Toshiba CRT Television 27AF44 User Manual

27AF44  
3N11501A[E] COVER  
1
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
Installation, Care, and Service  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
Installation  
Follow these recommendations and precautions and heed all  
warnings when installing your TV:  
4) Follow all instructions.  
16) Never modify this equipment. Changes or modifications  
may void: a) the warranty, and b) the users authority to  
operate this equipment under the rules of the Federal  
Communications Commission.  
5) Do not use this apparatus near  
water.  
17)  
DANGER: RISK OF SERIOUS PERSONAL  
INJURY, DEATH, OR EQUIPMENT  
DAMAGE! Never place the TV on  
6) Clean only with a dry cloth.  
an unstable cart, stand, or table. The TV  
may fall, causing serious personal injury,  
death, or serious damage to the TV.  
7) Do not block any ventilation  
openings. Install in accordance with  
the manufacturers instructions.  
18) Never place or store the TV in direct  
sunlight; hot, humid areas; areas  
subject to excessive dust or vibration;  
or locations with temperatures at or  
below 41°F (5°C).  
8) Do not install near any heat  
sources such as radiators,  
heat registers, stoves, or other  
apparatus (including amplifiers)  
that produce heat.  
9) Do not defeat the safety purpose of the polarized or  
grounding type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has  
two blades and a third grounding  
19) Always place the TV on the floor  
or a sturdy, level, stable surface that  
can support the weight of the unit.  
Wide plug  
prong. The wide blade or the third  
prong are provided for your safety.  
If the provided plug does not fit into  
your outlet, consult an electrician  
for replacement of the obsolete outlet.  
20) Never place items such as vases,  
aquariums, or candles on top of the TV.  
10) Protect the power cord from being  
walked on or pinched, particularly at  
plugs, convenience receptacles, and  
the point where it exits the apparatus.  
11) Only use attachments/accessories specified by the  
21) Never block or cover the slots or  
openings in the TV cabinet back,  
bottom, and sides. Never place  
the TV:  
manufacturer.  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the  
on a bed, sofa, rug, or similar  
surface;  
too close to drapes, curtains,  
or walls; or  
apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
in a confined space such as a  
bookcase, built-in cabinet, or any  
other place with poor ventilation.  
The slots and openings are provided  
to protect the TV from overheating  
and to help maintain reliable  
operation of the TV.  
13) Unplug this apparatus during  
lightning storms or when  
unused for long periods  
of time.  
14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power supply  
cord or plug is damaged, liquid has  
22) Never allow anything to rest on or roll over the power  
cord, and never place the TV where the power cord is  
subject to wear or abuse.  
been spilled or objects have fallen into  
the apparatus, the apparatus has been  
exposed to rain or moisture, does not  
operate normally, or has been dropped.  
QUALIFIED  
SERVICE  
TECHNICIAN  
23) Never overload wall outlets and  
extension cords.  
15) CAUTION: To reduce the risk of electric shock, do not  
use the polarized plug with an extension cord, receptacle,  
or other outlet unless the blades can be inserted  
completely to prevent blade exposure.  
0303  
3
3N11501A[E] P02-06  
3
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30) [This item applies to projection TVs only.] If the air  
temperature rises suddenly (for example, when the TV is  
first delivered), condensation may form on the lenses. This  
can make the picture appear distorted or the color appear  
faded. If this happens, turn off the TV for 6 to 7 hours to  
allow the condensation to evaporate.  
24) Always operate this equipment from  
a 120 VAC, 60 Hz power source only.  
31) For added protection of your TV from lightning and power  
surges, always unplug the power cord and disconnect the  
antenna from the TV if you leave the TV unattended or  
unused for long periods of time.  
25) Always make sure the antenna system is properly  
grounded to provide adequate protection against voltage  
surges and built-up static charges (see Section 810 of the  
National Electric Code).  
Antenna lead-in wire  
32) During normal use, the TV may make  
occasional snapping or popping  
Antenna discharge unit  
(NEC Section 810-20)  
Ground clamp  
sounds. This is normal, especially  
when the unit is being turned on or  
off. If these sounds become frequent  
or continuous, unplug the power cord  
and contact a Toshiba Authorized Service Center.  
Grounding conductors  
(NEC Section 810-21)  
Electric service equipment  
Power service grounding  
33) Possible Adverse Effects on TV Picture Tube: If a fixed  
(non-moving) pattern remains on the TV screen for long  
periods of time, the image can become permanently  
engrained in the picture tube and cause subtle but  
permanent ghost images. This type of damage is NOT  
COVERED BY YOUR WARRANTY. Never leave your TV  
on for long periods of time while it is displaying the  
following formats or images:  
electrode system (NEC Art 250 Part H)  
Ground clamps  
26)  
DANGER: RISK OF SERIOUS PERSONAL  
INJURY OR DEATH!  
Use extreme care to make sure you are never in  
a position where your body (or any item you are in contact  
with, such as a ladder or screwdriver) can accidentally  
touch overhead power lines. Never locate the antenna  
near overhead power lines or other electrical circuits.  
Never attempt to install any of the following during  
lightning activity:  
a) an antenna system; or b) cables, wires, or any home  
theater component connected to an antenna or phone  
system.  
Fixed Images, such as PIP/POP windows, stock tickers,  
video game patterns, TV station logos, and websites.  
Special Formats that do not use the entire screen. For  
example, viewing letterbox style (16:9) media on a  
normal (4:3) display (gray bars at top and bottom of  
screen); or viewing normal style (4:3) media on a  
widescreen (16:9) display (gray bars on left and right  
sides of screen).  
Care  
Service  
34)  
For better performance and safer operation of your TOSHIBA  
TV, follow these recommendations and precautions:  
WARNING: RISK OF ELECTRIC  
SHOCK! Never attempt to service the  
TV yourself. Opening and  
27) Always sit approximately 1025 feet away from the TV and  
as directly in front of it as possible. The picture can appear  
dull if you sit too far to the left or right of the TV, or if  
sunlight or room lights reflect on the screen. Turn the TV  
off to check for reflections on the screen, and then remove  
the source of reflections while viewing the TV.  
removing the covers may expose  
you to dangerous voltage or other  
hazards. Refer all servicing to a  
Toshiba Authorized Service Center.  
QUALIFIED  
SERVICE  
TECHNICIAN  
35) If you have the TV serviced:  
Ask the service technician to use only replacement parts  
specified by the manufacturer.  
Upon completion of service, ask  
the service technician to perform  
routine safety checks to determine  
that the TV is in safe operating  
condition.  
28) Always unplug the TV before  
cleaning. Never use liquid or  
aerosol cleaners.  
36) When the TV reaches the end of its useful life, ask a  
qualified service technician to properly dispose of the TV.  
Improper disposal may result in a picture tube implosion  
and possible personal injury.  
29)  
WARNING: RISK OF ELECTRIC SHOCK!  
Never spill liquids or push objects of any kind  
into the TV cabinet slots.  
0303  
4
3N11501A[E] P02-06  
4
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Information .......................................................................................... 2-4  
Welcome to Toshiba............................................................................................................ 6  
Exploring your new TV ................................................................................................................................6  
Selecting a location for the TV ....................................................................................................................6  
Connecting your TV ............................................................................................................ 7  
Connecting a VCR .......................................................................................................................................7  
Connecting a cable converter box ...............................................................................................................8  
Connecting a DVD player/satellite receiver and a VCR ..............................................................................9  
Connecting a DVD player with ColorStream® (component video) and a VCR............................................9  
Connecting two VCRs ...............................................................................................................................10  
Connecting a camcorder ...........................................................................................................................10  
Connecting an audio amplifier ...................................................................................................................10  
Using the remote control...................................................................................................11  
Preparing the remote control for use......................................................................................................... 11  
Installing the remote control batteries ....................................................................................................... 11  
Using the remote control with a VCR, DVD player or cable TV converter ................................................ 11  
Programming the remote control for use with a VCR, DVD player, or cable TV converter ......................12  
VCR, DVD player, and cable TV converter codes.....................................................................................13  
Learning about the remote control ............................................................................................................14  
Setting up your TV ............................................................................................................ 15  
Changing the on-screen display language ................................................................................................15  
Adding channels to the TV’s memory........................................................................................................16  
Programming channels automatically ................................................................................................16  
Adding and erasing channels manually .............................................................................................16  
Changing channels ....................................................................................................................................16  
Using the TV’s features .................................................................................................... 17  
Adjusting the channel settings...................................................................................................................17  
Switching between two channels .......................................................................................................17  
Programming your favorite channels .................................................................................................17  
Using theV-Chip (parental control) feature (U.S. V-Chip system only) .....................................................18  
Selecting a PIN code ..........................................................................................................................18  
Blocking programs by ratings .............................................................................................................19  
Blocking unrated movies or programs................................................................................................22  
Using the LOCK menu...............................................................................................................................22  
Locking channels ................................................................................................................................22  
Locking video input.............................................................................................................................23  
Setting the game timer ..............................................................................................................................23  
Labeling channels......................................................................................................................................24  
Setting the clock ........................................................................................................................................25  
Setting the ON/OFF timer ..........................................................................................................................25  
Setting the on timer ............................................................................................................................25  
Setting the off timer ............................................................................................................................26  
Adjusting the picture quality ......................................................................................................................27  
Watching video input .................................................................................................................................27  
Selecting the ColorStream® mode .............................................................................................................27  
Displaying on-screen information ..............................................................................................................27  
Setting the sleep timer ...............................................................................................................................28  
Using the closed caption feature ...............................................................................................................28  
Changing the picture size ..........................................................................................................................28  
Adjusting the sound ...................................................................................................................................29  
Muting the sound ................................................................................................................................29  
Selecting stereo/SAP broadcasts .......................................................................................................29  
Adjusting the sound quality ................................................................................................................30  
Using the BBE sound feature .............................................................................................................30  
Using the surround sound feature ......................................................................................................31  
Using the StableSound® feature .........................................................................................................31  
Auto power off............................................................................................................................................31  
Understanding the Power Return feature..................................................................................................31  
Appendix ............................................................................................................................ 32  
Troubleshooting .........................................................................................................................................32  
Specifications.............................................................................................................................................33  
Limited United States Warranty .................................................................................................................34  
Limited Canada Warranty ..........................................................................................................................35  
5
3N11501A[E] P02-06  
5
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome to Toshiba  
Congratulations! You have purchased one of the finest color TVs on  
the market. The goal of this manual is to guide you through setting up  
and operating your Toshiba TV as quickly as possible.  
You may need to purchase other audio or video cables to connect your  
equipment. See “Connecting your TV” on page 7 for more information.  
Please read all the safety and operating instructions carefully before  
you begin.  
