Others
DEUTSCH (D)
ENGLISH (E)
Specifications
DVD video player / Outputs / Supplied accessories
DVD video player
Power supply
230~240 V AC, 50 Hz
Operation: 12 W
Standby: 3 W
Power consumption
DIGITAL VIDEO
DVD-VIDEOSPIELER DVD VIDEO PLAYER
Mass
2.0 kg
External dimensions
Width: 430 mm
Height: 59 mm
SD-190ESE
Depth: 206 mm
Signal system
Laser
PAL, NTSC
BEDIENUNGSANLEITUNG
OWNER’S MANUAL
Semiconductor laser, wavelength 650/780 nm
Frequency response
DVD: 4 Hz
-
22 kHz
CD: 4 Hz
-
20 kHz
Harmonic distortion
Wow and flutter
0.008 %
Below measurable level
Operating conditions
Temperature: 5 °C to 40 °C, Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin socket x 1
(Y) 1.0 V (p-p), 75 Ω, pin socket x 1
Component video output
(PB)/(PR) 0.7 V (p-p), 75 Ω, negative sync., pin sockets x 2
–12 dBm, 1 k Ω, pin sockets (L, R) x 1
Audio output (ANALOG)
Audio/Video output (SCART)
Audio: –12 dBm, 1 k Ω, Video: 1.0 V (p-p), 75
RGB: 0.7 V (p-p), 75 , SCAR T socket x 1
Audio output (DIGITAL OPTICAL)
Optical connector x 1
Supplied accessories
Remote control ..................................................... 1
Batteries (R03/AAA) ............................................. 2
• Designs and specifications are subject to change without notice.
©2004 Toshiba Corporation
Bevor Sie das Gerät in Betrieb nehmen, lesen Sie bitte diese Bedienungsanleitung.
Before operating the unit, please read this manual thoroughly.
04/03
U
SAFETY PRECAUTIONS
SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT
INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.
E
This equipment has been designed and manufactured to meet international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the best results and safety is to be assured.
CAUTION:
This Digital Video Disc Player employs a Laser System.
**************
To ensure proper use of this product, please read this owner’s manual carefully and retain for
future reference. Should the unit require maintenance, contact an authorized service location
-see service procedure.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter- connections between
the pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and
withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
**************
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc.
Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases,
to be placed on the equipment.
CLASS 1
LASER PRODUCT
DON’T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to equipment.
High temperatures can melt plastic and lead to fires.
DON’T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety always fit the
manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic
safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for
unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that your
family know how to do this. Special arrangements may need to be made for infirm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any
way -switch off, withdraw the mains plug and consult your dealer.
CAUTION:
Servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video
player.
Model No.
Serial No.
Retain this information for future reference.
Location of the required label
ABOVE ALL
—NEVER let anyone especially children push anything into holes, slots or any other opening in the case -
this could result in a fatal electrical shock;
—NEVER guess or take chances with electrical equipment of any kind
—it is better to be safe than sorry!
The rating plate and the safety caution are on the rear of the unit.
*************
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i)
fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out
in the owner’s manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simulta-
neously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including
but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused
during normal operation or misuse of the product.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of controls
E
See the page in
for details.
FL display
Front panel
TRACK indicator (TRACK)
CD indicator (CD)
DVD indicator (DVD)
Repeat mode indicators
(ALL REPEAT, REPEAT, REPEAT A B)
DVD CD
TRACK
ALL
REPEAT
A
B
Play indicator (
)
)
Message or number indicator
(Title, chapter, track, playing time or other information)
Pause indicator (
Rear panel
The display may vary depending on the types of discs you play.
DVD video disc
Video CD
Audio CD
•
During playback:
•
During playback:
Example
•
During playback:
Example
Example
DVD
CD
TRACK
Playing track 1
Playing track 6
Some discs may not display elapsed
time.
Some discs may not display track
numbers or elapsed time.
Some discs may not display track
numbers or elapsed time.
8
9
Introduction
Identification of controls (continued)
E
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Loading batteries
Operating with the remote control
Remote control
Slide the battery compartment cover in the
direction of the arrow.
Point the remote control at the remote
sensor and press the buttons.
1
Within approx. 7 m
Install two “R03/AAA” batteries (supplied), paying
attention to the polarity diagram in the battery
compartment.
2
Distance:Approx. 7 m from the front of the remote
sensor
Angle: Approx. 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the DVD video
player to a strong light source such as direct sunlight
or other illumination. If you do so, you may not be able
to operate the DVD video player via the remote
control.
Replace the compartment cover.
3
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
video player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote control.
• Do not disassemble the remote control.
• When using the remote control, press the button at intervals
of approx. 1 second to ensure the correct mode of operation.
Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries. Do
not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of time,
remove the batteries to avoid possible damage from battery
corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries with
new ones.
MENU button
Use the MENU button to display the menu
included on many DVD video discs.
To operate a menu, follow the instructions
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
23
in “DVD menu.”
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV
E
Connect the DVD video player to your TV.
Component video outputs/inputs
PROGRESSIVE outputs/inputs
34
For details of output sound, see
.
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
INTERLACED outputs/inputs
Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination
or video selector, the playback picture may be distorted as DVD video discs are copy protected.
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality
DVD picture playback.
