Tricity Bendix Dishwasher BDW 53 User Manual

INSTRUCTION BOOK  
Dishwasher  
BDW 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The control panel  
1. MAINSON indicator light  
2. On/Off push button  
3. Programme guide  
4. Door handle  
7. Programme sequence indicator  
As the programme progresses, the programme  
selector dial turns, to show the phase in the wash  
programme the appliance has reached.  
Prewash / Rinse and hold  
Wash  
Cold rinse  
Hot rinse  
Drying  
5. Programme marker  
6. Programme selector dial  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing programmes  
Cycle description  
Programme  
Degree of soil  
and  
type of load  
Starting  
position of  
the programme  
selector  
Require  
push  
button  
Recommended  
quantity of  
detergent  
wash  
prewash  
Any.  
RINSE  
&
HOLD  
1 cold rinse (to avoid  
food scraps from  
sticking together).  
Partial load (to be  
completed later in the  
day).  
/
/
1
2
On/Off  
On/Off  
Cold prewash  
Main wash up to 65°C  
2 cold rinses  
1 hot rinse  
Heavy soil.  
Crockery, cutlery, pots  
and pans.  
POWER  
WASH  
*
25 g  
5 g  
Drying  
Main wash up to 65°C  
2 cold rinses  
1 hot rinse  
NORMAL  
WASH  
Normal soil  
Crockery and cutlery  
3
4
30 g  
30 g  
/
/
On/Off  
On/Off  
Drying  
Main wash up to 65°C  
1 cold rinse  
1 hot rinse  
** QUICK  
Light soil.  
Crockery and cutlery.  
WASH  
Testing programme for EN 50242 (see "Hints for Test Centres").  
*
This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots)  
so that you may re-use them promptly.  
**  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating sequence  
1. Check the filters  
9. At the end of the washing  
programme  
Ensure they are clean and properly positioned  
See "Maintenance and cleaning" section.  
At the end of the programme the dishwasher will  
automatically stop.  
The “Mains On” indicator light remains on until the  
On/Off push button is depressed.  
2. Check that there is rinse aid and  
salt  
10. Switch off the dishwasher  
See "Before Use" section.  
Switch off the dishwasher by pressing the On/Off  
push button.  
Wait 15/20 minutes before opening the  
dishwashers’s door; in this way you will avoid  
burning yourself when removing the dishes and  
avoid also the damage of the nearby furniture  
caused by the escape of steam.  
3. Load the dishes  
Remove any scraps of food.  
Pull the lower basket out and arrange the  
saucepans, plates and cutlery in it.  
Pull the upper basket out and arrange the plates,  
saucers, glasses and cups etc. in it.  
Empty the lower basket first and then the upper one;  
this will avoid water dripping from the upper basket  
onto the dishes in the lower one.  
Slide the baskets back into the machine.  
When the washing programme has finished, it  
is recommended that the dishwasher is  
unplugged and the water tap turned off.  
4. Ensure that the spray arms can  
rotate freely.  
In general it is not advisable to open the door  
while the machine is working; if the door is  
opened however, a safety device ensures that  
the machine stops.  
5. Measure out detergent  
Add the required amount of detergent into the  
dispenser according to the "Washing programmes"  
chart.  
Close the detergent dispenser lid.  
Important!  
Care must be taken if the door is opened during  
the hot phase or immediately after a  
programme has finished, as steam may escape.  
6. Close the dishwasher door  
7. Set the programme  
Turn the programme selector dial clockwise until  
the programme marker on the knob  
corresponds with the number of the programme you  
wish to select.  
8. Start the programme  
Depress the On/Off push button.  
The "Mains On" indicator light will come on  
and the machine will start.  
If you wish to interrupt the washing programme at  
any time press this button again.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using your appliance  
Loading your appliance  
Before placing dishes in the machine, remove any scraps of  
food, to avoid clogging the filters and consequently reducing  
the performance.  
Do not load very small items which can fall  
through the baskets.  
UI49  
The lower basket  
The lower basket is designed to take saucepans, lids,  
plates, salad bowls, cutlery etc.  
Serving dishes and large lids should be arranged around the  
edge of the basket, ensuring that the upper spray arm can  
turn freely.  
UI19  
The cutlery basket  
Long bladed knives stored in an upright position  
are a potential hazard.  
Long and/or sharp items of cutlery such as  
carving knives must be positioned horizontally in  
the upper basket.  
Take care when loading or unloading sharp items  
such as knives.  
Cutlery should be placed in the removable cutlery basket  
with the handles facing downwards.  
If the handles protrude from the bottom of the basket,  
obstructing the lower spray arm, load the cutlery with the  
handles facing upwards.  
Mix spoons with other cutlery to prevent them from sticking  
together.  
For best results we recommend to use the cutlery grid  
provided (if the size and dimensions of the cutlery allow it).  
UI71  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
The upper basket  
The upper basket is designed for plates (dessert plates,  
saucers, dinner plates of up to 25 cm in diameter), salad  
bowls, cups and glasses.  
Arrange items so that water can reach all surfaces.  
Light items (plastic bowls etc.) should be loaded in the  
upper basket and arranged so they do not move.  
