DEEP FAT FRYER
MODEL
TMFE15,TMFE30
Installation and
Operation
Instructions
2M-Zꢀ3007 Rev. A March ꢀ5, 20ꢀ2
is a registerd trademark of Toastmaster, A Middleby Company. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INSTALLATION DATA
This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor for use
directly by the general public in food service locations.
CAUTION
Before using your new equipment, read and understand all the instructions & labels associated
with the unit prior to putting it into operation. Make sure all people associated with its use
understand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If
equipment is received in damaged condition, either apparent or concealed, a claim must be made
with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked,
a request for inspection of concealed damage must be made with carrier within ꢀ5 days.
Be certain to retain all contents plus external and internal packaging materials for inspection.
The carrier will make an inspection and will supply necessary claim forms.
WARNING: Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death. Read the
installation, operatingandmaintenanceinstructionsthoroughlybefore
installing or servicing the equipment.
Thisfryerisequippedforthevoltageandwattageindicatedonthenameplatemounted
on the underside of the front edge. It is designed for use on alternating current (AC)
only. It is intended for use by properly trained personnel only.
DO NOT CONNECT TO DIRECT CURRENT (DC)
The installation of the appliance should conform to:
WARNING
NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND
ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND
REGULATIONS
MODEL: TMFE15
Proper connections and power supply are essential for efficient performance. Connect six foot
lead in cord to a suitable grounded outlet of the correct voltage. Be sure the switch is in the off
position. The receptacle should match the plug (NEMA configuration of receptacle is: 6-30R).
MODEL: TMFE30
For your protection we recommend that a qualified electrician install this appliance. They should
be familiar with electrical installations and all electrical codes. Proper connections and power
supply are essential for efficient performance. The external wiring should be in conduit of an
approved type of flexible cable suitable for operation at 194°F (90°C) and of a proper size to carry
the load.
Four legs are provided and should be installed for ease of cleaning. Level unit by adjusting the
(4) feet which have an adjustment of 1-3/8" (35 mm) for accurate leveling and perfect line-up with
other units.
POWER SUPPLY
The Model TMFEꢀ5 & TMFE30 is wired at the factory for operation on a single phase power
supply 208/240V, 60 Hz.
DO NOT INSTALL WITHOUT FEET.
PLACE THE LAMINATED WARNING SIGN SUPPLIED WITH THE FRYER IN AN
AREA VISIBLE TO THE FRYER OPERATOR.
CAUTION
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
CLEAN KETTLE BEFORE USING
Take out baskets, push down and hold element catch, located on left side of element housing. Lift up
on element lift handle until elements lock in a vertical position, and remove kettle. The kettle can be
cleaned in a sink like any other pot or container.
ADDING FAT
Replace kettle and swing the element down by holding element lift handle and pushing release catch
down and holding it there. Lower element. Fryer is now ready for use. Add fat. A fat level line on the
rear of the kettle will guide you in determining the minimum cold fat level. A higher fat level can be
used when frying bulky foods, such as chicken or fish cakes. The fat level should be chosen carefully
so that the foaming action of the fat does not spill out of the kettle. If solid shortening is used, pack
carefully around the elements. TMFEꢀ5 has one single ꢀ5lbs capacity kettle, TMFE30 has two.
CONTROLS
ꢀ. ON/OFF TWO-POLE SWITCH - Located on the front panel is a two-pole switch which turns
power on or off.
2. THERMOSTAT CONTROL - Located on the Control Housing, this control allows you to select
the desired frying temperature. A signal light indicates when the element is on. When the light
goes off, the desired temperature has been reached.
3. HI-LIMIT THERMOSTAT - Should fat temperatures reach 450°F (230°C), this control will shut
off the power. The light on the control panel will go out. The fat temperature must cool to
400°F (202.4°C) and the manual reset button located on the back panel of the control housing
must be pressed to restore operation. Should the hi-limit control activate twice in succession,
the primary thermostat should be checked for malfunction by a qualified service technician.
