Color Television
36AX61
Owner’s Manual
®
© 2001 TOSHIBA CORPORATION
All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
A polarized alternating current line plug — having one blade wider
than the other. This plug will fit into the power outlet only one way. If
you are unable to insert the plug into the outlet, try reversing the plug.
A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product
and cart combination to overturn.
Un enchufe de línea de corriente alterna polarizado — posee una
cuchilla más ancha que la otra. Este enchufe entrará en la toma de la
red de una sola forma. Si no puede inertar el enchufe en la toma de la
red, trate de invertirlo.
La combinación de un producto y
un carrito deberá moverse con
cuidado. Las paradas repentinas,
la fuerza excesiva, y las superficies
desiguales pondrían hacer que
volcase la combinación del carrito
y del producto.
Alternate Warnings — A three-wire grounding-type plug — a plug
having a third (grounding) pin. This plug will only fit into grounding-
type power outlet.
Advertencias alternativas — Enchufe de tippo puesta a tierra de tres
conductores — enchufe que posee un tercer terminal (de puesta a
tierra). Este enchufe solamente encajará en una toma de la red de tipo
puesta a tierra.
USE / UTILIZACIÓN
Overloading — Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity, since this can result in
fire or electric shock.
Water and Moisture — Do not use the TV set near water — for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
Sobrecarga — No sobrecargue las tomas de la red, los cables
prolongadores, ni los adaptadores para múltiples tomas, ya que esto
supondría el riesgo de incendios o de descargas eléctricas.
Agua y humedad — No utilice el televisor cerca del agua — por
ejemplo, cerca de una bañera, un lavabo, un fregadero, una lavadora, en
un sótano húmedo, cerca de una piscina, ni lugares por el estilo.
During lightning storms, or when the TV set will be left unattended
and unused for a long period of time, unplug the power cord from the
wall outlet and disconnect the antenna or cable system. This will
prevent damage to the TV set due to lightning and power-line surges.
Ventilation — The slots and openings in the cabinet and in the back or
bottom are provided for necessary ventilation. Never block or cover
these slots and openings to ensure reliable operation of the TV set and
to protect it from overheating.
Durante tormentas eléctricas, o cuando no vaya a utilizar el televisor
durante mucho tiempo, desenchufe el cable de alimentación de la toma
de la red y desconecte la antena o el sistema de cablevisión. Esto evitará
que se dañe el televisor debido a rayos y a sobretensiones repentinas en
la red.
Ventilación — Las ranuras y aberturas de la caja y de la parte posterior
o de la base son para proporcionar la ventilación necesaria. Para
asegurar la operación fiable del televisor para protegerlo contra el
recalentamiento. No bloquee ni cubra nunca estas ranuras y aberturas.
a. Never cover the slots and openings with a cloth or other materials.
a. No cubra nunca las ranuras ni las aberturas con paños ni otros
materiales.
b. Never block the slots and openings by placing the TV set on a bed,
sofa, rug or other similar surface.
Object and Liquid Entry — Never push objects of any kind into the
TV set through the cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV set.
Entrada de objetos y líquidos — No introduzca nunca objetos de
ningún tipo en este televisor a través de las aberturas, ya que podrían
tocar puntos de tensión peligrosa o cortocircuitar piezas, lo que podría
resultar en incendio o descarga eléctrica. No vierta nunca liquidos de
ningún tipo sobre este televisor.
b. No bloquee nunca las ranuras ni las aberturas colocando el televisor
sobre una cama, un sofá, una alfombra, ni demás superficies similares.
c. Never place the TV set in a confined space such as a bookcase, built-
in cabinet, or any other place of poor ventilation.
c. No coloque nunca el televisor en un espacio cubierto, como una
librería o un estante empotrados, nien un lugar de mala ventilación.
Cleaning — Unplug the TV set from the wall outlet before cleaning or
polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the TV set.
Heat — Do not place the TV set near or over a radiator or heat
register, or where it is exposed to direct sunlight.
Limpieza — Desenchufe el televisor de la toma de la red antes de
limpiarlo. No utilice limpiadores líquidos ni aerosoles. Para limpiar el
exterior del televisor, utilice un paño ligeramente humedecido en agua.
Calor — No coloque el televisor cerca ni sobre un radiador ni un
registro de calor, ni expuesto a la luz solar directa.
Power-Cord Protection — Do not allow anything to rest on or roll
over the power cord, and do not place the TV set where the power cord
is subject to wear or abuse.
Attachments — Never add accessories that have not been specifically
designed for the TV set. Never remodel the TV set by yourself as this
can result in a fire hazard or electric shock.
Protección del cable de alimentación — No coloque ni pase sobre el
cable de alimentación, ni coloque el telivisor donde su cable de
alimentación pueda sufir cualquier tipo de daños.
Aditamentos — No utilice aditamentos no recomendados por el
fabricante del televisor, ya que podrían suponer un peligro. No
remodele nunca el televisor usted mismo, ya que esto podría causar el
riesgo de incendios o descargas eléctricas.
Accessories — Do not place the TV set on an unstable cart, stand,
tripod, bracket, or table. The TV set may fall, causing serious injury to
a child or adult, and serious damage to the TV set. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the TV set, and should use a mounting accessory recom-
mended by the manufacturer.
If a snapping or popping sound from a TV set is heard continuously or
frequently while the TV set is operated, unplug the TV set and consult
your dealer or service technician. It is normal for some TV sets to make
occasional snapping or popping sounds, particularly when being turned
on or off.
Accesorios — No coloque el televisor sobre un carrito, una base, un
trípode, un soporte ni una mesea inestable. El televisor podría caerse,
causando serios daños a niños o adultos, o al propio televisor. Utilice
solamente el carrito, la base, el trípode, el soporte, o la mesa que
recomiende el fabricante, o que se venda con el televisor, y utilice un
accesorio de montaje recomendado por el fabricante.
Si se oye un sonido seco de un televisor continuo o frecuente mientras
el televisor esté funcionando, desenchúfelo y consulte a su proveedor o
a un técnico de servicio. Es normal que algunos televisores produzcan
sonidos secos, particularmente cuando conecte o desconecte su
alimentación.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE / SERVICIO DE REPARACIÓN
When the TV set reaches the end of its useful life, improper disposal
could result in a picture tube implosion. Ask a qualified service
technician to dispose of the TV set.
Damage Requiring Service — Unplug the TV set from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
Cuando el televisor llegue al final de su vida útil, si se deshace de él de
forma inapropiada, el tubo de imagen puede explotar. Cuando desee
deshacerse de un televisor, solicite este servicio a un técnico de
reparación especializado.
Daños que requieren el servicio de reparación — En los casos
siguientes, desenchufe el televisor de la toma de la red y solicite los
servicios de personal de reparación especializado:
a. When the power cord or plug is damaged or frayed.
a. Cuando se haya dañado el cable de alimentación o el enchufe.
b. When liquid has been spilled into the TV set.
ANTENNA / ANTENA
Outdoor Antenna Grounding — If an outdoor antenna is installed,
follow the precautions below.
b. Cuando se haya vertido líquido dentro del televisor.
c. When the TV set has been exposed to rain or water.
c. Cuando el televisor haya estado expuesto a la lluvia o al agua.
An outdoor antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where
it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
d. When the TV set has been subject to excessive shock by being
dropped, or the cabinet has been damaged.
d. Cuando el televisor haya estado expuesto a golpes excesivos o haya
caído, o su caja se haya dañado.
Be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code in the USA and Section 54 of the
Canadian Electrical Code in Canada provides information with respect
to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
e. When the TV set does not operate normally even though you follow
the operating instructions. Adjust only those controls that are
specified in the operating instructions. Improper adjustment of
other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV set to normal
operation.
When the TV set exhibits a distinct change in performance. This
indicates a need for service.
Puesta a tierra de la antena exterior — Cuando instale una antena
exterior, tenga en cuenta las precauciones siguientes.
e. Cuando el televisor no funcione normalmente incluso al seguir las
instrucciones de operación. Ajuste solamente los controles indicados
en las instrucciones de operación, ya que un ajuste inadecuado de
otros controles podría resultar en daños y a menudo requerirán un
trabajo difícil por un técnico cualificado para devolver el televisor a
su funcionamiento normal.
Un sistema de antena esterior no deberá colocarse cerca de líneas de alta
tensión ni otros circuitos de iluminación o alimentación, ni donde
pueda entrar en contacto con tales líneas o circuitos.
CUANDO INSTALE UN SISTEMA DE ANTENA EXTERIOR,
TENGA EXTREMADO CUIDADO PARA EVITAR QUE ENTRE
EN CONTACTO CON TALES LÍNEAS DE ALIMENTACIÓN O
CIRCUITOS, YA QUE TAL CONTACTO PODRÍA RESULTAR
INVARIABLEMENTE FATAL.
Cuando el funcionamiento del televisor haya cambiado
notablemente — esto indica la necesidad del servicio de reparación.
Servicing — Do not attempt to service the TV set yourself. To open or
remove the covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Cerciórese de que el sistema de antena esté puesto a tierra a fin de que
proporcione cierta protección contra sobretensiones y cargas estáticas.
La Sección 810 del Código Eléctrico Nacional (NEC) de EE.UU. y la
Sección 54 del Código Eléctrico Canadiense ofrecen informacón con
respecto a la puesta a tierra adecuada de una unidad de descarga de
antena, el tamaño de los conductores de puesta a tierra, la ubicación de
la unidad de descarga de la antena, la conexión de los electrodos de
puesta a tierra, y los requisitos de tales electrodos.
Reparación — No intente nunca reparar el televisor por sí mismo. La
apertura o extracción de cubiertas podría exponerle a tensiones
peligrosas u otros peligros. En caso de avería solicite los servicios de
personal de reparación cualificado.
Replacement Parts — When replacement parts are required, be sure
the service technician certifies in writing that he has used replacement
parts specified by the manufacturer that have the same characteristics as
the original parts. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Reemplazo de piezas — Cuando sea necesario reemplazar piezas,
cerciórese de que el técnico de reparación utilice las piezas de reemplazo
especificadas por el fabricante u otras que posean las mismas
características que las originales. Las substituciones no autorizadas
podrían resultar en incendios, descargas eléctricas, u otros peligros.
Safety Check — Upon completion of any service or repairs to the TV
set, ask the service technician to perform routine safety checks (as
specified by the manufacturer) to determine that the TV set is in safe
operating condition, and to so certify.
