Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of the Uniden dual handset cordless telephone. This
cordless phone is designed and engineered to exacting standards for reliability, long life,
and outstanding performance.
Welcome
Features
Note: Illustrations in this manual are used for explanation purposes. Some
illustrations in this manual may differ from the actual unit. The color
of your cordless telephone may vary.
• 5.8GHz Extended Range Technology
• Dual Handset System
• Last Number Redial
• Voice Mail Waiting Indicator
• Tone/Pulse Dialing
(Extra Handset & Charger Included)
• Call Transfer from Handset to Handset
• Caller ID/Caller ID on Call Waiting
• 3-Line Backlit LCD
• Page/Find Handset Key
• Earpiece/Ringer Volume Controls
• Mute or Turn Ringer Off
• Hearing Aid Compatible
• 20 Channel Auto Scan
• Desk or Wall Mountable
• Trilingual Menu Displays
• 30 Caller ID Memory
• 10 Number Memory Dialing
If you have any trouble with your phone, call our Customer Hotline at 1- 800-297-1023,
Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on holidays.)
For more information on Uniden products and accessories, be sure to visit our web site:
®
Uniden is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of
Uniden America Corporation.
www.uniden.com
WELCOME/FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 3 ]
Controls and Functions
1. Handset antenna
2. Beltclip hole
1
3. Jack for optional headset
4. Handset ringer speaker
5. Handset battery compartment
6. Handset earpiece
6
7. LCD display
2
8. M (volume & scroll down) key
9. Call id (Caller ID)/menu key
10.
/tone/
(left cursor) key
7
11. Redial/pause key
12. Select/channel key
13. L (volume & scroll up) key
14. End key
3
4
8
9
13
14
15
15. Talk/flash key
16. #/
(right cursor) key
17. Memory key
5
18. Delete/transfer key
19. Handset microphone
20. Handset charging contacts
10
11
16
17
18
12
19
20
[ 4 ]
CONTROLS AND FUNCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Main Base
21. Main base charging contacts
22. Find hs key
23. Charge/in use and VMWI
(Voice Mail Waiting Indicator) LED
24. Telephone line jack
25. DC IN 9V jack
26. Charging contacts
27. Charge LED
24
25
21
22
23
28. DC IN 9V jack
Extra Charging Cradle (for Second Handset)
28
26
27
www.uniden.com
CONTROLS AND FUNCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 5 ]
Terms Used in this Manual
• Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has
not been pressed and there is no dial tone.
• Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone.
• CID - Caller ID
• CIDCW - Caller ID on Call Waiting
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need
customer service assistance or if you have any questions about how Uniden's products accommodate
persons with disabilities, please call the accessibility voice/TTY line:
1-800-874-9314
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a
under the "Accessibility" link.
[ 6 ]
TERMS USED IN THIS MANUAL / ACCESSIBILITY
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Installing the Phone
Do the following steps:
A. Choose the Best Location
B. Install the Rechargeable Battery Packs into the Handsets
C. Connect the Main Base and Charging Cradle, and Charge the Handsets
D. Mount the Main Base on a Wall
If your home has
specially wired alarm
equipment connected to
the telephone line, be
sure that installing the
system does not disable
your alarm equipment.
A. Choose the Best Location
Before choosing a location for your new phone, here are some important guidelines
you should consider:
Avoid heat sources, such as radiators,
air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
Avoid television sets and other
electronic equipment
Avoid microwave ovens
If you have questions
about what will disable
your alarm equipment,
contact your telephone
company or a qualified
installer.
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration,
or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet
(one which is not connected to a switch).
• The main base and each handset should be kept away from sources of electrical
noise such as motors, microwave ovens, and fluorescent lighting.
• The cradle can be placed on a desk, tabletop, or mounted on a standard wall plate.
For better reception, place the main base as high as possible.
• The main base should be placed in an open area for optimum range and reception.
www.uniden.com
INSTALLING THE PHONE
[ 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Install the Rechargeable Battery Packs into the
Handsets
Both handsets are powered by rechargeable battery packs.
The battery recharges automatically when the handset is
placed in the main base or charging cradle.
Use only the Uniden
(BT-905) rechargeable
battery pack supplied
with your phone.
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2) Plug the battery pack connector (red & black wires) into
the small jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
one-way.) Match the wire colors to the polarity label in the
battery compartment, connect the battery, and listen for
a click to insure connection.
3) Make sure you have a good connection by slightly pulling
on the battery wires. If the connection is secure, the
battery jack will remain in place.
4) Place the battery case cover back in the handset by sliding
it upwards until it clicks into place.
[ 8 ]
INSTALLING THE PHONE
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Connect the Main Base and Charging Cradle, and Charge the Handsets
1) Connect each AC adapter to the DC IN 9V
jack and to each standard 120V AC wall
outlet.
• Use only the supplied
AD-314 AC adapter
for the main base and
AD-310 or AD-1010
for the charging
cradle.
2) Place one handset in the main base and
the other in the charging cradle with the
keypad facing forward.
3) Make sure that the charge/in use LED and
charge LED illuminate. If the LED does not
illuminate, check to see that the AC
Do not use any other
AC adapter.
adapter is plugged in and that the handset makes good
contact with the cradle's charging contacts.
• Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
• Connect the AC adapter to a continuous power supply.
