Use a n d Ca re Gu id e
Re frig e ra t o r Dra w e r Mo d e l:
2175DWRR
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Table of Contents
Introduction ...............................................................................................................................2
Warranty Registration .......................................................................................................2
Please Record Your Model Information ...........................................................................2
Table of Contents .......................................................................................................................3
Safety Precautions ......................................................................................................................5
Safety Alert Definitions .....................................................................................................5
General Precautions ...........................................................................................................5
Product Features ........................................................................................................................6
Échelon Model 2175DWRR Refrigerator ..........................................................................6
Operation ...................................................................................................................................7
Initial Startup .....................................................................................................................7
Interior Lighting .................................................................................................................7
Electronic Control Panel ....................................................................................................7
Normal Operating Sounds .................................................................................................8
Food Storage ......................................................................................................................9
Storage, Vacation, Moving ..............................................................................................10
Product Disposal ...............................................................................................................10
Cleaning and Maintenance .....................................................................................................11
General Cleaning .............................................................................................................11
Maintenance ....................................................................................................................11
Service .......................................................................................................................................13
Before Calling for Service ................................................................................................13
If Service is Required ........................................................................................................13
Replacement Parts ...........................................................................................................13
Troubleshooting Guide ....................................................................................................14
Electronic Control Quick Guide .......................................................................................15
U-Line Corporation Limited Warranty ....................................................................................19
2175DWRR
3
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank
4
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
3 Safety Precautions
SHOCK HAZARD - Electrical Grounding Required.
• Never attempt to repair or perform
maintenance on the unit until the electricity
has been disconnected.
• Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.
• Altering, cutting of power cord, removal of
power cord, removal of power plug, or direct
wiring can cause serious injury, fire and/or loss
of property and/or life, and will void the
warranty.
• PLEASE READ all instructions completely before
attempting to install, operate, or service your
unit.
• Proper installation procedures must be followed
if this unit is being initially installed, or is moved
to a new location after being in service. An
INSTALLATION GUIDE for your unit, providing
complete installation information is available
from U-Line Corporation directly, and must be
consulted before any installation is begun. U-Line
contact information appears on the rear cover of
this guide.
• This unit requires connection to a grounded
(three-prong), polarized receptacle that has been
placed by a qualified electrician in accordance
with applicable electrical codes.
• Never use an extension cord to connect power
to the unit.
• Always keep your working area dry.
WARNING
Safety Alert Definitions
The Anti-Tip Kit must be installed on this unit
before it is used. Never use the drawers as steps
or as a shelf to support more than the drawers’
contents. Serious personal injury could occur.
Safety items throughout this guide are labeled with a
Danger, Warning or Caution based on the risk type:
DANGER
CAUTION
Danger means that failure to follow this safety
statement will result in severe personal injury or
death.
• Use care when moving and handling the unit. Use
gloves to prevent personal injury from sharp
edges.
• If your model requires defrosting, DO NOT use any
type of heater to defrost. Using a heater to speed
up defrosting can cause personal injury and
damage to the inner lining.
WARNING
Warning means that failure to follow this safety
statement could result in serious personal injury
or death.
IMPORTANT
CAUTION
• Do not lift unit by drawer handles.
• Never install or operate the unit behind closed
doors. Be sure front grille is free of obstruction.
Obstructing free air flow can cause the unit to
malfunction and may void the warranty.
• Failure to clean the condenser every three months
can cause the unit to malfunction. This could void
the warranty.
Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.
General Precautions
Use this appliance for its intended purpose only and
follow these general precautions along with those listed
throughout this guide:
• Allow unit temperature to stabilize for 24 hours
before use.
• If your model requires defrosting, never use an
ice pick or other sharp instrument to help speed
up defrosting. These instruments can puncture
the inner lining or damage cooling unit.
• Use only genuine U-Line replacement parts.
Imitation parts can damage the unit, affect its
operation or performance and may void the
warranty.
DANGER
RISK OF CHILD ENTRAPMENT. Before you throw away
your old refrigerator or freezer, take off the doors
and leave shelves in place so that children may not
easily climb inside.
