Toshiba DVD Recorder D R420KU User Manual

DVD VIDEO RECORDER

DR420KU

OWNER’S MANUAL

Owner’s Record

The model number and serial number are on the back

of your DVD Recorder. Record these numbers in the spaces

below. Refer to these numbers whenever you

communicate with your Toshiba dealer about this DVD

Recorder.

Model number:

Serial number:

Printed in China

1VMN26773 / E7PCAUD

E7PCAUD_DR420KU_cover_EN.indd 2-3

1/23/2009 11:25:43 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

The lightning flash with arrowhead symbol, within an

CAUTION

equilateral triangle, is intended to alert the user to the

RISK OF ELECTRIC SHOCK

presence of uninsulated“dangerous voltage”within the

product’s enclosure that may be of sufficient magnitude

DO NOT OPEN

to constitute a risk of electric shock to persons.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

The important note is located on the rear or bottom of

the cabinet.

The symbol for CLASS ll (Double Insulation)

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod,

7. Do not block any ventilation openings. Install in

bracket, or table specified by the

accordance with the manufacture’s instructions.

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Additional Safety Instructions

15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or

electric shock.

16. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be

placed on the apparatus.

17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.

18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and

serious damage to the apparatus.

19. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal

injury and apparatus malfunction.

20. If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the

smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.

21. While it is thundering, do not touch the connecting cables or the apparatus.

22. Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

E7PCAUD_DR420KU_EN.indd

2/6/2009 10:55:19 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may

cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the

authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

LASER SAFETY

This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this

apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may

result in hazardous radiation exposure.

CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.

LOCATION: Inside, near the deck mechanism.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates

viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing

or climbing on it. A falling unit can cause serious injury or even death.

To Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.

• Do not put your fingers or objects into the unit.

Location and Handling

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.

Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is

placed too close to them. In this case, please ensure enough space between the external devices and the unit.

• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

E7PCAUD_DR420KU_EN.indd

2/6/2009 10:55:21 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

Dew Condensation Warning

• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few

hours until its inside gets dry.

- The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

Note about Recycling

• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

• Batteries should never be thrown away or incinerated but disposed of in accordance with your local

regulations concerning chemical wastes.

Notice for Progressive Scan Output

• Consumers should note that not all high definition television sets are fully compatible with this product and may

cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,

it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions

regarding your TV set compatibility with this 525p(480p) DVD player, please contact Toshiba Customer Service.

Installation Location

Supplied Accessories

For safety and optimum performance of this unit:

remote control with

batteries (AAx2)

RCA audio/video cables

• Install the unit in a horizontal and stable position. Do

not place anything directly on top of the unit. Do not

place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from

devices of intense heat. Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes on

the sides of the unit. Avoid locations subject to strong

vibration or strong magnetic fields.

owner’s manual

quick setup guide

OWNER’S MANUAL

Avoid the Hazards of Electrical Shock and Fire

• If, by accident, water is spilled on this unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

About Copyright

return stop sheet

The unauthorized recording, use, distribution, or revision

of television programs, videotapes, DVDs and other

materials, is prohibited under the copyright laws of the

United States and other countries, and may subject you

to civil and/or criminal liability.

Note to CATV system installer

This reminder is provided to call the cable TV system

installer’s attention to Article 820-40 of the National

Electrical Code, which provides guidelines for proper

grounding - in particular, specifying that the cable

ground shall be connected to the grounding system of

the building, as close to the point of cable entry as

possible.

E7PCAUD_DR420KU_EN.indd

2/6/2009 10:55:21 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

Maintenance

Servicing

• Please refer to relevant topics on “TROUBLESHOOTING”

on pages 94-97 before returning the product.

IR Signal Check

If the remote control does not work properly, you can test if

the remote control sends out the infrared signal with AM

radio or a digital camera (including built-in camera of cellular

phone). It will help to define the cause of malfunction.

• If you need to call a customer service representative,

please know the model number and serial number of

your product before you call. This information is

displayed on the back of the product. Also, please take

a moment to identify the problem you are having, and

be prepared to explain this to the representative. If you

believe the representative will need to help you with

operations, please stay near the product. Our

•

With an AM radio:

Tune an AM radio to a station with no

broadcasting. Press a button on remote

control toward the radio. Sound will be

fluttering when you press any key and the

radio receives the signal. This means the

remote control is working.

•

With a digital camera (including built-in camera of

cellular phone):

Direct a digital camera to remote control,

press and hold a button on remote control. If

infrared light appears through digital camera,

the remote control is working.

representatives will be happy to assist you.

Cleaning the Cabinet

• Wipe the front panel and other exterior surfaces of the

unit with a soft, slightly damp cloth.

• Never use a solvent, thinner, benzene or alcohol to

clean the unit. Do not spray insecticide liquid near the

unit. Such chemicals may discolor the surface or

damage the unit.

Manufactured under license from

Dolby Laboratories. Dolby and the

double-D symbol are trademarks of

Dolby Laboratories.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center to out. Do not

wipe in a circular motion.

• Do not use solvents such as benzine, thinner,

commercially available cleaners, detergent, abrasive

cleaning agents or antistatic spray intended for analog

records.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record

high-quality video with stereo sound on recordable DVD

discs. The technology, when utilized instead of PCM

recording, also saves recordable disc space, allowing for

higher video resolution or extended recording time on

each DVD. DVDs created using Dolby Digital Recording

will play back on all DVD-video players.”

Cleaning the Disc Lens

• If this unit still does not perform properly although you

refer to the relevant sections and to

“TROUBLESHOOTING” in this owner’s manual, the laser

optical pickup unit may be dirty. Consult your dealer or

an Authorized Service Center for inspection and

cleaning of the laser optical pickup unit.

Note: This is true when the players are compatible with

actual recordable DVD discs.

Manufactured under license under U.S.

Patent #: 5,451,942 & other U.S. and

worldwide patents issued & pending.

DTS and DTS Digital Out are registered

trademarks and the DTS logos and

Symbol are trademarks of DTS, Inc.

Disc Handling

• Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is

not used.

HDMI, the HDMI logo and High-

Definition Multimedia Interface

are trademarks or registered

trademarks of HDMI Licensing

LLC.

E7PCAUD_DR420KU_EN.indd

2/6/2009 10:55:21 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

Introduction

Recording

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .8

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing the Batteries in the Remote Control . . . . . . 12

Using a Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . 14

On-Screen Display / Menu. . . . . . . . . . . . . . . . . . . . . . . . . 14

Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

FRONT PANEL DISPLAY GUIDE . . . . . . . . . . . . . . . . . . . 17

INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 33

Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Restrictions on Recording . . . . . . . . . . . . . . . . . . . . . . . . . 33

SETTINGS FOR A RECORDING . . . . . . . . . . . . . . . . . . . . 34

Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 34

Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Recording Audio Select (XP) . . . . . . . . . . . . . . . . . . . . . . . 35

Setting Aspect Ratio for Video Mode Recording . . . . 35

BASIC RECORDING &

ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 36

TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 41

SATELLITE LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 44

Connection to an External Device. . . . . . . . . . . . . . . . . . 44

Recording from an External Device . . . . . . . . . . . . . . . . 45

DV DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Guide to DV and On-Screen Display . . . . . . . . . . . . . . . 46

DVC to DVD Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Connections

CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting to an External Tuner . . . . . . . . . . . . . . . . . . 18

TV Connection Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting to a TV with an HDMI^TM

Compatible Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connecting to a TV with Component Video

Input jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connecting to a TV with an S-Video Input Jack. . . . . 20

Connecting to a TV with Audio / Video Input Jacks . 21

Connecting to a TV without Audio /

Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Digital Audio Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 22

Basic Setup

INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

SETTINGS FOR THE VIDEO INPUT. . . . . . . . . . . . . . . . . 26

Disc Management

FORMATTING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Choosing the Recording Format of a Brand-New

DVD-RW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Reformatting a Disc Manually . . . . . . . . . . . . . . . . . . . . . 28

SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 29

PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . 30

Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

E7PCAUD_DR420KU_EN.indd

2/6/2009 10:55:21 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

Playback

Editing

INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 49

Structure of Disc Contents. . . . . . . . . . . . . . . . . . . . . . . . . 49

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 51

Playing Back an Audio CD and a CD-RW/-R with

INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 66

Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

DELETING TITLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

CREATING/DELETING PLAYLIST . . . . . . . . . . . . . . . . . . 69

Adding Titles to a Playlist. . . . . . . . . . . . . . . . . . . . . . . . . . 69

Erasing All Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Deleting a Part of a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Combining Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Setting or Releasing the Title Protection . . . . . . . . . . . 79

Setting or Clearing All Chapter Marks at Once. . . . . . 80

MP3/JPEG Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Using the Title/Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . 53

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 54

Skipping TV Commercials During Playback. . . . . . . . . 54

Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 55

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Chasing Playback during Recording . . . . . . . . . . . . . . . 57

Simultaneous Playback and Recording. . . . . . . . . . . . . 58

SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Title/Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

REPEAT/RANDOM/PROGRAM PLAYBACK/

Function Setup

LIST OF THE DEFAULT SETTINGS . . . . . . . . . . . . . . . . . 81

GENERAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

SLIDE SHOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

SELECTING THE FORMAT OF AUDIO AND VIDEO . . 63

Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 63

Switching Virtual Surround System . . . . . . . . . . . . . . . . 64

Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 64

Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Adjusting Black Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Others

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . 97

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

E7PCAUD_DR420KU_EN.indd

2/6/2009 10:55:22 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES

This unit not only plays back DVD and CD, but also offers features for you to record on DVD and edit them after that. The

following features are offered with this unit.

Recording

Compatibility

Available for playing back discs on a regular DVD player:

Recorded discs can be played back on regular DVD players,

including computer DVD drives compatible with DVD-video

playback. Although DVD+RW/+R are playable on other units

without finalization in most cases, it is recommended to

finalize in order to stabilize the performance.

This unit is compatible with recording on DVD-RW/+RW

which is recordable repeatedly and DVD-R/+R which accept

the additional recordings until the disc becomes full but

not overwritable. You can choose either one for your

convenience.

Up to 12 program recording:

You can program the unit to record up to 12 programs,

within a month in advance. Daily or weekly program

recordings are also available.

Others

Progressive scan system

Unlike conventional interlace scanning, the progressive scan

system provides less flickering and images in higher

resolution than that of traditional television signals.

HDMI (High-Definition Multimedia Interface)

You can enjoy clearer audio/video output when connecting

this unit to a display device with an HDMI-compatible port.

One-touch timer recording (OTR):

You can easily set a recording time as you prefer. Every time

[REC I] is pressed during recording, the recording time will

be increased by 30 minutes up to 8 hours. The recording

automatically stops when the recording time you set is

reached.

DV dubbing:

This function helps you to easily dub the contents of the DVC

(digital video camcorder) to DVD.

Left channel stereo recording:

This unit can record the sound of the left channel monaural

input as left and right channels automatically (the input

from the L2 jacks only).

Symbols Used in this Owner’s Manual

To specify for what disc type each function is, we put the

following symbols at the beginning of each item to operate.

Automatic chapter mark setting:

Chapter marks will be put on recordings as you set before

attempting to record.

Symbol Description

Automatic title menu making:

For Recording, Playing Back, and Editing

Description refers to DVD-RW in video mode

The unit creates title menu automatically when finalizing discs.

Automatic playlist making:

The unit creates a playlist automatically after recording VR

mode DVD-RW.

Description refers to DVD-RW in VR mode

Description refers to DVD-R in video mode

Description refers to DVD+RW

Automatic title finalizing:

For video mode DVD-RW/-R and DVD+R recording, you can

finalize discs automatically after finishing all timer recordings

or at the end of the disc space if you set this in the main menu.

Description refers to DVD+R

For Playback only

Playback

Theater surround sound in your home:

When connecting the unit to an amplifier or a decoder which is

compatible with Dolby Digital or DTS, you can experience the

theater surround sound from discs with surround sound system.

Description refers to DVD-video

Description refers to audio CD

Quick search for what you want to watch:

You can easily find the part you want to watch using the

search function. Search for a desired point on a disc by title,

chapter/track or time.

Virtual surround system:

You can enjoy stereophonic space through your existing 2

channel stereo system.

Description refers to CD-RW/-R with MP3 ﬁles

Description refers to CD-RW/-R with JPEG ﬁles

If you do not ﬁnd any of the symbols listed above under the

function heading, the operation is applicable to all media.

Playing back MP3/JPEG files:

You can enjoy MP3/JPEG files which are recorded on

CD-RW/-R.

Editing

Deleting titles:

You can delete titles which you do not need anymore.

Setting or clearing chapter marks:

You can set or clear chapter marks on titles.

Hiding chapters:

To keep others from playing back some chapters without

permission, you can hide chapters.

Deleting parts of titles:

You can delete a specific part of a title.

Dividing or combining titles:

You can divide or combine a title.

Editing title names:

You can change the title name you prefer.

E7PCAUD_DR420KU_EN.indd

2/6/2009 10:55:22 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES

Discs for Recording, Playing back

Disc type

Logo

DVD-RW

DVD-R

DVD+RW

DVD+R

Automatically

formatted in

video mode

Automatically

formatted in

+VR mode

Automatically

formatted in

+VR mode

Can be formatted in VR or video

mode

Format

Video Mode

VR Mode

Icon

Maximum record 480 min (12cm) 480 min (12cm) 480 min (12cm) 480 min (12cm) 480 min (12cm)

time 144 min (8cm)

144 min (8cm)

1X-6X

Disc Speed

Versions

1X-16X

Ver.2.0/ 2.1

Ver.1.1/ 1.2

1X-4X

1X-16X

Ver.1.1/ 1.2 CPRM compatible

Playable on

DVD+RW

compatible

players.

Finalization

recommended.

(title menu will

be created)

Playable on

most DVD

players.

Playable on

most DVD

players.

Playable on

most DVD

Playable only

on VR mode

players.

Compatibility Finalization

necessary.

compatible unit. Finalization

Finalization necessary.

recommended. (title menu will

be created)

Finalization

recommended.

(title menu will

be created)

(title menu will

be created)

Recording Features

Record TV

✓

programs

Reuse by deleting

the current

contents

✓

Record 16:9 size

pictures

✓

Record copy-once

programs

✓*

Create chapters

at fixed intervals

(auto chapter)

✓

Editing Features

Scene delete

Playlist Original

✓

Edit title name

✓

Create chapters

wherever you like

(chapter mark)

✓

Divide a title

Combine titles

Hide chapters

Delete a title

✓

Create a

playlist

Protect a title

✓: Available

Gray: Not available

*CPRM compatible disc only.

E7PCAUD_DR420KU_EN.indd

2/6/2009 10:55:22 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES

Discs for playing back

DVD-VIDEO

Disc Type

Logo

CD-DA

CD-RW

CD-R

Icon

Files for playing back

MP3

Type of title

Icon

JPEG

Media

CD-RW/-R

is a trademark of DVD Format/Logo Licensing Corporation. Following discs are recommended for good recording

quality and are proven to be compatible with this unit.

However, depending on the media condition, the unit

may not read the disc properly.

* This unit cannot play back the disc contents protected

by Windows Media Digital Rights Management (DRM).

Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x

Unplayable Discs

JVC

DVD-RW 4x

Maxell

SONY

TDK

DVD+R 4x/8x/16x, DVD-R 8x/16x

DVD+R 4x/8x/16x, DVD+RW 4x

DVD+R 4x/8x/16x

The following discs will not play back on this unit.

• CD-ROM

• Compact Disc-Interactive (CD-I)

• Video Single Disc (VSD) • DVD-ROM

Performance of any other discs are not guaranteed.

• DVD-audio

• Unfinalized disc

• Toshiba is not liable for any damage or loss caused directly

or indirectly by the malfunction of this recorder, including,

without limitation, any one of the following:

• Failure to record contents intended to be recorded by

the consumer.

• DVD-RW/-R recorded in non compatible recording format

• Blu-ray Disc

• HD DVD

On the following disc, the sound may not be heard.

• Super audio CD - Only the sound on the CD layer can be

heard. The sound on the high-density super audio CD

layer cannot be heard.

• Failure to edit contents as intended by the consumer.

• When a DVD-RW/-R, DVD+RW/+R disc created on this

recorder is used (e.g., insertion, playback, recording or

editing) in another DVD player, recorder or personal

computer drive.

Color Systems

• When a DVD-RW/-R, DVD+RW/+R disc that is used in

the manner described in the immediately preceding

bullet point is used again in this recorder.

• When a DVD-RW/-R, DVD+RW/+R disc that was

recorded in another DVD recorder, or in a personal

computer drive is used in this recorder.

• Some functions may not work with personal computer

discs.

• Discs recorded in this recorder may not operate as

expected on other DVD players, recorders or personal

computer drives.

DVD is recorded in different color systems throughout

the world. The most common color system is NTSC

(which is used primarily in the United States and Canada).

This unit uses NTSC, so DVD you play back must be

recorded in the NTSC system. You cannot play back DVD

recorded in other color systems.

Region Codes

This unit has been designed to play back DVD

with region 1. DVD must be labeled for ALL

regions or for region 1 in order to play back on

the unit. You cannot play back DVD that are

labeled for other regions. Look for the symbols

on the right on your DVD. If these region

symbols do not appear on your DVD, you cannot

play back the DVD in this unit.

Because of problems and errors that can occur during the

creation of DVD and CD software and/or the manufacture

of DVD and CD discs, Toshiba cannot assure that this DVD

Video Recorder will successfully play every disc bearing the

DVD and CD logos. If you happen to experience any

difficulty playing a DVD and/or CD disc on this DVD Video

Recorder, please contact Toshiba Customer Service.

The number inside the globe refers to region of the world.

A DVD labeled for a specific region can only play back on

the unit with the same region code.

DVD players with

are capable of playing DVD-RW

recorded in VR mode.

10 EN

E7PCAUD_DR420KU_EN.indd 10

2/6/2009 10:55:23 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FUNCTIONAL OVERVIEW

Front Panel

1080p

1080i

720p

480p

DVD VIDEO RECORDER DR420

ON/STANDBY

OPEN/CLOSE

SKIP

STOP

PLAY

REC

S-VIDEO VIDEO

DV IN

15 14* 13 12

6. SKIP G button

11 10

(*) The unit can also be turned on by pressing these buttons.

1. I/y ON/STANDBY button

• Press to turn on the unit, or to turn the unit into the

standby mode. (To completely shut down the unit, you

must unplug the AC power cord.)

• If timer programmings have been set, press to turn the unit

into the timer-standby mode.

2. Disc tray

• Place a disc when the disc tray is opened.

3. A OPEN/CLOSE button*

• During playback, press to skip to the next chapter or track.

• During playback, press and hold for 1.5 seconds to fast

forward.

• When playback is paused, press to play back advance step

by step.

• When playback is paused, press and hold for 1.5 seconds to

slow forward.

7. Display

• Press to open or close the disc tray.

4. Infrared sensor window

• Receive signals from your remote control so that you can

control the unit from a distance.

5. SKIP H button

• Refer to “FRONT PANEL DISPLAY GUIDE” on page 17.

8. HDMI indicator

• Lights up and indicates the HDMI video resolution when

HDMI output is on.

9. DV IN jack (L3)

• During playback, press once midway through a chapter or

track to go back to the beginning of the current chapter

or track. When pressed twice in quick succession, playback

will start from the preceding chapter or track.

• During playback, press and hold for 1.5 seconds to fast

reverse.

• When playback is paused, press to play back reverse step

by step.

• When playback is paused, press and hold for 1.5 seconds to

slow reverse.

• Use to connect the DV output of external device with a DV

cable.

10. AUDIO input jacks (L2)

• Use to connect external device with an RCA audio cable.

11. VIDEO input jack (L2)

• Use to connect external device with an RCA video cable.

12. S-VIDEO input jack (L2)

• Use to connect the S-video output of external device with

an S-video cable.

13. I REC button

• Press once to start a recording. Press repeatedly to start

one-touch timer recording.

14. B PLAY button*

• Press to start or resume playback.

15. C STOP button

• Press to stop playback or recording.

Rear Panel

VIDEO VIDEO

IN OUT

HDMI OUT

PB/CB

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO AUDIO OUT

S-VIDEO

1. VIDEO IN jack (L1)

• Use to connect external device with an RCA video cable.

2. VIDEO OUT jack

• Use to connect a TV monitor, AV receiver or other device

with an RCA video cable.

3. COMPONENT VIDEO OUT jacks

• Use to connect a TV monitor with component video inputs

with a component video cable.

4. HDMI OUT jack

• Use an HDMI cable to connect to a display with an HDMI

compatible port.

7. S-VIDEO OUT jack

• Use to connect the S-video input of a TV monitor, AV

receiver or other device with an S-video cable.

8. AUDIO OUT jacks

• Use to connect a TV monitor, AV receiver or other device

with an RCA audio cable.

9. S-VIDEO IN jack (L1)

• Use to connect the S-video output of external device with

an S-video cable.

10.AUDIO IN jacks (L1)

• Use to connect external device with an RCA audio cable.

5. AC Power Cord

• Connect to a standard AC outlet to supply power to this

unit.

• Unplug this cord from the AC outlet to completely shut

down the unit.

6. COAXIAL DIGITAL AUDIO OUTPUT jack

• Use to connect an AV receiver, Dolby Digital decoder, DTS

decoder or other device with a digital audio coaxial input

jack with a digital audio coaxial cable.

Note

• Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

EN 11

E7PCAUD_DR420KU_EN.indd 11

2/6/2009 10:55:23 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FUNCTIONAL OVERVIEW

Remote Control

Installing the Batteries in the Remote

Control

Using a Remote Control

Keep in mind the following when using the remote

control:

Make sure that there are no obstacles between the remote

control and the infrared sensor window on the unit.

• Remote operation may become unreliable if strong

sunlight or fluorescent light is shining on the infrared

sensor window of the unit.

• Remote control for different devices can interfere with

each other. Avoid using remote control for other device

located close to the unit.

Install the batteries (AAx2) matching the polarity

indicated inside battery compartment of the remote

control.

•

Open the cover.

• Replace the batteries when you notice a fall off in the

operating range of the remote control.

• The maximum operable ranges from the unit are as

follows.

- Line of sight: approx. 23 feet (7m)

- Either side of the center:

approx. 23 feet (7m) within 30°

Insert batteries.

1080p

1080i

720p

480p

DVD VIDEO RECORDER DR420

ON/STANDBY

OPEN/CLOSE

DVD -RW/-R/+RW/+R RECORDING

30˚

23feet (7m)

Make sure to match + and - on the batteries to

the marks indicated in the battery compartment.

OPEN/

INPUT

CLOSE SELECT

HDMI

Close the cover.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Caution:

ENTER

Never throw batteries into a fire.

Note:

CLEAR

RETURN

SKIP

REV

FWD

SKIP

• Be sure to use AA size batteries.

• Dispose of batteries in a designated disposal area.

PAUSE

PLAY

STOP

• Batteries should always be disposed of with the

environment in mind. Always dispose of batteries in

accordance with applicable laws and regulations.

• If the remote control does not operate correctly, or if

the operating range becomes reduced, replace

batteries with new ones.

11*

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

• When necessary to replace batteries in the remote

control, always replace both batteries with new ones.

Never mix battery types or use new and used

batteries in combination.

SE-R0265

• Always remove batteries from remote control if they

are dead or if the remote control is not to be used for

an extended period of time. This will prevent battery

acid from leaking into the battery compartment.

12 EN

E7PCAUD_DR420KU_EN.indd 12

2/6/2009 10:55:24 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FUNCTIONAL OVERVIEW

( ) The unit can also be turned on by pressing these buttons.

1. INPUT SELECT button

16. I/y ON/STANDBY button

• Press to select the appropriate input.

2. OPEN/CLOSE A button*

• Press to open or close the disc tray.

3. Number/Character buttons

• Press to select a title/chapter/track/file on display.

• Press to enter values for the settings in the main

menu.

• Press to enter title names.

4. SETUP button

• Press to display the main menu.

• During DVD playback, press and hold for more than

3 seconds to switch the progressive scanning mode

• Press to turn on the unit, or to turn the unit into the

standby mode. (To completely shut down the unit,

you must unplug the AC power cord).

• If timer programmings have been set, press to turn

the unit into the timer-standby mode.

17. SATELLITE LINK button

• Press to turn the unit into the satellite link standby

mode.

• In the satellite link standby mode, press to cancel the

mode and to turn the unit on.

18. TIMER PROG. button

• Press to display the timer programming list.

to the interlace mode. (Though

output mode switches to the interlace and

” will be displayed on the front panel

appears, the

19. AUDIO

button

• Press to display the audio menu during playback.

20. DISPLAY button

• Press to display the display menu on or off.

21. MENU/LIST button

• Press to display the disc menu. To change original

and playlist on the TV screen.

22. ENTER button

“

display briefly.)

5. TOP MENU button

• Press to display the title list.

6. Cursor K / L / { / B buttons

• Press to select items or settings.

7. CLEAR button

• Press to confirm or select menu items.

• Press to clear the password once entered, to cancel

the programming for CD, to clear the selecting

marker number in the display menu, etc.

8. SKIP H button

23. RETURN button

• Press to return to the previous displayed menu

screen.

24. SKIP G button

• During playback, press to return to the beginning of

the current chapter, track or file.

• During playback, press twice in quick succession to

skip to the previous chapter or track.

• When playback is in pause, press repeatedly to

reverse the playback step by step.

9. REV E button

• During playback, press to fast reverse playback.

• When playback is in pause, press to slow reverse

playback.

10. PAUSE F button

• Press to pause playback or recording.

11. PLAY B button*

• Press to start playback or resume playback.

12. TIME SLIP button

• During playback, press to skip to the next chapter,

track or file.

• When playback is in pause, press repeatedly to

forward the playback step by step.

25. FWD D button

• During playback, press to fast forward playback.

• When playback is in pause, press to slow forward

playback.

26. STOP C button

• Press to stop playback or recording.

• Press to exit from the title list.

27. INSTANT SKIP button

• During playback, press to skip 30 seconds.

28. 1.3x/0.8x PLAY button

• During playback, press to play back in a slightly

faster/slower speed while keeping the sound output.

29. ZOOM button

• Press once to start recording the TV program you

are watching. Press again to watch the content

being recorded from the beginning while recording

continues. (VR mode DVD-RW with the recording

mode of LP, EP or SLP only)

• During playback, press to enlarge the picture on the

TV screen.

30. REC I button

13. REPEAT button

• Press to display the repeat menu.

14. REC MODE button

• Press to switch the recording mode.

15. HDMI button

• Press once to start a recording.

• Press repeatedly to start the one-touch timer

recording.

• Press to set the HDMI video resolution.

EN 13

E7PCAUD_DR420KU_EN.indd 13

2/6/2009 10:55:24 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

This unit uses the following on-screen displays and menus to guide you to the easy operations.

The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.

The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.

On-Screen Display / Menu

-RW VR ORG

L1 (Rear)

Disc Information/Menu

Title Name Information

(only when DVD+RW/+R, VR mode DVD-RW/-R, or

unfinalized Video mode DVD-RW/-R is in playback)

1:53

File Name Information

* This is an example screen only for explanation.

(only when a CD with MP3/

JPEG files is in playback)

1. Indicates a disc type and format mode.

2. Indicates a type of titles for VR mode DVD-RW .

3. Indicates a selected external input mode.

4. Indicates a recording mode and possible recording

time left.

5. Indicates a title number / total number of titles, chapter

number / total number of chapters, elapsed time and

total time of disc playback.

MP3 Tag Information

(only when a MP3 file is in playback)

HDMI Information

(only for the images output through the HDMI output)

6. Each icon means:

: Search

: Audio

: Subtitle

: Angle

: Marker

: Noise Reduction / Black Level

: Zoom

: Surround

: Repeat

7. Indicates an operation status.

Note

• In some descriptions on this manual, only one disc

type is indicated as an example.