Connecting to a TV (Using the SCART socket)
Connecting to an audio system and TV equipped with component video inputs
SCART lead (not supplied)
Signal flow
Signal flow
•
•
Normal TV
RGB monitor
To AV (SCART) output
If the TV has the Component
input, connect the DVD video
player with the Component
lead. When using the
Component lead, do not
connect the yellow video lead.
To AUDIO OUT
(red)
(white)
To SCART input
• Make the following setting.
To wall outlet
Audio lead
(not supplied)
To PB
VIDEO
OUT
To PR
VIDEO
OUT
To Y
VIDEO
OUT
Connecting to a TV (Using the phono type sockets)
TV or monitor with
ColorStream®
component video inputs
To audio inputs
of the amplifier
Signal flow
Normal TV
To Y video input
To PB video input
To PR video input
(white)
(red)
Component video lead (not supplied)
To audio input
(white/red)
To video input
(yellow)
Audio system
• Make the following setting
To AUDIO OUT
(L:white, R:red)
To VIDEO OUT
(yellow)
Audio/video lead (not supplied)
• Make the following setting.
Notes:
• Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
• In some TVs or monitors, the colour levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
Notes:
• In connecting to a TV using the SCART or video socket, do not select “Progressive” in “Output” menu. If you do it, the
SCART or video output does not feed the correct signals and you can not see any picture
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from
the wall outlet before making any connections.
Notes:
34
.
• In connecting to a TV that are not capable of reproducing a progressively scanned video signal using the component
sockets, do not select “Progressive” in “Output” menu. If you do it, the component video outputs does not feed the
correct signals and you can not see any picture 34
.
• Refer to the owner’s manual of the connected equipment as well.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s mains lead. If you leave the amplifier power on,
the speakers may be damaged.
• If your television set has one audio input, connect the DVD video player to a Y lead adapter (not supplied) and then connect
to your TV.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s mains lead. If you leave the amplifier power
on, the speakers may be damaged.
12
13
Connections
Connecting to optional equipment
• This section uses the following reference mark.
E
You can enjoy high quality dynamic sounds by connection the DVD
video player to optional audio equipment.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
For connection to your TV, see “Connecting to a TV”
.
Warning
When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo
sockets. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT (L/R)
sockets of the DVD video player are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R)
leads dangling.) To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system
must be connected to the OPTICAL DIGITAL AUDIO OUT socket or of the DVD video player.
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this
realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by
connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you
have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-
channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with
an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with a
Dolby Digital decoder
To OPTICAL
type digital
audio input
Amplifier equipped with an
MPEG2 audio decoder
Manufactured under license
from Dolby Laboratories.
To OPTICAL
type digital
audio input
Optical digital lead (not supplied)
“Dolby”, “Pro Logic”, and the
double-D symbol are trademarks
of Dolby Laboratories.
Optical digital lead (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and
speaker system (right and left front speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to
that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
•
This connection is only suitable for Video CDs and Audio CDs.
Amplifier equipped with
Dolby Surround Pro Logic
Amplifier equipped with
a digital audio input
*
To OPTICAL
type digital
audio input
To audio input
Connect one or two rear
*
To AUDIO OUT
speakers. The output sound
from the rear speakers will
be monaural even if you
connect two rear speakers.
Optical digital lead (not supplied)
Audio lead (not supplied)
Connecting to an amplifier equipped with a DTS decoder
Notes:
• DO NOT connect the OPTICAL DIGITAL AUDIO OUT socket of the DVD video player to the AC-3 RF input of a Dolby Digital
Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the OPTICAL DIGITAL
AUDIO OUT socket of the DVD video player.
• Connect the OPTICAL DIGITAL AUDIO OUT socket of the DVD video player to the “OPTICAL” of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs
or audio CDs.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
Amplifier equipped with
a DTS decoder
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s mains lead. If you leave the amplifier power
on, the speakers may be damaged.
To OPTICAL
type digital
audio input
“DTS” and “DTS Digital Out”
are trademarks of Digital
Theater Systems, Inc.
Optical digital lead (not supplied)
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
To obtain a higher quality picture
POWER
OPEN/CLOSE
CAUTION
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
Playing a disc
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
E
This section shows you the basics on how to play a disc.
PAUSE/STEP
PLAY
DVD VCD
CD
About
The
DVD VCD
CD
icons on the heading bar show the playable discs for the
STOP
function described under that heading.
DVD
: You can use this function with DVD video discs.
: You can use this function with Video CDs.
: You can use this function with Audio CDs and CD-R/RW CDs.
ENTER
VCD
C/D/B/A
CD
DVD
VCD
CD
Basic playback
Preparations:
To pause playback (still mode)
Press PAUSE/STEP during playback.
To remove the disc
•
When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. This may
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
include video or component video inputs which are exclusive to DVD playback.
When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input
connected to the DVD.
To resume normal playback, press
PLAY.
•
OPEN/CLOSE
• The sound is muted during still
mode.
Press ON/STANDBY (I / ).
The DVD turns on and the Power
Press OPEN/CLOSE or PLAY on the unit.
1
4
The disc tray closes automatically.
On the TV-screen, “ ” changes to
“Reading” and then playback
indicator lights.
“Reading” display will change to
“No Disc”.
(If DVD disc has already loaded,
playback will start automatically.)
