Backup Monitor System
LCD Monitor &
CCD Color Camera
Backup Monitor System
Copyright © 2003 TMI Products, Inc.
All Rights Reserved
Corona, CA U.S.A.
Owner’s Manual
060300
1493 Bentley Drive • Corona, CA 92879 • 909-272-1996 • 800-624-7960 • Fax 909-272-1584
Fall 2003
99-8019-000 10/03
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Controls
Specification
Image Device
Number of Pixels
Scanning System
Sync System
WM-345 (NTSC)
1/3˝ Interline CCD
(H) 510 x 492
WM-345C (Pal)
Monitor Controls:
1/3˝ Interline CCD
(H) 500 x 582
Sensor: Remote sensor for the
remote control.
525 Lines, 60 Field/Sec
Internal Synchronization
330 TV Line
625 Lines, 50 Field/Sec
Internal Synchronization
330 TV Line
Volume (-): Adjusts down with each
function in the menu.
Horizontal Resolution
Video Output
Mode: Switches through the
functions in the menu to select
the desired screen adjustments.
1 Vp-p 75 Ω
1 Vp-p 75 Ω
B.L.C.
Back Light
Back Light
Compensation (auto)
Compensation (auto)
Volume (+): Adjusts up with each
function in the menu.
White Balance
Auto White Balance
(auto)
Auto White Balance
(auto)
Power: Turns the monitor on and off.
Minimum Illumination 1 Lux (F: 2.0)
1 Lux (F: 2.0)
Remote Control:
Electronic Shutter
Built-In Lens
1/60 ~ 1/100,000 Sec
1/50 ~ 1/100,000 Sec
F: 2.97 (option)
Screen Power: Press the ‘POWER’ button to illuminate
F: 2.97 (option)
the LCD screen.
Power Consumption
Operation Temp.
12 V 10% DC, 100 mA
12 V 10% DC, 100 mA
Control: Pressing the ‘CONTROL’ button will allow
source selection by pressing the ‘AV’ button.
-10°C ~ +50°C,
RH 95% Max.
-10°C ~ +50°C,
RH 95% Max.
Storage Temp.
-20°C ~ +60°C,
RH 95% Max.
-20°C ~ +60°C,
RH 95% Max.
Monitor: Pressing the ‘MONITOR’ button allows the
following adjustments to be selected.
Weight
Approx. 134 g
Aluminum
Approx. 134 g
Aluminum
Adjusting the screen options:
Housing
Screen Adjustments: Press the ‘PIC’ button to select the
Accessories
Angle Controller Ring – 3 sets Angle Controller Ring – 3 sets
desired screen adjustment, then press the ‘VOL (-)’ or ‘VOL (+)’ to
change the setting. Each press of the ‘PIC’ button will cycle to the next
adjustment in the following order: Contrast, Brightness, Color, Tint, Blue
Screen, Power Direct, Color System, Mirror Mode, Mode Selector.
Fixing Ring – 3 pcs.
Fixing Tube – 1 pc.
Fixing Ring – 3 pcs.
Fixing Tube – 1 pc.
Contrast: Adjusts the differentiation between light and dark.
Brightness: Adjust the overall Brightness of the LCD display.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls (cont.)
Setup Operation (cont.)
Color: Adjusts the intensity of the display colors.
Press PIC button on the remote control (or Mode button on the
Monitor). It will appear on the screen in order as the following pictures.
Tint: Adjusts the overall red/green color balance.
Blue Screen: Select ‘OFF’ to see the video program while adjusting the
display. Select ‘ON’ to see a blue screen while making display adjustments.
CONTRAST
BRIGHT
COLOR
TINT
Setup Operation
Blue Screen: OFF
Power Direct: Off
Color System: NTSC
Mirror Mode: Normal
This system is designed to allow the backup system to only operate
when the vehicle is in reverse.
Adjust each function, CONTRAST, BRIGHTNESS, COLOR, TINT, ON/OFF,
NTSC/PAL, NORMAL, MODE SELECTOR with VOL (+ -) button.
1. Set up directions:
a. Engage the Emergency Brake
System Operation
1. Turn the system on using the ‘Power ON’ switch on the monitor.
b. Turn the ignition on only. Do not start the vehicle.
c. Put the vehicle in reverse.
2. Switch the monitor to A/V (1).
d. Push power on the monitor to turn it on.
e. Push the ‘MODE’ button on the screen to access the functions.
2. No picture will be displayed while driving.
2. Once the vehicle is put in reverse, the screen will switch over to A/V
(2) to display the camera view. Once the screen is put into drive, the
screen will revert to A/V (1).
f. Continue pushing the ‘MODE’ button until you get to
‘POWER DIRECT: OFF’.
g. Push ‘VOLUME (+)’ to select ‘ON’.
