TEAM PRODUCTS INTERNATIONAL INC. Limited Warranty
WhAT IS COvERED: Any defect in materials and workmanship.
FOR hOW LONg: 2 years from date of purchase.
WhAT WE WILL DO: If your product is defective and returned within 30 days
after the date it was purchased, we will replace it at no charge to you. If
returned after 30 days but within 2 years of the date of purchase we will
repair it or, at our option, replace it at no charge to you.
If we repair your product, we may use new or reconditioned replacement
parts. If we choose to replace your product, we may replace it with a
new or reconditioned one of the same or similar design. The repair or
replacement will be warranted under our standard 2 year warranty.
LIMITATIONS: IMPLIED WARRANTIES, INCLUDINg ThOSE OF FITNESS FOR A
PARTICULAR PURPOSE AND MERChANTAbILITy (AN UNWRITTEN WARRANTy
ThAT ThE PRODUCT IS FIT FOR ORDINARy USE), ARE LIMITED TO 2 yEARS
FROM DATE OF PURChASE. WE WILL NOT PAy FOR LOSS OF TIME, INCONvE-
NIENCE, LOSS OF USE OF yOUR PRODUCT OR PROPERTy DAMAgE CAUSED
by yOUR PRODUCT OR ITS FAILURE TO WORk, OR ANy OThER INCIDENTAL
OR CONSEqUENTIAL DAMAgES INCLUDINg PERSONAL INjURy.
18V
Cordless Drill
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damages,
so the above exclusions or limitations may not apply to you.
WhAT WE ASk yOU TO DO: To get warranty service for your product,
you must provide proof of the date of purchase. Within 30 days of the
date it was purchased, return your product to your place of purchase for
immediate replacement. After 30 days, but before the end of the 2 year
warranty period, you may return the product to the following address:
TEAM PRODUCTS INTERNATIONAL INC.
Attn: Customer Service Returns
35 A Continental Drive
Wayne, Nj 07470
We suggest that you retain your original packing material in the event
you need to ship your product. When sending your product include your
name, address, phone number, proof of date of purchase, and a
description of the operating problem. After repairing or replacing your
product, we will ship it to your home or office within four weeks.
WhAT ThIS WARRANTy DOES NOT COvER: Among oTher ThIngS ThIS
WArrAnTy doeS noT cover defecTS reSulTIng from AccIdenTS,
dAmAge WhIle In TrAnSIT To our ServIce locATIon, AlTerATIonS,
unAuThorIzed repAIr, fAIlure To folloW InSTrucTIonS, mISuSe, fIre,
flood, And AcTS of god. If your producT IS noT covered by our
WArrAnTy, cAll our cuSTomer ServIce number AT (888) 231-4022 To
deTermIne WheTher We WIll repAIr your producT And oTher repAIr
InformATIon, IncludIng chArgeS. We, AT our opTIon, mAy replAce
rATher ThAn repAIr your producT WITh A neW or recondITIoned
one of The SAme or SImIlAr deSIgn. The repAIr or replAcemenT WIll
be WArrAnTed for 2 yeArS.
Owner’s Manual
PMD8129 Models
ThIS lImITed WArrAnTy IS The only one We gIve on your producT,
And IT SeTS forTh All our reSponSIbIlITIeS regArdIng your producT.
There Are no WArrAnTIeS WhIch exTend beyond The deScrIpTIon SeT
forTh Above.
©2006 The Coleman Company, Inc. All rights reserved.
STATE LAW RIghTS: This warranty gives you specific legal rights and you
may also have other rights which may vary from state to state.
COLEMAN® and
are registered trademarks of The Coleman Company, Inc., used under license. Designed in the USA and
custom-manufactured in China for Team Products International Inc. Distributed byTeam Products International Inc., Mountain Lakes, NJ 07046.
PMD8129033106-166
Download from Www.Somanuals.com. All Manuals Search And Download.
PMD8129 Models
Owner’s Manual
Welcome
Personal Safety
This COLEMAN® product has been carefully engineered and manufactured to
give you dependable operation. Please read this manual thoroughly before
operating your new COLEMAN® product, as it contains the information you
need to become familiar with its features and obtain the performance that will
bring you continued enjoyment for many years. Please keep this manual on file
for future reference.