FRYING
After fat has been added, turn the switch on and set the thermostat at 200°F (92.4°C). After the fat
has melted, turn the thermostat to the desired setting. Included in this instruction booklet is a frying
chart and some helpful hints on fat use. After the selected fat temperature has been reached, the
signal light goes out. Slowly lower half filled baskets into the fat. Do not overload baskets as this
causes foods to be improperly fried. When moist food is lowered too quickly into hot fat, the fat will
foam and spatter excessively.
NOTE: Baskets should be allowed to drain after frying cycle. The kettle handles serve as
basket hangers.
IDLING
During idle periods turn thermostat control to approximately 200°F (92.4°C). The fast recovery fryers
can be brought up to frying temperature in a matter of minutes. Lowering the temperature during idle
periods saves energy costs and prolongs fat life. To turn off fryer turn the on/off switch to the "off"
position.
DRAINING KETTLE
Turn switch to "OFF". Remove baskets. Raise element to the first stop and allow to drain. Raise the
element to the vertical position and siphon the oil out of the kettle.
DO NOT ATTEMPT TO REMOVE THE KETTLE FILLED WITH HOT OIL. CONTACTING HOT
OIL CAN RESULT IN SEVERE INJURIES OR DEATH.
CAUTION
If you do not have a siphon, order one from your dealer or dip the oil out and strain into a
container. After oil has been removed, remove the kettle and clean.
CLEANING THE EXTERIOR
The exterior surfaces can be cleaned by regularly wiping with a soft cloth. Any discoloration can be
removed with a non-abrasive cleaner.
MAINTENANCE AND REPAIRS
Contact the factory or one of its representatives or a local service company for service or
maintenance if required.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS FOR ALL DEEP FAT FRYERS
NEVER LEAVE AN OPERATING FRYER UNATTENDED
REMEMBER HOT OIL IS DANGEROUS – RESPECT IT!
WARNING – MAINTENANCE
WARNING – INSTALLATION
• Have your equipment checked regularly to
insure its safe and properly functioning.
• Locate your fryer in a protected place so
that it cannot be tipped over or knocked
off its support. A mechanical restraint
should be installed to prohibit the fryer
from tipping or moving. Consult your local
codes for allowable methods of restraint.
• If your fryer starts to smoke or boil
abnormally, cut off the power supply
immediately and determine the reason for
the smoking or boiling before attempting
to use it again.
• Install an automatic fire extinguisher over
the fryer and in the exhaust duct.
WARNING – TRAINING
• Be sure your power supply is installed
properly and in accordance with the local
and national codes.
• Train all personnel to understand the
hazards of hot oil. Instruct them on the
proper action to take if something does
not seem to be acting properly.
• Install a shut-off switch or gas valve close
to the fryer. It must turn off the fryer
immediately.
• Instruct your personnel on what to do if
there is an oil fire. Do not use water on
an oil fire! Use only fire extinguishers of
the approved type and never direct such
extinguishers so as to blow the oil out of
the oil container.
• Failure to add a mechanical restraint can
result in oil splashing out and contacting
the skin, leading to serious injury or death!
WARNING – HOT OIL
• Inappropriate use due to a lack of
common sense may result in product
damage or personal injury.
• Hot oil is dangerous – Severe burns can
result when hot oil contacts the skin.
• Hot oil is flammable – Keep open flames
away from hot oil and its vapors.
• Never allow water or ice to get in hot oil.
IT CAN EXPLODE!
WARNING - ENVIRONMENT
• Keep your floors clean and free of grease
and all other substances so no one slips
accidentally and contacts the hot fryer.
• Keep areas and filters clean above your
fryers – Oil soiled lint or dust can ignite
easily and flames will spread rapidly.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE OF FAT
A number of commercial devices and materials are
In three to six months you may spend as much
for fat as you paid for your kettle. So fat is an item
you want to know all about; how to select it; how to
manage it. The more production you can get from
each pound of fat, the more profitable your frying
operation will be.
available to aid in eliminating fat impurities. There
are several excellent models of pressure filters as
well as strainer-type filters, which, if used regularly,
will prolong life of fat.
