MIL-SW8T1GPA
8 Port 10/100/1000BASE-T with
1 Combo 1000BASE-X SFP Port
Web Managed Switch
User Guide
Rev.A0
19-May-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
INTRODUCTION .............................................................................. 3
Features...................................................................................................................3
Software Feature......................................................................................................4
Package Contents....................................................................................................5
HARDWARE DESCRIPTION........................................................... 7
Physical dimension ..................................................................................................7
Front Panel ..............................................................................................................7
Rear Panel...............................................................................................................8
LED Indicators..........................................................................................................9
Desktop Installation................................................................................................10
Attaching Rubber Pads...................................................................................10
Power On...............................................................................................................10
NETWORK APPLICATION............................................................ 12
Small Workgroup....................................................................................................12
Segment Bridge .....................................................................................................13
WEB-BASED MANAGEMENT....................................................... 15
About Web-based Management.............................................................................15
System Login .........................................................................................................15
System Configuration.............................................................................................16
Port Configuration ..................................................................................................18
Statistics Overview.................................................................................................19
Statistics Detail.......................................................................................................20
VLAN Setting..........................................................................................................20
VLAN Port Setting...........................................................................................21
Port Trunk ..............................................................................................................22
LACP Setting..........................................................................................................23
LACP Status ..........................................................................................................24
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Spanning Tree....................................................................................................... 25
RSTP System Configuration........................................................................... 25
RSTP Port Configuration................................................................................ 27
Spanning Tree Status............................................................................................ 27
802.1X Configuration............................................................................................. 28
Parameters Configuration............................................................................... 29
QoS Setting ........................................................................................................... 30
System Restart...................................................................................................... 33
Factory Default ...................................................................................................... 33
Firmware Upload ................................................................................................... 33
Configuration File Transfer .................................................................................... 34
TROUBLESHOOTING ................................................................... 35
Incorrect connections............................................................................................. 35
ꢀ
ꢀ
ꢀ
Faulty or loose cables ............................................................................. 35
Non-standard cables ............................................................................... 35
Improper Network Topologies ................................................................. 36
Diagnosing LED Indicators .................................................................................... 36
TECHNICAL SPECIFICATION ...................................................... 37
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The 8 10/100/1000T with 1 1000Base-X SFP/RJ45 Combo port Web Managed
Switch that can be used to build high-performance switched workgroup networks.
The switch is targeted at workgroup or department.
The 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web
Managed Switch features a Store-and-Forward Switching scheme that offers low
latency for high-speed networking and allows the switch to auto-learn and store
source address in a 8K-entry MAC address table.
The 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo Web Managed
Switch has 8 auto-sensing 10/100/1000 Base-TX RJ-45 ports with one auto detect
Giga SFP/RJ-45 Combo port that enables extended distance connection.
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Conform to IEEE 802.3, 802.3u, 802.3ab, 802.3x and 802.1x
Store-and-Forward switching architecture
True non-blocking switching
Web Management
Auto-MDIX on all ports
16Gbps back-plane
144Kbytes memory buffer
N-Way Auto-Negotiation
8K MAC address table
Back pressure with half duplex
Flow control with full duplex
Support Port Based VLAN
Support Port Trunk
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
VLAN
ꢁ
ꢁ
Port Based VLAN
IEEE 802.1Q VLANs. Up to 256 groups
ꢀ
ꢀ
ꢀ
ꢀ
Support DHCP client
Support Class of Service
Support Spanning Tree
9K Jumbo Frame support
Software Feature
Management
Web Management
Firmware update
Web UI firmware update
One default button for system default
Default IP: 192.168.1.77
System default
Port Trunk
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
IEEE802.3ad port trunk with link aggregation
control protocol (LACP)
The trunk group up to 2 and maximum trunk
port member up to 8 ports
Port Based VLAN
VLAN
DHCP
VLAN ID from 1 to 1095
VLAN group up to 255
DHCP client feature
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Port based
Quality of Service
Tag based
IPv4 Type of Service
Class of Service
Spanning Tree
Per port support 4 priority queues
IEEE802.1w rapid spanning tree and compatible
with IEEE 802.1d
Package Contents
Unpack the contents of the 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45
Combo Web-Smart Switch and verify them against the checklist below:
ꢀ 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo Web Managed
Switch
ꢀ Power Cord
ꢀ Four Rubber Pads
ꢀ User Manual
8 10/100/1000Base-T + 1 Giga Copper/Mini-GBIC
Web Managed Switch
Four Rubber Pads
Power Cord
User Manual
Package Contents
Compare the contents of your 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45
Combo port Web-Smart Switch package with the standard checklist above. If any
5
Download from Www.Somanuals.com. All Manuals Search And Download.
