ViewSonic Projector VS13648 User Manual

®
ViewSonic  
- User Guide  
- Guide de l’utilisateur  
- Bedienungsanleitung  
- Guía del usuario  
- Guida dell’utente  
- Guia do usuário  
- Användarhandbok  
- Käyttöopas  
Pro8200  
DLP Projector  
- Руководство пользователя  
- 使用手冊 (繁體)  
- 使用手册 (简体)  
- 사용자 안내서  
IMPORTANT: Please read this User Guide to obtain important  
information on installing and using your product in a safe  
manner, as well as registering your product for future service.  
Warranty information contained in this User Guide will describe  
your limited coverage from ViewSonic Corporation, which is  
English, or in specific languages using the Regional selection  
box in the upper right corner of our website.  
- อการใชงาน  
- Podręcznik użytkownika  
- Kullanιcι kιlavuzu  
“Antes de operar su equipo lea cuidadosamente las  
instrucciones en este manual”  
Model No. : VS13648  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this unit near water.  
Clean with a soft, dry cloth.  
Do not block any ventilation openings. Install the unit in accordance with the  
manufacturer’s instructions.  
8.  
9.  
Do not install near any heat sources such as radiators, heat registers, stoves, or other  
devices (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the other. A grounding type plug has two  
blades and a third grounding prong. The wide blade and the third prong are provided  
for your safety. If the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs.  
Convenience receptacles and the point where they exit from the unit. Be sure that the  
power outlet is located near the unit so that it is easily accessible.  
11. Only use attachments/accessories specified by the manufacturer.  
12.  
Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the unit. When a cart is used, use caution when  
moving the cart/unit combination to avoid injury from tipping over.  
13. Unplug this unit when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the unit  
has been damaged in any way, such as: if the power-supply cord or plug is damaged,  
if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or  
moisture, or if the unit does not operate normally or has been dropped.  
ViewSonic Pro8200  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of RoHS Compliance  
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the  
European Parliament and the Council on restriction of the use of certain hazardous substances in  
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum  
concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:  
Proposed Maximum  
Substance  
Actual Concentration  
Concentration  
Lead (Pb)  
0.1%  
0.1%  
0.01%  
0.1%  
0.1%  
0.1%  
< 0.1%  
< 0.1%  
< 0.01%  
< 0.1%  
< 0.1%  
< 0.1%  
Mercury (Hg)  
Cadmium (Cd)  
6+  
Hexavalent Chromium (Cr  
)
Polybrominated biphenyls (PBB)  
Polybrominated diphenyl ethers (PBDE)  
Certain components of products as stated above are exempted under the Annex of the RoHS Directives  
as noted below:  
Examples of exempted components are:  
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not  
specifically mentioned in the Annex of RoHS Directive.  
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic  
parts (e.g. piezoelectronic devices).  
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).  
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up  
to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.  
ViewSonic Pro8200  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright Information  
Copyright© ViewSonic® Corporation, 2010. All rights reserved.  
Macintosh and Power Macintosh are registered trademarks of Apple Inc.  
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft  
Corporation in the United States and other countries.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of  
ViewSonic Corporation.  
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are  
trademarks of VESA.  
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.  
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions  
contained herein; nor for incidental or consequential damages resulting from furnishing this material, or  
the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change  
product specifications without notice. Information in this document may change without notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose  
without prior written permission from ViewSonic Corporation.  
Product Registration  
To meet your future needs, and to receive any additional product information as it becomes available, please  
provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.  
For Your Records  
Product Name:  
Pro8200  
ViewSonic DLP Projector  
VS13648  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
Pro8200_UG_ENG Rev. 1A 08-25-10  
_______________________________  
_______________________________  
Product disposal at end of product life  
The lamp in this product contains mercury which can be dangerous to you and the environment.  
Please use care and dispose of in accordance with local, state or federal laws.  
ViewSonic respects the environment and is committed to working and living green.  
Thank you for being part of Smarter, Greener Computing.  
Please visit ViewSonic website to learn more.  
3. Taiwan: recycle.epa.gov.tw/recycle/index2.aspx  
ViewSonic Pro8200  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
LED Indicator Messages ..........................................................................................38  
RS-232 Command and Configuration ......................................................................42  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Projector Features  
The projector integrates high-performance optical engine projection and a user - friendly  
design to deliver high reliability and ease of use.  
The projector offers the following features:  
Single chip 0.65" Texas Instruments DLP® technology  
1080p (1920 x 1080 pixels)  
Compatibility with Macintosh® computers  
Compatibility with NTSC, PAL, SECAM and HDTV  
D-Sub 15-pin terminal for analog video connectivity  
User-friendly, multi-language on-screen display  
Advanced electronic keystone correction  
RS-232 connector for serial control  
HDMI compatibility  
Less than 1 W power consumption in standby mode  
The information in this manual is subject to change without notices.  
The reproduction, transfer or copy of all or any part of this document is not  
permitted without express written consent.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
   
Package Contents  
When you unpack the projector, make sure you have all these components:  
HDMI1  
Video  
HDMI2  
Compo  
PC  
Swap  
Default  
Projector with Lens Cap  
AC Power Cord  
Remote Control (IR) & batteries  
VGA Cable (D-SUB to D-  
HDMI Cable  
ViewSonic CD  
Wizard  
Quick Start  
Guide  
SUB)  
Optional accessories  
Filter cover  
P/N: P4R34-4600-00  
RS232 cable  
P/N: J2552-0208-00  
RGB to component adapter  
P/N: J2552-0212-00  
ViewSonic Pro8200  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Projector Carrying Case  
Contact you dealer immediately if any items are missing, appear damaged, or if  
the unit does not work  
Save the original shipping carton and Packing material; they will come-in  
handy if you ever to ship your unit. for maximum protection, repack your unit as  
it was originally packed at the factory.  
.
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Projector Overview  
Front View  
12  
11 10  
9
13  
1
2
4
5
6
7
8
3
Lens cap  
Filter cover  
Speaker  
8
1
2
3
4
5
6
7
Elevator button  
Elevator foot  
9
Focus ring  
Zoom ring  
Control panel  
Lamp cover  
10  
11  
12  
13  
Lens cap strap  
Projection lens  
Front IR remote control sensor  
Ventilation holes (intake)  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
 
Rear View  
2
3
4
6
1
5
Connection ports  
1
2
3  
4
5
6  
AC power socket  
Kensington lock  
Rear IR remote control sensor  
Speaker  
Ventilation holes (exhaust)  
Bottom View  
103  
3
174  
1
227  
2
Ceiling mount holes (M4*8)  
Tilt-adjustment feet  
Security bar  
1
2
3
This projector can be used with a ceiling mount for support. The ceiling mount is  
not included in the package.  
Contact your dealer for information to mount the projector on a ceiling.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Using the Product  
Control Panel  
9
1
2
3
4
8
5
6
10  
7
4
Power (Power LED indicator)  
Refer to “LED Indicator Messages”.  
TEMP (Temperature LED indicator)  
Refer to “LED Indicator Messages”.  
LAMP (Lamp LED indicator)  
Refer to “LED Indicator Messages”.  
Keystone/Arrow keys ( /Up,  
Manually correct distorted images resulting from an angled projection.  
1
2
3
4
5
/Down)  
Four directional buttons  
Use four directional buttons to select items or make adjustments to your selection.  
ENTER  
6
Enter to sub-menu and confirm the menu selection.  
SOURCE  
7
8
Display the source selection bar.  
MENU/EXIT  
Display or exit the on-screen display menus.  
Power  
9
Turn the projector on or off.  
Right/Panel key  
10  
Activate panel key lock.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
   
