®
ViewSonic
N3251w
LCD TV
- User Guide
- Guide de l’utilisateur
- Guía del usuario
®
ViewSonic
Model No. : VS11335-1M
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the
cables which are included with the equipment or specified. Also, any unauthorized changes or
modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this device.
ViewSonic
N3251w
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV”
in this guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the plug does not fit into your outlet, consult an electrician for
replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near
the equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.
15. This product is only to perform the useful function of entertainment and visual display
tasks are excluded.
ViewSonic
N3251w
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
®
Copyright © ViewSonic Corporation, 2006. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
For Your Records
Product Name:
N3251w
ViewSonic LCD TV
VS11335-1M
Model Number:
Document Number:
Serial Number:
Purchase Date:
N3251w-1M_UG_ENG Rev. 1A 03-31-06
_________________________________
_________________________________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. Your local waste disposal company may provide
information about proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with
environmental laws of your location.
ViewSonic
N3251w
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Installation Instructions
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and built-up static charges, Article 810
of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the
power cord during a heavy storm lighting may strike while you are holding the cable cord, causing serious
injury; turn off your LCD TV and wait for the weather to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with them
might be fatal.
Antenna
Ground clamp
Antenna discharge unit
Electric service equipment
Ground clamps
Grounding conductors
Power service grounding electrode system
Cleaning the LCD TV
• Make sure the LCD TV is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft,
lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent
onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or
case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic
will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
ViewSonic
N3251w
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Congratulations on your purchase of a ViewSonic® LCD TV.
Important! Save the original box and all packing material for future shipping needs.
Package Contents
Your LCD TV package includes:
• LCD TV
• 44-Key Remote Control with batteries
• RCA Cable
• ViewSonic User Guide
• Power Cord
• VGA Cable
• Quick Start Guide
ViewSonic
N3251w
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front View of the Product
1
2
3
4
5
6
7
8
1 Volume Down
Decrease sound volume or adjust a highlighted control while in OSD menu.
2
Volume Up
Increase sound volume or adjust a highlighted control while in OSD menu.
Menu
3
4
5
6
Turn OSD menu ON/OFF.
CH Down
Channel down when source is at TV/DTV or select a control while in OSD menu.
CH Up
Channel up when source is at TV/DTV or select a control while in OSD menu.
ENTER
To highlight a control in OSD menu.
Power ON/OFF button
7
8
Power LED Indicator / Remote Control Receiver
Dolby and the double-D symbol are registered trademarks of
Dolby Laboratories.
(Only for DTV source in this model.)
Note:
1. Press VOL+ and MENU buttons at the same time to lock power button, and press
VOL+ and MENU buttons again to unlock it.
2. Press VOL- and VOL+ buttons at the same time to lock OSD menu, and press
VOL- and VOL+ buttons again to unlock it.
ViewSonic
N3251w
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View of the Product
A
B
C
D
E
F
G
I H
Analog TV input
A
B
C
Connect to NTSC TV source.
Digital TV input
Connect to ATSC TV source.
S-Video input
Connect this port to the S-Video output of A/V device.
AV/ S-Video signal Audio input (left/right)
D
E
Connect this port to the RCA audio output connectors of your A/V device.
YPbPr signal Audio input (left/right)
Connect this port to the RCA audio output connectors of your A/V device.
YPbPr signal input
Connect this port to the YPbPr output of A/V device.
F
G Composite Video input
Connect this port to the composite video output of A/V device.
Audio output
H
I
Connect this port to your A/V device with audio in (RCA) connectors or to audio amplifier.
PC Audio input
Connect this port to PC line out jack.
VGA signal input
Connect this port to the VGA output of your PC.
HDMI Input Terminal
Connect this port to the HDMI output of A/V device.
SPDIF Optical output
Connect this port to the SPDIF input of A/V device.
Headphone Jack
Connect this port to your headphone.