To stop playback
Press STOP.
OR
commences.
Reading
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
Screen saver function
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press C/D or B/A to select title, then press
ENTER. Title is selected and play commences.
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
Press OPEN/CLOSE.
Press STOP to end playback.
Resuming facility
The disc tray opens.
2
3
Notes:
5
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 6 and 34).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press the OPEN/CLOSE button or the PLAY
button on the unit, “Reading” will appear on the display for 30 seconds and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 26.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
•
The unit records the stopped point,
depending on the disc. “
”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
•
If you press STOP again or unload
the disc (“ ” appears on the
screen.), the unit will clear the
stopped point.
Place the disc on the disc tray.
With the playback
side down
To start playback in the stop mode
Press PLAY.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
ON/STANDBY (I / ) button on your remote control once the movie is completed.
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD to malfunction.
• There may be a slight delay between you pressing the button and the function activating.
• Do not place a disc which is unplayable in this
DVD.
16
17
Basic playback
Advanced playback
DISPLAY
0–9
Playing a disc (continued)
Zooming/Locating desired scene
E
You can play discs at various speeds.
SLOW
/
SEARCH (JUMP)
ZOOM
PAUSE/STEP
REV
PLAY
FWD
CLEAR (CANCEL)
ENTER
SKIP
/
C/D/B/A
DVD
VCD
CD
DVD
VCD
DVD
VCD
Playing in fast reverse or fast forward directions
Zooming
Locating desired scene
CD
Use the title, chapter and time recorded on the disc to locate
the desired point to play back.
To check the title, chapter and time, press DISPLAY.
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
To resume normal playback
Press PLAY.
Press REV or FWD during playback.
PLAY
REV: Fast reverse playback
FWD: Fast forward playback
Press ZOOM during playback.
Press SEARCH (JUMP) during playback or stop
mode.
1
1
Notes:
Each time you press the REV or
FWD button, the playback speed
changes.
The centre part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM as follows.
• The DVD video player mutes sound and subtitles during
reverse and forward scan of DVD/VCD video discs.
However, this unit plays sound during fast forward or fast
reverse play of audio CDs.
• The playback speed may differ depending on the disc.
1
2
3
DVD
(x 1.3)
(x 1.5)
(x 2.0)
DVD
VCD
1
2
3
Video CD/
JPEG CD
Press C or D to select the “Time”, “Title” or
“Chapter”.
Playing frame by frame
(x 1.3)
(x 1.5)
(x 2.0)
2
To resume normal playback
Press PLAY.
Press PAUSE/STEP during still playback.
1
Each time you press the PAUSE/
STEP button, the picture advances
one frame.
PLAY
Note:
Note:
The sound is muted during frame by frame playback.
Press Number buttons (0–9) to change the
number.
In case of the Video CD recorded with
PAL colour system, 3 (x 2.0)
zooming does not work.
DVD
VCD
Playing in slow-motion
3
To resume normal playback
Press PLAY.
Press SLOW ( ) Forward or SLOW (
during playback.
) Reverse
Press C/D/B/A to view a different part of the
PLAY
frame.
2
Each time you press the button, the
slow-motion speed changes.
You may move the frame from the
centrepositiontoUP,DOWN,LEFTor
RIGHT direction.
Notes:
• If you input a wrong number, press
CLEAR (CANCEL).
• Refer to the package supplied with
the disc to check the numbers.
• The sound is muted during slow-motion playback.
• The Video CD can not play Reverse Slow.
DVD
VCD
CD
Locating a chapter or track
Press ENTER. Playback starts.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
4
3
Press SKIP
or
repeatedly to display the chapter or track number you want.
•
•
When you change the title,
playback starts from Chapter 1
of the selected title.
Some discs may not work in the
above operation.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Playback starts from the beginning of
the current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of
the preceding chapter or track.
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
Note:
In case of the Video CD playback with PBC, the Search (Jump)
26
Notes:
A “Prohibition” symbol
function does not work. To turn off PBC, see page
.
•
may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the DVD can not access the feature at this time. This does not indicate a problem with the DVD.
The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
•
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Marking desired scenes
Repeat playback/A-B Repeat playback
E
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
A-B RPT
MARKER
PLAY MODE
PLAY
CLEAR (CANCEL)
ENTER
ENTER
C/D
D/B/A
DVD
VCD
CD
DVD
VCD
CD
DVD
VCD
CD
DVD
VCD
CD
Repeat playback
Returning to the scenes
A-B Repeat playback
Marking the scenes
A-B repeat playback allows you to repeat material between
two selected points.
Press PLAY MODE during playback or stop
mode.
PressMARKERduringplaybackorstopmode.
Press MARKER during playback.
1
2
3
1
2
1
2
Press A-B RPT during playback.
1
The start point is selected.
A
[DVD]
Press B/A or ENTER once or twice to select
“Chapter” or “Title”.
Select the blank Marker using C or D.
Then press ENTER at the desired scene.
Press C or D to select the Marker 1-3.
The unit automatically starts repeat
playback after finishing the current
title or chapter.
•
Repeat this procedure to set
the other 2 scenes.
Press A-B RPT again.
Repeat
/Enter/Play Mode
Off
2
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, re-
turns to Point A automatically, then
starts again.
Press ENTER.