In case that plates are loaded in the  
upper basket:  
US64  
load them starting from the rear positions of the basket;  
tilting them slightly forwards and avoiding the front  
positions near the door.  
Before closing the door, ensure that the spray  
arms can rotate freely.  
US71  
Adjusting the height of the upper  
basket  
If washing very large plates (over 27 cm and up to 32 cm  
in diameter) you can load them in the lower basket after  
moving the upper basket to the higher position.  
A
To move to the higher position proceed as follows:  
1. Move the front runner stops (A) of the upper basket  
outwards and slide the basket out.  
2. Refit the basket in the higher position and replace the  
stops (A) in their original position.  
RC01  
When the top basket is in the higher position it  
will only take plates up to 20 cm in diameter  
and you will not be able to use the raised cup  
racks.  
After loading your machine always close the  
door, as an open door can be a hazard.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fitting under a counter  
(kitchen worktop or sink)  
By removing the machine’s worktop, you can install it  
under a close fitting sink unit or a pre-existing top,  
providing the dimensions of the recess correspond to  
those shown in the picture.  
Proceed as follows:  
-
Remove the machine’s worktop by unscrewing the  
two rear retaining screws, pull from the front and  
slide out the rear slots, lifting the worktop.  
600  
IN05  
Insert the machine after adjusting height and levelling with  
the adjustable feet. When inserting the machine, ensure  
that the water inlet and drain hoses are not kinked or  
squashed.  
Levelling  
Good levelling is essential for correct closure and sealing  
of the door.  
When the appliance is correctly levelled, the door will not  
catch on the levelling spacers on either side of the  
cabinet.  
If the door does not close correctly, loosen or tighten the  
adjustable feet until the machine is perfectly level.  
IN06  
IN07  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hints for test centres  
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser  
Test standard:  
EN 50242  
Reference programme:  
Load:  
POWER WASH  
12 standard place settings  
position 5  
Rinse aid selector:  
Detergent dosage:  
25 g in the dispenser  
5 g on the dispenser lid  
Arrangement upper basket  
Arrangement lower basket  
Arrangement cutlery basket  
Technical specifications  
Dimensions  
Width  
60 cm  
Height with worktop  
Height without worktop  
Max depth  
85 cm  
82 cm  
60 cm  
Max depth with open door  
115.2 cm  
Electrical connection  
Motor rating during wash  
Power of heating element  
Overall power  
Voltage  
220/240 V - 50 Hz  
200 W  
2100 W  
2300 W  
Water supply pressure  
Minimum  
Maximum  
50 kPa (0.5 bar)  
800 kPa (8 bar)  
Capacity  
12 place settings  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ  
Customer care telephone number...  
08705 950 950  
From the Electrolux Group. The world’s No.1 choice.  
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,  
cleaning and outdoor use. More than 55 million Electrolux Group products (such as  
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year  
to a value of approx. 14 billion USD in more than 150 countries around the world.  
©
Electrolux Household Appliances Limited 2001  
UK  
0 08/01  
152977 79/1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Book  
- Before use  
- Maintenance  
- Installation  
DISHWASHER  
Contents  
Important safety information  
2
Before use  
Setting the water softener  
Filling with salt  
Filling with rinse aid and adjusting the dose  
Use of detergent  
3
3
4
5
6
Hints and tips  
7
Maintenance and cleaning  
Internal cleaning  
Cleaning the filters  
External cleaning  
Prolonged periods of non-operation  
Frost precautions  
8
8
8
8
8
8
8
Moving the machine  
Something not working  
9
Installation  
10  
10  
10  
11  
Water supply connections  
Water outlet connection  
Electrical connection  
Guide to use the instruction book  
Safety instructions  
1. 2. 3.  
Step by step  
Hints and tips  
Environmental information  
152981 19/2  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important safety information  
It is most important that this instruction book should be retained with the appliance for future reference. Should  
the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always  
ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the  
appliance and the relevant safety information.  
This information has been provided in the interest of your safety. You MUST read it carefully before installing or  
using the appliance.  
G
G
This product should be serviced by an authorised  
Service engineer, and only genuine spare parts  
should be used.  
Installation  
G
G
G
G
This appliance is heavy. Care should be taken when  
moving it.  
Under no circumstances should you attempt to repair  
the machine yourself. Repairs carried out by  
inexperienced persons may cause injury or serious  
malfunctioning. Contact your local Service Force  
Centre. Always insist on genuine spare parts.  
It is dangerous to alter the specifications or attempt to  
modify this product in any way.  
Care must be taken to ensure that the appliance does  
not stand on the electrical supply cable.  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
Conservation  
In the interest of the environment:  
G
Any plumbing work required to install this appliance  
should be carried out by a qualified plumber or  
competent person.  
G
G
Materials marked with the symbol  
are recyclable.  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your area  
for re-cycling this appliance.  
Child Safety  
G
G
When the appliance is to be scrapped, cut off the  
power supply cable and make the door closing device  
unusable to prevent young children from being  
trapped inside.  
G
This appliance is designed to be operated by adults.  
Children should not be allowed to tamper with the  
controls or play with the product.  
