Toshiba DVD Player SD3815 User Manual

DVD PLAYER  
OWNER’S MANUAL  
MODEL : SD-3815  
Before connecting, operating or adjusting this product,  
please read this instruction booklet carefully and completely.  
1-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND  
INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE  
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR  
FUTURE REFERENCE.  
15. Attachments  
Only use attachments/accessories specified by the manufacturer.  
16. Accessories  
Use only with the cart, stand, tripod, bracket, or  
This set has been designed and manufactured to assure personal safety.  
Improper use can result in electric shock or fire hazard. The safeguards  
incorporated in this unit will protect you if you observe the following proce-  
dures for installation, use, and servicing.  
This unit does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE  
EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL ONLY.  
table specified by the manufacturer or sold with  
the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to  
avoid injury from tip-over.  
PORTABLE CART  
WARNING  
17. Disc Tray  
Keep your fingers well clear of the disc tray as it is closing. It can  
cause personal injury.  
18. Burden  
Do not place a heavy object on or step on the product. The object  
may fall, causing serious personal injury and serious damage to the  
product.  
1. Read These Instructions  
All safety and operating instructions should be read before the  
product is operated.  
19. Connecting  
2. Follow All Instructions  
All operating and use instructions should be followed.  
3. Keep These Instructions  
The safety and operating instructions should be retained for future  
reference.  
4. Heed All Warnings  
When you connect the product to other equipment, turn off the  
power and unplug all of the equipment from the wall outlet. Failure  
to do so may cause an electric shock and serious personal injury.  
Read the owner’s manual of the other equipment carefully and fol-  
low the instructions when making any connections.  
20. Sound Volume  
All warnings on the product and in the operating instructions should  
be adhered to.  
5. Power Sources  
Reduce the volume to the minimum level before you turn on the  
product. Otherwise, sudden high volume sound may cause hearing  
or speaker damage.  
This product should be operated only from the type of power  
source indicated on the marking label. If you are not sure of the  
type of power supply in your home, consult your product dealer or  
local power company. For products intended to operate from bat-  
tery power, or other sources, refer to the operating instructions.  
6. Grounding or Polarization  
21. Sound Distortion  
Do not allow the product to output distorted sound for a longtime. It  
may cause speaker overheating and fire.  
22. Earphone  
When you use the earphone, keep the volume at a moderate level.  
If you use the earphone continuously with high volume sound, it  
may cause hearing damage.  
Do not defeat the safety purpose of the polarized plug has two  
blades with one wider than the other. A grounding-type plug has  
two blades and a third grounding prong. The wide blade or the  
prong are provided for your safety. If the provided plug does not fit  
into your outlet, consult an electrician for replacement of the obso-  
lete outlet.  
23. Laser Beam  
Do not look into the opening of the disc tray or ventilation opening  
of the product to see the source of the laser beam. It may cause  
sight damage.  
24. Disc  
7. Ventilation  
Do not use a cracked, deformed, or repaired disc. These discs are  
easily broken and may cause serious personal injury and product  
malfunction.  
Slots and openings in the cabinet are provided for ventilation and to  
ensure reliable operation of the product and to protect it from over-  
heating. These openings must not be blocked or covered. The open-  
ings should never be blocked by placing the product on a bed, sofa,  
rug or other similar surface. This product should not be placed in a  
built-in installation such as a bookcase or rack unless proper ventila-  
tion is provided or the manufacturer’s instructions have been adhered  
to.  
25. Damage Requiring Service  
Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or moisture, does  
not operate normal, or has been dropped.  
8. Heat  
Do not install near any heat sources such as radiators, heat regis-  
ters, stoves, or other apparatus (including amplifiers) that produce  
heat.  
26. Servicing  
Do not attempt to service this product yourself as opening or  
removing the cover may expose you to dangerous voltage or other  
hazards. Refer all servicing to qualified service personnel.  
9. Water and Moisture  
Do not use this apparatus near water. For example: near a bath  
tub, wash bowl, kitchen sink, Laundry tub, in a wet basement; or  
near a swimming pool.  
27. Replacement parts  
10. Cleaning  
When replacement parts are required, be sure the service techni-  
cian has used replacement parts specified by the manufacturer or  
have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
Unplug this product from the wall outlet before cleaning. Do not use  
liquid cleaners or aerosol cleaners. Clean only with dry cloth.  
11. Power-Cord Protection  
Protect the power cord from being walked on or pinched particularly  
at plugs, convenience receptacles, and the point where they exit  
from the apparatus.  
28. Safety Check  
Upon completion of any service or repairs to this product, ask the  
service technician to perform safety checks to determine that the  
product is in proper operating condition.  
12. Overloading  
Do not overload wall outlets, extension cords, or integral conve-  
nience receptacles, this can result in a risk of fire or electric shock.  
13. Lightning  
Unplug this apparatus apparatus during lightning storms or when  
unused for long periods of time. This will prevent damage to the  
product due to lightning and power-line surges.  
14. Object and Liquid Entry  
Never push objects of any kind into this product through openings  
as they may touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid of any kind  
on the product.  
1-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Programmed Playback with Video CD  
and Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Programmed Playback with Video CD  
Introduction  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2  
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6  
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Front Panel and Display Window . . . . . . . . . . . . . . 7  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
and Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
z Repeat Programmed Tracks/All . . . . . . . . . . 20  
z Erasing a Track from Program List. . . . . . . . 20  
z Erasing the Complete Program List . . . . . . . 20  
Operation with MP3 Disc. . . . . . . . . . . . . . . . . . . . 21  
Playing an MP3 Disc . . . . . . . . . . . . . . . . . . . . . 21  
z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
z Moving to another Track . . . . . . . . . . . . . . . 21  
z Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 21  
Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 21  
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 22  
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 22  
z Moving to another File . . . . . . . . . . . . . . . . . 22  
z Repeat All/Off . . . . . . . . . . . . . . . . . . . . . . . 22  
Programmed Playback with MP3 or JPEG Disc . . 23  
Programmed Playback with MP3 or JPEG Disc . 23  
z Repeat Programmed Tracks/All/Off . . . . . . . 23  
z Repeat Programmed All/Off . . . . . . . . . . . . . 23  
z Erasing a Track/File from Program List. . . . . 23  
z Erasing the Complete Program List . . . . . . . 23  
Additional Information . . . . . . . . . . . . . . . . . . . . . 24  
Last Condition Memory . . . . . . . . . . . . . . . . . . . 24  
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 24  
Preparation  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11  
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting to Optional Equipment . . . . . . . . . . . 11  
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 12-15  
General Explanation. . . . . . . . . . . . . . . . . . . . . . 12  
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 12  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 13-15  
z Initial Settings General Operation. . . . . . . . . 13  
z Language . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
z Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
z Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
z Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
z Parental Control. . . . . . . . . . . . . . . . . . . . . . 15  
Reference  
Operation  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 26  
Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Operation with DVD, Video CD and Audio CD. 16-19  
Playing a DVD, Video CD and Audio CD . . . . . . 16  
z Exchanging discs during playback . . . . . . . . 16  
z Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 16  
z Exchanging the disc and starting playback. . 16  
General Features. . . . . . . . . . . . . . . . . . . . . . . . 17  
z Moving to another TITLE . . . . . . . . . . . . . . . 17  
z Moving to another CHAPTER/TRACK . . . . . 17  
z Still Picture and Frame-by-Frame Playback . 17  
z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
z Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 17  
z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
z Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
z Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 18  
z Time Search . . . . . . . . . . . . . . . . . . . . . . . . 18  
z Selecting the sound enhancement . . . . . . . 18  
z Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
z Marker Search. . . . . . . . . . . . . . . . . . . . . . . 19  
Special DVD Features . . . . . . . . . . . . . . . . . . . . 19  
z Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
z Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
z Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 19  
z Changing the Audio Language. . . . . . . . . . . 19  
z Changing the Audio Channel . . . . . . . . . . . . 19  
z Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Others  
LIMITED WARRANTY DVD VIDEO PLAYER. . . 29-30  
About the symbols for instructions  
Indicates hazards likely to cause harm to the unit  
itself or other material damage.  
Indicates special operating features of this unit.  
Indicates tips and hints for making the task easier.  
1-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
Disc-related terms  
Title (DVD only)  
Playable Discs  
The main film content or accompanying feature content  
or additional feature content, or music album.  
Each title is assigned a title reference number enabling  
you to locate it easily.  
DVD Video  
(8 cm / 12 cm disc)  
Video CD (VCD)  
(8 cm / 12 cm disc)  
Chapter (DVD only)  
Sections of a picture or a musical piece that are smaller  
than titles.  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit can play a DVD-R, CD-R or  
CD-RW that contains audio titles, MP3 or JPEG files.  
A title is composed of one or several chapters. Each  
chapter is assigned a chapter number, enabling you to  
locate the chapter you want. Chapter numbers may not  
be recorded on all discs.  
Notes  
– Depending on the conditions of the recording equip-  
ment or the CD-R/RW disc itself, some CD-R/RW  
discs cannot be played on this unit.  
– This unit cannot play CD-R/RW discs that do not con-  
tain any data, or contain different kinds of formatted  
data other than MP3 and CD-DA data.  
– Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
– Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal). It may result in malfunctions.  
Track (Video CD and audio CD only)  
Sections of a picture or a musical piece on a video CD  
or an audio CD. Each track is assigned a track number,  
enabling you to locate the track you want.  
Scene  
On a video CD with PBC (Playback control) functions,  
moving pictures and still pictures are divided into sec-  
tions called “Scenes”. Each scene is displayed in the  
menu screen and assigned a scene number, enabling  
you to locate the scene you want.  
A scene is composed of one or several tracks.  
Notes on DVDs and Video CDs  
Some playback operations of DVDs and Video CDs  
may be intentionally fixed by software manufacturers.  
As this unit plays DVDs and Video CDs according to  
disc content designed by the software manufacturer,  
some playback features of the unit may not be avail-  
able, or other functions may be added.  
Refer also to the instructions supplied with the DVDs  
and Video CDs. Some DVDs made for business pur-  
poses may not be playable on this unit.  
Types of video CDs  
There are two types of video CDs:  
Video CDs equipped with PBC (Version 2.0)  
PBC (Playback control) functions allow you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, still pictures  
of high resolution can be played if they are included in  
the disc.  
Regional code of the DVD player and DVDs  
This DVD player is designed and manufactured  
for playback of region “1” encoded DVD soft-  
ware. The region code on the labels of some DVD discs  
indicates which type of player can play those discs. This  
unit can play only DVD discs labeled “1” or “ALL”. If you  
try to play any other discs, the message “Check Regional  
Code” will appear on the TV screen. Some DVD discs  
may not have a region code label even though their  
playback is prohibited by area limits.  
