Technicolor Thomson TV DVD Combo TV DVD Combo User Manual

TV_DVD_LCD_en 27/06/02 14:30 Page 1  
Contents  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Remote control:TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Remote control: other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Initial set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Manual set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
EN  
General operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
TV  
DVD  
Switching on and off  
Volume  
Displaying status information  
Accessing channels  
Accessing AV programmes  
Setting the time – List of programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Time  
List of programmes  
Virtual Dolby Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Picture and preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Picture  
Preferences  
Other settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Customizing  
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
DVD menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
DVD remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Playback – types of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Playback modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Display and sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Preferred languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Info menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-22  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 3  
Switching on  
Follow the instructions on this page on how to switch on yourTV/DVD set and the remote control before going on to  
the channel set-up procedure described on page 6.  
1 Install two LR06 or AA batteries in the remote control (see below).  
220 - 240V  
~ 50 Hz  
2 Plug the AC adapter jack into the DC IN socket at the back of your  
Power supply unit  
LCDTV/DVD.  
3
It is used to supply power to yourTV/DVD which must only be powered with direct current.  
3 Plug one end of the power cord to the adapter and the other end to a  
2
mains socket (220 – 240V / 50Hz).  
4 Connect the outside aerial or cable network to the g socket at the  
back of theTV/DVD set.  
EN  
The aerial socket (75 Ohms -VHF / UHF / cable) located at the back of theTV/DVD set  
can be used for connecting an external aerial or other equipment fitted with a modulator  
(video recorder, satellite receiver, etc.).  
We recommend that you do not connect other equipment (VCR, decoder, etc.) to  
yourTV/DVD set to begin with, so as not to complicate the set-up procedure with this  
additional equipment. Connect them when you have finished setting up the channels by  
referring to page 23 of the manual.  
TV  
DVD  
NexTView-Link video recorder (see diagram at the end of this manual, on the inside  
of the cover).  
4
If you have a NexTView-Link video recorder, you must connect it to the AV1 socket of  
theTV/DVD set using a SCART cable (21 pins, all wired) before proceeding to the initial  
set-up described on page 6.  
5 Switch theTV/DVD on by pressing the B button of the keyboard.  
The first time you switch on theTV/DVD, the language selection menu appears.  
6 Now go to page 6 for information on the Initial set-up, or page 7 for  
information on how to update your channels if the channels have already  
been set up (if you have moved house, for instance).  
Information about connecting other equipment to the AV (Audio-Video) sockets is given  
on page 23.  
Before referring to it, complete the initial channel set-up procedure on the next page to  
avoid any problems with equipment selection.  
5
More info  
INSERTINGTHE BATTERIES  
UK SOCKET  
Install two LR06 or AA batteries in the remote control as indicated below.  
Equipment for the UK is supplied with a mains cable fitted with a moulded  
plug.  
PRECAUTIONS ON USING BATTERIES  
The plug contains safety components and must not be replaced by one  
sold by general retailers.It is fitted with a fuse that protects your television.  
If your set has stopped working,the fuse may have blown.If it has,replace  
it with an identical ASTA certified or BSI (BS1362) 5-amp fuse.  
-
-
-
-
-
Only use the battery types specified.  
Make sure you use the correct polarity.  
Do not mix new and used batteries.  
Do not use rechargeable batteries.  
Do not expose batteries to excessive heat, throw them on the fire,  
recharge them or try to open them, as this could cause them to leak  
or explode.  
Please respect the environment and the relevant regulations.  
Before you dispose of batteries or accumulators, ask your  
dealer whether they require special recycling and if he is able  
take them back.  
-
Remove the batteries from the remote control if you are not using it  
for a long period of time (several weeks).  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 4  
Remote control : TV  
Most of yourTV/DVD’s functions are available via the menus that appear on the screen.The remote control supplied  
with your set can be used to navigate through the menus and to configure all the general settings.  
CONTROL KEYS  
To switch on and off yourTV/DVD.  
To control yourTV/DVD set, switch the selector  
to the tv+dvd position.  
To control other equipment, see page 5.  
To switch fromTV to DVD mode or  
from DVD toTV mode.  
Programmes  
To change channels.  
To select a channel by entering its number.  
For two-digits channels,press 0/- - key first (ex. 12,  
type 012).  
Audiovisual programmes  
To select an appliance connected to an AV socket.  
The colour keys  
Red:call the sound and picture  
preset menu.  
The colour keys  
are also used  
for teletext  
Green: display the list of  
programmes.  
Yellow: useful status  
operation.  
information.  
Purple: displayTeletext.  
Sound  
To control the volume.  
Mute and re-establish the sound.  
NAVIGATION KEYS  
The Left and Right buttons are used for  
adjusting settings, changing values,  
switching certain functions on and off and  
for using the zoom function.  
Pressing tv menu key display the  
SUMMARY.  
Press the ok button to confirm a  
selection.  
The Up and Down buttons are  
used to select options from the  
menus.  
Press the exit return button to close  
menus.  
Important: If the batteries of your remote control are flat, you can use the keys on the front of the unit : they have the  
same function as those of the remote control.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 5  
Remote control : other equipment  
The remote control supplied with your TV/DVD may vary depending on the model you have chosen. Same remote  
controls can be used for other equipment, such as video recorders, DVD players, satellite receivers or Hi-fi systems.  
This page provides information concerning the remote control’s use with these other types of equipment.  
Video recorder  
Satellite Receiver  
Hi-fi system  
Set the switch to vcr  
Set the switch to sat  
Set the switch to hifi  
Standby / On  
Standby / On  
Standby / On  
To display the menu  
To display the menu  
EN  
Vertical scrolling in menus  
Vertical scrolling in menus  
Horizontal scrolling in menus  
TV  
DVD  
Horizontal scrolling in menus  
Confirmation an action  
Exit the menus  
Confirmation an action  
Exit the menus  
Direct access to the  
programmes or enter the  
numeric values  
Direct access to the  
programmes or enter the  
numeric values  
To select a radio station using  
its number  
To change channels  
Select the AV input.  
To change channels  
To change stations  
To switch the sound off and  
back again  
To switch the sound off and  
back again  
To set the volume level  
To set the volume level  
VCR functions  
PROGRAMMING THE REMOTE CONTROL  
1. Set the selector switch to the unit you witsh to use the remote control with.  
2. Hold the tv menu button down and enter one of the 3-digit codes corresponding to the make of your unit (the code list  
can be found at the end of this manual).  