[Audio CD, Video CD, MP3/WMA CD]
Press D to select “Repeat”.
Press B/A or ENTER once or twice to select
“Track” or “All”.
Playback starts from the marked
scene.
Press MARKER to remove this display.
A
B
3
The unit automatically starts repeat
playback after finishing the current
track.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR
(CANCEL).
Notes:
•
•
Some discs may not work with the marking operation.
The marking is cancelled when you open the disc tray or
turn the power off.
Some subtitles recorded around the marker may fail to
appear.
To resume normal playback
Press A-B RPT again.
•
If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
•
“
” appears on the screen.
Off
Press PLAY MODE again to make the screen
disappear.
Notes:
3
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You can not set the A-B Repeat for the scenes that include
multiple angles.
To resume normal playback
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD, MP3/WMA/
JPEG CD.
Select Repeat : “Off” in step 2.
Notes:
•
•
Some discs may not work with the repeat operation.
In case of Video CD with PBC, repeat functions are prohib-
ited during playback.
• A-B Repeat is prohibited when PBC is on.
20
21
Advanced playback
Program playback/Random playback
0–9
Changing angles/Title selection/DVD menu
ANGLE
MENU
TOP MENU
E
You can arrange the playback order of tracks or files on the disc. And
also the unit selects tracks or files at random and playback them.
These feature works for Audio CD, Video CD and MP3/WMA/JPEG
CD.
PLAY MODE
PLAY
PLAY
SKIP
CLEAR (CANCEL)
ENTER
ENTER
C/D/B/A
C/D/B/A
VCD
CD
DVD
Changing angles
Program playback
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
Press PLAY MODE during stop mode.
Press C/D/B/A to select “Program Playback”
and press ENTER.
1
2
4
Press ANGLE during playback.
Press ANGLE repeatedly until the desired angle
is selected.
The programs you selected will start to playback in
the order.
1
2
The current angle will appear.
• IncaseofJPEGfile, pressSKIP
the program playback.
• To resume normal playback, select Play Mode:
“Off” in step 2.
tocontinue
1/9
Press C/D to select Play Mode, then press
B/A or ENTER to select “Program”.
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
DVD
Title selection
■ To change the program
1. In the program mode, press C/D/B /A to select the track
number.
2. Press Number buttons (0–9) to select the track number
to be replaced.
■ To clear the program one by one
In the program mode, press C/D/B/A to select the track
number. Then press CLEAR.
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
Press C/D or B/A to select the programming
position. Use Numbered buttons (0–9) to input
the track or file numbers.
3
Press TOP MENU during playback.
Press ENTER or PLAY.
Title menu appears on the screen.
1
2
3
The playback of the selected title will
start.
•
•
To program others, repeat step 3.
If you input a wrong number, press
CLEAR (CANCEL).
PLAY
■ To clear all the programs
In the program mode, press C/D/B/A to select “Clear”.
Then press ENTER.
Press C/D/B/A to select the desired title.
Play Mode
Repeat
:
:
Program
Off
1
2
3
7
3
11
4
5
7
8
1
1
0
1
Notes:
Note:
6
9
1
2
•
In playing back the Video CD with PBC, you can not set
Program playback.
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
Clear
Program Playback
/Enter/0 9/Cancel/Play Mode
•
The program is cancelled when you open the disc tray or
turn the power off.
DVD
DVD menu
VCD
CD
Random playback
Some DVDs allow you to select the disc contents using the menu.
When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.
Press PLAY MODE during playback or stop
mode.
Press PLAY
PLAY
.
Press MENU during playback.
The DVD menu appears on the screen.
Press ENTER.
1
2
3
The Random Playback will start.
1
2
3
The menu continues to another
•
Press MENU again to resume
playback at the scene when you
pressed MENU.
screen. Repeat steps 2 and 3 to set
the item completely.
•
•
If you set “Random” during playback mode,
Press C/D to select Play Mode, then press
B/A or ENTER to select “Random”.
Random playback will begin after the track that is
currently being played has ended.
To resume normal playback, select Play Mode:
“Off” in step 2.
Press C/D/B/A to select the desired item.
Note:
Depending on the DVD, you may not be able to resume playback
from the scene point when you pressed the MENU button.
Note:
In playing back the Video CD with PBC, you can not set
Random playback.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
AUDIO
SUBTITLE
AUDIO
Changing soundtrack language/
Setting surround sound
Subtitles/Karaoke playback
E
B/A
C/D/B/A
DVD
VCD
DVD
DVD
Karaoke playback
Subtitles
Changing soundtrack language
You can select the language when you play a multilingual disc.
When playing back a disc recorded with subtitles, you can You can turn the vocal on or off recorded on the DVD
select the subtitle language or turn the subtitle off.
KARAOKE.
In case of Video CD playback
Press AUDIO during playback.
Audio type changes as follows each time you press AUDIO.
1
The current soundtrack language will
appear.
During DVD KARAOKE disc playback, press
Press SUBTITLE repeatedly during playback
until your desired language appears.
AUDIO.
1
1
2
1/8 Eng
Notes:
Press C or D until the KARAOKE symbol (
)
•
If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
To turn off the subtitle, press SUBTITLE until
“Off” appears.
appears.
Press AUDIO repeatedly until the desired lan-
guage is selected.
