TP Link Home Security System TL SC3230 User Manual

Package Contents  
Warning Before Installation  
1
The product model shown in this QIG is TL-SC3230N, as an example.  
Do not keep the Camera exposed  
to direct sunlight.  
It is recommended to mount the Camera where objects often pass,  
and the direction towards the door or passage is much better, see  
the illustration below:  
Quick Installation Guide  
Do not place the Camera in high  
humidity environments such as  
in a kitchen.  
Power Adapter  
Megapixel Surveillance Camera  
TL-SC3230N  
Mounting Bracket  
Wireless N Megapixel Surveillance Camera  
Megapixel Surveillance Camera  
Wireless  
N
Megapixel Surveillance Camera  
Do not place the Camera where  
there are high temperatures  
such as near an oven.  
TL-SC3230/TL-SC3230N  
QIG  
Ethernet Cable  
Resource CD  
(*The pictures are for reference only.)  
System Requirement  
The following operating systems are supported:  
Do not place the Camera near  
devices that emit radio waves,  
such as mobile phones.  
Windows 2000  
Windows Vista  
Windows 2003  
Windows 7  
Windows XP  
The following browsers are supported:  
Internet Explorer 8 or higher  
Safari  
Firefox  
Chrome  
MODEL NO. TL-SC3230/TL-SC3230N  
(*Internet Explore Browser is recommended.)  
Physical Description  
Hardware Connection  
2
3
*
Antenna  
Connect the LAN port on Camera to the LAN Port of your  
router or switch with an Ethernet cable.  
Built-in Microphone  
Micro-SD Card Slot  
Lens & Focus Ring  
Connect the power adapter cord to the Power jack.  
Plug the power adapter into the power outlet.  
Power/Wireless LED  
LAN LED  
Audio Output Jack  
RESET Button  
WPS  
Power Jack  
LAN Port  
LED  
Status  
Oꢁ  
Description  
The camera is powered oꢁ.  
Note:  
Before proceeding, conꢀrm that your PC is connected to your  
Router and can access the Internet.  
Power/  
Wireless  
LED  
The camera ꢀnishes boot-up and is ready to serve. Power on  
the camera, the LED will light up and then go oꢁ to booting  
process. After keeping oꢁ for several seconds, the LED will be  
solid orange.  
Solid Orange  
Make sure that your Router’s DHCP feature is enabled. If not,  
please refer to your Router’s instruction to enable it.  
*
Flash Orange  
The camera has been connected to a wireless network.  
No cable is linked to the camera.  
Solid Green  
Flash Green  
LAN LED  
Ethernet Cable  
Ethernet Cable  
Data is being transmitted or received.  
Button  
Description  
While the camera is ready, press RESET button for at least 5 seconds and  
release it. The camera will be restored to default settings and reboot  
again.  
RESET Button  
* The Antenna and Flash Orange status are for TL-SC3230N only.  
7106504101  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac DVD Recorder DVW516GB User Manual
Teledyne Pet Fence 201A User Manual
Timex Heart Rate Monitor M515 User Manual
Tokina Camera Accessories TM10Z0818GAIPN User Manual
Toshiba Laptop U840W User Manual
Toshiba Security Camera IK C41R2 User Manual
TRENDnet Network Router BRF114 User Manual
Triarch Indoor Furnishings 39660 1 User Manual
Tripp Lite Power Supply APS2448UL User Manual
Vision Fitness Elliptical Trainer S7200HRT User Manual