DESKTOP PHONE SYSTEM
Installation and User Guide
TalkSwitch 48-CVA
v3.10
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1.0 Introduction to VoIP
How does VoIP work?
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i
Does a VoIP call sound like a regular phone call? . . . . . . . . . . . . . . . . . . . . . . . .i
If the power goes out, does the VoIP network stay up? . . . . . . . . . . . . . . . . . . . . .ii
What happens to VoIP if the IP network fails . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
I have a firewall and heard that it can prevent VoIP calls . . . . . . . . . . . . . . . . . . . .ii
What is SIP? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
What is a VPN? Can a VPN help me carry data securly over the Internet? . . . . . . .iii
What’s the difference between a Public and a Private IP address? . . . . . . . . . . . . .iii
What is NAT and how does it affect VoIP? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv
What’s the difference between a Static and a Dynamic IP address? . . . . . . . . . . . .iv
What is a SIP proxy and registrar? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv
What is dynamic DNS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
What is the drawback of dynamic DNS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
How often will my Public IP address change? . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
What is a port number? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi
2.0 Installing TalkSwitch
2.1 What’s included with TalkSwitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2.2 Front Panel Descriptions
2.3 Back Panel Descriptions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
The TalkSwitch 48-CVA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.4 Plugging into the Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.4.1 Attaching telephone lines to TalkSwitch line jacks . . . . . . . . . . . .5
2.4.2 Attaching phones and other analog devices
to TalkSwitch extension jacks . . . . . . . . . . . . . . . . . . . . . . .5
2.4.3 Connecting Devices to the Music and PA Jacks . . . . . . . . . . . . .6
2.4.4 Connecting TalkSwitch to a PC . . . . . . . . . . . . . . . . . . . . . . . . .6
2.4.4.1 Serial connection . . . . . . . . . . . . . . . . . . . . . . . . .7
2.4.4.2 USB connection . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.4.4.3 LAN connection . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.5 Using 2 or more TalkSwitch units on a LAN . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.5.1 Connecting 2 or more TalkSwitch units to a LAN . . . . . . . . . . . . .8
2.5.2 Setting the Unit ID for the first time . . . . . . . . . . . . . . . . . . . . . . .9
2.5.3 Changing the Unit ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
2.5.4 Unit IDs and how they affect the system extension numbers . . . .10
2.5.5 Keeping track of the lines and extensions . . . . . . . . . . . . . . . . .10
2.5.6 Optimizing the system for networked use . . . . . . . . . . . . . . . . .11
2.6 Optimizing your IP network for VoIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
2.6.1 The Broadband Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .12
2.6.2 The Router/NAT/Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
2.6.3 The Local Area Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Download from Www.Somanuals.com. All Manuals Search And Download.
3.0 Configuring TalkSwitch
3.1 Installing the TalkSwitch Configuration Software . . . . . . . . . . . . . . . . . . . . .15
3.2 Running the TalkSwitch Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3.3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3.3.1 System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3.3.1.1 Administration . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3.3.1.2 IP Configuration . . . . . . . . . . . . . . . . . . . . . . . . .22
3.3.1.3 VoIP Configuration . . . . . . . . . . . . . . . . . . . . . . .24
3.3.1.4 Telephone Lines . . . . . . . . . . . . . . . . . . . . . . . . .25
3.3.1.5 VoIP Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
3.3.1.6 Line Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . .29
3.3.1.7 Fax Information . . . . . . . . . . . . . . . . . . . . . . . . . .30
3.3.1.8 Local Extensions . . . . . . . . . . . . . . . . . . . . . . . . . .31
3.3.1.9 Remote Extensions . . . . . . . . . . . . . . . . . . . . . . . .33
3.3.1.10 Extension Ring Groups . . . . . . . . . . . . . . . . . . . .36
3.3.1.11 On-hold/Ringback . . . . . . . . . . . . . . . . . . . . . . .37
3.3.2 Voicemail
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
3.3.2.1 Local Extension Voicemail . . . . . . . . . . . . . . . . . .38
3.3.2.2 Remote Extension Voicemail . . . . . . . . . . . . . . . . .39
3.3.2.3 General Voicemail . . . . . . . . . . . . . . . . . . . . . . . .40
3.3.2.4 Global Settings . . . . . . . . . . . . . . . . . . . . . . . . . .41
3.3.3 Call Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
3.3.3.1 Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
3.3.3.2 Auto Attendant . . . . . . . . . . . . . . . . . . . . . . . . . .44
3.3.3.3 Telephone Lines . . . . . . . . . . . . . . . . . . . . . . . . .50
3.3.3.4 VoIP Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
3.3.3.5 Local Extensions - Call Cascade . . . . . . . . . . . . . .55
3.3.3.6 Remote Extensions - Call Cascade . . . . . . . . . . . .57
3.3.3.7 Extension Ring Groups - Call Cascade . . . . . . . . .59
3.3.4 Call Back / Call Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
3.3.4.1 Auto Call Back . . . . . . . . . . . . . . . . . . . . . . . . . .62
3.3.4.2 Prompted Call Back . . . . . . . . . . . . . . . . . . . . . .65
3.3.4.3 Call Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
3.3.5 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
3.3.5.1 Audio Controls . . . . . . . . . . . . . . . . . . . . . . . . . .68
3.3.5.2 Transfer Options . . . . . . . . . . . . . . . . . . . . . . . . .69
3.3.5.3 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . .71
3.3.5.4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .73
3.3.5.5 Troubleshooting – Advanced . . . . . . . . . . . . . . . .75
4.0 Using TalkSwitch
4.1 In the Office – Receiving calls with or without the Auto Attendant . . . . . . . . .79
4.1.1 Receiving calls using the Auto Attendant . . . . . . . . . . . . . . . . .79
4.1.2 Receiving calls without the Auto Attendant . . . . . . . . . . . . . . . .80
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 In the Office – Making and Receiving Calls . . . . . . . . . . . . . . . . . . . . . . . .80
4.2.1 Making calls from a Local Extension . . . . . . . . . . . . . . . . . . . .80
4.2.2 Receiving calls at a Local Extension . . . . . . . . . . . . . . . . . . . . .80
4.2.3 Placing calls on Hold at a Local Extension . . . . . . . . . . . . . . . .81
4.2.4 Transferring calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
4.2.5 Call Park – Parking and retrieving callers . . . . . . . . . . . . . . . . .82
4.2.6 Call Queue – Queuing and retrieving callers . . . . . . . . . . . . . .83
4.2.6.1 – Queuing calls to a single extension . . . . . . . . . .83
4.2.6.2 – Queuing calls to a ring group . . . . . . . . . . . . . .84
4.2.7 Conference calling with TalkSwitch . . . . . . . . . . . . . . . . . . . . .84
4.2.8 Making and receiving calls using VoIP . . . . . . . . . . . . . . . . . . .85
4.2.9 Using Phones connected in parallel to TalkSwitch . . . . . . . . . . .86
4.2.10 Modems and telephone line access . . . . . . . . . . . . . . . . . . . .87
4.3 Out of the Office - Receiving Calls through Call Forwarding . . . . . . . . . . . .87
4.3.1 The three ways to forward calls . . . . . . . . . . . . . . . . . . . . . . . .87
4.3.2 Transferring calls from a Remote Extension . . . . . . . . . . . . . . . .88
4.3.3 Screening options for forwarded calls . . . . . . . . . . . . . . . . . . .88
4.3.4 Calls over VoIP with SIP phones and Gateways . . . . . . . . . . . . .90
4.4 Using the TalkSwitch Voicemail System . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
4.4.1 Activating Voice mailboxes . . . . . . . . . . . . . . . . . . . . . . . . . . .91
4.4.2 Retrieving Messages / Accessing a Voice mailbox . . . . . . . . . . .91
4.4.3 Pager and Cell Phone notification . . . . . . . . . . . . . . . . . . . . . .93
4.5 Music-on-Hold
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
4.6 Mode Switching Options
4.7 Out of the Office – Making Calls with Call Back and Call Bridge . . . . . . . .96
4.7.1 Using Call Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
4.7.2 Using Call Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
4.8 Upgrading the TalkSwitch Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Appendices
Appendix A - Help & Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
Appendix B - Using TalkSwitch with Telephone Company Calling Services . . . . .115
Appendix C - Quick Commands and Touch Tone Functions . . . . . . . . . . . . . . .119
Appendix D - Safety Precautions and Regulatory Information . . . . . . . . . . . . . .123
Appendix E - TalkSwitch One Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .127
Appendix F - Return Policy
Appendix G - Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
Appendix H - TalkSwitch and Power Interruptions . . . . . . . . . . . . . . . . . . . . . .135
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Index
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
to VoIP
1
The TalkSwitch 48-CVA is a hybrid PSTN/VoIP phone system. The addition of VoIP to
the TalkSwitch product line adds the ability to use a broadband IP connection for
voice calls.
The TalkSwitch 48-CVA can be used in many different applications. The most popu-
lar configurations are multi-branch, teleworker integration and service provider
integration.