Power (AC input)
Using power cord provided, connect to a power source.
ViewSonic
N3251w
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
ViewSonic
N3251w
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control button function as follow
1 POWER
Power ON/OFF
MTS
Select Mono, Stereo or SAP in TV / Select audio language
in DTV
2
INFO
Display current information
Set TV Sleep timer
3
4
SLEEP
SOUND
Select sound modes
5
0~9, 100/- number button Directly channel select
6
VOL+ and VOL-
GUIDE
Adjust volume UP/DOWN
7
Show electronic program guide (EPG)
To skip or restore Favorite Channels
8
FAV.A/D
9
UP/ DOWN /LEFT/ RIGHT/ UP/ DOWN/ LEFT/ RIGHT: Navigate and adjust OSD
10
ENTER
function
ENTER: Enter the function setting
INPUT
ZOOM
FREEZE
P. POS
C.C
Input source select
11
12
13
14
15
Adjust window size
“Freeze-Frame” the current screen
Adjust sub-screen window position
Displaying captions during closed caption source and
closed caption mode select
P.SIZE
Adjust sub-screen window size
Volume mute ON/OFF
16
17
18
19
20
21
22
23
24
25
MUTE
TV/DTV
PICTURE
RETURN
CH▲ and CH▼
FAV. CH
MENU
Swap between TV/DTV. Swap to TV when in other source
Select picture modes
Return to previous channel
Adjust Channel UP/DOWN
Select from preset Favorite Channels
On Screen Display (OSD) menu ON/OFF
Change the image size
WIDE
PIP/POP
Toggle to enable/disable Picture in Picture/Picture Out of
Picture function
P.INPUT
V-CHIP
SWAP
POP/PIP input source select
Set V-Chip rating
26
27
28
Switch between main screen and sub-screen
Note: PIP means Picture In Picture. POP means Picture Out Of Picture.
ViewSonic
N3251w
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1. Insert Remote Control Batteries
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
CAUTION
•
•
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries
incorrectly may result in cracking or leakage, which may pose a risk of fire or
lead to personal injury.
•
•
•
•
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
When the remote control will not to be used for an extended period, remove
the batteries.
2. Connecting RF antenna, Cable TV Wire or DTV cable
Make sure the power is OFF before installing your LCD TV.
1) TV: Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial
cable. Preset the TV channels into memory with Auto Scan function when
using an antenna or cable TV system without a cable connecter box (See
page 19).
RF Cable or Adapter
(not supplied)
ViewSonic
N3251w
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2) DTV: Connect the LCD TV to the cable with DTV signals and preset DTV
channels into memory with AUTO SCAN function in DTV menu (see page 21).
Antenna
(not supplied)
3. Connecting to DVD / Set Top Box
Connect Video/ Audio cables from compatible devices into the back panel of LCD TV.
1) With AV cable:
RCA A/V Cable
VCR or DVD Player
2) With S-Video cable:
S-Video Cable
(not supplied)
Audio in Cable
(not supplied)
VCR or DVD Player
ViewSonic
N3251w
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3) With YPbPr cable:
YPbPr Cable (not supplied)
Audio in Cable (not supplied)
VCR or DVD Player
4) With HDMI cable:
VCR or DVD Player
(DVD Player should have
the HDMI output terminal)
HDMI Cable (not supplied)
4. Connecting to External Stereo System to Listen to LCD TV Sound
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo
system (stereo system sold separately).
Audio in Cable
(not supplied)
Stereo system
ViewSonic
N3251w
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connecting to the Headphone
Connect the headphone to the headphone output terminal of the LCD TV.
(Headphone sold separately).
Headphone
(not supplied)
6. Connecting to a Computer
Connect the VGA cable from VGA output of computer to the VGA terminal input of
your LCD TV.
PC
VGA 15 Pin Cable
7. PC Audio In
Connect the Audio cable (green) from audio output of your computer to the audio
input terminal (green) of the LCD TV.