• Place each cradle close to the AC outlet to avoid long extension cords.
electrical hazard.
4) Charge your handsets at least 15-20 hours before
plugging the phone line.
www.uniden.com
INSTALLING THE PHONE
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 9 ]
5) Once the handset battery packs are fully
charged, connect the telephone line cord to
the TEL LINE jack and a telephone outlet.
If your telephone outlet isn't modular,
contact your telephone company for
assistance.
Modular
[ 10 ] INSTALLING THE PHONE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
D. Mount the Main Base on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall
plate.
1) Plug the AC adapter to the DC IN 9V jack.
2) Route the AC adapter cord through the molded
wiring channel as shown.
3) Plug the AC adapter into a standard 120V AC
wall outlet.
4) Plug the telephone line cord into the TEL
LINE jack.
5) Plug the telephone line cord into the
telephone outlet.
6) Align the mounting slots on the main base
with the mounting posts on the wall. Then
push in and down until the phone is firmly
seated.
www.uniden.com
INSTALLING THE PHONE [ 11 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting
screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack
to avoid excessive lengths.
• Make sure the wall material is capable of supporting the weight
of the main base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the main base will
be placed.
1) Insert two mounting screws into the wall (with their appropriate anchoring
device), 3-15/16 inches apart.
Allow about 1/8 of an inch between the wall and screw heads for mounting the
phone.
2) Refer to steps 1 through 6 on page 11 to mount the telephone.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
[ 12 ] INSTALLING THE PHONE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Headset Installation
Your phone may be used with an optional headset. To use this feature,
insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations.
or by calling our Parts Department. See page 35.)
Register Handsets to the Main Base before Using!
Whichever handset you choose to charge in the main base will automatically register
to the main base.
The second handset (charging in the extra charging cradle) MUST also be registered
to the main base before use. Follow the steps below to register the second handset.
• When you charge the
handsets, Caller ID
summary screen and
the name of the
handset, HS1 appears.
If HS2appears, you
are charging the
1) Be sure both handsets are fully charged.
2) Remove the handset from the charging cradle, and place it in the main base. The
charge/in use LED light on the main base will begin to flash, indicating that the
registration is taking place.
handset No. 2.
3) Wait for at least 5 seconds, then remove the handset from the main base.
4) Press the find hs key on the main base. If both handsets beep, registration is
complete. If one handset does not beep, re-register that handset.
5) Once both handsets are registered, it doesn’t matter which handset is placed in
• The charging cradle
can be used to charge
either handset.
the main base or the charging cradle.
www.uniden.com
INSTALLING THE PHONE [ 13 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
When to Re-register Handsets
1) You’ll need to re-register the second handset (follow steps on page 13) each time
the digital security code is changed. Refer to page 32 for details regarding the
Digital Security Code.
2) When there is a power failure for more than one hour:
Make sure to return the
handsets to the cradles
after each phone call.
If power failure occurs (e.g. due to electrical storm or if the unit is unplugged
during a move), both handsets will need to be re-registered. To re-register, follow
the same registration process on page 13.
3) If the second handset’s battery becomes very low, the handset must be recharged
for 15-20 hours and re-registered to the main base unit.
[ 14 ] WHEN T O RE-REGISTER HANDSETS
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Basic Setup
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID
on Call Waiting), Area Code, Dial Mode and Language.
CIDCW and Dial Mode options can only be set by using Handset
1. If you try to set by using Handset 2, you will not see these
options listed on the LCD screen. (Headset 1 shows HS1 in the
display while the phone is charging.) AutoTalk, Area Code and
Language options can be set by using either Handset 1 or Handset 2.
Activating AutoTalk
AutoTalk allows you to answer the phone simply by removing the handset from the
cradle. You do not have to press any keys.
1) When the phone is in standby mode, press and hold the
call id/menu key. The following screen appears.
2) Press the select/channel key to turn AutoTalk on.
3) Press the end key to complete the setting. The handset returns to standby mode.
Activating Caller ID on Call Waiting
Caller ID allows you to see the name and number of the calling party before you
answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the name and
number of a call that comes in when you are on the line.
You must subscribe to Caller ID service through your local
telephone provider to use this feature.
1) When the phone is in standby mode, press and hold the
call id/menu key. The following screen appears.
2) Press the M key to select CIDCW.
www.uniden.com
BASIC SETUP [ 15 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting.
4) Press the end key and return the handset to the main base to complete the
setting. The handset returns to standby mode.
Entering Your Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program your
local area code in your phone. If you get a call from within your area code, you'll
only see the 7-digit phone number. If you get a call from outside your area code,
you'll see all 10 digits.
1) When the phone is in standby mode, press and hold the
call id/menu key. The following screen appears.
2) Press the M key twice to select Area Code.
3) Press the select/channel key. If an area code was already
stored, the phone will display it.
4) Use the number keys (0 - 9) to enter the 3-digit area code.
If you make an error, use the delete/transfer key to back-
space.
5) Press the select/channel key. A confirmation tone sounds.
6) Press the end key to complete the setting. The handset returns to standby mode.
If your phone system
requires pulse dialing
and you need to send
the DTMF tones during a
call, you can temporarily
switch over to tone
dialing. (Refer to "Tone
Dialing Switch-over" on
page 20.)