1. Stay alert, watch what you are doing, and use common sense when
operating a power tool. Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention
while operating power tools may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long
hair. Keep your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
GENERAL SAFETY RULES - FOR ALL BATTERY OPERATEDTOOLS
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
3. Avoid accidental starting. Be sure switch is in the locked or off
position before inserting battery pack. Carrying tools with your finger
on the switch or inserting the battery pack into a tool with the switch on
invites accidents.
4. Remove adjusting keys or wrenches before turning the tool on. A
wrench or a key that is left attached to a rotating part of the tool may result
in personal injury.
Failure to follow all instructions listed below, may result in electric shock, fire
and/or serious personal injury.
5. Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enable better control of the tool in unexpected
situations.
SAVETHESE INSTRUCTIONS.
Work Area
6. Use safety equipment. Always wear eye protection. Dust mask,
non-skid safety shoes, hard hat, or hearing protection must be used for
appropriate conditions.
1. Keep your work area clean and well lit. Cluttered benches and dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite the dust or fumes.
Tool Use and Care
1. Use clamps or other practical way to secure and support the work
piece to a stable platform. Holding the work by hand or against your
body is unstable and may lead to loss of control.
3. Keep bystanders, children, and visitors away while operating a
power tool. Distractions can cause you to lose control.
2. Do not force tool. Use the correct tool for your application.The
correct tool will do the job better and safer at the rate for which it is
designed.
Electrical Safety
1. Do not abuse the cord. Never use the cord to carry the tool. Keep
cord away from heat, oil, sharp edges, or moving parts. Replace
damaged cords immediately. Damaged cords may create a fire.
3. Do not use tool if switch does not turn it on or off. A tool that cannot
be controlled with the switch is dangerous and must be repaired.
4. Disconnect battery pack from tool or place the switch in the locked
or off position before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
Applies only to tools with a separable battery pack.
2. A battery operated tool with integral batteries or a separate bat-
tery pack must be recharged only with the specified charger for the
battery. A charger that may be suitable for one type of battery may create a
risk of fire when used with another battery.
5. Store idle tools out of reach of children and other untrained
persons. Tools are dangerous in the hands of untrained users.
3. Use battery operated tool only with specifically designated battery
6. When battery pack is not in use, keep it away from other metal
objects like: paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to
another. Shorting the battery terminals together may cause sparks, burns,
or a fire.
pack. Use of any other batteries may create a risk of fire.
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PMD8129 Models
Owner’s Manual
3. Do NOT expose the battery or battery charger to rain or moisture.
7. Maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools with sharp cutting edge are less likely to bind and
are easier to control.
4. Use of any attachment not recommended in this manual may result in the
risk of fire, electric shock or injury to person and will void the warranty.
8. Check for misalignment or binding of moving parts, breakage of
parts, and any other condition that may affect the tool’s operation.
If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
5. To reduce the risk of damaging the battery charger power cord, be sure to
pull the plug rather then the cord when disconnecting it from the power
supply. Always position the cord so it will not be stepped on or tripped over.
This will prevent damage to the cord.
9. Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one tool may create
a risk of injury when used on another tool.
6. An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord can result in risk of fire or electric shock. If
using an extension cord make sure that:
Service
A)The pins on the plug of the extension cord are the same
number, size and shape as those on the plug on the charger.
1. Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel may result in a
risk of injury.
B)The extension cord is properly wired and in good working
condition.
2. When servicing a tool, use only identical replacement parts.
Follow instructions in the Maintenance section of this manual. Use
of unauthorized parts or failure to follow Maintenance Instructions may
create a risk of shock or injury.
C)The wire size is the same or larger than the ones specified
below:
Recommended size of Extension Cord for Battery Charger
SPECIFIC SAFETY RULES AND/OR SYMBOLS
Length of Cord (Feet)
AWG Size of Cord*
25
18
50
18
100
16
150
14
1. Hold tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring.
Contact with a “live” wire will also make exposed metal parts of the tool
“live” and shock the operator.
*The smaller the AWG (American Wire Gauge) number of the extension cord,
the higher the capacity of the cable for conducting current to ensure proper
usage of the tool.
2. Keep hands clear of moving parts.
3. Do not touch moving parts. Allow the power tool accessories (bit and
blades etc.) to cool before touching them.They can become extremely hot
during use and can burn your skin.
7. Do not operate charger with a damaged cord or plug.
8. Do not operate the charger if it has received a sharp blow, been dropped or
damaged in any other way.
4. WARNING:This product contains chemicals, including lead, known to the
State of California to cause cancer, and birth defects or other reproductive
harm.
9. Do not open the drill, battery or battery charger.There are no user
serviceable parts. Opening the unit will void the warranty.