14 EN

E7PCAUD_DR420KU_EN.indd 14

2/6/2009 10:55:24 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

Title/File Name Information

HDMI Information

Title name information

Title Name

Video Info.

Audio Info.

480p

YCbCr

My Title

Bitstream

File name information

File Name

My File

*1. Indicates the resolution of the HDMI output image.

*2. Indicates the HDMI video format.

*3. Indicates the HDMI audio format.

* “- - -” will be displayed, when it does not have any

information.

MP3 Tag Information

• First, track name will be displayed.

Track Name

• If you press [DISPLAY] one more time, artist name will

be displayed.

Artist Name

• If you press [DISPLAY] one more time, album name

will be displayed.

Album Name

• If there is no artist, track or album name, “Not Available”

will be displayed.

EN 15

E7PCAUD_DR420KU_EN.indd 15

2/6/2009 10:55:25 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

Main Menu

Press [SETUP] to display the main menu. Then use

1. General Setting:

To go to general setting menu.

2. Timer Programming:

To program a timer recording.

3. Title List:

[K / L] to select a menu and press [ENTER] to display the

menu. These menus provide entries to all main functions

of the unit.

To call up the title list.

Setup

4. DVD Menu:

To set up the DVD setting.

5. DISC Playback Mode:

To set up the disc playback setting.

• “DISC Playback Mode” is available only when an audio

CD, a CD-RW/-R with MP3 / JPEG files is inserted into

the unit.

General Setting

Timer Programming

Title List

DVD Menu

DISC Playback Mode

General Setting Menu

1. Playback:

General Setting

To set up the unit to play back discs as you prefer.

2. Display:

To set up the OSD screen as you prefer.

3. Video:

To set up the video setting.

4. Recording:

Playback

Display

Video

Recording

Clock

HDMI

Reset All

To set up the unit to record to discs as you prefer.

5. Clock:

To set up the clock of the unit as you need.

6. HDMI:

To set up the HDMI connection setting.

7. Reset All:

To reset the setting to the factory default.

DVD Menu / DISC Playback Mode

1. Format (DVD-RW, DVD+RW only):

Allows you to format the disc.

DVD Menu

2. Finalize:

Format

Finalize

Disc Protect OFF

Allows you to finalize a disc containing recorded titles.

3. Disc Protect (VR mode DVD-RW, DVD+RW/+R only):

Allows you to protect a disc from accidental editing or

recording.

Delete All Playlists

4. Delete All Playlists (VR mode DVD-RW only):

Allows you to delete playlist.

5. Random Play:

Allows you to activate the random playback feature.

6. Program Play: (Audio CD only)

Allows you to activate the program playback feature.

7. Music:

Allows you to make settings for MP3 playback.

8. Photo:

When an Audio CD is inserted:

DISC Playback Mode

Random Play

Program Play

Allows you to make settings for JPEG playback.

9. Slide Show: (JPEG files only)

Allows you to select the display time of the slide show

mode.

When a JPEG / MP3 disc is inserted:

DISC Playback Mode

Music

Photo

Random Play

Slide Show

16 EN

E7PCAUD_DR420KU_EN.indd 16

2/6/2009 10:55:25 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FRONT PANEL DISPLAY GUIDE

BS CS

HDD

4. Displays the following

• Elapsed playback time

: Appears in the afternoon with the clock display.

• Current title / chapter / track / file number

• Recording time / remaining time

• Clock

• Selected external input position

• Remaining time for one-touch timer recording

• Selected HDMI video resolution

2. Title / track and chapter mark

: Appears when indicating a title / track number.

: Appears when indicating a chapter number.

3. Current status of the unit

: Appears when playback is paused.

: Appears when playing back a disc.

: Appears when the timer programming or OTR

has been set and is proceeding.

: Flashes when all timer recordings have been

finished.

: Appears during recording process.

: Flashes when a recording pauses.

: Appears when a disc is in this unit.

Display Message

Appears when the disc tray is

opening.

Appears when HDMI video

resolution (480p) is selected.

Appears when HDMI video

resolution (720p) is selected.

Appears when the disc tray is

closing.

Appears when a disc is loaded

on the disc tray.

Appears when HDMI video

resolution (1080i) is selected.

Appears when data is being

recorded on a disc.

Appears when HDMI video

resolution (1080p) is selected.

EN 17

E7PCAUD_DR420KU_EN.indd 17

2/6/2009 10:55:25 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Read this first:

1) Disconnect the AC power cords of the devices from the AC outlet.

2) Make the connection as illustrated below.

3) After making all the connections, connect the AC power cords of the devices.

• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures

may be distorted due to the copy protection system.

•

When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

Connecting to an External Tuner

RCA video cable

RCA audio cable

VIDEO IN

RCA video

cable

VIDEO VIDEO

IN OUT

AUDIO OUT VIDEO OUT

AUDIO IN

RCA audio

cable

external tuner

AUDIO IN

(L1)

S-VIDEO

AUDIO OUT

ANT.OUT ANT. IN

satellite

dish

rear of this unit

ANT. IN

VIDEO VIDEO

IN OUT

RF coaxial cable

HDMI OUT

PB/CB

S-VIDEO

PR/CR

OUT

COAXIAL

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

DIGITAL AUDIO OUTPUT

UDIO OUT

S-VIDEO

PCM BITSTREAM

cable TV

company

After making the connection as described above, make sure to select the appropriate input type by following the

steps on page 26.

Note

• Required cables and connecting methods differ depending on the external tuner.

For more information, please contact your external tuner provider.

With this setup:

• You can record any unscrambled channel by selecting the channel on the external tuner. Be sure that the external

tuner is turned on.

• You cannot record one channel while watching another channel.

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

TV Connection Overview

Refer to

If Your TV has

If your device has

only an ANT. IN jack

Higher

Quality

HDMI IN

page

ANT. IN

page

COMPONENT VIDEO IN

S-VIDEO IN

page

Standard

Quality

AUDIO IN VIDEO IN

18 EN

E7PCAUD_DR420KU_EN.indd 18

2/6/2009 10:55:26 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Connecting to a TV with an HDMI^TMCompatible Port

HDMI IN

HDMI cable

HDMI OUT

rear of this unit

VIDEO VIDEO

OUT

HDMI OUT

PB/CB

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO AUDIO OUT

S-VIDEO

Do not tilt the connector when inserting it into the HDMI jack, and make sure the

shapes of the jack and the connector are matched.

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

HDMI Video Resolution and Actual Output Signals

Press [HDMI] to select the HDMI video resolution. The video resolution changes as follows every time [HDMI] is

pressed.

Front Panel Display Video Output Signal

480 Progressive

Press [HDMI]

720 Progressive

Press [HDMI]

1080 interlaced

Press [HDMI]

1080 Progressive

Press [HDMI]

• The HDMI mode that is not supported by display device will be skipped.

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the

display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital

content protection system). HDCP is copy protection technology that comprises data encryption and authentication

of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device

(or AV amplifier) for more information.

Note for HDMI Connection

• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate

properly with this unit.

• When using an HDCP-incompatible display device, the image will not be viewed properly.

• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit

can be controlled by another device via the HDMI connector.

• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI

converter cable, the signals are output in digital RGB.

• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur.

Please check and set the HDMI setting again.

EN 19

E7PCAUD_DR420KU_EN.indd 19

2/6/2009 10:55:26 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Connecting to a TV with Component Video Input jacks

COMPONENT

VIDEO IN

(Green)

(Blue)

RCA component

video cable

(Blue)

P^B

/CB

PB/CB

(Red)

/CR

PR/CR

COMPONENT

VIDEO OUT

VIDEO IN

VIDEO

OUT

AUDIO IN

RCA audio

cable

AUDIO OUT

rear of this unit

VIDEO VIDEO

OUT

HDMI OUT

PB/CB

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO AUDIO OUT

S-VIDEO

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

Connecting to a TV with an S-Video Input Jack

VIDEO IN

AUDIO IN

VIDEO

OUT

RCA audio cable

S-VIDEO IN

S-video cable

AUDIO OUT

OUT

S-VIDEO

rear of this unit

VIDEO VIDEO

OUT

HDMI OUT

PB/CB

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO AUDIO OUT

S-VIDEO

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

20 EN

E7PCAUD_DR420KU_EN.indd 20

2/6/2009 10:55:26 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Connecting to a TV with Audio / Video Input Jacks

VIDEO IN

RCA video cable

VIDEO

OUT

AUDIO IN

RCA audio cable

AUDIO OUT

rear of this unit

VIDEO VIDEO

OUT

HDMI OUT

PB/CB

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO AUDIO OUT

S-VIDEO

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Connecting to a TV without Audio / Video Input Jacks

ANT. IN

Set channel 3 or 4

rear of this unit

VHF / UHF

antenna

VIDEO VIDEO

OUT

HDMI OUT

PB/CB

S-VIDEO

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

UDIO OUT

S-VIDEO

VIDEO VIDEO

IN OUT

external tuner

RCA video cable

RCA audio cable

cable TV

company

ANT.OUT ANT. IN

AUDIO OUT VIDEO OUT

AUDIO IN

(L1)

S-VIDEO AUDIO OUT

RCA audio cable

RF coaxial cable

RCA video cable

RF coaxial cable

ANT. IN

AUDIO IN VIDEO IN

CHANNEL

TO TV

RF modulator

Set channel 3 or 4

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Note

• RF modulator is not supplied with this unit. You need to purchase it at your local store.

• The quality of picture may become poor if this unit is connected to an RF modulator.

EN 21

E7PCAUD_DR420KU_EN.indd 21

2/6/2009 10:55:27 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Digital Audio Connection

Coaxial Cable Connection

Dolby Digital decoder

rear of this unit

COAXIAL

VIDEO VIDEO

OUT

digital audio

coaxial cable

HDMI OUT

PB/CB

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO AUDIO OUT

S-VIDEO

COAXIAL

DIGITAL AUDIO OUTPUT

PCM / BITSTREAM

digital audio

coaxial input jack

HDMI Audio Connection

AV receiver / ampliﬁer with an HDMI input jack

rear of this unit

VIDEO VIDEO

IN OUT

HDMI OUT

HDMI IN

PB/CB

HDMI cable

S-VIDEO AUDIO OUT

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO

HDMI OUT

To set up “HDMI Audio”, refer to pages 82 and 91-92.

No supplied cables are used in these connections:

Please purchase the necessary cables at your local store.

Multi Channel Digital Audio Setting

To set up “Dolby Digital”, refer to pages 81 and 83-85.

Setting in the Setup Menu

Actual Audio Output

Dolby Digital Setting

of this unit (refer to

page 85)

DTS Setting of

this unit

(refer to page 85)

DIGITAL AUDIO

OUTPUT

Audio Format (disc)

HDMI OUT

Stream

PCM

—

Dolby Digital

2 channel PCM

DTS

Dolby Digital

2 channel PCM

DTS

Dolby Digital

DTS

OFF

—

No output

Stream

PCM

2 channel PCM

LPCM

22 EN

E7PCAUD_DR420KU_EN.indd 22

2/6/2009 10:55:27 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Note

• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by

an MD or DAT deck.

• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround

sound as heard in the movie theaters.

• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the

original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.

• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

• For audio CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.

If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select

“Stream” in “Dolby Digital” setting (Refer to page 85).

• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit

length) maybe limited by the device that is connected.

• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections

with device such as this unit, audio signals are not output from the HDMI output connector.

• If the connected equipment is not compatible with HDMI BITSTREAM, DTS sound will not be output.

2 Channel Analog Audio Connection

stereo system

VIDEO

OUT

analog audio

input jacks

rear of this unit

VIDEO VIDEO

IN OUT

HDMI OUT

AUDIO IN

PB/CB

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO AUDIO OUT

S-VIDEO

AUDIO OUT

RCA audio cable

AUDIO OUT

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

EN 23

E7PCAUD_DR420KU_EN.indd 23

2/6/2009 10:55:27 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIAL SETTING

When you turn on this unit for the first time, you need to follow these steps after you have completed all the

connections.

After you have made all the

necessary connections, press

[I/y ON/STANDBY] to turn on the

unit.

OPEN/

INPUT

CLOSE SELECT

HDMI

Turn on your TV.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

SATELLITE

LINK

Press the button on the TV’s remote

control that accesses the external

input channel. It may be labeled

“SOURCE”, “AV” or “SELECT” (refer to

your TV’s user manual). Or press “2”

on the TV’s remote control, then

press channel down button

repeatedly until you see the “Initial

Setting” menu.

PQRS

TUV

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

ENTER

CLEAR

RETURN

Initial Setting

SKIP

REV

FWD

SKIP

OSD Language

English

Français

Español

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Select the language for Setup display.

REPEAT REC MODE REC

ZOOM

Use [K / L] to select your desired

language, then press [ENTER] to set

language.

Press [ENTER] to activate “Clock

Setting”.

SE-R0265

Initial Setting

Clock Setting

- - -

- -

- - - - ( - - - )

- - - - - -

ENTER: Set Clock.

RETURN: Exit Initial Setting.

Proceed to step 4 in “Clock Setting”

on page 25.

24 EN

E7PCAUD_DR420KU_EN.indd 24

2/6/2009 10:55:27 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTING THE CLOCK

Set the clock before you try the timer programming.

Clock Setting

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select “Clock”, then

press [ENTER].

“Clock” menu will appear.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

SATELLITE

LINK

PQRS

TUV

Use [K / L] to select calendar or time,

then press [ENTER].

TIMER

PROG.

SPACE

Clock Setting

SETUP DISPLAY AUDIO

MENU/LIST

JAN / 01 / 2009 ( THU )

12 : 00 AM

TOP MENU

Use [{ / B] to select an item to set,

and use [K / L] to select the contents

to suit your preference, then press

[ENTER].

ENTER

CLEAR

RETURN

SKIP

REV

FWD

SKIP

Clock Setting

PAUSE

PLAY

STOP

JAN / 01 / 2009 ( THU )

12 : 00 AM

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Your setting will be activated.

The clock start counting when you press

[ENTER].

REPEAT REC MODE REC

ZOOM

Press [SETUP] to exit.

SE-R0265

Note

• Your clock setting will be lost if either there is a power

failure or this unit has been unplugged for more than

30 seconds.

• For setting the day, year, hour and minute,

[the Number buttons] can also be used.

• You can set the built-in calendar from the year 2008

up to 2058.

EN 25

E7PCAUD_DR420KU_EN.indd 25

2/6/2009 10:55:28 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS FOR THE VIDEO INPUT

You must let the unit know which video input jack you are using before making a recording.

Press [SETUP].

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select “General

Setting”, then press [ENTER].

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Use [K / L] to select “Video”, then

press [ENTER].

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

Use [K / L] to select “Select Video”,

then press [ENTER].

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Use [K / L] to select the desired

external input position, then press

ENTER

CLEAR

RETURN

5 _[ENTER].

SKIP

REV

FWD

SKIP

Use [K / L] to select the input jack

type to connect, then press [ENTER].

PAUSE

PLAY

STOP

If you want to use VIDEO IN jack, select “Video

In”, then press [ENTER].

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

If you want to use S-VIDEO IN jack, select

“S-Video In”, then press [ENTER].

REPEAT REC MODE REC

ZOOM

General Setting

Playback

Display

Video

Progressive

TV Aspect

Recording

Clock

HDMI

L1 (Rear) Select Video

Video In

S-Video In

Reset All

SE-R0265

Press [SETUP] to exit.

26 EN

E7PCAUD_DR420KU_EN.indd 26

2/6/2009 10:55:28 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FORMATTING A DISC

Choosing the Recording Format of a Brand-New DVD-RW

When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will

always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording

format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the

desired mode. You can also manually format a DVD-RW once it has been used.

Press [SETUP].

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select “DVD Menu”,

then press [ENTER].

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Setup

General Setting

Timer Programming

Title List

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

DVD Menu

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

Use [K / L] to select “Format”, then

press [ENTER].

TOP MENU

DVD Menu

Format

Finalize

ENTER

CLEAR

RETURN

Use [K / L] to select “Format Mode”,

then press [ENTER].

SKIP

REV

FWD

SKIP

DVD Menu

PAUSE

PLAY

STOP

Format

Finalize

Start

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Format Mode

REPEAT REC MODE REC

ZOOM

Use [K / L] to select “Video mode” or

“VR mode”, then press [ENTER].

Press [SETUP] to exit.

SE-R0265

Insert a brand-new disc.

Formatting will start.

Formatting

90%

Note

• The recording format setting is effective only for

DVD-RW. You cannot change the recording format

for a DVD-R and DVD+RW/+R.

• You cannot mix two formats on one DVD-RW disc. If

you insert a disc that has been formatted before, the

recording format is not changed if you select another

format in the “Setup” menu only. To reformat a disc

(change disc format type), refer to “Reformatting a

Disc Manually” on page 28.

Formatting is completed.

“100%” is indicated.

EN 27

E7PCAUD_DR420KU_EN.indd 27

2/6/2009 10:55:28 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FORMATTING A DISC

Reformatting a Disc Manually

If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for

either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.

Insert a recordable disc.

Press [SETUP].

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Use [K / L] to select “DVD Menu”,

then press [ENTER].

SATELLITE

LINK

PQRS

TUV

Setup

General Setting

Timer Programming

Title List

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

DVD Menu

TOP MENU

Use [K / L] to select “Format”, then

press [ENTER].

e.g.) VR mode DVD-RW

ENTER

DVD Menu

CLEAR

RETURN

Format

Finalize

Disc Protect OFF

SKIP

REV

FWD

SKIP

Delete All Playlists

PAUSE

PLAY

STOP

Use [K / L] to select “Start”, then

press [ENTER].

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

DVD Menu

REPEAT REC MODE REC

ZOOM

Format

Finalize

Start

Disc Protect OFF

Delete All Playlists

Format Mode

Selection menu will appear and prompt you to

confirm.

• For DVD+RW, use [K / L] to select “Yes”, then

press [ENTER].

SE-R0265

Use [K / L] to select “Yes”, then press

[ENTER].

Formatting will start.

If you want to cancel formatting, select “No”.

Are you sure?

Yes

Note

• When you reformat the disc, the contents of the disc

are erased.

Formatting is completed.

“100%” is indicated.

• For DVD-RW, make sure that the recording format is

set to the desired mode. (See steps 1 to 6 in

“Choosing the Recording Format of a Brand-New

DVD-RW” on page 27.)

• This unit may not be able to reformat a disc that is

not previously formatted by this unit e.g. DVD disc

formatted by PC or another recorder.

Formatting

100%

28 EN

E7PCAUD_DR420KU_EN.indd 28

2/6/2009 10:55:28 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTING A DISC TO PROTECT

To prevent accidental recording, editing or erasing the

titles, you can protect them from “DVD Menu” menu.

Press [SETUP].

Use [K / L] to select “DVD Menu”,

then press [ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Use [K / L] to select “Disc Protect

OFF ON”, then press [ENTER].

e.g.) VR mode DVD-RW

SATELLITE

LINK

PQRS

TUV

DVD Menu

TIMER

PROG.

SPACE

Format

Finalize

Disc Protect OFF

SETUP DISPLAY AUDIO

MENU/LIST

Delete All Playlists

TOP MENU

ENTER

CLEAR

RETURN

Use [K / L] to select “Yes”, then press

[ENTER].

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

Protect this disc?

Yes

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

A disc will be protected.

REPEAT REC MODE REC

ZOOM

This operation may take

awhile to be completed.

SE-R0265

Note

To cancel the disc protect:

• When you insert a disc protected with this unit,

“Disc Protect ON OFF” will appear instead of “OFF

ON”.

DVD Menu

Format

Finalize

Disc Protect ON

OFF

Delete All Playlists

To release the protection for the disc, select “Disc

Protect ON OFF” at step 3, then follow rest of the

procedures.

EN 29

E7PCAUD_DR420KU_EN.indd 29

2/6/2009 10:55:29 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYING THE DISCS IN OTHER DVD PLAYERS

Auto Finalizing

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[ENTER].

“General Setting” menu will appear.

You can finalize discs automatically using this function.

You can use this function to finalize discs after finishing

timer recordings and at the end of the disc space.

Use [K / L] to select “Recording”,

then press [ENTER].

“Recording” menu will appear.

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Use [K / L] to select “Auto Finalize”,

then press [ENTER].

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

Use [K / L] to select “Disc Full” or

“End of Timer Rec”, then press

[ENTER].

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

Auto Finalize

TOP MENU

Disc Full

End of Timer Rec

ENTER

CLEAR

RETURN

Use [K / L] to select “ON”, then press

[ENTER].

SKIP

REV

FWD

SKIP

Disc Full

PAUSE

PLAY

STOP

OFF

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

End of Timer Rec

REPEAT REC MODE REC

ZOOM

OFF

Your setting will be activated.

Press [SETUP] to exit.

SE-R0265

Note

• This function is not available after finishing daily or

weekly program recording.

30 EN

E7PCAUD_DR420KU_EN.indd 30

2/6/2009 10:55:29 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYING THE DISCS IN OTHER DVD PLAYERS

Finalizing a Disc

Press [SETUP].

You will need to finalize discs to play back on other DVD

players.

Finalizing may take several minutes up to an hour.

Since the process of the finalization fills empty space of

the disc, a shorter recording period on the disc will

require a longer time period for finalization. Do not

unplug the power cord during finalization.

Use [K / L] to select “DVD Menu”,

then press [ENTER].

“DVD Menu“ menu will appear.

Use [K / L] to select “Finalize”, then

press [ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select “Yes”, then press

[ENTER].

e.g.) VR mode DVD-RW

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

SATELLITE

LINK

Finalize disc?

PQRS

TUV

Yes

TIMER

PROG.

SPACE

Finalizing will start.

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

ENTER

CLEAR

RETURN

Finalizing

90%

SKIP

REV

FWD

SKIP

This operation may take

awhile to be completed.

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Finalizing is completed.

REPEAT REC MODE REC

ZOOM

SE-R0265

EN 31

E7PCAUD_DR420KU_EN.indd 31

2/6/2009 10:55:30 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYING THE DISCS IN OTHER DVD PLAYERS

To cancel finalizing...

Note

(DVD-RW only)

• Finalizing a disc in video mode and +VR mode

automatically creates a title menu.

Press [STOP C] during the finalizing is in progress. Use

[K / L] to select “Yes”, then press [ENTER]. Finalizing is

canceled and the unit switches to stop mode.

• After you finalize the DVD+RW, you can call up the

title list by pressing [TOP MENU], or you can call up

the title menu by pressing [MENU/LIST].

• Even after DVD+RW is finalized, you can still record

or edit. After you finalize DVD-RW/-R or DVD+R, you

cannot edit or record anything else on that disc.

Do you want to cancel ?

Yes

• If you insert a DVD-RW finalized with this unit, “Undo

Finalization” will appear instead of “Finalize” at

step 3.

• To release the finalization of the DVD-RW disc, select

“Undo Finalization” at step 3.

Finalizing

If “ ” appears when [STOP C] is pressed, you cannot

cancel finalizing because the finalizing has already

reached at a critical point in its process.

If “No” is selected and [ENTER] or [RETURN] is pressed,

finalizing is continued.

DVD Menu

Format

Undo Finalization

Disc Protect OFF

Delete All Playlists

You cannot cancel finalizing a DVD-R, DVD+R and

DVD+RW once it has started.

• To undo the finalization of the DVD+RW, make an

additional recording onto the disc.

• DO NOT power off during finalizing. This may result

in a malfunction.

• For DVD+RW, if you have added or deleted chapters,

or made chapters hidden, you must finalize the disc

before being able to see those effects on other units.

To play back discs other than DVD+RW on other DVD

players, you will need to finalize.

32 EN

E7PCAUD_DR420KU_EN.indd 32

2/6/2009 10:55:30 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION ON DVD RECORDING

Recording Mode

Restrictions on Recording

You can select a recording mode among 5 options, and

the recording time will depend on the recording mode

you select as follows.

You cannot record copy-protected program using this

unit. Copy-protected video signal is included in DVD-

videos, some satellite broadcasts, some pay-per-view

stations and some “premium” stations.

If copy-protected material is detected, recording will

pause or stop automatically and an error message

appears on the screen.

Recording time

12cm 8cm

Video/

Sound Quality

Recording mode

SLP

60 min 18 min

120 min 36 min

240 min 72 min

360 min 108 min

480 min 144 min

“Copy-once only” video can only be recorded to CPRM

compatible DVD-RW formatted in VR mode.

What is “CPRM”?

CPRM is a copy protection system with scramble system

regarding the recording of “copy-once” broadcast

programs. CPRM stands for Content Protection for

Recordable Media.

• The recording times listed above are estimates and are

for reference purposes only. Actual recording times may

vary.

• The audio and video quality of content being recorded

may differ depending on the recording mode/recording

time chosen.

This unit is CPRM compatible, which means that you can

record copy-once broadcast programs, but you cannot

make another copy of those recordings. CPRM recordings

can only be made on CPRM compatible DVD-RW formatted

in VR mode, and CPRM recordings can only be played back

on DVD players that are specifically compatible with CPRM.

Note

Making discs playable in other DVD players (Finalize)

For DVD-RW/-R, it is necessary to finalize the disc after

recording, in order to play back the disc on other DVD

players. (Refer to pages 30-32.) For DVD+RW/+R, it is

recommended to finalize the disc in order to make the

disc more compatible to other DVD player. When video

and +VR mode disc are finalized, a title menu is created.

You cannot finalize discs in other DVD recorders.

• This unit cannot record to CD-RW or CD-R.

• DVD-RW/-R, DVD+RW/+R and CD-RW/-R recorded on

a personal computer or a DVD or CD recorder may

not be played back if the disc is damaged or dirty or

if there is condensation on the player’s lens.

• If you record a disc using a personal computer, even

if it is recorded in a compatible format it may not be

played back because of the settings of the

application software used to create the disc. (Check

with the software publisher for more detailed

information.)

• Discs recorded in video mode on this unit cannot

record additional information using other DVD

recorders.

• Since the recording is made by the VBR (variable bit

rate) method, depending on the picture you are

recording, the actual remaining time for recording

may be a little shorter than the remaining time

displayed on the TV screen.

EN 33

E7PCAUD_DR420KU_EN.indd 33

2/6/2009 10:55:30 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS FOR A RECORDING

Make Recording Compatible

Setting for Auto Chapter

Use this feature to make the discs recorded on other unit

recordable on this unit. When you make an additional

recording on this unit with “Make Recording Compatible”

set to “ON”, the title list is automatically converted to our

style.

You can set a specified time for chapter marks.

1) Press [SETUP] and use [K / L] to select “General

Setting”, then press [ENTER].

2) Use [K / L] to select “Recording”, then press [ENTER].

“Recording” menu will appear.

1) Press [SETUP] and use [K / L] to select “General

Setting”, then press [ENTER].

3) Use [K / L] to select “Auto Chapter”, then press

[ENTER].

2) Use [K / L] to select “Recording”, then press

[ENTER].

“Recording” menu will appear.

4) Use [K / L] to select a desired time option, then

press [ENTER].

3) Use [K / L] to select “Make Recording Compatible”,

then press [ENTER].

Auto Chapter

OFF

5 minutes

10 minutes

15 minutes

30 minutes

60 minutes

4) Use [K / L] to select “ON” or “OFF”, then press

[ENTER].

Make Recording Compatible

OFF

5) Press [SETUP] to exit.

ON:

Title list will be replaced when you make

additional recordings to the discs recorded by

other units.

Note

• The interval for auto chapter may be up to two

minutes different from the time option you set.

OFF: Prohibiting additional record to the disc that

• A blank chapter may be created depending on the

remaining time of the disc.

has a title list created by other units.

