Toshiba DVD VCR Combo SD KV550SU User Manual

Introduction

Connections

DVD VIDEO PLAYER & VIDEO

CASSETTE RECORDER

Basic setup

(VCR)

Playback

(VCR)

SD-KV550SU

Recording

(VCR)

OWNER’S MANUAL

Other functions

(VCR)

Basic playback

(DVD)

Advanced

playback

(DVD)

Function setup

(DVD)

Others

This device does not tape-record copy protected DVD Video Discs.

2I30201B-En_cov

1/13/06, 2:46 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a soft dry cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause

hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool.

PORTABLE CART WARNING

(symbol provided by RETAC)

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation,

to ensure reliable operation of the unit, and to protect it from overheating.

S3125A

These openings must not be blocked or covered. The openings should never be blocked by placing the unit

on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat

source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided and/or the manufacturer’s instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not

sure of the type of power supply to your home, consult your appliance dealer or local power company.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point

where they exit from the appliance.

2I30201B-En_p02-13

1/13/06, 2:46 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

IMPORTANT SAFEGUARDS

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the

unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,

as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short

out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is

grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the

National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for

the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC SERVICE

GROUNDING CONDUCTORS

EQUIPMENT

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC-NATIONAL ELECTRICAL CODE

S2898A

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

For example:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that

are covered by the operating instructions, as an improper adjustment of other controls may result in damage

and will often require extensive work by a qualified technician to restore the unit to its normal operation.

e. If the unit has been dropped or the cabinet has been damaged.

f . When the unit exhibits a distinct change in performance, this indicates a need for service.

2I30201B-En_p02-13

1/13/06, 2:46 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS / Power source

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by

the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to

determine that the unit is in proper operating condition.

21. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

22. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

23. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from

the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other

equipment carefully and follow the instructions when making any connections.

24. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the

laser beam. It may cause sight damage.

25. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious

personal injury and product malfunction.

26. NOTE TO CABLE TV SYSTEM INSTALLER

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-

nected to the grounding system of the building, as close to the point of cable entry as practical.

WARNING

Handling the cord on this product or cords associated with accessories sold with this product, will expose

you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.

Wash hands after handling.

Power source

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert

AC Outlet

the AC cord plug into a standard 120V 60Hz polarized AC outlet.

Wider Hole

and Blade

Notes:

Never connect the AC line cord plug to other than the specified

voltage (120V 60Hz). Use the attached power cord only.

If the polarized AC cord does not fit into a non-polarized AC

outlet, do not attempt to file or cut the blade. It is the user’s

responsibility to have an electrician replace the obsolete outlet.

If you cause a static discharge when touching the unit and the

unit fails to function, simply unplug the unit from the AC outlet

and plug it back in. The unit should return to normal operation.

•

Polarized AC Cord Plug

(One blade is wider than the other.)

2I30201B-En_p02-13

1/13/06, 2:46 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Precautions

Notes on handling

Note on moisture condensation

When shipping the DVD/VCR, the original shipping

carton and packing materials come in handy. For

maximum protection, repack the unit as it was

originally packed at the factory.

Do not use volatile liquids, such as insect spray, near

the DVD/VCR. Do not leave rubber or plastic

products to contact the DVD/VCR for a prolonged

period. They will leave marks on the finish.

The top and rear panels of the DVD/VCR may

become warm after a long period of use. This is not a

malfunction.

Moisture condensation damages the DVD/VCR.

Please read the following carefully.

Moisture condensation occurs, for example, when you

pour a cold drink into a glass on a warm day. Drops of

water form on the outside of the glass. In the same way,

moisture may condense on the head drum or the optical

pick-up lens inside this unit, one of the most crucial

internal parts of the DVD/VCR.

Tape

When the DVD/VCR is not in use, be sure to remove

the disc and the video cassette turn off the power.

If you do not use the DVD/VCR for a long period, the

unit may not function properly in the future. Turn on

and use the DVD/VCR occasionally.

Head drum

Moisture condensation occurs during the

following cases.

Notes on locating

When you bring the DVD/VCR directly from a cold

place to a warm place.

Place the DVD/VCR on a level surface. Do not use it

on a shaky or unstable surface such as a wobbling

table or inclined stand. The loaded disc or the video

tape may become dis-aligned and damage the DVD/

VCR.

When you place this DVD/VCR near a TV, radio, or

VCR, the playback picture may become poor and the

sound may be distorted. In this case, place the DVD/

VCR away from the TV, radio or VCR.

When you use the DVD/VCR in a room where you

just turned on the heater, or a place where the cold

wind from the air conditioner directly hits the unit.

In summer, when you use the DVD/VCR in a hot and

humid place just after you move the unit from an air

conditioned room.

When you use the DVD/VCR in a humid place.

Notes on cleaning

Use a soft, dry cloth for cleaning.

Use a dry cloth to wipe.

Do not use any type of solvent, such as thinner and

benzine, as they may damage the surface of the

DVD/VCR.

If you use a chemical saturated cloth to clean the unit,

follow that product’s instructions.

Do not use the DVD/VCR when moisture

condensation may occur.

If you use the DVD/VCR in such a situation, it may

damage discs and internal parts. Remove the disc or

the video tape, connect the power cord of the DVD/

VCR to the wall outlet, turn on the DVD/VCR, and

leave it for two or three hours. After two or three

hours, the DVD/VCR will have warmed up and

evaporated any moisture. Keep the DVD/VCR

connected to the wall outlet and moisture

condensation will seldom occur.

2I30201B-En_p02-13

1/13/06, 2:46 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on discs

On handling discs

Structure of disc contents

Do not touch the playback side of the disc.

Normally, DVD video discs are divided into titles, and the

titles are sub-divided into chapters. VIDEO CDs and

audio CDs are divided into tracks.

DVD video disc

Title 1

Title 2

Chapter 1 Chapter 2

Chapter 1 Chapter 2 Chapter 3

Playback side

Do not attach paper or tape to discs.

Video CD/Audio CD

Track 1

Track 2

Track 3

Track 4

Track 5

On cleaning discs

Fingerprints and dust on the disc cause picture and

sound deterioration. Wipe the disc from the center

outwards with a soft cloth. Always keep the disc

clean.

Each title, chapter or track is assigned a number, which

is called “title number”, “chapter number” or “track

number” respectively.

There may be discs that do not have these numbers.

Notes on copyright

The unauthorized recording, use, distribution, or revision

of television programs, videotapes, DVDs and other

materials, is prohibited under the Copyright Laws of the

United States and other countries, and may subject you

to civil and/or criminal liability.

Do not use any type of solvent such as thinner,

benzine, commercially available cleaners or antistatic

spray for vinyl LPs. It may damage the disc.

This product incorporates copyright protection

technology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright

protection technology must be authorized by

Macrovision, and is intended for home and other limited

viewing uses only unless otherwise authorized by

Macrovision. Reverse engineering or disassembly is

prohibited.

Consumers should note that not all high definition

television sets are fully compatible with this product and

may cause artifacts to be displayed in the picture. In

case of 525 progressive scan picture problems, it is

recommended that the user switch the connection to the

“STANDARD DEFINITION” output. If there are questions

regarding our TV set compatibility with this model 525p

DVD player, please contact our customer service center.

On storing discs

Do not store discs in a place subject to direct sunlight

or near heat sources.

Do not store discs in places subject to moisture and

dust such as a bathroom or near a humidifier.

Store discs vertically in a case. Stacking or placing

objects on discs outside of their case may cause

warping.

2I30201B-En_p02-13

1/13/06, 2:46 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Notes on discs (Continued)

About this owner’s manual

Playable discs

This owner’s manual explains the basic instructions of

this DVD/VCR. Some DVD video discs are produced in

a manner that allows specific or limited operation during

playback. As such, the DVD/VCR may not respond to all

operating commands. This is not a defect in the DVD/

VCR. Refer to instruction notes of discs.

This DVD/VCR can play the following discs.

Maximum

playback time

Disc

Size

Disc Mark Contents

Approx. 4 hours

(single sided disc)

12 cm

The following symbol may appear on the TV screen

during operation.

Audio

Video

(moving

pictures)

Approx. 8 hours

(double sided disc)

DVD

video

discs

Approx. 80 minutes

(single sided disc)

It means that the operation is not permitted by the DVD/

VCR or the disc.

8 cm

For example, sometimes it is unable to stop the

playback of copyright message of the disc when the

STOP ( ) button is pressed. Alternatively, this symbol

may also indicate that the feature is not available for the

disc.

Approx. 160 minutes

(double sided disc)

Approx. 74 minutes

Approx. 20 minutes

12 cm

Audio

Video

(moving

pictures)

Video

CDs

Notes on region numbers

DIGITAL VIDEO

8 cm

The region number of this DVD/VCR is 1. If region

numbers, which stand for their playable area, are printed

ALL

on your DVD video disc and you do not find

disc playback will not be allowed by the player. (In this

case, the DVD/VCR will display a message on-screen.)

Approx. 74 minutes

Approx. 20 minutes

12 cm

Audio

CDs

Audio

8 cm

(CD

single)

On Video CDs

The following discs are also available.

DVD-R/RW discs of DVD video format

CD-R/CD-RW discs of CD-DA, Video CD, SVCD,

MP3, WMA or JPEG format

This DVD/VCR supports Video CDs equipped with the

PBC (Version 2.0) function. (PBC is the abbreviation of

Playback Control.) You can enjoy two playback

variations depending on types of discs.

Kodak Picture CD and FUJICOLOR CD format

Some of these discs may be incompatible.

• Video CD not equipped with PBC function

(Version 1.1)

Sound and movie can be played on this DVD/VCR in

the same way as an audio CD.

• Video CD equipped with PBC function

(Version 2.0)

In addition to operation of a Video CD not equipped

with the PBC function, you can enjoy playback of

interactive software with search function by using the

menu displayed on the TV screen (Menu Playback).

Some of the functions described in this owner’s

manual may not work with some discs.

• You cannot play discs other than those listed above.

• You cannot play discs of DVD-RAM, DVD-ROM, Photo

CD, etc., or non standardized discs even if they may be

labeled as above.

• Some CD-R/RWs cannot be played back depending on

the recording conditions.

• This DVD/VCR uses the NTSC color system, and cannot

play DVD video discs recorded in any other color system

(PAL, SECAM, etc.).

Because of problems and errors that can occur during

the creation of DVD and Video CD software and/or the

manufacture of DVD and Video CD discs, Toshiba

cannot guarantee that this DVD/VCR will play every

feature of every DVD bearing the DVD logo and/or

every Video CD bearing the CD logo.

As one of the creators of DVD technology, Toshiba DVD

players are manufactured using the highest standards

of quality, and as a result, such incompatibilities are

rare. If you happen to experience any difficulty playing a

DVD or a Video CD on this DVD/VCR, please feel free

to call our Contact listed in “How to Obtain Warranty

Services”

is a trademark of DVD Format/Logo Licensing

Corporation.

2I30201B-En_p02-13

1/13/06, 2:46 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Introduction

Basic playback (DVD)

SAFETY PRECAUTIONS ................................2

IMPORTANT SAFEGUARDS ..........................3

Power source ...................................................5

Precautions ......................................................6

Notes on discs..................................................7

Contents...........................................................9

Identification of controls .................................10

Playing a disc ................................................. 42

Advanced playback (DVD)

Zooming ......................................................... 45

Locating desired scene .................................. 45

Marking desired scenes ................................. 46

Repeat playback............................................. 47

A-B Repeat playback...................................... 47

Program playback .......................................... 48

Random playback........................................... 48

Changing angles ............................................ 49

Title selection ................................................. 49

DVD menu ...................................................... 49

Changing soundtrack language ..................... 50

Setting surround sound .................................. 50

Subtitles ......................................................... 51

To turn off the PBC......................................... 51

MP3/WMA/JPEG and Audio CD

Connections

Antenna connections......................................14

Cable TV connections ....................................16

Connecting to a TV ........................................18

Connecting to optional audio equipment........20

Basic setup (VCR)

Setting the video channel............................... 22

Setting the language ...................................... 23

Clock setting................................................... 24

Tuner setting .................................................. 27

operation ........................................................ 52

Function setup (DVD)

Playback (VCR)

Customizing the function settings .................. 57

Temporary disabling of rating level by

DVD disc ........................................................ 63

Loading and unloading a cassette tape ......... 29

Cassette tape playback .................................. 30

Special playback ............................................ 31

Convenience function..................................... 32

Others

Language code list ......................................... 64

Troubleshooting ............................................. 65

Specifications ................................................. 66

Limited warranty............................................. 67

Recording (VCR)

Recording a TV program ................................ 34

One-touch Timer Recording (OTR) ................ 36

Timer recording .............................................. 37

Other functions (VCR)

Stereo recording and playback ...................... 39

Second Audio Program (SAP)........................ 39

Duplicating a video tape ................................. 40

Recording a DVD/CD disc.............................. 41

2I30201B-En_p02-13

1/13/06, 2:46 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Identification of controls

See the page in

for details.

Front panel

VCR/DVD mode selector

button

OPEN/CLOSE button 42

DVD mode indicator

REC button

FWD button

Disc tray 42

ON/STANDBY button

Cassette loading slot

Remote sensor

VCR mode indicator

PLAY button

STOP button

EJECT

button

REV button

CHANNEL

buttons

Display window

AUDIO (L/R)/VIDEO IN

(LINE IN 2) jacks

Rear panel

DVD COAXIAL DIGITAL AUDIO OUT jack

DVD/VCR common AUDIO

(L/R)/VIDEO OUT jacks 18

ANT IN jack 14

DVD S-VIDEO OUT jack 19

AC power cord

DVD COMPONENT DVD AUDIO (L/R) AUDIO (L/R)/VIDEO

ANT OUT jack 14

OUT jacks

IN (LINE IN1) jacks

2I30201B-En_p02-13

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Display window

Play indicator

VCR indicator (VCR)

Still indicator

DVD disc inserted indicator

Recording

indicator

(VCR)

CD inserted

indicator

Multifunctional indicator

Track indicator (CD)

Progressive indicator

AM/PM indicator

(AM is not displayed)

Tape loaded indicator (VCR)

Timer Recording indicator (VCR)

VCR operation status

Press CALL to display VCR operation status on the screen.

To cancel the display, press CALL again.

