Uniden Cordless Telephone EXI7246C User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXI7246/EXI7246C  
Step 3 Set up the Base  
Step 5 Connect to the Phone Line  
Additional Features  
Step 1 Checking the Package Contents  
For more information on these and  
other features, please refer to your  
Owner's Manual. For your  
Plug one end of the  
telephone cord into  
the base TEL LINE  
jack.  
Plug the AC Adapter cord to  
Make sure your cordless phone's  
packaging includes the following items.  
the DC IN 9V jack (yellow) .  
convenience, listed below are  
important features that will help  
you set up your new cordless phone.  
Route the cord.  
Base  
Handset AC adapter Belt Clip  
Handset/Base Set up:  
Plug the other end into the  
telephone wall jack.  
-
Adjust the Earpiece  
Volume P.18  
Wall mount  
adapter  
Also included: • Owner's manual  
Rechargeable  
battery  
Telephone  
cord  
-
-
Set the Ringer Volume P.16  
Set Tone/Pulse Dialing P.15  
Step 6 Make & Receive Calls  
To Make a Call  
Step 2 Install Handset Battery Pack and Charge  
Plug the AC Adapter to a  
120V AC power outlet.  
Press  
talk/flash .  
Listen for dial  
tone.  
Note  
Use ONLY the Uniden recharge-  
able battery pack supplied with  
your new phone!  
Caller ID:  
Note  
Use ONLY the Uniden AC Adapter  
supplied with your new phone!  
Set Caller ID on Call Waiting  
(CIDCW) P.13  
Remove the  
cover.  
Note: You must subscribe to Caller  
ID services through your local  
telephone provider to use Caller  
ID and CIDCW.  
Dial the desired  
number.  
Step 4 Charging the Handset  
To Receive a Call  
Place the handset in  
the base.  
Pick up the handset  
and press talk/flash .  
Make sure that  
charge LED  
Connect the  
battery pack  
with the cor-  
rect polarity.  
Refer to your Owner's Manual  
for detailed operations.  
For questions, contact our Cus-  
tomer Hotline (800) 297-1023. To  
order genuine Uniden parts &  
accessories, contact our Uniden  
Parts Department (800) 554-3988  
illuminates.  
To Hang Up a Call  
Press end or return  
the handset to the  
base.  
ꢀꢀꢀꢀꢀ6QVCNꢀꢁꢀꢂꢂ  
Replace the  
cover.  
Charge the handset 15-20 hours.  
Fully charge the battery pack by placing the  
handset in the base before using phone.  
w w w . u n i d e n . c o m  
Q U I C K R E F E R E N C E G U I D E [ 1 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EXI7246/EXI7246C  
3° Paso Programación de la base  
5° Paso Conexión de la línea telefónica  
Características adicionales  
1
°
Paso Inspección del contenido del embalaje  
Para más información sobre estas y  
otras características, le rogamos que  
consulte su Manual del usuario. Para  
su conveniencia, hemos listado abajo  
unas características importantes, las  
cuales le ayudarán a programar su  
nuevo teléfono inalámbrico de Uniden.  
Conecte un  
Conecte el adaptador CA en el  
extremo de la línea  
telefónica en el  
enchufe TEL  
Asegúrese de que haya recibido los siguientes  
artículos en el paquete (la cantidad de artículos  
puede variar según el modelo que haya comprado)  
enchufe (amarillo) CC IN 9V  
.
LINE en la base.  
RPaosueteetlhceabcloerd.  
Al enchufe telefónico  
Al enchufeTEL LINE  
Pinza para  
la correa  
Adaptador  
CA  
Cable de la línea telefónica  
(suministrado)  
Base Receptor  
Programación del receptor/base:  
Conecte el otro extremo en el  
enchufe telefónico de la pared.  
A la toma CA  
Al enchufe CC IN 9V  
-
Ajuste del volumen del timbre y  
del auricular P.18  
Adaptador para el  
montaje en la pared  
Además va incluido: • Manual del usuario  
Pila  
Cable  
recargable telefónico  
-
-
Programación del volumen del  
6° Paso Realización y recepción de llamadas  
Adaptador CA  
(suministrado)  
timbre P.16  
Para hacer una llamada  
Programación de la marcación  
por tono/pulso P.15  
2° Paso Instalación y carga de la pila para el receptor  
Conecte el adaptador CA en  
una toma de 120V CA.  
Oprima  
talk/flash .  
Nota ¡Use SOLAMENTE el paquete de  
pilas recargable de Uniden sumi-  
nistrado con su nuevo teléfono!  
Note ¡Use SOLAMENTE el adaptador CA de  
Uniden suministrado con su teléfono!  
Identificación de llamadas (Caller ID):  
Espere por el tono  
de marcación.  
Programe la Identificación de llamadas  
en Llamadas en espera (CIDCW)  
P.13  
Quite la tapa.  
Marque el  
número deseado.  
Nota: Usted debe estar suscrito al  
servicio de Identificación de llama-  
das con su proveedor de telefonía  
local para poder usar las caracterís-  
ticas de Caller ID y de CIDCW  
4° Paso Carga del receptor  
Para recibir una llamada  
Coloque el receptor  
en la base.  
Asegúrese de que el  
LED de carga se  
ilumine.  
Levante el receptor y  
oprima  
talk/flash .  
Conecte el  
paquete de  
pilas con la  
polaridad  
correcta.  
Consulte su manual del usuario  
para operaciones más detalladas.  
Si tiene preguntas, comuníquese con  
nuestra Línea Roja para el Consumidor en  
el (800) 297-1023.  
Para comprar partes y accesorios genuinos  
de Uniden, comuníquese con nuestro  
Departamento de Partes de Uniden en el  
(800)554-3988.  
Para colgar una llamada  
Oprima end o  
devuelva el receptor  
a la base.  
ꢀꢀꢀꢀꢀ6QVCNꢀꢁꢀꢂꢂ  
Reponga la  
tapa  
Cargue el receptor de 15 á 20 horas.  
Cargue el paquete de pilas totalmente colocando  
el receptor en la base antes de usar el teléfono.  
w w w . u n i d e n . c o m  
[ 2 ] Q U I C K R E F E R E N C E G U I D E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Call Waiting  
Voice Mail Waiting Indicator  
20  
21  
QUICK REFERENCE GUIDE  
Welcome/Features  
Controls and Functions  
Terms Used in this Manual  
1
4
5
6
RocketDial  
RocketDial  
Storing the RocketDial  
22  
22  
Getting Started  
Using the Speed Dial Memory  
Using the Speed Dial Memory  
Installing the Phone  
7
7
23  
23  
26  
27  
A. Choose the Best Location  
B. Install the Rechargeable Battery Pack into the Handset  
C. Connect the Base Unit and Charge the Handset  
D. Mount the base unit on a wall  
Installing the Beltclip  
Storing Names and Numbers in Speed Dial Memory  
Storing Caller ID messages in Speed Memory Locations  
Making Calls from Speed Dial Memory  
8
9
10  
11  
12  
13  
13  
13  
14  
15  
15  
16  
Caller ID Features  
Caller ID and CIDCW (Caller ID on Call Waiting)  
When the Telephone Rings  
28  
28  
29  
30  
31  
Headset Installation  
Basic Setup  
Viewing the Caller ID Message List  
Deleting Information from the Caller ID List  
Making a Call from the Caller ID List  
Activating AutoTalk  
Activating Caller ID on Call Waiting  
Entering Your Area Code  
Additional Information  
Changing the Digital Security Code  
Note on Power Sources  
General Information  
Troubleshooting  
Choosing the Dialing Mode  
Setting the Language  
32  
33  
35  
36  
38  
39  
41  
42  
43  
Selecting the Ring Tone and Volume  
Basics  
Using Your Phone  
17  
17  
18  
19  
19  
19  
20  
Liquid Damage  
Making and Receiving Calls  
Adjusting the Earpiece Volume  
Tone Dialing Switch-over  
Traveling Out-of-Range  
Selecting a Different Channel  
Find Handset  
Precautions & Warranty  
I.C. Notice  
Index  
Memory List  
w w w . u n i d e n . c o m  
[ 3 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations on your purchase of the Uniden cordless telephone. This phone is designed and  
engineered to exacting standards for reliability, long life, and outstanding performance.  