Choosing the Dialing Mode
Your phone can communicate with the telephone network in two different ways: tone
dialing and pulse dialing. These days, most phone networks use a method called tone
dialing, so your phone comes programmed for tone dialing.
If your phone company uses pulse dialing, you'll need to change your phone's dial
mode. There's an easy way to tell: try making a call. If your call connects, your
phone's setting is fine. If not, follow the steps below:
[ 16 ] BASIC SETUP
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
1) When the phone is in standby mode, press and hold the
call id/menu key. The following screen appears.
2) Press the M key three times to select Dial.
3) Press the select/channel key to set the phone to pulse
dialing.
4) Press the end key and return the handset to the main base to complete the
setting. The handset returns to standby mode.
Setting the Language
You can change the language the menu display uses. Choose from English, French, or
Spanish.
1) When the phone is in standby mode, Press and hold the
call id/menu key. The following screen appears.
2) Press the M key four times to select Language.
3) Press the select/channel key to select Eng, Fr. or Esp.
4) Press the end key to complete the setting.
The handset returns to standby mode.
Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from.
1) With the phone in standby mode, press the L or M key.
2) The phone will sound the different ring tones at different volumes. To turn the
ringer off, select Ringer Off.
3) When the phone sounds the ring tone and volume you wish to use, press the end key.
www.uniden.com
BASIC SETUP [ 17 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone
Making and Receiving Calls
Making a call
1) Remove the handset from the cradle.
2) Press the talk/flash key.
3) Listen for the dial tone.
4) Dial the number.
OR
1) Remove the handset from the cradle.
2) Dial the number.
3) Press the talk/flash key.
Receiving a call
To turn on the AutoTalk
feature, see "Activating
AutoTalk" on page 15.
1) Remove the handset from the cradle. (If AutoTalk is on, the phone will
automatically answer the call when you pick it up.)
2) Press the talk/flash key.
OR
1) If the handset is off the cradle, press the talk/flash,
/tone/ , #/
or any
number key. (AutoTalk is on.)
Hanging up
Press the end key or return the handset to the cradle.
[ 18 ] USING YOUR PHONE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Transferring a Call
Your cordless phone allows you to transfer outside calls from handset to handset,
only one handset at a time can talk with an outside caller. The second handset
cannot go off hook to listen to conversations or make an outgoing call while the
other handset is in use.
To transfer a call
1) During a call, press the delete/transfer key. The call will
automatically be placed on hold and the transfer tone sounds.
2) When the other handset receives the call, the transfer tone stops.
To cancel the transfer and return to the caller, press the delete/transfer or talk/flash
key on the handset.
If you transfer a call
and it is not picked up
after 5 minutes, the call
will be disconnected.
To receive a transfer call (from the second handset)
Pick up the handset from the cradle (when AutoTalk is set to
on), or pick up the handset and press the talk/flash key to
answer the transferred call. Additionally, you can answer the transferred call by
pressing any number key, the
/tone/
or #/
key (when AutoTalk is set to on).
Redialing the Last Dialed Number
1) Remove the handset from the cradle.
2) Press the talk/flash key.
3) Listen for the dial tone.
4) Press the redial/pause key.
OR
1) Remove the handset from the cradle.
2) Press the redial/pause key.
3) Press the talk/flash key.
www.uniden.com
USING YOUR PHONE [ 19 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Earpiece Volume
To change the earpiece volume, press the L or M key during a
call.
You can only mute the
handset ringer if the
handset is off the cradle
when the phone starts
ringing.
Temporarily Mute Ringer
If the handset is off the cradle while an incoming call is
ringing, simply press the end key to mute the incoming ring.
The ringer will sound with the next incoming call.
Tone Dialing Switch-over
If your telephone company requires pulse dialing, you can
switch over to tone dialing after the call connects.
This feature is useful when you need tone dialing to use
automated such as telephone bank tellers, telephone
prescription refills, customer support menus,etc.
If your phone is set to pulse dialing mode, make your call normally. Once your call
connects, press the
/tone/
key. Any digits you enter from then on will be sent
as tone digits. When this particular call ends, the phone automatically returns to
pulse dialing mode.
[ 20 ] USING YOUR PHONE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your main base, noise
increases. If you pass the range limits of the main base, your call will terminate
within one minute.
TM
The UltraClear Plus
true compander circuitry
virtually eliminates
background noise. This
innovative technology,
together with 20
different channels,
provides you with the
best possible reception
during all your
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the
phone´s channel for clear operation. While using your phone, press the
select/channel key. Scanning appears on the display, indicating the phone is
changing to another channel. For more information on interference, refer to "Radio
Interference" on page 41.
conversations.
Find Handset
To locate the handset, press the find hs key on the main base.
The handsets beep for 60 seconds.
To cancel paging, press any key on either handset or the find
hs key on the main base.
Paging is also canceled when the phone receives an incoming
call.
www.uniden.com
USING YOUR PHONE [ 21 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Call Waiting
If you have Call Waiting, you can receive calls while on the line.
1) If a call comes in while you are on the phone, you will
hear a call waiting tone. If you have CIDCW activated,
you will see the name and number of the incoming
caller.
2) Press the talk/flash key to accept the waiting call.
After a short pause, you will hear the new caller.
