dynadock™ wireless U
User’s Manual
GMAA00165010
07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Safety instructions
Always read the safety instructions carefully:
Do not disassemble, modify, tamper with or repair the
product
❖
Do not attempt to disassemble, modify, tamper with or repair the product
(including the AC adaptor). Disassembly, modification, tampering or
repairing the product could cause fire or electric shock, possibly
resulting in serious injury.
Handling the AC adaptor and power cables/cords or
plugs
❖
When handling the power cable/cord, follow these precautions:
❖
❖
❖
❖
Never tamper with the power cable/cord or plug.
Never splice or alter a power cable/cord.
Never bend or twist a power cable/cord.
Never pull on a power cable/cord to remove a plug from a socket.
Always grasp the plug directly.
❖
❖
Never place heavy objects on a power cable/cord.
Never run a power cable/cord through a pinch point such as a door
or window.
❖
❖
Never place a power cable/cord near a heat source.
Never use nails, staples or similar objects to fasten or attach
cable/cord in place.
❖
Never attempt to disassemble or repair an AC adaptor.
Doing any of the above may damage the cables, and/or result in a
fire or electric shock, possibly resulting in serious injury.
Attaching the power cable/cord
❖
Always confirm that the power plug (and extension cable plug if used)
has been fully inserted into the socket, to ensure a secure electrical
connection. Failure to do so may result in a fire or electric shock,
possibly resulting in serious injury.
❖
Be careful if you use a power strip. An overload on one socket could
cause a fire or electric shock, possibly resulting in serious injury.
Dust on the power plug connectors or connector base
❖
If dust gets on the power plug connectors or connector base, turn the
power off and disconnect the power plug. Then clean the connector
and/or connector base with a dry cloth. Continuing to use the product
without cleaning the power plug may result in a fire or an electric shock,
possibly resulting in serious injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Only use TOSHIBA AC adaptor
❖
Always use the TOSHIBA AC adaptor that may have been provided with
your product, or use AC adaptors specified by TOSHIBA to avoid any risk
of fire or other damage to the product. Use of an incompatible AC
adaptor could cause fire or damage to the product, possibly resulting in
serious injury. TOSHIBA assumes no liability for any damage caused by
use of an incompatible adaptor.
Use correct power source
❖
Never plug the AC adaptor into a power source that does not correspond
to both the voltage and the frequency specified on the regulatory label of
the unit. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury.
Only use approved power cables/cords
❖
Always use or purchase power cables/cords that comply with the legal
voltage and frequency specifications and requirements in the country of
use. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury.
Do not handle the power plug with wet hands
❖
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.
Choking hazards
❖
Never leave small parts such as covers, caps and screws within the reach
of infants or small children. Swallowing a small part may cause choking
and suffocation resulting in death or serious injury. If a part is swallowed,
immediately take appropriate emergency action and consult a doctor.
Avoid liquids, moisture and foreign objects
❖
Never allow any liquids to spill into any part of your product, and never
expose the product to rain, water, seawater or moisture. Exposure to
liquid or moisture can cause electric shock or fire, resulting in damage or
serious injury. If any of these eventualities should accidentally occur,
immediately disconnect the AC adaptor from the power plug socket and
from the product.
Do not connect the power again until you have taken the product
to an authorized service center. Failure to follow these
instructions could result in serious injury or permanent damage
to the product.
Never place your product or AC adaptor on a heat
sensitive surface
❖
❖
Never place your product or AC adaptor on a wooden surface, furniture,
or any other surface that could be marred by exposure to heat since the
product base and AC adaptor's surface increase in temperature during
normal use.
Always place your product or AC adaptor on a flat and hard surface that
is resistant to heat damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Never place your product in locations with excess heat
❖
Never place your product where it will be exposed to excess heat, such
as in direct sunlight, in an unventilated vehicle or near a heater. This may
result in a system failure, malfunction, loss of data or damage to the
product.
Never place your product in a location with extremely
low temperatures
❖
Never place your product in a location where it will be exposed to
extremely low temperatures. This may result in a system failure,
malfunction or loss of data.
Never subject your product to sudden temperature
variations
❖
Never subject your product to sudden temperature variations. This may
result in condensation, causing a system failure, malfunction or loss of
data.
Never operate your product during a thunderstorm
❖
Never operate your product on AC power during a thunderstorm. If you
see lightning or hear thunder, immediately unplug the product. An
electric surge caused by the storm may result in a system failure, loss of
data or hardware damage.
FCC information
FCC notice "Declaration of Conformity Information"
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
❖
❖
❖
Reorient or relocate the receiving antenna(s).
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
❖
Consult the dealer or an experienced radio/TV technician for help.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
FCC Conditions
This equipment has been tested and found to comply with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Notice "Equipment Authorization" Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This device is authorized under Title 47 CFR 15.519 (the FCC Rules and
Regulations). The operation of this device is subject to the following restriction:
This UWB device shall transmit only when it is sending information to an
associated receiver. This UWB device shall cease transmission within 10 seconds
unless it receives an acknowledgement from the associated receiver that its
transmission is being received. An acknowledgement of reception must continue
to be received by the transmitting device at least every 10 seconds of operation or
the UWB device must cease transmitting.
Changes or modifications made to this equipment not expressly
approved by Toshiba or parties authorized by Toshiba could void the
user's authority to operate the device under the FCC Equipment
Authorization. This includes changes or substitutions of the
antennas which are furnished with the device.
Consult the dealer or an experienced radio/TV technician for help.
Only Peripherals complying with the FCC Class B limits may be
attached to this equipment.Operation with noncompliant peripherals
or peripherals not recommended by Toshiba is likely to result in
interference to radio and TV reception. Shielded cables must be used
between the external devices and the docking station’s ports.
NOTE
Contact
Address:
TOSHIBA America Information Systems, Inc.
9740 Irvine Boulevard
Irvine, California 92618-1697
Telephone:
(949) 583-3000
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Copyright statement
This guide is copyrighted by Toshiba Corporation with all rights reserved. Under
the copyright laws, this guide cannot be reproduced in any form without the prior
written permission of Toshiba. No patent liability is assumed, however, with
respect to the use of the information contained herein.
©2009 by Toshiba Corporation. All rights reserved.
Disclaimer
Information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and shall
in no event be liable for any loss of profit or any commercial damage, including
but not limited to special, incidental, consequential, or other damage.
July 2009, Rev1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Trademarks
dynadock is a trademark of Toshiba Corporation.
Adobe and Reader are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
AMD, AMD K6, Athlon and Duron are registered trademarks or trademarks of
Advanced Micro Devices Incorporated.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
Ethernet is a registered trademark and Fast Ethernet is a trademark of Xerox
Corporation.
Intel, Intel Core, Pentium and Celeron are trademarks or registered trademarks of
Intel Corporation.
Microsoft, Windows, Windows XP and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
Other brands and product names are trademarks or registered trademarks of their
respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Features ............................................................13
Front view .........................................................14
Chapter 1: Setting Up the dynadock™ and Connecting
Peripherals......................................................... 20
Setting up the dynadock™ ......................................20
Assemble the dynadock™ .................................20
Connect the power adaptor...............................21
Install the software ...........................................21
Connect the dynadock™ to your computer .......24
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
10
Connecting USB devices...................................31
Undocking and placing the computer into
Selecting Extended mode or Mirror mode ........47
Configuring audio ports ....................................50
Enhancing sound quality...................................52
Enabling digital S/PDIF output ..........................55
Charging USB devices.............................................56
Using standby/sleep/hibernation modes
with the dynadock™..........................................57
Securing the dynadock™ ........................................58
Download from Www.Somanuals.com. All Manuals Search And Download.
USB...................................................................68
Contacting Toshiba .................................................69
Toshiba’s technical support Web site................69
Toshiba voice contact .......................................70
Chapter 4: Specifications........................................................... 71
Specifications .........................................................71
Index............................................................................................ 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing the dynadock™ wireless U, the universal
docking station that enables you to connect your computer
peripherals wirelessly or through a single USB cable to just about
any Windows®-based computer. The wireless function uses UWB
(ultra-wide band) radio technology.
Keep your dynadock™ up-to-date with the latest technological
software driver and support updates.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Overview
13
Overview
Features
❖
Wireless or single USB cable connection to your computer*
Upright slim design saves desktop space
❖
❖
❖
Easily accessible USB and audio ports located on the front
Supports video resolutions up to 1680 x 1050/1600 x 1200
VESA CVT (Coordinated Video Timing) on an external
monitor
❖
Hot-swappable: add or remove most devices without rebooting
the computer
❖
❖
Virtual 7.1 channel digital surround sound
Includes TOSHIBA dynadock Utility for customizing
dynadock™ settings
❖
❖
Charges your USB peripherals with the front powered USB
ports even when the connected computer is off
Undock button allows you to easily and safely dock/undock
your computer from the docking station
*For wireless communication, you will need a computer with Integrated Certified
Wireless USB functionality or a Certified Wireless USB adaptor (included with
certain models).
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Quick Tour
14
Quick Tour
This section identifies the various components of the dynadock™
wireless U. For a description of each component, please refer to the
table beneath each illustration.
Front view
Power light
Indicator light
Powered USB 2.0 ports
(USB Sleep and Charge)
Microphone jack
Headphone jack
(Sample Illustration) Lights and connectors on the front of the
dynadock™
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Quick Tour
15
Component
Description
Glows blue when power is being supplied from the
AC adaptor.
Power light
Indicates the status of docking, undocking, and
charging functions as follows:
Indicator light
Flashing green: Docking is in process.
Solid green: Computer is docked.
Flashing orange: Undocking is in process.
Solid orange: Computer is undocked or
disconnected and the dynadock™'s USB Sleep and
Charge ports are charging any connected,
chargeable devices.
dynadock™ USB Sleep and Charge ports are off.
Connection points for USB 2.0 or 1.1 devices.
