Tricity Bendix Dishwasher TBDW 41 User Manual

INSTRUCTION BOOK  
Dishwasher  
TBDW 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing programmes  
Recommended quantity  
of detergent  
Programme  
Degree of soil  
and  
type of load  
Starting  
position of the push button  
programme  
Require  
Cycle description  
Wash  
Prewash  
selector  
Cold prewash  
Main wash up to 65°C  
1 cold rinse  
1 hot rinse  
Drying  
NORMAL 65°c  
WITH  
PREWASH  
*
Normal soil  
Crockery and cutlery  
25 g  
5 g  
1
On/Off  
Main wash up to 65°C  
1 cold rinse  
1 hot rinse  
NORMAL 65°c  
NO  
PREWASH  
Light soil  
Crockery and cutlery  
On/Off  
On/Off  
2
3
30 g  
30 g  
/
/
Drying  
Light soil  
Crockery and party  
crockery  
Main wash up to 65°C  
1 cold rinse  
1 hot rinse  
** QUICK WASH  
65°c  
Any.  
1 cold rinse (to avoid  
food scraps from  
sticking together).  
RINSE  
AND HOLD  
Partial load (to be  
completed later in  
the day).  
4
On/Off  
/
/
Testing programme for EN 50242 (see "Hints for Test Centres").  
*
** This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so  
that you may re-use them promptly.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating sequence  
1. Check the filters  
8. At the end of the washing  
programme  
Ensure they are clean and properly positioned  
(see "Maintenance and cleaning").  
At the end of the programme the dishwasher will  
automatically stop.  
2. Check that there is rinse aid and  
salt  
9. Switch off the dishwasher  
Wait 15/20 minutes before opening the  
dishwasher’s door; in this way you will avoid  
burning yourself removing the dishes and avoid  
also the damage of the nearby furniture caused  
by the escape of steam.  
3. Load the dishes  
Remove any scraps of food.  
Pull the lower basket out and arrange the  
saucepans, plates and cutlery in it.  
Open the door and switch off the dishwasher by  
pressing the On/Off push button.  
Pull the upper basket out and arrange the plates,  
saucers, glasses and cups etc. in it.  
Empty the lower basket first and then the upper one;  
this will avoid water dripping from the upper basket  
onto the dishes in the lower one.  
Slide the baskets back into the machine.  
When the washing programme has finished, it  
is recommended that the dishwasher is  
unplugged and the water tap turned off.  
4. Ensure that the spray arms can  
rotate freely.  
In general it is not advisable to open the door  
while the machine is working; if the door is  
opened however, a safety device ensures that  
the machine stops.  
5. Measure out detergent  
Add the required amount of detergent into the  
dispenser according to the "Washing programmes"  
chart.  
Close the detergent dispenser lid.  
Important!  
Care must be taken if the door is opened during  
the hot phase or immediately after a  
programme has finished, as steam may escape.  
6. Set the programme  
The selection of the programme occurs with the  
door partially opened.  
Turn the programme selector dial clockwise until the  
number of the programme you wish to select  
corresponds with the programme marker on the  
control panel.  
7. Start the programme  
Depress the On/Off push button and close the door,  
the machine will start.  
If you wish to interrupt the washing programme at  
any time open the door and press this button again.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using your appliance  
Loading your appliance  
Before placing dishes in the machine, remove any scraps of  
food, to avoid clogging the filters and consequently reducing  
the performance.  
Do not load very small items which can fall  
through the baskets.  
UI49  
The lower basket  
The lower basket is designed to take saucepans, lids,  
plates, salad bowls, cutlery etc.  
Serving dishes and large lids should be arranged around the  
edge of the basket, ensuring that the upper spray arm can  
turn freely.  
UI19  
The cutlery basket  
Long bladed knives stored in an upright position  
are a potential hazard.  
Long and/or sharp items of cutlery such as  
carving knives must be positioned horizontally in  
the upper basket.  
Take care when loading or unloading sharp items  
such as knives.  
