Tripp Lite Network Cables SUINT1500RTXL2UA User Manual

Tripp Lite  
1111 West 35th Street  
Chicago, IL 60609 USA  
Telephone: +(773) 869 1234  
Model Number: SUINT1500RTXL2UA  
SmartOnline 1.5kVA On-Line Double-Conversion UPS, 2U Rack/Tower, 200/220/230/240V C13 outlets  
Highlights  
1500VA / 1.5kVA / 1200 watt on-line double-conversion 2U rack/tower UPS  
200/208/220/230/240V 50/60Hz output; High efficiency economy mode option  
Expandable runtime; Hot-swap batteries; 19 in / 48.3cm installed depth  
USB, RS232 & EPO ports; support for SNMP/WEB card options  
Front panel status LEDs with detailed load and battery metering  
2 independently switchable output load banks  
C14 inlet, C13 outlets, 2 C13 to C14 power cables included  
Description  
Tripp Lite's SmartOnline SUINT1500RTXL2Ua online, double conversion UPS protects critical server, networking and telecommunications  
equipment from blackouts, voltage fluctuations and transient surges. Large capacity 1.5kVA/1200 watt UPS continuously converts incoming AC to  
DC, then back to perfect sine wave AC output at selectable 200/208/220/230/240V AC (+/-2%). Removes harmonic distortion, fast electrical  
impulses, frequency fluctuations and other hard-to-solve power problems not addressed by other UPS types. Pure sine wave output and zero  
transfer time to battery offers guaranteed compatibility with all equipment types. Highly efficient operation in optional Economy Mode setting, saving  
BTU heat output and energy costs. Includes 6 IEC-320-C13 outlets arranged in two individually switchable load banks of three outlets each. Load  
banks can be controlled independently via software interface to selectively reboot remote equipment or shed less important loads to extend battery  
runtime for critical equipment. Battery backup runtime can be extended through the addition of external battery packs BP48V24-2U (limit 1),  
BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible). Network management interfaces support simultaneous  
communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power  
management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test  
data and utility power conditions via all 3 network interfaces simultaneously. Includes PowerAlert monitoring software and complete cabling.  
Emergency Power Off (EPO) interface. Compatible with Tripp Lite's WatchDog software. 4-post rackmount accessories included; optional  
2-9USTAND tower stand kit and 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal  
batteries and external battery packs. Attractive all-black color scheme.  
Package Includes  
SUINT1500RTXL2Ua Online Double-Conversion UPS System  
PowerAlert Software and Cabling  
Mounting Hardware  
Owner's Manual with Warranty Information  
1-6ft. IEC-320-C13 to IEC-320-C14 interconnect cable and 1-10ft. IEC-320-C13 to IEC-320-C14 power connection cable  
Features  
True online, double conversion UPS provides pure sine wave AC output at all times  
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time to battery  
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems  
Accepts input voltages between 130 and 275V (between 160 and 275V at loads over 70%), regulating output to 200/208/220/230/240V  
+/-2%  
1500VA / 1200 watt power capacity with 6 IEC-320-C13 output receptacles  
IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles  
2 C13 to C14 output power cables included  
Standard internal battery set provides 12 minutes runtime at half load and 4.5 minutes runtime at full load  
Optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs  
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Output AC waveform  
(AC mode)  
Sine wave  
Output AC waveform  
(battery mode)  
Pure Sine wave  
INPUT  
Rated input current  
(at maximum load)  
6.4A  
Nominal Input  
Voltage(s) Supported  
200V AC; 220V AC; 230V AC; 240V AC  
C14 inlet  
UPS input connection  
type  
UPS input connection  
description  
IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall  
receptacles  
Input circuit breaker  
10A  
Phase  
Single-Phase  
BATTERY  
Full load runtime  
(minutes)  
4.5 min. (1200w)  
Half load runtime  
(minutes)  
12 min. (600w)  
Expandable battery  
runtime  
Extended runtime supported via optional external battery packs  
External battery pack  
compatibility  
BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)  
DC system voltage  
(VDC)  
48  
Battery recharge rate  
(included batteries)  
Less than 6 hours from 10% to 80%  
Replacement battery  
cartridge (internal  
UPS battery  
replacement)  
Battery Access  
Front panel battery access door  
Battery replacement  
description  
Hot-swappable, user replaceable batteries  
VOLTAGE REGULATION  
Voltage regulation  
description  
Online, double-conversion power conditioning  
Overvoltage  
correction  
2% output voltage regulation during overvoltages to 275  
2% output voltage regulation during undervoltages to 156  
2% output voltage regulation during undervoltages to 130 (under 70% load only)  
Undervoltage  
correction  
Severe undervoltage  
correction  
LEDS ALARMS & SWITCHES  
LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery  
and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in  
rack/tower formats  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarms  
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions  
Power-fail alarm can be silenced using alarm-cancel switch  
Alarm cancel  
operation  
Switches  
2 Switches control off/on power status and alarm-cancel/self-test operation  
SURGE / NOISE SUPPRESSION  
UPS AC suppression  
joule rating  
480  
UPS AC suppression  
response time  
Instantaneous  
Yes  
EMI / RFI AC noise  
suppression  
PHYSICAL  
Installation form  
factors supported  
with optional  
2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)  
accessories  
Primary form factor  
Rackmount  
UPS / Power Module  
dimensions in  
3.5 x 17.5 x 19  
primary form factor  
(height x width x  
depth / inches)  
UPS / Power Module  
dimensions in  
8.9 x 44.4 x 48.3  
primary form factor  
(height x width x  
depth / cm)  
Rack Height  
2U  
Secondary form factor  
Tower (requires 2-9USTAND)  
47.5  
UPS / Power Module  
weight (lbs)  
UPS / Power Module  
weight (kg)  
21.6  
UPS Shipping  
9.8 x 20.2 x 24  
dimensions (height x  
width x depth / inches)  
UPS Shipping  
24.8 x 51.4 x 61  
dimensions (height x  
width x depth / cm)  
Shipping weight (lbs)  
Shipping weight (kg)  
Cooling method  
60  
27.2  
Fan  
Steel  
UPS housing material  
ENVIRONMENTAL  
Operating  
Temperature Range  
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius  
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius  
Storage Temperature  
Range  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Relative Humidity  
0 to 95%, non-condensing  
664.2  
AC mode BTU / hr.  
