Toshiba DVD Player SD 400V User Manual

Introduction  
Connections  
2
16  
20  
26  
38  
46  
Basic playback  
DVD VIDEO PLAYER  
S D-4 0 0 V  
S D-K6 0 0  
Advanced  
playback  
Function setup  
Others  
OW NER’S MANUAL  
79077155  
9876123900  
©2001 Toshiba Corporation  
S
Download from Www.Somanuals.com. All Manuals Search And Download.  
The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in  
each pole shall be incorporated in the electrical installation of the building.  
CAUTION:  
These servicing instructions are for use by qualified service personnel only. To reduce the risk of  
electric shock do not perform any servicing other than that contained in the operating  
instructions unless you are qualified to do so.  
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video  
player.  
Model No.  
Serial No.  
Retain this information for future reference.  
Location of the required label  
PRODUCT IS CERTIFIED BY THE MANUFACTURER TO  
COMPLY WITH DHHS RULE 21 CFR SUBCHAPTER J  
APPLICABLE AT THE DATE OF MANUFACTURE.  
MANUFACTURED  
T O S H IB A C O R P O R A T IO N  
1-1,SHIBAURA 1-CHOME,MINATO-KU.  
TOKYO 105-8001,JAPAN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS  
OWNERS MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR  
FUTURE REFERENCE.  
This set has been designed and manufactured to assure personal safety. Improper use can result in electric  
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following  
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that  
can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturers instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding  
type plug has two blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug does not fit into  
your outlet, consult an electrician for replacement of the obsolete outlet.  
10.Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12.Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to avoid injury from tip-over.  
S3125A  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
IMPORTANT SAFETY INSTRUCTIONS  
13.Unplug this apparatus during lightning storms or when unused for long periods  
of time.  
14.Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
15.When you use headphones, keep the volume at a moderate level. If you use  
the headphones continuously with high volume sound, it may cause hearing  
damage.  
16.Do not overload wall outlets; extension cords, or integral convenience  
receptacles as this can result in a risk of fire or electric shock.  
17.Never insert objects of any kind into this apparatus through openings as they  
may touch dangerous voltage points or short-out parts that could result in a  
fire or electric shock. Never spill liquid of any kind on the apparatus.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
18.Keep your fingers well clear of the disc tray as it is closing. Neglecting to do  
so may cause serious personal injury.  
19.Do not place a heavy object on or step on the apparatus. The object may fall,  
causing serious personal injury and serious damage to the apparatus.  
20.Do not use a cracked, deformed, or repaired disc. These discs are easily  
broken and may cause serious personal injury and apparatus malfunction.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Precautions  
Notes on handling  
Notes on moisture condensation  
When shipping the DVD video player, the original  
shipping carton and packing materials come in handy.  
For maximum protection, repack the unit as it was  
originally packed at the factory.  
Do not use volatile liquids, such as insect spray, near  
the DVD video player. Do not leave rubber or plastic  
products in contact with the DVD video player for a  
long time. They will leave marks on the finish.  
The top and rear panels of the DVD video player may  
become warm after a long period of use. This is not a  
malfunction.  
Moisture condensation damages the DVD video  
player. Please read the following carefully.  
Moisture condensation occurs, for example, when you  
pour a cold drink into a glass on a warm day. Drops of  
water form on the outside of the glass. In the same way,  
moisture may condense on the optical pick-up lens  
inside this unit, one of the most crucial internal parts of  
the DVD video player.  
o
f
n
s
When the DVD video player is not in use, be sure to  
remove the disc and turn off the power.  
If you do not use the DVD video player for a long  
period, the unit may not function properly in the  
future. Turn on and use the DVD video player  
occasionally.  
Optical pick-up  
lens  
Moisture condensation occurs during the  
following cases.  
When you bring the DVD video player directly from a  
cold place to a warm place.  
Notes on locating  
When you use the DVD video player in a room where  
you just turned on the heater, or a place where the  
cold wind from the air conditioner directly hits the unit.  
In summer, when you use the DVD video player in a  
hot and humid place just after you move the unit from  
an air conditioned room.  
Place the DVD video player on a level surface. Do not  
use it on a shaky or unstable surface such as a  
wobbling table or inclined stand. The loaded disc may  
come off the proper position and cause damage to  
the DVD video player.  
When you place this DVD video player near a TV,  
radio, or VCR, the playback picture may become poor  
and the sound may be distorted. In this case, place  
the DVD video player away from the TV, radio, or  
VCR.  
When you use the DVD video player in a humid  
place.  
Notes on cleaning  
Use a soft, dry cloth for cleaning.  
For stubborn dirt, soak the cloth in a weak detergent  
solution, wring well and wipe. Use a dry cloth to wipe  
it dry.  
Do not use any type of solvent, such as thinner and  
benzine, as they may damage the surface of the DVD  
video player.  
Do not use the DVD video player when moisture  
condensation may occur.  
If you use the DVD video player in such a situation, it  
may damage discs and internal parts. Remove the  
disc, connect the power cord of the DVD video player  
to the wall outlet, turn on the DVD video player, and  
leave it for two or three hours. After two or three  
hours, the DVD video player will have warmed up and  
evaporated any moisture. Keep the DVD video player  
connected to the wall outlet and moisture  
If you use a chemical saturated cloth to clean the unit,  
follow that products instructions.  
To obtain a clear picture  
The DVD video player is a high technology, precision  
device. If the optical pick-up lens and disc drive parts  
are dirty or worn down, the picture quality becomes  
poor. To obtain a clear picture, we recommend regular  
inspection and maintenance (cleaning or parts  
replacement) every 1,000 hours of use depending on  
the operating environment. For details, contact your  
nearest dealer.  
condensation will seldom occur.  
Wall outlet  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Discs  
On handling discs  
Structure of disc contents  
Do not touch the playback side of the disc.  
Normally, DVD video discs are divided into titles, and  
the titles are sub-divided into chapters. Audio CDs are  
divided into tracks.  
DVD video disc  
DVD video disc  
Title 1  
Title 2  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Playback side  
Do not attach paper or tape to discs.  
Audio CD  
Audio CD  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
On cleaning discs  
Fingerprints and dust on the disc cause picture and  
sound deterioration. Wipe the disc from the center  
outwards with a soft cloth. Always keep the disc  
clean.  
Each title, chapter or track is assigned a number, which  
is called title number, chapter numberor track  
numberrespectively.  
There may be discs that do not have these numbers.  
Notes on copyright  
It is forbidden by law to copy, broadcast, show,  
broadcast on cable, play in public, and rent copyrighted  
material without permission.  
If you cannot wipe off the dust with a soft cloth, wipe  
the disc lightly with a slightly moistened soft cloth and  
finish with a dry cloth.  
DVD video discs are copy protected, and any  
Do not use any type of solvent such as thinner,  
benzine, commercially available cleaners or antistatic  
spray for vinyl LPs. It may damage the disc.  
recordings made from these discs will be distorted.  
This product incorporates copyright protection  
technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
On storing discs  
Do not store discs in a place subject to direct sunlight  
or near heat sources.  
Do not store discs in places subject to moisture and  
dust such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing  
objects on discs outside of their case may cause  
warping.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Notes on Discs (continued)  
About this owners manual  
Playable discs  
This owners manual explains the basic instructions of  
this DVD video player. Some DVD video discs are  
produced in a manner that allows specific or limited  
operation during playback. As such, the DVD video  
player may not respond to all operating commands. This  
is not a defect in the DVD video player. Refer to  
instruction notes of discs.  
This DVD video player can play the following discs.  
Maximum  
playback time  
Disc  
Size  
Disc Mark  
Contents  
Approx. 4 hours  
(single sided disc)  
12 cm  
Audio  
+
video  
(moving  
pictures)  
Approx. 8 hours  
(double sided disc)  
may appear on the TV screen during operation.  
DVD  
video  
discs  
A “ ” means that the operation is not permitted by the  
DVD video player or the disc.  
Approx. 80 minutes  
(single sided disc)  
8 cm  
Approx. 160 minutes  
(double sided disc)  
Notes on region numbers  
The region number of this DVD video player is 1. If  
region numbers, which stand for their playable area, are  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
1
printed on your DVD video disc and you do not find  
Audio  
CDs  
ALL  
Audio  
or  
, disc playback will not be allowed by the player.  
8 cm  
(CD  
single)  
(In this case, the DVD video player will display a  
message on-screen.)  
You cannot play discs other than those listed above.  
You cannot play discs of CD-R, CD-RW, DVD-RAM,  
DVD-RW, etc., even if they may be labeled marks  
listed above.  
