Vivitar Digital Camera 8690 User Manual

ViviCam 8690Digital Camera  
User‟s Manual  
© 2009 Sakar International, Inc. All rights reserved.  
Windows and the Windows logo are registered trademarks of Microsoft Corporation.  
All other trademarks are the property of their respective companies.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Thank you for purchasing the ViviCam 8690 Digital Camera. Everything you need to take quality digital  
photos and videos is included with your camera.  
Your digital camera can also be used as a removable disk. It enriches your life.  
Vivitar makes capturing those special moments so easy.  
Please read this manual carefully first in order to get the most out of your digital camera.  
Key Features  
Digital Video resolutions - 320x240 Pixels, 640x480 Pixels.  
8.1 mega pixels camera with choice of 6 digital camera resolutions-  
3264X2448(8MP), 2560X1920(5MP), 2048x1536 (3M), 1600x1200 (2M), 1280x960 (1MP),  
640x480 (VGA) pixels.  
2.4 inch TFT LCD  
4X digital zoom  
SD memory card slot accepts SD compatible memory card up to 8GB.  
Built in Flash  
Vivitar Experience Image Manager software for uploading and managing photos and videos to or  
from the most popular photo sharing and social network websites.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
   
What Your Camera Includes  
Digital Camera  
Vivitar Experience Image Manager software Installation CD  
USB cable  
Quick Start Guide  
Strap  
Computer System Requirements for Windows XP  
To be able to download photos and videos to your PC, you will need the following minimum  
configuration:  
Pentium 4 processor or above with Windows XP service pack 2  
512 MB RAM, with 100MB of free disk space  
1024 x 768 Recommended screen resolution  
16-bit color or higher display adaptor  
CD-ROM Drive  
QuickTime 6 or higher  
Microsoft Internet Explorer 7 or higher  
Windows Media Player 10 or higher  
Internet connection required  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
   
Computer System Requirements for Windows Vista  
To be able to download photos to your PC your will need the following minimum configuration:  
Windows Vista  
800MHz processor and 512 MB of system memory  
20GB hard drive with at least 15GB of available space  
Support for Super VGA graphics  
Available USB Interface  
CD-ROM drive QuickTime 6 or higher  
Microsoft Internet Explorer 7 or higher  
Internet connection required  
Computer System Requirements for Macintosh  
Macintosh with Intel processor running Mac OS X v10.4.6 or later  
256 MB RAM, 100 MB free disk space  
Display: 1024 x 768 or higher-resolution monitor  
QuickTime 6 or higher  
Internet connection required  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
   
Quick Look at Your Camera  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
 
Prepare Your Camera for use  
Install batteries  
Your camera requires three AAA batteries (alkaline batteries recommended). Please refer to the  
following installation instructions:  
1. Open the battery compartment on the side of the camera.  
2. Insert the alkaline batteries correctly, with the correct polarity as shown on the battery cover.  
3. Close the battery compartment.  
When the Low Battery icon  
and Low Batterymessage flashes on the LCD screen, you need to  
replace your camera‟s batteries. If you do not have an SD memory card in the camera, you will need to  
download the test photos you have on the camera before switching off the camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
 