G
G
Keep all packaging well away from children.  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
Keep all detergents in a safe place out of children's  
reach.  
During Use  
G
Items that are contaminated by petrol, paint, steel or  
iron debris, corrosive, acidic or alkaline chemicals  
must not be washed in this dishwasher.  
G
Under no circumstances should you open the door  
whilst the appliance is in operation. Always turn off the  
appliance before opening the door.  
G
G
G
Only use detergent specifically designed for use in  
dishwashers.  
Long bladed knives stored in an upright position are  
a potential hazard.  
Long and/or sharp items of cutlery such as carving  
knives must be positioned horizontally in the upper  
basket.  
G
When finishing loading or unloading close the door, as  
an open door can be a hazard.  
G
G
Do not sit or stand on the open door.  
Isolate the appliance from the power supply and turn  
off the water supply after use.  
G
Care should be taken when cleaning the bottom door  
seal and hinge area as any exposed metal edges may  
cut if care is not taken.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before use  
Before using your dishwasher for the first  
time:  
1. Ensure that the electrical and water connections comply  
with the installation instructions  
2. Remove all packaging from inside the appliance  
3. Set the water softener  
4. Pour 1 litre of water inside the salt container and then fill  
with salt  
5. Fill the rinse aid dispenser.  
6. Run a "Rinse and Hold" programme.  
Water hardness  
French  
Clarke  
PPM  
Use of  
salt  
Level  
Setting the water softener  
degrees  
(Parts per  
Million)  
degrees  
(°TH)  
The dishwasher is equipped with a water softener designed  
to remove minerals and salts from the water supply, which  
would have a detrimental or adverse effect on the operation  
of the appliance.  
0
1
2
3
4
5
0 - 80  
0 - 6  
NO  
0 - 8  
81 - 200  
201 - 400  
401 - 600  
601 - 800  
801 - 900  
7 - 14  
YES  
YES  
YES  
YES  
YES  
9 - 20  
15 - 28  
29 - 42  
43 - 56  
57 - 63  
21 - 40  
41 - 60  
61 - 80  
81 - 90  
The higher the content of these salts, the harder your water  
is.  
Water hardness is measured in equivalent scales, Clarke,  
French degrees and PPM (parts per Million).  
The softener should be adjusted according to the hardness  
of the water in your area. Your local Water Authority can  
advise you on the hardness of the water in your area.  
If your water is level 0 it is already soft  
and therefore there is no need to use salt.  
In this case adjust the water softener on  
level 1 without using salt.  
The dishwasher is factory set at level 2.  
If this level is not suitable for your area the softener should  
be adjusted.  
To adjust the water softener  
With a screwdriver turn the selector on the upper front  
corner of the machine until the level required corresponds  
with the marker.  
5
1
AA05  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Filling with salt  
Attention!  
Only use salt specifically designed for use in  
dishwashers.  
All other types of salt not specifically designed  
for use in dishwasher, especially table salt, will  
damage the water softener.  
Only fill with salt just before starting a washing  
programme. This will prevent any grains of salt or  
salty water, which may have been spilled,  
remaining on the bottom of the machine, which  
may cause corrosion.  
SR15  
1. Unscrew the cap of the salt container.  
The salt container will require topping up periodically.  
According to the model, an indicator reminds you when  
filling with salt:  
A) The salt cap has a refill indicator window in the centre.  
A green float is clearly visible when there is salt inside  
the container, and almost disappears when the salt has  
finished reminding you to add salt.  
SR16  
2. Pour 1 litre of water inside the container  
(this is necessary only before filling with  
salt for the first time).  
SR11  
SR17  
B) A salt indicator light on the control panel will come on  
when the salt has finished.  
3. Using the funnel provided, pour in the salt  
until the container is full.  
The salt indicator light on the control panel can  
remain illuminated for 2-6 hours after the salt has  
been replenished, assuming the dishwasher  
remains switched on. If you are using salts that  
take longer to dissolve then this can take longer.  
The function of the machine is not affected..  
Do not worry if water over flows from the unit when filling  
with salt, this is quite normal.  
SR18  
4. Remove any trace of salt on the screw thread  
or on the gasket.  
SR19  
5. Screw on the cap tightly.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rinse aid  
Rinse aid is automatically added during the last rinse,  
ensuring thorough rinsing, and spot and streak free drying.  
The dispenser, which is positioned inside the door, holds  
about 110 ml of rinse aid, which is sufficient for 16 - 40  
dishwashing programmes, depending upon the dosage  
setting.  
Filling with rinse aid  
1. Open the container by turning the lid (A) anticlockwise.  
2. Add the rinse aid until the container is completely full.  
The indicator (B) will be completely dark.  
A
3. Top up the rinse aid when the indicator (B) becomes  
clear.  
BR01  
(Only for models with rinse aid indicator light)  
Top up with rinse aid when the rinse aid indicator light on  
the control panel illuminates.  
Ensure that the lid is closed after every refill.  
B
Do not put liquid detergent in the rinse aid compartment.  
Clean up any rinse aid spilt during filling with an absorbent  
cloth to avoid excess foaming during the next wash.  