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as audio CDs, these discs  
allow playback of video pictures as well as sound, but  
they are not equipped with PBC.  
1
Note on DTS-encoded CDs  
To avoid possible damage to the audio system, turn  
down the volume before playing back such discs. Adjust  
the volume gradually to personal preference. To enjoy  
DTS Digital SurroundTM playback, an external 5.1 chan-  
nel DTS Digital SurroundTM decoder system must be  
connected to the digital output of the player.  
1-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use (Contd)  
Precautions  
Storing discs  
After playing, store the disc in its case.  
Handling the unit  
Do not expose the disc to direct sunlight or sources of  
heat, or leave it in a parked car exposed to direct sun-  
light, as there may be a considerable temperature build-  
up inside the car.  
When shipping the unit  
The original shipping carton and packing materials  
come in handy. For maximum protection, re-pack the  
unit as it was originally packed at the factory.  
Cleaning discs  
When setting up the unit  
Fingerprints and dust on the disc can cause poor pic-  
ture quality and sound distortion. Before playing, clean  
the disc with a clean cloth. Wipe the disc from the cen-  
ter out.  
The picture and sound of a nearby TV, VCR, or radio  
may be distorted during playback. In this case, position  
the unit away from the TV, VCR, or radio, and turn off  
the unit after removing the disc.  
To keep the exterior surfaces clean  
Do not use volatile liquids, such as insecticide spray,  
near the unit. Do not allow rubber or plastic products to  
contact the unit for a long period of time. They will leave  
marks on the surface.  
To move the unit  
When you move the player, take out any discs. If you  
don’t, the discs may be damaged or drop into the inter-  
nal workings of the DVD player.  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
Cleaning the unit  
About Symbols  
To clean the cabinet  
Use a soft, dry cloth. If the surfaces are extremely dirty,  
use a soft cloth lightly moistened with a mild detergent  
solution. Do not use strong solvents, such as alcohol,  
benzine, or thinner, as these might damage the surface  
of the unit.  
About the  
symbol display  
” may appear on the TV screen during operation.  
This icon means the function explained in this owner’s  
manual is not available on that specific DVD video disc.  
To obtain a clear picture  
About the disc symbols for instructions  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or  
worn down, the picture quality will be poor.  
Regular inspection and maintenance are recommended  
after every 1,000 hours of use. (This depends on the  
operating environment.)  
When a section in this manual includes the following  
icons, the data provided herein is applicable only to the  
software represented by that icon.  
DVD DVD  
VCD2.0  
Video CDs with the PBC (playback control)  
function.  
For details, please contact your nearest dealer.  
VCD1.1  
Video CDs without the PBC (playback control)  
function.  
Notes on Discs  
CD  
Audio CDs.  
Handling discs  
MP3 MP3 disc.  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints will not  
get on the surface.  
JPEG JPEG disc.  
Do not stick paper or tape on the disc.  
1-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel and Display Window  
ON/STANDBY  
Switches the player ON and OFF.  
PLAY (  
Starts playback.  
)
OPEN/CLOSE (  
Opens or closes the disc tray.  
)
ON/STANDBY indicator  
Lights red when the player is in Standby mode (off).  
STOP (  
Stops playback.  
)
(left/right/up/down)  
Selects an item in the menu.  
PAUSE (  
)
Pauses playback temporarily /  
press repeatedly for frame-by-  
frame playback.  
ENTER  
Confirms menu selection.  
Disc Tray  
Insert a disc here.  
Display window  
Shows the current status of the player.  
Remote Sensor  
Point the DVD Player remote control here.  
MENU  
Reverse Skip (  
)
Accesses menu on a DVD disc.  
Returns to beginning of current  
chapter/track or to PREVIOUS  
chapter/track.  
Press and hold for two seconds  
for fast reverse search.  
RANDOM  
Plays tracks in random order.  
DISC CHANGE  
Changes a disc (other than the one playing)  
during playback  
Forward Skip (  
)
Advances to NEXT chapter/track.  
Press and hold for two seconds for  
fast forward search.  
DISC SKIP  
Moves to the next available disc tray.  
ANGLE Lights when multi angles  
TITLE Indicates current title number  
are present.  
CHP/TRK Indicates current chapter or track number  
Indicates total playing time/elapsed time  
PROG. Programmed playback active  
A light will appear if a disc is in the disc  
tray. The current disc tray flashes.  
DVD  
DVD inserted  
CD Audio CD inserted  
VCD Video CD inserted  
MP3 MP3 disc inserted  
RANDOM RANDOM play-  
back active  
Indicates repeat  
mode  
Indicates current player function:  
Playback, Pause, etc.  
MP3 VCD  
CD DVD  
TITLE  
CHP/TRK  
PROG.  
RANDOM ALL  
A
B
1
2
3
4
5
1-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
POWER  
OPEN/CLOSE (  
)
Switches DVD Player ON and OFF.  
Opens and closes the disc tray.  
ZOOM  
GUI DISPLAY  
Enlarges video image.  
Accesses on-screen display  
E.A.M.  
SETUP  
Selects sound mode during disc  
playback.  
Accesses or closes setup menu.  
TOP MENU  
Displays the Title menu of the disc if  
available.  
MENU  
Accesses menu on a DVD disc.  
ENTER  
Confirms menu selection.  
(left/right/up/down)  
Selects an item in the menu.  
RETURN  
CLEAR  
Removes a track number on the  
program menu or a mark on the  
MARKER SEARCH menu.  
- Removes the setup menu.  
- Displays the menu of a video CD  
with PBC.  
Reverse SCAN (  
Search backward.  
)
PAUSE/STEP (  
/
) •  
Pauses playback temporarily / press  
repeatedly for frame-by-frame  
playback.  
PLAY (  
Starts playback.  
)
Forward SCAN (  
)
STOP ( ) •  
Stops playback.  
Search forward.  
PROGRAM  
Accesses or removes Program  
menu.  
Forward SKIP (  
) •  
Advances to next chapter or track.  
Reverse SKIP ( ) •  
SEARCH  
Returns to beginning of current  
chapter or track or go to previous  
chapter or track.  
Displays MARKER SEARCH menu.  
0-9 number buttons  
Selects numbered items in a menu.  
ANGLE •  
Selects a DVD camera angle if  
available  
Reverse SLOW (  
)
Reverse slow playback.  
Forward SLOW (  
)
SUBTITLE •  
Selects a subtitle language.  
Forward slow playback.  
DISC SKIP  
Moves to the next available disc tray.  
AUDIO •  
Selects an audio language (DVD) or  
an audio channel (CD).  
RANDOM  
Plays tracks in random order.  
FL DIM •  
Controls the Display Window’s light.  
MARKER  
Marks any point during playback.  
REPEAT  
Repeat chapter, track, title, all.  
A-B RPT  
Repeat sequence.  
Remote Control Operation Range  
Remote control battery installation  
Point the remote control at the remote sensor and press  
the buttons.  
Detach the battery cover on the rear of  
the remote control, and insert two R03  
z Distance: About 23 ft (7 m) from the front of the  
remote sensor  
(size AAA) batteries with  
aligned correctly.  
and  
z Angle: About 30° in each direction of the front of the  
remote sensor  
Caution  
Do not mix old and new batteries. Never mix different  
types of batteries (standard, alkaline, etc.).  
1-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
OPTICAL (Digital audio out jack)  
Connect to digital (optical) audio equipment.  
COAXIAL (Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
ANALOG AUDIO OUT (Left/Right) 1, 2  
Connect to an amplifier, receiver or stereo system.  
AC Power Cord  
Plug into the power source.  
VIDEO OUT  
Connect to a TV with video inputs.  
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)  
Connect to a TV with Y Pb Pr inputs.  
S-VIDEO OUT  
Connect to a TV with S-Video inputs.  
VIDEO OUTPUT Switch  
Select either S-VIDEO or COMPONENT/PROGRESSIVE SCAN,  
depending on how you connect DVD Player to the TV.  
Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause permanent  
damage to the unit.  
1-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
®
Progressive Scan (ColorStream pro) connection  
Tips  
z If your television is a high-definition or “digital ready”  
television, you may take advantage of the DVD  
Player’s progressive scan output for the highest  
video resolution possible.  
z If your TV does not accept the Progressive Scan for-  
mat, the picture will appear scrambled if you select  
Progressive Scan output from the DVD Player.  
z Depending on your TV and other equipment you wish  
to connect, there are various ways you could connect  
the player. Use only one of the connections  
described below.  
z Please refer to the manuals of your TV, VCR, Stereo  
System or other devices as necessary to make the  
best connections.  
z For better sound reproduction, connect the player’s  
AUDIO OUT jacks to the audio in jacks of your  
amplifier, receiver, stereo or audio/video equipment.  
See “Connecting to optional equipment” on page 11.  
Connect the COMPONENT VIDEO OUT/  
PROGRESSIVE SCAN jacks on the DVD Player to  
the corresponding in jacks on the TV using an  
optional Y Pb Pr cable (C).  
1
Connect the Left and Right AUDIO OUT jacks of  
2 the DVD Player to the audio left/right in jacks on the  
TV (A) using the supplied audio cables.  
Caution  
Make sure the DVD Player is connected directly to the  
TV. Select the TV to the corresponding video input.  
– Do not connect the DVD Player’s AUDIO OUT jack to  
the phono in jack (Turntable) of your audio system.  
– Do not connect your DVD Player via your VCR. The  
DVD image could be distorted by the copy protection  
system.  
Notes  
– Set the Progressive to “On” from the setup menu, see  
page 13.  
– Progressive scan does not function simultaneously  
with the analog video connections (yellow VIDEO  
OUT jack).  
Connecting to a TV  
z Make one of the following connections, depending on  
the capabilities of your existing equipment.  
z When using the COMPONENT VIDEO OUT/  
PROGRESSIVE SCAN jacks, set the VIDEO  
OUTPUT switch to COMPONENT/PROGRESSIVE.  
When using the S-VIDEO OUT jack, set the VIDEO  
OUTPUT switch to S-VIDEO.  
Rear of TV  
S-VIDEO  
INPUT  
COMPONENT VIDEO /  
VIDEO  
INPUT  
AUDIO INPUT  
PROGRESSIVE SCAN INPUT  
Y
Pr  
Pb  
R
L
L
Video connection (Good)  
Connect the VIDEO OUT jack on the DVD Player to  
1
the video in jack on the TV using the video cable  
supplied (V).  
