XS610
OWNER’S
MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Included in your Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . .3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Radio Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
More Than One Cordless Telephone . . . . . . . . . . . . . . . . . . . . . . . . .6
Battery Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installation
Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting the Telephone Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Charging the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Charging the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Low Battery Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Cleaning the Battery Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Desk or Tabletop Installation
Wall Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Mounting on a Standard Wall Plate . . . . . . . . . . . . . . . . . . . . . . . . . .11
Direct Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Setting up your Phone
Raising the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adjusting Ringer Volume and Earpiece Volume . . . . . . . . . . . . . . . . .13
Using Your Phone
Making and Receiving the Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Storing a Number in Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using the Flash Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Chain Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Erasing a Stored Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Replacing a Stored Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Selecting a Different Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Using the Page/Find Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Travelling out of Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
One-Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
1
Download from Www.Somanuals.com. All Manuals Search And Download.
INCLUDED IN YOUR PACKAGE
To get the most from your
phone, please read this
owner’s manual thoroughly.
Be sure to complete and mail
the product registration form.
Handset
Base
If any of these items are
missing or damaged, contact
your place of purchase
immediately.
AC Adaptor
Rechargeable Battery
(BT434)
Long Telephone
Cord/Plug
Long Telephone Cord
(NZ Only)
Wall Mount
Adaptor
(Australia Only)
G
This Owner’s
Manual
G
G
Registration Card
and other printed
materials
Mounting Screws
2 x Memory Stickers
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT ELECTRICAL CONSIDERATIONS
Unplug all electrical appliances when you know an electrical storm is
approaching. Lighting can pass through your household wiring and damage any
device connected to it. This phone is no exception.
Warning: Please do not attempt to unplug any appliance during an electrical
storm.
Caution: Changes or modifications to this product not expressly approved by Uniden,
or operation of this product in any way other than as detailed by this
Operating Guide, could void your authority to operate this product.
Range
Your new phone is designed to achieve the maximum possible range by
transmitting and receiving according to the highest specifications. We have rated
this phone to operate at a maximum distance with the qualification that the
range depends upon the environment in which the telephone is used. Many
factors limit range, and it would be impossible to include all the variables in our
rating. The Maximum Range rating of this phone is meant to be used as a means
of comparison against other range claims.
Telephone Line Problems
If you are having trouble with your telephone service, you must first disconnect
your phone to determine if it is the cause of your problem. If you determine that it
is the cause, you must leave it disconnected until the trouble has been corrected.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Before you read anything else, please observe the following:
Warning!
UNIDEN DOES NOT represent this unit to be waterproof.
To reduce risk of fire, electrical shock or damage to the unit, DO NOT expose this
unit to rain or moisture.
Rechargeable Nickel-Cadmium Battery Warning
•
•
This equipment contains a rechargeable Ni-Cad battery.
The rechargeable Ni-Cad battery contained in this equipment may explode if
disposed of in fire.
•
•
Do not short-circuit the battery.
Do not charge the rechargeable Ni-Cad battery used in this equipment in any
charger other than the one designed to charge this battery as specified in this
the owner’s manual. Using another charger may damage the battery or
cause the battery to explode.
•
Rechargeable Nickel-Cadmium batteries must be recycled or disposed of
properly!
Warning!
Under power failure, this telephone will not operate. Please ensure that a separate
phone not dependant on local power is available during emergencies.
The exclamation point within a triangle is intended to
alert the user of an important operating or maintenance
instruction.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, these basic safety precautions should always
be followed to reduced the risk of fire, electrical shock, and injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning, and use a dry cloth,
without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bath tub, shower, wash
bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.
5. Do not place this product on an unstable stand, or table. The telephone may
fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are provided for
ventilation. To protect the product from overheating, these openings must not
be blocked or covered. This product should never be placed near or over a
radiator or heat register. This product should not be placed in a built-in
installation unless proper ventilation is provided.
7. This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your
home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be damaged by persons walking on it.