5
4
6
1
BR03  
Adjusting the dose  
According to the finish and drying results obtained, adjust  
the dose of rinse aid by means of the 6 position selector (C)  
(position 1 minimum dosage, position 6 maximum dosage).  
Increase the dose if there are drops of water or lime spots  
on the dishes after washing.  
C
Reduce it if there are sticky whitish streaks on the dishes.  
m
1
BR02  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use of detergent  
Only use detergents specifically designed  
for use in dishwashers.  
We recommend the use of Finish detergents which are  
available in the following options:  
Min = 15 g  
Max = 30 g  
Finish Double Action Tablets. Each tablet has the exact  
amount of detergent required, simply place in the dispenser.  
D
Finish Powder recommended for every day use.  
Finish Liquid Gel ideal for every day use. As the gel is  
extra gentle is it recommended for fine bone china.  
M A X  
M I N  
If using powder detergents proceed as  
follows:  
DE17  
1. Open the dispenser lid by pulling the catch (D).  
2. Add the detergent according to the recommended  
quantity given in the "Washing programmes" chart.  
As all detergents are not the same, you should also  
consult the instructions on the packet.  
3. Always close the lid.  
4. If the programme has a prewash add a little amount of  
detergent over the lid of the dispenser. Follow the  
recommended quantity given in the "Washing  
programmes" chart.  
DE02  
If using detergent in tablets proceed as  
follows:  
1. For all programmes; place 1 tablet inside the detergent  
dispenser.  
2. Always close the lid.  
3. For all programmes with prewash; place a portion of a  
further tablet on the lid of the detergent dispenser.  
If your dishwasher has a SID dispenser and you require  
a prewash, put the extra detergent into the SID  
dispenser and not on the lid of the detergent dispenser.  
Insufficient quantities of detergent will produce  
poor washing results, whereas an excessive  
amount of detergent will not improve washing  
results and is also wasteful.  
Using no more than the correct amount also  
contributes to reducing pollution.  
Compact detergents with enzymes  
In these compact powders the environmentally unfriendly components have been replaced by natural enzymes and other  
more biodegradable substances.  
The enzymes deploy their full dirt dissolving power at a temperature as low as 50°C.  
By choosing the 50°C programmes (if available) you can therefore achieve the same cleaning results that would otherwise  
be achievable only with 65°C programmes and conventional detergents.  
These new compact powders are generally phosphate-free.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hints and tips  
To save energy  
Items not suitable for dishwashers  
Place dishes in the machine immediately after every meal  
and wait until the dishwasher is full before washing.  
The following items should not be washed in the  
dishwasher (unless they are sold as dishwasher  
proof):  
If necessary run the Rinse and Hold programme (see  
"Washing Programmes" chart) so that any food scraps do  
not become caked on the dishes while you are waiting to  
run the complete wash programme.  
- Cutlery with wooden or horn handles or glued parts  
- bronze cutlery  
- saucepans with wooden handles  
- aluminium ware  
Do not prewash dishes under running water.  
- crystal ware  
- leaded glass  
For best washing and drying results  
- plastic items  
Before loading, remove all scraps of food and soak very  
heavily soiled pots and pans.  
- antique or fine decorated china  
Certain types of decoration can discolour when washed in  
a dishwasher.  
Arrange saucepans, cups and glasses etc. upside-down.  
Tilt items with convex or concave surfaces so that the  
water drains off easily.  
Crystal-ware and plastic objects, if not guaranteed  
dishwasher proof should be washed by hand.  
Avoid contact between the dishes as far as possible.  
Certain types of glass can also become opaque after  
being washed several times in a dishwasher.  
A chemical reaction can occur between silver cutlery and  
stainless steel cutlery. As a precaution, do not wash  
together.  
Iron and cast iron objects can rust and stain other items.  
Aluminium tends to go black, copper, pewter and brass  
tend to stain.  
If in doubt check with manufacturer of the item.  
When buying new dishes, ensure that they are  
dishwasher proof.  
For best results we recommend the use of Finish detergents, rinse aid and salt.  
P OURING  
PACK  
W
N E  
E
ION  
T
C
L
A
UB  
DO  
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT  
DE15  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and cleaning  
Internal cleaning  
Ensure that the seals around the door, the detergent and  
rinse aid dispensers are cleaned regularly with a damp cloth.  
We recommend the use of Finish Dishwasher Cleaner  
every 3 months or run a 65°C wash without dishes using  
detergent. Regular use of Finish Dishwasher Cleaner  
cleans inaccessible parts, eliminates unpleasant food  
odours and helps prevent the build-up of limescale.  
Cleaning the central filter  
(After each wash)  
Scraps of food may accumulate in the drain filter (A) and  
should be removed by rinsing the filter under running water.  
To remove the drain filter  
- simply pull it out by the handle.  
A
Once cleaned, refit the filter by pushing it back to its original  
MA04  
MA19  
position until it engages.  
Cleaning the large filter  
(Every week)  
If necessary clean the large filter (B) on both sides under  
running water, using a brush.  
90°  
B
To remove the large filter  
1. Remove the spray arm by pulling it upwards on one side.  
C
MA20  
2. Turn the column (C) anticlockwise by 90° and then slide  
MA05  
out the filter.  
