Visioneer Strobe XP 450
USB Scanner
Installation Guide
F O R W I N D O W S
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
The Visioneer Strobe XP 450 Scanner . . . . . . . . . . . . . . . . . . . . . . . . 2
What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Step 1: Assemble the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Step 2: Connect and Power On the Scanner . . . . . . . . . . . . . . . . . . . 6
Step 3: Install the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 4: Connect the USB Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting New Settings for the Scanner Button . . . . . . . . . . . . . 15
Creating a New Button Configuration . . . . . . . . . . . . . . . . . . . . 16
Editing Button Configurations . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setting Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting the Image with the Scan Manager . . . . . . . . . . . . . . . 28
Adjusting the Image Type, Resolution, Brightness and Contrast 28
Adjusting the Output Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the Scan Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
Adjusting Color and Gray Images . . . . . . . . . . . . . . . . . . . . . . . 36
Adjusting Color Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adjusting the Scanner’s Power Saving Time . . . . . . . . . . . . . . . 44
Scanning from Windows Me or XP . . . . . . . . . . . . . . . . . . . . . . . . . 45
Step 1: Uninstalling the Visioneer OneTouch Software . . . . . . . 55
Step 2: Uninstalling the PaperPort Software . . . . . . . . . . . . . . . 56
Visioneer Strobe XP 450 Scanner Specifications . . . . . . . . . . . . . . . 57
Visioneer Strobe XP 450 Scanner Parts List . . . . . . . . . . . . . . . . . . . 58
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
1
WELCOME
black and white documents and place their images on your computer.
Warning: Do not plug in the USB cable until after you have installed
the software. Carefully follow the steps and sequence described in the
installation procedure beginning on page 5.
WHAT’S IN THE BOX
Before proceeding, check the contents of the box. If items are missing or
damaged, contact the dealer where you purchased the scanner.
Installation Guide and
Quick Install Card
Strobe XP 450 Scanner
Software CD
Paper Guide
Output Tray
Power Cord
Power Supply
USB Cable
Download from Www.Somanuals.com. All Manuals Search And Download.
2
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
THE VISIONEER STROBE XP 450 SCANNER
Paper guide
Scanner button
Status light
Output tray
Output tray extension
ADF cover release
Power switch
Power jack
USB port
Paper guide—Holds documents in place. Adjusts to fit the document size.
Scanner button—Starts scanning using the scan settings button.
Status light—Shows the scanner’s status. A flashing green light indicates the scanner is
preparing to scan. A steady green light indicates the scanner is ready to scan. Refer to the
Troubleshooting section for additional details.
Output tray—Holds documents after scanning through the ADF.
Output tray extension—Unfolded when scanning legal-sized documents.
ADF cover release—Opens the cover on the automatic document feeder.
Universal Serial Bus (USB) port—Connects the scanner to the computer.
Power jack—Connects the power cord to the scanner.
Power switch—Turns the scanner’s power on and off.
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT YOU NEED
3
WHAT YOU NEED
An IBM-compatible PC with:
I A CD-ROM drive
I An available Universal Serial Bus (USB) port
I Microsoft Windows operating system: 98, 2000, Me, or XP
I Available internal memory (RAM) as follows:
I 64 megabytes (MB)
I Windows XP—128 MB
I 200 MB of free hard disk space
Note: The new USB 2.0 ports operate at higher speeds than USB 1.1
ports. If your computer is not equipped with USB 2.0 ports, you can
add them with the Visioneer Hi-Speed USB 2.0 PCI Card. Visit the
contact the dealer where you purchased your Visioneer XP 450
OneTouch USB scanner. However, you do not have to add USB 2.0
ports to the computer. Your scanner automatically works with both
USB 1.1 and USB 2.0 ports.
A VGA Monitor
Recommended settings for your monitor are as many colors as
possible—High Color (16-bit), True Color (24-bit or 32-bit). Set the
resolution to at least 800 by 600 pixels.
To set your monitor’s colors and resolution, open the Windows Control
Panel, double-click Display, and then click the Settings tab.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
DOCUMENTATION
Your scanner is delivered with the following documentation:
I Quick Install Card—abbreviated installation instructions.
I Visioneer Strobe XP 450 Scanner Installation Guide—on the
Installation CD; contains detailed installation, scanning,
configuration, and maintenance information.
I ScanSoft PaperPort User’s Guide—on the Installation CD; contains
detailed feature and configuration information.
I Online Help—for the scanner configuration, Visioneer Scan
Manager, and PaperPort software applications.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: ASSEMBLE THE SCANNER
5
Installation
Warning: Do not plug in the USB cable until after you have installed
the software. Complete the installation steps in the order described in
the installation procedure below.
Installation is a quick, four-step process:
1. Assemble the scanner
2. Connect and power on the scanner
3. Install the software
4. Connect the USB cable to your computer
STEP 1: ASSEMBLE THE SCANNER
To assemble the scanner:
1. Remove all shipping tape from the top and bottom of the scanner.
2. Align the slots on the paper guide with the ridges on the scanner
and slide it down until it snaps into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
3. Insert the pins on each side of the output tray into the holes on the
scanner.
4. Proceed to “Step 2: Connect and Power On the Scanner”.
STEP 2: CONNECT AND POWER ON THE SCANNER
Before installing the software, connect the power supply and power
cord, and then turn the power on.
To connect your Visioneer Strobe XP 450 scanner:
1. Plug the power supply into the power port on the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: INSTALL THE SOFTWARE
7
2. Plug the power cord into the power supply and into a wall outlet.
3. Turn on the power switch, located on the back of the scanner to the
left of the power port.
The status light comes on and flashes indicating that the scanner is
receiving power.
STEP 3: INSTALL THE SOFTWARE
Note: You must install the software before connecting the scanner to
your computer. Otherwise, the correct driver software for your
scanner will not be installed and it may not work properly.
To install the software:
1. Start Microsoft Windows and make sure no other applications are
running.
2. Insert the CD into your computer’s CD-ROM drive.
The CD automatically starts.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
Note: If the CD does not start, check the following:
I Make sure the CD drive’s door is completely shut.
