Quick Installation Guide
TV-IP212/TV-IP212W
TV-IP312/TV-IP312W
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before You Start
Package Contents
?TV-IP212/TV-IP212W/TV-IP312/
TV-IP312W
?Quick Installation Guide
?Utility CD-ROM
?Camera Stand
?RJ-45 Cable
?AC Power Adapter (5V, 2.5A)
?1 x 2dBi Detachable Antenna
(TV-IP212W/TV-IP312W)
System Requirements
?10/100Mbps Ethernet
?CPU: 1GHz processor or above
?Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista)
?VGA Resolution: 800 x 600 or above
?Web Brower: Internet Exploreer (6.0 or higher)
?Windows Vista/XP/2000
1
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Application
2-Way Audio
Internet Camera Server
(TV-IP212/TV-IP312)
TV-IP212
TV-IP312
Cable/DSL 4-Port
Broadband Router
(TW100-S4W1CA))
Internet
Notebook with
PC Card
(TE100-PCBUSR)
Modem
Mobile Phone with
3G Support & Service
10/100Mbps
Wireless 2-Way Audio
Internet Camera Server
(TV-IP212W/TV-IP312W)
TV-IP212W
TV-IP312W
Wireless Firewall Router
(TEW-432APB)
Internet
Notebook with
Wireless PC Card
(TEW-421PC)
Mobile Phone with
3G Support & Service
Modem
54Mbps
2
Download from Www.Somanuals.com. All Manuals Search And Download.
English
2. Hardware Installation
1. Attach the Antenna. (TV-IP212W/
TV-IP312W)
2. Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet port of the Internet
Camera.
3. Connect external speaker to the
Internet Camera Server (optional)
4. Connect the AC Power Adapter to
the Internet Camera Server and
then to a power outlet.
5. Connect USB flash drive to the
Internet Camera Server (optional)
6. Verify the Power and Link LEDs
are on (TV-IP312W is shown).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3. Configure the Internet Camera
Note: It is recommended that you configure the Internet Camera from a wired
computer. Before the Internet Camera can be configured, a Static IP address
must be assigned on your computer's network adapter in the subnet of
192.168.10.x. Since the Internet Camera's default IP address is
192.168.10.30, make sure no other network devices are assigned an IP
address of 192.168.10.30. (Refer to the Troubleshooting section on how to
configure TCP/IP settings on your PC.)
1. Open your web browser, type
http://192.168.10.30 in the
Addres bar, and press Enter.
2. Enter user name and password,
then click OK.
User name: admin
Password: admin
3. Right click and select Active X
Control.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
English
4. Click Install.
5. Click Setup and then click
Network. Configure the network
settings to be in the same subnet
as your network. Then click
Apply.
6. Click Network and then click
Wireless. Configure your wireless
settings to match your wireless
network's settings and then click
Apply (Enable/Enter the
WEP/WPA key when your wireless
network is encrypted. Contact
your network administrator for
more information).
(TV-IP212W/TV-IP312W only)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
English
7. Disconnect the RJ-45 cable
(TV-IP212W/TV-IP312W).
8. Verify the Power and Link LEDs
are on.
Note: The TV-IP212W/TV-IP312W will not work wirelessly until you disconnect
the Ethernet cable from the back of the camera.
9. Click Live View. Then click
MJPEG compression if you are
using Firefox or Safari browser.
Your installation is now complete.
Note: For detailed information regarding the TV-IP212/TV-IP212W/TV-
IP312/TV-IP312W configuration and advanced settings, please refer to the
Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
Thank you for choosing TRENDnet
6
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Troubleshooting
Q1: How do I configure TCP/IP settings on my computer?
1. Go into the Control Panel and double-click
the Network Connections icon, and then
right-click the Local Area Connection icon
and then click Properties.
2. Click Internet Protocol (TCP/IP) and then
click Properties. Then click on Use the
following IP address, and make sure you
assign your network adapter an IP address
in the subnet of 192.168.10.x.
Q2: The Image is blurry. How can I adjust the focus on the Internet camera?
A2: You can adjust the Internet Camera’s focus by rotating the lens.
Q3: When I click on Live View the image does not load?
A3: First, make sure that you are using a browser that supports Active X (Internet Explorer)
or Java (Firefox or Safari). Second, make sure that Active X or Java is installed.
Q4: How do I connect the TV-IP212W/TV-IP312W to my wireless router or access point?
A4: Make sure that you configure the camera to have the same SSID, encryption mode and
key (if enabled). Follow the instructions in section 2 to configure the camera with the SSID
and encryption key.
Q5: After I successfully configured the TV-IP212W/TV-IP312W to match my wireless network
settings, I can not connect to the camera.
A5: First, verify that the wireless settings match your wireless network settings. Second,
verify in the wireless section of the browser configuration that the Enable option is checked.
Third, make sure to disconnect the Ethernet cable from the camera and verify that the LINK
LED is blinking green.
Q6: I forgot my password. What should I do?
A6: Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.
This will return settings back to factory defaults. The default IP address is 192.168.10.30.
The default administrator ID and password is admin.
If you still encounter problems or have any questions regarding the TV-IP212/TV-IP212W/
TV-IP312/TV-IP312W, please contact TRENDnet’s Technical Support Department.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.
Download from Www.Somanuals.com. All Manuals Search And Download.
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
20675 Manhattan Place
Torrance, CA 90501
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright ©2007. All Rights Reserved. TRENDnet.
|