When the dynadock™ is powered on, these ports
charge connected battery-powered USB devices
(such as PDAs, MP3 players, and cellular phones)
even when the dynadock™ is disconnected from
your computer or your computer is off. For more
information, please see “Charging USB devices” on
page 56.
Powered USB 2.0
ports
(USB Sleep and
Charge ports)
Note 1: Some USB devices may not support this
feature.
Note 2: Certain USB devices, such as optical disk
drives and hard disk drives, have high power
requirements. Due to the power output limitations
of the USB ports, you may not be able to operate
more than one such device at a time.
Note 3: If your USB device came with an AC
adaptor, be sure to connect the device to a power
outlet with the AC adaptor.
A standard 3.5 mm mini jack for mono audio input
from a microphone.
Microphone jack
Headphone jack
A standard 3.5 mm mini jack for stereo audio
output to headphones/headsets/speakers.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Quick Tour
16
Back view
Antennas
Antenna switch
Line out (Headphones, Speakers)
S/PDIF port
Network port
USB 2.0 ports
DVI-I video port
Mini USB jack
Security Lock Slot
DC-IN
(Sample Illustration) Connections on the back of the dynadock™
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Quick Tour
17
Component
Description
Send and receive wireless signals to/from the
connected computer.
Antennas
Slide the switch down [ ] to enable wireless
communication between your computer and the
dynadock™. Slide the switch up [ ] to connect
your computer to the dynadock™ with a USB cable.
Antenna switch
A standard 3.5 mm mini jack for stereo audio
output to headphones/headsets/speakers.
Line out
(Headphones,
Speakers)
Connection point for digital audio equipment (e.g.
Dolby® Digital Surround Sound receiver and
speaker system).
Note: Requires an optical S/PDIF cable (not
provided) and an optical S/PDIF input jack on the
receiver.
0ptical S/PDIF
digital audio
output port
Connection point for a 10/100 BASE-TX Ethernet
cable (not provided).
Network port
USB 2.0 ports
Connection points for USB 2.0 and 1.1 devices.
Note 1: Certain USB devices, such as optical disk
drives and hard disk drives, have high power
requirements. Due to the power output limitations
of the USB ports, you may not be able to operate
more than one such device at a time.
Note 2: If your USB device came with an AC
adaptor, be sure to connect the device to a power
outlet with the AC adaptor.
monitor with use of the included DVI-I to VGA
adaptor.
DVI-I video port
Mini USB jack
Connection point for the provided USB cable, used
to connect the dynadock™ to your computer.
Note: When setting up a wireless connection, you
will need to use the USB cable temporarily to form
an association between the two devices. For more
information, see “Setting up the dynadock™” on
page 20.
Attachment point for an optional security cable
(not provided) used to deter theft.
Security lock slot
DC-IN
Socket for AC adaptor (provided).
Note: The dynadock™ requires an external power
supply, as it does not draw power from the
computer’s USB bus.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Package contents
18
Top view
Dock/Undock button
(Sample Illustration) The top of the dynadock™
Component
Description
Stops or resumes communications between the
computer and peripherals connected to the
dynadock™. For more information, see “Undocking
your computer” on page 33 and “Re-connecting and
docking your computer” on page 36.
Dock/Undock
button
Also, stops the charging of USB devices connected
to the front USB powered ports. For more
information, see “Charging USB devices” on
page 56.
Package contents
Check to make sure you have all of the following items:
❖
❖
❖
❖
❖
❖
❖
dynadock™ wireless U docking station
Base
USB 2.0 cable
AC adaptor and power cord/cable
Wireless USB adaptor (included with select models only)
DVI-I to VGA adaptor
Installation CD (contains User’s Manual (this document),
drivers and utilities)
❖
❖
Quick Start Guide
Standard limited warranty booklet
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Computer requirements
19
Computer requirements
❖
1.2 GHz or higher processor (Intel® Pentium®/Celeron® family,
or AMD K6®/AMD Athlon™/AMD Duron™ family, or
compatible processor recommended. Intel® Core™ 2 Duo
2.0 GB or higher processor recommended for optimal video
performance.)
❖
512 MB memory or higher (1 GB memory or higher
recommended)
❖
❖
❖
USB 2.0 port
30 MB of available disk space
Certified Wireless USB adaptor or a computer with Integrated
Certified Wireless USB functionality*
❖
Microsoft® Windows® XP (32-bit edition) with SP2/SP3, or
Microsoft® Windows Vista® (32-bit or 64-bit editions) with
SP1
When Windows® 7 becomes available, Windows® 7-compatible
drivers for the dynadock™ wireless U will be available for download
Download link, and then search for your product (part number:
PA3686U).
NOTE
*Required for wireless communication between the dynadock™ and your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Setting Up the dynadock™
Setting up the dynadock™
This section provides instructions on setting up the dynadock™.
You will need to perform the following steps in the order shown:
1
2
3
4
Assemble the dynadock™
Connect the power adaptor
Install the software
Connect the dynadock™ to your computer
You may either:
a
Set up a wireless connection
OR
b
Set up a USB cable connection
For more information on each step, refer to the appropriate section
on the indicated page.
Assemble the dynadock™
Slide the dynadock™ onto the base as shown below.
(Sample Illustration) Attaching the base to the dynadock™
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
21
Setting up the dynadock™
Connect the power adaptor
1
Plug the AC adaptor cord/cable into the DC-IN on the back of
the dynadock™.
(Sample Illustration) Connecting the AC adaptor cord to the
dynadock™
2
Connect the power cord/cable to the AC adaptor, and then
connect the power plug to a live electrical outlet. The power
light on the front panel glows blue when the dynadock™ is
powered on.
Install the software
1
Insert the provided Installation CD into your optical disc drive.
The dynadock Install Menu displays on your computer screen.
If the dynadock Install Menu does not display, follow the steps
provided below for your operating system:
NOTE
In Windows® XP: 1) Double-click My Computer on your desktop.
2) Double-click the DVD/CD drive icon, and then double-click
AutoRun.exe.
In Windows Vista®: 1) Click Start, Computer. 2) Double-click the
DVD/CD drive icon, and then double-click AutoRun.exe.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
Setting up the dynadock™
22
You may need to temporarily disable anti-spyware or anti-virus
programs while installing the software. It is also recommended that
all other applications are closed, as you will need to restart your
computer after the software is installed.
NOTE
You need administrator privileges to install/uninstall the software.
2
Click Setup.
(Sample Image) dynadock Install Menu
Some dynadock™ components require the installation of
Microsoft® .NET Framework v2.0 in order to complete the
installation process. If the dynadock™ installation program
does not detect .NET Framework v2.0 on your computer, please click
the "Install .NET Framework v2.0" button.
NOTE
3
Click Install to install all of the listed programs.
Click Select All if any program in the list is unchecked.
NOTE
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
23
Setting up the dynadock™
(Sample Image) dynadock Installer
The following programs are installed during the installation
process:
Driver Type
Driver Name
Wireless USB Manager
Wireless USB device driver
Wireless USB host driver
dynadock Utility II
dynadock Utility
Network driver
Audio driver
AX88772A & AX88772
USB Multi-Channel Audio Device
TOSHIBA Video Dock Utility
(DisplayLink Core software)
Video driver
4
You will need to read and accept the DisplayLink software license
agreement when prompted, to proceed with the installation.
NOTE
5
Restart your computer when prompted.
For more information on the dynadock™ software, see “Using the
dynadock™ software” page 37.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
Setting up the dynadock™
24
Connect the dynadock™ to your computer
You may either:
❖
Set up a wireless connection
OR
❖
Set up a USB cable connection
Refer to the appropriate section below for the type of connection
you wish to establish.
Set up a wireless connection
To set up a wireless connection, you will need either a Certified
Wireless USB adaptor (included with certain models) or a computer
with integrated Certified Wireless USB functionality.
NOTE
If you are not using a Toshiba adaptor or if your computer has
integrated Certified Wireless USB functionality, please refer to the
documentation provided with your adaptor or computer for
instructions on setting up a wireless connection, instead of following
the steps below.
To set up a wireless connection:
1
Flip the dynadock™’s antennas into the upright position.
(Sample Illustration) dynadock™’s antennas in the upright position
Make sure the antenna switch on the back of the dynadock™ is
2
set to the (down) position.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
25
Setting up the dynadock™
Wireless communication enabled
(Sample Illustration) Wireless communication enabled
3
4
Make sure your computer is turned on.
Connect a Certified Wireless USB adaptor (included with
certain models) to your computer and place the adaptor's
antenna in an upright position.
Restarting may take longer than usual if the computer's operating
system is configured to create a system restore point after a new
device is installed. This occurs after initial installation only. When
the computer restarts, the dynadock™ is ready to use.
NOTE
Indicator light
(Sample Illustration) Inserting a wireless USB adaptor
After you connect a wireless USB adaptor, the device is
automatically detected and the driver is installed.
When the light on the adaptor glows blue, proceed to step 5.
5
Plug one end of the provided USB cable into the Mini USB
port on the back of the dynadock™.
The USB cable is needed only for initially setting up the wireless
connection. The process of initially establishing a connection
between the dynadock™ and your computer with the cable is
called association.
NOTE
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
Setting up the dynadock™
26
(Sample Illustration) Connecting the USB cable to the Mini USB
port
6
Plug the other end of the USB cable into an available USB 2.0
port on your computer.
(Sample Illustration) Connecting the USB cable to your computer
The Wireless USB Manager opens automatically on your
computer screen.
7
Click Yes allow the device to associate to start the association.
(Sample Image) Association screen
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
27
Setting up the dynadock™
8
After successfully completing the association, remove the USB
cable connecting the computer to the dynadock™.
After a few moments, a wireless connection is established and
a message displays on your computer screen asking if you want
to dock your computer.
Connecting opens a line of communication between the computer
and the dynadock™, but not between the computer and external
devices connected to the dynadock™.
NOTE
Docking enables the computer to communicate with devices
connected to the dynadock™. The computer can only be docked with
one dynadock™ at a time.
For optimal performance, the dynadock™ must be within close range
of the adaptor, with no obstructions between the devices.