Connection Ports  
7
2
3
5
6
1
4
16  
15  
14  
12 11 10  
8
13  
9
RS-232  
1
When operating the projector via a computer, connect this to the controlling  
computer's RS-232C port.  
Monitor Out  
2
3
4
5
6
7
Connect to a computer display, etc.  
Component (Y Cb/Pb Cr/Pr)  
Connect Y Cb/Pb Cr/Pr output from video equipment to this jack.  
S-Video  
Connect S-Video output from video equipment to this jack.  
USB A  
This connector supports firmware update.  
HDMI 1  
Connect HDMI output from video equipment to this jack.  
HDMI 2  
Connect HDMI output from video equipment to this jack.  
DC 12V Out  
8
9
12V DC out  
MIC in  
Microphone input jack.  
Audio Out  
10  
11  
12  
Connect to a speaker or other audio input equipment.  
Audio 2  
Connect an audio output from video equipment or computer to this jack.  
Audio 1  
Connect an audio output from video equipment or computer to this jack.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
Audio 3 (L/R)  
13  
14  
15  
16  
Connect an audio output from video equipment to this jack.  
Video  
Connect composite video output from video equipment to this jack.  
Computer in 2  
Connect image input signal (analog RGB or component) to this jack.  
Computer in 1  
Connect image input signal (analog RGB or component) to this jack.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Remote Control  
Power  
1
Turn the projector on or off.  
HDMI 1  
13  
14  
15  
16  
17  
2
Display HDMI 1 signal.  
HDMI1  
Video  
HDMI2  
Compo  
PC  
Video  
3
3
4
Switch input source to Composite/  
S-Video by sequence.  
Up/Volume +,  
Volume -  
When the On-Screen Display  
(OSD) menu is not activated,  
adjust the projector’s sound level.  
Down/  
4
5
5
4
18  
19  
20  
21  
22  
23  
24  
6
7
Left/Mute  
When the On-Screen Display  
(OSD) menu is not activated, this  
button is used as mute function.  
8
Swap  
9
10  
11  
12  
Menu  
6
7
Default  
Display on-screen display menus.  
25  
User 1  
Recall the customized settings  
based on the current available  
settings.  
HDMI 2  
15  
16  
Function  
User definable key for customized  
function.  
Gamma  
Change the gamma setting.  
8
9
Display HDMI 2 signal.  
PC  
Switch input source to Computer in 1/  
Computer in 2 by sequence.  
Enter  
17  
18  
Pattern  
10  
11  
Confirmed selections.  
Display embedded test pattern.  
Right/ Lock  
Color Mode  
Change the image mode setting  
by sequence.  
When the On-Screen Display (OSD)  
menu is activated, the #4, #5, and #18  
keys are used as directional arrows to  
select the desired menu items and to  
make adjustments.  
Blank  
12  
Cut off the screen temporarily.  
Press again to cancel the Blank  
Screen function.  
Activate panel key lock.  
Light  
13  
14  
ESC  
19  
Enable backlight functions of the  
remote control’s buttons.  
Leave current page or items or to close  
OSD.  
Compo  
Display Component video (YPbPr/  
YCbCr) signal.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
 
User 2  
Aspect  
23  
24  
20  
Recall the customized settings  
based on the current available  
settings.  
Select the display aspect ratio.  
RGBCMY  
Change indivial RGBCMY color (user  
color setting).  
PIP/POP  
Switch screen to PIP/POP by  
sequence.  
21  
22  
Default  
25  
Restore settings to factory default.  
Swap  
Swap input source in PIP or POP  
image.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Installing the Batteries  
1.  
2.  
3.  
Open the battery cover in the  
direction shown.  
Install batteries as indicated by the  
diagram inside the compartment.  
Close the battery cover into  
position.  
Caution  
Risk of explosion if battery is replaced by an incorrect type.  
Dispose of used batteries according to the instructions.  
Make sure the plus and minus terminals are correctly aligned when loading a battery.  
Keep the batteries out of the reach of children. There is a danger of death by  
accidentally swallowing the batteries.  
Remove batteries from remote control when not using for extended periods.  
Do not dispose of the used batteries along with household waste. Dispose of used  
batteries according to local regulations.  
Danger of explosion may happen if batteries are incorrectly replaced. Replce all  
the batteries with new ones.  
Batteries should not be in or near to fire or water, keep batteries in a dark, cool  
and dry place.  
If suspect battery leakage, wipe out the leakage and then replace new batteries.  
If the leakage adheres to your body or clothes, rinse well with water immediately.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
 
Remote Control Operation  
Point the remote control at the infrared remote sensor and press a button.  
Operating the projector from  
the front  
Operating the projector from  
the rear  
6m  
8m  
Do not point the laser directly to the people's eyes (especially small children).  
There is a danger of injury to the eyes.  
The remote control may not operate when there is sunlight or other strong  
light such as a fluorescent lamp shining on the remote sensor.  
Operate the remote control from a position where the remote sensor is visible.  
Do not drop the remote control or jolt it.  
Keep the remote control out of locations with excessively high temperature or  
humidity.  
Do not get water on the remote control or place wet objects on it.  
Do not disassemble the remote control.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
 
Connection  
When connecting a signal source to the projector, be sure to:  
1.  
2.  
3.  
Turn all equipment off before making any connections.  
Use the correct signal cables for each source.  
Ensure the cables are firmly inserted.  
10  
1
1
2
8
8
8
7
6
7
5
9
4
3
VGA cable (D-Sub to D-Sub)  
VGA to DVI-A cable  
S-Video cable  
Composite Video cable  
Audio cable  
1
6
7
2
3
4
5
VGA (D-Sub) to HDTV (RCA) cable  
Component Video cable  
Audio L/R cable  
8
9
HDMI cable  
Microphone 3.5 mini jack cable  
10  
Important  
In the connections shown above, some cables may not be included with the  
projector (see “Package Contents” on page 6). They are commercially  
available from electronics stores.  
The connection illustrations above are for reference only. The rear  
connecting jacks available on the projector vary with each projector model.  
For detailed connection methods, see pages 18-21.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
 
Connecting a computer or monitor  
Connecting a computer  
The projector provides two VGA input sockets that allow you to connect them to both  
IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are  
connecting legacy version Macintosh computers.  
To connect the projector to a notebook or desktop computer:  
1.  
Take the supplied VGA cable and connect one end to the D-Sub output socket of  
the computer.  
2.  
Connect the other end of the VGA cable to the Computer in 1 or Computer in 2  
signal input socket on the projector.  
Important  
Many notebooks do not turn on their external video ports when connected to  
a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the  
external display on/off. Locate a function key labeled CRT/LCD or a function  
key with a monitor symbol on the notebook. Press FN and the labeled  
function key simultaneously. Refer to your notebook's documentation to find  
your notebook's key combination.  
Connecting a monitor  
If you want to view your presentation close-up on a monitor as well as on the screen,  
you can connect the Monitor Out signal output socket on the projector to an external  
monitor with a VGA cable following the instructions below:  
To connect the projector to a monitor:  
1.  
Connect the projector to a computer as described in “Connecting a computer” on  
2.  
Take a suitable VGA cable (only one supplied) and connect one end of the cable  
to the D-Sub input socket of the video monitor.  
Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable  
and connect the DVI end of the cable to the DVI input socket of the video monitor.  
Connect the other end of the cable to the Monitor Out socket on the projector.  
Important  
3.  
The Monitor Out output only works when Computer in 1 or Computer in 2  
is made to the projector.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
   
