Uniden Camera Accessories UDWC23 User Manual

UDWC23 Accessory Camera User’s Manual  
What’s in the Box  
If any items are  
missing or damaged,  
contact our Customer  
Care Line immediately.  
Never use damaged  
Camera stand  
products!  
AC adapter  
Need Help? Get answers 24/7 at our website: www.uniden.com.  
Portable video camera  
If You...  
Contact Uniden’s... Phone Number  
817-858-2929 or  
800-297-1023  
have a question or problem  
Customer Care Line*  
need a replacement part or accessory Parts Department*  
800-554-3988  
Accessibility Help  
800-874-9314  
(voice or TTY)  
need special help due to a disability  
Line  
* During regular business hours, Central Standard Time. Visit our website for detailed business  
hours.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
to make sure that you and your parent or guardian understand these terms, conditions,  
and safety warnings.  
Allow for proper ventilation when units are in use. Do not cover the camera or receiver  
with any object such as a blanket. Do not place it in a drawer or in any location which  
would muffle the sound or interfere with the normal flow of air.  
SAVE THESE INSTRUCTIONS!  
For best results:  
To avoid damage to your equipment, follow these simple precautions:  
Do not drop, puncture or disassemble any part of the equipment. There are no user-  
serviceable parts inside.  
Do not expose the equipment to high temperatures, and avoid leaving the equipment in  
direct sunlight for more than a few minutes. Heat can damage the case or electrical parts.  
Do not place heavy items on top of the equipment or expose the equipment to heavy  
pressure.  
Remove the power adapter during long periods between usages.  
Clean only with a dry cloth.  
Failure to follow the instructions in this operating manual will void the warranty.  
Uniden assumes no liability for damages to property or injury to persons caused by  
improper handling or failure to comply with these safety instructions.  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
Connecting the Power  
1. Connect one end of  
the AC adapter  
Battery  
to the camera’s  
power connector  
and the other  
end to a standard  
120 volt AC  
status  
Link  
status  
Power  
status  
Antenna  
Lens  
outlet.  
2. Press the POWER  
button on the  
camera; the  
POWER  
LINK  
Power status light  
should turn on.  
If it doesn’t, try  
reconnecting the  
AC adapter, and  
make sure the  
power outlet isn’t  
controlled by a  
wall switch.  
Power  
connector  
LINK  
Stand  
Charging the Batteries  
The batteries in your camera will charge whenever the power is connected. Let  
the batteries charge completely (about 8 hours) before you unplug the camera  
to move it around. (You can still use the camera: just keep it plugged in.)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Learning the Buttons and Lights  
Button  
POWER  
LINk  
What it does  
Turn the camera on. Press and hold to turn it off.  
Enter pairing mode.  
Light  
State  
On  
What it means  
The camera is on.  
The camera is off.  
Power Status  
light  
Off  
Flashing The camera is in pairing mode.  
Link Status  
light  
Orange The camera is connected to the receiver.  
Off  
Green  
Red  
Off  
The camera is in standby.  
The battery is charging.  
Battery  
Status light  
The battery is low; the camera will turn off in 3 minutes.  
The battery is fully charged.  
Using the Camera Mount  
The camera has a built-in stand so you can place it on any flat surface. If you  
want to place your camera on a wall or a ceiling (or even if you just want to  
secure it to a flat surface), you can use the included camera mount. (You might  
want to bring the receiver along when you mount the camera; it’s much easier  
to get the camera into the right position when you have the display handy.)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Mounting  
screw  
Camera  
brace  
1. Hold the base of the mount where you want  
to attach it, and mark the location of the  
screw holes.  
2. Use the included screws and anchors to  
attach the base to the wall or ceiling.  
3. Attach the camera to the mounting screw.  
Tighten it a few turns, then turn it to the  
direction you want.  
Mounting  
post  
Post  
lock  
4. Tighten the camera brace up against the back  
of the camera to secure it into place.  
5. Unlock the mounting post by turning the  
wingnut to the left a few turns.  