5) Press [SETUP] to exit.

Note

• This function is also available for unfinalized DVD+R.

34 EN

E7PCAUD_DR420KU_EN.indd 34

2/6/2009 10:55:31 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS FOR A RECORDING

Recording Audio Select (XP)

Setting Aspect Ratio for Video Mode

Recording

You can enjoy high quality sound recording. This function

works only when the recording mode is set at XP.

You can set aspect ratio for video mode recording.

1) Press [SETUP] and use [K / L] to select “General

Setting”, then press [ENTER].

1) Follow step 1 to 2 on “Recording Audio Select(XP)”.

2) Use [K / L] to select “Aspect Ratio (Video mode)”,

then press [ENTER].

2) Use [K / L] to select “Recording”, then press

[ENTER].

“Recording” menu will appear.

3) Use [K / L] to select your desired setting, then press

[ENTER].

3) Use [K / L] to select “Recording Audio Select (XP)”,

then press [ENTER].

Aspect Ratio (Video mode)

Auto

4 : 3

4) Use [K / L] to select “PCM” or “Dolby Digital”, then

press [ENTER].

16 : 9

Auto (default): It will be recorded with whichever the

ratio that the program you started to record are

broadcasted with.

Recording Audio Select (XP)

PCM

Dolby Digital

4:3 : Recorded in the aspect ratio of 4:3.

16:9 : Recorded in the aspect ratio of 16:9.

PCM:

Records PCM audio for the best quality sound.

Dolby Digital:

4) Press [SETUP] to exit.

Records Dolby Digital audio for good quality sound.

Note

• For DVD-RW VR mode, the image will be recorded in

whichever the ratio that the program you record are

broadcasted with, regardless of the “Aspect Ratio

(Video mode)” setting.

• For DVD+RW/+R, the image will always be recorded

in aspect ratio of 4:3.

5) Press [SETUP] to exit.

Note

• “PCM” stands for Pulse Code Modulation. It changes

analog sound to digital sound without compressing

audio data.

• When the recording mode is set at other than XP, the

unit records “Dolby Digital” audio automatically even

if you selected “PCM”.

EN 35

E7PCAUD_DR420KU_EN.indd 35

2/6/2009 10:55:31 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Follow the steps to record TV programs.

Press [I/y ON/STANDBY].

Turn on the TV and be sure to select the input to

which the unit is connected.

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its

label facing up.

OPEN/

INPUT

HDMI

CLOSE SELECT

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

Align the disc to

the disc tray guide.

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Press [OPEN/CLOSE A] to close the

disc tray.

ENTER

It may take awhile to load

the disc completely.

CLEAR

RETURN

• When inserting a brand-new DVD-RW or

DVD+RW, the unit automatically starts to

format.

• If titles have been recorded on the disc, the

title list is displayed. Press [STOP C] to exit the

title list.

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

Press [REC MODE] repeatedly to

select a recording mode.

Refer to “Recording Mode” on page 33.

SE-R0265

1:53

Press [INPUT SELECT ] to select the

appropriate external input position

(L1/L2) to which your external tuner

is connected. Then select the desired

channel to record on the external

tuner.

36 EN

E7PCAUD_DR420KU_EN.indd 36

2/6/2009 10:55:31 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Press [REC I] to start recording.

“I” will be displayed for 5 seconds.

Press [STOP C] to stop recording.

The recorded title will be included in the title list.

(Refer to “Guide to a Title List” on page 66.)

e.g.) DVD+R/DVD-RW/-R

1:53

Press [PAUSE F] to pause recording.

Press [PAUSE F]] or [REC I] again to restart

recording.

Wait for a moment

90%

This operation may take

awhile to be completed.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks

of 30 minutes.

Press [REC I] repeatedly until the desired recording

time (30 minutes to 8 hours) appears on the TV screen.

One-touch timer recording will start.

0:30

(normal recording)

1:00

8:00

7:30

• To change the recording length during one-touch

timer recording, press [REC I] repeatedly until the

desired length appears.

• To cancel one-touch timer recording within the

specified time, press [STOP C].

Note

• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.

• When the unit clock has not been set, the space for a date and time of title names will be blank.

• You cannot change the recording mode during the recording pause mode.

Note for one-touch timer recording

• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press

[DISPLAY] to see it on the TV screen.

• Unlike the timer recording, you can perform the following operations during one-touch timer recording.

- Turning the unit into the standby mode (One-touch timer recording will be canceled.).

- Using [REC I] or [STOP C] on the remote control.

• You cannot use the pause function during one-touch timer recording.

• When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to

the timer-standby mode automatically if a timer recording has been programmed. Press [I/y ON/STANDBY] to

cancel the timer-standby mode to use the unit continuously.

EN 37

E7PCAUD_DR420KU_EN.indd 37

2/6/2009 10:55:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER RECORDING

Guide to Timer Programming Display

You can program the unit to record up to 12 programs

within a month in advance. Daily or weekly program

recordings are also available.

Timer Programming

JAN/ 2/09 1:00 AM L1 SP

SP (1:00)

THU JAN/01 10:00AM

Before recording, make sure

Date

Start

End

L1/L2

• Connect the external tuner to either L1 or L2 and set it

to output audio/video signals when it comes to the time

you want to start recording.

JAN/02

1:00AM 2:00AM

New Program

• Do not change the external tuner’s channel while you

are recording. You cannot watch one channel and

record another at the same time.

• Set the clock before setting a timer programming.

• Insert a recordable disc with enough recordable space.

1/1

1. Title of a Timer Program (Contains date, time, external

input, recording mode of the program)

2. Current date and time

3. Recording mode and length of the recording

4. Timer program list

5. Total number of pages and current page (2 pages maximum)

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Press [TIMER PROG.].

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

Use [K / L] to select “New Program”,

then press [ENTER].

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

Timer Programming

TOP MENU

THU JAN/01 10:00AM

Date

Start

End

L1/L2

New Program

ENTER

CLEAR

RETURN

1/1

SKIP

REV

FWD

SKIP

• If there are 6 or more programs, use

[SKIP j / i] to change pages.

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

Note

• If you have not set the clock yet:

“Clock Setting” menu will appear instead of the timer programming list at step 1. Continue with the step 3 in

“Clock Setting” on page 25 before setting a timer programming.

• Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu.

• You cannot make a program whose recording time exceeds 12 hours.

• Cancel the timer-standby mode by pressing [I/y ON/STANDBY] before operation. When finished operating, press

[I/y ON/STANDBY] to resume the timer-standby mode.

38 EN

E7PCAUD_DR420KU_EN.indd 38

2/6/2009 10:55:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER RECORDING

Use [K / L] to enter the date, then

press [B].

Auto recording mode select...

When “Auto” is selected as a recording mode, the unit

calculates how much time is available on the disc and

determines the appropriate recording mode to

complete recording the program.

Date

JAN/02

L1/L2

Start

- - : - -

Mode

End

- - : - -

2 : 00

Date

JAN/02

L1/L2

Start

1 : 00AM

Mode

End

JAN/01

Daily

2 : 00AM

Auto

When pressing [L] at

the current date, the

date will change as

follows.

Auto

1 : 00

MON-SAT

MON-FRI

SAT

• “Auto” is only available for one program in the timer

program list.

• The recording may be cut short, when the available

recording space of the disc is too limited.

e.g.) January 1st

FRI

SUN

Press [ENTER] when all items are

entered.

JAN/31

After displaying an instructive message for 10

seconds, timer program list will appear.

Use [K / L / { / B] or [the Number

buttons] to enter the start and end

time, then press [B].

Press ON/STANDBY toTimer Standby mode.

Ensure the external source is turned to

the correct channel.

Date

JAN/02

L1/L2

Start

1 : 00AM

Mode

End

- - : - -

Timer Programming

JAN/ 2/09 1:00 AM L1 SP

2 : 00

SP (1:00)

Date

JAN/02

THU JAN/01 10:00AM

Start

End

L1/L2

• You cannot make a program whose recording

time exceeds 12 hours.

1:00AM 2:00AM

Your program setting is stored.

• To set another program, repeat steps 2 to 7.

• To exit, press [TIMER PROG.] or [SETUP].

• When 2 or more programs are overlapped,

“Timer program overlapped” appears, and the

overlapped program will be displayed in blue.

To correct the timer program refer to

“Checking, canceling, or correcting the timer

programming information” on page 40.

Use [K / L] to select an appropriate

external input (L1/L2) to which your

external tuner is connected, then

press [B].

Date

JAN/02

L1/L2

Start

1 : 00AM

Mode

End

2 : 00AM

1 : 00

Press [I/y ON/STANDBY] to set a

timer programming.

will appear on the front panel display, while this

unit waits to make the recording.

Use [K / L] to select a recording

mode.

Date

JAN/02

L1/L2

Start

1 : 00AM

Mode

End

2 : 00AM

HDD

1 : 00

Refer to “Recording Mode” on page 33.

• You can check the remaining recordable space

of the disc when you select the recording

mode.

Date

JAN/02

L1/L2

Start

1 : 00AM

Mode

End

2 : 00AM

1 : 00

EN 39

E7PCAUD_DR420KU_EN.indd 39

2/6/2009 10:55:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER RECORDING

To stop the timer recording in progress

If the timer program did not complete correctly,

the error number appears in the timer

programming list.

1) Press [STOP C] on the remote control.

Confirmation message will appear.

Timer Programming

2) Select “Yes”, then press [ENTER].

THU JAN/01 10:00AM

Date

Start

End

L1/L2

• To stop the timer recording immediately, press

[C STOP] on the unit.

E41 JAN/02

1:00AM 2:00AM

New Program

Checking, canceling, or correcting the timer

programming information

1/1

Each error number means:

E1-22 Recording error other E40

E37-39 than below

1) Press [I/y ON/STANDBY].

Some portion has

not been recorded

because of program

overlapping.

Recording did not

start at the start time.

2) Press [TIMER PROG.].

E23-24 Unrecordable disc

3) Check the information on the list you want to edit.

E25-28 Copy prohibited program

Timer Programming

E29

E30

Disc protected

Disc full

E41

E42

E43

Power failed

JAN/ 2/09 1:00 AM L1 SP

No disc when recording

SP (1:00)

Date

JAN/02

THU JAN/01 10:00AM

Start

End

L1/L2

E31-32 Already 99 titles

recorded

Already 49 titles

recorded

1:00AM 2:00AM

New Program

E33

E34

E35

E36

Already 999 chapters E44

recorded

Already 254 chapters

recorded

No space for Control E45

information

Copy prohibited

program

1/1

PCA full *1

E46

It is impossible to

4-A) To delete the timer program:

record additionally

on a disc recorded

by other units

1 Use [K / L] to select the program you want to

Already finalized

video format disc

delete, then press [ENTER].

2 Use [K / L] to select “Delete”, then press

when setting

“Make Recording

Compatible” to “OFF”.

[ENTER].

Selection menu will appear.

3 Use [K / L] to select “Yes”, then press [ENTER].

4-B) To correct the timer program:

• A program with the error number is grayed in the timer

programming list.

• Once the timer programming list with error line(s) is

displayed, or after canceling and setting again the timer

standby mode, the program line(s) with error will be

cleared.

1 Use [K / L] to select the program you want to

correct, then press [ENTER].

2 Use [K / L] to select “Program Change”, then

press [ENTER].

3 Correct the timer program by using

[K / L / { / B], then press [ENTER].

*1 PCA is a disc's space reserved for recording test.

5) Press [TIMER PROG.] to exit.

6) Press [I/y ON/STANDBY] to return to the timer

standby mode.

Note

• Press [TIMER PROG.] to check the timer recording in

progress.

When the timer recording is proceeding, that

program will be highlighted in red. In this case, you

cannot select any other program.

40 EN

E7PCAUD_DR420KU_EN.indd 40

2/6/2009 10:55:34 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER RECORDING

Hints for Timer Recording

• If there is a power failure or this unit has been

unplugged for more than 30 seconds, the clock setting

and all timer programming will be lost.

• If a disc is not inserted or if a inserted disc is not

recordable (finalized DVD-RW/-R, finalized DVD+RW, a

• To cancel the timer standby mode, press

I/y ON/STANDBY].

• When the starting and the ending time are the same,

“Exceeds 12 hours” appears and the program setting will

not be accepted.

• When the programmed starting and ending time are

earlier than the current time, the setting will not be

accepted.

[

fully recorded disc, etc.),

on the front panel display

flashes and timer recording cannot be performed. In

some cases,

will appear momentarily around the start

point as the unit attempts to record. Please insert a

recordable disc.

• If the starting time is earlier and the ending time is later

than the current time, the recording will start right after

• When all the timer recording is completed, flashes. To

[

I/y ON/STANDBY] is pressed.

play back or eject the recorded disc, press

• “Press ON/STANDBY for timer recording” will appear on

the TV screen 5 minutes before the programmed

starting time.

[I/y ON/STANDBY] first, then select the recorded title and

press [PLAY B], or [OPEN/CLOSE A] to remove the disc.

• During timer recording or timer standby mode ( will

appear), any operations on the unit will not be available.

To make these operations available, press [STOP C] or

[C STOP] to stop the timer recording or

[

I/y ON/STANDBY] to cancel timer standby mode (

will disappear).

The Priority of Overlapped Settings

This unit records the programs according to priority if the timer programmings are overlapped. The timer

programming set previously has priority.

A timer recording of lower priority will be canceled or start from the middle.

Check the overlapped timer programmings and change the priority if necessary.

When the starting time is the same:

A program set previously (PROG. A) has priority.

When the starting time and the ending time

for each programs are diﬀerent:

A program that has earlier start time has priority.

PROG. A

PROG. B

PROG. C

actual

recording

actual

recording

PPRROOGG. A. A

PROG. A

PROG. C

PROG.

PROG. B

The ﬁrst 2 minutes (at the longest) will be cut oﬀ.

When the recording time is partially overlapped:

PROG. A will start after PROG. B is complete to

be recorded.

When the recording time is entirely overlapped:

PROG.A will not be recorded.

PROG. A

PROG. B

actual

recording

PROG. B

PROG.B

PROG.A

recording

The ﬁrst 2 minutes (at the longest) will be cut oﬀ.

Note for DVD recording

When the end time of the programming

currently being recorded and the start time

of the subsequent program are same:

The beginning of the PROG. B may be cut oﬀ.

• When the recording time of 2 programs are overlapped, or

the end time of a program and the start time of another

program is the same, the first 2 minutes (at the longest) of

the subsequent program will be cut off.

• If the cut-off portion comes up to 3 minutes or more, this

program will be displayed with errors number E40 in the

timer programming list.

PROG. A

PROG. B

actual

recording

PROG. A

PROG. B

The ﬁrst 2 minutes (at the longest) will be cut oﬀ.

EN 41

E7PCAUD_DR420KU_EN.indd 41

2/6/2009 10:55:34 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SATELLITE LINK

You can set the unit to start recording whenever it

Select the desired recording mode.

(Refer to “Recording Mode” on page

33.)

detects the video signal from the external tuner.

Preparing for the satellite link timer recording:

Preparation on the tuner

• The external tuner should be equipped with some kind

of timer function. Using timer function of the tuner, set

it to output audio/video signals when it comes to the

time you want to start recording, and stop output audio/

video signals when it comes to the time you want to

finish recording. Refer to the tuner’s manual on how to

set the timer.

• Make sure to set the satellite link standby mode when

you finish setting.

Preparation on this unit

Press [SATELLITE LINK].

In a second, the unit will be turned into the

standby mode automatically as it goes into the

satellite link standby mode.

To cancel the satellite link function while in

the satellite link standby mode:

Press [SATELLITE LINK] or [I/y ON/STANDBY].

To cancel the satellite link function while the

satellite link recording is in progress:

• You must let the unit know which video input jack you

are using before making a recording.

Press [STOP C].

Refer to “SETTINGS FOR THE VIDEO INPUT” on page 26.

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

ENTER

CLEAR

RETURN

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

SE-R0265

42 EN

E7PCAUD_DR420KU_EN.indd 42

2/6/2009 10:55:35 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SATELLITE LINK

Note

• If the signal of external input breaks up over 5 seconds, satellite link function will be canceled.

• You cannot set the start or the end time for the satellite link timer recording on this unit.

• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer

recording.

• You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 44 for more

information.

• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are

recorded as illustrated below.

example 2

example 1

example 3

timer

recording

timer

recording

timer

recording

satellite link

actual

recording

actual

recording

actual

recording

The ﬁrst 2 minutes (at the longest) will be cut oﬀ.

EN 43

E7PCAUD_DR420KU_EN.indd 43

2/6/2009 10:55:35 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS FOR AN EXTERNAL DEVICE

Connection to an External Device

Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).

When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front).

Use S-video or the RCA audio/video cables for this connection.

When connecting a DVC (digital video camcorder), use the DV IN jack on the front panel instead of S-VIDEO IN or

VIDEO IN jack.

S-VIDEO

OUT

VIDEO

OUT

AUDIO OUT

DV-OUT

AUDIO OUT

VIDEO

OUT

S-VIDEO

OUT

external device

(camcorder, VCR etc.)

S-video

cable

RCA

video

cable

RCA

DV cable

(4-pin)

S-video

RCA

audio cable

RCA

video

cable

audio

cable

VIDEO VIDEO

IN OUT

S-VIDEO

VIDEO

DV IN

S-VIDEO

AUDIO IN

(L1)

to L2 & L3

to L1

VIDEO

1080p

1080i

720p

480p

HDMI OUT

DVD VIDEO RECORDER DR420

OPEN/CLOSE

ON/STANDBY

SKIP

STOP

PLAY

REC

PR/CR

OUT

COAXIAL

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

AUDIO IN

(L1)

COMPONENT

VIDEO OUT

S-VIDEO

S-VIDEO VIDEO

DV IN

rear of this unit

front of this unit

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

44 EN

E7PCAUD_DR420KU_EN.indd 44

2/6/2009 10:55:35 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS FOR AN EXTERNAL DEVICE

Recording from an External Device

Turn on the TV and press

[I/y ON/STANDBY], and be sure to

select the input of the TV to which

the unit is connected.

Before recording from an external device, refer to the

instructions for the connection on page 44.

Press [OPEN/CLOSE A] to open the disc

tray. Place the disc to record properly.

Press [OPEN/CLOSE A] again to close

the disc tray.

OPEN/

INPUT

HDMI

CLOSE SELECT

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

It takes awhile to load

the disc.

SATELLITE

LINK

PQRS

TUV

Select the input of the unit which the

external device is connected. (L1, L2

or DV(L3))

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

• To use the input jacks on the rear of this unit;

Select “L1 (Rear)” by using [INPUT SELECT ].

TOP MENU

• To use the input jacks on the front of this unit;

Select “L2 (Front)” or “L3 (DV-IN)“ by using

[INPUT SELECT ].

ENTER

CLEAR

RETURN

Press [REC MODE] repeatedly to

select a recording mode.

SKIP

REV

FWD

SKIP

Refer to “Recording Mode” on page 33.

PAUSE

PLAY

STOP

Press [I REC] on the unit to start

recording.

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

Start playback on the external device

to record from.

Press [C STOP] on the unit to stop

recording.

This operation may take

awhile to be completed.

1080p

1080i

720p

480p

DVD VIDEO RECORDER DR420

ON/STANDBY

OPEN/CLOSE

SKIP

STOP

PLAY

REC

S-VIDEO VIDEO

DV IN

EN 45

E7PCAUD_DR420KU_EN.indd 45

2/6/2009 10:55:35 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DV DUBBING

Guide to DV and On-Screen Display

This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit.

You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or

reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is

compliance with the IEEE1394 standards. When you connect to DV IN jack on the front of this unit, select “L3

(DV-IN)” position by using [INPUT SELECT ] on the remote control and press [DISPLAY] to show the DV dubbing

information for the operation of your DVC.

When the DVC is

in video mode...

When the DVC is not

in camera mode...

RW VR ORG

-RW VR ORG

The menu changes according to

what mode of DVC.

Switch the mode on the DVC to

playback mode for the dubbing

information.

L3 (DV-IN)

AB-1234

0:12:34

Control

DV Audio

Start Rec

DVD

Stereo1

L3 (DV-IN)

AB-1234

0:12:34

1:00

The following instructions are described with the operations using the remote control of this unit.

1. DV icon

6. Product name of your DVC

2. Indicator of active device

• When the “Control” is

• If the unit cannot recognize the

input signal from the DVC or the

unknown product, “No Device” or

“****” will appear instead.

7. Status of the current operation

and the time counter

highlighted, press [ENTER] to

display the item selection. Use

[K / L] to select the device you

wish to operate, then press

[ENTER] to activate.

Each icon means (Available icons

may vary depending on the DVC):

• Select “DVD” to control this unit.

• Select “DVC” to control your DVC.

3. Recording audio mode

• Other than the DVC is in stop

mode, the “DV Audio” can be

selected. Press [ENTER] to display

the item selection and then use

[K / L] to select the audio you

wish to output. Press [ENTER]

again to activate.

DVC is in stop mode.

DVC is in playback mode.

DVC is in pause mode.

DVC is fast forwarding.

(in stop mode)

DVC is fast reversing.

(in stop mode)

DVC is fast reversing.

(standard speed)

DVC is fast reversing.

(faster than above)

DVC is fast forwarding.

(standard speed)

DVC is fast reversing.

(faster than above)

DVC is in slow reverse

playback.

DVC is fast forwarding.

(faster than above)

DVC is fast forwarding.

(faster than above)

DVC is slow forwarding.

(standard speed)

DVC is slow forwarding.

(faster than above)

• Select “Stereo1” to dub the stereo

sound.

• Select “Stereo2” to dub the sound

with after recording sound.

• Select “Mix” to dub the stereo1

and stereo2.

4. Indicator of dubbing function

• When the unit is ready for

dubbing, “Start Rec” will appear.

• When the unit is in dubbing,

“Pause Rec” will appear.

DVC is in recording.

DVC is in recording pause

mode.

DVC is slow forwarding.

(faster than above)

5. Channel position

• When you select “L3 (DV-IN)” by

using [INPUT SELECT ], “L3

(DV-IN)” will appear.

46 EN

E7PCAUD_DR420KU_EN.indd 46

2/6/2009 10:55:36 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DV DUBBING

DVC to DVD Dubbing

Press [REC MODE] repeatedly to

select a recording mode.

(Refer to “Recording Mode” on page 33.)

Before recording from DVC, see page 44 for connection

instructions.

Press [DISPLAY].

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

With “Control” highlighted, press

[ENTER] to display the available

devices to control with the remote

control of this unit. Use [K / L] to

select “DVC”, then press [ENTER].

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

-RW VR ORG

Control

DV Audio

Start Rec

DVD

Stereo1

L3 (DV-IN)

AB-1234

0:12:34

TOP MENU

ENTER

1:00

CLEAR

RETURN

Now you can operate your DVC with the remote

control of this unit.

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

Press [PLAY B] to start playing back

the DVC, and find the point where

you wish to start dubbing.

Then, press [STOP C] when you come

to the desired start point.

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

Use [K / L] to select “Start Rec”, then

press [ENTER].

The dubbing will start.

SE-R0265

To stop dubbing;

Use [K / L] to select “Control”, then

press [ENTER].

Use [K / L] to select “DVD”, then

press [ENTER].

Then press [STOP C].

Preparing for DV to DVD dubbing:

• Insert a recordable disc and make sure your DVC is in

video mode.

Use [INPUT SELECT ] to select “L3

(DV-IN)”.

L3 (DV-IN)

AB-1234

0:00:00

EN 47

E7PCAUD_DR420KU_EN.indd 47

2/6/2009 10:55:37 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DV DUBBING

Note for DV dubbing

• If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.

• The unit does not send out the output signal to DVC.

• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.

• Do not connect more than 1 DVC.

• The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.

• If no video signal is detected from the DVC during DVC to DVD dubbing, the recording will be paused and “I” will

flash on the TV screen. The recording will resume when the unit detects the video signal again.

• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 46.

• You cannot dub from DVC during timer standby mode.

• During timer standby of either component, you cannot select L3(DV-IN) even on the component which is not in

timer standby.

• Date / time and cassette memory data will not be recorded.

• Pictures with a copy-guard signal cannot be recorded.

• A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire

Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark

of SONY). It enables digital dubbing between DV devices with little degradation.

48 EN

E7PCAUD_DR420KU_EN.indd 48

2/6/2009 10:55:38 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION ON PLAYBACK

Structure of Disc Contents

The contents of DVD are generally divided into titles, and the titles are subdivided into chapters.

Audio CDs are divided into tracks.

Data disc contains MP3/JPEG are divided into folders, and the folders are subdivided into files.

DVD

Title:

Divided contents of a DVD video. Roughly

corresponds to a story title in short stories.

Title 1

Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

Chapter: Divided contents of a title. This corresponds to

a chapter in a story.

Track:

Divided contents of an audio CD.

Folder:

Divided contents of a MP3/JPEG data disc.

Consists of number of files.

Audio CD

Each title, chapter, or track, folder or file is assigned a

number, which is called “title number”, “chapter number”,

“track number”, “folder number” or “file number”

respectively.

Track 1 Track 2 Track 3

Track 4 Track 5

Some discs may not have these numbers.

MP3/JPEG

folder 1

folder 2

file 4

file 1

file 2

file 3

file 5

EN 49

E7PCAUD_DR420KU_EN.indd 49

2/6/2009 10:55:38 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC PLAYBACK

Direct Playback

Press [I/y ON/STANDBY].

Turn on the TV and be sure to select the input to

which the unit is connected.

OPEN/

INPUT

HDMI

CLOSE SELECT

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its

label facing up.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

Align the disc to

the disc tray guide.

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Press [OPEN/CLOSE A] to close the

disc tray.

ENTER

CLEAR

RETURN

It may take awhile to load

the disc completely.

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

Press [PLAY B] to start playback.

If you are playing back a DVD-video, a menu

may appear.

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Refer to “Using the Title/Disc Menu” on page 53.

REPEAT REC MODE REC

ZOOM

Press [STOP C] once to stop playback

temporarily.

• Refer to “Resume Playback” on page 54.

SE-R0265

Note

• Some discs may start playback automatically.

50 EN

E7PCAUD_DR420KU_EN.indd 50

2/6/2009 10:55:38 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC PLAYBACK

Playback from the Title List

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its

label facing up.

OPEN/

INPUT

HDMI

CLOSE SELECT

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Align the disc to

the disc tray guide.

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

Press [OPEN/CLOSE A] to close the

disc tray.

SETUP DISPLAY AUDIO

MENU/LIST

It may take awhile to load

the disc completely.

TOP MENU

ENTER

Press [TOP MENU].

Title list will appear.

Press [MENU/LIST] to switch Original/Playlist if

necessary.

• To exit the title list, press [STOP C].

• To resume the title list, press [TOP MENU].

CLEAR

RETURN

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Use [K / L / { / B] to select a desired

title, then press [ENTER].

REPEAT REC MODE REC

ZOOM

e.g.) VR mode DVD-RW original

Title List

ORG

JAN/ 1/09 1:00AM L1 SP

1:00AM (0:12:00)

JAN/ 1/09

L1 SP

SE-R0265

1 / 6

Use [K / L] to select “Play From

Start”, then press [ENTER].

Press [I/y ON/STANDBY].

Play From Start

Edit

Title Delete

Add To Playlist

Turn on the TV and be sure to select the input to

which the unit is connected.

Playback will start.

Press [STOP C] once to stop playback

temporarily.

• Refer to “Resume Playback” on page 54.

To eject the disc, press [OPEN/CLOSE A] to

open the disc tray, then remove the disc before

turning off the unit.

Note

• You can also start playback by pressing [PLAY B]

instead of [ENTER].