Connecting Video source devices  
You can connect your projector to various Video source devices that provide any one  
of the following output sockets:  
Component Video  
S-Video  
Video (composite)  
You need only connect the projector to a Video source device using just one of the  
above connecting methods, however each provides a different level of video quality.  
The method you choose will most likely depend upon the availability of matching  
terminals on both the projector and the Video source device as described below:  
Best video quality  
The best available video connection method is Component Video (not to be confused  
with composite Video). Digital TV tuner and DVD players output Component Video  
natively, so if available on your devices, this should be your connection method of  
choice in preference to (composite) Video.  
the projector to a component video device.  
Better video quality  
The S-Video method provides a better quality analog video than standard composite  
Video. If you have both composite Video and S-Video output terminals on your Video  
source device, you should elect to use the S-Video option.  
projector to an S-Video device.  
Least video quality  
Composite Video is an analog video and will result in a perfectly acceptable, but less  
than optimal result from your projector, being the least video quality of the available  
methods described here.  
projector to a composite Video device.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
 
Connecting a Component Video source device  
Examine your Video source device to determine if it has a set of unused Component  
Video output sockets available:  
If so, you can continue with this procedure.  
If not, you will need to reassess which method you can use to connect to the  
device.  
To connect the projector to a Component Video source device:  
1.  
Take a VGA (D-Sub) to HDTV (RCA) cable, Component Video cable or a  
Component Video to VGA (D-Sub) adaptor and connect the end with 3 RCA type  
connectors to the Component Video output sockets of the Video source device.  
Match the color of the plugs to the color of the sockets; green to green, blue to  
blue, and red to red.  
2.  
If you are using the VGA (D-Sub) to HDTV (RCA) cable and the Component Video  
to VGA (D-Sub) adaptor, connect the other end of the cable (with a D-Sub type  
connector) to the Computer in 1 or Computer in 2 socket on the projector. If you  
are using the Component Video Cable, connect the other end of 3RCA type  
connectors to the Y Cb/Pb Cr/Pr sockets on the projector.  
Important  
If the selected video image is not displayed after the projector is turned on  
and the correct video source has been selected, check that the Video source  
device is turned on and operating correctly. Also check that the signal cables  
have been connected correctly.  
RGB to component adapter (ViewSonic P/N: J2552-0212-00)  
Connecting an S-Video source device  
Examine your Video source device to determine if it has an unused S-Video output  
socket available:  
If so, you can continue with this procedure.  
If not, you will need to reassess which method you can use to connect to the  
device.  
To connect the projector to an S-Video source device:  
1.  
Take an S-Video cable and connect one end to the S-Video output socket of the  
Video source device.  
2.  
Connect the other end of the S-Video cable to the S-Video socket on the  
projector.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
   
Important  
If the selected video image is not displayed after the projector is turned on  
and the correct video source has been selected, check that the Video source  
device is turned on and operating correctly. Also check that the signal cables  
have been connected correctly.  
If you have already made a Component Video connection between the  
projector and this S-Video source device using Component Video  
connections, you need not connect to this device using an S-Video  
connection as this makes an unnecessary second connection of poorer  
details.  
Connecting a composite Video source device  
Examine your Video source device to determine if it has a set of unused composite  
Video output sockets available:  
If so, you can continue with this procedure.  
If not, you will need to reassess which method you can use to connect to the  
device.  
To connect the projector to a composite Video source device:  
1.  
Take a Video cable and connect one end to the composite Video output socket of  
the Video source device.  
2.  
Connect the other end of the Video cable to the Video socket on the projector.  
Important  
If the selected video image is not displayed after the projector is turned on  
and the correct video source has been selected, check that the Video source  
device is turned on and operating correctly. Also check that the signal cables  
have been connected correctly.  
You need only connect to this device using a composite Video connection if  
Component Video and S-Video inputs are unavailable for use. See  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
Operation  
Powering On/Off the Projector  
Powering On the Projector:  
1.  
2.  
3.  
Remove the projector lens cap.  
Complete the AC power cord and peripheral signal cable(s) connections.  
Press  
to turn on the projector.  
The projector takes a minute or so to warm up.  
Turn on your source (computer, notebook, DVD, etc.). The projector automatically  
detects your source.  
4.  
If you are connecting multiple sources to the projector simultaneously, press  
SOURCE on the projector to select your desired signal or press your desired  
signal key on the remote control.  
Warning  
Remove the lens cap first before powering on.  
Never look into the lens when the lamp is on. This can damage your eyes.  
This focal point concentrates high temperature. Do not place any object near  
it to avoid possible fire hazard.  
Powering Off the Projector:  
1.  
Press  
Press Power again" appear on the screen.  
Press again to confirm.  
to turn off the projector lamp. You will see a message "Power off?  
2.  
The cooling fans continue to operate for cooling cycle.  
When the Power LED begins flashing, the projector has entered stand-by  
mode.  
If you want to turn the projector back on, you must wait until the projector has  
completed the cooling cycle and has entered stand-by mode. Once in stand-  
by mode, simply press  
to restart the projector.  
3.  
4.  
Disconnect the AC power cord from the electrical outlet and the projector.  
Do not turn on the projector right after power off.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
   
Adjusting the Projector Height  
Tilt-adjustment feet  
Elevator foot  
Elevator button  
The projector is equipped with an elevator foot to adjust the image height.  
To raise or lower the image:  
1.  
To raise or lower the image, press the elevator button and raise or lower the front  
of the projector. Release the button to lock the adjustment.  
To level the image on the screen, turn the tilt-adjustment feet to fine-tune the  
height.  
2.  
To avoid damaging the projector, make sure that the elevator foot and tilt-  
adjustment feet are fully retracted before placing the projector in its carrying  
case.  
Adjusting the Projector Zoom and Focus  
Zoom ring  
Focus ring  
1.  
2.  
Focus the image by rotating the focus ring. A still image is recommended for focusing.  
Adjust the image size by sliding the zoom ring.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
   