3) To return to the original caller, press the talk/flash
key again.
You must subscribe to Call Waiting through your local telephone company.
Voice Mail Waiting Indicator
If you subscribe to voice mail service, you can use your cordless telephone to access
your voice mailbox. The charge/in use LED on the main base of your phone flashes
whenever you have messages waiting in your voice mailbox.
You must subscribe to
voice mail service from
your telephone company
in order to use this
feature. The voice mail
company will provide
you with the access
number.
Just dial the access number supplied by your voice mail provider to enter your
mailbox.
You can program your voice mail access number to a speed dial number.
If the voice mail waiting indicator remains on after you have retrieved your
messages, press and hold the find hs key for 5 seconds. This will reset the indicator.
[ 22 ] USING YOUR PHONE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Using the Speed Dial Memory
The speed dial memory allows you to store up to 10 names and numbers in each
handset. You can dial these numbers with just a few key presses.
The speed dial memory is not limited to phone numbers. You can store any number
(up to 20 digits) that you need to enter once your call connects. This is referred to
as Chain Dialing. For example, you can save your bank account number to speed dial
memory. When you call your bank's telephone teller service and are prompted to
enter your account number, simply press the memory key and the speed dial number
where you stored your account number. Then press the select/channel key.
When editing the speed
dial memory, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return the
handset to the cradle,
the phone will return to
standby mode also.
Storing Names and Numbers in Speed Dial Memory
1) With the phone in standby mode, press the memory key.
Select Memory
01
2) Enter 0-9 to select the speed dial number where you would
02 JOHN DOE
like to store this entry. You can also scroll through the list
with the L and M keys. Press the select/channel key twice.
3) Store Name appears and a cursor flashes indicating that the
phone is ready for the name to be entered.
Store Name
If the selected speed dial number is already assigned, the
Edit screen appears. You can select Edit to edit this entry,
select Delete to erase this entry, or select Go Back to
choose another speed dial number.
Edit Memory01
Delete Memory01
Go Back
www.uniden.com
USING THE SPEED DIAL MEMORY [ 23 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
4) Enter a name according to the instructions below, then press the select/channel
key. If no name is required, go to step 5.
• The name can be up to 13 characters.
keys
to move the cursor to the desired location.
• Use the #/
and
/tone/
• Use the delete/transfer key to delete characters as needed.
• Press and hold the delete/transfer key to delete all the characters.
If the next character
uses the same number
key, you must press the
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following
order: upper case letters first, lower case letters next and finally the number
corresponding to the key.
#/
key to move the
cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.
If you make a mistake while entering a name
or
Use the
/tone/
#/
key to move the cursor to the incorrect character.
Press the delete/transfer key to erase the wrong character. Then enter the correct
character. To delete all characters, press and hold the delete/transfer key.
Number of times key is pressed
For example, to enter Movies.
keys
1
2
3
4
5
6
7
8
9
1) Press 6. Then press the #/
key
1
A
D
G
J
M
P
T
W
*
1
to move the cursor to the right.
2) Press 6 six times.
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
-
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
2abc
3def
4
4ghi
5jkl
3) Press 8 six times.
5
4) Press 4 six times.
6mno
6
5) Press 3 five times.
6) Press 7 eight times.
7pqrs
8tuv
r
s
7
9
8
y
z
0
9wxyz
0oper
(blank)
[ 24 ] USING THE SPEED DIAL MEMORY
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
5) Store Number is displayed. The cursor flashes indicating
Store Number
that the phone is ready for the number to be entered.
6) Use the keypad to enter the phone number; each number
can be up to 20 digits.
Store Number
8007303456
If you need the phone to pause during the dialing sequence,
press the redial/pause key to insert a two-second delay
between the numbers. You can enter multiple pauses to
increase the delay. Each pause counts as a digit. The
display shows a P for every pause.
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for
more than 30 seconds, it will beep rapidly, and the phone will return to standby mode.
7) Press the memory key. You will hear a confirmation tone,
Memory01 Stored
and the following screen appears.
Memory storage is complete.
After about 2 seconds, the following screen displays all the
01 Movies
02 JOHN DOE
03 MOM AND DAD
speed dial memory entries.
8) Press the end key to exit memory setup mode. The phone
returns to standby.
www.uniden.com
USING THE SPEED DIAL MEMORY [ 25 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Caller ID Messages in Speed Dial Memory
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in
memory dialing. For instructions on viewing the Caller ID Message list, see page 29.
1) Press the call id/menu key. Select the phone number to be
5/17 12:30PM 03
Jane Smith
214-555-1234
stored from the Caller ID list by pressing the L or M key.
You cannot store a
Caller ID message if no
phone number appears
in the message.
2) Press the memory key.
Select Memory
01
02 JOHN DOE
3) Enter a number (0 - 9) or press the L or M key to select the
memory location to be stored.
4) Press the select/channel key. You hear a confirmation tone,
and the number is stored in memory. The display returns to
the Caller ID list.
5/17 12:30PM
Jane Smith
214-555-1234
If a number has already been stored in the selected memory
number location, a confirmation screen is displayed.
Press the L key to select Yes. Press the select/channel key to
overwrite. The display returns to the Caller ID list.
Replace Memory?