• At step 4, you can press [SKIP G], or press [B]

when the title on the lower right of the title list is

highlighted to display the next page, and press

[SKIP H], or press [{] when the title on the upper

left of the title list is highlighted to display the

previous page.

EN 51

E7PCAUD_DR420KU_EN.indd 51

2/6/2009 10:55:38 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC PLAYBACK

Playing Back an Audio CD and a CD-RW/-R with MP3/JPEG Files

When selecting track/file:

Playback will start.

When selecting folder:

OPEN/

INPUT

HDMI

CLOSE SELECT

The files in the folder will appear.

Use [K / L] to select the file or folder you want to play

back, then press [ENTER].

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

• Press [PLAY B], [ENTER] or [B] to move to any lower

hierarchies.

• Press [s] or [RETURN] to move back to the previous

hierarchy.

SATELLITE

LINK

PQRS

TUV

Hints for audio CD tracks and MP3 / JPEG files:

TIMER

PROG.

SPACE

• Folders are shown by

• Audio CD tracks are shown by

SETUP DISPLAY AUDIO

MENU/LIST

• MP3 files are shown by

• JPEG files are shown by

TOP MENU

• The system can recognize up to 255 folders and, up to

99 tracks/999 files.

• Letters of a file/folder name overflowing the given space

will be displayed as “…”.

ENTER

CLEAR

RETURN

•

If there are no files in the folder, “No Files” will be displayed.

It is recommended that files to be played back in this

unit are recorded under the following specifications:

SKIP

REV

FWD

SKIP

<MP3>

PAUSE

PLAY

STOP

• Sampling frequency

• Constant bit rate

<JPEG>

: 44.1 kHz or 48 kHz.

: 112 kbps - 320 kbps.

Follow steps 1 to 2 in “Direct

Playback” on page 50.

• Upper limit

• Lower limit

• File size of image maximum : 12 MB.

: 6,300 x 5,100 dots.

: 32 x 32 dots.

Press [OPEN/CLOSE A] to close the

disc tray.

It may take awhile to load

the disc completely.

Note

• The audio source of MP3 files cannot be recorded as

digital sound by an MD or DAT deck.

When an audio CD is inserted, track list will

appear.

When you insert a CD-RW/-R mixed with MP3/

JPEG files, the playback media selection screen

will be displayed.

For MP3, select “Music”, for JPEG, select “Photo”.

When a CD-RW/-R with MP3/JPEG files is

inserted, file list will appear.

• To exit the file list, press [STOP C].

• To resume the file list, press [TOP MENU].

• Press [MENU/LIST] to call up the playback

media selection screen in stop mode.

• Files whose extension is other than “.mp3(MP3)” or

“.jpg / .jpeg(JPEG)” will not be listed.

• Some unplayable folders or files may be listed due to

the recording status.

• High-resolution JPEG files take longer to be displayed.

• Progressive JPEG files (JPEG files saved in progressive

format) cannot be played back on this unit.

• The JPEG pictures can also rotate by using [s / B].

This DVD Video Recorder requires discs/recordings to

meet certain technical standards in order to achieve

optimal playback quality. There are many different types

of recordable disc formats (including CD-R containing

MP3 files). Not all recordable discs will operate or

produce optimal playback quality. The technical criteria

set forth in this owner's manual are meant only as a

guide. Use of CD-RW for MP3 files is not recommended.

Use [K / L] to select a desired folder

or track/file, then press [ENTER].

e.g.) JPEG file list

File List

DISC NAME

JPEG file1

JPEG file2

JPEG file3

JPEG file4

JPEG file5

JPEG file6

You must obtain any required permission from

content. Toshiba cannot and does not grant such

permission.

1/ 2

52 EN

E7PCAUD_DR420KU_EN.indd 52

2/6/2009 10:55:39 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC PLAYBACK

Using the Title/Disc Menu

Pause

1)During playback, press [PAUSE F].

Playback will be paused and sound will be muted.

DVD may contain a title list, which describes the contents

of the disc, or a disc menu, which guides you through the

available functions in the disc.

1)Press [TOP MENU] or [MENU/LIST] to call up the title

list or disc menu.

2)Use [K / L / { / B] to make a selection, and then

press [ENTER] to enable your selection.

3)Press [STOP C] to exit the disc menu.

2)Press [PLAY B] to return to the normal playback.

Note

• You can select a numbered menu with [the Number

Note

buttons] also.

• Menus vary among discs. Refer to the information

accompanying the disc for details.

• [MENU/LIST] or [TOP MENU] will not always be

effective for all DVDs.

• For DVD, set “Still Mode” to “Field” in “Playback”

menu if pictures in the pause mode are blurred.

(Refer to page 86.)

EN 53

E7PCAUD_DR420KU_EN.indd 53

2/6/2009 10:55:40 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL PLAYBACK

Skipping TV Commercials During

Resume Playback

Playback

You can play back from where you stopped playing back

the disc last.

1)During playback, press [STOP C].

The resume message will appear.

You can skip TV commercials to enjoy the recorded

programs without interrupting.

During playback, press [INSTANT SKIP].

Resume ON

Normal playback will start at 30 seconds ahead from

where you press [INSTANT SKIP].

Every time you press [INSTANT SKIP], the searching

point will be extended by 30 seconds ahead.

2)Press [PLAY B].

In a few seconds, playback will resume from the point

at which it stopped last. You can resume playback at

the same point even if you turn the unit into the

standby mode.

You can press [INSTANT SKIP] up to 6 times (180 seconds).

e.g.) Press [INSTANT SKIP] once.

To cancel the resume playback and start playing back

the disc from the beginning, press [STOP C] again

while the playback is stopped.

Note

• For MP3/JPEG files, playback will resume from the

beginning of the file at which playback was stopped.

Instant Skip 30sec.

(forwarding 30 seconds)

Fast Forward / Fast Reverse Playback

1)During playback, press [FWD D] or [REV E].

Every time you press [FWD D] or [REV E],

approximate speed will be changed as follows.

Fast forward or fast reverse playback across titles (for

DVD), or files (for MP3 files) is not possible.

Playback will return to the normal playback.

FWD

normal

speed

REV

40x

20x

40x

playback

For audio CD or MP3 files, approximate speed is fixed

at 8x with sound.

2)Press [PLAY B] to return to the normal playback.

Note

• Forward/reverse speed will be indicated with icons

as follows.

forward (approx. speed)

2x:

20x:

40x:

reverse (approx. speed)

5x:

20x:

40x:

54 EN

E7PCAUD_DR420KU_EN.indd 54

2/6/2009 10:55:40 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL PLAYBACK

Rapid Playback

Slow Forward / Slow Reverse Playback

Rapid playback function is available only during

playback.

1)During playback, press [PAUSE F]. Then press

[FWD D] or [REV E].

This function is available only on discs recorded in the

Dolby Digital format, and plays back in a slightly faster/

slower speed while keeping the sound output.

Every time you press [FWD D] or [REV E],

approximate speed will be changed as follows. (The

sound will remain muted.)

1)During playback, press [1.3X / 0.8X PLAY].

FWD

REV

pause

Press [1.3X / 0.8X PLAY] once during playback.

Plays back approximately at 0.8 times of normal

playback.

B x0.8 :

B x1.3:

B :

1/4x

1/8x

1/16x

1/8x

1/3x

2)Press [PLAY B] to return to the normal playback.

Press [1.3X / 0.8X PLAY] twice during playback.

Plays back approximately at 1.3 times of normal

playback.

Note

• Forward/reverse speed will be indicated with icons

as follows.

Press [1.3X / 0.8X PLAY] thrice to play back in

normal speed.

No effects.

forward (approx. speed)

1/16x:

1/8x:

1/3x:

2)Press [PLAY B] to return to the normal playback.

reverse (approx. speed)

Note

1/16x:

1/8x:

1/4x:

• Audio (language) setting cannot be changed while

using this mode.

• This feature may not work at some point in a disc.

• Audio is LPCM (2 channel) during rapid playback.

Step by Step Playback

1)During playback, press [PAUSE F].

Playback will be paused and sound will be muted.

2)Press [SKIP i ] repeatedly.

Playback will advance one frame at a time when you

press [SKIP i ] with the sound muted.

To play back step by step backward:

Press [SKIP j ] repeatedly.

Every time you press the button, the playback will go

backward by one frame.

• Press and hold [SKIP j ] / [SKIP i ] to reverse/

advance continuously.

3)Press [PLAY B] to return to the normal playback.

EN 55

E7PCAUD_DR420KU_EN.indd 55

2/6/2009 10:55:41 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL PLAYBACK

Zoom

Marker Setting

1)During playback, press [DISPLAY] or [ZOOM].

• If you press [ZOOM], skip to step 3.

This feature allows you to assign a specific point on a disc

to be called back later.

1)During playback, press [DISPLAY] to bring up the

display menu.

If the display menu is already shown, skip to step 2.

2)Use [{ / B] to select

menu.

to display the selection

e.g.) DVD-video

2)Use [{ / B] to select

e.g.) DVD-video

to display the marker list.

0:01:00 / 1:23:45

DVD Video

0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired zoom factor to zoom,

then press [ENTER].

3)Use [K / L] to select a desired marker number.

When it reaches the desired point, press [ENTER].

0:01:00 / 1:23:45

DVD Video

× 1.2

× 1.5

× 2.0

0:01:00 / 1:23:45

DVD Video

Zoom menu will appear.

There are four options

(x1.0, x1.2, x1.5 and x2.0), these are displayed

excluding the current zoom rate.

The title (track) number and the time will be displayed.

Zoom area will be displayed.

4)To return to the marker:

Use [K / L] to select the desired marker number,

then press [ENTER].

4)Use [K / L / { / B] to select a desired zoom

position, then press [ENTER].

Note

• To clear a marker, select the marker number to be

cleared, then press [CLEAR].

• All markers will be erased when you operate these

operations listed below.

– Opening the disc tray

Zoom playback will start.

– Turning the unit into the standby mode

– Recording on a recordable disc

• You can mark up to 6 points.

Note

• When selecting a smaller factor than the current one,

the zoom area will not be displayed.

• To exit the zoom menu, press [RETURN] repeatedly.

• To cancel the zoom function, select “x1.0” using

[K / L], then press [ENTER] at step 3.

• You cannot slide the zoomed picture on some JPEG

files.

56 EN

E7PCAUD_DR420KU_EN.indd 56

2/6/2009 10:55:42 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL PLAYBACK

Chasing Playback during Recording

You can play back the already recorded part of the

currently recording program without waiting for the

recording to the end. This function works from 1

minute after the start of the recording.

Using [TIME SLIP] ...

With [TIME SLIP], even if you leave your couch while

you are watching TV through this unit, you can come

back and watch rest of the program from right where

you left at any convenient time with just one button.

Please make sure to put VR mode DVD-RW disc, and set

the recording mode to LP, EP or SLP.

1)During recording, press [PLAY B].

Playback will start from the beginning of the program

that you are currently recording.

1)While viewing a TV broadcast via this unit, press

[TIME SLIP].

Screen for the current playback:

This unit start to record the TV broadcast.

2)Press [TIME SLIP] again.

0:01:00 / 1:23:45

RW VR ORG

Playback will start from the point at which you press

[TIME SLIP] first while recording continues.

• While viewing the recorded content, you can pause

and resume the playback by pressing [TIME SLIP].

3)Press [STOP C] once to stop playback.

To stop recording, press [STOP C] again.

Resume ON

1:01

To cancel the resume, press [STOP C] again.

If you play back the fast forward playback and the

playback reaches the scene recorded 1 minute before,

the forwarding playback will automatically return to

the normal playback.

Note

• Playback image may freeze momentarily using this

function.

2)Press [STOP C] once to stop playback.

The resume message will appear.

Screen for the current recording:

However, this does not affect the recording.

• The 2x fast forward playback is not available.

• [REC I] is not available during this function.

• You must cancel this function first by pressing

[STOP C] once. Then you can use [REC I] to use

OTR (one-touch timer recording) function or change

recording time for the OTR.

1:23:45

RW VR ORG

L1 (Rear)

• “Wait for a moment.” will be displayed on the screen

if you press [PLAY B] before 1 minute of recording.

• This function is available only when you are

recording on a DVD-RW in VR mode, with the

recording mode LP, EP or SLP.

Resume ON

1:01

To stop recording, press [STOP C] again.

To cancel the resume, press [STOP C] again.

EN 57

E7PCAUD_DR420KU_EN.indd 57

2/6/2009 10:55:43 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL PLAYBACK

Simultaneous Playback and Recording

You can also play back a recorded title during current

recording or the timer recording on the same disc.

3)Press [STOP C] once to stop playback.

The resume message will appear.

Screen for the current recording:

1)During recording, press [DISPLAY].

Screen for the current recording:

1:30:25

RW VR ORG

L1 (Rear)

1:23:45

RW VR ORG

L1 (Rear)

Resume ON

1:01

2)Select

Title:

icon using [{ / B], then press [ENTER].

will be highlighted.

To stop recording, press [STOP C] again.

To cancel the resume, press [STOP C] again.

The title number next to

Enter a desired title number to search using

[K / L] or [the Number buttons], then press

[ENTER].

Note

• Playback image may freeze momentarily using this

function.

Selected title playback will start.

However, this does not affect the recording.

• The 2x fast forward playback is not available.

Chapter:

To move to

• This function is available only when you are

recording on a DVD-RW in VR mode, with the

recording mode LP, EP or SLP.

for chapter, press [B].

Enter a desired chapter number to search using

[K / L] or [the Number buttons], then press

[ENTER].

• Only the titles (chapters) in the original can be

selected.

You cannot select titles from the title list.

Selected chapter playback will start.

• When you stop the playback after the timer

recording is completed, the unit will be switched to

the timer standby mode if another program has been

set (refer to “Hints for Timer Recording” on page 41).

If you play back the currently recording program and the

playback reaches the scene recorded 1 minute before,

the forwarding playback will automatically return to the

normal playback.

58 EN

E7PCAUD_DR420KU_EN.indd 58

2/6/2009 10:55:43 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Title/Chapter Search

Track Search

Using [SKIP j ] / [SKIP i ]

1)During playback, press [SKIP i ] to skip the

1)During playback, press [SKIP i] to skip the

current title or chapter and move to the next.

current track/file and move to the next.

The title or chapter will move forward by one at a time.

• If there is no chapter in one title, the current title will

be skipped.

The track/file will move forward one at a time.

To go back to the beginning of the current track/file,

press [SKIP j ].

(For JPEG files, press it once to go to the previous file.)

To go back to the beginning of the current title or

chapter, press [SKIP j ].

Press it twice in quick successions to go to the previous

title or chapter. The title or chapter will move

backward one title at a time.

Press it twice in quick successions to go to the previous

track/file. The track/file will move backward one at a

time.

Using [DISPLAY]

1)During playback, press [DISPLAY].

1)During playback, press [DISPLAY] to bring up the

display menu.

If the display menu is already shown, skip to step 2.

2)Use [{ / B] to select

e.g.) DVD-video

, then press [ENTER].

2)Use [{ / B] to select

e.g.) audio CD

, then press [ENTER].

0:01:00 / 1:23:45

DVD Video

0:00:15 / 0:05:00

The number next to

3)Title:

Use [K / L] or [the Number buttons] to enter a

desired title number to search, then press [ENTER].

will be highlighted.

e.g.) MP3 files

0:00:15

MP3

Title search will start.

Chapter:

The number next to

will be highlighted.

Press [B] to move to the number next to

chapter.

Use [K / L] or [the Number buttons] to enter a

desired chapter number to search, then press

[ENTER].

for

3)Use [K / L] or [the Number buttons] to enter a

desired track/file number to search, then press

[ENTER].

After the search, playback will start automatically.

Note

• During CD playback, you can enter a track number

directly using [the Number buttons] for track search

without displaying the menu.

• In search mode display, total numbers of each search

contents (title/chapter/time) are shown as a

denominator.

0:01:00 / 1:23:45

DVD Video

total number

of titles

total time

of the title

total number

of chapters

EN 59

E7PCAUD_DR420KU_EN.indd 59

2/6/2009 10:55:44 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Time Search

1)During playback, press [DISPLAY] to bring up the

display menu.

If the display menu is already shown, skip to step 2.

2)Use [{ / B] to select

, then press [ENTER].

e.g.) DVD-video

0:01:00 / 1:23:45

DVD Video

e.g.) audio CD

0:00:15 / 0:05:00

The number next to

will be highlighted.

To move to the number next to

, press [B].

When time search is not available,

counter are not displayed.

and time

3)Use [K / L / { / B] or [the Number buttons] to

enter a desired time to search, then press [ENTER].

After the search, playback will start automatically.

Note

• Time search is available only in the same track, file or

title.

60 EN

E7PCAUD_DR420KU_EN.indd 60

2/6/2009 10:55:44 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW

Repeat Playback

Note

• Point B for the repeat A-B playback should be set

within the same title or track of point A.

Available repeat function may vary depending the discs.

1)During playback, press [DISPLAY] or [REPEAT] to

bring up the display menu.

If the display menu is already shown, skip to step 2.

• To cancel the repeat playback, select “OFF” at step 3.

The repeat setting will also be canceled when you

stop playback.

• If you press [REPEAT], skip to step 3.

• You cannot select “Group” during the random

playback of MP3/JPEG files.

• Chapter/Track repeat will be canceled whenever a

Chapter/Track is skipped forward or backward.

2)Use [{ / B] to select

menu.

to display the selection

• During the A-B repeat, if you reaches the point A

with any reverse playback, the reverse playback will

be canceled and the A-B repeat playback resumes

from point A.

0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired option to repeat,

then press [ENTER].

The selected repeat playback will start.

Random Playback

e.g.) DVD-video

OFF

Title

Chapter

A - B

You can play back a disc randomly instead of playing

back in the original order.

1)Press [SETUP] in stop mode.

2)Use [K / L] to select “DISC Playback Mode”, then

e.g.) audio CD

press [ENTER].

OFF

Track

All

“DISC Playback Mode” menu will appear.

For MP3, use [K / L] to select “Music”, then press

[ENTER].

A - B

For JPEG, use [K / L] to select “Photo”, then press

[ENTER].

e.g.) MP3/JPEG files

3)Use [K / L] to select “Random Play”, then press

OFF

Track

All

[ENTER].

Random playback will start.

e.g.) audio CD

Group

0:00:15 / 0:05:00

Title:

Random

The current title will be played back repeatedly.

Chapter:

The current chapter will be played back repeatedly.

All:

The current disc will be played back repeatedly.

A-B:

Note

• To cancel random playback, press [STOP C] twice

during random playback. “OFF” appears on the

display menu.

Desired section can be played back repeatedly.

1) Use [K / L] to select “A-B”, then press [ENTER].

2) Press [ENTER] at the desired starting point A.

3) Press [ENTER] at the desired ending point B.

Track:

The current track or file will be played back repeatedly.

Group:

The current folder will be played back repeatedly.

EN 61

E7PCAUD_DR420KU_EN.indd 61

2/6/2009 10:55:44 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW

Program Playback

Slide Show

You can program the disc to play back in your desired

order.

You can select the display time between 5 seconds and

10 seconds.

1)Press [SETUP] in stop mode.

1)Follow steps 1 and 2 in “Program Playback” on the

left.

2)Use [K / L] to select “DISC Playback Mode”, then

press [ENTER].

“DISC Playback Mode” menu will appear.

2)Use [K / L] to select “Photo”, then press [ENTER].

3)Use [K / L] to select “Slide Show”, then press

[ENTER].

3)Use [K / L] to select “Program Play”, then press

[ENTER].

4)Use [K / L] to select the display time, then press

[ENTER].

4)Use [K / L] to select a desired track, then press

[ENTER] or [B].

DISC Playback Mode

Program Play

5)Press [SETUP] to exit.

Note

• Large-size JPEG files take a few moments to be

displayed.

Total 0:00:00

Repeat this step until you program all the desired

tracks.

5)Press [PLAY B].

DISC Playback Mode

Program Play

09 04 10 06 --

Total 0:31:07

Program playback will start.

Note

• To erase tracks you selected, press [CLEAR] at step 4.

• You can make program settings up to 50 tracks.

• To cancel program playback, press [STOP C] twice

during program playback. “OFF” appears on the TV

screen.

• You may also select a desired track using [the

Number buttons] at step 4.

62 EN

E7PCAUD_DR420KU_EN.indd 62

2/6/2009 10:55:45 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SELECTING THE FORMAT OF AUDIO AND VIDEO

You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.

Switching Subtitles

Switching Audio Soundtrack

DVD-video may have subtitles in one or more languages.

Available subtitle languages can be found on the disc

case. You can switch subtitle languages during playback.

When playing back a DVD-video recorded with 2 or more

soundtracks (these are often in different languages), you

can switch them during playback.

When playing back audio CD, you can switch “L/R”(stereo),

“L”(left) or “R”(right).

1)During playback, press [DISPLAY].

1)During playback, press [DISPLAY] or [AUDIO ]to

bring up the display menu.

2)Use [{ / B] to select

to display the selection

menu.

If the display menu is already shown, skip to step 2.

e.g.) DVD-video

• If you press [AUDIO ], skip to step3.

0:01:00 / 1:23:45

DVD Video

2)Use [{ / B] to select

menu.

to display the selection

3)Use [K / L] to select a desired audio soundtrack or

audio channel, then press [ENTER].

3)Use [K / L] to select a desired subtitle language,

For DVD-video or VR mode DVD-RW

• Audio soundtrack will switch.

e.g.) DVD-video

then press [ENTER].

0:01:00 / 1:23:45

DVD Video

0:01:00 / 1:23:45

DVD Video

OFF

1.English

1.Dolby Digital 2ch English

2.Dolby Digital 5.1ch English

Subtitle will be displayed in the selected language.

When “OFF” is selected, subtitle will disappear.

• If the title contains both main and sub audio, you can

further select “L“ (main), “R“ (sub), “L/R“ (mixed of

main and sub).

Note

For audio CD

• Some discs will only allow you to change the subtitle

from the disc menu. Press [MENU/LIST] or

[TOP MENU] to display the disc menu.

• Audio channel will switch.

e.g.) audio CD

• If a 4-digit language code appears in the subtitle

menu, refer to the “LANGUAGE CODE” on page 98.

0:00:15 / 0:05:00

1. L/R

2. L

3. R

Note

• Some discs will only allow you to change the

soundtrack from the disc menu. Press [MENU/LIST]

or [TOP MENU] to display the disc menu.

EN 63

E7PCAUD_DR420KU_EN.indd 63

2/6/2009 10:55:45 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SELECTING THE FORMAT OF AUDIO AND VIDEO

Switching Virtual Surround System

Switching Camera Angles

Some DVD-video have scenes shot from two or more

angles. Angle information should be on the disc case if

the disc contains multi-angle scenes.

You can enjoy stereophonic virtual space through your

existing 2 channel stereo system.

1)During playback, press [DISPLAY] to bring up the

display menu.

If the display menu is already shown, skip to step 2.

1)During playback, press [DISPLAY].

2)Use [{ / B] to select

, then press [ENTER].

0:01:00 / 1:23:45

DVD Video

2)Use [{ / B] to select

menu.

to display the selection

e.g.) DVD-video

0:01:00 / 1:23:45

DVD Video

Angle icon appears when a switching camera angle is available.

Angle will switch each time you press [ENTER].

3)Use [K / L] to select “OFF”, “Type 1” or “Type 2”,

then press [ENTER].

e.g.) DVD-video

Note

• Angle icon does not appear on the TV screen if you

set “Angle Icon” to “OFF” in “Playback” menu.

Refer to page 86.

0:01:00 / 1:23:45

DVD Video

OFF

Type 1

Type 2

Reducing Block Noise

OFF

: no effect

Type 1 : natural effect

Type 2 : emphasized effect

1)During playback, press [DISPLAY].

2)Use [{ / B] to select

menu.

to display the selection

Note

e.g.) DVD-video

• Select “OFF” if sound is distorted.

0:01:00 / 1:23:45

DVD Video

• The setting will be kept when the unit is turned off.

3)Use

to, select “Noise Reduction”, then press [ENTER].

0:01:00 / 1:23:45

DVD Video

Noise Reduction OFF

Black Level OFF

4)Use [K

L] to select a desired option, then press [ENTER].

0:01:00 / 1:23:45

DVD Video

OFF

Type 1

Type 2

Your setting will be activated.

This function reduces noise in the playback picture. If

noises appear on the TV screen during playing back

discs recorded in long time recording mode such as EP

or SLP, select “Type 1” or “Type 2”.

(“Type 2” is more effective.)

When playing back discs with a few noises such as

DVD-video, select “OFF”.

64 EN

E7PCAUD_DR420KU_EN.indd 64

2/6/2009 10:55:46 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SELECTING THE FORMAT OF AUDIO AND VIDEO

Adjusting Black Level

You can adjust the black level to control the brightness

of the picture in order to get a better picture.

1)During playback, press [DISPLAY].

2)Use [{ / B] to select

menu.

to display the selection

e.g.) DVD-video

0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select “Black Level”, then press

[ENTER].

0:01:00 / 1:23:45

DVD Video

Noise Reduction OFF

Black Level OFF

4)Use [K / L] to select “OFF” or “ON”, then press

[ENTER].

Your setting will be activated.

0:01:00 / 1:23:45

DVD Video

OFF

OFF : Shows the original picture as recorded.

: Make the darker parts of the picture more

visible.

Note

• You can adjust black level setting only during

playback.

• The setting will be kept even when the unit is turned

off.

• The default setting is “ON”.

EN 65

E7PCAUD_DR420KU_EN.indd 65

2/6/2009 10:55:47 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION ON DISC EDITING

Guide to a Title List

Editing Discs

Title list allows you to check the titles recorded on the

disc easily. You can choose a title to play back from this

list and easily edit the titles as you prefer.

Edit the recorded disc

You will find editing discs is easy. This unit offers

convenient edit functions which are possible only with

DVD-RW/-R and DVD+RW/+R.

You can edit the following from a title list.

• Assigning a name to a title

• Dividing a title

Press [TOP MENU].

Title List

ORG

JAN/ 1/09 1:00AM L1 LP

12:00AM (2:00:00) JAN/ 1/08

L1 LP

• Combining titles

• Adding titles to a playlist

• Erasing all playlist

• Setting or releasing the title protection

• Adding or deleting chapter marks

• Deleting titles or parts of titles

1 / 2

2 1

(Possible editing functions depend on the recording

format and editing method.)

Edit

ORG

Original and playlist (VR mode)

For VR mode DVD-RW, you can edit the recordings in

playlist without changing the original recordings. Playlist

does not take up much disc space. After you make a

recording to VR mode DVD-RW, a playlist will be created

automatically.

Scene Delete

Edit Title Name

Chapter Mark

Protect

What “Original” or “Playlist” is for?

Throughout this manual, you will find original and playlist

which refer to the actual content and the edited version.

JAN/31/09 11:00PM L1 LP

0 : 00 : 59

11 10

• Original content refers to what’s actually recorded on

the VR mode DVD-RW.

1. Title list: List of the titles recorded on the disc, and

their information.

• For DVD+RW/+R, empty title always appears at the

last of the title list.

• For the titles being blocked by the V-chip system,

“BLOCK” will be displayed and you cannot watch the

contents.

• Playlist content refers to the edited version of the VR

mode DVD-RW; how the original content is to be played

back.

Finalizing a disc

• This will allow a disc that is recorded on this unit to be

played back on other DVD player — without finalization

it will not be playable on other DVD player.

• After finalizing a DVD-RW/-R or DVD+R, you cannot edit

any information that is on that disc.

2. The protect icon: Appears when the title has been

protected. (Original titles only)

3. Arrow: Indicating there is a previous / next page.

4. Title list icon: Indicates a type of the displayed title

• If you have recorded in DVD+RW, then editing is still

permitted after finalizing.

list.