I Double-click the My Computer icon on your Windows desktop.
Double-click the icon for your CD-ROM drive. From the list of
files on the CD, double-click the file named START32.EXE.
3. On the installation menu, select Install ScanSoft PaperPort and
Scanner Driver.
If a message window opens instructing you to restart your
computer, click Restart.
4. On the PaperPort 9.0 Welcome window, click Next.
5. On the License Agreement window, read the ScanSoft license
agreement. If you accept the terms, select I accept the terms in the
license agreement, and then click Next.
6. On the Customer Information window, accept the current values or
enter new information, and then click Next.
7. On the Setup Type window, click Next.
8. Click Install to begin the installation.
9. On the Product Registration window, do one of the following:
I Select Register online, click OK, and then follow the
registration instructions.
I Select Print registration form, click OK, and then follow the
instructions to complete and print the registration form.
I Select Remind me in 7 days and click OK.
10. On the Visioneer License Agreement window, read the license
agreement. If you accept the terms, select I Agree, and click Next.
11. On the Visioneer Product Registration window, complete the
required information, and then click Register.
12. On the Welcome window, click Next to start the installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
13. When you see the Connect Scanner window, do NOT click Finish.
Leave the window open and proceed to the next section, “Step 4:
Connect the USB Cable”.
STEP 4: CONNECT THE USB CABLE
The Visioneer Strobe XP 450 scanner connects to any available USB
port. Check your computer’s manual for USB port locations.
Note: You can connect the scanner to your computer while the
computer is running. You do not have to shut down your computer.
1. Plug the USB cable into the USB port on the scanner and then a
USB port on the computer. The ports are identified USB symbols.
USB
Download from Www.Somanuals.com. All Manuals Search And Download.
10
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
Note: You can also connect the scanner to a USB port on the
computer’s keyboard if it has one, or to a USB hub. If you use a USB
hub, it must have its own power supply already plugged into an
electrical outlet.
Note: If you have not installed the software, unplug the USB cable
from the computer and install the software now. When the software
installation is complete, a message tells you to connect the scanner.
Note: If you are using Windows XP and have plugged the USB cable
into a USB 1.1 port, an information bubble opens explaining that “A
HI-SPEED USB device is plugged into a non-HI-SPEED USB hub”.
Plug the USB cable into a USB 2.0 port (if available) or disregard the
message. Refer to the Note on page 3 of this guide for more details.
Your computer recognizes that a scanner has been plugged into the
USB port and automatically loads the appropriate software from
the CD to run the scanner.
2. When the software is finished loading, return to the Connect
Scanner window and click Finish.
The scanner’s status light is green when the scanner and computer
are communicating properly.
3. On the Install Completed window, click Finish.
4. When installation is finished, restart your computer.
5. If you removed the CD from the CD drive and want to install
other software, reinsert the CD into the drive.
In addition to installing the other software from the CD, you can
also view and print the User Guides and Installation Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
LOAD AND SCAN DOCUMENTS
11
Scanning with the
Scanner Button
When you press the scanner button, your document is scanned using
predefined scan settings and then the image is sent to a software
application on your computer. To change scan settings, see
“Configuring the Scanner Button” on page 13.
LOAD AND SCAN DOCUMENTS
1. If you are scanning legal-sized documents, unfold the output tray
extension.
2. Adjust the paper guide for the size of paper.
Note: Remove any staples or paper clips from the documents before
loading them into the automatic document feeder. Staples and paper
clips can jam the feed mechanism.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
3. Load the documents face down, with their tops into the automatic
document feeder.
4. Press the button on the scanner.
A scan progress window opens and then a thumbnail of the scanned
image appears in the destination software. In the following
example, the destination software is the PaperPort desktop.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE SCANNER BUTTON
13
CONFIGURING THE SCANNER BUTTON
When you first connect your scanner to a computer, the scanner’s
OneTouch software is configured to scan in black and white and send
the scanned image to the PaperPort desktop. You can change the
settings by selecting new options from the Configuration dialog box.
To open the Configuration dialog box:
1. On the Windows taskbar, click Start, point to Programs, point to
ScanSoft PaperPort 9.0, and then click OneTouch Configure.
2. If not already selected, click the Scan tab on the Configuration
dialog box to display available scanning configurations.
ABOUT THE CONFIGURATION DIALOG BOX
The Configuration dialog box manages settings for the scanner button.
In the following figure, the button is set to scan with the configuration
named Scan Document and then open PaperPort to display the scanned
image. The Format and Page(s) option is set is to scan in the PaperPort
image format.
Click to set
preferences.
Select a setting
for scanning
the item.
Select a software
application to
sendthescanned
document to.
Select format
Download from Www.Somanuals.com. All Manuals Search And Download.
14
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
The options on the Configuration dialog box are:
Select Destination—the list of applications that can open to display
the scanned image. To configure the list of available applications, click
the Preferences tab at the top of the dialog box and select the desired
option. See “Setting Preferences” on page 20 for more information.
Select Configuration—the list of available configurations. The
configuration settings include: scanning mode, resolution, page size,
contrast, and brightness. To see a selected configuration’s settings, click
its icon. Click the icon again to close the detailed information.
Clicktheiconofaselected
configuration to view its
settings.
The icons next to each Configuration indicate the scanning mode:
Color
BlackandWhite Grayscale
You can also click the View button to see more detailed information
about the selected configuration.
Select Format and Page(s)—a set of format for the scanned image. The
formats are bitmap and PaperPort. Bitmaps are usually used for photos
or artwork. The bitmap format is available when you select a
destination application other than PaperPort.
Options—displays a dialog box for selecting options related to the
selected destination application for the scanned image. Each destination
application has its own options dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE SCANNER BUTTON
15
SELECTING NEW SETTINGS FOR THE SCANNER BUTTON
You can select a new destination application, scanning configuration,
and image format to use when you press the scanner button.
To select new settings for the Scanner Button:
1. From the Select Destination list, select the application where you
want scanned images sent.
See “Setting Preferences” on page 20 to display a full list of the
destination applications that you can use with the scanner.