Welcome  
Features  
Note:Illustrations in this manual are used for explanation purposes. Some  
illustrations in this manual may differ from the actual unit. The color of your  
cordless phone may vary.  
As an Energy Star Partner, Uniden has determined that this product or product  
models meets the Energy Star guidelines for energy efficiency.  
Energy Star is a U.S. registered mark.  
• 2.4GHz Extended Range Technology  
• 3 Line Backlit Display  
• Caller ID and Caller ID on Call Waiting  
• 10 Number Memory Dialing  
• One touch RocketDial®  
• Last Number Redial  
• Voice Mail Waiting Indicator  
• English, French or Spanish Support  
• Pulse/Tone Dialing  
• Find Handset  
• Earpiece Volume Control  
• Ringer Volume Control  
• Hearing Aid Compatible  
• 20 Channel Autoscan  
Uniden® and RocketDial® are registered trademarks of Uniden America Corporation.  
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of  
Uniden America Corporation.  
w w w . u n i d e n . c o m  
[ 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Controls and Functions  
1. Handset antenna  
2. Jack for optional headset  
3. Beltclip hole  
1
4. Handset battery compartment  
5. Handset earpiece  
6. LCD display  
7. caller id/menu key (pages 13 and 28)  
2
3
5
8.  
/
/vol/  
(earpiece volume, ringer  
volume and scroll) key (pages 13, 16 and  
18)  
6
9.  
/tone/key (left cursor) key  
12  
13  
*
7
8
(pages 19 and 23)  
10. redial/pause key (pages 18 and 25)  
11. select key (page 13)  
14  
12. Rocketdial key (page 22)  
13. talk/flash key (pages 17 and 20)  
14. end key (pages 17 and 18)  
15. #/(right cursor) key (page 23)  
16. memory key (page 23)  
17. delete/channel key (pages 19, 23 and 30)  
18. Handset microphone and ringer speaker  
19. Handset charging contacts  
4
15  
16  
17  
9
10  
11  
18  
19  
w w w . u n i d e n . c o m  
C O N T R O L S & F U N C T I O N S [ 5 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
20. Base charging contacts  
21. find handset key (pages 20 and 32)  
22. charge/in use and VMWI  
(Voice Mail Waiting Indicator) LED  
23. DC IN 9V jack  
24. Telephone line jack  
20  
21  
22  
23  
24  
Terms Used in this Manual  
• Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk/flash key has not  
been pressed and there is no dial tone.  
• Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone.  
• CID - Caller ID  
• CIDCW - Caller ID on Call Waiting  
• RocketDial - One touch speed dial  
w w w . u n i d e n . c o m  
[ 6 ] C O N T R O L S & F U N C T I O N S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installing the Phone  
Do the following steps:  
note  
A. Choose the Best Location  
B. Install the Rechargeable Battery Pack into the Handset  
C. Connect the Base Unit and Charge the Handset  
D. Mount the Base Unit on a Wall  
If your home has  
specially wired alarm  
equipment connected to  
the telephone line, be  
sure that installing the  
system does not disable  
your alarm equipment.  
A. Choose the Best Location  
When choosing a location for your new phone, here are some important guidelines you should  
consider:  
Avoid heat sources, such as radiators,  
air ducts, and sunlight  
Avoid noise sources such as a window by  
a street with heavy traffic  
If you have questions  
about what will disable  
your alarm equipment,  
contact your telephone  
company or a qualified  
installer.  
Avoid television sets and other  
electronic equipment  
Avoid microwave ovens  
Avoid excessive moisture,  
extremely low temperatures, dust,  
mechanical vibration, or shock  
Choose a central location  
Avoid personal computers  
Avoid other cordless telephones  
• The location should be close to both a phone jack and a continuous power outlet (one  
which is not connected to a switch).  
• The base and handset should be kept away from sources of electrical noise such as motors,  
microwave ovens, and fluorescent lighting.  
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.  
• There should be enough space to fully extend the antenna.  
w w w . u n i d e n . c o m  
G E T T I N G S T A R T E D [ 7 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
B. Install the Rechargeable Battery Pack into the Handset  
The handset is powered by a rechargeable battery pack.  
The battery recharges automatically when the handset is placed  
in the base unit.  
!
•Use only the Uniden  
(BT-905) rechargeable  
battery pack supplied  
with your cordless  
telephone.  
1) Press down on the handset battery case cover (use the  
finger indention for a better grip) and slide the cover  
downward to remove.  
2) Plug the battery pack connector (red & black wires) into the  
jack inside the battery compartment.  
•Replacement batteries  
are also available  
through the Uniden  
Parts Department at  
(800) 554-3988,  
(The connector notches fit into the grooves of the jack only  
one way.) Match the wire colors to the polarity label in the  
battery compartment, connect the battery and listen for a  
click to insure connection.  
Monday through Friday  
from 8:00 a.m. to 5:00  
p.m. or online at  
3) Make sure you have a good connection by slightly pulling on  
the battery wires. If the connection is secure, the battery  
jack will remain in place.  
4) Place the battery case cover back in the handset by sliding  
it upwards until it clicks into place.  
[ 8 ] G E T T I N G S T A R T E D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
C. Connect the Base Unit and Charge the Handset  
1) Connect the AC adapter to the DC IN 9V jack and to  
Route the cord.  
a standard 120V AC wall outlet.  
!
2) Place the handset in the base unit with the keypad  
facing forward.  
Use only the supplied  
AD-0001 AC adapter.  
Do not use any other  
AC adapter.  
3) Make sure the charge/in use LED illuminates.  
If the LED does not illuminate, check to see that the AC  
adapter is plugged in and the handset makes good  
contact with the base charging contacts.  
•Do not place the power  
cord where it creates a  
trip hazard or where it  
could become chafed  
and create a fire or  
electrical hazard.  
• Connect the AC adapter to a continuous power  
supply.  
• Place the base unit close to the AC outlet so that  
you can unplug the AC adapter easily.  
4) Charge your handset at least 15-20 hours before  
plugging into the phone line.  
5) Once the handset battery pack is fully charged,  
connect the telephone line cord to the TEL  
LINE jack and a telephone outlet.  
If your telephone outlet isn't modular, contact  
your telephone company for assistance.  