3. Once cleaned refit it following the above instructions in  
reverse order.  
4. Ensure the filter is in its original position, the handle of  
the drain filter should be pointing towards the front of the  
appliance.  
The dishwasher must not be used without  
filters.  
MA21  
MA18  
Incorrect repositioning and fitting of the  
filters will produce poor washing results.  
Cleaning the filters is vital to ensure correct  
operation of the machine.  
External cleaning  
Frost precautions  
Clean the external surfaces of the machine and control  
panel with a damp soft cloth. If necessary use only neutral  
detergents. Never use abrasive products, scouring pads or  
solvent (acetone, trichloroethylene etc....).  
Avoid placing the machine in a location where the  
temperature is below 0°C. If this is unavoidable, empty the  
machine, close the appliance door, disconnect the water  
inlet pipe and empty it.  
Prolonged periods of non-operation  
If you are not using the machine for any period of time you  
are advised to:  
Moving the machine  
If you have to move the machine (moving house etc....):  
1. Unplug it.  
1. Unplug the appliance and then turn off the water.  
2. Turn the water tap off.  
2. Fill the rinse aid dispenser.  
3. Remove the water inlet and discharge hoses.  
4. Pull the machine out together with the hoses.  
Avoid over tilting the machine during transportation.  
3. Leave the door ajar to prevent the formation of any  
unpleasant smells.  
4. Leave the inside of the machine clean.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Something not working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an  
engineer.  
Before contacting your local Service Force Centre, please carry out the checks listed below.  
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a  
charge will be made even if the appliance is in guarantee.  
Symptom  
Solution  
The machine will not start  
G The door has not been properly closed.  
G The plug is not properly inserted in the power socket.  
G There is a power failure.  
The machine does not fill with water  
G Ensure the water tap is open.  
G Ensure the mains water supply has not been cut off.  
G The inlet hose may be squashed or bent. Reposition the hose.  
G The inlet hose may be blocked. Switch off the water supply and clean  
the filter.  
The filters are blocked  
G Clean the filters (refer to "Maintenance and cleaning").  
The spray arms are not rotating  
The dishwasher will not drain  
G Ensure the crockery is loaded correctly.  
G The drain hose may be squashed or bent. Reposition the hose.  
G The sink may be blocked. Clear any blockages.  
G The drain hose extension is not correct. Follow the instructions for  
connecting to the waste.  
G There is no vent in the end of the drain hose.  
The machine is noisy  
G Dishes are rattling against each other, refer to “Loading your machine”.  
G The spray arms are knocking against the dishes. Refer to  
"Loading your machine".  
The door is difficult to close  
G The dishwasher is not level, or not properly built-in.  
Visible lime deposits or white film  
on the dishes  
G Check that there is salt and that the salt cap is tight.  
G Check that the right level of the water softener is set.  
The dishes are not quite dry  
G The rinse aid has run out or too little is being used.  
The dishes are not clean (poor wash)  
G The baskets are too full.  
G The dishes have not been arranged properly.  
G The spray arms do not rotate  
G The spray arms are clogged.  
G The filters are clogged.  
G The filters are not in the correct position.  
G Not enough detergent has been used or it is unsuitable.  
G The detergent is old or has gone hard.  
G The salt container cap is not properly closed.  
G The washing programme selected is too gentle.  
If after all these checks, the problem persists, contact  
your local Service Force Centre, quoting the model and  
serial number. This information can be found on the  
rating plate located on the right hand side of the  
dishwasher door.  
This product should be serviced by an  
authorised Service engineer, and only  
genuine spare parts should be used.  
Under no circumstances should you attempt  
to repair the machine yourself.  
Prod.No. ........ Ser. No. .........  
Mod. ........  
RA01  
Repairs carried out by inexperienced persons  
may cause injury or serious malfunctioning.  
Contact your local Service Force Centre.  
Always insist on genuine spare parts.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Remove all packaging before positioning the machine.  
If possible, position the machine next to a water tap and a  
drain.  
Levelling  
Good levelling is essential for correct closure and sealing of  
the door. When the appliance is correctly levelled, the door  
will not catch on the levelling spacers on either side of the  
cabinet. If the door does not close correctly, loosen or  
tighten the adjustable feet until the machine is perfectly  
level.  
IN06  
IN07  
Water supply connections  
This dishwasher must be plumbed into a cold water supply.  
The water pressure must be within the limits given in the  
"Technical specifications" section.  
Your local Water Authority will advise you on the average  
mains pressure in your area.  
The dishwasher features fill and drain hoses which can be  
turned either to the left or the right to suit the installation.  
Do not use, for connection, old hoses which have been used  
in another appliance.  
The locknut must be correctly fitted to avoid water  
leaks.  
Avoid bends or kinks in the hose which could prevent or  
slow down the water supply.  
If the machine is connected to new pipes or pipes which  
have not been used for a long time, you should run the  
water for a few minutes before connecting the inlet hose.  
This will prevent deposits of sand or rust clogging the inlet  
hose.  
Water outlet hose connection  
The end of the drain hose can be connected in the following  
ways:  
1. To the sink outlet spigot, securing it if necessary with a  
clip.  
