Pperation
Biacs
erID/Clwating
AldIfrmation
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Preparation
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .5
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Parts identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
LOCATION OF CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Base unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting up the base unit (Desk top mounting) . . . . . . . . . . . . . . . . . .10
Setting up the base unit (Wall mounting) . . . . . . . . . . . . . . . . . . . . .11
Charging the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Setting the Tone/Pulse switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Setting or cancelling the Auto Talk function . . . . . . . . . . . . . . . . . . . .14
Setting or cancelling caller ID on call waiting . . . . . . . . . . . . . . . . . .15
Setting the area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Carrying the handset in the Belt clip . . . . . . . . . . . . . . . . . . . . . . . . .17
Using a headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Basics
BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Out of range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Changing the ringer volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Changing the handset speaker volume . . . . . . . . . . . . . . . . . . . . . .20
3 number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Sending the tone signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Paging the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Interference or static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
MEMORY DIALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Storing numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Dialing a stored number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Changing and deleting stored numbers . . . . . . . . . . . . . . . . . . . . . .26
Caller ID/Call waiting
CALLER ID/CALL WAITING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Answering a call with caller ID service . . . . . . . . . . . . . . . . . . . . . . .28
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Searching caller ID memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Dial out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Editing caller ID data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Storing to speed dial memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Deleting caller ID data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Additional Information
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
WARRANTY/SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
WALL MOUNT TEMPLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment,
9 Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric shock.
Never spill liquid of any kind on the
product.
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and injury.
1 Read and understand all instructions.
Pperation
2 Follow all warnings and instructions
marked on the product.
10 Do not disassemble this product.
Opening or removing covers puts you
at risk of electrical shock, and incorrect
reassembly can cause shocks, sparks
or other damage during subsequent
use.
3 Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning.
4 Do not use this product near water
sources, such as bath tubs, wash
bowls, kitchen sinks, laundry tubs, wet
basements, or swimming pools.
11 Take this product to a qualified service
technician under any of the following
conditions:
5 Do not place this product on an
unstable cart, stand, or table. The
telephone may fall, causing serious
damage to the telephone.
A. When the power supply cord is
damaged or frayed.
B. If liquid has been spilled into the
product.
6 Slots and openings in the cabinet and
the back or bottom are provided for
ventilation. To protect it from
C. If the product has been exposed to
rain or water.
D. If the product does not operate
normally according to the operating
instructions. Adjust only those
controls covered by this manual.
Improper adjustment of other
controls may result in serious
damage to the unit or your home.
E. If the product has been dropped or
the cabinet has been damaged.
F. If the product exhibits a distinct
change in performance.
overheating, these openings must not
be blocked or covered. The openings
should never be blocked by placing
the product on a bed, sofa, rug, or
other similar surface. This product
should never be placed near or over a
radiator or heat register. This product
should not be placed in a built-in
installation unless proper ventilation is
provided.
7 Do not allow anything to rest on the
power cord. Do not locate this product
where the cord can be stepped on or
tripped over.
12 Do not use the telephone in the
vicinity of a gas leak.
8 Do not overload wall outlets and
extension cords as this can result in
the risk of fire or electric shock.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
The RBRCTM Seal
The RBRCTM Seal on the (easily removable) nickel-cadmium battery
(contained in our product) indicates that Toshiba America Consumer
Products, Inc. (TACP) is voluntarily participating in an industry program
to collect and recycle these batteries at the end of their useful lives,
when taken out of service within the United States. The RBRCTM
program provides a convenient alternative to placing used nickel-
cadmium batteries into the trash or municipal waste, which is illegal in some areas.
TACP’s payments to RBRCTM make it easy for you to drop off the spent battery at
local retailers of replacement nickel-cadmium batteries, or at authorized TACP product
service centers. You may also contact your local recycling center for information on
where to return the spent battery. Please call 1-800-8-BATTER for information on Ni-
Cd battery recycling in your area. TACP’s involvement in this program is part of its
commitment to protecting our environment and conserving natural resources.
RBRCTM is a trademark of Rechargeable Battery Recycling Corporation.
CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS BY THE
BATTERY, READ AND FOLLOW THESE INSTRUCTIONS.
4 Exercise care in handling the
batteries. Contact with conductive
materials such as rings, bracelets and
BATTERIES
keys may cause the battery to short
1 Use only the appropriate type and
out, resulting in overheating which
size battery pack specified in the
could burn.
instruction manual provided for this
5 Charge the battery pack provided with
or identified for use with this product
only in accordance with the
product.
2 Do not dispose of the battery pack in
a fire. The cell may explode. Check
with State and local codes for
instructions and limitations specified
in the instruction manual provided for
this product.
possible special disposal instructions.
3 Do not open or mutilate the battery
pack. Released electrolytes are
corrosive and may cause damage to
the eyes or skin. It may be toxic if
swallowed.
6 Observe proper polarity orientation
between the battery pack and the
battery charger.
ATTENTION: THE PRODUCT THAT YOU HAVE PURCHASED CONTAINS A
RECHARGEABLE BATTERY. UNDER VARIOUS STATE AND LOCAL LAWS, IT MAY
BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE MUNICIPAL WASTE
STREAM. PLEASE CHECK WITH YOUR LOCAL GOVERNMENT FOR DETAILS IN
YOUR AREA REGARDING RECYCLING OPTIONS OR PROPER DISPOSAL.
SAVE THESE INSTRUCTIONS
TO HELP PROTECT THE ENVIRONMENT, THIS PRODUCT MAY CONTAIN
RECYCLED OR RECONDITIONED PARTS AND MATERIALS.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
FEATURES
Toshiba America Consumer Products, Inc., takes pride in presenting
the SG-1600/1800 digital spread spectrum cordless telephone. The
Toshiba SG-1600/1800 handset features a 16-digit x 3-line dot matrix
liquid crystal display (LCD) for caller ID on Call Waiting and speed dial
programming and calling. The sleek new design provides face-up
battery charging even when wall mounted. Other features are
summarized below.