2
2
•
Changing soundtrack language is cancelled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
Off
•
If you play non-Karaoke disc, the KARAOKE
symbol ( ) does not appear.
•
The on screen display will disappear after a few
seconds.
•
The on screen display will disappear after a
few seconds.
Notes:
Press B or A to select “On” or “Off”.
DVD
VCD
CD
•
•
•
Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
While playing a DVD, the subtitle may change when you
open or close the disc tray.
In some cases, a selected subtitle language may not be
changed immediately.
3
On : The primary vocal is output
Setting surround sound
when it is recorded on the disc.
Off : The primary vocal is not output.
This DVD video player equipped with a “SPATIALIZER VIRTUAL SURROUND”. It can produce the effect of being in a
cinema or a concert hall.
To cancel Surround mode:
Follow the left steps 1~2, then press B or A to select the
“Off” position.
During disc playback press AUDIO.
•
The on screen display will disappear after a
few seconds.
1
Note:
Notes:
The “SPATIALIZER VIRTUAL SURROUND” is effective only
for the sound of disc.
•
The vocal output feature is used during playback of Dolby
Digital (multi-channel) recorded DVD KARAOKE discs. This
feature allows you to turn off vocal audio tracks, or restore
them for background accompaniment.
When playing Karaoke, connect appropriate audio equipment
such as an amplifier to the DVD video player.
Press B or A to select “On”.
2
Spatializer® 3-Dimensional Sound Processing provided by
Desper Products. Inc.
Certain audio features of this product manufactured under
a license from Desper Products, Inc., Spatializer® and the
circle-in-square device are trademarks owned by Desper
Products, Inc.
•
•
The on screen display will disappear after a few
seconds.
24
25
Advanced playback
DISPLAY
1
Disc status/To turn off the PBC
MP3/WMA/JPEG operation
E
ThisplayercanplaybacktheMP3/WMA/JPEG-datawhichhasbeenrecordedonCD-RorCD-RW.ToproducetheMP3/WMA/
JPEG-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).
The Apple-HFS-System can not be played.
ENTER
DVD
VCD
CD
VCD
Disc status
To turn off the PBC
MP3/WMA/JPEG CD information
With each press of DISPLAY, the status of the disc
will appear on the screen and change as follows.
Press number button 1 in the stop mode, then
press ENTER.
Limitations on MP3/WMA/JPEG CD playback
•
MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits exten-
sion letters, “mp3”, “wma”, “jpg”.
•
•
MP3/WMA/JPEG CD must be correspond to the ISO standardized files.
This unit can read 200 files per disc. If one directory has more than 200 files, it reads up to 200 files, the
remaining files will be omitted.
[DVD]
•
•
•
•
•
The unit is able to recognize up to a maximum of 50 directories per disc.
MP3/WMA/JPEG CDs cannot be used for the purpose of recording.
If the CD has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.
It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 16
letters) on the screen. Long file names will be condensed.
00:34:56 01:12:33
00:34:56 01:12:33
1/99 Chapter 1/999
1/9
1/8 EngDolby Digital
1/32 Eng
Title
To make status display disappear, press DISPLAY
•
The music files recorded by “Hierarchical File System” (HFS) cannot be played.
again.
Limitations on display
[Video CD]
•
The maximum number for display is 16 letters.
Available letters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
Other letters than those above are replaced in hyphen.
00:12
04:32
PBC
Track –/–
00:12
04:32
•
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG CD in the recorded order,
1.Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2.Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).
3.Refrain from making too many sub-folders.
To make status display disappear, press DISPLAY
again.
[Audio CD]
CAUTION:
34:56
71:33
•
•
Some MP3/WMA/JPEG CDs can not be played back depending on the recording conditions.
The CD-R/RW that has no music data or non MP3/WMA/JPEG files can not be played back.
Track 11/99
Standard, sampling frequency, and the bit rate:
MP3 CD
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
When you playback the CD disc, the status display
will appear on the screen and continue displaying.
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA CD
WMA version 7, and 8
32kHz, 48kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
MP3/WMA/JPEG operation (continued)
0–9
0–9
E
ANGLE
MENU
TOP MENU
PLAY
TOP MENU
PAUSE
PLAY
SKIP
/
STOP
ENTER
STOP
ENTER
■ / ■ /
/
■ / ■ /
/
CD
CD
CD
JPEG CD playback
Slide show playback
MP3/WMA CD playback
The slide show enables you to view pictures (files) one
after another automatically.
Place a disc on which JPEG files have been
recorded onto the tray.
Place a disc on which MP3 or WMA files have
been recorded onto the disc tray.
Press STOP to end playback.
1
2
5
1
2
Preparation:
STOP
•
Set “JPEG Interval” setting to “5 Seconds”, “10 Sec-
A file menu screen will appear on the screen.
Press B/A to select folder.
33
onds” or “15 Seconds”
.
A file menu screen will appear on the screen.
Press B/A or ENTER to select folder.
•
The unit records the stopped point. “ ” appears on
the screen. Press PLAY to resume playback (from
the scene point).
If you press STOP again or unload the disc, the unit
will clear the stopped point.
Select your desired starting file for the slide
show in the step 3 as left.
-/72 --:--
CD-R
Pops
1
2
1
2
3
4
5
6
7
Japan
Bay Bridge
CLOSE MY EYES 10
8
9
flower
•
Lies and Truth-
winter fall
Rain
Strawberry
Welcome party
Thailand
Press ENTER to start slide show from the
selected file.