PC
PC Audio Connection
(not supplied)
ViewSonic
N3251w
13
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Connecting to A/V Device with SPDIF input
Connect SPDIF optical cable from A/V device into the SPDIF output connector of
LCD TV.
Audio Cable
(not supplied)
A/V Device
SPDIF Optical Cable
Stereo System
9. Connecting with the power cord
Connect the power cord to the AC inlet on the back of your LCD TV, after all
connections have been completed, and plug the other end of the power cord into
a correctly grounded electrical outlet.
AC wall socket
ViewSonic
N3251w
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
To operate your LCD TV, you may use the TV remote control or top panel buttons to
select input source, change channels, or adjust volume.
Turning the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug, and the power LED indicator will light red.
Power On/Off
To turn the LCD TV on/off:
Press the POWER button under the LCD TV, or press the POWER button on your
remote control to turn on/off the TV. The power LED indicator lights green when the
LCD TV is on.
Selecting input source
To select the required input source:
Press the INPUT button on the remote control, Use ◄► to select the required input
source between TV, DTV, HDMI, YPbPr, AV, S-Video, and VGA.
To confirm the selection, press ENTER.
Volume adjusting
Press VOL+/- to adjust the volume.
To silence volume, press MUTE.
If you want to restore volume, press MUTE again, or press VOL+/- directly.
INFO
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or
some of the information about Input, Channel, Resolution, Audio Type, Smart Sound
Modes, and Smart Picture Modes, depending on what input source it is in.)
TV
DTV
Main Window
Input
TV
(Program title.)
Channel
Resolution
Audio Type
1
TVBS
2-1
RF2-1
NTSC
Stereo
1080i HD
MONO
User
Smart Sound Mode
Smart Picture Mode
(Program details.)
User
ViewSonic
N3251w
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV Guide
To see the electronic program guide of the channel, press the GUIDE button on your
remote control. It will display the background information related to the channel program.
Picture
Press the PICTURE button on the remote control to switch between the Smart
Picture modes of User, Cinema, Sport, Vivid, and Hi-Bright.
Sound
Press the SOUND button on the remote control to switch between the Smart Sound
modes of User, Rock, POP, Live, Dance, Techno, Classic, and Soft.
Channel Select
Press number key or CH ▲/▼ button to select your desired channel.
1. In TV mode
The 100/- button functions as “100”.
If your desired channel is below 100, directly press number buttons. If your desired
channel is over 100, press 100/- button first, and then press the other two number
buttons.
Ex: Your desired number is 8.
Press 0 → press 8, or press 8 only.
Ex: Your desired number is 110.
Press 100/- → press 1 → press 0.
Return to the previous channel, press RETURN button.
＊
2. In DTV mode
The 100/- button functions as “-“. Use 100/- button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press 100/- → press 3.
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to
automatically shut off the LCD TV after a preset period of time passed. There are
several times for choice – OFF, 30min, 60min, 90min, or 120min.
ViewSonic
N3251w
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom
Press ZOOM button repeatedly to select the screen size. You can select from 1/8,
1/4, 1/2, 1, x2, x4, and x8.
Favorite Channel
You can press FAV.CH button to watch your favorite channels.
Use FAV.A/D button to add the current channel to your favorite channels, or to delete
it from your favorite channels. You can add up to 10 favorite channels.
Freeze Picture
Press FREEZE button to freeze picture. However, the sound still continues.
Using the OSD function
You can use the OSD menus and options to adjust various settings by using the
remote control.
The basic operation is as following:
• Press MENU to display OSD Menu.
• Press ◄► to select your desired top Menu.
• Use ▲▼ to select the control you want to adjust.
• When selecting the control with Press <Enter>, press ENTER to enable the
function.
• Press ◄► to adjust the settings.
• Press MENU to exit from the OSD menu.
ViewSonic
N3251w
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Functions
ADVANCED OPERATION — OSD MENU
Video Menu — Adjusting the picture quality
Video Menu is active in all but the VGA input source.