WARNING: Unless you are using an SD memory card, opening the battery compartment and  
removing the battery will erase the test photo currently stored in the camera. Download your photo as  
often as possible. The test photo will be lost when the camera switches-off or when the batteries  
run low. Do not open the battery door before switching off the camera.  
Note:  
1. Please remove your batteries when you dont intend to use your camera for a long time to prevent  
leakage and corrosion.  
2. Please take care that you do not take out the batteries or power off your camera at will, otherwise  
the test photos in the built-in memory will be lost before they are either downloaded or copied to  
the SD memory card inserted.  
3. Do not mix old and new batteries.  
4. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium metal  
hydride) batteries.  
Install SD memory card  
This camera needs an SD Memory card for normal use. This camera supports any compatible SD  
memory card up to 8GB. Limited internal memory is only for you to take one test photo. The photo will  
be lost when the camera turns off or if the batteries are removed.  
Please refer to the below diagram for correct installation method:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Locate the SD memory card slot on the bottom of the camera and insert an SD memory card as above.  
You will feel and hear a Clicksound. When the  
icon appears on the LCD screen this indicates  
that your SD card is installed correctly.  
Note:  
1. After you insert the SD memory card, a Copy to Card?message will appear on the LCD. To  
save the photo, press the Right/Left button to select Yesand press the Menu/OK button to save  
the test photo to the SD memory card. Select Noand press the Menu/OK button if you do not  
want to save the test photo.  
2. After the SD memory is inserted successful, the photos/videos you take will be stored on the SD  
memory card.  
3. Formatting will delete all data on the SD memory card including protected data.  
4. Dont remove the SD card during formatting as this may damage the card and render it unusable.  
5. An SD memory card formatted on a PC or device other than the camera should not be used. Be  
sure to format the card with your camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Starting Your Digital Camera  
Power on  
Press the Power button once to turn on your camera. The LCD will light up and the camera will emit a  
beepto indicate that your camera is turned on and ready for use.  
Power off  
Press the Power button once to turn off your camera. When there is insufficient battery power, a Low  
Batterymessage will appear on the LCD screen and the camera will power off automatically after a  
few seconds.  
MODE switch  
Your digital camera has 3 modes - Camera mode, Video mode and Playback mode.  
Move the mode switch between the 3 modes to select the one that you want to use.  
Camera Mode (Left):  
Take still photos  
Video Mode (Middle):  
Capture video files  
Playback Mode (Right):  
View, print and edit photos and view videos  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
The Camera mode is for you to take still photos. You can shoot video files while in Video mode. In  
Playback mode you can preview the photos/videos you captured, rotate, protect, delete, crop and print  
your photos.  
Main buttons on the camera  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Main Icons on the LCD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
Battery power level  
Full battery power  
Self-timer On 10 seconds  
Self-timer On 2 seconds  
Medium battery power  
Low battery power  
Normal Capture  
Photo quality  
Macro Capture  
Normal quality  
Date on photo  
Fine quality  
Digital Zoom  
Super quality  
Flash  
Force Flash  
Protect  
Protect On  
Auto  
No Flash  
Modes  
Anti-Shake  
Anti-Shake on  
Anti-Shake off  
Camera  
Video  
Playback  
Scenes  
Auto  
Night Portrait  
Night Scenery  
Sport  
Portrait  
Party  
Scenery  
Beach  
SD card inserted  
High Sensitivity  
SD card inserted (Locked)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Camera mode  
Set the mode switch to Camera Mode the  
icon will appear on the top right corner of the LCD  
screen.  
Taking Photos  
1. Hold the camera steady and compose your object as appears in the LCD screen.  
2. Press the Shutter button and wait a moment for the photo to be taken and saved to memory.  
3. After each photo is shot and the camera returns to icon mode, the numbers of photos left to  
shoot at this resolution is displayed on the top right of the LCD screen.  
Note: When the memory is full, the LCD screen will display Disk FullIf you attempt to take a photo  
when the camera‟s internal memory is full, the camera will beep continuously. Please download the test  
images to your computer as soon as possible using the Vivitar Experience Image Manager software as  
described below in the section “Transfer photos and videos to your computeror insert an SD  
memory card in order to take more images!  
Short-cut buttons on the camera  
Digital Zoom function  
In the Photo, Video and Playback modes, you can magnify your subject using the 4X digital zoom.  
1. Use the T and W buttons to adjust the zoom.  
2. The icon  
will appear on the LCD screen.  
3. Press the T button to zoom in on your subject.  
4. Push the W button to zoom back out.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
 