9. Do not overload wall outlets and extension cords, as this can result in the risk
of fire or electrical shock.
10. Never push objects of any kind into this product through cabinet slots, as they
may touch dangerous voltage points or short out parts that could result in a
risk of fire or electrical shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product. Take it to
qualified service personnel when service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when the appliance is
subsequently used.
12. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If Liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the operating
instructions.(Adjust only those controls that are covered by the
5
Download from Www.Somanuals.com. All Manuals Search And Download.
operating instructions. Improper adjustment of other controls may
result in damage and will often require extensive repair work by a
qualified technician.)
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
Radio Interference
Radio interference may occasionally cause buzzing and humming in your cordless
Handset, or clicking noises in the Base Unit. This interference is caused by external
sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical
storm. Your unit is NOT DEFECTIVE. If these noises continue and are too
distracting, please check around your home to see what appliances may be
causing the problem. In addition, we recommend that the Base not be plugged
into a circuit that also powers a major appliance because of the potential for
interference. Be certain that the antenna on the unit is fully extended.
In the unlikely event that you consistently hear other voices or distracting
transmissions on your phone, you may be receiving radio signals from another
cordless telephone or other source of interference. If you cannot eliminate this
type of interference, change to a different channel (refer to page 17).
Finally, it should be noted that some cordless telephones operate at frequencies
that may cause interference to nearby TVs and VCRs. To minimise or prevent such
interference, the base of the cordless telephone should not be placed near or on
top of a TV or VCR. If interference is experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the interference.
More Than One Cordless Telephone
1. If you want to use more than one cordless telephone in your home, they must
operate on different channels. Press the channel key to select a channel that
provides the clearest communication.
2. Each telephone device that you connect draws power from the phone line. We
refer to the power drawn as the devices Ringer Equivalence Number (REN).
The REN is shown at the bottom part of your telephone. If you are using more
than one phone or other device on the line, add up all the RENs. If the total is
more than 3, your phones may not ring.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Congratulations on your purchase of the Uniden XS610 Cordless Telephone. This
phone is designed to exacting standards which provide reliability, long life, and
outstanding performance.
FEATURES
G
G
G
G
G
G
10 Channels (AUS)
25 Channels (NZ)
Random Code™ Digital Security
UltraClear Plus™
AutoTalk™
10 Number Memory
Redial Key
G
G
G
G
G
G
G
G
Flash Key
AutoSecure™
Handset Ringer/Earpiece Volume Controls
Tone Dialing
AutoStandby™
Page/Find Button
10 Day Battery Life
™
AutoTalk allows you to answer a call by just removing the Handset from the
Base so you don’t have to waste time pushing buttons or flipping switches.
™
AutoStandby allows you hang up by simply returning the Handset to the Base.
™
The UltraClear Plus innovative technology, together with 10 (AUS) and
25 (NZ) different channels, virtually eliminates background noise and provides
you with the best possible reception during all of your conversations.
To protect you against misbilled calls which might result from your phone being
activated by other equipment, Random Code digital security automatically
selects one of over 65 thousand digital security codes for the Handset and Base
™
Unit. Also, the AutoSecure feature electronically locks your phone when the
Handset is on the Base.
To get the most from your phone, please read this Operating Guide thoroughly.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Selecting a Location
Before choosing a location for your new phone, there are some important
guidelines you should consider:
• The location should be close to both a phone jack and power outlet.
• Keep the Base Unit and Handset away from sources of electrical noise such as
motors or fluorescent lighting.
• Be sure there is sufficient space to fully extend the Base Unit antenna.
• The Base Unit can be placed on a desk or tabletop or mounted on a wall.
• If you decide to mount your phone on the wall, make sure to change the
handset retainer so that the tab which holds the Handset faces up.
(See page 10 for more information.)
• You should charge your new phone for 15-20 hours before completing the
installation or using the Handset.
Connecting the Telephone Cord
Consider these safety guidelines before connecting the telephone cords:
CAUTION
•
•
•
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals.