Cutlery should be placed in the removable cutlery basket  
with the handles facing downwards.  
If the handles protrude from the bottom of the basket,  
obstructing the lower spray arm, load the cutlery with the  
handles facing upwards.  
Mix spoons with other cutlery to prevent them from sticking  
together.  
UI04  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The upper basket  
The upper basket is designed for plates (dessert plates,  
saucers, dinner plates of up to 25 cm in diameter), salad  
bowls, cups and glasses.  
Arrange items on and underneath the cup rack so that water  
can reach all surfaces.  
Light items (plastic bowls etc.) should be loaded in the upper  
basket and arranged so they do not move.  
US64  
In case that plates are loaded in the upper  
basket:  
load them starting from the rear positions of the basket;  
tilting them slightly forwards and avoiding the front positions  
near the door.  
Before closing the door, ensure that the spray  
arms can rotate freely.  
US71  
Adjusting the height of the upper  
basket  
If washing very large plates (over 27 cm and up to 32 cm in  
diameter) you can load them in the lower basket after  
moving the upper basket to the higher position.  
A
To move to the higher position proceed as follows:  
1. Move the front runner stops (A) of the upper basket  
outwards and slide the basket out.  
2. Refit the basket in the higher position and replace the  
stops (A) in their original position.  
When the top basket is in the higher position it  
will only take plates up to 20 cm in diameter and  
you will not be able to use the raised cup racks.  
RC01  
After loading your machine always close the  
door, as an open door can be a hazard.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hints for test centres  
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser  
Test standard:  
EN 50242  
Reference programme:  
Load:  
Normal 65°C with prewash  
12 standard place settings  
position 5  
Rinse aid selector:  
Detergent dosage:  
25 g in the dispenser  
5 g on the dispenser lid  
US57  
UI49  
Arrangement  
upper basket  
Arrangement  
lower basket  
Technical specifications  
Dimensions  
Width  
Height  
Max depth  
59.6 cm  
81.8 - 87.8 cm  
55.5 cm  
Max depth with open door  
111.4 cm  
Electrical connection  
Motor rating during wash  
Power of heating element  
Overall power  
Voltage  
220/240 V - 50 Hz  
200 W  
2100 W  
2300 W  
Water supply pressure  
Minimum  
Maximum  
50 kPa (0.5 bar)  
800 kPa (8 bar)  
Capacity  
12 place settings  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Book  
- Before use  
- Maintenance  
- Installation  
DISHWASHER  
Contents  
Important safety information  
2
Before use  
Setting the water softener  
Filling with salt  
Filling with rinse aid and adjusting the dose  
Use of detergent  
3
3
4
5
6
Hints and tips  
7
Maintenance and cleaning  
Internal cleaning  
Cleaning the filters  
External cleaning  
Prolonged periods of non-operation  
Frost precautions  
8
8
8
8
8
8
8
Moving the machine  
Something not working  
9
Installation  
10  
10  
10  
11  
Water supply connections  
Water outlet connection  
Electrical connection  
Guide to use the instruction book  
Safety instructions  
1. 2. 3.  
Step by step  
Hints and tips  
Environmental information  
152981 19/2  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important safety information  
It is most important that this instruction book should be retained with the appliance for future reference. Should  
the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always  
ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the  
appliance and the relevant safety information.  
This information has been provided in the interest of your safety. You MUST read it carefully before installing or  
using the appliance.  
G
G
This product should be serviced by an authorised  
Service engineer, and only genuine spare parts  
should be used.  
Installation  
G
G
G
G
This appliance is heavy. Care should be taken when  
moving it.  
Under no circumstances should you attempt to repair  
the machine yourself. Repairs carried out by  
inexperienced persons may cause injury or serious  
malfunctioning. Contact your local Service Force  
Centre. Always insist on genuine spare parts.  
It is dangerous to alter the specifications or attempt to  
modify this product in any way.  