This DVD video player uses the NTSC color system,  
and cannot play DVD video discs recorded in any  
other color system (PAL, SECAM, etc.).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introduction  
Advanced playback  
SAFETY PRECAUTIONS ..........................2  
IMPORTANT SAFETY INSTRUCTIONS ...4  
Precautions ...............................................8  
Notes on Discs..........................................9  
Notes on region numbers ............................... 10  
Accessing a Specific Location Directly ... 26  
Entering the time of the desired location ........ 26  
Playing Repeatedly.................................27  
Repeating a title, chapter, or track.................. 27  
Repeating a specific segment ........................ 27  
Playing in a Favorite Order ....................28  
Setting titles, chapters, or tracks in a favorite  
Table of Contents ................................... 11  
Identification of Controls .......................12  
Front panel ..................................................... 12  
Rear panel ...................................................... 12  
DVD display.................................................... 13  
Remote control ............................................... 14  
Loading batteries ............................................ 15  
Operating with the remote control .................. 15  
order ............................................................. 28  
Playing in Random Order ......................29  
Playing titles, chapters or tracks in random  
order ............................................................. 29  
Zooming a Picture ..................................30  
Zooming a picture........................................... 30  
Selecting the picture enhancement  
(E.P.M.) .....................................................31  
Selecting the picture enhancement ................ 31  
Connections  
Connecting to a TV .................................16  
Selecting the sound enhancement  
(E.A.M.) ....................................................32  
Selecting the sound enhancement ................. 32  
Connecting to a TV......................................... 16  
Connecting to an audio system and TV  
equipped with component video inputs ........ 17  
Selecting the Camera Angle ..................33  
Changing the camera angle ........................... 33  
Connecting to Optional Equipment ......18  
Connecting to an amplifier equipped with a  
Dolby Digital decoder ................................... 18  
Connecting to an amplifier equipped with  
Dolby Pro Logic Surround ............................ 18  
Connecting to an amplifier equipped with a  
DTS decoder ................................................ 18  
Connecting to an amplifier equipped with an  
MPEG2 audio decoder ................................. 19  
Selecting Subtitles .................................34  
Selecting a subtitle language ......................... 34  
Selecting a Language.............................35  
Selecting a playback audio setting ................. 35  
Operating in the on-screen display mode ... 36  
Operating in the on-screen display mode....... 36  
Connecting to an amplifier equipped with a  
digital audio input ......................................... 19  
Function setup  
Customizing the Function Settings ......38  
Setting procedure ........................................... 38  
Setting details ................................................. 40  
Basic playback  
Playing a Disc .........................................20  
Basic playback ............................................... 20  
Others  
Playing in fast reverse or fast forward  
directions ...................................................... 22  
Table of Languages ................................46  
Before Calling Service Personnel .........47  
Specifications .........................................48  
Playing frame by frame .................................. 22  
Playing in slow-motion.................................... 23  
Resuming playback from the same location... 23  
LIMITED WARRANTY DVD VIDEO  
PLAYER ...................................................49  
Locating a Specific Title, Chapter, or  
Track ........................................................24  
Locating a title using the top menu................. 24  
Locating a title by entering the title number.... 24  
Locating a specific chapter or track directly ... 25  
Locating a specific chapter or track ................ 25  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of Controls  
See the page in  
for details.  
Front panel  
PAUSE button  
21  
STOP button  
21  
POWER indicator  
Disc tray  
20  
20  
PLAY button  
20  
STOP  
PLAY  
POWER  
OPEN/CLOSE  
PAUSE  
SKIP  
POWER button  
DVD display  
SKIP buttons  
25  
20  
13  
OPEN/CLOSE button  
20  
Rear panel  
16  
VIDEO OUT jack  
AC inlet  
VIDEO OUT (Y/PB/PR)  
(Component video) jacks  
17  
AC IN  
VIDEO OUT  
VIDEO  
Y
PB  
PR  
BITSTREAM  
/PCM  
R
L
DIGITAL  
AUDIO OUT  
S
ANALOG  
BITSTREAM/PCM (DIGITAL)  
AUDIO OUT jack  
18 19  
ANALOG AUDIO OUT (L/R) jacks 16 17  
S VIDEO OUT jack  
Power cord  
16  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pressing of the FL DIM button on the remote  
control changes the brightness of the display.  
DVD display  
FL DIM  
Dimmed  
Normal  
Off  
Total playing time indicator  
Chapter number indicator  
Memory playback indicator  
Play mode indicator  
Title number indicator  
Track number  
indicator  
Random playback indicator  
-
TITLE  
TOTAL  
CHP TRK  
M R  
A B  
DVD  
CD  
Multifunctional indicator (indicates operating status or  
messages, etc.)  
Angle icon indicator  
DVD/CD indicator  
Repeat playback indicator  
When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches  
them to the title/chapter/track number indicators. Some discs may not permit this operation.  
The indicators vary depending on the kinds of discs you play.  
DVD video disc  
Audio CD  
During playback:  
During playback:  
Example  
Example  
TRK  
TITLE  
CHP  
DVD  
CD  
Playing track 6  
Playing chapter 3 of title 2  
Some discs may not display chapter  
numbers or elapsed time.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of Controls (continued)  
The instructions in this manual describe the functions on the remote control. See the page in  
for details.  
Remote control  
OPEN/CLOSE  
OPEN/CLOSE button 20  
Power button 20  
REV  
FWD  
SKIP  
REV button 22  
FWD button 22  
SKIP buttons 25  
PAUSE/STEP  
TOP MENU  
STOP  
PLAY  
PLAY button 20  
ENTER button 38  
PAUSE/STEP button 21 22  
STOP button  
21  
MENU  
MENU button*  
TOP MENU button 24  
Direction buttons 38  
ENTER  
(
/
/
/
)
RETURN  
CLEAR  
ANGLE  
CLEAR button 25  
RETURN button 38  
SUBTITLE  
AUDIO  
ANGLE button 33  
AUDIO button 35  
SETUP DISPLAY ZOOM  
SLOW  
SLOW button 23  
SETUP button 38  
ZOOM button 30  
DISPLAY button 36  
FL DIM  
E.P.M. FL SELECT  
E.A.M.  
FL DIM button  
FL SELECT button  
13  
SUBTITLE button  
E.A.M. button 32  
E.P.M. button 31  
34  
SEARCH  
13  
1
4
7
2
5
8
3
6
T
T button 24  
+10  
Number buttons 24  
9
0
RANDOM MEMORY  
A-B RPT  
REPEAT  
RANDOM button 29  
A-B RPT button  
27  
MEMORY button 28  
REPEAT button 27  
* MENU button  
Use the MENU button to display the menu included on  
many DVD video discs. To operate a menu, follow the  
instructions in Locating a title using the top menu.”  
24  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the illustrations of the battery compartment  
There are two types of battery compartment in the  
supplied remote controls. (This does not mean a  
difference in performance between the two.)  
Refer to either illustration depending on the actual  
remote control.  
Loading batteries  
Operating with the remote control  
Open the cover.  
Point the remote control at the remote  
sensor and press the buttons.  
1
STOP  
PLAY  
2
POWER  
OPEN/CLOSE  
PAUSE  
SKIP  
1
30°  
Within about 7 m (23 feet)  
30°  
Insert batteries (AA size).  
2
3
Distance: About 7 m (23 feet) from the front of the  
remote sensor  
Angle:  
About 30° in each direction of the front of  
the remote sensor  
* Do not expose the remote sensor of the DVD video  
player to a strong light source such as direct  
sunlight or other illumination. If you do so, you may  
not be able to operate the DVD video player via the  
remote control.  
Make sure to match the + and on the batteries  
to the marks inside the battery compartment.  
Close the cover.  
Notes on the remote control  
Direct the remote control at the remote sensor of the DVD  
video player.  
Do not drop or give the remote control a shock.  
Do not leave the remote control near an extremely hot or  
humid place.  
Notes on batteries  
Do not spill water or put anything wet on the remote  
control.  
Do not open the remote control.  
Improper use of batteries may cause battery leakage and  
corrosion. To operate the remote control correctly, follow the  
instructions below.  
Do not insert batteries into the remote control in the wrong  
direction.  
Do not charge, heat, open, or short-circuit the batteries.  
Do not throw batteries into a fire.  
Do not leave dead or exhausted batteries in the remote  
control.  
Do not use different types of batteries together, or mix old  
and new batteries.  
If you do not use the remote control for a long period of  
time, remove the batteries to avoid possible damage from  
battery corrosion.  
If the remote control does not function correctly or if the  
operating range becomes reduced, replace all batteries  
with new ones.  
If battery leakage occurs, wipe the battery liquid from the  
battery compartment, then insert new batteries.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to a TV  
Connect the DVD video player to your TV.  
For details of output sound, see 35  
.
Connecting to a TV  
Signal flow  
AC IN  
VIDEO OUT  
VIDEO  
Y
P
B
PR  
BITSTREAM  
/PCM  
R
L
DIGITAL  
AUDIO OUT  
S
ANALOG  
(yellow) (red)  
(white)  
To S VIDEO  
OUT  
To wall outlet  
To ANALOG AUDIO OUT  
To VIDEO  
OUT  
Audio/video cable (supplied)  
To audio inputs  
To video input  
(yellow)  
(red)  
(white)  
To S video input  
S video cable (not supplied)  
If the TV has an S video input, connect the  
DVD video player with an S video cable.  
When using an S video cable, do not  
connect the yellow video cable.  
TV or monitor with  
audio/video inputs  
• Make the following setting.  
On-screen display  
Select:  
Page  
38  
40  
“Audio Out Select” “Analog 2ch”  
Notes  
• Refer to the owner’s manual of the connected TV as well.  
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet  
before making any connections.  
• If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect  
to your TV.  
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or  
video selector, the playback picture may be distorted as DVD video discs are copy protected.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an audio system andTV equipped with component video inputs  
Signal flow  
AC IN  
VIDEO OUT  
VIDEO  
Y
P
B
PR  
BITSTREAM  
/PCM  
R
L
DIGITAL  
AUDIO OUT  
S
ANALOG  
To wall outlet  
(red)  
(white)  
To PR  
VIDEO VIDEO VIDEO  
OUT OUT OUT  
To PB  
To Y  
To ANALOG AUDIO OUT  
To audio inputs of  
the amplifier  
To Y video input  
To PB video input  
To PR video input  
(red)  
(white)  
Audio system  
TV or monitor with  
component video inputs  
Component video (ColorStream®) outputs/inputs  
Make the following setting.  
Some TVs or monitors are equipped with component video inputs. Connecting to  
these inputs allows you to enjoy higher quality picture playback.  
Actual labels for component video inputs may vary depending on the TV  
manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)  
On-screen display  
Select:  
Page  
38  
40  
Audio Out Select” “Analog 2ch”  
In some TVs or monitors, the color levels of the playback picture may be reduced  
slightly or the tint may change. In such a case, adjust the TV or monitor for  
optimum performance.  
Notes  
Refer to the owners manual of the connected equipment as well.  
When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment  
from the wall outlet before making any connections.  
If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the  
DVD video player away from the tuner and radio.  
The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receivers volume to a moderate  
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.  
Turn off the amplifier before you connect or disconnect the DVD video players power cord. If you leave the amplifier power  
on, the speakers may be damaged.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to Optional Equipment  
You can enjoy high quality dynamic sounds by connecting the DVD video player  
to optional audio equipment.  
For connection to your TV, see Connecting to a TV16 17  
For details of output sound, see 35  
.