Adjusting Projection Image Size  
Refer to the graphic and table below to determine the screen size and projection distance.  
Maximum zoom  
Minimum zoom  
Screen  
Center of lens  
Vertical offset  
Projection distance  
16 : 9 Screen  
Projection distance [inch (m)]  
Screen size  
Diagonal  
[inch (cm)]  
Image  
height [inch  
(cm)]  
Vertical  
offset  
[inch (cm)]  
(min. zoom)  
(max. zoom)  
30 (76)  
40 (102)  
50 (127)  
60 (152)  
80 (203)  
100 (254)  
120 (305)  
150 (381)  
200 (508)  
220 (559)  
250 (635)  
300 (762)  
35 (0.89)  
48 (1.21)  
60 (1.52)  
72 (1.83)  
97 (2.46)  
122 (3.09)  
146 (3.72)  
183 (4.66)  
246 (6.24)  
270 (6.87)  
307 (7.81)  
369 (9.38)  
55 (1.39)  
74 (1.87)  
14.7 (37)  
5.0 (12.8)  
19.6 (50)  
6.7 (17.1)  
93 (2.35)  
24.5 (62)  
8.4 (21.4)  
111 (2.83)  
149 (3.79)  
187 (4.75)  
224 (5.7)  
29.4 (75)  
10.1 (25.6)  
13.5 (34.2)  
16.8 (42.7)  
20.2 (51.3)  
25.2 (64.1)  
33.6 (85.4)  
37.0 (94.0)  
42.0 (106.8)  
50.5 (128.2)  
39.2 (100)  
49 (125)  
58.8 (149)  
73.5 (187)  
98.1 (249)  
107.9 (274)  
122.6 (311)  
147.1 (374)  
281 (7.14)  
376 (9.54)  
413 (10.5)  
470 (11.94)  
564 (14.33)  
Position the projector in a horizontal position; other positions can cause heat  
build-up and damage to the projector.  
Keep a space of 30 cm or more between the sides of the projector.  
Do not use the projector in a smoky environment. Smoke residue may build-  
up on critical parts and damage the projector or its performance  
.
Consult with your dealer for special installation such as suspending from a  
ceiling.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
 
Locking control keys  
With the control keys on the projector locked, you can prevent your projector settings  
from being changed accidentally (by children, for example). When the Panel Key  
Lock is on, no control keys on the projector will operate except  
Power.  
1.  
2.  
Press  
on the projector or remote control.  
A confirmation message is displayed. Select  
HDMI1  
Video  
HDMI2  
Compo  
PC  
Yes to confirm.  
To release panel key lock, press and hold  
3 seconds on the projector.  
for  
Swap  
Default  
Important  
Keys on the remote control are still functional when panel key lock is  
enabled.  
If you press  
Power to turn off the projector without disabling panel key  
lock, the projector will still be in locked status the next time it is turned on.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
 