Macro/Far shooting  
The camera has the function that allows you to capture objects at very near (macro) or very far  
distances per your request.  
1. Slide the Macro/Far switch on the left side of the camera up to the  
2. The icon will appear on the left hand side of the LCD screen and indicates that the macro  
shooting is on.  
3. For far shooting slide the Macro/Far switch down to the  
4. The icon appears on the LCD screen to indicate that the far shooting is on.  
position.  
position.  
Note: The flash will not work if the camera is in the Macro setting.  
Flash  
Your camera has a built in flash function which enables you to take photos when the light condition is  
not good. The flash can only be activated in the photo mode.  
1. Press the Up button on the Menu dial to activate the flash.  
2. Press the Up button once until you see the  
icon appear on the LCD screen. This  
indicates that the Auto flash is on. Auto flash will operated the flash if the lighting conditions  
are too dark when you take a photo.  
3. Press the Up button again to change to the force flash function.  
4. The icon  
use.  
will appear on the LCD indicating that the force flash is turned on and ready to  
5. To turn off the flash function, press the Up button again until the  
the LCD.  
icon is displayed on  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Note: A No Powermessage will appear on the LCD screen, if you select the flash function when the  
battery power is insufficient. To continue using the camera with the flash, please install new batteries.  
Self-Timer  
You can include yourself in a photo by using this feature to delay the time between your pressing the  
shutter and when the photo is actually taken. It is recommended that you use a tripod or place the  
camera on a steady and flat surface before you use the self-timer. The timer is either for 2 or 10  
seconds.  
1. Press the Down or Timer button.  
2. The icon  
second timer.  
3. The LED will flash and the camera will countdown 2 seconds before the picture is taken.  
appears on the top of the LCD screen. Press the Shutter button to activate the 2  
4. Press the down button again to select the 10 seconds self timer.  
5. Press the shutter button to start a 10 second count down after which the photo will automatically  
be taken.  
Delete (Last Photo or Video)  
You can delete the last photo or video taken while in Camera or Video mode.  
1.  
Press the Right/Delete button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
2.  
From the “This Image” or “This Video” message that appears, press Left/Right button to  
select “Yes.  
3.  
Press the Menu/OK button to confirm and for the selected image to be deleted.  
At step 2, if you do not wish to delete the photo select No” by pressing the Up/Down button, then  
press the Menu/OK button.  
Note: No Filewill appear on the LCD when you press the right button in the camera/video mode  
to delete the last photo/video if you have not taken any images!  
Scene  
To ensure that the images you capture are captured in the correct light and environmental conditions  
you can manually select the scene.  
1. In Camera mode press the Left/Scene button.  
2. The scene options icons will appear on the upper left corner of the LCD next to the camera  
icon.  
3. Press the Scene button to toggle between the options:  
Auto, Night Portrait, Night Scenery, Portrait, Scenery, Sport, Party, Beach or High  
Sensitivity.  
4. As you toggle through the scenes the lighting effect appears on the LCD.  
5. Once the appropriate scene is selected, press the Shutter button to take you photo.  
Note: The Scene options can also be selected by pressing the MENU/OK button in the Photo menu.  
Here you will be able to recognize the different Scene icons and related scene detail.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Camera mode Menu setting options  
To access the Menu setting options for the Camera mode press the Menu button in the center of the  
Menu dial.  
4 menu options each with their own submenus will appear:  
Scene, Image Size, Anti-Shake and Setup  
1. Press the Power button to turn on your camera,  
2. Set the mode to Camera Mode - the  
3. Press the Menu/OK button.  
icon will appear on the LCD screen.  
4. Press the Left/Right buttons to move between the menu options that appear.  
5. Press the Up/Down buttons to select the submenu option within the selected menu.  
6. Press the Menu/OK button to confirm and save the setting.  
Scene  
Your camera comes with built-in scenes for you to take photos in almost any environment. You can  
choose your best scenery according to your light and environmental conditions.  
1. Press the Menu/OK button.  
2. Press the Left/Right buttons to move between the menu options that appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
3. Press the Up/Down button to select the best scenery per your light condition and  
environment.  
Auto, Night Portrait, Night Scenery, Portrait, Scenery, Sport, Party, Beach or High  
Sensitivity.  
4. Press the Menu/OK button to confirm your selection and exit to standby mode.  
Note:  
1. After you have selected your scenery, the corresponding scenery icon will appear on the LCD.  
Some scenery will automatically activate the flash function after setting. The default scene is Auto.  
2. You can press the Left button for setting different scenes quickly.  
Image Size  
The image size and quality settings determine the number of photos that can be saved and the  
amount of memory required for each photo. The higher the photo quality the more memory it will take.  
The image size and quality will also affect the maximum size you can print your photo effectively. To  
set the Image size:  
1. Press the Menu/OK button.  
2. Press the Right/Left button until you select the Image Size option.  
3. Press the Up/Down button to select the desired image size.  
3264x2448(8MP), 2560X1920(5MP), 2048x1536 (3M), 1600x1200 (2M), 1280x960 (1MP),  
640x480 (VGA) pixels  
4. Press the Menu/OK button to confirm your choice and exit to standby mode.  
Note: The image size icon will appear on the right side of the LCD screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Anti-Shake  
Your Digital Camera has a function that prevents photos coming out blurry as a result of trembling  
or shaking when taking the photo. Because of this function, you are not required to use a tripod to  
shoot steady photos. To set as below:  
1. Press the Menu/OK button.  
2. Press the Right/Left button until you select the Anti-Shake menu option.  
3. Press the Up/Down button to select Onor Off.  
4. Press the Menu/OK button to confirm and exit to standby mode.  
Note: The  
icon will appear on the left side of the LCD screen if you selected Yes.  
Setup Menu  
You can manually set your camera for the setting that best suits your present situation:  
Exposure, ISO, White Balance, Sharpness, Quality, Date, Auto Power Off, Language, Frequency,  
Format, Default Setting or Cancel.  
To enter and change the different Setup options:  
1. Press the Menu/OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
2. Press the Right/Left button until you select the Setup menu.  
Exposure  
This setting allows you to control the brightness of your images.  
1. Press the Up/Down button to select the Exposure option in the Setup menu.  
2. Press the Menu/OK button to open the Exposure submenu.  
3. Press the Up/Down button to select the exposure value (from+3 to -3).  
4. Press the Menu/OK button to confirm, save your setting and exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
ISO  
This setting allows you to select the ISO setting that you want as per your current conditions.  
1. Press Up/Down button to select the ISO option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to choose the ISO option from the ISO submenu that appears:  
Auto /100 / 200 / 400  
4. Press the Menu/OK button to confirm and exit.  
White Balance  
This setting allows the camera to adjust the color of your photos according to the color of your light  
source.  
1. Press the Up/Down button to select the White Balance option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to choose the best option –  
Auto / Daylight / Cloudy / Incandescent / Fluorescent  
4. Press the Menu/OK button to confirm and exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Sharpness  
This setting allows you to adjust the sharpness of your images, making edges more or less distinct.  
1. Press the Up/Down button to select the Sharpness option in Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to select a sharpness value.  
Normal / Sharp / Soft  
4. Press the Menu/OK button to confirm, save your option and exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Quality  
The quality settings determine the number of photos and the amount of memory  
required for each photo. The better the quality, the more memory each photo will use.  
The quality will also affect the maximum size you can print your photo effectively.  
The default value is Fine.  
1. Press the Up/Down button to select the Quality option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to select the best quality for you.  
Super Fine / Fine / Normal  
4. Press the Menu/OK button to confirm and exit.  
Note: After you confirm, the quality star icon will appear on the LCD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Date  
This allows you to set the system time which will be display on the photos if you selected date on.  
1. Press the Up/Down button to select the Date option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to select:  
On - displays date on photos  
Off - wont show date on photos  
Set date - setting the system date  
4. Press the Menu/OK button to confirm.  
If you wish to change the date press the Set Date option:  
1. Press the Menu/OK button to enter the Set Date submenu option.  
2. Press the Right/Left button to move between the options:  
Year / Month / Day / Hour / Minute / Seconds / Date format  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
3. Press the Up/Down button to set the digits for each of the date, time and format options.  
4. Press the Menu/OK button to confirm and exit.  
Auto Power Off  
By default your camera will automatically power off if idle for 60 seconds. Use this option to change  
the time.  
1. Press the Up/Down button to select the Auto Power Off option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to select a time:  
60 Seconds / 120 Seconds / 180 Seconds / None  
Note: If you select None, the camera will not be powered off until the battery power is used up or  
you turn the camera off manually.  
4. Press the Menu/OK button to confirm and exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Language  
Your Digital Camera supports 9 languages.  
1. Press the Up/Down button to select the Language option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to select the language of your choice:  
English / Portuguese / Spanish / French / German / Italian / Russian / Dutch and Turkish  
4. Press the Menu/OK button to confirm and exit.  
5. All the menu and device messages will now appear in the language that you selected.  
Frequency  
This function corrects the fluorescent light cycles for different countries. Using the camera in the  
USA the frequency must be set to 60Hz and using the camera in Europe the setting must be 50Hz.  
Note: If the LCD appears wavy this is a sign that you need to change the frequency.  
1. Press the Up/Down button to select the Frequency option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to select the frequency of your choice:  
50Hz / 60Hz  
4. Press the Menu/OK button to confirm and exit to the camera mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Format  
This function reformats the memory card and will erase all files in memory including files that have  
been protected, please operate cautiously.  
1. Press the Up/Down button to select the Format option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to select OK.  
4. Press the Menu/OK button to confirm. The following Format message will appear on the LCD.  
5. Press the Right/Left button to select Yes” to begin the format or Noto exit.  
6. Press the Menu/OK button to confirm and exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Default Setting  
If you are not sure as to what settings have been activated on your camera you can reset the  
camera to the original factory settings.  
1. Press the Up/Down button to select the Default setting option in the Setup menu.  
2. Press the Menu/OK button.  
3. Press the Up/Down button to select OK‟ to reset or „C‟ to cancel.  
4. Press the Menu button to confirm and exit.  
Cancel  
This is for you to exit the Setup menu manually.  
Select the Cancel option in the Setup menu and press the Menu/OK button to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Video Mode  
Move the mode switch to the center to activate the Video mode.  
The  
icon will appear on the top left corner of the LCD screen.  
1. Press the Shutter button to begin shooting videos. The elapse time will appear on the top  
right of the LCD screen.  
2. Press the Shutter button again to stop recording and save this file in AVI format (without  
voice).  
3. You can play this AVI file in playback mode or on your computer using the Vivitar Experience  
Image Manager software. Please read the section on “Minimum Computer Requirements for  
your operation system” in order to be properly utilize all the features of the application.  
Note:  
1.  
You need to insert an SD memory card for normal camera use.  
2.  
3.  
The limited internal memory in your camera is provided for test photos and videos only.  
Memory Full insert an SD Memory Card to Transfer and Shoot More Test Videoswill  
appear on the LCD when the memory storage capacity of your camera is full.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
 