NOTE
(Sample Image) Click Yes to dock wirelessly to your computer
Click Yes to dock your computer.
9
10 The dynadock™ drivers automatically install. Restart your
computer when prompted.
Restarting may take longer than usual if the computer's operating
system is configured to create a system restore point after a new
device is installed. This occurs after initial installation only. When
the computer restarts, the dynadock™ is ready to use.
NOTE
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
Connecting your peripherals
28
Set up a USB cable connection
1
Move the switch on the back of the dynadock™ to the USB
] position.
[
2
Connect the provided USB cable to the Mini USB port on the
back of the dynadock™.
3
4
Connect the other end of the USB cable to an available USB
port on your computer.
Windows® automatically detects the device and installs the
device drivers.
Restart your computer when prompted.
Restarting may take longer than usual if the computer's operating
system is configured to create a system restore point after a new
device is installed. This occurs after initial installation only. When
the computer restarts, the dynadock™ is ready to use.
NOTE
Connecting your peripherals
Once you have set up a wireless or USB cable connection between
your computer and the dynadock™, you can connect your
computer peripherals to the appropriate ports on the dynadock™.
Please refer to the “Quick Tour” page 14 for information on the
dynadock's ports, and refer to the sections below for information on
connecting specific types of devices.
Connecting to a network
Connect one end of a network cable (not provided) to the Network
port (RJ-45) on the dynadock™ and the other end to your network.
If the network is not automatically connected, configure the
network properties of the Ethernet adaptor as follows:
1
In Windows® XP, select Start, Connect to, and then Show all
Connections.
In Windows Vista®, select Start, Control Panel, View
network status and tasks, and then Manage network
connections.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
29
Connecting your peripherals
2
In the Network Connections folder, double-click the
Connection icon for the dynadock’s Ethernet adaptor, which is
indicated by ASIX AX88772A USB2.0 to Fast Ethernet
Adaptor. This will open the Local Area Connection Properties
window for you to configure the network settings as required
according to your network environment. If you are unsure
about the settings, consult your network administrator for
assistance.
The dynadock's Network port does not support Wake-up-on-LAN.
NOTE
The Local Area Connection icon in the System tray/Notification Area
of your Windows® desktop will not show a connection. Open
"Network Connections" to view the Ethernet Connection.
Connecting a monitor
You can connect a digital (DVI) or analog (VGA) monitor to the
dynadock™. Only one monitor can be connected to the dynadock™
at a time.
To connect a monitor to the dynadock™:
1
If you are connecting a VGA monitor, attach the DVI-I to VGA
adaptor (included with the dynadock™) to the DVI-I video
port on the dynadock™.
2
Connect the monitor cable (not provided) to the DVI-I video
port on the dynadock™ or to the adaptor you connected in
step 1.
3
Connect the other end of the cable to the external monitor.
The monitor cable can be connected/disconnected at any time
without disconnecting the dynadock™ from your computer.
NOTE
By default, the external monitor is set to Extended mode. To
switch to Mirror mode, see “Adjusting video settings” page 47.
If no output is seen on the monitor connected to the dynadock™, the
current video resolution setting may not be supported by the
monitor. This can happen if the monitor does not report its supported
modes to the dynadock’s DVI component. Adjust the resolution of the
external monitor until an image is shown. For more information, see
“Using the TOSHIBA Video Dock Utility” page 45.
NOTE
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
Connecting your peripherals
30
You can customize the video settings of the dynadock™. See
“Adjusting video settings” page 47 for more information.
Connecting audio devices
The dynadock™ provides four audio ports, as shown in the
following illustrations.
Line out
(Headphones, Speakers)
Optical S/PDIF digital
audio output jack
Microphone jack
Headphone jack
Front
Back
(Sample Illustration) dynadock™ wireless U audio ports
The following table indicates which port to use for each type of
audio activity.
Activity
Audio Device
Use this port:
Audio recording
Microphone
Microphone jack
Headphones/headsets/ Headphone jack or Line out
speakers
Audio playback
Digital audio equipment S/PDIF jack
(Egs: Dolby® Digital
Surround Sound receiver
and speaker system with
optical S/PDIF input
port)
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
31
Connecting your peripherals
automatically disabled and the audio ports on the dynadock™ are
automatically enabled. In most cases, simply connect your audio
device to the appropriate port on the dynadock™ and the port is
ready to use. To do any one of the following, please see the
referenced section:
❖
To use the computer’s audio ports (instead of the dynadock's
audio ports) when the computer is docked, please see
“Configuring audio ports” page 50.
❖
To enable virtual 7.1-channel sound on your connected audio
device, please see “Enhancing sound quality” page 52. This
will provide better sound quality over standard stereo output.
❖
To use the dynadock’s S/PDIF jack, please see “Enabling
digital S/PDIF output” page 55.
audio ports, you may have to restart your media player if it is
running.
NOTE
Connecting USB devices
The dynadock™ provides six USB 2.0 ports: four on the back and
two on the front. To locate the USB ports on the dynadock™,
please see the “Quick Tour” page 14.
This section provides basic instructions for connecting most USB
devices to the dynadock™. Please check the documentation that
came with your USB device for any special instructions.
You do not need to turn off the dynadock™ or the docked computer
before connecting a USB device.
NOTE
To connect a USB device to the dynadock™:
1
If your device came with its own AC adaptor, connect the AC
adaptor to the device and to a live electrical outlet.
2
Use a USB cable to connect the device to one of the USB ports
on the dynadock™.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the dynadock™ and Connecting Peripherals
Connecting your peripherals
32
If you want to charge your USB device when the computer connected
to the dynadock™ is off or when there is no computer connected to
the dynadock™, be sure to connect your device to one of the
powered USB ports on the front of the dynadock™. The indicator
light glows orange when charging is taking place.
NOTE
3
Wait for Windows® to recognize the device and install the
drivers. A message should display on your computer screen
indicating when installation is complete and the device is ready
to use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Using the dynadock™ and
Adjusting Settings
Undocking your computer
To avoid losing data and/or damaging your computer and/or
peripherals, be sure to undock your computer from the dynadock™
as described in this section before you do any one of the following:
❖
❖
Disconnect the USB wireless adaptor from your computer.
Disconnect the USB cable connecting your computer to the
dynadock™ (if you are not using a wireless connection).
❖
Move the computer outside of the operational range
(approximately 10 meters/32 feet) of the wireless connection.
"Undocking" your computer stops all communications with the
external devices connected to the dynadock™. After you undock
your computer, it is safe to break the wireless or cable connection
between the computer and the dynadock™.
To undock your computer, either:
❖
❖
Use the button on the top of the dynadock™, or
Use the TOSHIBA dynadock Utility.
If you are using a wireless USB adaptor, you can leave the adaptor
connected to the computer after undocking. However, be careful not
to damage the adaptor (for example, while moving the computer).
NOTE
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Undocking your computer
34
Undocking via the undock button
1
Press the Undock button on the top of the dynadock™ once.
The indicator light on the front of the dynadock™ flashes
orange, and the following message appears on your computer
screen.
(Sample Image) Undocking in progress
2
When the indicator light stops flashing or turns off, it is safe to
move the computer out of range of the dynadock™ antennas or
to disconnect the USB cable if you are using one.
Undocking via the utility
Follow the steps below to undock your computer through the
TOSHIBA dynadock Utility:
1
Right-click the TOSHIBA dynadock Utility icon in the
System tray/Notification Area of your Windows® desktop.
(Sample Image) TOSHIBA dynadock Utility icon
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [ ], if necessary, to display hidden
icons.
NOTE
2
Select Eject Dock from the menu.
(Sample Image) The Eject Dock command
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
35
Undocking your computer
The indicator light on the front of the dynadock™ flashes orange,
and the following message appears on your computer screen.
(Sample Image) Undocking in progress
3
When the indicator light stops flashing or turns off, it is safe to
move the computer out of range of the dynadock™ antennas or
to disconnect the USB cable if you are using one.
If you are using a wireless USB adaptor, you can leave the adaptor
connected to the computer after undocking. However, be careful not
to damage the adaptor (for example, while moving the computer).
NOTE
Undocking and placing the computer into Sleep mode
Use the Eject and Sleep option of the TOSHIBA dynadock Utility
to quickly stop all communications with external devices and place
the computer into Sleep mode.
1
Right-click the TOSHIBA dynadock Utility icon in the
System tray/Notification Area of your Windows® desktop.
(Sample Image) TOSHIBA dynadock Utility icon
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [ ], if necessary, to display hidden
icons.
NOTE
2
Select Eject and Sleep from the TOSHIBA dynadock Utility
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Re-connecting and docking your computer
36
(Sample Image) The Eject and Sleep command
3
Wait before disconnecting the dynadock™ from the computer.
(Sample Image) Undocking in progress
When the computer is undocked, the dynadock Utility icon no
longer appears in the System tray/Notification Area.
4
After the computer is undocked, the computer enters Sleep
mode.
Re-connecting and docking your computer
To re-connect and dock your computer to the dynadock™ (upon
returning to your desk with your computer after a meeting, for
example), do the following:
❖
❖
❖
❖
❖
If you are using a wireless USB adaptor, make sure the adaptor
is properly connected or re-connect the adaptor.
Make sure the computer is within wireless communication
range of the dynadock™.
Remove any obstructions between the computer and the
dynadock™.
If the computer is in standby/sleep/hibernation mode, press the
computer's power button to resume.
Press the Dock button on the top of the dynadock™ to dock.
The indicator light on the front of the dynadock™ flashes
green to indicate docking is in progress. The light turns solid
green when docking is completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
37
Using the dynadock™ software
Using the dynadock™ software
This section provides information on using the following software
to manage the dynadock™ and adjust settings to suit your needs:
❖
❖
❖
❖
❖
The background utility
Wireless USB Manager
TOSHIBA dynadock Utility
USB Multi-Channel Audio Device utility
TOSHIBA Video Dock utility
You can also refer to this section to learn how to uninstall the
software.