Comprobación de seguridad — Al finalizar cualquier reparación de
este televisor, solicite al técnico de reparación que realice las
comprobaciones de sguridad (especificadas por el fabricante) para
determinar y certificar si el producto se encuentra en las condiciones de
operación apropiadas.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to Toshiba ..............................................................................................................................7
Exploring your new TV............................................................................................................................... 7
Selecting a location for the TV .................................................................................................................... 7
Notice of possible TV stand instability ................................................................................................ 7
Connecting your TV ...............................................................................................................................8
Note regarding picture quality ............................................................................................................. 8
Connecting a VCR...................................................................................................................................... 8
Connecting a cable converter box ................................................................................................................ 9
Connecting a cable converter box and VCR ................................................................................................ 9
Connecting a DVD player or satellite receiver and a VCR......................................................................... 10
Connecting a DVD player with ColorStream™ (component video) and a VCR....................................... 11
Connecting two VCRs .............................................................................................................................. 11
Connecting a camcorder ........................................................................................................................... 12
Connecting an audio amplifier .................................................................................................................. 12
Using the remote control .................................................................................................................. 13
Preparing the remote control for use.......................................................................................................... 13
Installing the remote control batteries ....................................................................................................... 13
Remote control functional key chart ......................................................................................................... 14
Programming the remote control for use with your audio/video devices .................................................... 16
Device code setup ............................................................................................................................... 16
Searching and sampling the code of a device (991) .............................................................................. 16
Verifying the device code (990) ........................................................................................................... 17
Using the Volume Lock feature (993) .................................................................................................. 17
Operational feature Reset (980)........................................................................................................... 17
Device code table ...................................................................................................................................... 18
Learning about the remote control ............................................................................................................ 22
Setting up your TV .............................................................................................................................. 23
Changing the on-screen display language .................................................................................................. 23
Selecting the antenna input ....................................................................................................................... 23
Selecting the signal source ......................................................................................................................... 24
Watching video input ................................................................................................................................ 24
Adding channels to the TV’s memory ....................................................................................................... 24
Programming channels automatically .................................................................................................. 24
Adding and erasing channels manually ................................................................................................ 25
Changing channels .................................................................................................................................... 25
Using the TV’s features...................................................................................................................... 26
Adjusting the channel settings ................................................................................................................... 26
Switching between two channels ......................................................................................................... 26
Programming your favorite channels ................................................................................................... 26
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the V-Chip menu ............................................................................................................................ 27
Selecting a PIN code ........................................................................................................................... 27
Changing your PIN code .................................................................................................................... 28
Blocking programs by ratings .............................................................................................................. 29
Ratings definitions (MPAA, Youth TV, TV) ........................................................................................ 29
Unblocking programs temporarily....................................................................................................... 31
Blocking unrated movies and programs ............................................................................................... 31
Blocking channels ............................................................................................................................... 32
Locking video inputs ................................................................................................................................. 33
Channel labels ........................................................................................................................................... 34
Video labels............................................................................................................................................... 35
Watching picture-in-picture (PIP) ............................................................................................................. 36
Switching the main and small pictures ................................................................................................ 36
Changing the location of the PIP window ........................................................................................... 37
Freezing the PIP display ...................................................................................................................... 37
Watching multi-window PIP ..................................................................................................................... 37
Adjusting the picture ................................................................................................................................. 38
Adjusting the picture quality ............................................................................................................... 38
Selecting the color temperature ........................................................................................................... 38
Adjusting the picture preference .......................................................................................................... 39
Displaying on-screen information ............................................................................................................. 39
Setting the sleep timer ............................................................................................................................... 39
Auto power off .......................................................................................................................................... 39
Using the closed caption feature ................................................................................................................ 40
Adjusting the sound .................................................................................................................................. 41
Muting the sound ............................................................................................................................... 41
Selecting stereo/SAP broadcasts ........................................................................................................... 41
Adjusting the sound quality................................................................................................................. 42
Using the surround sound feature ....................................................................................................... 42
Selecting variable audio OUT ............................................................................................................. 43
Turning off the built-in speakers ......................................................................................................... 43
Using the sub-bass system (SBS) ......................................................................................................... 44
Viewing the demonstration (DEMO) mode.............................................................................................. 44
Understanding the last mode memory feature ........................................................................................... 44
Appendix............................................................................................................................................... 45
Troubleshooting ........................................................................................................................................ 45
Cleaning and care...................................................................................................................................... 46
Specifications ............................................................................................................................................ 46
Limited United States warranty ................................................................................................................. 47
Attention Canadian customers ............................................................................................................ 47
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manual is to guide you through setting up
and operating your Toshiba TV as quickly as possible. Please make sure
you have received the following items: TV, remote control, batteries,
manual, registration card, and extended service plan literature. If you
did not receive all of the items or if any of the items are damaged or
broken, please contact your Toshiba dealer. In addition, you may need
to purchase other audio or video cables to connect your equipment.
See “Connecting your TV” on page 8 for more information.
Please read all safety and operating instructions carefully before you
begin.
Exploring your new TV
You can operate your TV using the buttons on the front panel or the
remote control. The back panel provides all the terminal connections
you will need to connect other equipment to your TV.
TV/Video
36AX61
Volume
Channel
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
VIDEO L/MONO
AUDIO
R
VIDEO-3 IN
POWER
Video 3
Remote Sensor
Menu
Power Indicator (Red)
Caution:
The plug has one prong wider than the other
ANT (75Ω)
and will fit only one way into a standard
electrical outlet (120 volt AC, 60 Hz). If the
plug does not fit into the outlet, try turning it
around. If the
ANT-1
OUT
ANT-2
IN
OUT
DVD IN
COLOR
S-VIDEO
STREAM
INPUT
wide prong
plug still
Y
VIDEO
VIDEO
does not fit,
the outlet is
probably non-
standard and
must be
Pb
L/MONO
L/MONO
L
AUDIO
R
AUDIO
R
AUDIO
R
Pr
A
N
T
(
7
5
Ω
)
A
N
T
-
1
OUT
A
N
T
-
2
IN
OUT
D
V
D
I
N
S-VIDEO
VIDEO
COLOR
STREAM
INPUT
VIDEO 2
VIDEO 1
Y
VIDEO
MONO
L
/
L
Pb
L/MONO
AUDIO
A
UDIO
Pr
AUDIO
R
R
R
VIDEO
1
replaced by a qualified electrician. Do not
tamper with the plug or try to force it
into a non-standard outlet.
Selecting a location for the TV
• Place the TV on the floor or on the recommended TV stand (see
“Notice of Possible TV Stand Instability” at right).
NOTICE OF POSSIBLE
TV STAND INSTABILITY
• Place the in a location where light does not directly hit the screen.
WARNING: RISK OF
SERIOUS PERSONAL
• Place the TV far enough from the walls to allow proper ventila-
tion. Inadequate ventilation may cause overheating, which may
damage the TV.
INJURY OR DEATH!
Use your TV with the Toshiba TV
stand recommended below only!
The model number and serial number are on the back of your TV.
Record these numbers in the spaces below. Refer to these numbers
whenever you communicate with your Toshiba dealer about this TV.
Use with other
TV Model TV Stand
stands may result
36AX61
ST3641
in instability,
causing possible injury or death.
36AX61
Model number: ________________________
Serial number: ________________________
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV
If you have not connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section.
NOTE REGARDING
PICTURE QUALITY
Note: Cables are not supplied.
• A coaxial cable is the standard cable that comes in from your
When connecting video equipment,
such as a VCR or DVD player:
antenna or cable converter box. Coaxial cables use “F” connectors.
• For GOOD picture quality: Use
regular video cables.
• Audio and video cables are usually color coded according to use:
yellow for video; red and white for audio. The red audio cable is
for the stereo right channel; the white audio cable is for the stereo
(or mono) left channel. If you look at the rear panel of the TV,
you will see that the terminals are color coded in the same manner
as the cables.
• For BETTER picture quality: If your
equipment has S-video connections,
use S-video cables instead of regular
video cables.
• For BEST picture quality: If your
equipment has component video
connections, (ColorStream is
Toshiba’s brand), use component
video cables instead of regular or
S-video cables. Component video
cables come in sets of three.
• S-video cables provide better picture performance than standard
video cables. S-video cables can be used only with S-video
compatible components.
• ColorStreamTM (component video) cables come in sets of three.
A ColorStream (component video) connection will provide the
best picture performance.
Note: Do not connect a regular video
cable and an S-Video cable to VIDEO-1
(or VIDEO-2) at the same time. Doing
so will distort the picture.
S-Video
Cable
ANTENNA
Coaxial Cable
ColorStream
Cable
AUDIO
Cable
Caution:
Do not plug in the TV power cord until
you have finished connecting all of your
equipment.
VIDEO
Cable
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
From Cable or Antenna
Caution:
TV
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
ANT (75Ω)
If you have an S-VHS VCR, use the S-video
connections and omit the video cable.
ANT-1
OUT
ANT-2
IN
OUT
DVD IN
COLOR
S-VIDEO
Do not connect a regular video cable and an
S-video cable to Video-1 (or Video-2) at the
same time.
STREAM
INPUT
Y
VIDEO
VIDEO
Pb
L/MONO
L/MONO
L
AUDIO
R
AUDIO
R
AUDIO
R
Pr
VIDEO 2
VIDEO 1
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a cable converter box
Note:
This connection allows you to watch basic and premium cable
channels. To use the TV features (such as PIP swap, Channel y z,
channel block, favorite channels, or channel labels ), select ANT-1. To
view premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
When you use a converter box with your TV,
the remote control may not operate certain
features, such as PIP swap, channel y z,
channel block, favorite channels, or channel
labels.
You will need:
• two coaxial cables
From Cable
ANT (75Ω)
IN
OUT
DVD IN
Cable
Converter
Box
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to Video1 (see “Watching video input” on page 24). Tune the VCR to
channel 3 or 4 (the same channel as the converter box output switch).
Use the cable converter box to change channels. Set the PIP source to
TV mode (see page 36).
You will need:
• three coaxial cables
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
• one cable splitter
From Cable
TV
ANT (75Ω)
OUT
OUT
Cable
Signal
Splitter
IN
Note:
ANT-1
OUT
ANT-2
When you use a converter box with your
TV, the remote control may not operate
certain features, such as PIP swap,
channel y z, channel block, favorite
channels, or channel labels.
IN
OUT
DVD IN
COLOR
S-VIDEO
STREAM
INPUT
Y
VIDEO
VIDEO
Pb
L/MONO
L/MONO
L
AUDIO
R
AUDIO
R
AUDIO
R
Pr
If you have a mono VCR, connect
L/Mono to VCR Audio OUT using only
one audio cable.
VIDEO 2
VIDEO 1
IN
Cable
Converter Box
OUT
Stereo VCR
If you have an S-VHS VCR, use an
S-video cable instead of a regular video
cable.
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
Do not connect a regular video cable
and an S-video cable to Video-1 (or
Video-2) at the same time.
CH 3
CH 4
OUT
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the DVD player/satellite receiver and
TV, as well as record one TV channel while watching another channel.
Note: If your DVD player has component video connections, follow
the connection instructions under “Connecting a DVD player with
ColorStream™ (component video) and a VCR” on page 11.
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two single audio cables
for a mono VCR)
• two regular video cables
• one S-video cable
To Satellite
DVD / Satellite Receiver
Note:
You can use a regular video cable instead of
an S-video cable between the TV and DVD
player/satellite receiver, but the picture quality
will decrease.
The illustration at left shows one S-video cable
and one pair of audio cables connected to
Video-1 on the TV. Make sure you do not
connect a regular video cable and an S-video
cable to Video-1 (or Video-2) at the same
time. Doing so will distort the picture.
ANT (75Ω)
IN
OUT
DVD IN
Stereo VCR
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Player with ColorStream (component video)
Connecting a DVD player with
ColorStream™ (component video) and
a VCR
This connection allows you to watch DVD, VCR, or
TV programs, and record DVD or TV programs
(when authorized). You can record from one source
while watching a program from another source.
TV
ANT (75Ω)
Your TV has ColorStream (component video) connec-
tions. Connecting your TV to a component video
compatible DVD player (such as a Toshiba DVD
player with ColorStream™) can greatly enhance
picture quality and performance.
IN
OUT
DVD IN
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two
single audio cables for a mono VCR)
• two regular video cables
Stereo VCR
• one set of ColorStream (component) video cables
Note:
For the best picture performance, use ColorStream/
component video cables between the TV and DVD
player. To record from the DVD player, the DVD player
and TV must select VIDEO 1.
Connecting two VCRs
This connection allows you to record from one VCR to another VCR
while watching a video program. You also will be able to record from
one TV channel while watching another channel.
Caution:
The unauthorized recording of
television programs, videotapes,
DVDs, and other materials may
infringe upon the provisions of
copyright laws.
You will need:
• one coaxial cable
• two pairs of audio cables (two single audio cables for mono VCRs)
• two video cables
Stereo VCR [Playback]
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
Note:
CH 3
CH 4
OUT
If you have S-VHS VCRs, use S-video cables
instead of regular video cables.
TV
Do not connect a regular video cable and an
S-video cable to Video-1 (or Video-2) at the
same time.