: Front speaker  
: Rear speaker  
: Sub woofer  
: Center speaker  
: Signal flow  
.
Connecting to an amplifier equipped with a Dolby Digital decoder  
Dolby Digital  
Manufactured under license from Dolby  
Laboratories. Dolby, Pro Logic, and  
the double-D symbol are trademarks of  
Dolby Digital is the surround sound technology used in theaters showing the latest movies,  
and is now available to reproduce this realistic effect in the home. You can enjoy motion  
picture and live concert DVD video discs with this dynamic realistic sound by connecting the  
Dolby Laboratories. Confidential  
DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby  
Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full  
benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital  
soundtracks, as well as from titles with the Dolby Surround mark.  
unpublished works. ©1992-1997 Dolby  
Laboratories. All rights reserved.  
Use DVD video discs encoded via  
the Dolby Digital recording  
system.  
Amplifier equipped with a  
VIDEO OUT  
VIDEO  
Y
P
B
PR  
Dolby Digital decoder  
Make the following setting.  
BITSTREAM  
/PCM  
R
L
DIGTAL  
AUDIO OUT  
S
ANALOG  
To COAXIAL type  
digital audio input  
On-screen display  
Audio Out Select” “Bitstream”  
Recording system  
Select:  
Page  
To BITSTREAM/PCM  
(DIGITAL) AUDIO OUT  
38  
40  
75 coaxial cable  
D
35  
Connecting to an amplifier equipped with Dolby Pro Logic Surround  
Dolby Pro Logic Surround  
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left  
front speakers, a center speaker, and one or two rear speakers).  
With an amplifier equipped with Dolby Digital  
Connect the equipment the same way as described in Connecting to an amplifier  
equipped with a Dolby Digital decoder.Refer to that amplifiers owners manual and set  
the amplifier so you can enjoy Dolby Pro Logic Surround sound.  
Make the following setting.  
On-screen display  
Select:  
Page  
With an amplifier not equipped with Dolby Digital  
Connect the equipment as follows.  
38  
40  
Audio Out Select” “Analog 2ch”  
Amplifier equipped with  
Dolby Pro Logic Surround  
VIDEO OUT  
Be sure to set Audio Out Select”  
to Analog 2chwhen you enjoy  
sounds of Dolby Pro Logic  
VIDEO  
Y
PB  
PR  
*
BITSTREAM  
/PCM  
R
L
DIGITAL  
AUDIO OUT  
S
ANALOG  
To audio input  
Surround using this connection.  
To ANALOG  
AUDIO OUT  
* Connect one or two rear speakers.  
The output sound from the rear speakers will be  
monaural even if you connect two rear speakers.  
Audio cable  
Connecting to an amplifier equipped with a DTS decoder  
Digital Theater Systems (DTS)  
DTS is a high quality surround technology used in theaters and now available for home use,  
on DVD video discs or audio CDs.  
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS  
encoded sound tracks on DVD video discs or audio CDs.  
DTSand DTS Digital Surroundare  
trademarks of Digital Theater Systems,  
Inc.  
Use DVD video discs or audio  
CDs encoded via the DTS  
recording system.  
VIDEO OUT  
Amplifier equipped with  
a DTS decoder  
VIDEO  
Y
P
B
PR  
Make the following setting.  
BITSTREAM  
/PCM  
R
L
DIGTAL  
AUDIO OUT  
S
ANALOG  
On-screen display  
Audio Out Select” “Bitstream”  
Recording system DTS  
Select:  
Page  
To COAXIAL type  
digital audio input  
38  
40  
To BITSTREAM/PCM  
(DIGITAL) AUDIO OUT  
75 coaxial cable  
35  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning  
When you are connecting (via the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack) an AV decoder that does not have  
Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set Audio Out Selectto PCMfrom  
the on-screen displays 38 40 . Otherwise, high volume sound may damage your hearing as well as the speakers.  
When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog  
stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG  
AUDIO OUT (L/R) jacks of the DVD video player are connected to an amplification system. To enjoy DTS Digital  
Surroundplayback, an external 5.1 channel DTS Digital Surrounddecoder system must be connected to the  
BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD video player.  
Connecting to an amplifier equipped with an MPEG2 audio decoder  
MPEG2 sound  
You can enjoy motion picture and live concert DVD video discs with dynamic  
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder  
or MPEG2 audio processor.  
Use DVD video discs encoded via  
the MPEG2 recording system.  
Make the following setting.  
Amplifier equipped with an  
MPEG2 audio decoder  
VIDEO OUT  
VIDEO  
Y
P
B
PR  
BITSTREAM  
/PCM  
R
L
DIGTAL  
AUDIO OUT  
S
ANALOG  
To COAXIAL type  
digital audio input  
On-screen display  
Select:  
Page  
To BITSTREAM/PCM  
(DIGITAL) AUDIO OUT  
38  
40  
Audio Out Select” “Bitstream”  
75 coaxial cable  
Recording system  
MPEG  
35  
Connecting to an amplifier equipped with a digital audio input  
2 channel digital stereo  
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an  
amplifier equipped with a digital audio input and speaker system (right and left front  
speakers).  
Amplifier equipped with  
VIDEO OUT  
VIDEO  
Y
P
B
PR  
a digital audio input  
Make the following setting.  
BITSTREAM  
/PCM  
R
L
DIGITAL  
AUDIO OUT  
S
ANALOG  
To COAXIAL type  
digital audio input  
On-screen display  
Select:  
Page  
To BITSTREAM/PCM  
(DIGITAL) AUDIO OUT  
38  
40  
Audio Out Select”  
PCM”  
75 coaxial cable  
Notes  
DO NOT connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby  
Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the  
BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD video player.  
Connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD video player to the DIGITAL (COAXIAL)input of a  
Receiver or Processor.  
Refer to the owners manual of the connected equipment as well.  
When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment  
from the wall outlet before making any connections.  
The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receivers volume to a moderate  
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.  
Turn off the amplifier before you connect or disconnect the DVD video players power cord. If you leave the amplifier power  
on, the speakers may be damaged.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
CAUTION  
Keep your fingers well clear of the disc tray as it is closing.  
Neglecting to do so may cause serious personal injury.  
Playing a Disc  
This section shows you the basics on how to play a disc.  
POWER indicator  
3
STOP PLAY  
STOP  
PLAY  
POWER  
OPEN/CLOSE  
PAUSE  
SKIP  
DVD display  
PAUSE  
1
2,  
4
DVD  
CD  
Basic playback  
Preparations  
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.  
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected  
to the DVD video player.  
Press the power button (POWER).  
Press OPEN/CLOSE to close the disc  
4tray.  
1
The DVD video player turns on and  
the POWER indicator on the player  
illuminates.  
Playback starts.  
OPEN/CLOSE  
When the DVD video player is turned on for  
the first time, a message appears. Press  
ENTER, and make the proper settings before  
If you insert a DVD video disc that contains a top  
menu, a menu may appear. See Locating a title  
proceeding to step 2.  
45  
using the top menu.”  
24  
You may need to press the TOP MENU or MENU  
button to display disc menu (depending on the actual  
DVD video disc.)  
Press OPEN/CLOSE.  
2
3
The disc tray opens.  
OPEN/CLOSE  
To start playback in the stop mode  
Press PLAY.  
Place the disc on the disc tray.  
PLAY  
With the playback  
side down  
There are two different disc sizes. Place the disc in  
the correct guide on the disc tray. If the disc is out of  
the guide, it may damage the disc and cause the  
DVD video player to malfunction.  
Do not place a disc which is unplayable in this DVD  
video player.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To obtain a higher quality picture  
2, 4  
Occasionally, some picture noise not usually visible during a normal broadcast  
may appear on the TV screen while playing a DVD video disc because the high  
resolution pictures on these discs include a lot of information. While the amount of  
noise depends on the TV you use with this DVD video player, you should generally  
reduce the sharpness adjustment on your TV when viewing DVD video discs.  
1
PAUSE/STEP  
PLAY  
STOP  
MENU  
ENTER  
/
DVD  
CD  
About  
DVD  
CD  
The  
icons on the heading bar show the playable discs for the function  
described under that heading.  
DVD  
: You can use this function with DVD video discs.  
: You can use this function with audio CDs.  
TOP MENU  
CD  
To pause playback (still mode)  
About the screen saver  
Press PAUSE/STEP during playback.  
If you pause a picture of a DVD video disc and leave it  
still for a long while, the screen saver of the DVD video  
player automatically appears (when Screen Saveris  
set to On43 ). To turn off the screen saver, press the  
PLAY button.  
PAUSE/STEP  
To resume normal playback, press  
the PLAY button.  
Sound is muted during still mode.  
To stop playback  
Automatic Power Off function  
Press STOP.  
If the DVD video player is stopped, or the screen saver  
is engaged for approximately 20 minutes, the DVD  
video player will automatically turn itself off.  
STOP  
To remove the disc  
Press OPEN/CLOSE.  
Remove the disc after the disc tray  
opens completely.  
OPEN/CLOSE  
Be sure to press the OPEN/CLOSE button to close  
the disc tray after you remove the disc.  
Notes  
Do not move the DVD video player during playback. Doing so may damage the disc.  
Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may  
cause the DVD video player to malfunction.  
Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video  
player to malfunction.  
In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen  
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the  
STOP button on your remote control once the movie is completed.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
REV  
Playing a Disc (continued)  
FWD  
You can play discs at various speeds, and resume playback from the location  
where you stopped playback.  
PLAY  
STOP  
PAUSE/STEP  
SLOW  
DVD  
CD  
Playing in fast reverse or fast forward directions  
To resume normal playback  
Press PLAY.  
Press REV or FWD during playback.  
PLAY  
REV  
FWD  
REV: Fast reverse playback  
FWD: Fast forward playback  
Notes  
Each time you press the REV or  
FWD button, the playback speed  
changes.  
The DVD video player mutes sound and omits subtitles  
during reverse and forward scan of DVD video discs.  
However, the DVD video player plays sound during fast  
forward or fast reverse play of audio CDs.  
The playback speed may differ depending on the disc.  
DVD  
Playing frame by frame  
To resume normal playback  
Press PLAY.  