Pperation
•2.4GHz digital spread spectrum
transmission with extended talk
range
•30-channel auto scanning
•50 name & number Caller ID - only
works in conjunction with service
provided by your local telephone
company
•Caller ID on Call Waiting is
available if both services are
subscribed to and provided by your
local telephone company
•Digital call protect privacy
scrambling and digital security code
•Backlit 3-line alphanumeric LCD
display
•Volume control (4 level)
•Ringer volume and tone control
•20 speed dial (20 digits)
•Long standby battery life (7 days)
•One way page/Handset locator
•3 number redial (32 digits)
•Any-key answer
•Hearing aid compatible/HAC
volume
•Desk/Wall mountable (Bracket
included)
•Headset jack
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
PARTS IDENTIFICATION
Handset
Base Unit
SUPPLIED ACCESSORIES:
Wall Mount Bracket
Part #.RC009262
Modular Line Cord
Part #.RC008231
Rechargeable Battery Pack
Toshiba TRB-8000
Part #.RC004931
AC Adaptor
TAC-1700
Part #.RC009258
Belt Clip
Part #.RC009263
Owner’s manual
Part #.RC009260
Quick Reference Guide
Part #.RC009261
For purchase of accessories, please call 1-877-644-7373.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
HANDSET
Antenna
Pperation
VOL
(VOLUME/RINGERL) button (Up
Headset jack
arrow button)
VOL
(VOLUME/RINGERM) button
(Down arrow button) (page 20)
MEM
(Memory) button (page 23)
CID
(Caller ID) button (page 30 to 35
)
TALK
button (page 18 to 19)
CID
L.D./1
button (page 32)
FLASH
button (page 29)
LOCAL
L.D.
button (page 32)
LOCAL/3
Dialpad
TONE/
(TONE) button (page 21)
(
) button (Left arrow button)
(page 23 to 27)
#
(
) button (Right arrow button)
(page 23 to 27)
TONE
RDL/P
(Redial/Pause) button
RDL/P FUNCTION
SELECT
DELETE
(page 21)
DELETE
button (page 26 to 27, 34 to 35)
SELECT button (page 24 to 27, 33 to 35)
FUNCTION
button (page 14 to 16)
CHANNEL
button (page 22)
BASE UNIT
DC IN 9V jack (page 10)
LINE modular jack (page 10)
Tone/Pulse switch (page 14)
IN USE/CHARGE LED
PAGE
button (page 22)
Antenna
Charging contacts
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING UP THE BASE UNIT (DESK TOP MOUNTING)
For setting up the base unit follow the instructions below.
Snap the bracket’s tab into the
notches on the base.
Fasten the AC adaptor
cord to prevent it from
being disconnected.
Raise the
anntenna to
vertical
position.
Single-Line
Telephone Jack
(RJ11C)
Telephone Line Cord
AC Adaptor
Power Outlet
(AC 120 V, 60 Hz)
• USE ONLY WITH Supplied AC ADAPTOR (TAC-1700; power source
AC 120V 60Hz/DC9V).
• The AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING UP THE BASE UNIT (WALL MOUNTING)
MOUNTING ON A STANDARD WALL PLATE:
Pperation
Insert the bracket’s tabs into the
base’s lower tab slots, then press
down on the top of the bracket to
snap it into the clip slots.
Flip the switch hook
tab over so the tab
holds the handset.
Raise the antenna.
Single-Line
Telephone Jack
(RJ11C)
Telephone Line Cord
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
• Route the cords through the guides.
• Place the base unit on the posts of the wall plate and push down until it is
firmly seated.
• USE ONLY WITH Supplied AC ADAPTOR (TAC-1700; power source AC
120V, 60 Hz/DC 9V).
NOTES:
• Do not use any outlet controlled by a wall switch.
• If you don’t have a standard wall plate, cut out the template on page 33 and
use it to position two screws (minimum length of 13/8 inches) into the wall
with the heads protruding about 1/4 inch.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
CHARGING THE BATTERY PACK
1
Remove the battery compartment
cover on the back of the handset by
sliding it down.
Black
Red
2
Plug the battery pack cord into the
connector in the battery
compartment by observing the
correct polarity. It fits in only one
way.
3
4
Place the battery pack in the battery
compartment.
Put the battery compartment cover
back by sliding until it snaps into
place. Make sure not to get the
wires of the battery pack caught in
the cover.
5
Place the handset on the base unit.
Be sure the IN USE/CHARGE LED
lights.
If the IN USE/CHARGE LED does
not light, make sure the AC adaptor
is plugged in securely and that the
electrical outlet is working and not
controlled by a light switch.
It is important to charge the
battery for 12 to 16 hours
continuously without any
interruption before you use the
handset for the first time.
IN USE/
CHARGE
LED
Charging
contacts
NOTES:
• Use only the supplied battery pack (TRB-8000; power source 600mAh,
3.6VDC)
• The battery pack is not charged properly if the charging contacts are dirty or
tarnished. Clean the contacts occasionally with a dry cloth.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
After the battery pack is fully charged;
Operation
Approx. battery life
up to 6 hours
While in use (Talk mode)
While not in use (Standby mode)
Pperation
up to 7 days
When "Low Battery"blinks on the LCD, the battery needs to be
charged. Finish the call as soon as possible and place the handset on
the base unit.
Low Battery
NOTE:
If a call comes in when the battery is too low to operate properly, you will be
unable to answer the call or the call will be disconnected.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING THE TONE/PULSE SWITCH
Set the TONE/PULSE switch to TONE.