Care must be taken to ensure that the appliance does  
not stand on the electrical supply cable.  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
Conservation  
In the interest of the environment:  
G
Any plumbing work required to install this appliance  
should be carried out by a qualified plumber or  
competent person.  
G
G
Materials marked with the symbol  
are recyclable.  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your area  
for re-cycling this appliance.  
Child Safety  
G
G
When the appliance is to be scrapped, cut off the  
power supply cable and make the door closing device  
unusable to prevent young children from being  
trapped inside.  
G
This appliance is designed to be operated by adults.  
Children should not be allowed to tamper with the  
controls or play with the product.  
G
G
Keep all packaging well away from children.  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
Keep all detergents in a safe place out of children's  
reach.  
During Use  
G
Items that are contaminated by petrol, paint, steel or  
iron debris, corrosive, acidic or alkaline chemicals  
must not be washed in this dishwasher.  
G
Under no circumstances should you open the door  
whilst the appliance is in operation. Always turn off the  
appliance before opening the door.  
G
G
G
Only use detergent specifically designed for use in  
dishwashers.  
Long bladed knives stored in an upright position are  
a potential hazard.  
Long and/or sharp items of cutlery such as carving  
knives must be positioned horizontally in the upper  
basket.  
G
When finishing loading or unloading close the door, as  
an open door can be a hazard.  
G
G
Do not sit or stand on the open door.  
Isolate the appliance from the power supply and turn  
off the water supply after use.  
G
Care should be taken when cleaning the bottom door  
seal and hinge area as any exposed metal edges may  
cut if care is not taken.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before use  
Before using your dishwasher for the first  
time:  
1. Ensure that the electrical and water connections comply  
with the installation instructions  
2. Remove all packaging from inside the appliance  
3. Set the water softener  
4. Pour 1 litre of water inside the salt container and then fill  
with salt  
5. Fill the rinse aid dispenser.  
6. Run a "Rinse and Hold" programme.  
Water hardness  
French  
Clarke  
PPM  
Use of  
salt  
Level  
Setting the water softener  
degrees  
(Parts per  
Million)  
degrees  
(°TH)  
The dishwasher is equipped with a water softener designed  
to remove minerals and salts from the water supply, which  
would have a detrimental or adverse effect on the operation  
of the appliance.  
0
1
2
3
4
5
0 - 80  
0 - 6  
NO  
0 - 8  
81 - 200  
201 - 400  
401 - 600  
601 - 800  
801 - 900  
7 - 14  
YES  
YES  
YES  
YES  
YES  
9 - 20  
15 - 28  
29 - 42  
43 - 56  
57 - 63  
21 - 40  
41 - 60  
61 - 80  
81 - 90  
The higher the content of these salts, the harder your water  
is.  
Water hardness is measured in equivalent scales, Clarke,  
French degrees and PPM (parts per Million).  
The softener should be adjusted according to the hardness  
of the water in your area. Your local Water Authority can  
advise you on the hardness of the water in your area.  
If your water is level 0 it is already soft  
and therefore there is no need to use salt.  
In this case adjust the water softener on  
level 1 without using salt.  
The dishwasher is factory set at level 2.  
If this level is not suitable for your area the softener should  
be adjusted.  
To adjust the water softener  
With a screwdriver turn the selector on the upper front  
corner of the machine until the level required corresponds  
with the marker.  
5
1
AA05  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Filling with salt  
Attention!  
Only use salt specifically designed for use in  
dishwashers.  
All other types of salt not specifically designed  
for use in dishwasher, especially table salt, will  
damage the water softener.  
Only fill with salt just before starting a washing  
programme. This will prevent any grains of salt or  
salty water, which may have been spilled,  
remaining on the bottom of the machine, which  
may cause corrosion.  
SR15  
1. Unscrew the cap of the salt container.  
The salt container will require topping up periodically.  
According to the model, an indicator reminds you when  
filling with salt:  
A) The salt cap has a refill indicator window in the centre.  
A green float is clearly visible when there is salt inside  
the container, and almost disappears when the salt has  
finished reminding you to add salt.  