VCR Icons

Recording :

Rec/Pause

While watching TV

DAY OF THE WEEK

CLOCK

While operating a tape

HI-FI STEREO

OPERATING

MODE

8 : 47AM MON

STEREO SAP

CH 125

8 : 30AM MON

HI-FI

CHANNEL

Play :

Stop :

Eject :

STEREO AND

SECOND

AUDIO

AUTO REPEAT

TAPE IN

00 : 00 : 00 SP

STEREO

00 : 15 : 12 SP

PROGRAM

(SAP)

TAPE SPEED

REAL TIME COUNTER

OUTPUT SELECTION

Disc operation status

Press DISPLAY, the status display of the disc will appear on the screen as follows.

To cancel the display, press DISPLAY again.

DVD

VCD

TOTAL

TIME

ELAPSED

TIME

ELAPSED TOTAL

TIME TIME

DISC OPERATION

TITLE NO.

VCD

00:08:32 00:51:03

DVD

00:15:25 01:41:39

Chapter 2/24

1/2 Eng

CHAPTER

NO.

Track 3/15

Title 1/3

1/1 Eng Dolby Digital

1/1

ANGLE NO.

SUBTITLE LANGUAGE

A KIND OF AUDIO

TRACK NO.

AUDIO LANGUAGE

2I30201B-En_p02-13

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Identification of controls (Continued)

The instructions in this manual describe the functions on the remote control. See the page in

for details.

Remote control

POWER button

VCR DVD button 22

OPEN/CLOSE button (DVD)

EJECT button (VCR)

CLOCK/COUNTER button

TV/VCR button

VCR MENU button

SETUP button

INPUT SELECT button

SLOW button

31 44

CM SKIP button 31

ZOOM button 45

DVD MENU button 49

ENTER button

TOP MENU button 49

23 57

(

)

Direction buttons

SET+/

CH+/

buttons

buttons 34

CANCEL button

CLEAR button

RETURN button

STOP button

30 42

PLAY button

30 42

PAUSE/STEP button

31 43

INDEX+ button 33

INDEX

button

SKIP

button

FWD button

30 44

REV button

30 44

34 36

A-B RPT button

SP/SLP button

REC/OTR button

TIMER REC button

PLAY MODE button

Direct channel

Selection buttons (0

Number buttons (0

CALL button

DISPLAY button

-9)

ZERO RETURN button 32

JUMP button

COUNTER RESET button

ANGLE button

MARKER button

AUDIO SELECT button

ATR button 31

AUDIO button

SUBTITLE button 51

DVD MENU button

Use the DVD MENU button to display the menu

included on many DVD video discs. To operate a menu,

follow the instructions in “DVD Menu.”

2I30201B-En_p02-13

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting batteries

Open the battery compart-

ment cover in the direction of

the arrow.

Install two “AAA” batteries

(supplied), paying attention to the

polarity diagram in the battery

compartment.

Replace the compartment

cover.

Caution:

Never throw batteries into a fire.

Notes:

• Be sure to use AAA size batteries.

• Dispose of batteries in a designated disposal area.

•

Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with

applicable laws and regulations.

• If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with

new ones.

• When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix

battery types or use new and used batteries in combination.

• Always remove batteries from remote control if they are dead or if the remote control is not to be used for an

extended period of time. This will prevent battery acid from leaking into the battery compartment.

Remote control basics

• Press POWER to turn the DVD/VCR on or off.

• Select your desired operating mode (DVD or VCR) using VCR DVD.

(DVD or VCR indicator on the front panel will show you which mode is selected.)

• Press CH + or CH – to move through the channels one channel at a time.

• The

are also used to navigate on-screen menu system.

• You can directly access specific channels using Direct channel selection buttons (0–9).

• Each press of VCR DVD on the remote control, switches the screen between the VCR screen (VCR mode) and the

DVD screen (DVD mode).

Operation

• Aim the remote control at the remote sensor and press control buttons to

operate.

• Operate the remote control within 30° angle on either side of the remote

sensor, up to a distance of approx. 7 meters.

Approx. 7 meters

2I30201B-En_p02-13

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Antenna connections

If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page

the proper connections.

for

Antenna to DVD/VCR connection

The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and

connect it to the DVD/VCR.Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna

system to a DVD/VCR. Find the type of antenna system you are using and follow the connection diagram.

Combination VHF/UHF Antenna with 75 ohm Coaxial Cable

DVD/VCR

75 ohm Coaxial Cable

Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire

DVD/VCR

Matching Transformer 300 ohm Input 75

ohm output (not supplied)

300 ohm Twin Lead (Flat) Wire

(not supplied)

DVD/VCR

Separate VHF and UHF Antennas

Combiner 75/300 ohm Inputs 75 ohm output

(not supplied)

300 ohm Twin Lead (Flat) Wire

(not supplied)

UHF

VHF

75 ohm Coaxial Cable

Note:

If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs and

one 75 ohm output.

Notes: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to

the DVD/VCR properly.

• For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor type

antenna is required.

• If you are not sure about the connection, please refer to qualified service personnel.

2I30201B-En_p14-17

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD/VCR to TV connection

After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.

Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the

connection diagram.

This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna

inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.

Note: If a VHF or UHF antenna is used,

set the TV/CABLE menu option to

the “TV” mode.

VHF/UHF IN

75 ohm Coaxial Cable (supplied)

TV with single 75 ohm VHF/UHF antenna

input

Note: If a VHF or UHF antenna is used,

set the TV/CABLE menu option

to the “TV” mode.

Splitter 75 ohm Input

75/300 ohm outputs

(not supplied)

UHF

VHF

75 ohm Coaxial Cable

(supplied)

TV with 300 ohm UHF and 75 ohm VHF

antenna inputs

Note: If a VHF or UHF antenna is used,

set the TV/CABLE menu option to

the “TV” mode.

UHF

Splitter 75 ohm Input

300 ohm outputs

(not supplied)

75 ohm Coaxial Cable

(supplied)

VHF

TV with 300 ohm UHF and 300 ohm VHF

antenna inputs

2I30201B-En_p14-17

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Cable TV connections

Many cable companies offer services permitting reception of extra channels including pay or subscription channels.This

DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company

supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a

premium channel which is scrambled, you must have a descrambler box for proper reception.

DVD/VCR

VHF/UHF

IN (ANT)

Incoming Cable

Allows: Recording of nonscrambled channels.

Use of the programmable timer.

Recording of one channel while watching another.

DVD/VCR

Converter/

Descrambler

VHF/UHF

IN (ANT)

Incoming

Cable

Allows: Recording of channels through the converter box

(scrambled and unscrambled).

Using the programmable timer to record only the

channel selected at the converter box.

Note:

To record from converter/descrambler, DVD/

VCR tuner must be tuned to the converter

output channel, usually channel 3 or 4.

Prevents: Recording one channel while watching another.

Using the DVD/VCR tuner to select channels.

DVD/VCR

VHF/UHF

IN (ANT)

Converter/Descrambler

Incoming Cable

Allows: Recording of nonscrambled channels.

Note:

Use of the programmable timer.

Recording an unscrambled channel while watching

any channel selected at the converter box.

If you are playing a tape or using the tuner

built into the DVD/VCR, the converter must

be set to the video channel output of the DVD/

VCR (either 3 or 4).

Prevents: Recording scrambled channels.

Note: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to the output of

the Converter/Descrambler box, usually channel 3 or 4.

2I30201B-En_p14-17

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode.

This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scram-

bled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Con-

sult your local cable company for more information concerning connection to their descrambler equipment. There are

many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.

DVD/VCR

Splitter

A/B Switch

VHF/UHF

IN (ANT)

Incoming Cable

Converter/Descrambler

Allows: Recording of one channel while watching another.

Using the programmable timer to record only the channel selected at the converter box.

Recording of all channels through the converter box.

Prevents: Watching scrambled channels while recording another channel.

Using the DVD/VCR tuner to select channels.

DVD/VCR

Splitter

VHF/UHF

IN (ANT)

A/B Switch

Converter/Descrambler

Incoming Cable

Allows:

Recording of nonscrambled channels.

Recording of one channel while watching another.

Watching premium channels through the converter while recording nonscrambled channels.

Using the programmable timer.

Prevents: Recording scrambled channels.

DVD/VCR

Converter/Descrambler

Splitter

VHF/UHF

IN (ANT)

A/B Switch

Converter/Descrambler

Incoming Cable

Allows: Recording of all channels through the converter box.

Recording a scrambled or unscrambled channel while watching another (scrambled or

unscrambled) channel.

Using the programmable timer to record only the channel selected at the converter box.

Prevents: Using the DVD/VCR tuner to select channels.

2I30201B-En_p14-17

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Connecting to a TV

Connect the DVD/VCR to your TV.

Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you to

connect the S-video or ColorStream^®component video outputs to your TV/monitor also.

Basic connection

Signal flow

(yellow) (red) (white)

To VIDEO

OUT

To ANALOG AUDIO OUT

To wall outlet

Audio/video cable (supplied)

To audio inputs

(white)

To video input

(red)

(yellow)

TV or monitor with

audio/video inputs

Notes:

• Refer to the owner’s manual of the connected TV as well.

• When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before

making any connections.

• If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not

supplied) and then connect to your TV.

• Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector, the

playback picture may be distorted as DVD video discs are copy protected.

2I30201B-En_p18-25

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

S-video output

An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television

has S-Video input, and does not have component video inputs.

Component video outputs

PROGRESSIVE outputs

Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned

video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.

INTERLACED outputs

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest

quality DVD picture playback.

Notes:

• To switch the scan mode between the interlace and progressive modes, see page

• In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a

case, adjust the TV or monitor for optimum performance.

Connecting to an audio system andTV equipped with S-video input/component video inputs

The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced DVD

video picture performance.

Signal flow

To ANALOG

AUDIO OUT

(white)

To S-VIDEO

OUT

(red)

If you connect the DVD/VCR to

your TV with the DVD OUT jacks,

To wall outlet

select the corresponding video

input on your television to watch

DVD video discs.

• Actual labels for

component video

inputs may vary

depending on the

TV manufacturer

(ex.Y, R-Y, B-Y or

Y, CB, CR).

To PR/CR

VIDEO

OUT

To PB/CB

VIDEO

OUT

To Y

VIDEO

OUT

Audio cable (not supplied)

To audio inputs of

the amplifier

To Y video input

(white)

(red)

Component

video cable

To PB/CB video input

(not supplied)

To PR/CR video input

S-video cable (not supplied)

To S-video input

Audio system

TV or monitor with

component video inputs

Notes:

• Refer to the owner’s manual of the connected equipment as well.

• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the

wall outlet before making any connections.

• If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/

VCR away from the tuner and radio.

• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, the

speakers may be damaged.

• When connecting to a TV using the S-video jack, make sure that the Progressive indicator “ ” on the display

window is not lit. If it is lit, the S-video outputs do not feed the correct signals and you cannot see any picture.

To turn off the Progressive indicator, select Interlaced output

2I30201B-En_p18-25

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Connecting to optional audio equipment

You can enjoy high quality dynamic sounds of DVD video discs or

audio CDs by connecting the DVD/VCR to optional audio

equipment.

• This selection uses the following reference mark.

: Front speaker

: Rear speaker

: Sub woofer

: Center speaker

: Signal flow

Connection for video signal to your TV, see

18 19

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the

home.You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic

sound by connecting the DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro

Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks,

as well as from titles with the Dolby Surround mark.

Manufactured under license from

Dolby Laboratories. “Dolby”, “Pro

Logic” and the double-D symbol

are trademarks of Dolby

Laboratories.

Amplifier equipped with a

Dolby Digital decoder

• Use DVD video discs encoded

via the Dolby Digital recording

system.

To COAXIAL

type digital

audio input

75 Ω coaxial cable (not supplied)

To COAXIAL DIGITAL

AUDIO OUT

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left

front speakers, a center speaker, and one or two rear speakers).

With an amplifier equipped with Dolby Digital

Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to

that amplifier’s owner’s manual and set the amplifier so that you can enjoy Dolby Surround Pro Logic sound.

With an amplifier not equipped with Dolby Digital

Connect the equipment as follows.

• This connection is only suitable for Video CDs and Audio CDs.

Connect one or two rear speakers.

The output sound from the rear

speakers will be monaural even if you

connect two rear speakers.

Amplifier equipped with

Dolby Surround Pro Logic

To audio input

To ANALOG

AUDIO OUT

Audio cable (not supplied)

Connecting to an amplifier equipped with a DTS decoder

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.

If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs

or audio CDs.

“DTS” and “DTS Digital Out” are

trademarks of Digital Theater

Systems, Inc.

Amplifier equipped with a

DTS decoder

• Use DVD video discs or

audio CDs encoded via the

DTS recording system.

To COAXIAL

type digital

audio input

To COAXIAL DIGITAL

AUDIO OUT

75 Ω coaxial cable (not supplied)

2I30201B-En_p18-25

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning

When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo

jacks.To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/

R) jacks of the DVD/VCR are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) wires

dangling.) To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must

be connected to the COAXIAL DIGITAL AUDIO OUT jack of the DVD/VCR.

Connecting to an amplifier equipped with an MPEG2 audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound

by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

• Use DVD video discs

encoded via the MPEG2

recording system.

Amplifier equipped with an

MPEG2 audio decoder

To COAXIAL

type digital

audio input

To COAXIAL DIGITAL

AUDIO OUT

75 Ω coaxial cable (not supplied)

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker

system (right and left front speakers).

Amplifier equipped with a

digital audio input

To COAXIAL

type digital

To COAXIAL DIGITAL

audio input

AUDIO OUT

75 Ω coaxial cable (not supplied)

Notes:

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD/VCR to the AC-3 RF input of a Dolby Digital Receiver.

This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO

OUT jack of the DVD/VCR.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD/VCR to the “COAXIAL” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment as well.

• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the

wall outlet before making any connections.

• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate

listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier’s power on, the

speakers may be damaged.

2I30201B-En_p18-25

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic setup (VCR)

POWER

VCR DVD

TV/VCR

Setting the video channel

When a TV is connected with the 75 ohm coaxial cable only.

To view playback of a recorded tape or DVD disc, or to watch a

program selected by the VCR's channel selector, the TV must be set to

channel 3 or 4 (video channel).

Setting the video channel

For a push-button TV tuner

Press and hold 3 or 4 on the remote for 3

seconds in standby mode.