How does VoIP work?
Voce over IP, or VoIP, sends calls over the Internet or any Internet Protocol (IP) net-
work by converting voice traffic into data packets. These packets are then routed over
the IP network in the same way as other data, reassembled at the point of arrival, and
then converted back to voice.
Does a VoIP call sound like a regular phone call?
Under the right conditions, VoIP calls can sound as good or even better than regular
phone calls. Voice quality is affected by numerous issues, including how it is com-
pressed for delivery over the Internet, decompressed, and how packets are processed.
A few steps can help ensure call quality.
1) High-speed connections on both ends of the call: Good quality VoIP is not pos-
sible over a dial-up modem connection. To support more simultaneous VoIP
calls, a broadband connection is required. Please visit our site at
www.talkswitch.com/voip/voip_test.php to determine what your Internet con-
nection can support.
2) Choose the right CODEC for your location: TalkSwitch supports 3 CODECs
(compression algorithms). The default CODEC is G.729 which uses approxi-
mately 20Kbps bandwidth upstream and 20Kbps bandwidth downstream for
each call. G.729 provides very good call quality while minimizing bandwidth
usage.
1.0
Download from Www.Somanuals.com. All Manuals Search AInndtrDoodwunlcotaiod.n
i
The G.726 (32Kbps) CODEC is a better quality solution compared to the G.729
CODEC. It does, however, require more bandwidth per call. A G.726 call will
typically require 50Kbps bandwidth upstream and 50Kbps bandwidth
downstream for each call.
The G.711 CODEC provides the best voice quality. The tradeoff is the bandwidth
requirement. G.711 calls typically requires up to 100Kbps bandwidth upstream
and 100Kbps bandwidth downstream.
For example, if you have a typical 1Mbps ADSL connection from your service
provider, this usually means that you have an upstream bandwidth of
approximately 380 Kbps. Just because the service provider says that you have 380
Kbps upstream bandwidth does not mean that the full 380 Kbps is available. In
fact, a conservative approach is to estimate just over half of the upstream
bandwidth as being available. In this case you could safely support 2
simultaneous G.711 calls or 4 simultaneous G.726 calls or 10 simultaneous
G.729 calls. These estimates do not factor in other data traffic on the network at
the same time. With additional traffic on the Internet or private IP network, the
number of simultaneous calls supported by the link is reduced.
If the power goes out, does the VoIP network stay up?
To ensure a reliable network connection, all elements of the VoIP network should be
connected to back-up power supplies (UPS). These elements might include LAN
switches, routers, firewalls, broadband connection devices (ie. cable modems, DSL
modems), and VoIP devices. If the power goes out at the Internet Service Provider,
then no VoIP calls can be made. Calls can still be placed over the regular phone lines.
What happens to VoIP if the IP network fails?
If the connection to the IP network is lost, it will not be possible to make VoIP calls.
Calls can still be placed over the regular phone lines.
I have a firewall and heard that it can prevent VoIP calls from passing through. Is
this true?
The purpose of a firewall is to control what kinds of traffic enter and leave your
network. The TalkSwitch 48-CVA is designed with embedded applications to help
traverse firewalls properly. To allow VoIP calls to pass through your firewall, you
may need to use the port forwarding feature on your firewall.
TalkSwitch 48-CVA by default uses the following ports for VoIP:
Format
RTP (voice):
SIP (signaling): UDP
Type
UDP
Unit 1
6000 - 6006 6010-6016 6020-6026 6030-6036
5060 (This port is mapped to only one unit)
Unit 2
Unit 3
Unit 4
ii
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
What is SIP?
The Session Initiation Protocol (SIP) is a signalling protocol used for establishing
sessions in an IP network. A session could be a simple two-way telephone call or it
could be a collaborative multi-media conference session.
Over the last couple of years, the Voice over IP community has adopted SIP as its pro-
tocol of choice for signalling. SIP is an RFC standard (RFC 3261) from the Internet
Engineering Task Force (IETF), the body responsible for administering and develop-
ing the mechanisms that comprise the Internet.
The IETF’s philosophy is one of simplicity: specify only what you need to specify. SIP
is very much of this mould; it just initiates, terminates and modifies sessions. This
simplicity means that SIP scales, it is extensible, and it sits comfortably in different
architectures and deployment scenarios.
What is a VPN? Can a VPN help me to carry data securely over the Internet?
VPN stands for Virtual Private Network. It is a means of having the advantages of a
private network on a shared public infrastructure like the Internet. A VPN provides
security by using encryption/decryption. Using a process called ‘tunneling’, private
data is encrypted and then encapsulated before being sent across the network. These
packets of information are sent to their destination. Only those with the correct pro-
tocol information are able to enter a company’s network.
A VPN is very useful for providing employees with remote access to the company net-
work without compromising security. Encryption can have a negative impact on the
call quality, as the overhead on the network connection is increased. For example,
IPSec adds approximately 10 per cent overhead to VPN traffic.
What’s the difference between a Public IP Address and a Private IP Address?
A Public IP Address is a globally unique number that identifies a device on the
Internet. If you want someone on the Internet to connect to you, then you must tell
them your public address. Also known as your “real” or “external” address.
Private IP Addresses are typically assigned to devices on a LAN (Local Area Network)
and are not routable outside the LAN. Private IP Addresses are usually in the range
192.168.x.x, 172.16.x.x or 10.x.x.x. These IP addresses are typically used where you
have multiple computers all sharing the same Internet connection.
To access the Internet, a computer or VoIP device must have an IP address. So what
do you do if your ISP (Internet Service Provider) has provided you with only 1 IP
address but you have more than 1 device that requires Internet access? The solution
is to give each of the devices on the LAN a Private IP Address. A router makes them
work by performing Network Address Translation (NAT - See the next topic for
details).
Note that addresses of the form192.168.x.x, 172.16.x.x or 10.x.x.x are not recognized
Download from Www.Somanuals.com. All Manuals Search AInndtrDoodwunlcotaiod.n
iii
on the Internet and can only be used for private networks. For example, if you tell
someone on the Internet to connect to you using a 192.168.x.x address, it will not
work. Instead, you must provide your real/Public IP Address.
What is NAT and how does it affect VoIP?
Network Address Translation (NAT) allows multiple devices to share the same exter-
nal IP address to access resources on the Internet. NAT is typically used to allow all
the devices in a subscriber’s local area network to access the Internet through a router
with a single public IP address assigned by the Internet Service Provider.
If a VoIP device is sitting behind a NAT, the private IP address assigned to it is not
usable for communications with the entities outside the private network. The VoIP
device must substitute the private IP address information with the proper external IP
address/port in the mapping chosen by the underlying NAT to communicate with a
particular public peer address/port. TalkSwitch can automatically check for the cur-
rent public IP address and substitute the private IP address with the public address so
that VoIP traffic is properly routed through the NAT.
What’s the difference between a Static IP Address and a Dynamic IP Address? What
effect does this have on VoIP?
A Static IP Address is an address that is permanently assigned to a device. Typically, a
Static IP Address has to be assigned by the network administrator or Internet Service
Provider (ISP).
A Dynamic IP Address is an address that is temporarily assigned to devices by a DHCP
or PPP server that maintains and assigns a pool of IP addresses.
When deploying VoIP devices, it’s best to have a Static Public IP Address as this pre-
vents destinations from becoming unreachable for periods of time when the IP
address changes. But since this can be an expensive option, TalkSwitch 48-CVA sup-
ports the ability to handle Dynamic Public IP addresses for the Internet connection.
TalkSwitch can automatically check for the current public IP address and substitute
the private IP address with the public address so that VoIP traffic is properly routed
through the NAT.
What is a SIP Proxy and Registrar?
SIP’s basic architecture is client/server in nature. The main entities in the SIP server
are the Proxy, Redirect Server and the Registrar.
TalkSwitch 48-CVA has the SIP Server fully integrated for easy deployment and main-
tenance of your VoIP network. If you are deploying a multi-site configuration which
can comprise of TalkSwitch 48-CVA units, certified 3rd party gateways and certified
3rd party SIP phones, then one TalkSwitch 48-CVA can act as the SIP Proxy and
Registrar. The other SIP end-points will register with this TalkSwitch 48-CVA and all
calls will be negotiated through this TalkSwitch 48-CVA.
iv
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
When you first set up your VoIP device (TalkSwitch 48-CVA, gateway or phone), it will
register itself with the TalkSwitch 48-CVA that is configured as the SIP Server so that
calls can be directed to your location.
When you initiate a VoIP call, your device (TalkSwitch 48-CVA, gateway or phone)
will contact the TalkSwitch 48-CVA that is configured as the SIP Server to obtain the
contact information for the destination you are trying to reach. Once the informa-
tion is received, the call is established directly between your location and the desti-
nation. The SIP Server is no longer involved in the call.
If the location of the SIP Proxy and Registrar has a Dynamic IP Address, then you
will have to use Dynamic DNS since the SIP Server location will be unreachable as
soon as the IP address changes.