White Balance  
You can select different White Balance for shooting.  
1. Press the Menu/OK button.  
2. Press the Left/Right button to select the White Balance menu option.  
3. Press the Up/Down button to select the White Balance you desire:  
Auto / Daylight / Cloudy / Incandescent / Fluorescent  
4. Press the Menu/OK button to confirm and exit to the video standby mode.  
5. The White balance effect you selected appears on the LCD screen.  
Video Resolution  
Your camera supports 2 video resolutions- 640x480 (VGA) pixels, 320x240 (QVGA) pixels.  
The default resolution is VGA.  
1. Press the Menu/OK button.  
2. Press the Left/Right button to select the Resolution menu option.  
3. Press the Up/Down button to select the resolution option you desire.  
VGA (640x480) / QVGA (320x240)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
4. Press the Menu/OK button to confirm.  
5. The corresponding resolution icon will appear on the right hand side of the LCD screen.  
Playback Mode  
Set the mode switch to the Playback mode. You can preview the photos and videos you have recorded.  
In Playback mode you can rotate, protect, delete and crop your photos and you can protect and delete  
video clips. You can also print photos directly from your camera using PictBridge technology.  
NOTE: The message, “No Image” will appear on the LCD screen if there are no photos/videos in the  
camera.  
Thumbnail and Zoom  
You can view the images on your camera as thumbnails. You can also press the T and W buttons to  
zoom in and out of your photos:  
1. Pressing the W button once will open the thumbnail display view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
 