S
C
A
V
Connect the Left and Right AUDIO OUT jacks of  
2 the DVD Player to the audio left/right in jacks on the  
TV (A) using the supplied audio cables.  
S-Video connection (Better)  
Connect the S-VIDEO OUT jack on the DVD Player  
1
to the S-Video in jack on the TV using an optional  
S-Video cable (S).  
Connect the Left and Right AUDIO OUT jacks of  
2 the DVD Player to the audio left/right in jacks on the  
TV (A) using the supplied audio cables.  
®
Component Video (Color Stream ) connection (Best)  
Rear of DVD player  
Note  
Connect the COMPONENT VIDEO OUT/  
1
PROGRESSIVE SCAN jacks on the DVD Player to  
the corresponding in jacks on the TV using an  
optional Y Pb Pr cable (C).  
Connect the Left and Right AUDIO OUT jacks of  
2 the DVD Player to the audio left/right in jacks on the  
TV (A) using the supplied audio cables.  
If the TV has an S-video input, connect the DVD player  
with the S-video cable. When using an S-video cable,  
do not connect the yellow video cable.  
1-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (Contd)  
Rear of DVD player  
Connecting to Optional Equipment  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Surround  
Connect the Left and Right AUDIO OUT jacks on the  
DVD Player to the audio left and right in jacks on your  
amplifier, receiver or stereo system, using the supplied  
audio cables (A).  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/  
Video receiver equipped with a multi-channel  
decoder (Dolby Digital, MPEG 2 or DTS)  
O
X
A
Connect one of the DVD Player’s DIGITAL AUDIO  
1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-  
responding in jack on your amplifier. Use an option-  
al digital (optical O or coaxial X) audio cable.  
R
L
OPTICAL  
COAXIAL  
You will need to activate the player’s digital output.  
DIGITAL INPUT  
AUDIO INPUT  
2 (See “Digital Audio Output” on page 14).  
Amplifier (Receiver)  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your DVD Player (MPEG 2,  
Dolby Digital and DTS). Check the receiver manual and  
the logos on the front of the receiver.  
Note  
This player does not perform internal (2 channel)  
decoding of a DTS sound track. To enjoy DTS  
multi channel surround, you must connect this player to  
a DTS compatible receiver via one of this player’s  
digital audio outputs.  
Notes  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will  
produce a strong, distorted sound or no sound at all.  
– Six Channel Digital Surround Sound can only be  
obtained if your receiver is equipped with a Digital  
Multi-channel surround sound decoder.  
To confirm the audio format of the current DVD  
selection display, press AUDIO.  
– Repeated pressing of the AUDIO button may allow  
you to select between various audio formats available  
on the disc.  
1-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation  
Repeat mode Icons  
General Explanation  
This manual gives basic instructions for operating the  
DVD Player. Some DVDs require specific operation or  
allow only limited operation during playback. When this  
TITLE  
Repeat Title  
CHAPT  
Repeat Chapter  
TRACK  
Repeat Track (non-PBC Video CDs  
occurs, the symbol  
appears on the TV screen, indi-  
and Audio CD only)  
cating that the operation is not permitted by the DVD  
Player or is not available on the disc.  
DISC  
ALL  
Repeat Current Disc (non-PBC Video CDs  
and Audio CD only)  
On-Screen Display  
General playback status can be displayed on the TV  
Repeat All Discs (non-PBC Video CDs  
and Audio CD only)  
A
B
Repeat A-B  
screen. Some items can be changed on the menu.  
OFF  
Repeat Off  
On-screen display operation  
Resume play from this point  
Action prohibited or not available  
Press GUI DISPLAY during playback.  
1
Press or to select an item.  
Notes  
2 The selected item will be highlighted.  
z Some discs may not provide all of the features includ-  
ed on the on-screen display example shown below.  
z If no button is pressed for 10 seconds, the on-screen  
display disappears.  
Press or to change the setting of an item.  
3 The number buttons can be also be used for setting  
numbers (e.g., title number). For some functions,  
press ENTER to execute the setting.  
DVD  
Items  
Function (Press  
/
to select desired item)  
Selection Method  
Title Number  
Displays the current title number and total number of  
/
, or  
1/3  
1/12  
available titles, and skips to a desired title number.  
Numbers, ENTER  
Chapter Number  
Time search  
Displays the current chapter number and total number of  
available chapters, and skips to a desired chapter number.  
/
, or  
Numbers, ENTER  
Displays the elapsed playing time, and  
searches a point identified by its elapsed time.  
Numbers, ENTER  
0:16:57  
Audio language  
and Digital Audio  
Output mode  
Displays the current audio soundtrack language,  
encoding method and channel number, and  
any changes you make to the setting.  
1
ENG  
D
6 CH  
/
Subtitle language  
Displays the current subtitles language, and  
OFF  
1/1  
/
/
any changes you make to the setting.  
Angle  
Displays the current angle number and total number of  
angles, and any changes you make to the angle number.  
Sound  
Displays the current sound mode, and  
any changes you make to the setting.  
NORM.  
/
VCD1.1  
VCD2.0  
CD  
Items  
Function (Press  
/
to select desired item)  
Selection Method  
Track Number  
Displays the current track number, total number of tracks  
and PBC On mode, and skips to the desired track number.  
/
, or  
1/4  
Numbers, ENTER  
Time  
Displays the elapsed playing time (Display only)  
0:16:57  
Audio Channel  
Sound  
Displays the audio channel, and  
STER.  
/
/
changes you make to the audio channel.  
Displays the current sound mode, and  
any changes you make to the setting.  
NORM.  
1-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Contd)  
Picture  
Initial Settings  
TV Aspect DVD  
You can install your own Personal Preferences.  
4:3 Letterbox: Select when a standard 4:3 TV is con-  
nected. Displays theatrical images with masking bars  
above and below the picture.  
4:3 Panscan: Select when a standard 4:3 TV is con-  
nected. Displays pictures cropped to fill your TV screen.  
Both side of the original picture may be cut off.  
16:9 Wide: Select when a 16:9 wide TV is connected.  
Initial Settings General Operation  
Press SETUP.  
The setup menu appears.  
1
Original  
English  
Disc Audio  
Disc Subtitle  
Disc Menu  
French  
Rating  
German  
Spanish  
Italian  
4:3 Letterbox  
4:3 Panscan  
16:9 Wide  
Disc Audio  
Area Code  
Disc Subtitle  
Disc Menu  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
Chinese  
Polish  
Rating  
Area Code  
Hungarian  
Russian  
Other — — — —  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
Others  
Press  
/
to select the desired item.  
Others  
2 The screen will display the current setting for the  
selected item, as well as alternate setting(s).  
While the desired item is displayed, press  
,
Progressive Scan DVD  
Progressive Scan Video provides the highest resolution  
pictures with less flicker and line structure.  
If you are using the COMPONENT VIDEO OUT/  
PROGRESSIVE SCAN jacks, but are connecting the  
DVD Player to a standard (analog) television, set  
Progressive Scan to Off.  
If you are using the Component Video jacks for  
connection to a TV or monitor that is compatible with a  
progressive scan signal, set Progressive Scan to On.  
3 then  
/
to select the desired setting.  
Press ENTER to confirm your selection.  
4 Some items require additional steps.  
Press SETUP, RETURN or PLAY to exit the  
5 setup menu.  
If you press SETUP or RETURN to exit the setup  
menu, DVD Player will be in stop mode. So, you  
must press PLAY to play back.  
Language  
Off  
On  
Disc Audio  
Disc Subtitle  
Disc Menu  
Disc Language DVD  
Rating  
Select a language for the discs Menu, Audio and Subtitle.  
Original : The original language included on the disc is selected.  
Other : To select another language, enter the 4-digit number  
corresponding to the language code list on page 26. If you  
enter the wrong language code, press CLEAR.  
Area Code  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
Others  
Original  
English  
Disc Audio  
Disc Subtitle  
Disc Menu  
French  
Rating  
German  
Spanish  
Italian  
Notes  
Area Code  
TV Aspect  
Progressive Scan is available only when the VIDEO  
OUTPUT switch on the rear panel is set to COMPO-  
NENT/PROGRESSIVE SCAN.  
Menu Language  
Progressive Scan  
Digital Audio Output  
5
Chinese  
Polish  
Hungarian  
Russian  
Other — — — —  
Others  
Caution  
Once the setting for progressive scan output is entered, an  
image will only be visible on a progressive scan compatible  
TV or monitor. If you set Progressive Scan to On in error,  
you must reset the unit. Pointing the remote at the player,  
press the STOP key to stop any disc that is playing. Next,  
press the STOP key again and hold it for five seconds  
before releasing it. The video output will be restored to the  
standard setting, and a picture will once again be visible on  
a conventional analog TV or monitor.  
Menu Language  
Select a language for the setup menu. This is the menu  
you see when you press SETUP.  
English  
Spanish  
French  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Area Code  
TV Aspect  
Menu Language  
1-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Contd)  
Dynamic Range Control (DRC)  
Sound  
With the DVD format, you can hear a programs sound-  
track in the most accurate and realistic presentation  
possible, thanks to digital audio technology. However,  
you may wish to compress the dynamic range of the  
audio output (the difference between the loudest sounds  
and the quietest ones). Then, you may listen to a movie  
at a lower volume without losing clarity of sound. Set  
DRC to On for this effect.  
Digital Audio Output  
Each DVD disc may have a variety of audio output  
options. Set the players Digital Audio Output according  
to the type of audio system you use.  
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM”  
if you connect the DVD Players DIGITAL OUT jack to a  
Dolby Digital decoder (or an amplifier or other equip-  
ment with a Dolby Digital decoder).  
Stream/PCM: Select Stream/PCMif you connect the  
DVD Players DIGITAL OUT jack to an amplifier or other  
equipment with a DTS decoder, Dolby Digital decoder  
or MPEG decoder.  
PCM: Select when connected to a 2 channel digital  
stereo amplifier. The DVD player outputs sounds in the  
PCM 2ch format when you play a DVD video disc  
recorded on the Dolby Digital, MPEG1 or MPEG2  
recording system.  
Vocal  
Set Vocal to On only when a multi-channel karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into normal stereo sound.  
PBC  
Set Playback Control (PBC) to On or Off.  
On: Video CDs with PBC are played according to the PBC.  
Off: Video CDs with PBC are played the same way as Audio  
CDs.  
