Cordless Telephone
EXAI 7980
Owner's Manual
Thank you for your purchase of the Uniden EXAI 7980 cordless
telephone. Please read this Owner's Manual carefully before
using your cordless telephone to ensure proper use. After read-
ing the manual, please keep it in a safe place and refer to it
when necessary.
©1999 Uniden America Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Getting Started
Getting Started
Read this first.................................................................................................. 4
Step 1: Checking the package contents ......................................................... 5
Step 2: Setting up the base unit ..................................................................... 6
Step 3: Preparing the battery pack.................................................................. 9
Step 4: Setting Caller ID options................................................................... 11
Entering your area code.................................................................... 12
Basics
Basics
Making calls................................................................................................... 13
On-hook dialing......................................................................................... 13
Off-hook dialing .........................................................................................14
Redialing................................................................................................... 15
Receiving calls............................................................................................... 16
Receiving a call from the handset.............................................................16
Receiving a call from the base ..................................................................18
Telephone
Features
Telephone Features
Storing phone numbers and names ............................................................... 19
Making calls with memory dialing .................................................................. 21
Editing a stored name and/or phone number................................................. 23
Erasing a stored name and/or phone number ................................................ 25
Caller ID Features
Caller ID service.............................................................................................. 26
When the telephone rings........................................................................ 27
Viewing the Caller ID message list................................................................. 28
Deleting information from the Caller ID list ............................................. 29
Using the Caller ID list.................................................................................... 31
Calling a party from the Caller ID list........................................................ 31
Storing Caller ID messages in Memory dialing........................................ 32
Using “Caller ID with call waiting” service .................................................... 33
Caller ID
Features
Using the
Answering
Machine
Using the answering machine
Setting the clock............................................................................................. 34
Recording the greeting ....................................................................................35
Changing the greeting......................................................................................35
Turning the answering machine on and off .....................................................36
Setting the number of rings.............................................................................37
Setting the tool saver switch...........................................................................37
Setting maximum recording time for incoming messages..............................37
Playing recorded messages.............................................................................38
Deleting recorded messages...........................................................................39
Screening incoming calls .................................................................................39
Leaving a voice memo.....................................................................................40
Recording a phone conversation (2-way REC).................................................41
Selecting a PIN code........................................................................................42
Remote access ................................................................................................43
Remote room monitor .....................................................................................44
Additional
Information
Additional Information
3-way conversation......................................................................................... 45
Changing the digital security code.................................................................. 46
Mounting the base unit on a wall................................................................... 47
Installing the beltclip ........................................................................................49
Headset installation..........................................................................................49
Note on power sources ...................................................................................50
Maintenance ................................................................................................... 50
Troubleshooting............................................................................................... 51
Specifications.................................................................................................. 53
Index............................................................................................................... 54
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
This cordless telephone must be set up before use. Follow these steps;
Step 1
Step 2
(page 5)
Unpack the telephone and accessories.
(page 6 to 8)
Next, choose the best location to set up the
base unit.
Base unit
Step 3
(page 9 to10)
Then, insert the battery pack into the handset.
You have to charge the battery pack for more
than 12-15 hours before using the phone.
Handset
Step 4
(page 11 to 12)
Finally, set Caller ID options and store your area
code in the memory to use the Caller ID service.
Note: Skip the setting of area code if your
calling area requires 10 digits dialing.
Handset
About the digital security code
This cordless telephone uses a digital security code to prevent unauthorized access
to your base unit. This security code prevents other cordless handsets from making
calls through your base unit.
A random security code will be assigned automatically between your base unit and
handset when you charge the battery pack for the first time.
To reset the security code, see page 46.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1
Checking the package contents
Make sure you have received the following items in the package.
If any of these items are missing or damaged, contact the Uniden Parts Department
(see below).
• Base unit
• Handset
• AC adapter (AD-420)
• Wall mount adapter
• Beltclip
• Rechargeable battery
pack (BT-905)
• Telephone line cord
• This Owner's Manual
• Precautions and Important Safety Instructions
• Registration Card
Uniden Parts Department
(800) 554-3988
Hours are 8:30 a.m. to 5:00 p.m. Central Time, Monday through Friday.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2
Setting up the base unit
Do the following steps.
• Choose the best location
• Connect the base unit
• Choose the dialing mode
Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERA-
TIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS
brochure. Here are some important guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid noise sources such as a window by a
street with heavy traffic
Avoid microwave oven
Avoid television sets
and other electronic
equipment
Avoid excessive
moisture, extremely low
temperatures, dust,
mechanical vibration, or
shock
Avoid personal
computers
Choose a central location
Avoid other cordless telephone
• You should charge your handset for 15-20 hours before using the phone.
• The location should be close to both a phone jack and continuous a power outlet
which is not switchable.
• Keep the base and handset away from sources of electrical noise such as motors and
fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna fully vertical.
• The base can be placed on a desk, tabletop or mounted on a standard wall plate.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Step 2
Connect the base unit
If you want to install the base unit on the wall, see page 45.
Route the cord.
2
To AC outlet
To DC IN 9V
AC adapter
(supplied)
1
To telephone outlet
To TEL LINE
Telephone line cord
(supplied)
1
Connect the telephone line cord to the
TEL LINE jack and to a telephone
outlet.
Note Until the handset battery is
fully charged, you can only
answer incoming calls at the
base unit.
2
3
Connect the AC adapter to the
DC IN 9V jack and to a standard
120VAC wall outlet.
3
Set the base unit on a desk or tabletop
and place the handset on the base
unit.
Then raise the antenna to a vertical
position.
Note
Place the power cord so it does not create a trip hazard, or where it could become
chafed and create a fire or electrical hazard.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Step 2
Notes
• Use only the supplied AD-420 AC adapter.
Do not use any other AC adapter.
Polarity of the plug
• Place the base unit close to the AC outlet so
that you can unplug the AC adapter easily.
Tips
• If your telephone outlet isn't modular, contact
your telephone company for assistance.