Modular  
w w w . u n i d e n . c o m  
G E T T I N G S T A R T E D [ 9 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
D. Mount the base unit on a wall  
Standard wall plate mounting  
This phone can be mounted on any  
standard wall plate.  
1) Locate the base unit on the wall  
mount adapter as shown and slide  
the wall mount adapter into the  
notches on the base bottom with the  
tab pressed.  
2
5
2) Plug the AC adapter to the DC IN 9V  
7
7
jack.  
3) Route the AC adapter cord through  
the molded wiring channel as shown.  
1
6
4) Plug the AC adapter into a standard  
120V AC wall outlet.  
3
5) Plug the telephone line cord into the  
TEL LINE jack. Route the cord  
through the molded wiring channel  
as shown.  
4
6) Plug the telephone line cord into the  
telephone outlet.  
7) Align the mounting slots on the base  
with the mounting posts on the wall.  
Then push in and down until the  
phone is firmly seated.  
[ 1 0 ] G E T T I N G S T A R T E D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Direct wall mounting  
If you don't have a standard wall plate, you can mount your phone  
directly to the wall. Before doing this, consider the following:  
• Avoid electrical cables, pipes, or other items behind the mounting  
location that could cause a hazard when inserting screws into the  
wall.  
• Try to mount your phone within 5 feet of a working phone jack to  
avoid excessive cord lengths.  
• Make sure the wall material is capable of supporting the weight of  
the base and handset.  
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring  
devices suitable for the wall material where the base unit will be  
placed.  
1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-  
15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for  
mounting the phone.  
2) Refer to steps 1 through 7 on page 10 to mount the telephone.  
Installing the Beltclip  
To attach the beltclip  
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.  
To remove the beltclip  
Pull both sides of the beltclip to release the tabs from the holes.  
w w w . u n i d e n . c o m  
G E T T I N G S T A R T E D [ 1 1 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Headset Installation  
Your phone may be used with an optional headset, the Uniden HS910.  
To use this feature, insert the headset plug into the headset jack.  
Your phone is ready for hands-free conversations.  
(Headset may be purchased by calling the Uniden Parts Department or  
visiting the web site. See page 35.)  
[ 1 2 ] G E T T I N G S T A R T E D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Basic Setup  
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call  
Waiting), Area Code, Dial Mode and Language.  
Activating AutoTalk  
AutoTalk allows you to answer the phone simply by removing the handset from the base. You  
do not have to press any keys.  
1) When the phone is in standby mode, press and hold the caller id/  
menu key. The following screen appears.  
2) Press the select key to turn AutoTalk on.  
3) Press the end key to complete the setting. The handset returns to standby mode.  
Activating Caller ID on Call Waiting  
Caller ID allows you to see the name and number of the calling party before you answer the  
phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that  
comes in when you are on the line.  
You must subscribe to Caller ID service through your local telephone provider to use this  
feature.  
1) When the phone is in standby mode, press and hold the caller id/  
menu key. The following screen appears.  
w w w . u n i d e n . c o m  
G E T T I N G S T A R T E D [ 1 3 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
2) Press the  
/vol/  
key to select CIDCW.  
3) Press the select key to toggle and turn on Caller ID on Call Waiting.  
4) Press the end key and return the handset to the base unit to complete the setting. The  
handset returns to standby mode.  
Entering Your Area Code  
If you enter a 3-digit area code number in the Area Code option, your local area code does not  
appear in Caller ID messages. Do not program this option if your calling area requires 10-digit  
dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For  
calls received from outside your local area code, you will see a full 10-digit number.  
1) When the phone is in standby mode, press and hold the caller id/  
menu key. The following screen appears.  
2) Press the  
/vol/  
key twice to select Area Code.  
3) Press the select key. If an area code was already stored, the  
phone will display it.  
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you  
make an error, use the delete/channel key to backspace.  
5) Press the select key. A confirmation tone sounds.  
6) Press the end key to complete the setting. The handset returns to standby mode.  
[ 1 4 ] G E T T I N G S T A R T E D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
 
Choosing the Dialing Mode  
Most phone systems use tone dialing. However some phone systems (such as in rural areas)  
still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default  
setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to  
change the dialing mode:  
note  
•If you are not sure of  
your dialing system,  
make a trial call. If the  
call connects, leave  
the setting as is.  
Otherwise, set for  
pulse dialing.  
1) When the phone is in standby mode, press and hold the caller id/  
menu key. The following screen appears.  
2) Press the  
/vol/  
key three times to select Dial.  
3) Press the select key to set the phone to pulse dialing.  
•If your phone system  
requires pulse dialing  
and you need to send  
DTMF tones during a  
call, you can  
4) Press the end key to complete the setting. The handset returns to  
standby mode.  
Setting the Language  
There are three languages to choose from; English, French and Spanish.  
temporarily switch  
over to tone dialing.  
(Refer to “Tone Dialing  
Switch-over” on  
1) When the phone is in standby mode, press and hold the caller id/  
page 19.)  
menu key. The following screen appears.  
2) Press the  
/vol/  
key four times to select Language.  
3) Press the select key to select Eng, Fr. or Esp.  
4) Press the end key to complete the setting. The handset returns to  
standby mode.  
w w w . u n i d e n . c o m  
G E T T I N G S T A R T E D [ 1 5 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Selecting the Ring Tone and Volume  
Your phone has five different ringer tone/volume combinations you can choose from.  
1) With the phone in standby mode, press the  
2) The phone will sound the different ring tones at different volumes.  
3) When the phone sounds the ring tone and volume you wish to use, press the end key.  
/vol/  
or  
/vol/  
key.  
[ 1 6 ] G E T T I N G S T A R T E D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Using Your Phone  
note  
Making and Receiving Calls  
Making a call  
Refer to page 13  
"Basic Setup" to turn on  
the AutoTalk feature if  
desired.  
1) Remove the handset from the base.  
2) Press the talk/flash key.  
3) Listen for the dial tone.  
4) Dial the number.  
OR  
1) Remove the handset from the base.  
2) Dial the number.  
3) Press the talk/flash key.  
Receiving a call  
1) Remove the handset from the base. (If AutoTalk is on, the phone will automatically  
answer the call when you pick it up.)  
2) Press the talk/flash key.  
OR  
1) If the handset is off the base, press the talk/flash key or any number key. (AutoTalk is  
on.)  
Hanging up  
Press the end key or return the handset to the base.  
w w w . u n i d e n . c o m  
B A S I C S [ 1 7 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Redialing the last dialed number  
1) Remove the handset from the base.  
2) Press the talk/flash key.  
3) Listen for the dial tone.  
4) Press the redial/pause key.  
OR  
1) Remove the handset from the base.  
2) Press the redial/pause key.  
3) Press the talk/flash key.  
Adjusting the Earpiece Volume  
To change the earpiece volume, press the /vol/ or /vol/  
key during a call.  
Temporarily Mute Ringer  
If the handset is off the base while an incoming call is ringing,  
simply press the end key to temporarily mute the incoming ring.  
The ringer will sound with the next incoming call.  