The background utility
After the TOSHIBA dynadock Utility is installed and the computer
is restarted, a program named TOSDockApp.exe will run
automatically in the background. This program will be listed in the
Windows® Task Manager. This program detects the connection and
removal of the dynadock™ from the computer.
The background utility does not impact any other programs running
on your computer. Do not turn off the utility as it is required for
proper operation of the dynadock™.
Using the Wireless USB Manager
The Wireless USB Manager is the driver software for the Toshiba
Certified Wireless USB adaptor (included with certain models).
This driver is automatically installed when you run the dynadock
Installation CD (see “Install the software” on page 21 for more
information).
The Toshiba Certified Wireless USB adaptor contains a radio
transmitter/receiver that enables your computer to communicate
wirelessly with the dynadock™. This radio is known as the host
radio. The Wireless USB Manager driver software enables you to
manage the host radio and perform tasks such as the following:
❖
❖
❖
❖
❖
Associate the dynadock™ with your computer
Connect/Disconnect the dynadock™ from your computer
Change/Select the channel used for radio communication
Disable/Enable radio communications
Disable/Enable pop-up messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Using the dynadock™ software
38
If you are using a non-Toshiba Certified Wireless USB adaptor or a
Certified Wireless USB radio built into your computer to
NOTE
communicate with the dynadock™, you may need to use the driver
provided with your wireless USB host module instead of the driver
provided with the dynadock™ to accomplish these tasks.
Accessing the Wireless USB Manager
To start the Wireless USB Manager:
❖
Double-click the Wireless USB Manager icon in the System
tray/Notification Area of your Windows® desktop.
(Sample Image) The Wireless USB Manager icon
The Wireless USB Manager icon appears in your System tray/
Notification Area only when the wireless USB adaptor is connected to
your computer. You may need to click the Show Hidden Icons button
NOTE
[
], to display hidden icons. If the adaptor is not connected to your
computer, you can access the Wireless USB Manager by double-
clicking the Wireless USB Manager icon on your Windows® desktop.
The Wireless USB Manager displays.
(Sample Image) The Wireless USB Manager
The dynadock™ appears on the Devices tab of the Wireless USB
Manager.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
39
Using the dynadock™ software
Changing the Connection Rules
The Connection Rules tab of the Wireless USB Manager allows
you to change the default association behavior of the host radio.
The following options are provided:
❖
❖
❖
Require my permission (default): Each time you connect a
compatible wireless USB device to your computer with a USB
cable, the Wireless USB Manager will prompt you to allow or
reject an association.
Always allow associations: An association will automatically
be established between any compatible wireless USB device
and your computer when you connect the device to your
computer with a USB cable.
Never allow associations: All association requests from
compatible wireless USB devices connected to your computer
with a USB cable will be rejected by the host radio.
Connecting/disconnecting the dynadock™ from your computer
Your computer can only be docked with one dynadock™ at a time.
If you have more than one dynadock™ within range of your
computer, you may want to temporarily prevent your computer
from connecting wirelessly to a particular dynadock™. To
temporarily prevent your computer from connecting wirelessly to a
dynadock™:
❖
On the Devices tab of the Wireless USB Manager, click the
green button next to the dynadock icon. The button turns gray
to indicate the dynadock™ is in a non-connectable state. Click
the button again to allow connection.
You can change the name of the each dynadock™ listed on the
Devices tab of the Wireless USB Manager. This is especially useful if
you have multiple dynadocks, to differentiate between them. To
rename a dynadock™, right-click on the default name, select Rename
from the shortcut menu, and then enter a custom name.
NOTE
To permanently remove the association between the dynadock™
and the host radio:
❖
On the Devices tab of the Wireless USB Manager, right-click
on the dynadock icon and select Remove from the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Using the dynadock™ software
40
If you permanently remove the device, you will not be able to
connect to that particular device again until the device has been
re-associated. To re-associate the device, follow the instructions in
the section “Set up a wireless connection” on page 24.
NOTE
Disable/Enable pop-up messages
The Options tab of the Wireless USB Manager enables you to
disable or enable pop-up messages that appear in the System
tray/Notification Area of your Windows® desktop. For example, a
pop-up message informs you when an associated wireless USB
device, such as the dynadock™, has been connected or
disconnected from your computer. These messages are enabled by
default.
(Sample Image) The Options tab
Change/Select the channel used for radio communication
The Communications tab of the Wireless USB Manager enables
you to view and change radio settings. The default channel setting
is Automatic, which enables the host radio to automatically locate
an available channel for communications.
It is recommended to leave this setting on Automatic. If you manually
select a channel that is being used by another dynadock™ in the
vicinity, the channel bandwidth will be shared by both devices. To
maximize performance, a separate channel should be used for each
dynadock™.
NOTE
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
41
Using the dynadock™ software
If you wish to manually select the channel to be used for
communications between the dynadock™ and your computer, you
can do so by clicking the Requested Channel drop-down menu
and then selecting any channel from the list.
Disable/Enable radio communications
If you take your computer and wireless USB adapter on board an
airplane, FCC regulations require that you disable the host radio in
your wireless USB adaptor to prevent it from transmitting during
the flight.
To temporarily disable the host radio, do one of the following:
❖
Click the Off button on the Communications tab of the
Wireless USB Manager (in the Communication status area
of the window).
❖
Right-click the Wireless USB Manager icon in your
Windows® System tray/Notification Area and select Disable
communications from the menu. The icon turns from blue to
yellow to indicate the change in status.
❖
Undock the dynadock™ by pressing the Undock button, and
then unplug the Certified Wireless USB adaptor from your
computer.
To re-enable communications, reverse the procedure.
Uninstalling the Wireless USB Manager and Host/Device Drivers
To uninstall the Wireless USB Manager and the Wireless USB Host
and Device Drivers, do the following:
❖
To uninstall the Wireless USB Manager and Host Driver:
Uninstall. Follow the onscreen instructions to complete the
uninstall.
❖
To uninstall the Wireless USB Device Driver: Click Start,
Programs, Toshiba, Wireless USB, and then Uninstall DWA
Driver. Follow the onscreen instructions to complete the
install.
To remove all dynadock™ software from your computer, please see
“Uninstalling the software” on page 47.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Using the dynadock™ software
42
Using the TOSHIBA dynadock Utility
The TOSHIBA dynadock Utility provides options for changing
default settings, undocking, configuring audio ports, and more.
Accessing the TOSHIBA dynadock Utility
Click the TOSHIBA dynadock Utility icon for quick access to the
options listed in the table below.
(Sample Image) TOSHIBA dynadock Utility icon
Option
Use this option to:
Undock your computer from the dynadock™.
For more information, see “Undocking your computer” on
page 33.
Eject Dock
Undock and place your computer into Sleep mode.
Configure your audio ports.
page 50.
Eject and Sleep
Select Sound
Device…
Connect to Toshiba support Web sites to obtain updated
drivers, find answers to frequently asked questions, and
more.
Update Support
Settings
Turn Eject & Sleep mode and Charge mode on or off;
Turn notification messages on or off.
For more information, see “Undocking and placing the
computer into Sleep mode” on page 35, “Charging USB
devices” on page 56, and “Selecting message options” on
page 44.
View the dynadock™ wireless U User’s Manual (this
document) on your computer screen.
User’s Manual
About
Find the version number for the TOSHIBA dynadock Utility
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
43
Using the dynadock™ software
If the TOSHIBA dynadock Utility icon is not visible in your System
tray/Notification Area, make sure the dynadock™ is connected and
docked, and then click the Show Hidden Icons button [ ], if
necessary, to display hidden icons.
NOTE
You can also access the Settings options of the TOSHIBA dynadock
Utility through the Windows® Control Panel. Click Start, Control
Panel to open the Control Panel, and then double-click the TOSHIBA
dynadock Utility icon. If the icon is not shown, click Classic view on
the left side of the Control Panel window.
Setting Sleep mode options
Sleep mode enables you to place the computer into Sleep, Standby,
or Hibernation mode after undocking. When the Sleep mode setting
in the TOSHIBA dynadock Utility is enabled, you can do this by
selecting Eject and Sleep from the TOSHIBA dynadock Utility
menu. Sleep mode is enabled by default.
To set Sleep mode options:
1
Click the TOSHIBA dynadock Utility icon in your Windows®
System tray/Notification Area.
(Sample Image) TOSHIBA dynadock Utility icon
2
3
Click Settings.
Select the Eject Dock and Sleep PC Service checkbox to
enable Sleep mode, or de-select the checkbox to disable it.
4
If you are enabling Sleep mode, select Standby or
Hibernation from the Sleep Mode drop-down list to specify
the Sleep mode you want.
For information on Standby and Hibernation modes, see the
documentation that came with your computer.
NOTE
5
Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Using the dynadock™ software
44
Enabling/disabling Charge mode
When the dynadock™ is disconnected from your computer or the
computer's power is turned off, the front USB ports will charge
certain connected USB devices if Charge mode is enabled. Charge
mode is enabled by default.
Some USB devices may not support this feature.
NOTE
To enable or disable Charge mode:
1
Click the TOSHIBA dynadock Utility icon in your Windows®
System tray/Notification Area.
(Sample Image) TOSHIBA dynadock Utility icon
2
3
Click Settings.
Select the Set charge mode after undock checkbox to enable
Charge mode, or de-select the checkbox to disable it.
4
Click OK.
For more information, see “Adjusting audio settings” on page 50
for more information.
Selecting message options
A warning message displays on your computer screen if you
disconnect your computer from the dynadock™ without first
undocking it. To avoid data loss or equipment damage, it is
important to undock to stop all communications with connected
peripherals before you disconnect your computer from the
dynadock™. TOSHIBA recommends that you do not turn off this
warning message.
A message will also display to notify you when undocking is
complete and it is safe to disconnect your computer from the
dynadock™.
To turn messages on or off:
1
Click the TOSHIBA dynadock Utility icon in your Windows®
System tray/Notification Area.
(Sample Image) TOSHIBA dynadock Utility icon
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
45
Using the dynadock™ software
2
3
Click Settings.