Screw  
holes  
ꢀ. Set the mounting post to the correct angle,  
then tighten the wingnut until the post is  
locked into place.  
Attach the camera  
1
Tighten the brace against  
the camera to  
secure it  
to the mounting  
screw and turn it  
to the desired  
direction.  
2
in place.  
3
Loosen the  
wingnut to  
unlock the  
mounting  
post.  
Adjust the post to  
the correct angle,  
then tighten the  
wingnut to lock the  
post into place.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pairing the Camera  
Before you can use the camera, you’ll need to “introduce” or pair it to the  
receiver so they can communicate. You might also perform the pairing  
procedure if you are having trouble with the camera.  
1. Make sure the camera is powered on.  
2. On the receiver, select the channel you want to pair this camera to, and put  
the receiver into pairing mode. (This process is slightly different on each  
receiver. See the manual that came with your receiver for instructions.)  
3. On the camera, press LINk to put the camera into pairing mode.  
4. Switch the receiver to this camera’s channel, and verify that the camera’s  
video signal appears on the correct channel. (You might have to enable the  
new channel first.)  
For more information about pairing a camera to your receiver, see the manual  
that came with your receiver.  
If...  
Try...  
- making sure the camera is turned on  
- making sure the camera is paired to the  
correct channel  
the receiver’s signal status  
icon shows no bars or the  
display says No Signal  
- re-pairing the camera and receiver  
the signal status icon shows  
one or two bars or the video  
quality is poor  
see the manual that came with your  
receiver for tips on improving video quality  
there is a lot of static on the see the manual that came with your  
receiver receiver for tips on improving video quality  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Additional Information  
Product Specifications  
Radio Frequency Transceiver  
RF Frequency  
Modulation  
2402 Mhz ~ 2483.5 Mhz  
GFSK  
Spread spectrum  
Anti Interference  
Data rate  
Frequency Hopping  
Clean Channel Dynamic Select  
2 Mbps  
Channel bandwidth  
Transmitting range  
2 MHz  
200 meters/600 feet in an open area (line of sight)  
Image Specification  
Output Image resolution 640 x 480 (VGA)/ 320 x 240 (QVGA)  
Image processing  
Exposure  
Motion JPEG  
Auto  
White balance  
Auto  
Camera Specifications  
Weight  
110 g  
Dimension  
115 x 60 x 19 mm  
Operating temperature  
Battery charging temp.  
Input voltage  
-10° C (+14° F) to +50° C (122° F )  
0° C (32° F) to +45° C (113° F )  
100-240 V AC @ 60 or 50 Hz  
5 V DC @ 1 Amp  
Operating voltage  
Power consumption  
650 mA max  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera Specifications  
Low light solution  
Low light sensitivity  
Picture sensor  
11 IR LEDs, 1 Low light sensor  
1-8 lux  
OV7725 1/4’ Color CMOS  
F3.6mm H:53 V:40  
Lens  
Polymer-Lithium Battery Warning  
CAUTION! Risk of explosion if battery is replaced by an incorrect type!  
This equipment contains a rechargeable polymer-lithium battery.  
Do not attempt to charge the battery in temperatures below 0° C (32° F) or higher than  
45° C (113° F )  
Dispose of used batteries according to the instructions.  
Do not open or mutilate the battery.  
Disconnect the battery before shipping this product.  
The rechargeable batteries contained in this equipment may explode if disposed of in a  
fire.  
Do not short-circuit the battery.  
Do not charge the rechargeable battery pack used in this equipment with in any charger  
other than the one designed to charge this battery pack as specified in the owner's  
manual. Using another charger may damage the battery pack or cause the battery pack  
to explode.  
Rechargeable Batteries Must Be Recycled or Disposed of Properly.  
Recycling and Disposal Information  
Do not dispose of electronic devices or any of their components (especially batteries  
and LCD displays) in your municipal trash collection.  
Consult your local waste management authority or a recycling organization like  
Earthꢂ11.com to find an electronics recycling facility in your area.  