DOLBY  
DIGITAL /PCM  
Stream/PCM  
PCM  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
B.L.E. (Black Level Expansion)  
Area Code  
Sample Freq.  
48 KHz  
TV Aspect  
To select the black level of playback pictures. Set your  
preference and monitors ability.  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
Menu Language  
Progressive Scan  
Digital Audio Output  
96KHz  
Others  
Pluge (Blacker than Black)  
Sample Frequency  
For proper adjustment of your television brightness  
settings utilizing a commercially available test disc.  
On: Select when you adjust the level of your TV using a  
commercially available test disc that contains pluge  
signals.  
To change the Sample Frequency setting, first select  
the desired Digital Audio Output as indicated above.  
If your receiver or amplifier is NOT capable of handling  
96KHz signals, select 48KHz. When this choice is  
made, this unit will automatically convert any 96KHz  
signals to 48KHz so your system can decode them.  
If your receiver or amplifier is capable of handling  
96KHz signals, select 96KHz. When this choice is  
made, this unit will pass all signals through without  
down conversion, or processing.  
Off: For normal use.  
DNR (Digital Noise Reduction)  
You can reduce ambient noise in the picture.  
DNR1: Normal level  
DNR2: Expanded level.  
Off:  
Off.  
Others  
The DRC, Vocal, PBC, B.L.E., Pluge and DNR settings  
can be changed.  
Notes  
Actual picture enhancement may vary depending on the  
quality of the disc.  
z Press  
/
to select the desired item and press  
ENTER. The setting of the selected item alternates  
between On and Off.  
While the DNR2 (expanded level) can provide additional  
improvement in the reduction of noise in the video signal, it  
may produce undesirable picture artifacts on some discs.  
Should this occur, select a more appropriate DNR level (nor-  
mal or off).  
Depending on the disc, some picture detail may be lost by  
the picture enhancement.  
A DVD audio disc with Dolby Digital or DTS soundtrack may  
be played, some DVD audio discs include moving pictures  
which may be modified by the above processes.  
DRC On  
Vocal On  
PBC On  
B.L.E. Off  
Pluge Off  
DNR Off  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Area Code  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
Others  
1-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Contd)  
Parental Control  
DVD  
Area Code  
Enter the code of a country/area whose standards were  
used to rate the DVD video disc, referring to the list  
(See Area Code List, page 27.).  
Rating DVD  
Movies on DVDs may contain scenes not suitable for  
children. Therefore, discs may contain Parental Control  
information that applies to the complete disc or to  
certain scenes on the disc. These scenes are rated  
from 1 to 8, and alternatively, more suitable scenes are  
available for selection on some discs. Ratings are  
country-dependent. The Parental Control feature allows  
you to prevent discs from being played by your children  
or to have certain discs played with alternative scenes.  
Code Set  
Disc Audio  
Disc Subtitle  
Disc Menu  
U
S
Rating  
Area Code  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
Others  
8
Disc Audio  
Disc Subtitle  
Disc Menu  
7
6
Select Area Code using the  
setup menu.  
/
buttons on the  
Rating  
5
1
Area Code  
4
TV Aspect  
3
While Area Code is selected, press  
Follow step 3 of Ratingon left.  
Select the first character using the  
.
Menu Language  
Progressive Scan  
Digital Audio Output  
2
2
3
4
1
Unlock  
Change  
Others  
/
buttons.  
Select Ratingon the Setup menu using the  
and buttons.  
1
2
Shift the cursor using  
/
buttons and select  
5 the second character using  
While Ratingis displayed, press  
.
/
buttons.  
Press ENTER to confirm your area code selec-  
6 tion, then press SETUP to exit the menu.  
When you have not entered a password yet;  
3 Install a 4-digit password using the number buttons  
to create a personal 4-digit security password, then  
press ENTER. Enter the 4-digit password again and  
press ENTER to verify.  
Note  
Confirmation of your 4-digit password is necessary  
when the password is changed (see Changing the  
4-digit passwordbelow ).  
When you have already entered a password;  
Install your 4-digit password using the number  
buttons to confirm the personal 4-digit security  
password, then press ENTER.  
Changing the 4-digit password  
1 Follow Steps 1-2 as shown above to the left (Rating).  
2 Install your old code, then press ENTER.  
If you make a mistake before pressing ENTER, press  
CLEAR and install your 4-digit security password again.  
3 Select Change using the  
/
buttons then press  
ENTER.  
Select a rating from 1 to 8 using the  
/
but-  
4 Install the new 4-digit password, then press ENTER.  
5 Install exactly the same code a second time and veri-  
fy by pressing ENTER.  
4 tons. One (1) has the least playback restrictions.  
Eight (8) has the most playback restrictions.  
Unlock: If you select Unlock, Parental Control is  
not active. The disc will play without restrictions.  
Ratings 1 to 8: Some discs contain scenes not  
suitable for children. If you set a rating for the play-  
er, all disc scenes with the same rating or lower will  
be played. Higher rated scenes will not be played  
unless an alternative scene is available on the disc.  
The alternative must have the same rating or a  
lower one. If no suitable alternative is found,  
playback will stop. You must enter your 4-digit  
password or change the rating level in order to play  
the disc.  
6 Press SETUP to exit the menu.  
If you forget your 4-digit password  
If you forget your password, to clear the current pass-  
word, follow the procedure below.  
1 Press SETUP to display the setup menu.  
2 Use the Number buttons to enter the 6-digit number  
210499.”  
The 4-digit password is cleared.  
3 Enter a new code as shown above to the left (Rating).  
Press ENTER to confirm your rating selection,  
5 then press SETUP to exit the menu.  
1-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD, Video CD and Audio CD  
Exchanging discs during playback  
Playing a DVD, Video CD and Audio CD  
z Press DISC CHANGE on the front panel during play-  
back to open the disc tray.  
VCD2.0  
VCD1.1  
Playback Setup  
DVD  
CD  
z Press DISC SKIP to rotate the disc trays to the  
desired position. The carousel will rotate clockwise by  
one disc increments.  
z Exchange the discs and press DISC CHANGE or  
OPEN/CLOSE to close the disc tray.  
z Turn on the TV and select the video input source  
corresponding to the DVD player.  
z Audio system: Turn on the audio system and select  
the input source connected to the DVD player.  
Press OPEN/CLOSE to open the disc tray.  
Note  
1
The disc tray presently loaded in the play position can  
not be exchanged.  
Load your disc in the center position, with the  
2 label facing up.  
Do not load a disc in the  
left and light side position.  
Skipping discs  
Press DISC SKIP during play or when playback is  
stopped.  
Center position  
Notes  
When a double-sided DVD is inserted, make sure  
the side you want to play is facing up.  
Discs can be loaded one at a time by pressing  
DISC SKIP to rotate the carousel.  
When DISC SKIP is pressed, the disc tray rotates and  
playback begins from the beginning of the next disc.  
If there is no disc on the next disc tray, the following  
disc tray will be selected.  
Press OPEN/CLOSE to close the tray.  
3 READING appears on the TV screen, and playback  
starts automatically. If playback does not start,  
press PLAY.  
When DISC SKIP is pressed during playback of disc  
5, playback of disc 1 will start.  
Exchanging the disc and starting playback  
In some cases, the disc menu may appear instead.  
1.Press OPEN/CLOSE during playback or when play-  
back is stopped.  
Play stops (if pressed during playback), the disc tray opens  
and the disc that was in the play position comes to the front.  
2.Exchange the disc.  
3.Press OPEN/CLOSE or PLAY again.  
The tray closes and playback begins (with the disc  
that was in front).  
If a disc menu screen is displayed  
The menu screen may be displayed first after loading a  
DVD or Video CD that contains a menu.  
DVD  
Use the  
buttons to select the title/chapter  
and additional selections you want, then press ENTER  
to start playback.  
Press TOP MENU or MENU to return to the disc menu  
screen.  
VCD2.0  
z Use the number buttons to select the track you want  
to view.  
Press RETURN to return to the disc menu screen.  
z Menu setting and the exact operating procedures for  
using the disc menu may differ depending on the disc.  
Follow the instructions on each menu screen.  
You also may set PBC to Off under setup. See page  
14.  
Notes  
If Parental Control is set and the disc is not within the  
Rating settings (not authorized), the 4-digit password  
must be entered and/or the disc must be authorized  
(see Parental Control, on page 15).  
DVDs may have a region code.  
Your player will not play discs that have a region code  
different from your player. The region code for this  
player is 1 (one).  
1-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD, Video CD and Audio CD (Contd)  
VCD2.0  
VCD1.1  
Slow Motion DVD  
General Features  
1 Press SLOW  
or  
during playback.  
The player will enter SLOW mode.  
Note  
2 Use the SLOW  
1/16, 1/8,  
1/16, 1/8,  
or  
1/4 or  
1/4 or  
to select the required speed:  
1/2 (reverse), or  
1/2 (forward).  
Unless stated otherwise, all operations described use  
the remote control. Some features may also be  
available from the Setup menu.  
3 To exit slow motion mode, press PLAY.  
1/3  
Moving to another TITLE DVD  
Note  
Slow motion playback in reverse is not available from a  
Video CD.  
When a disc has more than one title, you can select to  
another title as follows:  
z Press GUI DISPLAY when playback is stopped.  
From the title function, press the appropriate num-  
bered button (0-9) to select a title number.  
VCD2.0  
VCD1.1  
Search DVD  
1 Press REV  
CD  
or FWD  
during playback.  
The player will now go into SEARCH mode.  
Moving to another CHAPTER/TRACK  
2 Press REV  
required speed:  
(backward) or  
(forward).  
or FWD  
X2,  
X2,  
repeatedly to select the  
X4, X16, X100  
X4, X16, X100  
1/12  
1/3  
VCD1.1  
DVD  
CD  
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to another  
chapter/track as follows:  
With a Video CD and Audio CD, the Search speed  
changes:  
X2,  
X2,  
X4,  
X4,  
X8 (forward).  
X8 (backward) or  
z Press SKIP  
or  
briefly during playback to  
3 To exit SEARCH mode, press PLAY.  
select the next chapter/track or to return to the begin-  
ning of the current chapter/track.  
VCD1.1  
Random Karaoke DVD  
CD  
z Press  
chapter/track.  
z To go directly to any chapter during DVD playback,  
press GUI DISPLAY. Then, press to select C  
twice briefly to step back to the previous  
1 Press RANDOM during playback or in stop mode.  
The unit automatically begins Random Playback and  
RANDOM (1-3)appears on the TV screen.  