item is missing or damaged, please contact the local dealer for exchanging.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Description
This section mainly describes the hardware of the 8 10/100/1000Base-T with 1
1000Base-X SFP/RJ45 Combo port Web-Smart Switch and gives a physical and
functional overview on certain switch.
Physical dimension
The 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web
Managed Switch’s physical dimension is
(L x W x H).
217 x 140 x 43 mm
Front Panel
The front panel of the 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo
port Web-Smart Switch consists of the 7 10/100/1000Base-TX RJ-45 port, one auto
detect Giga Copper / Mini GBIC port , LED Indicators and reset button. Please refer
to the LED Indicator section for LED description.
ꢀ
Reset button:
ꢁ
ꢁ
Press the bottom for 3 seconds for system software restarting.
Restart:
Press 5 seconds for reset back to default value settings.
Reset to default:
The front panel of the 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web Managed
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch
ꢀ
7x 10/100/1000 N-way auto-sensing for
RJ-45 Ports (Auto MDI/MDIX):
10Base-T, 100Base-TX or 1000Base-T connections.
In general, means connecting to another Hub or Switch while
means
MDI
connecting to a workstation or PC. Therefore,
MDIX
would allow
Auto MDI/MDIX
connecting to another Switch or workstation without changing non-crossover or
crossover cabling.
ꢀ
SFP/RJ-45 combo port: The system will automatically detect which is Giga
UTP or Giga fiber. The Giga copper/Mini GBIC combo port is located on front
panel which is named as port 1 with 8 10/100/1000Base-TX ports. Giga fiber is
the mini GBIC slot that module is optional.
Disconnect the Giga copper connection before installing the Mini GBIC
[NOTE]
module. Otherwise, the switch couldn’t detect the Mini GBIC that has been
installed. While Giga copper port or Mini GBIC port is operating, only one of
them will operate.
Rear Panel
The 3-pronged power plug is located at the rear Panel of 8 10/100/1000Base-T with
1 1000Base-X SFP/RJ45 Combo port Web-Smart Switch. The switch will work with
AC voltage in the range of 100 to 240 volts / 50~60 Hz.
The Rear Panel of 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web Managed
Switch
8
Download from Www.Somanuals.com. All Manuals Search And Download.
LED Indicators
The LED Indicators display real-time information of systematic operation status. The
following table provides descriptions of LED status and their meaning.
LED Panel of 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web Managed Switch
LED
Status
On
Color
Green
--
Description
Power On
Power
No Power inputs or Power cord
disconnected
Off
The port is operating at the speed of
1000Mbps
On
Green
Orange
--
The port is operation at the speed of
100Mbps
On
1000M
In 10Mbps mode or no device
attached
Off
The port is successfully connecting
with the device
On
Green
Green
--
The port is receiving or transmitting
data
Blinks
Off
LNK /ACT
FDX /COL
No device attached
The port is operating in Full-duplex
mode
On
Orange
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Collision of Packets occurs in the
port
Blinks
Off
Orange
--
Half-duplex mode or no device
attached
The port is successfully connecting
with the device
On
Green
Green
--
The port is receiving or transmitting
data
LNK /ACT
(MINI GBIC)
Blinks
Off
No data transmitted or no device
connected
The Description of LED Indicators
Desktop Installation
Set the switch on a sufficiently large flat space with a power outlet nearby. The
surface where the switch locates should be clean, smooth, level and sturdy. Make
sure there is enough clearance around the switch to allow attachment of cables,
power cord and allow air circulation.