2. Press the Right/Left button to move between the images.  
3. Press the T button to view the image in full screen.  
4. To Zoom in to the photo press the T button to magnify the photos and the W button to zoom  
out.  
5. Press the Up/Down/Right/Left button to navigate within the selected photo.  
Note:  
1. You cannot zoom in to AVI files.  
2. If you select an AVI file, an  
3. If you select a JPEG file, an  
icon will appear on the LCD  
icon will appear on the LCD screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
Playing the AVI video file  
Select an AVI file you want to play.  
1. Press the Shutter button to begin playing the AVI file.  
2. Press the Shutter button to pause and again to continue.  
3. Press the Up button to stop and exit the video playback mode for selecting files or wait until the  
file playback over.  
Note: For how to protect or delete video please refer to the relevant section in the Edit photos and  
videos section below.  
Edit photos and videos  
Select a still photo you want to rotate, protect, delete, crop or print. Select a video you want to  
protect or delete.  
Rotate  
1. Press the Menu/OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
2. Press the Right/Left button to select the Rotate menu option.  
3. Press the Up/Down button to select the degree you want to rotate your photo or cancel to exit.  
4. Press the Menu/OK button to confirm.  
5. A Rotate and Savingmessage will appear on the LCD. After a few seconds the photo will appear  
rotated as per your choice.  
Protect  
You can protect your photos and videos from accidental deletion.  
1. Press the Menu/OK button.  
2. Press the Right/Left button to select the Protect menu option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
3. Press the Up/Down button to select the Lockoption.  
4. Press the Menu/OK button to confirm and exit.  
5. A lock icon  
will appear on that image when it appear on the LCD.  
6. To unlock a locked image, press the Menu/OK button.  
7. At step 3 select Unlockand press Menu/OK to unlock the current file.  
Delete  
Delete unwanted photos and videos at any time to free up memory. You can delete one image or video  
clip at a time or delete all the unprotected photos and videos that are currently recorded on the memory  
card at once. Remember to download images frequently to the computer.  
1. Press the Menu/OK button.  
2. Press the Left/Right button to select the Delete menu option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
3. Press the Up/Down button to select:  
This image” (photos) or “This Video” (videos) depending on the file selected to delete the  
current photo or video  
ALL” to delete all unprotect photos or videos  
Cancelto exit.  
4. Press the Menu/OK button.  
5. The Delete confirmation message will appear to confirm the deletion.  
6. Press the Right/Left button to select Yesor Noif you delete one or all photos and videos.  
7. Press the Menu/OK button to confirm and exit.  
Crop Image  
Crop your photos to show only a specific portion of an image or to highlight certain focal points.  
The Crop feature lets you zoom in on an image and then save that part of the image as a new  
photo. The crop feature will only work if a SD card is inserted.  
1. Press the Menu/OK button.  
2. Press the Left/Right button to select the Crop menu option.  
3. Press the Up/Down button to select Crop or cancel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
4. Press the Menu/OK button.  
5. The Crop feature opens.  
6. Press the T/W buttons to out change the size of the rectangle (the area you will crop).  
7. Press the Up/Down/Right/Left button to move the rectangle to select the area of the photo you  
want to crop.  
8. Press the Shutter button.  
9. Press the Shutter button again to Save.  
Note:  
At step 6&7, you can press the Menu/OK button to exit without cropping.  
Print  
You can print photos directly from the camera using the Pictbridge technology on your printer.  
1. Select a photo you want to print.  
2. Press the Menu/OK button.  
3. Press the Left/Right button to select the Pictbridge menu option.  
4. Press the Up/Down button to select Pictbridge.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
5. Press the Menu/OK button to confirm.  
6. A Please connect to devicemessage will appear on the LCD.  
7. Connect your camera with the USB cable to the Printer`s Pictbridge USB socket.  
8. The following menu will appear once the camera detects that it is connected to the printer:  
9. Press the Up/Down button to select the This Imageoption and press the Menu/OK button.  
10. Select the Select Imageoption to select more than one photo for printing.  
11. Select OKand press the Menu/OK button to start printing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
12. Wait for the printer to process your request. After a moment the photo is printed.  
Note: Printing many photos will take more time. Please be patient and wait for all the photos to  
print.  
13. When the print is finished, a Print Finished screen appears. Press the Menu/OK button to close  
and revert back to the Playback menu mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Install the Vivitar Experience Image Manager Software  
You must be connected to the internet to install and run the Vivitar Experience Image Manager  
software.  
1. Insert the installation CD into your CD-ROM drive. The installation screen should  
automatically open.  
2. On PC: The Vivitar Experience Image Manager Installer window appears. If the window does  
not appear, open the application‟s CD/DVD drive and click on “Setup.exe” to launch the  
installer.  
3. On Macintosh: Click the icon to install the Vivitar Experience Image Manager.  
4. If you do not have internet access at the time of inserting the CD-ROM, connect to the  
internet and then click the “Install Vivitar Experience Image Manager” button to begin the  
installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
 