/
(chapter) (or for a Video CD and Audio CD, select T  
for track). Then, enter the chapter/track number using  
the numbered buttons (0-9).  
RANDOM1: Plays all the tracks on a single disc in random  
order and then stops.  
RANDOM2: Plays all the tracks on current disc in  
random order and then plays all the tracks on each suc-  
ceeding disc in random order and then stops.  
RANDOM3: Plays 2 tracks randomly from a disc and then  
plays 2 tracks randomly from a different disc until all  
tracks on all discs have been played.  
Note  
For two-digit numbers, press the buttons in rapid  
succession.  
2 To return to normal playback, press RANDOM until  
RANDOMdisappears on the display window.  
Still Picture and Frame-by-frame playback  
DVD  
VCD2.0  
VCD1.1  
1 Press PAUSE/STEP during playback.  
The player will now go into PAUSE mode.  
2 You can advance the picture frame by frame by  
pressing PAUSE/STEP repeatedly on the remote  
control.  
Tip  
By pressing SKIP  
back, the unit selects another title (track) and resumes  
Random playback.  
or  
during Random play-  
Note  
CD  
Pause  
This function works only with Compact Discs, Karaoke  
discs and video CD without PBC.  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY or press  
PAUSE/STEP again.  
1-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD, Video CD and Audio CD (Contd)  
General Features (contd)  
0:16:57  
- : - - : - -  
Time Search DVD  
VCD2.0  
VCD1.1  
Repeat DVD  
CD  
The Time Search function allows you to start playing at  
any elapsed time location on the disc.  
DISC  
ALL  
TRACK  
OFF  
CHAPT  
TITLE  
1 Press GUI DISPLAY during playback. The on-screen  
DVD Video Discs - Repeat Chapter/Title/Off  
display appears on the screen.  
The Time Search box shows the elapsed playing time of the  
current disc.  
1
To repeat the chapter currently playing, press REPEAT.  
The Repeat Chapter icon appears on the TV screen.  
2 Within 10 seconds, press  
Search icon in the on-screen display.  
The -:--:--appears in the Time Search box.  
/
to select the Time  
2 To repeat the title currently playing, press REPEAT  
two times.  
The Repeat Title icon appears on the TV screen.  
3 Within 10 seconds, use the number buttons to enter  
the required start time. Enter hours, minutes and sec-  
onds from left to right in the box.  
3
To cancel Repeat mode, press REPEAT repeatedly until  
the Repeat Off icon appears on the TV screen.  
If you enter the wrong numbers, press CLEAR to remove the  
numbers you entered. Then enter the correct numbers.  
Video CDs and Audio CDs - Repeat Track/Disc/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the TV screen.  
4
Within 10 seconds, press ENTER to confirm the start time.  
Playback starts from the selected time on the disc. If you enter  
an invalid time, playback will continue from the current point.  
2 To repeat the disc currently playing, press REPEAT  
two times.  
The Repeat Disc icon appears on the TV screen.  
Selecting the sound enhancement  
3 To Repeat of entire all disc contents, press REPEAT  
three times.  
The Repeat All icon appears on the TV screen.  
3D SUR  
DIALOGUE  
NORM.  
DVD  
VCD  
CD  
Press E.A.M. to select the sound enhancement during  
playback.  
4
To cancel Repeat mode, press REPEAT repeatedly until  
the Repeat Off icon appears on the TV screen.  
NORM. : Normal sound  
3D SUR: This player can produce a 3D Surround effect, which  
simulates multi-channel audio playback from two conventional  
stereo speakers, instead of the five or more speakers normally  
required to listen to multi-channel audio from a home theater  
system.  
DIALOGUE: Enhances critical center channel information to  
make dialogue more intelligible (only when playing a DVD  
video disc recorded on the Dolby Digital recording system).  
To use this enhancement on audio output from the  
DIGITAL AUDIO OUT jack, be sure to set Digital Audio  
Outputto PCM. See page 14.  
Note  
z On a Video CD with PBC, you must set PBC to Off on  
the setup menu to use the Repeat function.  
See page 14.  
z If you press SKIP  
Repeat Chapter/Track playback, the repeat playback  
twice or SKIP  
during  
cancels.  
VCD2.0  
VCD1.1  
Repeat A-B DVD  
CD  
A
*
A
B
OFF  
VCD2.0  
VCD1.1  
Zoom DVD  
To repeat a sequence in a title:  
The Zoom function allows you to expand the video  
image and to move the focus point of zoomed image.  
1 Press A-B RPT at your chosen starting point.  
A- appears briefly on the TV screen.  
1 Press ZOOM during playback or still playback to acti-  
vate the Zoom function.  
2 Press A-B RPT again at your chosen end point.  
A-B appears briefly on the TV screen, and the repeat sequence  
begins (a-b repeat appears on the players display).  
If you press ZOOM repeatedly, the magnification level  
increases up to six times.  
3 To cancel the sequence, press A-B RPT.  
2 Use the / / / buttons to move the focus point off  
the zoomed image.  
3 Press CLEAR to resume normal playback or return to  
the paused image.  
Note  
If you press SKIP  
or  
during repeat A-B,  
the A-B sequence are cleared.  
Notes  
z The zoom function may not work for some DVDs.  
z The zoom function may not work on multi-angle  
scenes.  
1-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD, Video CD and Audio CD (Contd)  
General Features (contd) Special DVD Features  
DVD  
VCD2.0  
VCD1.1  
DVD  
CD  
Marker Search  
Checking the contents of DVD Video  
discs: Menus  
MARKER SEARCH  
1/9  
DVDs may contain menus that allow you to access spe-  
cial features. To access the disc menu, press MENU.  
Then, press the appropriate number button to select an  
option. Or, use the / / / buttons to highlight your  
selection, then press ENTER.  
You can start playback from a memorized point. Up to  
nine points can be memorized.  
To enter a mark, follow these steps.  
1 During disc playback, press MARKER at the location  
you want to memorize.  
The Marker icon will appear on the TV screen briefly.  
DVD  
Title Menu  
2
Repeat step 1 to enter up to nine Marker points on a disc.  
1 Press TOP MENU.  
To Recall a Marked Scene  
If the current title has a menu, that menu will appear on the  
screen. Otherwise, the disc menu may appear.  
1 During disc playback, press SEARCH.  
The MARKER SEARCH menu will appear on the screen.  
2 The menu can list camera angles, spoken language  
and subtitle options, and chapters for the title.  
2 Within 10 seconds, press  
/
to select a Marker num-  
3 To remove the title menu, press TOP MENU again.  
ber that you want to recall.  
3 Press ENTER.  
Playback will start from the Marked scene.  
DVD  
Disc Menu  
4 To remove the MARKER SEARCH menu, press  
SEARCH.  
1 Press MENU.  
The disc menu is displayed.  
2 To exit the disc menu, press MENU again.  
To clear a Marked Scene  
1 During disc playback, press SEARCH.  
1/1  
DVD  
The MARKER SEARCH menu will appear on the screen.  
Camera Angle  
2 Press  
/
to select the Marker number that you want  
If the disc contains scenes recorded at different camera  
angles, you can change to a different camera angle  
during playback.  
z Press ANGLE repeatedly during playback to select a  
desired angle.  
to erase.  
3 Press CLEAR.  
The Marker number will be erased from the list.  
4 Repeat steps 2 and 3 to erase additional Marker  
numbers.  
The number of the current angle appears on the display.  
5
To remove the MARKER SEARCH menu, press SEARCH.  
DVD  
Changing the Audio Language  
Note  
1
ENG  
D
All disc markers are cleared when the power is turned  
off, the disc is removed, or DISC SKIP button is  
pressed.  
6
CH  
Press AUDIO repeatedly during playback to hear different  
audio languages or audio tracks available on the disc.  
Changing the Audio Channel  
RIGHT  
STER.  
LEFT  
VCD  
CD  
Press AUDIO repeatedly during playback to hear a dif-  
ferent audio channel (STEREO, LEFT or RIGHT).  
1
ENG  
DVD  
Subtitles  
Press SUBTITLE repeatedly during playback to view  
the different subtitle languages available on the disc.  
Note  
If  
appears, the feature is not available on the disc.  
1-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmed Playback with Video CD and Audio CD  
Programmed Playback with Video CD  
and Audio CD  
Repeat Programmed Tracks/All  
1 To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the TV screen.  
Note  
2 To repeat all tracks on the program list, press  
REPEAT two times.  
The Repeat All icon appears on the TV screen.  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the Program function. See page 14.  
3
To cancel Repeat mode, press REPEAT repeatedly until  
the Repeat Off icon appears on the TV screen.  
Insert a Video CD or Audio CD and close the  
tray.  
1
2
Note  
If you press SKIP  
Repeat Track playback, the repeat playback cancels.  
Press PROGRAM while playback is stopped.  
twice or SKIP  
during  
The Program menu will appear.  
Program  
Step  
1
1
To resume normal playback from programmed  
playback  
Press PROGRAM until PROG.indicator disappears in  
the display window.  
Clear All  
Erasing a Track from Program List  
1 Press PROGRAM while playback is stopped.  
The Program menu will appear.  
2 Use / / / to select the track that you wish to erase  
from the Program list.  
Note  
Press PROGRAM or RETURN to exit the Program  
menu.  
Enter the disc number using the numerical keys  
3 Press CLEAR.  
The track will be erased from the Program list.  
3 (1-5) and then press ENTER.  
Enter the track number using the numerical  
4 keys (0-9) and then press ENTER.  
The next area is selected.  
Erasing the Complete Program List  
1 Press PROGRAM while playback is stopped.  
The Program menu will appear.  
2 Use / / / to select Clear All, then press ENTER.  
The complete Program for the disc will be erased.  
The programs are also cleared when the disc is removed.  
Repeat steps 3 to 4.  
Up to 20 tracks can be programmed.  
5
6
Press PLAY to exit the menu.  
The selected tracks are stored in the player memory and  
playback begins with the first programmed sequence.  
After playback of all programmed tracks is com-  
7
pleted, playback is stopped  
1-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with MP3 Disc  
MP3  
Playing an MP3 disc  
Note  
E
z The REPEAT button is not available when the  
The DVD Player can play MP3 formatted recordings on  
CD-ROM, CD-R or CD-RW discs.  
Before playing MP3 recordings, read the notes on MP3  
Recordings on right.  
E
mark appear. Press PROGRAM to disappear the  
mark.  
z If you press SKIP  
twice or SKIP  
during  
Repeat Track playback, the repeat playback cancels.  