[ 1 8 ] B A S I C S  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Tone Dialing Switch-over  
If your telephone company requires pulse dialing, you can switch-  
over to tone dialing after the call connects. This feature is useful  
when you need tone dialing to use any automated menu systems,  
such as telephone bank tellers, telephone prescription refills,  
customer support menus, etc.  
note  
TM  
The UltraClear Plus  
true compander circuitry  
virtually eliminates  
background noise. This  
innovative technology,  
together with 20  
If your phone is set to pulse dialing mode, make your call  
normally. Once your call connects, press the /tone/key. Any  
*
digits you enter from then on will be sent as tone digits. When  
this particular call ends, the phone automatically returns to pulse dialing mode.  
different channels,  
provides you with the  
best possible reception  
during all your  
Traveling Out-of-Range  
During a call, as you begin to move your handset too far from your base unit, noise  
increases. If you pass the range limits of the base unit, your call will terminate within one  
minute.  
conversations.  
Selecting a Different Channel  
If you encounter interference while using your phone, you can manually change the phone´s  
channel for clear operation. While using your phone, press the delete/channel key. Scanning  
appears on the display, indicating the phone is changing to another channel. For more  
information on interference, refer to "Precautions" on page 40.  
w w w . u n i d e n . c o m  
B A S I C S [ 1 9 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Find Handset  
To locate the handset, press the find handset key on the base. The  
handset beeps for 60 seconds.  
Paging is canceled when pressing any handset key, the find handset  
key on the base or the handset is returned to the base.  
Paging is also canceled when the phone receives an incoming call.  
Using Call Waiting  
If you have Call Waiting service, you can receive calls while on  
the line.  
1) If a call comes in while you are on the phone, you will hear a  
call waiting tone. If you have CIDCW activated, you will see  
the name and number of the incoming caller.  
2) Press the talk/flash key to accept the waiting call. After a  
short pause, you will hear the new caller.  
3) To return to the original caller, press the talk/flash key again.  
You must subscribe through your local telephone company to receive Call Waiting  
service.  
[ 2 0 ] B A S I C S  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Voice Mail Waiting Indicator  
If you subscribe to voice mail service, you can use your cordless telephone to access your  
voice mailbox. The charge/in use LED on the base of your phone flashes whenever you have  
messages waiting in your voice mailbox.  
note  
You must subscribe to  
voice mail service from  
your telephone company  
in order to use this fea-  
ture. The voice mail  
company will provide  
you with the access  
number.  
Just dial the access number supplied by your voice mail provider to enter your mailbox.  
You can program your voice mail access number to a speed dial number.  
If the voice mail waiting indicator remains on after you have retrieved your messages, press  
and hold the find handset key for 5 seconds. This will reset the indicator.  
w w w . u n i d e n . c o m  
B A S I C S [ 2 1 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RocketDial  
RocketDial is a one-touch speed dial key. Store your most  
important or most frequently called number as your RocketDial  
number. Then, simply press the RocketDial key, and your phone  
will automatically dial the number.  
Storing the RocketDial  
1) When the phone is in standby mode, press and hold the  
RocketDial key. The following display appears.  
If the RocketDial number is already programmed, the Edit screen  
appears. You can select Edit to edit this entry, select Delete to  
erase this entry or select Go Back to return to the standby mode.  
2) Store the number by following step 6 under “Storing Names and  
Numbers in Speed Dial Memory” on page 25.  
3) Press the select key.  
You hear a confirmation tone, and Number Storedappears.  
Memory storage is complete.  
[ 2 2 ] R O C K E T D I A L  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the Speed Dial Memory  
The speed dial memory allows you to store up to 10 names and numbers in the handset. You  
can dial these numbers with just a few key presses.  
note  
The speed dial memory is not limited to phone numbers. You can store any number (up to 20  
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.  
For example, you can save your bank account number to speed dial memory. When you call  
your bank's telephone teller service and are prompted to enter your account number, simply  
press the memory key and the speed dial number where you stored your account number.  
Then press the select key.  
When editing the speed  
dial memory, you must  
press a key within 30  
seconds or the phone  
will return to standby  
mode. If you return the  
handset to the base, the  
phone will return to  
standby mode also.  
Storing Names and Numbers in Speed Dial Memory  
1) With the phone in standby mode, press the memory key.  
2) Enter 0-9 to select the speed dial number where you would like to  
store this entry. You can also scroll through the list with the  
/
vol/ and /vol/  
keys. Press the select key twice.  
3) Store Name appears and a cursor flashes indicating that the  
display is ready for the name to be entered.  
If the selected speed dial number is already assigned, the Edit  
screen appears. You can select Edit to edit this entry, select  
Delete to erase this entry, delete this entry, or select Go Back to  
choose another speed dial number.  
w w w . u n i d e n . c o m  
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 3 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4) Enter a name according to the instructions below, then press the select key. If no name is  
required, go to step 5.  
• The name can be up to 13 characters.  
note  
• Use the #/and /tone/keys to move the cursor to the desired location.  
*
• Use the delete/channel key to delete characters as needed.  
• Press and hold the delete/channel key to delete all the characters.  
If the next character  
uses the same number  
key, you must press the  
#/key to move the  
cursor over. Otherwise  
the next time you press  
the number key, it  
Refer to the letters on the number keys to select the desired characters.  
With each press of a numeric key, the displayed character appears in the following order:  
Upper case letters first, lower case letters next and finally the number corresponding to  
the key.  
If you make a mistake while entering a name  
changes the character  
that was previously set.  
Use the /tone/or #/key to move the cursor to the incorrect character.  
*
Press the delete/channel key to erase the wrong character. Then enter the correct  
character. To delete all characters, press and hold the delete/channel key.  
Number of times key is pressed  
For example, to enter Movies.  
keys  
1
2
3
4
5
6
7
8
9
1) Press 6. Then press the #/key to  
move the cursor to the right.  
2) Press 6 six times.  
1
2abc  
3def  
3) Press 8 six times.  
4ghi  
5jkl  
4) Press 4 six times.  
6mno  
5) Press 3 five times.  
7pqrs  
8tuv  
6) Press 7 eight times.  
9wxyz  
0oper  
[ 2 4 ] U S I N G T H E S P E E D D I A L M E M O R Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
5) Store Number is displayed. The cursor flashes indicating that the  
display is ready for the number to be entered.  
6) Use the keypad to enter the phone number; each number can be  
up to 20 digits.  
If you need the phone to pause during the dialing sequence, press  
the redial/pause key to insert a two-second delay between the  
numbers. You can enter multiple pauses to increase the delay.  
Each pause counts as a digit. The display shows a  
pause.  
P
for every  
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more  
than 30 seconds, it will beep rapidly, and the phone will return to standby mode.  
7) Press the memory key. You will hear a confirmation tone, and the  
following screen appears.  
Memory storage is complete.  
After about 2 seconds, the following screen displays all the speed  
dial memory entries.  
8) Press the end key to exit memory setup mode. The phone returns  
to standby.  
w w w . u n i d e n . c o m  
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 5 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Storing Caller ID messages in Speed Memory Locations  
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory  
dialing. For instructions on viewing the Caller ID Message list, see page 29.  
note  
1) Press the caller id/menu key. Select the phone number to be  
You cannot store a  
Caller ID message if no  
phone number appears  
in the message.  
stored from the Caller ID list by pressing the  
/vol/ or  
/
vol/ key.  
2) Press the memory key.  
3) Enter a number (0 - 9) or press the /vol/ or  
/vol/  
key to select the memory  
location to be stored.  
4) Press the select key. You hear a confirmation tone, and the  
number is stored in memory. The display returns to the Caller ID  
list.  