2175DWRR
5
Download from Www.Somanuals.com. All Manuals Search And Download.
• Stainless steel drawer interiors are corrosion-resistant
and provide a sleek, professional appearance.
4 Product Features
• Heavy duty, full extension drawer slides permit easy
accessibility to contents in the back of drawers.
Échelon Model 2175DWRR
Refrigerator
• All models feature a vinyl clad steel cabinet that
provides a rich textured look, and resist scratching,
peeling and flaking.
A 5.5 cu ft (156 L) built-in under counter refrigerated
drawer unit
• Black units come standard from the factory equipped
for full overlay panels. However, the drawers can
accommodate custom 1/4" (0.64 cm) thick panels.
NOTE: If neither full overlay nor 1/4" (0.64 cm) thick
panels will be used, U-Line recommends replacing the
existing handles with the replacement drawer handles
(P/N 26070-01).
Features of Échelon
• An electronic control panel with digital display allows
you to display the actual temperature in the drawer
and adjust the temperature setting to your personal
preference. The electronic control and digital display
provide an attractive appearance, and its method of
control provides precise temperature settings.
• The Model 2175DWRR Refrigerator cannot be
configured for a free-standing installation. It must be
installed as a built-in under counter unit, and be
anchored to prevent tipping, using the originally
provided anti-tip kit.
• An interior light will illuminate automatically in each
drawer as it is opened.
NOTE: A blackout/Sabbath mode (not Star K certified)
allows you to darken both interior lights and the LED
display, while maintaining complete temperature
control in the unit.
Features and specifications are subject to change without
notice.
• Automatic (cycle) defrost means maintenance-free
defrosting.
• Multiple organizing features, allowing you to
customize your refrigeration space, include:
a. An adjustable Slide and Divide organizer is standard
in the top drawer and can be used in either drawer.
It is easily adjusted from front to back and side to
side.
b. A clear organizing bin in the top drawer can
accommodate wine bottles, two-liter bottles or
other items. The bin is designed to slide from the
front to rear of the drawer allowing easy access to
items in or beneath the bin.
c. A bottom drawer crisper can be removed from
either side of the drawer to bring fruit or vegetables
to a sink, counter top or bar.
d. The glass crisper shelf allows the crisper contents to
be easily seen. The shelf can be fully removed to
accommodate storage of taller items.
• Stainless steel units feature full wrap stainless steel
drawer fronts with sculpted handles.
6
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
Interior Lighting
5 Operation
The interior drawer lights are controlled by individual
switches on each drawer. As a drawer is opened, the light
will go “ON.” The light will go “OFF” when the drawer is
closed.
The LIGHT icon (Figure 3, 5) on the control panel is used
to control an additional lighting function. The blackout/
Sabbath mode (not Star K certified) will turn the interior
lights and display (Figure 3, 3) off for a preset 36-hour
period.
ULIN_0080_A
Figure 2
To access the blackout/Sabbath mode (not Star K
certified):
IMPORTANT
1. Touch and hold the LIGHT icon (Figure 3, 5) for ten
seconds and release (the °F symbol will flash briefly at
the end of the ten second period).
Proper air flow is required for your unit to operate
at its highest efficiently. A grille, located in the base
of the unit, must not be blocked at any time, or
your unit will not perform as expected (Figure 2).
2. The interior light and control display (Figure 3, 3) will
go dark for the next 36 hours.
Initial Startup
NOTE: Although the display will not be visible, the
temperature controls in the unit remain active and the
interior temperature will be maintained.
All U-Line units are shipped with controls that are preset.
No initial adjustments are required.
3. To exit the blackout/Sabbath mode (not Star K
certified) manually at any time, repeat Step 1.
IMPORTANT
U-Line recommends the unit be allowed to run
overnight prior to loading the refrigerator with
product.
Electronic Control Panel
1
2
3
4
5
NOTE: Control display is located inside top drawer.
