VENTILATION
Built-In Classic Chimney Wall Hood—
Standard, w/Ledge, & Ledgeless
Standard Features & Accessories
All models include
• Adjustable duct cover (for 8 – 9’
o Virtually seamless stainless steel
design with no visible screws
• Easy cleanup
Model numbers
ceilings) is standard
CLASSIC CHIMNEY WALL HOODS
• DCWH3042—30”W./12”H.
• DCWH3644—36”W./14”H.
• DCWH4244—42”W./14”H.
• DCWH4844—48”W./14”H.
CLASSIC CHIMNEY WALL HOODS WITH
LEDGE
• Must also purchase interior or exterior
ventilator kit, sold separately (see
Installation Notes & Accessories for
recommended Viking ventilator
products)
• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels
• Variable speed controls for custom
venting—separate on/off switch allows
you to leave ventilator at favorite/most-
used setting
• 12-hour timer built into ventilator
controls
o Dishwasher-safe, stainless steel mesh
filters efficiently remove grease and
heated vapors from the air, and are
easily removed for quick cleaning
(frame and mesh are stainless steel)
• See Dimensions & Specifications
table for number of filters per model
o Design of low-profile filter system
means less interior hood space to be
cleaned
o Canopy interior is completely lined in
stainless steel for increased rigidity,
seamless appearance, and easy cleaning
• 50-watt halogen lights with dimmer
control
• DCWL3342—33”W./12”H.
• DCWL3944—39”W./14”H.
• DCWL4544—45”W./14”H.
• DCWL5144—51”W./14”H.
CLASSIC CHIMNEY WALL HOODS,
LEDGELESS
• DCWN3042—30"W./12"H.
• DCWN3644—36"W./14"H.
• DCWN4244—42"W./14"H.
DCWN4844—48"W./14"H.
• Delay feature allows you to set the
ventilator to shut off on its own from
10 to 30 minutes later
• 24”D. (tests show 24”D. hoods perform
properly over 27”D. ranges)
• Power switch and dimmer control are
separate, allowing you to leave dimmer
at favorite position
• Heavy-duty construction; sleek,
contemporary design and styling
o See Dimensions & Specifications
table for number of lights per model
Model Options
DCWH Designer
Chimney Wall Hood
DCWL Designer
Chimney Wall Hood
w/Ledge
DCWN Designer
Chimney Ledgeless
Wall Hood
FINISH DETAILS
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite Gray
(GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray
(OG), Golden Mist (GM), Lemonade (LE),
Sage (SA), Mint Julep (MJ), Sea Glass (SE),
Iridescent Blue (IB), Viking Blue (VB),
Pumpkin (PM), Racing Red (RR), Apple
Red (AR), Burgundy (BU), Plum (PL),
Chocolate (CH), and Cobalt Blue (CB).
• Accessory Rail Option*—Front of hood.
(Must be ordered factory installed. Rail not
available on ledge & ledgeless models.)
o Stainless Steel/Chrome (CR)—Stainless
steel rail with chrome supports/brackets
and hooks (included).
o Brass Rail Option (BR)—nameplate, rail,
supports/brackets, and hooks
(included). Brass components have a
durable protective coating for
maintenance-free normal use.
ORDERING INSTRUCTIONS
First specify model number, followed by color code (DCWH3042SS). If ordering optional decorative rail, specify code at end
(DCWH3042SSCR).
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
VENTILATION
Built-In Classic Chimney Wall Hood—
w/Ledge, & Ledgeless
Please see
Dimensions & Specifications
✪
Installation Notes &
Accessories for
important information,
including ventilator
kits, duct covers,
backsplashes, and
warming shelf
PRODUCT DIMENSIONS
panels.
DCWL Designer
Chimney Wall Hood
w/Ledge
DCWN Designer
Chimney Ledgeless
Wall Hood
12”
12”
C
C
(30.5 cm)
(30.5 cm)
D
B
D
B
2 ”
(5.1 cm)
A
A
24”
cm)
0
.
(61
m)
c
CHIMNEY WALL
HOOD LEDGE
CHIMNEY WALL
HOOD LEDGELESS
25-1/2”
.8
(64
Model
Hood
Width (A)
Duct Cover
Depth
Lights
Filters
Heat
Lamps
Approx.
Ship. wt.
Height (B)
Width (C)
Height (D)
DCWL3342 32-7/8” (83.5 cm)
DCWL3944 38-7/8” (98.4 cm)
DCWL4544 44-7/8” (114.0 cm)
DCWL5144 50-7/8” (129.2 cm)
DCWN3042 29-7/8” (75.9 cm)
DCWN3644 35-7/8” (91.1 cm)
DCWN4244 41-7/8” (106.4 cm)
DCWN4844 47-7/8” (121.6 cm)
12” (30.5 cm) 10” (25.4 cm) 12” (30.5 cm) 18” (45.7 cm)—
30” (76.2 cm)
2
2
2
3
2
2
2
3
2
2
3
3
2
2
3
3
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
54 lbs.