However, no purification device will renew broken
down or rancid fat or put new life into it. Once you
haveallowedfattobreakdownitbecomesunsuitable
for frying — in fact browning is impossible.
To get a high rate of production per pound of fat you
have to avoid two things. One is early breakdown
and spoilage of the compound so that you have to
throw it away before it does enough work to "earn
its keep." The other is excessive sponging up of fat
by the food being fried.
Inadditiontofiltration,youcanprolongtheusefulness
offatbysweeteningitwithfreshcompoundeveryday
- replacing about ꢀ5% of the bulk you started with. If
you do enough frying so that normal absorption of fat
infoodamountstoꢀ5%to20%ofthecapacityofyour
kettleeveryday-thenyoucancallthatyourturn-over
food. It means you can add the recommended ꢀ5%
of fresh fat without discarding any of the old.
The main cause of fat breakdown is excessive heat.
On the other hand abnormal absorption is caused by
frying too long at too low temperatures. One answer
to both problems is exact control of heat — so that
fat neither smokes up nor soaks up.
Of course, no fat "keeps" forever. Not only heat,
but air and moisture, salt particles and crumbs of
food work to break it down. But you can slow up fat
deteriorationbymaintainingpropertemperaturesand
by draining your kettle, filtering or straining the fat
once or twice a day and by keeping the kettle itself
absolutely clean.
10 POINT PROGRAM
TO PRESERVE FAT AND PRODUCE THE FINEST FRIED FOODS
ꢀ. Choose a fat that does not break down quickly.
6. Discard fat that tends to bubble excessively
Hydrogenated shortening, corn, and peanut
oils are less likely to break down under high
temperatures.
before food is added.
7. Donotoverloadbaskets-piecesshouldnottouch
whenfrying.Shakebasketstopreventfoodfrom
sticking together. Fry similar sizes together.
2. Do not fry foods at temperatures above those
recommended. The higher the fat temperature,
themorerapidtherateoffatdeterioration.Above
400°F fats quickly deteriorate.
8. Never salt foods directly over fat, salt in fat
reduces its life.
3. During short intervals between frying, turn the
heatdown. Donotkeepheatonforlongperiods
between batches.
9. Raw, wet foods, such as potatoes and oysters,
should be drained or wiped dry before frying to
extend the life of the frying fat. Have foods to
be fried at room temperature.
4. Keep fat clean. Strain or filter daily or at end of
each shift. Add at least ꢀ5% fresh fat to your
kettle daily.
10. Keep fat temperatures below smoking point to
minimize frying odors.
5. At least once a day, cool a small amount of fat
and taste it to see if it has picked up foreign
flavors.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDY FRYING CHART
TIME IN
FOOD
COATING
PROCEDURE
TEMP
MINUTES
POTATOES
Standard French Fries
Blanch Only
Brown Only
Cut in uniform pieces 1/2”
square the long way
350°
350°
350°
5-7
3-1/2
3-1/2
Long Branch
Cut in uniform pieces 3/4”
square the long way
350°
350°
350°
7-10
3-6
Julienne (shoe string)
Cut in uniform pieces 1/8”
to 1/4” square the long way
Soak in cold running water
until water does not run milky
Chips
2-3
CHICKEN
Large Pieces
Small Pieces
Pre-cooked
Batter or
Breading
Some prefer rolling in
seasoned flour, dipping in egg
wash, and frying
325°
340°
350°
9-1l
7-10
3-4
FISH
Fillets (Large)
Fillets (Small)
Oysters
Breading
or Batter
Breading
or Batter
Batter
Select fillets of uniform
size, skin out and dry.