Use caution when installing or modifying telephone lines.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery Pack
The rechargeable Nickel-Cadmium battery pack must be fully charged before using
your phone for the first time. Before plugging the phone line into your new phone,
you must charge the battery for approximately 15-20 hours without interruption.
1. Remove the Handset
battery cover.
2. Plug the battery’s cable
into the handset and
place the battery pack
inside the battery
The battery connector will fit
together only one way. Make
sure the connector is
properly aligned. Use only
the Uniden battery pack
(model BT-434)
compartment.
3. Replace the battery cover.
Charging the Handset
Place the handset on the base to charge.
(The handset will charge only in the face-
down position.)
Low Battery Indicator
Replace the handset on the
base after use if convenient.
However recharging the
battery is only necessary
when the low battery
indicator is lit. On a
monthly basis use the phone
until the low battery
indicator appears. Then
charge the battery for 15-20
hours.
When the battery pack in the handset is low and needs
to be charged, the talk/batt LED flashes every
3 seconds.
If this occurs while you are on the phone, you will
hear an alert tone. Complete your call as quickly as
possible, and return the handset to the base for charging.
Cleaning the Battery Contacts
To maintain a good charge, it is important to clean all battery contacts on the
handset and base about once a month. Use a pencil eraser or other contact
cleaner. Do not use any liquids or solvents, or abrasive materials.
contacts
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DESK OR TABLETOP INSTALLATION
1. Plug the AC adaptor cord into the 9V DC input jack on the base.
2. Wrap the AC adaptor cord inside the molded strain-relief.
1
3
Use only the AC adaptor that
came with the phone.
2
5
4
Line in
From
Telephone
Jack
AC
Adaptor
3. Plug one end of the long telephone cord into
the TEL LINE jack on the base.
4. Plug the other end of the telephone cord into
the telephone wall jack. (remember, the phone
must be fully charged before you can use it.)
Use only the AC adaptor that
came with the phone.
5. Plug the AC adaptor into a standard 240V AC
wall outlet.
6. Fully extend the antenna on the base.
Wall Installation
Setting the handset Retainer for Wall mounting
1. Remove the handset retainer on the base
by sliding it upward.
2. Rotate the retainer 180˚ and flip over so
the tab is facing up.
3. Slide the retainer back onto the base.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Fit the Wall Mounting adaptor to the
Bottom of the telephone as shown.
Mounting on a Standard
Wall Plate
Use only the AC adaptor that
came with the phone.
The phone is designed to be mounted on a standard telephone wall plate.
1. Plug the AC adaptor into the base.
2. Place the AC adaptor cord inside the left molded channel cord holder.
3. Plug the telephone cord into the TEL LINE jack on the base.
7
1
3
5
2
4
6
4
AC
Adaptor
Line in
From
Telephone
Jack
4. Place the telephone cord into the right molded channel cord holder and plug
the other end of the cord into the wall jack. (Remember, the phone must be
fully charged before you can use it.)
5. Place the base on the posts of the wall plate, and slide downward to secure.
6. Plug the AC adaptor into a standard 240V AC wall outlet.
7. Fully extend the antenna on the base.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting Directly on a Wall
If you do not have a standard wall plate, you can mount the phone directly on a
wall. Before mounting your cordless telephone, consider the following:
Select a location away from electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting screws into the wall.
Use only the AC adaptor that
came with the phone.
Make sure the wall material is capable of supporting the weight of the base and
handset; otherwise, damage to the unit could result.
Use #10 screws with anchoring devices suitable for the wall material where the
base will be placed.
1. Insert the screws, with their appropriate anchoring devices,
5mm
100mm apart. Allow 5mm between the wall and screw
heads for mounting the phone.
1
2. Fit the Wall Mounting Adaptor to the Base.
100mm
3. Plug the AC adaptor into the base.
4. Place the AC adaptor cord inside the left molded channel
cord holder.