Attention!  
Our appliances are supplied with a with a  
security device to protect against the return of  
dirty water back into the machine.  
If the spigot of your sink has a "no return valve"  
incorporated this can prevent the correct  
draining of your dishwasher. We advise you  
therefore to remove it.  
2
1
3
2. Hooked over the edge of the sink using the special  
curved plastic guide (if provided).  
CS09  
3. To a stand pipe provided with vent-hole, minimum  
internal diameter 4 cm.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The waste connection must be at a height of between 30 cm  
(minimum) and 100 cm (maximum) from the bottom of the  
dishwasher.  
The drain hose can face either to the right or left of the  
dishwasher  
Ensure the hose is not bent or squashed as this could  
prevent or slow down the discharge of water.  
If you use a drain hose extension it must be no longer than 2  
metres and its internal diameter must be no smaller than the  
diameter of the hose provided.  
Likewise the internal diameter of the couplings used for  
connections to the waste outlet must be no smaller than the  
diameter of the hose provided.  
+ 2 m max  
CS10  
The sink plug must not be in place when the machine is  
draining as this could cause the water to siphon back into  
the machine.  
Electrical connection  
This appliance must be earthed.  
The manufacturer declines any responsibility  
should this safety measure not be observed.  
If the plug that is fitted to your appliance is not suitable for  
the socket, it must be cut off and the appropriate plug fitted.  
Important  
The wires on the mains lead are coloured in accordance  
with the following code:  
Green and Yellow -Earth  
Blue  
Brown  
-Neutral  
-Live  
If you fit your own plug, the colours of the wires in the mains  
lead of your appliance may not correspond with the  
markings identifying the terminals in your plug.  
Proceed as follows:  
1. Connect the Green and Yellow (earth) wire to the  
terminal in the plug which is marked with the letter "E" or  
CE03  
the earth symbol  
or coloured green and yellow.  
2. Connect the Blue (neutral) wire to the terminal in the  
plug which is marked with the letter "N" or coloured  
black.  
3. Connect the Brown (live) wire to the terminal in the plug  
which is marked with the letter "L" or coloured red.  
The plug moulded onto the lead incorporates a 13amp  
BSI362 fuse. Only ASTA or BSI fuses should be used.  
The plug must not be used if the fuse cover/carrier is lost.  
The cover/carrier is indicated by the coloured insert at the  
base of the product.  
A replacement cover/carrier must be obtained from your  
local Service Force Centre.  
This appliance complies with the following E.E.C.  
Directives:  
- 73/23 or 19.2.73 (Low Voltage Directive) and  
subsequent modifications;  
- 89/336 or 3.5.89 (Electromagnetic Compatibility  
Directive) and subsequent modifications.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service and spare parts  
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local  
Bendix Service Centre by telephoning:  
08705 929 929  
Your telephone call will be automatically routed to the Service Force centre covering your post code area. The addresses  
are listed on the following pages. Before calling out an engineer, please ensure you have read the details under the  
heading "Something Not Working".  
When you contact the Service Force Centre you will need to give the following details:  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of the fault  
4. The model and serial number (found on the rating plate)  
5. The purchase date  
Customer Care Department  
For general enquiries concerning your Bendix appliance or for further information on Bendix products please contact  
our Customer Care Department by letter or telephone at the address below.  
Customer Care Department  
Bendix  
55-77 High Street  
Slough  
Berkshire  
SL1 1DZ  
Tel: 08705 950 950 (*)  
calls to this number may be recorded for training purposes  
*
Download from Www.Somanuals.com. All Manuals Search And Download.  