SR16  
2. Pour 1 litre of water inside the container  
(this is necessary only before filling with  
salt for the first time).  
SR11  
SR17  
B) A salt indicator light on the control panel will come on  
when the salt has finished.  
3. Using the funnel provided, pour in the salt  
until the container is full.  
The salt indicator light on the control panel can  
remain illuminated for 2-6 hours after the salt has  
been replenished, assuming the dishwasher  
remains switched on. If you are using salts that  
take longer to dissolve then this can take longer.  
The function of the machine is not affected..  
Do not worry if water over flows from the unit when filling  
with salt, this is quite normal.  
SR18  
4. Remove any trace of salt on the screw thread  
or on the gasket.  
SR19  
5. Screw on the cap tightly.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rinse aid  
Rinse aid is automatically added during the last rinse,  
ensuring thorough rinsing, and spot and streak free drying.  
The dispenser, which is positioned inside the door, holds  
about 110 ml of rinse aid, which is sufficient for 16 - 40  
dishwashing programmes, depending upon the dosage  
setting.  
Filling with rinse aid  
1. Open the container by turning the lid (A) anticlockwise.  
2. Add the rinse aid until the container is completely full.  
The indicator (B) will be completely dark.  
A
3. Top up the rinse aid when the indicator (B) becomes  
clear.  
BR01  
(Only for models with rinse aid indicator light)  
Top up with rinse aid when the rinse aid indicator light on  
the control panel illuminates.  
Ensure that the lid is closed after every refill.  
B
Do not put liquid detergent in the rinse aid compartment.  
Clean up any rinse aid spilt during filling with an absorbent  
cloth to avoid excess foaming during the next wash.  
5
4
6
1
BR03  
Adjusting the dose  
According to the finish and drying results obtained, adjust  
the dose of rinse aid by means of the 6 position selector (C)  
(position 1 minimum dosage, position 6 maximum dosage).  
Increase the dose if there are drops of water or lime spots  
on the dishes after washing.  
C
Reduce it if there are sticky whitish streaks on the dishes.  
m
1
BR02  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use of detergent  
Only use detergents specifically designed  
for use in dishwashers.  
We recommend the use of Finish detergents which are  
available in the following options:  
Min = 15 g  
Max = 30 g  
Finish Double Action Tablets. Each tablet has the exact  
amount of detergent required, simply place in the dispenser.  
D
Finish Powder recommended for every day use.  
Finish Liquid Gel ideal for every day use. As the gel is  
extra gentle is it recommended for fine bone china.  
M A X  
M I N  
If using powder detergents proceed as  
follows:  
DE17  
1. Open the dispenser lid by pulling the catch (D).  
2. Add the detergent according to the recommended  
quantity given in the "Washing programmes" chart  
(see "Instruction Book - Part 2").  
As all detergents are not the same, you should also  
consult the instructions on the packet.  
3. Always close the lid.  
4. If the programme has a prewash add a little amount of  
detergent over the lid of the dispenser. Follow the  
recommended quantity given in the "Washing  
programmes" chart (see "Instruction Book - Part 2").  
DE02  
If using detergent in tablets proceed as  
follows:  
1. For all programmes; place 1 tablet inside the detergent  
dispenser.  
2. Always close the lid.  
3. For all programmes with prewash; place a portion of a  
further tablet on the lid of the detergent dispenser.  
If your dishwasher has a SID dispenser and you require  
a prewash, put the extra detergent into the SID  
dispenser and not on the lid of the detergent dispenser.  
Insufficient quantities of detergent will produce  
poor washing results, whereas an excessive  
amount of detergent will not improve washing  
results and is also wasteful.  
Using no more than the correct amount also  
contributes to reducing pollution.  
Compact detergents with enzymes  
In these compact powders the environmentally unfriendly components have been replaced by natural enzymes and other  
more biodegradable substances.  
The enzymes deploy their full dirt dissolving power at a temperature as low as 50°C.  
