32” HOME THEATER SOUND BAR
VSB205 - QUICK START GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
32” Home Theater Sound Bar
Power Adapter for Sound Bar
Stereo RCA to 3.5mm Audio Cable
Quick Start Guide
Remote Control with Battery
Download from Www.Somanuals.com. All Manuals Search And Download.
1
CONTROLS & CONNECTIONS
Power
Press to turn on or off.
Volume Up
Press to increase system
TOP
volume.
Input
Vol -
Vol +
Input
Press to change input
source.
Volume Down
Press to decrease system
volume.
Input 1
Input 2
BACK
Input 2
(3.5mm Stereo)
Service Port
(For use by authorized
service technician only.)
Power Port
Input 1
(Stereo RCA)
Download from Www.Somanuals.com. All Manuals Search And Download.
2
FIRST-TIME SETUP
1
AUDIO OUT
AUDIO OUT
Back of TV*
Stereo RCA to
3.5mm Cable
Stereo RCA to
3.5mm Cable
1
OR
u
2
Input
1
nput
2
*For best performance, connect the Sound Bar to one of the audio outputs of your TV as shown above. Not all TVs have the audio outputs
shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
2
Input
1
Input
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
Gently pull the plastic tab from the back of
the remote control. (The plastic tab can be
thrown away.)
Turn your TV on, then press the Power button
on the remote to turn the Sound Bar on.
+
Power
MUTE
Press the Input button to switch between
the Input 1 and Input 2 audio sources. For
example, if you connected your TV to Input 1,
set the Sound Bar to Input 1.
-
Input
Input
SRS
Setup is complete.
Input
Download from Www.Somanuals.com. All Manuals Search And Download.
5
USING THE REMOTE
Power
Press to turn on or off.
Volume Up
Press to increase volume.
+
Mute
Press to mute/unmute.
MUTE
There is no sound when muted.
Volume Down
Press to decrease volume.
-
SRS
Input
Input
SRS
Press to turn SRS WOW on or off.
SRS WOW enhances your music
and movie audio for more clarity
and better bass.
Press to change input source.
If your remote stops responding, you may
need to replace the battery.
To replace the battery, remove the cover from
the back of the remote as shown, then replace
the old battery with a new CR2025. Be sure
+
that the sign on the battery is facing up.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
WALL MOUNTING THE SOUND BAR
1
Remove the screw from the Sound
Bar stands and rotate as shown.
2
22 11/16”
(58.26 cm)
Be sure your screws are attached
to wood studs or drywall anchors
(for drywall) or concrete anchors
(for brick/concrete walls).
Reattach stands using
the included screw.
If you are unfamiliar with power tools or the layout of electrical
wiring in the walls of your home, consult a professional installer.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
VIZIO RECOMMENDS
Complete your home theater experience! The VIZIO Blu-ray Player with Wireless Internet Apps delivers
full 1080p HD video, 7.1 surround sound and has built-in 802.11n dual-band wireless for easy access to
movies, TV shows, music and more from the Internet.
• Exceptional Full HD 1080p performance
• Streams movies, music, and more with VIZIO Wireless Internet Apps
• Built-in Wi-Fi 802.11n
AVAILABLE AT VIZIO.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
8
TROUBLESHOOTING AND TECHNICAL SUPPORT
Products are often returned due to a technical problem rather than a defective
product. Replacement may result in unnecessary shipping charges billed to
you. Our trained support personnel can often resolve the problem over the
phone. For more information on warranty service or repair, after the warranty
period, please contact our Support Department.
Phone(877) 698-4946
Fax(949) 585-9563
Email[email protected]
Web
Hours of operation:
Monday - Friday: 6 am to 9 pm (PST)
Saturday - Sunday: 8 am to 4pm (PST)
Customer support and quality service are integral parts ofVIZIO’s commitment
to service excellence. For technical assistance contact our VIZIO Technical
Support Department via email or phone. Please have your VIZIO model
number, serial number, and date of purchase available before your call.
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cord is securely connected.
• Ensure the light on the power adapter is glowing green.
• Plug a different device into the electrical outlet to verify that the outlet is working
correctly.
There is no
power
• Increase the volume. Press Volume Up on the remote control or on the top of your
Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the top of your Sound Bar to select a different
input source.
• If you are using the 3.5mm output from your TV, be sure that is connected to an
audio OUTPUT and not audio INPUT. Some TVs use 3.5mm audio INPUT for devices
such as computers.
There is no
sound
• Your TV may be set to variable audio output. Confirm that the audio output setting is
set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for
more detailed information.
• Ensure all cables and wires are securely connected.
I hear buzzing or
humming
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing
persists. If it does not, the problem may be with the original device.
• Connect your device to a different input on the Sound Bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
IMPORTANT SAFETY INSTRUCTIONS
Your Sound Bar is designed and manufactured to operate • Only power of the marked voltage can be used for your
within defined design limits, and misuse may result in Sound Bar. Any other voltage than the specified voltage may
electric shock or fire. To prevent your Sound Bar from cause fire or electric shock
being damaged, the following rules should be observed
• The power cord must be replaced when using different
for its installation, use, and maintenance. Please read
voltage than the voltage specified. For more information,
the following safety instructions before operating you
contact your dealer.
Sound Bar. Keep these instructions in a safe place fo
future reference.
• Your Sound Bar AC/DC Adapters are equipped with a
three-pronged grounded plug (a plug with a third grounding
pin). This plug will fit only into a grounded power outlet. This
is a safety feature. If your outlet does not accommodate the
three-pronged, have an electrician install the correct outlet,
• To reduce the risk of electric shock or component damage
switch off the power before connecting other components to
your Sound Bar.