Exploring your new TV  
You can operate your TV by using the buttons on the front panel or the  
remote control. The front and back panels provide all the inputs you will  
need to connect other equipment to your TV.  
POWER  
CHANNEL  
VOLUME  
VIDEO-3 IN  
POWER  
TV  
VCR  
CABLE  
DVD  
L/MONO  
AUDIO  
R
VIDEO  
PHONES  
1
4
7
2
5
8
3
6
9
+10  
100  
0
Power indicator Volume  
Channel  
Phones  
Audio(L/R)/Video In  
POWER  
+
CH  
Remote sensor  
VOL  
VOL  
+
MENU/  
ENTER  
TV front panel  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
RESET CAP/TEXT  
1/2  
16:9  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
FF  
REW  
PLAY  
TV/VCR  
REC  
STOP  
PAUSE/STILL  
VCR CH  
DVD SKIP  
CT-847  
TV back panel  
Selecting a location for the TV  
Place the TV on the floor or on a sturdy platform in a location where  
light does not directly hit the screen.  
Place the TV far enough from the walls to allow proper ventilation.  
Inadequate ventilation may cause overheating, which may damage  
the TV.  
6
3N11501A[E] P02-06  
6
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting your TV  
If you haven’t connected electronic equipment before, or you have  
been frustrated in the past, you may wish to read this section. (Cables  
are not supplied.)  
A coaxial cable is the standard cable that comes in from your  
antenna or cable converter box. Coaxial cables use “F” connectors.  
Standard A/V (audio/video) cables are usually color coded  
according to use: yellow for video and red and white for audio. The  
red audio cable is for the stereo right channel, and the white audio  
cable is for the stereo left (or mono) channel. If you look at the rear  
panel of the TV, you will see that the terminals are color coded in  
the same manner as the cables.  
S-video cables provide better picture performance. S-video cables  
can only be used with S-video compatible components.  
Component video cables come in sets of three and provide the best  
picture performance. Component video cables can only be used  
with component video compatible components.  
Caution:  
Do not plug the TV in until you have finished  
connecting all of your equipment.  
S-Video  
Cable  
ANTENNA  
Coaxial Cable  
AUDIO  
Cables  
Component video  
Cables  
VIDEO  
Cable  
Connecting a VCR  
This connection allows you to watch local channels and video programs,  
play or record on the VCR while watching TV, and record from one  
channel while watching another channel.  
You will need:  
two coaxial cables  
one set of standard A/V cables  
TV  
Note:  
IN  
OUT  
VIDEO  
Y
P
If using a mono VCR, connect L/Mono to  
VCR Audio OUT using only one audio cable.  
For better picture quality, if your VCR has S-  
video, you can use an S-video cable instead  
of the standard video cable. Do not connect a  
standard video cable and an S-video cable to  
VIDEO1 simultaneously.  
VIDEO  
ANT (75)  
B
R
L/MONO  
L/MONO  
AUDIO  
R
S-VIDEO  
AUDIO  
P
R
VIDEO  
1
VIDEO  
2
Cable Lead-in  
from cable box  
or antenna  
Stereo VCR  
IN  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
L
R
VIDEO  
AUDIO  
7
3N11501A[E] P07-16  
7
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a cable converter box  
This television has an extended tuning range and can tune most cable  
channels without using a cable company supplied converter box. Some  
cable companies offer “premium pay channels” in which the signal is  
scrambled. Descrambling these signals for normal viewing requires the  
use of a descrambler device, which is generally provided by the cable  
company.  
For Subscribers to Basic Cable TV Service  
For basic cable service not requiring a Converter/Descrambler box,  
connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack  
on the back of the television.  
For Subscribers to Scrambled Cable TV Service  
If you subscribe to a cable service that requires the use of a Converter/  
Descrambler box, connect the incoming cable to the Converter/  
Descrambler box and connect the output of the box to the Antenna  
Jack on the back of the television. Follow the connections shown  
below. Set the television to the output of the Converter/Descrambler  
box (usually channel 3 or 4) and use the Converter/Descrambler box to  
select channels.  
For Subscribers to Unscrambled Basic Cable with  
Scrambled Premium Channels  
If you subscribe to a cable service in which basic cable channels are  
unscrambled and premium channels require the use of a Converter/  
Descrambler box, you may wish to use a two-set signal splitter (some-  
times called a “two-set coupler”) and an A/B Switch box from the cable  
installer or an electronics supply store. Follow the connections shown  
below. With the switch in the “B” position, you can directly tune any  
nonscrambled channels on your TV. With the switch in the “A” position,  
tune your TV to the output of the Converter/Descrambler box (usually  
channel 3 or 4) and use the box to tune scrambled channels.  
Note:  
When you use a converter box with your TV,  
there may be features that you cannot  
program using the remote control, such as  
labeling channels, blocking channels, and  
programming your favorite channels.  
Incoming CATV  
IN  
OUT  
VIDEO  
Y
P
VIDEO  
ANT (75)  
Converter/Descrambler  
B
R
L/MONO  
L/MONO  
AUDIO  
R
S-VIDEO  
AUDIO  
P
Converter/Descrambler  
R
VIDEO  
1
VIDEO  
2
A
Splitter  
A/B Switch  
B
8
3N11501A[E] P07-16  
8
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a DVD player/satellite receiver  
and a VCR  
You will need:  
three coaxial cables  
two sets of standard A/V cables  
one S-video cable  
one pair of standard audio cables  
This connection allows you to watch DVD/satellite, VCR, or TV  
programs. You can record from the satellite receiver and TV, as well as  
record one TV channel while watching another channel.  
To satellite  
DVD player/ Satellite Receiver  
Note:  
OUT  
L
You can use a standard video cable instead of  
the S-video cable, but the picture quality will  
decrease. If you use an S-video cable  
between the TV and DVD player/satellite  
receiver, make the audio connections only  
and remove the standard video cable.  
Satellite IN  
R
AUDIO  
S-VIDEO  
TV  
IN  
OUT  
Y
P
VIDEO  
ANT (75)  
B
R
L/MONO  
L/ONO  
AUDIO  
R
S-VO  
DIO  
P
R
VIDEO  
1
VIDEO  
2
To antenna  
Stereo VCR  
IN  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
L
R
VIDEO  
AUDIO  
Connecting a DVD player with ColorStream®  
(component video) and a VCR  
You will need:  
two coaxial cables  
one set of standard A/V cables  
one set of component video cables  
one pair of standard audio cables  
This connection allows you to watch DVD, VCR, or TV programs and  
record TV programs. You can record from one source while watching a  
program from another source. Your TV is capable of using ColorStream  
(component video). Connecting your TV to a component video compat-  
ible DVD player, such as a Toshiba DVD player with ColorStream®, can  
greatly enhance picture quality and performance.  
Note:  
The ColorStream inputs on this TV are for use  
with devices that output 480i interlaced  
signals ONLY. This TV will not accept or  
display 480p or 720p progressive scan  
signals or 1080i interlaced high-definition  
signals. If you connect a high-definition set-  
top receiver, 480p progressive scan DVD  
player, or other similar device to the TV’s  
ColorStream inputs, YOU MUST SWITCH  
THE DEVICE’S OUTPUT TO 480i INTER-  
LACED MODE FIRST. Failure to do this will  
cause a poor picture or no picture to display.  
DVD player with ColorStream®  
OUT  
L
COLORSTREAMTM  
R
Y
Cb  
Cr  
AUDIO  
VIDEO  
OUT  
S-VIDEO  
TV  
IN  
OUT  
VIDEO  
Y
P
VIDEO  
ANT (75)  
B
R
L/MONO  
L/MONO  
AUDIO  
R
S-VIDEO  
UDIO  
P
The unauthorized recording, use, distribu-  
tion or revision of television programs,  
videotapes, DVDs, and other materials is  
prohibited under the Copyright Laws of the  
United States and other countries, and may  
subject you to civil and criminal liability.  
VIDEO  
1
VIDEO  
2
To antenna  
Stereo VCR  
IN  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
L
R
VIDEO  
AUDIO  
9
3N11501A[E] P07-16  
9
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting two VCRs  
You will need:  
two coaxial cables  
This connection allows you to record (dub/edit) from one VCR to  
another VCR.  
You will also be able to record from one TV channel while watching  
two sets of standard A/V cables  
another channel.  
Stereo VCR / Playback  
To antenna  
Note:  
IN  
Do not connect the same VCR to the output  
and input jacks on the TV at the same time.  
For better picture quality, if your VCR has S-  
video, you can use an S-video cable instead  
of the standard video cable. Do not connect a  
standard video cable and an S-video cable to  
VIDEO1 simultaneously.  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
VIO  
AUDIO  
TV  
IN  
OUT  
Y
VIDEO  
AN)  
P
P
B
R
L/MONO  
NO  
AUDIO  
R
S-VIDEO  
AUDIO  
R
VIDEO  
1
VIDEO  
2
Stereo VCR/ Recording  
IN  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
L
R
VIDEO  
AUDIO  
Connecting a camcorder  
You will need:  
one set of standard A/V cables  
This connection allows you to watch video materials recorded on a  
camcorder.  
Camcorder  
Note:  
AUDIO  
VIDEO  
For better picture quality, if your camcorder  
has S-video, you can connect an S-video  
(and standard audio cables) to VIDEO1 on  
the back of the TV. Do not connect a standard  
video cable and an S-video cable to VIDEO1  
simultaneously.  
L
R
OUT  
VIDEO-3 IN  
Front Panel of TV  
L/MONO  
AUDIO  
R
VIDEO  
PHONES  
Connecting an audio amplifier  
You will need:  
one coaxial cable  
one pair of audio cables  
This connection allows you to use an audio amplifier to enjoy a high-  
quality sound. This also allows you to use external speakers.  
To control the audio, turn on the TV and the stereo amplifier.  
Audio Amplifier  
The unauthorized recording, use, distribu-  
tion or revision of television programs,  
videotapes, DVDs, and other materials is  
prohibited under the Copyright Laws of the  
United States and other countries, and may  
subject you to civil and criminal liability.  
AUDIO  
L
R
IN  
OUT  
TV  
To cable,  
cable box  
or antenna  
IN  
OUT  
VIDEO  
Y
VIDEO  
ANT (75)  
PB  
L/MONO  
L/MONO  
AUDIO  
R
S-VIDEO  
AUDIO  
PR  
2
R
VIDEO  
1
VIDEO  
10  
3N11501A[E] P07-16  
10  
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the remote control  
Preparing the remote control for use  
With the remote control, you can operate your TV, most VCR and DVD  
player models, and cable TV converters together, even if they are  
different brands. If you will be using your TV with a Toshiba VCR or  
DVD player, your remote control is already programmed and ready to  
use. If you own different brands of VCRs, DVD players and/or  
converters, you first have to program your remote control. (See  
“Programming the remote control for use with a VCR, DVD player, or  
cable TV converter” on page 12.)  