ANT (75Ω)
ANT-1
OUT
ANT-2
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
IN
OUT
DVD IN
COLOR
S-VIDEO
STREAM
INPUT
Y
VIDEO
VIDEO
Pb
L/MONO
AUDIO
R
L/MONO
L
AUDIO
R
AUDIO
R
Pr
VIDEO 2
VIDEO 1
Stereo VCR
[Recording]
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a camcorder
This connection allows you to watch videos recorded on a camcorder.
Note:
If your camcorder has an S-video connection,
an S-video cable will provide better picture
performance than a regular video cable.
You will need:
• one pair of audio cables
• one video cable
Do not connect a regular video cable and an
S-video cable to Video-1 (or Video-2) at the
same time.
Camcorder
Camcorder
TV Back
ANT (75Ω)
Or
IN
OUT
DVD IN
TV Front
Connecting an audio amplifier
This connection allows you to use an audio amplifier to adjust the
audio level. This connection also allows you to use external speakers.
Note:
The volume of both the TV and the amplifier
must be set above 0, or you will not hear any
sound.
To control the audio, turn on the TV and the stereo amplifier.
You will need:
• one pair of audio cables
To Cable, Cable Box,
or Antenna
Audio Amplifier
TV
ANT (75Ω)
IN
OUT
DVD IN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control
Preparing the remote control for use
Note:
Your TV’s remote control may or may not
operate your audio/video devices.
Your Toshiba remote control has one dedicated TV mode and five
universal modes: VCR, Cable/SAT, DVD, Audio1, and Audio2. The
target and default devices being programmed for each mode are as
follows:
Refer to the owner’s manuals supplied with
the devices to see which features are
available. In addition, the original controllers
may have features not available on this remote
control. If you would like to continue to use
these features, you may want to use the
original remote control.
Target device/Mode mapping
Mode
TV
CABLE/SAT Universal Cable, Satellite
Device
Toshiba TV
VCR
Universal VCR, DVD, LD, Cassette
DVD
Universal DVD, VCR, LD, Cassette
AUDIO1
AUDIO2
Universal Audio: Amp., Tuner, Misc.Audio, CD/MD
Universal Audio: CD/MD, Amp., Tuner, Misc.Audio
Default device codes
Mode
TV
Default device
Toshiba TV
CABLE/SAT Toshiba Satellite receiver
VCR
Toshiba VCR
DVD
AUDIO1
AUDIO2
Toshiba DVD
Pioneer Audio receiver
Pioneer LD
Repeatedly press MODE to cycle among the modes. If you own
different brands of audio/video devices, you first have to program
your remote control (see “Programming the remote control for use
with audio/video devices” on page 16).
Installing the remote control batteries
Caution:
• Dispose of batteries in a designated
disposal area. Do not throw batteries into
a fire.
To install the batteries:
1. Slide the battery cover off the back of the remote control.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• Battery life expectancy is about one year
with normal use. If you do not intend to use
the remote control for a long time, remove
the batteries.
2. Install two “AA” size alkaline batteries. Match the + and - signs
on the batteries to the signs on the battery compartment.
3. Slide the battery cover back on the remote control until the lock
snaps.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control functional key chart
Toshiba TV
(TV)
Cable
Satellite
VCR
DVD/LD
Receiver
(AUDIO) (AUDIO)
CD/MD
Cassete
(VCR)
Key Label
LIGHT
(CBL/SAT) (CBL/SAT)
Illuminates the remote
Sleep timer ---
SLEEP
---
---
---
---
Power
---
---
POWER
1/MOVIE
2/SPORTS
3/NEWS
Power
Power
Power
Digit 1
Digit 2
Digit 3
Digit 4
Digit 5
Digit 6
Power
Power
Power
Power
Digit 1
Digit 2
Digit 3
Digit 1
Digit 2
Digit 3
Digit 4
Digit 5
Digit 6
Digit 1
Digit 2
Digit 3
Digit 4
Digit 5
Digit 6
Digit 1
Digit 2
Digit 3
Digit 4
Digit 5
Digit 6
AV input 1 Digit 1
AV input 2 Digit 2
AV input 3 Digit 3
AV input 4 Digit 4
Digit 1
Digit 2
Digit 3
Digit 4
Digit 5
Digit 6
4/SERVICES Digit 4
5/LIST
Digit 5
Digit 6
CD
Digit 5
Digit 6
6
Tuner
MODE
Device mode selection for the remote control
This button is not available for this TV model or any other device connected to this TV.
PIC SIZE
7
Digit 7
Digit 8
Digit 9
---
Digit 7
Digit 8
Digit 9
Menu
100
Digit 7
Digit 8
Digit 9
Digit 7
Digit 8
Digit 9
Digit 7
Digit 8
Digit 9
Menu
100
Phono
Cassette
Aux
Digit 7
Digit 8
Digit 9
---
Digit 7
Digit 8
Digit 9
---
8
9
ACTION
100/–
0
Action, Menu Menu
---
100
100
100
100
100
100
Digit 0
---
Digit 0
Digit 0
Digit 0
Digit 0
Digit 0
---
Digit 0
---
Digit 0
---
ENT
CH Enter CH Enter CH Enter ---
GUIDE/SETUP ---
Guide
Guide
Program
DVD setup Program
TV
Program
---
INFO/TITLE TV preview
TV INFO
TV TITLE=
TV
TV
Top menu
FAVORITE/
SUBTITLE
Favorite CH ---
Favorite CH ---
Alphasort ---
Select Enter
Subtitle
---
---
---
---
---
---
---
---
---
ALPHASORT/ ---
AUDIO
---
Audio
Enter
MENU/
ENTER
Menu open/ Select
Enter
yz
Menu select Menu select Menu select Menu select Menu select ---
---
---
---
---
x •/FAV x • Menu select/ Menu select Menu select Menu select Menu select ---
FAV x •
VOL yz
Volume
Volume
Volume
Volume
Volume
Volume
Volume
---
up/down* up/down* up/down* up/down* up/down* up/down* up/down*
EXIT/
Exit
Exit
Exit
Exit
DVD clear Exit/Clear Exit/Clear Exit/Clear
DVD CLEAR
CH yz
Channel
up/down
Channel
up/down
Channel
up/down
Channel
up/down
---
Channel
up/down
---
---
INPUT
TV/Video
select
TV
TV VCR input
TV Input
TV
TV
MUTE
Sound mute* Sound mute* Sound mute* Sound mute* Sound mute* Sound mute* Sound mute* ---
RECALL
On-screen
display
On-screen
display
On-screen
display
On-screen
display
On-screen ---
display
---
---
CH RTN/
DVD RTN
Previous
channel
Previous
channel
Previous
channel
Previous
channel
DVD
return
---
---
---
SLOW/
DIR
•
---
---
---
---
---
---
Forward
---
Forward
Reverse
---
---
---
---
---
---
x
SKIP/
SEARCH
•
x
---
---
---
---
---
---
---
---
Forward
Reverse
CH forward Forward
CH reverse Reverse
Forward
Reverse
REW
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
Rewind
Pause
Play
Rewind
Pause
Play
Rewind
Pause
Play
Rewind
Pause
Play
Rewind
Pause
Play
PAUSE/STEP VCR
PLAY
FF
VCR
VCR
VCR
F. Forward F. Forward F. Forward F. Forward F. Forward
TV/VCR
Bypass A/B TV/SAT
TV/VCR
---
---
---
---
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC AM/FM ---
---
---
---
Disc shift
AM/FM
Disc shift
Deck side
A/B switch
STOP
VCR
VCR
VCR
VCR
VCR
Stop
Stop
---
Stop
Stop
Stop
REC
VCR
Record
Record
Record
Record
TV TV
PIP CH yz
PIP channel
up/down
TV
TV
TV
TV
TV
PIP
PIP on/off
Strobe
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
MULTI
STILL
PIP Still
SWAP
PIP Swap
PIP Locate
PIP Source
LOCATE
SOURCE
Notes:
• “---” will send nothing.
• “
TV” will jump to TV.
” will jump to last active VCR or DVD. Active VCR/DVD is defined as the mode that remains for a minimum of 5
• “VCR
seconds, or if a key is pressed in that mode.
The VOLUME and MUTE will jump to “TV” by default. When the volume is unlocked, all the devices will have their own volume.
The AUDIO1/2 (Receiver, CD) modes will have their own volume even if Volume Lock is on TV, CABLE/SAT, VCR, or DVD. See
“Using the Volume Lock feature” on page 17.
*
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the remote control for use with
your audio/video devices
Device code setup
1. Refer to the Device code table on pages 18–21 to find the code
POWER
for your device.
CHANNEL
NUMBERS
If more than one code is listed, try each one separately until you
find the one that works.
MODE
2. Press MODE until the mode indicator of the device (CABLE/
SAT, VCR, DVD, AUDIO1, AUDIO2) lights up.
3. While holding down RECALL, press the CHANNEL
NUMBERS to enter the four-digit code for your device.
Release the buttons.
y
If a valid code is entered, the mode indicator will blink twice.
If an invalid code is entered, there will be one long blink.
4. Point the remote control at the device and press POWER to test
the code.
RECALL
If the device turns on, you have entered the right code.
If the device does not respond to the remote control, you may
have entered an invalid code. Repeat steps 3 and 4 using another
code.
Note:
5. To control the TV, press MODE until TV mode lights up.
• Every time you replace the batteries, you
must reprogram the remote control.
• Some newer VCRs are capable of working
on either of two remote codes. These VCRs
have a switch labeled “VCR1/VCR2.”
Searching and sampling the code of a device (991)
If you do not know the device code for a particular device, you can
cycle the remote control through the available codes for that device
and sample functions to find the code that operates the device. The
keys available to be sampled, provided they are applicable to that
mode, are 0, 1, 2, 3, POWER, VOL y, CH y, PLAY, and STOP.
Invalid keys will be ignored while in program mode.
If your VCR has this kind of switch and
does not respond to any of the codes for
your VCR brand, set the switch to the other
position (VCR1 or VCR2) and reprogram
the remote control.
To cycle through each available device code and sample its functions:
1. Press MODE to select the mode you want to set up.
2. While holding down RECALL, press 9, 9, 1 in sequence. The
remote control will enter program mode.
3. Point the remote control at the device, and then press POWER
(or other function buttons that are available to be sampled).
4. If the device responds to the remote control:
Press RECALL to store the device code.
The mode indicator will blink two times, and the remote
control will exit the program mode.
If the device does not respond to the remote control:
Press y, and then press POWER.
Repeat this step until the device responds to the remote
control, and then press RECALL.
Note: When a search cycle is done, the mode indicator will blink three times.
The remote control will begin to cycle through the available codes again.
If no key is pressed within 10 seconds while programming, the remote
control will exit the program mode and return to the previous code.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Verifying the device code (990)
Use this feature to verify the codes for your other devices. The
number of blinks after pressing the 1, 2, 3, and 4 buttons is the
4-digit code set up for that mode.
For example, to verify the VCR device code:
1. Press MODE to select the VCR mode.
2. While holding down RECALL, press 9, 9, 0 in sequence.
3. Press 1 ➝ 0 blinks.
CHANNEL
NUMBERS
MODE
4. Press 2 ➝ 3 blinks.
5. Press 3 ➝ 8 blinks.
6. Press 4 ➝ 5 blinks.
This verifies that the device code of the VCR is “0385.”
Using the Volume Lock feature (993)
For the TV, CABLE/SAT, VCR, and DVD modes, the volume
controls (VOL yz and MUTE) can be programmed (locked) to the
selected device mode. This feature does not apply to the AUDIO1/2
modes.
VOL y z
RECALL
For example, to lock the volume controls to the CABLE/SAT mode:
1. Press MODE to select the CABLE/SAT mode.
2. While holding down RECALL, press 9, 9, 3 in sequence.
3. Press VOL y. The Mode indicator will blink two times (locked).
The following table describes the Volume Lock implementation.