Note: If you do not have internet access, you can still download media from the camera.  
Click the “How to transfer photos and videos from my camera to my computer” button for  
instructions.  
5. If you have internet access, the “Choose your language” window opens, choose your  
language and click “Next” to open the next window.  
6. Select your camera model from the list and click “Next” to open the next window.  
7. Click “Next” to confirm your camera model selection and to install the application.  
8. Please wait while the application is being installed on your computer.  
9. Please review the license terms.  
On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click  
“Next” to continue.  
10. On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where  
the program will be installed, and then click “Install”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
11. Please wait while the application continues the installation process on your computer.  
12. On PC: Click the “Close” button when the installation is complete.  
On Macintosh: Click the “Quit” button when the installation is complete.  
13. Click the “Launch Vivitar Experience Image Manager” to open the application or close the  
window and run the Vivitar Experience Image Manager from your computer.  
Connect your camera to the computer  
1. Use the USB cable that came with your camera to connect your camera to your computer.  
2. Turn on the camera.  
3. MSDC will appear on the LCD indicating that you are in the USB mode.  
4. The first time you connect the device to the computer you will have to wait a few seconds  
until the computer recognizes the device.  
Get photos and videos from your camera to your computer  
An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel  
the transfer of any files on their way to your computer.  
1. Select the “Get images” button from the Main menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
   
