ALP-600
R
UHF Log Periodic Antenna
TELEX COMMUNICATIONS, INC.
8601 East Cornhusker Highway, P.O. Box 5579, Lincoln NE 68505
Order No. 878896
801542
INSTRUCTION MANUAL
General Description
Log Periodic Antennas are also directional and
will have the best reception when pointed at the
transmitter. This yields the benefit of less interfer-
ence from unwanted signals coming from the back
or side of the antenna.
The ALP-600 is a broadband bi-directional log pe-
riodic antenna. It will receive any frequency from
520 to760MHz. The “gain” of this antenna enables
it to receive signals from a greater distance than a
typical “whip” type antenna.
SPECIFICATIONS
(average)
Gain..................................................................................................................1.6 dBd
1/2 Power Beam Width .........................................................................................120°
Front-to-Back Ratio...........................................................................................19.4 dB
SWR.......................................................................................................................1.5:1
Input Impedance ................................................................................................50 ohm
Input Connector ....................................................................................................TNC
Size............................................................................12" (304.8mm) x 17" (431.8mm)
Antenna Placement
The ALP-600 should be placed in a position that
has a clear view of the transmitter(s) for best re-
sults. Obstructions such as walls, ceilings, and
metal objects will reduce range and performance.
Antenna Mounting
T
elex
The ALP-600 is supplied with hardware for tubular
clamping. It should always be mounted vertically
with the ground and perpendicular to the transmit-
ter(s), See Figure 1.
TR-600
Figure 1
-1-
Download from Www.Somanuals.com. All Manuals Search And Download.
ALP-600
Antenna Pattern
Figure 4
Typical ALP-600 UHF Bi-Directional Antenna Pattern
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
Clamps
Clamps are provided for mounting the ALP-600
onto the antenna mast. Attach the clamps with the
hardware supplied. See Figure 5.
Do not clamp the antenna to horizontal metal ob-
jects that extend past the clamp. This will detune
the antenna and cause loss of range and perfor-
mance.
Figure 5
Clamps
Coax Cable
For best results, it is recommended that cable losses
be kept under 4 dB. (Every 3 dB of signal loss re-
sults in a system operating distance reduction of
25%).
A 10 ft coax cable (PN 690419) is included with
the ALP-600.
ACCESSORIES
Telex
Special Low Loss Antenna Cables
with TNC Connects
Antenna Mast
Four sections, clear anodized aluminum
mast with extended length of 90 1/4".
Order No. 878897-1
Length
Part No.
690419
71151-029
71151-050
71151-075
71151-100
10 Ft. (3 meters)
25 Ft. (7.6 meters)
50 Ft. (15 meters)
75 Ft. (23 meters)
100 Ft. (30 meters)
PRINTED IN U.S.A.
Copyright© 1997 by Telex
TELEX COMMUNICATIONS, INC.
All rights reserved.
July 1997
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
|