Volume
Locked to:
TV
CBL/SAT
TV
VCR
TV
DVD AUD1 AUD2
TV AUD1 AUD2
TV (default) TV
CBL/SAT CBL/SAT CBL/SAT CBL/SAT CBL/SAT AUD1 AUD2
VCR
VCR
VCR
VCR
VCR
AUD1 AUD2
AUD1 AUD2
AUD1 AUD1
AUD2 AUD2
DVD
AUD1
AUD2
DVD
AUD1
AUD2
DVD
AUD1
AUD2
DVD
AUD1
AUD2
DVD
AUD1
AUD2
To reset the volume controls to the original device code:
1. While holding down RECALL, press 9, 9, 3 in sequence.
2. Press VOL z. The mode indicator will blink four times
(unlocked).
Operational feature Reset (980)
This feature clears all setup features not related to “Device code set
up” and resets the Volume Lock to “TV.”
To reset the features:
While holding down RECALL, press 9, 8, 0 in sequence.
The mode indicator will blink two times, and then pause and
blink two more times.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Device code table
Cable box setup codes
Satellite Receiver setup codes
Brand name
Code number
Brand name
AlphaStar
Chaparral
Curtis Mathes
Echostar
Code number
0791
0072, 0235
0080
0288, 0299, 0794,
1024
0794
SL Marx
Samsung
Scientific Atlanta
0059
ABC
0020, 0022, 0026,
0027, 0030, 0032,
0033, 0036
0172, 0334
0918
0059, 0163
0027, 0036, 0496,
0896
0529
0034, 0059
0030
Allegro
Seam
Signal
Americast
Antronix
Archer
0041, 0226
0041, 0172, 0226,
0816
0286
0075
0033
0918
0075
0041
0041
0172
0172, 0334
0044, 0050
0059
0038
0656
0021
0816
Expressvu
Signature
Sprucer
StarSight
Starcom
Stargate
General Instrument 0380, 0646, 0888
HTS
0040
0794
0838
0257
0441, 0561
0022, 0034
0034, 0059, 0789,
0816
0034
0020
0329
0082
0277
0240
0059
0020
0437
0031, 0032
0019
0034
0041, 0172, 0226
0026
0041, 0075, 0172,
0210, 0226
0046, 0082, 0277
0019, 0073, 0544,
0918
BBT
Belcor
Hitachi
Homecable
Hughes Network
Systems
IQ
IQ Prism
JVC
Jerrold
Bell & Howell
Bell South
Cable Star
Cabletenna
Cableview
Century
Citizen
Colour Voice
Comtronics
Contec
0768
0229
0229
0794
0380, 0646
0288
0080
0741, 0743
0288, 0743
0888
Starquest
Sylvania
TFC
TV86
Tandy
TeleCaption
Teleview
Texscan
Timeless
Tocom
Toshiba
Tusa
Unika
Legend
Macom
Magnavox
Memorex
Next Level
Panasonic
Philips
Digi
Eastern
0720
Emerson
Everquest
Focus
GC Electronics
Garrard
0741, 0743
0380, 0646
0162, 0411, 0585,
0874
0888
0071
0229
0658
0888
0080, 0101, 0768,
0809, 1071, 1072,
1073
0071, 0093, 0257,
0741, 0743
0080, 0875
0034, 0059
0419
0075, 0226
0172
Primestar
RCA
United Artists
Universal
Radio Shack
Realistic
STS
Sony
Star Choice
Toshiba
Gemini
0034, 0089, 0816
Viewstar
Zenith
General Instrument 0030, 0295, 0495,
0829
GoldStar
Goodmind
Hamlin
0059, 0163
0816
0028, 0039, 0053,
0278, 0292
0030
Zentek
0419
Hitachi
Hytex
Jasco
Uniden
Zenith
0026
0034, 0172, 0334
0022, 0030, 0031,
0033, 0034, 0043,
0295, 0495, 0829
0459
Jerrold
Linsay
Magnavox
Memorex
Movie Time
NSC
Novaplex
Oak
Optimus
Panasonic
Panther
Paragon
Philips
0046
0019
0082, 0175
0082, 0089, 0175
0637
0026, 0038
0040
0019, 0040, 0126
0656
0019
0044, 0046, 0050,
0172
Pioneer
0042, 0163, 0552,
0896
Popular Mechanics
Prelude
0419
0789
Pulsar
0019
Quasar
0019
RCA
0040
Radio Shack
0034, 0334, 0816,
0902
Realistic
Recoton
Regal
Regency
Rembrandt
Runco
0226
0419
0039, 0278, 0292
0021
0030, 0089
0019
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Device code table
VCR setup codes
Brand name
Admiral
Adventura
Aiko
Aiwa
Akai
Code number
0067, 0228
0019
Kenwood
0057, 0060, 0086,
0403
0054, 0056
0056
0019, 0227
0091
0054
0062, 0080, 0259
0259
0019, 0259
0297
0019, 0054, 0058,
0100, 0129, 0168
0259
0054, 0100
0056
0054, 0181, 0473
0019, 0054, 0056,
0058, 0065, 0066,
0067, 0123, 0181,
0228, 0259, 0326,
0473, 1056, 1181,
1281
Radix
Randex
Realistic
0056
0056
Kodak
LXI
Lloyd's
Logik
MEI
MGA
MGN Technology
MTC
Magnasonic
Magnavox
0019, 0054, 0056,
0065, 0066, 0067,
0081, 0085, 0123
0633, 0635
0053, 0272
0058
0061
0064, 0070, 0072,
0259
0058, 0067
0019, 0060, 0086,
0228, 0290, 0498
0065, 0066, 0123,
0259
0062, 0064, 0140,
0203, 0229, 0231
0019, 0054, 0056,
0061, 0065, 0066,
0073, 0076, 0085,
0123, 0124
0064
0297
0019, 0056, 0326
0060, 0072, 0080,
0125
0297
0054
0259
0056
0259
0123
0021, 0140, 0203,
0228, 0314, 0380,
0498
0091, 0297
0056
0054
0039
0100
0297
ReplayTV
Ricoh
Runco
STS
America Action
American High
Asha
Audiovox
Beaumark
Samsung
Sanky
Sansui
Bell & Howell
Broksonic
Magnin
Marantz
Marta
Matsushita
Memorex
Sanyo
Scott
Sears
CCE
Calix
Canon
Capehart
Carver
Cineral
Citizen
Colt
0056, 0297
0091
Semp
Minolta
Mitsubishi
0061, 0124
0062, 0067, 0080,
0086
0054, 0067
0019, 0091
0077
0057, 0059, 0060,
0086, 0123
0056
0053, 0272
0259
Sharp
0067, 0081
0091
0070, 0259
0091
0019, 0051, 0052,
0053, 0054, 0272,
1051
Craig
0056, 0066, 0091,
0259, 0290
0054, 0060, 0079,
0181
0070, 0259
0039, 0064, 0297,
0580
0039
0061
0019
0056
Shintom
Shogun
Singer
Sony
Curtis Mathes
Motorola
Multitech
NAD
Cybernex
Daewoo
NEC
Sunpak
Sylvania
0272
Daytron
Denon
Dynatech
Electrohome
Electrophonic
Emerex
Nikko
Nikon
Noblex
Olympus
Optimus
0019, 0054, 0062,
0100, 0129
0019
0055, 0227, 0259
0060
0019, 0060
0054, 0181
0019, 0054, 0056
0019
Symphonic
TMK
Tatung
Teac
Technics
Teknika
Thomas
Tivo
0054
0056
0051
0056, 0067, 0077,
0123, 0181, 0451,
0473, 1067, 1081,
1181, 1281
0081
0021, 0203, 0228,
0314, 0498
0054, 0096, 0181,
0244, 0473, 0635,
1081, 1181, 1281
0054, 0056, 0057,
0059, 0061, 0073,
0259
Emerson
0019, 0021, 0055,
0056, 0062, 0080,
0087, 0107, 0140,
0203, 0227, 0228,
0231, 0297, 0313,
0314, 0380, 0498,
0580
0066, 0073, 0085,
0123
0052, 0054
0019
0054, 0067, 0079,
0221, 0259
0019
0451, 0545, 0662
0056, 0057
0019, 0027
0066
Optonica
Orion
0637
Toshiba
0062, 0064, 0076,
0085, 0229, 0231,
0385
0056, 0259
0259
Panasonic
Penney
Fisher
Totevision
Unitech
Vector
Vector Research
Video Concepts
Videosonic
Wards
Fuji
Funai
GE
0064
0057, 0059
0059, 0064, 0080
0259
0019, 0054, 0061,
0066, 0067, 0079,
0081, 0091, 0100,
0168, 0231, 0259
Pentax
Philco
Philips
0061, 0124
0054, 0228, 0498
0054, 0081, 0100,
0129, 0637, 1100,
1200
Garrard
Go Video
GoldStar
Gradiente
HI-Q
Pilot
0056
Pioneer
Portland
Profitronic
Proscan
Protec
0077, 0086
0039
0259
0079, 0221
0091
0058, 0070
0065
White Westinghouse 0228, 0297
Harley Davidson
Harman/Kardon
Harwood
Headquarter
Hitachi
0019
XR-1000
Yamaha
Zenith
0019, 0054, 0091
0057
0019, 0052, 0053,
0058, 0228, 0498,
0656
0057, 0100
0087, 0091
0065
0019, 0060, 0061,
0124
Pulsar
Quarter
Quartz
Quasar
Hughes Network
Systems
JVC
0065
0061
0027, 0060, 0086,
0403
0060
0056, 0297
0091
0054, 0096, 0181,
0473, 1181
0054, 0061, 0067,
0079, 0096, 0124,
0125, 0168, 0221,
0259
RCA
Jensen
KEC
KLH
Radio Shack
0019, 1056
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Device code table
DVD setup codes
CD Player setup codes
Brand name
Aiwa
Denon
Code number
Brand name
ADC
Adcom
Aiwa
Akai
Audio Alchemy
Audio-Technica
BSR
Burmester
California Audio Labs 0048, 0322
Code number
Sanyo
Scott
Sears
Sharp
Sherwood
0106, 0198
0174, 0183, 0324
0324
0056, 0199, 0880
0199, 0215, 0445,
1086
0019, 0204, 0509,
0623, 0624
0164
0439
0193, 0199, 0412,
0439
0048, 0322
0038, 0318
0213
0660
0037
0509, 0653
0541
0601
0577, 0642
0553
0522
0174, 0253
0143, 0176
0175
0213
0189
GE
Harman/Kardon
JVC
Kenwood
Magnavox
Marantz
Mitsubishi
Onkyo
Optimus
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sharp
Sherwood
Sony
Sony
0213, 0264
0439
0558
0540
Soundesign
Tascam
Teac
0522, 0646
0590
0509, 0651
0522, 0558
0544, 0590, 0651
0541
0541
0592
0649
0652
Carrera
Carver
0213
0176, 0198, 0318,
0456
0264
0019
0022, 0892
0174, 0183, 0324,
0488
0107, 0193, 0198,
0361
Technics
Toshiba
Vector Research
Victor
Wards
Yamaha
Yorx
DAK
DKK
Denon
Emerson
0091
0072, 0176
0055, 0189, 0206
0480
Fisher
0552
GE
0028
Technics
Theta Digital
Toshiba
Yamaha
Zenith
0509
0590
0522
0509, 0564
0522, 0610
Garrard
0264, 0299, 0412,
0439
0051, 0183, 0324
0176, 0192, 0445
0051, 0174
0091
Genexxa
Harman/Kardon
Hitachi
JVC
Kenwood
0047, 0056, 0209,
0645, 0700, 0845
0306
Laser Disc setup codes
Brand name
Aiwa
Code number
0222
Kodak
Krell
0176
Kyocera
LXI
Linn
Luxman
MCS
MTC
0037
0324
0176
0112
0048
0439
Carver
Denon
Disco Vision
Funai
Harman/Kardon
Hitachi
0083, 0213, 0342
0078, 0191
0042
0222
0213
0042
Magnavox
Marantz
McIntosh
Mission
NAD
NEC
NSM
Nikko
Onkyo
Optimus
0176, 0324
0048, 0176, 0199
0306
0176
0038, 0318
0253
Magnavox
Marantz
Mitsubishi
NAD
Optimus
Panasonic
Philips
Pioneer
Quasar
Realistic
Samsung
Sega
0213, 0236
0083, 0213
0078
0078
0078
0223
0176
0083, 0213
0042, 0078
0223
0222
0342
0042
0212, 0220
0223
0213
0236
0183, 0189, 0193
0120, 0887
0019, 0051, 0056,
0106, 0164, 0198,
0213, 0215, 0299,
0324, 0361, 0439,
0445, 0456, 0487,
1082
Sony
Technics
Theta Digital
Yamaha
Panasonic
0048, 0322, 0386,
0771
Parasound
Philips
Pioneer
0213, 0439
0176, 0306, 0645
0051, 0263, 0324,
0487, 1082
0176
Proton
QED
Quasar
RCA
0176
0048
0028, 0072, 0174,
0198, 0324, 0783
0174, 0183, 0198,
0199, 0439
0176, 0439
0176
Realistic
Rotel
SAE
STS
0037
Sansui
0176, 0221, 0324
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Device code table
Amplifier setup codes
Misc. Audio setup codes
Brand name
Aiwa
Carver
Curtis Mathes
Denon
GE
Code number
Brand name
Aiwa
Fisher
Harman/Kardon
JBL
JVC
Code number
0029, 0178, 0423
0071
0496
0496
0092
0478, 0539
0395
Pioneer
0033, 0099, 0169,
0550, 0649, 1042
1273
0425
0288
0319
0179
0097
0911