3. Release the tv menu botton.  
4. Set your unit (vcr,DVD, HiFi,etc) in standby mode by pressing the B button on the remote control. If this does not work,  
try another code.  
Depending on the age or type of some products,certain functions may not be available.Certain codes may cover more functions  
than others.Test the functions that you can control and maybe try other codes.When you change the batteries in the remote  
control unit, remember to reprogram it. Note the code or codes which are best suited here.  
VCR  
SAT  
HIFI  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 6  
Initial set-up  
The initial set-up consists in carrying out all the necessary settings to search and store all the channels you can  
receive in your area. Make sure that theTV/DVD is switched on and follow steps 1 to 6 on this page.  
When you first switch theTV/DVD on, the language selection menu appears.  
If this does not happen, refer to Manual channel set-up section to find out how to carry out an Autosearch.  
1 Choose which language you want the menus to appear in using the  
or  
button.  
2 Confirm with ok.A list of countries appears, over two pages.  
3 Select the relevant country using the  
or button.  
This is the country you are in, or the country whose channels you want to receive if you  
live near its borders.  
4 Confirm with ok.A welcoming message appears.  
5 Start automatic set-up by pressing ok.  
The menu that appears tells you how set-up is progressing.Wait for the end of set-up  
message before leaving the menu, otherwise the channels will not all be memorised.  
Depending on the number of channels you want to receive, auto set-up can take up to 10  
minutes.  
To order, name and rename channels or delete channels stored twice, press  
ok and go to step 6.  
OR  
If you do not want to reorganise the channels, press exit to close the  
menu.  
6 The PROGRAMME ORGANISATION menu allows you to name  
channels, change the sequence of channels and delete channels stored  
twice or with poor reception quality.  
Follow the instructions on the screen.Use aTV programme magazine to identify the various  
channels.  
Organising your channels:  
Select the Select program. line.  
Look for the channel that you want to assign the number 1 to with the  
pr + and pr - or and buttons using the channel logos to help you.The  
number already assigned appears on the Select program. line.  
Select the Swap with PR line, key in 01 and press ok.The channel goes  
to first position: the two channels are swapped.  
Repeat this procedure for the other channels.  
Deleting a channel:  
Select the Select program.line and scroll through the channels using the  
pr + and pr - or  
and  
buttons.  
When you come to a channel to be deleted,select Delete program.,and  
press ok.  
Confirm by pressing again ok button.  
Changing the name:  
Select the Change pr. name line and choose the character to be altered  
with the  
and  
buttons.  
Scroll through the alphabet using the 1 and 2 buttons.  
The name will be changed when you change line or leave the menu.  
When you have finished, press exit to close the menu.  
You may subsequently return to this menu by selecting the Programme Organisation  
line in the INSTALLATION SUMMARY menu.  
More info  
Missing channels: channels are searched for according to the  
Decoder: if you have connected a decoder to the AV1  
country selected, refer to the Manual channel set-up chapter for  
socket, after the initial set-up you should display the MANUAL  
information on how to set up channels that have not been found.  
INSTALLATION menu and confirm the Decoder option.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 7  
Manual set-up  
The information provided on this page is useful if you find that some channels have not been stored during the initial  
set-up or automatic update processes.This can happen if you are setting up cable network channels.  
Setting up channels manually requires every setting for every channel to be entered, one at a time.  
Display the OVERVIEW by pressing tv menu button, select Installation line  
and confirm with ok.The INSTALLATION OVERVIEW is displayed. Select  
the Manual installation line. Confirm with ok to display the menu.  
Define all the settings in turn for each channel to be stored. Follow the instructions appearing  
at the bottom of the screen.  
1
2
3
Standard: select the standard for your country.  
Standard are the following: France for France and Luxembourg, DKK’ for Eastern Europe  
and the Middle East, UK for the United Kingdom and Eire, Euro BG forWestern Europe.  
Reception: select the reception type (terrestrial aerial or cable network).  
Some cable networks use the same frequencies as terrestrial channels. In this case case,  
select Aerial instead of Cable.  
EN  
TV  
DVD  
Autosearch: key in the channel number or start a search with the  
or  
keys.  
YourTV/DVD will stop at the first channel found. If you want to store the  
corresponding channel, select the Store on PR number line.  
Otherwise, continue the search using the  
or  
button.  
4
5
6
Fine tuning: if the picture is not sharp enough, try to improve it with the  
or button.  
Store on PR number: to confirm your settings, key in the number that  
you want to assign to the channel (e.g. 01 for BBC1). Store it with ok.  
Name: if you want enter a name, select the character to be changed with  
the  
Scroll through the alphabet with the 1 and 2 buttons. Change the  
character with the or button and repeat stage 5 above.  
or  
button.  
7
Decoder: if the channel is encrypted and if you want to connect a  
decoder to the AV1 socket (see page 23), tick the box with the  
button and repeat stage 5 above.  
or  
When you have finalised all the settings for a particular station, select the  
Store on Pr number line to store them.Then go on to the next channel.  
Leave the menu with exit.  
More info  
Subsequent set-ups: display the INSTALLATION OVERVIEW and  
select Auto update or Auto installation as appropriate.  
Then follow the instructions at the bottom of the screen.  
Auto installation is used for setting up channels after the initial set-  
up (e.g. after moving house).  
This process deletes all channels previously stored.To set up a new  
channel, it is better to use Auto update or Manual installation.  
Auto update allows you to set up channels just launched or any  
channels that are missing or wrongly set up.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 8  
General operation  
This page describe the basic features of yourTV/DVD with LCD screen.  
Switching theTV/DVD set on and off  
To switch theTV/DVD set on, press the B button on the keyboard.When the  
set is on, the indicator on the front is green.  
Standby mode: press the B button on the keyboard or on the remote  
control.When theTV/DVD set is in standby mode, the indicator on the front is  
red.  
TheTV/DVD set remains powered up, but with low energy consumption.  
To switch on from standby, you can:  
- press any numeric button on the remote control,  
- press the ok or pr+/pr-,  
- press the av.  
Automatic switch off: the set automatically switch in standby mode 5 minutes  
after the station being watched stop broadcasting.  
Volume  
Volume control: use the buttons to increase and decrease the volume.  
Sound mute (  
): press this button to temporarily mute the sound.  
Press again to restore it.  
Displaying status information  
Press the yellow info button on the remote control to display the number and  
name of the channel you are watching, the time, and the type of sound.  