Modular
Choose the dialing mode
PULSE
TONE
Depending on your dialing system, set the TONE/PULSE switch as follows:
If your dialing system is Set the switch to
Tone
TONE
Pulse
PULSE
If you aren't sure of your dialing system
Make a trial call with the TONE/PULSE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3
Preparing the battery pack
Charge the battery pack for more than 12-15 hours before connecting the phone line.
1
2
Press and slide the battery compart-
ment cover toward the bottom of the
unit.
Connect the battery pack connector
with the correct polarity (black and red
wires), then insert the battery pack
into the battery compartment.
Black
Red
3
4
Securely close the battery compart-
ment cover by sliding it up until it
snaps into place.
Place the handset on the base unit
with the keys and display facing
upward.
This position lets you see Caller ID
messages on the display.
Total:00
When the handset has been properly
placed on the charging terminals of
the base unit, the “status” LED of the
base unit lights and charging begins.
Charge the battery for 12-15 hours.
You can place either side up for charg-
ing the battery.
status LED
9
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Step 3
Battery use time (per charge)
From fully charged
• Seven hours coutinuous use.
• Seven days when the handset is in the standby mode.
When the battery charge becomes low
When the voltage of battery pack is very low and
needs to be charged, the phone eliminates functions
to save power. If the phone is not in use,
Low Battery
“Low Battery” flashes and none of the keys
will operate. If the phone is in use, "Low Battery" flashes and the handset
beeps. Complete your conversation as quickly as possible and return the handset to
the base unit for charging.
Notes
• Even when the battery pack is not being used, it will gradually discharge over a long
period. For optimum performance, be sure to return the handset to the base unit after
a telephone call for charging the battery.
• The built-in memory backup can hold numbers and names stored in the memory for
up to 2 minutes, while you replace the battery pack.
• Rechargeable batteries have a memory effect that reduces standby and talk time. To
avoid this memory effect, on a monthly basis, use the phone until the
“Low Battery”
indication appears. Then charge the battery for 12-15 hours.
Cleaning the battery contacts
To maintain a good charge, it is important to clean all battery contacts on the handset
and base unit about once a month. Use a pencil eraser or other contact cleaner.
Do not use any liquids or solvents.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4
Setting Caller ID options
There are three Caller ID options, Auto Talk, CIDCW (Caller ID with Call Waiting), and
Area Code.
1
In the standby mode, hold down
call id for 2 seconds until the Caller
ID setting appears.
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:
2
Press • up or dn ª to move the
cursor to the item that is to be set.
Example: To select CIDCW
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:
3
4
For Auto Talk and CIDCW press
select
to toggle between on and off.
For the Area Code setting please see
page 12.
To complete the settings, press
call id
, then the handset returns to
standby mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Step 4
Entering your area code
Note
Skip this step if your calling area requires 10 digits dialing.
When you use this phone for the first time, or move to an area that has a different area
code, you must enter your area code. This is necessary because the phone must
distinguish local or long distance calls to properly dial calls from the Caller ID message
list. (See page 31.)
1
When the phone is in the standby
call id
mode, press and hold
for 2
seconds until the Caller ID setting
screen appears.
1 Auto Talk:Off
:On
2 CIDCW
3 Area Code:
2
Press • up or dn ª to select
“Area Code”.
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:
select
3
4
Press
.
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:
Use the dial buttons (
enter the 3-digit area code.
to
9
) to
0
select
5
6
Press
.
A beep sounds and the displayed area code is entered.
call id
Press
to complete the setting. Or return the handset to the base unit to
complete the setting mode and set the handset to the standby mode.
Note
When the area code has already been stored in
memory, the stored area code will be displayed. To
change it, use the dial buttons to enter the new area
code.
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:817
call id
To complete the setting, press
or return the handset to the base unit.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Making calls
On-hook dialing
1
Dial the phone number.
(Phone numbers can be up to 32
digits.)
Example: Enter 817-858-3300
8178583300
talk
. “Talk” flashes on the
2
3
4
Press
display.
Talk
8178583300
The number is dialed. After about 5
seconds, the call-time display appears.
Talk 0:00
8178583300
• up
/tone/0
*
dn ª
redial/p
talk
Press
or place the handset on
the base to end the telephone call.
The call-time will be displayed for
about 5 seconds.
chan
5:15
Other Operations
To
Do this
Press
chan
To improve reception
.
• up
dn ª
To adjust the ear speaker volume
Press
or
.
To temporarily switch to tone dial (base
must be set to pulse mode)
Press /tone/0 . The following numbers
dialed will be sent as tone dialing.
redial/p
To enter a pause within the numbers dialed
Press
.
Notes
• If there is no key entry for more than 20 seconds, on-hook dialing is cancelled and the
telephone returns to the standby mode.
talk
• The phone number can be edited before pressing
.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Making calls
Off-hook dialing
1
2
Pick up the handset.
talk
Press
. “Talk” appears
flashing on the display.
Talk
3
4
Dial the phone number.
After about 5 deconds, the call-time
display appears.
Example: Enter 817-858-3300
Talk 0:17
8178583300
talk
Press
or place the handset in
the base to end the telephone call.
The call-time will be displayed for
about 5 seconds. The phone returns
to standby.
10:03
• Returning the handset to the base
also ends the phone call and set
the handset returns to the standby
mode (i.e., Auto Standby).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Making calls
Redialing
The redial key redials the last number dialed. The redialed number can be up to 32 digits
long.
[On-hook redialing]
1
Press redial/p .
The phone number that was last
dialed appears on the display.
talk
. “Talk” appears
flashing on the display.
2
4
Press
Then the phone number is dialed.
After about 5 seconds, the call-time
display appears.
talk
or place the handset on
5
Press
the base to end the telephone call.
The call-time will be displayed for
about 5 seconds.
Note
If the recently dialed number exceeds 32
digits, only the first 32 digits are retained
for redialing.
[Off-hook redialing]
talk
1
Press
.