Note: If you select a word processing program such as Microsoft
WordPad or Microsoft Word and a configuration for OCR, the text
in scanned images is automatically converted to word processing text
by the optical character recognition (OCR) software that you receive
with the scanner. The converted text then appears in the selected
destination application.
2. From the Select Configuration list, select a scan configuration.
To scan in color, select one of the configurations indicated by the
small color icon, such as the Scan Color Document configuration.
The configuration list is preset for the application you select in the
Select Destination list. If you select a different application, the
configurations are for that application.
3. Select a Format and Page(s) option.
4. Click OK.
Now when you press the scanner button, the document is scanned
using the new settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
CREATING A NEW BUTTON CONFIGURATION
You cannot change settings of the preset (default) configurations. To use
settings other than those offered by the preset configurations, you must
create a new configuration. You can do this either by copying a preset
configuration and making the desired changes or by creating a new
configuration from scratch.
To create a new configuration:
1. Scroll the applications in the Select Destination list and click the
application for which you want to create a new configuration.
2. Do one of the following:
I Click the New button.
I Select a preset configuration and click the Copy button.
3. On the New Scan Configuration dialog box, type a name.
I If you are copying from a preset configuration, leave the name as
is or change it as required.
Note: If you select a printer or other device in the Select
Destinations list, the dialog box may have an additional tab for
setting specific options for the particular device.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE SCANNER BUTTON
17
4. Select scan settings for the new configuration.
Mode—Select a scanning mode as follows:
I Black/White to scan in black and white. For example, letters and
memos are usually scanned in black and white.
I Grayscale to scan items such as documents containing drawings
or black and white photographs. The scanning produces an
image in varying shades of gray.
I Color to scan color photographs and other color items.
Resolution—Drag the slider to the right or left to adjust the dots
per inch (dpi) of the resolution. The maximum resolution is 600
dpi; the minimum is 100 dpi. The higher the dpi setting, the
sharper and clearer the scanned image. However, higher dpi settings
take longer to scan and produce larger files for the scanned images.
Brightness and Contrast—Drag the sliders to the right or left to
adjust the brightness and contrast of the scanned image. The
Contrast setting does not apply to the Black/White mode.
5. Click the Page Settings tab to select page settings.
Page Size—Click a page size from the drop-down list. The outlines
on the picture represent the various page sizes. Clicking one of
those outlines also selects it as the page size for the scan. If you
Download from Www.Somanuals.com. All Manuals Search And Download.
18
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
select the Custom option from the drop-down list, boxes appear in
place of the picture. Enter the horizontal and vertical page
dimensions in the boxes.
AutoCrop—This option lets the scanner automatically determine
the size of the item being scanned. For example, if you scan an
unusual page size, the scanner will automatically determine the size
of the page.
DeScreen—Select this option when scanning a picture from a
newspaper or magazine article, or other items that contain images
with patterns or dots. These patterns and dots sometimes cause a
wavy appearance for which the Descreen option can compensate.
The following example shows the effect of descreening a scanned
image from a magazine article.
Original Image
Descreened Image
The scanning may slow down a bit when descreen is selected. The
DeScreen setting does not apply to the Black/White mode.
Gamma—Drag the slider to improve how the colors in a scanned
image look on your monitor. Gamma correction allows you to
achieve precise color matching. Because the computer cannot
always transmit the exact color information to the hardware, you
may have to make some color adjustments using the Gamma
feature.
The default Gamma setting works fine in most cases and normally
does not need to be adjusted.
6. Click OK to save the new configuration.
On the Configuration dialog box, make sure the configuration you
just defined is selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE SCANNER BUTTON
19
7. To set the new configuration for use by the scanner button, select
the configuration and then click OK.
EDITING BUTTON CONFIGURATIONS
You cannot edit the preset button configurations; you can only edit
those configurations that you created yourself.
To edit a configuration:
1. Open the Configuration dialog box.
2. Select the configuration you want to edit. The selection must be a
configuration you created.
3. Click the Edit button.
The Edit Scan Configuration dialog box opens.
4. Edit the settings as required and click OK.
5. Click OK to close the Configuration dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
SETTING PREFERENCES
You can set general preferences for button and scanner functions.
To set preferences:
1. Open the Configuration dialog box and click the Preferences tab.
Preferences tab
2. Select button preferences as described below.
Show All Destinations—This option selects all the destination
application categories. The list of destination applications on the
Configuration dialog box will include all the applications on your
computer that fall into these categories. This is the default selection
when the OneTouch AutoScan software is installed. The list also
includes printers and other devices connected to your computer so,
for example, you can scan an item and have it printed immediately.
Select Destinations—Select this option to individually choose the
types of applications to include in the list of destination
applications. Check the boxes for the type of application to include.
Show Scan Progress Window—Select this option to display a
progress window of the document during scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE SCANNER BUTTON
21
3. Click the General tab to set a temporary folder.
Folder for Temporary Images—Click the Folder button and then
select a folder for the scanner’s temporary images. During scanning,
a temporary file contains scan information about the image.
Because temporary image files can sometimes be large, select a
folder that has sufficient disk space available.
4. Click OK to save the AutoScan preferences.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
Scanning from
PaperPort
Instead of using the scanner button, you can scan from the PaperPort
software application. Use this method if you want to preview an image
and adjust scanning settings prior to scanning.
YOUR SCANNER AND THE TWAIN STANDARD
Your scanner uses the TWAIN standard for scanning. TWAIN is a
widely recognized methodology that computers use to receive images
from scanners, digital cameras, and other digital devices. The PaperPort
software application that you received with your scanner uses the
TWAIN standard, and this guide shows how to scan with it. Many
other graphics and imaging applications also comply with the TWAIN
standard, so you can use your scanner with those applications too. To
use your scanner with other TWAIN-compliant software, please refer to
their user guides.
IF YOUR COMPUTER IS RUNNING WINDOWS ME OR XP
Instead of using the TWAIN standard, your scanner can also use
Microsoft’s Windows Image Application (WIA) standard for scanning,
which is also available from other applications. Therefore, you can use
your scanner with other applications on a computer running Windows
Me or XP too. See “Scanning from Windows Me or XP” on page 45.