The number and name of the channel are displayed whenever you turn on the  
TV/DVD set or change channels.  
The channel number will be displayed permanently if you have activated the function in the  
Preferences menu (cf. page 11).  
Accessing programmes  
- Using the numeric buttons: for programmes 1 to 9, press the corresponding  
button. For two-digit programmes, first press the 0/-- button, then the  
programme number (e.g. type 012 for channel 12).  
- Using the pr+/pr- buttons:scan through the programmes.You cannot accessAV  
programmes but these are accessible using the pr+/pr- buttons on theTV/DVD set.  
- Using the list of programmes: see page 9.  
Accessing AV programmes  
Press the av button to display the last selected AV programme, press again to  
access the other AV programmes.  
You can also access AV programmes using the list of programmes (see page 9).  
More info  
Child lock  
Picture and sound preset  
You can disable theTV/DVD buttons so that your children cannot switch  
the television on without your permission.The TV/DVD set can then only  
be switched on using the remote control.This function is activated:  
• after the sleep timer has been set.  
Display the menu using the red button.Select the desired option using the  
/
buttons and adjust as required.  
• if a wake-up time has been set (TIME menu).  
• if you put theTV/DVD into Standby mode by pressing the standby button  
B
on the remote control for 5 seconds.  
When theTV/DVD set is in standby and locked, the indicator on the front  
panel flashes red.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 9  
Setting the time – List of programmes  
The information on this page explains how to use theTime menu functions (Setting the time, Sleep timer,Wake-up),  
as well as those for the LIST of programmes menu.  
Time  
Display the OVERVIEW menu using the tv menu button and select the  
Time option. Press ok to confirm.The TIME menu is displayed.  
Return: returns to the OVERVIEW menu.  
Sleep timer: set an automatic shut-off time (0 to 4 hours, with 5 minute  
steps) using the  
/
buttons.  
Set 00:00 to cancel this function.  
When the sleep timer is on, a message appears one minute before the  
TV/DVD set goes into standby mode. Press any button on the keyboard or  
on the remote control to cancel standby mode.  
EN  
TV  
DVD  
Time reference on programme: select a programme using the  
/
or pr + / pr - buttons, or enter a programme number using the numeric  
buttons.This programme will be used to provide an accurate time and date,  
and must have a teletext service.  
Time (and Date): if the time is not provided byTeletext, theWake-up  
functions are not available and a message appears requesting you to change  
the reference channel or to enter the time manually.To do this, choose the  
relevant option and enter four digits using the remote control numeric  
buttons.  
Once you have set the time, you can use theWake-up timer feature.  
Time entered manually will be lost in case of a power cut.You must then re-  
enter it.  
Wake up timer: press ok to check the box in order to enable this  
function and display the menu options.  
Wake up time: enter the wake-up time using the numeric buttons.  
Programme number: use the buttons  
/
or numeric buttons (2digits)  
to enter the number of the programme you want to wake you up.  
Daily: press ok to check the box if you want a daily wake-up call.  
Press exit to close the menu.  
Put theTV/DVD set into standby mode using the B button on the remote  
control.The indicator on the front panel starts flashing slowly.TheTV/DVD set  
will automatically switch on at the programmed time and for 1 hour duration if  
you do not interrupt it by using the remote control.  
List of programmes  
Press the list (green) button on the remote control to display the LIST of  
programmes. It has a maximum of 11 pages and shows the name and the  
number of each programme.The last page lists units connected to the AV  
sockets.  
It opens on the page where the programme you are currently watching is  
listed.To watch one of the programmes on the displayed page, use the pr + /  
pr - or  
/
buttons and press ok. You can also enter the last digit of the  
programme number (for example, 5 for 25).  
You can scroll through the pages using the  
/
buttons.  
Leave the menu with exit.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 27/06/02 10:58 Page 10  
Virtual Dolby Surround  
DolbyVirtual is a technology certified Dolby Laboratories,that creates a virtualized surround sound experience from  
two speakers.The Virtual Dolby Surround function in works multi-channel and Dolby Surround encoded audio  
sources.Virtual Dolby Surround retains all of the original multichannel audio information and provides the listener  
with the sensation of being surrounded by additional speakers.  
Display the OVERVIEW by pressing tv menu button.  
Select the Sound line. Confirm with ok.  
The SOUND menu appears with the following options.  
Return: returns to the OVERVIEW menu.  
Sound type: select the relevant sound type.  
The available options depend on the programme you are watching. Refer to the table opposite  
to find out about the various options available according to the type of sound transmitted by the  
channel.  
Sound Mode: select a mode.The available modes depend on the sound type  
selected.  
See «More info» below.  
Magic and Dolby Virtual modes are only available for stereo audio sources.  
Surround effect: adjust the surround effect using the bargraph.  
This line only appears if you have selected Dolby Virtual under the Sound mode line.  
Balance L/R: balance the sound between the Left and Right speakers.  
Sound preset: use the  
or  
button to select the appropriate setting  
(Standard, Film, Voice, Music, Flat, Personal) for the programme you are  
watching.  
The Personal setting stores your graphic equalizer settings.  
Graphic equalizer: select each band in turn using the  
make the necessary adjustments.  
/
buttons and  
Sound type  
BROADCAST  
Mono  
CHOICE  
Automatic - Mono  
Mono - Stereo  
Once you have set the equalizer,the Sound Preset option goes automatically  
to Personal.Your settings are stored as the new personal settings.  
Stereo  
Dual  
Sound 1 - Sound 2  
Sound 1 - Sound 2 - Sound 3  
Stereo - Sound 1 - Sound 2  
NICAM - 3  
AV  
Leave the menu with exit.  
Manufactured under licence from Dolby Laboratories.  
Dolby”, and the double D  
symbol are trademarks of Dolby Laboratories.  
More info  
Sound Mode  
SOUNDTYPE  
MODES  
Mono  
Stereo  
Normal -Wide  
Normal - Magic  
DolbyVirtual  
Normal -Wide  
Normal -Wide  
Nicam  
The NICAM process consists of sending digital stereo sound  
comparable to that from an audio CD via a land based transmitter  
in addition to its usual mono equivalent. So by means of the NICAM  
process, you can get digital sound with the quality of a compact disc.  
Sound 1  
Sound 2  
Explanations  
Normal  
Wide  
Magic  
original sound (mono or stereo)  
stereo effect for mono sound  
accentuated stereo effect +  
surround effect  
DolbyVirtual  
Virtual Dolby Surround.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 11  
Picture and Preferences  
The information on this page allows you:  
- to adjust yourTV/DVD’s picture to suit better your preference, the type of programme you are watching and the  
ambient lighting.  