Use Oyster liquor in batter
or breading
350°
350°
4
3
350°
350°
350°
5
1
4
Clams
Scallops
Shrimp
Breading
Batter
Some prefer soaking 1/2 hour
in cold seasoned milk
Cut spinal cord several
places to prevent curling
350°
350°
3
4
Smelts
Breading
MEATS
Chicken Fried Steak
Breading
Sever all connecting membranes
at one inch intervals to prevent
curling
360°
350°
340°
3-4
3-4
3-4
Cutlets
Chops
Breading
Breading
Meat Balls
Breading or
rolled in flour
Breading
340°
340°
4-6
3-5
Brains
VEGETABLES
Asparagus
Cauliflower
Egg Plant
Batter or crumbs
Batter or crumbs
Crumb Breading
Pre-cook in salted water
Pre-cook and separate flowers
Peel, cut cross-wise into 1/4”
slices
Slice thin, soak in milk for
two hours
350°
350°
3
3
350°
350°
3
3
Onions
Light batter
FRITTERS
Fruit (bananas, pineapples, apricots, berries)
Serve with fruit juice
Serve with syrup or jelly
Serve with tomato cheese sauce
350°
350°
350°
3-5
3-5
5-8
Corn
Batter
Vegetable (peas, green beans)
MISCELLANEOUS
Croquettes
Chinese Noodles
French Toast
Breading
360°
375°
375°
3
1-2
1
DOUGHNUTS
Cake
Yeast, raised
375°
375°
1-1/2 - 2
1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
24
23
22
21
20
17
19
25
18
16
15
13
26
27
38
28
29
12
10
11
30
9
8
31
32
33
7
34
6
5
35
4
36
14
40
3
39
2
37
1
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO TOASTMASTER.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
MODEL: TMFE15
Electric Fryer
SK2434
Rev. A
3/15/12
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
March ꢀ5, 20ꢀ2, Rev. A
Model: TMFE15, Electric Fryers
Part No Description
Fig No
1
2
3
4
5
6
7
8
Qty
4
1
1
1
1
8
2
1
8
1
1
2
1
1
1
1
1
1
2
1
4
1
1
1
1
1
1
3
4
2
1
1
4
6
1
1
1
1
1
2
1
2R-Y5092
2M-Z13007
2E-Y5166
2D-301007
E3-Y7254
2C-2555
E3-Y5940
E3-301043
2C-H1578
E3-9280
2N-Z2920
E3-9288
2R-Z13078
E1-Z1390
E3-Y7359
2R-9572
E3-301060-PS
2P-9274
2A-Y1105
2T-Z7268
E1-7363
E3-301059
2T-Z3209
2K-Y6764
E3-301044
E3-9262
E3-Y1621
E3-9270
E3-9269
E3-7674
2I-9277
E3-9276
2P-Y3453
2P-5737
2B-301042
2B-301041
E3-301046
2M-Z7219
2M-Z8942
2C-Z4341
2M-Z8943
BLACK PLASTIC LEG
FACEPLATE TMFE15
CIRCUIT BREAKER
KETTLE ASSEMBLY
PANEL-BACK
NUT-ACORN
LOWER ELEMENT CLAMP
HANDLE-CLAMP ASSEMBLY
SCREW-8-32X1
CLAMP-ELEMENT
ELEMENT 5500 WATT
BUSHING-SPLIT
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
NI
KNOB-ELEC FRYER
SWITCH GUARD
BRACKET-THERMO
KNOB-HARRY DAVIE
RELEASE ROD/PAWL KIT
SPRING-RELEASE
PIN ROLL
THERMOSTAT
CLAMP-THERMOSTAT
PILOT-LIGHT ASSEMBLY
THERMOSTAT-SAFETY
BUSHING-STRAIN
CORD-ASSEMBLY NEMA 6-30P
BACK-ELEMENT HOUSING
CLIP-GROUND
PLATE-ELEMENT SUPPORT
BEARING, PIVOT
ANGLE-CAPILLARY
GASKET
ARM-PAWL
WIRE-SPACER
CLIP-CAPILLARY
BASKET, RIGHT
BASKET, LEFT
BOTTOM ASSEMBLY
SIGN-STICKER
LABEL-FRYER BURN WARNING
SCREW, #6-32 X 1/4 RHPH
WALL SIGN-FRYER WARNINGS
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
INCLUDE MODEL AND SERIAL NUMBER
PAGE
OF
ꢀ
1
Some items are included for illustrative purposes only and in certain instances may not be available.