0350
Proscan
Quasar
RCA
0058
0073, 0365, 0379,
0549, 0550, 1173,
1273
Harman/Kardon
JVC
Jerrold
Nikko
Realistic
Sansui
0182, 0200, 0214
0208, 0212, 0365,
1108
0238, 0820
0182, 0341
0205
0081, 0510, 0521
0177, 0187, 0493,
1061, 1077, 1177,
1277
0689
0332, 0333, 1071,
1332
0182, 0482
0058, 0227, 0328,
0537, 1327, 1328,
1537
Linn
0288
0288
0288
0319, 0414
0327
0288, 0911
0032, 0319
0414
0239, 0708
0097
0327
0372
0350
0032, 0097
0373
Paramount Pictures 0336
Magnavox
Marantz
Optimus
Panasonic
Philips
Pioneer
Realistic
Sony
Soundesign
Technics
Toshiba
Victor
Wards
Yamaha
RCA
0075
SSI
0336
Sanyo
Scott
Sharp
Sherwood
Sony
Schneider
Scientific Atlanta
Sony
Soundesign
Starcom
Yorx
0395
0479
0029, 0178, 0595
0395
0478
0395
Soundesign
Sunfire
Receiver setup codes
Brand name
ADC
Code number
0550
Teac
Technics
Adcom
0635
Aiwa
0140, 0177, 0208,
0424, 1108, 1424
0095, 0243
0550
0027, 0061, 0208,
0379, 1108, 1208
0214
Cassette Player setup codes
Brand name
Aiwa
Akai
Carver
Thorens
Victor
Wards
1208
0093
0033, 0073, 0099,
0177, 0208
0195, 0205, 1195
0214
Akai
Capetronic
Carver
Code number
0048, 0216, 0219
0302
0048
0095
Yamaha
Yorx
Zenith
Casio
Denon
Fisher
Clarinette
Curtis Mathes
Denon
0214
0099
0876
0093
Garrard
Harman/Kardon
JVC
Kenwood
Magnavox
Marantz
Mitsubishi
Onkyo
0327, 0458
0048, 0201
0263, 0292
0089
0048
0028, 0048
0302
0154, 0155, 0301
0046, 0239, 0356,
0458
0248
0048
0023, 0292, 0790,
1123, 1179
0443
0061, 0238, 0379
0443, 0482
0129, 0208, 0910
0081
Emerson
Fisher
Garrard
Harman/Kardon
Inkel
JBL
0129
Optimus
JVC
0093
Kenwood
0046, 0061, 0096,
0205, 0332, 0333,
1046, 1071, 1332,
1588
Panasonic
Philips
Pioneer
Revox
0046, 0118, 0239
0209
Koss
0443
Sansui
Sherwood
Sony
0028, 0048
0356
0189, 0262, 0310
0327
0248
0360, 0361
0292
LXI
Linn
Lloyd's
MCS
Magnavox
0200
0208
0214
0058, 0365
0147, 0208, 0214,
0410, 0550, 1108,
1208
Teac
Technics
Toshiba
Victor
Wards
Yamaha
0046
0113, 0116
Marantz
0058, 0147, 0208,
1108, 1208
0214
Modulaire
NAD
0339
NEC
0254
Nakamichi
Onkyo
Optimus
0116, 0366
0119, 0154, 0399
0061, 0099, 0196,
0200, 0205, 0238,
0550, 0689, 0757,
0820, 1042
0058, 0328, 0537,
1537
Panasonic
Penney
Philips
0214
0208, 0410, 1108,
1208
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning about the remote control
Only the buttons that are used to operate the TV set are described
here.
POWER turns the TV on or off
SLEEP sets the TV to turn off at a specific time (page 39)
LIGHT The initial press of the LIGHT button causes two actions:
1) enables the illumination mode
2) illuminates the keypad.
Subsequent presses of the LIGHT button cause the Illumination
mode to toggle between enabled and disabled. Any keypress
illuminates the keypad for 5 seconds.
If in programming mode, the keypad will remain lit for 10
seconds.
When disabled, pressing the LIGHT button enables the illumina-
tion mode and lights the keypad.
Channel Numbers (0-9, 100) allow direct access to channels (pages 24, 25)
MODE cycles through the 6 device modes (TV, CABLE/SAT, VCR,
DVD, AUDIO1, AUDIO2).
MENU/ENTER allows access to programming and sets programming
menu information (page 23)
yz x • selects or adjusts programming menus (page 23)
x • (FAVORITE) selects your favorite channels (page 26)
VOL yz adjusts the volume level
EXIT sets programming menu information and exits programming
menus (page 23)
CH yz cycles through programmed channels (page 24)
CH RTN (Channel Return) returns to the last viewed channel (page 26)
RECALL displays on-screen information(page 39)
MUTE mutes the sound (page 41)
AM/FM
DISC
INPUT selects video input source (page 24)
PIP Buttons allow access to PIP functions (page 36)
PIP turns the PIP on and off
PIP CH yz selects the PIP channels
INFO allows access to the Multi-Window function
STILL freezes the PIP display
SOURCE selects the PIP source
LOCATE changes the location of the PIP window
SWAP switches the PIP and main pictures
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
TV Front Panel
After you have installed the batteries and programmed the remote
control, you will need to set some preferences on your TV using the
menu system. You can access the menus using the buttons on your TV
or remote control.
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to save your changes.
Note: The TV front panel does not have an EXIT button.
yzx •
MENU
• When you are finished programming the menus, you can press
EXIT to clear the on-screen display, or wait 15 seconds and the
on-screen display will disappear automatically. Your changes are
automatically saved either way.
Changing the on-screen display language
You can choose from three different languages (English, French, and
Spanish) for the on-screen displays of menus and messages.
To select an on-screen display language:
1. Press MENU .
2. Press x or • until the SET UP menu appears.
3. Press y or z to highlight LANGUAGE.
4. Press x or • to highlight your desired language.
MENU
yzx •
SET UP
CONFIGURE
LANGUAGE:
LANGUE:
[ENGLISH] FRANCAIS ESPANOL
ENGLISH [FRANCAIS] ESPANOL
ANT1/2:
[ANT1] ANT2
[TV] CABLE
ANT1/2:
[ANT1] ANT2
[TV] CABLE
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
TV/CABLE:
PROGRAMME CAN
ADD/EFF:
MORE
[ADD] ERASE
[ADD] EFF
EXIT
[
]
[
]
MOVE
SELECT
[
]
[
]
BOUGER
CHOISIR
Selecting the antenna input
You can connect to one of two different antenna input sources using
the antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU .
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight ANT 1/2.
4. Press x or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
[
]
[
]
MOVE
SELECT
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the signal source
Use the INPUT button on the remote control (or the TV/VIDEO button
on the TV) to monitor or change the signal source connected to your TV.
TV/VIDEO
CHANNEL yz
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
To monitor the signal source:
Press INPUT (or TV/VIDEO) once. The current signal source
displays in green.
To change the signal source:
Repeatedly press INPUT (or TV/VIDEO) to select either VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream, ANT 1, or ANT 2. The selected
signal source displays in green.
yzx •
MENU
VIDEO 1
VIDEO 2
VIDEO 3
ANT 1
ColorStream ANT 2
TO SELECT PUSH TV/VIDEO
CHANNEL
NUMBERS
Watching video input
To view a signal from other devices connected to your TV
(such as a VCR or DVD player):
Repeatedly press INPUT on the remote control (or TV/VIDEO
on the TV) to select either VIDEO 1, VIDEO 2, VIDEO 3, or
ColorStream. (For device connections, see “Connecting your TV”
on page 8).
MENU
yzx •
Adding channels to the TV’s memory
CHANNEL y/z
When you press CHANNEL L/M on the TV or remote control,
EXIT
the TV stops only on the channels stored in the TV’s memory.
INPUT
Note: To tune the TV to a channel not programmed in the TV’s
memory, use the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the TV’s memory. After the channels are stored automati-
cally, you can manually add or erase individual channels (see page 25).
If you use both ANT-1 and ANT-2 terminals, you will need to program
channels for each input source.
To program channels automatically:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight TV/CABLE.
4. Press x or • to highlight TV (if you use an antenna) or CABLE (if
you use cable).
5. Press z to highlight CH PROGRAM.
SET UP
SET UP
LANGUAGE:
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
[ENGLISH] FRANCAIS ESPANOL
ANT1/2:
TV/CABLE:
[ANT1] ANT2
[TV] CABLE
ANT1/2:
TV/CABLE:
[ANT1] ANT2
[TV] CABLE
CH PROGRAM
ADD/ERASE:
MORE
CH PROGRAM
ADD/ERASE:
MORE
[ADD] ERASE
[ADD] ERASE
[
]
[
]
[
]
[
]
MOVE
SELECT
MOVE
SELECT
24
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press x or • to start automatic channel programming (“CH
PROGRAM” displays on-screen). The TV automatically cycles
through every TV or cable channel (depending on which you
selected), and stores all active channels in the TV’s memory.
CHANNEL yz
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
7. When automatic channel programming is complete, the message
“CH Programming Completed” appears.
8. Press CHANNEL L/M to view the programmed channels.
yzx •
MENU
Adding and erasing channels manually
After you have automatically programmed the channels into the TV’s
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV’s memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
CHANNEL
NUMBERS
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight ADD/ERASE.
SET UP
MENU
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
ANT1/2:
TV/CABLE:
[ANT1] ANT2
[TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
MORE
yzx •
[
]
[
]
MOVE
SELECT
CHANNEL y/z
5. Press x or • to highlight ADD or ERASE, whichever function
EXIT
you want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press CHANNEL y/z.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s features
Adjusting the channel settings
Switching between two channels
CHANNEL
NUMBERS
You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Select the first channel you want to view.
MENU
2. Select a second channel using the CHANNEL NUMBERS (0–9
x/• (FAVORITE)
and 100).
3. Press CH RTN (channel return). The previous channel will
yzx •
display.