If CH 3 or 4 corresponding to the video channel cannot

be tuned on your TV, proceed as follows: set the VCR

3/4 channel selector and the TV to CH 3 or 4, play

back a prerecorded tape and tune the TV to receive a

sharp color picture from the video cassette recorder.

Refer to your TV owner's manual for details.

The video channel will

start to flash for 3

seconds in the display

window.

Note:

If the unit does not operate properly, or No key operation

(by the unit and/or the remote control): Static electricity, etc.,

may affect the player's operation.Disconnect the AC power cord

once, then connect it again.

Press POWER to turn on the DVD/VCR.

Press VCR DVD selector to select the VCR mode.

The VCR mode indicator

will light at the right of the

display window.

Turn ON the TV and set to CH 3 or 4 to corre-

spond with the channel selected in step 1.

Press TV/VCR to select the VCR position.

The VCR indicator will

appear at the upper left of

the display window.

Select any channel to receive a TV station in your area.

The channel number will appear on the screen for

about 4 seconds.

2I30201B-En_p18-25

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR DVD

Setting the language

VCR MENU

You can choose from three different languages (English,

French and Spanish) for the on-screen display.

ENTER

SET +/–

Setting the language

Preparation:

Press VCR MENU until the MENU screen is

cleared.

• Turn ON the TV and select to the corresponding

video input.

• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light.)

Press VCR MENU.

The VCR menu screen will appear.

Press SET + or – to select “SYSTEM

Notes:

SETUP”, then press ENTER.

If you use the unit for the first time,

press VCR MENU, instead of the

“SYSTEM SETUP” menu screen of

the main menu screen in step 2 may

appear.

• Both the VCR and the DVD have their own player menus

• If no buttons are pressed for more than 60 seconds, the VCR

MENU screen will return to normalTV-operation automatically.

⟨

⟩

Press SET + or – to select “LANGUAGE”, then

press ENTER.

⟨

⟩

Press SET + or – to select the desired language:

English (ENGLISH), Spanish (ESPAÑOL) or

French (FRANCAIS), then press ENTER.

⟨

⟩

2I30201B-En_p18-25

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic setup (VCR)

POWER

VCR DVD

Clock setting

VCR MENU

The AUTO CLOCK function will automatically set the built-in clock

(Month, Day, Year and Time) when the DVD/VCR is connected to an

Antenna or Cable system and it is turned off. The DVD/VCR searches

for a station in your area containing the necessary AUTO CLOCK setting

signals. Once received, it will take approximately 4 minutes for the clock

to set itself automatically.

ENTER

SET +/–

CALL

AUTO CLOCK setting

To set AUTO CLOCK to off

When shipped from factory the AUTO CLOCK is set to “ON”.

But if you do not want AUTO CLOCK setting, it can be turned off:

Preparation:

• Turn ON the TV and select the corresponding video input.

• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light.)

Press VCR MENU.

Connect the Antenna or Cable system.

• If you use a cable box, turn it on.

Plug the AC power cord to the AC outlet.

Press SET + or – to select “SYSTEM SETUP”,

then press ENTER.

Make sure the DVD/VCR is turned off.

• If you press POWER, the Auto Clock

set is not programmed.

Wait at least three minutes and press POWER.

Press SET + or – to select “AUTO CLOCK”.

Press CALL to check the clock setting on

the on screen display.

8 : 47AM MON

STEREO SAP

CH 125

00 : 00 : 00 SP

Press ENTER to select “OFF”.

If the clock is not set, check the antenna

condition. The AUTO CLOCK may not

function properly if the reception condition

is not good.

AUTO CLOCK adjustment

Press VCR MENU repeatedly to return to the

normal screen.

The AUTO CLOCK adjustment will be updated at

6:00 AM, 12:00 PM and 6:00 PM everyday when the

DVD/VCR turned off.

• If you use a cable box and you want AUTO CLOCK

adjustment to be performed, the cable box must be

left on.

• When the AUTO CLOCK is set to

“OFF”, the AUTO CLOCK adjust-

ment does not function.You must set

the clock manually

• The AUTO CLOCK adjustment is not effective when

there is a difference of more than 5 minutes exists

between the built-in clock time and the actual time.

2I30201B-En_p18-25

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

To set STANDARD TIME

To set DAYLIGHT SAVING TIME

In the rare event that you live within broadcast range of two You can set the DAYLIGHT SAVING TIME automatically or

stations in two different time zones, the DVD/VCR may manually.

recognize the wrong station for the AUTO CLOCK setting.

To correct the situation:

Press VCR MENU.

Press SET + or – to select “SYSTEM SETUP”,

then press ENTER.

Press SET + or – to select “SYSTEM SETUP”,

then press ENTER.

Press SET + or – to select “DAYLIGHT

SAVING TIME”, then press ENTER.

Press SET + or – to select “STANDARDTIME”

then press ENTER.

Press SET + or – to select one of the

options, then press ENTER. Press VCR

MENU until the MENU screen is cleared.

⟨

⟩

Press SET + or – to select your time zone,

then press ENTER.

for manual setting

(forward one hour)

for manual setting

(back one hour)

for automatic setting

(read XDS in the signal)

ON:

OFF:

AUTO:

ATLANTIC : GMT–4hours

EASTERN : GMT–5hours

CENTRAL : GMT–6hours

MOUNTAIN : GMT–7hours

When you want to set the DAYLIGHT

SAVING TIME manually, on the first

Sunday in April you set to “ON”, and

on the last Sunday in October you set

to “OFF”.

PACIFIC

ALASKA

HAWAII

AUTO

: GMT–8hours

: GMT–9hours

: GMT–10hours

: AUTO SET

(GMT: Greenwich Mean Time)

Press VCR MENU until the MENU screen is

cleared.

⟨

⟩

Notes:

• When shipped from factory, the DAYLIGHT SAVING TIME is

set to “AUTO” position.

• When the clock is not set, DAYLIGHT SAVING TIME setting

is not available.

• When there is no DAYLIGHT SAVING TIME in your area, al-

ways select “OFF” position in step 3.

Notes:

• To be able to select the standard time, the clock must first be

set by AUTO CLOCK once.

• If you live in Newfoundland and the AUTO CLOCK does not

function properly, set the AUTO CLOCK menu option to “OFF”

and set the clock manually.

2I30201B-En_p18-25

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic setup (VCR)

Clock setting (Continued)

VCR MENU

SET +/–

If the AUTO CLOCK process did not set the date and time correctly,

you must set them manually for timer recording and DAYLIGHT

SAVING TIME.

ENTER

CANCEL

Manual clock setting

After setting the clock, date and time starts

functioning automatically.

EXAMPLE: Setting the clock to “8:30 AM” March, 25

(SAT), 2006.

8 : 30AM SAT

Press VCR MENU.

Press SET + or – to select “SYSTEM SETUP”,

then press ENTER.

To make corrections any time during the process

Press CANCEL repeatedly until the item you want to

change blinks, then press SET + or –.

Note:

After a power failure or disconnection of the power, the timer

settings will be lost. In this case, reset the present time.

Press SET + or – to select “CLOCK SET”,

then press ENTER.

⟨

⟩

Press SET + or – to set the month, then press

ENTER.

MONTH

DAY

1 (WED)

YEAR

TIME

2006

12 : 00AM

⟨+/–/ENTER/CANCEL/MENU⟩

Set the day, year and time as in step 4.

MONTH

DAY

25 (SAT)

2006

YEAR

TIME

8 : 30AM

⟨+/–/ENTER/CANCEL/MENU⟩

2I30201B-En_p26-31

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR DVD

Tuner setting

VCR MENU

This DVD/VCR is equipped with a channel memory feature which allows

channels to skip up or down to the next channel set into memory,

skipping over unwanted channels. Before selecting channels, they must

be programmed into the DVD/VCR’s memory. In addition to normal

VHF and UHF channels, this DVD/VCR can receive up to 113 Cable

TV channels.To use this DVD/VCR with an antenna, set theTV/CABLE

menu option to theTV mode.When shipped from the factory, this menu

option is in the CABLE mode.

ENTER

SET +/–

TV/CABLE selection

Setting channels automatically

Preparation:

Repeat left step 1 and press SET + or – to

select “AUTO CH MEMORY”.

• Turn ON the TV and select to the corresponding

video input.

• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light.)

Press VCR MENU. Press SET + or – to select

“CH SETUP”, then press ENTER.

⟨

⟩

Press ENTER.

Auto tuning will begin.The channel dis-

play will count up and when finished,

the screen returns to normal.

Press SET + or – to select “TV/CABLE”.

Press ENTER to select the TV or CABLE

mode.

The arrow indicates the selected mode.

- VHF/UHF channels

CABLE - Cable TV channels

Press VCR MENU until the menu screen is

cleared.

Note:

You can’t select “CH SETUP” if you set the channel to “L1” or

“L2”.

2I30201B-En_p26-31

1/13/06, 2:47 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic setup (VCR)

Tuner setting (Continued)

VCR MENU

ENTER

SET +/–

0–9

To ADD/DELETE channels

Noise elimination

When you don't want to receive a weak signal broadcast, a Blue

back screen can be obtained by selecting the NO NOISE BACK-

GROUND to “ON”. When the unit is shipped from the factory,

the NO NOISE BACKGROUND is set to “ON”.

Repeat the step 1 on page

or – to select the “ADD/DELETE” and press ENTER.

. Then press SET +

Repeat the steps 1~2 on page

and press SET

+ or – to select “NO NOISE BACKGROUND”.

To Add or Delete channels

⟨

⟩

1) Press Direct channel selection buttons (0–9)

or SET +/– to select a channel number you want

to add or delete.

Press ENTER to select “ON” or “OFF” position.

2) To add channels

Press ENTER until “ADD” appears on the screen.

To delete channels

Press ENTER until “DELETE” appears on the

screen. The channel number will blink.

⟨

⟩

3) Repeat step 1 and 2 to add or delete other

channel.

Press VCR MENU until the menu screen is

cleared.

Press VCR MENU until the menu screen is

cleared.

2I30201B-En_p26-31

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback (VCR)

Loading and unloading a cassette tape

EJECT

Use only video cassette tapes marked

Insert the cassette tape with its labeled side facing up

and the erase prevention tab positioned at your left. An

inverted cassette tape cannot be inserted.

Push the center of the tape until it is automatically

inserted.

Erase prevention tab

Automatic power ON

When you insert a cassette tape, the DVD/VCR power will turn ON automatically.

Automatic playback

When loading a cassette tape without an erase prevention tab, playback will start automatically.

Unloading

Press EJECT on the front panel or on the remote.

Remove the cassette tape.

Automatic tape eject

ThisDVD/VCRwillautomaticallyrewindthetapewhenthetapehasended.Oncethetapeisrewoundtoitsbeginning,

the cassette tape will be ejected automatically.

To prevent accidental erasure

To record again

Remove the erase prevention tab with a screwdriver.

Cover the hole with a piece of adhesive tape.

Screwdriver

Erase prevention tab

Adhesive tape

Tape speed and maximum recording time

Video cassette tape

Tape Speed

T-160

2-2/3 hours

8 hours

T-120

2 hours

6 hours

T-90

T-60

T-30

SP (Standard Play)

SLP (Super Long Play)

1-1/2 hours

4-1/2 hours

1 hour

3 hours

30 minutes

1-1/2 hours

2I30201B-En_p26-31

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback (VCR)

VCR DVD

Cassette tape playback

To play a prerecorded tape.

STOP

PLAY

FWD

REV

Playback

Rewind or forward the tape

Preparation:

Stop the playback via STOP on remote control.

• Turn ON the TV and select the corresponding video input.

• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light).

To rewind the tape:

Press REV.

Load a prerecorded tape

(When loading a cassette tape without the erase

prevention tab, playback will start automatically).

To forward the tape:

Press FWD.

To start playback

Press PLAY.

Playback will start. “ ” will appear

on the screen for about 4 seconds.

To discontinue the tape-winding, press STOP. To switch to

playback directly (without STOP), press PLAY.

Forward/Reverse picture search mode

Whenthetapeisbeingwinded, youcanswitchtopicture

To stop playback

search mode (see page

). To do this, press REV or

Press STOP once.

FWD and hold it down. The unit will resume the tape

The tape will stop but remain fully

loaded and ready to play.

advance or rewinding as soon as the button is released.

“

” will appear on the screen for

about 4 seconds.

Notes:

• This VCR selects the playback tape speed SP, LP or SLP au-

tomatically.

• The Cassette tape and DVD disc can be played back simulta-

neously. If you press VCR DVD selector, the tape playback

and DVD playback alternate with each other on the screen

(via CH3, 4 or video connection).

2I30201B-En_p26-31

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

CM SKIP

SLOW

Special playback

SET +/–

PAUSE/STEP

PLAY

FWD

REV

ATR

Picture search

Adjusting tracking condition

Automatic tracking adjustment

Reverse picture search function

Press REV once or twice during playback.

Forward picture search function

Whenever you insert a tape and start playback, the

automatic tracking feature continuously analyzes the signal

to enable optimum picture quality during playback.

Press FWD once or twice during playback.

To return to playback, press PLAY.

Manual tracking adjustment

SPEED SEARCH TIMES

If automatic tracking cannot eliminate noises well during

playback, press SET +/– to eliminate the noise. “MANUAL

TR.” will appear on the screen. Press it once for a fine

adjustment, or press and hold for a coarse adjustment.

PICTURE SEARCH SPEED

TAPE SPEED

PRESS ONCE

PRESS TWICE

SP (Standard Play)

LP (Long Play)

3 X

7 X

9 X

5 X

9 X

Press ATR to reactivate automatic tracking again.

“AUTO TR.” will appear on the screen.

SLP (Super Long Play)

15 X

Still picture

Press PAUSE/STEP during playback.

To resume normal playback, press PLAY or PAUSE/STEP.

Notes:

•

Theaudiooutputismutedduring PICTURE SEARCH, STILL

PICTURE SLOW MOTION and FRAME BY FRAME

PICTURE.

Slow motion

During playback press SLOW.

To return to playback, press PLAY or SLOW.

• During picture search mode there will be noise bars. This is

not a defect.

• Playback will commence after approx. 5 minutes to protect

the video tape against excessive wear during pause mode.

Slow tracking and vertical lock adjustment

If noise bars appear in the picture during slow motion,

press the SET +/– to reduce the noise bars.

If the still picture jitters excessively, press SET +/– to

stabilize the still picture.