Press PAUSE/STEP during still playback.  
PAUSE/STEP  
Each time you press the PAUSE/  
PLAY  
STEP button, the picture advances  
one frame.  
Note  
The sound is muted during frame by frame playback.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
Playing in slow-motion  
To resume normal playback  
Press PLAY.  
Press SLOW during playback.  
SLOW  
Each time you press the SLOW  
PLAY  
button, the slow-motion speed  
changes.  
Note  
The sound is muted during slow-motion playback.  
DVD  
CD  
Resuming playback from the same location  
To start playback from the beginning regardless  
of the location where you stopped playback  
1 Press STOP twice.  
Press STOP at the location where you  
want to interrupt playback.  
1
2
STOP  
The DVD video player memorizes  
STOP  
The DVD video players memory is  
the location where playback is  
stopped.  
cleared.  
2 Press PLAY.  
Press PLAY.  
PLAY  
DVD  
CD  
Playback starts from the  
beginning of the current title.  
PLAY  
The DVD video player resumes  
playback from the location where  
you stopped playback.  
Playback starts from the  
beginning of the disc.  
If you want to return to the beginning of a DVD video  
disc, open and close the disc tray once with the  
OPEN/CLOSE button before pressing the PLAY  
button.  
Notes  
The DVD video players memory is also cleared when:  
43  
you change the parental lock setting  
41  
or select a disc  
menu language  
.
you open the disc tray.  
There may be a difference in the location where playback  
resumes depending on the disc.  
Settings you changed using the on-screen displays while the  
DVD video player keeps a location in the memory may  
function only after the memory is cleared.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
Locating a Specific Title, Chapter, or Track  
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Audio CDs are divided into  
tracks. You can quickly locate any specific title, chapter, or track.  
DVD video disc  
Title 1  
Title 2  
Audio CD  
Track 3  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Track 1  
Track 2  
Track 4  
Track 5  
DVD  
Locating a title using the top menu  
Press TOP MENU.  
Press ENTER.  
1
TOP MENU  
3
The top menu appears on the TV  
screen.  
Playback starts from chapter 1 of the  
selected title.  
ENTER  
e.g.  
TITLE 1  
TITLE 2  
TITLE 3  
TITLE 4  
Notes  
The instructions above describe basic procedures which  
may vary depending on the contents of the DVD video disc.  
If different instructions appear on the TV screen, follow those  
instructions.  
If you display the top menu during playback and press the  
TOP MENU button again without selecting any title, the DVD  
video player may resume playback from the point where you  
first pressed the TOP MENU button (depending on the actual  
DVD video disc.)  
Press  
want.  
/
/
/
to select the title you  
2
If the titles in the top menu are  
assigned a number, you can directly  
locate a specific title by pressing its  
designated number with the number  
buttons.  
ENTER  
This method of locating a title is available only on a disc that  
contains a top menu.  
Instruction notes of discs may refer to the button that  
displays the top menu as TITLE button.  
DVD  
Locating a title by entering the title number  
Notes  
Press T.  
SEARCH  
T
Pressing the CLEAR button resets the title and chapter  
numbers. To clear the T (Title)and C (Chapter)display,  
press the T button several times.  
This method of locating a title is available only on a disc that  
contains title numbers.  
1
Make sure that the space of T (Title)”  
is highlighted.  
(You can shift the highlight using the  
/
buttons.)  
e.g.  
:
––:–  
1
1
Enter the number for the title you want,  
using  
/
or the number buttons.  
2
3
2
e.g. To select title 2  
To select title 12  
1
2
Press PLAY.  
PLAY  
Playback starts from chapter 1 of the  
selected title.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOP MENU  
SKIP  
PLAY  
/
/
/
ENTER  
CLEAR  
T
Number buttons  
DVD  
CD  
Locating a specific chapter or track directly  
Press T.  
Press PLAY.  
PLAY  
1If you are using an audio CD, skip steps 1 and 2, then  
at steps 3, enter the number for the track you want  
using the number buttons.  
4
Playback starts from the selected  
chapter or track.  
SEARCH  
e.g.  
To select a title and chapter number at the same  
time  
:
––:–  
1
1
T
Perform step 1, and enter a title number you want in the  
space of T (Title)using the number buttons or the  
buttons then perform steps 2 to 4.  
/
Press to highlight the space of “C  
(Chapter).”  
2
3
Note  
e.g.  
Pressing the CLEAR button resets the title and chapter  
numbers. To clear the T (Title)and C (Chapter)display,  
press the T button several times.  
:
–– ––  
:
1
1
ENTER  
Enter the number for the chapter or  
track you want, using  
number buttons.  
When you use the number buttons, you can use  
the +10 button to select numbers from 10 through  
99.  
/
or the  
e.g. To select chapter or track 25  
2
5
+10  
+10  
5
or  
DVD  
CD  
Locating a specific chapter or track  
Notes  
Press SKIP  
or  
repeatedly to display  
Some titles may not display chapter numbers.  
If you press and hold the SKIP or button on the front  
panel during playback, the DVD video player performs fast  
reverse or fast forward playback. You can vary the speed by  
pressing the button repeatedly.  
the chapter or track number you want.  
Playback starts from the selected chapter or track.  
SKIP  
To locate succeeding chapters or tracks  
To locate chapters or tracks during fast reverse or fast  
forward playback, first press the PLAY button to resume  
SKIP  
Playback starts from the beginning of  
normal playback, then use the SKIP  
or  
button.  
the current chapter or track.  
When you press twice, playback starts  
from the beginning of the preceding  
chapter or track.  
When you set Title Stopto Off45 , you can access  
chapters in another title. If you go back to the preceding title  
by pressing the SKIP  
button, the DVD video player  
locates the first chapter of the title. When Title Stopis set  
to On,you can access chapters only within the current title.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Accessing a Specific Location Directly  
You can access a specific location by entering its corresponding time (hours,  
minutes, seconds).  
3
1
2
DVD  
CD  
Entering the time of the desired location  
Notes  
Press T three times.  
• Some discs may not respond to this process.  
• Some scenes may not be located precisely as you specified.  
• This method for accessing specific locations is available  
only within the current title of the DVD video disc or within  
the current track of the audio CD.  
SEARCH  
1
2
You may have to press further  
T
depending on the disc. Press the  
button repeatedly until the clock icon  
is highlighted.  
e.g.  
:
––:–  
1
1
Press the number buttons to enter the  
time.  
e.g.  
1
2
5
3
0
:
:
1
1
1 2 5 3 0  
Press PLAY.  
3
PLAY  
Playback starts from the desired  
location.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Repeatedly  
You can play a specific title, chapter, track, or segment repeatedly.  
(Title repeat, chapter/track repeat, A-B repeat)  
PLAY  
CLEAR  
REPEAT  
A-B RPT  
DVD  
CD  
Repeating a title, chapter, or track  
Press REPEAT.  
Press PLAY.  
1
2
PLAY  
Each time you press the REPEAT  
button, the repeat mode changes as  
follows.  
The DVD video player starts repeat  
playback.  
Press the PLAY button within about  
5 seconds after you press the  
REPEAT button.  
REPEAT  
Chapter Repeat  
DVD  
Chapter Repeat Repeats the current  
chapter.  
To resume normal playback  
Press CLEAR.  
DVD  
Title Repeat  
Repeats the current  
title.  
CLEAR  
CD Track Repeat  
Repeats the current  
track.  
Note  
DVD  
CD  
All Repeat  
Repeats the entire  
disc.  
Some discs may not permit repeat operation.  
Repeat Off  
Resumes normal  
playback.  
DVD  
CD  
Repeating a specific segment  
To resume normal playback  
Press CLEAR.  
Press A-B RPT at the beginning of the  
segment (point A) you want to play  
repeatedly.  
1
2
CLEAR  
A-B RPT  
A  
Notes  
Some discs may not permit A-B repeat operation.  
You cannot set the A-B repeat function for a segment that  
33  
includes multiple camera angles  
.
You can specify a segment only within the current title.  
There may be a slight difference between point A and the  
location where playback actually resumes depending on the  
disc.  
Press A-B RPT again at the end of the  
segment (point B).  
The DVD video player automatically  
A-B RPT  
returns to point A and starts repeat  
playback of the selected segment  
(A-B).  
AB  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Playing in a Favorite Order  
You can combine your favorite titles, chapters, or tracks and play them in the  
order you determine. You can program up to 30 selections into the memory.  
(Memory playback)  
3
/
/
/
2
CLEAR  
2
1
DVD  
CD  
Setting titles, chapters, or tracks in a favorite order  
To change the programmed selections  
1 While the display appears on the TV screen, press  
Insert a disc and press MEMORY during  
stop.  
1
2
/
/
/
to move the highlighted bar to the item  
you want to change.  
2 Change the selection following the instructions in  
MEMORY  
The following display appears.  
e.g.  
step 2.  
:
--  
--  
--  
--  
:
---  
---  
---  
---  
1 T  
CT  
To cancel the programmed selections  
1 While the display appears on the TV screen, press  
:
:
2 T  
CT  
:
:
3 T  
CT  
:
:
4 T  
CT  
/
to move the highlighted bar to the item you  
T: Title number  
CT: Chapter number  
or track number  
:
-- :---  
CT  
-- :---  
CT  
5 T  
want to cancel.  
2 Press CLEAR.  
:
6 T  
:
-- :---  
CT  
7 T  
To resume normal playback from memory  
playback  
Select the items in the order you want  
by pressing the number buttons, then  
ENTER for each item.  
Press CLEAR.  
CLEAR  
The memory playback indicator  
disappears.  
Each time you press the  
/
button, the space  
of Tand CTis highlighted in turn. Highlight  
where you want to enter, then press the  
corresponding number buttons.  
To program during playback  
If you press the MEMORY button during playback, a  
programming display appears.  
To select another chapter in the same title, you do not  
need to select the title number.  
Follow steps 2 and 3.  
To select tracks from an audio CD in order, press the  
number buttons for the track, then press the ENTER  
button for each selection you want.  