DIVE TO BLUE 11
Honey
BLUE EYES
Blurry Eyes
12
13
14
/0-9/Enter/Play Mode
About file menu
Operation
Media type
Press C/D/B/A or Number buttons (0–9) to
select the desired file.
To display a picture menu, press MENU.
(To return to a file menu, press TOP MENU.)
Press B/A or C/D to select the desired file.
Elapsed time
File number
Press C/D/B/A or Number buttons (0–9) to
select the desired file.
3
3
•
If you press PAUSE during the slide show, the slide
show stops temporary. “ 4 ” appears briefly on the
picture.
Folder
If the picture appears upside down or sideways,
press ANGLE repeatedly until it’s right side up.
“
”, “
”, “
” or “
” appears briefly
on the screen.
Press PLAY or SKIP
show.
When the slide show playback finished the file list
appears.
To stop the slide show, press STOP. The file list ap-
pears.
•
In case the folder includes more than 15 files, press
B or A to display next file list.
•
•
To display next list, press SKIP
/
.
/0-9/Enter/Play Mode/Menu
again to resume the slide
When PLAY has been pressed after displaying
the file menu, or when the disc tray has been
closed after pressing PLAY, playback begins
automatically starting from the first file. In this
case, if the first file is a JPEG file, the first JPEG
file is played back. If the first file is an MP3/
WMA file, only MP3/WMA files are played back
in order.
: Indicates MP3-file
: Indicates WMA-file
: Indicates JPEG-file
•
•
-
/72 --:--
-/72 --:--
CD-R
CD-R
Pops
Pops
15
16
Mother
Hold Your Last
1
2
3
4
5
6
7
Japan
Bay Bridge
CLOSE MY EYES 10
8
9
flower
Lies and Truth-
winter fall
Rain
Strawberry
Welcome party
Thailand
DIVE TO BLUE 11
Honey
BLUE EYES
Blurry Eyes
12
13
14
Notes:
•
•
•
The picture menu is displayed when the FUJICOLOR CD
or the Kodak Picture CD are played. To display the file
menu, press TOP MENU.
In the case of a CD containing a mixture of MP3, WMAand
JPEG files, the files are played back by selecting them from
the file menu.
/0-9/Enter/Play Mode
/0-9/Enter/Play Mode
• When PLAY has been pressed after displaying the
file menu, or when the disc tray has been closed
using PLAY, playback begins automatically starting
from the first file. In this case, if the first file is an
MP3/WMA file, only MP3/WMA files are played back
in order. If the first file is a JPEG file, the first JPEG
file is played back.
Press ENTER. The selected picture appears
on the screen.
4
5
MP3 or WMA file on the Kodak Picture CD is not recog-
nized on this unit.
Notes:
•
During MP3/WMA/JPEG-Playback, you can not use SEARCH,
Press ENTER.
The selected file starts playing back.
Rotating an image
A-B Repeat functions.
You can rotate an image by 90 degrees by press-
ing ANGLE during playback of the image.
•
You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA/JPEG CD Playback (see
pages 21 and 22).
In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
4
“
”,
“
”,
“
”
or
“
”
appears
•
briefly on the screen.
Press STOP to end playback.
The file menu appears on the screen.
If you want to watch the other file, repeat steps
3 ~ 4.
Microsoft, Windows Media, and Windows Logo are trademarks
or registered trademarks of Microsoft Corporation in both the
United States and other countries.
STOP
28
29
Function setup
Customizing the function settings
E
You can change the default settings to customize performance
to your preference.
RETURN
Setting details
SETUP
ENTER
Section
Option
Details
Page
C/D/B/A
Menu
Subtitle
Audio
To select the language of “Menu”, “Subtitle” and
“Audio” if their languages are recorded onto the
disc more than one language.
DVD
VCD
CD
Language
Setting procedure
32
Press SETUP during stop mode.
To make SETUP screen disappear, press
SETUP or RETURN.
E.B.L.
To select On or Off for E.B.L. (Enhanced Black
Level).
32
32
33
33
33
33
1
5
The following on-screen display
appears.
Tv Screen
Display
To select a picture size according to the aspect
ratio of your TV.
Language Picture Sound Parental Other
To turn on or de-activate the operational status dis-
play on the screen.
Picture
/Enter/Setup/Return
JPEG Interval
Select Files
Dialogue
To select a preferred setting for the slide show play-
back.
Press B or A to select the desired section, then
press D or ENTER.
2
3
4
To select a preferred file type for playing back a CD
containing a mixture of file types.
To select On or Off for DRC (Dynamic Range Con-
trol).
Sound
Password
Parental
Input 4-digit password to set the parental level.
34
34
Parental
Press C or D to select the desired option.
To select a preferred parental level for the parental
setting.
OSD Language
Output
To select a preferred language for on screen display.
Other
To select a preferred video output signal of “RGB”,
“Component” or “Progressive”.
Change the selection using C/D/B/A or ENTER,
by referring to the corresponding pages 32~34.
• Repeat step 3 and 4 to change
other settings.