Every time you press CH RTN, the TV will switch back and forth
between the last two channels you tuned the TV to.
CHANNEL y/z
EXIT
Programming your favorite channels
The Favorite Channel feature allows you to use the
x/• (FAVORITE) buttons on the remote control to cycle through
your favorite channels, skipping over channels you do not normally
watch. You can program a maximum of 12 favorite channels.
CH RTN
(Channel
Return)
Note: You can still use CHANNEL L/M to cycle through all the
channels you previously programmed into the TV’s memory (see
“Adding channels to the TV’s memory” on page 24).
To program your favorite channels:
1. Tune the TV to a channel you want to program as a favorite
channel.
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight FAVORITE CH.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
DEMO:
0 MIN
START [STOP]
[
]
[
]
MOVE
START
5. Press x or • to display the FAVORITE CH menu. SET/CLEAR
will be highlighted.
6. Press x or • to highlight SET.
7. Press z to add the current channel to the list.
8. Press MENU.
SET UP
FAVORITE CH
[SET] CLEAR
2
0
0
5
0
0
6
0
0
11
0
0
[TV: CYAN, CABLE: BLUE]
[
]
[
]
SELECT
SET
9. Repeat steps 1–8 for a maximum of 12 channels, or press EXIT
to close the menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To select your favorite channels:
Note:
Press the x/• (FAVORITE) buttons on the remote control to
cycle through the favorite channels you programmed.
The x/ • (FAVORITE) buttons function as
menu x/ • buttons when a menu is
on-screen.
Note: The Favorite Channel feature will not work unless you
program at least one favorite channel.
To clear a favorite channel:
1. Tune the TV to the channel you want to clear from your favorite
channel list.
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight FAVORITE CH.
CHANNEL
NUMBERS
5. Press x or • to display the FAVORITE CH menu. SET/CLEAR
will be highlighted.
6. Press x or • to highlight CLEAR.
MENU
x/• (FAVORITE)
SET UP
yzx •
FAVORITE CH
SET [CLEAR]
2
0
0
5
0
0
6
0
0
0
0
0
CHANNEL y/z
[TV: CYAN, CABLE: BLUE]
[
]
[
]
SELECT
CLEAR
EXIT
7. Press z to clear the current channel number from the list.
8. Press MENU.
10. Repeat steps 1–8 for other channels you want to clear from your
favorite channel list, or press EXIT to close the menu.
Using the V-Chip menu
You can use the V-Chip feature to block certain programs or channels
to prevent others from viewing them.
Selecting a PIN code
Before you can block programs and channels, you need to select a
personal identification number (PIN) code. The PIN code you select
allows you to access the V-Chip menu and prevents others from
changing the rating and blocking limits you set.
To select your PIN code and access the V-Chip menu:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
SET UP
SET UP
MORE
CHANNEL
NUMBERS
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
_ _ _ _
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
0 MIN
START [STOP]
DEMO:
[
]
SELECT [0–9] END [EXIT]
[
]
MOVE
START
MENU
5. Use the CHANNEL NUMBERS (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the code is entered,
the V-Chip Control menu appears.
yzx •
6. Press y or z to highlight ENABLE BLOCKING.
7. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip. See “Blocking programs by ratings” on
page 29, “Blocking unrated movies or programs” on page 31,
and “Blocking channels” on page 32.
EXIT
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK
OFF
[
]
[
]
MOVE
SELECT
Changing your PIN code
Note:
If you forget your PIN code:
1. Press MENU.
• Follow steps 1–4 under “Changing your PIN
code” at left.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
• Then press RECALL four times within five
seconds.
5. Use the Channel Number buttons (0–9) to enter your existing
PIN code. After the code is entered, the V-Chip Control menu
appears.
This allows you to proceed to the V-Chip
Control menu and reset your PIN code.
6. Press y or z to highlight NEW PIN CODE.
7. Press x or • to display the New PIN Code screen.
SET UP
SET UP
ENABLE BLOCKING
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
[Y] N
PLEASE ENTER NEW PIN CODE
_ _ _ _
VIDEO LOCK
OFF
SELECT [0–9] END [EXIT]
[
]
[
]
MOVE
SELECT
8. Use the CHANNEL NUMBERS (0–9) to enter a new code.
After the new code is entered, the V-Chip Control menu appears.
9. Press EXIT to return to normal TV viewing.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Blocking programs by ratings
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a similar rating system to qualify the content of television
programs. The MPAA, Youth TV, and TV ratings work with the
V-Chip feature to allow you to block access to programs that exceed
the rating limits you set.
Note:
Press RECALL to see the rating of the
program you are viewing.
Ratings definitions
MPAA Ratings
X
For adults only.
NC17
R
Not intended for anyone 17 or under.
Restricted. Under 17 requires an accompanying parent or adult
guardian.
PG13
PG
Parents strongly cautioned. Some material may not be appropriate
for children under 13.
Parental guidance suggested. Some material may not be appropri-
ate for children.
G
General audience. Appropriate for all ages.
Youth TV Ratings
Y7, Y7FV
Directed to older children. Programs rated Y7 are designed for
RECALL
children 7 and above. Programs in which fantasy violence may be
more intense or combative than other programs in this category
are rated Y7FV.
Y
For all children. Programs rated Y are designed to be appropriate
for all children.
TV Ratings
MA
Mature audience only. This program is specifically designed to be
viewed by adults and therefore may be unsuitable for children
under 17.
Language
Sex
Crude or indecent language.
Explicit sexual activity.
Graphic violence.
Violence
14
Parents strongly cautioned. This program contains some material
that many parents would find unsuitable for children under 14
years of age.
Dialog
Intensely suggestive dialog.
Strong, coarse language.
Intense sexual situations.
Intense violence.
Language
Sex
Violence
PG
Parental guidance suggested. This program contains material that
parents may find unsuitable for younger children.
Dialog
Some suggestive dialog.
Infrequent coarse language.
Some sexual situations.
Moderate violence
Language
Sex
Violence
G
General audience. Most parents would find this program suitable
for all ages.
No DLSV
Programs without any Dialog, Language, Sex, or
Violence ratings.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Blocking programs by ratings (cont.)
Not all programs are rated. To block programs
or movies that are unrated, see “Blocking
unrated movies and programs” on page 31.
To block programs by rating:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
5. Use the CHANNEL NUMBERS (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the code is entered,
the V-Chip Control menu appears.
CHANNEL
NUMBERS
6. Press y or z to highlight ENABLE BLOCKING.
7. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
MENU
yzx •
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK
OFF
EXIT
[
]
[
]
MOVE
SELECT
8. Press y or z to highlight SET RATING.
9. Press x or • to display the Set Rating menu.
10. Press y or z to highlight MPAA Rating, Youth TV Rating, or
TV Rating.
11. Press • to select (or x to deselect) the ratings to be blocked.
Blocked ratings are signified with the symbol “x.” Unblocked
ratings are signified with the symbol “✔.” As you block ratings,
all ratings higher than the ones you select are blocked as well.
For example, if you block the MPAA rating R, the higher ratings
NC17 and X will also be blocked.
SET UP
SET UP
MPAA RATING:
TV RATING:
DIALOG:
MA 14 PG
x
G
X
NC17 R PG13 PG
G
x x
LANGUAGE:
SEX:
YOUTH TV RATING:
VIOLENCE:
NO DLSV:
Y
Y7FV Y7
BACK TO V-CHIP MENU
TV RATING
[
]
[
]
[
]
[
]
MOVE
SELECT
MOVE
SELECT
12. When you finish selecting the ratings to be blocked:
• To return to the V-Chip menu, press y or z to highlight
BACK TO V-CHIP MENU, and then press x or •.
• To return to normal TV viewing, press EXIT.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Unblocking programs temporarily
When you try to view a program with a ratings block, a message
appears stating that the program has been blocked because the
program’s rating exceeds the set limits. To temporarily override the
block and view the program, press MUTE and enter your PIN code.
To reset your original ratings blocks, turn the TV off and then on
again.
CHANNEL
NUMBERS
THIS PROGRAM HAS BEEN BLOCKED
TV-PG
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
TO TE_MP_OR_AR_ILY UN-BLOCK
MENU
L
V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
yzx •
SELECT [0–9] END [EXIT]
Blocking unrated movies and programs
Some movies and programs are not rated. You can use the V-Chip to
block unrated movies and programs.
EXIT
MUTE
To block unrated movies and programs:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the PIN code is
entered, the V-Chip Control menu appears.
6. Press y or z to highlight ENABLE BLOCKING.
7. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
8. Press y or z to highlight SET BLOCKING OPTIONS.
9. Press x or • to display the unrated movie/program blocking
menu.
10. Press y or z to highlight BLOCK TV NONE RATING.
11. Press x or • to highlight “Y” to block movies/programs rated
“TV None.” (Note: Highlight “N” to unblock unrated programs.)
12. Press EXIT to return to normal TV viewing.
SET UP
SET UP
Caution:
ENABLE BLOCKING
SET RATING
[Y] N
BLOCK MPAA UNRATED:
[Y] N
[Y] N
BLOCK TV NONE RATING:
BACK TO V-CHIP MENU
Blocking unrated television programs (with a
rating of “TV NONE”) may block emergency
messages.
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
NOTICE: ENABLING THIS OPTION
MAY BLOCK EMERGENCY
MESSAGES
VIDEO LOCK
OFF
[
]
[
]
[
]
[
]
MOVE
SELECT
MOVE
SELECT
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Blocking channels
You can block a maximum of four TV channels and four cable
channels. Blocked channels cannot be viewed regardless of their
ratings. If you try to display a blocked channel, the TV will display the
nearest unblocked channel.
CHANNEL
NUMBERS
To block a channel:
1. Tune the TV to the channel you want to block.
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight V-CHIP CONTROL.
5. Press x or • to display the Enter PIN Code screen.
MENU
yzx •
6. Use the CHANNEL NUMBERS (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
EXIT
7. Press y or z to highlight ENABLE BLOCKING.
8. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
9. Press y or z to highlight BLOCK CHANNEL.
10. Press x or • to display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
11. Press x or • to highlight SET.
12. Press z to add the current channel to the list.
13. Press MENU.
Note:
After programming CHANNEL BLOCK, tune
the TV to a channel that is not blocked before
turning it off.
SET UP
BLOCK CHANNEL
[SET] CLEAR
0
0
0
6
[
]
[
]
SELECT
SET
END [EXIT]
14. Press EXIT.
15. Repeat steps 1–14 to block additional channels.
To unblock all blocked channels:
Note: This will unblock every channel you have blocked. You cannot
unblock individual channels.
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
5. Use the CHANNEL NUMBERS (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press y or z to highlight BLOCK CHANNEL.
7. Press x or • to display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
8. Press x or • to highlight CLEAR.
9. Press z to clear all blocked channels from the list.
10. Press MENU.
CHANNEL
NUMBERS
11. Press EXIT to return to normal TV viewing.
Locking video inputs
You can use the Video Lock feature to block the input sources
MENU
(Video 1, Video 2, Video 3, and ColorStream) and channels 3 and 4.
yzx •
Note: The Video Lock feature is independent of the Enable Blocking
option of V-Chip control.
The Video Lock options are:
Video: Blocks Video 1, Video 2, Video 3, and ColorStream.
EXIT
Video+: Blocks Video 1, Video 2, Video 3, ColorStream, and
channels 3 and 4.
Note:
Off:
Disables the Video Lock feature.
In normal TV viewing, if you cannot access the
input sources (Video 1, Video 2, Video 3, and
ColorStream) or channels 3 and 4, check the
Video Lock setting and highlight OFF if
necessary.
To set up video lock:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
5. Use the CHANNEL NUMBERS (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
6. Press y or z to highlight VIDEO LOCK.
7. Press x or • to select the desired level of video locking (Video,
Video+, or Off).