If a message has already been stored in the selected memory  
number location, a confirmation screen is displayed.  
Press the  
/vol/  
key to select Yes. Press the select key to  
overwrite. The display returns to the Caller ID list.  
[ 2 6 ] U S I N G T H E S P E E D D I A L M E M O R Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
 
Making Calls from Speed Dial Memory  
1) Press the memory key. The handset displays your programmed  
speed dial number.  
2) Enter the number (0 - 9), or press the /vol/ or  
/vol/  
key to select the speed dial number you would like to dial.  
3) Press the talk/flash key. Talkand the number selected appear on  
the display. Then the displayed number is dialed.  
To cancel speed dialing  
Press the end key to cancel speed dialing. The handset returns to standby mode.  
Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to  
standby mode.  
w w w . u n i d e n . c o m  
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 7 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Caller ID and CIDCW (Caller ID on Call Waiting)  
You must subscribe to Caller ID service through your local telephone provider to use  
this feature. When the telephone rings, the Caller ID feature allows you to view the caller’s  
name, phone number, date and time of call. With CIDCW (Caller ID on Call Waiting), you will  
hear a Call Waiting tone while you are on a call, and the Caller ID data is displayed. To accept  
the waiting call, press the talk/flash key (see page 20).  
note  
•If you answer a call  
before the Caller ID  
message is received  
(for example, before  
the second ring), the  
Caller ID message will  
not appear.  
Additionally, you can dial a number stored in the Caller ID list or save data to your Memory  
dial list.  
When the Telephone Rings  
When the Caller ID message is received, the display shows the caller´s phone number along  
with the date and time. The incoming call information is stored in the Caller ID record. If the  
Caller ID service includes the caller´s name, the caller´s name appears on the display (up to  
15 letters).  
•When the call is  
received via a  
telephone company  
that does not offer  
Caller ID service, the  
caller´s phone number  
and name do not  
The date and  
time received  
Caller's name  
Caller's phone number  
appear. (This includes  
international calls.)  
You may receive any one of the following messages:  
•When the call is via a  
private branch  
exchange (PBX), the  
caller´s phone number  
and name may not  
appear.  
When invalid data is received  
Incomplete Data  
When a private name is received  
When a private number is received  
When a unknown name is received  
Private Name  
Private Number  
Unknown Name  
When a unknown number is received Unknown Number  
Data errors appear as ¨ ¨.  
[ 2 8 ] C A L L E R I D F E A T U R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
     
Viewing the Caller ID Message List  
The Caller ID list stores information for up to 30 incoming calls - even unanswered calls.  
note  
1) With the phone in standby mode, press the caller id/menu key.  
The summary screen appears. The screen shows the number of new  
messages and total messages.  
•In Caller ID operation,  
if no key is pressed for  
more than 30 seconds,  
an error tone sounds  
and the telephone  
returns to standby  
mode.  
2) To view the Caller ID messages in historical order (from new to  
old or from old to new), repeatedly press the /vol/  
key to  
scroll through the messages from the latest to the earliest, or the  
/vol/ key to scroll back through the messages.  
•Each message can be  
up to 15 characters for  
the name and 15 digits  
for the phone number.  
3) Press the end key to return to standby mode.  
•The number of calls  
from the same Caller ID  
appears next to the  
received time. Once  
you view the new  
message, the number  
will be cleared and  
disappear.  
w w w . u n i d e n . c o m  
C A L L E R I D F E A T U R E S [ 2 9 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Deleting Information from the Caller ID List  
The cordless phone stores up to 30 Caller ID names/numbers. If the phone receives the 31st  
Caller ID, the oldest one in the list is automatically deleted. Caller ID data can also be  
deleted manually.  
note  
•While using the Delete  
All?or Delete  
Deleting a Caller ID message  
1) Press the caller id/menu key in standby mode. Find the message  
to be deleted from the Caller ID list by pressing the /vol/ or  
/vol/ key.  
Message? screen, if no  
key is pressed for more  
than 30 seconds, an  
error tone sounds, and  
the handset returns to  
standby mode.  
2) Press the delete/channel key.  
3) Press the  
/vol/  
or /vol/  
key to select Yes, and then  
•If you get an incoming  
call or page, the  
deleting operation is  
canceled, and you can  
answer the call or  
page.  
press the select key.  
Deleting all Caller ID names/numbers  
1) With the phone in standby mode, press the caller id/menu key.  
2) Press the delete/channel key.  
3) Press the  
/vol/  
or /vol/  
key to select Yes, and then  
press the select key.  
You hear a confirmation tone and all stored Caller ID messages are  
deleted.  
[ 3 0 ] C A L L E R I D F E A T U R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Making a Call from the Caller ID List  
You can place a call from the Caller ID list.  
note  
1) Press the caller id/menu key in standby mode. Select the phone  
number that you want to dial by pressing the /vol/  
or  
/
vol/ key.  
You cannot make a call  
from the Caller ID list if  
your cordless phone is  
connected to a private  
branch exchange (PBX).  
2) To have the phone dial a "1" before the displayed Caller ID number, press 1. To have the  
phone dial the stored area code before the displayed Caller ID number, press 3.  
3) Press the talk/flash key. The displayed phone number dials automatically.  
w w w . u n i d e n . c o m  
C A L L E R I D F E A T U R E S [ 3 1 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Changing the Digital Security Code  
To protect you against misbilled calls which might result from your phone being activated by  
TM  
other equipment, the cordless phone provides AutoSecure (which electrically locks your phone  
TM  
when the handset is in the base) and Random Code digital security which automatically selects  
one of over 262,000 digital security codes for the handset and base.  
If the handset battery pack is completely discharged or the battery pack is removed, the digital  
security code will be lost. If this happens, a new security code is set automatically the next time  
the battery pack is charged. In the rare situation that you suspect another cordless telephone  
is using the same security code, you can change the code.  
1) Remove the handset from the base unit. Press and hold the find handset key on the base.  
2) While holding the find handset key, place the handset in the base unit, and leave the  
handset in the base for more than 3 seconds. A new random security code is set.  
[ 3 2 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Note on Power Sources  
Low battery alert  
When the battery pack is very low and needs to be charged, the phone is  
programmed to eliminate functions in order to save power. If the phone is not in  
use, Low Battery appears on the LCD and none of the keys will operate.  
If the phone is in use, Low Battery flashes and the handset beeps. Complete your  
conversation as quickly as possible and return the handset to the base unit for  
charging.  
Information stored in the phone's memory will be retained for 30 minutes after  
the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, RocketDial  
programming, and the CID list.  
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum  
performance, be sure to return the handset to the base unit after a telephone call.  
Battery replacement and handling  
When the operating time becomes short even after a battery is recharged, please replace the battery.  
With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden  
Parts Department for a replacement battery.  
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden  
battery model and Uniden adapter model specifically designated for this product.  
Caution  
Power Failure  
During the period that the power is off, you will not  
be able to make or receive calls with the telephone.  
• Use only the specified Uniden battery pack (BT-905).  
• Do not remove the battery from the handset to charge it.  
• Never throw the battery into a fire, disassemble it, or heat it.  
• Do not remove or damage the battery casing.  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 3 3 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Cleaning the battery charging contacts  
To maintain a good charge, clean the charging contacts on the handset  
once a month.  