Yes
No
[ 26 ] USING THE SPEED DIAL MEMORY
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Making Calls from Speed Dial Memory
1) Press the memory key. The handset displays your programmed
speed dial number.
Select Memory
01 Movies
02 JOHN DOE
2) Enter the number (0 - 9), or press the L or M key to select
the speed dial number you would like to dial.
3) Press the talk/flash key. Connecting changes to Talk, and
the volume setting and the number selected appear on the
display. Then the displayed number is dialed.
Talk
07303456
To cancel speed dialing
Press the end key to cancel speed dialing. The handset returns to standby mode.
Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone
returns to standby mode.
www.uniden.com
USING THE SPEED DIAL MEMORY [ 27 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID and CIDCW (Caller ID on Call Waiting)
You must subscribe to Caller ID services through your local telephone provider
to use these features. When the telephone rings, the Caller ID feature allows you
to view the caller´s name, phone number, date and time of call. The incoming call
information is stored in the Caller ID record. If the Caller ID service includes the
caller´s name, the caller´s name appears on the display (up to 15 letters).
• If you answer a call
before the Caller ID
message is received
(for example, before
the second ring), the
Caller ID message will
not appear.
The date and
time received
5/11 12:30PM
Jane Smith
214-555-1234
Caller's name
Caller's phone number
You may receive any one of the following messages:
• When the call is
received via a
telephone company
that does not offer
Caller ID service, the
caller´s phone
When invalid data is received
When a private name is received
When a private number is received
Incomplete Data
Private Name
Private Number
When an unknown name is received Unknown Name
When an unknown number is received Unknown Number
number and name
do not appear.
(This includes
international calls.)
Data errors appear as ¨ ¨.
• When the call is
received via a private
branch exchange
(PBX), the caller´s
phone number and
name may not appear.
[ 28 ] CALLER ID AND CIDCW
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Viewing the Caller ID Message List
The Caller ID list stores information for up to 30 incoming calls - even unanswered
calls. You can also view the Caller ID list during a call.
1) Press the call id/menu key.
• In Caller ID operation,
if no key is pressed for
more than 30 seconds,
an error tone sounds
and the handset returns
to standby mode.
The summary screen displays the number of new messages
and total messages.
Caller ID
New :01
Total:02
2) Use the M key to scroll through the messages from the
latest to the earliest, or use the L key to scroll through
the messages from the earliest to the latest.
5/17 12:30PM 03
Jane Smith
214-555-1234
• Each message can be
up to 15 characters
for the name and 15
digits for the phone
number.
3) Press the call id/menu key to return to talk mode, or press
the
end key to return to standby mode.
• The number of calls
from the same Caller
ID appears next to the
received time. Once
you view the new
message, the number
will be cleared and
disappear.
• During a call, don't
press the end key, or
the call will be
disconnected.
www.uniden.com
CALLER ID AND CIDCW [ 29 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Information from the Caller ID List
If the phone receives more Caller ID messages than it can store, the oldest one in
the list is automatically deleted. Caller ID data can also be deleted manually.
Deleting a Caller ID message
• While using the
Delete All?or
Delete Message?
screen, if no key is
pressed for more than
30 seconds, an error
tone sounds, and the
handset returns
1) Press the call id/menu key in standby mode. Find the
5/17 12:30PM 03
Jane Smith
214-555-1234
the
message to be deleted from the Caller ID list by pressing
L or M key.
Delete Message?
Yes
No
2) Press the delete/transfer key.
3) Press the L or M key to select Yes, and then press the
to standby mode.
select/channel key.
• If you get an
incoming call or page,
the deleting operation
is canceled and you
can answer the call or
page.
Deleting all Caller ID names/numbers
1) With the phone in standby mode, press the call id/menu key.
Caller ID
New :01
Total:02
2) Press the delete/transfer key.
3) Press the L or M key to select Yes, and then press the
select/channel key.
Delete All?
Yes
No
You hear a confirmation tone and all stored Caller ID
messages are deleted.
Caller ID
Total:00
[ 30 ] CALLER ID AND CIDCW
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Making a Call from the Caller ID List
You can place a call from the Caller ID list.
1) Press the call id/menu key in standby mode. Select the
phone number that you want to dial by pressing the L or
M key.
5/17 12:30PM 03
Jane Smith
214-555-1234
You cannot make a call
from the Caller ID list if
your cordless telephone
is connected to a
private branch exchange
(PBX).
2) To have the phone dial a 1 before the displayed Caller ID
number, press 1. To have the phone dial the stored area
code before the displayed Caller ID number, press 3.
Talk
2145551234
3) Press the talk/flash key. The displayed phone number dials
automatically.
Caller ID on Call Waiting (CIDCW)
With CIDCW, you will hear a Call Waiting tone while you are on a call, and the Caller
ID data is displayed. To accept the waiting call, press the talk/flash key (see page
22).
www.uniden.com
CALLER ID AND CIDCW [ 31 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being
activated by other equipment, the cordless phone provides AutoSecureTM (which
electronically locks your phone when each handset is in the cradle) and Random
CodeTM digital security which automatically selects one of over 262,000 digital
security codes for each handset and the main base.
If the handset battery pack is completely discharged or the battery pack is removed,
the digital security code will be lost. If this happens, a new security code is set
automatically the next time the battery pack is charged. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code.
