Quick Installation Guide
TK-200K
TK-400K
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before You Start
Package Content
TK-200/TK-400
Quick Installation Guide
KVM cables
System Requirements
PS/2 Keyboard
PS/2 Mouse
VGA Compatible Monitor
Windows 98/ME/2000/XP(SP1/SP2)/2003 Server, Unix, or Linux
Application
Cable
PC 2
LCD Monitor
2-Port PS/2 KVM
Switch Kit
(TK-200K)
Cable
PS/2 Keyboard
PS/2 Mouse
PC 1
Cable
Cable
PC 2
PC 4
4-Port PS/2 KVM
Switch Kit
(TK-400K)
LCD Monitor
PS/2
Mouse
PS/2
Keyboard
Cable
Cable
PC 1
PC 3
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2. How to Install
Note: The TK-200/TK-400 do not require any drivers or software.
1. Turn OFF all computers and their
peripherals, and then disconnect all
power cords.
2. Use the KVM cables to connect
each computer to the KVM switch.
3. Connect the shared keyboard,
monitor, and mouse to the KVM
switch's Console Port.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Turn ON the connected computers
one-by-one and wait until each
computer's desktop appears.
Your installation is now complete.
Note: Do not press the push button of the KVM switch or perform a "Hot-Key"
command while the computers are booting up. Go to Section 3 Operation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Operation
Note: To switch between computers, you can use the front-panel push button
or the "Hot-Key" commands.
3.1 Push Button
Press the push button to switch between computers.
Push Button. (TK-200 shown)
3.2 Hot-Key Commands
A keyboard hot-key command consists of three keystrokes:
Hot-Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
You then have another 2 seconds to press a command key. If you do not press
a key within 2 seconds, the switch will exit hot-key mode.
Below are the “Hot-Key” commands:
Next Channel
Previous Channel
Auto Scan
ScrLk
ScrLk
ScrLk
ScrLk
+
+
+
+
+
+
=
=
=
ScrLk
ScrLk
S
In Hot-Key mode, press the “Up-Arrow” to select the next port, “Down Arrow” to
select the previous port, and “S” key to set the KVM switch to Auto-Scan mode.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Computer Connections:
KVM Cable:
2 (TK-200) or 4 (TK-400)
TK-200K: 2 sets of 1.2 M (4 ft) High Grade KVM Cables
TK-400K: 4 sets of 1.8 M (6 ft) High Grade KVM Cables
1 x PS/2 keyboard 6-pin mini din
1 x PS/2 mouse 6-pin mini din
1 x VGA HDB15 (15-pin)
Console Port Connectors:
(All Female)
TK-200K:
2 x PS/2 keyboard 6-pin mini din
2 x PS/2 mouse 6-pin mini din
2 x VGA HDB15 (15-pin)
TK-400K:
PC Port Connectors:
(All Female)
4 x PS/2 keyboard 6-pin mini din
4 x PS/2 mouse 6-pin mini din
4 x VGA HDB15 (15-pin)
VGA Resolution:
Port Selection:
1920 x 1440
Push Button and Hot-Key Commands
4 seconds
Auto-Scan Intervals:
PS/2 Interface Power.
Optional 9V DC, 500mA Adapter
Power Type:
TK-200: 113 x 84 x 31 mm
(4.45 x 3.31 x 1.22 inches)
TK-400: 192 x 81 x 31 mm
(7.5 x 3.19 x 1.22 inches)
Dimensions:
Weight:
Approx. 155g. (5.5 oz.) (TK-200)
Approx. 240g. (8.5 oz.) (TK-400)
Operating Temperature:
Storage Temperature:
Humidity:
0ºC ~ 40ºC (32ºF ~104ºF)
-20ºC ~ 60ºC (-4ºF ~ 140ºF)
0%~80%, Non-Condensing
FCC and CE
Certifications:
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Q1: Where is the AC adapter? I did not find one in the box.
A1: The TK-200/TK-400 do not require an AC adapter. It draws power from the
PS/2 connection of your computers. As long as you are connected to the PS/2 port,
your KVM switch will function.
Q2: I have the KVM switch connected properly, but my keyboard and mouse don't
work.
A2: Please make sure your PS/2 ports are working properly by testing it with another
mouse or keyboard. Once you confirm that the PS/2 ports are functional, please reboot
your computers, and try to use the KVM switch again.
Q3: Can I connect or disconnect the KVM cables while the computers are turned on?
A3: Yes, you can connect or disconnect the KVM cables while the computers are
turned on, because the interface is Hot-Pluggable.
Q4: Will the KVM switch restore the keyboard settings when switching between
computers?
A4: Yes, the KVM switch will restore the keyboard settings when switching between
computers. (i.e.: Cap lock, Num key, etc.)
Q5: How do I switch from one computer to another with the KVM switch?
A5: You can switch PCs by pressing the push button on the KVM switch or by using the
Hot-Key commands. Go to Section 3 Operation for more information.
If you still encounter problems or have any questions regarding the TK-200K/TK-400K,
please contact Trendnet's Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause
undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
TRENDnet warrants its products against defects in material and
workmanship, under normal use and service, for the following lengths of
time from the date of purchase.
TK-200K/TK-400K - 2 Year Warranty
If a product does not operate as warranted above during the applicable
warranty period, TRENDnet shall, at its option and expense, repair the
defective product or part, deliver to customer an equivalent product or
part to replace the defective item, or refund to customer the purchase
price paid for the defective product. All products that are replaced will
become the property of TRENDnet. Replacement products may be new
or reconditioned.
TRENDnet shall not be responsible for any software, firmware,
information, or memory data of customer contained in, stored on, or
integrated with any products returned to TRENDnet pursuant to any
warranty.
There are no user serviceable parts inside the product. Do not remove
or attempt to service the product by any unauthorized service center.
This warranty is voided if (i) the product has been modified or repaired
by any unauthorized service center, (ii) the product was subject to
accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within
the applicable warranty period for a Return Material Authorization (RMA)
number, accompanied by a copy of the dated proof of the purchase.
Products returned to TRENDnet must be pre-authorized by TRENDnet
with RMA number marked on the outside of the package, and sent
prepaid, insured and packaged appropriately for safe shipment.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT
OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE
REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR
REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDnet NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR
USE OF TRENDnet'S PRODUCTS.
TRENDnet SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS
TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED
DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE
BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT,
FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW
TRENDnet ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY
LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT,
SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT
OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION
OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY
TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
PAID, AT TRENDnet’S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of
the state of California.
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 Year
Warranty
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
3135 Kashiwa Street
Torrance, CA 90505
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright ©2006. All Rights Reserved. TRENDnet.
|