5. Plug one end of the long telephone cord into the TEL
LINE jack on the base.
6. Place the telephone cord into the right molded channel cord holder.
7. Place the base on the screws and push down until it’s firmly seated.
8. Plug the other end of the telephone line into the telephone wall jack.
(Remember; the phone must be fully charged before you can use it.)
9. Plug the AC adaptor into a standard
10
240V AC wall outlet.
3
5
10. Fully extend the antenna on the base.
4
7
6
2
8
Line in
From
9
Telephone
Jack
AC
Adaptor
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR PHONE
Raising the Antenna
Before using your phone, be sure to fully raise the antenna to the vertical position.
ADJUSTING RINGER/EARPIECE
VOLUME CONTROLS
Ringer Tone and Volume
1. While the handset is not in use, press vol/ringer key.
2. The phone has two ringer tones, each with two volume levels. Press vol/ringer
key again until you hear the ringer tone and volume level you want.
Setting the Handset Earpiece Volume
1. While you are on a call, Press vol/ringer key.
2. The phone has three receiver volume levels. Normal, High, and Max. Press
vol/ringer again until you hear the volume level you want.
When you hang up, the phone keeps the last volume setting selected.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING AND RECEIVING CALLS
Handset on Base
Handset off Base
When the phone rings, remove the
handset from the base. (Autotalk)
Press talk key.
Answer call
Make call
1. Pick up the handset and press
1. Remove the handset from the
talk.
base and press talk.
2. The talk LED lights.
3. Listen for the dial tone.
4. Dial the number.
2. The talk LED lights.
3. Listen for the dial tone.
4. Dial the number.
Hang up
Redial
Press talk.
Return handset to the base.
(AutoStandby) or press talk.
1. Pick up the handset and press
1. Remove the handset from the
talk.
base and press talk.
2. Listen for the dial tone.
2. Listen for the dial tone.
3. Press redial to dial the
number.
3. Press redial to dial the
number.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
STORING A NUMBER IN MEMORY
Your XS610 phone has 10 memory locations for storing important telephone
numbers.
You have 20 seconds after
pressing mem to enter the
number you wish to store.
Otherwise, an error tone will
sound.
1. Remove the handset from the base and press mem. The talk/batt low LED
flashes and you hear a beep.
2. Enter the phone number you want to store (up to 16 digits).
3. Press mem and enter a number (0-9) on the keypad for the memory location
you want to use.
You hear a long beep and the talk LED goes out indicating the number has
been stored successfully.
If you select any keys other than 0-9, the handset will beep rapidly (error tone)
and no number will be stored.
Entering a Pause in Memory Dialling
If you would like to use a phone number stored in memory to access voice mail,
for example, you can store a pause in the phone number sequence.
Remember, the phone
number you wish to store
cannot have more than 16
digits, including the pause.
(The pause button counts as
one digit.)
To use this function, follow steps 1 and 2 in “Storing a Number in Memory,”
then press the pause button on the handset to place a pause in the phone
number sequence.
Follow the remaining steps in the “Storing a Number in Memory” section to
complete the operation.
Dialling a Stored Number
To dial a phone number stored in memory, press talk, then press mem and the
memory location (0-9). Your phone will dial the stored number.
If you attempt to dial a
memory location that does
not have a stored number,
the handset will beep rapidly
(error tone) and the phone
will not dial.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE FLASH BUTTON
Australia
If you have the “call waiting” service and a call waiting
tone sounds while you are on a call, press flash then
2 to accept the waiting call. There is a short pause,
then you will hear the new caller. To return to the
original caller press flash then 1.
The flash + 2 call waiting
procedure toggles between
the incoming and original
call (and visa versa).
flash
The flash + 1 procedure
will drop the current call
connection and pick up the
incoming call on hold.
New Zealand
If you have the “call waiting” service and a call waiting
tone sounds while you are on a call, press the flash
button to toggle between the incoming call and the
original call (and visa versa).
flash
CHAIN DIALLING
After dialling a number you may be requested to enter a special access code, for
example, when performing a banking transaction.