Note:  
The TV remote control may or may not  
operate your VCR, DVD player, or cable TV  
converter. Refer to the owner’s manuals  
supplied with the equipment to see which  
features are available. In addition, the original  
controllers may have features not available on  
this remote control. If you would like to  
continue to use these features, you may want  
to use the original remote control.  
Installing the remote control batteries  
To install the batteries:  
1. Open the battery cover on the back of the remote control.  
Cautions:  
• Dispose of batteries in a designated  
disposal area. Do not throw batteries into a  
fire.  
• Do not mix battery types or combine used  
batteries with new ones.  
• Remove dead batteries immediately to  
prevent battery acid from leaking into the  
battery compartment.  
• If you do not intend to use the remote control  
for a long time, remove the batteries.  
2. Install two “AAA” size batteries. Match the + and – signs on the  
batteries to the signs on the battery compartment.  
3. Close the battery cover on the remote control until the lock snaps.  
Using the remote control with a VCR, DVD player, or cable TV converter  
VCR  
To control a VCR:  
To control a DVD player:  
POWER  
POWER  
TV  
VCR  
CABLE  
DVD  
TV  
VCR  
CABLE  
Program the remote  
control to recognize the  
brand of your DVD  
player (see  
“Programming the  
remote control for use  
with a VCR, DVD player,  
or cable TV converter”  
on page 12). The  
buttons shown at right  
will then control the DVD  
player. Press the DVD  
button first.  
Program the remote  
control to recognize  
the brand of your VCR  
(see “Programming the  
remote control for use  
with a VCR, DVD  
player, or cable TV  
converter” on page  
12). The buttons  
Power  
Power  
DVD  
1
4
7
2
5
8
3
6
9
1
4
7
2
5
8
3
6
9
+10  
+10  
DVD  
100  
100  
Number  
buttons  
Channel  
Numbers  
0
0
+
CH  
+
CH  
DVD MENU  
//  
/
VOL  
VOL  
+
VOL  
VOL  
+
MENU/  
ENTER  
MENU/  
ENTER  
Enter  
Channel +/–  
CH Enter  
CH  
CH  
TOP Menu  
Volume  
/(TV)  
DVD Clear  
Display  
Fast Forward  
Play  
Rewind  
DVD Menu  
shown at right will then  
control the VCR. Press  
the VCR button first.  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
VOL  
FAV  
RESET CAP/TEXT  
1/2  
16:9  
RESET CAP/TEXT  
1/2  
16:9  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
Fast Forward  
CODE  
MTS  
SLEEP  
MUTE  
FF  
CODE  
MTS  
SLEEP  
MUTE  
FF  
Play  
Rewind  
REW  
PLAY  
REW  
PLAY  
TV/VCR  
REC  
STOP  
PAUSE/STILL  
TV/VCR  
REC  
STOP  
PAUSE/STILL  
TV/VCR  
Record  
VCR CH  
VCR CH  
DVD SKIP  
DVD SKIP  
Stop  
Stop  
DVD Skip  
/
VCR CH /▲  
Pause/Still  
Pause/Still  
11  
3N11501A[E] P07-16  
11  
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CABLE  
Power  
To control a cable TV  
converter:  
POWER  
TV  
VCR  
CABLE  
DVD  
Program the remote  
control to recognize the  
brand of your converter  
(see “Programming the  
remote control for use  
with a VCR, DVD player,  
or cable TV converter”  
below). The buttons  
shown at right will control  
the cable TV converter.  
Press the CABLE button  
first.  
1
4
7
2
5
8
3
6
9
+10  
100  
Channel  
Numbers  
0
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
Channel +/–  
CH Enter  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
RESET CAP/TEXT  
1/2  
16:9  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
FF  
REW  
PLAY  
TV/VCR  
REC  
STOP  
PAUSE/STILL  
VCR CH  
DVD SKIP  
VCR  
Programming the remote control for use with  
a VCR, DVD player, or cable TV converter  
POWER  
TV  
VCR  
CABLE  
DVD  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
This remote control is pre-programmed to operate Toshiba VCRs and  
DVD players. To control VCRs, DVD players, or cable converters other  
than Toshiba models, you must follow the steps below to program your  
remote control.  
+10  
100  
0
+
CH  
1. While holding down the CODE button, press the button for the  
device you want to control (VCR, DVD, or CABLE).  
2. Enter the 2-digit code listed on page 13 using the Number buttons  
(0–9) within 10 seconds.  
VOL  
VOL  
+
MENU/  
ENTER  
3. Point the remote control at the VCR, DVD player, or converter and  
press POWER to test the code.  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
If the VCR, DVD player, or converter turns on, you have entered  
the right code.  
VOL  
FAV  
16:9  
RESET CAP/TEXT  
1/2  
If the VCR, DVD player, or converter does not respond to the  
remote control, you may have entered the wrong code. Repeat  
steps 1~2 with another code.  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
FF  
Code  
REW  
PLAY  
For future reference, write down the codes you used:  
VCR code ________________________  
DVD player code ___________________  
Cable TV converter code_____________  
Notes:  
• When shipped from the factory, the remote  
control is set to operate your TV.  
• If you do not enter the code within 10  
seconds from step 1 or if you enter a code  
not listed below, this operation is canceled.  
• Each time you replace the batteries, you  
must reprogram the remote control.  
• Some newer VCRs are capable of working  
on either of two remote codes. These VCRs  
have a switch labeled “VCR1/VCR2.”  
If your VCR has this kind of switch and does  
not respond to any of the codes for your  
VCR, set the switch to the other position  
(VCR1 or VCR2) and reprogram the remote  
control.  
12  
3N11501A[E] P07-16  
12  
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR, DVD player, and cable TV converter codes  
13  
3N11501A[E] P07-16  
13  
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Learning about the remote control  
POWER turns the TV on and off  
Sleep programs the TV to turn off at a set time (page 28)  
TV/Video selects the video input source (page 27)  
Channel + / – cycles through programmed channels (page 16)  
TV/VCR/DVD/CABLE  
TV/VCR/DVD/Cable select TV, VCR, DVD, or CABLE mode (page 11)  
Channel Numbers allow direct access to channels (page 16)  
Volume + / – adjusts the volume level  
POWER  
TV  
VCR  
CABLE  
DVD  
POWER  
1
4
7
2
5
8
3
6
9
+10  
Channel  
Numbers  
100  
Channel Return returns to the last viewed channel (page 17)  
Menu/Enter allows access to programming menus, and sets pro-  
grammed menu information (page 15)  
0
+
CH  
Menu/Enter  
Channel +/–  
Favorite Channels ▲▲ cycle through favorite channels (page 17)  
Reset returns settings to preset factory formats (pages 27 and 30)  
CAP/TEXT turns closed captions or text on and off (page 28)  
VOL  
VOL  
+
MENU/  
ENTER  
Recall  
Exit  
Volume +/–  
TV/Video  
Favorite  
Channels ▲▲  
CH  
Volume ▲▲ (DVD)  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
1/2 selects closed caption/text channel 1 or 2 (page 28)  
Closed  
Captioning  
VOL  
FAV  
Mute turns off the sound (page 29)  
Channel Return  
16:9  
RESET CAP/TEXT  
1/2  
Reset  
MTS switches among STEREO, SAP, and MONO sound (page 29)  
Recall displays status information on-screen (page 27)  
CODE is used to program the remote control (page 12)  
Exit exits programming menus (page 15)  
16:9  
Display (DVD)  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
DVD Menu  
TOP Menu  
DVD Clear  
Code  
MTS  
CODE  
MTS  
SLEEP  
MUTE  
FF  
Mute  
Sleep  
FF  
REW  
PLAY  
Rew  
Play  
TV/VCR  
REC  
STOP  
PAUSE/STILL  
Pause/Still  
TV/VCR  
Rec  
16:9 toggles the aspect ratio between 4:3 (letterbox) and 16:9 (wide  
VCR CH  
screen) modes (page 28)  
VCR Channel  
▲▲/DVD Skip  
DVD SKIP  
Stop  
Stop stops a videotape/DVD  
Rec starts recording a videotape  
Play plays a videotape/DVD  
FF fast forwards a videotape/DVD  
Rew rewinds a videotape/DVD  
Pause/Still pauses a videotape/DVD  
TV/VCR toggles between TV and VCR modes when viewing while  
recording  
VCR Channel ▲▲ cycles through programmed channels of VCR  
DVD Skip  
skips chapter of DVD  
Display displays status information on-screen in the DVD  
Volume ▲▲ adjusts the volume level of DVD playback  
DVD Clear clears input data in the setting mode of DVD  
TOP Menu allows access to TOP menu of DVD  
DVD Menu allows access to DVD menu of DVD  
14  
3N11501A[E] P07-16  
14  
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your TV  
After you have installed the batteries and programmed the remote  
control, you need to set some preferences on the TV using the menu  
system. You can access the menu system with the buttons on the  
remote control.  
When you make a menu selection, your changes occur immedi-  
ately. You do not have to press MENU or EXIT to see your  
changes.  
After five seconds, the menu screen will automatically close if you  
do not make a selection. Your changes will still be saved.  
When you are finished programming the menus, press EXIT.  
POWER  
TV  
VCR  
CABLE  
DVD  
Changing the on-screen display language  
You can choose from three different languages (English, French and  
Spanish) for the on-screen displays. Adjustment menus and messages  
will appear in the language of your choice.  
1
4
7
2
5
8
3
6
9
+10  
100  
0
To select a language:  
+
CH  
1. Press MENU, then press or until the OPTION menu appears.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu  
Exit  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
2. Press or to highlight LANGUAGE.  
3. Press or to highlight your desired language.  
15  
3N11501A[E] P07-16  
15  
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding channels to the TV’s memory  
Your TV will stop on specific channels that are stored in the TV’s  
channel memory when you press Channel + or –. Use the steps below  
to set all active channels in your area automatically.  
Programming channels automatically  
Your TV can automatically detect all active channels and store them in  
its memory. After the TV has stored the channels in its memory auto-  
matically, you can add or erase channels manually.  
To add channels automatically:  
1. Press MENU, then press or to display the SETUP menu.  
2. Press or until the TV/CABLE  
selection is highlighted.  
3. Press or to highlight either  
TV or CABLE, depending on  
POWER  
TV  
VCR  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
+10  
100  
Channel  
Numbers  
which you use.  
0
+
CH  
Channel +/–  
If you use an antenna, choose TV.  