Dampen a cloth with plain water. Gently rub the damp cloth over the  
charging contacts until all visible dirt is removed. Dry the contacts  
thoroughly before returning the handset to the base.  
Caution  
Do not use paint thinner, benzene,  
alcohol, or other chemical products.  
Doing so may discolor the surface of  
the telephone and damage the finish.  
[ 3 4 ] A D D I T I O N A L I N F O R M A T I O N  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
General Information  
The phone complies with FCC Parts 15 and 68.  
Operating temperature: -10°C to +50°C (+14°F to +122°F)  
AC Adapter Information  
AC Adapter part number:  
Input Voltage:  
AD-0001  
120V AC 60Hz  
9V DC 210 mA  
Output Voltage:  
Battery Information  
Battery part number:  
Capacity:  
BT-905  
600 mAh, 3.6V  
Frequency  
924.516925 - 926.704425 MHz  
2,405.155942 - 2,411.718441 MHz  
To avoid damage to the phone use only Uniden AD-0001 and BT905 with your phone.  
•If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of  
time the handset is off the base.  
Recharge your phone on a regular basis by returning the handset to the base after each phone call.  
When the operating time becomes short, even after the battery is recharged, please replace the battery.  
With normal usage, the battery should last about one year.  
A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting the Uniden  
Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday. We  
are all subject to change without prior notice.  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 3 5 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Troubleshooting  
If your phone is not performing to your expectations, please try these simple steps first.  
Symptom  
Suggestion  
The charge/in use LED won't  
• Make sure the AC adapter is plugged into the base and wall outlet.  
illuminate when the handset is • Make sure the handset is properly seated in the base.  
placed in the base.  
• Make sure the charging contacts on the handset are clean.  
The audio sounds weak and/or  
scratchy.  
• Move the handset and/or base away from metal objects or appliances and try again.  
• Press the delete/channel key in the Talk mode to help eliminate background noise.  
• Make sure that the handset is not too far from the base.  
Can't make or receive calls.  
• Check both ends of the telephone line cord.  
• Make sure the AC adapter is plugged into the base and wall outlet.  
• Disconnect the AC adapter for a few minutes. Then reconnect it.  
• Change the digital security code (see page 32).  
• Make sure that the handset is not too far from the base.  
• Check the dialing mode used by your telephone company.  
[ 3 6 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Symptom  
Suggestion  
The handset doesn't ring or  
receive a page.  
• The battery pack may be weak. Charge the battery for 15-20 hours.  
• The handset may be too far from the base unit.  
• Place the base unit away from appliances or metal objects.  
• Change the digital security code (see page 32).  
• Check the battery pack to ensure there is a secure connection.  
• Make sure ringer volume isn't set to turned "off."  
Severe noise interference.  
• Keep the handset away from microwave ovens, computers, remote control toys, wireless  
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical  
appliances.  
• Move to another location or turn off the source of interference.  
The Caller ID does not display.  
• The call was answered before the second ring.  
• The call was placed through a switchboard.  
• Charge the handset.  
• Your Caller ID service may not be active; contact your local telephone service provider.  
Voice Message Indication does  
not work.  
• Contact your local telephone company to make sure that your telephone receives FSK message  
signaling.  
• Reset the indicator by pressing and holding the find handset key for 5 seconds.  
If you still have a problem.  
• Call our customer hotline at 1-800-297-1023.  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 3 7 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Liquid Damage  
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps.  
Case  
Action  
If the handset or base is exposed to  
moisture or liquid, but it only affects the  
exterior plastic housing.  
Wipe off the liquid, and use as normal.  
If moisture or liquid has entered the  
Handset:  
plastic housing (i.e., liquid can be heard 1.Remove the battery cover and leave it off for ventilation  
in the phone or liquid has entered the  
handset battery compartment or vent  
openings on the base).  
2.Remove the battery pack by disconnecting  
3.Leave the battery cover off and the battery pack disconnected for at least 3 days  
4.Once the handset is completely dry, reconnect the battery pack and the battery cover.  
5.Recharge the handset’s battery pack for 20 hours before using again.  
Base:  
1.Disconnect the AC adapter from the base unit, cutting off electrical power.  
2.Disconnect the telephone cord from the base unit.  
3.Let dry for at least 3 days.  
IMPORTANT: You must unplug the telephone line while recharging the battery pack to  
avoid charge interruption.  
CAUTION:  
DO NOT use a microwave oven to speed up the drying process. This will cause permanent  
damage to the handset, base and the microwave oven.  
After following these steps, if your cordless telephone does not work, please send to:  
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Blvd.  
Ft. Worth, TX 76155  
1-800-554-3988, Monday through Friday  
8 a.m. to 5 p.m. CST  
[ 3 8 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
1. Use only the Uniden battery pack specified in the owner’s manual.  
2. Do not dispose of the battery pack in a fire. The cell may explode.  
Check the nickel-cadmium battery disposal package insert for disposal  
instructions.  
3. Do not open or mutilate the battery pack. Released electrolyte is  
corrosive and may cause damage to the eyes or skin. It may be toxic  
if swallowed.  
4. Exercise care in handling the battery in order not to short the battery  
with conducting materials such as rings, bracelets, and keys. The  
battery or conductor may overheat and cause burns.  
5. Charge the battery pack provided with or identified for use with this  
product only in accordance with the instructions and limitations  
specified in the owner’s manual provided for this product.  
6. Observe proper polarity orientation between the battery pack and  
battery charger.  
Important Safety Instructions  
Precautions!  
When using your telephone equipment, these basic safety precautions  
should always be followed to reduce the risk of fire, electrical shock, and  
injury to persons:  
Before you read anything else, please observe the following:  
Warning!  
1. Read and understand all instructions.  
Uniden America Corporation DOES NOT represent this unit to be  
waterproof. To reduce the risk of fire, electrical shock, or damage to the  
unit, DO NOT expose this unit to rain or moisture.  
2. Follow all warnings and instructions marked on the product.  
3. Unplug this product from the wall outlet before cleaning. Use a dry  
cloth for cleaning without liquid or aerosol cleaners.  
4. Do not use this product near water; for example, near a bathtub, wash  
bowl, kitchen sink or laundry tub, in a wet basement, or near a  
swimming pool.  
Rechargeable Nickel-Metal-Hydride Battery Warning  
•This equipment contains a rechargeable nickel-cadmium battery.  
•Cadmium is a chemical known to the State of California to cause cancer.  
•The rechargeable nickel-cadmium battery contained in this equipment  
may explode if disposed of in a fire.  
5. Do not place this product on an unstable cart, stand, or table.  
The telephone may fall, causing serious damage to the unit.  
6. Slots and openings in the cabinet and the back or bottom are  
provided for ventilation. To protect the product from overheating,  
these openings must not be blocked or covered. This product should  
never be placed near or over a radiator or heat register. This product  
should not be placed in a built-in installation unless proper  
ventilation is provided.  
Do not short-circuit the battery.  
•Do not charge the rechargeable nickel-cadmium battery used in this  
equipment in any charger other than the one designed to charge this  
battery as specified in the owner’s manual.  
SAVE THESE INSTRUCTIONS!  
Important Electrical Considerations  
Using another charger may damage the battery or cause the battery to  
explode.  