By choosing the 50°C programmes (if available) you can therefore achieve the same cleaning results that would otherwise  
be achievable only with 65°C programmes and conventional detergents.  
These new compact powders are generally phosphate-free.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hints and tips  
To save energy  
Items not suitable for dishwashers  
Place dishes in the machine immediately after every meal  
and wait until the dishwasher is full before washing.  
The following items should not be washed in the  
dishwasher (unless they are sold as dishwasher  
proof):  
If necessary run the Rinse and Hold programme (see  
"Washing Programmes" chart) so that any food scraps do  
not become caked on the dishes while you are waiting to  
run the complete wash programme.  
- Cutlery with wooden or horn handles or glued parts  
- bronze cutlery  
- saucepans with wooden handles  
- aluminium ware  
Do not prewash dishes under running water.  
- crystal ware  
- leaded glass  
For best washing and drying results  
- plastic items  
Before loading, remove all scraps of food and soak very  
heavily soiled pots and pans.  
- antique or fine decorated china  
Certain types of decoration can discolour when washed in  
a dishwasher.  
Arrange saucepans, cups and glasses etc. upside-down.  
Tilt items with convex or concave surfaces so that the  
water drains off easily.  
Crystal-ware and plastic objects, if not guaranteed  
dishwasher proof should be washed by hand.  
Avoid contact between the dishes as far as possible.  
Certain types of glass can also become opaque after  
being washed several times in a dishwasher.  
A chemical reaction can occur between silver cutlery and  
stainless steel cutlery. As a precaution, do not wash  
together.  
Iron and cast iron objects can rust and stain other items.  
Aluminium tends to go black, copper, pewter and brass  
tend to stain.  
If in doubt check with manufacturer of the item.  
When buying new dishes, ensure that they are  
dishwasher proof.  
For best results we recommend the use of Finish detergents, rinse aid and salt.  
P OURING  
PACK  
W
N E  
E
ION  
T
C
L
A
UB  
DO  
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT  
DE15  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and cleaning  
Internal cleaning  
Ensure that the seals around the door, the detergent and  
rinse aid dispensers are cleaned regularly with a damp cloth.  
We recommend the use of Finish Dishwasher Cleaner  
every 3 months or run a 65°C wash without dishes using  
detergent. Regular use of Finish Dishwasher Cleaner  
cleans inaccessible parts, eliminates unpleasant food  
odours and helps prevent the build-up of limescale.  
Cleaning the central filter  
(After each wash)  
Scraps of food may accumulate in the drain filter (A) and  
should be removed by rinsing the filter under running water.  
To remove the drain filter  
- simply pull it out by the handle.  
A
Once cleaned, refit the filter by pushing it back to its original  
MA04  
MA19  
position until it engages.  
Cleaning the large filter  
(Every week)  
If necessary clean the large filter (B) on both sides under  
running water, using a brush.  
90°  
B
To remove the large filter  
1. Remove the spray arm by pulling it upwards on one side.  
C
MA20  
2. Turn the column (C) anticlockwise by 90° and then slide  
MA05  
out the filter.  
3. Once cleaned refit it following the above instructions in  
reverse order.  
4. Ensure the filter is in its original position, the handle of  
the drain filter should be pointing towards the front of the  
appliance.  
The dishwasher must not be used without  
filters.  
MA21  
MA18  
Incorrect repositioning and fitting of the  
filters will produce poor washing results.  
Cleaning the filters is vital to ensure correct  
operation of the machine.  
External cleaning  
Frost precautions  
Clean the external surfaces of the machine and control  
panel with a damp soft cloth. If necessary use only neutral  
detergents. Never use abrasive products, scouring pads or  
solvent (acetone, trichloroethylene etc....).  
Avoid placing the machine in a location where the  
temperature is below 0°C. If this is unavoidable, empty the  
machine, close the appliance door, disconnect the water  
inlet pipe and empty it.  