Select the checkboxes next to Show undocking complete
message and Show unexpected remove message to turn these
messages on, or de-select the checkboxes to turn them off.
4
Click OK.
Using the USB Multi-Channel Audio Device Utility
Use the USB Multi-Channel Audio Device utility to adjust the
settings for audio playback and recording devices connected to the
dynadock™. With this utility, you can enable virtual 7.1-channel
surround sound and digital S/PDIF output, and otherwise optimize
your audio effects.
To access this utility, click the USB Multi-Channel Audio Device
icon in the System tray/Notification Area of your Windows®
desktop.
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [ ], if necessary, to display hidden
icons.
NOTE
For more information on using this utility, see “Enhancing sound
quality” on page 52 and “Enabling digital S/PDIF output” on
page 55.
Using the TOSHIBA Video Dock Utility
Use the TOSHIBA Video Dock Utility to adjust the settings for the
monitor connected to the dynadock™. With this utility, you can
select Mirror mode or Extended mode, and select screen resolution,
color quality, and refresh rates.
To access the Video Dock Utility:
1
Right-click the TOSHIBA Video Dock icon in the System
tray/Notification Area of your Windows® desktop.
(Sample Image) TOSHIBA Video Dock icon
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Using the dynadock™ software
46
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
icons.
NOTE
2
Select one of the following options from the menu:
Option
Screen Resolution
Use this option to:
Change the resolution setting of the external monitor
connected to the dynadock™. For more information, see
“Supported display modes” on page 49.
Select 16-bit or 32-bit color depth for the external display
connected to the dynadock™.
Color Quality
Screen Rotation
Extend To
Rotate the image on the external monitor connected to the
dynadock™.
Specify the extension direction if you are using multiple
monitors and Extended mode. This setting should match the
physical orientation of the connected monitors relative to
each other. For example, if the external monitor is physically
positioned to the right of your computer's display, select
“Extend to Right”.
Extend your desktop space across multiple monitors, so that
you can display different information on each monitor
connected to your computer.
Extend
Duplicate the image showing on your computer's screen on
the external monitor connected to the dynadock™.
Mirror
Off
Turn off the external display. Devices connected to the
dynadock will still function.
Access the Windows® Display Properties dialog box.
Advanced...
For more information on using this utility, see “Adjusting video
settings” on page 47.
Be sure to select only supported resolution, color quality, and refresh
rate settings. Placing a monitor into an unsupported mode for long
periods can damage it.
If you use multiple dynadocks with a single computer (for example,
one at work and one at home), the video settings for each
dynadock™ are saved when you disconnect the computer. This will
enable you to have each dynadock™ adjusted to different video
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
47
Adjusting video settings
settings for each location. The settings will be retained each time
you use the dynadock™ with your computer.
Uninstalling the software
To remove the dynadock™ software from your computer, please
follow the steps below.
Before uninstalling the software, do the following:
NOTE
❖
❖
❖
Undock the computer from the docking station. See “Undocking
your computer” on page 33 for more information.
Disconnect the dynadock™ from the computer by removing the
USB cable or the wireless USB adaptor.
Close all programs running on your computer.
1
2
Click Start, Programs or All programs, dynadock, and then
Uninstall dynadock.
Follow the on-screen directions to finish the uninstall.
For a basic overview of the video setting options, please see “Using
the TOSHIBA Video Dock Utility” on page 45. For more detailed
information on adjusting the video settings for a monitor connected
to the dynadock™, read this section.
For instructions on connecting a monitor to the dynadock™, see
“Connecting a monitor” on page 29.
NOTE
Selecting Extended mode or Mirror mode
You can choose to set the dynadock’s video output signal to
Extended mode or Mirror mode. The default setting is Extended
mode.
Extended mode extends your desktop space across multiple
monitors, so that you can display different information on each
monitor connected to your computer. This provides a number of
advantages to increase productivity, including the ability to:
❖
❖
❖
❖
View large spreadsheets across two screens
Multitask more effectively without overlapping windows
Compare two documents simultaneously across two screens
View videos/TV on one screen and reviews on the other
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Adjusting video settings
48
Mirror mode duplicates the image on your computer screen on the
external monitor(s) connected to the dynadock™. This mode is
useful if, for example, you want to view information on a larger,
external desktop monitor instead of a smaller, built-in computer
screen. In Mirror mode, the dynadock™ automatically adjusts the
external monitor’s resolution, color quality, and refresh rate settings
to provide the best overall image quality based on your computer’s
settings.
To configure the dynadock’s video output signal to Mirror mode or
Extended mode, connect an external monitor to the dynadock™ as
described in the section “Connecting a monitor” on page 29, and
then follow the steps below:
1
Right-click the TOSHIBA Video Dock icon in the System
tray/Notification Area of your Windows® desktop.
(Sample Image) TOSHIBA Video Dock icon
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [ ], if necessary, to display hidden
icons.
NOTE
2
Select Extend or Mirror from the menu.
If you notice certain windows or other parts of your display are
missing when you disconnect your computer from the dynadock™,
you may need to de-select the Extend my Windows® desktop onto
this monitor checkbox in your Windows® Display Properties dialog
box to return the entire image to your primary screen.
NOTE
You can also use the Windows® Display Properties screen to switch
between Extended mode and Mirror mode.
NOTE
NOTE
The external monitor connected to the dynadock™ may be identified
as either "2" or “3” on the Windows® Display Properties screen
(depending on your computer model), even though there may not be
three viewable displays.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
49
Adjusting video settings
Supported display modes
Three components make up the display mode: resolution, color
depth, and refresh rate. These components are defined as follows.
❖
❖
❖
Resolution: In common usage, the resolution is the number of
pixels displayed on the screen horizontally and vertically.
Color Depth: The number of different colors that can be
shown on the screen at the same time.
Refresh rate: The speed at which the entire screen is
rescanned. Higher frequencies reduce flicker.
The dynadock™ supports the following display modes:
Resolution
640 x 480
Refresh Rates (Hz)
60, 67, 72, 75, 85
Color Depth
720 x 400
70, 85, 88
720 x 480
50, 60
768 x 576
50, 60
800 x 480
60
800 x 600
56, 60, 72, 75, 85
832 x 624
75
848 x 480
60
1024 x 600
1024 x 768
1152 x 864
1152 x 870
1280 x 720
1280 x 768
1280 x 960
1280 x 1024
1280 x 800
1360 x 768
1366 x 768
1368 x 768
1400 x 1050
1440 x 900
1600 x 1200
1680 x 1050
60
60, 70, 75, 85
75
All modes available in both
16-bit and 32-bit color except
modes marked with an
asterisk(*)
75
50, 60
60, 75, 85
60, 85
60, 75, 85*
60
60
50, 60
60
60, 75, 85
60
60
60
*Available in 16-bit color mode only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Adjusting audio settings
50
Please note the following:
❖
❖
Interlaced modes are not supported.
The display modes listed above may not be supported by your
monitor, or your monitor may offer additional modes not
supported by the dynadock™. For information on display
modes supported by your monitor, be sure to check the
documentation supplied with your monitor. Select a mode that
both the dynadock™ and the monitor support.
❖
❖
Placing a monitor into an unsupported mode for long periods
can damage it.
If you are using Mirror mode to clone the primary display’s
image on an external monitor, the dynadock™ will attempt to
use the same display mode on the external monitor that you
selected for the primary display. In some cases, however, this
may not be the most appropriate mode for the mirrored desktop
(for example, if the aspect ratio of the displays is not the same).
In these cases, change the primary display mode to match the
optimum display mode for the external monitor.
Adjusting audio settings
Configuring audio ports
You can playback or record audio either through the dynadock’s
audio ports or the docked computer’s audio ports. However, you
cannot use the audio ports on the docked computer and on the
dynadock™ at the same time.
By default, the audio ports on the dynadock™ are automatically
enabled each time you dock the computer. When you undock the
computer, the audio ports on the computer are automatically
re-enabled.
To change the default settings, you may need to manually adjust the
audio settings in Windows®, as described in this section. For
example, if you want to use the computer’s audio ports while the
computer is docked, you will need to change the default settings.
Configuring audio playback ports
1
Click the TOSHIBA dynadock Utility icon in the System
tray/Notification Area of your Windows® desktop.
(Sample Image) TOSHIBA dynadock Utility icon
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
51
Adjusting audio settings
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [ ], if necessary, to display hidden
icons.
NOTE
2
3
Select Select Sound Device… from the menu.
On the Playback tab of the dialog box, select one of the
following:
❖
❖
To use the dynadock's Headphone/Speakers/Line out jack,
select USB Multi-Channel Audio Device.
To use the docked computer's Headphone/Speakers/Line
out jack, select a different playback device (other than
USB Multi-Channel Audio Device).
4
5
6
Click Set Default.
Click OK.
Connect your audio playback device to the jack you enabled in
step 3.
You may need to restart your media player for the audio changes to
take effect.
NOTE
Configuring audio recording ports (Microphone)
1
Click the TOSHIBA dynadock Utility icon in the System
tray/Notification Area of your Windows® desktop.
(Sample Image) TOSHIBA dynadock Utility icon
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [ ], if necessary, to display hidden
icons.
NOTE
2
3
Select Select Sound Device… from the menu.
On the Recording tab of the dialog box, select one of the
following:
❖
To use the dynadock's Microphone jack, select USB
Multi-Channel Audio Device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Adjusting audio settings
52
❖
To use the docked computer's Microphone jack, select a
different recording device (other than USB Multi-Channel
Audio Device).
4
5
6
Click Set Default.
Click OK.
Connect your microphone to the jack you enabled in step 3.
Enhancing sound quality
With the included software, you can experience 7.1-channel virtual
surround sound through two-channel speakers or headphones
connected to the dynadock™.
To enable virtual 7.1-channel sound:
1
Connect your two-channel speakers or headphones to the
dynadock™.
2
Click the USB Multi-Channel Audio Device icon in the
System tray/Notification Area of your Windows® desktop.