1) Remove the handset from the cradle. Press and hold the find hs key on the main
base.
2) While holding the find hs key, place the handset in the main base, and leave the
handset in the main base for more than 3 seconds.
3) Remove the handset from the main base. Then place the second handset in the
main base and wait for more than three seconds. No need to holding the find hs
key this time.
4) Press the talk/flash key on one handset. Once you make sure Talk appears on
the display, press the end key. Then, try with the second handset. If each
handset displays Talk, a new security code is set. Otherwise, return to step 1
and try again.
[ 32 ] CHANGING THE DIGITAL SECURITY CODE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Note on Power Sources
Low battery alert
When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power. If the phone is not in
use, Low Battery appears on the LCD and none of the keys will operate.
If the phone is in use, Low Battery flashes and the handset beeps. Complete
your conversation as quickly as possible and return the handset to the cradle for
charging.
Information stored in the phone's memory will be retained for 30 minutes after the battery pack is removed. This
includes all setup information, last number dialed, speed dial memory, and the CID list.
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For
optimum performance, be sure to return the handset to the cradle after a telephone call.
Battery replacement and handling
When the operating time becomes short even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. A replacement battery may be purchased by
calling 1-800-554-3988 (Mon - Fri 8 am to 5 pm, CST).
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use
the Uniden battery model and Uniden adapter model specifically designated for this product.
Caution
Power Failure
• Use only the specified Uniden battery pack (BT-905).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
During the period that the power is off, you will not be able
to make or receive calls with the telephone.
www.uniden.com
NO TE ON POWER SOURCES [ 33 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Talk and Standby Times
With average use, your handset battery provides approximately 6 hours of talk time and approximately 10
days of standby time. When your handsets are not being used and are left off of their charging cradles,
the battery will gradually discharge. You can achieve optimum battery life and performance by returning
the handset to the charging cradle after each use. If the handset is left off of the charging cradle, the
actual talk time duration will be reduced respective to the amount of time the handset is off of the
charging cradle.
Cleaning the battery charging contacts
To maintain a good charge, clean the charging contacts on
the handset once a month.
Dampen a cloth with plain water. Gently rub the damp
cloth over the charging contacts until all visible dirt is
removed. Dry the contacts thoroughly before returning the
handset to the cradle.
Caution
Do not use paint thinner, benzene, alcohol, or other
chemical products. Doing so may discolor the surface
of the telephone and damage the finish.
[ 34 ] NO TE ON POWER SOURCES
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
General Information
The phone complies with FCC Parts 15 and 68.
Operating temperature: -10°C to 50°C (+14°F to +122°F)
AC Adapter Information
(For the main base)
AD-314
120V AC 60Hz
9V DC 350mA
(For the charging cradle)
AC Adapter part number:
Input Voltage:
Output Voltage:
AD-310 or AD-1010
120V AC 60Hz
9V DC 210mA
Battery Information
Battery part number:
Capacity:
BT-905
600mAh, 3.6V
Frequency
925.181-927.451 MHz
5739.320-5746.130 MHz
• To avoid damage to the phone use only Uniden AD-314, AD-310 or AD-1010 and BT-905 with your phone.
• If the handset is left off the cradle, the actual Talk Mode duration will be reduced respective to the amount of time the handset is
off the cradle.
Recharge your phone on a regular basis by returning the handset to either cradle after each phone call.
When the operating time becomes short, even after the battery is recharged, please replace the battery.
With normal usage, the battery should last about one year.
A replacement Uniden adapter or battery may be purchased by calling 1-800-554-3988 (Mon - Fri 8 am to
5 pm, CST).
Specifications, features, and availability of optional accessories are all subject to change without prior
notice.
www.uniden.com
GENERAL INFORMATION [ 35 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first. If these simple steps
do not solve your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm,
Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.)
Symptom
Suggestion
The charge/in use LED or
charge LED won't illuminate
when the handset is placed in
the cradle.
• Make sure the AC adapter is plugged into the cradle and wall outlet.
• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handsets are clean.
The audio sounds weak and/or • Move the handset and/or main base away from metal objects or appliances and try
scratchy.
again.
• Press the select/channel key in the talk mode to help eliminate background noise.
• Make sure that the handset is not too far from the main base.
Can't make or receive calls.
• Re-register both handsets (see page 13).
• Check both ends of telephone line cord.
• Make sure the AC adapter is plugged into the main base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (see page 32).
• Make sure that the handset is not too far from the main base.
• Check the dialing mode used by your telephone company.
[ 36 ] TROUBLESHOO TING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Symptom
Suggestion
• Re-register both handsets (see page 13).
The handset doesn't ring or
receive a page.
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The handset may be too far away from the main base.
• Place the main base away from appliances or metal objects.
• Change the digital security code (see page 32).
• Check the battery pack to ensure there is a secure connection.
• Make sure ringer volume isn’t set to “off.”
Severe noise interference.
• Keep both handsets away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.
• Move the main base to another location or turn off the source of interference.
The Caller ID does not display.
• The call was answered before the second ring.
• The call was placed through a switchboard.
•
Charge the handset.
• Your Caller ID service may not be active; contact your local telephone service
provider.
Handset No. 1 or No. 2 is not
working.
• Make sure the battery pack is connected to the handset and fully charged.