Notes  
Some discs may not permit memory playback operation.  
If you press the REPEAT button during memory playback,  
the DVD video player repeats the current memory playback.  
If you press the MEMORY or RETURN button while the  
display appears on the TV screen, the display disappears.  
The programmed selections will be cleared when you turn  
off the DVD video player.  
Note  
The space of T (Title)may be showing a number.  
Neglect this number when using an audio CD.  
Press PLAY while the display appears  
on the TV screen.  
3
The DVD video player starts  
memory playback.  
PLAY  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing in Random Order  
You can play titles, chapters within a title, or tracks in random order.  
(Random playback)  
2
CLEAR  
1
DVD  
CD  
Playing titles, chapters or tracks in random order  
To resume normal playback  
Press CLEAR.  
Press RANDOM.  
RANDOM  
1
Each time you press the RANDOM  
CLEAR  
button, the random playback mode  
changes as follows.  
Notes  
Chapter Random  
Some discs may not permit random playback operation.  
You cannot use the random playback function in conjunction  
with the memory playback function.  
DVD  
Plays chapters within  
the current title in  
random order.  
Chapter Random  
DVD  
CD  
Plays titles in random  
order.  
Title Random  
Track Random  
Plays tracks in  
random order.  
Resumes normal  
playback.  
Random Off  
If you press the RANDOM button  
during playback, the DVD video  
player automatically starts random  
playback after finishing the current  
title, chapter or track.  
Press PLAY.  
2
The DVD video player starts random  
PLAY  
playback.  
Press the PLAY button within about  
5 seconds after you press the  
RANDOM button.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Zooming a Picture  
You can magnify areas within a picture.  
/
/
/
ENTER  
CLEAR  
ZOOM  
DVD  
Zooming a picture  
To resume normal playback  
While ZOOMis selected, press ZOOM repeatedly to  
turn off the icon.  
Picture restores the size when the icon disappears.  
Press ZOOM during normal, slow or still  
playback.  
ZOOM  
The DVD video player enters the  
zoom playback mode and displays  
the icon.  
ZOOM  
e.g.  
The ENTER button cannot cancel zoom playback if  
you have turned off the icon by selecting EXIT.To  
restore normal picture size, press the ZOOM button  
to display the icon, then further press the ZOOM  
button until the icon turns off.  
Notes  
Some discs may not respond to zoom feature.  
During some scenes, the buttons may not work as described.  
Zooming does not work on subtitles or menus included on  
DVD video discs.  
: As you repeatedly press the ENTER  
(or ZOOM) button while ZOOMis  
selected, the magnification level  
changes.  
Variation of the levels includes  
reducing.  
While the icon is displayed, the  
/
/
/
buttons cannot  
work on menus included on DVD video discs. If you want to  
view the menus, turn off the icon.  
The magnification level varies depending on the picture size  
you select. 40  
: If you press the ENTER button while  
EXITis selected, you can turn off  
the icon, keeping the current  
magnification level.  
You can shift the highlight within the  
icon by the  
/
/
/
buttons.  
If you press and hold the  
/
/
/
buttons, the zoom point shifts.  
ENTER  
CLEAR  
Pressing the CLEAR button restores  
the zoom point to the center of the  
picture.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the picture enhancement (E.P.M.*)  
You can easily switch the picture enhancement to your preference.  
2
*E.P.M.: Enhanced Picture Mode  
ENTER  
1, 2  
DVD  
CD  
Selecting the picture enhancement  
To turn off the picture enhancement selection  
Press ENTER.  
Press E.P.M.  
E.P.M.  
1
The picture enhancement selection  
appears.  
Alternatively leave the DVD video  
player unoperated for about 5  
seconds after having made the  
selection.  
ENTER  
Note  
Actual effects to pictures may vary depending on the TV.  
Make the selection to your preference.  
Select the picture enhancement by  
pressing E.P.M. or / .  
2
Each time you press the button, the picture  
enhancement changes.  
Normal:  
Standard black level (7.5 IRE).  
Enhanced Black Level:  
Enhanced Black Level (0 IRE).  
Movie 1:  
To raise brightness to clarify details.  
Movie 2:  
To deepen colors.  
Animation:  
To raise contrast enhancing colors.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Selecting the sound enhancement (E.A.M.*)  
You can easily switch the sound enhancement to your preference.  
2
*E.A.M.: Enhanced Audio Mode  
ENTER  
1, 2  
DVD  
CD  
Selecting the sound enhancement  
To turn off the audio enhancement selection  
Press ENTER.  
Press E.A.M.  
1
E.A.M.  
The sound enhancement selection  
appears.  
Alternatively leave the DVD video  
player unoperated for about 5  
seconds after having made the  
selection.  
ENTER  
Notes  
Actual effects to sounds may vary depending on the  
speakers. Make the selection to your preference.  
Actual effects to sounds may vary depending on the disc.  
When the DVD video player is connected to an amplifier  
equipped with Dolby Pro Logic Surround, select Normal.  
Otherwise, Dolby Pro Logic Surround may function  
differently than usual.  
Selecting Dialoguedisables Dynamic Range Control”  
Select the sound enhancement by  
pressing E.A.M. or / .  
function  
.
40  
2
Spatializer® 3-Dimensional Sound Processing provided by Desper  
Products. Inc.  
Certain audio features of this product manufactured under a license  
from Desper Products, Inc., Spatializer® and the circle-in-square  
device are trademarks owned by Desper Products, Inc.  
Each time you press the button, the sound  
enhancement changes.  
Normal:  
Normal sound.  
3D (N-2-2):  
To obtain expansive virtual surround  
sound effects from just two speakers.  
Dialogue:  
To control dynamic range to make  
dialogues easier to hear (only when  
playing a DVD video disc recorded  
on the Dolby Digital recording  
system).  
To use this enhancement on  
sounds output from the  
BITSTREAM/PCM (DIGITAL)  
AUDIO OUT jack, be sure to set  
40  
Audio Out Selectto PCM.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the Camera Angle  
If the scene was recorded from multiple angles, you can easily change  
the camera angle of the scene you are watching.  
2
1, 2  
CLEAR  
DVD  
Changing the camera angle  
To turn off the angle number display  
Press CLEAR.  
Press ANGLE while playing a scene  
recorded with multiple angles.  
1
CLEAR  
ANGLE  
While playing a scene recorded with  
multiple angles, the angle icon (  
flashes in the DVD display.  
Press the ANGLE button while the  
angle icon is flashing.  
)
Notes  
You can change the camera angle during still playback. The  
camera angle changes to the new setting when you resume  
normal playback.  
e.g.  
If you pause a picture immediately after changing a camera  
angle, the resumed playback picture may not display the new  
camera angle.  
1
2
3
Press ANGLE or  
/
while the angle  
number is displayed on the TV screen.  
2
ANGLE  
Each time you press the ANGLE  
button, the camera angle changes.  
You can change the camera angle  
ENTER  
directly by pressing the number  
buttons corresponding to its angle  
number instead of using the  
buttons.  
/
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Selecting Subtitles  
You can display subtitles on the TV screen and select a subtitle language  
from those included on the DVD video disc.  
/
/
/
SUBTITLE  
CLEAR  
Good evening!  
Bonsoir!  
`Buenas tardes!  
DVD  
Selecting a subtitle language  
To turn subtitles on or off  
1 Press SUBTITLE during playback.  
Press SUBTITLE during playback.  
SUBTITLE  
1
The current subtitle setting is  
SUBTITLE  
displayed.  
e.g.  
2 Press  
/
while the subtitle setting is displayed on  
the TV screen, to select Onor Off.”  
Off  
JP  
FRE 1  
SP  
N
1
ENTER  
A
1
The abbreviation of the language appears instead  
of the language name. Refer to the list of  
languages and their abbreviations. 46  
Notes  
Some DVD video discs are set to display subtitles  
automatically, and you cannot turn them off even if you set  
the subtitle function to off.  
During some scenes, the subtitles may not appear  
immediately after you select On.”  
Some DVD video discs will allow you to make subtitle  
selections and turn subtitles on or off only via the disc menu.  
Press SUBTITLE or  
/
while the subtitle  
setting is displayed on the TV screen.  
2
SUBTITLE  
Each time you press the SUBTITLE  
button, the subtitle languages  
included on the DVD video disc  
change.  
ENTER  
To turn off the subtitle setting display,  
press the CLEAR or ENTER button.  
Notes  
When you turn on the DVD video player or replace a disc, the player returns to the initial default setting 42  
.
When you select a subtitle language which is not included on the disc, the DVD video player plays a prior language  
programmed on the disc.  
During some scenes, the subtitles may not appear immediately after you change the subtitle language.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Language  
You can select a preferred language and sound recording system from those  
included on the DVD video disc.  
2
1, 2  
CLEAR  
Good morning!  
¡Buenos días!  
Bonjour!  
DVD  
Selecting a playback audio setting  
Press AUDIO during playback.  
Press AUDIO or  
/
while the audio  
setting is displayed on the TV screen.  
AUDIO  
1
2
The current audio setting is  
displayed.  
AUDIO  
Each time you press the AUDIO  
button, the audio settings included  
on the DVD video disc change.  
e.g.  
ENG  
1
PCM 2CH  
D 2CH  
ENTER  
ENG2  
If you press the  
/
buttons, you  
can select output sound format. 40  
The abbreviation of the language appears instead  
of the language name. Refer to the list of  
languages and their abbreviations. 46  
To turn off the audio setting display, press the  
CLEAR button.  
Notes  
When you turn on the DVD video player or replace a disc,  
player returns to the initial default setting 42  
.
If you select a sound track which is not included on the disc,  
the DVD video player plays a prior sound track programmed  
on the disc.  
Some discs allow you to change audio selections only via  
the disc menu. If this is the case, press the MENU button  
and choose the appropriate language from the selections on  
the disc menu.  