is a registerd trademark of Toastmaster, A Middleby Company. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
29
37
30
33
32
38
28
27
31
36
18
22
23
26
39
21
35
25
19
24
17
20
16
14
15
6
13
9
40
41
10
12
7
8
11
5
3
4
2
1
MODEL: TMFE30
Electric Fryer
SK2442
Rev. A
3/15/12
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
March ꢀ5, 20ꢀ2, Rev. A
Model: TMFE30, Electric Fryers
Fig No
1
Part No
2R-Y5092
Qty
4
1
1
1
2
2
2
2
1
1
1
1
2
2
12
2
2
2
2
4
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
2
1
2
1
1
1
1
2
2
Description
BLACK PLASTIC LEG
2
E1-Y5083
E8-Z13102
2M-Z13098
2E-Y5166
E1-115714
2B-115774
2B-115775
2B-Y8847
2B-Y8846
2E-Y2849
E1-Y5084
E1-115719
E1-Y1669
2P-5737
PANEL, INSPECTION, SMALL
BOTTOM ASSEMBLY
3
4
FACEPLATE
5
SWITCH - 2 POLE 30 AMP
KETTLE ASSEMBLY, COMPLETE
6
7
BASKET - TWIN, LEFT HANGER (OPTIONAL)
BASKET - TWIN, RIGHT HANGER (OPTIONAL)
BASKET - HANGER LT
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
NI
NI
NI
NI
NI
NI
BASKET - HANGER RT
TERMINAL BLOCK
PANEL, INSPECTION
ELEMENT HANDLE ASSEMBLY
UPPER ELEMENT CLAMP
CLIP - CAPILLARY TUBE
ELEMENT 240V, 5750W
2N-Y5168
E1-Y1889
E1-Y1890
E1-7363
BRACE - ELEMENT (LONG)
BRACE - ELEMENT (SHORT)
CLAMP - THERMOSTAT BULB
GROMMET - CAPILLARY TUBE
KNOB - THERMOSTAT
2I-5659
2R-Z13100
E1-116314
E1-116313
2A-5401
SIGNAL LIGHT - POWER ON (WHITE)
SIGNAL LIGHT - HEATING (AMBER)
PIN - COTTER (3/4”)
E1-Y5108
2T-Z7208
2T-Y1668
2A-7435
ROD - CATCH RELEASE
THERMOSTAT
SAFETY THERMOSTAT
PIN - COTTER (3/8”)
2I-Y5097
E1-Y5286
E1-Y5109
2P-7969
GASKET - ELEMENT HOUSING
BACK - ELEMENT HOUSING
ROD - CATCH
SPRING
E1-Y5090
2I-Y5088
2K-Y5093
E1-515005
2I-Y5095
E1-Y5086
2M-Z7219
E1-Z1390
2C-Z4341
2M-Z8942
2M-Z8943
2M-Y2089
2M-Y5135
2P-Y3406
2P-Y3453
PIVOT BUSHING
GASKET - PIVOT
BUSHING - 1”
WIRE HOUSING ASSEMBLY
GASKET - WIRE HOUSING
BACK - WIRE HOUSING
SIGN - LABEL, TEMP SETTINGS
SWITCH GUARD
SCREW, #6-32 X 1/4 RHPH
LABEL-FRYER BURN WARNING
SIGN-FRYER WARNINGS
LABEL-RESET
LABEL WIRING DIAGRAM
WIRE SPACER,THERMOSTAT BULB - .302 DIA.
WIRE SPACER, SAFTEY THERMO BULB - .350 DIA.
is a registerd trademark of Toastmaster, A Middleby Company. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE 1
ELEMENT HOUSING ASSEMBLY
NOTES:
B
1. LOOKING TOWARDS REAR
OF ELEMENT CONTROL ASSEMBLY.