If you use cable, choose CABLE.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu  
4. Press to select CH PROGRAM.  
CH  
5. Press or to start channel programming. The TV will automati-  
cally cycle through all the TV or Cable channels (depending on  
which you selected), and store all active channels in the channel  
memory.  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
Exit  
16:9  
RESET CAP/TEXT  
1/2  
While the TV is cycling through the channels, the message  
“PROGRAMMING NOW-PLEASE WAIT” appears.  
6. When channel programming is complete, the message “COMPLETED”  
appears.  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
7. Press CH + or – to view the programmed channels.  
Adding and erasing channels manually  
After you have programmed the channels automatically, you can add or  
erase specific channels manually.  
To add or erase channels manually:  
1. Select the channel you want to add or erase.  
If adding channels, you must select the channel to add using the  
Channel Number buttons.  
2. Press MENU, then press or  
CH  
to display the SETUP menu.  
PICTURE AUDIO SETUP OPTION  
3. Press or to highlight ADD/  
TV / CABLE  
CABLE  
ERASE.  
CH PROGRAM  
ADD / ERASE  
START  
4. Press or to select ADD or  
ERASE, whichever function you  
want to perform.  
ADD ERASE  
SELECT  
ADJUST  
5. Repeat steps 1~4 for other  
channels you want to add or erase.  
Changing channels  
To change to the next programmed channel:  
Press Channel or on the TV or CH + or – on the remote  
control.  
To change to a specific channel (programmed or unprogrammed):  
Press the Channel Number buttons (0–9 and 100) on the remote  
control.  
For example, to select channel 125, press 100, 2, 5.  
16  
3N11501A[E] P07-16  
16  
8/1/18, 12:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV’s features  
POWER  
TV  
VCR  
CABLE  
DVD  
Adjusting the channel settings  
1
4
7
2
5
8
3
6
9
+10  
Switching between two channels  
You can switch between two channels without entering an actual  
channel number each time.  
100  
Channel  
Numbers  
0
+
CH  
To switch between two channels:  
1. Select the first channel you want to view.  
2. Select a second channel using the Channel Number buttons (0–9,  
100).  
VOL  
VOL  
+
MENU/  
ENTER  
3. Press CH RTN. The previous channel will be displayed.  
Each time you press CH RTN, the TV will switch back and forth  
between the two channels.  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
CH RTN  
16:9  
RESET CAP/TEXT  
1/2  
Programming your favorite channels  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
You can preset up to 12 of your favorite channels using the Favorite  
Channel Programming feature. Because this feature scans through  
only your favorite channels, it allows you to skip other channels you  
do not normally watch.  
CODE  
MTS  
SLEEP  
MUTE  
You can still use Channel + / – to scan through all the channels you  
programmed in the TV’s memory.  
To program your favorite channels:  
1. Select a channel you want to program.  
POWER  
TV  
VCR  
CABLE  
DVD  
2. Press MENU, then press or to display the OPTION menu.  
3. Press or to highlight FAVORITE CH.  
1
4
7
2
5
8
3
6
9
+10  
100  
Channel  
Numbers  
CH  
0
PICTURE AUDIO SETUP OPTION  
+
CH  
LANGUAGE  
ENGLISH  
CH LABEL  
FAVORITE CH  
V-CHIP  
START  
START  
START  
START  
OFF  
VOL  
VOL  
+
MENU/  
ENTER  
LOCK  
Menu/  
Enter  
ON/OFF TIMER  
COLORSTREAM DVD  
SELECT  
START  
CH  
Exit  
FAV  
FAV  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
4. Press or to display the FAVORITE CH menu. SET/CLEAR will  
be highlighted.  
VOL  
FAV  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
CH  
PICTURE AUDIO SETUP OPTION  
FAVORITE CH : CH 12  
SET/CLEAR  
SET UP CH  
SET CLEAR  
7
36  
4
1
12 125 63 40  
13 28 97 112  
TV CABLE  
SELECT  
SET  
ENTER  
END  
EXIT  
5. Press or to highlight SET and press ENTER.  
6. Press EXIT to close the screen.  
7. Repeat steps 1~6 for up to 11 other channels.  
To select your favorite channels:  
Press the FAV ▲ ▲ buttons on the remote control to select your  
favorite channels.  
The FAV ▲ ▲ buttons will not work until you have programmed  
your favorite channels.  
17  
3N11501A[E] P17-28  
17  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To clear your favorite channels:  
1. Select a channel you want to clear.  
POWER  
TV  
VCR  
CABLE  
DVD  
2. Press MENU, then press or to display the OPTION menu.  
3. Press or to highlight FAVORITE CH.  
4. Press or to display the FAVORITE CH menu. SET/CLEAR will  
be highlighted.  
1
4
7
2
5
8
3
6
9
+10  
100  
Channel  
Numbers  
0
+
CH  
CH  
PICTURE AUDIO SETUP OPTION  
VOL  
VOL  
+
MENU/  
ENTER  
FAVORITE CH : CH 12  
SET/CLEAR  
SET UP CH  
SET CLEAR  
Menu/  
Enter  
7
36  
4
1
12 125 63 40  
13 28 97 112  
TV CABLE  
SELECT  
CH  
SET  
ENTER  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
END  
EXIT  
VOL  
FAV  
Exit  
16:9  
RESET CAP/TEXT  
1/2  
5. Press or to highlight CLEAR.  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
CH  
PICTURE AUDIO SETUP OPTION  
FAVORITE CH : CH 12  
SET/CLEAR  
SET UP CH  
SET CLEAR  
7
36  
4
1
12 125 63 40  
13 28 97 112  
TV CABLE  
SELECT  
CLEAR  
ENTER  
END  
EXIT  
6. Press ENTER until “0” replaces the channel number you want to  
erase.  
7. Press EXIT to clear the screen.  
8. Repeat steps 1~6 for the other channels.  
Using the V-Chip (parental control) feature  
The V-Chip feature is available only for the U.S. V-Chip system. The  
Canadian V-Chip system is not supported.  
You can prevent others from viewing certain programs or channels by  
blocking them using the V-Chip feature.  
POWER  
TV  
VCR  
CABLE  
DVD  
Selecting a PIN code  
Before you can block programs and channels, you must select a  
personal identification number (PIN) code. The PIN code you select  
prevents others from changing the rating limits you set.  
1
4
7
2
5
8
3
6
9
+10  
100  
Channel  
Numbers  
0
To select your PIN code and access the V-Chip menus:  
1. Press MENU, then press or to highlight the OPTION menu.  
2. Press or to highlight V-CHIP.  
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
CH  
CH  
PICTURE AUDIO SETUP OPTION  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
LANGUAGE  
ENGLISH  
VOL  
FAV  
CH LABEL  
FAVORITE CH  
V-CHIP  
START  
START  
START  
START  
OFF  
Exit  
16:9  
RESET CAP/TEXT  
1/2  
LOCK  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
ON/OFF TIMER  
COLORSTREAM DVD  
CODE  
MTS  
SLEEP  
MUTE  
SELECT  
START  
Note:  
The PIN code you programmed is also used in the LOCK menu; see  
pages 22 and 23.  
18  
3N11501A[E] P17-28  
18  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press or to display the V-CHIP menu.  
CH  
PICTURE AUDIO SETUP OPTION  
V-CHIP  
Note:  
BLOCKING  
PIN CODE  
RESET  
SET  
If you forget your PIN code, press RECALL  
four times within five seconds from the V-CHIP  
menu. This allows you to proceed to the  
BLOCKING menu and resets your PIN code.  
SELECT  
END  
ENTER  
[0-9]  
EXIT  
4. Use the Channel Number buttons (0–9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Press ENTER. The  
BLOCKING menu appears.  
CH  
PICTURE AUDIO SETUP OPTION  
V-CHIP  
ENABLE BLOCKING ON OFF  
SET RATING  
BLOCKING OPTION START  
START  
NEW PIN CODE  
START  
SELECT  
ADJUST  
5. You may now enable blocking. See “Blocking programs by ratings”  
(below), “Locking channels” (page 22), “To change your PIN code”  
(below), or “Blocking unrated movies or programs” (page 22).  
To change your PIN code:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight V-CHIP.  
3. Press or to display the V-CHIP menu.  
4. Use the Channel Number buttons (0–9) to enter your PIN code.  
Press ENTER. The BLOCKING menu appears.  
5. Press or to highlight NEW PIN CODE and press or to  
display the NEW PIN CODE menu.  
6. Use the Channel Number buttons (0–9) to enter a new code.  
Press ENTER.  
7. Press EXIT to return to normal viewing.  
POWER  
TV  
VCR  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
+10  
Blocking programs by ratings  
100  
Channel  
Numbers  
The Motion Picture Association of America (MPAA) uses a rating  
system to qualify motion picture content. Television broadcasters  
employ a rating system to qualify the content of television programs, as  
well. The MPAA, Youth TV, and TV ratings work with the V-Chip feature  
and allow you to block programs according to the rating limits you set.  
0
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
CH  
Recall  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
Exit  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
19  
3N11501A[E] P17-28  
19  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MPAA Ratings  
X
For adults only.  
NC17  
R
Not intended for anyone 17 or under.  
Restricted. Under 17 requires an accompanying  
parent or adult guardian.  
PG13  
PG  
Parents strongly cautioned. Some material may be  
inappropriate for children under 13.  
Parental guidance suggested. Some material may  
not be appropriate for children.  
G
General audience. Appropriate for all ages.  
Youth TV Ratings  
Y7FV, Y7  
Directed to older children. This program is designed  
for children age 7 and above. Programs in which  
fantasy violence may be more intense or combative  
than other programs in this category are designated  
TV-Y7-FV.  
Y
All children. This program is designed to be appropri-  
ate for all children.  
Note:  
TV Ratings  
To see the rating of the program you are  
viewing, press RECALL at any time.  
MA  
Mature audience only. This program is specifically  
designed to be viewed by adults and therefore may  
be unsuitable for children under 17.  
Language  
Sex  
Violence  
Crude or indecent language.  
Explicit sexual activity.  
Graphic violence.  
14  
Parents strongly cautioned. This program contains  
some material that many parents would find unsuit-  
able for children under 14 years of age.  
Dialog  
Language  
Sex  
Intensely suggestive dialog.  
Strong, coarse language.  
Intense sexual situations.  
Intense violence.  
Violence  
PG  
Parental guidance suggested. This program contains  
material that parents may find unsuitable for younger  
children.  
Dialog  
Language  
Sex  
Some suggestive dialog.  
Infrequent coarse language.  
Some sexual situations.  
Moderate violence.  
Violence  
G
General audience. Most parents would find this  
program suitable for all ages.  
No DLSV  
Programs not rated according to Dialog, Language,  
Sex or Violence.  
20  
3N11501A[E] P17-28  
20  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To use the V-Chip to block programs by rating:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight V-CHIP.  