What is Dynamic DNS?
Dynamic DNS is a Domain Name Service that is used with Dynamic IP addresses.
DNS is used to allow devices to find other devices on the Internet by name rather than
by IP address. Dynamic DNS allows you to use a domain name - FQDN (which does
not change) to locate a device with a Dynamic IP address.
There are companies on the Internet which can provide you with a DNS Address, even
if your IP address changes. For example www.dyndns.org or hn.org or www.no-
ip.com. You should consult with them about how to use their service. But the basic
idea is that you will receive an address something like myname.homeip.net which
points to your IP address (something like 209.210.230.140). This is important for
loactions where the SIP Server resides and where the public IP address is dynamic.
All other locations will point to this SIP Server’s domain instead of an IP address.
What is the drawback of using Dynamic DNS?
When DNS records are updated, they have to be sent all over the world so that every-
one will be aware of the changes. Basically, one DNS server connects to another and
swaps information. In many cases, the DNS servers are updated very quickly. Updates
should take no longer than 15 minutes to propagate throughout the DNS system. It
is possible that propagation could take longer under extenuating circumstances, but
propagation shouldn’t take much more than an hour at the very most.
How often will my Public IP address change?
This depends on the policies of your Internet Service Provider (ISP, the company that
provides your Internet access). It can be a matter of days, weeks or even months
before your IP address changes. A power loss or reboot to your cable or DSL modem
usually results in the assignment of a new IP address.
TalkSwitch has technology that helps keep this information up to date so that the sys-
tem can function properly after an IP address change has been detected and updat-
ed.
1.0
Download from Www.Somanuals.com. All Manuals Search AInndtrDoodwunlcotaiod.n
v
What is a port number?
In an IP address like 64.26.209.103:5060, the port number is the number after the
colon ‘:’. For this example, 5060 is the specified port.
Port numbers are required so that a computer or device can support multiple appli-
cations or streams of simultaneous data communication. Each stream or application
uses a unique port number. You can think of it like mailing a letter to friend in an
apartment building at a specific address. You need to specify the apartment number
as well as the building address, so that the mail can reach the proper final destina-
tion.
vi
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing
TalkSwitch
2
2.1
What’s included with TalkSwitch
The TalkSwitch 48-CVA comes shipped with the following items:
1. The TalkSwitch Unit
2. AC Power Adapter (Warning: never use any power adapter other than the
one provided.)
3. 6' RJ-45 Ethernet Cable
4. 6' RJ-11 Telephone Cable – (4)
5. CD containing configuration software and documentation
6. Quick Reference Cards
7. TalkSwitch Start Guide
8. TalkSwitch Memory Card (optional)
If any of these items are missing, please contact your TalkSwitch dealer.
The TalkSwitch line jacks are sensitive to high-voltage spikes from lightning. If you live
in an area where electrical storms occur regularly, we recommend that you protect
TalkSwitch by plugging the telephone cords coming from the TalkSwitch line jacks to a
surge protection device connected to the incoming telephone lines.
If you live in an area with cold temperatures, do not plug TalkSwitch into a power outlet
until the system has warmed to room temperature. Otherwise, condensation could
build up on the electronics and cause damage when TalkSwitch powers up.
2.0
Installing TalkSwitch
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2
Front Panel Descriptions
TalkSwitch’s front panel consists of a power button (“Power”) and 5 LED lights that
indicate the usage of the lines with different states of illumination.
What do the LED lights tell you?
LED light:
Line 1
State
Description
On Solid Line 1 is currently in use.
Pulsing Slowly Line 1 caller is on hold.
Flickering
Quick Pulse
Line 1 is ringing.
Line 1 is engaged by a device that is sharing
the line with TalkSwitch.
Line 2
On Solid Line 2 is currently in use.
Pulsing Slowly Line 2 caller is on hold.
Flickering
Quick Pulse
Line 2 is ringing.
Line 2 is engaged by a device that is sharing
the line with TalkSwitch.
Power / Data
On Solid
Flickering
TalkSwitch is powered on.
The PC connected (via Serial or USB) to
TalkSwitch is either sending or retrieving
information from TalkSwitch.
Pulsing Slowly Global Message Waiting Indicator (optional).
Line 3
On Solid Line 3 is currently in use.
Pulsing Slowly Line 3 caller is on hold.
Flickering
Quick Pulse
Line 3 is ringing.
Line 3 is engaged by a device that is sharing
the line with TalkSwitch.
Line 4
On Solid Line 4 is currently in use.
Pulsing Slowly Line 4 caller is on hold.
Flickering
Quick Pulse
Line 4 is ringing.
Line 4 is engaged by a device that is sharing
the line with TalkSwitch.
For more details on line LED error codes, see Troubleshooting - Appendix A
2
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3
Back Panel Descriptions - TalkSwitch 48 CVA
Before connecting all your phones and lines to TalkSwitch, you may want to pro-
ceed with configuring the unit first. (See section 3.1) This will minimize the dis-
ruption time for your telephone lines while setting up the system.
Jacks/Ports
MUSIC
What to plug in
Plug in a radio, CD player, PC soundcard or any other
device that emits an audio signal if you wish to use the
TalkSwitch Music-on-Hold feature. This is a 1/8" (3.5
mm) phono jack. Mono cables are recommended. If you
have multiple TalkSwitch units on a LAN, you will need
to provide a music source to each TalkSwitch.
PA
Connect to a P.A. system if you wish to use the external
paging feature. This is a 1/8" (3.5 mm) phono jack.
Mono cables are recommended. If you have multiple
TalkSwitch units on a LAN, you will need to provide a
connection from each TalkSwitch to the PA Amplifier.
LAN PORT
You can connect to an Ethernet hub using a Category 5
cable with RJ-45 connectors. This will support
configuration across the LAN and Internet and support
VoIP calls. If you have 2, 3 or more TalkSwitch units,
you can ‘network’ them and they will function as a
single system. There are 3 LEDs next to the LAN port. The
top LED is on when the ethernet link is synchronized
with a switch or hub. The middle LED is on when data is
being received and the bottom LED is on when data is
being transmitted.
E1 – E8
Plug in any analog device that uses a standard (RJ-11)
telephone jack, such as telephones, fax machines, inter-
nal or external PC modems, etc. TalkSwitch identifies
the extensions as 1x1 to 1x8. (x represents the unit ID
2.0
Installing TalkSwitch
3
Download from Www.Somanuals.com. All Manuals Search And Download.
number assigned to that TalkSwitch unit). By default,
all TalkSwitch units are shipped with a unit ID of 1. This
means the extensions are 111 to 118. A TalkSwitch with
unit ID 2 would have extensions 121 to 128. For details
on setting up 2 or more units on a LAN to operate as
‘networked’ units, please see section 2.5.
L1/L2, L2, L3/L4, L4
This is where you plug in your RJ-11 telephone lines. If
you have 2 lines out of 1 phone jack, you can plug into
the 1/2 and 3/4 jacks. Use a surge protector if you live
in an area prone to lightning strikes.
USB
Use the USB port if your PC supports USB connectivity. If
you use the USB port, you can’t use the serial port simul-
taneously. *USB to be supported in next release.
SERIAL
Attach a serial cable (RS232) to connect TalkSwitch to
your PC.
MEMORY SLOT
Located on side of box: used to expand internal memory
for Voicemail and Auto Attendant messages. TalkSwitch
Memory cards can be purchased from your local
TalkSwitch reseller or from www.talkswitch.com. Simply
place the memory card in the slot and TalkSwitch will
automatically detect and start using the extra memory
within 20 seconds.
POWER
Plug the supplied AC Power Adapter in here. Rating:
16VAC 1.5 A output. Do not use any other power adapter,
as this may cause damage.
By default, TalkSwitch is set to Serial connection. To activate USB connection, dial
91 from an extension then reset TalkSwitch by turning it off and then on again.
To return to Serial connection, dial
required to use the LAN connection.
90
and reset TalkSwitch. No commands are
The ‘PF’ box in between E4 and L1/L2 represents power failure support. In the event
of a power failure or loss of power to TalkSwitch, Extension 114 will be able to receive
calls and make calls on Line 1.
4
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4
Plugging into the Back Panel
2.4.1 Attaching telephone lines to TalkSwitch line jacks
You can connect your telephone lines from the wall jack(s) to the TalkSwitch line
jacks with the phone cables provided. Take note of which telephone line is connected
to which line jack on TalkSwitch — this information will be used in the
configuration section. In order to minimize disruption to your business, you may
want to configure TalkSwitch first before connecting it to your lines and phones. See
section 3.1 for information about configuring TalkSwitch.
We recommend that you connect surge protectors between TalkSwitch and your
telephone lines to protect against lightning damage.
2.4.2 Attaching phones and other devices to TalkSwitch extension
jacks
You can connect any regular analog telephone, cordless phone, fax machine,
answering machine or modem to TalkSwitch’s extension jacks. Multiple devices can
be connected to each extension jack by ‘chaining’ them together or using a line
splitter.