Video head cleaning

Video head clogging

The video heads are the means by

which the DVD/VCR reads the picture

from the tape during playback. In the

unlikely event that the heads become

dirty enough to be clogged, no picture

will be displayed. This can easily be

determined if, during playback of a

known good tape, there is good sound,

but no picture (picture is extremely

snowy). If this is the case, the DVD/

VCR need to check and clean by the

Frame by frame picture

Press PAUSE/STEP during playback.

Press SLOW repeatedly. The picture advances frame by

frame.

Good Picture

To return to playback, press PLAY or PAUSE/STEP.

CM skip

Press CM SKIP during playback. The DVD/VCR will search

forward through approximately 30 seconds of the tape (e.g.

unwanted commercial time) for each press of CM SKIP (maxi-

mum six presses) and then resume normal playback.

qualified service personnel.

Snowy Picture

Notes:

DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR

•

SERVICETHE UNIT BY REMOVINGTHE REAR COVER.

Video heads may eventually wear out and should be re-

placed when they fail to produce clear pictures.

To help prevent video head clogging, use only good qual-

ity VHS tapes. Discard worn out tapes.

•

For example : 1 press: 30 seconds of tape

2 press: 60 seconds of tape

3 press: 90 seconds of tape

2I30201B-En_p26-31

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback (VCR)

CLOCK/COUNTER

VCR MENU

Convenience function

SET +/–

ENTER

STOP

PLAY

CALL

ZERO RETURN

COUNTER RESET

Repeat playback

Zero return function

The entire video tape will play until its end. The tape will

automatically rewind to the beginning and the playback will be

repeated.

This function rewinds the tape to the “00:00” counter position

automatically.

Press CLOCK/COUNTER.

Press VCR MENU.

The counter display shows the tape run-

ning time during playback or recording.

Press SET + or – to select “AUTO

REPEAT”.

Press COUNTER RESET at the desired tape

position.

Press ENTER to select “ON” or “OFF”.

If “ON” is selected, the playback

will be repeated endlessly.

The counter display will be reset to

“00:00” position (e.g. the beginning of

recording).

Press STOP when playback or recording is

completed.

Press ZERO RETURN.

Press VCR MENU until the menu screen is

cleared.

To confirm whether AUTO REPEAT

function is turning ON or OFF, press

CALL. If “ ” is displayed, it is

The tape will automatically rewind or fast

forward to the “00:00” counter position.

turning ON

To commence playback, press PLAY.

The playback will be repeated

endlessly.

To cancel repeat mode:

Follow the above step 1, then press ENTER to select

“OFF” position. Press VCR MENU to return to the TV.

2I30201B-En_p32-37

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR DVD

CLOCK/COUNTER

STOP

INDEX

+/–

Clock/counter display

Video index search system

This function enables you to locate the beginning of any recording

made on the VCR.

Press CLOCK/COUNTER. The clock and tape counter

alternate with each other in the display window.

Recording an INDEX mark

The Index Search function auto-

maticallyrecordsanINDEXmark

onthetapewheneverarecording

is initiated.

COUNTER

Index search

Press INDEX + or – during stop or play mode.

For Succeeding programs: Press INDEX +.

For Preceding programs: Press INDEX –.

(As many as 9 index points can be accessed via this

method.)

CLOCK

WhentheINDEX+or–ispressed,

the unit starts searching the se-

lected INDEX NO. and finds the

portion. Then playback starts au-

tomatically. To stop the Index

Search, press STOP.

Press VCR DVD selector. The DVD mode and the

VCR mode alternate with each other in the display.

DVD mode

is displayed

INDEX NO. (up to 9)

Notes:

VCR mode

• When you record an INDEX mark at the very beginning of the

tape, the mark may not be found.

• During INDEX search, the tape may stop and begin to play at a

slightly different location.

• INDEX may not function properly with old or worn out video

tapes.

• INDEX marks may not be found if it is extremely close to the point

where the search began.

• During recording, if you stop recording temporarily, the INDEX

mark is not recorded on the tape.

Notes:

• If you rewind the tape beyond “00:00”, a minus sign (“–”) will

be displayed in front of the time.

• When you load a tape, the counter will reset to “00:00”.

• The counter does not function on non-recorded (blank)

sections of the tape. When you rewind, fast forward or play

tapes through blank sections, the counter stops.

SQPB (S-VHS Quasi Playback)

You can playback video cassette tapes recorded in the

S-VHS system.

However, the picture will not have the high resolution of

S-VHS system.

Note:YoucannotrecordS-VHSvideoformatwiththisVCR.

2I30201B-En_p32-37

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording (VCR)

VCR DVD

CH +/–

Recording a TV program

Recording and viewing the same TV program.

REC/OTR

SP/SLP

0–9

Recording a TV program

Preparation:

Press Number buttons or CH +/– to select the

channel to be recorded.

• Turn ON the TV and select to the corresponding

video input.

• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light.)

Load a cassette tape with the erase prevention

tab intact.

The DVD/VCR will automatically turn on.

TV mode direct channel selection:

All channels can be instantly selected by using two

buttons. (for example, to select channel 2, press “0”, then

“2”. If you press only “2”, channel selection will be delayed

for two seconds.) For channels 10 and above, press the 2

digits in order.

CABLE mode direct channel selection:

1-9

Press 0 twice and then 1-9 as required.

Example: To select “2”, Press 002.

Press 0 first and then the remaining 2 digits in

order from left to right.

10-12

Press SP/SLP to select the desired tape speed

SP or SLP.

Example: Press 012 for “12”.

13-99

Press 2 digits in order.

The tape counter and “SP” or “SLP”

will appear on the screen for about 4

seconds.

Example: Press 22 for “22”.

100-125 Press the 3 digits in order.

Example: Press 110 for “110”.

VHF/UHF/CABLE TV CHANNELS

CABLE TV

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) (W)

37-59 (AA) (WW)

60-85 (AAA) (ZZZ)

86-94 (86) (94)

95-99 (A-5) (A-1)

100-125 (100) (125)

01 (5A)

Select “TV” or “CABLE” to the appropriate

position

- VHF/UHF channels

CABLE - Cable TV channels

Press REC/OTR.

“

” will appear on the screen for

about 4 seconds and “REC” will

appear on the display window.

2I30201B-En_p32-37

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR

PAUSE/STEP

STOP

Recording one program while

watching another

To stop recording

Press STOP to stop recording.

While the VCR is recording, select your desired channel

on the TV.

“

” will appear on screen for about

4 seconds.

When a TV is connected with an antenna cable only,

press TV/VCR to select the TV position.

The “VCR” display will go off and recording will continue.

Select the TV channel you want to watch by using the

TV channel selector.

Note:

Some Cable TV hookups do not permit viewing one channel

while recording another. See pages

and

To stop recording temporarily

Press PAUSE/STEP to avoid recording unwanted

material. Press again to continue the recording.

“

” will appear on screen for

about 4 seconds.

Notes:

• The pause function will be released after 5 minutes to

prevent damage to the tape or the VCR. The VCR will

change to the STOP mode.

• You can select a recording channel in the recording

pause mode.

Auto Rewind feature

This VCR will automatically rewind the tape when the tape

has ended (except during OTR and timer recording). It will

also eject the tape.

2I30201B-En_p32-37

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording (VCR)

VCR DVD

CH +/–

One-touch Timer Recording (OTR)

The One-touch Timer Recording feature provides a simple and

convenient way to make a timed recording.

STOP

REC/OTR

SP/SLP

0–9

One-touch Timer Recording (OTR)

Preparation:

Press Direct channel selection buttons (0–9) or

CH +/– to select the channel to be recorded.

• Turn ON the TV and select to the corresponding

video input.

• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light.)

Example: One-touch Timer Recording for 30 minutes.

Load a cassette tape with the erase

prevention tab intact.

The VCR will automatically turn on.

Press REC/OTR. Recording begins. Press the

button again to stop recording after 30 minutes.

Each additional press of REC/OTR will increase

recording time as shown in the chart below, up

to a maximum of 6 hours.

Press

once

Recording time Press

NORMAL REC 6 times

Recording time

3:00

4:00

twice

0:30

1:00

1:30

2:00

7 times

8 times

9 times

10 times

Press SP/SLP to select the desired tape speed

5:00

3 times

4 times

5 times

SP or SLP.

6:00

NORMAL REC

The tape counter and “SP” or “SLP”

will appear on the screen for about 4

seconds.

The OTR and recording time will

appear on the screen for about 4

seconds, then change to “ ”.

Set “TV” or “CABLE” option to the

appropriate position

To cancel OTR

Press STOP or turn off the power.

- VHF/UHF channels

CABLE - Cable TV channels

“

” will appear on the screen for about 4 seconds.

Note:

If you wish to watch the DVD playback during OTR or standard

recording, press VCR DVD selector to change to DVD mode and

perform the DVD playback

2I30201B-En_p32-37

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR DVD

Timer recording

EJECT

VCR MENU

SET +/–

Timer recording can be programmed on-screen with the remote control.

The built-in timer allows automatic unattended recording of up to 8

programs within 1 month.

ENTER

CANCEL

TIMER REC

Timer recording

Preparation:

To enter other programs, repeat step 2

through 4.

• Press VCR DVD selector to select the VCR mode.

• Load a cassette tape with the erase prevention tab

intact.

• To return to the normal screen,

press VCR MENU twice.

• Check the time and date are correct

DATE

START END

Example: Program a timer recording for the 26th day,

channel 125 (Cable TV), 11:00 - 11:30 PM on timer program

number 1 (Tape speed: SLP).

2_—6_—(S_—A_—) _—1_——1:0_{: —}0P_—M 1_—1:3_{: —}0P_—M125 SLP

— —

—

— — — — — —— : — — — : — — — —

—

— — — — — —— : — — — : — — — —

—

Press VCR MENU. Select “TIMER REC SET”,

⟨+/—/ENTER/CANCEL/MENU⟩

then press ENTER.

Press TIMER REC. The timer symbol ( ) will

appear on the display and the VCR standbys

for recording.

At the same time, VCR mode will

change to DVD mode automatically.

You can use DVD even if the VCR is

in the timer recording mode. If you

do not use the DVD, turn the power

off.

Press SET + or – to select one of the program

line, then press ENTER.

Notes:

• The timer recording will start at 5 seconds before the

preset starting time.

• If the timer symbol (

when TIMER REC is pressed, the cassette is not inserted

) does not appear on the display

⟨

⟩

• If the cassette is ejected when TIMER REC is pressed, the

Press SET + or – to select the date, then press

ENTER.

erase prevention tab of the cassette may have been

DATE

26(SA)

START E_—N_:D_{— —}CH_—

removed

— : — —

— —

—

— — — — — —— : — — — : — — — —

—

— — — — — —— : — — — : — — — —

—

Notes:

—

• If the timer symbol ( ) blinks when the timer recording ended,

the TV program has not been completely recorded because of

an insufficient tape length. Press TIMER REC to cancel the

timer program or press EJECT to remove the cassette tape.

• Duringtimerrecordingstandbymode, theVCRmodecannotbe

operated. To use the VCR, first press TIMER REC, then press

VCR DVD selector to change to VCR mode. After VCR mode is

selected, press TIMER REC again to put the VCR into timer

recording standby mode.

—

⟨+/—/ENTER/CANCEL/MENU⟩

Set the start time, end time, channel and tape

speed as in step 3.

DATE

START END

2_—6_—(S_—A_—) _—1_——1:0_{: —}0P_—M 1_—1:3_{: —}0P_—M125 SLP

— —

—

• If you press TIMER REC during timer recording, the recording

operation will be interrupted. If you press TIMER REC again

within the programmed time, the recording operation will start

again.

• After a power failure or disconnection of the power plug, all

programmed recording settings and time display will be lost

— — — — — —— : — — — : — — — —

—

— — — — — —— : — — — : — — — —

—

⟨+/—/ENTER/CANCEL/MENU⟩

Notes:

• Press CANCEL to move cursor backward for correction.

• To record from external source set the channel to “L1” or

“L2”.

upon resumption of power. In this case, reset the clock

reprogram any timer recording.

and

2I30201B-En_p32-37

1/13/06, 2:48 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording (VCR)

VCR DVD

Timer recording (Continued)

VCR MENU

SET +/–

ENTER

CANCEL

TIMER REC

Setting procedure

To set daily/weekly timer

To confirm or cancel a program

Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-

SA: Monday to Saturday) Timer recording

Followtheprocedureoftimerrecordingonpage37.Atstep

3, press SET + or – repeatedly until the desired setting

appears. Then press ENTER.

If theTimer has been activated, press TIMER

REC to deactivate theTimer.

The timer symbol ( ) will

disappear. Then press VCR DVD

selector to change to VCR mode.

When you press SET – repeatedly, the

DATE indicator will change as follows, in

this case the day is Friday.

The current day (Friday)

SU-SA (Sunday to Saturday)

MO-SA (Monday to Saturday)

MO-FR (Monday to Friday)

WKL-TH (Weekly Thursday)

One month later

minus one day

To confirm Timer program:

At step 1 on page 37 select “TIMER REC SET” and

press ENTER.

The timer program list will appear on the screen.

WKL-WE

(Weekly Wednesday)

DATE

START END

26(SA) 11:00PM 11:30PM125SLP

⟨

⟩

⟨+/—/ENTER/CANCEL/MENU⟩

To cancelTimer program:

If the programs overlap another

Press SET + or – to select the unwanted program,

then press CANCEL to cancel the program.

Do not overlap timer programs as portions of the

conflicting programs will be lost. The first recording

time has priority over the next recording time as shown

in the diagram below.

8 : 00

9 : 00

10 : 00

11 : 00

Program 1

Program 2

⟨

⟩

Deleted Parts

Program 3

Press VCR MENU repeatedly until the menu

screen is cleared.

Non Recorded Portion Parts

Recording

Control Settings

Prog.1

Prog.2

Prog.3

Notes:

• The daily/weekly recording can be made continuously until the

recording is canceled or the tape reaches the end.

• During timer recording the automatic rewinding mechanism

does not function.

Notes:

• If there are other timer record programs remaining, TIMER

REC must be pressed to reactivate the timer, otherwise the

remaining timer record programs will be ignored.

• You cannot confirm the Timer program during timer recording

operation.

• You can correct or cancel a programmed setting in program

confirm mode.