Menu Operation  
The projector has multilingual on-screen display menus that allow you to make image  
adjustments and change a variety of settings.  
Brightest, Standard, Theater 1,  
Theater 2, ViewMatch, User1,  
User2  
Color Mode  
Saturation  
Sharpness  
Tint  
Video Setting  
Color Temp.  
User, LOW, MID, HIGH  
0 - 100  
Red Gain  
0 - 100  
Green Gain  
Blue Gain  
0 - 100  
Red, Green, Blue,  
Cyan, Megenta, Yellow  
Color  
Hue  
-100 - +100  
-100 - +100  
-100 - +100  
Saturation  
Gain  
-5 - +5  
Video/Audio  
-10 - +10  
-10 - +10  
Overscan  
Noise Reduction  
Audio Setting  
0% - 10%  
Off, LOW, MID, HIGH  
Audio in 1, Audio in 2, Audio in 3  
Audio in 1, Audio in 2, Audio in 3  
Computer 1  
Computer 2  
Video Source  
HDMI  
Audio in 1, Audio in 2, Audio in 3  
Audio in 1, Audio in 2, Audio in 3, HDMI  
0 - 10  
Microphone Volume  
Speaker Volume  
0 - 20  
Mute  
Setting  
Auto Keystone  
Keystone  
-30 - +30  
Auto, 4:3, 16:9, 16:10,  
ANAMORPHIC 1,  
ANAMORPHIC 2  
Aspect Ratio  
Front-Table, Front-Ceiling,  
Rear-Table, Rear-Ceiling  
Filter Mode*2  
High Altitude  
Quick Power On  
Quick Power Off  
DC 12V Trigger  
ViewSonic Pro8200  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Input Password  
Password Delete  
Black, Red, Green, Blue,  
Cyan, Yellow, Magenta, White  
OSD Setting  
Top-Left, Bottom-Left,  
Top-Right, Bottom-Right  
OSD Timeout  
20 - 60  
0, 10, 20, 30, 40, 50, 60, 70, 80, 90  
OSD Transparency  
Off, CC1, CC2, CC3, CC4, T1, T2  
Message  
Others  
Zoom  
DCR  
Test Pattern  
Off, PIP, POP  
Yes, No  
Display Type  
Swap  
Function*3  
Computer 1, Computer 2,  
Component, Composite,  
Information  
Input Source  
S-Video, HDMI, USB 1, USB 2  
Filter Hours*2  
Filter Hours Reset*2  
Equivalent Lamp Hours  
Equivalent Lamp Hours  
Reset  
Factory Default  
*1 Adjustable range and default setting vary depending on signal type.  
*2 This function is only available when the projector is installed an optional filter cover.  
*3 The selectable Function list includes Color Mode, Gamma, Overscan, Noise  
Reduction, Keystone and Filter Mode.  
ViewSonic Pro8200  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to operate  
1.  
2.  
3.  
Press MENU on the projector or Menu on the remote control to open the OSD menu.  
When OSD is displayed, use to select any feature in the main menu.  
S
/
T
After selecting the desired main menu item, press  
setting.  
X
to enter sub-menu for feature  
4.  
5.  
Use  
S
/
T
to select the desired item and adjust the settings with  
W
/
X.  
Press MENU on the projector or Menu on the remote control, the screen will return to  
the main menu.  
6.  
To exit OSD, Press MENU on the projector or Menu on the remote control again. The  
OSD menu will close and the projector will automatically save the new settings.  
Picture  
Color Mode  
There are many factory presets optimized for various types of images.  
Brightest  
Standard  
Theater 1  
Theater 2  
ViewMatch  
User 1  
:
:
:
:
:
:
:
For the brightest environment.  
For computer or notebook.  
For home theater.  
For home theater.  
For accuracy color performance.  
Memorize user 1 defined settings.  
Memorize user 2 defined settings.  
User 2  
Brightness  
Brighten or darken the image.  
Contrast  
Set the difference between light and dark areas.  
Video Setting  
Allow you to enter the Video Setting menu.  
Saturation: Adjust a video image from black and white to fully saturated color.  
Sharpness: Sharpen or soften the image.  
Tint: Shift colors toward red or green.  
Color Setting  
Adjust the color temperature. At higher temperature the screen looks colder; at lower  
temperature, the screen looks warmer. If you select “User”, then you can change the  
intensity of each of 3 color (Red, Green, Blue) to customize user color temperature.  
User Color  
User Color provides six sets (RGBCMY) of colors to be adjusted. When you select each  
color, you can independently adjust its range and saturation according to your preference.  
Gamma  
Effect the represent of dark scenery. With greater gamma value, dark scenery will look  
brighter.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Video/Audio  
Frequency  
Adjust the timing of the projector relative to the computer.  
Tracking  
Adjust the phase of the projector relative to the computer.  
H Position (Horizontal Position)  
Adjust the image left or right within the projection area.  
V Position (Vertical Position)  
Adjust the image up or down within the projection area.  
Overscan  
Remove noise around the video image.  
Noise Reduction  
Reduce temporal and/or spatial noise in the image.  
Audio Setting  
Allow you to enter the Audio Setting menu.  
Computer 1: Select the audio input for Computer in 1 signal.  
When Audio in 1 is turned on, Audio in 2 and Audio in 3 will turn off automatically.  
Computer 2: Select the audio input for Computer in 2 signal.  
When Audio in 2 is turned on, Audio in 1 and Audio in 3 will turn off automatically.  
Video Source: Select the audio input for video source.  
When Audio in 3 is turned on, Audio in 1 and Audio in 2 will turn off automatically.  
HDMI: Select the audio input for HDMI signal.  
When HDMI is turned on, Audio in 1, Audio in 2 and Audio in 3 will turn off  
automatically.  
Microphone Volume  
Adjust the microphone’s volume level.  
Speaker Volume  
Adjust the projector’s volume level.  
Mute  
Cut off the sound temporarily.  
Setting  
Auto Keystone  
Automatically correct distorted images resulting from an angled projection.  
Keystone  
Manually correct distorted images resulting from an angled projection.  
When adjusting the Keystone, Auto Keystone will be set at "Off" automatically.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
Aspect Ratio  
Select how the picture fits on the screen:  
Auto : Scales an image proportionally to fit the projector's native resolution in its  
horizontal or vertical width.  
4:3  
:
Scales an image so that it is displayed in the center of the screen with a 4:3  
aspect ratio.  
16:9 : Scales an image so that it is displayed in the center of the screen with a 16:9  
aspect ratio.  
16:10: Scale an image so that it is displayed in the center of the screen with a 16:10  
aspect ratio.  
ANAMORPHIC 1: Scale an image so that it is displayed in the center of the screen  
with a 1.85:1 aspect ratio.  
ANAMORPHIC 2: Scale an image so that it is displayed in the center of the screen  
with a 2.35:1 aspect ratio.  
Projection  
Adjust the picture to match the orientation of the projector: upright or upside-down, in front of  
or behind the screen. Invert or reverse the image accordingly.  
Power Saving  
If the input source is not detected and no operation is performed for a specific period of time,  
projector will automatically turn off.  
Auto Source  
Automatically scan through all the input source.  
Signal Type  
Specify the source to the Computer in 1/Computer in 2 terminal that you wish to project.  
Auto  
: Automatically detect the input signal type from Computer in 1 and Computer  
in 2 terminals.  
RGB : For VGA signal  
YCbCr/YPbPr:For component signal  
ECO Mode  
Use this function to dim the projector lamp light output which will lower power consumption  
and increase lamp life.  
This function will be unavailable when the DCR function is on.  
Filter Mode  
Use this function to activate filter mode after the projector is installed an optional filter cover.  
High Altitude  
Use this function to allow the fans operates at full speed continuously to achieve proper high  
altitude cooling of the projector.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Quick Power On  
Enable the projector to turn on automatically after the power cord has been connected  
and power has been applied.  
Quick Power Off  
Enable the projector to turn off quickly.  
DC 12V Trigger  
Enable or disable to trigger external devices such as an electric screen.  
Option  
Password  
Set or delete the password. When the password function is added, image projection will  
require to input the preset password when turning on the projector.  
Blank Screen  
Blank the screen temporarily, and select the screen color when this function is active.  
OSD Setting  
Allow you to enter the OSD Setting menu.  
Menu Position: Choose the menu location on the display screen.  
OSD Timeout: Duration of OSD menu display countly starts (at idle state by  
second).  
OSD Transparency: Select to change the transparency level of the OSD  
background.  
Closed Caption  
Enable or disable closed captions by selecting CC1 (closed caption1, the most common  
channel), CC2, CC3, CC4, T1, T2 or OFF.  
Others  
Allow you to enter the Others menu.  
Message: Enable or disable the message box at the right bottom of the screen.  
Zoom: Zoom in and out the images.  
DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio  
by darkening the black scenes. Disable DCR will resume to normal contrast  
performance. DCR will impact lamp life and system noise performance.  
Test Pattern: Display embedded test pattern.  
Display Type  
Allow user to select PIP (Picture in Picture) screen, POP (Picture on Picture) screen or  
disable PIP/POP function.  
Swap  
Allow user to swap input source in PIP or POP image.  
Function  
ViewSonic Pro8200  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Allow user to define a short cut key on the remote control, and the function item is selected  
in OSD menu.  
Information  
Input Source  
Display the current input source.  
Resolution  
Display current input source resolution.  
H. Frequency  
Display current image horizontal frequency.  
V. Frequency  
Display current image vertical frequency.  
Filter Hours  
Display the filter’s elapsed operating time (in hours).  
When Filter Mode is turned on, the Filter Hours also turns on automatically.  
Filter Hours Reset  
Reset the filter Hour to 0 hours.  
Equivalent Lamp Hours  
Display the lamp’s elapsed operating time (in hours).  
Equivalent Lamp Hours Reset  
Reset the lamp Hour to 0 hours.  
Factory Default  
Restore settings to factory default.  
Language  
Select the language used by the on-screen menu.  
ViewSonic Pro8200  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
The projector needs proper maintenance. You should keep the lens clean as dust, dirt  
or spots will project on the screen and diminish image quality. If any other parts need  
replacing, contact your dealer or qualified service personnel. When cleaning any part  
of the projector, always switch off and unplug the projector first.  
Warning  
Never open any of the covers on the projector. Dangerous electrical voltages  
inside the projector can cause severe injury. Do not attempt to service this  
product yourself. Refer all servicing to qualified service personnel.  
Cleaning the Lens  
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.  
Cleaning the Projector Housing  
Gently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft cloth  
damped with water, or water and neutral detergent, and wipe dry with a soft, dry cloth.  
Cleaning the Filter Cover  
The filter cover, which is located at the side of the projector, should be cleaned after  
every 100 hours of use. If it is not cleaned periodically, it can become clogged with  
dust and prevent the projector from being ventilated properly. This can cause over  
heating and damage the projector.  
To clean the filter cover:  
1.  
2.  
3.  
Switch the projector off and unplug the AC  
power cord from the wall socket.  
Remove the filter cover as the illustration  
shown.  
Clean the filter cover.  
To clean the filter cover, you are  
advised to use a small vacuum  
cleaner designed for computers and  
other office equipment.  
If the filter cover is torn, replace it.  
Replace the filter cover.  
4.  
5.  
6.  
Attach the filter cover.  
Plug the power back into the projector.  
Turn off the projector and remove the AC power cord from the power outlet  
before beginning maintenance work.  
Make sure the lens is cool before cleaning.  
Do not use detergents or chemicals other than those noted above. Do not use  
benzene or thinners.  
Do not use chemical sprays.  
Use a soft cloth or lens paper only.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
       
Replacing the Lamp  
As the projector operates over time, the brightness of the projector lamp gradually  
decreases and the lamp becomes more susceptible to breakage. We recommend  
replacing the lamp if a warning message is displayed. Do not attempt to replace the  
lamp yourself. Contact the qualified service personnel for replacement.  
The lamp is extremely hot right after turning off the projector. If you touch the  
lamp, you may scald your finger. When you replace the lamp, wait for at least  
45 minutes for the lamp to cool down.  
Do not touch the lamp glass at any time. The lamp may explode due to  
improper handling, including the touching of the lamp glass.  
Lamp lifetime may differ from lamp to lamp and according to the environment  
of use. There is no guarantee of the same lifetime for each lamp. Some lamps  
may fail or terminate their lifetime in a shorter period of time than other similar  
lamps.  
A lamp may explode as a result of vibration, shock or degradation as a result of  
hours of use as its lifetime draws to an end. Risk of explosion may differ  
according to the environment or conditions in which the projector and lamp are  
being used.  
Wear protective gloves and eyeglasses when fixing or detaching the lamp.  
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least  
for 5 minutes to turn off the projector after powering on.  
Do not operate the lamp in proximity to paper, cloth, or other combustible  
material nor cover it with such materials.  
Do not operate the lamp in an atmosphere containing an inflammable  
substance, such as thinner.  
Thoroughly ventilate the area or the room when operating the lamp in an  
oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches,  
nausea, dizziness, and other symptoms.  
The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury  
inside the lamp will be exposed. Leave the area immediately if the lamp  
shatters while being operated and ventilate the area for at least 30 minutes in  
order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to  
user’s health.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
 