To attach a single-line corded or cordless telephone, fax machine or answering
machine:
Connect your single-line analog telephone or fax machine to one of TalkSwitch’s
extension jacks (E1 to E8) just as you would if you were plugging them into a
standard telephone wall jack.
To attach a two-line telephone:
Option # 1 (Use it as one TalkSwitch extension.)
Disregard the telephone’s Line 2 jack (plug-in). Connect the telephone’s Line 1
plug-in to any one of TalkSwitch’s extension jacks. You will be able to access both
telephone lines, but in the same manner as a single-line telephone attached to
TalkSwitch.
Option # 2 (Use it as two TalkSwitch extensions.)
You could use your two-line telephone as two separate TalkSwitch extensions.
Connect the telephone’s Line 1 and Line 2 plug-ins to two separate extension
jacks on TalkSwitch.
2.0
Installing TalkSwitch
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Most two-line phones have separate plug-ins for two incoming telephone lines (Line 1
and Line 2). If your two-line telephone does not have separate plug-ins, you can use a
“Line 1/Line 2” line splitter to separate the two lines. Read the Connecting Phones, Faxes
and Devices Quick Guide in the TalkSwitch software or at www.talkswitch.com/support
for more detailed examples on connecting multi-line phones.
To Attach an Internal or External Modem:
Simply plug the modem’s telephone cable into one of TalkSwitch’s extension
jacks. Your modem is now a TalkSwitch extension and will be able to access all
lines and take advantage of TalkSwitch’s call routing features.
If you don’t want to change your dial-up settings for the modem, you will need to
enable Direct Line Access for the extension associated to the modem. See section
3.3.1.4 for more details on configuring Direct Line Access.
2.4.3 Connecting devices to the Music and PA jacks
The Music jack is designed to support any audio source (CD player, radio, tape player,
sound card etc.) for playing music or messages to callers while on hold. Simply
connect the audio source via its headphone output to the Music jack. The Music jack
requires a 1/8" (3.5mm) mono phono connector. If you have more than one
TalkSwitch connected to a LAN, you will need to provide audio to the Music jacks on
each TalkSwitch.
The PA jack can be connected to a PA System for external paging or to an
amplification system to screen voicemail or to use as a line simulator. The PA jack
requires a 1/8" (3.5mm) mono phono connector. If you have more than one
TalkSwitch connected to a LAN, you will need to provide a connection from each
TalkSwitch to the PA system.
2.4.4 Connecting TalkSwitch to a LAN and/or PC
There are currently 3 ways to connect to TalkSwitch for PC configuration – Serial,
USB and over the LAN (Ethernet port).
Serial:
USB:
LAN:
Use a serial cable (RS232) to connect TalkSwitch to an available Serial
COM port on your PC.
Use a USB cable to connect TalkSwitch to an available USB port on
your PC or USB hub. *USB not currently supported.
Use the provided Ethernet cable to connect TalkSwitch to the LAN via
your switch
Internet: The TalkSwitch 48-CVA will support remote configuration from a PC
via IP from a local or remote location. (future update)
6
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.4.1 Connecting TalkSwitch to a PC using a Serial cable
If you have an available Serial port, then connect TalkSwitch to your PC using an RS-
232 Serial cable*. By default, TalkSwitch is shipped with the Serial and LAN ports
enabled and the USB port disabled.
If you were previously using USB and are switching back to Serial connection, then
you will need to switch TalkSwitch back to Serial mode. Pick up a phone connected
to one of TalkSwitch’s local extensions and dial to enter command mode. If you
have an administrator password enabled, enter the password. Dial 90, then
to
enable the Serial connection. Next, turn TalkSwitch off and on again to activate the
Serial connection.
When you run the TalkSwitch software, select ‘PC Connection’ to select Serial as the
connection type then select the COM port associated to this physical Serial port on
your PC.
Make sure you do not have any other communications programs running at the
same time you want to use the TalkSwitch configuration software. These may include
Palm Pilot, Hot Sync, TalkWorks, digital camera software. These programs tend to
‘hold’ onto COM ports, making them unavailable for any other programs.
If you are having problems communicating with TalkSwitch, please check the
Troubleshooting section of the manual.
2.4.4.2 Connecting TalkSwitch to a PC using a USB cable
If you have an available USB port and cable and are not running Windows 2000 or
XP on your PC, then connect TalkSwitch to the PC using a USB cable*. Next, pick up
a phone connected to one of TalkSwitch’s local extensions and dial
to enter
command mode. If you have an administrator password enabled, enter the password.
Dial 91, then to activate the USB connection. Next, turn TalkSwitch off then back
on again to activate the USB drivers.
Make sure you do not have any other communications programs running at the
same time you want to use the TalkSwitch configuration software. These may include
Palm Pilot, Hot Sync, TalkWorks, digital camera software. These programs tend to
‘hold’ onto COM ports, making them unavailable for any other programs.
*cable not provided.
2.0
Installing TalkSwitch
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.4.3 Connecting TalkSwitch to a LAN for local configuration
If you want to connect multiple TalkSwitch units to a LAN, please see section 2.5
To connect TalkSwitch to a LAN for configuration purposes, simply use the supplied
Category 5 cable with RJ45 connectors on either end. Connect TalkSwitch to the
switch. The top LED should light up to indicate a connection has been established
with a switch or hub.
If you are running Windows XP, please make sure you are not using Windows 98
compatibility mode.
Any time TalkSwitch is being configured, it is ‘locked’ so that no other computer or
person using a phone can make configuration changes at the same time. If you leave
the software open for longer than 1 hour, TalkSwitch will automatically unlock itself
to allow configuration changes.
2.5
Using 2 or more TalkSwitch units on a LAN
Networked
If you have only one TalkSwitch unit, ignore this section and proceed to Section 3.
2.5.1 Connecting 2 or more TalkSwitch units to a LAN
We recommend integrating your phone system into your existing LAN with an
Ethernet switch. A switch provides direct communication between TalkSwitch units,
thus keeping the TalkSwitch voice-over-LAN data isolated from other data on the
network.
For example, the Linksys BEFSR81 EtherFast® Cable/DSL Router with 8-Port Switch
is a solution that supports prioritization of traffic at an affordable price.
Connect up to four TalkSwitch units (2 are shown on the following page) to the LAN
switch or switched hub.
8
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.2 Setting the Unit ID for the first time
When TalkSwitch units are shipped from the manufacturer, they are all programmed
with Unit ID 1. If two or more units are placed on the same LAN and have the same
Unit ID number, then there will be a conflict. TalkSwitch identifies this conflict by
flashing all the Line lights on the front panel of the units that have the conflict.
To resolve the conflict, you need to assign a different Unit ID to one or more of the
units. Pick up a telephone handset connected to one of the extension jacks on the
TalkSwitch unit that you want to assign a different Unit ID. You will immediately
hear a system prompt indicating that there is a conflict and a new Unit ID needs to
be chosen. Select an available Unit ID between 2 and 4.
Next, the system should indicate that the update was successful and the front panel
lights should stop flashing after several seconds. When none of the front panel ‘Line’
lights are flashing, then all units are ready for network use.
No IP configuring is required to configure TalkSwitch since it does not use the TCP/IP
protocol for voice traffic over the LAN. IP configuration is however required once the
system has been configured.
2.5.3 Changing the Unit ID
If you need to change the Unit ID of any TalkSwitch system, you can first press
from a Local Extension to enter command mode, enter a password if necessary, then
dial 0 0 The system will respond with the Unit ID of that particular TalkSwitch.
.
To change the Unit ID, use any of the following commands once in command mode:
2.0
Installing TalkSwitch
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit ID
Touch Tone Command
1
2
3
4
01
02
03
04
2.5.4 Unit IDs and how they affect system extension numbers
When more than one TalkSwitch is connected to a LAN and they operate in networked
mode, the extensions and voicemail have different numbers based on the Unit ID
assigned to the TalkSwitch unit they belong to.
The extensions and voice mailboxes affected by the new numbering system are listed
in the following table.
Unit ID 1 Unit ID 2 Unit ID 3 Unit ID 4
Local Extensions
Remote Extensions
111-118 121-128 131-138 141-148
211-218 221-228 231-238 241-248
Local Mailboxes
Remote Mailboxes
General Mailboxes
111-118 121-128 131-138 141-148
211-218 221-228 231-238 241-248
410-419 420-429 430-439 440-449
None of the Extension Ring Groups are affected, since they are global to the entire
system. It doesn’t matter if there is one or four TalkSwitch units on a LAN, there will
always be 10 Extension Ring Groups with the extension numbers 300-309.
2.5.5 Keeping track of the lines and extensions
To keep track of the extensions and lines connected to each TalkSwitch, you may
want to label each unit with its respective Unit ID. This will simplify matters when it
comes to adding or removing extensions and lines.