If the call does not connect with the TONE setting, set the
TONE/PULSE switch to PULSE.
TONE/PULSE switch
SETTING OR CANCELING THE AUTO TALK FUNCTION
If the handset is placed on the base unit, you can answer a call by
simply lifting the handset from the base unit (Auto Talk). If the handset
is not on the base unit, you can answer a call by pressing any one of
the buttons (Any-key Answer function). When the Auto Talk function is
set to ON, the Any-key Answer function is also set to ON.
When the Auto Talk function is set to OFF, you can lift the handset and
view the caller ID information before choosing to answer. This function
is preset to OFF at the factory prior to shipment.
SELECT
FUNCTION
FUNCTION
1
2
3
Press
. The LCD displays the
1
s
Auto Talk:Off
2 CIDCW :On
3 Area Code:
current setting.
SELECT
Press
. Each time you press SELECT ,
the On/Off setting will be switched.
Press FUNCTION . The handset is put in
standby mode.
1
s
Auto Talk:On
2 CIDCW :On
3 Area Code:
14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING OR CANCELING CALLER ID ON CALL WAITING
This function is preset to ON at the factory so that you will receive
caller ID on Call Waiting when subscribing to both local telephone
company services.
Pperation
If you do not subscribe to these services, be sure to set this function to
OFF.
SELECT
FUNCTION
FUNCTION
1
2
Press
. The LCD displays the
1
s
Auto Talk:Off
2 CIDCW :On
3 Area Code:615
current setting.
2
Press
or
to move the pointer to
1 Auto Talk:Off
SELECT
CIDCW and press
press
. Each time you
2
s
CIDCW
:On
3 Area Code:615
, the On/Off setting will be
SELECT
switched.
3
Press FUNCTION and replace the handset on the base unit.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING THE AREA CODE
It is necessary to program your area code so that local calls will be
properly displayed on caller ID.
Dialpad
SELECT
FUNCTION
FUNCTION
1
2
3
Press
. The LCD displays the
1
s
Auto Talk:Off
following message.
2 CIDCW
3 Area Code:
:On
3
Press
Code.
or
to move the pointer to Area
1 Auto Talk:Off
2 CIDCW
:On
s
3 Area Code:
Press SELECT .
1 Auto Talk:Off
2 CIDCW :On
Enter a 3-digit area code. For example, enter
3 Area Code:615
“615.”
DELETE
If you enter a wrong number, press
.
4
5
Press SELECT . A beep sounds and the area
code is set.
1 Auto Talk:Off
2 CIDCW
:On
s
3 Area Code:615
FUNCTION
Press
. The handset is put in
standby mode.
NOTES:
• Change your area code when you move to another location that has a
different area code.
• When you make a call to a number within your area code, only the last 7
digits of the number are dialed. During call-back, however, the phone will
include the area code from where the call originated when it automatically
redials the number. To avoid this problem, always be sure to set the area
code of your phone so that the phone will automatically exclude the area
code when the incoming code is the same as that of the phone.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
CARRYING THE HANDSET IN THE BELT CLIP
You can attach the Belt Clip to the handset in order to carry it on your belt.
Attaching the Belt Clip to the Handset
Pperation
Insert the Belt Clip tabs into the holes
on each side of the handset until they
click.
NOTE:
Be sure to insert the tabs properly into each
hole to prevent the Belt Clip from falling off.
Removing the Belt Clip from the Handset
Pull both sides of the Belt Clip to release the tabs from the grooves.
NOTE:
Remove the Belt Clip carefully from the handset, taking care not to hurt your
fingers or damage your nails.
USING A HEADSET
You can talk with hands-free convenience using an optional headset
(part#: RC 008260) that has a 3/32-inch(2.5mm) plug.
To connect the headset, open the
rubber cover on the left side of the
handset, then insert the headset's plug
into the jack.
With a headset connected, you can
make or answer calls as usual using
the keys on the handset.
You can use the supplied Belt Clip to
hang the handset on your belt for
greater convenience.
When you finish using the headset,
disconnect it from the handset and
close the rubber cover to protect the
jack.
NOTES:
• The handset's earspeaker and microphone are turned off with a headset
connected.
VOL
• Pressing the
headset's volume.
(L,M) button of the handset also controls the connected
• If you place the handset on the base unit while the headset is connected, be
sure the handset is placed properly.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
MAKING A CALL
TALK
Dialpad
DELETE
1
Key-in the phone number.
1234567890123456
789
The LCD displays the entered numbers.
NOTE:
To delete a wrong number, press
DELETE
. To delete all numbers, press and
DELETE
hold
.
TALK
2
3
Press
. “Talk” and the volume setting
Talk
<High>
appears on the LCD.
The number is dialed.
Talk 0:00
1234567890123456
789
After about 5 seconds, the LCD displays the
duration of the call.
TALK
To hang up, press
unit.
or place the handset on the base
18
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
ANSWERING A CALL
TALK
1
2
When a call is received, the phone rings and
the LCD displays as shown.
Incoming call
Press TALK to connect.
Talk
<High>
0:00
Biacs
“Talk” and the volume setting appears on the
LCD.
TALK
3
To hang up, press
on the base unit.
or place the handset
12:35
OUT OF RANGE
During a call, as you begin to move too far from the base unit, you first
hear a clicking sound. As you travel farther, the noise increases.
Then, you should move close to the base unit. If you travel out-of-
range, your call terminates.
CALL WAITING
To use this feature, you must subscribe to the Call Waiting Service.
1
2
When you hear a call-waiting tone while you are already talking on
the phone, simply press FLASH .
To take the original call back, press FLASH again.
NOTE:
FLASH
Pressing
current caller.
without receiving a Call Waiting signal may disconnect the
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
CHANGING THE RINGER VOLUME
Use the following procedure to set the ringer volume of the handset as
desired.