- to set preferences for some features of yourTV/DVD with LCD screen.  
Picture  
Display the OVERVIEW with the tv menu button. Select Picture line and  
press ok to display PICTURE menu.  
Return: returns to the OVERVIEW menu.  
Picture preset: use the  
or  
button to select the appropriate setting  
(Standard, Film, Studio, Sport, Personal) for the programme you are  
watching.  
Personal stores all your preferred settings.  
EN  
Brightness, Colour, Contrast and Sharpness: adjust the picture to your  
liking.  
These settings are automatically stored under Personal under the Picture preset option.  
TV  
DVD  
Tone controls colour temperature (Warm, Neutral or Cold).  
Leave the menu with exit.  
Preferences  
Display the OVERVIEW with the tv menu button. Select Preferences line.  
Confirm with ok.  
The PREFERENCES menu appears with the following options.  
Return: return to the OVERVIEW menu.  
Show PR. number: tick the box to permanently display the number of the  
channel you are watching.  
AV1 video input: using the  
or  
button, state the type of video signal  
transmitted by the equipment connected to AV1.  
Format control: choose the format for the on-screen picture.  
Auto: theTV/DVD (16/9) adapts to the broadcast picture format if the  
broadcaster or equipment connected via a Euro-AV (scart) socket provides a  
control signal.  
16/9 or 4/3: choose the format if the picture is not automatically adapted.  
The format returns to Auto if you change channel or switch off theTV/DVD set.  
Ext. amplifier: if you connected an amplifier to the cinch sockets located  
on the back of your set, tick the box.  
The left and right speakers of theTV/DVD set are thereafter disconnected and you may use  
the speakers connected to the amplifier.  
If you do not use the external amplifier, deactivate the External amplifier function: your  
TV/DVD set would otherwise be muted.  
Leave the menu with exit.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 12  
Other settings  
The explanations given on this page will enable you to access the Personal Settings menu.  
Customizing  
Display the OVERVIEW by pressing tv menu button, select Installation  
line and confirm with ok.  
The INSTALLATION OVERVIEW is displayed.  
Select the Personal settings line. Confirm with ok to display the menu.  
Return: returns to INSTALLATION OVERVIEW menu.  
Menu language: select your preferred language for menus.  
Country: the choice of country is important for the correct display of  
Teletext screens in the corresponding language.  
Auto volume level: tick the box if you want to keep the same sound level  
on all channels.  
Leave the menu with exit.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 13  
Teletext  
Used in many countries under various names (TOP Text, Fastext, FLOF text, Videotext),Teletext is a free service  
offered by television channels.The service consists of information database (weather, sports results, news, games,  
etc.) available at all times.  
Press the text button to display theTeletext Index page (page  
100) or the last called page. A message will tell you if there  
is noTeletext on the channel that you are watching.  
Favourite pages:To memorise 4 of your favourite pages,  
use the keys and select ♥ ♥ ♥ ♥ in the grey window  
on the bottom left of the page.  
/
Press OK to tick the box.  
Type in the number of the page to be saved and as soon as  
the page is displayed, press STOP on the remote control to  
save it.  
Display a page:key in the 3 figures of its page number.After  
a moment the page appears.Use  
/
or pr +/pr - buttons  
The number memorised is displayed at the bottom of the page.  
You can memorise up to 4 page numbers.To return to these pages in the  
future, just press the colour-coded key corresponding to the page number.  
If you change channel, you need to select ♥ ♥ ♥ ♥ again in the grey  
window at the bottom of the screen and then press twice on the OK key  
to call up the numbers of the pages saved.  
to display following or previous pages.  
The last line of the teletext page can be used in 2 ways:either  
in "Function" mode or in "Link" mode.  
To go from one mode to the other, press the tv menu key.  
EN  
Character set: if the characters on the teletex page are  
TV  
DVD  
faulty, you can select another set of characters.  
Function Mode  
Using the  
/
keys, select ABCDE in the grey window  
on the bottom left of the page.  
Display the Index page: using  
/
buttons select 100  
Press ok to check or uncheck the box.  
in the bottom left window of the page and confirm with ok.  
Link Mode  
Rolling pages: some types of information may take several  
pages.  
The display of the last line differs according to the type of teletext received.  
YourTV automatically detects the type of teletext received.  
If however the reception conditions do not allow such automatic detection,  
you can manually carry out this selection.  
They appear on the screen as become available.  
Using  
/
buttons select STOP in the bottom left  
window of the page and confirm with ok to stop paging.  
To resume paging, press ok.  
Using the  
/
keys, display FORCE AUTO in the grey window at the  
bottom left of the page.  
Then press OK to select FORCE FASTEXT or FORCETOP depending on  
the case.  
Hidden message: to reveal a hidden answer (games), using  
/
buttons select ? ? ? in the bottom left window of the  
Direct access: the yellow and blue buttons allow direct  
access to the pages whose numbers are displayed in yellow  
and blue at the bottom of the screen.  
page and press ok.  
Press ok, to hide it again.  
Zoom: using  
/
buttons select ZOOM in the bottom  
Fastext: Fastext contains 4 colour subject headings which  
appear at the bottom of the screen. Select the desired page  
by the colour buttons on remote control.  
left window of the page and press ok,once to enlarge the top  
of the screen, twice to enlarge the bottom of the screen, or  
three times to restore the original size.  
After you have made your choice,additional subject headings may appear.  
TOPtext: TOP text contains pages arranged in subject  
headings with articles.  
Mixed screen: to overlay a teletext page onto the channel  
Press blue button to select the heading displayed at the  
bottom of the page.  
The following heading is then displayed in blue at the bottom of the page.  
Press yellow button to select the article displayed at the  
bottom of the page.  
picture, using  
window of the page and confirm with ok.  
One further press on ok returns to normal display.  
/
buttons select MIX in the bottom left  
Sub-page: to access a sub-page directly, using  
/
The following article is then displayed in blue at the bottom of the page.  
buttons select - - - - in the bottom left window of the page  
and confirm with ok. Key in the sub-page’s 4-digit number  
(e.g. : 0003).  
Additional functions  
With some channels, it may take several minutes to display the sub-page  
on the screen.  
Some channels transmit via teletext subtitles of their  
programmes, as well as the latest newsletters.  