In the event the TalkSwitch units are located in a room away from the extensions and
you need to identify which unit is which, there is a utility in the configuration
software that will allow you to identify each unit by flashing the lights on the front
panel. When the configuration software is opened, you can check details of the
TalkSwitch units on the LAN by clicking on the ‘LAN Details’ button.
In the pop-up window, you can select a Unit ID, then click the Identify button to have
10
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
the lights flash on that unit. The lights will stop flashing when you click ‘finished’ or
5 minutes have elapsed.
2.5.6 Optimizing the system for networked use
TalkSwitch has been designed to operate optimally when in a networked state. Here
are a few items that have been designed for better network use:
Configuration Settings:
All units are ‘cloned’ with identical settings. In the event that a unit has
‘disappeared’ off the network (adapter unplugged, LAN connection disconnected,
LAN failure etc.), the system can still handle the calls, since it retains the
configuration settings of the ‘missing’ unit. In the event an extension or voice
mailbox cannot be reached, the caller will hear the following system prompt:
“The extension you are trying to reach is currently unavailable, please try again
later.”
Outgoing Line Hunt Groups
By default, when 2 or more units are on a LAN, the system tries placing calls out on
the same TalkSwitch unit the call originates from. This avoids using a line across
the LAN on another unit, which helps to minimize the LAN traffic and optimizes the
opportunity for all inbound calls to connect across the LAN if required.
Auto Attendants
There are a total of 9 Auto Attendants that are shared by all units on the LAN. When
an Auto Attendant is recorded on any unit, it is then automatically copied to all
other units on the LAN. This design minimizes LAN traffic and also provides
functionality back-up in case a unit or units have ‘disappeared’ off the network
(adapter unplugged, LAN connection disconnected, LAN failure etc.). In this event,
all units can still answer inbound calls with the same Auto Attendant messages).
Voicemail
All Local Extension and Remote Extension Voicemail data is stored on the unit
where the extensions normally reside. For example, all greetings, directory names
and voicemail messages for extensions 121-128, 221-228 and mailboxes 420-429
are stored on the TalkSwitch with Unit ID 2. If a unit is completely filled with
voicemail messages, new messages will not be stored on other units. The system
will simply not accept anymore messages for mailboxes belonging to that unit. If
you need more memory, TalkSwitch Memory Cards can be purchased from your
reseller. You can also use the Voicemail Memory Manager to view the memory
usage of each TalkSwitch unit and each mailbox.
2.0
Installing TalkSwitch
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6
Optimizing Your IP Network for VoIP
2.6.1 The Broadband Connection
For optimum quality of VoIP calls on your system, we recommend that you subscribe
to a high-speed broadband connection from your Service Provider. ‘Lite’ broadband
connections (typically 128 Kbps downstream and 64Kbps upstream) are not typically
suitable for simultaneous voice and data traffic. The limiting factor for a broadband
connection is typically the upstream bandwidth to the Internet Service Provider.
For example, if you have a typical 1Mbps ADSL connection from your service provider,
this usually means that you have an upstream bandwidth of approximately 380 Kbps.
Just because the service provider says that you have 380 Kbps upstream bandwidth
does not mean that the full 380 Kbps is available at all times. In fact, a conservative
approach is to estimate about half of the upstream bandwidth as being available. In
this case you could safely support 2 simultaneous G.711 calls or 4 simultaneous
G.726 calls or 10 simultaneous G.729 calls. These estimates do not factor in other
data traffic on the network at the same time. With additional traffic on the Internet
or private IP network, the number of simultaneous calls supported by the link is
reduced. For more information on VoIP calling, see chapter 1.
2.6.2 The Router/NAT/Firewall
In a typical small office environment, there are several computers connected to an
Ethernet switch which is sometimes integrated into a router. A router handles the
connection between 2 or more IP networks. Routers spend all their time looking at
the destination IP addresses of the packets passing through and routing them
accordingly. In a network that shares both data and voice, it is critical that the voice
traffic has priority over the data packets. Some routers support Quality of Service
(QoS) functionality for such purposes. These routers are typically identified as devices
12
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
that support QoS, VoIP or prioritization. One such inexpensive router for the small
office market is the Linksys BEFSR81. It can be configured to provide prioritization
of the voice traffic on the broadband connection to ensure that voice traffic gets
through. It also supports DHCP, UPnP and VPN Pass Through.
TalkSwitch uses UPnP (Universal Plug and Play) to automatically configure port
forwarding VoIP ports, and receive updates whenever the WAN IP address changes so
that it can properly update SIP messages.
2.6.3 The Local Area Network
To share voice and data properly, your network requires an Ethernet switch. A switch,
in effect, isolates the Ethernet ports from each other and only passes through traffic
intended for the device connected to that port, which ensures that data traffic doesn’t
compete with voice traffic. For example, the Linksys BEFSR81 router has a built-in 8
port switch which is perfect for a LAN supporting both TalkSwitch units and
computers. If you’re not certain whether your equipment is an Ethernet switch,
contact the manufacturer.
2.0
Installing TalkSwitch
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring
TalkSwitch
3
3.1
Installing the TalkSwitch Configuration Software
Insert the TalkSwitch CD into your CD drive. The Install program will automatically
launch. If the software does not launch automatically, you can use Windows Explorer
to explore your CD-ROM drive. Double-click the Setup.exe file, then follow the
instructions on the screen. If you are installing on a Windows XP machine, do not
enable Windows 98 compatibility mode for the TalkSwitch software. The TalkSwitch
software can also be downloaded from the TalkSwitch website (www.talkswitch.com).
Configuration software system requirements:
PC running Windows 98/ME/XP/2000
120 MB free hard disk space
64 MB RAM
An available Ethernet port
800 x 600 minimum video resolution
If you are having problems retrieving the settings from TalkSwitch, please check the
Troubleshooting section of the manual.
3.0
Configuring TalkSwitch
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2
Running the TalkSwitch software
After installation is complete, double-click the TalkSwitch icon. If TalkSwitch is
currently connected to the same network as your PC, then the configuration software
should automatically detect and retrieve the settings from TalkSwitch (See section
3.3). If TalkSwitch is not yet connected, or connected via the Serial or USB port, then
the following screen will appear with different configuration options.
Connect via Network:
If TalkSwitch is connected on the same LAN as the PC being used to configure the
system, then use this option. Ensure your network cable is properly connected and
the top green LED is on at the back of the TalkSwitch.
Connect via Serial Port:
If TalkSwitch is connected to the PC via a Serial or USB cable, then select this
option and choose the COM port associated to the connection.
Work Offline - Open File:
If you wish to work offline on a configuration file, select this option then press
the Browse button to select the file you wish to view/edit.
Restore Firmware:
This activates the TalkSwitch Firmware Update procedure. Follow the instructions
accordingly.
16
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3
Configuration
From the Control Center choose Configure. The following screen will appear:
The configuration screen consists of 4 parts:
1
2
5
3
4
1. Menu Items
2. Configuration Navigation
Controls what is displayed in the configuration window.
3. Configuration Window
Displays configuration information.
4. Resize
Grabbing this corner by left-clicking on the mouse allows you to
increase or decrease the window size.
5. View Details
Click this button to view each TalkSwitch unit’s MAC address, IP
address, hardware version and firmware version.
3.0
Configuring TalkSwitch
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Items - File
Open File...
Opens existing configuration files from the PC. Default configuration files
are included with the software. TalkSwitch also backs up to a file called
“LastSavedConfig.dat” every time you save settings to TalkSwitch.
Save to TalkSwitch
Saves the current configuration to TalkSwitch.
Save to file...
Saves the current configuration to a file.
Exit
Closes the Configuration.
Retrieve settings:
Retrieves settings from TalkSwitch connected to the PC.
Update Firmware:
This action locks the system down and then proceeds with updating the
firmware once all calls have terminated. For more details on upgrading the
TalkSwitch Firmware, see Section 4.8.
Menu Items - View
Toolbar
Toggles the toolbar on/off.
Status Bar
Toggles the status bar on/off.
Menu Items - Tools
Memory Usage:
Displays a dialog box showing internal memory usage for Voicemail or Auto
Attendant messages.
Voicemail Manager:
Displays a dialog box giving you options to check the status of all voicemail,
delete a mailbox password, and reset mailboxes to factory default.
18
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminal Window:
Displays a command line interface to enter commands. Useful for
troubleshooting in conjunction with technical support.
Defaults:
Select this option to reset the current page or the entire configuration back to
defaults.
Menu Items - Help
Support on the Web:
Launches your browser and directs you to our support site.
About TalkSwitch:
Displays the TalkSwitch software version number, TalkSwitch firmware version
number and Copyright information.
Additional PDF help documents can be located in the Start Menu> TalkSwitch folder.
Configuration Navigation
The Configuration Navigation organizes all the configuration topics within folders.
The following is a brief description of each configuration folder:
About TalkSwitch
This tab displays version information about the TalkSwitch software, firmware
and hardware. It also displays memory usage with details about voicemail
messages and Auto Attendants.