Unplug all electrical appliances when you know an electrical storm is  
approaching. Lightning can pass through your household wiring and  
damage any device connected to it. This phone is no exception.  
7. This product should be operated only from the type of power source  
indicated on the marking label. If you are not sure of the type of power  
supply to your home, consult your dealer or local power company.  
8. Do not allow anything to rest on the power cord. Do not locate this  
product where the cord will be damaged by persons walking on it.  
9. Do not overload wall outlets and extension cords, as this can result in  
the risk of fire or electrical shock.  
10.Never push objects of any kind into this product through cabinet  
slots, as they may touch dangerous voltage points or short out parts  
that could result in a risk of fire or electric shock. Never spill liquid of  
any kind on the product.  
11.To reduce the risk of electric shock, do not disassemble this product.  
Take it to qualified service personnel when service or repair work is  
required. Opening or removing covers may expose you to dangerous  
voltages or other risks. Incorrect reassembly can cause electric shock  
when the appliance is subsequently used.  
Rechargeable Nickel-Cadmium  
Batteries Must Be Recycled or  
Disposed of Properly  
The FCC Wants You To Know  
Changes or modifications to this product not expressly approved by  
Uniden, or operation of this product in any way other than as detailed by  
the owner’s manual, could void your authority to operate this product.  
Your telephone compiles with Part 68 of FCC Rules. You must, upon  
request, provide the FCC registration number and the REN to your  
telephone company. Both numbers are on the base unit.  
Uniden voluntarily participates in an RBRC® industry program to collect  
and recycle nickel-cadmium batteries at the end of their useful life,  
when taken out of service within the United States.  
The RBRC® program provides a convenient alternative to placing used  
nickel-cadmium batteries into the trash or municipal waste stream,  
which is illegal in some areas.  
•Through the RBRC® program, Uniden makes it easy for you to drop off  
the used battery at local retailers of replacement nickel-cadmium  
batteries. You may also contact your local recycling center for  
information on where to return the used battery. Please call 1-800-8-  
BATTERY for information on Ni-Cd battery recycling in your area.  
Uniden's involvement in this program is part of its commitment to  
protecting our environment and conserving natural resources.  
RBRC® is a registered trademark of the Rechargeable Battery Recycling  
Corporation.  
Note:  
You must not connect your phone to:  
• coin-operated systems  
• most electronic key telephone systems  
This device complies with Part 15 of the FCC rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) This device must accept any interference received,  
including interference that may cause undesired operation. Privacy of  
communications may not be ensured when using this phone.  
12.Unplug this product from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
A. When the power supply cord is damaged or frayed.  
B. If liquid has been spilled into the product.  
C. If the product has been exposed to rain or water.  
Range  
D. If the product does not operate normally when following the  
operating instructions. (Adjust only those controls that are  
covered by the operating instructions. Improper adjustment of  
other controls may result in damage and will often require  
extensive repair work by a qualified technician.)  
Your new phone is designed to achieve the maximum possible range by  
transmitting and receiving according to the highest specifications set  
forth by the FCC. We have rated this phone to operate at a maximum  
distance with the qualification that the range depends upon the  
environment in which the telephone is used. Many factors limit range,  
and it would be impossible to include all the variables in our rating. The  
Maximum Range rating of this phone is meant to be used as a means of  
comparison against other range claims.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
E. If the product has been dropped or the cabinet has been damaged.  
F. If the product exhibits a distinct change in performance.  
13.Do not use the telephone to report a gas leak in the vicinity of the  
leak.  
Uniden works to reduce lead content in our PVC coated cords in our  
product and accessories.  
WARNING: The cords on this products and/or accessories contain lead, a  
chemical known to the State of California to cause birth defects or other  
reproductive harm. Wash hands after handling.  
Additional Battery Safety Precautions  
Caution! To reduce the risk of fire or injury to persons by the battery,  
read and follow these instructions:  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 3 9 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Telephone Line Problems  
Installation Considerations  
One Year Limited Warranty  
The FCC has granted the telephone company the right to disconnect  
service in the event that your phone causes problems on the telephone  
line. Also, the telephone company may make changes in facilities and  
services which may affect the operation of your unit. However, your  
telephone company must give adequate notice in writing prior to such  
actions to allow you time for making necessary arrangements to continue  
uninterrupted service.  
Important: Evidence of original purchase is required for warranty service.  
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)  
Selecting a Location  
Before choosing a location for your new phone, there are some important  
guidelines you should consider:  
• The location should be close to both a phone jack and continuous  
power outlet. (A continuous power outlet is an AC outlet which does  
not have a switch to interrupt its power.)  
• Keep the base and handset away from sources of electrical noise such  
as motors or fluorescent lighting.  
• The base can be placed on a desk or tabletop or mounted on a standard  
telephone wall plate.  
• You should charge your new phone for 15-20 hours before completing  
the installation or using the handset.  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original  
retail owner, this Uniden Product to be free from defects in materials and  
craftsmanship with only the limitations or exclusions set out below.  
WARRANTY DURATION: This warranty to the original user shall terminate  
and be of no further effect 12 months after the date of original retail  
sale. The warranty is invalid if the Product is (A)  
damaged or not maintained as reasonable or necessary, (B) modified,  
altered, or used as part of any conversion kits, subassemblies, or any  
configurations not sold by Uniden, (C) improperly installed,  
(D) serviced or repaired by someone other than an authorized Uniden  
service center for a defect or malfunction covered by this warranty, (E)  
used in any conjunction with equipment or parts or as part of any system  
not manufactured by Uniden, or (F) installed or programmed by anyone  
other than as detailed by the owner’s manual for this product.  
If you are having trouble with your telephone service, you must first  
disconnect your phone to determine if it is the cause of your problem. If  
you determine that it is the cause, you must leave it disconnected until  
the trouble has been corrected.  
Radio Interference  
Radio interference may occasionally cause buzzing and humming in your  
cordless handset, or clicking noises in the base. This interference is  
caused by external sources such as TV, refrigerator, vacuum cleaner,  
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE.  
If these noises continue and are too distracting, please check around  
your home to see what appliances may be causing the problem.  
In addition, we recommend that the base not be plugged into a circuit  
that also powers a major appliance because of the potential for  
interference. Be certain that antenna on the unit is fully extended.  
In the unlikely event that you consistently hear other voices or  
distracting transmissions on your phone, you may be receiving radio  
signals from another cordless telephone or other source of interference.  
If you cannot eliminate this type of interference, you need to change to  
a different channel.  
Telephone Line Outlets  
There are two types of phone outlets:  
Modular Jack  
STATEMENT OF REMEDY: In the event that the product does not conform  
to this warranty at any time while this warranty is in effect, warrantor  
will either, at its option, repair or replace the defective unit and return it  
to you without charge for parts, service, or any other cost (except  
shipping and handling) incurred by warrantor or its representatives in  
connection with the performance of this warranty. Warrantor, at its  
option, may replace the unit with a new or refurbished unit. THE LIMITED  
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY  
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL  
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,  
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT  
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR  
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or  
limitation of incidental or consequential damages so the above limitation  
or exclusion may not apply to you.  
Most phone equipment available now uses modular jacks. Phone cords are  
fitted with a molded plastic connector which plugs into this type of jack.  
If you do not have modular phone jacks, contact your local telephone  
company for information about their installation.  