• To select another operation, go
back to step 2.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
E
Setting details
Sound
Language
Picture
Display
Language Picture Sound Parental Other
Dialogue
Off
On
Off
:
:
DRC(TV)
DRC(Std)
On screen display can be switched on or off when you
press the buttons.
On: On screen displays appear when you press
the buttons (factory setting).
/Enter/Setup/Return
Off: On screen displays do not appear when you
press any buttons.
E.B.L.
Menu, Subtitle, Audio
Dialogue
To select the black level of playback pictures, set your
preference and monitor’s ability.
You can select the language of “Menu”, “Subtitle” and
“Audio” if more than one languages are recorded onto
the disc.
JPEG Interval
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
You can continuously play back all JPEG files automati-
cally.
After the setting below, start playing the disc on which
JPEG files have been recorded.
On: Enhanced grey scale (0 IRE cut off)
Off: Standrard grey scale (7.5 IRE cut off)
English, Francais, Espanol, Deutsch, Italiano:
The selected language will be heard or seen.
On: Loud sound such as explosion or similar
is toned down slightly when played back.
This makes it suitable for when it is con-
nected to a stereo.
Off: It plays back at the recording level on the
disc.
Other:
Tv Screen
Off:
Other language can be selected (see the
“Language code list” on page 36).
Plays back one file at a time.
You have the following screen sizes to choose from:
Automatic: (Subtitle)
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
4:3
Letter box:
•
The unit will automatically select the same
language in the AUDIO setting.
When the unit selects the same language as
the AUDIO, the subtitles will not appear during
playback.
Notes:
Select this mode when connecting to a conven-
tional TV. When playing back a wide screen-DVD
disc, it displays the wide picture with black bands
at the top and bottom of screen.
•
•
This function works only during playback of Dolby Digital
recorded discs.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
•
The level of Dynamic Range Reduction may differ
depending on DVD video disc.
•
When you do not use the same language as
the AUDIO, the subtitles will appear during
playback.
4:3
Pan scan:
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
Off: (Subtitle)
Subtitles do not appear.
16:9
Wide:
Original: (Audio)
The unit will select the first priority language of
each disc.
Select this mode when connecting to a wide-screen
TV. A wide screen picture is displayed full size.
Select Files
Note:
Note:
When playing back a CD containing a mixture of MP3,
WMA and JPEG files, only MP3/WMA or JPEG files can
be displayed on the file menu.
If the DVD disc is not formatted in the pan & scan style,
it displays 4:3 style.
If the selected language is not recorded on the disc, the
first-priority language is selected.
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
32
33
Function setup
OPEN/CLOSE
Setting details
Temporary disabling of rating level by DVD disc
0–9
E
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
Other
RETURN
PLAY
Parental
It is up to you to decide whether to cancel the rating level or not.
ENTER
■ /■
Enter the password with Number buttons (0–9).
Then press ENTER.
Load
CLOSE on the unit
a
DVD disc and press PLAY or OPEN/
16
Parental control setting
Some discs are specified not suitable for children.
Suchdiscscanbelimitednottoplaybackwiththeunit.
OSD Language
.
1
2
4
You can select the language of On Screen Display.
If you interrupt the entering, press
RETURN.
PLAY
1) Press C or D to select “Parental”, then press B
or A until the level you require appears.
English, Francais, Espanol, Deutsch, Italiano:
The selected language will be seen.
• Level Off:
The parental control setting does not
function.
OPEN/CLOSE
Output
• Level 8:
• Level 1:
All DVD software can be played back.
DVD software for adults cannot be
played back.
You can select the video output signal of the DVD
video player to the TV from “RGB”, “Component” or
“Progressive”.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select “Password”.
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can
not be changed unless you enter the correct pass
word.
IftheDVDdischasbeendesignedtotemporarily
canceltheRatinglevel, thescreenwhichfollows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
RGB:
Select when connecting to an RGB or composite
TV.
Component:
Select when connecting to a TV equipped with
component video inputs but progressive scan is
not compatible.
Playback will commence if the entered pass-
word was correct.
5
Reading
Your disc exceeds
the parental control level#.
Progressive:
Note:
Parental Control Level
Cancel Picture
Select when connecting to a TV equipped with
component video inputs, progressive scan
compatible.
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
To change the parental level
1) Press C or D to select “Password”.
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select “Parental”, then press B
or A to change the parental level.
5) Press C or D to select “Password”, then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
/Enter/Return
Warning:
If you wish to cancel the set rating level temporar-
ily, select “Parental Control Level” with
Once “Progressive” is selected when connecting to a
TV progressive scan incompatible, no image will be
seen on the video display.
In this case, you must reset the unit by pressing the
STOP button on the front panel for five seconds. The
video output will be restored to “RGB” setting, and a
picture will once again be seen on a conventional
analog display. (You may need to make the Scart
connection if you connect a TV, progressive scan
incompatible, with component lead only.)
or
,
3
then press ENTER. If the 4-digit password at step
2 on page 34 has been set, the password entering
screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or have
forgotten) the password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
Now the parental level is changed and locked.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
Notes:
• Some discs may not be played back with the progres-
sive scanning mode correctly because of the disc
characteristics or recording condition.
• Once Progressive scan on, all other video outputs are
disabled except component video outputs.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. While holding STOP down on the front panel, press 7
on the remote control. “PASSWORD CLEAR” appears
on the screen.