2. The “Get media from device” window opens.  
3. You can select to download photos, videos or both.  
4. Select your camera (removable disk) from the device window. If your camera is the only USB  
device connected then it will be selected automatically.  
5. Select a location on the computer where to place the new photo and video files.  
6. Add the new photo and video files to albums if desired.  
7. Select to remove the media files from the selected device (removable disk) after the import.  
8. Click the “Get media” button to transfer the photos and videos from your camera to your  
computer.  
A media download progress bar appears on the bottom left showing the number of media  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
files downloading to your computer. A message appears when the download is complete.  
9. The photo and video files that you selected are now downloaded to your computer to the  
selected folder and albums ready for your use.  
Get started!  
Using the Vivitar Experience Image Manager, you can upload and manage photos and videos to  
and from the most popular photo sharing and social networking sites - Facebook, Flickr, MySpace,  
Picasa, Photobucket and YouTube. Seamlessly transfer photos and videos from one social  
network to another. Organize your images by creating offline and online albums. Edit images  
using automatic and manual tools. Use automatic “Geotagging” with built in Google Maps.  
For more details on how to use the Vivitar Experience Image Manager open the Help file or  
click the “Take the Tour” button on the application`s Home page.  
Transfer media from my camera to my computer manually (Using  
Windows)  
1. Use the USB cable that came with your camera to connect your camera to your computer.  
2. „MSDC‟ appears on the LCD indicating that the camera is in Mass Storage mode.  
3. A window appears on your computer with a list of options, select Open folder to view files  
and click OK.  
4. Open the DCIM folder and the folder inside to view the media files.  
5. Select the media and copy the files from this folder into your computer. Optionally, select the  
files and choose Copy from the Edit menu. Then select a folder and choose Paste from the  
Edit menu.  
6. We recommend that you copy the images into the Pictures/My Pictures folder and the videos  
into the Videos/My Videos folder.  
7. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on  
their way to your computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
   
Transfer media from my camera to my computer manually (Using  
Macintosh)  
1. Use the USB cable that came with your camera to connect your camera to your computer.  
2. „MSDC‟ appears on the LCD indicating that the camera is in Mass Storage mode.  
3. The camera‟s device icon appears on the desktop.  
4. Click on the device icon and open the DCIM folder and the folder inside to view the media  
files.  
5. Select the files and drag them into your computer. Optionally, select the files and choose  
Copy from the Finder‟s Edit menu. Then select a folder and choose Paste from the Edit  
menu.  
6. We recommend that you copy the images into the Pictures folder and the videos into the  
Movies folder.  
7. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on  
their way to your computer.  
Maintenance of Your Digital Camera  
The digital camera is a delicate device.  
Please handle your camera with care to avoid damaging it.  
Sakar Warranty Card  
This warranty covers for the original consumer purchaser only and is not transferable. Products that fail  
to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your  
product will be repaired at no charge for parts or labor for a period of one year.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
     