The numbers of appropriate pages are to be found in the  
Teletext table of contents.  
Once found, the subtitles or a newsletter are overlaid onto  
the picture.The reference line will vanish in seconds.  
To recall it up, press text button.  
Some channels transmit warming pages which may be displayed in a  
desired time.  
Example: dial 1530 as a sub-page number for 15:30, then press exit.  
The unit should be on,tuned at the station transmitting the warming page.  
To leaveTeletext, press exit.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 14  
DVD menus  
This page shows you the different menus available in DVD mode. If theTV/DVD set is in stand-by mode, switch it on  
by pressing the PLAY button of the remote control. If the TV/DVD set is in TV mode, press the tv/dvd button of the  
remote control or keyboard.The main menu provides access to all the other menus described in the following pages.  
Main menu  
This menu allows you to define the player’s settings (languages for menus and  
disc, sound outputs, display modes), to choose the playback mode and to lock  
the player.  
If you have not loaded any disc, the menu appears automatically.  
If a disc is being read, press the STOP button.  
To select a menu: using  
Press return to come back to the previous menu.  
button select a menu, then press ok. Sub-menus appear.  
/
Disc Contents menu  
To access this menu, press the PLAY button to put the disc in playback, then  
press the title button.  
This menu is only available if the disc contains several titles.  
Press once more the title button to close the menu.  
Info menu  
The info menu allows you, during playback, to display information about the  
disc and to access some special play functions.  
The info menu is deactivated when the disc is stopped.  
To access them, the player must be in play mode.  
Press on the remote control info (yellow) button to display all the info.  
Use the  
/
buttons to navigate between functions.  
Press once more on the info button to close the menu.  
Press a direct access key of the remote control (  
information.  
,
,
) to access the corresponding  
Disc options menu  
To access this menu, press the PLAY button to play the disc, then press  
the disc menu button.  
The “options” menu of the disc is only available if the disc contains a menu.  
Press once more on the disc menu button to close the menu.  
Appearance and content of the menus may vary according to the discs (follow  
the instructions on the screen).  
TV Menu  
You may access certainTV part menus while remaining in DVD mode.  
Press the red buton of the remote control to access the sound and picture  
preset menu of theTV part.  
By pressing the tv menu button of the remote control, you may access the  
picture and sound menus of theTV part.  
Screen saver:Your LCDTV/DVD is equipped with a screen saver.This screen protection device  
starts up automatically:  
- if a menu is displayed for more than 5 minutes without any key on the remote control or  
keypad being pressed.  
- if the device remains on pause for more than 5 minutes without any key on the remote control  
or keypad being pressed.  
Press any key on the remote control or keypad to exit the screen saver mode.  
More info  
PLAYBACK CONTROL (PBC)  
SomeVideo CDs (version 2.0, with “PBC”: Play Back Control,  
written on the disc or on the sleeve) offer scenes and information  
which may be interactively selected through an on-screen menu.This menu  
appears once the disc has been loaded (or after having  
pressed the PLAY or disc menu).  
To select one of the menu elements, enter its number with the digit  
buttons of the remote control, then press ok to access it.  
The x symbol appears when a function you request is not  
available.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 15  
Remote control : DVD functions  
This page only describes the remote control’s DVD functions. Refer to page 4 for a description of theTV functions  
and page 5 for a description of how to use the remote control with other equipment.  
The keypad buttons located on the front of theTV/DVD have similar functions to those on the remote control.  
NAVIGATION BUTTONS  
THE OTHER BUTTONS  
If the set is in TV mode, press the  
tv/dvd button.  
To put your TV/DVD set in stand-by.  
To control yourTV/DVD set, switch to  
the tv+dvd position.  
MAIN MENU  
To control other devices, see page 5.  
These buttons allow you:  
- to choose a menu,  
- to increase or decrease a  
value,  
To switch fromTV to DVD mode or  
from DVD toTV mode.  
- to select an option.  
DVD PLAYBACK  
EN  
Use these buttons to access a menu.  
To confirm a selection.  
To skip chapters (DVD), tracks  
(Audio CD), or indices (Video CD).  
TV  
DVD  
PLAY: to start playback.  
To access theTV-part menu.  
REV / FWD: for fast forward or rewind  
during playback.To modify the speed of a  
video disc, press this button several  
times.  
To return to the previous menu.  
STOP: to stop playing a disc (to stop  
it completely and restart from the  
beginning, press twice).  
PLAYING A DISC  
To eject the disc, hold this key down  
for a few seconds.  
To access the INFO menus.  
PAUSE: for a pause, a still frame or an  
image by image selection.  
To select an option for an INFO  
menu option.  
SOUND  
To control the volume.  
To select an INFO menu option.  
To mute or cancel muting.  
To confirm a selection.  
DVD FUNCTIONS  
To access the audio function of  
the INFO menu.  
To access theTV sound and  
picture preset menu (INFO  
menus disappear).  
To access the disc "OPTION"  
menu (if it exists).  
To erase INFO menus.  
To access the Subtitle function of the  
INFO menu: you may then display or  
erase the subtitles.  
To resume playback 10 seconds back.  
To access the disc "CONTENT" menu.  
To access the angle function of the  
Important  
INFO menu (see page 22).  
If the batteries of your remote control are flat,you can use  
the keys on the front of the unit : they have the same  
function as those of the remote control.  
To access the Magnify function (see  
page 16).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 16  
Playback – types of discs  
Several playback modes are available.This page deals with simple playback mode. For the other playback modes,  
see the next page.This page also contains information about the various disc types accepted by the player.  
Standard playback  
1 Insert the disk as shown in the illustration on page 2, with the printed  
side facing you (for single-sided disks). After a few seconds, the disc title  
(or, by default, the type of disc) appears with the image and audio format  
information and its total duration (if this information is available).  
2 Press on the ok or PLAY button to start playback.  
Some discs automatically display a menu.You can choose an item using  
the  
/
/
/
buttons and press ok to confirm your selection.  
3 To stop playback, press the STOP button.  
This disc location is stored by the player in its memory. If you press the  
PLAY button once again, the disc will resume playing from where you  
left off. If you press the STOP button twice or if you remove the disc,  
this location will be deleted from the memory and the next time, the  
disc will start playing from the beginning.  
4 To eject the disc, press and hold the STOP button for a few seconds.  
Discs you can read  
Digital video discs  
12 cm and 8 cm, single or double-sided, single or dual layer. DVDs are high  
density optical discs on which high quality images and audio are recorded  
using digital signals.  