1
2
3
4
5
ULIN_0058_A
Figure 4
The electronic control with digital display (Figure 4) is
configured to show a single temperature continuously.
This set-point temperature is a base number used by the
controller to maintain the temperature zone in your unit.
The factory default set-point is 38°F. This set-point
temperature is used as a gauge if further temperature
adjustments are required.
ULIN_0058_A
Figure 3
To turn the unit on or off, touch and hold the POWER icon
(Figure 3, 1) on the display panel for approximately ten
seconds until the °F symbol flashes and release.
• A small LED above the icon will illuminate to confirm
the touch of any controller icon.
Temperature Display Selection
• The display (Figure 3, 3) will show the unit set-point
temperature (38°F) when the unit is on and will show
OFF when the unit is off.
U-Line products supplied for 110 VAC operation have
temperatures displayed in a default Fahrenheit (°F)
configuration (Figure 4, 3). Models supplied for 220 VAC
operation have temperatures displayed in a default
Celsius (°C) configuration.
• Turning the unit off will override any other control
function.
The display can easily be adjusted for either type of
temperature display. Press and hold the LIGHT icon
(Figure 4, 5) and within five seconds press the COOLER
icon (Figure 4, 4) three times to change the display as
desired.
2175DWRR
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature Display
Normal Operating Sounds
To display the interior temperature:
All models incorporate rigid foam insulated cabinets to
provide high thermal efficiency and maximum sound
reduction for its internal working components. In spite of
this technology, your model may make sounds that are
unfamiliar.
1. Touch and hold the WARMER icon (Figure 4, 2) for
approximately five seconds and release when the °F
symbol in the display (Figure 4, 3) begins to flash.
2. The display (Figure 4, 3) will indicate the actual
Normal operating sounds may be more noticeable
because of the unit’s environment. Hard surfaces such as
cabinets, wood/vinyl/tiled floors and paneled walls have a
tendency to reflect normal appliance operating noises.
refrigerator temperature.
3. After approximately 10 seconds, the set-point
temperature will return to the display.
Factors which affect the internal temperatures of the
cabinet include:
Common refrigeration components, and a brief
description of the normal operating sounds they make,
are listed below. NOTE: Your product may not contain all
of the components listed.
• Temperature setting.
• Ambient temperature where installed.
•
•
•
•
Compressor: The compressor makes a hum or pulsing
sound that may be heard when it operates.
• Number of times and length of time the door is
opened and closed.
Evaporator: Refrigerant flowing through an evaporator
may sound like boiling liquid.
• Installation in direct sunlight or near a heat source.
Adjusting Temperature
Condenser Fan: Air moving through a condenser may be
heard.
IMPORTANT
Automatic Defrost/Drain Pan: Water may be heard
dripping or running into the drain pan when the unit is in
the defrost cycle.
Adjust the set-point temperature in single
increments, and wait 24 hours for the temperature
to stabilize before rechecking.
1
2
3
4
5
ULIN_0058_A
Figure 5
To adjust the set-point temperature:
1. Press and release either the WARMER (Figure 5, 2) or
COOLER (Figure 5, 4) icon to put the controller in the
SET TEMPERATURE mode. The °F symbol (Figure 5, 3)
will begin to flash.
NOTE: If no further action is taken, this mode will self
cancel in five seconds and the original set-point
temperature will be displayed.
2. While the °F symbol is flashing, press the WARMER or
COOLER icon as required to adjust the set-point
temperature.
3. The change will be set five seconds after adjusting the
temperature and the new set-point temperature will be
displayed.
8
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
Food Storage
CAUTION
Drawers
When opening or closing the crisper, pull or push
slowly and carefully. If the crisper is pulled out too
far or pushed in too hard, it could come out all the
way and possibly cause product damage or personal
injury.
The drawers should only be removed for servicing by a
trained and certified repair person.
Top Storage Bin
Drawer Organizer
Adjust the drawer organizer to compensate for different
sized bottles or items. The organizer can be used in either
drawer, but is shipped from the factory in the top drawer.