VOL
VOL
Press
to select one of four ringer tone and volume combinations
during standby mode.
VOL
Each time you press
(M or L), the LCD will display the setting
and the phone will ring using the selected ringer.
CHANGING THE HANDSET SPEAKER VOLUME
VOL
VOL
During a telephone call, press
to select one of four speaker
volume levels; Loud, High, Medium or Low.
VOL
Each time you press
(M or L), the LCD will display the setting.
NOTE:
The volume setting Loud may be too loud because it is set for hearing aid
compatibility.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
3 NUMBER REDIAL
To redial any of the last three numbers dialed from the handset (up to
32 digits):
TALK
RDL/P
RDL/P
1
2
Press
during standby mode.
Biacs
The last dialed number (Redial 1) appears on the LCD. Each
RDL/P
press of
will display one of the three numbers dialed.
Press TALK when the desired number is displayed.
SENDING THE TONE SIGNAL
Even if you have PULSE service (the TONE/PULSE switch is set to
pulse), you can use this phone with banking and other phone services
requiring touch tone signals.
TONE/
1
2
Dial the service number and wait for the connection.
TONE/
Press
, then enter the numbers required.
You will hear the tones on the line.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
PAGING THE HANDSET
PAGE
PAGE
1
To locate the handset while it is off the base, press
.
The handset beeps for 30 seconds and the LCD displays the
following message:
PAGE
To stop paging, press
or TALK twice,
Paging
or return the handset to the base unit.
NOTES:
• You cannot page the handset during a call.
• Be careful not to close your ear to the ringer on the back side of the handset
while paging, because it may be too loud.
INTERFERENCE OR STATIC
CHANNEL
If you hear noise during a call, press
to select another
channel. The LCD displays “Scanning” while changing a channel.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
You can store up to 20 telephone numbers and their associated
names in the memory.
You can program them yourself or transfer them from the Caller ID
memory.
NOTES:
• Always press a button within 20 seconds after pressing the previous button.
Otherwise, the setting procedure will be canceled and the handset is put in
standby mode.
• If you press a wrong button, an error tone sounds and the handset returns to
standby mode.
• If you receive an incoming call or a pager call from the base unit or you press
TALK
or charge the handset during the operation, the operation will be
cancelled.
STORING NUMBERS
Biacs
You can store up to 20 digits including #, , and PAUSE as a
telephone number, and up to 13 characters as a name in one memory
address.
MEM
,
SELECT
DELETE
MEM
1
Pick up the handset and press and hold
till a beep sounds.
Memory Store
SMITH JOHN
01
s
02 DOE JOHN
The LCD displays the memory dial list
beginning the location number 01.
Memory Store
2
3
Enter a two-digit number (01-20), or press
07
08
s
to select a free memory location
,
number.
Example: Selecting memory location number 07
Store Name
Press SELECT . The LCD displays the
following screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
MEMORY DIALING
4
Enter a name of up to 13 characters.
Press or repeatedly to enter a
Store Name
SMITH JOHN
space, alphanumeric characters: a space
→ A → B → ... → Y → Z → a → b → ... y
→ z → 0 → 1 → 2 ... 9 → → # → - → &
→ ( → ) → a space → A → ...
,
,
To enter the next character, press
To move the cursor to the left, press
.
.
Or, you can press DELETE to delete the entered character.
SELECT
5
6
Press
. The LCD displays the
Store Number
following screen:
Enter a telephone number to be stored.
Example: Enter “1 PAUSE 1234567890.”
Store Number
1P1234567890
NOTE:
By pressing
RDL/P
, you can insert a 2-second pause
in the memory dial to make a long distance
call or call through a PBX.
7
8
Press
. A confirmation beep sounds
SELECT
Store Number
and the number is stored.
Memory07 Stored
The LCD returns to Memory Store screen.
Memory Store
s
SMITH JOHN
To store more name and numbers, return to
07
08
step 2.
MEM
To finish the operation, press
the handset to the base unit.
or return
24
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
DIALING A STORED NUMBER
TALK
MEM
,
Dialpad
SELECT
MEM
1
Pick up the handset and press
.
01 SMITH JOHN
02 DOE JOHN
s
03 MOM AND DAD
Biacs
2
Press
,
or enter a two-digit number
(01-20) to display the desired destination.
NOTE:
To see the stored phone numbers, press
If appears next to the 12th digit, the number is
longer than 13 digits. Press to see the rest of
repeatedly to return to the
.
MOM AND DAD
8175551212
\
the numbers, and
name display.
When you press
number.
SELECT
, the LCD displays both the name and telephone
3
Press TALK . The stored number will be dialed.
NOTE:
If you press
MEM
while you are selecting a location, memory selection is
cancelled and the handset is put in standby mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
CHANGING AND DELETING STORED NUMBERS
You can delete a number or simply store another one in its place.
When you store a new phone number, the data stored in that memory
location is deleted automatically.
MEM
,
,
DELETE
SELECT
MEM
1
Pick up the handset and press and hold
till a beep sounds.
Memory Store
SMITH JOHN
02 DOE JOHN
01
s
2
3
4
Enter a two-digit number (01-20) or press
,
to select the memory location you
want to edit/delete.
Press . The LCD displays the
SELECT
s
Edit Memory01
Edit/Delete Memory screen.
Delete Memory01
Go Back
Press
or
to select the desired function and press
SELECT
. To edit the stored data, select “Edit.” To delete the
data, select “Delete.” To return to the previous screen,
select “Go Back.”
5
a
To edit data, go to step a. To delete data, go to step b.
EDITING THE NAME AND TELEPHONE NUMBER
Use the
,
,
, and
buttons to change the name.
(See “Storing Numbers” on page 23 for instructions on how
to enter names).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
DELETE
(1) Press
to erase a character at the
Store Name
SMITH JOH
cursor position.