Audio CDs: 12 cm and 8 cm.  
Video CDs: 12 cm and 8 cm (with or without playback control).  
NTSC playback: in addition to PAL DVDs and video CDs, you can enjoy  
your favourite NTSC movies as well.  
Discs you cannot read  
Currently, the discs that you cannot play with this unit are the following:  
CD-I, CD-ROM, DVD-ROM, DVD-RAM, CDV, CD-G. DVD discs with a  
different regional code to that of your player.  
Do not try to play Photo CDs or CD-R.  
Regional code number: your DVD player has been designed to process  
regional management information that is stored on DVD discs.  
DVD discs that have different regional codes to that of your player cannot be  
played.The regional code for your player is 2. (Europe, the Middle East, South  
Africa, Japan).  
More info  
You can switch to TV mode by pressing the  
playback, without interrupting it.  
button during  
MAGNIFY function  
On some DVDs andVideo CDs, this function allows you to zoom in on a  
picture during playback at normal speed or during a pause. It can zoom  
in 1.5, 2 or 4 times the normal size for DVDs and twice the normal size  
forVideo CDs.  
If the player is locked and the disc has been assigned a rating limit, you  
must enter the password to play the disc (see page 18).  
When you press this button on the remote control, the centre of the  
picture is enlarged.When the picture is large enough, you can navigate  
The disc functions available (menus,access functions,dialogue and subtitle  
languages,camera angles,interactivity) may vary from one disc to another.  
Please check the instructions given on the disc.  
from one zone to the next using the  
discs).  
buttons (on some  
Some discs may have been pre-programmed to prevent the operation of  
certain functions, such as skipping chapters, still frame and repeat play.  
If you access the Info menu while the Magnify function is activated, the  
buttons will only work for this menu.  
The Magnify function will be cancelled if you use one of the following  
functions:modification of title or chapter, disc menu, stop (STOP button),  
access to a marker.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 17  
Playback modes  
To access the various playback modes, select the PLAY MODE menu using the  
confirm. Use the or button to select a mode, and press ok to confirm.  
/
buttons, and press ok to  
1 Standard Play is for normal disc playback.  
2 Random Play mode activates a random playback.  
This mode is only available for Audio CDs.  
3 In Program Play mode, playback occurs in the order specified in the  
list entered using the “Edit Program” screen.  
If there is no programmed list, this mode cannot be selected.  
This mode is only available for Audio CDs.  
4 The Edit Program screen allows you to specify the disc’s order of play.  
The list displayed can vary according to the type of disc.  
This menu is only available for Audio CDs.  
EN  
TV  
DVD  
CDs:When the screen is displayed, the Track field is selected.  
- Using  
or  
button, select a chapter.  
- Press ok to validate your selection.The page number will be displayed in the  
list followed by its duration.  
- Repeat the operation to add other tracks to the list.  
-When your list is complete, select it using the  
key and press PLAY to  
start the playback of your programme.  
The last line shows the total duration of the tracks chosen.  
To delete a track from the list: select the list using the  
key. Select the track using  
or  
. Press CLEAR to delete it.  
5 If Auto Play is selected, the player automatically starts playing as soon  
as a disc has been inserted.  
More info  
RANDOM PLAYBACK  
PLAYBACK ORDER  
This mode cannot be used for DVDs andVideo CDs.  
If the duration of track 1 exceeds the segment duration, this track will be  
divided into several parts. For example, if the track lasts 48 min., whereas  
the segment lasts 45 min., the track will be divided into two parts:1A (45  
min.) and 1B (3min.). Parts 1A and 1B will be placed into the segments  
as if they were different tracks.  
PROGRAM PLAY  
This mode is only available for Audio CDs.  
EDIT PROGRAM  
The EDIT PROG. screen is only available for Audio CDs.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:45 Page 18  
Locking your DVD player  
This function allows you to control access to discs with rating limits. Select the Lock option in the main menu and  
press ok to confirm.The LOCK menu appears with the following options:  
1 To activate the player lock, you must enter a password.  
2 Enter a four digits code with numeric buttons on your remote control,  
and press ok to confirm.  
If this is the first time you enter the code, confirmation will be requested. Enter the code  
once more and press ok to validate.  
Choose four numbers you will find easy to remember or note them down somewhere.  
3 To activate the lock, select Lock player line and tick the box.  
Uncheck the box to disable the lock.  
4 To change the password, select the Change Password line and press ok  
to confirm.  
CHANGE PASSWORD screen appears.  
Enter the new four digits code with numeric buttons on your remote  
control, and press ok to confirm.  
Confirmation is requested. Enter the code once more and press ok to validate.  
Some DVDs contain rating limit information.  
The Ratings Limits function allows you to control the type of discs or  
programmes that your family may watch. if some discs or sections  
exceed the rating limit you have set, they will not be played.  
5 Select the Ratings Limits line, then press ok to confirm and to display  
the RATING LIMITS screen.  
Using  
/
buttons, select the level and press ok to confirm.  
The Rating Limits function will only be operational when the lock is enabled.  
6 If you try to play a sequence whose rating limit is higher than the level  
you have set, a screen will inform you accordingly.  
If you still want to see the sequence, press ok.The Code screen is  
displayed. Enter the 4 digits of the code, if it is correct, the sequence will  
be played.  
7 All the unrated titles may have unrestricted access or require a  
password.  
Select UnratedTitles line and using  
or  
button, select “Free  
access” or “Password required ”.  
More info  
RATING LIMITS  
Encoding scenes according to rating limits is decided by the disc publisher.  
In Europe, only a few discs are assigned a rating limit.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 27/06/02 10:58 Page 19  
Display and Sound  
The DISPLAY menu enables you to choose the image format and the Info displays.  
The Digital output line enables you to choose the type of sound assigned to the digital output.To reproduce the  
sound of a movie theatre from the sound recorded on your Dolby Digital DVDs, connect a Dolby Digital  
amplifier/decoder to the optical digital audio output jack and select the sound type in the Digital output line.  
DISPLAY  
In the Main menu select the Display line using  
or  
button and  
confirm with ok.The DISPLAY menu is displayed.  
TV Image line allows you to choose the image format.  
The formats available are 4/3 Letterbox and 4/3 standard.  
Info Display line, allows to display some information on the screen.  
Using or button, tick the box.  
EN  
When the box is checked, the following information is displayed on screen if it has been  
TV  
DVD  
enabled: Viewing angle, Next chapter, Previous chapter, Play mode.  