1
An accessory organizer (U-Line P/N 80-48001-00) can be
purchased to keep both drawers organized.
1
ULIN_0086_A
Figure 6
Grasp the bin handle and slide backward to access the
contents below (Figure 6). The bin may be completely
removed for cleaning once it is slid forward, making sure
it clears the guides on each side of the drawer. Then lift
straight up. If heavy items are stored in bin, push front of
bin down slightly while sliding. Slide bin forward,
especially with heavy items, to ensure that drawer closes
completely.
ULIN_0084_A
Figure 8
The organizer may be adjusted left-to-right or front-to-
back as required. When adjusting the organizer, open the
drawer fully, remove all items, and brace the drawer to
prevent movement. To adjust, turn the drawer organizer
knob (Figure 8, 1) counterclockwise to loosen and use
two hands to position as desired. Tighten knob after
adjustment is made. Do not over-tighten.
Crisper
1
Clean the drawer organizer with warm water and a mild
detergent only. Do not use solvent-based or abrasive
cleaners and do not place the drawer organizer in a
dishwasher.
ULIN_0085_A
Figure 7
To access the crisper, open the bottom drawer fully. Grasp
the handle to either side of the crisper (Figure 7) and
slide just enough to access the contents. To remove
crisper, support both ends and slide out completely. To
remove the glass crisper cover (Figure 7, 1), remove the
crisper and push up on cover from bottom.
2175DWRR
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage, Vacation, Moving
1
If the unit will not be used for an extended period, or
otherwise stored, follow these steps completely:
WARNING
Electrical Shock Hazard. Disconnect power before
servicing. Before operating, replace all panels.
Failure to do so may result in death or electrical
shock.
1. Remove all consumable contents from the unit.
2. Disconnect the power cord from its outlet, and leave it
disconnected until the unit is returned to service.
3. Clean and dry the interior of the cabinet (See CLEANING
AND MAINTENANCE: GENERAL CLEANING).
ULIN_0088_A
4. During periods of non-use, the cabinet must remain
open to prevent the formation of mold and mildew.
Open door a minimum of 2 in. (5 cm) to provide the
necessary ventilation.
Figure 9
Be sure that items stored in the rear of the top drawer do
not interfere with the sliding operation of the storage
bin. Tall items such as milk jugs can be stored toward the
front of the drawer as long as they do not interfere with
the closing of the drawer. Taller items can be stored on
their side (Figure 9, 1) in the storage bin.
Product Disposal
If the unit is being removed from service for disposal,
check and obey all Federal, State and/or Local regulations
regarding the disposal and recycling of refrigeration
appliances, and follow these steps completely:
The storage bin is designed to accommodate the storage
of two wine bottles, even when opened.
1. Remove all consumable contents from the unit.
Place the bottle in the bin so that the neck of the bottle
rests on the front lip of the bin.
2. Disconnect power to the unit and unplug the power
cord from its outlet.
DANGER
RISK OF CHILD ENTRAPEMENT. Before you throw
away your old refrigerator or freezer, remove the
drawers.
3. Remove the drawers from the unit, and secure all
shelving and accessories to the interior of the unit using
a heavy duty cloth or package sealing tape.
10
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
6 Cleaning and Maintenance
General Cleaning
Proper maintenance of your U-Line product will ensure
efficiency, top performance and long life. The
maintenance intervals listed are based on normal
conditions. You may want to shorten the intervals if you
have pets or other special considerations.
Exterior Cleaning (As Required)
Black Models:
Defrosting
• Surfaces may be cleaned with a mild detergent and
warm water solution. Do not use solvent-based or
abrasive cleaners. Use a soft sponge and rinse with
clean water. Wipe with a soft, clean towel to prevent
water spotting.
Automatic (Cycle) Defrost Models
Automatic defrost models do not produce frost in normal
operating conditions. However, a frost pattern may be
noticed on the interior walls if the unit is repeatedly
opened in a high heat or high humidity location. If this
frost pattern does not clear within 24 hours, your unit will
require manual defrosting.