Contrast: To adjust contrast of video. (right: Max, left: Min).
Brightness: To adjust luminance of video. (right: Max, left: Min).
Color: To adjust color. (right: brilliant color, left: pale color).
Tint: To adjust tint level. (right: greenish tone, left: reddish tone).
Sharpness: To adjust picture sharpness. (right: sharper, left: softer).
•
•
•
•
•
Note: To adjust the Video settings, Smart Picture must be set to the User mode. (Select
through the Picture button on the remote control)
Audio Menu — To set the audio quality and status
Audio Menu is active in all but the VGA input source.
Bass: To adjust bass.
Treble: To adjust the treble
Balance: To adjust left and right audio balance.
Surround: To enjoy a concert hall effect, select On when stereo is playing.
Audio Out: To control sound output ON/OFF from the RCA audio out connectors.
•
•
•
•
•
Note: To adjust the Audio settings, Smart Sound must be set to the User mode. (Select
through the Sound button on the remote control)
ViewSonic
N3251w
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Menu — To set up for TV
It is only active in TV source.
Tuner Mode: To select Cable or Air as the TV source.
Auto Scan: To auto scan the TV channels. Press ENTER to start auto scanning TV
channels. Press ENTER again at any time to interrupt scanning.
•
•
TV: To select the TV channel to be skipped. Press ◄► to change channel.
Channel Add/Del.: Select Delete to skip the channel appointed, or select Add to restore
the channel appointed.
•
•
Channel Edit: Press ENTER to edit a name for the channel appointed. Use ▲▼◄► to
select the letters you want, and use BackSpace key to delete backwards. Move the cursor
to OK and then press ENTER to complete and save the channel name. To cancel editing,
choose Cancel or exit without pressing OK.
•
Setup Menu — To set up OSD window
Setup Menu is active in all input sources.
Language: To select a OSD language from English, French or Spanish.
Parental: To set up parental control.
•
•
ViewSonic
N3251w
19
Download from Www.Somanuals.com. All Manuals Search And Download.
When you enter this control, the screen below will be displayed.
The factory default of the password is “0000”.
To enable parental control, input the password, press ▼ button to focus on “ok” key, and
press ENTER. (select Cancel if you want to exit)
After entering, the following screen will be shown.
Channel Lock: To lock channels. Use ◄► to select the channel you want to lock, and
then press ENTER to lock or unlock it.
Change Password: To change the password, press ENTER and enter the password again.
Press ENTER, and the following screen appears.
Enter the new password, use ▼ to move the cursor down, and then enter the new
password again, press OK to confirm or Cancel to exit.
Note: Please make sure you remember your new password after changing, because you
cannot recall the default setting of the password by any selection.
Clear All: To clear all the locks set before, press ENTER.
Press MENU to return to the previous page.
Color Temperature: To select the color temperature from Warm, Cold, Normal or User.
(If you select User, you can adjust the degree of R, G, B in Color Temp. to suit your
personal preference.)
•
Back Light: To adjust the luminance of the back light.
Aspect Ratio: To select image size between Normal, Full, Wide1, Wide2, Wide3, 4:3,
16:9, and No scale.
•
•
OSD Timeout: To setup the display time of OSD. (5, 15, 45, and 60 seconds)
Memory Recall: To restore the factory default settings.
•
•
ViewSonic
N3251w
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV Menu — To set up DTV settings
It is only active in DTV sources.
Audio Language: To select an audio language from English, French, or Spanish.
Time Zone: To select Time Zones.
SPDIF Type: To select the type of audio transfer file format.
Auto Scan: Press ENTER to start scanning DTV channels automatically. Press MENU at
any time to cancel Auto Scan.
•
•
•
•
Manual Scan: To scan the DTV channels manually.
•
Press ENTER and select Scan Mode with ◄►.