AUDIO OUTPUT  
Select the Digital output line from the Main menu using  
or  
button then select the desired sound type.  
Considering the device you connect to the digital audio output jack, choose  
the type of sound that will be output by this jack.  
Make your selection according to the type of disc and the type of sound you  
want to output from the digital audio output jack and press ok to confirm.  
Digital output according to the chosen options:  
Digital output  
Disc format  
STOP  
Bitstream  
PCM  
PCM  
No sound  
No sound  
No sound  
PCM  
PCM  
PCM  
PCM  
Dolby Digital  
CD  
Dolby digital encoded  
PCM  
More info  
AUDIO FORMATS  
PCM  
Dolby Digital is a sound compression technique elaborated by Dolby  
Laboratories for digital audio multichannel signals.The Dolby Digital  
system supports any audio channel configuration, from stereo sound  
(2 channels) up to the digital “surround” sound 5.1.  
The linear PCM is a signal recording format used for CDs.  
CDs are recorded in 44.1kHz /16bits.  
DVDs are recorded in 48kHz / 16 bits, or even up to 96kHz / 24 bits.  
If you have a Dolby Surround amplifier/decoder, you can still gain the  
benefits of surround sound,  
- either with titles with Dolby Surround label  
- or with DVD films whose sound has been recorded through Dolby Digital  
5.1 channels.  
In both cases,your Pro Logic decoder must be connected to the 2- channel  
analog output of your TV/DVD set (see page 24 cinch audio outputs).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:46 Page 20  
Language selection  
During the initial installation (page 6),the language you choose during the first step has automatically been selected  
for the DVD part. Nonetheless, you may change the language for the player menus, and choose the languages you  
prefer for dialogues, subtitles and disc menus.You can change the language for any disc during playba, see page 22.  
Select the Languages line from the Main menu using  
then press ok to confirm.  
or  
button,  
The LANGUAGES menu is displayed.  
To change the player menu languages, select Player Menus line, then using  
or button, select the desired language.  
The language of theTV menus is linked to the language of the player menus.  
Any change in the language of the player menus also affects theTV menus and vice versa.  
To change the preferred language for disc menus, select Disc Menus line,  
then using or  
button select the language.  
If the chosen language is available for a title, it will automatically be selected.  
To change the preferred language for dialogues, select Audio line, then using  
or button select the language.  
The “Original” option corresponds to a language which has been defined as the default  
language on the disc.  
If the chosen language is available for a title, it will automatically be selected.  
If it is not, the disc’s default language will be selected.  
To choose the preferred language for subtitles, select Subtitles line  
then using or  
button, select the language.  
If the chosen language is available, it will automatically be selected when you display the  
subtitles (see page 22). If it is not, the “subtitle” language indicated on the disc will be  
selected.  
If you choose the “automatic” option, the preferred language used for sub-titles will be the one  
you chosen for the dialogues (see above). Because of this, if the preferred language for  
dialogues is not available, but subtitles are available in this language, these subtitles will  
automatically appear on screen.  
More info  
The different languages and subtitles that are available are  
indicated on the DVD cover.  
To change the subtitles language while playing a DVD,display the subtitles  
info by pressing the  
Using or  
key of your remote control.  
button, select the language (see page 22).  
You will also find there the audio formats that are available  
according to the languages, image format, region and type of disc.  
OTHER LANGUAGES:  
To change the dialogue language while playing a DVD, display the audio  
info by pressing the button on your remote control.  
To select a different language to those displayed for disc menus, dialogue  
and subtitles, select the “Other” option and enter the 4-digit code for the  
relevant language.You will find the list of codes at the end of this manual.  
Using  
or  
button, select the language (see page 22).  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:46 Page 21  
Info Menus  
The Info menu can be used to access information on a disc being played, as well as other particuliar functions.  
This page describes the direct access and repeat play functions.  
Video CD info menu  
Audio CD info menu  
DVD info menu  
To display all the information, press the PLAY button to start  
playback and press the info (yellow) button on the remote control.  
EN  
Direct access  
A DVD may contain several titles, which may be different films or programmes.These titles  
TV  
DVD  
may be divided into numbered chapters.  
Audio CDs contain tracks, which you can access.  
Video CDs may also contain Indices.  
DVD  
To directly access aTitle (T), a Chapter (C), aTrack (T) or an Index (I), select  
one of these items using or , button, then choose a number using  
/
buttons or by directly entering a number using the numeric buttons.  
To directly access another part of the disc, select the Time indication info  
using or button, then enter a time using the numeric buttons.You must  
Audio CD  
Video CD  
specify the tens and units for the hour, minutes and seconds: for example, to  
access the twentieth minute of a disc, enter 0, 0, 2, 0, 0, 0. Confirm with ok.  
This function is not available on some discs, even if the elapsed time appears on the screen.  
Repeat playback  
This function allows you to repeat the playback of a title, chapter, track,A-B chosen segment  
(except forVideo CDs), or whole disc.  
This function is only available with discs for which the elapsed time appears.  
Select the  
info using  
or  
button. Choose an option using the  
/
. Confirm with ok.  
To repeat a sequence between two points A and B, choose the option  
“repeat A-B”, then follow the given instructions for entering both points.  
To stop the playback repeat:  
- select the Repeat info and choose the “stop” option,  
- press the STOP button twice,  
- access the disc menu by pressing the disc menu button.  
More info  
REPEAT PLAYBACK  
A-B REPEAT PLAYBACK for DVDs and Audio CDs  
The repeat principle is based on a loop reading between a starting and a  
finishing point.  
If during a fast forward or rewind operation point B is reached, the player  
will proceed at normal speed from A point.  
On some discs, interactive menus may appear during playback: as you  
have to activate some functions within the menu to be able to play these  
discs.  
If during a fast search the A point is reached, the player will start playing  
at normal speed from A point.  
The A-B repeat mode will be cancelled if you press STOP twice, the disc  
is ejected or if another repeat mode is selected.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 17/06/02 11:46 Page 22  
Info Menus  
Start reading a disc with the PLAY button, then press the info (yellow) button of the remote control.  
Markers (DVD and Audio CD)  
The player can store up to 5 locations on the disc, as long as the disc remains in the player  
(and if theTV/DVD set has not been switched off using the On/Off switch). During that time,  
you can directly access any of these locations.This function is only available with discs with  
that have the elapsed time appearing in the Info menu.  
Select the  
info using  
or  
button, and press ok to confirm the setting  
of a marker.  