Output sound conversion table (sampling frequency/quantization bit)  
and output jacks on the rear panel  
Audio selection from the menu 38 40  
Bitstream”  
Analog 2ch”  
PCM”  
Recording system  
Dolby Digital  
Discs  
BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM ANALOG AUDIO  
jack  
OUT jacks  
jack  
OUT jacks  
jack  
OUT jacks  
Bitstream  
48 kHz/20 bit  
Bitstream  
48 kHz/20 bit  
48 kHz/16 bit 48 kHz/20 bit  
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit  
48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit  
48 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit 48 kHz/16 bit  
48 kHz/16 bit  
48 kHz/20 bit  
48 kHz/24 bit  
48 kHz/16 bit  
48 kHz/20 bit  
48 kHz/24 bit  
DVD video  
discs  
Linear PCM  
96 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit  
96 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit  
96 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit  
96 kHz/16 bit 48 kHz/16 bit  
96 kHz/20 bit 48 kHz/16 bit  
96 kHz/24 bit 48 kHz/16 bit  
Bitstream  
Bitstream  
Bitstream  
Bitstream  
DTS  
48 kHz/16 bit  
MPEG1, MPEG2  
Linear PCM 44.1 kHz/16 bit  
DTS  
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit  
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit  
Bitstream  
44.1 kHz/16 bit  
Audio CDs  
(Noise)  
Bitstream  
(Noise)  
Bitstream  
(Noise)  
: 3D (N-2-2) sound enhancement can function.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Operating in the on-screen display mode  
When you turn on the on-screen display, you can view information on operational  
status and access the features and settings on-screen.  
/
ENTER  
DISPLAY  
DVD  
CD  
Operating in the on-screen display mode  
Press DISPLAY.  
DISPLAY  
The following display appears.  
Each time you press the DISPLAY button, the on-screen display changes as follows.  
If you press the  
feature.  
/
buttons to select an icon, then press the ENTER button, you can access the  
When you select an icon ( ), no need to press the ENTER button.  
*
See the pages in  
for details on the features.  
e.g. When playing a DVD video disc  
: Title number (Track number)  
To locate a title or track using the number.  
*
*
*
24  
2
3
0:08:16  
: Chapter number  
To locate a chapter using the number.  
25  
: Elapsed time of the current title  
To enter the time to locate a desired location.  
26  
: Audio setting 35  
: Subtitle setting 34  
: Angle setting 33  
Press DISPLAY again.  
: To turn off the display.  
: Title number (Track number)  
To locate a title or track using the number.  
*
*
*
24  
2
3
-0:21:28  
: Chapter number  
25  
To locate a chapter using the number.  
: Remaining time of the current title  
To enter the time to locate a desired location.  
26  
32  
: E.A.M. (Enhanced Audio Mode) setting  
31  
: E.P.M. (Enhanced Picture Mode) setting  
30  
: To zoom a picture.  
Press DISPLAY again.  
40  
: Audio Out Selectsetting  
BST: Bitstream 2CH: Analog 2ch PCM: PCM  
: To turn off the display.  
(continued)  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
: Title number (Track number)  
To locate a title or track using the number.  
*
*
24  
2
3
: Chapter number  
To locate a chapter using the number. 25  
: To stop playback. 21  
: Playback starts from the beginning of the  
current chapter or track.  
25  
: Fast reverse playback 22  
: To start playback. 20  
: Fast forward playback 22  
: To locate succeeding chapters or tracks. 25  
: To slow motion playback. 23  
: To pause playback. 21  
Press DISPLAY again.  
: To turn off the display.  
The on-screen display will vary depending on the disc.  
:
:
0 0 8 1 6  
9.6  
2
3
DVD  
: Data transfer rate (Mbit/s)  
= Amount of picture, sound and subtitle data in the  
DVD video disc transferred per second.  
The larger the value is, the more data processed,  
but this does not necessarily insure better picture  
quality.  
CD  
: CD-Text  
Displays CD-Text data if included on the audio  
CDs. (Some letters may not be displayed properly  
depending on the disc.)  
OFF  
To turn off the on-screen display, press  
DISPLAY again.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings  
2
You can change the default settings to customize performance to your  
preference.  
RETURN  
3, 4  
1, 6  
DVD  
CD  
Setting procedure  
Press  
/
to select the setting you  
Press SETUP during stop.  
want to change, then press ENTER.  
1
3
4
The following on-screen display  
appears.  
SETUP  
ENTER  
ENTER  
Picture  
TV Shape 4:3 LB  
Change the selection by  
buttons, by referring to the  
corresponding pages  
ENTER.  
/
or other  
39  
, then press  
Press  
/
to select a symbol for the  
setting you want to change.  
2
(See the next page.)  
ENTER  
ENTER  
ENTER  
Repeat steps 3 and 4 to change other  
settings.  
To select another operation, go back to step 2.  
5
6
Picture performance settings  
Press SETUP.  
Output sound settings  
Language settings  
Display settings  
SETUP  
The on-screen display disappears.  
To return to the previous display  
Press RETURN.  
RETURN  
Operational settings  
Initial settings  
Notes  
• The on-screen display disappears when you press the  
SETUP button.  
• The SETUP button can function even during normal  
playback, however some operations may be inaccessible,  
and a message will appear. In this case, try again after  
playback is stopped.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Details  
Page  
DVD  
TV Shape  
To select a picture size according to the aspect  
ratio of your TV.  
40  
DVD  
CD  
Audio Out Select  
To select an output sound format corresponding 40  
to your system connection.  
DVD  
Dynamic Range Control  
To turn on or off a function that makes faint  
sounds easier to hear even if you lower the  
volume during late hours playback.  
40  
DVD  
Karaoke Vocal  
To turn on or off the vocal output during DVD  
KARAOKE disc playback.  
41  
DVD  
CD  
On-Screen Language  
Disc Menu Language  
Audio Language  
To select a preferred language for on-screen  
displays.  
41  
41  
42  
42  
DVD  
DVD  
DVD  
To select a preferred language for disc menus.  
To select a preferred language for the sound  
track.  
Subtitle Language  
To select a preferred language for subtitles.  
DVD  
CD  
On-Screen Displays  
Background  
To turn on or de-activate the operational status  
display on the TV screen.  
43  
43  
43  
DVD  
CD  
To select the background color or background  
picture.  
DVD  
Screen Saver  
To turn the screen saver on or off.  
DVD  
DVD  
DVD  
Pause/Still  
Parental Lock  
Title Stop  
To select the resolution of still pictures.  
(Field/Frame)  
43  
43  
45  
To turn the parental lock function on or off.  
To turn on or off a feature that automatically  
stops playback after a title has been viewed.  
DVD  
CD  
On-screen Language  
TV Shape  
Audio Out Select  
To install the initial system setting.  
45  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
Audio  
Audio Out Select  
Dynamic Range Control On  
Picture  
TV Shape 4:3 LB  
Bitstream  
Karaoke Vocal  
Off  
DVD  
DVD  
CD  
TV Shape  
Audio Out Select  
4:3 Letterbox:  
Select when a standard 4:3 TV is  
connected.  
Select the output sound format corresponding to your  
system connection.  
35  
Displays theatrical images with  
masking bars above and below the  
picture.  
For details of sound recording systems, see  
.
Bitstream:  
Select when connected to an amplifier  
equipped with a Dolby Digital, DTS,  
18 19  
MPEG1 or MPEG2 decoder.  
4:3 Normal:  
Select when a standard 4:3 TV is  
connected.  
Displays pictures cropped to fill  
your TV screen. Either or both  
sides of the picture are cut off.  
The DVD video player outputs digital  
audio information in the bitstream  
format when you play a DVD video disc  
recorded on the Dolby Digital, DTS,  
MPEG1 or MPEG2 recording system.  
Analog 2ch: Select when connected to a TV, or  
Dolby Pro Logic or stereo system via  
the analog audio jacks. 16 17 18  
16:9 Widescreen: Select when a 16:9 wide TV is  
connected.  
Notes  
The displayable picture size is preset on the DVD video  
disc. Therefore, the playback picture of some DVD  
video discs may not conform to the picture size you  
select.  
When you play DVD video discs recorded in the 4:3  
picture size only, the playback picture always appears  
in the 4:3 picture size regardless of the TV shape  
setting.  
PCM:  
Select when connected to a 2 channel  
19  
digital stereo amplifier.  
The DVD video player outputs sounds  
in the PCM 2ch format when you play a  
DVD video disc recorded on the Dolby  
Digital, MPEG1 or MPEG2 recording  
system.  
If you select 16:9 Widescreenand you own a 4:3 TV  
set, the DVD playback picture will be horizontally  
distorted during playback. Images will appear to be  
horizontally compressed. Always be sure that your TV  
shape conforms to the actual TV in use.  
DVD  
Dynamic Range Control  
Off: Full dynamic range is maintained.  
On: Dynamic range is reduced.  
Notes  
This function works only during playback of Dolby  
Digital recorded discs.  
The level of Dynamic Range Reduction may differ  
depending on the DVD video disc.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
Karaoke Vocal  
Language  
On-Screen Language ENG  
Disc Menu Language ENG  
Audio Language  
Subtitle Language  
Off: The primary vocal is not output.  
On: The primary vocal is output when it is recorded  
on the disc.  
ENG  
– – –  
Notes  
The vocal output feature is used during playback of  
Dolby Digital (multi-channel) recorded DVD KARAOKE  
discs. This feature allows you to turn off vocal audio  
tracks, or restore them for background  
accompaniment.  
DVD  
CD  
On-Screen Language  
When playing KARAOKE, connect appropriate audio  
equipment such as an amplifier to the DVD video  
player.  
English: To view on-screen displays in English.  
Français:To view on-screen displays in French.  
Español: To view on-screen displays in Spanish.  
DVD  
Disc Menu Language  
English: To display disc menus in English.  
French: To display disc menus in French.  
Spanish To display disc menus in Spanish.  
Others: To make a further choice.  
After pressing the ENTER button, follow  
steps 1) - 4) below.  
1) Obtain the abbreviation of the preferred  
language from the list 46  
.
2) Select the first character by pressing the  
buttons.  
/
3) Press the  
/
buttons to shift and select the  
second character by pressing the  
/
buttons.  