The next character on the right moves to
the cursor position.
(2) Press SELECT . The LCD displays the
programmed numbers screen.
Store Number
123456789
DELETE
(3) Press
to erase numbers, and enter
the correct number.
SELECT
(4) Press
. A confirmation beep sounds
MEM
and the number is stored. Press
return the handset to the base unit.
or
Memory01 Stored
b
DELETING THE STORED DATA
Biacs
(1) Press
or
.
to move the pointer to select Delete Memory01?
Yes
or
s
No
DELETE
(2) Press
If
or
.
SELECT
is selected: A confirmation beep
sounds and the number is erased.
Memory01 Deleted
Memory Store
If
is selected: The LCD returns to the
programmed names screen.
01
s
SMITH JOHN
02 DOE JOHN
MEM
(3) Press
, or return the handset to the base unit.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
• Before you can take advantage of the Caller ID and Call Waiting
features, you must subscribe to these services from your local
telephone company.
• Name and number caller ID only work in conjunction with service
provided by your local telephone company.
ANSWERING A CALL WITH CALLER ID SERVICE
1
When the caller ID message is received, the display shows
the caller's phone number along with the date and time. The
incoming call information is stored in Caller ID record.
If the Caller ID service includes the caller's name, the caller's
name appears on the display (up to 15 letters).
Number of calls from the same phone number
The date and time received
Caller's name
Caller's phone number
5/11 12:30PM 01
SMITH JOHN
123-456-7890
You may receive any one of the following messages;
When invalid data is received . . . . . . . . . . . . .Incomplete Data
When a private name is received . . . . . . . . .Private Name
When a private number is received . . . . . . . . .Private Number
When an unknown name is received . . . . . . .Unknown Name
When an unknown number is received . . . . . .Unknown Number
2
When you pick up the phone, the display changes to "Talk"
(See page 19).
Talk
<High>
0:00
NOTES
• If you answer a call before the Caller ID message is received (Example before
the second ring), the Caller ID message will not appear.
• When the call is received via a telephone company that does not offer Caller
ID service, the caller's phone number and name do not appear (This includes
international calls).
• When the call is via a Private Branch eXchange (PBX), the caller's phone
number and name may not appear.
• Data errors appear as " ".
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
CALL WAITING
If you want to use the Call Waiting feature, you must subscribe to the
Call Waiting service provided by your local telephone company.
The LCD will show another incoming call even if you are currently
engaged in a telephone conversation. This feature can be enabled or
disabled. If enabled, it informs the user of a new incoming call by
generating short beeps at regular intervals until the call is either
answered, or the person calling hangs up. With Caller ID on call
waiting, you can see who’s calling to decide if you want to interrupt
your current conversation to answer the incoming call.
WITH CALLER ID SERVICE
FLASH
1
2
Before answering a call, check to see that the caller’s name
and telephone number are displayed on the screen. To
switch to the waiting call, press FLASH on the handset. The
first caller is put on hold.
erID/Clwating
To switch back to the first caller, press FLASH again.
NOTE:
Pressing
disconnect the current line.
FLASH
without having received a Call Waiting signal may
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
SEARCHING CALLER ID MEMORY
CID
,
To review who has called your phone, follow the steps below.
The caller ID memory retains a listing of the 50 most recent
callers.
1
Pick up the handset and press
.
CID
If new caller ID data does not exist:
Total:02
If there is new caller ID data:
New :01
Total:02
2
3
Press
to display the latest call record.
1/7
9:30AM 12
DOE JOHN
555-2563
If there is no more caller ID data when you
press
message.
, the LCD displays the following
End
Press CID to return to standby mode.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
DIAL OUT
TALK
CID
,
CID
1
2
Pick up the handset and press
press or
. Then,
1/7
9:30AM 12
SMITH JOHN
456-7890
to display the number you
wish to dial.
Press TALK .
TALK
4567890
The displayed number will be dialed.
NOTE:
To enter a number for a long distance call, see “EDITING CALLER ID DATA” page
32. It is not necessary to add a “1” when dialing some area codes. If in doubt,
check your local telephone directory.
erID/Clwating
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
EDITING CALLER ID DATA
You can edit the Caller ID data.
1
Pick up the handset and press CID . Then, press
or
repeatedly to display the Caller ID data you want to edit.
CID
L.D./1
LOCAL/3
L.D./1
LOCAL/3
2
Press
for a long distance call prefix “1” and
for area code setting and cancellation.
LOCAL/3
key
1/7
9:30AM 12
1/7
9:30AM 12
SMITH JOHN
456-7890
SMITH JOHN
123-456-7890
L.D./1
L.D./1
key
key
1/7
9:30AM 12
1/7
9:30AM 12
SMITH JOHN
1-456-7890
SMITH JOHN
1-123-456-7890
LOCAL/3
key
3
After editing Caller ID data, you can continue with dialing out
or storing procedures.
To dial out, press TALK (page 31).
MEM
To store into memory dial, press
(page 33).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
STORING TO SPEED DIAL MEMORY
1
2
Pick up the handset and press CID . Then, press
to bring up the number you wish to store into Speed Dial
memory.
or
Select Location
01
02
MEM
Press
.
s
The LCD displays the following screen.
3
4
Enter a two-digit number (01-20) or press
memory location.
to select
,
SELECT
Press
. A confirmation beep sounds and the Caller ID data
CID
is stored. Press
to return to standby mode.
If you select a memory location which is already stored:
(1) The LCD displays the following prompt:
Replace Memory?
Yes
No
(2) Press
to select
and press
s
SELECT
.
erID/Clwating
A confirmation beep sounds and the new data overwrites the
old data. The LCD returns to the Caller ID display screen.
If you select
:
The LCD returns to the Caller ID display screen.
CID
Press
to return to standby mode.