Stainless Steel Models:
• Stainless steel surfaces and components can discolor
when exposed to chlorine gas, pool chemicals, salt
water or cleaners with bleach.
WARNING
• Keep your stainless steel unit looking new by cleaning
with a good quality all-in-one stainless steel cleaner/
DO NOT use any type of electrical heating device,
ice pick, knife or other sharp instrument to
defrost; this could damage the inner lining or
refrigeration system and void the warranty.
®
polish on a monthly basis. For best results use Claire
Stainless Steel Polish and Cleaner, which can be
purchased from U-Line Corporation (P/N 173348).
Comparable products are acceptable. Frequent
cleaning will remove surface contamination that could
lead to rust. Some installations may require cleaning
on a weekly basis.
IMPORTANT
The drain pan was not designed to capture the
water created when manually defrosting. To
prevent water from overflowing the drain pan,
place towels or other absorbent materials over the
interior drain trough, under the evaporator (Figure
10, 1), before defrosting.
• Do not clean with steel wool pads.
• Do not use cleaners that are not specifically
intended for stainless steel on stainless steel
surfaces (this includes glass, tile and counter
cleaners).
• If any surface discoloring or rusting appears, clean it
®
®
quickly with Bon-Ami or Barkeepers Friend Cleanser
and a non-abrasive cloth. Always clean in the direction
of the grain. Always finish this process with Claire
Stainless Steel Polish and Cleaner or comparable
product to prevent further problems.
• Using abrasive pads such as Scotchbrite™ will
cause the graining in the stainless steel to
become blurred.
• Rust that is not cleaned up promptly can penetrate into
the surface of the stainless steel and complete removal
of the rust may not be possible.
Interior Cleaning (As Required)
• Disconnect power to the unit. Clean the interior and all
removed components using a mild non-abrasive
detergent and warm water solution applied with a soft
sponge or non-abrasive cloth. Rinse the interior using a
soft sponge and clean water.
1
ULIN_0260_A
Figure 10
• Do not use any solvent-based or abrasive
cleaners. These types of cleaners may transmit
taste to the interior products and damage or
discolor the interior.
IMPORTANT
Do not place top storage bin, drawer organizer or
the crisper bin in dishwasher. Dishwasher will warp/
discolor items and render them useless.
2175DWRR
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To defrost:
CAUTION
1. Turn the unit off.
DO NOT use any type of cleaner on the condenser
unit.
2. Remove all products from the interior and leave the
drawers in an open position (2" (5 cm) minimum).
4. Clean the condenser coil (Figure 11, 2) using a soft
brush with a “combing” action or vacuum cleaner. Do
not touch the condenser coil.
3. Allow the frost to completely melt naturally. Clean the
interior and all removed components using a mild non-
abrasive detergent and warm water solution applied
with a soft sponge or non-abrasive cloth. NOTE: DO
NOT use any solvent-based or abrasive cleaners. They
will discolor or damage the interior.
5. Position the grille to align the mounting screws with
the holes in the cabinet.
6. Secure, but do not over-tighten both grille screws.
7. Reconnect power to the unit.
4. Dampen a soft sponge or non-abrasive cloth in clean
water and wipe down the cabinet interior and removed
components to remove any detergent residue. Rinse the
sponge or cloth in clean water and repeat as necessary
until the cabinet and components are clean.
Leveling
NOTE: It is recommended that the unit is level.
5. When the interior is dry, turn the unit on.
Condenser Cleaning
Interval - Every Three Months
To maintain operational efficiency, keep the front grille
free of dust and lint and clean the condenser every three
months. Depending on environmental conditions, more
or less frequent cleaning may be necessary.
WARNING
Disconnect electric power to the unit before
cleaning the condenser.
To remove and replace the grille for access to the
condenser fins, follow this procedure:
ULIN_0045_A
Figure 12
1
1. Use a level to check the levelness of the unit from
front to back and from side to side. Place the level
along top edge and side edge as shown (Figure 12).