Language  
On-Screen Language ENG  
Disc Menu Language ENG  
English  
French  
Audio Language  
Subtitle Language  
ENG  
– – –  
Spanish  
Others  
Code  
S
E
4) Press the ENTER button.  
Note  
Some DVD video discs may not include your pre-  
selected language. In this case, the DVD video player  
automatically displays disc menus consistent with the  
discs initial language setting.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
3) Press the  
/
buttons to shift and select the  
DVD  
Audio Language  
second character by pressing the  
/
buttons.  
English: To play sound tracks in English.  
French: To play sound tracks in French.  
Spanish: To play sound tracks in Spanish.  
Others: To make a further choice.  
After pressing the ENTER button, follow  
steps 1) - 4) below.  
Language  
On-Screen Language ENG  
Disc Menu Language ENG  
Audio Language  
Subtitle Language  
English  
French  
Spanish  
No Subtitle  
Others  
ENG  
– – –  
1) Obtain the abbreviation of the preferred  
Code  
A
A
46  
language from the list  
.
2) Select the first character by pressing the  
buttons.  
/
3) Press the  
/
buttons to shift and select the  
4) Press the ENTER button.  
second character by pressing the  
/
buttons.  
Notes  
Some DVD video discs may be set to display subtitles  
in a different language than you selected. A prior  
subtitle language may be programmed on the disc.  
Some DVD video discs allow you to change subtitle  
selections only via the disc menu. If this is the case,  
press the MENU button and choose the appropriate  
subtitle language from the selection on the disc menu.  
Language  
On-Screen Language ENG  
Disc Menu Language ENG  
Audio Language  
Subtitle Language  
English  
French  
Spanish  
ENG  
– – –  
Others  
Code  
S
E
4) Press the ENTER button.  
Note  
Some DVD video discs may be played in a different  
language than you selected. A prior language may be  
programmed on the disc.  
DVD  
Subtitle Language  
English:  
French:  
Spanish:  
To display subtitles in English.  
To display subtitles in French.  
To display subtitles in Spanish.  
No Subtitle: To disable subtitles.  
Others:  
To make a further choice.  
After pressing the ENTER button,  
follow steps 1) - 4) below.  
1) Obtain the abbreviation of the preferred  
46  
language from the list  
.
2) Select the first character by pressing the  
buttons.  
/
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
On-Screen Displays On  
Operation  
Pause/Still  
Auto  
Off  
Off  
Background  
Screen Saver  
Gray  
On  
Parental Lock  
Title Stop  
DVD  
CD  
DVD  
On-Screen Displays  
Pause/Still  
Auto:  
For normal use. Still and fast motion images  
can be paused.  
Off: Operational modes (e.g. “ ”, “  
displayed.  
) are not  
Frame: The resolution of still pictures is improved,  
so that you can make a motionless picture  
more clearer when you pause it.  
On: Operational modes (e.g. “ ”, “  
displayed on-screen.  
) are  
DVD  
CD  
Background  
DVD  
Parental Lock  
Blue:  
Gray:  
Blue background.  
Gray background.  
DVD video discs equipped with the parental lock  
function are rated according to their content. The  
contents allowed by a parental lock level and the way  
a DVD video disc can be controlled may vary from  
disc to disc. For example, if the disc allowed you  
could edit out violent scenes unsuitable for children  
and replace them with more suitable scenes, or lock  
out playback of the disc altogether.  
Picture: To use the picture which appears when you  
turn on the DVD video player as a  
background.  
Jacket: To use the jacket picture included on some  
discs as a background. If it is not included,  
a gray background will be substituted.  
DVD  
Screen Saver  
DVD video discs may or may not respond to the  
parental lock settings. This is not a defect in the DVD  
video player. Make sure this function works with your  
DVD video discs.  
Off: The screen saver is disengaged.  
On: The screen saver operates.  
Off: The parental lock feature does not function.  
After pressing the ENTER button, follow step 1)  
below.  
On: To activate the parental lock feature or change  
the settings.  
After pressing the ENTER button, follow steps  
1) - 3) below.  
Operation  
Pause/Still  
Parental Lock  
Title Stop  
Auto  
Off  
Off  
Off  
On  
Security Code  
– – – –  
(Continued)  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings (continued)  
Setting details  
(Continued)  
1) Press the number buttons to create a personal  
3) Press the  
/
buttons to select the parental  
lock level, then press the ENTER button.  
4-digit security code, then press the ENTER  
button.  
Operation  
If you make a mistake before pressing the  
ENTER button, press the CLEAR button and  
enter your 4-digit security code again.  
Pause/Still  
Parental Lock  
Title Stop  
Auto  
Off  
Off  
Area Code  
Level  
S
U
7
2) Enter the code of a country/area whose  
standards were used to rate the DVD video  
disc, referring to the list below.  
You cannot play DVD video discs rated higher than  
the level you selected unless you cancel the parental  
lock function.  
For example, when you select level 7, discs rated  
higher than level 7 are locked out and cannot be  
played.  
Country/Area  
AUSTRALIA  
BELGIUM  
CANADA  
CHINA  
CHINA HONG KONG  
DENMARK  
FINLAND  
Code  
AU  
BE  
CA  
CN  
HK  
DK  
FI  
The parental lock level is equivalent to the following  
USA movie ratings.  
Level 7: NC-17  
Level 6: R  
Level 4: PG 13  
Level 3: PG  
FRANCE  
FR  
DE  
ID  
GERMANY  
INDONESIA  
ITALY  
IT  
JAPAN  
MALAYSIA  
JP  
Level 1: G  
MY  
NL  
NO  
PH  
RU  
SG  
ES  
SE  
CH  
TW  
TH  
GB  
US  
NETHERLANDS  
NORWAY  
PHILIPPINES  
RUSSIAN FEDERATION  
SINGAPORE  
SPAIN  
SWEDEN  
SWITZERLAND  
TAIWAN  
The parental lock levels for other countries/areas  
than U.S. are included for future use. Check the  
appropriate parental lock level when you buy a DVD  
video disc equipped with the parental lock feature in  
the future.  
To change the parental lock level  
Follow steps 1) - 3).  
THAILAND  
UNITED KINGDOM  
UNITED STATES  
To change your 4-digit security code  
1) After selecting Onor Off,press the STOP  
button four times, then press the ENTER  
button.  
a) Select the first character by pressing the  
buttons.  
b) Press the  
/
STOP  
STOP  
STOP  
STOP  
/
buttons to shift and select  
ENTER  
the second character by pressing the  
buttons.  
/
c) Press the ENTER button.  
The 4-digit security code is cleared.  
2) Press the number buttons to create a new  
4-digit security code.  
3) Press the ENTER button.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
Title Stop  
Initial Setup  
On-Screen Language ENG  
Off: The DVD video player continues after playback  
of a title is completed.  
TV Shape  
4:3 LB  
Bitstream  
Audio Out Select  
On: The DVD video player stops after playback of a  
title is completed.  
DVD  
CD  
Initial Setup  
1) Press the  
/
buttons to select On-Screen  
Language,and press the ENTER button.  
ENTER  
ENTER  
2) Select a language pressing the  
/
buttons,  
and press the ENTER button.  
See page 41 , On-screen Language.”  
ENTER  
ENTER  
3) Make your selection in the same manner as  
step 1) then step 2).  
40  
See page  
, TV Shape.”  
See page 40 , Audio Out Select.”  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Table of Languages  
Table of languages and their abbreviations  
Abbreviation  
Language  
Abbreviation  
Language  
Abbreviation  
Language  
– – –  
No alternate  
language  
Chinese  
Dutch  
English  
French  
German  
Italian  
Japanese  
Korean  
GN  
GU  
HA  
HI  
HR  
HU  
HY  
IA  
IE  
IK  
IN  
IS  
Guarani  
Gujarati  
Hausa  
Hindi  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
Indonesian  
Icelandic  
Hebrew  
PT  
QU  
RM  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Portuguese  
Quechua  
Rhaeto-Romance  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
CHI (ZH)  
DUT (NL)  
ENG (EN)  
FRE (FR)  
GER (DE)  
ITA (IT)  
JPN (JA)  
KOR (KO)  
MAY (MS)  
SPA (ES)  
AA  
Sango  
Malay  
Spanish  
Afar  
Serbo-Croatian  
Singhalese  
Slovak  
Slovenian  
Samoan  
Shona  
IW  
JI  
SK  
SL  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
EO  
ET  
EU  
FA  
FI  
FJ  
FO  
FY  
GA  
GD  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Belorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
Bhutani  
Greek  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Faroese  
Frisian  
Yiddish  
JW  
KA  
KK  
KL  
KM  
KN  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Kashmiri  
Kurdish  
Kirghiz  
Latin  
Lingala  
Laotian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Maltese  
Burmese  
Nauru  
Nepali  
Norwegian  
Occitan  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
TK  
TL  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Telugu  
Tajik  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tongan  
Turkish  
Tsonga  
Tatar  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapük  
Wolof  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MT  
MY  
NA  
NE  
NO  
OC  
OM  
OR  
PA  
PL  
PS  
(Afan) Oromo  
Oriya  
Panjabi  
Polish  
Pashto, Pushto  
Irish  
Scottish Gaelic  
Galician  
Xhosa  
Yoruba  
Zulu  
GL  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Calling Service Personnel  
Check the following guide for the possible cause of a problem before contacting service.  
Symptoms and correction  
Symptom  
Cause  
Correction  
Page  
No power.  
The power plug is disconnected.  
Connect the power plug securely into the  
wall outlet.  
16  
The DVD video player turned The automatic power off function turned  
Press the PLAY button.  
21  
20  
off by itself.  
the unit off.  
No picture.  
The TV is not set to receive DVD signal  
output.  
Select the appropriate video input mode  
on the TV so the picture from the DVD  
video player appears on the TV screen.  
The video cable is not connected securely. Connect the video cable securely into the 16, 17  
appropriate jacks.  
No sound.  
The equipment connected with the audio  
cable is not set to receive DVD signal  
output.  
Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD video player.  
20  
The audio cable is not connected securely. Connect the audio cable securely into the 16, 17  
appropriate jacks.  