ViewSonic
N3251w
21
Download from Www.Somanuals.com. All Manuals Search And Download.
When in Add-on Mode, Press ENTER to start scanning all channels, and press MENU at
anytime to cancel scanning.
When in Range Mode, use ▲▼ and number buttons to set the scanning range.
Press ENTER to start scanning, and press MENU at anytime to cancel scanning.
Channel Skip: To skip channels when viewing channels with CH ▲ and ▼.
•
Press ENTER, and then use ENTER to check/uncheck the channel you want to skip.
ViewSonic
N3251w
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Block: Press ENTER to enter the password and block/unblock the channel(s).
Caption: To select closed caption signal formats and set up caption modes. (CC1~CC4,
Service1~Service 6)
•
•
Use ▲▼ to select Analog Closed Caption or Digital Closed Caption, and then use ◄►
to select caption types.
Move the cursor to Caption Style, and press ENTER.
Use ◄► to select Caption Style from As Broadcaster or Custom.
When Custom is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed
settings.
Font Size: To select a font size from Large, Small, or Medium.
Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or
Magenta.
Font Opacity: To select font opacity from Solid, Translucent, or Transparent.
Background Color: To select background color.
Background Opacity: To select background opacity.
Window Color: To select window color.
Window Opacity: To select window opacity.
ViewSonic
N3251w
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VGA Menu — To set up for computer
It is only active in VGA sources.
Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position,
fine tune and H-Size.
•
Contrast: To adjust contrast of the video.
Brightness: To adjust luminance of the video.
Fine Tune: To adjust the delay time of data and clock to reduce noise in picture.
Manual Clock: To adjust the horizontal pixel clock of the video.
H Position: To adjust the horizontal position of the picture.
V Position: To adjust the vertical position of the picture
•
•
•
•
•
•
ADVANCED OPERATION — REMOTE CONTROL
V-Chip Menu
V-Chip is transmitted from TV station to help parents monitor what their children watch.
According to the pre-set of factory, viewers can see all of the channels. However, setting
V-Chip can block the appointed channels.
To set up V-CHIP function: Press V-CHIP button → enter the password → press ENTER,
and the following screen will be displayed.
Note: The factory default of the password is “0000”. If you have changed the password,
please make sure you remember the new password, because you cannot recall the
default setting of the password by any selection.
Use ▲▼ to select your desired optional item, and press ENTER.
ViewSonic
N3251w
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Block MPAA Rating: To adjust movie blocking level in the US. You can select between
•
NONE, G, PG, PG-13, R, NC-17, or X.
The movie Ratings in the US are defined as following.
G
General audience
R
Restricted
NC-17 No one 17 and under limited
X Adult audience only
PG
Parental guidance suggested
PG-13 Parents strongly cautioned
Use ENTER button to block or unblock the ratings, and use MENU to exit.
Block TV Rating: To adjust TV blocking level in the US. You can select between TV-Y,
•
TV-Y7, TV-G, TV-PG, TV-14, or TV-MA.
The TV Rating in the US are defined as following.
TV-Y All children
TV-PG Parental guidance suggested
TV-Y7 Directed to older children: this
program is designed for children
age 7 and above
TV-14 Parents strongly cautioned: this
program contains some material
that is unsuitable for children under
14 years of age
TV-G General audience
TV-MA Mature audience only
Use ENTER button to block or unblock the ratings, and use MENU to exit.
ViewSonic
N3251w
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian English Rating: To adjust blocking level in English-speaking region of Canada.
•
You can select between CE_E, CE_C, CE_C8, CE_G, CE_PG, CE_14, and CE_18.
The TV Ratings in English-speaking region of Canada are defined as following.
CE_E Exempt
CE_PG Parental guidance
CE_C Children
CE_14 Viewers 14 years and older
CE_18 Adult programming
CE_C8 Children eight years and older
General programming, suitable for
all audiences
CE_G
Use ENTER button to block or unblock the ratings, and use MENU to exit.