Prolonged periods of non-operation  
If you are not using the machine for any period of time you  
are advised to:  
Moving the machine  
If you have to move the machine (moving house etc....):  
1. Unplug it.  
1. Unplug the appliance and then turn off the water.  
2. Turn the water tap off.  
2. Fill the rinse aid dispenser.  
3. Remove the water inlet and discharge hoses.  
4. Pull the machine out together with the hoses.  
Avoid over tilting the machine during transportation.  
3. Leave the door ajar to prevent the formation of any  
unpleasant smells.  
4. Leave the inside of the machine clean.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Something not working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an  
engineer.  
Before contacting your local Service Force Centre, please carry out the checks listed below.  
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a  
charge will be made even if the appliance is in guarantee.  
Symptom  
Solution  
The machine will not start  
G The door has not been properly closed.  
G The plug is not properly inserted in the power socket.  
G There is a power failure.  
The machine does not fill with water  
G Ensure the water tap is open.  
G Ensure the mains water supply has not been cut off.  
G The inlet hose may be squashed or bent. Reposition the hose.  
G The inlet hose may be blocked. Switch off the water supply and clean  
the filter.  
The filters are blocked  
G Clean the filters (refer to "Maintenance and cleaning").  
The spray arms are not rotating  
The dishwasher will not drain  
G Ensure the crockery is loaded correctly.  
G The drain hose may be squashed or bent. Reposition the hose.  
G The sink may be blocked. Clear any blockages.  
G The drain hose extension is not correct. Follow the instructions for  
connecting to the waste.  
G There is no vent in the end of the drain hose.  
The machine is noisy  
G Dishes are rattling against each other, refer to “Loading your machine”.  
G The spray arms are knocking against the dishes. Refer to  
"Loading your machine".  
The door is difficult to close  
G The dishwasher is not level, or not properly built-in.  
Visible lime deposits or white film  
on the dishes  
G Check that there is salt and that the salt cap is tight.  
G Check that the right level of the water softener is set.  
The dishes are not quite dry  
G The rinse aid has run out or too little is being used.  
The dishes are not clean (poor wash)  
G The baskets are too full.  
G The dishes have not been arranged properly.  
G The spray arms do not rotate  
G The spray arms are clogged.  
G The filters are clogged.  
G The filters are not in the correct position.  
G Not enough detergent has been used or it is unsuitable.  
G The detergent is old or has gone hard.  
G The salt container cap is not properly closed.  
G The washing programme selected is too gentle.  
If after all these checks, the problem persists, contact  
your local Service Force Centre, quoting the model and  
serial number. This information can be found on the  
rating plate located on the right hand side of the  
dishwasher door.  
This product should be serviced by an  
authorised Service engineer, and only  
genuine spare parts should be used.  
Under no circumstances should you attempt  
to repair the machine yourself.  
Prod.No. ........ Ser. No. .........  
Mod. ........  
RA01  
Repairs carried out by inexperienced persons  
may cause injury or serious malfunctioning.  
Contact your local Service Force Centre.  
Always insist on genuine spare parts.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Remove all packaging before positioning the machine.  
If possible, position the machine next to a water tap and a  
drain.  
Levelling  
Good levelling is essential for correct closure and sealing of  
the door. When the appliance is correctly levelled, the door  
will not catch on the levelling spacers on either side of the  
cabinet. If the door does not close correctly, loosen or  
tighten the adjustable feet until the machine is perfectly  
level.  
IN06  
IN07  
Water supply connections  
This dishwasher must be plumbed into a cold water supply.  
The water pressure must be within the limits given in the  
"Technical specifications" (Instruction Book - Part 2).  
Your local Water Authority will advise you on the average  
mains pressure in your area.  
The dishwasher features fill and drain hoses which can be  
turned either to the left or the right to suit the installation.  
Do not use, for connection, old hoses which have been used  
in another appliance.  
The locknut must be correctly fitted to avoid water  
leaks.  
Avoid bends or kinks in the hose which could prevent or  
slow down the water supply.  