If you are unable to locate proper recycling facilities in your area, please return this  
product to Uniden for recycling.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FCC Compliance Information  
Part 15 Compliance Statement  
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with limits for a Class B digital  
device, pursuant to Part 15 of the FCC rules and ETSI (EN) 300328. These limits are designed  
to provide reasonable protection against harmful interference in residential installations.  
This equipment generates, uses, and can radiate radio frequency energy, and if not  
installed and used in accordance with the instructions, may cause harmful interference to  
radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause interference to radio or television equipment reception, which  
can be determined by turning the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Move the equipment away from the receiver.  
Plug the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/television technician for additional  
suggestions.  
CAUTION! Any changes or modifications to this equipment not expressly approved  
by the party responsible for compliance could void your authority to operate the  
equipment.  
RF Exposure Information  
The antenna used for this transmitter must be installed to provide a separation distance  
of at least 20 cm (ꢁ.ꢂ”) from all persons and must not be collocated or operating in  
conjunction with any other antenna or transmitter.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IC Compliance Information  
Radio Equipment Notice  
The term “IC:” before the radio certification number only signifies that Industry Canada  
technical specifications were met. Operation is subject to the following two conditions: (1)  
this device may not cause interference, and (2) this device must accept any interference,  
including interference that may cause undesired operation of the device. “Privacy of  
communications may not be ensured when using this device”.  
CE Compliance Information  
Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage Directive  
(ꢁ3/23/EEC); R&TTE(1ꢂꢂꢂ/5/EC) issued by the Commission of the European Community.  
Compliance with these directives implies conformity to the following European Norms:  
EMC: EN 301 48ꢂ  
LVD: EN ꢀ0ꢂ50  
Radio: EN 300 328  
One-year Limited Warranty  
Important: Evidence of original purchase is required for warranty service.  
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY:  
Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free  
from defects in materials & craftsmanship with only the limitations or exclusions set out  
below.  
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further  
effect 12 months after the date of original retail sale. The warranty is invalid if the Product  
is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used  
as part of any conversion kits, subassemblies, or any configurations not sold by Uniden,  
(C) improperly installed, (D) serviced or repaired by someone other than an authorized  
Uniden service center for a defect or malfunction covered by this warranty, (E) used in  
any conjunction with equipment or parts or as part of any system not manufactured by  
Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s  
manual for this product.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty  
at any time while this warranty is in effect, warrantor will either, at its option, repair or  
replace the defective unit & return it to you without charge for parts, service, or any  
other cost (except shipping & handling) incurred by warrantor or its representatives in  
connection with the performance of this warranty. Warrantor, at its option, may replace  
the unit with a new or refurbished unit.  
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING  
TO THE PRODUCT & IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE  
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,  
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE  
FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.  
Some states do not allow this exclusion or limitation of incidental or consequential  
damages so the above limitation or exclusion may not apply to you.  
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other  
rights which vary from state to state. This warranty is void outside the United States of  
America & Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the  
instructions in the owner’s manual you are certain that the Product is defective, pack the  
Product carefully (preferably in its original packaging). Disconnect the battery from the  
Product & separately secure the battery in its own separate packaging within the shipping  
carton. The Product should include all parts & accessories originally packaged with the  
Product. Include evidence of original purchase & a note describing the defect that has  
caused you to return it. The Product should be shipped freight prepaid, by traceable  
means, to warrantor at:  
Uniden America Service  
4ꢁ00 Amon Carter Blvd.  
Fort Worth, TX ꢁꢀ155  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Technicolor Thomson MP3 Player PDP2814 User Manual
TOA Electronics Digital Camera C CV14 CS User Manual
Topcom Network Router 874B User Manual
Toshiba Computer Drive MK2060GSC User Manual
Toshiba Digital Photo Frame L80 User Manual
Toshiba Network Card PCX2200 User Manual
Toshiba Telephone 2000 series User Manual
Triax Car Satellite TV System 120 User Manual
Tripp Lite TV Cables B125 150 User Manual
Vivotek Digital Camera IP2111 User Manual