• Re-register the non-functional handset.
Unavailable message is
displayed on the LCD screen of
the handset.
• Make sure the other handset is not already in use. Both handsets cannot be in talk
mode at the same time.
• Place the handset in the main base for at least 5 seconds to re-register to the
main base.
• Make sure the handset is not too far from the main base when trying to use.
www.uniden.com
TROUBLESHOO TING [ 37 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
• Re-register both handsets (see page 13).
The handset doesn’t
communicate with the main
base or the other handset.
No 3- way conversation.
• Only one handset at a time can talk with an outside caller. To allow the other hand-
set to talk to the caller, transfer the call.
Voice Message Indication does • Contact your local telephone company to make sure that your telephone receives
not work.
FSK message signaling.
• Reset the indicator by pressing and holding the find hs key for 5 seconds.
[ 38 ] TROUBLESHOO TING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the
following steps.
Action
Case
Wipe off the liquid, and use as normal.
If the handset or base is exposed to
moisture or liquid, but it only affects
the exterior plastic housing.
Handset:
If moisture or liquid has entered the
plastic housing (i.e. liquid can be
heard in the phone or liquid has
entered the handset battery
compartment or vent openings on the
base).
1. Remove the battery cover and leave it off for ventilation.
2. Remove the battery pack by disconnecting.
3. Leave the battery cover off and the battery pack disconnected for at least 3 days.
4. Once the phone is completely dry, reconnect the battery pack and the battery cover.
5. Recharge the handset’s battery pack for 20 hours before using again.
Base:
1. Disconnect the AC adapter from the base unit, cutting off electrical power.
2. Disconnect the telephone cord from the base unit.
3. Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery pack to
avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please call our
Customer Service Hotline at 1-800-297-1023.
www.uniden.com
TROUBLESHOO TING [ 39 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Uniden works to reduce lead content in our PVC coated cords in our
product and accessories.
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
Precautions!
Before you read anything else, please observe the following:
Warning!
Warning!
The cords on this products and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage
to the unit, DO NOT expose this unit to rain or moisture.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In
most but not all areas, the sum of RENs should not exceed five (5.0). To
be certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. For
products approved after July 23, 2001, the REN for this product is part
of the product identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal point (e.g., 03
is a REN of 0.3). For earlier products, the REN is separately shown on
the label. If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn’t
practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with
the FCC if you believe it is necessary.
Rechargeable Nickel-Cadmium Battery Warning
Important Safety Instructions
•
•
This equipment contains a rechargeable nickel-cadmium battery.
Cadmium is a chemical known to the State of California to cause
cancer.
The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
Do not short-circuit the battery.
Do not charge the rechargeable nickel-cadmium battery used in this
equipment in any charger other than the one designed to charge
this battery as specified in the owner’s manual. Using another
charger may damage the battery or cause the battery to explode.
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury
to persons, including the following:
•
1. Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
•
•
3. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4. Use only the power cord and batteries indicated in this manual. Do
not dispose of batteries in a fire. They may explode. Check with local
codes for possible battery disposal instructions.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the
equipment. If this happens the telephone company will provide advance
notice in order for you to make necessary modifications to maintain
uninterrupted service.
5. Do not disassemble any component of this product.
Please follow instructions for repairing, if any (e.g. battery replacement
section); otherwise do not substitute or repair any parts of the device
except as specified in this manual.
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or
corporation commission for information. This equipment is hearing aid
compatible.
SAVE THESE INSTRUCTIONS!
•
Uniden voluntarily participates in an RBRC® industry program to
collect and recycle nickel-cadmium batteries at the end of their
useful life, when taken out of service within the United States. The
RBRC® program provides a convenient alternative to placing used
nickel-cadmium batteries into the trash or municipal waste stream,
which is illegal in some areas.
Through the RBRC® program, Uniden makes it easy for you to drop
off the used battery at local retailers of replacement nickel-cadmium
batteries. You may also contact your local recycling center for
information on where to return the used battery. Please call 1-800-
8-BATTERY for information on Ni-Cd battery recycling in your area.
Uniden's involvement in this program is part of its commitment to
protecting our environment and conserving natural resources.
RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions. Do not open or mutilate
the battery, and disconnect the battery before shipping this product.
•
The FCC Wants You To Know
Should you experience trouble with this equipment, please contact
Uniden customer service at 800-297-1023. If the equipment is causing
harm to the telephone network, the telephone company may request
that you disconnect the equipment until the problem is resolved.
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of this equipment is
a label that contains, among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
NOTICE: According to telephone company reports, AC electrical surges,
typically resulting from lightning strikes, are very destructive to
telephone equipment connected to AC power sources. To minimize
damage from these types of surges, a surge arrest or is recommended.
•
An applicable Universal Service Order Codes (USOC) certification for the
jacks used in this equipment is provided (i.e., RJ11C) in the packaging
with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
[ 40 ] PRECAUTIONS & WARRANTY
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner's manual, could void your authority to operate this
product.
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by means
of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other than
your own cordless telephone unit. Consequently, any communications
using your cordless telephone may not be private.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This warranty
is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). Disconnect the battery from the Product and
separately secure the battery in its own separate packaging within the
shipping carton. The Product should include all parts and accessories
originally packaged with the Product.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications, may not be ensured when using this phone.