CUT
CUT
Wall mount template
IMPORTANT:
• Before mounting, select a wall area of sufficient
strength. If mounting on wallboard or in an area
of questionable strength, locate a stud for
maximum support of your telephone.
• Avoid electrical cables, pipes, or other items
behind the mounting location that could cause a
hazard.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
DELETING CALLER ID DATA
DELETE INDIVIDUAL CALLER ID DATA:
CID
,
DELETE
SELECT
CID
1
Pick up the handset and press
. Then, press
or
to display the caller ID number you wish to delete from the
memory.
Delete Message?
DELETE
2
3
Press
Press
.
s
Yes
or
to select Yesor No.
No
DELETE
Press
or
. If you select
, confirmation
SELECT
beeps are emitted and the LCD displays the next caller ID
data. If there is no more caller ID data, the LCD displays the
message “End.”
If you select
, the LCD returns to the Call ID data screen.
CID
4
Press
to return to standby mode.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
DELETE ALL CALLER ID DATA:
CID
,
DELETE
SELECT
CID
1
Press
screen.
. The LCD displays the following
New :01
Total:02
DELETE
2
3
Press
Press
.
Delete All?
Yes
or
to select Yesor No.
s
No
DELETE
SELECT
Press
or
.
If you select
, a confirmation beep
sounds and the LCD displays the total
Total:00
number of items “00”.
erID/Clwating
If you select
screen indicating the number of Caller ID
calls.
, the LCD returns to the
New :01
Total:02
CID
4
Press
to return to the standby mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Should any problem occur with the set, use the following simple tests to determine
whether or not servicing is required.
PROBLEM
No dialtone.
SOLUTION
• The AC adaptor of the base unit is disconnected.
→ Plug the AC adaptor into the base unit and the AC
120V outlet.
No calls come in.
• The battery is low.
→ Place the handset on the base unit to recharge.
• Telephone line cord is disconnected.
→ Check both ends of the telephone jack.
• The previous call is not disconnected.
TALK
→ Press
to disconnect the line.
• Trouble with the telephone line.
→ Check an extension line.
• Outlet used is controlled by a wall switch in its OFF
position.
→ Relocate it to another outlet.
• The digital security code is changed.
→ Disconnect the power and remove the handset. After a
few seconds, restore the power and place the handset
on the base unit for at least 3 seconds.
• The handset is too far from the base unit.
→ Bring the handset near the base unit.
Noise or interference.
• The handset is too far from the base unit.
→ Bring the handset near the base unit.
•
The battery is low.
→ Place the handset on the base unit to recharge.
• The base unit is located in a place with high interference.
→ Relocate it to another outlet.
• Interference from TV, appliances, etc.
CHANNEL
→ Press
to select a clearer channel, or relocate
the base unit.
• There may be line noise.
→ Check with another telephone.
• The volume control is set too high.
→ Reduce volume to a lower setting.
• The base antenna is not in a vertical position.
→ Lift the antenna to a vertical position.
Battery pack goes low
quickly.
• The battery pack was not fully charged at the initial
charging.
→ Charge the battery pack for 12 to 16 hours without any
interruption.
• The battery is several years old
→ Replace with a new battery
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM
SOLUTION
The handset battery
pack does not charge.
• The battery is not installed correctly.
→ Install the battery pack correctly.
• The charging contacts of the handset and base are not
clean.
→ Clean them with a dry cloth.
• The battery is several years old.
→ Replace with a new battery.
The unit operates
abnormally.
• The phone needs to be reset.
→ Disconnect the AC adaptor and reconnect it after a few
seconds.
“Low battery” blinks on
the display.
The operation is
stopped.
• The battery is low.
→ Recharge the battery.
• This is normal.
When the handset is
returned to the base
unit with the volume
level set at Loud, a
momentary squeal or
howling sound may
sometimes be heard.
→ It may be prevented by changing the volume setting to
High, Medium or Low before returning the handset to the
base unit
• You have to subscribe to Caller ID/Caller ID on Call Waiting
services.
→ Check with your local telephone company.
The phone does not
display the Caller
ID/Caller ID on Call
Waiting data.
• You answered the call before Caller ID data is received.
→ Let the phone ring twice before you answer the call.
AldIfrmation
37
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/SERVICE
SERVICE REQUIREMENTS
If the cordless telephone should malfunction, or need changes or modifications, all
repairs will be performed by an authorized Toshiba Service Station. This unit has been
registered with the FCC for direct connection to the telephone network. Under the
FCC program, no customer is authorized to repair this unit. This applies to units either
in or out of warranty. If an unauthorized repair is performed, the registration of the unit
for direct connection to the network will be null and void. If the unit is still in warranty,
the remainder of the warranty period will also be null and void.
It is the responsibility of users requiring service to report the need for service to the Toshiba
dealer.
IMPORTANT INSTRUCTIONS TO USERS
Your telephone equipment has been designed and constructed to conform to federal
regulations and can be connected to the phone line as described in this manual.
Please note that each product connected to the telephone line places a certain load
on the line. We designate this as the unit’s “Ringer Equivalence Number.”
It is most unlikely, but...If your telephone equipment should cause problems on the
phone line, the phone company has the right to temporarily discontinue your service. If
this happens, the phone company will notify you and give you the opportunity to
correct the problem. Also, you need to know that the phone company does have the
right to make changes in their lines and/or equipment.
If these changes might affect your telephone equipment (or require changes in the
telephone equipment or its connection), the phone company will notify you in writing,
so you have the chance to take whatever action necessary to ensure uninterrupted
phone service.
FCC REQUIREMENTS
You are no longer required by the FCC to notify your local telephone company of your
intent to connect a new telephone. Your local telephone company may call you and
request information about your phone such as: the brand name, model number,
registration number, and ringer equivalence number. This information is provided on a
label located at the bottom of the base unit and handset.