Attaching Rubber Pads
A. Make sure mounting surface on the bottom of the switch is grease and dust
free.
B. Remove adhesive backing from the Rubber Pads.
C. Apply the Rubber Pad to each corner on the bottom of the switch. These
footpads can prevent the switch from shock/vibration.
Power On
Connect the power adaptor to the power jag on the rear panel of the switch. The
10
Download from Www.Somanuals.com. All Manuals Search And Download.
other side of power adaptor connects to the power outlet. The external power supply
in the switch works with the AC power from 100 to 240V. Please check with the
power indicator on the front panel to see if power is properly supplied.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Application
This section provides user a few samples of network topology in which the switch is
used. In general, the 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo
port Web Managed Switch is designed as a segment switch. That is, with its
address table (8k MAC address) and high performance, it is ideal for
interconnecting networking segments.
PC, workstations, and servers can communicate each other by directly connecting
with 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web
Managed Switch. The switch automatically learns nodes address, which are
subsequently used to filter and forward all traffic based on the destination address.
By using Uplink port, the switch can connect with another switch or hub to
interconnect other small-switched workgroups to form a larger switched network.
Meanwhile, you can also use fiber ports to connect switches. The distance between
two switches via fiber cable depends on the type of fiber transceiver.
Small Workgroup
The 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web
Managed Switch can be used as a standalone switch to which personal computers,
server, printer server, are directly connect to form small workgroup.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Segment Bridge
For enterprise networks where large data broadcasts are constantly processed, this
switch is an ideal solution for department users to connect to the corporate
backbone.
Use two 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web
Managed Switch with PCs, print server, and local server attached, are both
connecting to the core switch. All the devices in this network can communicate with
each other through the core switch. Connecting servers to the 8 10/100/1000Base-T
with 1 1000Base-X SFP/RJ45 Combo port Web Managed Switch allows other users
to access the data on server. By using fiber ports to connect switches, the distance
between two switches depends on the type of fiber transceiver.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Web-Based Management
This section introduces the function configuration of the 8 10/100/1000Base-T with
1 1000Base-X SFP/RJ45 Combo port Web Managed Switch.
About Web-based Management
On the CPU board of the switch there is an embedded HTML web site residing in
flash memory, which offers advanced management features and allow users to
manage the switch from anywhere on the network through a standard browser such
as Microsoft Internet Explorer.
The Web-Based Management supports Internet Explorer 5.0. And, it is applied with
Java Applets for reducing network bandwidth consumption, enhance access speed
and present an easy viewing screen.
By default, IE5.0 or later version does not allow Java Applets to activate
[NOTE]
sockets. In fact, the user has to explicitly modify the browser setting to enable Java
Applets to operate network ports.
System Login
The default value is as below:
ꢀ
ꢀ
ꢀ
ꢀ
IP Address:
192.168.1.77
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.1.254
Password:
root
15
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Launch the Internet Explorer
SFP/RJ45 Combo port Web Managed Switch, and then press “
3. Login screen will appear right after
”
Enter
4. Key in the password(The default password is “
”)
root
5. And then, click Apply , and then configuration is ready to be set up
Main Interface
System Configuration
Display system parameters information as listed below, and the other parameters of
system can be configured as well.