(full load)  
AC economy mode  
BTU / hr. (full load)  
260.4  
664.2  
86%  
Battery mode BTU /  
hr. (full load)  
AC mode efficiency  
rating (100% load)  
AC economy mode  
efficiency rating  
(100% load)  
94%  
Audible Noise  
45dBA At Front Side 1 Meter  
COMMUNICATIONS  
Communications  
interface  
USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface  
Network monitoring  
port description  
Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure  
communications  
PowerAlert software  
Included  
Communications  
cable  
USB and DB9 cabling included  
WatchDog  
Supports Watchdog application, OS and hard-reboot restart options for remote applications  
compatibility  
LINE / BATTERY TRANSFER  
Transfer time  
No transfer time (0 ms.) in online, double-conversion mode  
160V (100% load), 130V (  
Low voltage transfer  
to battery power  
(setpoint)  
High voltage transfer  
to battery power  
(setpoint)  
275  
SPECIAL FEATURES  
Cold Start (startup in  
battery mode during  
a power failure)  
Cold-start operation supported  
High availability UPS  
features  
Automatic inverter bypass; Hot swappable batteries  
Green & high  
efficiency features  
High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy  
mode operation  
CERTIFICATIONS  
UPS Certifications  
CE  
UPS Certification  
details  
Kuwait, EMI Approvals: EN62040-2  
WARRANTY  
Product Warranty  
Period (Worldwide)  
2-year limited warranty  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Related Items  
Optional Products  
Related Model  
Description  
Qty.  
BP48V27-2US - 2U External 48V Rack/Tower Battery pack for select Tripp Lite UPS  
Systems  
1
BP48V242U - External Battery Pack for UPS System  
1
1
1
External Battery Pack and Cable. 3U, Expandable, Blue 2-Point Connector  
Power Management Tools - UPS Communication Cable Kit for System i / AS400 /  
iSeries Servers  
For remote monitoring and control via MODBUS protocol  
For remote monitoring and control via SNMP, Web or Telnet  
1
1
1
Monitors temperature, humidity and contact-closure inputs. (Requires UPS with  
SNMPWEBCARD, monitored PDU or switched PDU.)  
Magnetic Door Switch Kit for front and rear doors; requires ENVIROSENSE  
Heavy-Duty 2-post Front Mounting Ear Kit  
1
1
1
1
Enables 2-Post Rackmount or Wallmount Installation of Select Rackmount UPS Systems  
Enables 2-Post Rackmount Installation of 3U and Larger UPS, Transformer and Battery  
Pack Components  
Single-Phase Basic PDU, 16A 100-240V, 1U Rackmount, C13 C19 outlets, C20 input  
and C14, L6-20P, L5-20P, 5-20P and 5-15P adapters  
1
1
Single-Phase Switched PDU, 15A 200-240V, 1U Horizontal Rackmount, 8 C13 outlets,  
C14 inlet with C14 power cable  
More information, including related products, owner's manuals, and additional technical specifications, can be found online at  
Copyright © 2014 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous  
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam Lawn Mower FW1082 User Manual
Thermador Cooktop PSC364GD User Manual
Timex Watch W253 User Manual
Toshiba Computer Drive MK4021GAS User Manual
Toshiba Laptop toshiba satellite User Manual
Trane Fan CAUC C20 User Manual
Trion Air Compressor 147207 001 User Manual
Tripp Lite Surge Protector SWIVEL6 User Manual
Tyco Table Top Game 7146 User Manual
ViewSonic Projector VS13648 User Manual