System Information
This folder allows you to configure the system setup. This includes activating
lines, extensions, VoIP and music-on-hold.
Voicemail
This folder allows you to configure each individual voice mailbox and also some
global settings for the voicemail system.
Call Handling
This folder allows you to configure how you want incoming calls to be handled.
It allows you to setup your Auto Attendants and individual call handling for each
line and distinctive ring number for both operating modes.
Call Back / Call Bridge
3.0
Configuring TalkSwitch
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TalkSwitch’s Call Back and Call Bridge features are configured from this folder.
Both of these features can reduce your company expenses by reducing long
distance costs.
Options
In this folder, advanced settings are configured including audio controls,
troubleshooting and various operating options.
Configuration considerations when connecting multiple units to a LAN.
Networked
When 2 or more units are connected to a LAN and are set up for network use, you will
have the ability to configure all units connected to the LAN via the Serial or USB
connection to one of the TalkSwitch units, or a PC connected to the same LAN as the
TalkSwitch units.
When 2 or more TalkSwitch units are connected to the same LAN, they are designed
to act like a single phone system. For example, if you have 2 TalkSwitch units
connected on the same LAN, the system will now function as a single system
supporting 8 lines, 16 local extensions and 16 remote extensions.
You will notice that on some of the configuration pages, there will be up to 4 tabs
across the top that allow you to select each TalkSwitch in the group.
Important:
Anywhere in this manual where there are details specific to the use of TalkSwitch in a
networked configuration, you will see the icon to the left. For people using only 1
TalkSwitch unit, you can ignore any of the comments associated with this icon.
Networked
20
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.1 System Information
3.3.1.1 Administration
This tab allows you to assign a System name and Administrator password for
TalkSwitch. The Administrator password gives access to all configuration options.
The password that is entered here will be used at configuration start-up and through
Touch Tone configuration.
System Name:
For tracking purposes, a system name can be assigned. The name can also be
configured to appear as Caller ID information for all outgoing calls.
System Password:
To activate the use of a system password, enter a 4- to 8-digit password. The
password can only contain numbers, since it is also used to gain access to the
system using a touch-tone phone.
If you do not want a password, or want to delete the existing password, simply
clear the password field and click ‘Ok’.
If the administrator forgets the password, the only option to gain access to the
configuration settings is to contact Centrepoint Technologies Technical Support.
3.0
Configuring TalkSwitch
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.1.2 IP Configuration
In order for the TalkSwitch 48-CVA to function properly, an IP address and other
pertinent information is required.
In the “System IP Settings” section:
If you have a DHCP server and your TalkSwitch unit(s) are connected to the
LAN, then all fields should already be filled with the correct information. If
there is no DHCP server present, the following fields need to be filled in if you
plan on using the VoIP capabilites of the TalkSwitch 48-CVA.
Box X IP Address:
Assign an available static IP address to each TalkSwitch unit. If you use a DHCP
server, you need to reserve an IP address for each TalkSwitch unit. To reserve an
IP address, you will need the MAC address of each unit. See the begining of
section 3.3 for details on checking the MAC address.
Subnet Mask:
Enter the subnet mask for the LAN. If you have a DHCP server running, then this
information will automatically be obtained.
22
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Default Gateway:
Enter the IP address of the gateway on your network. A gateway is a hardware
device (such as a router / NAT) that connects the office network to the Internet.
The gateway allows you to share a DSL, cable modem or other Internet
connection with all of the computers and IP devices in your office network.
Preferred DNS Server:
Enter the preferred DNS server IP address. This is also known as the primary DNS
server. DNS is a service that maintains information about a portion of the Domain
Name System (DNS) database and responds to DNS queries for resolving a domain
name to an IP address. For more information about DNS, see chapter one.
Alternate DNS Server:
Enter the alternate DNS server IP address. This is also known as the secondary
DNS server.
Verify / Apply IP and DNS information:
Press this button to instantly apply the settings.
In the “Public IP Address” section:
Type of public IP address for Internet Connection:
Select dynamic if your public IP address is a dynamic IP address from your
Internet Service Provider (ISP). If you are unsure if your connection is dynamic
or static, then leave this option set to ‘dynamic’. When set to dynamic, TalkSwitch
checks your public IP address every 5 minutes. If it changes, TalkSwitch
automatically updates its information so that VoIP calls are properly handled.
Current public IP address:
When ‘dynamic’ has been selected for the public IP address type, this entry shows
the current public IP address and is not editable. If the public IP address is
‘static’, then you will need to enter it here.
Public IP address-checker server name:
When ‘dynamic’ has been selected for the public IP address type, this entry shows
the current server name for the IP checker utility. If the public IP address type is
‘static’, then no information is required.
3.0
Configuring TalkSwitch
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.1.3 VoIP Configuration
This section deals with configuring your TalkSwitch for VoIP
In the “TalkSwitch Profile” section:
TalkSwitch has a built-in SIP Server Proxy / Registrar / Redirect server. This
facilitates the configuration and maintenance for multi-branch and teleworker
applications. One location needs to be assigned as the SIP Server so that it can
manage call requests between VoIP locations and the other locations need to
register with the SIP Server location.
To facilitate calling between TalkSwitch locations, we recommend that you use
TalkSwitch location codes 250-299 as phone numbers for each of your VoIP
Lines. Ensure no duplicate numbers are assigned between any 2 locations.
This TalkSwitch location is the Proxy / Registrar
If this location is going to be the Proxy / Registrar Server, then check this box.
When enabled and other SIP devices are registered with this system, then any
calls made within the group contact this device to resolve the destination
location. Once the destination is resolved, the call is made directly from the
source location to the destination location.
24
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Proxy Server Location:
If this location is acting as the Proxy Server, then this information will be
automatically filled in. If this location is not the Proxy Server, then enter the IP
address or domain name associated to the Proxy Server.
Registrar Server Location:
If this location is acting as the Registrar Server, then this information will be
automatically filled in. If this location is not the Registrar Server, then enter the
IP address or domain name associated to the Registrar Server. If a TalkSwitch 48-
CVA is acting as the Server, then both the Proxy Server Location and Registrar
Server Location fields should have the same information.
Networked
Realm:
Enter the Realm information if required for authentication with a 3rd party SIP
Server. Realm information is not required for TalkSwitch registration.
Group Name:
If this location is the Proxy/Registrar and you have enabled authentication, then
assign a group name to this unit. If this unit is not the Proxy/Registrar, then it
must have the same group name filled in if authentication is required from the
Proxy/Registrar Server.
Password:
If this location is the Proxy/Registrar and you have enabled authentication, then
assign a password to this unit. If this unit is not the Proxy/Registrar, then it must
have the same password filled in if authentication is required from the
Proxy/Registrar Server.
In the “Firewall / NAT Traversal” section:
TalkSwitch supports UPnP (Universal Plug n’ Play) to facilitate firewall / NAT
traversal by automatically mapping ports to itself and keeping track of the public
IP address. If a UPnP compatible firewall / NAT is detected on the LAN, then this
detection will be indicated in this section. Click the Details button for more
information.
3.3.1.4 Telephone Lines
This section tells TalkSwitch about the telephone lines plugged into its back panel.
Simply select a line and fill in the information. For each line there is a status message
(“Line detected at initialization”) indicating if TalkSwitch detected a line plugged
into the associated line port. If a line is plugged into a line port and is not detected,
check your telephone line, and then choose File>Retrieve Settings to update the
screen.
Networked
3.0
Configuring TalkSwitch
25
Download from Www.Somanuals.com. All Manuals Search And Download.
If networked, you will need to configure the options for all the units. At the top of the
window, select the tab for each TalkSwitch units (labeled ‘TalkSwitch 1’, ‘TalkSwitch 2’,
etc...) and follow the instructions below.
In the “Phone numbers” section:
Enter the ‘main’ telephone number for the appropriate line connected to
TalkSwitch. Enable the Distinctive Ring Numbers 1 and/or 2 if you have this
service on the current line and wish to have incoming calls handled ‘differently’
on the basis of the distinctive ring. If you want Distinctive Ring numbers handled
the same way as your ‘Main’ number, do not place a check mark in the box.
Next, enter the ‘Distinctive Ring’ telephone number for each of the Distinctive
Ring numbers associated to this line. Distinctive Ring 1 corresponds to any
double ring pattern. Distinctive Ring 2 corresponds to any triple ring pattern.
In the “Telephone company services” section:
Select any of the Telephone Company Services that you currently have for each
line. The following is an explanation of each service and the impact of selecting
each option on how TalkSwitch handles calls. For definitions and further details
on how to use these features with TalkSwitch, see Appendix B.
26
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Way Calling/Conference:
TalkSwitch can work with either service to forward calls to Remote
Extensions or other external phone numbers while using the same line
(Same Line Connect). You can also use this service as an option for
bridging calls to external numbers when calling into TalkSwitch from
the outside. If you find that you are having difficulties with line
volume levels when forwarding calls to Remote Extensions or using
Call Bridge, you should use 3-way calling to forward calls as a solu-
tion.