1 Insert a disc and close the tray.  
1
The MP3/JPEG choice menu appears on the TV  
screen.  
Notes on MP3 Discs  
About MP3  
MP3  
z An MP3 file is audio data compressed by using the  
MPEG1 audio layer-3 file-coding scheme. We call  
files that have the .mp3file extension MP3 files.  
z The player can not read an MP3 file that has a file  
extension other than .mp3.  
JPEG  
Press  
/
to select the MP3 then press ENTER.  
2 The MP3 menu appears on the TV screen.  
z The player can not read a non MP3 encoded file that  
has a file extension .mp3.  
MP3  
Program  
TRACK 1.MP3  
TRACK 2.MP3  
TRACK 3.MP3  
TRACK 4.MP3  
TRACK 5.MP3  
TRACK 6.MP3  
TRACK 7.MP3  
TRACK 8.MP3  
MP3 Disc compatibility with this player is limit-  
ed as follows:  
1. Sampling Frequency / only at 44.1kHz  
2. Bit rate / within 32 - 320kbps  
Clear All  
OFF  
56:35  
1
3. CD-R physical format should be ISO 9660”  
4. If you record MP3 files using the software which  
cannot create a FILE SYSTEM, for example Direct-  
CDetc., it is impossible to playback MP3 files. We  
recommend that you use Easy-CD Creator, which  
creates an ISO9660 file system.  
5. A single session disc requires MP3 files in the first  
track. If there is no MP3 file in the 1st track, it can-  
not playback MP3 files. If you wish to playback MP3  
files, format all the data in the disc or use a new  
one.  
6. We do not recommend using CD-RW discs. Please  
use finished CD-R discs only.  
7. File names should be named using 8 letters or less  
and must incorporate .mp3extension  
e.g. ********.MP3.  
MP3 menu  
Press  
3 Playback starts.  
/
to select a track then press PLAY.  
During playback, the current tracks elapsed playing  
time will appear on the display.  
Playback will stop at the end of the disc.  
Press TOP MENU to move to he next page.  
Press MENU to move to the previous page.  
To stop playback at any other time, press STOP.  
4
MP3  
Pause  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY or press  
PAUSE/STEP again.  
8. Do not use special letters such as _?!><+*}{`[@  
]:;\/.,etc.  
9. Total number of files on the disc should be less than  
200.  
10. Use 74 minute CD-R discs (650M), Do not use 80  
minute CD-R (700M) software  
MP3  
Moving to another Track  
once during playback to  
advance to the next track or to return to the beginning  
z Press SKIP  
or  
of the current track.  
z Press SKIP  
vious track.  
twice briefly to step back to the pre-  
This DVD player requires discs/recordings to meet  
certain technical standards in order to achieve optimal  
playback quality. Pre-recorded DVDs are automatically  
set to these standards. There are many different types  
of recordable disc formats (including CD-R containing  
MP3 files). That require certain pre-existing conditions  
(see above) to insure compatible playback.  
MP3  
Repeat Track/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the menu screen.  
2 To repeat all tracks on a disc, press REPEAT two  
times.  
The Repeat All icon appears on the menu screen.  
Customers should also note that permission is  
required in order to download MP3 files and music  
from the Internet. TOSHIBA cannot grant such  
permission. Permission should always be sought  
from the copyright owner.  
3
To cancel Repeat mode, press REPEAT repeatedly until  
the Repeat Off icon appears on the menu screen.  
1-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with JPEG Disc  
JPEG  
Moving to another File  
Viewing a JPEG disc  
z Press SKIP  
or  
once during viewing to  
This DVD Player can play discs with JPEG files on it.  
Make sure the resolution of the JPEG files is less than  
2 mega pixels (2M).  
advance to the next file or to the previous file.  
Repeat All/Off  
1 To repeat all files on a disc, press REPEAT when  
Notes  
z Depending upon the size and number of the JPEG  
files, it could take a long time for the DVD player to  
read the discs contents. If you dont see an on-  
screen display after several minutes, some of the files  
are too big reduce the resolution of the JPEG files  
to less than 2 mega pixels and burn another disc.  
JPEG menu appears.  
The Repeat All icon appears on the menu screen.  
2 Press PLAY or ENTER to start repeat playback.  
3 To cancel Repeat mode, first press STOP to stop  
playback then press REPEAT when JPEG menu  
appears.  
z Total number of files on the disc should be less than  
200.  
The Repeat Off icon appears on the menu screen.  
z Some disc may be incompatible due to different  
recording format or condition of disc.  
Note  
E
The REPEAT button is not available when the  
mark  
E
appear. Press PROGRAM to disappear the  
mark.  
1 Insert a disc and close the tray.  
1
The MP3/JPEG choice menu appears on the TV  
screen.  
MP3  
JPEG  
Press  
/
to select the JPEG then press  
2 ENTER.  
The JPEG menu appears on the TV screen.  
Press RETURN to move to the previous menu  
(MP3/JPEG choice menu).  
JPEG  
Program  
Picture1.jpg  
Picture2.jpg  
Picture3.jpg  
Picture4.jpg  
Picture5.jpg  
Picture6.jpg  
Picture7.jpg  
Picture8.jpg  
Clear All  
Slide Speed Fast  
1/31  
OFF  
JPEG menu  
If you want to view a particular file, press  
3 highlight a file and press ENTER or PLAY.  
Viewing the file proceeding starts.  
/
to  
During viewing a file, press GUI DISPLAY or  
RETURN to move to the previous menu (JPEG  
menu).  
Press TOP MENU to move to the next page.  
Press MENU to move to the previous page.  
Tip  
There are three viewing Slide Speed options: Fast,  
Normal, and Slow. Press  
Speed then press to select the option you want to  
use, and press ENTER.  
/
to highlight the Slide  
/
To stop viewing at any other time, press STOP.  
4 The JPEG menu appears.  
1-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmed Playback with MP3 or JPEG Disc  
Programmed Playback with MP3 or  
JPEG Disc  
Note  
MP3  
JPEG  
The programmed tracks/files are cleared when the  
power is turned off or the disc is removed.  
Program allows you to store your favorite tracks/files  
(or files) for a particular disc in the player memory.  
MP3  
Repeat Programmed Tracks/All/Off  
Program can contain 60 tracks/files.  
1 To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the menu screen.  
Insert a disc and close the tray.  
1
2 To repeat all tracks on the program list, press  
REPEAT two times.  
The MP3/JPEG choice menu appears on the TV  
screen.  
The Repeat All icon appears on the menu screen.  
MP3  
3
To cancel Repeat mode, press REPEAT repeatedly until  
the Repeat Off icon appears on the menu screen.  
JPEG  
Press  
/
to select the MP3 or JPEG then press  
Note  
If you press SKIP  
Repeat Track playback, the repeat playback cancels.  
2 ENTER.  
twice or SKIP  
during  
The MP3 or JPEG menu appears on the TV screen.  
Press RETURN to move to the previous menu  
(MP3/JPEG choice menu).  
JPEG  
Repeat Programmed All/Off  
Press PROGRAM in the stop mode or during  
1 To repeat all files on the program list, press REPEAT  
when JPEG menu appears.  
The Repeat All icon appears on the menu screen.  
3 playback (MP3 only) to enter the Program Edit  
mode.  
E
The  
mark will appear to the right of the word Program  
2 Press PLAY or ENTER to start repeat playback.  
on the right side of the menu screen.  
3 To cancel Repeat mode, first press STOP to stop  
playback then press REPEAT when JPEG menu  
appears.  
Note  
Press PROGRAM to exit the Program Edit mode;  
E
the  
mark will disappear.  
Note  
E
The REPEAT button is not available when the  
mark  
Press  
/
to select a track/file then press  
E
appear. Press PROGRAM to disappear the  
mark.  
4 ENTER to place the selected track/file on the  
Program list.  
Erasing a Track/File from Program List  
1 Press PROGRAM during playback or in the stop  
Repeat step 4 to place additional tracks/files on  
5 the Program list.  
mode to enter the Program Edit mode.  
E
The  
mark will appear.  
MP3  
Program  
E
JPEG  
Program  
E
TRACK 1.MP3  
TRACK 8.MP3  
TRACK 2.MP3  
TRACK 4.MP3  
TRACK 3.MP3  
Picture1.jpg  
Picture1.jpg  
Picture8.jpg  
Picture3.jpg  
Picture6.jpg  
Picture7.jpg  
Note  
TRACK 2.MP3  
TRACK 3.MP3  
TRACK 4.MP3  
TRACK 5.MP3  
TRACK 6.MP3  
TRACK 7.MP3  
TRACK 8.MP3  
Picture2.jpg  
Picture3.jpg  
Picture4.jpg  
Picture5.jpg  
Picture6.jpg  
Picture7.jpg  
Picture8.jpg  
JPEG can be programmed only in stop mode (when  
menu screen is displayed.)  
Clear All  
OFF  
Clear All  
Slide Speed Fast  
2 Press to move to the Program list.  
56:35  
1
1/31  
OFF  
3 Use  
/
to select the track/file that you wish to erase  
from the Program list.  
4 Press CLEAR.  
The track/file will be erased from the Program list.  
MP3 menu  
JPEG menu  
Press  
.
The programmed track/file you selected last is highlighted  
on the program list.  
6
7
Erasing the Complete Program List  
Press  
start playing.  
Press TOP MENU to move to the next page.  
Press MENU to move to the previous page.  
/
to select the track/file you want to  
1 Follow steps 1-2 of Erasing a Track/File from  
Program Listas above.  
2 Use  
/
to select Clear All, then press ENTER.  
The complete Program for the disc will be erased.  
The programs are also cleared when the disc is removed.  
Press ENTER or PLAY to start.  
Playback begins in the order in which you programmed the  
tracks/files and PROG.appears in the display window.  
Playback stops after playing the last programmed track/file  
on the program list.  
8
To resume normal playback from programmed  
playback  
Press and hold PROGRAM for 3 seconds until PROG.”  
indicator disappears in the display window.  
1-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Last Condition Memory  
VCD1.1  
DVD  
CD  
This player memorizes the last condition for the last  
disc you have watched. Settings remain in memory  
even if you remove the disc from the player or switch off  
the player. If you load a disc that has its settings memo-  
rized, the latest stop position is automatically recalled.  
Notes  
Settings are stored in memory for use any time.  
This player does not memorize settings of a disc if  
you switch off the player before commencing playback.  
Screen Saver  
A screen saver image appears when you leave the DVD  
Player in stop mode for about five minutes.  