: VR (Original)

: VR (Playlist)

5. Title name

: +VR mode

: Video mode

ORG

+VR

Using these editing functions to modify copyrighted

content for any purpose other than your private viewing

may be prohibited under the Copyright Laws of the

United States and other countries, and may subject you

to civil and criminal liability.

Video

6. Title information: Displays various information on

the selected title.

7. Submenu: Submenus for the selected menu are

displayed here.

8. Title name (editable): If you do not name the title,

the recorded date, time and the recording mode are

displayed here.

9. Progress bar: Indicating the progress of the playback.

The vertical lines in the bar indicates chapter marks,

and “L” sliding on the bar indicates current point of

playback displayed in the preview window.

10. Preview window: Preview of the selected title is

displayed here.

11. Playback status: Indicating the current playback

status of the selected title.

Press [RETURN] to exit the title list.

66 EN

E7PCAUD_DR420KU_EN.indd 66

2/6/2009 10:55:47 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DELETING TITLES

Notes for deleting titles

After the disc is fully recorded:

DVD-RW/DVD+RW

DVD-R/DVD+R

• When a title is deleted from

• When the last title is deleted from

DVD-RW in video mode or DVD+RW, the

recordable space will be increased.

• When a title is deleted from

DVD-R and DVD+R, the

recordable space will NOT be

increased.

DVD-RW in VR mode, the

recordable disc space will

be increased.

The Full-Recorded disc

Delete!

Deleted titles

cannot create

the space.

You cannot

record

a new title.

You cannot

record

a new title.

You can record

a new title.

You can record

a new title.

Once all editings are made, press [RETURN] several times to exit the editing mode. “Writing to Disc” appears

momentarily. It also appears when pressing [AOPEN/CLOSE] or [I/y ON/STANDBY] before exiting the editing

mode after editing.

Note

• If you delete the title in DVD+RW, deleted title will be displayed as “Empty”.

• You cannot overwrite on the “Empty”

• For DVD+RW, if “Empty” appears right next to the other “Empty”, those “Empty” combines into one.

Title List

+VR

JAN/21/09 7:00AM L1 SLP

EMPTY TITLE

7:00AM (2:00:00)

JAN/21/09

SLP

1Delete

the title

Empty

1 / 1

EN 67

E7PCAUD_DR420KU_EN.indd 67

2/6/2009 10:55:47 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DELETING TITLES

In stop mode, press [TOP MENU].

Title list, original or playlist will appear.

You can delete titles which you do not need anymore.

Please be advised that the titles once deleted cannot be

brought back to the disc.

Be sure to read “Notes for deleting titles” on page 67

before you delete the title.

• For VR mode DVD-RW, press [MENU/LIST] to

switch between “Original” and “Playlist”.

Use [K / L/s / B] to select a desired

title, then press [ENTER].

e.g.) VR mode DVD-RW original

Title List

ORG

OPEN/

INPUT

JAN/ 1/09 1:00AM L1 LP

CLOSE SELECT

HDMI

1:00AM (2:00:00)

JAN/ 1/09

L1 LP

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

SATELLITE

LINK

PQRS

TUV

1 / 2

TIMER

PROG.

SPACE

Use [K / L] to select “Title Delete”,

then press [ENTER].

SETUP DISPLAY AUDIO

MENU/LIST

Play From Start

Edit

Title Delete

Add To Playlist

TOP MENU

ENTER

CLEAR

RETURN

Use [K / L] to select “Yes”, then press

[ENTER].

SKIP

REV

FWD

SKIP

Delete this title?

PAUSE

PLAY

STOP

Yes

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

After that, “Are you sure?” will appear, select

“Yes” and then press [ENTER].

REPEAT REC MODE REC

ZOOM

Title will be deleted.

Press [RETURN] or [STOP C] to exit.

Data will be written onto the disc momentarily.

SE-R0265

Writing to Disc

90%

This operation may take

awhile to be completed.

68 EN

E7PCAUD_DR420KU_EN.indd 68

2/6/2009 10:55:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CREATING/DELETING PLAYLIST

Adding Titles to a Playlist

Follow the step 1 in “DELETING

TITLES” on page 68 to display the

original.

Playlist

For VR mode DVD-RW, you can create the playlist as you

wish.

You can add up to 99 titles to a playlist (as long as

the total number of the playlist does not exceed 999

chapters).

Use [K / L/s / B] to select the

desired title, then press [ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select “Add To

Playlist”, then press [ENTER].

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Play From Start

Edit

Title Delete

Add To Playlist

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

Use [K / L] to select “Yes”, then press

SETUP DISPLAY AUDIO

MENU/LIST

[ENTER].

Create a Playlist ?

TOP MENU

Yes

ENTER

The title is added to playlist.

CLEAR

RETURN

Press [RETURN] or [STOP C] to exit.

Data will be written onto the disc momentarily.

SKIP

REV

FWD

SKIP

This operation may take

awhile to be completed.

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

SE-R0265

Note

• When a playlist contains 99 titles or more, or 999

chapters or more, “Add to Playlist” cannot be

selected.

EN 69

E7PCAUD_DR420KU_EN.indd 69

2/6/2009 10:55:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CREATING/DELETING PLAYLIST

Erasing All Playlist

Press [SETUP].

Main menu will appear.

Playlist

A playlist can be deleted if it is no longer needed.

Use [K / L] to select “DVD Menu”,

then press [ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Use [K / L] to select “Delete All

Playlists”, then press [ENTER].

DVD Menu

SATELLITE

LINK

PQRS

TUV

Format

Finalize

Disc Protect OFF

TIMER

PROG.

SPACE

Delete All Playlists

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Use [K / L] to select “Yes”, then press

ENTER

[ENTER].

CLEAR

RETURN

Delete entire playlist?

SKIP

REV

FWD

SKIP

Yes

PAUSE

PLAY

STOP

“Are you sure?” will appear.

Use [K / L] to select “Yes” and then press

[ENTER].

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

DVD Menu

Format

Finalize

Disc Protect OFF

Delete All Playlist

DeleAtereenyotiurespulraey?list?

Yes

SE-R0265

Playlist is deleted.

Data will be written onto the disc momentarily.

This operation may take

awhile to be completed.

Note

• Deleting a playlist will not increase the available

recording time on the disc.

70 EN

E7PCAUD_DR420KU_EN.indd 70

2/6/2009 10:55:48 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Putting Names on Titles

You can put a name on the title and change it from this

menu.

Use [K / L] to select “Edit Title

Name”, then press [ENTER].

Edit

ORG

Scene Delete

OPEN/

INPUT

CLOSE SELECT

HDMI

Edit Title Name

Chapter Mark

Protect

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

To enter a title name, follow the

steps of “Guide to Edit Title Name”

on page 72.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

Edit - Edit Title Name

ORG

TOP MENU

character set

ENTER

CLEAR

RETURN

SKIP

REV

FWD

SKIP

1 : 25 : 47

area for entering title names

PAUSE

PLAY

STOP

When you finish entering a title name, press

[ENTER].

In stop mode, press [TOP MENU].

Use [K / L] to select “Yes”, then press

[ENTER].

Title list, original or playlist will appear.

• For VR mode DVD-RW, press [MENU/LIST] to

switch between “Original” and “Playlist”.

Edit - Edit Title Name

ORG

Yes

Use [K / L/s / B] to select a desired

title, then press [ENTER].

e.g.) VR mode DVD-RW original

Title List

ORG

MY FAVORITE

JAN/ 1/09 1:00AM L1 LP

1:00AM (2:00:00)

JAN/ 1/09

L1 LP

1 : 25 : 47

The name you entered will be activated for the title.

Press [RETURN] and then [RETURN] or

[STOP C] to exit.

Data will be written onto the disc momentarily.

1 / 2

This operation may take

awhile to be completed.

Use [K / L] to select “Edit”, then press

[ENTER].

Play From Start

Edit

Title Delete

Add To Playlist

EN 71

E7PCAUD_DR420KU_EN.indd 71

2/6/2009 10:55:49 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Putting Names on Titles (cont’d)

Guide to Edit Title Name

1)Use [K / L] to select a desired character set, then

press [ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

2)Follow the list below, use [the Number buttons]

repeatedly until the desired letter appears.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Select

ABC

abc

123

@ ! ?

Press

<space>

SATELLITE

LINK

PQRS

TUV

! ”# $ % & ’( )

+ , - . / : ; < = >

? @ [ ] ^ _ { | }

(*1)

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

ABC

DEF

abc

def

TOP MENU

GHI

ghi

ENTER

JKL

jkl

CLEAR

RETURN

MNO

PQRS

TUV

WXYZ

mno

pqrs

tuv

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

wxyz

REPEAT REC MODE REC

ZOOM

*1 Press

, character set will be changed to the “ @!? ”

to to go back to

mode automatically. Press

the previous character set.

• To delete letters, press [CLEAR] repeatedly.

Press and hold [CLEAR] to delete all letters.

• Use [s / B] to move the cursor to the left and right.

• You can enter up to 30 letters.

SE-R0265

Note

• Undefined letters in a title name are shown by “*”. If

you delete them, adjoining letters may change to “*”

or other.

72 EN

E7PCAUD_DR420KU_EN.indd 72

2/6/2009 10:55:49 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Setting Chapter Marks

Follow steps 1 to 3 in “Putting Names

on Titles” on page 71 to display “Edit”

menu.

You can put chapter marks in each title. Once a chapter is

marked, you can use it for the chapter search feature.

Use [K / L] to select “Chapter Mark”,

then press [ENTER].

Submenu will appear.

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Use [SKIP H / G],

[REV E], [FWD D], [PLAY B] and

[PAUSE F] to find the point where

you will create a new chapter mark.

Or, use [SKIP H / G] to find a

chapter mark that you wish to delete.

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

Use [K / L] to select “Add” or

“Delete”, then press [ENTER].

e.g.) VR mode DVD-RW original

TOP MENU

Edit - Chapter Mark

ORG

ENTER

Add

Delete

CLEAR

RETURN

Chapter

2 / 3

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Use [K / L] to select “Yes”, then press

REPEAT REC MODE REC

ZOOM

[ENTER].

If you select “Add” at step 4, a new chapter mark

will be added, and if you select “Delete” at step

4, the chapter mark will be deleted.

e.g.) Add

SE-R0265

Edit - Chapter Mark - Add

ORG

Yes

Chapter

2 / 3

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

A new chapter mark will be added.

Press [RETURN].

Note

• Maximum numbers of chapter for each DVD:

VR mode DVD : 999 chapters per entire original

and playlist

+VR mode DVD : 254 chapters per disc, 99 chapters

per title

• Besides the above-mentioned, it is not likely to be

able to add according to recorded time and number

of chapters.

Press [RETURN] again and then

[RETURN] or [STOP C] to exit.

Data will be written onto the disc momentarily.

This operation may take

awhile to be completed.

EN 73

E7PCAUD_DR420KU_EN.indd 73

2/6/2009 10:55:50 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Hiding Chapters

Use [K / L/s / B] to select a desired

title, then press [ENTER].

You can hide chapters from the title list.

Hidden chapters are skipped during playback.

Title List

+VR

JAN/15/09 1:00AM L1 LP

1:00AM (2:00:00)

JAN/15/09

L1 LP

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

1 / 2

SATELLITE

LINK

PQRS

TUV

Use [K / L] to select “Edit”, then

press [ENTER].

TIMER

PROG.

SPACE

Play From Start

Edit

Title Delete

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Use [K / L] to select “Hide Chapter”,

then press [ENTER].

Submenu will appear.

ENTER

CLEAR

RETURN

SKIP

REV

FWD

SKIP

Use [SKIP H] or [SKIP G] to decide

the chapter to be hidden.

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Use [K / L] to select “Hidden”, then

press [ENTER].

REPEAT REC MODE REC

ZOOM

Edit - Hide Chapter

+VR

Visible

Hidden

Chapter 2 / 3 Hidden

JAN/15/09 1:00AM L1 LP

1 : 25 : 47

In stop mode, press [TOP MENU].

Title list will appear.

After this operation is completed,

press [RETURN] thrice to exit.

Data will be written onto the disc momentarily.

Note

• ”Hidden” will be displayed in the preview window

while previewing the hidden chapter.

This operation may take

awhile to be completed.

• When you make all chapters in the title “Hidden”,

“Hidden” is displayed in a thumbnail of the title list.

Title List

+VR

If you want hidden chapters to be “Visible”,

select the chapter to be shown. Then use

[K / L] to select “Visible”, then press [ENTER]

at the step 6 above.

JAN/15/09 1:00AM L1 LP

--:-- (2:00:00)

Hidden

---/--/--

Data will be written onto the disc momentarily.

Empty

1 / 1

74 EN

E7PCAUD_DR420KU_EN.indd 74

2/6/2009 10:55:51 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Deleting a Part of a Title

You can delete a specific part of a title.

Even when parts of title are deleted from the playlist, the

original title will remain as it is.

Follow the steps 1 to 3 in “Putting

Names on Titles” on page 71 to

display “Edit” menu.

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select “Scene Delete”,

then press [ENTER].

e.g.) VR mode DVD-RW playlist.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Edit

Scene Delete

SATELLITE

LINK

Edit Title Name

Chapter Mark

Title Dividing

Title Combining

PQRS

TUV

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

TOP MENU

Instructions continue on the next page.

ENTER

CLEAR

RETURN

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

SE-R0265

Note

• When a scene is deleted from an original, the playlist

related to the original will be deleted.

• You cannot select “Scene Delete” if the number of

chapter marks in the original or playlist is more than

999. (Depends on the content, there is a case that

you cannot select “Scene Delete” before the number

of chapter marks reaches 999.)

• The recordable disc space will not increase even after

deleting a part of a title on the playlist.

EN 75

E7PCAUD_DR420KU_EN.indd 75

2/6/2009 10:55:53 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Deleting a Part of a Title (cont’d)

Use [K / L] to select “Delete” then

press [ENTER].

Use [SKIP H / G],

[REV E], [FWD D], [PLAY B] and

[PAUSE F] to find the start point,

then press [ENTER].

Edit - Scene Delete

Start

End

Preview

Delete

Edit - Scene Delete

Start

End

Preview

Delete

JAN/ 1/09 1:00AM L1 LP

1 : 47 : 00

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

Use [K / L] to select “Yes” then press

[ENTER].

Then use [SKIP H / G],

“Are you sure?” will appear. Select “Yes” using

[K / L] and then press [ENTER].

[REV E], [FWD D], [PLAY B] and

[PAUSE F] again to move to the end

point, and press [ENTER].

Edit - Scene Delete

Are you sure?

Yes

Edit - Scene Delete

Start

End

Preview

Delete

JAN/ 1/09 1:00AM L1 LP

1 : 50 : 00

The part of the title is deleted.

JAN/ 1/09 1:00AM L1 LP

1 : 45 : 00

Press [RETURN] and then [RETURN] or

[STOP C] to exit.

Data will be written onto the disc momentarily.

The cursor will move to “Preview”.

The bar at the bottom of the screen indicates the

total and the elapsed time of the title, and the

area selected for deletion is indicated in red.

You can check the preview by pressing [ENTER].

• Before and after 5 seconds of the deleted point

will be playback for preview.

This operation may take

awhile to be completed.

start point end point

Before

editing

Edited

76 EN

E7PCAUD_DR420KU_EN.indd 76

2/6/2009 10:55:55 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Dividing a Title

Playlist

Use [K / L] to select “Edit”, then

press [ENTER].

e.g.) VR mode DVD-RW playlist

You can divide one title into two new titles.

Play From Start

Edit

Title Delete

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Use [SKIP H], [SKIP G], [REV E],

[FWD D], [PAUSE F] and [PLAY B]

to decide the point at which you will

divide the title.

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

Use [K / L] to select “Title Dividing”,

then press [ENTER].

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Use [K / L] to select “Yes”, then press

[ENTER].

e.g.) VR mode DVD-RW playlist

ENTER

CLEAR

RETURN

Edit - Title Dividing

SKIP

REV

FWD

SKIP

Yes

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

REPEAT REC MODE REC

ZOOM

The title will be divided into two new titles.

Both title names are identical.

For DVD+RW: Data will be written onto the disc

momentarily.

Writing to Disc

90%

This operation may take

awhile to be completed.

In stop mode, press [TOP MENU].

• For VR mode DVD-RW, press [MENU/LIST] to

select “Playlist”.

For VR mode DVD-RW: Proceed to step 7.

Press [RETURN] or [STOP C] to exit.

Use [K / L/s / B] to select a desired

title, then press [ENTER].

Data will be written onto the disc momentarily.

This operation may take

awhile to be completed.

Note

• You cannot divide a title of the disc when the

number of recording titles reaches the maximum of

99 (-RW) or 49 (+RW), and the number of recording

chapters reaches the maximum of 999 (-RW) or 254

(+RW).

EN 77

E7PCAUD_DR420KU_EN.indd 77

2/6/2009 10:55:56 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Combining Titles

Follow the steps 1 to 3 in “Dividing a

Playlist

Title” on page 77 to display “Edit”

menu.

You can combine two titles into a single title.

Use [K / L] to select “Title

Combining”, then press [ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

Edit

Scene Delete

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Edit Title Name

Chapter Mark

Title Dividing

Title Combining

SATELLITE

LINK

PQRS

TUV

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

TIMER

PROG.

SPACE

Title combining setting window will appear.

Selected title grays out, and the frame of the

next title becomes yellow.

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Edit - Title Combining

JAN/31/09 11:00PM L1 LP

11:00PM (0:30:00) JAN/31/09

L1 LP

ENTER

1 +

CLEAR

RETURN

SKIP

REV

FWD

SKIP

1 / 6

PAUSE

PLAY

STOP

Use [K / L / { / B] to select another

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

title to combine, then press [ENTER].

Selection menu will appear.

REPEAT REC MODE REC

ZOOM

Use [K / L] to select “Yes”, then press

[ENTER].

Combine selected titles?

Yes

SE-R0265

The two titles will combine into a single title.

Title List

JAN/ 1/09 12:00AM L1 LP

12:00AM (2:30:00) JAN/ 1/09

L1 LP

1 / 6

Press [RETURN] or [STOP C] to exit.

Data will be written onto the disc momentarily.

This operation may take

awhile to be completed.

Note

• You cannot select the same title twice and combine

it into a single title.

• If either one of the two original titles is deleted, the

combined new title is also deleted.

78 EN

E7PCAUD_DR420KU_EN.indd 78

2/6/2009 10:55:57 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Setting or Releasing the Title Protection

Follow the steps 1 to 3 in “Putting

Names on Titles” on page 71 to

display “Edit” menu.

Original

To prevent the accidental editing, or erasing of the titles,

you can protect them in “Edit” menu.

You can cancel the title protection feature after it is

applied.

Use [K / L] to select “Protect”, then

press [ENTER].

Edit

ORG

OPEN/

INPUT

Scene Delete

CLOSE SELECT

HDMI

Edit Title Name

Chapter Mark

Protect

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

SATELLITE

LINK

PQRS

TUV

• If the title is protected,

the original list.

icon will appear in

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

Confirm the indication

“OFF ON”. Press [ENTER] again.

• If the title is already protected, “ON OFF” will

appear. If you press [ENTER], the title will be

released from protection.

TOP MENU

ENTER

Edit - Protect

ORG

CLEAR

RETURN

OFF

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

JAN/ 1/09 1:00AM L1 LP

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

1 : 25 : 47

•

icon will appear on the title in the original

REPEAT REC MODE REC

ZOOM

list.

Press [RETURN] and then [RETURN] or

[STOP C] to exit.

Data will be written onto the disc momentarily.

SE-R0265

This operation may take

awhile to be completed.

To protect a whole disc

(VR mode DVD-RW, DVD+RW/+R

only):

Select “Disc Protect OFF ON” from the DVD

Menu, then select “Yes”.

Refer to “SETTING A DISC TO PROTECT” on

page 29.

EN 79

E7PCAUD_DR420KU_EN.indd 79

2/6/2009 10:55:58 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING DISCS

Setting or Clearing All Chapter Marks at Once

Follow the steps 1 to 3 in “Putting

Names on Titles” on page 71 to

display “Edit” menu.

For titles in video mode DVD-RW, you can set or edit

chapter at every time interval. You can clear the chapter

mark too.

You can specify the interval of chapter marks for titles last

more than 5 minutes.

Use [K / L] to select “Chapter Mark”,

then press [ENTER].

Edit

Video

OPEN/

INPUT

CLOSE SELECT

HDMI

Edit Title Name

Chapter Mark

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

SPACE

Use [K / L] to select the desired

interval, then press [ENTER].

SETUP DISPLAY AUDIO

MENU/LIST

Edit - Chapter Mark

Video

TOP MENU

OFF

5 minutes

10 minutes

15 minutes

30 minutes

60 minutes

ENTER

CLEAR

RETURN

JAN/ 1/09 1:00AM L1 LP

1 : 25 : 47

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

Use [K / L] to select “Yes”, then press

[ENTER].

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Chapter marks are added.

If you select “OFF” at step 3, all the chapter

marks are erased.

REPEAT REC MODE REC

ZOOM

Press [RETURN] and then [RETURN] or

[STOP C] to exit.

Data will be written onto the disc momentarily.

SE-R0265

This operation may take

awhile to be completed.

Note

• You cannot select a chapter mark interval that

exceeds the length of a title.

• The length of chapters may slightly deviate from the

one specified at the step 3.

• A chapter mark may be delayed depending on the

recording content.

• Maximum number of chapter for video mode DVD is

99 chapters per title.

• The interval for auto chapter may be up to two

minutes different from the time option you set.

80 EN

E7PCAUD_DR420KU_EN.indd 80

2/6/2009 10:55:58 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

LIST OF THE DEFAULT SETTINGS

The following table is the contents which you can set and the default settings.

Refer to the following table for useful operation.

Setup

Playback

Items (highlight is the default)

Parental Lock

→ page 84

Contents

Set the parental level for DVD playback.

OFF

level 8 [Adult] to

1 [Kid Safe]

Audio Out Dynamic Range Control

→ page 85

Compressing the range of sound volume.

OFF

PCM

Set whether the sound recorded in 96kHz will be

down sampled to 48kHz.

48kHz

96kHz

PCM

Dolby Digital

DTS

Set the type of sound signal which outputs from

the digital audio output jack.

Stream

Set whether DTS signal is output or not.

OFF

Disc Menu Language

→ page 86

Set the language for disc menu language.

English

French

Spanish

Other

Audio Language

→ page 86

Set the language for audio.

Original

English

French

Spanish

Other

Subtitle Language

→ page 86

Set the language for subtitles.

OFF

English

French

Spanish

Other

Angle Icon

Set whether to display the angle icon or not.

Set the type of still image in pausing playback.

OFF

→ page 86

Still Mode

→ page 86

Auto

Field

Frame

Display

OSD Language

Set the language for OSD (on-screen display).

Set the idling time before the screen saver starts.

English

Français

Español

OFF

1 minute

5 minutes

→ page 87

Screen Saver

→ page 87

10minutes

15 minutes

Auto

FL Dimmer

→ page 87

Set the brightness of the front panel display.

Bright

Dark

V-Chip

MPAA Rating

→ page 88

Set the viewing limitation according to US movie

ratings.

NC-17

PG-13

TV Rating

→ page 88

TV-MA

TV-14

TV-PG

TV-G

Set the viewing limitation according to US TV

program ratings.

TV-Y7

TV-Y

None

Canadian English Rating 18+

Set the viewing limitation according to Canadian

English language ratings.

→ page 88

14+

C8+

EN 81

E7PCAUD_DR420KU_EN.indd 81

2/6/2009 10:55:59 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

LIST OF THE DEFAULT SETTINGS

Setup

Display

Items (highlight is the default)

V-Chip

Contents

Canadian French Rating 18ans+

Set the viewing limitation according to Canadian

French language ratings.

→ page 89

16ans+

13ans+

8ans+

Change Password

→ page 89

Change the password.

Video

Progressive

→ page 90

OFF

Set to the progressive scan mode (set to "ON") or

to the interlace scan mode (set to "OFF").

TV Aspect

→ page 90

4:3 Letter Box

4:3 Pan & Scan

Set a picture size according to aspect ratio of your

TV.

16:9 Wide

Select Video L1(Rear)

Set the video input type for the external input.

Insert chapter marks at even time interval.

Video In

S-Video In

→ page 26

L2(Front)

Video In

S-Video In

OFF

5 minutes

Recording

Auto Chapter

→ page 34

10minutes

15 minutes

30 minutes

60 minutes

Recording Audio Select (XP)

→ page 35

PCM

Dolby Digital

Set the recording audio type. (Only when the rec

mode is set to XP.)

Auto

Finalize

→ page 30

Disc Full

OFF

Set the unit to finalize the disc automatically.

End of Timer Rec

OFF

Aspect Ratio (Video mode)

→ page 35

Auto

4:3

16:9

Set a aspect ratio for video mode recording.

Make Recording Compatible

→ page 34

OFF

Set to prohibit additional recording (OFF) or to

replace the title list after recording (ON).

Clock

HDMI

Set the clock.

Set the color space for the HDMI output.

Clock Setting → page 25

Format

→ page 91

RGB

YCbCr

HDMI Audio

→ page 92

Set whether to output the HDMI audio signal or

not.

OFF

RGB Range

→ page 92

Set the black-white contrast level for HDMI RGB

output.

Normal

Enhanced

HDMI CEC

→ page 92

OFF

Set whether to utilize the HDMI-CEC function. The

HDMI-CEC function allows all components

connected via HDMI cable to act in conjunction

with this unit.

Reset All

→ page 93

Yes

Set to the default setting.

Note

• Your change to each setting stays on even when the power is off.

• An item which is not currently available is grayed in the settings.

82 EN

E7PCAUD_DR420KU_EN.indd 82

2/6/2009 10:55:59 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Playback

Press [STOP C] if you are playing back a disc.

Press [SETUP] and use [K / L] to

select “General Setting“, then press

[ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

Use [K / L] to select “Playback”, then

press [ENTER].

SATELLITE

LINK

PQRS

TUV

General Setting

TIMER

PROG.

Playback

Display

Video

Recording

Clock

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

HDMI

Reset All

TOP MENU

ENTER

CLEAR

RETURN

Use [K / L] to select a desired item,

then press [ENTER].

SKIP

REV

FWD

SKIP

Parental Lock

Audio Out

PAUSE

PLAY

STOP

Disc Menu Language

Audio Language

Subtitle Language

Angle Icon

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Still Mode

REPEAT REC MODE REC

ZOOM

Submenu will appear.

Refer

set the selected item.

on pages 84 to 86 and

SE-R0265

When you finish with the setting,

press [SETUP] to exit.

EN 83

E7PCAUD_DR420KU_EN.indd 83

2/6/2009 10:56:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Playback (cont’d)

Parental Lock (Default: OFF)

A password has not been set yet.

Some DVD-video feature a parental lock level. Playback

will stop if the ratings exceed the levels you set, it will

require you to enter a password before the disc will

playback. This feature prevents your children from

viewing inappropriate material.

Use [K / L] to select the desired level, then press

[ENTER].

Use [K / L] to select “Yes”, then press [ENTER]. Use

[the Number buttons] to enter a new password except

for 4737, then press [ENTER].

Change Password?

Password Input

Yes

Your setting will be activated.

A password has been set already.

Parental Lock

OFF

8 [Adult]

7 [NC 17]

6 [R]

• Use [the Number buttons] to enter the current

password.

5 [PG R]

4 [PG 13]

3 [PG]

Password Input

2 [G]

1 [Kid Safe]

Your setting will be activated.

• If you want to change password, use [K / L] to select

“Yes” then press [ENTER]. Use [the Number buttons]

to enter a new password except for 4737, then press

[ENTER].