• Unplug the power cord before cleaning your Sound Baror use an adapter to ground your Sound Bar safely.
A damp cloth is sufficient for cleaning. Do not use a liquid
• Do not defeat the safety purpose of the grounded plug.
or a spray cleaner on your Sound Bar. Do not use abrasive
cleaners.
• When connected to a power outlet, power is always flowing
into your Sound Bar. To totally disconnect power, unplug the
power cord.
• Always use the accessories recommended by the
manufacturer to insure compatibility.
• The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of un-isolated,
dangerous voltage within your Sound Bar
that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
• When moving your Sound Bar from an area of low
temperature to an area of high temperature, condensation
may form in the housing. Wait before turning on your Sound
Bar to avoid causing fire, electric shock, or componen
damage.
• A distance of at least 3 feet should be maintained between
your Sound Bar and any heat source, such as a radiator
heater, oven, amplifier etc. Do not install your Sound Ba
close to smoke. Operating your Sound Bar close to smoke o
moisture may cause fire or electric shock.
• The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
servicing instructions in the literature
accompanying your Sound Bar.
• Slots and openings in the back and bottom of the cabine
are provided for ventilation. To ensure reliable operation o
your Sound Bar and to protect it from overheating, be sure
these openings are not blocked or covered. Do not place you
Sound Bar in a bookcase or cabinet unless proper ventilation
is provided.
• Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
• The wall socket should be located near your Sound Bar and
be easily accessible
• Do not touch the power cord during lightning. To avoid
electric shock, avoid handling the power cord during
electrical storms.
• Never push any object into the slots and openings on you
Sound Bar enclosure. Do not place any objects on the top o
your Sound Bar. Doing so could short circuit parts causing a
fire or electric shock. Never spill liquids on your Sound Bar.
• Unplug your Sound Bar during a lightning storm or when it
will not be used for long periods of time. This will protect your
Sound Bar from damage due to power surges.
• Your Sound Bar should be operated only from the type o
power source indicated on the label on the AC/DC Adapters. I
you are not sure of the type of power supplied to your home
consult your dealer or local power company.
• Do not attempt to repair or service Sound Bar yourself.
Opening or removing the front cover may expose you to
Download from Www.Somanuals.com. All Manuals Search And Download.
10
SPECIFICATIONS
high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.
Sound Bar: Four 2.75” High-Efficiency
Hand-Built Full Range Transducers
Inputs: 1 x 3.5mm Audio
1 x RCA Stereo Audio
• Keep your Sound Bar away from moisture. Do not expose
your Sound Bar to rain or moisture. If water penetrates into
your Sound Bar, unplug the power cord and contact your
dealer. Continuous use in this case may result in fire or
electric shock.
Sound Pressure
Level: 98 dB
Frequency
• Do not use your Sound Bar if any abnormality occurs. If
any smoke or odor becomes apparent, unplug the power cord
and contact your dealer immediately. Do not try to repair your
Sound Bar yourself.
Response: 90Hz - 19 KHz
Voltage: 100-240 VAC, 50-60 Hz
Dimensions: 31.50” x 3.98” x 2.75” (with stand)
31.50” x 3.20” x 2.75” (w/o stand)
Net Weight: 4.76 lbs (with stand)
4.10 lbs (w/o stand)
• Avoid using dropped or damaged appliances. If your Sound
Bar is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord
immediately and contact your dealer for repair. Continued use
of your Sound Bar may cause fire or electric shock.
Gross Weight: 6.98 lbs
Compliances: UL, FCC
• Do not install your Sound Bar in an area with heavy dust
or high humidity. Operating your Sound Bar in environments
with heavy dust or high humidity may cause fire or electric
shock.
• Ensure that the power cord and any other cables are
unplugged before moving your Sound Bar.
• When unplugging your Sound Bar, hold the power plug, not
the cord. Pulling on the power cord may damage the wires
inside the cord and cause fire or electric shock. When your
Sound Bar will not be used for an extended period of time,
unplug the power cord.
• To reduce risk of electric shock, do not touch the connector
with wet hands.
• Insert the remote control battery in accordance with
instructions. Incorrect polarity may cause the battery to leak
which can damage the remote control or injure the operator.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays
- Liquid sprays or any object drops into your Sound Bar
- Sound Bar is exposed to rain or other moisture
- Sound Bar is dropped or damaged in any way
- The performance of your Sound Bar changes
substantially
Download from Www.Somanuals.com. All Manuals Search And Download.
11
ONE-YEAR LIMITED WARRANTY
tr
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year
of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within
the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: [email protected] or via phone at 877 MY VIZIO (877.698.4946)
THORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase
receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s
option and sole discretion. Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety (90)
days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the
service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A
VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal
degree of protection.VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic
damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of
God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone
other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are
not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF
TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER
INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT,
SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF
INFORMATION OR DATA,COMMERCIAL LOSS,LOST REVENUE OR LOST PROFITS,OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES.SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
LEGAL & COMPLIANCE
pursuant to Part 15 of the FCC Rules.These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the respon-
sibilities of the user to correct such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device
complies with FCC radiation exposure limits set forth for an uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator & your body.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components
and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling
options.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
© 2011. ALL RIGHTS RESERVED. THE V, VIZIO, VIZIO INTERNET APPS, THEATER 3D, FULL ARRAY TRULED, EDGE LIT RAZOR LED, 240HZ
SPS, 480HZ SPS, ENTERTAINMENT FREEDOM AND ENTERTAINMENT FREEDOM FOR ALL NAMES, LOGOS AND PHRASE ARE REGISTERED OR
UNREGISTERED TRADEMARKS OF VIZIO, INC. OTHER LOGOS AND TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
110215ST-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|