2
ULIN_0203_A
Figure 11
1. Disconnect electrical power to the unit.
2. Loosen two screws (Figure 11, 1) completely.
ULIN_0046_A
Figure 13
NOTE: Screws are held in the grille by o-ring retainers,
and will not come free of the grille.
3. Remove the grille.
2. If the unit is not level, adjust the feet on the corners of
the unit as necessary (Figure 13)
.
WARNING
3. Check the levelness after each adjustment and repeat
the previous steps until the unit is level.
DO NOT touch the condenser fins. The condenser
fins are SHARP and can be easily damaged.
12
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
Light Bulb Replacement
7 Service
To replace the light bulb in your U-Line unit:
Before Calling for Service
If your U-Line product appears to be malfunctioning, read
through the OPERATION section of this guide to ensure
that the function of all controls are clearly understood. If
the malfunction persists, the TROUBLESHOOTING GUIDE
in this guide will assist you in quickly identifying common
problems, and provide information on possible causes and
remedies. Most often, this will resolve the problem
without the need to call for service.
2
1
ULIN_0001_A
Figure 14
1. Grasp the edges of the light housing lens
(Figure 14, 1) opposite the exposed tab and gently
push the lens toward the tab (Figure 14, 2).
If Service is Required
If you do not understand a troubleshooting remedy, or
your product needs service, contact U-Line Corporation
directly. Contact information appears on the rear cover of
this guide.
2. Pull the edge of the lens down (Figure 14, 1) and
swing it out of the light housing.
IMPORTANT
You will be asked for your product Model and Serial
Numbers. This information should be recorded inside the
front cover of this guide, following the products original
purchase. It also appears on the Model and Serial number
plate located on the upper right or rear wall of the
interior of your product.
ALWAYS use a genuine U-Line replacement bulb (P/N
31317) in the light housing. Use of any other bulb
within the housing will generate excessive heat,
causing damage to the light housing and cabinet
interior, and will compromise the precise
temperature control of your unit.
Replacement Parts
3. Replace the bulb only with a genuine U-Line P/N 31317
replacement.
When you need replacement parts, always request that
genuine U-Line replacements be used. U-Line products
have been designed and engineered using components
that work efficiently, and provide superior service life and
performance. The use of aftermarket parts or components
may affect the safety, operation, performance or
4. Replace the lens by first inserting the tab side back into
the housing at a slight angle. While gently pushing the
lens towards the tab end, push the free end up into the
housing, and release when you will hear a snap/click.
durability of your product, and may also void its warranty.
2175DWRR
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
DANGER
ELECTROCUTION HAZARD
Never attempt to repair or perform maintenance on
the unit until the main electrical power has been
disconnected.
Troubleshooting - What to check when problems occur:
PROBLEM
POSSIBLE CAUSE
REMEDY
Unit does not operate and
electronic display is blank.
No electrical supply
Plug unit in or check circuit breaker.
No interior light
Loose or burned out bulb
Tighten or replace bulb (See MAINTENANCE; LIGHT
BULB REPLACEMENT).
Electronic display is blank and
interior light is off with drawer
open.
Unit is in blackout/Sabbath mode
(not Star K certified).
Exit blackout/Sabbath mode (not Star K certified)
(See OPERATION; INTERIOR LIGHT CONTROL).
Electronic display is blank and
interior light is on with drawer
open.
A display function has changed.
Touch and hold the warmer temperature button and
touch and release the POWER button three times, then
release the temperature button. The display should
become visible.
Electronic display shows repeating,
randomly flashing symbols and
partial characters.
A factory control mode has been
inadvertently entered.
Touch and hold the warmer temperature button and
touch and release the LIGHT button three times, then
release the temperature button to exit the factory
control mode. The set-point temperature should now
be displayed.
Electronic display shows:
0, 1 to 26, or 99.
A factory control mode has been
inadvertently entered.
Repeatedly touch the warmer temperature button to
advance any number shown to 99 and touch and
release the LIGHT button. The set-point temperature
should now be displayed.