Download from Www.Somanuals.com. All Manuals Search And Download.
LOAD DOCUMENTS INTO THE DOCUMENT FEEDER
23
LOAD DOCUMENTS INTO THE DOCUMENT FEEDER
1. If you are scanning legal-sized documents, unfold the output tray
extension.
2. Adjust the paper guide for the size of paper.
Note: Remove any staples or paper clips from the documents before
loading them into the automatic document feeder. Staples and paper
clips can jam the feed mechanism.
3. Load the documents face down, with their tops into the automatic
document feeder.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
The instructions in this section are for scanning with the TWAIN
software on computers running Windows 98, Me, 2000, or XP. If your
computer is running Windows Me or XP and you want to use the WIA
software, see “Scanning from Windows Me or XP” on page 45.
To scan an item from PaperPort:
1. On the Windows taskbar, click Start, point to Programs, point to
ScanSoft PaperPort 9.0, and then click PaperPort.
The PaperPort desktop opens.
Scan icon
2. Click the Scan icon on the PaperPort command bar.
The Folders pane (which shows folders for organizing your scanned
images) is replaced by the Scan pane.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
25
Scan pane
Opens the Scan Manager
3. From the Scanner drop-down list, select Strobe XP 450.
4. In the “Scan what?” section, choose to scan a Document or
Photograph.
5. Click Settings to view and change the format for the scanned item’s
file name and the file type. The default file type for documents is
.pdf and the default for photographs is .jpg.
6. Use the Single page itemscheck box as follows:
I When the check box is selected, all pages in the document feeder
are scanned and placed in a stack on the PaperPort desktop.
I When the check box is not selected, all pages in the document
feeder are scanned, but not placed on the PaperPort desktop
until you close the Scan Manager and indicate the scanning job
is finished.
7. Click the Scan button on the Scan pane.
The Scan Manager opens. Use the Scan Manager to select scanning
options and to start the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
scanning its final image, click the Preview button.
The scanner scans a preview of the item and displays it in the Scan
Manager. You can now use the options on the Scan Manager to
fine-tune the image. For details on adjusting images, see “Adjusting
the Image with the Scan Manager” on page 28.
Note: If you preview when scanning a stack of documents, the first
page of the stack feeds through the ADF for the preview. After
adjusting the scanner settings, replace the page on the stack so it is
scanned with the rest of the pages.
9. To preview the item with the new settings, click the Preview
button again on the Scan Manager.
10. When you are satisfied with the preview image, click Scan.
If the Single page items check box is selected on the PaperPort
desktop, the item appears as a thumbnail on the desktop.
11. If the Single page items check box is not selected, thumbnails do
not appear until you indicate the scanning job is finished.
I Close the Scan Manager.
I On the PaperPort - Scan message box, click Done.
Note: Refer to “The Single Page Items Check Box” on page 27.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
27
Athumbnailimageofthe
scanned item appears on
the PaperPort desktop
Thumbnailimagesofastack
of documents scanned with
the ADF.
ON THE PAPERPORT DESKTOP
I By default, the name of the scanned image is the day, date, and
number of scanned items that day. For example, the second item
scanned on a day is followed by a (2), the third by a (3) and so on. To
change a name, click it to select its text and type a new name.
I The thumbnail images of the stack of documents has “go to page
arrows” so you can click through the pages in the stack. The page
counter next to the scroll arrows shows which page you’re viewing
and the total number in the stack.
THE SINGLE PAGE ITEMS CHECK BOX
The Single page items check box provides the option to add additional
items to a scanning job and scan double-sided items. If the check box is
selected, scanned items immediately appear on the PaperPort desktop.
If the check box is not selected (this is the default), the following
message box appears when you close the Scan Manager.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
I Click Scan More Pages to scan additional pages and add them to the
stack of items placed on the PaperPort desktop.
I Click Scan Other Side to reload and scan the other side of
previously scanned pages. This option is only available once.
I Click Done if you are finished scanning. The scanned items are
placed on the PaperPort desktop.
To learn more about the PaperPort software please see the ScanSoft
PaperP ort User’s Guide on the Installation CD.
ADJUSTING THE IMAGE WITH THE SCAN MANAGER
The Scan Manager has a wide variety of options to adjust your scanned
images. Using those options you can produce the best possible scan of
your documents, color photos, magazine articles, business cards, or any
other items you scan.
ADJUSTING THE IMAGE TYPE, RESOLUTION, BRIGHTNESS AND CONTRAST
The Scan Manager’s drop-down lists and sliders are used to adjust the
image type, resolution, brightness, and contrast.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
29
Image Type
Resolution
Brightness
Contrast
IMAGE TYPE
From the Image Type drop-down list, select the appropriate image type
for the item(s) you’re scanning:
I Black and White—scans in black and white. The scanning pixels
are all the same size and are either black or white. Use this setting
for letters, memos, pen and ink drawings, and other black and
white material. This setting produces the smallest file size for
scanned items.
I Halftone—scans the image so it appears to consist of gray tones.
A pop-up menu appears so you can choose one of the halftone
options. Notice that the preview image changes as you select each
option so you can see which one is best for scanning. Halftones
produce simulated gray tones by using black and white pixels of
different sizes and is often used to produce newspaper and
magazine images. Use this setting for lower resolution black and
white images. The halftone settings also produce small file sizes.
Halftone Example
Download from Www.Somanuals.com. All Manuals Search And Download.
30
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
I 8-Bit Gray—scans the image using up to 256 true shades of gray.
Use this setting to scan black and white photographs and other
higher quality black and white images. You can also scan a color
photo with this setting to turn its colors into gray shades. The file
size is about one third the size of a color scan.
I 24-Bit Color—scans the image in full color. Use this setting to
scan color photographs and other color images. The file size is the
largest of the image type options.
I Enhanced bit-depths—If you are using an imaging application
other than PaperPort, the image type drop-down list will include
16-Bit Grayscale and 48-Bit Color. These image types are only
available if the imaging application supports them. You will
receive an error message if the application does not support the
selected enhanced bit-depth.