You may not directly connect your telephone equipment to coin telephone services.
Check with your local telephone company if you wish to connect your telephone
equipment to a party line service. Some party line services require a special adaptor
or modification to your telephone.
It should be noted that some cordless telephones operate at frequencies that may
cause interference to nearby TVs and VCRs; to minimize or prevent such interference,
the base of the cordless telephone should not be placed near or on top of a TV or
VCR; and, if interference is experienced, moving the cordless telephone farther away
from the TV or VCR will often reduce or eliminate the interference.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/SERVICE
TELEPHONE/TELEPHONE ANSWER MACHINE LIMITED WARRANTY
Toshiba America Consumer Products.Inc(“TACP”) and Toshiba Hawaii,Inc.(“THI”) make the following
limited warranties. These limited warranties extend to the original consumer purchaser or any person
receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
(3) Within the continental U.S.A., if you should
find a defective product within the warranty period
please call 1-877-644-7373.
Limited One(1) Year Warranty of Labor
and parts
TACP/THI warrant this product and its parts
against defects in materials or workmanship for a
period of one(1) year after the date of original retail
purchase. During this period, TACP/THI will repair
or replace your defective product with a new or
refurbished unit at our option.
(4) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to
any product or parts which have been lost or
discarded by you, or to damage to products or parts
caused by misuse, accident, damage caused by Acts
of God, such as lightning or fluctuations in electric
power, improper installation, improper maintenance
or use in violation of instructions furnished by us;
or to units which have been altered or modified
without authorization of TACP/THI, or to damage
to products or parts thereof which have had the
serial number removed, altered, defaced or
rendered illegible.
Owner’s Manual
You should read the owner’s manual thoroughly
before operating this product.
Your Responsibility
The above warranties are subject to the following
conditions.
(1) You must provide a copy of your bill of sale or
other proof of purchase.
(2) These warranties are effective only if the
product is purchased and operated within the USA
or Puerto Rico.
(5) Physically damaged products are not acceptable
for repair or exchange within or after the warranty
period expires.
How to Obtain Warranty Service
In the event a problem should develop with your product, please proceed as follows;
In The Continental United States contact: In Hawaii contact:
Toshiba Hawaii, Inc.
327 Kamakee Street,
Honolulu, HI 96814
(808)-591-8377
All warranties implied by state law, including the implied warranties of merchantability and fitness for a
particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the
exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and
in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller
with respect to the repair or replacement of any parts. In no event shall TACP/THI be liable for
consequential or incidental damages.
AldIfrmation
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time within which an action must be commenced to
enforce any obligation of TACP/THI arising under the warranty or under any statute, or law of the United
States or any state thereof, is hereby limited to ninety(90) days from the date you discover, or should have
dicovered, the defect. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state
to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may
not apply to you.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
To use this feature, you must subscribe to the Caller ID service provided by your telephone company.
SETTING THE AREA CODE
CALLER ID SERVICE
Making a call with Caller ID data
QUICK
REFERENCE
GUIDE
CALLER ID CORDLESS TELEPHONE
SG-1600
SG-1800
Deleting Caller ID data
3
1 Press FUNCTION , then press
.
2 Press SELECT and enter a 3-digit area
CID
1 Press
, then press
or
to display
CID
1 Press
, then press
or
to display the
code.
Read the Owner’s Manual for details.
the number you wish to dial.
Caller ID number you wish to delete from the memory.
3 Press SELECT , then press
.
FUNCTION
1/7 9:30AM 12
SMITH JOHN
DELETE
2 Press
Press
Delete Message?
.
SETTING UP THE BASE UNIT
or
to select Yes or No.
456-7890
TALK
,
CID
Set the TONE/PULSE switch for the type of dialing service you have.
3
,
Fasten the AC
adaptor cord.
s
Yes
CID
TALK
2 Press
.
SELECT
No
The displayed number will be dialed.
FUNCTION
SELECT
DELETE
TALK
4567890
SELECT
DELETE
. If you select Yes, a
3 Press
or
Raise the
antenna to
vertical position.
confirmation beep is emitted and the LCD displays
the next Caller ID data. If there is no more Caller ID
data, the LCD displays the message “END”.
If you select No, the LCD returns to the Caller ID data
screen.
Note:
For long distance calls, you need a prefix “1” and the area
L.D./1
LOCAL/3
Single-Line
Telephone Jack
(RJ11C)
code. Press
area code before press
and
TALK
to add “1” and the
Telephone Line Code
.
CID
4 Press
to return to standby mode.
Power Outlet
(AC 120V, 60Hz)
AC Adaptor
Caller ID on Call Waiting
Storing Caller ID data to Speed dial memory
ANSWERING A CALL
MAKING A CALL
To use this feature, you must subscribe to the Caller ID on Call Waiting service provided by
your telephone company.
1 Key-in the phone
1 When a call is
received,
CHARGING THE BATTERY PACK
CID
1 Press
, then press
or
to bring
number (max. 32
digits).
up the number you wish to store into Speed
dial memory.
“Incoming call”
appears on the
LCD.
1 Before answering a call, check to see that the
caller’s name and telephone number are displayed
on the screen. To switch to the waiting call, press
Black
Red
1 Remove the battery compartment cover by sliding it
2 Press
.
TALK
3 To hang up, press
or place
down.
2 Press MEM . “Select Location” appears on
MEM
,
CID
the LCD.
2 Plug the battery pack cord into its socket, observing
2 Press
to
TALK
connect.
FLASH
.
TALK
the correct polarity.
3 Press
,
or enter a memory location
TALK
TALK
the handset on
the base unit.
The first caller is put on hold.
number on the dialpad.
3 Insert the battery pack . Then close the battery
3 To hang up, press
or place
FLASH
FLASH
2 To switch back to the first caller, press
compartment cover.