POWER  
TV  
VCR  
CABLE  
DVD  
3. Press or to display the V-CHIP menu.  
1
4
7
2
5
8
3
6
9
4. Use the Channel Number buttons (0–9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Press ENTER.  
The BLOCKING menu appears.  
+10  
100  
Channel  
Numbers  
0
+
CH  
VOL  
VOL  
+
CH  
MENU/  
ENTER  
PICTURE AUDIO SETUP OPTION  
Menu/  
Enter  
V-CHIP  
ENABLE BLOCKING ON OFF  
CH  
SET RATING  
BLOCKING OPTION START  
START  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
NEW PIN CODE  
START  
VOL  
FAV  
Exit  
SELECT  
ADJUST  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
5. Press or to highlight ENABLE BLOCKING.  
Press or to highlight ON to enable V-Chip program blocking  
by rating.  
Press or to highlight OFF to disable V-Chip program blocking  
by rating.  
6. Press or to highlight SET RATING. Then, press or to  
display the SET RATING menu.  
CH  
CH  
PICTURE AUDIO SETUP OPTION  
PICTURE AUDIO SETUP OPTION  
SET RATING  
TV RATING  
MA 14 PG  
G
X
MPAA  
DIALOG  
LANGUAGE  
SEX  
VIOLENCE  
NO DLSV  
V-CHIP MENU  
X NC17 R PG13 PG G  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
RATING  
X
X
X
X
X
X
YOUTH TV  
RATING  
Y7FV Y7 Y  
X
X
X
MORE  
SELECT  
START  
ADJUST  
ADJUST  
SELECT  
7. Press or to highlight MPAA Rating, Youth TV Rating or  
individual TV Ratings.  
8. Press or to select the ratings that will be blocked. Blocked  
ratings are signified by a red “X.” Unblocked ratings are signified by  
a green “.” As you block ratings, all ratings higher than the ones  
you select are blocked, as well. For example, if you choose to  
block the MPAA rating R, the higher ratings NC17 and X are  
automatically blocked too.  
Note:  
Not all programs are rated. To block programs  
or movies that are unrated, see “Blocking  
unrated movies or programs,” page 22.  
9. When you are done selecting the ratings to be blocked, press  
EXIT to return to normal viewing.  
When you try to view a program with a ratings block, a message will  
appear listing the program’s ratings. The program can still be viewed if  
you press MUTE and then enter your PIN code to temporarily bypass  
the block.  
21  
3N11501A[E] P17-28  
21  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blocking unrated movies or programs  
Some movies and programs are not rated. You can block these movies  
and programs using the V-Chip.  
To block unrated movies or programs:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight V-CHIP.  
3. Press or to display the V-CHIP menu.  
4. Use the Channel Number buttons (0–9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Press ENTER.  
The BLOCKING menu appears.  
5. Press or to highlight BLOCKING OPTION.  
6. Press or to display the BLOCKING OPTION menu.  
7. Press or to highlight MPAA UNRATED.  
Press or to highlight ON to block unrated movies.  
Press or to highlight OFF to unblock unrated movies.  
8. Press or to highlight TV NONE RATING.  
Press or to highlight ON to block programs with a rating of  
“TV NONE.” When you select ON, the message “NOTICE:  
ENABLING THIS OPTION MAY BLOCK EMERGENCY  
MESSAGES” appears.  
Note:  
Blocking television programs with a rating of  
“TV NONE” may block emergency messages.  
Press or to highlight OFF to unblock programs with a rating  
of “TV NONE.”  
9. Press EXIT to return to normal viewing.  
Using the LOCK menu  
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER,  
and NEW PIN CODE functions.  
You can use these functions after entering the correct PIN code. (This  
PIN code is the same one selected under “Selecting a PIN code” on  
page 18.)  
POWER  
TV  
VCR  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
Locking channels  
With the CH LOCK feature, you can lock specific channels. You will not  
be able to tune locked channels unless you clear the setting. You can  
choose to lock up to nine TV channels and nine cable channels.  
+10  
100  
Channel  
Numbers  
0
+
CH  
To lock channels:  
1. Use the Channel Number buttons (0–9) to display the television  
channel you wish to lock.  
2. Press MENU, then press or to display the OPTION menu.  
3. Press or to highlight LOCK.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
CH  
4. Press or to display the LOCK menu.  
5. Use the Channel Number buttons (0–9) to enter your PIN code,  
then press ENTER. The LOCK menu  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
Exit  
16:9  
RESET CAP/TEXT  
1/2  
appears.  
CH  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
PICTURE AUDIO SETUP OPTION  
6. Press or to highlight CH LOCK  
CODE  
MTS  
SLEEP  
MUTE  
and press or to display the CH  
LOCK  
CH LOCK  
VIDEO LOCK  
START  
OFF  
LOCK menu.  
7. Press or to select the following:  
SET– to set the channel as one to be  
locked. Then press ENTER.  
OFF  
GAME TIMER  
NEW PIN CODE START  
SELECT ADJUST  
Note:  
CLEAR– to clear all channels from the  
list of locked channels. Then press  
ENTER.  
After programming CH LOCK, change  
channels before turning off the television.  
CH  
PICTURE AUDIO SETUP OPTION  
8. Repeat steps 1 through 7 to lock other  
channels. When you are finished  
locking channels, press EXIT to return  
to normal viewing.  
CH LOCK : CH 12  
SET/CLEAR  
LOCKED CH  
SET CLEAR  
0
0
0
0
0
0
0
0
0
TV CABLE  
SELECT  
SET  
ENTER  
If you try to tune a locked channel, the TV  
will not display it, but will display the nearest  
unlocked channel.  
END  
EXIT  
22  
3N11501A[E] P17-28  
22  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To unlock channels:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight LOCK and then press or to display  
the LOCK menu.  
3. Use the Channel Number buttons (0–9) to enter your PIN code,  
then press ENTER. The LOCK menu appears.  
4. Press or to highlight CH LOCK and press or to display  
the CH LOCK menu.  
5. Press or to highlight CLEAR and clear all channels from the  
list of locked channels. Press ENTER.  
6. Press EXIT to return to normal viewing.  
Locking video input  
With the VIDEO LOCK feature, you can lock out the input sources  
(VIDEO1, VIDEO2, VIDEO3, COLORSTREAM) and channels 3 and 4.  
You will not be able to select the input sources with the TV/VIDEO  
button or Channel buttons unless you clear the setting.  
POWER  
TV  
VCR  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
+10  
To set up the video lock:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight LOCK.  
3. Press or to display the LOCK menu.  
4. Use the Channel Number buttons (0–9) to enter your PIN code,  
then press ENTER. The LOCK menu appears.  
5. Press or to highlight VIDEO LOCK.  
6. Press or to select:  
100  
Channel  
Numbers  
0
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
CH  
OFF: Unlocks all video input  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
sources.  
CH  
VOL  
FAV  
VIDEO: Locks VIDEO1, VIDEO2,  
VIDEO3 and COLORSTREAM.  
Exit  
PICTURE AUDIO SETUP OPTION  
16:9  
RESET CAP/TEXT  
1/2  
LOCK  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
VIDEO +: Locks VIDEO1, VIDEO2,  
VIDEO3, COLORSTREAM, channel 3  
and channel 4. This option should be  
used if you use the antenna terminal  
to play a video tape.  
CH LOCK  
VIDEO LOCK  
START  
OFF  
VIDEO VIDEO+  
OFF  
CODE  
MTS  
SLEEP  
MUTE  
GAME TIMER  
NEW PIN CODE START  
SELECT ADJUST  
Note:  
After programming VIDEO LOCK, change  
channels or activate the TV/VIDEO key before  
turning off the television.  
7. Press EXIT to return to normal viewing.  
Setting the game timer  
With the GAME TIMER feature, you can automatically activate the  
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a  
TV game (30, 60, 90 or 120 minutes).  
POWER  
TV  
VCR  
CABLE  
DVD  
To set up the game timer:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight LOCK.  
3. Press or to display the LOCK menu.  
4. Use the Channel Number buttons (0–9) to enter your PIN code,  
then press ENTER. The LOCK menu appears.  
5. Press or to highlight GAME TIMER.  
6. Press or to select a time limit (30 minutes, 60 minutes, 90  
minutes, 120 minutes or OFF).  
1
4
7
2
5
8
3
6
9
+10  
100  
Channel  
Numbers  
0
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
7. Press EXIT to return to normal  
CH  
CH  
viewing. After the GAME TIMER is  
programmed, the display will appear  
briefly every ten minutes to remind you  
that the GAME TIMER is operating.  
When the programmed time is  
reached, the display will change the  
channel automatically.  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
PICTURE AUDIO SETUP OPTION  
VOL  
FAV  
LOCK  
Exit  
CH LOCK  
VIDEO LOCK  
START  
OFF  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
GAME TIMER  
OFF 30 60 90 120  
NEW PIN CODE START  
SELECT ADJUST  
CODE  
MTS  
SLEEP  
MUTE  
23  
3N11501A[E] P17-28  
23  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Labeling channels  
Channel labels appear over the channel number display each time you  
turn on the TV, select a channel, or press the Recall button. You can  
choose any four characters to identify a channel.  
POWER  
TV  
VCR  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
To create channel labels:  
1. Select a channel you want to label.  
2. Press MENU, then press or until the OPTION menu appears.  
3. Press or to highlight CH LABEL.  
+10  
100  
Channel  
Numbers  
0
+
CH  
CH  
VOL  
VOL  
+
PICTURE AUDIO SETUP OPTION  
MENU/  
ENTER  
LANGUAGE  
ENGLISH  
Menu/  
Enter  
CH LABEL  
FAVORITE CH  
V-CHIP  
START  
START  
START  
START  
OFF  
CH  
LOCK  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
ON/OFF TIMER  
COLORSTREAM DVD  
SELECT  
VOL  
FAV  
START  
Exit  
16:9  
RESET CAP/TEXT  
1/2  
4. Press or to display the CH LABEL menu. SET/CLEAR will be  
highlighted.  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
CH  
PICTURE AUDIO SETUP OPTION  
CH LABEL : CH 12  
SET/CLEAR  
LABEL  
SET CLEAR  
SELECT  
SET  
ENTER  
END  
EXIT  
5. Press or to highlight SET.  
6. Press or to highlight LABEL.  
CH  
PICTURE AUDIO SETUP OPTION  
CH LABEL : CH 12  
SET/CLEAR  
LABEL  
SET  
SET  
SELECT  
ENTER  
END  
EXIT  
7. Press or to enter a character in  
the first space. Press the button  
repeatedly until the character you want  
appears on the screen. Press ENTER.  
8. Repeat step 7 to enter the rest of the  
characters.  