2I30201B-En_p38-41

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Other functions (VCR)

VCR MENU

ENTER

Stereo recording and playback /

Second Audio Program (SAP)

SET +/–

AUDIO SELECT

Stereo recording and playback

Second Audio Program (SAP)

The VHS Hi-Fi audio system permits high fidelity record-

ing of MTS STEREO TV broadcasts.

Your DVD/VCR is fitted with a SAP broadcast system which

enables you to switch to a second audio program when view-

ing a selected channel.

This function applies only when the program is broadcast in

multi-languages through the SAP broadcast system.

When a MTS STEREO broad-

cast is received, “STEREO” will

STEREO

appearonthescreenforabout4

seconds and the program can

beviewedorrecordedinstereo.

The Hi-Fi stereo recording pro-

cedure is the same as for normal

recordings.

Press VCR MENU.Then press SET + or – to

select “SAP”.

Note:

WhenusingaCableTVsystem,stereoTVprogramsmay

be transmitted over a mono cable channel. In this case

“STEREO” will not appear and the sound will be in mono.

Press ENTER to select “ON”.

Then press VCR MENU until the

menu screen is cleared.

Output selection

When viewing an MTS stereo TV program, or playing a

prerecorded VHS Hi-Fi stereo videotape, press AUDIO

SELECT to select how the audio will be heard through

the speakers. Normally set to the Hi-Fi stereo position,

this button can be set to the MONO position if the stereo

broadcast or videotape audio is of poor quality. The “R”

and “L” positions allow the audio from the Right or Left Hi-

Fi channel to be heard over both TV speakers. This

button has no effect when viewing a MONO videotape or

TV program. Each time when you press the button,

OUTPUT SELECTION display appears on the screen for

several seconds. Refer to the chart below.

Listening to SAP

When the VCR is turned on or a channel selection is

made, make certain the letters “SAP” appears on the

screen for about 4 seconds.This means that the “Second

Audio Program” broadcasting is available.

OUTPUT

SOUND HEARD ON BOTH

SELECTION SPEAKERS

STEREO

L ch

R ch

STEREO

LEFT CHANNEL AUDIO

RIGHT CHANNEL AUDIO

MONO

Notes:

• When playing back a tape that is not recorded in Hi-Fi stereo

mode, the audio will automatically be monaural.

• When listening to a VHS Hi-Fi video tape or MTS broadcast

through the VHF/UHF jack (Audio/Video cable not connected),

the sound will be monaural.

2I30201B-En_p38-41

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Other functions (VCR)

VCR DVD

INPUT SELECT

Duplicating a video tape

If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate

a previously recorded tape. Make all connections before turning on the power.

STOP

SP/SLP

REC/OTR

Duplicating a video tape

Preparation:

Connection with second VCR

• Turn ON the TV and select the corresponding video

input.

Playback VCR

• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light.)

• Load a cassette tape with the erase prevention tab

intact.

• Load a previously recorded tape into the playback

VCR or Camcorder.

To VIDEO OUT

To AUDIO (R) OUT

To AUDIO (L) OUT

Press SP/SLP to select the desired tape speed

SP or SLP.

AUDIO/VIDEO cable (supplied)

It is recommended to set the

tape speed to the SP mode on the

recording VCR for best results.

Recording VCR

Press INPUT SELECT once or twice to select

AUDIO/VIDEO input position.

“L1” or “L2” will appear in the display.

To AUDIO (R) IN

To AUDIO (L) IN

To VIDEO IN

Connection with Camcorder

L1: on the rear panel

L2: on the front panel

Playback Camcorder

Press PLAY on the playback VCR or Camcorder.

To AV Jack

Recording VCR

Press REC/OTR on the recording VCR.

The duplicating process begins.

To AUDIO (R) IN

To AUDIO (L) IN

AUDIO/VIDEO cable (not supplied)

To VIDEO IN

Press STOP when you finish duplicating.

For duplicating a previously recorded tape from a

camcorder, follow the camcorder manufacturer’s

instructions. A typical camcorder dubbing hookup is

shown above.

2I30201B-En_p38-41

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR DVD

Recording a DVD/CD disc

You can record disc material in DVD, Audio CD, etc. onto a Video

tape with this DVD/VCR.

STOP

PLAY

SP/SLP

REC/OTR

Duplicating a DVD or CD disc

Notes:

Preparation:

• You may not be able to record the beginning of the disc.

Begin VCR recording once program playback commences

on the DVD.

• When the scanning mode is set to the progressive mode,

you cannot duplicate a disc material onto a video tape.

When REC/OTR is pressed, the PROGRESSIVE indicator

• Turn ON the TV and select the corresponding video

input.

• Press VCR DVD selector to select the VCR mode.

(The VCR mode indicator will light.)

Load a cassette tape with the erase prevention tab intact.

•

• Load a DVD/CD disc.

“

” on the display window will flash.

• You cannot record discs encoded with copy guard

function. The following icon and text will show up on the

TV screen.

Press SP/SLP to select the desired tape speed

SP or SLP.

DISC IS COPY PROTECTED

PressVCR DVD selector to select the DVD mode.

The DVD mode indicator will light.

Press PLAY to start playback.

Press REC/OTR to start recording.

The DVD/VCR will change to the

VCR mode automatically and the

playback picture or sound will be

duplicated on the video cassette

tape.

Press STOP when you finish recording.

If you wish to stop a DVD/CD disc,

press VCR DVD selector to change

the DVD mode, then press STOP.

2I30201B-En_p38-41

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic playback (DVD)

CAUTION

Playing a disc

Keep your fingers well clear of the disc tray as it is closing.

Neglecting to do so may cause serious personal injury.

This section shows you the basics on how to play a disc.

DVD

VCD

Basic playback

Preparations:

• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. This

may include S-video or component video inputs which are exclusive to DVD playback.

• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input

connected to the DVD/VCR.

Press ON/STANDBY.

Press OPEN/CLOSE or PLAY on the unit.

The DVD/VCR turns on.

The disc tray closes automatically.

On the TV-screen, “ ” changes to

“Reading” and then playback

commences.

• A menu screen will appear on the TV screen if

the disc has a menu feature.

Press VCR/DVD to select the DVD mode.

The DVD indicator will light.

Reading

Press OPEN/CLOSE.

The disc tray opens.

Press

to select title.

Press ENTER.

Place the disc on the disc tray.

• Title is selected and play

commences.

With the playback

side down

Press STOP to end playback.

• The unit records the stopped point,

depending on the disc. “

”

appears on the screen. Press

PLAY to resume playback (from

the scene point).

• If you press STOP again or unload

the disc (“ ” appears on the

screen.), the unit will clear the

stopped point.

• There are two different disc sizes. Place the disc

in the correct guide on the disc tray. If the disc is

out of the guide, it may damage the disc and

cause the DVD/VCR to malfunction.

• Do not place a disc which is unplayable in this

DVD/VCR.

To start playback in the stop mode

Press PLAY.

2I30201B-En_p42-45

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR DVD

POWER

To obtain a higher quality picture

Occasionally, some picture noise is not usually visible on the TV screen during a

normal broadcast while playing a DVD video disc. It is because due to high

resolution pictures on these discs which include a lot of information. The amount

of noise depends on the TV you use with this unit.You should generally reduce

the sharpness adjustment on your TV when viewing DVD video discs.

OPEN/CLOSE

C/D/B/A

ENTER

DVD VCD

About

The

STOP

DVD VCD

PLAY

icons on the heading bar show the playable discs for the

PAUSE/STEP

function described under that heading.

DVD

: You can use this function with DVD video discs.

: You can use this function with Video CDs.

: You can use this function with Audio CDs and CD-R/RW CDs.

Playing a Disc while the VCR section is recording

To pause playback (still mode)

or standing by for timer recording

Press PAUSE/STEP during playback.

1) Start to record.

Follow steps 1~5 on page

•If the DVD/VCR is standing by for recording, turn on

the DVD/VCR.

2) Press VCR DVD selector to select DVD mode.

3) Play a disc.

To resume normal playback, press

PLAY.

• The sound is muted during still

mode.

To stop playback

Press STOP.

Follow steps 3 ~ 5 on page

•Press PLAY if the DVD/VCR does not start to play a

disc automatically.

4) Stop playback.

Press STOP to stop playing a disc.

To remove the disc

Press OPEN/CLOSE.

Screen saver function

The screen saver operates when you leave the unit in

DVD stop mode for approx. five minutes.

The screen will repeatedly get dark gradually and back

Remove the disc after the disc tray

opens completely.

to normal.

Please press any button when you want to return to an

usual screen.

To turn on or off the screen saver, see page

Be sure to press OPEN/CLOSE to close the disc tray

after you remove the disc.

Notes:

• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen

according to the type of loaded disc. In this case, check your disc again

• Some discs may take a minute or so to start playback.

• When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,

“Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.

• Some discs may not work the resuming facility.

• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to

the disc contents the software producers designed, some playback features may not be available. Also refer to the

instructions supplied with the DVDs.

• Do not move the unit during playback. Doing so may damage the disc.

• Use the OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the

unit to malfunction.

• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to

malfunction.

• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press

POWER on your remote control once the movie is completed.

• There may be a slight delay between the button is pressed and the function activates.

2I30201B-En_p42-45

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic playback (DVD)

Playing a disc (Continued)

You can play discs at various speeds.

SLOW

PAUSE/STEP

PLAY

FWD

REV

SKIP

DVD

VCD

Playing in fast reverse or fast forward directions

To resume normal playback

Press PLAY.

Press REV or FWD during playback.

REV: Fast reverse playback

FWD: Fast forward playback

Notes:

• The DVD/VCR mutes sound and subtitles during reverse

and forward scan of DVD/VCD video discs. However, this

unit plays sound during fast forward or fast reverse play of

audio CDs.

Each time you press REV or FWD,

the playback speed changes.

• The playback speed may differ depending on the disc.

DVD

VCD

Playing frame by frame

To resume normal playback

Press PLAY.

Press PAUSE/STEP during still playback.

Each time you press PAUSE/STEP,

the picture advances one frame.

Note:

The sound is muted during frame by frame playback.

DVD

VCD

Playing in slow-motion

To resume normal playback

Press PLAY.

Press SLOW during playback.

Each time you press the button, the

slow-motion speed changes.

Note:

The sound is muted during slow-motion playback.

DVD

VCD

Locating a chapter or track

Press SKIP

repeatedly to display the chapter or track number you want.

Playback starts from the selected chapter or track.

To locate succeeding chapters or

tracks.

Playback starts from the beginning of the

current chapter or track.

When you press twice in quick successions,

playback starts from the beginning of the

preceding chapter or track.

Notes:

• A prohibition symbol may appear at the upper right of the screen.This symbol means either the feature you tried is not available

on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/VCR.

• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave

the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent

damage to your television screen. Projection televisions are very susceptible.

2I30201B-En_p42-45

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced playback (DVD)

Zooming/Locating desired scene

ZOOM

C/D/B/A

ENTER

CLEAR

DISPLAY

0–9

JUMP

DVD

VCD

Zooming

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

Press ZOOM during playback.

Press C/D/B/A to view a different part of the

frame.

The center part of the image will be

zoomed in.

Each press of ZOOM will change the

You may move the frame from the

centerpositiontoUP,DOWN,LEFTor

RIGHT direction.

ZOOM 1 (x 1.3), 2 (x 1.5) and

(x 2.0).

In the zoom mode, press ZOOM repeatedly to

return to a 1:1 view ( Off).

Notes:

• You can select the Pause, Slow or Search playback in the zoom mode.

• Some discs may not respond to zoom feature.

DVD

VCD

Locating desired scene

Use the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CD

discs, time and track are used to locate the desired point to play back. To check the title, chapter and time, press DISPLAY.

Press Number buttons (0–9) to change the

number.

Press JUMP during playback or stop mode.

Jump

Title

Jump

Title

Chapter

Time

Chapter

Time

• “Time” only works in playback

or resume stop mode.

• If you input a wrong number, press

CLEAR.

• Refer to the package supplied with

Press C or D to select the “Title”, “Chapter” or

the disc to check the numbers.

“Time”.

Jump

Press ENTER. Playback starts.

Title

Chapter

Time

• When you change the title,

playback starts from Chapter 1

of the selected title.

• Some discs may not work in the

above operation.

Notes:

• In case of the Audio CD and Video-CD, only Track and Time

can be selected.

• In case of the Video-CD playback with PBC, the JUMP does

not work. Turn off the PBC

2I30201B-En_p42-45

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced playback (DVD)

C/D

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points.

You can resume playback from each scene.

ENTER

CLEAR

MARKER

DVD

VCD

DVD

VCD

Returning to the scenes

Marking the scenes

Press MARKER during playback or stop mode.

Press MARKER during playback.

Select the blank Marker using C or D.

Then press ENTER at the desired scene.

Press C or D to select the Marker 1-3.

• Repeat this procedure to set the

other 2 scenes.

Press ENTER.

Playback starts from the marked

scene.

Press MARKER to clear this display.

To cancel the Marker

Follow the above steps 1~2, then press CLEAR.

Notes:

•

Some discs may not work with the marking operation.

The marking is canceled when you open the disc tray or turn

the power off.

Some subtitles recorded around the marker may fail to

appear.

•

2I30201B-En_p46-49

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat playback/A-B Repeat playback

ENTER

PLAY

A-B RPT

PLAY MODE

DVD

VCD

DVD

VCD

Repeat playback

A-B Repeat playback

A-B repeat playback allows you to repeat material between

two selected points.

PressPLAYMODEduringplaybackorstopmode.

Press A-B RPT during playback.

The start point is selected.

[DVD]

Press ENTER to select “Chapter” or “Title”.

Play Mode

Repeat

: Off

The unit automatically starts repeat

playback after finishing the current ti-

tle or chapter.

Press A-B RPT again.

The end point is selected. Playback

starts at the point that you selected.

Playback stops at the end point, re-

turns to Point A automatically, then

starts again.

[Video CD]

Press D to select “Repeat”.

Press ENTER to select “Track” or “All”.

Play Mode

Mode

: Off

Repeat

: Off

The unit automatically starts repeat

playback after finishing the current

track.

To resume normal playback

Press A-B RPT again.

• If you set the repeat mode during stop mode,

press PLAY to start Repeat playback.

“

” appears on the screen.

Off

[Audio CD and MP3/WMA CD]

Please see “Repeat playback (CD)”

Notes:

• In A-B Repeat mode, subtitles near the A or B locations may

not be displayed.