Note: You can see the file size at the bottom of the Scan Manager.
RESOLUTION
Resolution determines the amount of detail you can see in the scanned
image. The resolution setting for a scan is in dots-per-inch (dpi). The
higher the resolution, the finer the details, however, higher dpi settings
also take longer to scan and produce larger files sizes. Usually the higher
resolution settings are used for precision work, such as photographs or
fine artwork.
I Click the Resolution drop-down list and select a resolution.
The resolution settings on your Strobe XP 450 scanner range from
100 dpi to 2400 dpi.
BRIGHTNESS AND CONTRAST
Sometimes an item is scanned with the brightness and contrast set too
light or too dark. For example, a note written with a light pencil may
need to be scanned darker to improve legibility.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
31
Brightness refers to the lightness or darkness of the image. Contrast is
the range between the darkest and lightest portions of the image. The
greater the contrast, the more the difference between the lighter and
darker shades in the image.
I Dark/Light slider—adjusts the brightness of the scan. Drag the
slider to the right or left to increase or decrease the brightness.
I Low/High slider—adjusts the contrast. Drag the slider to the
right or left to increase or decrease the contrast.
ADJUSTING THE OUTPUT SIZE
The output size is the width and height of the image after it is scanned.
For example, if you plan to print the image on a piece of paper you can
select the output size of 8.5 by 11.0 inches.
Preview Auto-Area
Paper Size
Units
Ruler Units
PREVIEW AUTO-AREA
The item you’re scanning may not fill the scanning area. In that case
you can preview the item and use the Preview Auto-Area button to
automatically set the size of the scanned image.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
I Click the Preview Auto-Area button to let the Scan Manager
automatically determine the size of the item being previewed.
For example, if you preview the scan of a small photo, the Scan
Manager automatically determines that the scan area is only the
edges of the photo.
You can manually adjust the scan area. For example, if you want the
scan to include a border around the image, drag the edges of the scan
area box.
PAPER SIZE
If you know the size of the item(s) you’re scanning, set the paper size.
This automatically sets the scan size to the paper size.
I Click the Paper Size button and select the image’s paper size from
the list.
UNITS
The ruler around the edges of the image area and the output
dimensions can be displayed in inches, centimeters, or pixels.
I Click the Units button to select the units for the ruler. Clicking the
button toggles through the three choices. The ruler and output
dimensions change to the new units.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
33
SETTING THE SCAN AREA
You can manually adjust the output area to scan specific sections of an
image. For example, if you’re scanning a photograph and want to focus
on one section, manually setting the output size removes the rest of the
photograph from the final scanned image.
Move pointer
Manually set area
Resize pointer
Output Dimensions
To manually set an output area:
1. Put the mouse pointer on an edge of the scan area box so it
becomes a resize pointer (two-headed arrow) and then drag to set a
new size for the box.
2. To move the box, put the mouse pointer inside the box so the
pointer becomes a four-headed arrow. Drag to move the box to a
new position.
3. The output dimensions change to reflect the new scan area size.
Now, when you scan, only the area inside the scan area box is
scanned to the PaperPort desktop.
Note: If you want to reset the scan area to the full size of the image
again, click the Preview Auto-Area button.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
Here’s a sample of a manually selected output area:
This is the area manually
selected for scanning.
This is the image that appears
on the PaperPort desktop
when scanning is finished.
Lock Scaling
MANUALLY SETTING THE WIDTH AND LENGTH
The output dimensions at the bottom of the Scan Manager show the
Width and Length of the scan area. You can set the area by typing
numbers into those boxes.
To manually set the width and length:
1. Click in the Width or Length box and type a new dimension.
The scan area box changes to reflect the new size.
2. To maintain the same width to length ratio, click the Lock Scaling
icon next to the dimension.
With the Lock Scaling locked, when you type a new width or
length, the other setting changes so the relative size of the scan area
remains constant.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
35
REVERSING THE IMAGE
The Scan Manager has an Invert button and a Mirror button for
reversing the scanned image.
Invert
Mirror
Invert reverses the black and whites or the colors of an image.
Mirroring flips the image 180 degrees.
I Click the Invert or Mirror button to see the image you want.
Original Image
Inverted Image
Mirrored Image
Download from Www.Somanuals.com. All Manuals Search And Download.
36
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
ADJUSTING COLOR AND GRAY IMAGES
The Scan Manager has three buttons—Descreen, Sharpen, and Auto
Level—for adjusting color and gray images. These buttons are available
when the 24-Bit Color or 8-bit Gray Image Types are selected.
Descreen
Sharpen
Auto Level
DESCREEN IMAGE
Select this option when scanning a picture from a newspaper or
magazine article, sales catalog, or other source that contains images with
patterns or dots. Scans of patterns or dots sometimes have a distorted or
wavy appearance. The scanner scans the item to compensate for the
patterns and dots, and produces a clearer image. The scanning may slow
down a bit when this option is selected. You don’t need to select this
option when scanning photographs.
Original Image
Descreened Image
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
37
To descreen an image:
1. Click the Descreen button.
2. Choose the appropriate option from the list.
Watch the preview image as you select various options to see which one
is best for your final scanned image.
SHARPEN IMAGE
Sharpness determines the amount of blur in an image. Your scanner can
sharpen an original blurred image by adjusting the blurry edges in
sections of the image.
To sharpen an image:
1. Click the Sharpen button.
2. Choose the appropriate option from the list.
Original Image
Sharpened Image
Download from Www.Somanuals.com. All Manuals Search And Download.
38
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
AUTO LEVEL
Your scanner can analyze a color image to automatically determine the
best settings to match the colors of the original image. Click this button
to let the scanner automatically adjust the color settings.
Original Image
AutoLevelAdjusted
ADJUSTING COLOR SETTINGS
The buttons for manually adjusting a preview image’s color settings
offer several advanced color options. The availability of each option is
dependent upon the selected Image Type for the image.