3. Switch the monitor to A/V (2).
h. This will allow the monitor to turn ‘ON’ every time the Vehicle
is put in reverse.
2. The monitor will display the camera view. (Driving forward, or
backing up)
i. The setup is now finished.
See wire diagram for installation directions.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Care and Maintenance
• No Display: (Screen is black)
Your backup monitor system is a product of superior design and crafts-
manship and should be treated with care. The suggestions below will
help to fulfill warranty obligations and to provide many years
of enjoyment.
- Verify that +12V power is correctly supplied to the
A/V Control Module.
- Verify that the Monitor Cable is connected to the
A/V Control Module.
Cleaning the Monitor Screen and Housing:
• The components may be cleaned by gentle wiping with a soft,
lint-free, cotton cloth that has been slightly dampened with water.
- Verify that the + 12V circuit is on (i.e. ignition position).
- Verify that the Setup Operations steps were taken. (Page 4)
CAUTION: Do not use liquids, abrasives, aerosol cleaners, or
paper cleaning products because they will result in permanent
damage to the finish of your components! The LCD screen is made
of a specially coated glass and can be scratched or damaged by
abrasive or ammonia-based window cleaners.
• No video: (screen displays blue screen)
- Make sure that all cables are connected properly.
- Make sure that the Camera Cable is connected to the
A/V Control Module.
• Use and Storage:
- These units contain precision electronics that must be
protected from dust, dirt, and moisture.
- Make sure the the Monitor power switch is toggled On.
- Never spill liquids on any of the components. Liquids,
humidity, and precipitation contain minerals that will
corrode electronic circuits.
• Take care to avoid the following:
- Rough handling can break internal circuit boards. Do not
drop, knock, or shake the components.
- Do not attempt to paint or refinish the components. Paint can
clog moving parts and prevent proper operation.
- The components can be damaged by non-expert handling.
Attempting to open any of the components may void the
Limited Warranty.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
How to Obtain Warranty Service
ONE YEAR LIMITED WARRANTY
NONTRANSFERABLE
To obtain warranty service, the product(s) must be returned to an
authorized installer accompanied by proof of warranty coverage.
Terms of Warranty
TMI Products, Inc (the Company) warrants to the original retail purchaser, that the auto video product(s)
purchased from a Company authorized installer are free from defects in materials or workmanship under
normal use and conditions for a period of one (1) year from date of purchase, except, the remote control
and headphones which are warranted for a period of sixty (60) days from date of purchase. A sales
receipt is required to provide proof of date of purchase.
How State Law Relates to the Warranty
Should the product(s) be determined defective during the applicable warranty period, the defect(s) will
be repaired or replaced with a new or reconditioned part(s), at the Company’s option. To obtain warranty
service, the product(s) must be returned to a Company authorized installer along with proof of
warranty coverage.
Some states do not allow limitation on how long an implied warranty
lasts. In such states, the limitations or exclusions of this Limited
Warranty may not apply. Some states do not allow the exclusion or
limitation of incidental or consequential damages. In such states, the
exclusion or limitation of this Limited Warranty may not apply to you.
This Limited Warranty gives you specific legal rights and you may
have other rights which vary from state to state.
Exclusions:
This limited warranty excludes:
• Elimination of externally generated static or noise, or the correction of antenna problems or weak
television reception.
• Costs incurred for installation, removal or reinstallation of the product(s).
• Damage to tapes, video games, software, camcorders, discs, speakers, accessories or vehicle
electrical systems.
• Cosmetic damage or damage due to negligence, misuse, abuse, failure to follow operation instructions,
accidental spills or customer applied cleaners.
• Damage due to environmental causes such as floods, airborne fallout, chemicals, salt, hail, windstorms,
lightning or extreme temperatures.
• Damage due to accidents, road hazards, fire, theft or vandalism.
• Damage due to improper installation or connection, improper connection to equipment of another manu-
facturer, modifications of existing equipment, use of a faulty tape cartridge or cleaning of the VCR head.
• Product(s) which have been opened or tampered with for any reason or which have been damaged due
to alteration or service performed by anyone other than the Company or a Company authorized installer.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, THE COMPANY MAKES NO OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THE COMPANY EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN
THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO
THE TERMS OF THIS EXPRESSED LIMITED WARRANTY.
Some states do not allow limitation on how long an implied warranty lasts. In such states, the limitations
or exclusions of this Limited Warranty may not apply.
Some states do not allow the exclusion or limitation of incidental or consequential damages. In such
states, the exclusion or limitation of this Limited Warranty may not apply to you. This Limited Warranty
gives you specific legal rights and you may have other rights, which vary from state to state.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, THE COMPANY MAKES NO OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THE COMPANY EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN
THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO
THE TERMS OF THIS EXPRESSED LIMITED WARRANTY.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|