(24.5 kg)
64 lbs.
14” (35.5 cm)
12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)—
28” (71.1 cm)
(29.0 kg)
74 lbs.
14” (35.5 cm) 12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)—
28” (71.1 cm)
(33.6 kg)
85 lbs.
14” (35.5 cm) 18” (45.7 cm) 12” (30.5 cm) 16” (40.6 cm)—
28” (71.1 cm)
(38.6 kg)
51 lbs.
12” (30.5 cm) 10” (25.4 cm) 12” (30.5 cm) 18” (45.7 cm)—
30” (76.2 cm)
(23.1 kg)
61 lbs.
14” (35.5 cm)
14” (35.5 cm)
14” (35.5 cm)
12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)—
28” (71.1 cm)
(27.7 kg)
71 lbs.
12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)—
28” (71.1 cm)
(32.2 kg)
82 lbs.
18” (45.7 cm) 12” (30.5 cm) 16” (40.6 cm)—
28” (71.1 cm)
(37.2 kg)
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
VENTILATION
Built-In Classic Chimney Wall Hood—
Standard, w/Ledge, & Ledgeless
Dimensions & Specifications
CLEARANCE DIMENSIONS
66”min.
(167.6 cm)
30”min.
to
72”max.
(76.2 cm)
(182.9 cm)
to
36”max.
(91.4 cm)
36”
(91.4 cm)
CHIMNEY WALL HOOD
66”min.
(167.6 cm)
30”min.
to
72”max.
(76.2 cm)
(182.9 cm)
to
36”max.
(91.4 cm)
36”
cm)
(91.4
CHIMNEY WALL HOOD
LEDGE/LEDGELESS
Note: For best performance and safe, efficient operation,
it is recommended that the bottom of the hood be 30”
(76.2 cm) to 33” (83.8 cm) above the countertop.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
VENTILATION
Built-In Classic Chimney Wall Hood—
Standard, w/Ledge, & Ledgeless
Installation Requirements
DCWH Designer
Chimney Wall Hood
DCWL Designer
Chimney Wall Hood
w/Ledge
DCWN Designer
Chimney Ledgeless
Wall Hood
UTILITY REQUIREMENTS
Proper installation/ducting is extremely
important to ensure maximum
performance. Use a qualified and
trained installer.
o Straight runs and gradual
turns are best; for example,
each 90” elbow is equivalent
to 5’ – 10’ (1.52 – 3.05 cm) of
straight run.
• 7’ round duct for 300 – 600
CFM; 10’ for 900 – 1500 CFM
o Never use flexible duct; it
creates back pressure/air
turbulence and greatly
ELECTRICAL
• Hardwire direct with two-wire
with ground
• 120 VAC/60 Hz
• Max. amp usage (rating
includes rec. ventilator kit
rating)
VENTILATION
• Check with a qualified and
trained installer or local codes
for makeup air requirements, if
any.
PLUMBING
Not applicable
• Max. duct run
reduces performance.
o For 300 – 1,200 CFM—50’
(15.2 m)
GAS
o For 1,500 CFM—75’ (22.9 m)
o Duct run length is for general
reference only; always use a
qualified and trained installer.
Not applicable
Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly
overstated.
Model
Ventilator kits
Duct size
Max. amps
Interior
Interior
Exterior
Interior
Exterior
Exterior
6.6/3.9
6.6/3.9
6.6/3.
DCWH3042
DCWH3644
DCWH4244
DCWH4844
DCWL3342
DCWL3944
DCWL4544
DCWL5144
DCWN3042
DCWN3644
DCWN4244
DCWN4844
DIV300/DIV440
DIV300/DIV600*
DIV600
DEV900/DEV1200
DEV900/DEV1200*
DEV900/DEV1200*
DEV1200/DEV1500**
DEV900/DEV1200
DEV900/DEV1200*
DEV900/DEV1200*
DEV1200/DEV1500**
DEV900/DEV1200
DEV900/DEV1200*
DEV900/DEV1200*
DEV1200/DEV1500**
7” (17.8 cm)
7” (17.8 cm)
7” (17.8 cm)
10” (25.4 cm)
7” (17.8 cm)
7” (17.8 cm)
7” (17.8 cm)
10” (25.4 cm)
7” (17.8 cm)
7” (17.8 cm)
7” (17.8 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
1.7/3.2
1.7/3.9
3.9
DIV1200*
7.3
4.3/5.1
6.6/3.9
6.6/3.9
6.6/3.9
4.3/5.1
6.6/3.9
6.6/3.9
6.6/3.9
4.3/5.1
DIV300/DIV440
DIV300/DIV600*
DIV600
1.7/3.2
1.7/3.9
3.9
DIV1200
7.3
DIV300/DIV440
DIV300/DIV600*
DIV600
1.7/3.2
1.7/3.9
3.9
DIV1200*
7.3
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs.
