”, “TT1”, “TT2”, “TT3”, “TT4”
Multi Screen Menu
Both PIP and POP functions are disabled.
C O M P O N E N T
Figure 1 Multi Screen
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP function is enabled.
C O M P O N E N T
Figure 2 PIP Menu
POP function is enabled.
C O M P O N E N T
Figure 3 POP Menu
Function Name
Explanation
SUB SCREEN
Choose sub screen source,
ꢀ If main screen (input) shown is TV, AV or S-VIDEO, then sub screen will have
input selection of COMPONENT (YPbPr).
ꢀ If main screen (input) shown is COMPONENT (YPbPr), then sub screen will
have input choices of TV, AV or S-VIDEO
MODE
AUDIO
Select multi screen type: “OFF” / “PIP” / “POP”
Select audio output source (Main or Sub)
SWAP
Main screen and sub screen swap (Right key to execute)
Adjust Sub screen size
Adjust Sub screen Horizontal position
Adjust Sub screen Vertical position
Display Side by Side Multi-Window
PIP SIZE
PIP H-POS
PIP V-POS
POP
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menu
Function Name
Explanation
H-POSITION
Adjust OSD on horizontal position
V-POSITION
Adjust OSD on vertical position
TRANSPARENCY
LANGUAGE
Adjust OSD on transparency level
Choose OSD language:
English, Spanish, French, Traditional Chinese
Recall factory default setting. When this function is
executed, the screen will show the message
DEFAULT
Figure 4. Default Message
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Menu
Function Name
MTS
INPUT SIGNAL
Explanation
Selection included Stereo, Sap, Mono, Dual
TV Selection are either STD (standard cable), HRC (HRC cable), IRC (IRC
cable) or Air (Antenna)
AUTO SCAN
SET CHANNEL
CHANNEL
Channel Auto scan (Right arrow key to execute)
Channel selection
Channel selection to be added or deleted
Set the sleep timer on TV from 00, 30, 60, 90, 120 minutes
SLEEP TIME(MINS)
Audio Menu
Function Name
Explanation
VOLUME
BASS
TREBLE
BALANCE
Adjust Volume level
Adjust Bass level
Adjust Treble level
Adjust Left and Right speaker balance
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Control Menu
To access the PARENTAL CONTROL menu (figure 5) enter your password (default is 0000),
then press OK key to confirm selection. If the wrong password is entered, then refer to figure 6.
Figure 5. Key-In Password
Figure 6. Password Incorrect Warning
Password Edit Menu
Figure 7. The warning message is displayed when
the wrong OLD Password is entered
Function Name
Explanation
PASSWORD EDIT
Edit the password (Default is 0000)
OLD: _ _ _ _
Type the old password in 4 numbers, if the wrong password is entered,
then refer to Figure 7
NEW: _ _ _ _
Type the new password in 4 numbers
CONFIRM: _ _ _ _
Re-type the new password for confirmation
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Rating Menu
Set the TV Ratings to block selected TV channels.
MOVIE Rating Menu
Set the Movie Ratings to block selected Movie channels.
Function Name
Explanation
TV RATING
<<< AGE >>>
All Children
TV Y:
TV Y7: Directed to Older Children
TV G: General Audience
TV PG: Parental Guidance Suggested
TV 14: Parents Strongly Cautioned
TV MA: Mature Audience Only
<<< CONTENT >>>
FV:
D:
L:
S:
V:
Fantasy Violence
Suggestive Dialogue
Stronger Language
Sexual Situation
Violence
MOVIE RATING G:
PG:
General audience
Parental Guidance suggested
PG 13: Parents strongly cautioned
R: Restricted
NC 17: No one 17 and under admitted
X:
Adult audience only
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Input: Component
The component input video settings can be adjusted and saved separately from TV, Video
and S-Video inputs.
Main Picture Menu
Function Name
Brightness
Contrast
Sharpness
Hue
Explanation
Brightness adjustment
Contrast adjustment
Adjust the Video Sharpness
Adjust the Video Hue level
Saturation
Aspect Ratio
Adjust the Video Saturation level
Select TV display on “4:3” / “16:9”
For the Main Input, Multi Screen, OSD, and Audio Menu operation, please refer to Pages
12-17.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
This section lists the product specifications and common problems with corresponding
solutions.
Specifications
20.1" (full 20.1" viewable diagonal area), TFT (Thin Film Transistor),
Active Matrix VGA LCD, 640RGB*480 vertical stripe
Panel
Type
Surface treatment Anti-reflective coating + Anti-glare coating
160° (H) / 140° (V)
Viewing Angles
Input Signal
Video
TV system antenna / NSTC in US and TW
Composite Video * 1
S–Video * 1
Component Video * 1 ( YCbCr, YPbPr)
RCA (L/R) Stereo * 2
Audio
Speaker Output
Power
5W * 2
Voltage
100-240 VAC, 50/60 Hz (auto switch), 1.5A
32° F to + 95° F (0° C to + 35° C)
20% to 90% (no condensation)
To 3,000 Meter
Operating Conditions
Temperature
Humidity
Altitude
Storage Conditions
Dimensions
Temperature
Humidity
Altitude
-4° F to + 140° F (-20° C to + 60° C)
5% to 90% (no condensation)
To 12,000 Meter
Physical
573 mm (W) x 472 mm (H) x 227.5 mm (D)
22.76" (W) x 18.58” (H) x 8.96” (D)
19.8 lb (9.0 kg)
Weight
Net
Regulations
Power Saving
Modes
FCC-B, UL, c-UL,
On
<73W (Blue LED)
Active Off
<5W (LED OFF)
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No power
• Make sure DC power button is ON (Green LED)
•
Make sure AC power cord is securely connected to the AC socket
• Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage
Power is ON but no screen image
•
Adjust brightness and contrast
• Check Source settings
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an
improper connection
• The red connector for right audio is easily confused with the red Pr connector in YPbPr
component video input. Double check that they are correctly attached.
• Remove distribution amplifiers from the signal path.
Snow appears on screen
• Check your antenna connection
• Remove unnecessary signal splitters to improve signal quality
• Replace poor or worn cables to properly match 75 ohm impedance
• Check TV / CATV selection
No sound
• Check your audio connection
• Press MUTE on the remote control again, so that MUTE disappears from the screen
• Check your audio settings, your TV audio may be set to SAP or minimum
• Press the Volume + (Up) key on your remote control
• Make sure that headphones are not connected
Remote control does not work
• Make sure batteries are inserted correctly
• Replace old or worn batteries
Remote control code not found in “universal” remote
• Purchase a separate “learning” remote control
How do I mount the LCD TV on a wall
• Remove the rear cover plate to expose 4 screw holes on 75mm VESA hole pattern
• Use professional installation to reduce risk of injury and damage
How do I find more help?
• Contact customer service at (866) 287-5555 or [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|