Note:  
CH  
The character will change as below.  
PICTURE AUDIO SETUP OPTION  
• • •  
• • •  
CH LABEL : CH 12  
0
9
A
SET/CLEAR  
LABEL  
SET  
A
+
Z
SPACE  
SELECT  
SET  
ENTER  
If you would like a blank space in the  
label name, you must choose an empty  
END  
EXIT  
space from the list of characters; otherwise, a dash will appear in  
that space.  
9. Repeat steps 1~8 for other channels. You can assign a label to  
each channel.  
10. Press EXIT to clear the screen.  
To erase channel labels:  
1. Select a channel with a label.  
2. Press MENU, then press or until the OPTION menu appears.  
3. Press or to highlight CH LABEL.  
4. Press or to display the CH LABEL menu.  
SET/CLEAR will be highlighted.  
5. Press or to highlight CLEAR.  
6. Press ENTER.  
7. Repeat steps 1~6 to erase other channel labels.  
24  
3N11501A[E] P17-28  
24  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the clock  
You must set the clock before you can program the ON/OFF timer.  
POWER  
TV  
VCR  
CABLE  
DVD  
To set the clock: (Example: 8:30 AM)  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight ON/OFF TIMER.  
1
4
7
2
5
8
3
6
9
+10  
100  
CH  
PICTURE AUDIO SETUP OPTION  
0
LANGUAGE  
ENGLISH  
+
CH  
CH LABEL  
FAVORITE CH  
V-CHIP  
START  
START  
START  
START  
LOCK  
VOL  
VOL  
+
MENU/  
ENTER  
ON/OFF TIMER  
COLORSTREAM DVD  
ON  
OFF SET  
Menu/  
Enter  
SELECT  
SET  
ADJUST  
ENTER  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
3. Press or to highlight SET, then press ENTER. The ON/OFF  
TIMER menu appears.  
VOL  
FAV  
Exit  
16:9  
RESET CAP/TEXT  
1/2  
4. Press or to highlight CLOCK, then press or to highlight  
the hour position.  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
CH  
PICTURE AUDIO SETUP OPTION  
ON/OFF TIMER  
CLOCK  
12:00 AM  
Note:  
ON TIMER  
12:00 AM  
CH 001  
CLEAR  
If the power source for the TV is interrupted (for  
example, the power cord is unplugged or a  
power failure occurs), you will need to reset the  
clock.  
OFF TIMER  
12:00 AM  
CLEAR  
ADJUST  
SELECT  
END  
EXIT  
5. Press or to set the hour, then press to highlight the minute  
position.  
CH  
PICTURE AUDIO SETUP OPTION  
ON/OFF TIMER  
CLOCK  
8:30 AM  
ON TIMER  
12:00 AM  
CH 001  
CLEAR  
OFF TIMER  
12:00 AM  
CLEAR  
ADJUST  
SELECT  
END  
POWER  
TV  
VCR  
CABLE  
DVD  
EXIT  
6. Press or to set the minutes, then press EXIT to return to  
1
4
7
2
5
8
3
6
9
normal viewing.  
+10  
100  
Setting the ON/OFF timer  
Setting the on timer  
0
+
CH  
This feature allows you to program the TV to turn on automatically at a  
set time. If you program the ON TIMER to “DAILY,” the TV will turn on  
every day at the same time to the same channel until you clear the ON  
TIMER.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
To set the on timer: (Example: Turning on the TV to channel 12 at  
7:00 AM, DAILY)  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight ON/OFF TIMER.  
3. Press or to highlight SET, then press ENTER. The ON/OFF  
TIMER menu appears.  
VOL  
FAV  
Exit  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
4. Press or to highlight ON TIMER and press or to highlight  
the hour position.  
Note:  
CH  
After a power failure or disconnection of the  
power, the timer settings will be lost.  
PICTURE AUDIO SETUP OPTION  
ON/OFF TIMER  
CLOCK  
12:00 AM  
ON TIMER  
12:00 AM  
CH 001  
CLEAR  
OFF TIMER  
12:00 AM  
CLEAR  
ADJUST  
SELECT  
END  
EXIT  
25  
3N11501A[E] P17-28  
25  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.Press or to set the desired hour, then press  
.
POWER  
TV  
VCR  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
+10  
100  
0
+
CH  
6.Set the desired minutes and channel, as in step 5.  
7. Press or to select ONCE or DAILY timer date.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
FAV  
VOL  
Exit  
Note:  
The ON TIMER has a one-hour automatic  
shut off. One hour after the ON TIMER has  
turned on the TV, the TV will turn off  
automatically unless you press any button or  
have set the OFF TIMER.  
8. Press EXIT to return to normal viewing.  
To cancel the on timer:  
Select CLEAR in step 7 above.  
Press EXIT to return to normal viewing.  
Setting the off timer  
This feature allows you to program the TV to turn off automatically at a set  
time. If you program the OFF TIMER to “DAILY,” the TV will automatically  
turn off every day at the same time.  
To set the off timer: (Example: Turning off the TV at 11:30 PM)  
1. Press MENU, then press or to display the OPTION menu.  
2. Press or to highlight ON/OFF TIMER.  
POWER  
TV  
VCR  
CABLE  
DVD  
3. Press or to highlight SET, then press ENTER.  
The ON/OFF TIMER menu appears.  
4. Press or to highlight OFF TIMER, then press or to  
highlight the hour position.  
1
4
7
2
5
8
3
6
9
+10  
100  
0
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
FAV  
5. Press or to set the desired hour, then press  
.
VOL  
Exit  
6. Set the desired minutes, as in step 5.  
7. Press or to select ONCE or DAILY.  
8. Press EXIT to return to normal viewing.  
To cancel the off timer:  
Select CLEAR in step 7 above.  
Press EXIT to return to normal viewing.  
26  
3N11501A[E] P17-28  
26  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the picture quality  
You can adjust the picture quality to your personal preferences,  
including the contrast, brightness, color, tint, and sharpness. The  
qualities you choose will be stored automatically in your TV’s memory  
so you can recall them at any time.  
POWER  
TV  
VCR  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
To adjust the picture quality:  
1. Press MENU, then press or to display the PICTURE menu.  
+10  
100  
0
CH  
+
CH  
PICTURE AUDIO SETUP OPTION  
CONTRAST  
BRIGHTNESS  
COLOR  
64  
32  
32  
0
VOL  
VOL  
+
MENU/  
ENTER  
Menu  
TINT  
SHARPNESS  
SELECT  
32  
CH  
ADJUST  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
2. Press or until the item you want to adjust is highlighted.  
Exit  
3. Press or to adjust the level.  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
Reset  
Selection  
Pressing  
CODE  
MTS  
SLEEP  
MUTE  
contrast  
brightness  
color  
tint  
sharpness  
lower  
darker  
paler  
reddish  
softer  
higher  
lighter  
deeper  
greenish  
sharper  
Note:  
To reset the picture adjustments to the factory  
settings, press RESET.  
4. Press EXIT to return to normal viewing.  
To select the input mode:  
Watching video input  
Press the TV/VIDEO button repeatedly to  
select the desired mode. The signal source  
you are connected to is displayed in light blue.  
You can use the TV/VIDEO button on the remote control to view a  
signal coming from other devices, such as VCRs or video disc players  
that may be connected to your TV. (See “Connecting your TV” on page  
7.)  
TV  
VIDEO 1  
VIDEO 2  
VIDEO 3  
COLOR  
STREAM  
Selecting the ColorStream® mode  
You can use the ColorStream (component video) input for connecting  
either a DVD player or a DTV receiver.  
1. Press MENU, then press or until  
the OPTION menu appears.  
2. Press or to highlight  
CH  
PICTURE AUDIO SETUP OPTION  
COLORSTREAM.  
LANGUAGE  
ENGLISH  
POWER  
TV  
VCR  
CABLE  
DVD  
3. Press or to highlight DVD or  
DTV, depending on which device is  
connected.  
CH LABEL  
FAVORITE CH  
V-CHIP  
START  
START  
START  
START  
OFF  
LOCK  
1
4
7
2
5
8
3
6
9
ON/OFF TIMER  
COLORSTREAM DVD DTV  
SELECT  
+10  
4. Press EXIT to return to normal viewing.  
ADJUST  
100  
Note:  
0
The factory setting is DVD.  
+
CH  
Displaying on-screen information  
Press RECALL to display the following  
VOL  
VOL  
+
MENU/  
ENTER  
Menu  
(
)
TV  
on-screen information:  
• Clock  
• Channel number or VIDEO mode  
selected  
12:00 AM  
STEREO  
SAP  
CABLE 007  
ABCD  
CH  
TV/Video  
Recall  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
• Channel label (if preset)  
Stereo or SAP (second audio program)  
audio status  
16:9  
RESET CAP/TEXT  
1/2  
MPAA  
X
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
Content rating  
27  
3N11501A[E] P17-28  
27  
8/1/18, 12:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the sleep timer  
You can set the TV so it turns off automatically.  
POWER  
TV  
VCR  
CABLE  
DVD  
To set the sleep timer:  
1
4
7
2
5
8
3
6
9
Repeatedly press SLEEP on the remote control to set the length of  
time until the TV turns off. The clock will count down 10 minutes for  
each press of the SLEEP button (120, 110, ...10, 0). After the sleep  
time is programmed, the display will appear briefly every ten minutes  
to remind you that the sleep timer is operating.  
+10  
100  
0
+
CH  
To confirm the sleep timer setting:  
Press SLEEP one time. The remaining time will be momentarily  
displayed.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu  
1/2  
To cancel the sleep timer:  
CH  
Repeatedly press SLEEP until the display turns to 0.  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
Using the closed caption feature  
16:9  
RESET CAP/TEXT  
1/2  
You have two options with the closed caption feature: captions or text.  
A caption is a printed version of the dialogue, narration and/or sound  
effects of a program. Text is information not related to the program that  
appears on half of the TV screen when available.  
16:9  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CAP/TEXT  
CODE  
MTS  
SLEEP  
MUTE  
Sleep  
To view captions or text:  
1. Select the desired program. Closed captioned programs are  
usually marked in your local TV listing as “CC.”  
2. Press CAP/TEXT repeatedly to select caption or text mode.  
Note:  
A closed caption signal may not be decoded  
in the following situations:  
• when a video tape has been dubbed  
• when the signal reception is weak  
• when the signal reception is non-standard  
When you choose a closed captioned channel  
and the text mode, the text screen always  
appears as a black box. When there is no  
signal, however, the text screen will not  
display text characters. Repeatedly press  
CAP/TEXT until the box disappears.  
3. Press 1/2 to select the caption or text channel.  
4. To turn off the closed caption feature, press CAP/TEXT  
repeatedly until captions or text no longer display on-screen.  