1. Store the access code into one of the memory locations (0-9).
2. Dial the main number.
3. Press mem and the memory location where you stored the access code at the
appropriate time.
ERASING A STORED NUMBER
1. Remove the handset from the base.
2. Press mem twice.
3. Press the memory location number (0-9) you want to clear. You hear a long
beep confirming that you have erased the number.
REPLACING A STORED NUMBER
Remember your XS610 phone has 10 memory locations, represented by the
numbers 0-9 on the keypad. If you store a phone number in one of these
locations, then attempt to store a different number in the same location later, the
new number will replace the previous one.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone
you can manually change the phones channel for
clear operation. Interference can come from
appliances or other phones in your home. This
function works only when the phone is in use.
The chan button on the handset allows you to
choose between factory set channels (10 AUS/25NZ).
During the course of a conversation, if you hear static or noise which makes it
difficult to hear, press chan. The talk LED flashes, indicating the phone is
changing to another channel.
USING THE PAGE/FIND FEATURE
The Page/Find feature sends a signal from the base to the handset causing it to
beep. This is useful for locating the handset when it is away from the base. To use
this feature, press page/find on the base. The handset beeps for 60 seconds.
The paging feature does
not work when the phone is
in use.
On the handset press any key (except talk button) or press page/find button on
the base to end the page.
TRAVELLING OUT OF RANGE
When you begin to move too far from the base, you will first hear a clicking
sound. As you travel further out of range, the voice transmission will begin to
break up. If you pass the range limits of the base, your call will terminate.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
If your XS610 cordless telephone is not performing to your expectations, please try
these simple steps first before calling Uniden customer service.
Caution: Do not attempt to service this until yourself. Servicing must be performed by
qualified personnel.
PROBLEM
SUGGESTION
G
Make sure the AC adaptor is plugged into the base and
wall outlet.
Charge light won’t
come on when
handset is placed
in base.
G
G
Make sure the handset is properly seated in base.
Make sure the charging contacts on the handset and base
are clean.
G
G
Make sure that the base antenna is fully extended in the
vertical position.
The audio sounds
weak and/or
scratchy.
Interference by other electronics equipment such as TVs.
Computers microwaves etc.
G
G
You may have gone too far from the base.
Press the chan key to search for clearer reception.
G
G
G
G
Check both ends of the base telephone
line cord.
Make sure the AC adaptor is plugged into the base and
wall outlet.
Can’t make or
receive calls.
Disconnect the AC adaptor for a few minutes, then
reconnect it.
Reset security code by placing the handset back on the
base for a few seconds. The status LED will blink
indicating that the phone has been reset.
G
G
The Nickel-Cadmium battery pack may be weak.
Charge the battery for 15-20 hours.
The handset may be too far away from the base.
The handset
doesn’t ring or
receive a page.
Place the base away from appliances or metal objects.
G
G
Place the base away from appliances or metal objects.
Reset security code by placing the handset back on the
charging cradle for a few seconds. The status LED will
blink indicating that the phone has been reset.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
SUGGESTION
G
G
Check the telephone line cord connectors at both ends
that they are pushed in firmly until they click.
If you had a power failure or had unplugged the base
unit, replace the handset on the base unit for two to five
second to reset the system.
No dial tone.
G
You may have exceeded the Ringer Equivalence Number
(REN) limit of how many phones can be connected to the
same line. The REN total of all devices (printed on the
label on the bottom of each unit) should not exceed three
(3). Disconnect the appropriate units to lower the REN
total.
Does not ring.
G
G
Check the Nickel-Cadmium battery connection inside the
main battery compartment on the handset.
No power on
handset unit
The handset rechargeable Nickel-Cadmium battery pack
may need to be charged.
G
G
G
Make sure the charging contacts on both the base unit
and the handset are in contact during charging.