Canadian French Rating: To adjust blocking level in French-speaking region of Canada.
•
You can select between CF_E, CF_G, CF_8ANS, CF_13ANS, CF_16ANS, and CF_18ANS.
The TV Ratings in French-speaking region of Canada are defined as following.
CF_E
Exempt
CF_13ANS This emission can not be appropriate
to the children of less than 13 years
General
CF_G
CF_16ANS This emission is not appropriate for
less than 16 years
CF_8ANS General-Disadvised to
CF_18ANS This emission is reserved to the
the young children
adults
Use ENTER button to block or unblock the ratings, and use MENU to exit.
Block MPAA Unrated: To block unrated movies.
Block TV None Rating: To block unrated TV programs.
•
•
ViewSonic
N3251w
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP/POP
PIP/POP button allows you to watch two screens from different sources at the same time.
(PIP is picture in picture; POP is picture out of picture)
Press PIP/POP on the remote control repeatedly.
The screen will change from normal screen → PIP screen → POP screen.
PIP Screen
POP Screen
PIP Input Source Select
•
1. Press P.INPUT button to select input source for sub-screen as following.
Main Screen
TV
Available Sub-Screen Input Source
DTV / HDMI / YPbPr / VGA
DTV
TV / YPbPr / AV / S-Video / VGA
TV / YPbPr / AV / S-Video / VGA
TV / DTV / HDMI / AV / S-Video
DTV / HDMI / YPbPr / VGA
HDMI
YPbPr
AV
S-Video
VGA
DTV / HDMI / YPbPr / VGA
TV / DTV / HDMI / AV / S-Video
2. Use ◄► to select the sub-input source and press ENTER to confirm.
Note: To select the input source for main screen, press INPUT button.
SWAP: Press SWAP to exchange main screen to sub-screen, including video and sound.
•
The function is available both in PIP and POP.
ViewSonic
N3251w
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP Size Select: Press P.SIZE to select the size of sub-screen. The function only acts on PIP.
PIP Position Select: Press P.POS to select the position of sub-screen. The function only
acts on PIP.
•
•
Note that the screen indexed with the pink frame is the screen you select to set up.
Use ◄► to move the index between the main screen and the sub-screen.
ViewSonic
N3251w
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Specifications
LCD
Type
31.51” TFT Active Matrix RGB
0.51075 (H) x 0.51075 (V) mm pixel
RGB vertical stripe
Color Filter
Glass surface
Anti-Glare
Input signal
RGB
RGB analog (0.7/1.0 Vp-p, 75 ohms)
Separate Sync,
f : 30-80 kHz, f :50-75 Hz
h
v
RF
Video
TV system Antenna / NTSC+ATSC
1 composite RCA, 1 S-Video,
1 YPbPr component, 1 HDMI
Audio
PC
1 mini-stereo, 2 pair of RCA (L/R) stereo
Compatibility
Resolution
Up to 1360 x 768 Non-interlaced
Recommended 1360 x 768 @ 60 Hz
and supported
1280 x 1024 @ 60 Hz
1024 x 768 @ 60, 75 Hz
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
Speaker Output
Audio Output
10W x 2 @ THD=10%
1 composite RCA (L/R), 1 SPDIF (optical),
1 Headphone jack, 1 stereo jack
Power
Voltage
100-240 VAC, 50/60 Hz (auto switch)
Display area
Full Scan
697.68mm (H) x 392.25mm (V)
27.5” (H) x 15.4” (V)
Operating conditions
Storage condition
Temperature
Humanity
Altitude
32°F to + 104°F ( 0°C to + 40°C)
10% to 65% (no condensation)
To 10,000 feet (3,000m)
Temperature
Humanity
Altitude
-4°F to + 140°F (-20°C to + 60°C)
10% to 90% (no condensation)
To 40,000 feet (12,000m)
Dimensions
Weight
Physical
807.7mm (W) x 626.6mm (H) x 242.4mm (D)
31.8’’ (W) x 24.7’’ (H) x 9.5’’ (D)
Net
21.7 kg (47.7 Ib)
Regulations
UL, FCC-B (Doc-B), NOM, BEST-7
Power consumption
On
Stand by
< 150 W (green LED)
< 3 W (red LED)
Preset Timing Mode (Pre-adjusted to GTF® 1360 x 768 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates;
doing so may result in permanent damage to the LCD TV.