To contact your local Service Force Centre telephone 08705 929 929  
ISLE OF LEWIS  
ND Macleod  
16 James Street  
Stornoway  
CHANNEL ISLANDS  
NORTH EAST  
GUERNSEY  
JERSEY  
Guernsey Electricity  
PO Box 4  
Vale, Guernsey  
Channel Islands GY1 3AD  
GATESHEAD  
GRIMSBY  
HULL  
Unit 356a  
Dukesway Court  
Dukesway  
Gateshead NE11 0BH  
Isle of Lewis PA87 2QW  
KELSO  
2, 6 & 8 Woodmarket  
Kelso  
Borders  
Jersey Electricity Company  
Haut De L’orme  
Rue De Haut De L’orme  
Trinity  
15 Hainton Avenue  
Grimsby  
N. E. Lincs  
DN32 9AS  
TD5 7AX  
Jersey  
ORKNEY  
PERTH  
7 King Street  
Kirkwall  
Orkney  
Unit 1  
Channel Islands JE3 5FG  
Boulevard Industrial Estate  
Hull  
HU3 4AY  
KW15 1JF  
SCOTLAND  
Scottish Hydro Electric  
Central Warehouse  
Inveralmond  
LEEDS  
64-66 Cross Gates Road  
Cross Gates  
Leeds  
ABERDEEN  
54 Claremont Street  
Aberdeen AB10 6RA  
(OWN SALES)  
SHETLAND  
Perth PH1 3AF  
LS15 7YS  
AUCHTERMUCHTY 33a Burnside  
Auchtermuchty  
3-4 Carlton Place  
NEWTON AYCLIFFE Unit 23  
Northfield Way  
Lerwick  
Shetland  
ZE1 0PW  
Fife KY14 7AJ  
Aycliffe Industrial Park  
Newton Aycliffe  
DL5 6EJ  
(OWN SALES)  
SHETLAND  
BLANTYRE  
Unit 5  
Block 2  
Bolts Shetland  
Auchenraith Ind. Estate  
Rosendale Way  
Blantyre G72 0NJ  
26 North Road  
Lerwick  
Shetland ZE1 0PE  
SHEFFIELD  
Pennine House  
Roman Ridge Road  
Sheffield  
(OWN SALES)  
WHALSAY  
DUMFRIES  
DUNOON  
93 Irish Street  
Dumfries  
DG1 2 PQ  
S9 1GB  
Leask Electrical  
Harisdale  
Symbister, Whalsay  
Shetland ZE2 9AA  
(OWN SALES)  
NORTH WEST  
7 Hill Street  
Dunoon  
Argyll  
BIRKENHEAD  
CARLISLE  
1 Kelvin Park  
PA23 7AL  
Dock Road  
Birkenhead  
CH41 1LT  
NORTHERN IRELAND  
EDINBURGH  
Unit 12  
BELFAST  
Owenmore House  
Kilwee Business Park  
Dunmurry  
Belfast  
BT17 0HD  
Unit 7  
Dumbryden Ind. Estate  
2 Dumbryden Road  
Edinburgh  
James Street Workshops  
James Street  
Carlisle  
EH14 2AB  
Cumbria  
CA2 5AH  
GLASGOW  
Unit 4  
Wellington Road  
Bishopriggs  
ISLE OF MAN  
BOLTON  
South Quay Ind. Estate  
Douglas  
Isle of Man  
IM1 5AT  
WALES  
Glasgow G64 2SA  
CARDIFF  
CLYWD  
DYFED  
Unit 4  
Guardian Industrial Estate  
Clydesmuir Road  
Cardiff  
INVERNESS  
Unit 3BI  
Smithton Ind. Estate  
Smithton  
Unit B  
Central Industrial Estate  
St Marks Street  
Bolton  
CF2 2QS  
Inverness IV2 7WL  
BL3 6NR  
Unit 6-7 Coed Parc  
ISLE OF ARRAN  
ISLE OF BARRA  
ISLES OF BUTE  
Arran Domestics  
The Douglas Centre  
Brodick  
Abergele Road  
Rhuddlan  
Clwyd  
PRESTON  
Unit 250  
Dawson Place  
Bamber Bridge  
Preston  
Isle of Arran KA27 8AJ  
LL18 5UG  
J Zerfah  
244 Bruernish  
Isle of Barra  
Western Islands HS9 5QY  
Lancashire PR5 8AL  
Unit 9  
St. Clears Business Park  
Tenby Road  
St. Clears  
Carmarthen  
SA33 4JW  
STOCKPORT  
Unit 20 Haigh Park  
Haigh Avenue  
Stockport  
Walker Engineering  
Glenmhor  
SK4 1QR  
Upper Serpentine Road  
Rothesay  
Isle of Bute PA20 9EH  
OSWESTRY  
Plas Ffynnon Warehouse  
Middleton Road  
Oswestry  
SY11 2PP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To contact your local Service Centre telephone 08705 929 929  
MIDLANDS  
LONDON & EAST ANGLIA  
SOUTH EAST  
BIRMINGHAM  
66 Birch Road East  
Wyrley Trading Estate  
Witton  
Birmingham  
B6 7DB  
BECKENHAM  
11a Gardner Ind. Estate  
Kent House Lane  
Beckenham  
ASHFORD  
FLEET  
Unit 2  
Bridge Road Business Centre  
Bridge Road  
Ashford  
Kent BR3 1QZ  
Kent TN23 1BB  
CHELMSFORD  
COLINDALE  
Hanbury Road  
BOURNE  
Pinfold Road  
Bourne  
PE10 9HT  
Widford Ind. Estate  
Chelmsford  
Essex  
Unit 1  
Redfields Ind. Estate  
Church Crookham  
Fleet  
CM12 3AE  
BRIDGNORTH  
68 St. Mary’s Street  
Hampshire GU13 0RD  
Unit 14  
Capitol Park  
Capitol Way  
Colindale  
London NW9 0EQ  
Bridgnorth  
Shropshire  
WV16 4DR  
HAYWARDS  
HEATH  
21-25 Bridge Road  
Haywards Heath  
Sussex RH16 1UA  
GLOUCESTER  
HEREFORD  
101 Rycroft Street  
Gloucester  
GL1 4NB  
ELTHAM  
194 Court Road  
Mottingham  
Eltham  
TONBRIDGE  
Unit 30  
Units 3 & 4  
Bank Buildings  
Cattle market  
Hareford  
Deacon Trading Estate  
Morley Road  
Tonbridge  
London SE9 4EW  
ENFIELD  
284 Alma Road  
Enfield  
TN9 1RA  
HE4 9HX  
London  
EN3 7BB  
HIGHAM FERRERS 30 High Street  
Higham Ferrers  
Northants  
NN10 8PL  
SOUTH WEST  
GRAVESEND  
Unit B4  
Imperial Business Estate  
West Mill  
Gravesend  
Kent  
DA11 0DL  
BARNSTAPLE  
Main Road  
Fremington  