Changing the picture size  
You can change the picture size to 16:9 (widescreen) style.  
To view 16:9 style:  
Select the desired program, then press 16:9. The picture size will  
be displayed 16:9 style. “16:9” will appear on the screen for approx.  
4 seconds.  
To cancel 16:9 style:  
Press 16:9 again. The picture size will return to 4:3 style.  
16:9  
16:9 Widescreen  
4:3 Normal  
28  
3N11501A[E] P17-28  
28  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the sound  
POWER  
TV  
VCR  
CABLE  
Muting the sound  
DVD  
Press MUTE to temporarily turn off the sound. While the sound is off,  
the screen will display the word MUTE in the lower right-hand corner.  
To restore the sound, press MUTE again.  
1
4
7
2
5
8
3
6
9
+10  
100  
0
Selecting stereo/SAP broadcasts  
+
CH  
You can listen to high-fidelity stereo sound with the Multi-channel TV  
Sound (MTS) feature. MTS can also transmit a second audio program  
(SAP) containing a second language or other audio information.  
VOL  
VOL  
+
MENU/  
ENTER  
CH  
When the TV receives a stereo or SAP broadcast, the word STEREO  
or SAP appears on-screen every time the TV is turned on, the channel  
is changed, or the RECALL button is pressed.  
EXIT  
RECALL TV/VIDEO  
FAV  
VOL  
CH RTN  
FAV  
Recall  
16:9  
RESET CAP/TEXT  
1/2  
The MTS feature is not available in the VIDEO mode.  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
You can leave your TV in STEREO mode because it will automatically  
output stereo or monaural sound, depending on the broadcast type. If  
the stereo sound is noisy, select MONO to reduce the noise. The word  
STEREO or SAP is displayed in light blue when the TV receives the  
signal.  
CODE  
MTS  
SLEEP  
MUTE  
Mute  
MTS  
To select the desired MTS setting:  
Repeatedly press the MTS button to select either STEREO, SAP,  
MONO+SAP, or MONO. If the current program is not available in stereo  
or SAP, the setting will not be available when you press the MTS  
button.  
STEREO  
MONO  
SAP  
MONO + SAP  
If the current program is not broadcasting either stereo or SAP, those  
settings will not be available when you press the MTS button.  
29  
3N11501A[E] P29-BACK  
29  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the sound quality  
You can change the sound quality of your TV by adjusting the bass,  
treble, and balance.  
POWER  
TV  
VCR  
CABLE  
DVD  
1
4
7
2
5
8
3
6
9
To adjust the sound quality:  
1. Press MENU, then press or until the AUDIO menu appears.  
+10  
100  
0
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
Menu  
Reset  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
2. Press or to highlight the item you want to adjust.  
3. Press or to adjust the level.  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
Note:  
To reset the audio adjustments to the factory  
settings, press RESET.  
makes the sound quality weaker or decreases the balance in  
the right channel, depending on the item selected.  
makes the sound quality stronger or decreases the balance in  
the left channel, depending on the item selected.  
Using the BBE sound feature  
POWER  
TV  
VCR  
CABLE  
DVD  
By correcting the phase delay and distortion naturally generated by  
speaker systems, the BBE sound feature ensures that the sound that  
reaches your ears is as natural as the original sound. Human voices  
are clearer and music is natural and well-defined.  
1
4
7
2
5
8
3
6
9
+10  
100  
To turn on the BBE sound feature:  
1. Press MENU, then press or until the AUDIO menu appears.  
2. Press or to highlight BBE.  
0
+
CH  
3. Press or to highlight ON.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
To turn off the BBE sound feature:  
Highlight OFF in step 3 above.  
BBE and the BBE symbol are trademarks of  
BBE Sound, Inc.  
Licensed by BBE Sound, Inc. under  
USP4638258 and 4482866.  
Manufactured under license from BBE Sound,  
Inc.  
30  
3N11501A[E] P29-BACK  
30  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the surround sound feature  
POWER  
TV  
VCR  
CABLE  
DVD  
The surround sound feature expands the audio listening field wider and  
deeper to create exceptional sound quality from the TV’s speakers. The  
feature uses stereo signals from a TV broadcast or video input.  
1
4
7
2
5
8
3
6
9
+10  
To turn on the surround sound feature:  
1. Select the STEREO mode, if available (see “Selecting stereo/SAP  
broadcasts” on page 29.)  
2. Press MENU, and then press or until the AUDIO menu  
appears.  
100  
0
+
CH  
VOL  
VOL  
+
3. Press or to highlight SURROUND.  
4. Press or to highlight ON.  
MENU/  
ENTER  
Menu  
CH  
EXIT  
RECALL TV/VIDEO  
CH RTN  
FAV  
VOL  
FAV  
16:9  
RESET CAP/TEXT  
1/2  
DISPLAY DVD CLEAR TOP MENU DVD MENU  
CODE  
MTS  
SLEEP  
MUTE  
To turn off the surround sound feature:  
Highlight OFF in step 4 above.  
In general, you can leave your TV in surround mode because it will  
automatically output the type of sound being broadcast (surround  
stereo or monaural).  
Using the StableSound® feature  
The StableSoundfeature limits the highest volume level to prevent  
extreme changes in volume when the signal source is changed.  
To turn on the StableSound® feature:  
1. Press MENU, then press or until the AUDIO menu appears.  
2. Press or to highlight STABLE SOUND.  
3. Press or to highlight ON.  
To turn off the StableSound® feature:  
Highlight OFF in step 3 above.  
Auto power off  
The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its  
broadcast for the day and stops broadcasting on that channel. This feature does not work in VIDEO mode.  
Understanding the Power Return feature  
If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV  
on automatically.  
If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord  
from the wall outlet to prevent the TV from turning on in your absence.  
31  
3N11501A[E] P29-BACK  
31  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.  
Problem  
Solution  
TV will not turn on  
Make sure the power cord is plugged in, then press POWER.  
The remote control batteries may be dead. Replace the batteries.  
No picture, no sound  
Check the antenna/cable connections.  
This TV will not accept or display 480p or 720p progressive scan  
signals or 1080i interlaced high-definition signals through its  
ColorStream inputs. Switch the other device’s output to 480i interlaced  
mode first (see page 9).  
No sound, picture OK  
The sound may be muted. Press VOLUME.  
The station may have broadcast difficulties. Try another channel.  
• The MTS feature may be in SAP mode. Press the MTS button on the  
remote control until STEREO (or MONO) mode is active.  
Poor sound, picture OK  
Poor picture, sound OK  
The station may have broadcast difficulties. Try another channel.  
• The MTS feature may be in SAP mode. Press the MTS button on the  
remote control until STEREO (or MONO) mode is active.  
Check the antenna connections.  
The station may have broadcast difficulties. Try another channel.  
Adjust the PICTURE menu.  
This TV will not accept or display 480p or 720p progressive scan  
signals or 1080i interlaced high-definition signals through its  
ColorStream inputs. Switch the other device’s output to 480i interlaced  
mode first (see page 9).  
Poor reception of broadcast channels  
The station may have broadcast difficulties. Try another channel.  
Check the antenna connections.  
If you are using a VCR, make sure the TV/VCR button is set correctly.  
Cannot receive above channel 13  
Unable to select a certain channel  
Make sure TV/CABLE is set to CABLE mode.  
The channel may be blocked by the V-Chip feature or CH LOCK  
feature, or erased with the add/erase feature.  
Cannot access signal input sources (Video1,  
Video2, Video3 and ColorStream) and/or  
Channels 3 and 4  
Check the VIDEO LOCK feature.  
Multiple images  
The station may have broadcast difficulties. Try another channel.  
Use a highly directional outdoor antenna.  
Poor color or no color  
The station may have broadcast difficulties. Try another channel.  
Adjust the TINT and/or COLOR in the PICTURE menu.  
If you change the direction of the TV while it is turned on, the picture  
could suffer from color shading. If so, turn off the TV and allow it to cool  
for several hours before turning it on again.  
Black box on screen  
• Repeatedly press CAP/TEXT to turn off the Closed Caption Text mode.  
No stereo or SAP sound from a  
known MTS broadcast  
Make sure the MTS feature is set properly.  
The V-Chip PIN code does not work  
(U.S. V-Chip system only)  
Change or reset your PIN code (pages 18 and 19).  
The remote control does not operate  
Make sure the TV/VCR/DVD/CABLE mode is set properly.  
Remove all obstructions between the remote control and the TV.  
The remote control batteries may be dead. Replace the batteries.  
32  
3N11501A[E] P29-BACK  
32  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Picture Tube  
Type 27 (676.6 mm diagonal)  
NTSC standard  
Television system  
Channel coverage  
VHF: 2 ~ 13  
UHF: 14 ~ 69  
Cable TV: 4A, A-5 ~ A-1, A-I,  
+
+
J ~ W, W 1 ~ W 84  
Power source  
120V AC, 60 Hz  
Power consumption  
Audio power  
135 W  
5.0W + 5.0W  
Speaker type  
1-13/16 x 3-7/8 inches (46 x 99 mm) x 2 pcs.  
Video/Audio terminals  
S-VIDEO INPUT  
Y-INPUT: 1V (p-p), 75 ohm, negative sync.  
C-INPUT: 0.286V (p-p) (burst signal), 75 ohm  
VIDEO/AUDIO INPUT  
VIDEO: 1V (p-p), 75 ohm, negative sync.  
AUDIO: 150 mV (rms) (30% modulation equivalent, 47k ohm)  
ColorStream® (component video) INPUT  
Y: 1V (p-p), 75 ohm  
PR: 0.7V (p-p), 75 ohm  
PB: 0.7V (p-p), 75 ohm  
VIDEO/AUDIO OUTPUT  
VIDEO: 1V (p-p), 75 ohm, negative sync.  
AUDIO: 150 mV (rms) (30% modulation equivalent, 47k ohm)  
Dimensions  
Width: 29-1/8 inches (740 mm)  
Height: 22-5/8 inches (574.5 mm)  
Depth: 19-1/2 inches (495 mm)  
Weight  
88.2 Ibs. (40 kg)  
Supplied accessories  
Remote control with two size “AAA” batteries  
Design and specifications are subject to change without notice.  
33  
3N11501A[E] P29-BACK  
33  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited United States Warranty  
for 27'' FST PURE® and All Larger Television Models  
Toshiba America Consumer Products, L.L.C. (“TACP”) and Toshiba  
(4) Labor service charges for set installation, setup, adjustment of  
customer controls, and installation or repair of antenna systems  
are not covered by these warranties. Reception problems  
caused by inadequate antenna systems are your responsibility.  