Note: Product Specifications are subject to change without notice.
ViewSonic
N3251w
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No power
• Make sure the LCD TV is properly connected.
• Make sure the AC power cord is properly connected.
• Make sure the AC power is ON, DC power button is ON (Green LED).
• Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage.
Poor or no picture
• The TV station may be experiencing problems. Try another channel.
• The Cable TV signal may be scrambled or encoded. Please contact your local cable
operator.
• Make sure that connection to other components are correct.
• Make sure that setup has been done correctly after connections.
• Make sure the correct input is selected and the input signal is compatible.
Strange color, light color, or color misalignment
• Ensure that the video cable is securely connected.
• The picture may appear dim in a brightly lit room.
• Adjust brightness and contrast.
• Check the input signal setting.
No sound
• Check your audio connections
• The MUTE button may have been pressed, try pressing this button again.
• Check your audio settings, your TV audio may be set to minimum.
• Press the Volume + (Up) button on the remote control.
Remote control unit does not operate
• Make sure batteries are inserted correctly.
• Batteries could be weak or dead. Replace batteries.
• Is a fluorescent light illuminated near the remote control sensor?
• The path of the remote control beam may be blocked. Make sure the path is clear and that
the remote control is aimed at the remote control sensor on the TV.
• Press only one button at a time and it is the correct one for the operation you want to
perform.
Unit cannot be operated
• External influences such as lightning or static electricity may cause improper operation.
In this case, operate the unit after first turning on the power of the LCD TV and the AVC
System, or unplug the AC cord for 1 to 2 minutes, then replug again.
Power is cut off suddenly
• Is the sleep timer set?
• The internal temperature of the unit has increased. Remove any objects blocking the vent
or clean as necessary.
No CATV reception (or no reception above CH13)
• Is the AIR/CABLE option set correctly? Please set the AIR/CABLE option to CABLE.
• CATV is connected improperly or not connected; please check all the CATV connections.
• The cable TV service is interrupted; please contact your cable operator.
Picture is cut off/with sidebar screen
• Is the image positioned correctly?
• Are screen mode adjustments such as picture size set correctly?
ViewSonic
N3251w
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Cusomer Support
For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.
Country/
Region
T=Telephone
F=Fax
Web Site
Email
T= (800) 688 6688
F= (909) 468 1202
Canada
T= (866) 463 4775
ViewSonic
N3251w
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
VIEWSONIC® LCD TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its
sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or
refurbished parts or components.
How long the warranty is effective:
ViewSonic LCD TVs are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from
the date of the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed
on the product for an extended period of time.
4. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support at 800-888-8583. You will
need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied
warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states
do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so
the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or
your local ViewSonic dealer.
Warranty_LCDTV
1 of 1
4.3: ViewSonic LCD TV Warranty Rev. 1a
Release Date: 03-31-05
ViewSonic
N3251w
32
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ViewSonic
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Targus Webcam AWE04EU User Manual
Teledyne Respiratory Product MX300 I User Manual
Toshiba Printer e STUDIO500P User Manual
Toshiba Projection Television TDP MT200 User Manual
Trango Broadband Digital Camera PTZ 900 User Manual
Tricity Bendix Cooktop SI 221 User Manual
Ultra Products Battery Charger ULT31790 User Manual
Victorinox Kitchen Utensil VMS0702506 09 User Manual
Viking Computer Hardware 366D User Manual
Viking Cooktop VDSC User Manual