OPEN/CLOSE
Note:
5. Enter a new password again.
If each setup (pages 32~34) has been completed, the unit
can always be worked under the same conditions (espe-
cially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
Notes:
•
•
Depending on the discs, the unit cannot limit playback.
Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.”
For those discs, the age restriction will not work.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Others
Language code list
Before calling service personnel
Check the following guide for the possible cause of a problem before contacting service.
E
32
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio”
.
Symptoms and correction
Language Name Code Language Name Code Language Name Code Language Name Code
Abkhazian
Afar
1112 Fiji
1620 Lingala
1619 Lithuanian
1628 Macedonian
1635 Malagasy
1722 Malay
2224 Singhalese
2230 Slovak
2321 Slovenian
2317 Somali
2329 Spanish
2322 Sundanese
2330 Swahili
2319 Swedish
2328 Tagalog
2325 Tajik
2919
2921
2922
2925
1529
2931
2933
2932
3022
3017
3011
3030
3015
3018
1225
3019
3025
3028
3021
3033
3121
3128
3136
3219
3225
1335
3325
3418
2019
3525
3631
Symptom
Cause
Correction
Page
–
1111 Finnish
1116 French
2927 Frisian
1123 Galician
1128 Georgian
1835 German
1129 Greek
No power.
• The power plug is disconnected.
•
Connect the power plug securely into the
wall outlet.
Afrikaans
Albanian
Amharic
Arabic
No picture.
No sound.
• The TV is not set to receive DVD signal
output.
•
Select the appropriate video input mode
on the TV so the picture from the DVD
video player appears on the TV screen.
16
12
–
• The video cable is not connected securely.
•
•
Connect the video cable securely into the
appropriate jacks.
2111 Malayalam
1415 Maltese
1522 Maori
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD video player.
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
• The audio cable is not connected securely.
•
•
Connect the audio cable securely into
the appropriate jacks.
12~15
16
1135 Greenlandic
1136 Guarani
1211 Gujarati
1531 Hausa
2122 Marathi
1724 Moldavian
1731 Mongolian
1811 Nauru
• The audio receiver or TV is turned off.
Turn on the equipment connected with
the audio cable.
2324 Tamil
17
5
• The unit is in the special playback mode.
• The disc is dirty.
•
•
•
Resume the normal playback.
Eject the disc and clean it.
Basque
2411 Tatar
The playback picture has
occasional distortion.
Bengali; Bangla 1224 Hebrew
1933 Nepali
2415 Telugu
2425 Thai
• It is in fast forward or fast reverse
playback.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
–
Bhutani
Bihari
1436 Hindi
1819 Norwegian
1831 Oriya
Brightness is unstable or
noises are present in the
playback pictures.
• The effect of copy protection.
•
Connect the DVD video player directly to
the TV. Avoid connecting the DVD video
player to a VTR or TV/VTR combination.
1218 Hungarian
1228 Icelandic
1217 Indonesian
2335 Interlingua
1215 Irish
2528 Tibetan
2611 Tigrinya
12
Breton
1929 Panjabi
The DVD video player does
not start playback.
• No disc is inserted.
•
•
Insert a disc.
16
6
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
1924 Pashto, Pushto 2629 Tonga
• An unplayable disc is inserted.
Insert a playable disc. (Check the disc
type and colour system.)
1911 Persian
1711 Polish
1611 Turkish
2622 Turkmen
2630 Twi
• The disc is placed upside down.
•
•
Place the disc with the playback side
down.
16
2123 Italian
1930 Portuguese
2011 Quechua
• The disc is not placed within the guide.
Place the disc correctly inside the guide
on the disc tray.
16
5
1311 Japanese
3618 Javanese
1325 Kannada
1828 Kashmiri
1329 Kazakh
1411 Kirghiz
2422 Korean
1524 Kurdish
1525 Laothian
1530 Latin
2731 Ukrainian
• The disc is dirty.
•
•
Clean the disc.
2033 Rhaeto-Romance 2823 Urdu
• The parental lock function is set.
Cancel the parental lock function or
change the parental lock level.
34
2124 Romanian
2129 Russian
2121 Samoan
2135 Sanskrit
2125 Scots Gaelic
2131 Serbian
2825 Uzbek
2831 Vietnamese
2923 Volapük
2911 Welsh
1714 Wolof
•
appears on the screen.
•
•
•
The function is prohibited with the unit or
the disc.
6
–
Playback does not follow the
course of the disc’s programme.
• It is in the mode of repeat playback,
programme playback, etc.
These operations may prevent a proper
progress of the contents.
Danish
Buttons do not work.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
Turn the power on or off with ON/
STANDBY. Or disconnect the power plug
and insert it into the wall outlet again.
Dutch
–
English
2928 Xhosa
The remote control does not
work properly.
•
•
•
Point the remote control at the remote
sensor of the DVD video player.
• The remote control is not pointed at the
remote sensor of the DVD video player.
11
11
11
Esperanto
Estonian
Faroese
2225 Serbo-Croatian 2918 Yiddish
2211 Shona
2924 Yoruba
2914 Zulu
Operate the remote control within about
7 m.
• The remote control is too far from the
DVD video player.
1625 Latvian, Lettish 2232 Sindhi
Replace the batteries with new ones.
• The batteries in the remote control are
exhausted.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
|