Talk
“Talk” appears flashing on the display.
redial/p
2
3
Press
.
talk
Press
or place the handset on the base to end the telephone call. The call-
time will be displayed for about 5 seconds.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving calls
Receiving a call from the handset
1
Phone rings.
Calling
talk
2
Press
, the call-time display
starts. Talk with the caller.
Talk 0:00
flash
talk
or place the handset on
the base when the telephone call is
finished.
3
Press
The call time will be displayed for
about 5 seconds.
115:35
Auto Talk when ringing
When the Auto Talk setting is on and there is an incoming call, simply lift the handset
from the base unit to answer the phone. (See page 11.)
Any key when ringing
When the Auto Talk setting is on, press any handset key to answer the phone.
(See page 11.)
Any key when paging
To cancel paging, press any key on the handset keys while the handset is beeping.
Call Waiting Caller ID reception — Note: You must subscribe to Call Waiting Caller
ID service from your local phone
company to use this feature.
When a call is received during a telephone call already in progress, the handset enters
call waiting mode and Caller ID data displays
.
flash
Press
to switch to the new call. (See page 33.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Receiving calls
Handset ringer tone
• up
dn ª
In the standby mode, press
or
.
Ring Type A
High
• up
dn ª
Each time
or
is pressed, the ringer
tone setting changes and the selected ringer tone
sounds for 2 seconds.
dn ª
• up
Ring Type A
Low
dn ª
• up
Ring Type B
High
dn ª
• up
Ring Type B
Low
dn ª
• up
Handset ear speaker volume
• up
dn ª
during a telephone call will change the ear speaker volume
Pressing
or
of the handset. This setting will remain in effect after the telephone call has ended.
dn ª
dn ª
dn ª
<Loud>
<High>
<Middle>
<Normal>
ª up
ª up
ª up
When you press
sound beeps.
in Loud mode or press
in Normal mode, an error
dn ª
• up
17
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Receiving calls
Receiving a call from the base
1
The base rings. The status LED on the
base flashes.
speaker
and speak.
2
3
Press
When you finish the call, press
speaker
to hang up.
RINGER
OFF–ON
Base ringer switch
To turn off the ringer, set the ringer switch
to off position. This switch turns the handset
ringer on or off.
Base speaker volume
To control the speaker volume of the base,
volume ª
adjust the volume • and
button
as desired.
volume
•
ª
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory storing
You can store up to 10 phone numbers in the dial memory.
Storing phone numbers and names
mem
1
Press and hold
for 2 seconds
until “Memory Store” is
displayed.
Memory Store
1
2
dn ª
• up
2
Press
or
to scroll to the
memory number where you would
like to store the number.
Memory Store
7
8
Or press the keypad (
0
to
9
) to
#/ 1
delete
select the memory location where you
would like to store the number.
/tone/0
*
redial/p
select
select
3
Press
.
When an empty memory location is selected,
“Store Name” is displayed. The cursor
flashes indicating that the display is ready for
the name to be entered.
Store Name
Edit Memory 1
Delete Memory 1
Go Back
If this screen appears, the memory location is
full. You must edit the location. (See page 23.)
Note
Whenever you are using a menu screen, you must press a key within 20 seconds or the
phone will return to standby. If you return the handset in the cradle the phone will return
to standby too.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Memory storing
/tone/0
, or delete keys to enter the name.
The name cannot exceed 16 characters.
4
Use the • up , dn ª
,
#/ 1 ,
• up
#/ 1
delete
dn ª
• Use the
• Use the
• Use the
and
and
key to scroll through the characters.
/tone/0 to move the cursor to the desired position.
key to delete characters as needed.
select
5
6
Press
.
“Store Number” is displayed. The cursor
flashes indicating that the display is ready for the
number to be entered.
Store Number
/tone/0
Use the keypad,
,
#/ 1 , or
redial/p
keys to enter the phone number.
The phone number can be up to 16 digits.
Store Number
817858330
redial/p
• Use the
key to enter pause in the
dialing sequence. The display shows a “P”.
Note The pause feature is useful for long distance calling, credit card dialing, or
sequences that reguire a pause between digits.
delete
• Use the
key to delete digits needed.
select
7
Press
.
The handset beeps and displays the confirmation screen. Memory storage is
complete.
For example if you store a name and number into
memory location number 7, the display shows
Memory 7 Stored
“Memory 7 Stored”.
After about 2 seconds, “Memory Store”
is displayed.
Memory Store
7 <Memory 7>
8
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory dialing
Making calls with memory dialing
[On-hook dialing]
mem
1
Press
.
The handset displays your
programmed memory locations.
1 UNIDEN CORP
2 JOHN DOE
3 MOM AND DAD
2
Press the
and
keys to
• up
dn ª
select the memory location you would
like to dial.
talk
dn ª
For example if the
key is pressed
once, the cursor move down to the next
memory location number.
2 JOHN DOE
3 MOM AND DAD
4
Or press the number keypad to select
the memory location you would like to dial.
For example if you pressed 5 on the key-
pad, the display shows memory location
number 5 with the cursor in that line.
5 JOHN SMITH
6 <Memory 6>
7
talk
, “Talk” momentarily flashes on the
display and the volume setting is appeard, then the 0123456789012
3
Press
Talk
displayed number is dialed.
Notes
• To cancel memory selection, press mem during memory dialing. The handset
returns to standby.
• Whenever you are using a menu screen, you must press a key within 20 seconds
or the phone will return to standby.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Memory dialing
Display a Programmed Number
mem
#/ 1
/tone/0
keys to toggle between the
Press
, then use the
and
names and the numbers display.
Program name
Program number
Program name
1 UNIDEN CORP
2 JOHN DOE
3 MOM AND DAD
1
1 8178583300
2 5452930
1 3 8175551212
1
1 UNIDEN CORP
2 JOHN DOE
1 3 MOM AND DAD
Note When the stored phone number has 15 or more digits, the first 14 digits of
the phone number are displayed.