18, 19  
20  
The audio receiver or TV is turned off.  
Turn on the equipment connected with  
the audio cable.  
The setting of output sound format is  
incorrect.  
Select the proper audio setting.  
35, 38  
40  
The playback picture has  
occasional distortion.  
The disc is dirty.  
Eject the disc and clean it.  
9
It is in fast forward or fast reverse  
playback.  
Sometimes a small amount of picture  
distortion may appear. This is not a  
malfunction.  
Brightness is unstable or  
noises are present in the  
playback pictures.  
The effect of copy protection.  
Connect the DVD video player directly to  
the TV. Avoid connecting the DVD video  
player to a VCR or TV/VCR combination.  
16  
The DVD video player does  
not start playback.  
No disc is inserted.  
Insert a disc.  
20  
10  
An unplayable disc is inserted.  
Insert a playable disc. (Check the disc  
type and color system.)  
The disc is placed upside down.  
Place the disc with the playback side  
down.  
20  
20  
The disc is not placed within the guide.  
Place the disc correctly inside the guide  
on the disc tray.  
The disc is dirty.  
Clean the disc.  
9
The parental lock function is set.  
Cancel the parental lock function or  
change the parental lock level.  
38, 43  
Playback does not follow the  
course of the discs program.  
It is in the mode of repeat playback,  
memory playback, etc.  
These operations may prevent a proper  
progress of the contents.  
Buttons do not work.  
Power supply fluctuations or other  
abnormalities such as static electricity may  
interrupt correct operations.  
Turn the power on or off with the Power  
button. Or disconnect the power plug and  
insert it into the wall outlet again.  
The remote control does not  
work properly.  
The remote control is not pointed at the  
remote sensor of the DVD video player.  
Point the remote control at the remote  
sensor of the DVD video player.  
15  
15  
15  
The remote control is too far from the DVD Operate the remote control within about  
video player.  
7 m.  
The batteries in the remote control are  
exhausted.  
Replace the batteries with new ones.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Specifications  
DVD video player / outputs / supplied accessories  
DVD Video Player  
Power supply  
Power consumption  
Mass  
120 V AC, 60 Hz  
14 W  
2.3 kg  
External dimensions  
Signal system  
Laser  
430 × 81 × 225 mm (W/H/D)  
Standard NTSC  
Semiconductor laser, wavelength 650 nm  
Frequency range  
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz  
96 kHz sampling 4 Hz to 44 kHz  
Signal-to-noise ratio  
Audio dynamic range  
Harmonic distortion  
Wow and flutter  
More than 112 dB  
More than 108 dB  
Less than 0.002 %  
Below measurable level (less than 0.001 % (W.PEAK))  
Temperature: 5 °C to 35 °C, Operation status: Horizontal  
Operating conditions  
Outputs  
Video output  
1.0 V (p-p), 75 , negative sync., pin jack × 1  
S video output  
(Y) 1.0 V (p-p), 75 , negative sync., Mini DIN 4-pin × 1  
(C) 0.286 V (p-p), 75 Ω  
Component video output  
(Y) 1.0 V (p-p), 75 , negative sync., pin jack × 1  
(PB)/(PR) 0.7 V (p-p), 75 , pin jack × 2  
Audio output (BITSTREAM/PCM)  
Audio output (ANALOG)  
0.5V (p-p), 75 , pin jack × 1  
2.0 V (rms), 220 , pin jacks (L, R) × 1  
Supplied Accessories  
Audio/video cable ............................................................................................................. 1  
Remote control (SE-R0049 (SD-400V), SE-R0047 (SD-K600))....................................... 1  
Batteries (AA) ................................................................................................................... 2  
Power cord ....................................................................................................................... 1  
Designs and specifications are subject to change without notice.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY DVD VIDEO PLAYER  
Toshiba America Consumer Products, Inc. (TACP), Toshiba Hawaii (THI) and Toshiba Canada Limited (TCL) make the  
following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from  
the original purchaser and to no other purchaser or transferee.  
Limited Ninety (90) Day Warranty  
Commercial Units  
Products sold and used for commercial use have a limited  
ninety (90) day warranty for all parts and labor.  
TACP/THI warrant this product against defects in materials  
or workmanship for a period of ninety (90) days after the  
date of original retail purchase. During this period, TACP/  
THI will repair or replace a defective product or part, at their  
option, with a new or refurbished product or part without  
charge to you. You must deliver the entire product to a  
TACP/THI Authorized Service Station. You are responsible  
for all transportation and insurance charges for the unit to  
and from the Authorized Service Station. If you live in the  
U.S.A. you may, at your option, return your DVD Unit to:  
Toshiba America Consumer Products Inc.  
Owners Manual  
You should read the owners manual thoroughly before  
operating this product. You should complete and mail the  
enclosed Demographic card within ten (10) days after you,  
or the person who has given you this product as a gift,  
purchased this product. This is one way to enable TACP to  
provide you with better customer service and improved  
products. Failure to return the card will not affect your rights  
under this warranty.  
Returns Center  
1420C Toshiba Dr.  
Lebanon, TN 37087  
Your Responsibility  
Upon receipt we will, at our option, exchange the DVD Unit  
with a new or refurbished unit. Canadian consumers are  
requested to contact TCL. In Hawaii consumers are  
requested to contact THI.  
The above warranties are subject to the following  
conditions:  
(1) You must retain your bill of sale or provide other proof of  
purchase.  
(2) You must notify a TACP/THI/TCL /Authorized Service  
Station within thirty (30) days after you discover a  
defective product or part.  
(3) All warranty servicing of this product must be made by a  
TACP/THI/TCL Authorized Service Station.  
(4) U.S.A. warranties are effective only if the product is  
purchased and operated in the Continental U.S.A. or  
Puerto Rico.  
(5) Labor service charges for set installation. Set up,  
adjustment of customer controls and installation or  
repair of antenna systems are not covered by this  
warranty. Reception problems caused by inadequate  
antenna systems are your responsibility.  
(6) Warranties extend only to defects in materials or  
workmanship as limited above and do not extend to any  
product or parts which have been lost or discarded by  
you or to damage to products or parts caused by  
misuse, accident, damage caused by Acts of God, such  
as lighting or fluctuations in electric power, improper  
installation, improper maintenance or use in violation of  
instructions furnished by us; or to units which have been  
altered or modified without authorization of TACP/THI/  
TCL or to damage to products or part thereof which  
have had the serial number removed, altered, defaced  
or rendered illegible.  
Limited One (1) Year Warranty  
TACP/THI further warrant the parts in this product against  
defects in materials or workmanship for a period of one (1)  
year after the date of original retail purchase. During this  
period, TACP/THI will repair or replace a defective product  
or part, at their option, with a new or refurbished product or  
part without charge to you, except that if a defective part is  
replaced after ninety (90) days from the date of the original  
retail purchase you pay labor charges involved in the  
replacement. You must also deliver the entire product to a  
TACP/THI Authorized Service Station. You are responsible  
for all transportation and insurance charges for the unit to  
and from the Authorized Service Station. If you live in the  
U.S.A. you may, at your option, return your DVD Unit to:  
Toshiba America Consumer Products Inc.  
Returns Center  
1420C Toshiba Dr.  
Lebanon, TN 37087  
Upon receipt we will, at our option, exchange the DVD Unit  
with a new or refurbished unit. Canadian Consumers are  
requested to contact TCL. In Hawaii consumers are  
requested to contact THI.  
Rental Units  
The warranty for rental units begin with the first rental or  
thirty (30) days from the date of shipment to the rental firm,  
whichever comes first.  
(7) Should you elect to return your DVD Unit to TACP after  
the ninety (90) days and within one (1) year, or after the  
warranty period has expired: Call (800)-631-3811 to  
receive information concerning an exchange price.  
Payment must be enclosed with product in the form of a  
certified check or money order including reason for  
return.  
(8) Physically damaged DVD Units are not acceptable for  
repair or exchange whether in or out of warranty and  
will be returned as received.  
(Continued)  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
LIMITED WARRANTY DVD VIDEO PLAYER (continued)  
How to Obtain Warranty Service  
(1) Refer to the troubleshooting guide in your owners manual. This check list may solve your problem.  
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30)  
days after you find a defective product or part.  
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center.  
Products shipped to the Service Station must be insured and safely and securely packed, preferably in the original  
shipping carton, and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be  
enclosed.  
In Canada contact:  
Consumer Electronics Group  
191 McNabb Street  
Markham, Ontario L3R 8H2  
(905)-470-5400  
In the Continental United States contact:  
In Hawaii contact:  
Toshiba Hawaii Inc.  
327 Kamakee Street  
Honolulu, HA 96814  
(808)-521-5377  
Consumer Electronics Group  
22171 Fraserwood Way  
Richmond, B.C. V6W 1J5  
(604)-303-2500  
Toll Free  
800-631-3811  
Consumer Electronics Group  
1643 North Service Road  
Droval, QC H9P 1J1  
(514)-856-4100  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are  
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state  
law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and  
similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI  
be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in  
any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising  
under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days  
from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising  
under state law.  
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some  
states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or  
limitation of incidental or consequential damages, so the above provisions may not apply to you.  
ATTENTION CANADIAN CONSUMERS:  
Canadian consumers are requested to complete the special Canadian Warranty Registration Formenclosed, and forward  
this completed form with a copy of bill of sale to TOSHIBA OF CANADA to Register and Validatetheir warranty. Product  
must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not  
covered by these warranties.  
IMPORTANT: PACKING AND SHIPPING INSTRUCTION  
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the  
original carton box containing the unit into another carton using more packing material.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tektronix Sprinkler TDS500D User Manual
Texas Instruments Drums DAC7716EVM User Manual
Troy Bilt Lawn Mower 13034 User Manual
Troy Bilt Trimmer TB32CS User Manual
Vision Fitness Treadmill T9800 User Manual
Vornado Electric Heater TAVH10 User Manual
VTech Two Way Radio VT 1511 User Manual
Wagner SprayTech Paint Sprayer B_04001 User Manual
Waring Oven CO900B User Manual
Weber Gas Grill 55268 User Manual