10. Unplug the charger from its power source when not in use.
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER:
11. Do not touch the terminals inside the battery charger with any other metal
object such as nails or coins.This can short the charger.
1. This manual includes important safety instructions for the battery charger.
Fully read all instructions and warning labels before using the battery or
battery charger.
12. Do not store the unit in areas where the temperature can exceed 120F(48°C).
2. To reduce the risk of electric shock or injury, use ONLY the battery charger
supplied with this unit to charge the battery. If you separately purchase a
COLEMAN® Pro Series™ Fast Charger, it may be used to charge a
separately purchased COLEMAN® Pro Series™ Fast Charge replacement
battery.The Fast Charger cannot be used to charge the battery(ies) included
with this drill.
13. Do not throw the battery or battery charger in fire.This can cause an
explosion.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PMD8129 Models
Owner’s Manual
14. WARNING: Batteries vent hydrogen gas and may explode in the presence
of a source of ignition, such as a pilot light.To reduce the risk of serious
personal injury, never use any cordless product in the presence of an open
flame. An exploded battery can propel debris and chemicals. If exposed,
flush with water immediately for a minimum of 10 minutes and seek
medical attention.
ASSEMBLY
Controls and Components:
Batteries and AC Charger
1. Battery with Release Buttons On Each Side (1 pc)
2. 120V AC Adaptor
15. During extreme conditions, the battery may leak.This does not indicate a
battery failure. However, if the liquid gets on your skin, immediately wash
with soap and water, neutralize the area with a mild acid such as lemon
juice or vinegar. If the liquid gets into your eyes, flush them with clean
water immediately for a minimum of 10 minutes and seek medical attention.
3. Charging Stand with LED Charging Indicators
3
1
7
5
4
Symbols:
V ……................................................ volts
................................................. direct current
n0 ……............................................... no load speed
.../min ............................................... revolutions or reciprocation per minute
Hz …….............................................. Frequency
Ø ……................................................ Diameter
2
6
10
8
9
11
14
Drill:
12
13
.......................................... Contains non-spillable nickel-cadmium
4. 3/8” Jacobs Keyless Chuck
Ni-Cd
battery. Battery must be recycled or
disposed of properly.
5. 24 AdjustableTorque Settings Control Ring
6. Forward/Lock/Reverse Switch
FUNCTIONAL DESCRIPTION
7. High/Low Speed Switch (PMD8131 and PMD8133 only)
8. Variable SpeedTrigger Switch
SPECIFICATIONS for PMD8129
9. Accessory/Bit Holder
Voltage
Speed
18V DC
10. Comfort Rubber Grip (PMD8131 and PMD8133 only)
0-600RPM
Torque Settings 24 + Drill
Chuck Capacity up to 3/8”
ACCESSORIES
Charger Input 120V AC 60Hz
ChargingTime Approx. 3 –8 Hours
11. 6 Various Screwdriver Bits
12. 2” Extension Bar
BatteryType
Ni-Cd
13. 2 Double Ended Screwdriver Bits
14. 6 Various Drill Bits
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PMD8129 Models
Owner’s Manual
OPERATION
UsingThe Drill
INSTRUCTIONS FOR USE:
ChargingThe Battery
CAUTION: Always make sure that the tool is switched
OFF and the battery pack is removed from the drill
before changing any bits.
Loosen the keyless chuck by holding the ring and
turning the sleeve counter clockwise. Select the drill bit
or screwdriver you want to use and place it in the
keyless chuck.Twist the sleeve of the keyless chuck
clockwise to tighten it, making sure the drill bit remains
in the center of the keyless chuck’s teeth.
THE BATTERY(IES) MAY NOT BE FULLY CHARGED FROMTHE FACTORY.
READ ALL INSTRUCTIONSTHOROUGHLY PRIORTO FIRST USE.
The Drills covered by this manual use the same battery and battery charger.
Your Drill comes complete with a rechargeable battery which we recommend
that you fully charge before the first use.
Drill must be charged for 8 hours prior to first use. After initial charge, allow
approximately 3 to 8 hours to recharge your battery.
The battery should be recharged when the drill does not operate up to its
normal performance level. Do not continue to operate the drill in this depleted
capacity. Recharge the battery immediately.
To increase the life of your battery, do not leave the battery charging for more
than 8 hours. While this is not a safety concern, overcharging may reduce the
life of the battery.