Note: Maximum amp rating for hoods includes recommended ventilator kit rating. All products must be hard wired with two-wire ground. An interior- or
exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
VENTILATION
Built-In Classic Chimney Wall Hood—
Standard, w/Ledge, & Ledgeless
Installation Notes & Accessories
✪
Recommended Ventilator Kits
• See Installation Requirements table for recommendations for each hood model
• One ventilator, one duct run for any size hood/ventilator
• A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilator should be used over ranges/rangetops with gas grill
• Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty
Kit model
Description
Hood models
Approx. ship wt. lbs. (kg)
DIV300
300 CFM interior-power
DCWH3042/3644, DCWL3342/3944, &
15 (6.8)
DCWN3042/3644
DIV440
DIV600
440 CFM interior-power
600 CFM interior-power
DCWH3042, DCWL3342, & DCWN3042
DCWH3644/4244, DCWL3944/4544, &
DCWN3644/4244
25 (11.3)
27 (12.2)
DIV1200
DEV900
1,200 CFM interior-power
900 CFM exterior-power
DCWH4844, DCWN5144, & DCWN4844
DCWH3042/3642/4244, DCWL3342/3944/4544, &
DCWN3042/3644/4244
43 (19.4)
39 (17.6)
DEV1200
DEV1500
1,200 CFM exterior-power
1,500 CFM exterior-power
DCWH3042/3644/4244/4844, DCWL3342/3944/
4544/5144, & DCWN3042/3644/4244/4844
DCWH4844, DCWL5144, & DCWN4844
53 (23.9)
47 (21.3)
Duct Cover Extensions
• For use with DCWH, DCWL, & DCWN hoods
• Extends height of hood by up to 12” (for 10’ ceilings)
• Replaces adjustable duct cover supplied with hood
• Specify finish code following accessory model number (for example, DCCE1010-SS)
• Available in Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Stone Gray (SG), and Graphite Gray (GG)
Model
Description
Approx. ship wt. lbs. (kg)
DCCE1010
DCCE1210
DCCE1810
Duct cover extension (for 30” & 33”W. hoods—10”W. x 12”D. x 30” – 42”H.)
Duct cover extension (for 30”, 39”, 42”, & 45”W. hoods—12”W. x 12”D. x 28” – 40”H.)
Duct cover extension (for 48” & 51”W. hoods—18”W. x 12”D. x 28” – 40”H.)
4 (1.8)
6 (2.7)
8 (3.6)
Backsplashes
• Stainless Steel (SS)
• 30”H.
• Backsplashes protect the wall space below hood
• Create a continuous finish between cooking surface and hood
• Low maintenance, easy to clean
• Hemmed edges with screw holes
• Kit includes backsplash and fastening screws
Model
BKS30
BKS36
BKS42
BKS48
BKS54
Description
Approx. ship wt. lbs. (kg)
7 (3.2)
30”W. backsplash
36”W. backsplash
42”W. backsplash
48”W. backsplash
54”W. backsplash
9 (4.1
12 (5.4)
14 (6.3)
17 (7.7)
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
VENTILATION
Built-In Classic Chimney Wall Hood—
Standard, w/Ledge, & Ledgeless
Installation Notes & Accessories
✪
Warming Shelf Panels
• Stainless Steel (SS)
• 12”D./12”H.
• Shelf panels hold cookware and condiments
• Fold up/down, heavy-duty warming shelves (non-removable), factory installed on stainless steel backsplash
• 15-7/8”W. X 10-1/8”D.
• Kit includes shelf (or shelves) and fastening screws
Model
WGP30
WGP36
WGP42
WGP48
WGP54
Description
Approx. ship wt. lbs. (kg)
9 (4.1)
30”W. warming shelf panels (one shelf)
36”W. warming shelf panels (two shelves)
42”W. warming shelf panels (two shelves)
48”W. warming shelf panels (two shelves)
54”W. warming shelf panels (two shelves)
12 (5.4)
14 (6.3)
16 (7.2)
20 (9.0)
Compliance Information
WARRANTY SUMMARY*
• One-year full warranty—complete product
• Five-year limited warranty—all ventilator motors
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items
*Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty. For complete warranty see Use & Care Guide.
Warranty valid on Viking products shipped within the United States and Canada.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|