[Off-hook dialing]
talk
1
Press
.
"Talk" flashes on the display.
Talk
mem
2
3
Press
.
Talk 0:00
Press the number keypad to select
the memory location of the desired
phone number. The selected phone
number is displayed.
Then the number is dialed.
Talk 0:35
0123456789012
Note
Memory location 0 follows memory
location 9.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory editing
Editing a stored name and/or phone number
mem
for 2 seconds.
The display shows the memory
screen and any saved name/number.
1
2
3
Press and hold
Memory Store
1 UNIDEN CORP
2 JOHN DOE
Press the
or
keys or
dn ª
• up
number keypad to select the memory
location you would like to edit.
Memory Store
1 UNIDEN CORP
2 JOHN DOE
#/ 1
select
Press
.
delete
/tone/0
The following screen appears with the
memory location number that you
have selected in the display.
*
redial/p
For example, if you selected memory
location number 1, the display shows
memory 1 selected.
Edit Memory 1
Delete Memory 1
Go Back
• up
dn ª
key to select
Store Name
UNIDEN CORP
4
Press the
or
select
"Edit Memory", then press
The following screen appears. The cursor
.
flashes indicating that the display is ready for the name to be edited.
When a name has not been stored, the cursor appears at the beginning of the
second line.
5
6
Press
,
,
,
, or
to edit the name. (See
• up
dn ª
#/ 1
delete
/tone/0
page 19.) To edit only the phone number, skip this step.
Press
.
select
Store Number
817858330
The following screen appears. The cursor
flashes indicating that the display is ready for
the number to be edited.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Memory editing
/tone/0
#/ 1
delete
7
8
Use the number keypad,
,
,
redial/p , or
key to edit
the phone number. The phone number cannot exceed 16 digits. (See page 20.)
When the phone number will not be edited, skip this step.
select
Press
.
The handset beeps and displays the confirma-
tion screen. The memory storage is complete.
Memory 1 Stored
For example if you store a name and number into
memory location number 1, the display shows
“Memory 1 stored”.
Memory Store
1 UNIDEN CORP
2 JOHN DOE
After about 2 seconds, “Memory Store” is
displayed.
mem
9
Press
to exit edit mode.
Display a Programmed Number
Use the
display.
and
/tone/0 keys to toggle between the names and the numbers
#/ 1
Program name
Program number
Program name
Memory Store
1 UNIDEN CORP
2 JOHN DOE
1
Memory Store
1 8178583300
1
Memory Store
1 UNIDEN CORP
1 2 JOHN DOE
1 2 5452930
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory erasing
Erasing a stored name and/or phone number
mem
for 2 seconds.
The display shows the memory
screen and any saved name/number.
1
2
3
Press and hold
Memory Store
1 UNIDEN CORP
2 JOHN DOE
• up
dn ª
Press the
or
keys or
number keypad to select the memory
location you would like to edit.
Memory Store
1 UNIDEN CORP
2 JOHN DOE
select
Press
.
delete
The following screen appears with the
memory location number that you
have selected in the display.
For example if you selected memory loca-
tion number the display shows memory 2
as the location in the selected.
Edit Memory 2
Delete Memory 2
Go Back
dn ª
4
5
Press
to move the cursor
Edit Memory 2
Delete Memory 2
Go Back
down to “Delete Memory” command
line.
Delete Memory 2?
Yes
No
select
Press
. The following confirmation
screen appears.
• up
6
7
Press
Press
to move the cursor to “Yes”.
select
delete
or
.
There is a confirmation tone and memory is deleted. The following screen appears.
For example if memory location number 2 is
selected for deletion, the following display
appears as the confirmation screen.
Memory 2 Deleted
25
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Memory erasing
8
After 2 seconds the display returns to
the “Memory Store” screen.
You may select another number to
delete (return to step 4).
Memory Store
1 UNIDEN CORP
2 MOM AND DAD
9
Press
to return to standby.
mem
Caller ID
Caller ID service
You must subscribe to the Caller ID service from your telephone company to use
this feature.
When the telephone rings, the Caller ID feature allows you to view the caller's name
and phone number on the display before you answer the phone.
The handset displays the phone number of the incoming call, the name, time, and call
counts. Additionally, you can dial the displayed number, and store the information for
memory dialing.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Caller ID
When the telephone rings
1
When phone rings, the status LED blinks.
On the second ring, the display shows the caller’s phone number, along with the
date and time. The incoming call information is stored.
If the Caller ID service includes the caller’s name, it appears on the display (up to
15 letters).
The date and time received
and call count
Caller's name
Caller's phone number
5/11 12:30PM 01
UNIDEN CORP
813-858-3300
Here are some typical displays;
When the phone number and name data
are received
When a private number is received
5/11 12:30PM 01
UNIDEN CORP
817-858-3300
5/11 12:30PM 01
UNIDEN CORP
Private Number
When a private name is received
When an unknown number is received
5/11 12:30PM 01
Private Name
817-858-3300
5/11 12:30PM 01
UNIDEN CORP
Unknown Number
When an unknown name is received
When invalid data is received
5/11 12:30PM 01
Unknown Name
817-858-3300
Incomplete Data
2
When the telephone is answered, the display changes to “Talk”.
Notes
• If you answer a call before the Caller ID message is received (Example: before the
second ring), the Caller ID message will not appear.
• When the call is received via a telephone company that does not offer Caller ID
service, the caller's phone number and name do not appear.
(This includes international calls.)
• When the call is via a private branch exchange (PBX), the caller's phone number and
name may not appear.
• Data errors appear as “ ”.
2
5/11 12:30PM 01
UNI EN CORP
813-8 -3300
27
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Caller ID
Viewing the Caller ID Message list
The Caller ID list stores information for up to 30 incoming calls - even unanswered calls.
Note If a call comes in via a telephone system that does not offer Caller ID service,
no information is stored.
call id
. The summary screen
appears.