What Is Not Covered By Warranty:  
Damages or malfunctions not resulting from defects in material or workmanship and damages or  
malfunctions from other than normal use, including but limited to, repair by unauthorized parties,  
tampering, modification or accident.  
What To Do When Service Is Required:  
When returning your defective product (postage pre-paid) for service, your package should include:  
1. Copy of original bill of sale  
2. A detailed written description of the problem.  
3. Your return address and telephone number (Daytime)  
MAIL TO ADDRESS BELOW:  
Sakar International  
Attention: Service Department  
195 Carter Drive  
Edison, NJ 08817  
Technical Support  
For technical support issues please visit our website at www.vivitar.com. You can find manuals,  
software and FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at  
[email protected] and one of our technical support team members will answer your questions. For  
phone support in the US please call 1-800-592-9541, in the UK call 0800 917 4831. If you would like  
to call from anywhere else, please visit www.vivitar.com for your local toll free number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
 
Appendix A: Technical Specifications  
Image Sensor  
Image Size  
CMOS Sensor  
3264X2448pixels(8M), 2560X1920pixels(5M), 2048X1536 pixels(3M),  
1600X1200pixels(2M), 1280X960pixels(1M) 640X480(VGA)  
640X480(24 fps),320X240pixels(30 fps)  
JPEG/AVI(Without Audio)  
SD / MMC Card (up to 8GB)  
Video Resolution  
File Format  
External Memory  
LCD Display  
Lens  
2.4 Inch TFT LCD  
f=7.45mm, F3.0 (with Macro)  
Zoom  
4X Digital Zoom  
Exposure  
-3.0EV ~ 3.0EV  
White Balance  
ISO  
Auto, Daylight, Cloudy, Incandescent, Fluorescent  
Auto/100/200/400  
Auto/Night Portrait/Night Scenery/ Portrait/Scenery/Sport  
Party/Beach/High Sensitivity  
Scene (Camera Mode)  
Flash  
Auto /Force/Off  
Self-timer  
2 or 10 sec delay  
Anti-Shake  
PictBridge  
Interface  
Yes  
Yes  
USB 2.0 High Speed  
System Requirements  
Battery  
Windows XP/VISTA/ Mac OS X (10.4.6 or higher)  
3XAAA(4.5V)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
 
Appendix B: Troubleshooting  
Q: I have taken photos but my computer does not recognize my camera. What do I do?  
A:  
First, ensure that you have in fact taken photos. Press the Shutter/OK button a few times to take some  
sample photos and then try downloading them again.  
It is also recommended that you have an SD card inserted in the camera.  
Secondly, always use the USB cable that came together in the package with the camera.  
The USB cable needs to be inserted in a free USB slot on your computer.  
Thirdly, give your computer time to recognize that the device is inserted. If need be, refresh the device  
options list until you see the removable device appearing.  
If the computer does not recognize your device it may mean that your computer does not meet the  
minimum system requirements.  
Please see the System Requirements section of this manual. If your computer does not match these  
requirements then it is possible that you will not be able to transfer the photos and videos from your  
camera.  
Q: I can not use the flash function.  
A:  
Please make sure you are in camera mode and that the Macro setting is set to the Far mode.  
You may not have enough battery power to operate the flash function. Check the battery power and  
change your batteries if needed.  
Q: Will my camera work with a Macintosh computer?  
A: Yes. You can download photos and videos using the application on Windows as well as Mac  
A04-051209GES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
 

Thule Automobile Accessories Kit 2019 User Manual
TiVo DVR Introduction 92 User Manual
Toastmaster Coffeemaker TCM4R User Manual
Toshiba CRT Television 32AF53 User Manual
Triarch Indoor Furnishings 33212 User Manual
Univex Blower 113171500 User Manual
Vector Work Light VEC118S User Manual
Velodyne Acoustics Speaker CHT 8R User Manual
Vermont Casting Gas Grill VCS5027 User Manual
Vita Mix Blender 1442 User Manual