Transfer and Clear (Centrex/Plexar transfer):
TalkSwitch can clear the line after forwarding a call to a Remote
Extension if your telephone line supports this feature. If you enable
this feature without actually having the service, callers will be
disconnected when TalkSwitch attempts to forward their call to the
Remote Extension.
Call Waiting:
Check this box if you have Call Waiting service on the current line. It
is strongly recommended that you remove this service from your
line(s), since there is no way for TalkSwitch to answer a second call
on the same line while it is handling the first call. You may instead
want to consider adding the Hunt/Rollover service to your lines.
Caller ID:
Check this box if the current line provides Caller ID information.
TalkSwitch will pass along the Caller ID information to the selected
extensions. Also, TalkSwitch can use the time information provided by
Caller ID to update TalkSwitch’s internal clock. (see section 3.3.5.4).
Telephone Company Voicemail:
Check this box if you are subscribed to a Telephone Company
Voicemail service.
Hunt/Rollover/Busy Forwarding:
Check this box if the current line is associated with a Line Hunt or
Line Rollover service from the Telephone Company. In general, any
lines that belong to a Hunt/Rollover group should be configured to
handle calls the same way.
3.0
Configuring TalkSwitch
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.1.5 VoIP Lines
Networked
The TalkSwitch 48-CVA supports 4 VoIP lines per unit. Up to 3 phone numbers can be
assigned to each of the 4 lines so that unique call handling scenarios can be
configured for up to 12 numbers. For example, you might assign a general number
for customers to reach the main Auto Attendant greeting and configure up to 11 other
numbers so that the inbound calls ring straight through to specific extensions in the
office.
In the “Phone numbers” section:
All VoIP Lines are active when the system is first configured. Up to 3 phone numbers
can be assigned to each VoIP line for internal calling. Phone numbers need to be
assigned so that inbound VoIP calls can be handled according to the configuration
parameters set for VoIP lines under the Call Handling section. Phone numbers can
be 3 or more digits in length.
Phone numbers 250-299 have special functionalitiy with TalkSwitch. These numbers
can be directly dialed from any extension or Auto Attendant and will be automatically
routed via VoIP to the destination that has the number assigned to one of its ports.
An administrator should keep track of all phone numbers assigned to each location
to prevent duplicate numbers being assigned to multiple locations. We recommend
that you use these numbers as it will facilitate calling from extensions and the Auto
Attendants.
28
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Busy Forwarding Options:
This section allows you to configure how inbound calls are handled for each port
when it is busy. You can click ‘Assign ports’ to assign ports for busy forwarding
when the port associated to this phone number is busy. This feature is similar to
the phone company’s Rollover/Busy Forwarding service. By default this feature is
enabled so that the maximum number of inbound calls can be handled by the
system at any one time.
3.3.1.6 Line Hunt Groups
There are a total of 9 Line Hunt Groups for controlling outbound call line selections.
These Line Hunt Groups are used by the Local and Remote Extensions, and when
using the Call Bridge feature. Each Hunt Group can support several line choices and
will attempt to grab an available line in the order that they are listed (Lines to hunt)
for that Hunt group. These settings have no effect on incoming calls.
Default setup:
Hunt Group 9:
selects any available telephone line
Hunt Group 81: selects telephone Line 1
Hunt Group 82: selects telephone Line 2
Hunt Group 83: selects telephone Line 3
Hunt Group 84: selects telephone Line 4
Hunt Group 88: selects any available VoIP line
First select a Line Hunt Group then enter a useful name for identifying this hunt
group elsewhere in the configuration software.
Under Set Line Hunt Group, select the Line Type. If you wish to use this hunt group
3.0
Configuring TalkSwitch
29
Download from Www.Somanuals.com. All Manuals Search And Download.
for accessing telephone lines, then select 'Phone Lines'. If you wish to use this hunt
group for accessing VoIP lines, then select 'VoIP Lines'.
Under Set Line Hunt Group, select the lines you wish to add to the Hunt Group by
simply checking the box next to the line.
If you have multiple TalkSwitch unit connected to the LAN, then a checkbox will be
present and enabled so that outbound calls will always hunt the lines on the unit
where the extension is connected to minimize network traffic between units.
3.3.1.7 Fax Information
The information in this tab helps configure TalkSwitch to handle faxes.
If you have a dedicated fax line or a Distinctive Ring number for faxing associated to
a line, please choose this ‘Fax number’ in the list. If you don’t have a line dedicated
for inbound faxing, select ‘none’.
If you do not see your fax number in the list, make sure you have activated the
appropriate line or Distinctive Ring number in the Telephone Lines section under
System Information. See section 3.3.1.4.
Next, select the extension number where you have your fax device connected. For
30
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
example if you have your fax machine connected to E8 on the rear of TalkSwitch
unit 1, then select extension number 118.
If your fax machine is connected to E8 on a TalkSwitch with Unit ID 2, then the fax
extension number is 128. If you have a dedicated fax line or number, your fax machine
should be connected to an extension jack on the same TalkSwitch unit where the fax
line/number is connected.
By default, when both a dedicated line and fax extension have been selected for the
first time, the software automatically configures the incoming call handling
properties for that line to ring only the fax extension you have specified.
3.3.1.8 Local Extensions
Local Extensions are phones or devices connected to any of the extension jacks at the
back of TalkSwitch. See sections 1.3 and 1.4 for more details on connectivity.
If you have 2 or more TalkSwitch units connected on a LAN, you will be able to select
the tabs associated to each unit and see the extensions associated to that unit. If a
TalkSwitch48-CVA unit has a Unit ID of 2, then the Local Extensions will be 121 to 128.
The second digit for all Local and Remote Extensions, Local, Remote and General
voicemail represents the Unit ID of the associated TalkSwitch unit.
Networked
3.0
Configuring TalkSwitch
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Select any of the extensions that you wish to configure.
Local Extensions are by default activated with the associated Voice mailbox. Voice
mailboxes for each Local Extension can be de-activated in the Voicemail section in
the System Information folder.
Last Name / First Name:
Enter the first and last name of the person associated to the extension. The last
name is required if the person is to be included in the ‘Dial by Name’ directory
listing used by the Auto Attendant. The person using that extension must also
record their name for the directory by following the instructions below the name
fields. The name entered will also appear on the Caller ID of other Local
Extensions during intercom calls.
For outbound VoIP calls, use this number:
Select the number you want to appear at the remote location when VoIP calls are
placed from this extension. If ‘Default VoIP Number’ is selected, then the phone
number associated to the outgoing VoIP port will be used. This selection makes
the most sense if your VoIP lines have been configured to handle all inbound
calls in the same manner.
32
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Line Access:
Direct line access allows you to configure the extension to access a specific Hunt
Group automatically for outbound calls when the extension goes off hook. For
example, you may have a fax machine connected to this extension and don’t
want to reprogram the speed dial phone numbers. In this case you would select
‘Direct line access’ and choose the appropriate Hunt Group. As soon as the fax
goes off hook, TalkSwitch will hunt the specified lines for an available line. This
feature allows users to avoid dialing extra digits to access a line.
Warning: When using Direct Line Access, telephone company line dialtone is first
available when picking up the handset. The following features are only available from
TalkSwitch internal dialtone: Intercom Calling, Hold Retrieve, Line Hunt Groups,
Voicemail Retrieval/Access, Call Pick Up, P.A. Access, Parked Call Retrieval, Do Not
Disturb functions and entering Command Mode. To obtain internal dialtone at an
extension which has Direct Line Access enabled, dial Flash after going off hook.
Hunt Group Access:
This is used if you want to permit or restrict specific Hunt Group access to the
extension. Click the button and simply organize the appropriate Line Hunt
Groups that are permitted for this extension. (Extensions are defaulted to have no
restrictions.)
3.3.1.9 Remote Extensions
With TalkSwitch’s Remote Extensions, you can have calls forwarded directly from
your office to any phone number you choose. Your cell phone, pager or any out-of-
office number becomes a ‘Remote Extension’ of your office system. You can choose
to screen callers if required. If you are unavailable or choose not to accept calls, they
can be transferred back to your office (e.g. to voicemail or another extension) or
forwarded to another out-of-office telephone number (e.g. to a business partner’s cell
phone) depending upon the Call Cascade configuration.
Networked
For details on how to use Remote Extensions, see section 4.3
Once your remote extensions are configured, calls can be forwarded by the Auto
Attendant or transferred by someone in your office simply by dialing the Remote
Extension number. There are 8 Remote Extensions available per TalkSwitch unit.
If a TalkSwitch has Unit ID 2, then the Remote Extension numbers are 221 - 228. Unit
ID 3 has remote extensions 231-238, and Unit ID 4 has 241-249
3.0
Configuring TalkSwitch
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose a Remote Extension to configure. You must enter a phone number in order
for the extension to be considered active and usable by the system.