ꢀ
MAC Address: The unique hardware address assigned by manufacturer
(default)
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
S/W Version: The Software Version of Kernel
H/W Version: The Hardware Version of Switch
Active IP Address: Current IP Address
Active Subnet Mask: Current IP Subnet Mask
Active Gateway: Current Gateway
DHCP Server: DHCP Server IP Address
Lease Time Left: The DHCP lease time. After 50% of the lease time has
passed, the client/switch will attempt to renew the lease with the original DHCP
server that it obtained the lease from using a DHCPREQUEST message. Any
16
Download from Www.Somanuals.com. All Manuals Search And Download.
time the client/switch boots and the lease is 50% or more passed, the
client/switch will attempt to renew the lease. At 87.5% of the lease completion,
the client/switch will attempt to contact any DHCP server for a new lease
System Configuration interface
ꢀ
ꢀ
To enable DHCP Client Function
DHCP Enable:
Assigning the switch IP address(The default IP is
Fallback IP Address:
192.168.1.77)
ꢀ
ꢀ
Assigning the switch IP Subnet Mask
Fallback Subnet Mask:
Assigning the switch Gateway(The default value is
Fallback Gateway:
192.168.1.254)
ꢀ
It is used for Remote Management Security; in fact, it can
Management VLAN:
17
Download from Www.Somanuals.com. All Manuals Search And Download.
remote management that include telnet, SNMP, and Web browse the switch
only when the port of VLAN group ID is equal to the Management VLAN ID
ꢀ
ꢀ
ꢀ
the name of the switch
Name:
Web GUI login password. The default password is root
Password:
The web connection timeout time
Inactivity Timeout:
ꢀ
ꢀ
And then, click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying
Port Configuration
Configure the port of status.
ꢀ
Display the current connection speed(1000FDX, 100FDX, 100HDX,
Link:
10FDX, 10HDX, Down)
ꢀ
ꢀ
Set the Auto Speed, 1000 Full mode of the port
Mode:
Set Flow Control function is “enable” or “disable” in Full Duplex
Flows control:
mode
ꢀ
The Maximum Frame Size that in Bytes fro frames
MaxFrame(1518 ~ 9600):
received on the port. Tagged frames are allowed to be 4 Bytes longer than the
Maximum Frame Size
ꢀ
ꢀ
And then, click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Port Configuration interface
Statistics Overview
The following information provides the current port statistic information
Clear
ꢀ
ꢀ
Press
button to clean all counts
And then, click Refresh to get the new setting information as below:
Statistics Overview interface
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Statistics Detail
The following information provides statistic detail information of statistic on each
port, and simply selecting the port to viewing the statistic information.
Clear
ꢀ
ꢀ
Press
button to clean all counts
And then, click Refresh to get the new setting information as below:
Statistics Detail interface
VLAN Setting
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain,
which would allows user to isolate network traffic so only the members of VLAN will
receive traffic from the same members of VLAN. Basically, creating a VLAN from a
switch is logically equivalent of reconnecting a group of network devices to another
Layer 2 switch. However, all the network devices are still plugged into the same
switch physically.
ꢀ
ꢀ
Assign the VLAN ID
Grouping the members of VLAN
ꢀ
ꢀ
Click Add All Port to add all of the ports into a VLAN entry.
Click Clear All Port to clear all of check box for canceling all the ports to be
added into a VLAN entry.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
And then, click Apply to bring up the configuration interface as below:
VLAN Setting interface
VLAN Port Setting
Click VLAN Port Setting to bring up the configuration interface for adjusting the
VID Setting
ꢀ
ꢀ
Enter the Port VLAN ID
PVID:
Awareness:
Enable the awareness that ports will strip the VLAN tag from
received frames and insert the tag in transmitted frames (PVID). Disable the
awareness that ports will not strip the tag from received frames or insert the tag
21
Download from Www.Somanuals.com. All Manuals Search And Download.
in transmitted frames
To set the outgoing frames
ꢀ
Frame Type:
ꢁ
ꢁ
Tagged: Outgoing frames with VLAN-Tagged
All: All type of frames
ꢀ
ꢀ
After that, click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying
VLAN Port Setting interface
Port Trunk
Port trunk allows multiple links to be bundled together and act as a single physical link
for increased throughput. It provides load balancing, and redundancy of links in a
switched inter-network. Actually, the link does not have an inherent total bandwidth
equal to the sum of its component physical links. Traffic in a trunk is distributed across
an individual link within the trunk in a deterministic method that called a hash algorithm.