After the Screen Saver has been engaged for about five  
minutes, the DVD Player will automatically turn itself off.  
VCD2.0  
VCD1.1  
Video Mode Setting DVD  
z With certain discs, the playback picture may be flick-  
ering or Dot Crawl is shown on straight lines. That  
means Vertical interpolation or De-interlace is not  
perfectly matched with the disc. In this case, the  
picture quality may be improved by changing the  
video mode.  
z To change the video mode, press and hold  
GUI DISPLAY about 3 seconds during disc playback.  
The new video mode number selected is displayed on  
the TV screen. Check whether the video quality has  
improved. If not, repeat the above procedure until pic-  
ture quality is improved.  
z Video mode sequence:  
Video1 Video2 Film Adapt Auto.  
z If you turn off the power, the video mode will return to  
initial default state (Auto).  
Detailed Description of each Video Mode  
Auto : The source material of the DVD video (film material or  
video material) is determined from disc information.  
Video1 : Suitable for playing video based content with  
comparatively little motion.  
Video2 : Suitable for playing video based content with  
comparatively more motion.  
Film : Suitable for playing film based content or video based  
material recorded by the progressive scan method.  
Adapt : Determines the appropriate mode (film or video)  
during disc playback, and automatically selects the proper  
mode. Suitable for playing a disc comprised of film and  
video based content.  
1-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Correction  
Symptom  
No power.  
z The power cord is disconnected.  
z Plug the power cord into the wall outlet  
securely.  
z No disc is inserted.  
z Insert a disc. (Check that the DVD or,  
audio CD indicator in the display  
window is lit.)  
The power is on, but  
the DVD player does  
not work.  
z The TV is not set to receive DVD signal z Select the appropriate video input mode  
No picture.  
output.  
on the TV so the picture from the DVD  
player appears on the TV screen.  
z The video cable is not connected  
securely.  
z Connect the video cable into the jacks  
securely.  
z The connected TV power is turned off.  
z Turn on the TV.  
No sound.  
z The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
z Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
z The audio cables are not connected  
securely.  
z Connect the audio cable into the jacks  
securely.  
z The power of the equipment connected  
with the audio cable is turned off.  
z Turn on the equipment connected with  
the audio cable.  
z The Digital Audio Output is set to the  
wrong position.  
z Set the Digital Audio Output to the  
correct position, then turn on the DVD  
player again by pressing POWER.  
The playback picture is z The disc is dirty.  
z Clean the disc.  
poor.  
z No disc is inserted.  
z Insert a disc. (Check that the DVD, or  
audio CD indicator in the DVD display is  
lit.)  
The DVD player does  
not start playback.  
z An unplayable disc is inserted.  
z Insert a playable disc. (Check the disc  
type, color system and Regional code.)  
z The disc is placed upside down.  
z The disc is not placed within the guide.  
z Place the disc with the playback side  
down.  
z Place the disc on the disc tray correctly  
inside the guide.  
z The disc is dirty.  
z Clean the disc.  
z The Rating level is set.  
z Cancel the Rating function or change  
the rating level.  
The remote control  
does not work properly.  
z The remote control is not pointed at the  
remote sensor of the DVD player.  
z Point the remote control at the remote  
sensor of the DVD player.  
z The remote control is too far from the  
DVD player.  
z Operate the remote control within about  
23 ft (7 m).  
z There is an obstacle in the path of the  
z Remove the obstacle.  
remote control and the DVD player.  
z The batteries in the remote control are  
z Replace the batteries with new ones.  
exhausted.  
1-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code List  
Enter the appropriate code number for the initial settings Disc Audio, Disc Subtitleand/or Disc Menu”  
(See page 13).  
Code Language  
6565 Afar  
Code Language  
7079 Faroese  
7082 French  
7089 Frisian  
Code Language  
7678 Lingala  
Code Language  
8375 Slovak  
8376 Slovenian  
8377 Samoan  
8378 Shona  
8379 Somali  
8381 Albanian  
8382 Serbian  
8385 Sudanese  
8386 Swedish  
8387 Swahili  
8465 Tamil  
6566 Abkhazian  
6570 Afrikaans  
6577 Ameharic  
6582 Arabic  
7679 Laothian  
7684 Lithuanian  
7686 Latvian, Lettish  
7771 Malagasy  
7773 Maori  
7165 Irish  
7168 Scots Gaelic  
7176 Galician  
7178 Guarani  
7185 Gujarati  
7265 Hausa  
6583 Assamese  
6588 Aymara  
6590 Azerbaijani  
6665 Bashkir  
6669 Byelorussian  
6671 Bulgarian  
6672 Bihari  
7775 Macedonian  
7776 Malayalam  
7778 Mongolian  
7779 Moldavian  
7782 Marathi  
7273 Hindi  
7282 Croatian  
7285 Hungarian  
7289 Armenian  
7365 Interlingua  
7378 Indonesian  
7383 Icelandic  
7384 Italian  
7783 Malay  
8469 Telugu  
8471 Tajik  
6678 Bengali; Bangla  
6679 Tibetan  
6682 Breton  
7784 Maltese  
7789 Burmese  
7865 Nauru  
8472 Thai  
8473 Tigrinya  
8475 Turkmen  
8476 Tagalog  
8479 Tonga  
8482 Turkish  
8484 Tatar  
6765 Catalan  
6779 Corsican  
6783 Czech  
7869 Nepali  
7876 Dutch  
7387 Hebrew  
7465 Japanese  
7473 Yiddish  
7487 Javanese  
7565 Georgian  
7575 Kazakh  
7576 Greenlandic  
7577 Cambodian  
7578 Kannada  
7579 Korean  
7583 Kashmiri  
7585 Kurdish  
7589 Kirghiz  
7879 Norwegian  
7982 Oriya  
6789 Welsh  
6865 Danish  
6869 German  
6890 Bhutani  
6976 Greek  
8065 Panjabi  
8076 Polish  
8487 Twi  
8083 Pashto, Pushto  
8084 Portuguese  
8185 Quechua  
8277 Rhaeto-Romance  
8279 Rumanian  
8285 Russian  
8365 Sanskrit  
8368 Sindhi  
8575 Ukrainian  
8582 Urdu  
6978 English  
6979 Esperanto  
6983 Spanish  
6984 Estonian  
6985 Basque  
7065 Persian  
7073 Finnish  
7074 Fiji  
8590 Uzbek  
8673 Vietnamese  
8679 Volapük  
8779 Wolof  
8872 Xhosa  
8979 Yoruba  
9072 Chinese  
9085 Zulu  
8372 Serbo-Croatian  
8373 Singhalese  
7665 Latin  
1-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Area Code List  
Enter the appropriate code number for the initial setting Area Code(See page 15).  
Code Area  
Code Area  
Code Area  
Code Area  
AD  
AE  
AF  
AG  
AI  
Andorra  
ER  
ES  
ET  
FI  
Eritrea  
Spain  
Ethiopia  
Finland  
LC  
LI  
LK  
LR  
LS  
LT  
LU  
LV  
Saint Lucia  
SC  
SD  
SE  
SG  
SH  
SI  
Seychelles  
Sudan  
Sweden  
Singapore  
Saint Helena  
Slovenia  
Svalbard and Jan Mayen  
Islands  
Slovak Republic  
Sierra Leone  
San Marino  
Senegal  
Somalia  
Suriname  
Saint Tome and Principe  
Former USSR  
El Salvador  
Syria  
Swaziland  
Turks and Caicos Islands  
Chad  
French Southern  
Territories  
Togo  
Thailand  
Tadjikistan  
Tokelau  
Turkmenistan  
Tunisia  
Tonga  
East Timor  
Turkey  
Trinidad and Tobago  
Tuvalu  
Taiwan  
Tanzania  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
Albania  
Armenia  
Netherlands Antilles  
Angola  
Antarctica  
Argentina  
American Samoa  
Austria  
Liechtenstein  
Sri Lanka  
Liberia  
Lesotho  
Lithuania  
Luxembourg  
Latvia  
Libya  
Morocco  
Monaco  
FJ  
Fiji  
AL  
FK  
FM  
FO  
FR  
FX  
Falkland Islands  
Micronesia  
Faroe Islands  
France  
France (European  
Territory)  
Gabon  
Great Britain  
Grenada  
Georgia  
French Guyana  
Ghana  
Gibraltar  
Greenland  
Gambia  
AM  
AN  
AO  
AQ  
AR  
AS  
AT  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
BF  
BG  
BH  
BI  
SJ  
LY  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SU  
SV  
SY  
SZ  
TC  
TD  
TF  
MA  
MC  
MD  
MG  
MH  
MK  
ML  
MM  
MN  
MO  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
GA  
GB  
GD  
GE  
GF  
GH  
GI  
GL  
GM  
GN  
GP  
GQ  
GR  
GS  
Moldavia  
Madagascar  
Marshall Islands  
Macedonia  
Mali  
Myanmar  
Mongolia  
Australia  
Aruba  
Azerbaidjan  
Bosnia-Herzegovina  
Barbados  
Bangladesh  
Belgium  
Burkina Faso  
Bulgaria  
Bahrain  
Burundi  
Benin  
Bermuda  
Brunei Darussalam  
Bolivia  
Brazil  
Bahamas  
Bhutan  
Bouvet Island  
Botswana  
Belarus  
Belize  
Canada  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
Switzerland  
Ivory Coast  
Cook Islands  
Chile  
Cameroon  
China  
Colombia  
Costa Rica  
Former Czechoslovakia  
Cuba  
Cape Verde  
Christmas Island  
Cyprus  
Czech Republic  
Germany  
Djibouti  
Denmark  
Dominica  
Dominican Republic  
Algeria  
Ecuador  
Estonia  
Egypt  
Western Sahara  
Macau  
Northern Mariana Islands  
Martinique (French)  
Mauritania  
Montserrat  
Malta  
Guinea  
Guadeloupe (French)  
Equatorial Guinea  
Greece  
S. Georgia & S. Sandwich  
Isls.  