TALK
SELECT
SELECT
4 Press
. A confirmation beep
again.
Dialpad
the handset on the
base unit.
4 Place the handset on the base unit. You can place
sounds and the Caller ID data is stored.
the handset with the dialpad facing up or down.
Press CID to return to standby mode.
IMPORTANT
Charge the battery pack for at least 12 to 16 hours.
IN USE/
CHARGE
LED
Charging contacts
UCZZ69701BA
For more detailed instructions and examples, please refer to the owner’s manual.
RC009261
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
Para utilizar esta función, deberá subscribirse al servicio de identificación del que llama provisto por su compañía telefónica.
AJUSTE DEL CÓDIGO DE ÁREA
SERVICIO DE IDENTIFICACIÓN DEL QUE LLAMA
Realización de llamadas con los datos de
identificación del que llama
REFERENCIA
RÁPIDA
CALLER ID CORDLESS TELEPHONE
SG-1600
SG-1800
Borrado de un dato de identificación del que llama
1 Presione
, después presione
FUNCTION
3
.
CID
1 Presione
, después presione
o
para
Para los detalles, lea el manual de instrucciones (en inglés).
2 Presione SELECT e introduzca un código
CID
1 Presione
, después presione
o
visualizar la identificación del que llama cuyo número
desee borrar de la memoria.
de área de 3 dígitos.
para visualizar el número que desee marcar.
INSTALACIÓN DE LA UNIDAD BASE
3 Presione SELECT , después presione
1/7 9:30AM 12
SMITH JHON
456-7890
DELETE
2 Presione
Presione
.
.
FUNCTION
Ajuste el selector de tono/pulso (TONE/PULSE) al tipo de servicio que posea.
o
para seleccionar Yes (sí) o No.
,
3
TALK
,
CID
Afirme el cable del
adaptador de CA.
CID
Delete Message?
SELECT
s
Yes
TALK
2 Presione
.
No
FUNCTION
SELECT
DELETE
El número visualizado se marcará.
TALK
4567890
SELECT
Levante la antena en
posición vertical.
DELETE
. Si selecciona Yes,
3 Presione
o
se emitirá un pitido de confirmación y el visualizador
de cristal líquido mostrará el próximo dato de
identificación del que llama. Si no hay más datos de
identificación del que llama, en el visualizador de
cristal líquido aparecerá el mensaje “END”.
Si selecciona No, el visualizador de cristal líquido
volverá a la pantalla de datos de identificación del
que llama.
Nota:
Para llamadas de larga distancia, necesitará fijar de antemano “1” y el código de área.
L.D./1 LOCAL/3
Toma telefónica de
línea única (RJ11C)
Cable de la línea
Presione
y
para añadir “1” y el código de área antes de presionar
TALK
.
telefónica
Toma de electricidad
(120V CA, 60Hz)
Adaptador de CA
Almacenamiento de datos de identificación del
CONTESTACIÓN DE
que llama para la memoria de marcación rápida
REALIZACIÓN DE
CID
4 Presione
para volver al modo de espera.
LLAMADAS
LLAMADAS
CID
1 Presione
, después presione
o
CARGA DE LA BATERÍA
para que aparezca el número que desee
almacenar en la memoria de marcación
rápida.
Identificación del que llama con la llamada en espera
1 Marque el número
1 Cuando se reciba
una llamada, en el
visualizador de
cristal líquido
Negro
Rojo
1 Quite la tapa del compartimiento de la batería
de teléfono (32
dígitos como
máx.)
deslizándola hacia abajo.
MEM
,
CID
Para utilizar esta función, deberá subscribirse al servicio de identificación del que llama con la
llamada en espera provisto por su compañía telefónica.
2 Presione MEM . En el visualizador de cristal
líquido aparecerá “Select Location”
(Seleccione la ubicación).
2 Conecte el cable de la batería en el enchufe,
aparecerá
“Incoming call”.
observando la polaridad correcta.
2 Presione
.
TALK
3 Para colgar,
presione
1 Antes de contestar a una llamada, compruebe que
el nombre del que llama y el número de teléfono
están visualizados en la pantalla. Para cambiar a la
3 Inserte la batería. Luego cierre la tapa del
3 Presione
,
o introduzca un número de
2 Presione
TALK
SELECT
TALK
TALK
compartimiento de la batería.
o
TALK
asignación de la memoria en el teclado de
marcación.
para conectarse.
vuelva a colocar
el microteléfono
sobre la unidad
base.
FLASH
llamada en espera, presione
.
4 Coloque el microteléfono sobre la unidad base.
Usted podrá colocar el microteléfono con el teclado
de marcación encarado hacia arriba o abajo.
3 Para colgar,
La primer llamada se pondrá en espera.
Teclado de
marcación
SELECT
4 Presione
. Sonará un pitido de
presione
o
TALK
confirmación y el dato de identificación del
que llama se almacenará. Presione
para volver al modo de espera.
2 Para volver a la primer llamada, presione otra vez
vuelva a colocar el
microteléfono
sobre la unidad
base.
FLASH
CID
FLASH
.
IMPORTANTE
Cargue la batería durante 12 a 16 horas como mínimo.
IN USE/
CHARGE
LED
Contactos de carga
Para más instrucciones y ejemplos detallados, consulte el manual de instrucciones.
UCZZ69701BA
RC009261
Download from Www.Somanuals.com. All Manuals Search And Download.
For technical assistance, purchase of accessories
IMPORTANT
We suggest you record the following information and retain for
your records along with your bill of sale or equipment document.
Model no.__________________ Serial no.______________
Purchase date______________ Dealer_________________
Dealer address _____________________________________
2000 TOSHIBA AMERICA CONSUMER PRODUCTS, INC.
©
UCZZ01701BA
RC009260
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|