Electronic display shows E3 or E10.
Drawer(s) open longer than 20
minutes
Close drawer(s) completely. The set-point temperature
should now be displayed.
Electronic display shows one or
more of the following:
The unit is displaying an error code. Record the error code(s) displayed and call for service.
E1, E2, E4, E5, E6, E7, E8, E9, E11, P1.
Unit not cold enough. Check
temperatures (See OPERATION for
approximate temperatures).
Control set too warm
Set control to a cooler setting (See OPERATION). Allow
24 hours for temperature to stabilize.
Airflow to front grille blocked
Dirty condenser coils
Airflow must not be obstructed to front grille (See
OPERATION).
Clean condenser (See MAINTENANCE; CONDENSER
CLEANING).
Door gasket not sealing properly
Door adjustment required (See MAINTENANCE; DOOR
ALIGNMENT CHECK AND ADJUSTMENT).
Item(s) interfering with drawer
Inaccurate temperature reading
Reposition or remove item(s).
Properly check temperature (See OPERATION).
Unit is too cold. Check temperatures Control set too cold
(See OPERATION for approximate
temperatures)
Set control to a warmer setting (See OPERATION). Allow
24 hours for temperature to stabilize.
The unit frosts up.
High ambient temperatures or
humidity
Defrost unit manually (See MAINTENANCE;
DEFROSTING).
Drawers not closed
Close drawers and wait 24 hours. If frost has not cleared
up, must manual defrost (See page 11).
Noise during operation
Drawer(s) can't close.
Certain sounds are normal.
Soft sounds from the fan and water/dropping sounds
from the ice maker will be heard.
Item(s) interfering with drawer
Unit not level
Adjust items in drawer(s).
Make sure unit is level (See LEVELING, page 12).
14
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic Control Quick Guide
All Models
Task
Touch
Touch
Display
Comment
Turn ON/OFF
Hold 10 seconds
Release when °F flashes.
or
°F flashes after first touch,
set-point saved after 5
seconds of inactivity and °F
stops flashing.*
or
or
Adjust
Temperature
Touch to change temperature
Touch and release
View Actual
Temperature
For Wine Coolers, see Use
and Care Manual.
Hold 5 seconds
Hold
Release when °F flashes.
Change °F-°C
or
Repeat to switch back.
Blackout
Mode
Display (and cabinet light) not Hold light for 10 seconds to
operable in Blackout Mode. exit.
Hold 10 seconds
* Drawer Wine Cooler: Initially, top bar will flash to set to zone. After five seconds of inactivity (or touching light button), the bottom
zone (bottom bar on F flashing) can be adjusted. After five seconds of inactivity, set-point will be stored in unit.
Glass Door Models
Task
Touch
Touch
Display
Comment
Light normally goes on/off
with door opening. Pressing
light button will turn
Cabinet Light
interior light on for 4 hours,
then it will turn off.
Display off when door is
closed (unless cabinet light is
switched on). Repeat to
switch back.
Display Off
Mode
Hold
All Ice Makers
Task
Touch
Touch
Display
Comment
Ice Maker Off
Mode
Hold
Repeat to switch back
Clear Ice & Clear Combo Only
Task
Touch
Touch
Display
Comment
Will automatically return to
ice production when clean
cycle is complete.
Clean Cycle
Hold
Ice Thickness
Adjustment
Hold
Hold
Use warmer/colder to scroll.
Temporary
Shutdown
(Office Mode)
Ice maker will automatically
turn back on in three hours.
NOTE: 38°F is an example; the display will vary with actual set-point.
IMPORTANT
Factory recommended set-point is 38°F for refrigerators and beverage centers, and 50°F for wine coolers.
2175DWRR
15
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank
16
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank
2175DWRR
17
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank
18
2175DWRR
Download from Www.Somanuals.com. All Manuals Search And Download.