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty
service.
To insure the safety of users, the FCC has established criteria for the
amount of radio frequency energy various products may produce
depending on their intended usage. This product has been tested and
found to comply with the FCC’s exposure criteria. For body worn
operation, the FCC RF exposure guidelines were also met when used with
the Uniden accessories supplied or designed for this product. Use of
other accessories may not ensure compliance with FCC RF exposure
guidelines and should be avoided.
Include evidence of original purchase and a note describing the defect
that has caused you to return it. The Product should be shipped freight
prepaid, by traceable means, to warrantor at:
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original
retail owner, this Uniden Product to be free from defects in materials
and craftsmanship with only the limitations or exclusions set out below.
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
WARRANTY DURATION: This warranty to the original user shall terminate
and be of no further effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is (A) damaged or not
maintained as reasonable or necessary, (B) modified, altered, or used as
part of any conversion kits, subassemblies, or any configurations not
sold by Uniden, (C) improperly installed, (D) serviced or repaired by
someone other than an authorized Uniden service center for a defect or
malfunction covered by this warranty, (E) used in any conjunction with
equipment or parts or as part of any system not manufactured by
Uniden, or (F) installed or programmed by anyone other than as
detailed by the owner's manual for this product.
(800) 297-1023, 7:00 a.m. to 7:00 p.m. CST, Monday through Friday;
9:00 a.m. through 5:00 p.m. CST, Saturday and Sunday
(phone support is closed on holidays).
Radio Interference
Radio interference may occasionally cause buzzing and humming in your
cordless handset, or clicking noises in the base. This interference is
caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check around your
home to see what appliances may be causing the problem. In addition,
we recommend that the base not be plugged into a circuit that also
powers a major appliance because of the potential for interference. Be
certain that the antenna on the unit is fully extended when needed.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change to
a different channel.
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return
it to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther away
from the TV or VCR will often reduce or eliminate the interference.
www.uniden.com
PRECAUTIONS & WARRANTY [ 41 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC, before the
registration number signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were met. It does not
imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment
itself. The REN assigned to each terminal equipment provides an indication of the maximum
number of terminals allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not exceed five.
RADIO EQUIPMENT
The term "IC:" before the radio certification number only signifies that Industry Canada technical
specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device. "Privacy of communications may not be ensured when using this telephone".
[ 42 ] I. C. NO TICE
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
E, F, G, H, I, J, K, L
T, U
AC adapter information ................35
Earpiece volume..........................20
Find handset..............................21
General information ....................35
Headset installation ....................13
I.C. Notice ................................42
Installing the phone ....................7
Interference ..............................41
Liquid damage............................39
Talk and standby times ................34
Technical information ..................35
Tone dialing switch-over ..............20
Transferring a call ......................19
Traveling out-of-range ................21
Troubleshooting..........................36
B
Basic setup................................15
Battery pack
Information ............................35
Installing ................................8
Preparing and charging ..............8
Replacement and handling ........33
Beltclip installation ....................12
V, W, X, Y, Z
Voice mail waiting indicator..........22
M, N, O, P, Q
Volume control
Making a call ............................18
Handset ............................17, 20
Wall mounting ............................11
Warranty ..................................41
C
Precautions................................40
Call transfer feature ....................19
Caller ID service ........................28
Call waiting ............................22
Deleting ................................30
Making a call ..........................31
Viewing..................................29
Channel ....................................21
Charging the battery pack ..............9
Cleaning contacts ......................34
Connect the cradle........................9
Controls and functions ..............4, 5
R
Receiving a call..........................18
Redial ......................................19
Register handsets to the main
base before using ....................13
Ringer tone ..............................17
S
Second handset ..........................13
Speed dial memory
Making calls from
D
speed dial memory ................27
Storing names and numbers
in speed dial memory ............23
Dialing mode..............................16
Digital security code ..................32
www.uniden.com
INDEX [ 43 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
[ 44 ]
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
www.uniden.com
[ 45 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 46 ] MEMORY LIST
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. If you have any questions or problems,
please do not return this product to the place of purchase.
Having Trouble?
our Customer Hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to
5 p.m. CST. (Phone support is closed on holidays.)
Need a Part?
To order headsets, additional handsets, replacement batteries or other accessories, visit our
Help for our Special Needs Customers
If you need special assistance due to a disability or have questions on the accessibility
features of this product, please call 1-800-874-9314 (voice or TTY)
May be covered under one or more of the following U.S. patents:
4,797,916
5,574,727
5,671,248
5,768,345
5,893,034
5,987,330
6,418,209
6,788,953
6,953,118
5,426,690
5,581,598
5,696,471
5,787,356
5,912,968
6,044,281
6,618,015
6,839,550
7,023,176
5,434,905
5,650,790
5,717,312
5,794,152
5,915,227
6,070,082
6,671,315
6,889,184
5,491,745
5,660,269
5,732,355
5,801,466
5,929,598
6,125,277
6,714,630
6,901,271
5,493,605
5,661,780
5,754,407
5,825,161
5,930,720
6,253,088
6,782,098
6,907,094
5,533,010
5,663,981
5,758,289
5,864,619
5,960,358
6,314,278
6,788,920
6,914,940
Other patents pending.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|