Highlight/Shadow Levels
Curves
Color Balance
Hue/Saturation/Lightness
Color Drop-out
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
39
HIGHLIGHT/SHADOW LEVELS
Images have light and dark areas. The highlight is the lightest spot on an
image; shadow is the darkest spot. The range of colors between the
highlight and shadow determines the range of colors of the image. Use
the Highlight/Shadow Levels to extend the original range of colors
between the highlight and shadow to reveal more details in the
midrange colors.
To adjust the highlight and shadow levels:
1. Click the Highlight/Shadow button.
The dialog box shows a histogram of the saturation, gamma, and
hue (S, G, H) of the range of colors for the highlight and shadow.
Saturation is the strength or purity of a color, gamma controls the
brightness of the midtones of the color, and hue is the color your
eyes see as reflected from the image. The gamma setting in this
dialog box is in conjunction with the hue and saturation but you
can also set gamma by itself for an image. See the section “Curves,”
below for more information
2. From the Channel drop-down list, choose RGB to adjust all the
channels together, or choose a single channel if available.
3. Enter new settings in the boxes for the three levels, or drag the
small triangles at the bottom of the histogram.
The histogram changes to show the new levels.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
4. Click Preview to see the effect of the changes on the preview
image.
5. Click Reset to reset the levels to their original values.
6. Click OK when the levels are what you want.
CURVES
Like the Highlight/Shadow levels, the Curves feature also adjusts the
range of midtone colors on an image. However, with the Curves feature
you can set the gamma individually to adjust midtone levels without
losing details from the lightest or darkest areas.
To adjust the gamma curve:
1. Click the Curves button.
The dialog box that opens shows a plot of the gamma. The gamma
of the original image is represented by a straight line from the lower
left to upper right corners. Changing the straight line to a curve
changes the gamma setting for the midtones on the original image.
2. From the Channel drop-down list, choose RGB to adjust the
gamma of all the channels, or choose a single channel if available.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
41
3. Drag the line up or down to set a new gamma.
The input and output values represent values on the horizontal and
vertical axes for the new gamma setting. Click the Curve or Line
button to see the display as a smooth curve or a line. You can drag
the line at multiple points.
4. Click Preview to see the effect of the changes on the preview
image.
5. Click Reset to reset the levels to their original values.
6. Click OK when the levels are what you want.
COLOR BALANCE
The color balance refers to the relative amounts of the three primary
colors in an image. By adjusting the color balance you can sometimes
compensate for an image with too much or too little of a color.
To adjust the color balance:
1. Click the Color Balance button.
The settings in the dialog box are initially set to zero for each of the
colors, indicating no change to the original image’s color balance.
2. Type a number in one or more of the Color Levels boxes to set a
new color level, or drag the triangles to the left or right.
Each color is paired with its complementary color, so as you drag a
triangle you are increasing a color while decreasing its
complementary color.
3. Click Preview to see the effect of the changes on the preview
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
4. Click Reset to reset the levels to their original values.
5. Click OK when the levels are what you want.
HUE/SATURATION/LIGHTNESS
Hue is the color your eyes see as reflected from the image, saturation is
the strength or purity of a color and determines whether a color is pale
or rich, and lightness is the intensity of the color.
To adjust the hue/saturation/lightness:
1. Click the Hue/Saturation/Lightness button.
The settings in the dialog box are initially set to zero, indicating no
change to the original image’s hue, saturation, or lightness.
2. Type a number in one or more of the color boxes to set a new level,
or drag the triangles to the left or right.
3. Click Preview to see the effect of the changes on the preview
image.
4. Click Reset to reset the levels to their original values.
5. Click OK when the levels are what you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS 98, ME, 2000, OR XP
43
COLOR DROP-OUT
Color drop-out is the ability of your scanner to automatically remove
one color from a scanned item. For example, if you are scanning a letter
with a red watermark, you can choose to drop-out the color red (the R
Channel) so the scanned letter just shows the text and not the red
watermark.
Color drop-out applies when you select the scanning image types of
Black and White, Halftone, 8-Bit Gray or 16-Bit Grayscale. It does not
apply to the image types of 24-Bit Color or 48-Bit Color.
Here are some examples of color drop-out:
The original with black
text on a blue background
The scanned item with the
B Channel (Blue) dropped out
The original with a red
watermark over black text
The scanned item with the
R Channel (Red) dropped out
Download from Www.Somanuals.com. All Manuals Search And Download.
44
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
To drop the color out of a black and white, or grayscale image:
1. From the Image Type list, choose Black and White, Halftone,
8-Bit Gray, or 16-Bit Grayscale.
2. Click the Color Drop-out icon.
3. On the Color Drop-out dialog box, choose a color to drop out.
4. Click OK.
Now when you scan the black and white or gray item, the selected
color is removed.
ADJUSTING THE SCANNER’S POWER SAVING TIME
Your scanner has a built-in power saving feature that is set to power
down after 45 minutes of idle time. You can change the time before the
scanner powers down, from 15 to a maximum of 180 minutes.
To adjust the power down time:
1. Right-click the Visioneer icon on the top-left corner of the Scan
Manager desktop and select Set Power Saving from the menu.
2. On the Set Power Saving Time dialog box, enter a value from 15 to
180 minutes.
3. Click OK to save the change and close the dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS ME OR XP
45
If your computer is running the Windows Me or XP operating system,
you have a choice of scanning using the TWAIN-compliant Visioneer
Scan Manager software as just described (see “Scanning from Windows
98, Me, 2000, or XP” on page 24) or scanning using the Microsoft
Windows Image Application (WIA) standard as described below.
Note: The screen captures in this section show the WIA-standard
screens as they appear in the Windows XP operating system. If you
are using Windows Me, the screens will look slightly different, but
will function in the same manner.
To scan an item:
1. On the Windows taskbar, click Start, point to All Programs, point
to ScanSoft PaperPort 9.0, and then click PaperPort.
The PaperPort desktop opens.
2. Click the Scan icon on the PaperPort command bar.
The Folders pane is replaced by the Scan pane.
Scan pane
3. From the Scanner drop-down list, select WIA-Strobe XP 450.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
4. In the “Scan what?” section, choose to scan a Document or
Photograph.