(Sample Image) USB Multi-Channel Audio Device Utility icon
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [ ], if necessary, to display hidden
icons.
NOTE
The USB Multi-Channel Audio Device Utility opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
53
Adjusting audio settings
(Sample Image) The USB Multi-Channel Audio Device Utility
3
In the Analog Output section of the dialog box, select one of
the following:
❖
Headphone or [ ], if you connected headphones in
step 1.
❖
2 Speakers, if you connected speakers in step 1.
4
In the DSP Mode section of the dialog box, click the
7.1 Virtual Speaker Shifter button.
(Sample Image) The 7.1 Virtual Speaker Shifter button
Click the Advanced Settings button next to DSP Mode.
5
(Sample Image) The Advanced Settings button
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Adjusting audio settings
54
The Speaker Shifter controls display.
6
Use the Shifter controls to adjust your virtual speaker settings,
as indicated in the table below.
1
3
5
6
2
4
Shifter
controls
The listener
(top view)
(Sample Image) Shifter Controls
The dialog box shows the location of the virtual speakers relative to
the listener, depicted in the center.
NOTE
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
55
Adjusting audio settings
Control(s) Click to:
Increase/decrease the volume of all virtual speakers
Rotate all virtual speakers clockwise
1
2
+/-
Rotate all virtual speakers counterclockwise
Manually rotate all virtual speakers
3
4
5
Manually change the location of a specific speaker. Click the
button and then click and drag the speaker to the desired
location.
This control enables you to enhance an individual channel. For
example, a low-volume center (for dialog) can be enhanced by
dragging it closer to the listener.
Return to the default settings
6
Reset
7
Click the Advanced Settings button next to DSP Mode to
close the Shifter controls and return to the basic controls
screen.
8
9
Adjust other settings, if desired, to suit your sound preferences.
Click OK to close the dialog box.
You can now listen to virtual 7.1-channel sound through your two-
channel headphones or speakers.
Enabling digital S/PDIF output
Using the S/PDIF Output feature in the included software you can
directly output the digital sound source from your computer to your
home theater equipment without loss of sound quality.
To experience true digital sound quality, your digital audio content
and your external decoder/AV receiver connected to the
dynadock™ must both support Dolby® Digital or DTS decoding.
You will also need to enable the S/PDIF output function in the USB
Multi-Channel Audio Device utility, as described below.
To enable digital S/PDIF output:
1
Connect your external decoder/AV receiver/speakers to the
dynadock’s S/PDIF jack. You will need a TOSlink optical
digital audio cable (purchased separately), to connect the
dynadock™ to your audio equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Charging USB devices
56
2
Click the USB Multi-Channel Audio Device icon in the
System tray/Notification Area of your Windows® desktop.
(Sample Image) USB Multi-Channel Audio Device Utility icon
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [ ], if necessary, to display hidden
icons.
NOTE
3
Click the [ ] button next to S/PDIF Output, and then select
Digital Audio 48KHz from the drop-down list.
4
5
Click OK.
Configure the Audio Output setting of your media playback
software to use S/PDIF.
To locate the Audio Out control, access your media player’s setup or
configuration screen. For more information, please see the
documentation provided with your media playback software.
NOTE
You can charge select USB devices (such as PDAs, MP3 players,
and cellular phones) using the dynadock's two front USB ports
(USB Sleep and Charge ports) even when your computer is
undocked or disconnected from the dynadock™, or your computer
is off.
Charge mode is enabled by default. See “Using the TOSHIBA
dynadock Utility” on page 42 to enable/disable Charge mode.
Some USB devices may not support this feature.
NOTE
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Using standby/sleep/hibernation modes with the dynadock™
57
To charge a device when the dynadock™ is disconnected or the
connected computer is off:
1
2
3
Make sure the dynadock's AC adaptor is connected to an
electrical outlet.
Connect the device you want to charge to one of the dynadock's
front USB ports.
Press the Dock/Undock button once. The indicator light glows
orange to indicate charging is in progress.
To stop charging the device, press the Dock/Undock button again.
The indicator light turns off.
Using standby/sleep/hibernation modes with the
dynadock™
When your docked computer enters standby/sleep/hibernation
mode, devices connected to the dynadock™ will not function until
the computer returns to an active state. For example, if you are
using the Ethernet port for high-speed network access, network
access will not be available until the computer resumes from
standby/sleep/hibernation.
In addition, please keep in mind the following important
information regarding the affect of standby/sleep/hibernation mode
on external monitors connected to the dynadock™:
❖
The external monitor connected to the dynadock™ will go
blank if the computer enters standby/sleep/hibernation mode.
❖
In Mirror mode, the external monitor retains the settings it had
previously when the computer resumes from standby/sleep/
hibernation.
❖
❖
In Extended mode, windows that were previously on the
external monitor may appear on the computer's built-in display
when the computer resumes from standby/sleep/hibernation.
You may need to reposition the windows by dragging them to
the external desktop again.
If the external monitor is in Extended mode and the computer
requires you to log in after resuming from standby/sleep/
hibernation, the login screen will appear on the primary
computer monitor, not the external monitor. This is consistent
with Windows® operating system standards.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the dynadock™ and Adjusting Settings
Securing the dynadock™
58
Securing the dynadock™
The security lock slot enables you to connect a security cable
(not provided) to help prevent unauthorized removal of the
dynadock™.
Follow these steps to secure your dynadock™:
1
Attach your security cable (purchased separately) to a desk or
other large object, following the instructions included with
your security cable.
2
3
Insert the lock end of the security cable into the dynadock’s
security lock slot.
Turn the key or set the combination on the end of the security
cable.
Security lock slot
(Sample Illustration) Connecting a security cable to the
dynadock™
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Troubleshooting and
Support
Troubleshooting
This section provides answers for problems you may encounter
when using your dynadock™. Some problems are relatively easy to
identify and solve; however, others may require help from your
network administrator or company technical support staff. If you
Toshiba’s support services at the end of this section.
in this manual, in your computer’s user’s guide and/or in any
manuals that came with your optional peripheral devices.
following categories:
❖
❖
❖
❖
❖
❖
❖
Power
Display/Video
Audio/sound
Connection/Docking
Network
USB
Other
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
Troubleshooting
60
Due to USB bandwidth limitations, you may notice performance
issues if you are performing several resource-intensive tasks
simultaneously (such as playing audio over more than two channels
while simultaneously recording audio, transferring large files and
using a high-definition web camera). This type of activity is common
when running instant messaging applications. In such situations, the
screen may go black or become unresponsive or there may be no
sound from the connected audio device. To avoid these performance
limitations, use two-channel audio output and/or connect fewer
devices at a time.
NOTE
Power
Problem(s)
Solution(s)
It is used to stop any devices connected to the dynadock™ so
that the dynadock™ can be safely disconnected from your
computer. It is not a power button.
What is the button on the top
of the dynadock™ used for?
Is it a power button?
The dynadock™ does not power the computer. Use the AC
adaptor that came with your computer to power your computer.
Docked computer will not
turn on (your computer’s AC
power light does not turn
on).
The dynadock™ is a universal docking station that connects to
the computer via USB. USB provides only 500mA of electric
current, which is not enough to power a computer or charge its
battery.
Why doesn’t the dynadock™
charge the computer’s
battery and power the
computer like a port
replicator?
Check the connections. Make sure the AC adaptor and power
cord/cable that came with the dynadock™ is firmly connected
to the dynadock™ and a live electrical outlet.
Check the condition of the AC adaptor, power
cord/cable, and plug prongs. If they are damaged, replace the
adaptor and power cord/cable.
The dynadock™ does not
turn on (the dynadock’s
power light does not turn
on).
Disconnect and reconnect the AC adaptor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
61
Troubleshooting
Display/Video
For additional information on troubleshooting dynadock™ video
issues, please visit the DisplayLink Web site at
NOTE
Problem(s)
Solution(s)
Make sure that the external monitor’s power switch is on.
Confirm that the external monitor’s power cable is plugged into
a live electrical outlet.
Make sure that the external monitor is securely connected to
the dynadock™.
External monitor does not
turn on (the monitor’s power
light does not turn on).
Check the external monitor settings.
Make sure the dynadock™ is connected to your computer
(wirelessly or with a USB cable) and the computer is docked
(indicator light on dynadock™ is green).
Refer also to the computer user’s manual and to the external
monitor’s documentation.
Try adjusting the resolution, contrast and or brightness
controls on the external monitor.
Make sure the external display is not set to Off in the TOSHIBA
Video Dock Utility. For more information, see Using the
TOSHIBA Video Dock Utility.
No image displays on the
external monitor connected
to the dynadock™.
Check that the dynadock™ is connected (wirelessly or with a
USB cable) to your computer.
Check to make sure that the computer is docked (the indicator
light on the front of the dynadock™ is solid green). For more
information, please see “Re-connecting and docking your
computer” on page 36.
Make sure your Windows® operating system is updated with
the latest available Service Pack from Microsoft®. Your
computer BIOS (Basic Input/Output System) may also need to
be updated. Refer to the your computer manufacturer's Web
site for more information. Restart your computer after updating
the operating system and/or the BIOS, and try using the
dynadock™ again.
Check that the cable connecting the external monitor to the
dynadock™ is firmly attached.
Display error.
Try restarting the application.
A program window on the
external monitor connected
to the dynadock™ has gone
black or is unresponsive.
If you are performing several resource-intensive tasks
simultaneously (for example, playing audio over more than two
channels, recording audio, transferring large files, and using a
web camera at the same time), the issue may be due to USB
bandwidth limitations.
To avoid these performance limitations, use two-channel audio
output and/or connect fewer devices at a time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
Troubleshooting
62
Problem(s)
Solution(s)
The Fn + F5 and Fn + Space hot key functionality detailed in
your Toshiba computer User's Guide controls the video
controller for the computer's built-in display and your
computer's video port. These hot keys cannot be used to
control an external display connected via the dynadock™. To
control the video adaptor within the dynadock™, see
“Adjusting video settings” on page 47.