The charging contacts may need to be cleaned.
Refer to page 9.
Does not charge
Range is limited
The Nickel-Cadmium battery may need to be discharged
first before a full charge.
G
Move the base unit so that it is centrally located in your
residence or office and make sure that the base unit is not
located near appliances.
G
G
The handset rechargeable Nickel-Cadmium battery may
need charging.
Calls received
flutters or fades
You may be out of normal operating range. Move closer to
the base unit.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL
Frequency Control:
Modulation:
PLL
FM
Operating Temperature: -10˚C to 50˚C
BASE UNIT
Receive Frequency:
39.775 to 40.00 MHz (10 channels AUS)
39.800 to 40.450 MHz (25 channels NZ)
Transmit Frequency: 30.075 to 30.300 MHz (10 channels AUS)
30.100 to 30.750 MHz (25 channels NZ)
Power requirements: 230V/240V AC 50 Hz
Size (without antenna): 15mm (W) x 190mm (H) x 55.2mm (D)
Weight:
Approx. 280g
HANDSET
Receive Frequency:
30.075 to 30.000 MHz (10 channels AUS)
30.100 to 30.750 MHz (25 channels NZ)
Transmit Frequency: 39.775 to 40.000 MHz (10 channels AUS)
39.800 to 40.450 MHz (25 channels NZ)
Power requirements: Rechargeable Ni- Cd battery pack (BT434)
Size (without antenna): 55mm (W) x 175.8mm (H) x 39.9mm (D)
Weight:
Battery:
Approx. 280g (including battery)
BT-434
Capacity
Talk mode
300 mAH, 3.6V x 3 (AAA size)
6 hours
Standby mode 10 days
Specifications, features and availability of optional accessories
are all subject to change without prior notice.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
One Year Limited Warranty
Important:
Warrantor:
Evidence of original purchase is required for warranty service.
Uniden Australia Pty Limited ACN 001 865 498
Uniden New Zealand Limited
ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration
of this warranty, its XS610(herein after referred to as the Product), to be free from defects in
materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only, shall
terminate and be of no further effect 12 months after the date of original retail sale. This
warranty will be deemed invalid if the product is; (A) Damaged or not maintained as
reasonable and necessary, (B) Modified, altered or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C) Improperly installed, (D)
Repaired by someone other than an authorised Uniden Repair Agent for a defect or
malfunction covered by this warranty, (E) Used in conjunction with any equipment or
parts or as part of a system not manufactured by Uniden.
PARTS COVERED: This warranty covers for one (1) year, the Base Unit and Handset only.
All accessories (eg. AC Adaptor etc.)are covered for 90 days only.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, the warrantor at its discretion, will
repair the defect or replace the product and return it to you without charge for parts or
service. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN
ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR RIGHTS UNDER THE
CONSUMER GUARANTEE ACT.
WARRANTY CARD: If a warranty card has been included with this product then please
fill it in and return to us within 14 days of purchase. Your name and the Serial number of
the product will then be registered in our database and this will help us process your claim
with greater speed and efficiency should you require warranty service.
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: In the event that
the product does not conform to this warranty, the Product should be shipped or delivered,
freight pre-paid, with evidence of original purchase (eg. a copy of the sales docket), to the
warrantor at:
UNIDEN AUSTRALIA PTY LIMITED
SERVICE DIVISION
345 Princes Highway,
UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION
150 Harris Road,
Rockdale NSW 2216
Ph (02) 9599 3577 Fx (02) 9599 3278
Toll Free 1300 366 895
East Tamaki, Auckland
Ph (9) 273 8383 Fx (9) 274 4253
Toll Free 0800 4 UNIDEN
4 864 336
Customers in other States should ship or deliver the Product freight pre-paid to their nearest
Uniden Authorised Repair Centre (Contact Uniden for the nearest Warranty Agent to you)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2000 Uniden Australia Pty Limited
Uniden New Zealand Limited
UDZZ01584ZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|