1
Press
When there are new messages you
have received, “New” and the number
of calls are displayed. The summary
screen shows how many new calls
are stored, along with the total of
new and old calls stored in the list.
New :01
Total:02
dn ª
2
Press
to display the latest
caller ID message.
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
• up
dn ª
3
4
Press
to see the next
message. Or press
previous message.
to see
• up
Press call id to return to standby.
Long Distance call settings and cancellation
1
Pressing
while the incoming call information is
5/17 12:30PM 03
UNIDEN CORP
1-817-858-3300
displayed (in step 2) will set or cancel a long
distance call. The prefix “1-” will be displayed at
the beginning of the phone number when a long
distance call is set.
Pressing
1
will cancel the long distance call setting.
Notes
• “End” appears when you have reviewed all messages in the Caller ID list.
• Each message can be up to 16 characters for the phone number and the name.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Caller ID
Deleting information from the Caller ID list
The EXAI 7980 stores up to 30 Caller ID messages. If more new calls are received,
messages stored in the list are deleted beginning with the oldest message in the list.
Data can also be deleted manually.
[Deleting a Caller ID message]
call id
1
2
Press
Press
.
• up
dn ª
or
to select the
message that you would like to
delete. (See page 28.)
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
delete
, while the summary
screen is displayed.
3
Press
Delete Message ?
Yes
No
• up
dn ª
to select
4
5
Press
or
“Yes” or "No".
select
delete
Press
or
.
When the pointer is at “Yes”:
A beep tone sounds and the next
Caller ID message displayed.
When the pointer is at “No”:
The display returns to the Caller ID
display.
Notes
“
”
• While using the Delete Message ? screen, if no key is pressed for more
than 20 seconds, an error tone sounds and the telephone returns to standby.
• If you get an incoming call, the deleting operation cancelled and the telephone
returns to standby so you can answer the call.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Caller ID
[Deleting all Caller ID name/numbers]
call id
1
Press
.
New :01
Total:02
delete
2
Press
, while the summary
screen is displayed.
Delete All ?
Yes
No
dn ª
to select
• up
3
4
Press
or
“Yes” or “No”.
select
delete
Press
or
.
When the pointer is at “Yes”:
A beep tone sounds and all stored
Caller ID messages are deleted.
Total:00
When the pointer is at “No”:
The display returns to the summary
screen.
New :01
Total:02
Notes
“
”
• While using the Delete All ? screen, if no key is pressed for more than 20
seconds, an error tone sounds and the telephone returns to standby.
• If you get an incoming call, the deleting operation is cancelled and the telephone
returns to standby so you can answer the call.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Caller ID
Using the Caller ID list
Calling a party from the Caller ID list
You can place a call from the Caller ID list.
The EXAI 7980 stores up to 30 messages.
call id
1
2
Press
.
• up
dn ª
to select the
Press
or
phone number that you want to dial.
(See page 38.)
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
select
3
4
Press
.
UNIDEN CORP
8178583300
talk
Press
.
Talk
8178583300
The displayed phone number dials
automatically.
Long Distance calls
Pressing
1
while the incoming call information is displayed (in step 1) will place a
“1” in front of the number for long distance calling. Press
“1”.
again to remove the
1
Notes
“ ”
• When a long distance call has been set, 1 appears in the display.
• You cannot make a call from the Caller ID list, if your EXAI 7980 is connected to
private branch exchange (PBX).
• When the cursor is displayed at the end of the phone number (as in step 2), if you
cannot edit the phone number. (See page 28.) Caller ID messages can not be changed
from the Caller ID list. You must first store messages in memory. (See page 32.)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Caller ID
Storing Caller ID messages in Memory
Messages shown in the Caller ID list can be stored for memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number of the party
on the Caller ID list can be stored in memory dialing.
1
2
Press
.
call id
Display the phone number to be
stored from the Caller ID list. (See
page 28.)
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
3
4
Press
.
mem
Select Location
1 UNIDEN CORP
2 JONE DOE
• up
dn ª
Press
or
to select the
memory location where you wish to
store the name and number from
caller ID.
9
Press the dial buttons (
to
)
0
and select the number (01 to 20).
select
5
Press
.
A beep tone will sound. The number
is stored in memory, and the display
returns to the Caller ID list.
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
Notes
• If a message has already been stored in the select-
ed memory numbers location, a verification screen
is displayed.
Replace Memory ?
Yes
No
• up
Press
Press
to select “Yes”.
select
to overwrite. The display returns to the Caller ID list.
• You can not store a Caller ID message if no phone number appears in the message.
• If no key is pressed for more than 20 seconds, an error tone sounds and the
telephone returns to the standby mode.
• If there is an incoming call or page, memory storage is cancelled and the telephone
is set to the incoming call or page. If you get an incoming call, memory storage is
cancelled.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Caller ID
Using “Caller ID with call waiting” service
“Caller ID” and “Call waiting” are separate services. CIDCW (Caller ID on Call
Waiting) performs the same as regular Caller ID on a call waiting number. You
must subscribe to the "Caller ID with call waiting (CIDCW)" service from your
telephone company before you can use the following features.
The “Call waiting” service can also be used independently. Please contact your
telephone company for details.
When a new incoming call arrives during your current telephone call, the phone
number appears. (The name of the new caller is displayed, depending upon the
telephone service.)
1
When a new incoming call arrives
during your current telephone call, the
phone number and the name of the
caller is displayed.
Talk 10:30
UNIDEN CORP
817-858-3300
flash
2
3
Press
.
You will be able to talk with the person
that has just called. The person with
whom you were talking will be put on
hold.
To return to the first caller, press
flash
again.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the answering machine
Setting the clock
The answering machine’s clock starts when the AC adapter cord is plugged in.
clock
until you hear the long
1
2
Press
beep.
First set the day by pressing
repeat
or
.
skip
When the number appears on the LED
clock
display, press
.