Traffic pattern on the network should be considered carefully before you apply it. When
a proper hash algorithm is used, traffic is kind of randomly decided to be transmitted
across either link within the trunk and load balancing will be seen.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
ꢀ
Grouping the members of Trunk. Normal means the port is not trunk port
And then, click Apply to apply the configuration
ꢀ
Or, click Refresh to reset the configuration before applying
Port Trunk interface
LACP Setting
The Link Aggregation Control Protocol (LACP) provides a standardized means for
exchanging information between Partner Systems on a link to allow their Link
Aggregation Control instances to reach agreement on the identity of the Link
Aggregation Group to which the link belongs, move the link to that Link Aggregation
Group, and enable its transmission and reception functions in an orderly manner.
Link aggregation lets user group up to eight consecutive ports into a single
dedicated connection. This feature can expand bandwidth to a device on the
network.
more detail information
LACP operation requires full-duplex mode,
refers to IEEE 802.3ad.
ꢀ
ꢀ
To enable the LACP protocol of the port
Protocol Enable:
The LACP key determines which ports potentially can aggregate
Key Value:
together
ꢀ
And then, click Apply to apply the configuration
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Or, click Refresh to reset the configuration before applying
LACP Setting interface
LACP Status
When the LACP aggregator had been setup, the LACP status information will
display as below:
24
Download from Www.Somanuals.com. All Manuals Search And Download.
LACP Status interface
Spanning Tree
The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree
Protocol and provides for faster spanning tree convergence after a topology change.
The system also supports STP and the system will auto detect the connected
device that is running STP or RSTP protocol.
RSTP System Configuration
ꢀ
A value used to identify the root bridge. The bridge with the
System Priority:
25
Download from Www.Somanuals.com. All Manuals Search And Download.
lowest value has the highest priority and is selected as the root. If the value has
being changed, user has to reboot the switch. The value must be multiple of
4096 according to the protocol standard rule.
ꢀ
ꢀ
The scale of 1~10 sec will be set as a period of time that
Hello Time (1-10):
how often the switch broadcasts hello messages to other switches
The number of seconds (from 6~ 40) which determines the
Max Age (6-40):
amount of time that protocol information received on a port is stored by the
switch.
ꢀ
ꢀ
The number of seconds (from 4 ~ 30) which
Forward Delay Time (4-30):
determines how long each of the listening and learning states will last before
the port begins forwarding.
Select the RSTP default protocol. Normal means RSTP
Force version:
protocol. Compat is for compatibling with STP protocol.
RSTP Configuration interface
26
Download from Www.Somanuals.com. All Manuals Search And Download.
RSTP Port Configuration
ꢀ
ꢀ
To enable or disable the port protocol
Protocol Enable:
The port directly connected to end stations cannot create bridging loop
Edge:
in the network. To configure the port as an edge port, mark the port
The cost of the path to the other bridge from this transmitting bridge
ꢀ
Path Cost:
at the specified port. Enter a number 1 through 200000000
And then, click Apply to apply the configuration
ꢀ
ꢀ
Or, click Refresh to reset the configuration before applying
Spanning Tree Status
Click Refresh to get the newest configuration information. Also, the RSTP VLAN
Bridge information will display as below:
27
Download from Www.Somanuals.com. All Manuals Search And Download.
RSTP Status interface
802.1X Configuration
802.1x is an IEEE authentication specification that allows a client to connect to a
wireless access point or wired switch but prevents the client from gaining access to
the Internet until it provides credentials, like a user name and password that are
verified by a separate server.