If a password has not been set yet, proceed to

If a password has been set already, proceed to

RATING EXPLANATIONS

• OFF : Parental Control is inactive; all discs can play.

• 8 [Adult]: DVD software of any grades (adult/general/

children) can be played back.

• 7 [NC 17]: No one under 17 admitted.

Change Password?

Password Input

Yes

Your setting will be activated.

• 6 [R]: Restricted; under 17 requires accompanying

parent or adult guardian.

• 5 [PG R]: Parental Guidance Recommended.

• 4 [PG13]: Unsuitable for children under 13.

• 3 [PG]: Parental Guidance suggested.

• 2 [G]: General Audience.

Note

• Press [CLEAR] to erase numbers entered incorrectly.

• When you forget the password or you want to clear

all settings in “Parental Lock” menu, enter 4737 using

[the Number buttons] in password input window.

Password will be cleared and parental levels will be

set to “OFF”.

• 1 [Kid Safe]: Suitable for children.

Note

• Parental lock function may not be available to some

discs.

• With some DVD, it may be difficult to find if they are

compatible with parental lock. Be sure to check if the

parental lock function operates in the way that you

have set.

• Record the password in case you forget it.

• If there is a DVD in the unit when you set up the

parental lock, press [OPEN/CLOSE A] to activate the

parental lock level.

84 EN

E7PCAUD_DR420KU_EN.indd 84

2/6/2009 10:56:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Playback (cont’d)

Audio Out

Settings for Dolby Digital (Default : Stream)

Choose the appropriate audio setting for your external device.

Use [K / L] to select a setting, then press [ENTER].

It will only affect a disc playback.

Dolby Digital

Use [K

L] to select a desired item, then press [ENTER].

PCM

Stream

Audio Out

Your setting will be activated.

Dynamic Range Control

PCM

Dolby Digital

DTS

PCM

: Converts the Dolby Digital into PCM (2 channel).

When your amplifier/decoder is NOT

compatible with Dolby Digital, set to “PCM”.

Stream : Outputs Dolby Digital signals.

Dynamic Range Control (Default : ON)

When your amplifier/decoder is compatible

with Dolby Digital, set to “Stream”.

Set to “ON” to compress the range between soft and loud sounds.

Use [K / L] to select a setting, then press [ENTER].

Settings for DTS (Default : ON)

Dynamic Range Control

Select a setting using [K / L], then press [ENTER].

OFF

DTS

OFF

Your setting will be activated.

Note

Your setting is activated.

• Dynamic range control function is available only on

the discs which are recorded in the Dolby Digital

format.

: Outputs DTS signals.

If your amplifier / decoder is compatible with

DTS, set to “ON”.

OFF

: No DTS signal is output.

If your amplifier / decoder is NOT compatible

with DTS, set to “OFF”.

Settings for PCM (Default : 48kHz)

Use [K / L] to select a setting, then press [ENTER].

PCM

48kHz

96kHz

Your setting will be activated.

48kHz : If your amplifier/decoder is NOT compatible

with 96kHz PCM, select “48kHz”. 96kHz sound

will be output in 48kHz.

96kHz : If your amplifier/decoder is compatible with

96kHz PCM, select “96kHz”. 96kHz sound will

be output.

Note

When playing back disc with copyright protection

• Even if you select “96kHz”, the sound will be down

sampled at 48kHz.

EN 85

E7PCAUD_DR420KU_EN.indd 85

2/6/2009 10:56:00 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Playback (cont’d)

Disc Menu Language (Default : English)

Angle Icon (Default : ON)

Set the language for disc menu.

Set to “ON” to show the angle icon during the playback.

Use [K / L] to select a language, then press [ENTER].

Use [K / L] to select a setting, then press [ENTER].

Disc Menu Language

Angle Icon

English

French

Spanish

Other

OFF

Your setting will be activated.

Still Mode (Default : Auto)

Audio Language (Default : Original)

Select “Auto” usually.

Use [K / L] to select a setting, then press [ENTER].

Set the audio language.

Use [K / L] to select a language, then press [ENTER].

Still Mode

Auto

Audio Language

Field

Frame

Original

English

French

Spanish

Other

Your setting will be activated.

Auto

: Optimum resolution setting (“Field” or

“Frame”) will be selected.

Your setting will be activated.

• When “Original” is selected, the audio language will be

in the disc’s default language.

Field

: Images in the still mode will be stabilized.

Frame : Images in the still mode will be highly defined.

Note

Subtitle Language (Default : OFF)

•

Frame is one completed video image made up of two

fields (There are 30 frames per second of NTSC video).

Set the subtitle language.

Use [K / L] to select a language, then press [ENTER].

Subtitle Language

OFF

English

French

Spanish

Other

Your setting will be activated.

If “Other” is selected for

using [the Number buttons].

, press 4-digit code

Code Input

• When you finish entering the code, press [ENTER].

Refer to the language code table on page 98.

Note

• Only the languages supported by the disc can be

selected.

• Audio language setting may not be available to

some discs.

• You can also change or switch off the subtitles on a

DVD from the disc menu if it is available.

• Press [CLEAR] to erase numbers entered incorrectly.

86 EN

E7PCAUD_DR420KU_EN.indd 86

2/6/2009 10:56:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Display

OSD Language (Default : English)

Set the language for the on-screen display.

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select a language, then press [ENTER].

OSD Language

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

English

Français

Español

SATELLITE

LINK

PQRS

TUV

Your setting will be activated.

TIMER

PROG.

SPACE

Screen Saver (Default : 10 minutes)

SETUP DISPLAY AUDIO

MENU/LIST

Set the time to activate the screen saver function on the

TV screen.

TOP MENU

Use [K / L] to select a setting, then press [ENTER].

Screen Saver

OFF

ENTER

1 minute

5 minutes

10 minutes

15 minutes

CLEAR

RETURN

SKIP

REV

FWD

SKIP

Your setting will be activated.

PAUSE

PLAY

STOP

FL Dimmer (Default: Bright)

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

Set the front panel display brightness.

Use [K / L] to select a setting, then press [ENTER].

REPEAT REC MODE REC

ZOOM

FL Dimmer

Auto

Bright

Dark

You can choose one from “Auto”, “Bright” or “Dark”.

SE-R0265

If “Auto” is selected, the display gets dark when the

power is off.

Press [STOP C] if you are playing back a disc.

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[ENTER].

Use [K / L] to select “Display”, then

press [ENTER].

Use [K / L] to select a desired item,

then press [ENTER].

OSD Language

Screen Saver

FL Dimmer

V-Chip

Submenu will appear.

Press [SETUP] to exit.

EN 87

E7PCAUD_DR420KU_EN.indd 87

2/6/2009 10:56:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Display (cont’d)

V-Chip

MPAA Rating

With the V-chip system in this unit, you can set the

viewing limitation for the analog TV programs received

from the external tuner or recorded on DVDs to prevent

your children from watching inappropriate programs. If

the unit detects a blocked program, a restriction message

appears and you are not allowed to view the program.

TV Rating

Canadian English Rating

Canadian French Rating

You can set the viewing limitation according to

MPAA rating (US movie ratings),

1) Use [the Number buttons] to enter the access

password.

If you have not set the password, first, use [the

Number buttons] to set the access password, then

press [ENTER]. The number you entered will be stored

as the access password.

TV Rating (US TV program ratings),

Canadian English Rating (Canadian English language ratings)

Canadian French Rating (Canadian French language ratings)

1) Use [K / L] to select the desired rating, then press

[ENTER] repeatedly to switch between view and

block. When it is blocked a key icon will appear.

Password Input

e.g.) MPAA rating

MPAA Rating

2) Use [K / L] to select a desired item, then press

[ENTER].

NC-17

V-Chip

PG-13

MPAA Rating

TV Rating

Canadian English Rating

Canadian French Rating

Change Password

[MPAA Rating]

Rating

Category

Mature audience only

higher

NC-17

No one under 17 admitted

Restricted; under 17 requires

accompanying parent or adult guardian

PG-13

Unsuitable for children under 13

Parental guidance suggested

General audience

lower

No rating

[TV Rating]

Rating

TV-MA

TV-14

TV-PG

TV-G

Category

Mature audience only

higher

Unsuitable for children under 14

Parental guidance suggested

General audience

TV-Y7

TV-Y

Appropriate for all children 7 and older

Appropriate for all children

No rating

lower

None

[Canadian English Rating]

Rating

Category

18+

14+

Adult audience only

higher

Unsuitable for ages under 14

Parental guidance suggested

General audience

C8+

For children over 8

For all children

lower

Exempt program

88 EN

E7PCAUD_DR420KU_EN.indd 88

2/6/2009 10:56:01 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Display (cont’d)

[Canadian French Rating]

Change Password

Rating

Category

Change the current password.

Use [the Number Buttons] to enter new access

password.

18ans+

16ans+

13ans+

8ans+

Adult audience only

higher

lower

Unsuitable for ages under 16

Unsuitable for ages under 13

Unsuitable for ages under 8

General audience

Note

• Press [CLEAR] to erase numbers entered incorrectly.

• When you forgot the access password, enter 4737

using [the Number buttons] in password input

window. Password will be cleared.

Exempt program

As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you

can further set the sub ratings to block specific

elements of programming. Press [K / L/ { / B] to select

the desired rating or sub rating, then press [ENTER]

repeatedly to switch between view and block. Sub

rating status will appear on the side of the main rating.

TV Rating

TV-MA

TV-14

TV-PG

TV-G

TV-Y7

TV-Y

None

Sub Rating

Category

Fantasy Violence

Rating

TV-Y7

Violence

TV-PG

TV-14

TV-MA

Sexual Situation

Coarse Language

Suggestive Dialogue

TV-PG, TV-14

Note

• Changing the main rating to block or view

automatically changes all its sub ratings to the same

(block or view).

EN 89

E7PCAUD_DR420KU_EN.indd 89

2/6/2009 10:56:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Video

Progressive (Default : OFF)

This unit is compatible with the progressive scan system.

The feature provides you with the higher definition

images than the traditional output system does. To utilize

this feature, you must set progressive scan mode to “ON”.

OPEN/

INPUT

CLOSE SELECT

HDMI

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

1) Use [K / L] to select “ON“, then press [ENTER].

Progressive

SATELLITE

LINK

PQRS

TUV

OFF

TIMER

PROG.

SPACE

2) Use [{ / B] to select “Yes“, then press [ENTER].

Activating progressive scan:

Check your TV has progressive scan

and connect with component video cable.

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

NOTE :

If there is no picture or picture is

distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate?

Yes

ENTER

CLEAR

RETURN

3) Use [K / L] to select “Yes“ within 15 seconds, then

press [ENTER].

Your setting will be activated.

SKIP

REV

FWD

SKIP

Note

PAUSE

PLAY

STOP

• If your TV is compatible with progressive scan (480p), you

are recommended to use the HDMI or component video

cable (commercially available) to connect this unit to the

TV. (Refer to pages 19-20.) If not, use the RCA video cable

and set the progressive scan to “OFF”.

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

• If the Progressive Scan image is distorted, you can

cancel Progressive Scan by pressing and holding

[SETUP] for more than 3 seconds during DVD

playback. The “Progressive” setting will be “OFF”.

Press [STOP C] if you are playing back a disc.

• When selecting “No” or not pressing any buttons on

the unit or remote control within 15 seconds at step 3,

progressive scan remains to be “OFF” (interlace scan).

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[ENTER].

TV Aspect (Default: 16:9 Wide)

Use [K / L] to select “Video”, then

press [ENTER].

You can select the TV aspect ratio to match the formats of

what you are playing back with the unit and your TV

screen (4:3 standard or 16:9 widescreen TV).

Use [K / L] to select a desired option, then press [ENTER].

Use [K / L] to select a desired item,

then press [ENTER].

TV Aspect

4:3 Letter Box

4:3 Pan & Scan

16:9 Wide

Progressive

TV Aspect

Select Video

If you have a standard TV:

Submenu will appear.

Select “4:3 Letter Box”, so that black bars appear on the

top and bottom of the TV screen when playing back a

wide-screen picture. Select “4:3 Pan & Scan” for a full

height picture with both sides trimmed when playing

back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

Refer

the selected item.

on this page and set

• For

, refer to “SETTINGS FOR THE VIDEO

INPUT“ on page 26.

When you finish with the setting,

press [SETUP] to exit.

90 EN

E7PCAUD_DR420KU_EN.indd 90

2/6/2009 10:56:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

HDMI

Press [SETUP] in stop mode and use

[K / L] to select “General Setting”,

then press [ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select “HDMI”, then

press [ENTER].

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

General Setting

Playback

Display

Video

Recording

Clock

SATELLITE

LINK

PQRS

TUV

TIMER

PROG.

HDMI

Reset All

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

• You cannot select HDMI when an HDMI cable is

not connected and the item is shown in grey

color.

ENTER

CLEAR

RETURN

Use [K / L] to select a desired item,

then press [ENTER].

SKIP

REV

FWD

SKIP

Format

PAUSE

PLAY

STOP

HDMI Audio

RGB Range

HDMI CEC

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

• You cannot select

HDMI cable is not connected (the items will be

shown in grey).

through

when an

When you finish with the setting,

press [SETUP] to exit.

SE-R0265

Format (Default : RGB)

You can select the color space for HDMI output.

Set the appropriate color space for your display device.

Use [K / L] to select a setting, then press [ENTER].

• When the connected device is not compatible with the

Y/Cb/Cr, HDMI signal is output as RGB regardless of the

setting.

Format

RGB

YCbCr

Your setting will be activated.

EN 91

E7PCAUD_DR420KU_EN.indd 91

2/6/2009 10:56:02 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

HDMI (cont’d)

Functions available for the HDMI-CEC

• One touch play

When the operations with following buttons of this

unit’s remote control are performed, the TV will

automatically turned on and switch to appropriate input

channel.

Buttons for one touch play:

[TIMER PROG.], [SETUP], [INPUT SELECT ],

[PLAY B], [TOP MENU], [MENU/LIST]

HDMI Audio (Default : ON)

If you do not want to output the audio through HDMI

(when you digitally output the audio through the

COAXIAL DIGITAL AUDIO OUT jack to your audio system,

etc.), you can set the HDMI audio output off.

Use [K / L] to select a setting, then press [ENTER].

• Set to “OFF” when the HDMI sound is not output.

HDMI Audio

• System information

Get & Set Menu Language: This unit recognizes the

OSD language set for the TV and automatically set the

same language as the player menu language (OSD

menu language) for this unit.

Power off: When you turn the TV off, this unit and all

equipment connected via HDMI will automatically turns

off except during recording on the unit.

Receiving operational signal from TV’s remote

control: You can operate this unit with TV’s remote

control. Check your TV owner’s manual for details.

OFF

Your setting will be activated.

RGB Range (Default : Normal)

You can adjust the RGB range to make the dark areas of

the HDMI images brighter.

Use [K / L] to select a setting, then press [ENTER].

• Select “Enhanced“ if the black-white contrast is not clear.

• This setting is effective only for HDMI RGB output.

Note

RGB Range

• This function may not work properly depending on the TV

you are connecting.

Normal

Enhanced

• The available operation may differ depends on the TV’s

remote control you use.

Your setting will be activated.

• Other components must be compatible with HDMI-CEC in

order to use this function.

HDMI CEC (Default : OFF)

You can control all HDMI-CEC compatible components

connected via HDMI cable by simple button operations of

remote control of this unit.

In order to enable the function you need to set “HDMI

CEC” to “ON”.

Use [K / L] to select a setting, then press [ENTER].

HDMI CEC

OFF

Your setting will be activated.

92 EN

E7PCAUD_DR420KU_EN.indd 92

2/6/2009 10:56:03 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL SETTING

Reset All

Reset the setting to default.

Press [SETUP] in stop mode and use

[K / L] to select “General Setting”,

then press [ENTER].

OPEN/

INPUT

CLOSE SELECT

HDMI

Use [K / L] to select “Reset All”, then

press [ENTER].

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

General Setting

Playback

Display

Video

Recording

Clock

SATELLITE

LINK

PQRS

TUV

HDMI

Reset All

TIMER

PROG.

SPACE

SETUP DISPLAY AUDIO

MENU/LIST

TOP MENU

Select “Yes” using [K / L] , then press

[ENTER].

ENTER

CLEAR

RETURN

Reset to factory default?

Yes

SKIP

REV

FWD

SKIP

PAUSE

PLAY

STOP

“Are you sure?” will appear. Select “Yes” using

[K / L] and then press [ENTER].

Your setting will be initialized.

TIME SLIP

1.3x / 0.8x PLAY INSTANT SKIP

REPEAT REC MODE REC

ZOOM

SE-R0265

Note

• The settings listed below will remain unchanged

even after resetting to the factory default.

- Clock setting

- OSD language setting

- Parental lock setting

- V-chip setting

- Timer programs

EN 93

E7PCAUD_DR420KU_EN.indd 93

2/6/2009 10:56:03 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.

Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.

Symptom

Remedy

Power

The power does not turn on.

• Check that the AC power cord is connected securely.

• Check the breaker (in case of power failure).

Picture

There is no picture.

• Re-connect the connecting cords securely.

• Check if the connecting cords are damaged.

• If the main menu appears on the TV screen, press [RETURN] to exit.

• Check the connection to your TV (pages 18-21).

• Check if the progressive scan mode is set correctly according to your TV

(page 90).

• Switch the input selector on your TV (such as to “L1”) so that the signal from

the unit appears on the TV screen.

Picture noise appears.

• Clean the disc with a cleaning cloth.

TV program pictures are

distorted.

• Check if all the connections are made correctly (page 18).

Playback picture is distorted.

• Keep the device which may cause electrical disturbances, such as a cellular

phone away.

Playback picture or TV program

from the device connected

through the unit is distorted.

• If the playback picture output from a DVD player, VCR or tuner goes through

the unit before reaching your TV, the copy-protection signal applied to some

programs could affect picture quality. Disconnect the playback device in

question and connect it directly to your TV.

Cannot record a TV program.

• This unit does not have a tuner to receive TV broadcasting.

• You must connect this unit to an external tuner to record TV programs

(page 18).

Sound

There is no sound.

• Clean the disc with a cleaning cloth.

• Re-connect all connections securely.

• Check if the connecting cord is damaged.

• Check the connections to the amplifier input.

• The input device setting on the amplifier is incorrect.

• The unit is in pause mode or in slow-motion playback mode.

• The unit is in fast forward or fast reverse mode.

• If the audio signal does not come through the DIGITAL AUDIO OUTPUT

(COAXIAL) jack, check the setting in “Audio Out” (page 85).

No DTS sound on digital output.

• Change the setting menu for DTS to ON.

No DTS sound from analog

output

• This unit has no analog sound output when playing back the selected DTS

sound mode.

Sound is noisy.

• Clean the disc with a cleaning cloth.

Remote control

The remote control does not

function.

• Batteries are weak.

• There are obstacles between the remote control and the unit.

• The remote control is far from the unit.

• There are no batteries in the remote control.

• Check if the unit is turned on.

• The remote control is not pointed at the infrared sensor window on the unit.

94 EN

E7PCAUD_DR420KU_EN.indd 94

2/6/2009 10:56:03 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Symptom

Remedy

Playback

The disc does not play back.

• No disc is inserted.

• A blank disc is inserted.

• The disc is upside down. Insert the disc with the labeled side facing up.

• The disc is not correctly inserted.

• The unit cannot play back certain discs (such as a CD-ROM) (page 10).

• The region code on the DVD-video does not match the unit (page 10).

• Moisture has condensed inside the unit. Remove the disc and leave the unit

turned on for about 2 hours until the moisture evaporates (page 4).

• If the disc was recorded on another recorder, the unit cannot play back the

disc if it was not finalized.

Playback image freezes for a

second.

• During the playback of 2 layered disc, picture may freeze for a moment when

the 1st layer switches to the 2nd layer. This is not a malfunction.

The disc does not start playback

from the beginning.

• Resume playback was activated (page 54). Press [STOP C] twice.

• You have inserted a disc whose title menu or DVD menu automatically

appears on the TV screen when it is first inserted.

The unit starts playing back the

disc automatically.

• The DVD-video features an auto playback function.

Some functions such as stop,

search, or slow-motion playback

cannot be performed.

• Depending on the disc, you may not be able to do some of the operations.

Refer to the instruction manual supplied with the disc.

The language for the sound track • The titles does not have the multilingual audio tracks.

cannot be changed.

• The DVD-video prohibits the changing of the language for the sound track.

The subtitle language cannot be

changed or turned off.

• Multilingual subtitle are not recorded on the DVD-video.

The angles cannot be changed.

• Multi-angles are not recorded on the DVD-video being played back.

• The angle-change operation is whenever possible as long as the disc contains

a multi-angle portion. Actual change will be performed when the portion has

come up.

• The DVD-video prohibits changing angles.

• Try changing the angle using the DVD-video’s menu.

Recording / Timer recording / Editing

External input position (L1/L2)

cannot be changed while

recording.

• This unit is designed so. This is not a malfunction.

Nothing was recorded even

though you set the timer setting

correctly.

• There was a power failure during recording.

• The unit’s internal clock stopped due to a power failure that lasted for more

than 30 seconds. Reset the clock (page 25).

• The program contains copy protection signals that restricts copying.

• The timer setting overlapped with another setting that has priority.

Recording does not stop

immediately after you press

[STOP C].

• It will take a few seconds for the unit to input disc data before recording

stops.

Timer recording is not complete

or did not start from the

beginning.

• The timer setting overlapped with another setting that has priority (page 41).

• Disc space was not enough.

• “Make Recording Compatible“ is not set to “ON”, when recording onto

DVD+RW/+R that was recorded on other unit.

EN 95

E7PCAUD_DR420KU_EN.indd 95

2/6/2009 10:56:03 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Symptom

Remedy

DV signal cannot be input.

• Before connection, turn on the power supplies for both this unit and the DVC,

and make sure that these units are in stop mode.

• Only a “DVC-SD” signal can be input from the DVC to this unit. Other types of

signals are not supported.

• Do not connect any device other than the DVC. Even if a recorder or PC with

another DV terminal is connected, the DV function will not operate.

• If the DVC is not recognized after connection, turn off the power supply for

the unit and re-connect the DVC.

The DVC cannot be operated

with this unit.

• Signal input or DVC operation from this unit may be disabled depending on

the type of DVC.

• If a DVC signal cannot be input, use an external input (L1 (Rear)/L2 (Front)) for

analog connection via audio/video cables.

• DVC control may be disabled depending on the type of DVC, even in a mode

other than camera mode. In this case, switch to DVD control and execute the

normal recording procedure while operating the DVC.

Certain functions of the unit

cannot operate.

• Some functions may not operate depending on the type of DVC. For

example, if the DVC does not support slow playback mode, the slow playback

function is disabled.

• With L3 (DV-IN), the disc display menu does not appear unless disc playback

is executed.

DV audio signal cannot be

switched.

• For recording with the DVC, the recording audio signal can be set to 12 bits

or 16 bits. However, when 16-bit recording mode is selected, audio signal

cannot be switched. To record an audio signal, set it to 12 bits.

HDMI

No image from HDMI connection. • Check the HDMI connection. (Check the status of the HDMI related

indications.)

• Check whether the connected monitor device or other device supports

HDCP. (This unit will not output a video signal unless the other device

supports HDCP.)

• Check the setting of HDMI.

• Check whether the output format of this unit (HDMI FORMAT) matches the

supported input format of other connected device.

• If the unit is connected to the unauthorized display device with an HDMI

cable, the audio/video signal may not be output when playing back a

commercial DVD-video.

There is no sound or the sound is • The HDMI sound is not output when “HDMI Audio” is set to “OFF”.

distorted.

• Check the RCA audio cable connection. If you are using HDMI-DVI conversion

cable, you must connect the RCA audio cable, too.

• Check whether the output format of this unit (HDMI FORMAT) matches the

supported input format of other connected device.

Others

The unit does not operate

properly.

• When static electricity, etc., causes the unit to operate abnormally, unplug

the unit and then plug it in again.

The disc tray does not open when • It may take a few seconds for the disc tray to open after you have recorded or

you press [OPEN/CLOSE A].

edited a disc. This is because the unit is adding disc data to the disc.

“Repairing” appears on the TV

screen.

• If there is a power failure or unplugging during recording, finalizing,

formatting or editing (even after “Repairing” disappears), a repairing process

will begin automatically just after turning the unit on again.

It may take several minutes up to about several hours.

Repairing

In case you intend to cancel the

repairing process.

• If you intend to cancel the repairing process, press [A OPEN/CLOSE]

on the front panel, then select “Yes” and press [ENTER]. After that, press

[OPEN/CLOSE A] to take out the disc. The disc canceled during the

repairing process MAY NOT work.

Do you want to cancel a repairing

process ? When selecting “Yes”,

the disc may not be usable.

Yes

Repairing

96 EN

E7PCAUD_DR420KU_EN.indd 96

2/6/2009 10:56:04 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Error message

Cause

Solution

Disc Error

• Unplayable disc is inserted in the unit.

• The disc is upside down.

• Insert the standardized disc which have

— Please eject the disc. —

Playback feature may not be available on this disc.

the marks on pages 9-10.

•

Insert the disc with the labeled side facing up.

Region Error

— Please eject the disc. —

Playback is not authorized in your region.

• Playback is not authorized in the region

of the DVD-video which you inserted in

the unit.

• Insert the DVD-video with region codes

1 or ALL.

Parental Lock On

The current selected parental level

prohibits playback.

• The current selected parental level

prohibits playback.

• Check “Parental Lock” setting in

“Playback” menu (page 84).

Recording Error

This program is not allowed to be recorded.

• You are trying to record the copy

prohibited program.

• You cannot record copy prohibited

programs.

Recording Error

This program is not recordable in Video

mode.

• You are trying to record the copy-once

program onto the DVD-RW disc in video

mode.

• Set “Format Mode” to “VR mode” (page

27).

Recording Error

This program is not recordable in +VR mode.

• You are trying to record the copy-once

program.

• Insert the DVD-RW disc in VR mode

(ver.1.1 or 1.2 compatible with CPRM).

Recording Error

Cannot record on this disc.

• You are trying to record onto the disc

which is unrecordable, or the disc status

is unable to record.

• Insert the recordable disc, and ensure

the disc status satisfies the recording

requirements (page 9).

• Clean the disc with a cleaning cloth.

• Replace the disc.

• The disc is dirty.

• The disc is damaged.

Recording Error

This program is not allowed to be

recorded on this disc.

• You are trying to record the copy-once

program onto the DVD-RW disc which

is not compatible with CPRM.

• Insert the DVD-RW disc in VR mode

(ver.1.1 or 1.2 compatible with CPRM).

Recording Error

This disc is protected and not recordable.

•

You are trying to record on to the protected

disc which is set in “DVD Menu” menu.

• Release the disc protect setting in “DVD

Menu” menu (page 29).

Recording Error

• You are trying to record onto the disc

which has no space for recording.

• Insert the recordable disc with enough

recording space.

Disc is full.

(No area for new recording)

Recording Error

•

You are trying to record onto the DVD-RW/-R • Delete unnecessary titles (pages 67-68).

on which the number of recording titles

You cannot record more than 99 titles on one disc.

(The maximum is 99)

comes up to the maximum (99).

Recording Error

You cannot record more than 999 chapters on one disc.

(The maximum is 999)

You are trying to record onto the VR mode

DVD-RW on which the number of recording

chapters comes up to the maximum (999).

• Delete unnecessary chapter marks

(page 73).

Recording Error

You cannot record more than 49 titles on one disc.

(The maximum is 49)

You are trying to record onto the DVD+RW/+R • Delete unnecessary titles (pages 67-68).

on which the number of recording titles

comes up to the maximum (49).

Recording Error

You cannot record more than 254 chapters on one disc.