Twist the 24 setting torque control ring to the desired
setting. Lower settings are better for light work such as
driving screws into soft materials. Higher settings are
recommended for drilling into harder surfaces.
When properly adjusted, the clutch will slip at its present
torque setting to prevent driving the screw too
deep or to prevent damage to the tool.
To operate the drill in forward setting,
Overtime, if drill is not used, the battery will lose capacity. For maximum perfor-
mance, recharge the battery after prolonged storage or non-use periods.
simply keep the Forward/Lock/Reverse switch flat
against the side of the drill as shown.To change
to reverse setting, move the Forward/Lock
NOTE: Before inserting or removing the battery from the charging base, always
ensure that the base is not plugged into a 120V power source.
/Reverse switch until it is flat against the
opposite side of the drill. Keeping the Forward/
Lock/Reverse switch in the center position locks
the drill and prevents unintentional use. It is recommended that the Drill is in
the locked position when it is not in use or is being stored.
1.To begin charging, remove the battery pack from the tool by pressing on the
battery release buttons on either side of the battery pack and pulling down.
2. Plug the battery pack into the battery charger making sure the positive (+) and
negative (-) poles of the battery match the positive (+) and negative (-) poles of
the battery charger.
CAUTION: Always check the direction of the rotation before using the drill.
The speed of the drill is increased by the amount of pressure you place on the
ON/OFF trigger switch.The less pressure you put on the trigger switch, the
slower the drill will go.Your drill comes with an automatic braking function that
quickly stops the chuck from turning when the trigger switch is released.
Your drill has one speed (0-600 rpm).
NOTE:The battery will only fit into the battery charger and the tool one way.
3. Plug one end of the 120 Volt AC Adaptor into the battery charger and the other
end into any standard 120 Volt wall outlet.The RED LED indicator on the battery
charger will illuminate to indicate that the battery is charging.
4. Full charging will take between 3 to 8 hours.
NOTE:While the battery is placed in the charger, the RED LED indicator light will
remain on. If charging more than one battery, wait at least 15 minutes between
each charge. Use only the battery charger that is supplied with this tool. Using
another charger may cause damage to the battery.
Screwdriver Operation
Place the point of the screwdriver bit into the head of
the screw and apply slight pressure to the tool. Press
the trigger switch slightly and then gradually increase
the drill speed. Release the trigger switch as soon as
the clutch engages.
Note: Starting the drill at too high of a speed can
damage the drill bit or reduce the life of the bit.
Make sure that the driver bit is inserted straight in the
screw head or the screw may become damaged or will
not be inserted properly. When driving wood screws,
pre-drill pilot holes into the surface to make driving
easier.This will also prevent the wood from splitting.
WARNING: Never charge a battery pack again immediately after it has been
fully charged.This can give rise to the battery pack being overcharged and a
reduced battery life. DO NOT leave the battery pack in the charger for more than
8 hours.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PMD8129 Models
Owner’s Manual
Note:When drilling, the drill bit can become stuck.
If this happens, a very high torque will be produced. Always take care to hold
the drill firmly to prevent possible damage or injury.
TROUBLESHOOTINGTIPS:
DRILL DOES NOT WORK?
• Recharge the battery
CHARGING INDICATOR LED NOT ILLUMINATED DURING
RECHARGING?
• Check that battery pack is properly connected to the battery charger
• Check that the AC Adaptor is properly connected at both ends
Maintenance
Clean the Drill regularly. Before cleaning, remove the battery pack and any
accessories (bits etc.).To clean, use ONLY a mild soap and damp cloth on the
housing. Never immerse drill in any kind of fluid. Do not use any solvents or
harsh abrasives on the drill housing as this may cause damage to the unit.
Always keep the ventilation openings clear.
NOTE: All bearings in these tools are lubricated with a sufficient amount of
high-grade lubricant for the life of the unit under normal operating conditions.
No further lubrications required.
CAUTION: DO NOT keep the trigger switch pressed in with tape or any other
permanent means or the circuit will not function properly. A malfunction may
result, possibly causing overheating or damage to the unit.
Do not open the drill, battery or battery charger.There are no user serviceable
parts. Opening the unit will void the warranty.
ACCESSORIES
Please refer to section “ASSEMBLY”
QUESTIONS?
If you have any questions about this product, please contact our Customer
Service Department at (888) 231 4022, 9 am to 5 pm EST, Monday Friday or visit
Download from Www.Somanuals.com. All Manuals Search And Download.
PMD8129 Models
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
|