Hawaii, Inc. (“THI”) make the following limited warranties to original  
consumers in the United States. THESE LIMITED WARRANTIES  
EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR  
ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM  
THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER  
PURCHASER OR TRANSFEREE.  
(5) Warranties extend only to defects in materials or workmanship  
as limited above and do not extend to any television or parts that  
have been lost or discarded by you or to damage to television or  
parts caused by misuse, accident, Acts of God (such as lightning  
or fluctuations in electric power), improper installation, improper  
maintenance, or use in violation of instructions furnished by  
TACP/THI; or to units that have been modified or had the serial  
number removed, altered, defaced, or rendered illegible.  
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN  
CANADA ARE NOT COVERED BY THESE WARRANTIES.  
PRODUCTS PURCHASED IN CANADA AND USED IN THE  
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.  
Limited One (1) Year Warranty on Parts and Labor*  
How to Obtain Warranty Services  
TACP/THI warrant this television and its parts against defects in  
materials or workmanship for a period of one (1) year after the date  
of original retail purchase. DURING THIS PERIOD, TACP/THI  
WILL, AT TACP/THI'S OPTION, REPAIR OR REPLACE A  
DEFECTIVE PART WITH A NEW OR REFURBISHED PART  
WITHOUT CHARGE TO YOU FOR PARTS OR LABOR. TACP/THI  
Authorized Service Station personnel will come to your home  
when warranty service is required. Depending on the type of repair  
required, either the service will be performed in your home or the  
set will be taken to the TACP/THI Authorized Service Station for  
repair and returned to your home at no cost to you.  
If, after following all of the operating instructions in this manual  
and checking the “Troubleshooting” section, you find that service  
is needed:  
(1) To find the nearest TACP/THI Authorized Service Station:  
For televisions purchased in the United States, except Hawaii,  
visit TACP’s web site at www.toshiba.com/tacp, or call toll  
free 1-800-631-3811.  
For televisions purchased in Hawaii, contact Toshiba Hawaii, Inc.,  
327 Kamakee Street, Honolulu, HI 96814, (808) 591-9281.  
(2) Present your bill of sale or other proof of purchase to the  
Authorized Service Station. Authorized TACP/THI Service Station  
personnel will come to your home when warranty service is  
required. Depending on the type of repair required, either the  
service will be performed in your home or the set will be taken to  
the Authorized Service Station for repair and returned to your  
home at no cost to you.  
Limited Two (2) Year Warranty on Picture Tube*  
TACP/THI further warrant the picture tube in this television against  
defects in materials or workmanship for a period of two (2) years  
after the date of original retail purchase. DURING THIS PERIOD,  
TACP/THI WILL, AT TACP/THI'S OPTION, REPAIR OR REPLACE  
A DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED  
PICTURE TUBE WITHOUT CHARGE TO YOU, EXCEPT THAT, IF  
A DEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED  
AFTER ONE (1) YEAR FROM THE DATE OF THE ORIGINAL  
RETAIL PURCHASE, YOU PAY LABOR CHARGES INVOLVED  
IN THE REPAIR OR REPLACEMENT.  
For additional information, visit TACPs web site:  
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE  
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF  
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE  
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW  
OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE  
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL  
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND  
SIMILAR OBLIGATIONS OF TACP OR THI WITH RESPECT TO  
THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT  
SHALL TACP OR THI BE LIABLE FOR CONSEQUENTIAL OR  
INCIDENTAL DAMAGES.  
Rental Units  
The warranty for rental units begins with the date of first rental  
or thirty (30) days from the date of shipment to the rental firm,  
whichever comes first.  
*Commercial Units  
Televisions sold and used for commercial purposes have a limited  
ninety (90) day warranty for all parts, labor, and picture tubes.  
No person, agent, distributor, dealer, or company is authorized  
to change, modify, or extend the terms of these warranties in  
any manner whatsoever. The time within which action must be  
commenced to enforce any obligation of TACP or THI arising under  
this warranty or under any law of the United States or of any state  
thereof is hereby limited to 90 days from the date you discover, or  
should have discovered, the defect. This limitation does not apply to  
implied warranties arising under the law of any state of the U.S.A.  
Owners Manual and Product Registration Card  
Read this owner’s manual thoroughly before operating this television.  
Complete and mail the enclosed product registration card within ten  
days after you, or the person who has given you this product as a  
gift, purchased this television. Returning the product registration  
card will enable TACP/THI to provide you with better customer  
service and improved product support. Failure to return the product  
registration card will not affect your rights under this warranty.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND  
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY  
FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE  
U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF  
AN IMPLIED WARRANTY, LIMITATIONS ON THE TIME WITHIN  
WHICH AN ACTION MAY BE BROUGHT, OR THE EXCLUSION  
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR  
EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH  
CIRCUMSTANCES.  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING  
CONDITIONS:  
(1) You must provide your bill of sale or other proof of purchase.  
(2) All warranty servicing of this television must be made by an  
Authorized TACP/THI Service Station.  
(3) The warranties from TACP and THI are effective only if the  
television is purchased and operated in the U.S.A. or Puerto  
Rico.  
FST PURE® is a registered trademark of Toshiba America Consumer Products, L.L.C.  
REV. MAR02  
34  
3N11501A[E] P29-BACK  
34  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Canada Warranty  
for 27'' FST PURE® and All Larger Television Models  
Toshiba of Canada Limited (“TCL) makes the following limited  
warranties to original consumers in Canada.  
(4) Labor service charges for set installation, setup, adjustment of  
customer controls, and installation or repair of antenna systems  
are not covered by these warranties. Reception problems  
caused by inadequate antenna systems are your responsibility.  
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL  
CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS  
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER  
PURCHASER AND TO NO OTHER PURCHASER OR  
TRANSFEREE.  
(5) Warranties extend only to defects in materials or workmanship  
as limited above and do not extend to any television or parts that  
have been lost or discarded by you or to damage to television or  
parts caused by misuse, accident, Acts of God (such as lightning  
or fluctuations in electric power), improper installation, improper  
maintenance, or use in violation of instructions furnished by TCL;  
or to units that have been modified or had the serial number  
removed, altered, defaced, or rendered illegible.  
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN  
CANADA ARE NOT COVERED BY THESE WARRANTIES.  
PRODUCTS PURCHASED IN CANADA AND USED IN THE  
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.  
How to Obtain Warranty Services  
Limited One (1) Year Warranty on Parts and Labor*  
If, after following all of the operating instructions in this manual and  
checking the “Troubleshooting” section, you find that service is  
needed:  
TCL warrants this television and its parts against defects in materials  
or workmanship for a period of one (1) year after the date of original  
retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL'S  
OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A  
NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU  
FOR PARTS OR LABOR. TCL Authorized Service Depot personnel  
will come to your home when warranty service is required.  
Depending on the type of repair required, either the service will  
be performed in your home or the set will be taken to the TCL  
Authorized Service Depot for repair and returned to your home at  
no cost to you. IN-HOME SERVICE ONLY APPLIES WITHIN 100  
KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT.  
(1) To find the nearest TCL Authorized Service Depot, visit TCLs  
web site: www.toshiba.ca.  
(2) Present your bill of sale or other proof of purchase to the  
Authorized Service Depot. Authorized TCL Service Depot  
personnel will come to your home when warranty service is  
required. Depending on the type of repair required, either the  
service will be performed in your home or the set will be taken  
to the Authorized Service Depot for repair and returned to your  
home at no cost to you. IN-HOME SERVICE ONLY APPLIES  
WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL  
SERVICE DEPOT.  
Limited Two (2) Year Warranty on Picture Tube*  
For additional information, visit TCLs web site:  
TCL further warrants the picture tube in this television against  
defects in materials or workmanship for a period of two (2) years  
after the date of original retail purchase. DURING THIS PERIOD,  
TCL WILL, AT TCL'S OPTION, REPAIR OR REPLACE A  
DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED  
PICTURE TUBE WITHOUT CHARGE TO YOU, EXCEPT THAT,  
IF A DEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED  
AFTER ONE (1) YEAR FROM THE DATE OF THE ORIGINAL  
RETAIL PURCHASE, YOU PAY LABOR CHARGES INVOLVED  
IN THE REPAIR OR REPLACEMENT.  
ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE  
OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF  
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE  
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW  
OF ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE  
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL  
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND  
SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE  
REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT  
SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR  
Rental Units  
The warranty for rental units begins with the date of first rental or  
thirty (30) days from the date of shipment to the rental firm,  
whichever comes first.  
INCIDENTAL DAMAGES.  
No person, agent, distributor, dealer, or company is authorized  
to change, modify, or extend the terms of these warranties in  
any manner whatsoever. The time within which action must be  
commenced to enforce any obligation of TCL arising under this  
warranty or under any law of Canada or of any province thereof,  
is hereby limited to 90 days from the date you discover, or should  
have discovered, the defect. This limitation does not apply to implied  
warranties arising under the law of any province of Canada.  
*Commercial Units  
Televisions sold and used for commercial purposes have a limited  
ninety (90) day warranty for all parts, labor, and picture tubes.  
Owners Manual  
Read this owner’s manual thoroughly before operating this television.  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING  
CONDITIONS:  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,  
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY  
VARY FROM PROVINCE TO PROVINCE IN CANADA. SOME  
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON  
THE DURATION OF AN IMPLIED WARRANTY, LIMITATIONS  
ON THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT,  
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE  
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU  
UNDER SUCH CIRCUMSTANCES.  
(1) You must provide your bill of sale or other proof of purchase.  
(2) All warranty servicing of this television must be made by an  
Authorized TCL Service Depot.  
(3) The warranties from TCL are effective only if the television is  
purchased in Canada from an authorized TCL dealer and  
operated in Canada.  
FST PURE® is a registered trademark of Toshiba America Consumer Products, L.L.C.  
REV. MAR02  
35  
3N11501A[E] P29-BACK  
35  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
National Service Division  
Service Centers:  
ColorStream®, FST Pure® and StableSound® are registered  
trademarks of Toshiba America Consumer Products, L.L.C.  
PRINTED IN THAILAND  
04/01  
L
3N11501A[E] P29-BACK  
36  
8/1/18, 12:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Technicolor Thomson CRT Television 2 8 W S 2 3 E User Manual
Technicolor Thomson Network Router ST585 V6 User Manual
Technics Stereo System SL 1200MK2PK User Manual
Toshiba Network Card SD R2102 User Manual
Toshiba Projector TDP TW90A User Manual
TRENDnet Modem 1206 User Manual
ViewSonic Car Video System CDE4600 L User Manual
ViewSonic Projector PJD5351 User Manual
Vivitar Digital Camera VIV CV 1025V User Manual
Weber Gas Grill Natural Gas Barbecues User Manual