ꢀ
ꢀ
ꢀ
To disable or enable 802.1x protocol
Mode:
Set the Radius Server IP address
RADIUS IP:
Set the UDP destination port for authentication requests to
RADIUS UDP Port:
the specified Radius Server
ꢀ
ꢀ
Set an encryption key for use during authentication sessions
RADIUS Secret:
with the specified radius server. This key must match the encryption key used
on the Radius Server
Select the state of port
Admin State:
ꢁ
ꢁ
ꢁ
The specified port is required to be held in the
The specified port is required to be held in the
Force Authorized:
unauthorized state
Force Unauthorized:
authorized state
The specified port is set to the authorized or unauthorized state in
Auto:
accordance with the outcome of an authentication exchange between the
Supplicant and the authentication server
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Restart authentication process for the port
Re-authenticate:
Restart a complete authentication process for the port
Force Reinitialize:
Click to view each port statistic
Statistics:
Restart authentication process for all the port
Re-authenticate All:
Force reinitialize All:
Restart a complete authentication process for the port
ꢀ
And then, click Apply to apply the configuration
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Or, click Refresh to reset the configuration before applying
802.1X Configuration interface
Parameters Configuration
ꢀ
To enable the re-authentication mode
Reauthentication Enable:
ꢀ
Set the period of time after
Reauthentication period (1~3600 seconds):
which clients connected must be re-authenticated
ꢀ
Set the period of time the switch waits for a
EPA Timeout (1~255 seconds):
supplicant response to an EAP request
ꢀ
ꢀ
And then, click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying
29
Download from Www.Somanuals.com. All Manuals Search And Download.
QoS Setting
Configuring QoS mode of the port and per port priority, TOS and COS priority
setting.
ꢀ
ꢀ
Select the QoS mode – port, DSCP, or vlantag
Mode:
Select the priority level – low, normal, medium, or high
Apply to apply the configuration
Port Priority:
ꢀ
ꢀ
And then, click
Or, click Refresh to reset the configuration before applying
30
Download from Www.Somanuals.com. All Manuals Search And Download.
QoS Configuration interface
ꢀ
Click DSCP Mapping to enter TOS priority configuration interface
ꢁ
The system provides 0~63 TOS priority level. When the IP
DSCP [0- 63]:
packet is received, the system will check the TOS level value in the IP
packet that has received. For example: user set the TOS level 25 is high.
The port 1 is following the TOS priority policy. When the packet received
by port 1, the system will check the TOS value of the received IP packet. If
the TOS value of received IP packet is 25(priority = high), and then the
packet priority will have highest priority
ꢁ
Select the priority level – high, medium, low, or normal
Priority:
ꢀ
ꢀ
And then, click Apply to apply the configuration
Or, Click Refesh to reset the configuration before applying
31
Download from Www.Somanuals.com. All Manuals Search And Download.
QoS DSCP Mapping interface
ꢀ
Click VLAN tag Mapping to enter VLAN tag priority configuration interface.
Select the VLAN tag priority level: High, Medium, Normal and Low.
ꢀ
ꢀ
And then, click
Apply to apply the configuration
Or, press Refresh to reset the configuration before applying
QoS VLAN Tag Priority Mapping interface
32
Download from Www.Somanuals.com. All Manuals Search And Download.
System Restart
Reboot the switch in software reset. All the configurations will be reminded
ꢀ
Click Yes to restart the system
System Restart interface
Factory Default
Reset switch to default configuration
ꢀ
Click Yes to reset the all configuration to the default value
Factory Default interface
Firmware Upload
The system provides the Web GUI firmware update function which would allow the
user to update the switch firmware.
Browse
ꢀ
Click
to locate the firmware
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Upload
ꢀ
And then, press
to update the firmware
Firmware Upload interface
Configuration File Transfer
The system provides the Web GUI configuration upload function which would allow
the user to backup the switch configuration.
Browse
ꢀ
ꢀ
ꢀ
Click
to locate the path for Uploading
Upload
And then, press
And then, press
to update the configuration file
to download the configuration file
Download
Firmware Upload interface
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
This section is intended to help user solve the most common problems on the 8
10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web Managed
Switch with.