The Fn + F5 and Fn + Space
hot keys on my Toshiba
computer do not affect the
external monitor connected
to my system via the
dynadock™.
The default configuration for the external monitor connected to
the dynadock™ is Extended mode (an extension of the image
on the computer). This mode allows you to display different
information on each monitor connected to your computer. Drag
a window off of the right side of your primary display to have it
appear on the external monitor.
The external monitor
connected to the dynadock™
shows only the wallpaper
background of my
Windows® desktop.
To switch to Mirror mode, so that an exact duplicate of the
image on your primary monitor displays on the external
monitor, please see “Adjusting video settings” on page 47.
The dynadock™ uses an advanced video graphics controller to
display images on an external monitor connected to the
dynadock™. However, the dynadock™ connects to the
computer via USB, and due to USB 2.0 data transfer speed
limitations, some or all portions of video/game playback may
appear slow or choppy. This is not a malfunction of the
dynadock™. For optimal video playback performance, use your
computer’s display.
Video or game playback is
slow or choppy on the
external monitor connected
to the dynadock™.
My Windows Vista® system
runs more slowly when an
external monitor is
connected to the computer
via the dynadock™.
This may occur if the external monitor is set to Mirror mode
and the display resolution is higher than 1280 x 800. You can
take one or more of the following actions to resolve the
problem:
❖
Disable the Aero color scheme. (Click Start, Control Panel,
Appearance and Personalization, Personalization, and then
Window Color and Appearance. The Appearance Settings
window opens. Select a different color scheme other than
"Windows Aero."
❖
❖
Lower the display resolution.
Switch to Extended mode.
Try a different media player.
For optimal video playback performance, use the computer's
display.
Cannot play videos on an
external monitor connected
to the dynadock™.
The dynadock™ video card requires Extended Display
Identification Data (EDID) to be supplied by a connected
monitor. This information includes resolution settings
supported by the monitor. Some monitors do not supply this
information, and in such cases the resolution settings available
in the Video Dock icon menu will be limited, to avoid damage
to the monitor.
The Video Dock icon menu
does not list all of the
resolution modes my
monitor is capable of
displaying.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
63
Troubleshooting
Problem(s)
Solution(s)
Some versions of ATI Catalyst Control Center are not
I cannot open the ATI
supported by the dynadock™. Use Windows® Display
Catalyst Control Center on
my computer since I
Properties and the Toshiba Video Dock utility instead to control
your display(s).
installed the dynadock™
display drivers and utility.
The monitor name displayed in the Windows® Device Manager
is controlled by Windows®.This designation will not affect the
functionality of the device.
The external monitor
connected to the dynadock™
is incorrectly identified as a
"Non-PNP monitor" in the
Windows® Device Manager.
Transient Multi-Monitor Manager (TMM) in Windows Vista® is
not supported by this product. Use the TOSHIBA Video Dock
utility instead to configure your computer for using an external
monitor connected to the dynadock™.
I cannot run Transient Multi-
Monitor Manager in
Windows Vista® since I
installed the dynadock™
display drivers and utility.
External monitors are automatically disabled when you undock
or when the system enters standby/sleep/hibernation mode.
This may sometimes cause windows to be returned to the
primary display when you re-dock or the system resumes. To
reposition the windows, drag the window(s) to the external
display.
After I re-dock my computer
or after my computer
resumes from standby/
sleep/hibernation mode,
windows that were
previously displayed on the
extended desktop are now
displayed on the primary
monitor.
To return an open window to the primary display, right-click
the taskbar button for that program and select Minimize, and
then right-click the button again and select Maximize.
Using the Video Dock utility, change the display mode to
Mirror mode. All open windows will return to the primary
display. To prevent this from occurring the next time you
undock, you can either set the display mode to Mirror before
undocking or drag all windows to the primary desktop before
undocking.
When I undock my
computer, windows that
were previously displayed
on the extended desktop do
not return to my primary
display.
This product does not support full-screen DOS mode on an
external monitor connected to the dynadock™. To use
full-screen DOS mode, disconnect the dynadock™ and use
your computer's display.
I cannot use full-screen DOS
mode on an external monitor
connected to the
dynadock™.
On some systems, the dynadock™ video adapter cannot
control the internal display.
The computer's built-in
display does not turn off
when the external monitor
connected to the dynadock™
is set as the primary
monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
Troubleshooting
64
Problem(s)
Solution(s)
Mirror mode is not available if the external monitor connected
to the dynadock™ is set as the primary display. To enable
Mirror mode, set the computer's built-in display as the primary
display in the Windows Display Properties dialog box.
Mirror mode is not available
(grayed out).
This product does not support SLI mode when more than two
graphics cards are installed in the connected computer. In such
cases, SLI mode is disabled.
Scalable Link Interface (SLI)
mode is not available.
Try dragging the computer's built-in display icon instead,
relative to the external monitor icon.
In Windows Display
Properties, I cannot move
the external monitor icon
where I want relative to the
icon of the computer's
built-in display
Follow these steps to fix the problem:
1
I cannot drag windows from
my primary display to the
external monitor connected
to the dynadock™.
Open the Windows® Display Properties dialog box and
position the monitor icons on the Settings tab to match the
physical arrangement of your monitors.
2
In the Toshiba Video Dock utility, make sure the "Extend to"
setting matches the physical arrangement of your monitors.
For example, if the external monitor is to the right of the
computer display, select "Extend to right."
3
Drag the window you want to move in the direction that
matches the extension setting.
For example, if the desktop space is extended to the right,
drag the window off of the right edge of the primary display
and it will appear on the extended desktop.
This product does not support 3D programs. Running
applications that use certain DirectDraw commands (such as
some 2D gaming applications) is also not supported. If you
want to play these games in full-screen mode, disconnect the
dynadock™ and use your computer's display.
I cannot run a 3D program
or a program using
DirectDraw commands on
the external monitor
connected to the
dynadock™.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
65
Troubleshooting
Audio/sound
Problem(s)
Solution(s)
Check and adjust the volume settings.
There is no sound coming
from the external audio
device connected to the
dynadock™.
Make sure the cable connecting the audio device to the
dynadock’s Line out, Headphone, or Microphone jack is
secure.
Windows® are not selected or that the volume is not set too
low. To locate these settings, double-click the speaker icon in
your Windows® System tray/Notification Area.
Close your media player application, if it is running. Wait
approximately 10-15 seconds for the operating system to
recognize the audio device connected to the dynadock™ and
then restart your media player application.
The audio port on the dynadock™ may be disabled. To enable
the port, follow the instructions in “Configuring audio ports”
on page 50.
able to play sound over more than two channels if you are
simultaneously performing other resource-intensive tasks. To
avoid these performance limitations, use two-channel audio
output and/or connect fewer devices at a time.
By default, the internal speakers and audio ports on the
computer are disabled when the computer is docked. To enable
the speakers or audio ports on the docked computer, so that
you can connect audio devices directly to your computer when
it is docked, follow the instructions in “Configuring audio
ports” on page 50.
There is no sound coming
from the computer’s internal
speakers, or from the
headphones/headset
connected directly to the
docked computer.
Check that the Mute all/Mute checkboxes in Windows® are not
selected. To locate these settings double-click the speaker icon
in your Windows® System tray/Notification Area.
Close the media player application, if it is running. Wait
approximately 10-15 seconds for the operating system to
recognize the audio device and then restart the media player
application.
Manually enable the dynadock™ audio ports as described in
the section “Adjusting audio settings” on page 50.
No sound outputs from the
dynadock™ audio ports after
I restart my computer or after
it resumes from standby/
sleep/hibernation mode.
The computer’s operating system controls the default volume
after the system is restarted. You will need to manually reset
the volume to the desired level after the system has restarted.
After my computer is
restarted, the input volume
for the microphone
connected to the dynadock™
reverts to the default setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
Troubleshooting
66
Problem(s)
Solution(s)
Disconnect the dynadock™ from your computer and play the
file again.
Sound is distorted or
delayed when playing some
multimedia files.
Connection/Docking
Problem(s)
Solution(s)
Make sure you have properly connected the adaptor to your
computer.
Disconnect and then reconnect the adaptor.
The computer's USB port may be damaged. Check to see if
other devices can be successfully connected to the port.
My computer does not
automatically detect the
Certified Wireless USB
adaptor.
Connecting opens a line of communication between the
computer and the dynadock™, but not between the computer
and external devices connected to the dynadock™.
Docking enables the computer to communicate with devices
connected to the dynadock™. The computer can only be
docked with one dynadock™ at a time.
What is the difference
between connecting and
docking?
If you are using a wireless connection:
I cannot get the computer
to connect and dock
(the indicator light does not
turn solid green).
❖
❖
❖
❖
❖
❖
The computer may be too far away from the dynadock™; move
closer to the dynadock™.
Make sure that there is nothing between the computer and the
dynadock™ (for example, walls/monitors).
Make sure the wireless USB adaptor is properly connected to
your computer.
Make sure the adaptor’s antenna (if you are using an adaptor)
and the dynadock’s antennas are in the upright position.
Make sure the antenna switch on the back of the dynadock™ is
set to the down position.
Verify that the settings in the Wireless USB Manager utility are
configured correctly to enable wireless communication. For
more information, please see “Using the Wireless USB
Manager” on page 37.
If you are using a wired (USB cable) connection:
❖
Make sure the USB cable connecting the devices is secure on
both ends.
❖
Make sure the antenna switch on the back of the dynadock™ is
set to the
(up) position.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
67
Troubleshooting
Problem(s)
Solution(s)
The computer may be out of wireless communication range.
Bring the computer within close range of the dynadock™ to
automatically reconnect.
The connection to the
dynadock™ has been lost.
The computer may be in standby/sleep/hibernation mode. The
computer will re-connect when it resumes from standby/sleep/
hibernation.
In wireless mode, the USB adaptor may have been
disconnected. Re-connect the USB adaptor to the computer.
In wired mode, the USB cable may have been disconnected.
Re-connect the USB cable.