Guatemala  
Guam (USA)  
Guinea Bissau  
Guyana  
Hong Kong  
Heard and McDonald  
Islands  
Honduras  
Croatia  
Haiti  
Hungary  
Indonesia  
Ireland  
Israel  
India  
British Indian Ocean  
Territory  
Iraq  
Iran  
Iceland  
Italy  
Jamaica  
TG  
TH  
TJ  
TK  
TM  
TN  
TO  
TP  
TR  
TT  
TV  
TW  
TZ  
UA  
UG  
UK  
UM  
BJ  
Mauritius  
Maldives  
BM  
BN  
BO  
BR  
BS  
BT  
BV  
BW  
BY  
BZ  
CA  
CC  
CF  
CG  
CH  
CI  
CK  
CL  
CM  
CN  
CO  
CR  
CS  
CU  
CV  
CX  
CY  
CZ  
DE  
DJ  
GT  
GU  
GW  
GY  
HK  
HM  
MW Malawi  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
NG  
NI  
NL  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
PE  
PF  
PG  
PH  
PK  
PL  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
RW  
SA  
SB  
Mexico  
Malaysia  
Mozambique  
Namibia  
New Caledonia (French)  
Niger  
Norfolk Island  
Nigeria  
Nicaragua  
Netherlands  
Norway  
Nepal  
Nauru  
Niue  
New Zealand  
Oman  
Panama  
Peru  
Polynesia (French)  
Papua New Guinea  
Philippines  
Pakistan  
HN  
HR  
HT  
HU  
ID  
IE  
IL  
IN  
IO  
Ukraine  
Uganda  
United Kingdom  
USA Minor Outlying  
Islands  
United States  
Uruguay  
Uzbekistan  
Vatican City State  
Saint Vincent &  
Grenadines  
Venezuela  
Virgin Islands (British)  
Virgin Islands (USA)  
Vietnam  
Vanuatu  
Wallis and Futuna Islands  
Samoa  
Yemen  
Mayotte  
Yugoslavia  
South Africa  
Zambia  
Zaire  
Zimbabwe  
US  
UY  
UZ  
VA  
VC  
IQ  
IR  
IS  
IT  
JM  
JO  
JP  
KE  
KG  
KH  
KI  
KM  
KN  
KP  
KR  
KW  
KY  
KZ  
LA  
LB  
VE  
VG  
VI  
Jordan  
Japan  
Kenya  
Poland  
Saint Pierre and Miquelon  
Pitcairn Island  
Puerto Rico  
Portugal  
Palau  
Paraguay  
Qatar  
Reunion (French)  
Romania  
Russian Federation  
Rwanda  
Saudi Arabia  
Solomon Islands  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZR  
ZW  
Kyrgyzstan  
Cambodia6  
Kiribati  
Comoros  
Saint Kitts & Nevis Anguilla  
North Korea  
South Korea  
Kuwait  
DK  
DM  
DO  
DZ  
EC  
EE  
EG  
EH  
Cayman Islands  
Kazakhstan  
Laos  
Lebanon  
1-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power requirements  
Power consumption  
Dimensions (approx.)  
Mass (approx.)  
AC 120V , 60 Hz  
14W  
430 X 79.9 X 410 mm (16.9 x 3.2 x 16.2 inches) (w x h x d)  
5.1 kg (12.3 lbs)  
Operating temperature  
Operating humidity  
5˚C to 35˚C (41˚F to 95˚F)  
5 % to 90 %  
System  
Laser  
Semiconductor laser, wavelength 650 nm  
NTSC  
Signal system  
Frequency response  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 100 dB (DVD)  
More than 95 dB (CD)  
Outputs  
VIDEO OUT  
S-VIDEO OUT  
1 Vp-p 75 ohms, sync negative, RCA jack x 1  
(Y) 1.0 V (p-p), 75 , negative sync., Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 ohms  
COMPONENT VIDEO OUT  
(Y) 1.0 V (p-p), 75 , negative sync., RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2  
Audio output (digital audio)  
Audio output (optical audio)  
Audio output (analog audio)  
0.5 V (p-p), 75 , RCA jack x 1  
5 V (p-p), 75 , Optical connector x 1  
2.0 Vrms (1 KHz, 0 dB), 330 , RCA jack (L, R) x 2  
Accessory  
Video cable . . . . . . . . . . . . . . . . . . . . . . .1  
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1  
Remote control . . . . . . . . . . . . . . . . . . . .1  
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2  
z Design and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories. Dolbyand the double-D symbol are trademarks of Dolby Laboratories.  
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.  
DTSand DTS Digital Outare trademarks of Digital Theater Systems, Inc.  
1-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY DVD VIDEO PLAYER  
Toshiba America Consumer Products, Inc. (TACP), Toshiba Hawaii (THI) and Toshiba Canada Limited (TCL) make the follow-  
ing limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from the orig-  
inal purchaser and to no other purchaser or transferee.  
Limited Ninety (90) Day Warranty  
Commercial Units  
TACP/THI warrant this product against defects in materials or  
workmanship for a period of ninety (90) days after the date of  
original retail purchase. During this period, TACP/ THI will  
repair or replace a defective product or part, at their option,  
with a new or refurbished product or part without charge to  
you. You must deliver the entire product to a TACP/THI  
Authorized Service Station. You are responsible for all trans-  
portation and insurance charges for the unit to and from the  
Authorized Service Station. If you live in the  
U.S.A. you may, at your option, return your DVD Unit to:  
Toshiba America Consumer Products Inc.  
Products sold and used for commercial use have a limited  
ninety (90) day warranty for all parts and labor.  
Owners Manual  
You should read the owners manual thoroughly before operat-  
ing this product. You should complete and mail the enclosed  
Demographic card within ten (10) days after you, or the person  
who has given you this product as a gift, purchased this prod-  
uct. This is one way to enable TACP to provide you with better  
customer service and improved products. Failure to return the  
card will not affect your rights under this warranty.  
Returns Center  
1420C Toshiba Dr.  
Your Responsibility  
Lebanon, TN 37087  
The above warranties are subject to the following conditions:  
(1) You must retain your bill of sale or provide other proof of  
purchase.  
(2) You must notify a TACP/THI/TCL /Authorized Service  
Station within thirty (30) days after you discover a defective  
product or part.  
Upon receipt we will, at our option, exchange the DVD Unit  
with a new or refurbished unit. Canadian consumers are  
requested to contact TCL. In Hawaii consumers are  
requested to contact THI.  
Limited One (1) Year Warranty  
(3) All warranty servicing of this product must be made by a  
TACP/THI/TCL Authorized Service Station.  
(4) U.S.A. warranties are effective only if the product is pur-  
chased and operated in the Continental U.S.A. or Puerto  
Rico.  
TACP/THI further warrant the parts in this product against  
defects in materials or workmanship for a period of one (1)  
year after the date of original retail purchase. During this peri-  
od, TACP/THI will repair or replace a defective product or part,  
at their option, with a new or refurbished product or part with-  
out charge to you, except that if a defective part is replaced  
after ninety (90) days from the date of the original retail pur-  
chase you pay labor charges involved in the replacement. You  
must also deliver the entire product to a TACP/THI Authorized  
Service Station. You are responsible for all transportation and  
insurance charges for the unit to and from the Authorized  
Service Station. If you live in the U.S.A. you may, at your  
option, return your DVD Unit to:  
(5) Labor service charges for set installation. Set up, adjust-  
ment of customer controls and installation or repair of  
antenna systems are not covered by this warranty.  
Reception problems caused by inadequate antenna sys-  
tems are your responsibility.  
(6) Warranties extend only to defects in materials or workman-  
ship as limited above and do not extend to any product or  
parts which have been lost or discarded by you or to dam-  
age to products or parts caused by misuse, accident, dam-  
age caused by Acts of God, such as lighting or fluctuations  
in electric power, improper installation, improper mainte-  
nance or use in violation of instructions furnished by us; or  
to units which have been altered or modified without autho-  
rization of TACP/THI/TCL or to damage to products or part  
thereof which have had the serial number removed,  
altered, defaced or rendered illegible.  
Toshiba America Consumer Products Inc.  
Returns Center  
1420C Toshiba Dr.  
Lebanon, TN 37087  
Upon receipt we will, at our option, exchange the DVD Unit  
with a new or refurbished unit. Canadian Consumers are  
requested to contact TCL. In Hawaii consumers are  
requested to contact THI.  
(7) Should you elect to return your DVD Unit to TACP after the  
ninety (90) days and within one (1) year, or after the war-  
ranty period has expired: Call (800)-631-3811 to receive  
information concerning an exchange price. Payment must  
be enclosed with product in the form of a certified check or  
money order including reason for return.  
Rental Units  
The warranty for rental units begin with the first rental or thirty  
(30) days from the date of shipment to the rental firm, whichev-  
er comes first.  
(8) Physically damaged DVD Units are not acceptable for  
repair or exchange whether in or out of warranty and will  
be returned as received.  
(Continued)  
1-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY DVD VIDEO PLAYER (Continued)  
How to Obtain Warranty Service  
(1) Refer to the troubleshooting guide in your owners manual. This check list may solve your problem.  
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days  
after you find a defective product or part.  
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center. Products  
shipped to the Service Station must be insured and safely and securely packed, preferably in the original shipping carton,  
and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be enclosed.  
In the Continental United States contact: In Hawaii contact:  
Toshiba Hawaii Inc.  
In Canada contact:  
Consumer Electronics Group  
191 McNabb Street  
Markham, Ontario L3R 8H2  
(905)-470-5400  
Consumer Electronics Group  
22171 Fraserwood Way  
Richmond, B.C. V6W 1J5  
(604)-303-2500  
327 Kamakee Street  
Honolulu, HA 96814  
(808)-521-5377  
Toll Free  
800-631-3811  
Consumer Electronics Group  
1643 North Service Road  
Droval, QC H9P 1J1  
(514)-856-4100  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are  
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law  
as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar oblig-  
ations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI be liable for  
consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any  
manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising under the  
warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days from the date  
you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under state law.  
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states  
do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of inci-  
dental or consequential damages, so the above provisions may not apply to you.  
ATTENTION CANADIAN CONSUMERS:  
Canadian consumers are requested to complete the special Canadian Warranty Registration Formenclosed, and forward this  
completed form with a copy of bill of sale to TOSHIBA OF CANADA to Register and Validatetheir warranty. Product must be  
purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not covered by  
these warranties.  
IMPORTANT: PACKING AND SHIPPING INSTRUCTION  
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the  
original carton box containing the unit into another carton using more packing material.  
1-62  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teledyne Automobile Parts 730 Bubbler User Manual
Thermador Food Warmer WDC30E User Manual
Timex Watch W260 User Manual
Toshiba CRT Television 35AFX54 User Manual
Toshiba Telephone DK14 User Manual
Tripp Lite Network Cables N002 020 GY User Manual
Troy Bilt Tiller 643B User Manual
True Fitness Treadmill PS75 User Manual
Tyco Computer Monitor 1229L User Manual
Vector Switch VEC049D User Manual