2. LOOKING TOWARDS REAR
OF THE SWITCH.
2 WHITE
1 BLACK
A
THERMOSTAT
B
C
D
E
F
PILOT LIGHT
A
HEATING ELEMENT
WIRE NUT (2)
C
HIGH LIMIT THERMOSTAT
ON-OFF SWITCH (2 POLE)
NOTE: ALL POWER WIRES ARE #12 GAUGE
NEMA PLUG NUMBER 6-30P
E
CORD:12AWG/3,SJTO 105 C,250V
CORDSET ASSY# E3-301044
4 BLACK
3 WHITE
RATED
WATTAGE
4130
SINGLE
PHASE
208V
NOMINAL
AMPS
19.9
NOTE 2
5500
240V
22.9
F
D
BLK
5 BLACK
WHT
6 BLACK
GRN
MODEL: TMFE15
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
SK1724-1
Rev C
9/1/2009
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
RIGHT HAND CONTROL
HOUSING ASSEMBLY
530015
LEFT HAND CONTROL
HOUSING ASSEMBLY
530016
C
C
E
E
10
10
9
9
B
B
A
A
D
D
7
8
5
6
THERMOSTAT
HIGH LIMIT
A
F
F
B
C
D
E
HEATING LIGHT
POWER ON LIGHT
HEATING ELEMENT
2-POLE SWITCH
G
1
3
4
F
2
G
POWER SUPPLY BLOCK
FOR SUPPLY CONNECTION USE COPPER WIRE RATED AT LEAST 90°C.
MODEL 530TE
MODEL 530T / TMFE30
240V 1 PH.
240V 1 PH.
208V 1 PH.
6910
208V 1 PH.
8638
11500
47.9
#6
WATTS
AMPS
9200
38.3
#8
33.2
#8
41.5
#8
SUPPLY MIN AWG
2M-Y5135, Rev D
MODEL: TMFE30
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Statement
This warranty is effective on all Toastmaster equipment sold on or after July 1, 2006, and supersedes all
previous warranties.
Toastmaster warrants equipment that it manufactures to be free from defects in material and
workmanship. Toastmaster’s obligation is limited to repairing or replacing, at Toastmaster’s option, without
cost to the customer, any part found to be defective, as well as any labor or material expense required to
replace the part.
Length of Warranty
This warranty is effective for a period of 12 months from the date the equipment is placed in service.
Models that are considered portable should be taken to the closest Toastmaster service agency,
transportation prepaid.
Exceptions
•
•
This warranty is valid only for the original end user owner/operator of the equipment.
This warranty does not apply to normal maintenance functions, including (but not limited to)
improper operation, installation or the use of an improper utility supply.
•
•
•
This warranty is valid only if the equipment is used in a commercial setting. The equipment
is designed and constructed for commercial use by trained professionals only. Any use of the
equipment in private or domestic applications immediately voids this warranty.
This warranty does not apply to any parts, labor and material expenses for service that is not
pre-approved and performed by a Toastmaster authorized service agent. Any such service
immediately voids this warranty.
This warranty does not apply to any parts, labor and material expenses associated with the
installation of parts that are not factory-approved for use in the equipment. Any use of such
parts immediately voids this warranty.
•
•
This warranty is not valid if terms of payment have not been met.
Portable units is a unit thats designed to sit on a countertop, has a powercord & is less than
50lbs installed.
Toastmaster reserves the right to change the design and specifications of this equipment or any related
documentation at any time. The end user is not entitled to upgrades resulting from these changes.
This warranty is exclusive and supersedes all other warranties for the equipment, both expressed and
implied. There are no implied warranties of merchantability or of fitness for a particular purpose.
The foregoing is Toastmaster’s sole and exclusive obligation and the end user sole and exclusive remedy
for any action including breach of contract or negligence. In no event shall Toastmaster be liable for a sum
in excess of the purchase price of the equipment, or for any prospective or lost profits of the end user.
is a registerd trademark of Toastmaster, A Middleby Company. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|