The unit announces the day currently
selected.
skip
3
4
5
Next set the hour by pressing
repeat
or skip . When the correct
numbers appear in the LED display,
press
.
clock
Then set the Minute by pressing
repeat
skip
or
numbers appear in the LED display,
press
. When the correct
.
clock
Lastly, set AM/PM by pressing
repeat
skip
or
. The LED display
will show A (AM) and P (PM) in turn.
clock
At the correct one, press
You will hear a long beep.
.
Then you will hear the new day and time.
clock
Notes • You can hear the current time set by pressing
.
• If a call comes in during clock setting, start over after the call.
• In case of power interruption, the clock stops. You must reprogram the
time once power is restored.
• If you begin to set the clock, and you pause for more than two minutes,
the unit returns to standby.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Recording the greeting
You can record a personalized greeting or use the prerecorded message.
greeting
on the
1
2
Press and hold
base until you hear the long beep.
Then, begin speaking over the micro-
phone.
When you finish speaking, press
greeting or play/stop .
The greeting you just recorded will auto-
matically be played back.
The base microphone is located under the
phone. Position yourself approximately 10
inches away from the base and speaker
clearly.
10"
Changing the greeting
You can change from the pre-recorded greeting to your own recorded greeting or vice
versa.
greeting
on the base unit.
You will hear the currently selected
greeting.
1
Press
greeting
playing the greeting.
2
3
Press
while the unit is
Wait until the entire greeting is
played back, or press play/stop .
Now, the greeting is changed.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Turning the answering machine on and off
answer
to change the status
from on to off. The LED display
indicates the change.
1
Press
2
When the unit is turned on, it
initializes by playing the greeting.
If you want to stop playing, press
.
play/stop
Setting the number of rings
Choose one of three settings by sliding the RING TIME switch on the base unit to
one of the following positions:
Check the LED display to see if the
answering machine is on or off. If the LED
display is on, the unit is on and ready to
take messages. If the LED display is off, it
will not take messages.
2 : 2 times
4 : 4 times
RING TIME
2/4/TS
36
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Setting the toll saver switch
The ring time/tool saver switch sets your answering system to answer after two or
four rings.
In the TS (toll saver) position, if you have
new messages, the answering system
answers after two rings. If there are no
new messages, the system answers after
four rings. This way, when you call long
distance to check your messages, and
have no messages, you can hang up after
the second ring to save a charge.
RING TIME
2/4/TS
Setting maximum recording time for
incoming messages
You can select the maximum recording time by sliding the REC TIME switch on the
base unit to one of the following positions:
1 : 1 minute
4 : 4 minutes
ANN : Announce only
Note
If you set the switch to ANN,
a prerecorded greeting plays, and no
message will be accepted.
REC TIME
ANN/4/1
37
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Playing recorded messages
You can listen to message at the base unit.
1
2
The number on the display blinks to
indicate that there are new messages
received.
volume ª volume •
delete
play/stop
Press
to hear the
messages. They will be played in the
order they were received.
skip
repeat
play/stop
To stop playback, press
any time.
repeat
To repeat the message, press
. To repeat the previous message, press
repeat
within 2 seconds after the current message has started. If you press after 2
seconds, the current message is repeated from the beginning.
repeat
To go backward and repeat a message you choose, press and hold
until
your desired message number appears on the display.
skip
To skip to the next message, press
.
skip
To go forward, press and hold
until your desired message number appears on
the display.
volume ª
volume •
To adjust the speaker volume, press
/
.
The volume level is displayed by a figure from 1 to 10.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Deleting recorded messages
delete
To delete individual messages, press
during playback, immediately after,
or before the next message begins. You will hear a confirmation tone when the
deletion is completed.
To delete all messages, first, make sure all new messages are played. Then press
delete
and hold
at the base until you hear a long beep.
Notes
If there are messages that you have not listened to when you are deleting all
messages, you will hear several short beeps and the messages will not be deleted.
This is to protect you from accidentally erasing messages you have not yet listened to.
To maintain maximum available record time, it is a good idea to delete the old
messages.
•
•
Screening incoming calls
You can screen calls using the base unit.
1
2
After the answering machine starts, the base speaker lets you hear the caller as the
machine records the message.
To answer the call immediately, follow the directions below. The answering
machine will disconnect automatically.
AT THE HANDSET
Auto Talk on:
When the handset is on the base unit: Simply pick up the handset
talk
When the handset is away from the base unit: Press
Auto Talk off:
When the handset is on the base: Pick up the handset and press talk
AT THE BASE
speaker
Press
Note
If the message portion was 2 seconds or less, it will not be retained as a message.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Leaving a voice memo
You can record a memo by using the base unit, as a reminder to yourself or as a
message for someone else in the household. A memo is stored and played back like
any other incoming message, and the LED display will light to indicate that a message
has been received.
voice memo
approximately 1 second.
1
2
Press and hold
for
After a long beep, turn to the micro-
phone and begin speaking. Be sure
to keep within 10 inches off the
microphone while recording.
3
When you have finished the memo,
press
again, or press
voice memo
play/stop
.
Microphone
Note
If a call comes in during the memo recording, the unit will stop recording automatically
and the ringer will sound. You will need to start over after the call. The memo must be
at least 2 seconds long.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Recording a phone conversation (2-way REC)
You can record a telephone conversation that is already in progress.
The conversation is stored and played back like an incoming message.
1
2
During the conversation, press and
voice memo
hold
on the base unit
approximately 1 second. Recording
starts automatically.
To stop recording, return the handset
voice memo
to the base and press
or play/stop on the base unit.
Notes
• The recorded conversation must be at least 10 seconds long, or it will be
automatically deleted.
• The telephone beeps intermittently to alert the parties that the conversation is being
recorded.
• You cannot use 2-way REC when you using the speakerphone.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Selecting a PIN code
To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code (00-99). To select a PIN, perform the follow-
ing steps:
pin
1
2
On the base, press and hold
.
A beep sounds, and the LED displays
‚‚.
repeat
skip
To set the first number, press
repeat
or
to scroll from ‚ to ·.
