Owner’s Manual
VGA with Serial
Over Cat5 Extender Kit
Model: B130-101S
Español
Français
7
13
1111 W. 35th Street, Chicago, IL 60609 USA
Note: Follow these instructions to ensure proper operation and prevent damage
to this device and its connected equipment.
Copyright © 2009 Tripp Lite. All rights reserved.
All trademarks are the property of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Signal Type..............................VGA, SVGA, XGA, UXGA and WUXGA
Video Amplifier Bandwidth....350 Mbps
Input DDC Signal ...................0.7 Volts p-p (TTL)
Signal Noise Ration ................90 dB
Local Unit Ports......................(2) HD15 Female, (1) 3.5mm Female,
(1) RJ45 Female
Remote Unit Ports...................(1) HD15 Female, (1) 3.5mm Female,
(1) RJ45 Female
Power Supply..........................(2) 5V, 2.0A DC Power Supplies
Dimensions (Local Unit).........4.4 x 2.2 x 1.1 (In)
Dimensions (Remote Unit) .....3.7 x 2 x 1.1 (In)
Local Unit Weight...................0.5 lbs (215g)
Remote Unit Weight................0.4 lbs (187g)
Note: Specifications are subject to change without notice. Mass and dimensions are
approximate; please take the actual products as the standard.
Panels Layout
Local Unit
4
5
5
6
1
2
3
Receiver Unit
4
7
8
6
9
10
EQ
Receiver
Bottom Panel
Gain
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Function Description
Local Video-Out Port: HD15 female connector.
Serial Port: The included 3.5 mm Male to DB9 Female adapter cable
connects here.
1
2
Source Video-In Port: HD15 female connector.
Power LED: Power LED illuminates when unit is receiving power.
Power Jack: Power plug for 5V 2.0A DC power supply.
3
4
5
6
Link: RJ-45 Modular Jack which connects the Local Unit and the
Remote Unit.
Serial Port: The included 3.5 mm Male to DB9 Male adapter cable
connects here.
7
Remote Video-Out Port: HD15 female connector.
EQ Adjustment: Adjust equalization length.
Gain Adjustment: Adjust brightness.
8
9
10
Installation
Remote Unit
Touch-Screen
Monitor
Local Unit
Note: You should test to make sure the entire installation works properly before pulling
cables through ceilings/walls.
Connect the HD15 port on the computer to the Sorce Video port on the
Local Unit using a VGA cable.
Connect the included 3.5 mm Male to DB9 Female adapter to the Serial
port on the Local Unit.
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Installation continued
Connect the DB9 port on the computer to the DB9 port on the adapter
cable.
(Optional) Connect a local monitor to the Local Video port on the Local
Unit using a VGA cable.
Connect the external power supply to the power jack on the Local Unit
and plug it into an appropriate power source.
Connect the RJ45 Link ports of the Local and Remote Units using
3
4
5
6
Cat5/5e/6 cable.
Connect the HD15 port on the Remote Unit to a monitor.
Connect the included 3.5 mm Male to DB9 Male adapter cable to the
Serial port on the Remote Unit.
7
8
Connect the DB9 Male port on the adapter cable to the DB9 port of the
serial device you are connecting (touch-screen monitor, barcode scanner, etc.)
9
Connect the external power supply to the power jack on the Remote
Unit and plug it into an appropriate power source.
10
Turn the display(s) on first.
Turn on the computer.
If the video on your monitor is either too dark or too light, use the Gain
adjustment on the Remote Unit.
11
12
13
If the video on your monitor is fuzzy, or shows a ghosting effect, use the
EQ adjustment on the Remote Unit.
14
Safety Information
•
•
To reduce the risk of electric shock, do not expose this product to moisture.
Operate this product using only the included external power supply. Use
of other power supplies could impair performance, damage the product,
or cause fire.
•
•
Use only recommended accessories to avoid fire, shock or other hazards.
Unplug this product before cleaning. Use a damp cloth for cleaning. Do
not use cleaning fluids or aerosols, which could enter the unit and cause
damage, fire or electrical shock.
•
Do not attempt to service this unit. Instead, disconnect it and contact your
Authorized Reseller or technician.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Safety Information continued
•
Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life sup-
port equipment or to significantly affect its safety or effectiveness is not
recommended. Do not use this equipment in the presence of a flammable
anesthetic mixture with air, oxygen or nitrous oxide.
Warranty
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of
one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to
repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty,
you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized
TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE
service center with transportation charges prepaid and must be accompanied by a brief description of the
problem encountered and proof of date and place of purchase. This warranty does not apply to equipment
which has been damaged by accident, negligence or misapplication or has been altered or modified in any
way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specifically, TRIPP LITE is not liable for any costs, such as lost profi ts or revenue, loss of equipment, loss
of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
Warranty Registration
Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite
product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change
without notice.
1111 W. 35th Street, Chicago, IL 60609 USA
200908175 • 932930-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
6
|