(The maximum is 254)

You are trying to record onto the DVD+RW

on which the number of recording

chapters comes up to the maximum (254).

• Delete unnecessary chapter marks

(page 73).

Recording Error

You cannot record on this disc as Control

Information is full.

This disc has no space to write the Control

• Delete unnecessary titles (pages 67-68).

Information when recording or deleting contents.

When editing has been repeatedly performed,

the control Information area may come up to be

full even the recording area has enough space.

Recording Error

You cannot record on this disc as Power

Calibration Area is full.

•

When recordings are performed

• Insert a new disc.

repeatedly onto an unstable disc, this

area may come up to be full.

Every time you insert a disc for recording,

the disc’s working area will be taken up.

And if you repeat this frequently, it will

be used up sooner and you may not be

able to record full 49 titles.

Recording Error

This disc is already finalized.

• You are trying to record onto the disc

already finalized.

• Undo the finalizing for this disc

(page 32).

Recording Error

• You are trying to record onto the

unfinalized +VR mode discs recorded

on other unit.

• Set “Make Recording Compatible” to

“ON” to rewrite the menu, after that you

will record to disc (page 34).

The disc has no recording compatibility.

(Set “Make Recording Compatible” to

“ON” to convert the disc menu.)

* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the

error description for calling our help line to locate an Authorized Service Center.

Frequently Asked Questions

– Can I record to CD-RW/-R?

No, this unit records only DVD.

– Can I play back DVD-video that is bought in another country? Possible when the region code of the disc is 1 and All.

– Can I connect the unit to my PC?

– Can I program a timer recording with cable/satellite box?

No, you cannot control the unit by PC.

Yes, you can. Select “L1 (Rear)” or “L2 (Front)” as your

recording channel, and leave the cable/satellite box on

(pages 18, 26 and 38-41).

EN 97

E7PCAUD_DR420KU_EN.indd 97

2/6/2009 10:56:04 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

LANGUAGE CODE

Language

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Code

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

5261

5256

5255

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

Language

Hungarian

Icelandic

Indonesian

Interlingua

Interlingue

Inupiak

Code

5467

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

5861

5847

5868

5860

5866

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

Language

Russian

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

Setswana

Shona

Code

6467

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

6565

6557

6558

6561

5165

6567

6569

6568

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Irish

Italian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Korean

Kurdish

Laothian

Latin

Latvian; Lettish

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian

Occitan

Oriya

Oromo (Afan)

Panjabi

Pashto; Pushto

Persian

Polish

Portuguese

Quechua

Rhaeto-Romance

Romanian

Sindhi

Singhalese

Siswat

Slovak

Slovenian

Somali

Spanish

Sundanese

Swahili

Swedish

Tagalog

Tajik

Basque

Bengali;Bangla

Bhutani

Bihari

Bislama

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

Fiji

Finnish

French

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish

Turkmen

Twi

Ukrainian

Urdu

Frisian

Uzbek

Galician

Georgian

German

Greek

Greenlandic

Guarani

Gujarati

Hausa

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Hebrew

Hindi

98 EN

E7PCAUD_DR420KU_EN.indd 98

2/6/2009 10:56:04 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GLOSSARY

Analog Audio

PCM (pulse code modulation)

An electrical signal that directly represents sound.

The most common system of encoding digital audio,

found on CD and DAT. Excellent quality, but requires a

Compare this to digital audio which can be an electrical

signal, but is an indirect representation of sound. See also lot of data compared to formats such as Dolby Digital

“Digital Audio”.

and MPEG audio. For compatibility with digital audio

recorders (CD, MD and DAT) and AV amplifiers with

digital inputs, this unit can convert Dolby Digital and

MPEG audio to PCM. See also “Digital Audio”.

Aspect Ratio

The width of a TV screen relative to its height.

Conventional TVs are 4:3 (in other words, the TV screen

is almost square); widescreen models are 16:9 (the TV

screen is almost twice as wide as it is high).

Progressive Scan (480p)

A type of display that does not split each frame into

fields, and instead scans directly through all the scanlines

of each frame in order. Progressive scan provides less

flickering and higher image resolution than traditional

(480i) TV signals. Refer to page 90 for instructions on

selective progressive scan mode.

Chapter

Just as a book is split up into several chapters, a title on a

DVD is usually divided into chapters. See also “Title”.

Component Video Output

Each signal of luminance (Y) and component (PB/CB, PR/

C^R) is independent to output so that you can experience

picture color as it is.

Also, due to compatibility with progressive video (480p),

you can experience higher-density picture than that in

interlace (480i).

Region Code

Regions associate discs and players with particular areas

of the world. This unit will only play back discs that have

compatible region codes. You can find the region code

of your unit by looking on the rear panel. Some discs are

compatible with more than one region (or all regions).

Digital Audio

Sampling Frequency

An indirect representation of sound by numbers. During

recording, the sound is measured at discrete intervals

(44,100 times a second for CD audio) by an analog-

to-digital converter, generating a stream of numbers.

On playback, a digital-to-analog converter generates

an analog signal based on these numbers. See also

“Sampling Frequency” and “Analog Audio”.

The rate which sound is measured by a specified interval

to turn into digital audio data. The numbers of sampling

in one second defines as sampling frequency. The higher

the rate, the better the sound quality.

S-Video Output

It delivers independently each signal of color(C) and

luminance(Y) to TV as video signals, so that higher-quality

picture will be gained.

Dolby® Digital

The system to compress digital sound developed by

Dolby Laboratories. It offers you sound of stereo(2ch) or

multi channel audio.

Title (DVD only)

A collection of chapters on DVD. See also “Chapter”.

DTS® (Digital Theater System)

Track

DTS is a multi channel surround sound system. By

connecting to DTS decoder you can enjoy dynamic and

realistic sound like movie theatre. DTS surround sound

technologies were developed by DTS, Inc.

Audio CD use tracks to divide up the content of a disc.

The DVD equivalent is called a chapter. See also “Chapter”.

Video mode

Video mode is the same recording format as used on

the DVD videos you purchase in local shops. You can

play back the discs recorded in this format in most DVD

players, however it offers only limited editing. You will

need to finalize discs recorded in video mode before

playing them back on other unit.

Finalize

To make DVD, which have been recorded on, possible to

play back in DVD players.

HDMI™ (high definition multimedia interface)

A digital interface between audio and video source. It can

transmit component video, audio, and control signal with

one cable connection.

VR mode

A basic recording format for DVD-RW. VR mode offers

advanced editing, however it is playable only on VR

mode compatible unit. Finalization is recommended

before playing them back on other unit.

JPEG (joint photographic experts group)

JPEG is a method of compressing still image files. You can

copy JPEG files on CD-RW/-R from a computer and play

back the files on this unit.

+VR mode

A recording format for DVD+RW/+R. +VR mode offers basic

editing, and it is playable on most DVD players. Finalization

is recommended before playing them back on other unit.

MP3 (MPEG audio layer 3)

MP3 is a method of compressing files. You can copy MP3

files on CD-RW/-R from the computer and play back the

files on this unit.

EN 99

E7PCAUD_DR420KU_EN.indd 99

2/6/2009 10:56:04 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

• This model complies with the below specifications.

• Designs and specifications are subject to change without notice.

• This model may not be compatible with features and/or specifications that may be added in the future.

General

Power requirements

Power consumption

Weight

AC120 V, 60 Hz

17 W (standby: 2.5 W)

5.3 lbs ( 2.4 kg )

Dimensions (width x height x depth)

Operating temperature

Operating humidity

TV system

16.6” x 2.4” x 9.8” (420 x 59.0 x 247 mm)

41 °F to 104 °F (5 °C to 40 °C)

Less than 80% (no condensation)

NTSC TV standard

Recording

Recording format

VR (video recording) format

Video format

+VR format

Recording discs

DVD-Rewritable/-Recordable, DVD+Rewritable/+Recordable

Video recording format

Sampling frequency

Compression format

Audio recording format

Sampling frequency

Compression format

13.5 MHz

MPEG

48 kHz

Dolby Digital/LPCM (XP Recording mode only)

Input / Output

Video input

Input 1 (rear), 2 (front)

1 Vp-p (75Ω)

RCA jack

Input level

Jacks

Video output

Output level

Jack

S-video input

Y (luminance) - Input level

C (color) - Input level

Jacks

S-video output

Y (luminance) - Output level

C (color) - Output level

Jack

Output 1 (rear)

1 Vp-p (75Ω)

RCA jack

Input 1 (rear), 2 (front)

1 Vp-p (75Ω)

286 mVp-p (75Ω)

4 pin mini DIN

Output 1 (rear)

1 Vp-p (75Ω)

286 mVp-p (75Ω)

4 pin mini DIN

Component video output

Output level

Jacks

Output 1 (rear)

Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)

RCA jacks

HDMI output

Jack

HDMI jack

Audio input

During audio input

Jacks

Audio output

During audio output

Jacks

Input 1 (rear), 2 (front) L/R

2 V rms (input impedance: more than 22 kΩ)

RCA jacks

Output 1 L/R (rear)

2 V rms (output impedance: less than 1 kΩ)

RCA jacks

Digital audio output

Output level

Jack

DV input

Jack

Output 1 (rear) COAXIAL

500 mVp-p (75Ω)

RCA jack

IEEE 1394

DV input jack (4 pin)

100 EN

E7PCAUD_DR420KU_EN.indd 100

2/6/2009 10:56:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

Limited United States Warranty

Digital Audio Video (“DAV”) Product - Exchange Warranty

Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States.

THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT

AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.

DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA

AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.

DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED

IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.

Limited Warranty

How to Obtain Warranty Services

TACP warrants this DAV Product and its parts against defects in materials

or workmanship for a period of ninety (90) days after the date of original

retail purchase.

If, after following all of the operating instructions in this manual and checking

the section “TROUBLESHOOTING,” you find that service is needed:

DURING THIS PERIOD, TACP WILL EXCHANGE A DEFECTIVE DAV

PRODUCT WITH A NEW OR REFURBISHED DAV PRODUCT WITHOUT

CHARGE TO YOU. DURING THE PERIOD THAT COMMENCES ON THE

DATE THAT IS NINETY ONE (91) DAYS AFTER THE DATE OF ORIGINAL

RETAIL PURCHASE AND ENDS ON THE DATE THAT IS THREE HUNDRED

SIXTY FIVE (365) DAYS AFTER THE DATE OF ORIGINAL RETAIL

PURCHASE, TACP WILL EXCHANGE A DEFECTIVE DAV PRODUCT

WITH A NEW OR REFURBISHED DAV PRODUCT FOR A FEE.

(1) For instructions on how to obtain warranty service for your DAV Product

under the TACP DAV Product Warranty Exchange Program, contact

TACP’s Consumer Solutions Center toll free at 1-800-631-3811.

(2) You must include the original bill of sale (or a copy of the original bill

of sale) or other proof of purchase along with the entire DAV Product

when sending the DAV Product to the TACP Warranty Exchange Center

specified by TACP’s Consumer Solutions Center. You are responsible

for all inbound transportation and insurance charges for the DAV Product

to the TACP Warranty Exchange Center.

Rental Units

The warranty for DAV Product rental units begins on the date of the first

rental or thirty (30) days after the date of shipment to the rental firm,

whichever comes first.

For additional information, visit TACP’s website: www.tacp.toshiba.com

ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.

S.A., INCLUDINGTHE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY

LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET

FORTH ABOVE.WITH THE EXCEPTION OF ANY WARRANTIES

IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY

LIMITED,THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU

OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND

SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR

OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE

LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING,

BUT NOT LIMITEDTO, LOST PROFITS, BUSINESS INTERRUPTION,

OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY

USE, MISUSE OR INABILITY TO USE THIS DAV PRODUCT).

Commercial Units

DAV Products sold and used for commercial purposes have a limited

warranty for all parts and labor, which warranty begins on the date of

original retail purchase and ends on the date that is ninety (90) days

thereafter.

Owner’s Manual and Product Registration Card

Read this owner’s manual thoroughly before operating this DAV Product.

Complete and mail the enclosed product registration card or register your

DAV Product on-line at

www.tacp.toshiba.com/service as soon as possible.

By registering your DAV Product you will enable TACP to bring you new

products specifically designed to meet your needs and help us to contact

you in the unlikely event a safety notification is required under the U.S.

Consumer Product Safety Act. Failure to complete and return the product

registration card does not diminish your warranty rights.

No person, agent, distributor, dealer, or company is authorized to change,

modify, or extend the terms of these warranties in any manner whatsoever.

The time within which an action must be commenced to enforce any

obligation of TACP arising under the warranty or under any statute or law

of the United States or any state thereof is hereby limited to ninety (90)

days from the date you discover, or should have discovered, the defect.

This limitation does not apply to implied warranties arising under state law.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING

CONDITIONS:

THIS WARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS AND YOU

MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO

STATE INTHE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,WHEN

AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SOTHE ABOVE

PROVISIONS MAY NOT APPLY TOYOU UNDER SUCH CIRCUMSTANCES.

(1) You must retain your bill of sale or provide other proof of purchase.

(2) All warranty servicing of this DAV Product must be made pursuant

to the TACP DAV Product Warranty Exchange Program.

(3) The warranties from TACP are effective only if the DAV Product is

purchased and operated in the Continental U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, setup, adjustment of customer

controls, and installation or repair of antenna systems are not covered

by this warranty. Reception problems caused by inadequate antenna

systems are your responsibility.

(5) Warranties extend only to defects in materials or workmanship as

limited above, and do not extend to any DAV Product or parts that

have been lost or discarded by you or to damage to the DAV Product

or parts caused by fires, misuse, accident, Acts of God (such as

lightning or fluctuations in electric power), improper installation,

improper maintenance, or use in violation of instructions furnished by

TACP; use or malfunction through simultaneous use of this DAV Product

and connected equipment; or to units that have been modified or had

the serial number removed, altered, defaced, or rendered illegible.

(6) This warranty does not cover Product sold AS IS or WITH ALL

FAULTS.

EN 101

E7PCAUD_DR420KU_EN.indd 101

2/6/2009 10:56:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

/LPLWHGꢀ&DQDGLDQꢀ:DUUDQW\

)RUꢀ7RVKLEDꢀ%UDQGꢀ'LJLWDOꢀ$XGLRꢁ9LGHRꢀ3URGXFWV

7RVKLEDꢀRIꢀ&DQDGDꢀ/LPLWHGꢀꢁꢂ7&/ꢂꢃꢀPDNHVꢀWKHꢀIROORZLQJꢀOLPLWHGꢀZDUUDQWLHVꢀWRꢀRULJLQDOꢀFRQVXPHUVꢀLQꢀ&DQDGDꢄꢀ7+(6(ꢀ/,0,7('ꢀ

:$55$17,(6ꢀ(;7(1'ꢀ72ꢀ7+(ꢀ25,*,1$/ꢀ&21680(5ꢀ385&+$6(5ꢀ25ꢀ$1<ꢀ3(5621ꢀ5(&(,9,1*ꢀ7+,6ꢀ726+,%$ꢀ%5$1'ꢀ

',*,7$/ꢀ$8',2ꢁ9,'(2ꢀ352'8&7ꢀꢂWKHꢀꢃ'$9ꢀ352'8&7ꢂ6ꢄꢃꢀRUꢀꢃ'$9ꢀ3URGXFWꢂVꢄꢃꢄꢀ$6ꢀ$ꢀ*,)7ꢀ)520ꢀ7+(ꢀ25,*,1$/ꢀ&21680(5ꢀ

385&+$6(5ꢀ$1'ꢀ72ꢀ12ꢀ27+(5ꢀ385&+$6(5ꢀ25ꢀ75$16)(5((ꢅ

'$9ꢀ352'8&76ꢀ385&+$6('ꢀ,1ꢀ&$1$'$ꢆꢀ$1'ꢀ86('ꢀ$1<:+(5(ꢀ2876,'(ꢀ2)ꢀ&$1$'$ꢀ,1&/8',1*ꢆꢀ:,7+287ꢀ/,0,7$7,21ꢆꢀ

7+(ꢀ81,7('ꢀ67$7(6ꢀ$1'ꢀ0(;,&2ꢆꢀ$5(ꢀ127ꢀ&29(5('ꢀ%<ꢀ7+(6(ꢀ:$55$17,(6ꢅꢀꢀ

'$9ꢀ352'8&76ꢀ385&+$6('ꢀ$1<:+(5(ꢀ2876,'(ꢀ2)ꢀ&$1$'$ꢆꢀ,1&/8',1*ꢆꢀ:,7+287ꢀ/,0,7$7,21ꢆꢀ7+(ꢀ81,7('ꢀ67$7(6ꢀ