U-Line Corporation Limited Warranty
U-Line Corporation warrants each U-Line product to be free from defects in materials and workmanship for a period of
one year from the date of purchase; and warrants the sealed system (consisting of the compressor, the condenser, the
evaporator, the hot gas bypass valve, the dryer and the connecting tubing) in each U-Line product to be free from
defects in materials and workmanship for a period of five years from the date of purchase. During the initial one-year
warranty period for all U-Line products U-Line shall: (1) at U-Lines option, repair any product or replace any part of a
product that breaches this warranty; and (2) for all Marine, RV and Domestic U-Line products sold and serviced in the
United States (including Alaska and Hawaii) and Canada, U-Line shall cover the labor costs incurred in connection with
the replacement of any defective part. During years two through five of the warranty period for the sealed system, U-
Line shall: (1) repair or replace any part of the sealed system that breaches this warranty; and (2) for all Marine, RV and
Domestic U-Line products sold and serviced in the United States (including Alaska and Hawaii) and Canada, U-Line shall
cover the labor costs incurred in connection with the replacement of any defective part of the sealed system. All other
charges, including transportation charges for replacements under this warranty and labor costs not specifically covered
by this warranty, shall be borne by you. This warranty is extended only to the original purchaser of the U-Line product.
The Registration Card included with the product should be promptly completed by you and mailed back to U-Line or you
The following are excluded from this limited warranty: installation charges; damages caused by disasters or acts of God,
such as fire, floods, wind and lightening; damages incurred or resulting from shipping, improper installation,
unauthorized modification, or misuse/abuse of the product; customer education calls; food loss/spoilage; door and water
level adjustments (except during the first 90 days from the date of purchase); defrosting the product; adjusting the
controls; door reversal; or cleaning the condenser.
If a product defect is discovered during the applicable warranty period, you must promptly notify either the dealer from
whom you purchased the product or U-Line at P.O. Box 245040, Milwaukee, Wisconsin 53224 or at 414-354-0300. In no
event shall such notification be received later than 30 days after the expiration of the applicable warranty period. U-Line
may require that defective parts be returned, at your expense, to U-Lines factory in Milwaukee, Wisconsin, for
inspection. Any action by you for breach of warranty must be commenced within one year after the expiration of the
applicable warranty period.
This limited warranty is in lieu of any other warranty, express or implied, including, but not limited to any
implied warranty of merchantability or fitness for a particular purpose; provided however, that to the
extent required by law, implied warranties are included but do not extend beyond the duration of the
express warranty first set forth above. U-Lines sole liability and your exclusive remedy under this warranty
is set forth in the initial paragraph above. U-Line shall have no liability whatsoever for any incidental,
consequential or special damages arising from the sale, use or installation of the product or from any other
cause whatsoever, whether based on warranty (express or implied) or otherwise based on contract, tort or
any other theory of liability.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.
2175DWRR
19
Download from Www.Somanuals.com. All Manuals Search And Download.
F o r G e n e r a l In q u i r i e s :
P.O. Box 245040
Milwaukee, Wisconsin
53224-9540 U.S.A.
Phone (800) 779-2547
FAX (414) 354-5696
Fo r Se rvice a n d Pa rt s
Assist a n ce :
Phone (800) 779-2547
(414) 354-0300
FAX (414) 354-5696
Email:
OnLineService@U-Line.com
E-mail:
OnlineParts@u-line.com
For more than four decades, U-Line has distinguished itself as the
leader in built-in under-counter ice making, refrigeration and
wine storage appliances.
An INSTALLATION MANUAL for your unit, providing complete
installation information, is available for download at
including panel size, and instructions are available by visiting
When you need replacement parts, always request genuine U-Line
replacements be used. Visit www.U-Line.com to locate a parts
distributor in your area.
U-Line Corporation, located in Milwaukee, WI, is a family operated manufacturer of built-in
undercounter ice makers, Combo® ice maker/refrigerators, Wine Captain® wine storage units,
refrigerators, refrigerated drawers and refrigerator/freezers.
©2007 U-Line Corporation
Publication No. 30093
02/2007 Rev. B
Download from Www.Somanuals.com. All Manuals Search And Download.
|