When the desired number appears in
pin
the display, press
.
3
To set the second number, press
skip
repeat
or
to scroll from ‚ to
·. When the desired number appears
pin
in the display, press
.
Note
If you don’t select a PIN code within two
minutes, the system returns to standby.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Remote access
You can operate your answering system from a remote location using any touch-phone
telephone. Use this function to check for recorded messages, to play or delete
messages, even to record a new outgoing message, and to monitor sounds in the
room.
1
2
Call your telephone number.
During the greeting playback, press # followed by your PIN code. Refer to page 42
for instructions on how to select a PIN code.
3
4
The answering system announces the time and day stamp followed by the number
of messages stored in memory. Message playback automatically begins.
You may continue to listen to your messages, or you may select a command from
the following chart:
Function
Press
Repeat a Message
Playing your Messages
Skipping a Message
Deleting a Message
Stop Message Playback
Answering System On
Memo Record/Stop
Greeting Record/Stop
Answering System Off
Remote Room Monitor
# then 1
# then 2
# then 3
# then 4
# then 5
# then 6
# then 7
# then 8
# then 9
# then
*
5
6
After all of your messages have played, you will hear intermittent beeps indicating
that the system is in the command waiting mode. You may enter another command
at this time from the chart above.
When you are finished, hang up to exit the system. The answering system auto-
matically returns to standby.
Notes
• You must enter a command within 15 seconds of entering command waiting mode
or the answering system automatically hangs up and returns to standby.
• The system will only play back messages for four minutes and then it returns to
command waiting mode. To continue playing your messages, press then 2 again
#
43
within 15 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Using the answering machine
Remote room monitor
You can call your answering system from any touch-tone phone and monitor sounds
in the room where your base unit is installed.
1
2
3
4
Call your telephone number.
During the outgoing message playback, press # followed by your PIN code.
The answering system begins announcing the time and day stamp.
Press # then
while the system announces the time and day stamp.
*
You hear sounds in the room where your phone is installed. After 15 seconds, the
answering system returns to the command waiting mode.
5
Press # then
to monitor the room for another 15 seconds. Or select another
remote function. Or hang up to exit the system. The answering system automati-
cally returns to standby.
*
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
3-way conversation
The Uniden EXAI 7980 permits 3-way conversations
between the handset, base, and outside line.
When speaking on the handset
speaker
on the base to join
the 3-way conversation.
1
2
Press
speaker
Press
on the base to hang
up. The handset will still be connected
to the outside call.
When speaking on the base
talk
1
2
Press
on the handset to join
the 3-way conversation.
talk
Press
up.
on the handset to hang
Note
Pressing speaker on the base while
dialing with the handset sets the 3-way
conversation mode dialing is not
affected.
•
45
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
Changing the digital security code
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See
page 4.)
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
1
Place the handset on the base unit.
page
Press
.
The handset beeps.
2
3
Remove the handset from the base
unit.
Place the handset on the base unit.
Leave the handset on the base for at
least 3 seconds. A new random
security code is set.
Note
If the handset battery pack is completely discharged or the battery pack removed, the
digital security code will be lost. If this happens, a new security code is set automatically
the next time the battery pack is charged.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
Mounting the base unit on a wall
[Standard wall plate mounting]
This phone can be mounted on any standard telephone wall plate.
1
Snap the wall mount adapter into the
notches on the base.
1
2
Plug the telephone line cord to the
TEL LINE jack and the AC adapter to
the DC IN 9V jack.
2, 3, 4,
5, 6, 7
3
4
Plug the telephone line cord into the
telephone outlet.
Wrap the AC adapter cord inside the
molded wiring channel. Then wrap
the cord around the strain relief notch.
Wall plate
5
Plug the AC adapter into a standard
120VAC wall outlet.
Note Use only the Uniden AC
adapter supplied with this
phone.
6
7
Raise the antenna to a vertical
position.
AC adapter
Align the mounting slots on the base.
with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.
AC outlet
47
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
8
On the base unit, pull the handset
retainer out of the slot. Rotate it clock-
wise 180 degrees.
Handset retainer
9
Flip the retainer from front to back.
Slide it back into the slot so that the lip
of the retainer is up and the oval is
down. The retainer holds the handset
in place,
[Direct wall plate mounting]
If you don't have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location.
That could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 10 - 15 feet of a working phone jack to avoid
excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the base and
handset.
TOP
1
2
Insert two mounting screws into the
wall, (with their appropriate anchoring
device), 3-15/16 inches apart. Allow
about 3/16 of an inch between the
wall and screwheads for mounting the
phone.
3/16 in.
3-15/16 in.
Refer to steps 1 through 8 on page 47
to mount the telephone.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
Installing the beltclip
To attach the beltclip
To remove the beltclip
Insert the beltclip into the holes on each
side of the handset. Press down until it
clicks.
Pull both sides of the beltclip to release
the tabs from the holes.
Headset installation
Your phone may be used with an optional
headset. To use this feature, simply plug
any standard 2.5mm headset plug into
the headset jack. Your phone is ready for
hands-free conversation.
headset
jack
49
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
Note on power sources
RECYCLING NICKEL-CADMIUM
BATTERIES
Battery replacement and
handling
When the operating time becomes short,
even after a battery is recharged, please
replace the battery.
With normal usage, your battery should
last about one year.
NICKEL-CADMIUM
BATTERIES MUST BE
DISPOSED OF
PROPERLY.
Please contact your place of purchase for
a replacement battery.
Ni-Cd
Nickel-cadmium cells are used in the bat-
tery pack. Please take your used nickel-
cadmium battery packs to a store that
recycles nickel-cadmium batteries.
Power Failure
During the period that the power is
off, you will not be able to make or
receive calls with the telephone.
Caution
• Use the specified battery pack.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Maintenance
When slightly dirty
Wipe with a soft, dry cloth.
Caution
Do not use paint thinner, benzene,
alcohol, or other chemical products.