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK
VIDEO VIDEO+ [OFF]
[
]
[
]
MOVE
SELECT
8. Press EXIT to return to normal TV viewing.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel labels
A channel label displays on the screen above the channel number
every time you turn the TV on, change the channel, or press
RECALL. You can assign labels to a maximum of 32 channels.
You can choose up to four characters for a channel label.
CHANNEL
NUMBERS
To create a channel label:
1. Tune the TV to the channel you want to label.
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight CH LABEL.
MENU
yzx •
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
DEMO:
EXIT
0 MIN
START [STOP]
[
]
[
]
MOVE
START
RECALL
5. Press x or • to display the CH LABEL menu. SET/CLEAR will
be highlighted.
6. Press x or • to highlight SET.
7. Press z to highlight LABEL.
SET UP
SET UP
CH LABEL
SET/CLEAR
CH LABEL
SET/CLEAR
LABEL
[SET] CLEAR
_ _ _ _
[SET] CLEAR
_ _ _ _
LABEL
SET UP MENU
SET UP MENU
[
]
[
]
MOVE
SET [ENT]
SELECT
[
]
[
]
MOVE
SELECT
8. Press x or • repeatedly to scan through the list of available
characters until the desired character appears in the first space.
9. Press MENU.
10. Repeat steps 8 and 9 to enter the rest of the characters.
Note: For a blank space in the label name, you must choose an
empty space from the list of characters; otherwise, a dash will
appear in the space.
11. Repeat steps 1–10 for a maximum of 32 channels.
12. Press EXIT to return to normal TV viewing.
To erase a channel label:
1. Select the channel whose label you want to erase.
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight CH LABEL.
5. Press x or • to display the CH LABEL menu. SET/CLEAR will
be highlighted.
6. Press x or • to highlight CLEAR.
7. Press MENU.
8. Repeat steps 1–7 to erase other channel labels, or press EXIT to
return to normal TV viewing.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Video labels
The Video Label feature allows you to label each input source for your
TV from the following preset list of labels:
–:
Uses the default label name
VCR: Video cassette recorder
DVD: Digital video disc or digital versatile disc
DTV: Digital TV set-top box
SAT: Satellite box
CBL: Cable box
MENU
To set up video labels:
1. Press MENU.
yzx •
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight VIDEO LABEL.
4. Press x or • to display the Video Label screen.
EXIT
5. Press y or z to highlight the input source to be labeled
(VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream).
6. Press x or • to select the desired label for that input source.
SET UP
VIDEO LABEL
VIDEO1
– VCR DVD DTV [SAT] CBL
VIDEO2
VIDEO3
ColorStream
–
–
–
SET UP MENU
[
]
[
]
MOVE
SELECT
7. Repeat steps 1–6 to label the other input sources.
8. When you finish setting up video labels:
• To return to the previous menu, press y or z to highlight
SET UP MENU, and then press x or •.
• To return to normal TV viewing, press EXIT.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching picture-in-picture (PIP)
The picture-in-picture (PIP) feature allows you to watch two pictures
at the same time. The small PIP window can display a signal from a
TV broadcast or an external source, such as a VCR.
CHANNEL y/z
To display a TV broadcast in the PIP window:
1. Tune the TV to the program you want to watch in the main
window.
2. Press PIP to display a small picture (one press displays a PIP
window 1/9 the size of the screen; two presses display a 1/16-size
window).
AM/FM
DISC
PIP
SWAP
LOCATE
SOURCE
STILL
PIP Channel y/z
1/9 1/16
PIP
7
3. Press PIP Channel y/z to change the PIP window channel.
Press Channel y/z to change the main window channel.
To display an external source in the PIP picture:
1. Connect the external equipment through the ANT-1 connection
on the TV (an ANT-2 source will not display as a PIP). For
connection information, see “Connecting your TV” on page 8.
Note:
The PIP window will not open when a
ColorStream (component video) source is
being viewed.
2. Turn on the TV and select the program/source you want to watch
in the main window.
3. Press PIP to display a small picture (one press displays a PIP
window 1/9 the size of the screen; two presses display a 1/16-size
window).
4. Press SOURCE to select the PIP input source (TV, VIDEO 1,
VIDEO 2, or VIDEO 3). The current source will display
on-screen in green.
PIP
TV
VIDEO1
VIDEO2
VIDEO3
TO SELECT PUSH SOURCE
To turn PIP off:
Press PIP one or two times, depending on the size of the small
picture screen you selected.
Switching the main and small pictures
With the TV in PIP mode, repeatedly press SWAP to switch the
main and small pictures back and forth.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the location of the PIP window
With the TV in PIP mode, press LOCATE to change the location of
the PIP window on-screen. Every time you press LOCATE, the PIP
window changes position counter-clockwise.
INFO
CHANNEL y/z
Freezing the PIP display
AM/FM
With the TV in PIP mode, press STILL to freeze the PIP display. The
PIP picture becomes still and is outlined in red on-screen. Press
STILL again to restore the moving picture (outlined in green).
DISC
PIP
SWAP
LOCATE
SOURCE
STILL
PIP Channel y/z
Still
Watching multi-window PIP
Multi-window PIP appears as six small boxes across the bottom of the
screen. The multi-window PIP displays only the channels you
programmed into the TV’s memory (see “Adding channels to the TV’s
memory” on page 24).
Note:
Multi-window PIP displays channels
programmed for the signal source you are
currently viewing (ANT-1 or Cable). See
“Adding channels to the TV’s memory” on
page 24.
Note: The LOCATE, SWAP, PIP CHANNEL yz, SOURCE,
and STILL buttons do not function in multi-window PIP mode.
If V-Chip blocking is enabled when you view
multi-window PIP, the channels exceeding the
rating limits will appear as a black window
with a red “X.”
To view multi-window PIP:
Press INFO.
The TV cycles through all of the programmed channels, showing a
few seconds of each channel’s programming, and then freezes the
image and moves on to the next channel in a continuous cycle. The
channel number appears above each small PIP window.
14
23
27 30
43
56
To turn multi-window PIP off:
Press INFO again or change the channel.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture
TV/VIDEO
Adjusting the picture quality
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, sharpness, color, and tint. Your
picture quality adjustments are stored automatically in the TV’s
memory. You can keep these settings or choose preset options under
the PREFERENCES menu. (See “Selecting the color temperature”
below, and “Adjusting the picture preference” on the next page.)
yzx •
MENU
To adjust the picture quality:
1. Press MENU.
2. Press x or • to highlight the PICTURE menu.
3. Press y or z until the quality you want to adjust is highlighted.
PICTURE
–
CONTRAST 50
BRIGHTNESS 50
SHARPNESS 50
+
COLOR
TINT
50
0
RESET
[
]
[
]
MOVE
ADJUST
MENU
4. Press x or • to adjust the level.
Selection
Pressing
yzx •
Contrast
Brightness
Sharpness
Color
Lower
Darker
Softer
Paler
Higher
Lighter
Sharper
Deeper
Greenish
EXIT
Tint
Reddish
Selecting the color temperature
Note:
To reset the picture adjustments to the factory
settings, select RESET in the PICTURE menu.
You can change the quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm.
Mode
Picture Quality
Cool
Medium
Warm
Blueish
Neutral
Reddish
To select the color temperature:
1. Press MENU.
2. Press x or • to highlight the PREFERENCES menu.
3. Press y or z to highlight COLOR TEMPERATURE.
4. Press x or • to highlight the mode you prefer.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture preference
You can select the picture type from four picture modes—Sports,
Standard, Movie, and Memory, as described in the following table:
TV/VIDEO
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
Mode
Picture Quality
Sports
Bright and dynamic picture (factory-set)
Standard picture quality (factory-set)
Standard
Movie
Memory
Movie-like picture setting (factory-set)
Your personal preferences (set by you; see
“Adjusting the picture quality” on page 38.)
yzx •
MENU
To select your picture preference:
1. Press MENU.
SLEEP
2. Press x or • to highlight the Preferences (“PREFER”) menu.
3. Press y or z to highlight PICTURE PREFERENCE.
4. Press x or • to highlight the mode you prefer.
Displaying on-screen information
Press RECALL to display the following information on-screen:
• Antenna mode (when in TV mode)
• Channel number or video mode
MENU
• Channel label (if set)
• Audio status (stereo or SAP)
yzx •
• Rating of current program (if rated)
EXIT
Setting the sleep timer
The sleep timer turns the TV off automatically.
RECALL
INPUT
To set the sleep timer:
1. Press SLEEP.
2. Press • to increase and x to decrease the amount of time until the
TV turns off (in 10-minute increments to a maximum of 180).
3. Press EXIT to exit the menu and return to normal TV viewing.
To cancel the sleep timer:
Set the sleep timer to 0 (zero) minutes, or turn the TV off and
then on again.
Auto power off
The TV turns itself off automatically after approximately 15 minutes if
it is tuned to a vacant channel or a station that stops broadcasting for
the day.
Note: The auto power off feature does not work in VIDEO mode.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the closed caption feature
The Closed Caption feature has two options:
• Captions—An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in your local TV listing as “CC”).
• Text—An on-screen display of information not related to the
program, such as weather or stock data (if available in your
viewing area).
To view captions or text:
1. Tune the TV to the desired program or video.
2. Press MENU.
MENU
yzx •
3. Press x or • to highlight the CLOSED CAPTION (“CC”)
menu.
4. Press y or z to highlight CC.
EXIT
CLOSED CAPTI0N
CC:
C1 C2 C3 C4 T1
T2 T3 T4 [OFF]
[
]
[
]
MOVE
SELECT
Note:
A closed caption signal may not display in the
following situations:
5. Press x or • to select the desired Closed Caption mode, as
follows:
•
•
•
When a videotape has been dubbed
When the signal reception is weak
• To view captions, select C1, C2, C3, or C4 (C1 displays
translation of the primary language in your area). Note: If the
program or video you selected is not closed-captioned, no
captions will display on the screen.
When the signal reception is non-
standard
The top of the mountain is covered
with snow all the year round.
• To view text, select T1, T2, T3, or T4. Note: If text is not
available in your viewing area, a black rectangle may appear on
your screen. If this occurs, turn the Closed Caption feature off.
WORLD WEATHER
Temps
F
Current
Weather
Clear
C
LONDON
MOSCOW
PARIS
51
11
14
12
19
18
57
Cloudy
Clear
53
66
ROME
TOKYO
Cloudy
Rain
65
• To turn the Closed Caption feature off, highlight OFF in the
Closed Caption menu.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn the sound off. While the sound is off,
the screen displays the word “MUTE” in the lower /right corner. To
restore the sound, press MUTE or VOLUME y/z.
When you press MUTE, the Closed Caption feature is automatically
activated. To deactivate captions and restore normal sound, press
MUTE again. This feature works only when the Closed Caption mode
is set to OFF. See “Using the closed captioned feature” on page 40 for
more information about closed caption settings.
MENU
Selecting stereo/SAP broadcasts
yzx •
The multi-channel TV sound (MTS) feature provides high-fidelity
stereo sound. MTS also can transmit a second audio program (SAP)
containing a second language or other audio information. Note: The
MTS feature is not available in VIDEO mode.
VOLUME yz
EXIT
RECALL
In general, you can leave your TV in stereo mode because the TV
automatically outputs either stereo or monaural (“mono”) sound,
depending on the broadcast type.
MUTE
When the TV receives a stereo or SAP broadcast, the word “STEREO”
or “SAP” displays on the screen every time you turn the TV on,
change the channel, or press RECALL.
To listen to stereo sound:
1. Press MENU.
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight MTS.
4. Press x or • to highlight STR (stereo).
Note: If the stereo sound is noisy, select MONO to reduce the
noise.