• You cannot set the A-B Repeat for the scenes that include

multiple angles.

Press PLAY MODE again to clear the screen.

• A-B Repeat playback does not work when Repeat playback is

activated.

• You may not be able to set A-B Repeat, during certain scenes

of the DVD.

• A-B Repeat does not work with an interactive DVD, MP3/WMA/

JPEG CD.

• A-B Repeat is prohibited when PBC is on.

To resume normal playback

Select Repeat : “Off” in step 2.

Notes:

• Some discs may not work with the repeat operation.

• In case of Video CD with PBC, repeat functions are prohib-

ited during playback.

2I30201B-En_p46-49

1/13/06, 2:49 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced playback (DVD)

Program playback/Random playback

You can arrange the playback order of tracks or files on the disc.

And the unit can also select tracks or files at random and playback

them. These feature works for Video CD.

C/D/B/A

ENTER

CLEAR

PLAY

For Audio CD and MP3/WMA CD, please see “Random playback

PLAY MODE

0–9

(CD)” and “Program playback (CD)”

Program playback

Press PLAY MODE during stop mode.

Press B/A to return to the left column, then

press C/D to select the “Program Playback”

and press ENTER.

Play Mode

Mode

: Off

— — —

Repeat

: Off

The programs you selected will start to playback in

the order.

Program Playback

• To resume normal playback, select Mode:

“Off” in step 2.

Press C/D to select “Mode”, then press

ENTER to select “Program”.

Play Mode

Mode

: Program

Mode

: Program

Repeat

: Off

– – –

Repeat

: Off

Program Playback

■ To change the program

1. Select Mode to “Program” (as step 2), press B /A/C/

D to select the track number you want to change, then

press CLEAR.

2. Press Number buttons (0–9) to overwrite the new

track number.

■ To clear the program one by one

Select Mode to “Program”, press B/A/C/D to select the

track number. Then press CLEAR.

Press B/A to select the programming position.

Use Number buttons (0–9) to input the track

numbers on sequentially.

• If you input a wrong number, press

CLEAR.

Play Mode

■ To clear all the programs

In the left column, press C/D to select “Clear Program”.

Then press ENTER.

Mode

: Program

Repeat

: Off

– – –

Program Playback

Notes:

• In playing back the Video CD with PBC, you cannot set

Program playback.

• The program is cancelled when you open the disc tray or

turn the power off.

Random playback

Press PLAY MODE during playback or stop

mode.

Press PLAY.

The Random Playback will start.

• If you set “Random” during playback mode,

Random playback will begin after the track that is

currently being played has ended.

• To resume normal playback, select Mode:

“Off” in step 2.

Press C/D to select “Mode”, then press

ENTER to select “Random”.

Play Mode

Mode

: Random

– – –

Repeat

: Off

Note:

Program Playback

In playing back the Video CD with PBC, you cannot set

Random playback.

2I30201B-En_p46-49

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Press

to select the desired title.

TOP MENU

DVD MENU

C/D/B/A

ENTER

Changing angles/Title selection/DVD menu

PLAY

ANGLE

DVD

Changing angles

When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.

Press ANGLE during playback.

Press ANGLE repeatedly until the desired angle

is selected.

The current angle will appear.

1/2

Note:

Depending on the DVD, you may not be able to change the

angles even if multi-angles are recorded on the DVD.

DVD

Title selection

Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.

Press TOP MENU during playback.

Title menu appears on the screen.

Press ENTER or PLAY.

The playback of the selected title will

start.

Note:

Depending on the DVD, you may not be able to select the title.

Depending on the DVD, a “title menu” may simply be called a

“menu” or “title” in the instructions supplied with the disc.

DVD

DVD menu

Some DVDs allow you to select the disc contents using the menu.

When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.

Press DVD MENU during playback.

TheDVDmenuappearsonthescreen.

Press ENTER.

The menu continues to another

screen. Repeat steps 2 and 3 to set

the item completely.

• Press DVD MENU again to resume

playback at the scene when you

press DVD MENU.

Press C/D/B/A to select the desired item.

Note:

Depending on the DVD, you may not be able to resume playback

from the scene point when you press DVD MENU.

2I30201B-En_p46-49

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced playback (DVD)

Changing soundtrack language/

Setting surround sound

B/A

AUDIO

DVD

VCD

Changing soundtrack language

You can select the language when you play a multilingual disc.

In case of Video CD playback

Audio type changes as follows each time you press AUDIO.

Press AUDIO during playback.

The current soundtrack language will

appear.

1/2 Eng Dolby Digital

Notes:

• If the desired language is not heard after pressing the

button several times, the language is not recorded on the

disc.

• Changing soundtrack language is canceled when you open

the disc tray. The initial default language or available

language will be heard if the disc is played back again.

Press AUDIO repeatedly until the desired lan-

guage is selected.

2/2 Fre Dolby Digital

• The on screen display will disappear after a few

seconds.

DVD

Setting surround sound

This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.

To cancel Surround mode:

Follow the left steps 1~2, then press B or A to select the

During disc playback press AUDIO.

“Off” position.

QSound Off

Notes:

• The “QSound” is effective only for the sound of disc.

• The QSound setting can also be changed in the function

setting

• This function works only when the disc recorded with

Dolby Digital is played back.

• When this function works, the volume might changed.

• When the voice is distorted, turn off QSound.

Press B or A to select “On”.

QSound On

Manufactured under license from QSound Labs,

Inc. U.S. patent Nos. 5,105,462, 5,208,860 and

5,440,638 and various foreign counterpart.

QXpander^™is a trademark of QSound Labs, Inc.

• The on screen display will disappear after a few

seconds.

2I30201B-En_p50-56

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Subtitles/To turn off the PBC

C/D

ENTER

PLAY MODE

SUBTITLE

DVD

To turn off the PBC

Subtitles

When playing back a disc recorded with subtitles, you can

select the subtitle language or turn the subtitle off.

Press PLAY MODE in the stop mode.

Press SUBTITLE repeatedly during playback

until your desired language appears.

Press

to select “Mode”, then press

1/5 Eng

ENTER repeatedly until “Off” appear.

Play Mode

Mode

: Off

— — —

To turn off the subtitle, press SUBTITLE until

Repeat

: Off

“Off” appears.

Program Playback

Off

Press PLAY MODE again to clear the screen.

• The on screen display will disappear after a few

seconds.

To turn on the PBC

Notes:

Follow the above steps 1~2, then press ENTER repeatedly

until “PBC” appear.

• Depending on the DVD, you may not be able to change

subtitles, or to turn subtitles on or off.

• While playing a DVD, the subtitle may change when you

open or close the disc tray.

• In some cases, a selected subtitle language may not be

changed immediately.

2I30201B-En_p50-56

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced playback (DVD)

MP3/WMA/JPEG and Audio CD operation

ThisplayercanplaybacktheMP3/WMA/JPEG-datawhichhasbeenrecordedonCD-RorCD-RW. ToproducetheMP3/WMA

JPEG-data,youneedaWindows-PCwithCD-RWdriveandaMP3/WMA/JPEG-encodingSoftware(notsupplied).TheApple-

HFS-System cannot be played.

Note:

This unit requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.

Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats

(including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, Toshiba cannot

guarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in this

owner’s manual are meant as a guide only.

Please be advised that you must obtain permission from the applicable copyright owners to download copyrighted

content, including music files, in any format, including the MP3 and WMA formats, prior to the downloading thereof.

Toshiba has no right to grant and does not grant permission to download any copyrighted content.

MP3/WMA/JPEG CD information

Limitations on MP3/WMA/JPEG CD playback

•

MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters,

“.mp3”, “.wma”, “.jpg”.

•

MP3/WMA/JPEG CD must be correspond to the ISO standardized files.

This unit can read 600 files per disc. If one directory has more than 600 files, it reads up to 600 files, the remaining

files will be omitted.

•

The unit is able to recognize up to a maximum of 50 directories per disc.

MP3/WMA/JPEG CDs cannot be used for the purpose of recording.

If the CD has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.

It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.

Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 15 letters)

on the screen. Long file names will be condensed.

•

The music files recorded by “Hierarchical File System” (HFS) cannot be played.

Limitations on display

•

The maximum number for display is 15 letters.

Available letters for display are the following:

capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).

Other letters than those above are replaced in hyphen.

•

Notes on MP3/WMA/JPEG files

To play back MP3/WMA/JPEG CD in the recorded order,

1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.

2. Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).

3. Refrain from making too many sub-folders.

CAUTION:

•

Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.

•

The CD-R/RW that has no music data or non MP3/WMA/JPEG files cannot be played back.

Standard, sampling frequency, and the bit rate:

MP3 CD

MPEG-1 Audio

32kHz, 44.1kHz, 48kHz

32kbps ~ 320kbps (constant bit rate or variable bit rate)

The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant

bit rate.

WMA CD

WMA version 7 and 8

32kHz/48kbps, 44.1kHz/48kbps~192kbps, 48kHz/128kbps~192kbps

The file recorded by mono, 48kHz, 48 kbps is not available to this unit.

Microsoft, Windows Media, and Windows Logo are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

2I30201B-En_p50-56

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

TOP MENU

▲ /▼ /

ENTER

RETURN

PLAY

STOP

MP3/WMA CD and Audio CD playback

About file browser

Place an Audio CD or a disc on which MP3 or

WMA files have been recorded onto the disc tray.

A file browser screen will appear on the

screen.

Press

to select the desired file.

• In case the current directory includes more than 8

files, press or to scroll in the file list.

• To see contents in folder, select the folder and then

Notes:

• The thumbnail list is displayed when the FUJICOLOR CD

or the Kodak Picture CD are played. To display the file

browser, press TOP MENU.

• In the case of a CD containing a mixture of MP3, WMA

and JPEG files, the files are played back by selecting

them from the file browser.

press ENTER. To return to the upstairs directory, select

“

Go Up ...” then press ENTER.

• When PLAY is pressed after display the file browser,

or when the disc tray is closed using PLAY, playback

begins automatically starting from the first file. In this

case, if the first file is an MP3/WMA file, only MP3/

WMA files are played back in order. If the first file is a

JPEG file, the first JPEG file is played back. If there

is no file at a root directry, playback does not begin

automatically.

• MP3 or WMA file on the Kodak Picture CD is not

recognized on this unit.

Notes:

• During MP3/WMA/JPEG-Playback, you cannot use JUMP and

A-B Repeat functions.

• You can use Repeat (Track or All), Random functions and

Press ENTER.

The selected file starts playing back.

Program playback for MP3/WMA/JPEG CD Playback

Select Files

The file type to make it display in the file browser can be

chosen.

1. Press B or A to highlight “Select Files” at right column

in the file browser.

2. Press ENTER, then press or to select file type

Press STOP to end playback.

from the list (Music or Picture).

3.PressENTERtoadd/removecheckmark.Checked

file type will be displayed in the file browser.

4.Press RETURN to save the setting.

• The unit records the stopped point. “ ” appears on

the screen. Press PLAY to resume playback (from the

scene point).

• If you press STOP again or unload the disc, the unit

will clear the stopped point.

2I30201B-En_p50-56

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced playback (DVD)

TOP MENU

DVD MENU

C/D/B/A

ENTER

PAUSE/STEP

PLAY

MP3/WMA/JPEG and Audio CD operation

(Continued)

STOP

ANGLE

JPEG CD playback

Slide show playback

The slide show enables you to view pictures (files) one after

another automatically.

Place a disc on which JPEG files have been

recorded onto the tray.

Preparation:

Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds”

A file browser screen will appear on the

or “15 Seconds”

screen.

/Picture-01.JPG

Select Files

Picture-01

Select your desired starting file for the slide

show in the step 3 as left.

Repeat :Off

Picture-02

Picture-03

Picture-04

Picture-05

Picture-06

Picture-07

Picture-08

Mode :Off

JPEG Preview

W: 2048 H: 1536

Press ENTER or PLAY to start slide show from

the selected file.

Press C/D to select the desired file.

To display a thumbnail list, press DVD MENU.

Press B/A or C/D to select the desired file.

(To return to a file browser, press TOP MENU.)

• If you press PAUSE/STEP during the slide show, the

slide show stops temporary. “ 4 ” appears briefly on

the picture.

If the picture appears upside down or sideways, press

ANGLE repeatedly until it’s right side up.

• When PLAY is pressed after displaying the file

browser, or when the disc tray is closed after

pressing PLAY, playback begins automatically

starting from the first file. In this case, if the first

file is a JPEG file, the first JPEG file is played

back. If the first file is an MP3/WMA file, only

MP3/WMA files are played back in order. If

there is no file at a root directory, playback does

not begin automatically.

“

”, “ ”, “

” or “ ” appears on the screen.

again to resume the slide show.

Press PLAY or SKIP

• When the slide show playback, finished the file list ap-

pears.

• To stop the slide show, press STOP. The file list ap-

pears.

Press ENTER or PLAY. The selected picture

appears on the screen.

Notes:

• Zoom function also can be used in viewing JPEG files.

See “Zooming”

• During JPEG playback, you cannot use Jump and A-B

Repeat functions.

Rotating an image

You can rotate an image by 90 degrees by

pressing ANGLE during playback of the image.

“

”, “ ”, “

screen.

Press STOP to end playback.

The file browser appears on the

” or “ ” appears on the

screen. If you want to watch the

other file, repeat steps 3 ~ 4.

2I30201B-En_p50-56

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

C/D/B/A

ENTER

PLAY

Repeat playback (CD)

Random playback (CD)

In the file browser, press B/A or C/D to select

“Mode” during stop mode.

In the file browser, press B/A or C/D to select

“Repeat” during stop mode.

Select Files

Folder-1

Repeat :Off

Folder-2

MP3-1

MP3-2

MP3-3

Mode :Off

Press ENTER to select “Random”.

Press ENTER to select “Track” or “All”.

Select Files

Repeat :Track

Mode :Off

Folder-1

Folder-2

MP3-1

MP3-2

MP3 3

Press PLAY.

The Random playback will start.

The unit automatically starts repeat

playback after finishing the current

track.

To resume normal playback

Select Mode : “Off” in step 2.

To resume normal playback

Select Repeat : “Off” in step 2.

Notes:

• The program is canceled when you open the disc tray or

turn the power off.