1.  
2.  
3.  
4.  
5.  
Turn off the projector.  
If the projector is installed in a ceiling mount, remove it  
Unplug the power cord.  
Loosen the screw in the side of the lamp cover and remove the cover.  
Remove the screws from the lamp module, raise the handle, and lift out the  
module.  
6.  
7.  
8.  
Insert the new lamp module into the projector and tighten the screws.  
Replace the lamp cover and tighten the screw.  
Turn on the projector. If the lamp does not turn on after the warm-up period, try  
reinstalling the lamp.  
9.  
Reset the lamp hour. Refer to the “Information” menu.  
Dispose the used lamp according to local regulations.  
Ensure that screws are tightened properly. Screws not tightened fully may  
result in injury or accidents.  
Since the lamp is made of glass, do not drop the unit and do not scratch the  
glass.  
Do not reuse the old lamp. This could cause the lamp to explode.  
Be sure to turn off the projector and unplug the AC power cord before  
replacing the lamp.  
Do not use the projector with the lamp cover removed.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Specifications  
Display system  
Resolution  
Zoom  
Single 0.65" DLP panel  
1080p (1920 × 1080 pixels)  
1.5X  
F/No.  
2.41 - 2.97  
Focal length  
Screen size  
Lamp  
20.72 - 31mm  
30” - 300”  
230W  
Input terminal  
D-Sub 15-pin x 2, S-Video x 1, Video x 1, Audio signal input (3.5  
mm stereo mini jack) x 2, HDMI x 2, Component RCA jack x 1,  
RCA audio jack (L/R) x 1, 3.5 mm Mic input x1, USB A type x1  
(supports firmware update)  
Output terminal  
D-Sub 15 pin x 1, Audio signal output (3.5 mm stereo mini jack) x  
1
Control terminal  
Speaker  
RS-232 x 1, 12-Vdc trigger output x 1  
10 watt x 2  
Video compatibility  
NTSC, NTSC 4.43  
PAL, PAL-N, PAL M  
SECAM, HDTV (480i/p, 576p, 720p, 1080i/p), Composite video  
Scanning frequency  
Horizontal frequency  
Vertical frequency  
Environment  
31 - 100 KHz  
50 - 120 Hz  
Operating:  
Temperature: 0°C to 40°C  
Humidity: 10%-80%  
Storage:  
Temperature: -20°C to 60°C  
Humidity: 30%-85%  
AC 100-240 V, 50 - 60 Hz, 2.6A  
320 W  
Power requirement  
Power consumption  
Dimension (W x D x H)  
Weight  
334.6 x 264.5 x 109.5 mm  
3.63 kg (8 lb)  
Note: Design and Specifications are subject to change without prior notice.  
ViewSonic Pro8200  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dimensions  
334.6 mm (W) x 264.5 mm (D) x 109.5 mm (H)  
334.6  
64.5  
264.5  
109.5  
84.9  
Ceiling mount installation  
227  
Ceiling mount screws:  
M4 x 8 (Max. L = 8 mm)  
174  
103  
Unit: mm  
ViewSonic Pro8200  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix  
LED Indicator Messages  
LED type  
Color  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Status  
Solid  
Flash  
Flash  
Solid  
Off  
Meaning  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Lamp life end  
Standby mode when green mode is  
turned on.  
Off  
Flash  
Off  
Standby mode when green mode is  
turned off.  
Off  
Solid  
Off  
Powering up  
Off  
Solid  
Off  
Normal operation  
Off  
Flash  
Off  
Powering down  
(The projector needs to cool for 35  
seconds after the power is turned off.)  
Off  
Solid  
Solid  
Flash  
Solid  
Solid  
Off  
The projector system has some  
problems with its fans, so the projector  
cannot start up.  
The lamp has reached its end of life and  
must be changed soon. The lamp will  
continue to opearate until it failes.  
Change the lamp. If the lamp is off, then  
the ballast will become malfuction.  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Solid  
Flash  
Off  
Temperature is too high. The lamp will  
turn off. The fan motor is cooling the  
lamp.  
Off  
The lamp ignition failied. If temperature  
is too high, the fans will cool the lamp.  
Solid  
Solid  
Flash  
Solid  
Off  
The projector needs to cool for 90  
seconds after the power is turned off. If  
you try to re-start the projector, it will  
shut down again.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
   
Compatibility Modes  
Computer:  
Compatibility  
VGA  
Resolution  
H-Sync [KHz]  
24.69  
31.5  
37.9  
37.5  
43.3  
30.99  
35.2  
37.9  
48.1  
46.9  
53.7  
39.63  
48.4  
56.5  
60  
V-Sync [Hz]  
50  
640 x 480  
60  
72  
75  
85  
SVGA  
800 x 600  
50  
56  
60  
72  
75  
85  
XGA  
1024 x 768  
50  
60  
70  
75  
SXGA  
1280 x 1024  
64  
60  
80  
75  
UXGA  
1600 x 1200  
640 x 480  
47.7  
35  
60  
Mac 13  
Mac 16  
Mac 19  
1080i30  
1080i25  
480p  
67  
832 x 624  
49.72  
60.24  
33.75  
28.13  
31.47  
31.25  
45  
75  
1024 x 768  
1920 x 1080  
1920 x 1080  
720 x 480  
75  
60  
50  
59.94  
50  
576p  
720 x 576  
720p60  
720p50  
1080p60  
1080p50  
1280 x 720  
1280 x 720  
1920 x 1080  
1920 x 1080  
60  
37.5  
67.5  
56.25  
50  
60  
50  
ViewSonic Pro8200  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video:  
Compatibility  
1080p  
1080p  
1080i  
1080i  
720p  
Resolution  
1920 x 1080  
1920 x 1080  
1920 x 1080  
1920 x 1080  
1280 x 720  
1280 x 720  
720 x 576  
H-Sync [KHz]  
67.5  
V-Sync [Hz]  
60  
50  
60  
50  
60  
50  
50  
50  
60  
60  
56.3  
33.8  
28.1  
45  
720p  
37.5  
576p  
31.3  
576i  
720 x 576  
15.6  
480p  
720 x 480  
31.5  
480i  
720 x 480  
15.8  
ViewSonic Pro8200  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the symptoms and measures listed below before sending the projector for  
repairs. If the problem persists, contact your local reseller or service center. Please  
refer to "LED Indicator Messages" as well.  
Start-up problems  
If no lights turn on:  
Be sure that the power cord is securely connected to the projector and the other end  
is plugged into an outlet with power.  
Press the power button again.  
Unplug the power cord and wait for a short while, then plug it in and press the power  
button again.  
Image problems  
If the searching source is displayed:  
Press SOURCE on the projector to select an active input source.  
Be sure the external source is turned on and connected.  
For a computer connection, ensure your notebook computer’s external video port is  
turned on. Refer to the computer manual.  
If the image is out of focus:  
Be sure the lens cover is removed.  
While displaying the on-screen menu, adjust the focus ring. (The image size should  
not change; if it does, you are adjusting the zoom, not the focus.)  
Check the projection lens to see if it needs cleaning.  
If the image is flickering or unstable for a computer connection:  
Press MENU on the projector or Menu on the remote control, go to Video/Audio  
and adjust Frequency or Tracking.  
Remote control problems  
If the remote control does not operate:  
Be sure nothing is blocking the remote control receiver on the front of the  
projector. Use the remote control within the effective range.  
Aim the remote control at the screen or at the front or back of the projector.  
Move the remote control so it is more directly in front of or behind the projector and  
not as far to the side.  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
 