5. Click Settings to view and change the format for the scanned item’s
file name and the file type. The default file type for documents is
.pdf and for photographs is .jpg.
6. Use the Single page itemscheck box as follows:
I When the check box is selected, all pages in the document feeder
are scanned and placed in a stack on the PaperPort desktop.
I When the check box is not selected, all pages in the document
feeder are scanned, but not placed on the PaperPort desktop
until you indicate the scanning job is finished.
7. Click the Scan button in the Scan pane.
The Scan using Strobe XP 450 window opens. Use this window to
select scanning options and start the scanner.
8. Make sure the Paper source value is set to Document Feeder.
9. Click the button most appropriate for the item you’re scanning.
10. Select a paper size from the Page Size drop-down list.
11. Click Preview to preview the image before scanning.
The image is displayed on the right side of the window.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS ME OR XP
47
Note: If you preview when scanning a stack of documents, the first
page of the stack feeds through the ADF for the preview. After
adjusting the scanner settings, replace that page on the stack so it is
scanned with the rest of the pages.
12. Adjust settings of the previewed image as desired:
I Change the button selection for the type of image.
I Adjust the custom settings; refer to the next section, “Fine
Tuning Your Scans”.
I Change the size of the scanned image. To do this, click and hold
the mouse pointer over one of the four sizing-boxes on the
corners of the previewed image. Then drag the box to increase or
decrease the size of the image.
13. Preview the image again. When you are satisfied with the image,
click the Scan button.
If the Single page items check box is selected on the Scan pane, the
scanned item appears as a thumbnail on the PaperPort desktop.
not appear until you indicate the scanning job is finished.
I On the PaperPort - Scan message box, click Done.
Note: Refer to “The Single Page Items Check Box” on page 27.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
FINE TUNING YOUR SCANS
You can select new settings before you scan an item to fine tune exactly
how you want to scan a particular item.
To select the scanner settings before you scan:
1. On the Scan using Strobe XP 450 window, click Adjust the
quality of the scanned picture.
The Advanced Properties dialog box opens.
2. Select the options for scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM WINDOWS ME OR XP
49
Brightness and Contrast—Drag the sliders to the right or left to
adjust the brightness and contrast of the scanned image. The
Contrast setting does not apply to the setting Black and White
picture or text.
Resolution (DPI)—Click the drop-down list and choose the dots
per inch (dpi) of the resolution. The maximum resolution is 600
dpi; the minimum is 50 dpi. The higher the dpi setting, the sharper
and clearer the scanned image. However, higher dpi settings take
longer to scan and produce larger files for the scanned images.
Picture type—Click the drop-down menu and choose the most
appropriate type for the item you’re scanning.
3. Click OK.
The Custom Settings button is now set to scan with the options
you selected.
If you want to reset the settings and start over, click Reset.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
Maintenance
This chapter contains information on maintenance, troubleshooting,
uninstalling, scanner specifications, and spare parts.
CLEANING THE AUTOMATIC DOCUMENT FEEDER
You may need to clean the ADF feed mechanism if your documents do
not feed easily into the ADF, or several feed in at the same time.
To clean the ADF:
1. Wet a cotton swab with some isopropyl alcohol (95%).
2. Press the ADF cover release on the top left of the scanner body to
open the automatic document feeder cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean its
entire surface.
4. Wipe the pad from top to bottom. Be careful not to snag the swab
on the springs on either side of the pad.
5. Close the cover when you’re finished.
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEARING PAPER JAMS
51
CLEARING PAPER JAMS
If your scanner stops scanning due to a paper jam in the Automatic
Document Feeder, a warning dialog box opens after a few moments.
To clear a paper jam:
1. Press the ADF cover release on the top-left of the scanner body to
open the automatic document feeder cover.
2. Remove the jammed paper and close the cover.
To reduce the number of paper jams, smooth and straighten paper
before scanning and adjust the guides to the paper size.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
The ADF pad spring may begin to wear out after 150,000 scanned
pages. Problems with documents feeding into the ADF is an indication
that the pad spring may be wearing out.
See the “Visioneer Strobe XP 450 Scanner Parts List” on page 58 for
ordering information.
To replace the ADF Pad assembly:
1. Press the ADF cover release on the top left of the scanner body to
open the automatic document feeder cover.
2. Squeeze the plastic clamps that hold the pad assembly in place and
lift the pad up and out
3. Reverse the procedure to replace the new pad into its slots.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
53
TROUBLESHOOTING
In addition to the troubleshooting information contained in this
section, please see the Readme file on your installation CD. The
Readme file contains additional information that may help you
diagnose problems with the scanner.
If you try the troubleshooting procedures described in this section and
in the Readme file, and the scanner still has problems, you may have a
malfunctioning scanner. Refer to the technical support card that you
for additional technical information.
Problem: The scanner won’t scan. What’s wrong?
Check for one of these possible problems:
• Are the cables loose or not plugged in securely? Inspect the cable
connections. Make sure the cables are plugged in securely.
• Is the scanner’s status light on? Turn on the scanner’s power. If the
status light doesn’t come on, plug the power supply into another
electrical outlet.
• Did you restart the computer after installing the software? If you
didn’t restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
• Did you plug the scanner into a USB hub? If you’re using a USB
hub to connect the scanner, the hub must have its own power supply.
If the hub does not have its own power supply, plug the scanner into
a USB port on the computer.
• Did you select another scanning source in the PaperPort Scan
Pane? If you use multiple devices with your computer, you may have
selected another source for images. Start the PaperPort software and
click the Scan icon, and then make sure Strobe XP 450 is selected as
the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
Problem: During installation I got the error message: PaperPort
Installation is not complete. What do I do?
The installation procedure was not successful. You need to reinstall the
PaperPort software.
Problem: I got the error message: PaperPort cannot allocate enough
memory to perform internal critical operations. What do I do?
Close any other active applications so that additional memory is
available. If you click Continue, PaperPort moves the file to the
PaperPort data directory and renames the file with the prefix “bad”.
This allows you to recover the file later.
To recover the file, you can import it into PaperPort by using the
Import command in the File menu.
Problem: How do I uninstall PaperPort?