$1'ꢀ0(;,&2ꢆꢀ$1'ꢀ86('ꢀ,1ꢀ&$1$'$ꢆꢀ$5(ꢀ127ꢀ&29(5('ꢀ%<ꢀ7+(6(ꢀ:$55$17,(6ꢅ

Fꢄ 5HSDLUꢀRIꢀGDPDJHꢀWKDWꢀLVꢀFRVPHWLFꢀRQO\ꢀRUꢀGRHVꢀQRWꢀDIIHFWꢀ

WKHꢀ'$9ꢀ3URGXFWꢀIXQFWLRQDOLW\ꢅꢀVXFKꢀDVꢀZHDUꢀDQGꢀWHDUꢅꢀ

VFUDWFKHVꢀDQGꢀGHQWVꢏ

Gꢄ 6HUYLFHꢀRQꢀ7RVKLEDꢐEUDQGHGꢀDFFHVVRU\ꢀLWHPVꢀꢁVXFKꢀ

DFFHVVRU\ꢀLWHPVꢀPD\ꢀEHꢀFRYHUHGꢀE\ꢀWKHLUꢀRZQꢀZDUUDQW\ꢃꢏ

Hꢄ 6HUYLFHꢀRQꢀWKLUGꢀSDUW\ꢀSURGXFWVꢀRUꢀVHUYLFHꢀPDGHꢀQHFHVVDU\ꢀ

E\ꢀXVHꢀRIꢀLQFRPSDWLEOHꢀWKLUGꢀSDUW\ꢀSURGXFWVꢏꢀ

/LPLWHGꢀ2QHꢀꢂꢇꢄꢀ<HDUꢀ:DUUDQW\ꢀRQꢀ3DUWVꢀDQGꢀ/DERXU

6XEMHFWꢀWRꢀWKHꢀPRUHꢀOLPLWHGꢀZDUUDQW\ꢀLIꢀWKHꢀ'$9ꢀ3URGXFWꢀLVꢀXVHGꢀIRUꢀ

DQ\ꢀFRPPHUFLDOꢀRUꢀEXVLQHVVꢀSXUSRVHVꢀDVꢀVHWꢀRXWꢀEHORZꢅꢀ7&/ꢀ

ZDUUDQWVꢀWKHꢀ'$9ꢀ3URGXFWꢀDQGꢀLWVꢀSDUWVꢀDJDLQVWꢀPDWHULDOꢀGHIHFWVꢀLQꢀ

PDWHULDOVꢀRUꢀZRUNPDQVKLSꢀWKDWꢀUHVXOWꢀLQꢀWKHꢀ'$9ꢀ3URGXFWꢀIDLOLQJꢀIRUꢀ

DꢀSHULRGꢀRIꢀRQHꢀꢁꢆꢃꢀ\HDUꢀDIWHUꢀWKHꢀGDWHꢀRIꢀRULJLQDOꢀUHWDLOꢀSXUFKDVHꢄꢀ

'85,1*ꢀ7+,6ꢀ3(5,2'ꢆꢀ7&/ꢀ:,//ꢆꢀ$7ꢀ7&/·6ꢀ237,21ꢆꢀ5(3$,5ꢀ

25ꢀ5(3/$&(ꢀ$ꢀ'()(&7,9(ꢀ3$57ꢀ:,7+ꢀ$ꢀ1(:ꢀ25ꢀ

5()85%,6+('ꢀ3$57ꢆꢀ:,7+287ꢀ&+$5*(ꢀ72ꢀ<28ꢀ)25ꢀ

3$576ꢀ25ꢀ/$%285ꢅꢀ<28ꢀ0867ꢀ'(/,9(5ꢀ7+(ꢀ(17,5(ꢀ'$9ꢀ

352'8&7ꢀ72ꢀ$ꢀ7&/ꢀ'$9ꢀ352'8&7ꢀ$87+25,=('ꢀ6(59,&(ꢀ

3529,'(5ꢀꢂꢃ$63ꢃꢄꢅꢀ<28ꢀ0867ꢀ3$<ꢀ)25ꢀ$//ꢀ

75$163257$7,21ꢀ$1'ꢀ,1685$1&(ꢀ&+$5*(6ꢀ)25ꢀ7+(ꢀ

'$9ꢀ352'8&7ꢀ72ꢀ$1'ꢀ)520ꢀ7+(ꢀ$63ꢅꢀ

5HQWDOꢀ8QLWV

7KHꢀZDUUDQW\ꢀIRUꢀ'$9ꢀ3URGXFWꢀUHQWDOꢀXQLWVꢀEHJLQVꢀZLWKꢀWKHꢀGDWHꢀRIꢀ

ILUVWꢀUHQWDOꢀRUꢀWKLUW\ꢀꢁꢇꢈꢃꢀGD\VꢀIURPꢀWKHꢀGDWHꢀRIꢀVKLSPHQWꢀWRꢀWKHꢀUHQWDOꢀ

ILUPꢅꢀZKLFKHYHUꢀFRPHVꢀILUVWꢄ

Iꢄ 6HUYLFHꢀPDGHꢀQHFHVVDU\ꢀE\ꢀWKHꢀVLPXOWDQHRXVꢀXVHꢀRIꢀWKLVꢀ

'$9ꢀ3URGXFWꢀDQGꢀFRQQHFWHGꢀHTXLSPHQWꢏꢀ

Jꢄ

0RGLILFDWLRQVꢀWRꢀWKHꢀ'$9ꢀ3URGXFWꢀQRWꢀDSSURYHGꢀLQꢀZULWLQJꢀ

E\ꢀ7&/ꢅꢀDQGꢀVHUYLFHꢀPDGHꢀQHFHVVDU\ꢀE\ꢀWKHꢀXVHꢀRUꢀ

LQVWDOODWLRQꢀRIꢀQRQꢐ7RVKLEDꢀPRGLILFDWLRQVꢀWRꢀWKHꢀ'$9ꢀ

3URGXFWꢏꢀ

Kꢄ 6HUYLFHꢀRIꢀDꢀ'$9ꢀ3URGXFWꢀRQꢀZKLFKꢀWKHꢀ726+,%$ꢀODEHOꢀRUꢀ

ORJRꢅꢀUDWLQJꢀODEHOꢀRUꢀVHULDOꢀQXPEHUꢀKDYHꢀEHHQꢀGHIDFHGꢀRUꢀ

UHPRYHGꢏ

Lꢄ 2QꢐVLWHꢀVHUYLFHꢀDQGꢀUHSDLUꢀRIꢀWKHꢀ'$9ꢀ3URGXFWꢏ

Mꢄ 'DPDJHꢀWRꢀWKHꢀ'$9ꢀ3URGXFWꢀFDXVHGꢀE\ꢀIDLOXUHꢀWRꢀIROORZꢀ

WKHꢀVSHFLILFDWLRQVꢅꢀ8VHUꢀPDQXDOVꢀRUꢀJXLGHVꢀDVꢀWRꢀXVDJHꢀ

DQGꢌRUꢀVWRUDJHꢄ

/LPLWHGꢀ:DUUDQW\ꢀIRUꢀ&RPPHUFLDOꢀ8QLWV

7&/ꢀZDUUDQWVꢀ'$9ꢀ3URGXFWVꢀWKDWꢀDUHꢀXVHGꢀIRUꢀDQ\ꢀFRPPHUFLDOꢀRUꢀ

EXVLQHVVꢀSXUSRVHVꢀDVꢀIROORZVꢉꢀꢀDOOꢀSDUWVꢀDUHꢀZDUUDQWHGꢀDJDLQVWꢀ

PDWHULDOꢀGHIHFWVꢀLQꢀPDWHULDOVꢀRUꢀZRUNPDQVKLSꢀWKDWꢀUHVXOWꢀLQꢀWKHꢀ'$9ꢀ

3URGXFWꢀIDLOLQJꢀIRUꢀDꢀSHULRGꢀRIꢀQLQHW\ꢀꢁꢊꢈꢃꢀGD\VꢀDIWHUꢀWKHꢀGDWHꢀRIꢀ

RULJLQDOꢀUHWDLOꢀSXUFKDVHꢄꢀ'85,1*ꢀ7+,6ꢀ3(5,2'ꢆꢀ7&/ꢀ:,//ꢆꢀ

$7ꢀ7&/·6ꢀ237,21ꢆꢀ5(3$,5ꢀ25ꢀ5(3/$&(ꢀ$ꢀ'()(&7,9(ꢀ3$57ꢀ

:,7+ꢀ$ꢀ1(:ꢀ25ꢀ5()85%,6+('ꢀ3$57ꢆꢀ:,7+287ꢀ&+$5*(ꢀ

72ꢀ<28ꢀ)25ꢀ3$576ꢀ25ꢀ/$%285ꢅꢀꢀ<28ꢀ0867ꢀ'(/,9(5ꢀ7+(ꢀ

(17,5(ꢀ'$9ꢀ352'8&7ꢀ72ꢀ$1ꢀ$63ꢅꢀ<28ꢀ0867ꢀ3$<ꢀ)25ꢀ$//ꢀ

75$163257$7,21ꢀ$1'ꢀ,1685$1&(ꢀ&+$5*(6ꢀ)25ꢀ7+(ꢀ

'$9ꢀ352'8&7ꢀ72ꢀ$1'ꢀ)520ꢀ7+(ꢀ$63ꢅ

'LVFODLPHUꢀDQGꢀ/LPLWDWLRQꢀRIꢀ5HPHG\

72ꢀ7+(ꢀ(;7(17ꢀ127ꢀ35(&/8'('ꢀ%<ꢀ/$:ꢆꢀ$//ꢀ27+(5ꢀ

(;35(66ꢀ$1'ꢀ,03/,('ꢀ:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ

5(35(6(17$7,216ꢀ)25ꢀ7+,6ꢀ'$9ꢀ352'8&7ꢆꢀ,1&/8',1*ꢀ

7+(ꢀ,03/,('ꢀ:$55$17,(6ꢀ$1'ꢀ&21',7,216ꢀ2)ꢀ

0(5&+$17$%,/,7<ꢀ$1'ꢀ),71(66ꢀ)25ꢀ$ꢀ3$57,&8/$5ꢀ

385326(ꢆꢀ$5(ꢀ+(5(%<ꢀ',6&/$,0('ꢀ$1'ꢀ(;&/8'('ꢅꢀꢀ

,)ꢀ7+(ꢀ$33/,&$%/(ꢀ/$:ꢆꢀ67$78725<ꢀ25ꢀ27+(5:,6(ꢆꢀ

35(&/8'(6ꢀ7+(ꢀ(;&/86,21ꢀ2)ꢀ$1<ꢀ,03/,('ꢀ

:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ5(35(6(17$7,216ꢀ

7+(1ꢀ68&+ꢀ,03/,('ꢀ:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ

5(35(6(17$7,216ꢀ$5(ꢀ27+(5:,6(ꢀ/,0,7('ꢀ,1ꢀ

'85$7,21ꢀ72ꢀ7+(ꢀ7(50ꢀ2)ꢀ7+,6ꢀ(;35(66ꢀ:5,77(1ꢀ

/,0,7('ꢀ:$55$17<ꢅꢀꢀ72ꢀ7+(ꢀ(;7(17ꢀ127ꢀ35(&/8'('ꢀ

%<ꢀ/$:ꢆꢀ67$78725<ꢀ25ꢀ27+(5:,6(ꢆꢀ7+,6ꢀ:5,77(1ꢀ

:$55$17<ꢀ683(5&('(6ꢀ$1'ꢀ63(&,),&$//<ꢀ',6&/$,06ꢀ

$1<ꢀ27+(5ꢀ:$55$17<ꢆꢀ&21',7,21ꢀ25ꢀ5(35(6(17$7,21ꢀ

127ꢀ67$7('ꢀ,1ꢀ7+,6ꢀ:$55$17<ꢆꢀ:+(7+(5ꢀ0$'(ꢀ%<ꢀꢀ

7&/ꢆꢀ726+,%$ꢀ&25325$7,21ꢆꢀꢀ7+(,5ꢀ$)),/,$7(6ꢆꢀ$'5Vꢀ

$1'ꢀ$63Vꢀ$1'ꢀ:+(7+(5ꢀ0$'(ꢀ25$//<ꢀ25ꢀ,1ꢀ:5,7,1*ꢀ

ꢂ,1&/8',1*ꢀ$1<ꢀ67$7(0(17ꢀ,1ꢀ$1<ꢀ%52&+85(ꢆꢀ35(66ꢀ

5(/($6(ꢆꢀ$11281&(0(17ꢆꢀ$'9(57,6(0(17ꢆꢀ32,17ꢀ2)ꢀ

6$/(ꢀ',63/$<ꢆꢀ(7&ꢅꢄꢅꢀꢀ

<RXUꢀ5HVSRQVLELOLW\

7+(ꢀ$%29(ꢀ:$55$17,(6ꢀ$5(ꢀ68%-(&7ꢀ72ꢀ7+(ꢀ

)2//2:,1*ꢀ&21',7,216ꢈ

ꢁꢆꢃꢀꢀ<RXꢀPXVWꢀSURYLGHꢀ\RXUꢀELOOꢀRIꢀVDOHꢀRUꢀRWKHUꢀSURRIꢀRIꢀSXUFKDVHꢄ

ꢁꢋꢃꢀꢀ$OOꢀZDUUDQW\ꢀVHUYLFLQJꢀRIꢀWKLVꢀ'$9ꢀ3URGXFWꢀPXVWꢀEHꢀSHUIRUPHGꢀ

ꢀꢀꢀꢀꢀꢀE\ꢀDQꢀ$63ꢄ

ꢁꢇꢃꢀꢀ7KHꢀZDUUDQWLHVꢀIURPꢀ7&/ꢀDUHꢀHIIHFWLYHꢀRQO\ꢀLIꢀWKHꢀ'$9ꢀ3URGXFWꢀ

ꢀꢀꢀꢀꢀꢀLVꢀꢁLꢃꢀSXUFKDVHGꢀDVꢀQHZꢀDQGꢀXQRSHQHGꢀIURPꢀ7&/ꢀRUꢀIURPꢀ7&/·Vꢀ

ꢀꢀꢀꢀꢀꢀDXWKRUL]HGꢀGLVWULEXWRUVꢅꢀGHDOHUVꢀRUꢀUHVHOOHUVꢀꢁꢃ$'5·VꢃꢃꢀDQGꢀꢁLLꢃꢀ

ꢀꢀꢀꢀꢀꢀORFDWHGꢌRSHUDWHGꢀLQꢀ&DQDGDꢄ

ꢁꢍꢃꢀꢀ:DUUDQWLHVꢀH[WHQGꢀRQO\ꢀWRꢀPDWHULDOꢀGHIHFWVꢀLQꢀPDWHULDOVꢀRUꢀ

ꢀꢀꢀꢀꢀꢀZRUNPDQVKLSꢀDVꢀOLPLWHGꢀDERYHꢅꢀDQGꢀGRꢀQRWꢀH[WHQGꢀWRꢉ

Dꢄ 6HUYLFHꢅꢀUHSDLUVꢀRUꢀUHSODFHPHQWꢀPDGHꢀQHFHVVDU\ꢀE\ꢀDFFLGHQWꢅ

PLVXVHꢅꢀDEXVHꢅꢀPRLVWXUHꢅꢀOLTXLGVꢅꢀGXVWꢅꢀGLUWꢅꢀQHJOHFWꢅꢀDFFLGHQWꢅꢀ

GDPDJHꢅꢀꢋꢍꢌꢎꢀDSSOLFDWLRQVꢅꢀLPSURSHUꢀLQVWDOODWLRQꢅꢀLPSURSHUꢀ

<28ꢀ0867ꢀ5($'ꢀ$1'ꢀ)2//2:ꢀ$//ꢀ6(7ꢐ83ꢀ$1'ꢀ86$*(ꢀ

,16758&7,216ꢀ,1ꢀ7+(ꢀ$33/,&$%/(ꢀ86(5ꢀ*8,'(6ꢀ$1'ꢌ25ꢀ

0$18$/6ꢄꢀ,)ꢀ<28ꢀ)$,/ꢀ72ꢀ'2ꢀ62ꢅꢀ7+,6ꢀ'$9ꢀ352'8&7ꢀ0$<ꢀ

127ꢀ)81&7,21ꢀ3523(5/<ꢀ$1'ꢀ<28ꢀ0$<ꢀ68))(5ꢀ'$0$*(ꢄꢀ

7+,6ꢀ:$55$17<ꢀ:,//ꢀ127ꢀ&29(5ꢀ$1<ꢀ6(59,&(ꢀ7+$7ꢀ,6ꢀ

5(48,5('ꢅꢀ,1ꢀ3$57ꢀ25ꢀ,1ꢀ:+2/(ꢅꢀ$6ꢀ$ꢀ5(68/7ꢀ2)ꢀ$1<ꢀ

)$,/85(ꢀ72ꢀ)2//2:ꢀ7+(ꢀ6(7ꢐ83ꢀ$1'ꢀ86$*(ꢀ

,16758&7,216ꢄꢀꢀꢀ7+,6ꢀ:$55$17<ꢀ'2(6ꢀ127ꢀ$33/<ꢀ$1'ꢀ

6+$//ꢀ%(ꢀ92,'ꢀ$1'ꢀ81(1)25&($%/(ꢀ,)ꢀ7+(ꢀ'$9ꢀ

352'8&7ꢀ,6ꢀ23(1('ꢅꢀ6(59,&('ꢅꢀ25ꢀ5(3$,5('ꢀ%<ꢀ

3(56216ꢀ27+(5ꢀ7+$1ꢀ7+26(ꢀ$87+25,=('ꢀ%<ꢀ7&/ꢀ72ꢀ

6(59,&(ꢀ25ꢀ5(3$,5ꢀ7+(ꢀ'$9ꢀ352'8&7ꢄ

RSHUDWLRQꢅꢀLPSURSHUꢀFOHDQLQJꢅꢀLPSURSHUꢀPDLQWHQDQFHꢅꢀQRUPDO

ꢀ

ZHDUꢀDQGꢀWHDUꢅꢀRUꢀDQ\ꢀRWKHUꢀꢀH[WHUQDOꢀFDXVHꢀRUꢀHYHQWꢅꢀDFWꢀRU

RPLVVLRQꢀRXWVLGHꢀWKHꢀFRQWUROꢀRIꢀ7&/ꢅꢀLQFOXGLQJꢀILUHꢅꢀWKHIWꢅꢀDFWV

RIꢀ*RGꢅꢀDOWHUDWLRQꢅꢀSRZHUꢀIDLOXUHVꢅꢀSRZHUꢀVXUJHVꢀRUꢀSRZHU

VKRUWDJHVꢅꢀOLJKWQLQJꢅꢀRWKHUꢀHOHFWULFDOꢀIDXOWVꢅꢀꢀRUꢀUHSDLUVꢅꢀ

ꢀ

PRGLILFDWLRQVꢀRUꢀUHSODFHPHQWVꢀE\ꢀSHUVRQVꢀRWKHUꢀWKDQꢀWKRVH

DXWKRUL]HGꢀE\ꢀ7&/ꢀWRꢀVHUYLFHꢀWKHꢀ'$9ꢀ3URGXFWꢏ

Eꢄ 5HSODFHPHQWꢀRIꢀPLVVLQJꢅꢀGLVFDUGHGꢀRUꢀORVWꢀSDUWVꢅꢀWKHꢀ

SURYLVLRQꢀRIꢀUHWURILWVꢅꢀRUꢀSUHYHQWLYHꢀPDLQWHQDQFHꢏ

102 EN

E7PCAUD_DR420KU_EN.indd 102

2/6/2009 10:56:05 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

,)ꢀ7+(ꢀ'$9ꢀ352'8&7ꢀ)$,/6ꢀ72ꢀ:25.ꢀ$6ꢀ:$55$17('ꢀ$%29(ꢁꢀ

*HQHUDOꢁ3URYLVLRQV

<285ꢀ62/(ꢀ$1'ꢀ(;&/86,9(ꢀ5(0('<ꢀ6+$//ꢀ%(ꢀ5(3$,5ꢀ25ꢀ

5(3/$&(0(17ꢀ2)ꢀ7+(ꢀ'()(&7,9(ꢀ3$57ꢂꢀ,1ꢀ12ꢀ(9(17ꢀ:,//ꢀ

7&/ꢁꢀ726+,%$ꢀ&25325$7,21ꢁꢀ7+(,5ꢀ$)),/,$7(6ꢁꢀ$'5Vꢀ25ꢀ

$63Vꢀꢃ7+(ꢀꢀꢁ5(/$7('ꢁ3$57,(6ꢀꢁꢄꢀ%(ꢀ/,$%/(ꢀ72ꢀ<28ꢀ25ꢀ$1<ꢀ

7+,5'ꢀ3$57<ꢀ)25ꢀ$1<ꢀ'$0$*(6ꢁꢀ021(<ꢁꢀ5(,0%856(0(17ꢁꢀ

&2676ꢀ25ꢀ(;3(16(6ꢂꢀꢀ7+,6ꢀ/,0,7$7,21ꢀ$33/,(6ꢀ72ꢀ'$0$*(6ꢁꢀ

021(<ꢁꢀ5(,0%856(0(17ꢁꢀ&2676ꢀ25ꢀ(;3(16(6ꢀ2)ꢀ$1<ꢀ.,1'ꢀ

:+$762(9(5ꢀ,1&/8',1*ꢀ$1<ꢀ',5(&7ꢀ25ꢀ,1',5(&7ꢀ'$0$*(6ꢁꢀ

'$0$*(ꢀ72ꢀ3523(57<ꢀ25ꢀ3(5621ꢁꢀ/267ꢀ352),76ꢁꢀ/267ꢀ

6$9,1*6ꢁꢀ,1&219(1,(1&(ꢀ25ꢀ27+(5ꢀ63(&,$/ꢁꢀ,1&,'(17$/ꢁꢀ

(;(03/$5<ꢀ25ꢀ&216(48(17,$/ꢀ'$0$*(6ꢁꢀ:+(7+(5ꢀ)25ꢀ

%5($&+ꢀ2)ꢀ:$55$17<ꢁꢀ%5($&+ꢀ2)ꢀ&2175$&7ꢁꢀ7257ꢀ

ꢃ,1&/8',1*ꢀ1(*/,*(1&(ꢄꢁꢀ81'(5ꢀ$ꢀ67$787(ꢀ25ꢀ81'(5ꢀ$1<ꢀ

27+(5ꢀ/$:ꢀ25ꢀ)250ꢀ25ꢀ$&7,21ꢁꢀ25ꢀ:+(7+(5ꢀ$5,6,1*ꢀ287ꢀ

2)ꢀ7+(ꢀ86(ꢀ2)ꢀ25ꢀ,1$%,/,7<ꢀ72ꢀ86(ꢀ7+(ꢀ'$9ꢀ352'8&7ꢁꢀ

(9(1ꢀ,)ꢀ$1<ꢀ2)ꢀ7+(ꢀ5(/$7('ꢀ3$57,(6ꢀ+$6ꢀ%((1ꢀ$'9,6('ꢀ2)ꢀ

7+(ꢀ3266,%,/,7<ꢀ2)ꢀ68&+ꢀ'$0$*(6ꢀ25ꢀ2)ꢀ$1<ꢀ&/$,0ꢀ%<ꢀ

$1<ꢀ27+(5ꢀ3$57<ꢂꢀ

,IꢀDQGꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀDQ\ꢀSURYLVLRQꢀRIꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀ

VKRXOGꢀJHQHUDOO\ꢀEHꢀIRXQGꢀWRꢀEHꢀXQHQIRUFHDEOHꢁꢀWKHꢀ

XQHQIRUFHDEOHꢀSURYLVLRQꢀVKDOOꢀEHꢀVHYHUHGꢀIURPꢀWKHꢀZDUUDQW\ꢀ

DQGꢀGHHPHGꢀQRWꢀWRꢀIRUPꢀSDUWꢀRIꢀWKHꢀZDUUDQW\ꢂꢀꢀ7KHꢀUHPDLQLQJꢀ

SURYLVLRQVꢀRIꢀWKLVꢀZDUUDQW\ꢀVKDOOꢀEHꢀDQGꢀUHPDLQꢀYDOLGꢀDQGꢀ

HQIRUFHDEOHꢂꢀꢀ,IꢀDQGꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀDQ\ꢀSURYLVLRQꢀRIꢀWKLVꢀ

OLPLWHGꢀZDUUDQW\ꢀDVꢀLWꢀUHODWHVꢀWRꢀDQ\ꢀꢀRIꢀWKHꢀ5HODWHGꢀ3DUWLHVꢀLVꢀ

IRXQGꢀWRꢀEHꢀLQYDOLGꢀRUꢀXQHQIRUFHDEOHꢀLQꢀUHVSHFWꢀRIꢀWKDWꢀSDUW\ꢀ

ꢃWKHꢀꢀ([FOXGHGꢁ3DUW\ꢀꢁꢄꢁꢀWKHꢀ([FOXGHGꢀ3DUW\ꢀVKDOOꢀEHꢀGHHPHGꢀ

WRꢀEHꢀVHYHUHGꢀRUꢀH[FOXGHGꢀIURPꢀWKHꢀSURYLVLRQꢁꢀDQGꢀWKHꢀSURYLVLRQꢀ

VKDOOꢀUHPDLQꢀYDOLGꢁꢀHQIRUFHDEOHꢀDQGꢀDSSOLFDEOHꢀLQꢀUHVSHFWꢀRIꢀWKHꢀ

RWKHUꢀRUꢀUHPDLQLQJꢀ5HODWHGꢀ3DUWLHVꢂ

7RꢀWKHꢀH[WHQWꢀSHUPLWWHGꢀE\ꢀODZꢁꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀVKDOOꢀEHꢀ

JRYHUQHGꢀDQGꢀFRQVWUXHGꢀLQꢀDFFRUGDQFHꢀZLWKꢀWKHꢀODZVꢀRIꢀ2QWDULRꢂ

,IꢀWKHUHꢀLVꢀDQ\ꢀLQFRQVLVWHQF\ꢀEHWZHHQꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢁꢀRQꢀ

WKHꢀRQHꢀKDQGꢁꢀDQGꢀDQ\ꢀVWDWHPHQWꢀLQꢀWKHꢀSDFNDJLQJꢀRIꢀWKHꢀ'$9ꢀ

3URGXFWꢀRUꢀLQꢀDQ\ꢀRWKHUꢀGRFXPHQWꢀHQFORVHGꢀZLWKꢁꢀRUꢀXVHGꢀLQꢀWKHꢀ

FRQWH[WꢀRIꢀWKHꢀSURPRWLRQꢀRUꢀVDOHꢀRIꢁꢀWKHꢀ'$9ꢀ3URGXFWꢁꢀRQꢀWKHꢀ

RWKHUꢀKDQGꢁꢀWKHꢀSURYLVLRQVꢀRIꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀVKDOOꢀSUHYDLOꢂ

1RꢀSHUVRQꢁꢀDJHQWꢁꢀGLVWULEXWRUꢁꢀGHDOHUꢀRUꢀFRPSDQ\ꢀLVꢀDXWKRUL]HGꢀWRꢀ

FKDQJHꢁꢀPRGLI\ꢀRUꢀH[WHQGꢀWKHꢀWHUPVꢀRIꢀWKHVHꢀZDUUDQWLHVꢀLQꢀDQ\ꢀ

PDQQHUꢀZKDWVRHYHUꢂꢀ

+RZꢁWRꢁ2EWDLQꢁ:DUUDQW\ꢁ6HUYLFHV

$UELWUDWLRQꢁDQGꢁ'LVSXWHꢁ5HVROXWLRQ

7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀODZꢁꢀDQ\ꢀFODLPꢁꢀGLVSXWHꢁꢀ

,IꢁꢀDIWHUꢀIROORZLQJꢀDOOꢀRIꢀWKHꢀRSHUDWLQJꢀLQVWUXFWLRQVꢀLQꢀWKLVꢀPDQXDOꢀ

DQGꢀFKHFNLQJꢀWKHꢀꢇ7URXEOHVKRRWLQJꢇꢀVHFWLRQꢁꢀ\RXꢀILQGꢀWKDWꢀ

VHUYLFHꢀLVꢀQHHGHGꢅ

FRQWURYHUV\ꢀRUꢀGLVDJUHHPHQWꢀꢃZKHWKHUꢀIRUꢀEUHDFKꢀRIꢀZDUUDQW\ꢁꢀ

EUHDFKꢀRIꢀFRQWUDFWꢁꢀWRUWꢀꢃLQFOXGLQJꢀQHJOLJHQFHꢄꢁꢀXQGHUꢀDꢀVWDWXWHꢀ

RUꢀXQGHUꢀDQ\ꢀRWKHUꢀODZꢀRUꢀIRUPꢀRIꢀDFWLRQꢄꢀDJDLQVWꢀDQ\ꢀRIꢀWKHꢀ

5HODWHGꢀ3DUWLHVꢀDULVLQJꢀRXWꢀRIꢁꢀRUꢀRWKHUZLVHꢀUHODWLQJꢀWRꢅꢀꢃLꢄꢀWKLVꢀ

ZDUUDQW\ꢆꢀꢃLLꢄꢀWKHꢀ'$9ꢀ3URGXFWꢆꢀꢃLLLꢄꢀDQ\ꢀRUDOꢀRUꢀZULWWHQꢀUHSUHVHQWDWLRQVꢁꢀ

VWDWHPHQWVꢁꢀEURFKXUHVꢁꢀSUHVVꢀUHOHDVHVꢁꢀꢀDGYHUWLVLQJꢁꢀDQQRXQFHPHQWꢁꢀ

SRLQWꢀRIꢀVDOHꢀGLVSOD\ꢁꢀRUꢀSURPRWLRQDOꢀPDWHULDOꢀUHODWLQJꢀWRꢀWKHꢀ'$9ꢀ

3URGXFWꢆꢀꢃLYꢄꢀWKHꢀUHODWLRQVKLSVꢀWKDWꢀUHVXOWꢀIURPꢀWKLVꢀZDUUDQW\ꢁꢀꢃWKHꢀ

IRUHJRLQJꢀFODLPVꢁꢀGLVSXWHVꢀFRQWURYHUVLHVꢀDQGꢀGLVDJUHHPHQWVꢀDUHꢀ

FROOHFWLYHO\ꢀUHIHUUHGꢀWRꢀDVꢀWKHꢀꢇ'LVSXWHꢇꢄꢁꢀVKDOOꢀEHꢀUHIHUUHGꢀWRꢀDQGꢀ

UHVROYHGꢀE\ꢀILQDOꢀDQGꢀELQGLQJꢀDUELWUDWLRQꢀꢃWRꢀWKHꢀH[FOXVLRQꢀRIꢀWKHꢀ

FRXUWVꢄꢂꢀꢀ7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀODZꢁꢀ\RXꢀDJUHHꢀWRꢀZDLYHꢀDQ\ꢀ

ULJKWꢀWKDWꢀ\RXꢀPD\ꢀKDYHꢀWRꢀFRPPHQFHꢀRUꢀSDUWLFLSDWHꢀLQꢀDQ\ꢀ

UHSUHVHQWDWLYHꢀRUꢀFODVVꢀSURFHHGLQJꢀDJDLQVWꢀWKHꢀ5HODWHGꢀ3DUWLHVꢀ

UHODWLQJꢀWRꢀDQ\ꢀ'LVSXWHꢂꢀꢀ,IꢀDQGꢀZKHUHꢀDSSOLFDEOHꢀDQGꢀWRꢀWKHꢀH[WHQWꢀQRWꢀ

SUHFOXGHGꢀE\ꢀODZꢁꢀ\RXꢀIXUWKHUꢀDJUHHꢀWRꢀRSWꢀRXWꢀRIꢀDQ\ꢀVXFKꢀ

UHSUHVHQWDWLYHꢀRUꢀFODVVꢀSURFHHGLQJVꢂꢀꢀ$UELWUDWLRQꢀRIꢀDQ\ꢀ'LVSXWHꢀZLOOꢀ

EHꢀFRQGXFWHGꢀLQꢀWKHꢀIRUXPꢀDQGꢀLQꢀWKHꢀPDQQHUꢀDVꢀDJUHHGꢀWRꢀEHWZHHQꢀ

\RXꢀDQGꢀ7&/ꢂꢀꢀ)DLOLQJꢀVXFKꢀDJUHHPHQWꢁꢀWKHꢀDUELWUDWLRQꢀZLOOꢀEHꢀ

FRQGXFWHGꢀE\ꢀRQHꢀDUELWUDWRUꢀSXUVXDQWꢀWRꢀWKHꢀODZVꢀDQGꢀUXOHVꢀUHODWLQJꢀ

WRꢀDUELWUDWLRQꢀJHQHUDOO\ꢀLQꢀIRUFHꢀLQꢀWKHꢀMXULVGLFWLRQꢀLQꢀZKLFKꢀ\RXꢀUHVLGHꢀ

DWꢀWKHꢀWLPHꢀWKDWꢀWKHꢀ'LVSXWHꢀDULVHVꢂꢀꢀ7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀ

ODZꢁꢀQRꢀFODLPꢁꢀGLVSXWHꢁꢀFRQWURYHUV\ꢀRUꢀGLVDJUHHPHQWꢀRIꢀDQ\ꢀRWKHUꢀ

SHUVRQꢀPD\ꢀEHꢀMRLQHGꢀRUꢀFRPELQHGꢀZLWKꢀDQ\ꢀ'LVSXWHꢀE\ꢀ\RXꢁꢀZLWKRXWꢀ

WKHꢀSULRUꢀZULWWHQꢀFRQVHQWꢀRIꢀ7&/ꢂꢀꢀꢀ

ꢃꢈꢄꢀꢀꢀ7RꢀILQGꢀWKHꢀQHDUHVWꢀ$63ꢁ ꢀ Y LVLWꢀ7&/·VꢀZHEꢀVLWHꢀDWꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀZZZꢂWRVKLEDꢂFDꢁꢀRUꢀFDOOꢀWROOꢀIUHHꢀꢈꢉꢊꢋꢋꢉꢌꢍꢊꢉꢎꢏꢋꢏꢂꢀ

ꢃꢌꢄꢀꢀꢀ3UHVHQWꢀ\RXUꢀELOOꢀRIꢀVDOHꢀRUꢀRWKHUꢀSURRIꢀRIꢀSXUFKDVHꢀWRꢀWKHꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀ$63ꢂ ꢀ

)RUꢀDGGLWLRQDOꢀLQIRUPDWLRQꢁꢀYLVLWꢀ7&/ꢐVꢀZHEVLWHꢀDWꢀZZZꢂWRVKLEDꢂFD

&ULWLFDOꢁ$SSOLFDWLRQV

7KHꢀ'$9ꢀ3URGXFWꢀ\RXꢀKDYHꢀSXUFKDVHGꢀLVꢀQRWꢀGHVLJQHGꢀIRUꢀDQ\ꢀ´FULWLFDOꢀ

DSSOLFDWLRQVꢂµꢀ´&ULWLFDOꢀDSSOLFDWLRQVµꢀPHDQVꢀOLIHꢀVXSSRUWꢀV\VWHPVꢁꢀ

PHGLFDOꢀDSSOLFDWLRQVꢁꢀFRQQHFWLRQVꢀWRꢀLPSODQWHGꢀPHGLFDOꢀGHYLFHVꢁꢀ

FRPPHUFLDOꢀWUDQVSRUWDWLRQꢁꢀQXFOHDUꢀIDFLOLWLHVꢀRUꢀV\VWHPVꢀRUꢀDQ\ꢀRWKHUꢀ

DSSOLFDWLRQVꢀZKHUHꢀ'$9ꢀ3URGXFWꢀIDLOXUHꢀFRXOGꢀOHDGꢀWRꢀLQMXU\ꢀWRꢀSHUVRQV

ꢀ

RUꢀORVVꢀRIꢀOLIHꢀRUꢀFDWDVWURSKLFꢀSURSHUW\ꢀGDPDJHꢂ

,)ꢀ7+(ꢀ&86720(5ꢀ86(6ꢀ7+(ꢀ'$9ꢀ352'8&7ꢀ,1ꢀ$1<ꢀ&5,7,&$/ꢀ

$33/,&$7,21ꢁꢀ7+(ꢀ&86720(5ꢀ²ꢀ$1'ꢀ127ꢀ7&/ꢁꢀ,76ꢀ$)),/,$7(6ꢁꢀ

$'5Vꢀ25ꢀ$63Vꢀ²ꢀ$6680(ꢀ62/(ꢀ$1'ꢀ)8//ꢀ5(63216,%,/,7<ꢀ)25ꢀ

68&+ꢀ86(ꢂꢀꢀ7&/ꢀ5(6(59(6ꢀ7+(ꢀ5,*+7ꢀ72ꢀ5()86(ꢀ72ꢀ6(59,&(

$1<ꢀ'$9ꢀ352'8&7ꢀ86('ꢀ,1ꢀ$ꢀ&5,7,&$/ꢀ$33/,&$7,21ꢂꢀꢀ7&/ꢁꢀ,76ꢀ

$)),/,$7(6ꢁꢀ$'5Vꢀ$1'ꢀ$63Vꢀ+(5(%<ꢀ',6&/$,0ꢀ$1<ꢀ$1'ꢀ$//ꢀ

/,$%,/,7<ꢁꢀ'$0$*(6ꢀ$1'ꢀ&216(48(1&(6ꢀ$5,6,1*ꢀ287ꢀ2)ꢀ7+(ꢀ

6(59,&(ꢀ25ꢀ5()86$/ꢀ72ꢀ6(59,&(ꢀ68&+ꢀ'$9ꢀ352'8&7ꢀ$1'ꢀ

)857+(5ꢀ',6&/$,0ꢀ$1<ꢀ$1'ꢀ$//ꢀ/,$%,/,7<ꢁꢀ&216(48(1&(6ꢀ$1'ꢀ

'$0$*(6ꢀ7+$7ꢀ0$<ꢀ$5,6(ꢀ25ꢀ5(68/7ꢀ)520ꢀ7+(ꢀ86(ꢀ2)ꢀ7+(ꢀ

'$9ꢀ352'8&7ꢀ,1ꢀ$1<ꢀ&5,7,&$/ꢀ$33/,&$7,216ꢂ

EN 103

E7PCAUD_DR420KU_EN.indd 103

2/6/2009 10:56:08 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Taylor Blender BW11 User Manual
Toshiba Flat Panel Television WLT68 User Manual
Toshiba MP3 Player DMF82XKU User Manual
Tote Vision Computer Monitor LCD 1048HD User Manual
TP Link Security Camera tlsc3130g User Manual
Tripp Lite Mouse KP3040 User Manual
Tripp Lite Portable Generator 200502023 User Manual
Universal Remote Control Universal Remote MRF 260 User Manual
Verizon Speaker System SR F1B User Manual
Verizon Telephone NSQ412 User Manual