• In case of Audio CD, the function of A-B Repeat also can

be used. See “A-B Repeat playback”

2I30201B-En_p50-56

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced playback (DVD)

MP3/WMA/JPEG and Audio CD operation

(Continued)

▲ /▼ /

ENTER

PLAY

Program playback (CD)

In the file browser, press B/A or C/D to select

“Edit Mode”, then press ENTER.

Press B/A or C/D to select “Program View”,

then press ENTER. Program View shows only

the programed files that you have added in

step 2.

MP3-1

Folder-1

Edit Mode

Repeat :Off

MP3-2

MP3-3

WMA-3

Browser View

Clear Program

Folder-2

MP3-1

MP3-2

MP3 3

Mode

:Off

Edit Mode

JPEG Preview

When “Edit Mode” is black color,

you can mark the files which you want

to add into Program list.

Program View

Press B/A or C/D to select file you want to

add into the program list.

Folder-1

Folder-2

MP3-1

Edit Mode

Program View

Add To Program

Folder-1

Folder-2

MP3-1

Repeat :Off

Mode :Off

MP3-2

MP3-3

Edit Mode

WMA-1

WMA-2

WMA-3

JPEG Preview

MP3-2

MP3-3

WMA-1

WMA 2

Browser View

JPEG Preview

Press ENTER. Selected file was

marked.

Repeat this procedure to select the

other files.

In the Program View, press PLAY. The files

start to playback in programmed order that

were added by you.

To remove file from program list

Press B/A or C/D to select “Add To Program”.

Then press ENTER. All marked files are added

into the program list.

In the Edit Mode, switch to Program View. Select

file you want to remove, then press ENTER.

Select “Clear Program” and press ENTER.

Marked file is removed from program list.

Folder-1

Edit Mode

Folder-2

MP3-1

MP3-2

MP3-3

WMA-1

WMA-2

Program View

Add To Program

JPEG Preview

•When you finish store all files which

you want into the Program list,

press “Edit Mode” again to release

edit mode.

2I30201B-En_p50-56

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Function setup (DVD)

Customizing the function settings

You can change the default settings to customize performance

to your preference.

SETUP

C/D/B/A

ENTER

RETURN

DVD

VCD

Setting procedure

Press SETUP during stop mode.

Change the selection using C or D, by referring

to the corresponding pages

The following on-screen display

appears.

Press ENTER to save the setting.

• Repeat steps 3 and 5 to change

other option.

• To select another section, go

back to step 2 by pressing B

repeatedly.

PDEMa.ReBrnCe.Lun.tal

QTSVuSboStuictnrledSeent Pass:wO4Eo:nnr3dglish

ODAuisdtppilouaty : IOEnnntegrlliasche

: OEnffglish

Picture MDoivdXe(R) :VAOuDto

JPEG Interval : 5 Seconds

Screen Saver : On

To clear SETUP screen, press SETUP or

RETURN.

Press C or D to select the desired section, then

press B or A.

PDMEa.ReBrnCe.Lun.tal

QSTVuSboStuictnrledSeent Pass:wOE4o:nnr3dglish

OADuisdtppilouaty : IEOnnntegrlliasche

: EOnffglish

Picture MDoivdXe(R) :VAOuDto

JPEG Interval : Off

Screen Saver : On

First option will be highlighted. Press C or D

to select the desired option.

PDMEa.ReBrnCe.Lun.tal

QSTVuSboStuictnrledSeent Pass:wOE4o:nnr3dglish

OADuisdtppilouaty : IEOnnntegrlliasche

: EOnffglish

Picture MDoivdXe(R) :VAOuDto

JPEG Interval : Off

Screen Saver : On

Then press A or ENTER. The selectable

settings will appear.

PDMEa.ReBrnCe.Lun.tal

QSTVuSboStuictnrledSenet Pass:wOEonrdglish

OADuisdtppilouaty : IEOnnntegrlliasche

: OEnffglish

Picture MDoivdXe(R) :VAOuDto

JPEG Interval : Off

Screen Saver : On

2I30201B-En_p57-62

1/13/06, 2:50 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Function setup (DVD)

Customizing the function settings (Continued)

Setting details

Section

Option

Details

Page

Subtitle

Audio

To select the language of “Menu”, “Subtitle” and

“Audio” if more than one language are available on

the disc.

E.B.L.

To select On or Off for E.B.L. (Enhanced Black

Level).

TV Screen

Display

To select a picture size according to the aspect

ratio of your TV.

To turn on or de-activate the operational status dis-

play on the screen.

Picture Mode

JPEG Interval

Screen Saver

DRC

To select a preferred picture mode from “Video”,

“Film” or “Auto”.

To select a preferred setting for the slide show play-

back.

To select On or Off for Screen Saver function.

To select On or Off for DRC (Dynamic Range Con-

trol).

QSound

To select On or Off for QSound.

Parental

To select a preferred parental level for the parental

setting.

Password

Output

Input 4-digit password to set the parental level.

To select a preferred video output signal from “Inter-

lace” or “Progressive”.

2I30201B-En_p57-62

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

PDEMa.ReBrnCe.Lun.tal

QTSVuSboStuictnrledSeent Pass:wO4Eo:nnr3dglish

ODAuisdtppilouaty : IOEnnntegrlliasche

: OEnffglish

PDMEa.ReBrnCe.Lun.tal

QSTVuSboStuictnrledSeent Pass:wOE4o:nnr3dglish

OADuisdtppilouaty : IEOnnntegrlliasche

: EOnffglish

Picture MDoivdXe(R) :VAOuDto

JPEG Interval : 5 Seconds

Screen Saver : On

Picture MDoivdXe(R) :VAOuDto

JPEG Interval : Off

Screen Saver : On

Menu, Subtitle, Audio

E.B.L.

You can select the language of “Menu”, “Subtitle” and

“Audio” if more than one languages are recorded onto

the disc.

To select the black level of playback pictures, set your

preference and monitor’s ability.

Off: Standard grey scale (7.5 IRE cut off)

English, Francais, Espanol:

On: Enhanced grey scale (0 IRE cut off)

The selected language will be heard or seen.

Other:

Other language can be selected (see the

TV Screen

“Language code list”

You have the following screen sizes to choose from:

Original: (Audio)

The unit will select the first priority language of

each disc.

4:3

(Letter box):

Select this mode when connecting to a conven-

tional TV. When playing back a wide screen-DVD

disc, it displays the wide picture with black bands

at the top and bottom of screen.

Off: (Subtitle)

Subtitles do not appear.

Notes:

• If the selected language is not recorded on the disc, the

first-priority language is selected.

• If you want to change the OSD language, you can perform

4:3

(Pan scan):

It displays the wide picture on the whole screen

with left and right edges automatically cut off.

it by VCR MENU

16:9

(Wide):

Select this mode when connecting to a wide-

screen TV. A wide screen picture is displayed full

size.

Note:

If the DVD disc is not formatted in the pan & scan style, it

displays 4:3 style.

2I30201B-En_p57-62

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Function setup (DVD)

Customizing the function settings (Continued)

Setting details

Display

JPEG Interval

You can continuously play back all JPEG files

automatically.

On screen display can be switched on or off when you

press the buttons.

After the setting below, start playing the disc on which

JPEG files have been recorded.

Off: On screen displays do not appear when you

press any buttons.

On: On screen displays appear when you press

the buttons (factory setting).

Off:

Plays back one file at a time.

5 Seconds:

Plays back images in the form of a slide show at

5 second intervals.

Picture Mode

There are two types of source content in pictures

recorded in DVD video discs: film content (pictures

recorded from films at 24 frames per second) and

video content (video signals recorded at 30 frames per

second). Make this selection according to the type of

content being viewed.

10 Seconds:

Plays back images in the form of a slide show at

10 second intervals.

15 Seconds:

Plays back images in the form of a slide show at

15 second intervals.

Auto: Select this position normally.

The DVD player automatically detects

source content, film or video, of

playback source, and converts that

signal in the progressive output format

in an appropriate method.

Screen Saver

The screen saver operates when you leave the unit

in DVD stop mode for approx. five minutes.

The screen will repeatedly get dark gradually and

back to normal.

Film: The DVD player converts film content

pictures in the progressive output

format appropriately. Suitable for

playback of film content pictures. The

progressive output feature will be most

effective under this selection.

Off:

Screen Saver function is invalidated.

On:

Video: The DVD player filters video signal,

and converts it in the progressive

output format appropriately.

Suitable for playback of video content

pictures.

Screen Saver function is made effective.

Note:

Depending on the disc, pictures may be cut off or

doubled. In this case, select “Video”.

2I30201B-En_p57-62

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

PMEDa.ReBrnCe.Lun.tal

STQVuSboStuictnrledSeent Pass:wE4Oo:nfr3fdglish

OADuisdtppilouaty : IEOnnntegrlliasche

: EOnffglish

Picture MDoivdXe(R) :VAOuDto

JPEG Interval : 5 Seconds

Screen Saver : On

DRC

Parental control setting

Some discs are specified not suitable for children.

Such discs can be limited not to play back with the unit.

DRC (Dynamic Range Control) enables you to control

the dynamic range so as to achieve a suitable sound for

your equipment.

1) Press C or D to select “Parental”, then press

ENTER. “Enter Password” will appear.

2) Press “0000” using Number buttons (0–9).

(Please note, this is pre-setting password of this

unit). Then press ENTER. The parental level list

will appear.

Off:

It plays back at the recording level on the disc.

On:

Loud sound such as explosion or similar is toned

down slightly when played back. This makes it

suitable for when it is connected to a stereo.

• Level Off: The parental control setting does not

function.

• Level 8: All DVD software can be played back.

• Level 1: DVD software for adults cannot be

played back.

Notes:

• This function works only during playback of Dolby Digital

recorded discs.

• The level of Dynamic Range Reduction may differ

depending on DVD video disc.

3) Press C or D to select from the level 1 to level 8.

The limitation will be more severe as the level

number is lower.

4) Press OPEN/CLOSE to activate Parental control

setting.

Notes:

QSound

• Depending on the discs, the unit cannot limit

playback.

• Some discs may not be encoded with specific rating

level information though its disc jacket says “adult.”

For those discs, the age restriction will not work.

• The password is required every time when you

change the parental level.

This DVD video player equipped with a “QSound”. It can

produce the effect of being in a cinema or a concert hall.

Off: The QSound is disengaged.

On: The QSound operates.

• If you input a wrong number, press CLEAR.

Notes:

Set the new password

• The QSound setting can also be changed with AUDIO

on the remote control

• This function works only when the disc recorded with

Dolby Digital is played back.

• When this function works, the volume might changed.

• When the voice is distorted, turn off QSound.

1) Press C or D to select “Password”, then press

ENTER. “Enter Current Password” will appear.

2) Press Number buttons (0–9) to input the current

password (If the password has not been set yet

after you purchase this unit, it is “0000”).

3) Then press ENTER. “Enter New Password” will

appear. Press Number buttons (0–9) to input the

new password.

4) Press ENTER. Now your new password has been

set. Be sure to remember this number!

2I30201B-En_p57-62

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Function setup (DVD)

Customizing the function settings (Continued)

Setting details

Note:

If each setup (pages

If you forget the password...

) has been completed, the unit

can always be worked under the same conditions (espe-

cially with DVD discs).

Each setup will be retained in the memory even if you turn

the power off.

1) Press OPEN/CLOSE to open the disc tray.

2) Remove the disc.

3) Press OPEN/CLOSE again to close the disc tray.

“No Disc” appears on the screen.

4) While holding 7 down on the remote control and

then press STOP on the front panel. “Password

Clear” appears on the screen. Now the password

has been returned to the initial value (“0000”).

Output

You can select the video output signal of the DVD

video player to the TV from “Interlace” or “Progres-

sive”.

Interlace:

Select when connecting to a composite TV or a TV

equipped with component video inputs but

progressive scan is not compatible.

Progressive:

Select when connecting to a TV equipped with

component video inputs, progressive scan

compatible.

Warning:

Once “Progressive” is selected when connecting to a

TV progressive scan incompatible, no image will be

seen on the video display.

In this case, you must reset the unit by pressing STOP

on the front panel for five seconds. The video output

will be restored to “Interlace” setting, and a picture will

once again be seen on a conventional analog display.

Notes:

• Some discs may not be played back with the progressive

scanning mode correctly because of the disc characteris-

tics or recording condition.

• Once Progressive scan on, S-video output is disabled.

2I30201B-En_p57-62

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN/CLOSE

Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc may try to temporarily cancel the rating

level that you have set.

ENTER

RETURN

PLAY

It is up to you to decide whether to cancel the rating level or not.

0–9

Note:

Load a DVD disc and press PLAY or OPEN/

This temporary cancellation of rating level will be kept until the

disc is ejected.

When the disc is ejected, the original rating level will be set again

automatically.

CLOSE on the unit

If the DVD disc has been designed to tempo-

rarily cancel the Rating level, the screen which

follows the “Reading” screen will change,

depending on which disc is played. If you

select “YES” with the ENTER key, password

input screen will then appear.

Enter the password with Number buttons (0–9).

Then press ENTER.

To exit from the entry, press

RETURN.

Playback will commence if the entered

password was correct.

2I30201B-En_p63-66

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Others

Language code list

Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio”

Language Name Code Language Name Code Language Name Code Language Name Code

Abkhazian

Afar

1112 Fiji

1620 Lingala

1619 Lithuanian

1628 Macedonian

1635 Malagasy

1722 Malay

2224 Singhalese

2230 Slovak

2321 Slovenian

2317 Somali

2329 Spanish

2322 Sundanese

2330 Swahili

2319 Swedish

2328 Tagalog

2325 Tajik

2919

2921

2922

2925

1529

2931

2933

2932

3022

3017

3011

3030

3015

3018

1225

3019

3025

3028

3021

3033

3121

3128

3136

3219

3225

1335

3325

3418

2019

3525

3631

1111 Finnish

1116 French

2927 Frisian

1123 Galician

1128 Georgian

1835 German

1129 Greek

Afrikaans

Albanian

Amharic

Arabic

2111 Malayalam

1415 Maltese

1522 Maori

Armenian

Assamese

Aymara

1135 Greenlandic

1136 Guarani

1211 Gujarati

1531 Hausa

2122 Marathi

1724 Moldavian

1731 Mongolian

1811 Nauru

Azerbaijani

Bashkir

2324 Tamil

Basque

2411 Tatar

Bengali; Bangla 1224 Hebrew

1933 Nepali

2415 Telugu

2425 Thai

Bhutani

Bihari

1436 Hindi

1819 Norwegian

1831 Oriya

1218 Hungarian

1228 Icelandic

1217 Indonesian

2335 Interlingua

1215 Irish

2528 Tibetan

2611 Tigrinya

Breton

1929 Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

1924 Pashto, Pushto 2629 Tonga

1911 Persian

1711 Polish

1611 Turkish

2622 Turkmen

2630 Twi

2123 Italian

1930 Portuguese

2011 Quechua

1311 Japanese

3618 Javanese

1325 Kannada

1828 Kashmiri

1329 Kazakh

1411 Kirghiz

2422 Korean

1524 Kurdish

1525 Laothian

1530 Latin

2731 Ukrainian

2033 Rhaeto-Romance 2823 Urdu

2124 Romanian

2129 Russian

2121 Samoan

2135 Sanskrit

2125 Scots Gaelic

2131 Serbian

2825 Uzbek

2831 Vietnamese

2923 Volapük

2911 Welsh

1714 Wolof

Danish

Dutch

English

2928 Xhosa

Esperanto

Estonian

Faroese

2225 Serbo-Croatian 2918 Yiddish

2211 Shona

2924 Yoruba

2914 Zulu

1625 Latvian, Lettish 2232 Sindhi

2I30201B-En_p63-66

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions.