There may be an obstruction between the dynadock™ and your
computer that is preventing wireless communication. Remove
the obstruction.
Make sure the antenna switch on the back of the dynadock™ is
in the correct position (up for communication via a USB cable;
down for wireless communication).
Network
Problem(s)
Solution(s)
Check that the computer is properly configured to
communicate with the network before connecting the LAN
cable to the dynadock™. If necessary, contact your system
administrator for assistance.
Cannot access the local area
network (LAN).
Check that the network cable is properly connected to the
dynadock™. For more information see “Connecting to a
network” on page 28.
Make sure the dynadock™ is connected to your computer
(wirelessly or with a USB cable) and the computer is docked
(indicator light on dynadock™ is green).
If the problem is related to the dynadock™ hardware, see the
“Toshiba Support” on page 69.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
Troubleshooting
68
USB
Problem(s)
Solution(s)
Make sure the dynadock™ is connected to your computer
(wirelessly or with a USB cable) and the computer is docked
(indicator light on dynadock™ is green).
USB device does not work.
Check that the cable connection between the USB port on the
dynadock™ and the USB device is secure.
Make sure that the USB device drivers are properly installed.
Refer to the operating system documentation for more
information.
Make sure that the AC adaptor (if applicable) is connected
securely to the USB device and a live electrical outlet.
Refer to the documentation that came with the USB device.
This problem may occur when there are six USB devices
connected to the dynadock™ and the computer enters standby/
sleep/hibernation mode or is restarted. To resolve the issue,
disconnect and then re-connect one of the USB devices.
A USB device(s) connected
to the dynadock™ does not
work after resumption from
standby/sleep/hibernation
or restart. Yellow
exclamation points appear in
the Windows Device
Manager next to one or more
of the connected USB
devices.
Make sure that the USB device is connected to one of the front
powered USB ports.
Make sure the AC adaptor/cord is firmly connected to the
dynadock™ and a live electrical outlet.
The dynadock™ is not
charging the USB device.
Make sure that “Charge mode” is enabled. See “Charging USB
devices” on page 56.
Make sure that the dynadock's blue power light is on.
Some USB devices may not support this feature.
Due to USB bandwidth limitations, real-time devices (for
example, Web cameras, microphones, and speakers) may not
operate properly if more than two such devices are connected
to the dynadock™ at the same time.
My real-time device (for
example, a Web camera,
microphone, or speakers)
does not operate properly
when connected to the
dynadock™.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
69
Toshiba Support
Other
Problem(s)
Solution(s)
Make sure your Windows® operating system is updated with
the latest available Service Pack from Microsoft®. Your
computer BIOS (Basic Input/Output System) may also need to
be updated. Refer to the your computer manufacturer's Web
site for more information. Restart your computer after updating
the operating system and/or the BIOS, and try using the
dynadock™ again.
My computer's display is
showing a blue error screen,
after I connected the
dynadock™ to my computer.
The blue error screen may be unrelated to the dynadock™.
Refer to the documentation that came with your computer and
your computer manufacturer's Web site for more information.
Toshiba Support
If you require additional help or are still having problems operating
the dynadock™, you may need to contact Toshiba for additional
technical assistance.
Before you call
Since some problems may be related to software or the operating
system, it is important that you investigate other sources of
assistance first.
Try the following, before contacting Toshiba:
❖
Review the user’s manual and/or troubleshooting sections in
the documentation supplied with your software and/or
peripheral devices.
❖
If a problem occurs when you are running software
applications, consult the software documentation for
troubleshooting suggestions. Contact the software company’s
technical support department for assistance.
❖
Consult the reseller or dealer from whom you purchased your
computer, dynadock™, optional peripheral devices and/or
software. They are your best resource for current information
and support.
Contacting Toshiba
Toshiba’s technical support Web site
For technical support, or to stay current on the most recent software
and hardware options for your dynadock™ and for other product
information, be sure to regularly check the Toshiba Web site at
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and Support
Contacting Toshiba
70
Toshiba voice contact
Before calling Toshiba, make sure you have:
❖
❖
❖
Your dynadock’s serial number
The computer and any optional devices related to the problem
Backup copies of your Windows® operating system and all
other preloaded software on your choice of media
❖
❖
❖
Name and version of the program involved in the problem, if
applicable, along with the its installation media
Information about what you were doing when the problem
occurred
Exact error messages and when they occurred
For technical support, call the Toshiba Customer Support Center:
Within the United States at (800) 457-7777
Outside the United States at (949) 859-4273
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
Specifications
This section summarizes the dynadock’s technical specifications.*
Physical dimensions
Weight
Size
490 g/17.2 oz (including the base)
42 (w) x 77 (d) x 222 (h) mm/1.7 (w) x 3.0 (d) x 8.7 (h) in
(main body)
112.5 (w) x 130 (d) x 234 (h) mm/4.4 (w) x 5.2 (d) x 9.3 (h) in
(with base connected)
Environmental requirements
Conditions
Ambient temperature
Relative humidity
20 to 80%
5 to 35 °C (41 to 95 °F)
-20 to 65 °C (-4 to 149 °F)
20 °C per hour maximum
26 °C maximum
Operating
10 to 90%
Non-operating
Thermal Gradient
Wet-bulb Temperature
Power requirements
100-240 volts AC
50-60 Hz (cycles per second)
AC adaptor
15V DC
dynadock™
3.0/4.0 amperes (differs per unit)
71
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Specifications
General specifications
Computer Interface
USB 2.0 or UWB (ultra-wide band radio link)
4 USB 2.0 ports in the back
2 USB 2.0 Powered ports in front
Ports and Connectors
1 S/PDIF connector (optical digital audio output)
1 Ethernet port (10/100 Base-T Ethernet RJ-45
connector)
1 DVI-I port (Digital 24-pin Female Connector)
1 Microphone connector (3.5 mm mono audio in)
1 Headphones connector (3.5 mm stereo audio out)
1 Line out(3.5 mm stereo audio out)
1 DC-IN socket
1 Security lock slot
Windows® XP: Mirror Desktop, Extended Desktop,
Supported Video Display
Modes
Primary Display
Windows Vista®: Mirror Desktop, Extended Desktop,
Primary Display
*Depending on your operating system, some
built-in video adaptors may prevent a second monitor
from being the primary display.
*Specifications are subject to change without further notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
button
undocking 34
A
AC power
connection 21
adjusting
audio settings 50
video settings 47
antenna switch 17
antennas 17
assemble
dynadock™ 20
associations
dynadock™ with computer 39
audio devices
connecting 30
audio ports
configuring 50
audio settings
adjusting 50
C
changing
Charge mode
charging
computer
re-connecting 36
undocking 33
configuring
audio ports 50
connect
audio/sound
AC power 21
DC-IN 21
issues 65
dynadock™ to computer 24
connecting
B
back view
audio devices 30
Mini USB cable 26
Quick Tour 16
background utility 37
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
74
monitor to dynadock™ 29
peripherals 28
enhancing
to a network 28
USB cable to computer 26
USB devices 31
dynadock™ 71
connecting/disconnecting
dynadock™ from computer 39
Connection Rules
changing 39
connection/docking
issues 66
Extended/Mirror mode
selecting 47
FCC information 5
front view
Quick Tour 14
contacting Toshiba 69
G
D
DC-IN
connection 21
DC-IN port 17
H
Hibernation mode 57
disable/enable
pop-up messages 40
radio communications 41
display/video
issues 61
dock/undock button 18
docking
I
icon
safety 2
icons
inserting
install
software 21
instructions
your computer 36
dynadock Install Menu 22
dynadock™
antennas 17
assemble 20
environmental requirements 71
general specifications 72
physical dimensions 71
power requirements 71
security lock slot 58
setting up 20
introduction 12
issues
dynadock™ software
using 37
audio/sound 65
connection/docking 66
display/video 61
Network 67
Other 69
E
enable
virtual 7.1 channel surround
sound 52
enabling
power 60
USB 68
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
75
power
issues 60
power requirements
dynadock™ 71
L
light
indicator 15
power 15
Line out 17
M
Quick Tour 14
top view 18
Microphone jack 15
Mini USB jack 17
monitor
connecting 29
R
N
radio communication 40
disable/enable 41
Network
issues 67
network
connecting 28
Network port 17
your computer 36
S
O
S/PDIF output
Optical S/PDIF 17
Other
safety
issues 69
P
instructions 3
selecting
setting
Sleep mode options 43
setting up
the dynadock™ 20
Sleep mode 57
undocking 35
Sleep mode options
setting 43
package contents 18
peripherals
connecting 28
physical dimensions
dynadock™ 71
pop-up messages
disable/enable 40
port
DC-IN 17
Headphone jack 15
Line out (Headphones, Speakers)
17
Microphone jack 15
Mini USB 17
Mini USB, connecting 26
Network 17
Optical S/PDIF 17
USB 2.0 (2) (USB Sleep and
Charge ports) 15
software
install 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
76
uninstalling 47
sound quality
enhancing 52
specifications 71
Standby mode 57
switch
TOSHIBA dynadock Utility 42
TOSHIBA Video Dock Utility 45
USBMulti-ChannelAudioUtility
45
Wireless USB Manager 37
utility
undocking 34
antenna switch 17
T
V
top view
Quick Tour 18
Toshiba
virtual 7.1 channel surround sound
enable 52
Web site 69
TOSHIBA dynadock Utility
using 42
Toshiba support 69
TOSHIBA Video Dock Utility
using 45
W
set up 24
Wireless USB Manager
using 37
troubleshooting 59
U
undocking
Sleep mode 35
via button 34
Wireless USB Manager window 38
via the utility 34
your computer 33
uninstalling
Host/Device Drivers 41
software 47
Wireless USB Manager 41
USB
issues 68
USB 2.0 (2) (USB Sleep and Charge
ports) 15
USB cable connection
set up 28
USB devices
charging 56
connecting 31
USB Multi-Channel Audio Utility
using 45
using
dynadock™ software 37
Download from Www.Somanuals.com. All Manuals Search And Download.
|