Barnstaple  
North Devon EX31 2NT  
ILKESTON  
Unit 2  
Furnace Road  
Ilkeston DE7 5EP  
LEICESTER  
Unit 7  
IPSWICH  
Unit 6C  
BOURNEMOUTH 63-65 Curzon Road  
Oaks Industrial Estate  
Coventry Road  
Narborough  
Leicestershire  
LE9 5GF  
Elton Park Business Centre  
Hadleigh Road  
Ipswich  
Bournemouth  
Dorset  
BH1 4PW  
IP2 0DD  
BRIDGEWATER  
BRISTOL  
6 Herswell Business Park  
Salmon Parade  
Bridgwater  
LETCHWORTH  
LONDON  
16-17 Woodside Ind. Park  
LINCOLN  
Unit 8  
Works Road  
Letchworth  
Herts  
Clifton Street  
Stone Field Park  
Lincoln  
Somerset TA6 5PY  
SG6 1LA  
11 Eldon Way  
Eldonwall Trading Estate  
Bristol  
LN5 8LQ  
2 - 4 Royal Lane  
Yiewsley  
West Drayton  
Middlesex  
UB7 8DL  
NEWCASTLE  
UNDER LYME  
18-21 Croft Road  
Brampton Ind. Estate  
Newcastle under Lyme  
Staffordshire  
ST5 0TW  
BS4 3QQ  
EMSWORTH  
ISLE OF WIGHT  
266 Main Road  
Southbourne  
Emsworth  
MAIDENHEAD  
MOLESEY  
Reform Road  
PO10 8JL  
Maidenhead  
Berkshire  
SL6 8BY  
REDDITCH  
TAMWORTH  
13 Thornhill Road  
North Moons Moat  
Redditch  
Worcestershire  
B98 9ND  
Unit 8  
Enterprise Court  
Ryde Business Park  
Ryde  
10 Island Farm Avenue  
West Molesey  
Surrey  
Isle of Wight PO33 1DB  
Unit 3  
KT8 2UZ  
NEWTON ABBOT Unit 2  
Zealley Ind. Estate  
Sterling Park  
Claymore  
Tamworth  
B77 5DQ  
NEWBURY  
9 Pipers Court  
Berkshire Drive  
Thatcham  
Kingsteignton  
Newton Abbot  
TQ12 3TD  
Berkshire  
RG19 4ER  
WORCESTER  
Units 1 & 2  
REDRUTH  
Unit 7D  
Northbrooks Close  
Gregorys Mill Ind. Estate  
Worcester  
Pool Ind. Estate  
Druids Road  
Redruth  
NORWICH  
SUNBURY  
2b Trafalgar Street  
Norwich  
NR1 3HN  
WR3 8BP  
Cornwall TR15 3RH  
Unit 1a  
The Summit  
Hanworth Road  
Sunbury on Thames  
TW16 5DB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee conditions  
Standard guarantee conditions  
We,, Bendix, undertake that if within 12 months of the date of purchase this Bendix appliance or any part thereof is proved to  
be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE  
OF CHARGE for labour, materials or carriage on condition that:  
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.  
The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions.  
The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authorised by us.  
All service work under this guarantee must be undertaken by a Bendix Service Force Centre.  
Any appliance or defective part replaced shall become the Company’s property.  
This guarantee is in addition to your statutory and other legal rights.  
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which  
case a premium will be charged.  
Exclusions  
This guarantee does not cover:  
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts  
of glass or plastic.  
Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United  
Kingdom.  
Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.  
Products of Bendix manufacture which are not marketed by Bendix.  
European Guarantee  
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the  
following qualifications:  
The guarantee starts from the date you first purchased your product.  
The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this  
brand or range of products.  
This guarantee relates to you and cannot be transferred to another user.  
Your new home is within the European Community (EC) or European free Trade Area.  
The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.  
The product is installed taking into account regulations in your new country.  
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They  
will then ensure that the local service Organisation is aware of your move and able to look after you and your appliances.  
France  
Germany  
Italy  
Senlis  
+33 (0)3 44 62 28 28  
+49 (0)911 323 2600  
+39 (0)1678 47053  
+46 (0)20 78 77 50  
+44 (0)1753 219898  
Nurnberg  
Pordenone  
Stockholm  
Slough  
Sweden  
UK  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 07/01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taylor Scale TR250SS User Manual
TDK Network Card HHM Series HHM2208SB1 User Manual
Toastmaster Fryer TES1 User Manual
Toshiba Laptop U105 User Manual
Toshiba Laptop Z10T A1111 User Manual
Tripp Lite Universal Remote URM 15T User Manual
United States Stove Gas Heater B2045L User Manual
Viking Burner VGSC307 4BSS User Manual
Viking Convection Oven F20303 User Manual
Weed Eater Lawn Mower WE261 96022000703 User Manual