Symptoms

Solutions

Page

DVD/VCR

• Make sure the power cord is plugged in.

• Try another AC outlet.

–

DVD/VCR does not operate.

No picture.

• Unplug unit, then plug it back in.

• Select the DVD or VCR mode before operating.

30,42

• Antenna connection is not correct or antenna cable is disconnected.

• The video channel is not in the correct position or the TV is not set to the video

channel 3 or 4.

• Check the unit is connected correctly.

• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or

equivalent).

14~17

14~19

–

• Channel is set to the external mode.

–

• Check the unit is connected correctly.

• Check the input selector of the amplifier is set properly.

• The unit is in the Special playback mode.

14~19

–

31,44

No sound.

• Aim the remote control at the remote sensor.

• Operate within Approx. 7 Meters or reduce the light in the room.

• Clear the path of the beam.

• The batteries are weak. Replace the batteries.

• Check the batteries are inserted correctly.

The remote control does not function.

No Cable TV reception.

• Check all Cable TV connections.

• Station or Cable TV system problems, try another station.

16,17

VCR

• The erase prevention tab of the video cassette is broken off.

• The unit is in the external input mode.

TV recording does not work.

29,34

• The time is not set correctly.

• The recording start/end time is not set correctly.

• The TIMER REC has not been pressed ( is not lit).

24~26

Timer recording does not work.

Noise bars on screen.

• Tracking adjustment beyond range of automatic tracking circuit. Try Manual

tracking adjustment.

• Video heads are dirty.

• The tape is worn or damaged.

–

DVD

Display is not shown in your language.

• Select proper language in the menu options.

• No disc is inserted.

• The disc may be dirty. Clean up the disc.

• The unit cannot play DVD-ROMs, etc.

Playback doesn’t start.

Stopping playback, slow-motion play, repeat

play, or memory play, etc. cannot be

performed.

• Some discs may not do some of the functions.

–

• The PROGRESSIVE scan is “On” although the unit is connected to a TV

via the VIDEO OUT or the S-VIDEO OUT jack.

No picture, or the screen is blurred or divided

into two parts.

No 4:3 (16:9) picture.

• The setup does not match your TV.

No on-screen display.

No surround sound.

• Select Display to “On”.

• The setup does not match your stereo system.

The unit or remote operation key is not

functioning.

• Turn off the unit and unplug the AC power cord for several minutes, then replug it.

• Check the Parental setup.

–

Playback does not start when the title is

selected.

61,63

50,51

Audio soundtrack and/or subtitle language

is not changed when you play back a DVD.

• Multilingual language is not recorded on the DVD disc.

• Some discs have no subtitles.

No subtitle.

• Subtitles are cleared. Press SUBTITLE.

• Multi-angles are not recorded on the DVD disc.

• The function is prohibited with the unit or the disc.

Angle cannot be changed.

“X” appears on the screen.

2I30201B-En_p63-66

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Others

Specifications

General

Power supply

Power consumption

Weight

AC 120 V 60 Hz

Operation: 18 W, Stand by: 2 W

7.7 lbs (3.5 kg)

Dimensions

Width: 16-15/16 inches (430.6 mm)

Height: 3-9/16 inches (89.7 mm)

Depth: 9 inches (228.7 mm)

181 channel freq. synthesized

Tuner

VHF

UHF

2-13

14-69

Cable TV 113 Channels

Antenna input/output

RF channel output

Color system

UHF/VHF In/Out: 75 Ω coaxial

Channel 3 or 4, Switchable

NTSC

Video head

4 Rotary heads

Audio track

Hi-Fi sound - 2 Tracks / MONO sound - 1 Track

20 Hz to 20,000 Hz

More than 90dB

Approx. 1 minute and 48 seconds (with T-120 Cassette Tape)

DVD (12 cm, 8 cm), CD (12 cm, 8 cm)

DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz

85dB (DVD)

Hi-Fi frequency response

Hi-Fi dynamic range

FF/REW time at 25˚C (77˚F)

Applicable disc

Frequency range

S/N ratio

Harmonic distortion

Wow and flutter

0.06% (DVD)

Less than 0.01% Wrms

Operating conditions

Temperature: 5˚C-40˚C (41˚F-104˚F), Operating status: Horizontal

Input/Output

DVD/VCR

Video input

Video output

Audio input

Audio output

1.0 V (p-p), 75 Ω, negative sync., pin jack x 2

1.0 V (p-p), 75 Ω, negative sync., pin jack x 1

–8 dBm, 50 kΩ, negative sync., pin jack (L/R) x 2

–8 dBm, 1 kΩ, negative sync., pin jack (L/R) x 1

DVD

S-video output

(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1

Component video output

(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1

(P^B)/(PR) 0.7 V (p-p), 75 Ω, pin jack x 2

Audio output (COAXIAL DIGITAL)

Audio output (ANALOG)

0.5 V (p-p), 75 Ω, pin jack x 1

–12 dBm, 1 kΩ, pin jacks (L, R) x 1

Supplied accessories

Audio/video cable ................................................. 1

Remote control (SE-R0220) ................................. 1

Batteries (R03/AAA) ............................................. 2

75 Ω coaxial cable ................................................ 1

• This model complies with the above specifications.

• Designs and specifications are subject to change without notice.

• This model may not be compatible with features and/or specifications that may be added in the future.

2I30201B-En_p63-66

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited warranty

Limited United States Warranty

DVD/VCR Combinations - Exchange Warranty

Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original

consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER

PURCHASER OR ANY PERSON RECEIVING THIS DVD/VCR COMBINATION AS A GIFT FROM THE

ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.

PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUD-

ING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.

PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,

CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.

Limited Ninety (90) Day Warranty

TACP warrants this DVD/VCR Combination and its

parts against defects in materials or workmanship for

Owner's Manual and Product Registration Card

Read this owner’s manual thoroughly before operat-

ing this DVD/VCR Combination. Complete and mail

period of ninety (90) days after the date of original retail the enclosed product registration card or register

purchase. DURING THE FIRST NINETY (90) DAYS

AFTER THE DATE OF ORIGINAL RETAIL PUR-

CHASE, TACP WILL EXCHANGE A DEFECTIVE

your product on-line at www.tacp.toshiba.com/

service as soon as possible. By registering your

DVD/VCR Combination you will enable TACP to

DVD/VCR COMBINATION WITH A NEW OR REFUR- bring you new products specifically designed to meet

BISHED DVD/VCR COMBINATION WITHOUT

CHARGE TO YOU. YOU MUST CONTACT TACP'S

your needs and help us to contact you in the unlikely

event that a safety notification is required under the

CONSUMER SOLUTIONS CENTER FOR INSTRUC- Consumer Product Safety Act. Failure to complete

TIONS ON HOW TO PROCESS YOUR IN WAR- and return the product registration card does not

RANTY EXCHANGE REQUEST. THE CONSUMER IS diminish your warranty rights.

RESPONSIBLE FOR ALL INBOUND TRANSPORTA-

Your Responsibility

TION AND INSURANCE CHARGES FOR THE DVD/

VCR COMBINATION TO THE EXCHANGE CENTER.

DURING THE PERIOD THAT COMMENCES ON THE

DATE THAT IS NINETY ONE (91) DAYS AFTER THE

DATE OF ORIGINAL RETAIL PURCHASE AND

BEYOND, TACP WILL EXCHANGE A DEFECTIVE

DVD/VCR COMBINATION WITH A NEW OR

REFURBISHED DVD/VCR COMBINATION FOR A

NOMINAL FEE. YOU MUST CONTACT TACP'S

CONSUMER SOLUTIONS CENTER FOR

INSTRUCTIONS ON HOW TO PROCESS YOUR

EXCHANGE REQUEST. THE CONSUMER IS

RESPONSIBLE FOR ALL INBOUND TRANSPORTA-

TION AND INSURANCE CHARGES FOR THE DVD/

VCR COMBINATION TO THE EXCHANGE CENTER.

THE ABOVE WARRANTIES ARE SUBJECT TO

THE FOLLOWING CONDITIONS:

(1) You must retain your bill of sale or provide other

proof of purchase.

(2) All warranty servicing of this product must be

made by an Authorized TACP Service Station.

(3) The warranties from TACP are effective only if

the product is purchased and operated in the

Continental U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, setup,

adjustment of customer controls and installation or

repair of antenna systems are not covered by this

warranty. Reception problems caused by

* Rental Units

inadequate antenna systems are your responsibility.

The warranty for rental units begins with the first rental

or thirty (30) days after the date of shipment to the

rental firm, whichever comes first.

(5) Warranties extend only to defects in materials or

workmanship as limited above, and do not extend

to any DVD/VCR Combination or parts that have

been lost or discarded by you or to damage to the

DVD/VCR Combination or parts caused by fires,

misuse, accident, Acts of God (such as lightning

or fluctuations in electric power), improper

* Commercial Units

DVD/VDR Combinations sold and used for commercial

purposes have a limited ninety (90) day warranty for all

parts and labor.

installation, improper maintenance, or use in

violation of instructions furnished by TACP; use or

malfunction through simultaneous use of this

product and connected equipment; or to units that

have been modified or had the serial number

removed, altered, defaced, or rendered illegible.

2I30201B-En_p67-BACK

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Others

Limited warranty (Continued)

How to Obtain Warranty Services

THIS WARRANTY GIVES YOU SPECIFIC LEGAL

If, after following all of the operating instructions in this RIGHTS AND YOU MAY ALSO HAVE OTHER

manual and checking the section "Troubleshooting,"

you fund that service is needed:

RIGHTS WHICH MAY VARY FROM STATE TO

STATE IN THE U.S.A. SOME STATES OF THE

U.S.A. DO NOT ALLOW LIMITATIONS ON HOW

(1) For instructions on how to obtain warranty service LONG AN IMPLIED WARRANTY LASTS, WHEN AN

for exchange program DVD/VCR Combinations, ACTION MAY BE BROUGHT, OR THE EXCLUSION

contact TACP's Call Center toll free at 1-866-583- OR LIMITATION OF INCIDENTAL OR CONSEQUEN-

7353.

TIAL DAMAGES, SO THE ABOVE PROVISIONS

MAY NOT APPLY TO YOU UNDER SUCH CIRCUM-

(2) You must include the original bill of sale (or a copy STANCES.

of the original bill of sale) or other proof of pur-

chase along with the entire DVD/VCR Combination

when sending the DVD/VCR Combination to the

Authorized TACP Service Station specified by

TACP's Call Center. You must pay for all

transportation and insurance charges for the DVD/

VCR Combination to and from the Authorized

TACP Service Station.

For additional information, visit TACP's website:

www.tacp.toshiba.com

ALL WARRANTIES IMPLIED BY THE LAW OF ANY

STATE OF THE U.S.A., INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE

EXPRESSLY LIMITED TO THE DURATION OF THE

LIMITED WARRANTIES SET FORTH ABOVE. WITH

THE EXCEPTION OF ANY WARRANTIES IMPLIED

BY THE LAW OF ANY STATE OF THE U.S.A. AS

HEREBY LIMITED, THE FOREGOING WARRANTY

IS EXCLUSIVE AND IN LIEU OF ALL OTHER

WARRANTIES, GUARANTEES, AGREEMENTS,

AND SIMILAR OBLIGATIONS OF TACP WITH

RESPECT TO THE REPAIR OR REPLACEMENT OF

ANY PARTS. IN NO EVENT SHALL TACP BE

LIABLE FOR CONSEQUENTIAL OR INCIDENTAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO,

LOST PROFITS, BUSINESS INTERRUPTION, OR

MODIFICATION OR ERASURE OF RECORDED

DATA CAUSED BY USE, MISUSE OR INABILITY TO

USE THIS PRODUCT).

No person, agent, distributor, dealer or company is

authorized to change, modify or extend the terms of

these warranties in any manner whatsoever. The time

within which an action must be commenced to enforce

any obligation of TACP arising under the warranty or

under any statute, or law of the United States or any

state thereof, is hereby limited to ninety (90) days from

the date you discover or should have discovered, the

defect. This limitation does not apply to implied

warranties arising under state law.

2I30201B-En_p67-BACK

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Memo

...................................................................................................................................

2I30201B-En_p67-BACK

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Others

Memo

...................................................................................................................................

2I30201B-En_p67-BACK

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

...................................................................................................................................

2I30201B-En_p67-BACK

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

ColorStream and ColorStream Pro are registered trademarks of Toshiba America Consumer Products, L.L.C.

Printed in Thailand

J2I30201B SH 06/02

2I30201B-En_p67-BACK

1/13/06, 2:51 PM

Download from Www.Somanuals.com. All Manuals Search And Download.

Technicolor Thomson CRT Television T 7025 UD User Manual
Timex Watch WS4 User Manual
Toshiba Camcorder IK VR01A User Manual
Toshiba Camcorder PX1589E 1CAM User Manual
Toshiba DVD Player SD P5000 User Manual
TP Link Modem TD 8610 User Manual
VBrick Systems Satellite TV System MPEG 1 User Manual
VDO Dayton MP3 Player MS 4150 RS User Manual
VXI Stereo Amplifier Tuffset Console Amplifier User Manual
Walgreens Cable Box XVT423SV User Manual