RS-232 Command and Configuration  
POWER ON / POWER OFF  
POWER ON  
POWER OFF  
SOURCE SELECT  
Computer 1  
Computer 2  
COMPONENT  
COMPOSITE  
S-VIDEO  
BE,EF,10,05,00,C6,FF,11,11,01,00,01,00  
BE,EF,02,06,00,6D,D2,34,00,00,00,00,00  
BE,EF,02,06,00,BC,D3,35,00,00,00,00,00  
BE,EF,02,06,00,8F,D3,36,00,00,00,00,00  
BE,EF,02,06,00,5E,D2,37,00,00,00,00,00  
BE,EF,02,06,00,A1,D2,38,00,00,00,00,00  
BE,EF,02,06,00,70,D3,39,00,00,00,00,00  
BE,EF,02,06,00,43,D3,3A,00,00,00,00,0  
BE,EF,02,06,00,92,D2,3B,00,00,00,00,00  
HDMI 1  
HDMI 2  
QUICK KEY  
MENU  
BE,EF,02,06,00,C8,D7,01,00,00,00,00,00  
BE,EF,02,06,00,FB,D7,02,00,00,00,00,0  
BE,EF,02,06,00,2A,D6,03,00,00,00,00,00  
BE,EF,02,06,00,9D,D7,04,00,00,00,00,00  
BE,EF,02,06,00,4C,D6,05,00,00,00,00,00  
BE,EF,02,06,00,E6,D6,0F,00,00,00,00,00  
BE,EF,02,06,00,F2,D5,1B,00,00,00,00,00  
BE,EF,02,06,00,C7,D2,3E,00,00,00,00,00  
BE,EF,02,06,00,16,D3,3F,00,00,00,00,0  
BE,EF,02,06,00,D9,D8,40,00,00,00,00,00  
BE,EF,02,06,00,08,D9,41,00,00,00,00,00  
BE,EF,02,06,00,7F,D6,06,00,00,00,00,00  
UP  
DOWN  
LEFT  
RIGHT  
ENTER  
RESYNC  
ASPECT  
MUTE  
FREEZE  
BLANK  
SOURCE  
OTHER FUNCTION  
DCR ON  
BE,EF,02,06,00,EA,D8,43,00,00,00,00,00  
BE,EF,02,06,00,5D,D9,44,00,00,00,00,00  
BE,EF,02,06,00,8C,D8,45,00,00,00,00,0  
BE,EF,02,06,00,BF,D8,46,00,00,00,00,00  
BE,EF,02,06,00,6E,D9,47,00,00,00,00,00  
BE,EF,02,06,00,91,D9,48,00,00,00,00,00  
BE,EF,02,06,00,40,D8,49,00,00,00,00,00  
BE,EF,02,06,00,73,D8,4A,00,00,00,00,00  
BE,EF,02,06,00,A2,D9,4B,00,00,00,00,00  
BE,EF,02,06,00,15,D8,4C,00,00,00,00,00  
BE,EF,02,06,00,C4,D9,4D,00,00,00,00,00  
BE,EF,02,06,00,F7,D9,4E,00,00,00,00,00  
DCR OFF  
ECO ON  
ECO OFF  
VOLUME INC  
VOLUME DEC  
KEYSTONE INC  
KEYSTONE DEC  
FACTORY RESET  
LAMP HOURS RESET  
FILTER HOURS RESET  
Projector status  
ViewSonic Pro8200  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
D-Sub 9 pin  
Wire List  
COLOR  
Black  
1
2
3
4
5
6
7
8
9
1 CD  
RXD  
TXD  
DTR  
GND  
DSR  
RTS  
CTS  
RI  
C1  
C2  
1
1
2
Brown  
Red  
2
3
3
4
Orange  
Yellow  
Green  
Blue  
4
5
5
6
6
7
7
8
9
Purple  
White  
DW  
8
9
SHELL  
SHELL  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
IR Control Code  
System Code: 83F4  
Format : NEC  
87  
6D  
67  
HDMI1  
Video  
HDMI2  
Compo  
PC  
6F  
08  
6E  
82  
8C  
85  
83  
84  
81  
8D  
62  
0B  
8E  
05  
0A  
04  
03  
63  
01  
09  
06  
8F  
Swap  
Default  
ViewSonic Pro8200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
 