See the next section. Uninstalling does not delete your scanned items,
and they remain in the PaperPort Data folder.
Problem: What do the different status light conditions mean?
The status light indicates the current state of the scanner. Descriptions
of the most common patterns are listed below. Contact Visioneer
Technical Support if you experience a different blinking pattern.
• Blinking green: indicates the scanner is preparing to scan.
• Steady green: indicates the scanner is ready to scan.
• Blinking red, 1 long + 13 short blinks: indicates the scanner cover
is open.
Download from Www.Somanuals.com. All Manuals Search And Download.
UNINSTALLING YOUR SCANNER
55
UNINSTALLING YOUR SCANNER
To uninstall the Visioneer Strobe XP 450 scanner, remove the scanner
software first, and then remove PaperPort, or other scanner software.
STEP 1: UNINSTALLING THE VISIONEER ONETOUCH SOFTWARE
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. Double-click the Add/Remove Programs icon.
I Windows 98, 98SE, or ME: The Add/Remove Programs
Properties window opens. Select the Install/Uninstall tab.
I Windows 2000 or XP: The Add or Remove Programs window
opens. Make sure the Change or Remove option is selected.
3. From the list of programs, select Visioneer Strobe XP 450.
I Windows 98, 98SE, and ME: Click the Add/Remove button.
I Windows 2000 or XP: Click the Change/Remove button.
4. On the Select Uninstall Method window, make sure the Automatic
option is selected, and then click Next.
Important: The Automatic option is selected by default and is
recommended by Visioneer. The other options are for advanced users.
5. On the Perform Uninstall window, click Finish.
The Visioneer OneTouch software is removed from your computer.
6. If the Remove Shared Components window opens, Visioneer
recommends selecting No to All.
7. Unplug the USB cable from your computer and scanner.
8. Close all open windows and restart your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
STEP 2: UNINSTALLING THE PAPERPORT SOFTWARE
To uninstall PaperPort 9.0 from Windows 98SE or ME:
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. Double-click the Add/Remove Programs icon.
3. On the Add/Remove Programs Properties window, select the
Install/Uninstall tab.
4. Select PaperPort 9.0 and click Remove.
5. On the Welcome window, click Next.
6. On the Program Maintenance window, select the Remove option,
and then click Next.
7. On the Remove the Program window, select the Remove files
option, and then click Remove.
The PaperPort software is removed.
8. On the Uninstall Completed window, click Finish.
9. Close all open windows and restart your computer.
To uninstall PaperPort 9.0 from Windows 2000 or XP:
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. Click the Add or Remove Programs icon.
The Add or Remove Programs window opens.
3. Select PaperPort 9.0 and click Remove.
4. A message window opens, asking if you are sure you want to
remove PaperPort 9.0 from your computer. Click Yes.
The PaperPort software is removed.
5. Close all open windows and restart your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
VISIONEER STROBE XP 450 SCANNER SPECIFICATIONS
57
VISIONEER STROBE XP 450 SCANNER SPECIFICATIONS
Optical resolution
Bit depth
600 x 1200 dpi
48-bit color
Maximum item size
Minimum item sizes
8.5” x 14”
3.5” x 2” (automatic document feeder)
2.5” x 2” (front feed)
Scan method
ADF specifications
Scanning Speed
Capacity
Automatic document feeder (ADF)
Up to 22 pages per minute @ 200 dpi B&W
50 sheets
Paper Thickness
Light source
16 - 28 lbs. (0.002” - 0.006”)
Cold cathode fluorescent lamp
USB 2.0
Interface
Scanner dimensions
Height
12.5 inches (31.75 cm)
Width
13.25 inches (33.66 cm)
Length
17 inches (43.18 cm)
Weight
8.6 pounds (3.91 kg)
Operating temperature
Relative humidity
Power supply
Input voltage/frequency
Output voltage/watt
Power consumption
50°–104° F (5°–35° C without condensation)
40%–70% (@35° C without condensation)
100 - 240 Vac, 47 - 63 Hz
24 V DC, 20.16 watt maximum
< = 30 Watts
Safety and agency certifications UL, ULc, FCC Class B,
VCCI Class B, CE
Hardware warranty
One-year limited warranty upon registration of the
scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
58
VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
VISIONEER STROBE XP 450 SCANNER PARTS LIST
Please use the following part names and numbers when ordering
replacements for your scanner.
Part Name
Part Number
Paper Guide
57-0101-000
Output Tray
57-0102-000
ADF Pad
57-0100-000
35-0071-000
AC Power Cord
Power Supply
37-0064-000
Download from Www.Somanuals.com. All Manuals Search And Download.
destination application
I N D E X
Numerics
24-bit color 29, 43
8-bit gray 29, 43
A
adjust image 28
AutoCrop
G
gamma 39
AutoScan 11
configuring 13
halftone 29
help 4
highlight level 39, 40
B
bit depth 57
black and white 29
brightness 30
brightness slider 30
C
CD
other software 10
CD-ROM drive 3
color adjustment 36
automatic 38
manual setting 38
color balance 41
color drop-out 43
components 2
editing 19
new configuration 16
new settings 15
contrast 14, 30
contrast slider 30
cropping 18
L
length and width
lightness 42
lock scaling icon 34
M
D
magazine article 36
monitor 3
DeScreen 18
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
60
manual setting 33
Scan Manager
N
newspaper article 36
O
on/off switch 7
output size 31, 33
P
paper guide 5
scanning
paper size 32
PaperPort 22
desktop 24
Scan pane 24
PaperPort desktop
thumbnail 27
specifications
patterns on picture 36
preferences
computer 3
tab 20
T
R
thumbnail 27
Twain standard 22
resolution 30
reverse image 35
RGB 39, 40
ruler units 32
U
S
saturation 39, 42
scan
file name 27
multiple pages 27
PaperPort desktop 27
preview 26
watermark, remove 43
wavy appearance 36
WIA standard 22
Windows Me or XP
scanning in PaperPort 45
small item 31
scan area
automatic setting 31
Download from Www.Somanuals.com. All Manuals Search And Download.
|