Audio, Subtitles, Camera angles (DVD)  
Some discs have multiple audio tracks, primarily used for the different languages.  
The default language is the one selected in the main menu (see page 14).  
To select the language during playback, select the  
info using  
or  
button, then choose a language using buttons.  
/
During playback, you can display or hide the subtitles and change the subtitle language.The  
default setting is the one chosen in the main menu (see page 20).  
To display or hide subtitles, select the  
choose a language using buttons.  
info using  
or  
button, then  
/
Some discs have multiple camera angles for certain scenes.  
To change the camera angle, select the  
choose the angle using buttons.  
info using  
or button, then  
/
Playback mode and Introscan (Audio CD)  
To change the playback mode, select the  
info using  
or  
button, then  
choose a mode (Standard, Random, Program) using  
/
buttons.  
The Progr. mode is only available if a list has been programmed using “Edit Program” function  
(“Play Mode ” menu in the main menu, see page 18).  
To play the first 10 seconds of each track, select the Introscan info using  
or  
button, then press ok to confirm.  
Audio channel (Video CD)  
Select the info using or  
sound; left-hand side channel; right-hand side channel; left & right mono)  
using buttons.  
button, then choose an option (stereo  
/
More info  
MARKERS  
To create a new marker, select a location indicated as “unmarked” using  
or buttons,and press ok.Two new icons are displayed:a play button  
DIRECT ACCESS  
You can use the remote control buttons to directly access the required info.  
To directly access the audio info,press the  
control.  
button on your remote  
and another representing a trashcan.  
To start playback from a marker, select the  
validate.  
icon then press ok to  
To directly access the sub-title info, press the  
remote control.  
button on your  
To delete a marker, select the  
icon then press ok to validate.  
To directly access the angle info, press the  
remote control.  
button on your  
To automatically display the camera angle info as soon as several camera  
angles are available, activate the “Info display” option in the DISPLAY  
menu.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV_DVD_LCD_en 27/06/02 10:58 Page 23  
Connections  
YourTV/DVD has a number of sockets which can be used to connect different types of equipment.  
This page contain a description of the various sockets and relevant connections.  
AV1 SCART socket (input-output) at the back of theTV/DVD.  
These sockets can be used to connect aVCR or a camcorder (VHS, S-VHS,  
8 mm ou Hi 8), a decoder, a satellite receiver, a DVD player, a games console  
or any device producing an RGB signal.  
Press once av button on your remote control to select AV1 and display  
images from the connected equipment.  
For some equipment conected to the AV1 SCART socket, this selection is done automatically.  
AV2 Audio / Video CINCH sockets (input) at the back of the  
AV2  
TV/DVD.  
These can be mainly used to connect a camcorder (VHS or 8 mm).  
Press twice av button on your remote control to select AV2 and display images from  
the connected equipment.  
EN  
When you switch off the connected device, theTV/DVD set will remain on programme AV2.  
To return to a channel, enter its number on the remote control.  
TV  
DVD  
Audio L / R CINCH sockets (output) at the back of theTV/DVD.  
These can be used to connect an Hi-Fi amplifier using a CINCH – CINCH  
cable.  
Audio  
Enable the External Amp function in the PREFERENCES menu to cut  
out the TV/DVD’s left and right channels.  
Adjust the volume using the amplifier.  
Headphone  
Headphone socket located at the right-hand side of theTV/DVD.  
Enables you to connect stereo headphones or earphones.  
DIGITAL AUDIO socket at the back of theTV/DVD.  
This can be used to connect a Dolby Digital amplifier/decoder. Do not forget  
to check the type of sound in the Main menu of the DVD part (see page 19).  
More info  
NexTView Link  
Connecting a video recorder  
NexTView Link is anintelligentlink,which can be used to set up channels  
and as an easy way to set programmes for recording on a video recorder  
with the NexTView Link function or similar (Easy Link, Smart Link,  
Megalogic, etc.) from aTV/DVD already set up.The video recorder should  
be connected to the AV1 socket using a AVLink Scart cable.  
To obtain optimum picture quality, use a SCART cable. However, you can  
also connect a video recorder to theTV/DVD using the aerial socket.  
The diagram on the inside cover at the end of the manual illustrates how  
this is done.  
If you connect a video recorder only via the aerial socket (without any AV  
socket connection), switch it on and play a cassette.  
Then use the Auto update or the manual channel set-up, of the  
INSTALLATION OVERVIEW to search for the video recorder signal  
(refer to the Manual set-up section on page 7).  
If you bought an Easy Link video recorder before 1997, it is possible that  
the recording function is not supported.  
Setting up channels  
The NexTView Link can be used to automatically download the terrestrial  
and cable channels already stored in the TV/DVD to the video  
recorder.They will be arranged in the same order on both items of  
equipment.Refer to the instructions for your video recorder to find out how  
this is done.  
The player’s digital audio (optical) output jack fully complies with  
the international standard governing this type of jack (IEC 958). It is  
designed exclusively for connection to a Dolby Digital or a suitable  
decoder.  
Do not use the DigitalAudio Output jacks to connect to an equipment  
other than a Dolby Digital or a suitable decoder. Such a connection can  
create a high level of noise that may be harmful to your ears,  
and could damage headphones or speakers.  
Older digital equipment, some of which are not fully compliant with  
IEC 958, are likely to cause this problem.To avoid this drawback, use  
the «audio-digital output» menu (see page 14) to convert the Dolby  
Digital audio-digital output from bit to linear PCM flux.  
Immediate recording  
The NexTView Link function can be used to record what you are currently  
watching.  
You simply press the relevant button on the video recorder remote control  
(usually REC) and the recorder will automatically switch to the same  
channel as theTV/DVD and start recording.  
Refer to the instructions for your video recorder to find out the relevant  
button to press and for more information on the subject.  
TV-DVD-LCD/GB/FR-BEI/05-02  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Technicolor Thomson CD Player PDP2030 User Manual
Therma Stor Products Group Dehumidifier 90H User Manual
Toshiba Cell Phone G710 User Manual
U Line Ice Maker ADA151M User Manual
Ultralink Network Card UL2 DA User Manual
Uniflame Charcoal Grill CBT802W User Manual
USRobotics Cordless Telephone 9630 User Manual
ViewSonic Projector PJ551D User Manual
Vivitek Flat Panel Television LT32PL3 A User Manual
Wagner SprayTech Paint Sprayer GM 5000EAC User Manual