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
Note : You will need the product serial number.  
T = Telephone  
F = FAX  
Country/Region  
Website  
Email  
AUS= 1800 880 818  
NZ= 0800 008 822  
Australia/New Zealand  
T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533  
F= 1-909-468-3757  
Canada  
Europe  
Hong Kong  
India  
T= 852 3102 2900  
T= 1800 11 9999  
support/call-desk/  
Ireland (Eire)  
Korea  
T= 080 333 2131  
T= 0800-4441185  
T= 1230-020-7975  
T= 01800-9-157235  
T= 001-8882328722  
Latin America  
(Argentina)  
Latin America (Chile)  
Latin America  
(Columbia)  
Latin America (Mexico)  
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS  
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16  
Latin America (Peru)  
Macau  
ap.viewsonic.com/me/  
T= 0800-54565  
T= 853 2870 0303  
Contact your reseller  
Middle East  
T= 1-800-688-6688 (English)  
T= 1-866-379-1304 (Spanish)  
F= 1-909-468-3757  
Puerto Rico & Virgin Islands www.viewsonic.com  
T= 65 6461 6044  
South Africa  
ap.viewsonic.com/za/  
Contact your reseller  
support/call-desk/  
United Kingdom  
T (Toll-Free)= 1-800-688-6688  
T (Toll)= 1-424-233-2530  
F= 1-909-468-3757  
United States  
ViewSonic Pro8200  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
®
VIEWSONIC PROJECTOR  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal  
use, during the warranty period. If a product proves to be defective in material or workmanship during  
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.  
Replacement product or parts may include remanufactured or refurbished parts or components.  
Limited Three (3) year General Warranty  
Subject to the more limited one (1) year warranty set out below, North and South America: Three (3) years  
warranty for all parts excluding the lamp, three (3) years for labor, and one (1) year for the original lamp  
from the date of the first consumer purchase; Europe except Poland: Three (3) years warranty for all parts  
excluding the lamp, three (3) years for labor, and ninety (90) days for the original lamp from the date of  
the first consumer purchase; Poland: Two (2) years warranty for all parts excluding the lamp, two (2) years  
for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase.  
Limited One (1) year Heavy Usage Warranty:  
Under heavy usage settings, where a projector’s use includes more than four (4) hours average daily  
usage, North and South America: One (1) year warranty for all parts excluding the lamp, one (1) year for  
labor, and ninety (90) days for the original lamp from the date of the first consumer purchase; Europe:  
One (1) year warranty for all parts excluding the lamp, one (1) year for labor, and ninety (90) days for  
the original lamp from the date of the first consumer purchase.  
Other regions or countries: Please check with your local dealer or local ViewSonic office for the  
warranty information.  
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s  
installed lamp only. All accessory lamps purchased separately are warranted for 90 days.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration, failure, or malfunction resulting from:  
a. Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, improper  
maintenance, unauthorized product modification, or failure to follow instructions supplied  
with the product.  
b. Operation outside of product specifications.  
c. Operation of the product for other than the normal intended use or not under normal conditions.  
d. Repair or attempted repair by anyone not authorized by ViewSonic.  
e. Any damage of the product due to shipment.  
f. Removal or installation of the product.  
g. Causes external to the product, such as electric power fluctuations or failure.  
ViewSonic Pro8200  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
h. Use of supplies or parts not meeting ViewSonic’s specifications.  
i. Normal wear and tear.  
j. Any other cause which does not relate to a product defect.  
3. Removal, installation, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer Support  
(please refer to “Customer Support” page). You will need to provide your product’s serial number.  
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name,  
(c) your address, (d) a description of the problem, and (e) the serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service  
center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein  
including the implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not  
be liable for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,  
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,  
interference with business relationships, or other commercial loss, even if advised of the possibility  
of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary from state  
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of  
incidental or consequential damages, so the above limitations and exclusions may not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,  
contact ViewSonic or your local ViewSonic dealer.  
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is  
subject to the terms and conditions of the Maintenance Guarantee Card.  
com under Support/Warranty Information.  
4.3: Projector Warranty  
PRJ_LW01 Rev. 1h 06-25-07  
ViewSonic Pro8200  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mexico Limited Warranty  
®
VIEWSONIC PROJECTOR  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the  
warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic  
will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include  
remanufactured or refurbished parts or components & accessories.  
How long the warranty is effective:  
3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase.  
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only.  
All accessory lamps purchased separately are warranted for 90 days.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification,  
unauthorized attempted repair, or failure to follow instructions supplied with the product.  
b. Any damage of the product due to shipment.  
c. Causes external to the product, such as electrical power fluctuations or failure.  
d. Use of supplies or parts not meeting ViewSonic’s specifications.  
e. Normal wear and tear.  
f. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is  
displayed on the product for an extended period of time.  
4. Removal, installation, insurance, and set-up service charges.  
How to get service:  
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the  
attached Customer Support page). You will need to provide your product’s serial number, so please record the product  
information in the space provided below on your purchase for your future use. Please retain your receipt of proof of  
purchase to support your warranty claim.  
For Your Records  
Product Name: ________________________  
Document Number: ____________________  
Purchase Date: ________________________  
Model Number: __________________________  
Serial Number: ___________________________  
Extended Warranty Purchase? _______________(Y/N)  
If so, what date does warranty expire? _________  
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c)  
your address, (d) a description of the problem, and (e) the serial number of the product.  
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.  
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein including the  
implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of  
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business  
relationships, or other commercial loss, even if advised of the possibility of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
4. Repair or attempted repair by anyone not authorized by ViewSonic.  
ViewSonic Pro8200  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:  
Name, address, of manufacturer and importers:  
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,  
Col. San Fernando Huixquilucan, Estado de México  
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004  
Hermosillo:  
Villahermosa:  
Distribuciones y Servicios Computacionales SA de CV.  
Calle Juarez 284 local 2  
Col. Bugambilias C.P: 83140  
Tel: 01-66-22-14-9005  
Puebla, Pue. (Matriz):  
Compumantenimietnos Garantizados, S.A. de C.V.  
AV. GREGORIO MENDEZ #1504  
COL, FLORIDA C.P. 86040  
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09  
Veracruz, Ver.:  
RENTA Y DATOS, S.A. DE C.V. Domicilio:  
29 SUR 721 COL. LA PAZ  
72160 PUEBLA, PUE.  
CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas # 419  
ENTRE PINZÓN Y ALVARADO  
Fracc. Reforma C.P. 91919  
Tel: 01(52).222.891.55.77 CON 10 LINEAS  
Chihuahua  
Tel: 01-22-91-00-31-67  
Cuernavaca  
Soluciones Globales en Computación  
C. Magisterio # 3321 Col. Magisterial  
Chihuahua, Chih.  
Tel: 4136954  
Distrito Federal:  
Compusupport de Cuernavaca SA de CV  
Francisco Leyva # 178 Col. Miguel Hidalgo  
C.P. 62040, Cuernavaca Morelos  
Tel: 01 777 3180579 / 01 777 3124014  
Guadalajara, Jal.:  
QPLUS, S.A. de C.V.  
SERVICRECE, S.A. de C.V.  
Av. Coyoacán 931  
Av. Niños Héroes # 2281  
Col. Del Valle 03100, México, D.F.  
Tel: 01(52)55-50-00-27-35  
E-Mail : [email protected]  
Col. Arcos Sur, Sector Juárez  
44170, Guadalajara, Jalisco  
Tel: 01(52)33-36-15-15-43  
Monterrey:  
Guerrero Acapulco  
GS Computación (Grupo Sesicomp)  
Progreso #6-A, Colo Centro  
39300 Acapulco, Guerrero  
Tel: 744-48-32627  
Global Product Services  
Mar Caribe # 1987, Esquina con Golfo Pérsico  
Fracc. Bernardo Reyes, CP 64280  
Monterrey N.L. México  
Tel: 8129-5103  
Oaxaca, Oax.:  
MERIDA:  
ELECTROSER  
CENTRO DE DISTRIBUCION Y  
SERVICIO, S.A. de C.V.  
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca  
Tel: 01(52)95-15-15-22-22  
Av Reforma No. 403Gx39 y 41  
Mérida, Yucatán, México CP97000  
Tel: (52) 999-925-1916  
Fax: 01(52)95-15-13-67-00  
FOR USA SUPPORT:  
Tijuana:  
STD  
ViewSonic Corporation  
Av Ferrocarril Sonora #3780 L-C  
Col 20 de Noviembre  
Tijuana, Mexico  
381 Brea Canyon Road, Walnut, CA. 91789 USA  
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);  
Fax: 1-800-685-7276  
4.3: ViewSonic Mexico Limited Warranty  
PRJ_LW03 Rev. 1A 06-25-07  
ViewSonic Pro8200  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

The Speaker Company Label Maker ta200 User Manual
Toshiba Projector 791U User Manual
Triarch Indoor Furnishings 23141 User Manual
Troy Bilt Chipper 47329 User Manual
Ultra Products Indoor Furnishings ULT31354 User Manual
Univex Portable DVD Player PET825 User Manual
Vermont Casting Ventilation Hood DVBR36 User Manual
Villaware Coffeemaker NDVLEM1000 User Manual
Vivotek Security Camera SD8111 User Manual
Walker Lawn Mower DM36 User Manual