If the machine is connected to new pipes or pipes which  
have not been used for a long time, you should run the  
water for a few minutes before connecting the inlet hose.  
This will prevent deposits of sand or rust clogging the inlet  
hose.  
Water outlet hose connection  
The end of the drain hose can be connected in the following  
ways:  
1. To the sink outlet spigot, securing it if necessary with a  
clip.  
Attention!  
Our appliances are supplied with a with a  
security device to protect against the return of  
dirty water back into the machine.  
If the spigot of your sink has a "no return valve"  
incorporated this can prevent the correct  
draining of your dishwasher. We advise you  
therefore to remove it.  
2
1
3
2. Hooked over the edge of the sink using the special  
curved plastic guide (if provided).  
CS09  
3. To a stand pipe provided with vent-hole, minimum  
internal diameter 4 cm.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The waste connection must be at a height of between 30 cm  
(minimum) and 100 cm (maximum) from the bottom of the  
dishwasher.  
The drain hose can face either to the right or left of the  
dishwasher  
Ensure the hose is not bent or squashed as this could  
prevent or slow down the discharge of water.  
If you use a drain hose extension it must be no longer than 2  
metres and its internal diameter must be no smaller than the  
diameter of the hose provided.  
Likewise the internal diameter of the couplings used for  
connections to the waste outlet must be no smaller than the  
diameter of the hose provided.  
+ 2 m max  
CS10  
The sink plug must not be in place when the machine is  
draining as this could cause the water to siphon back into  
the machine.  
Electrical connection  
This appliance must be earthed.  
The manufacturer declines any responsibility  
should this safety measure not be observed.  
If the plug that is fitted to your appliance is not suitable for  
the socket, it must be cut off and the appropriate plug fitted.  
Important  
The wires on the mains lead are coloured in accordance  
with the following code:  
Green and Yellow -Earth  
Blue  
Brown  
-Neutral  
-Live  
If you fit your own plug, the colours of the wires in the mains  
lead of your appliance may not correspond with the  
markings identifying the terminals in your plug.  
Proceed as follows:  
1. Connect the Green and Yellow (earth) wire to the  
terminal in the plug which is marked with the letter "E" or  
CE03  
the earth symbol  
or coloured green and yellow.  
2. Connect the Blue (neutral) wire to the terminal in the  
plug which is marked with the letter "N" or coloured  
black.  
3. Connect the Brown (live) wire to the terminal in the plug  
which is marked with the letter "L" or coloured red.  
The plug moulded onto the lead incorporates a 13amp  
BSI362 fuse. Only ASTA or BSI fuses should be used.  
The plug must not be used if the fuse cover/carrier is lost.  
The cover/carrier is indicated by the coloured insert at the  
base of the product.  
A replacement cover/carrier must be obtained from your  
local Service Force Centre.  
This appliance complies with the following E.E.C.  
Directives:  
- 73/23 or 19.2.73 (Low Voltage Directive) and  
subsequent modifications;  
- 89/336 or 3.5.89 (Electromagnetic Compatibility  
Directive) and subsequent modifications.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tricity Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ  
Customer care telephone number...  
08705 950 950  
From the Electrolux Group. The world’s No.1 choice.  
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,  
cleaning and outdoor use. More than 55 million Electrolux Group products (such as  
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year  
to a value of approx. 14 billion USD in more than 150 countries around the world.  
©
Electrolux Household Appliances Limited 2001  
UK  
1 10/01  
152980 15/1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toshiba CRT Television 32A32 User Manual
Toshiba Printer CB 426 T3 User Manual
Toshiba Projector TDP S21 User Manual
Transition Networks Switch SMHB TR 16 User Manual
Troy Bilt IP Phone GXP280 User Manual
Troy Bilt Trimmer 52066 User Manual
Uniden Cordless Telephone 9610 User Manual
Victory Refrigeration Refrigerator VBC 35 User Manual
Vizio Flat Panel Television E221A1 User Manual
VTech Graphics Tablet innotab User Manual