Incorrect connections
The switch port can auto detect straight or crossover cable when link switch with
other Ethernet device. For the RJ-45 connector should use correct UTP or STP
cable, 10/100Mbps port use 2 pairs twisted cable and Gigabit 1000T port use 4
pairs twisted cable. If the RJ-45 connector is not correct pin on right position then
the link will fail. For fiber connection, please notice that fiber cable mode and fiber
module should be match.
ꢀ Faulty or loose cables
Look for loose or obviously faulty connections. If they appear to be OK, make sure
the connections are snug. IF that does not correct the problem, try a different cable.
ꢀ Non-standard cables
Non-standard and miss-wired cables may cause numerous network collisions and
other network problem, and can seriously impair network performance. A
category-5 cable tester is a recommended tool for every 100Base-T network
installation.
use unshielded twisted-pair (UTP) or shield twisted-pair ( STP ) cable
RJ-45 ports:
Ω
for RJ-45 connections: 100
Category 3, 4 or 5 cable for 10Mbps connections or
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Ω
100
Category 5 cable for 100Mbps connections. Also be sure that the length of
any twisted-pair connection does not exceed 100 meters (328 feet). Gigabit port
should use Cat-5 or cat-5e cable for 1000Mbps connections. The length does not
exceed 100 meters.
ꢀ Improper Network Topologies
It is important to make sure that have a valid network topology. Common topology
faults include excessive cable length and too many repeaters (hubs) between end
nodes. In addition, user should make sure that the network topology contains no
data path loops. Between any two ends nodes, there should be only one active
cabling path at any time. Data path loops will cause broadcast storms that will
severely impact the network performance.
Diagnosing LED Indicators
The switch can be easily monitored through panel indicators to assist in identifying
problems, which describes common problems may encounter and where can find
possible solutions.
If the power indicator does turn on when the power cord is plugged in, it may have a
problem with power outlet, or power cord. However, if the switch powers off after
running for a while check for loose power connections, power losses or surges at
power outlet. If the problem still cannot be solved, contact the local dealer for
assistance.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specification
This section provides the specifications of 8 10/100/1000Base-T with 1 1000Base-X
SFP/RJ45 Combo port Web Managed Switch with.
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
Standard
IEEE 802.1w Rapid Spanning Tree
IEEE 802.3ad Port trunk with LACP
IEEE 802.1p Class of Service
IEEE 802.1x user authentication
IEEE 802.1q Port VLAN Tag
Protocol
CSMA/CD
Technology
Store-and-Forward switching architecture
14,880 pps for 10Mbps
Transfer Rate
LED Indicators
148,800 pps for 100Mbps
1,488,000 pps for 1000Mbps
Per RJ-45 port: 100/1000
Link/Activity
Full duplex/ Collision
Per MINI GBIC: Link/Activity
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Per unit: Power
10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100BASE-TX: 2-pair UTP/STP CAT. 5 cable
EIA/TIA-568 100-ohm (100m)
Network Cable
Gigabit Copper: 4 pair UTP/STP CAT. 5 cable
EIA/TIA 568 100-ohm (100M)
Gigabit copper: 8 x RJ-45 with Auto-MDIX
SFP port: 1 x SFP slot (3.3v)
Connector
Back-plane
16Gbps
MAC address
Memory Buffer
8K Mac address table
144Kbytes
Jumbo packet
Dimensions
Support 9Kbytes jumbo frame
250mm(W) x 133mm(D) x 37mm(H)
Internal power AC 100~240V / 50~60Hz
4.8 Watt (maximum)
Power Supply
Power Consumption
Operating
0℃ to 45℃ (32℃ to 113℃)
Temperature
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Humidity
EMI
10% to 90% (Non-condensing)
FCC Class A
CE
UL
Safety
cUL
10900 Red Circle Drive
Minnetonka, MN 55344
Tel.: +1.952.941.7600
39
Download from Www.Somanuals.com. All Manuals Search And Download.
|