Doing so may discolor the surface of
the telephone and damage the finish.
When very dirty
Wipe with a soft cloth that has been
dampened with diluted, neutral deter-
gent. Dry with a dry cloth.
When the charging terminals
become dirty
Wipe with a pencil eraser or other contact
cleaner.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The status light won't come on
when the handset is placed in
the base unit.
• Make sure the AC adapter is plugged into the
base unit and wall outlet.
• Make sure the handset is properly seated in
the base unit.
• Make sure the charging contacts on the hand-
set and base unit are clean.
The audio sounds weak and/or
scratchy.
• Make sure that the base unit antenna is in a
vertical position.
• Move the handset and or base unit to a
different location away from metal objects or
appliances and try again.
• Press chan to help eliminate background
noise.
• Make sure that you are not too far from the
base.
Can't make or receive calls
• Check both ends of the base unit telephone
line cord.
• Make sure the AC adapter is plugged into the
base unit and wall outlet.
• Disconnect the AC adapter for a few minutes,
then reconnect it.
• Reset the digital security code (See page 43).
talk
• Make sure
is pressed.
The handset doesn't ring or
receive a page.
• The battery pack may be weak. Charge the
battery on the base unit for 15-20 hours.
• The handset may be too far away from the
base unit.
• Place the base unit away from appliances or
metal objects.
• Reset the digital security code (See page 43).
The Caller ID disappears.
• The handset was picked up before the second
ring.
• The call was placed through a switch board.
The Caller ID does not display.
• Call your local telephone company to verify
your Caller ID service is current.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
Symptom
Suggestion
The answering system does not • Make sure the base unit is plugged in.
work. • Make sure the answering system is turned on.
reset
• Press
after an AC line spike.
The answering syatem does not • Select REC TIME switch to either the one
answer calls.
minute or four minute option.
• The memory may be full. Delete some or all of
the saved messages.
Messages are incomplete.
• The incoming messages may be too long.
Remind callers to leave a brief message.
• The memory may be full. Delete some or all of
the saved messages.
After a power failure, the
greeting is deleted.
• Record your personal greeting again.
The prerecorded messages should remain.
No sound on the base unit
speaker during call monitoring or
message playback.
• Adjust the speaker volume on the base unit.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
Specifications
General
The EXAI 7980 complies with FCC Parts 15 and 68.
Frequency control:
PLL
Frequency shift keying: FSK
Operating temperature: 0°C to +50°C (+32°F to +122°F)
Base unit
RX frequency:
TX frequency:
Power requirements:
Size:
902.102 MHz to 904.103 MHz (40 channel)
925.997 MHz to 927.948 MHz (40 channel)
9V 350mA (from AC adapter)
7-23/64 in. (W) x 8-55/64 in. (D) x 2-1/4 in. (H)
(187 mm (W) x 225 mm (D) x 57 mm (H))
Approx. 21.2 oz. (Approx. 600 g)
Weight:
Handset
RX frequency:
TX frequency:
Power requirements:
925.997 MHz to 927.948 MHz (40 channel)
902.102 MHz to 904.103 MHz (40 channel)
Rechargeable Nickel-Cadmium battery pack
Size (without antenna): 3-11/32 in. (W) x 2-23/64 in. (D) x 9-9/16 in. (H)
(85 mm (W) x 60 mm (D) x 243 mm (H))
Weight:
Battery:
Approx. 9.8 oz. (277.4 g) (including battery)
BT-905
Capacity
Talk mode
Standby mode
600 mAH, 3.6V
7 hours TYP
7 days TYP
Specifications, features, and availability of optional
accessories are all subject to change without prior notice.
At Uniden, we’ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding the
operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 7:00 AM to 7:00 PM CST.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Additional information
Index
0 - 9
D
3-way conversation..............................45
Dialing mode..........................................8
Digital security code.........................4,46
A
Answering machine
E, F, G, H
Changing the greeting ...................35
Deleting recorded messages.........39
Leaving voice memo......................40
Playing a recorded messages........38
Recording a phone conversation ...41
Recording the greeting ..................35
Remote access ..............................43
Remote room monitor ...................44
Screening incoming calls ...............39
Selecting a PIN code......................42
Setting the clock............................34
Setting the number of rings...........36
Setting the maximum recording
time for the incoming message.....37
Setting the tool saver switch.........37
Turning the answering machine
on and off.......................................36
Area code ............................................12
Editing a stored name and/or
phone number .....................................23
Erasing a stored name and/or
phone number .....................................25
Handset ear speaker volume...............17
Headset installation .............................49
I, J, K, L
Installing the beltclip............................49
M, N
Maintenance........................................50
Making calls
Off-hook dialing..............................14
On-hook dialing ..............................13
Redialing ........................................15
Making calls with memory dialing.......21
Mounting the base unit to a wall ........47
O, P, Q
B
Package contents ..................................5
Base ringer switch...............................18
Base speaker volume..........................18
Battery pack
R
Receiving calls
Receiving a call from the base.......18
Receiving a call from the handset .16
Handset ringer tone.............................18
Preparing and charging ....................9
Replacement and handling ............50
C
S
Caller ID service
Setting Caller ID options......................11
Setup
Base unit..........................................6
Handset............................................9
Specifications ......................................53
Storing phone numbers and names....18
Calling from the Caller ID list.........31
Deleting the Caller ID list...............29
Storing the data of the
Caller ID list to Memory.................32
Viewing Caller ID message list......28
Caller ID with Call Waiting ..................33
Channel button ....................................13
Connection ............................................7
T
Troubleshooting ...................................51
U, V, W, X, Y, Z
Using “Caller ID with Call Waiting”
service .................................................33
54
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Uniden America Corporation
4700 Amon Carter Boulevard
Fort Worth, TX 76155
Covered under one or more of the following U.S. patents:
4,511,761
4,797,916
4,523,058
5,426,690
4,595,795
Printed in Hong Kong
UCZZ01211ZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|