Hardwired Jack  
Some equipment is wired directly to a phone jack, and these types of  
installations require a modular jack converter. This type of installation is  
not difficult; however, you should contact your Uniden telephone dealer  
or a telephone supply store for advice about the proper adapter or  
converter for your particular situation.  
Finally, it should be noted that some cordless telephones operate at  
frequencies that may cause interference to nearby TVs and VCRs.  
To minimize or prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a TV or VCR.  
If interference is experienced, moving the cordless telephone farther  
away from the TV or VCR will often reduce or eliminate the interference.  
Connecting the Telephone Cords  
Consider these safety guidelines before connecting the telephone cords:  
Caution!  
• Never install telephone wiring during a lightning storm.  
• Never touch uninsulated telephone wires or terminals unless the  
telephone line has been disconnected.  
More than One Cordless Telephone  
If you want to use more than one cordless telephone in your home, they  
must operate on different channels. Press the delete/channel key to  
select a channel that provides the clearest communication.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and you  
may also have other rights which vary from state to state. This warranty  
is void outside the United States of America and Canada.  
• Use caution when installing or modifying telephone lines.  
Applying Power to the Base  
Cordless Telephone Privacy  
This phone requires an AC outlet, without a switch to interrupt power,  
and the included AC adapter. To relieve strain on the DC plug when the  
phone is placed on a desk or table, wrap the power cord around the strain  
relief notch on the back of the base.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after  
following the instructions in the owner’s manual you are certain that the  
Product is defective, pack the Product carefully (preferably in its original  
packaging). The Product should include all parts and accessories  
originally packaged with the Product. Include evidence of original  
purchase and a note describing the defect that has caused you to return  
it. The Product should be shipped freight prepaid, by traceable means, to  
warrantor at:  
Cordless telephones are radio devices. Communications between the  
handset and base of your cordless telephone are accomplished by means  
of radio waves which are broadcast over the open airways. Because of the  
inherent physical properties of radio waves, your communications can be  
received by radio receiving devices other than your own cordless  
telephone unit. Consequently, any communications using your cordless  
telephone may not be private.  
NOTE:  
Place the power cord so that it does not create a trip hazard, or  
where it could become chafed and create a fire or other  
electrical hazards.  
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Blvd. Fort Worth, TX 76155  
(800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday  
or visit our website at www.uniden.com  
[ 4 0 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
     
I.C. Notice  
TERMINAL EQUIPMENT  
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is  
confirmed by the registration number. The abbreviation, IC, before the registration number signifies that  
registration was performed based on a Declaration of Conformity indicating that Industry Canada technical  
specifications were met. It does not imply that Industry Canada approved the equipment.  
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The  
REN assigned to each terminal equipment provides an indication of the maximum number of terminals  
allowed to be connected to a telephone interface. The termination on an interface may consist of any  
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of  
all the devices does not exceed five.  
RADIO EQUIPMENT  
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were  
met.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device  
must accept any interference, including interference that may cause undesired  
operation of the device. “Privacy of communications may not be ensured when using this telephone.  
w w w . u n i d e n . c o m  
ADDITIONAL INFORMATION [ 4 1 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
E, F, G, H, I, J, K, L  
Traveling out-of-range . . . . . . . 19  
Troubleshooting . . . . . . . . . . . 36  
Index  
Earpiece volume . . . . . . . . . . . .18  
Find handset . . . . . . . . . . . . . .20  
General information . . . . . . . . .35  
I.C. Notice . . . . . . . . . . . . . . .41  
Installing the phone . . . . . . . . . .7  
Interference . . . . . . . . . . . . . .40  
Liquid damage . . . . . . . . . . . . .38  
A
V, W, X, Y, Z  
AC adapter information . . . . . . . 35  
Voice mail waiting indicator . . . 21  
Wall mounting . . . . . . . . . . . . . 10  
Warranty . . . . . . . . . . . . . . . . 40  
B
Basic setup . . . . . . . . . . . . . . 13  
Battery pack  
Information . . . . . . . . . . . . . 35  
Installing . . . . . . . . . . . . . . . 8  
Preparing and charging . . . . . . 8  
Replacement and handling . . . 33  
Beltclip installation . . . . . . . . . 11  
M, N, O, P, Q  
Making a call . . . . . . . . . . . . . .17  
Package contents . . . . . . . . . . . .1  
Precautions . . . . . . . . . . . . . . .39  
Quick reference guide . . . . . . . . .1  
C
Call waiting . . . . . . . . . . . . . . 20  
Caller ID service . . . . . . . . . . . 28  
Call waiting . . . . . . . . . . . . . 20  
Deleting . . . . . . . . . . . . . . . 30  
Making a call . . . . . . . . . . . . 31  
Viewing . . . . . . . . . . . . . . . 29  
Channel . . . . . . . . . . . . . . . . . 19  
Charging the battery pack . . . . . . 9  
Cleaning contacts . . . . . . . . . . 34  
Connect the base unit . . . . . . . . 9  
Controls and functions . . . . . . 5, 6  
R
Receiving a call . . . . . . . . . . . .17  
Redial . . . . . . . . . . . . . . . . . .18  
Ringer tone . . . . . . . . . . . . . . .16  
RocketDial . . . . . . . . . . . . . . . .22  
S
Speed dial memory  
Making calls from speed dial  
memory . . . . . . . . . . . . . .27  
Storing names and numbers in  
speed dial memory . . . . . . .23  
D
Dial mode . . . . . . . . . . . . . . . 15  
Digital security code . . . . . . . . 32  
T, U  
Technical information . . . . . . . .35  
Tone dialing switch-over . . . . . .19  
[ 4 2 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
Memory List  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
MEMORY LOCATION MEMO  
Name Phone Number  
Memory  
Location  
Memory  
Location  
Name Phone Number  
1*  
2
6
7
3
8
4
9
5
10  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
MEMORY LOCATION MEMO  
Name Phone Number  
Memory  
Location  
Memory  
Location  
1*  
2
6
7
3
8
4
9
5
10  
w w w . u n i d e n . c o m  
[ 4 3 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Memo  
w w w . u n i d e n . c o m  
[ 4 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
At Uniden, we'll take care of you!  
If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023  
or visit our web site at www.uniden.com  
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.  
Our Uniden representatives will be happy to help you with any matters regarding  
the operation of this unit, available accessories, or any other related matters.  
Thank you for purchasing a Uniden product.  
Hours: M-F 8:00 AM to 5:00 PM CST.  
Accessibility  
?
For information on the accessibility features of this product, please call  
1-800-874-9314 (V/TTY)  
May be covered under one or more of the following U.S. patents:  
4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905  
5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790  
5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312  
5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152  
5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227  
5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082  
6,125,277 6,253,088 6,314,278 6,418,209  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Computer Drive HD 15TM User Manual
Therma Stor Products Group Dehumidifier Ultra Aire 100V User Manual
Toshiba Flat Panel Television 23HL85 User Manual
Toto Indoor Furnishings TMT1HNCR User Manual
USRobotics Network Card 33600 User Manual
ViewSonic Car Video System VS15006 User Manual
ViewSonic Digital Photo Frame DPG801BK User Manual
Viper Automobile Alarm 671XV User Manual
Viper Vacuum Cleaner VR ACF User Manual
VTech Games ABC Food Fun User Manual