AUDIO
MTS:
[STR] SAP MONO
50
50
0
BASS
TREBLE
BALANCE
SURROUND: [ON] OFF
AUDIO OUT: [FIX] VARIABLE
MORE
[
]
[
]
MOVE
SELECT
To listen to a second audio program (SAP):
1. Press MENU.
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight MTS.
4. Press x or • to highlight SAP. The TV speakers will output only
the second audio program.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound quality
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
To adjust the sound quality:
1. Press MENU.
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight the quality you want to adjust.
4. Press x or • to adjust the level:
yzx •
MENU
• x makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
• • makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
AUDIO
MTS:
[STR] SAP MONO
–
+
BASS
TREBLE
BALANCE
50
50
0
SURROUND: [ON] OFF
AUDIO OUT: [FIX] VARIABLE
MORE
[
]
[
]
MOVE
ADJUST
MENU
Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV speakers.
This feature uses stereo signals from a TV broadcast or video input.
yzx •
To turn the surround sound feature on:
1. Press MENU.
EXIT
2. Press x or • to highlight the AUDIO menu.
3. If you have not already done so, select STEREO mode (press y or
z to highlight MTS, and then press x or • to highlight STR).
4. Press y or z to highlight SURROUND.
Note:
5. Press x or • to highlight ON.
To reset the audio adjustments to the factory
settings, select RESET in the PICTURE menu
(see page 38).
AUDIO
MTS:
[STR] SAP MONO
BASS
TREBLE
BALANCE
50
50
0
SURROUND: [ON] OFF
AUDIO OUT: [FIX] VARIABLE
MORE
[
]
[
]
MOVE
SELECT
To turn the surround sound feature off:
Highlight OFF in step 5 above. Note: In general, you can leave the
surround sound feature on because it automatically outputs surround
stereo or monaural sound, depending on the broadcast or video type.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting variable audio OUT
If you connect external audio equipment (such as a stereo
audio amplifier or surround sound system) to the TV’s Audio OUT
jack, you can use the AUDIO OUT feature to select either variable or
fixed audio output.
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
– If you set AUDIO OUT to VARIABLE, you can use the volume
controls on either the TV or the audio equipment to adjust the
sound level coming through the audio equipment.
yzx •
MENU
– If you set AUDIO OUT to FIX, you must use the volume controls
on the audio equipment to adjust the sound level coming through
the audio equipment (the TV’s volume setting will have no effect).
Note: Fixed audio output provides a cleaner signal than variable audio
output.
See page 12 for details on connecting an audio amplifier to the TV’s
Audio OUT jack.
To select variable audio output:
1. Press MENU.
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight AUDIO OUT.
4. Press x or • to highlight VARIABLE.
MENU
AUDIO
yzx •
MTS:
[STR] SAP MONO
BASS
TREBLE
BALANCE
50
50
0
SURROUND: [ON] OFF
AUDIO OUT: FIX [VARIABLE]
MORE
EXIT
[
]
[
]
MOVE
SELECT
To select fixed audio output:
1. Highlight FIX in step 4 above.
Turning off the built-in speakers
Use this feature to turn off the TV’s built-in speakers when you
connect external speakers to your TV (see “Connecting an audio
amplifier” on page 12).
To turn off the built-in speakers:
1. Press MENU.
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight SPEAKERS.
4. Press x or • to highlight OFF.
AUDIO
MORE
SPEAKERS: ON [OFF]
SBS:
SBS LEVEL:
[ON] OFF
50
[
]
[
]
MOVE
SELECT
To turn on the built-in speakers:
1. Highlight ON in step 4 above.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the sub-bass system (SBS)
The sub-base system (SBS) allows you to enhance bass performance,
even when the volume is low.
POWER
To turn the sub-bass system on [or off]:
1. Press MENU.
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight SBS.
4. Press x or • to highlight ON [or OFF].
MENU
AUDIO
MORE
SPEAKERS:
[ON] OFF
yzx •
SBS:
SBS LEVEL:
[ON] OFF
50
[
]
[
]
MOVE
SELECT
EXIT
To adjust the sub-bass system:
1. Turn the sub-bass system on, as instructed above.
2. Press MENU.
RECALL
3. Press x or • to highlight the AUDIO menu.
4. Press y or z to highlight SBS LEVEL.
5. Press x or • to adjust the SBS level.
AUDIO
MORE
SPEAKERS:
SBS:
[ON] OFF
[ON] OFF
–
+
SBS LEVEL: 50
[
]
[
]
MOVE
ADJUST
Viewing the demonstration (DEMO) mode
The demonstration (DEMO) mode is an option available on the
SET UP menu that will demonstrate several features of your TV.
To start the demonstration mode:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight DEMO.
4. Press x or • to highlight START.
4. Press MENU to start the demo.
To stop the demonstration mode:
Press RECALL, EXIT, or POWER.
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns the TV on automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Before calling a service technician, please check the following table for possible causes of the problem and
some solutions.
Problem
Solution
TV will not turn on
• Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries or
press the POWER button on the TV.
No picture, no sound
No sound, picture OK
• Check the antenna/cable connections.
• The sound may be muted. Press MUTE or VOLUME y z.
• The station may have broadcast difficulties. Try another channel.
Poor sound, picture OK
Poor picture, sound OK
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• If you are using a VCR, make sure the TV/VCR button is set
correctly.
Cannot receive above channel 13
Unable to select a certain channel
• Make sure TV/CABLE is set to TV mode.
• The channel may be locked out with the channel lock feature, or
erased with the add/erase feature.
Multiple images
• The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
Poor color or no color
• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• If you change the direction of the TV while it is turned on, the
picture could suffer from color shading. If so, turn the TV off and
allow it to cool down for several hours before turning it on again.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly.
The remote control does not operate
• Check that the TV/CABLE/VCR switch is properly set.
• There may be an obstruction between the remote control and the
remote control sensor.
• The remote control batteries may be dead. Replace the batteries.
The V-Chip PIN code does not work
• Change or reset your PIN code.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
WARNING: TV sets use high voltage. Do not remove the cabinet back.
Refer all servicing to qualified service technicians.
To clean the TV screen and cabinet:
1. Unplug the power cord to avoid possible shock hazard.
2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water; liquid spilling into the cabinet can damage
the TV.
3. Wipe off excess moisture with a clean dry cloth.
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution:
Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the cabinet’s finish.
Specifications
Television system
Channel coverage
NTSC standard
VHF:
UHF:
2 through 13
14 through 69
Cable TV: Mid band (A-8 through A-1, A through 1)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
Power source
120 AC, 60 Hz
Power consumption
Audio power
104 W
5 W + 5 W
Speaker type
2-3/8 x 4-3/4 inches (60 x 120 mm)
Video/Audio terminals
ColorStream™ (component video) INPUT
Y: 1V (p-p), 75 ohm
C
R
(PR): 0.7 V (p-p), 75 ohm
(PB): 0.7 V (p-p), 75 ohm
CB
S-VIDEO INPUT
Y-INPUT: 1 V (p-p), 75 ohm, negative sync.
C-INPUT: 0.286 V (p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)
VIDEO/AUDIO OUTPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)
Dimensions
Width: 38-3/16 inches (970 mm)
Height: 30-1/16 inches (764 mm)
Depth: 25-1/4 inches (641 mm)
Weight
154 lbs (69.9 kg)
Supplied accessories
Optional TV stand
Remote control with two size “AA” batteries
ST-3641
Design and specifications are subject to change without notice.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States warranty
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii Inc. (“THI”) make the following limited warranties. These limited warranties extend
to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
Limited One (1) Year Warranty
Owner’s Manual and Demographic Card
TACP and THI warrant this product and its parts against defects in
materials or workmanship for a period of one (1) year after the date of
original retail purchase. During this period, TACP and THI will repair or
replace a defective part, at their option, with a new or refurbished part,
without charge to you. TACP/THI Authorized Service Center personnel
will come to your home when warranty service is required. Depending on
the type of repair required, either the service will be performed in your
home or the set will be taken to the TACP/THI authorized service center
for repair and returned to your home at no cost to you.
You should read this owner’s manual thoroughly before operating this
product. You should complete and mail the enclosed Demographic card
within ten days after you, or the person who has given you this product as a
gift, purchased this product. This is one way to enable TACP/THI to
provide you with better customer service and improved products. Failure to
return the Demographic card will not affect your rights under this warranty.
Your Responsibility
The above warranties are subject to the following conditions;
(1) You must retain your bill of sale or provide other proof of purchase.
Limited Two (2) Year Warranty of Picture Tube
(2) All warranty servicing of this product must be made by an Authorized
TACP/THI Service Center.
TACP and THI further warrant the picture tube in this product against
defects in materials or workmanship for a period of two (2) years after the
date of original retail purchase. During this period, TACP and THI will
repair or replace a defective picture tube at their option, with a new or
refurbished picture tube, without charge to you, except that, if a defective
picture tube is replaced after one (1) year from the date of the original
retail purchase, you pay labor charges involved in the replacement.
(3) These warranties are effective only if the product is purchased and
operated in the U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems are
not covered by this warranty. Reception problems caused by
inadequate antenna systems are your responsibility.
Rental Units
(5) Warranties extend only to defects in materials or workmanship as
limited above, and do not extend to any product or parts that have
been lost or discarded by you, or to damage to products or parts
caused by misuse or accident, damage caused by Acts of God such as
lightning or fluctuations in electric power, improper installation,
improper maintenance, or use in violation of instructions furnished by
us, or to units which have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
The warranty for rental units begins with the first rental or thirty (30) days
from the date of shipment to the rental firm, whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited ninety (90) day
warranty for all parts, labor and picture tube.
How to Obtain Warranty Service
If after following all of the operating instructions in this manual and checking the “Troubleshooting” section, you find that service is needed:
(1) To find the nearest Toshiba Authorized Service Center, visit
Solutions,” or call us toll-free at 1-800-631-3811.
(2) Present your bill of sale or other proof of purchase to the Authorized Service
Center. “Authorized TACP/THI service center personnel will come to your
home when warranty service is required. Depending on the type of repair
required, either the service will be performed in your home or the TV set will
be taken to the TACP/THI authorized service center for repair and returned to
your home at no cost to you.”
In Hawaii, contact Toshiba Hawaii, Inc., Service, 327
Kamakee Street, Honolulu, HI 96814, (808) 591-9281.
For additional information, visit our web site:
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the
duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is
exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or
replacement of any parts. In no event shall TACP or THI be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The
time within which action must be commenced to enforce any obligation of TACP or THI arising under this warranty or under any state or law of the
United States or any state thereof, is hereby limited to 90 days from the date you discover, or should have discovered, the defect. This limitation does not
apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow limitation on
how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages; therefore, the
above provisions may not apply to you.
ATTENTION CANADIAN CONSUMERS
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and
forward this completed form with a copy of the bill of sale to TOSHIBA OF CANADA to “Register and Validate” their
warranty.
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.
REV. 03/01
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba America
Consumer Products, Inc.
Head Office
National Service Division
82 Totowa Road
Wayne, NJ 07470
1420B Toshiba Drive
Lebanon, TN 37087
Head Office
Toshiba Hawaii, Inc.
327 Kamakee Street
Honolulu, HI 96814
Toshiba of Canada, Ltd.
Head Office
Service Centers
191 McNabb Street
Markham, Ontario L3R 8H2
Canada
Toronto
191 McNabb Street
Markham, Ontario L3R 8H2
Canada
Tel: (905) 470-5400
Montreal
1643 North Service Road
Trans-Canada Highway
Dorval, Quebec H9P 1J1
Canada
Tel: (514) 856-4100
Vancouver
22171 Fraserwood Way
Richmond, British Columbia V6W 1J5
Tel: (604) 303-2500
Manufactured by:
Toshiba America
Consumer Products, Inc.
PRINTED IN USA
(01-04)B
23565247
Download from Www.Somanuals.com. All Manuals Search And Download.
|