Remote phone number:
Enter the phone number of the Remote Extension (note: no specific prefixes are
required other than area codes for long-distance calls - put the number in just as
though you were dialing it from a regular phone). You may use the following in
the space provided: digits 0 - 9, space, comma, dash, and
.
Last Name / First Name:
Enter the first and last name of the person associated to the extension. The last
name is required if the person is to be included in the ‘Dial by Name’ directory
listing used by the Auto Attendant. The person using that extension must also
record their name for the directory following the instructions listed below the
name fields.
Connect using:
Select the Line Hunt Group that TalkSwitch will use to connect the Remote
Extension. This is advantageous if you have an inexpensive long-distance plan
set up for the lines in Hunt Group 84, you may want to use this Hunt Group for
your long-distance Remote Extensions.
34
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Same Line Connect
Enabling this option allows incoming calls, when forwarded to the Remote
Extension, to use the same line in which the originating call came in. Using this
feature allows only one line to be used when forwarding incoming calls to a
Remote Extension. This feature can only be used when the line that the
originating call came in on has the 3-Way Calling/Conference or Transfer service
(Centrex/Plexar). If the line does not have any of these services, the call will be
forwarded using the Hunt Group chosen in the “Connect using:” section.
If you have a ‘Transfer and clear’ service on your line(s) and want to have
TalkSwitch clear lines after forwarding calls to Remote Extensions, you will need
to enable ‘Clear telephone line after call transferred’ on the Transfer Options page
under ‘Options’. If your service requires the remote end to answer the call before
the transfer can be made, then you should use ‘play accept/reject prompt’ or ‘play
caller’s name first’ screening option set on the ‘Answered at ext.’ in the Remote
Extension section under Call Handling. Check with your telephone company if
you are uncertain which setting works best for you.
Note: Remote Extensions do not have the ability to manually transfer calls
when using ‘Same Line Connect’.
35
3.0
Configuring TalkSwitch
Download from Www.Somanuals.com. All Manuals Search And Download.
When using Same Line Connect, callers will hear silence while they are on hold, since
the callers are on hold at the Telephone Company and not at TalkSwitch. If you want
callers to hear music while they are on hold for calls forwarded to Remote Extensions,
do not use Same Line Connect. It’s best to experiment with different settings in order
to decide what works best for your configuration.
3.3.1.10 Extension Ring Groups
There are a total of 10 Extension Ring Groups available for your use. Ring Groups
are extensions 300 to 309. By default, extension 300 is configured to ring all
extensions.
Different uses for Extension Ring Groups:
Send calls to specific groups of employees: For example, if you have a company
with several departments, you can configure Extension Ring Group 300 for the
Sales Department, to ring extensions 111, 112, 113, and 114. Ring Group 301
might be for Technical Support, ringing extensions 115 and 116.
Identify types of calls by different ring patterns: You are the president of a
company and you don’t want to handle calls from the general public, yet you
want to be alerted when important colleagues try to contact you. Your regular
Local Extension may be 111 for most people, but you can also configure a Ring
Group such as extension Ring Group 300 to ring your extension with a different
ring pattern. You then tell your colleagues to choose extension 300 at the Auto
Attendant or ask to be transferred to extension 300 when speaking to someone in
the office. Now without being subscribed to Caller ID, you can tell just by how
your phone rings if you consider the caller to be important or not.
First select an Extension Ring Group (300-309) that you would like to configure and
activate it.
In the “Set Ring Group” section:
Select each extension that you wish to add to that Ring Group. Repeat this process
for each of the Extension Ring Groups you want to activate.
Ring pattern:
Choose how you want the phone(s) to ring for the Ring Group.
36
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.1.11 On-hold/ Ringback
If you wish to have callers listen to music or advertising while they are on hold, you
will need to enable Music-on-hold in this tab.
On-Hold Settings:
If you have a music source connected to the MUSIC jack, then you can select the
‘play music’ option. Otherwise leave the option set to play a ‘double beep’ when
callers are placed on hold.
Transfer Settings:
Select whether you would like callers to hear ringing or, if you have a music
source connected, music while they are being transferred.
Note: If you connect a music source to the Music jack and do not enable Music-on-
hold, the caller will hear both music and a beep sound when on hold. Also when the
caller makes a selection at the Auto Attendant to go to an extension that has call
screening enabled, they will hear both ringing and music.
If you have more than one unit connected to the LAN, you will need to provide a music
source to all units with lines connected. A 1/8” audio splitter can usually be obtained
at most electronics stores.
3.0
Configuring TalkSwitch
37
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.2 Voicemail
This section deals with the internal voicemail system included with TalkSwitch. It
allows you to activate Local, Remote and General mailboxes and to change global
settings to the voicemail system. For details on how to use voicemail, see section 3.4.
Networked
3.3.2.1 Local Extension Voicemail
By default, all Local Extensions are activated with an associated voice mailbox. If you
want to use a local extension mailbox for informational purposes only and prevent
callers from recording messages, then check the ‘Play announcement only’ box.
Remote Phone Notification:
If you want to be notified at another location when new messages arrive, you
can use Remote Phone Notification. Simply enter the phone number of the
cell phone, pager or location where you want to be notified.
Notification Settings:
Select Notification Settings to specify how you want TalkSwitch to handle
notification calls.
Pager Notification:
Use Pager Notification if you want to be notified by pager when new messages
arrive. Simply activate the feature then enter the pager phone number and
the numeric message to be displayed on the pager.
38
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial notification phone number:
These parameters control which Hunt Group is used for both the Remote
Phone and Pager Notification calls. It also allows you to adjust the number
of rings before it will abort the attempt then follow the parameters listed in
the next section.
If attempt unsuccessful:
These parameters control how many times TalkSwitch will try to notify the
Remote Phone or Pager before it will abort the entire notification attempt.
You can also specify the time interval between attempts.
3.3.2.2 Remote Extension Voicemail
Remote Extension voicemail is similar to the Local Extension voicemail.
If you want to use a remote extension mailbox for informational purposes only and
prevent callers from recording messages, then check the ‘Play announcement only’
box.
3.0
Configuring TalkSwitch
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Phone Notification:
If you want to be notified at another location when new messages arrive, you
can use Remote Phone Notification. Simply enter the phone number of the
cell phone, pager or location where you want to be notified.
Notification Settings:
Select Notification Settings to specify how you want TalkSwitch to handle
notification calls.
Pager Notification:
Use Pager Notification if you want to be notified by pager when new mes-
sages arrive. Simply activate the feature then enter the pager phone number
and the numeric message to be displayed on the pager.
Dial notification phone number:
These parameters control which Hunt Group is used for both the Remote
Phone and Pager Notification calls. It also allows you to adjust the number
of rings before it will abort the attempt then follow the parameters listed in
the next section.
If attempt unsuccessful:
These parameters control how many times TalkSwitch will try to notify the
Remote Phone or Pager before it will abort the entire notification attempt.
You can also specify the time interval between attempts.
3.3.2.3 General Voicemail
General Voicemail is similar to both Local and Remote Extension Voicemail. If you
want to use a general mailbox for informational purposes only and prevent callers
from recording messages, then check the ‘Play announcement only’ box.
Remote Phone Notification:
If you want to be notified at another location when new messages arrive, you
can use Remote Phone Notification. Simply enter the phone number of the
cell phone, pager or location where you want to be notified.
Notification Settings:
Select Notification Settings to specify how you want TalkSwitch to handle
notification calls.
Pager Notification:
Use Pager Notification if you want to be notified by pager when new messages
40
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
arrive. Simply activate the feature then enter the pager phone number and
the numeric message to be displayed on the pager.
Dial notification phone number:
These parameters control which Hunt Group is used for both the Remote
Phone and Pager Notification calls. It also allows you to adjust the number
of rings before it will abort the attempt then follow the parameters listed in
the next section.
If attempt unsuccessful:
These parameters control how many times TalkSwitch will try to notify the
Remote Phone or Pager before it will abort the entire notification attempt.
You can also specify the time interval between attempts.
2.3.2.4 Global Settings
Any changes made to Global Settings will affect all system voice mailboxes.
Global Message Waiting Indicator:
This option can be useful if you use only a limited number of voice mailbox-
es. Anytime a new message is left in any active voice mailbox, the Power/Data
light will pulse very slowly to indicate that there is at least one new message
in one of the mailboxes. Once all new messages have been heard, this light
will return to the default state of being on solid.
3.0
Configuring TalkSwitch
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Mailbox Settings:
The first option controls the order that messages are played back when lis-
tening to voicemail. The default setting plays messages back starting with the
newest message and working back to the oldest messages. This setting is con-
venient since many people store several saved messages and don’t want to
skip through these messages every time they want to listen to newer messages.
The second option controls whether the system pages or calls your remote
phone for every new message received in voicemail or only the first new mes-
sage received in voicemail.
Remove blank and hang up messages automatically:
Enable this option if you tend to get several messages where callers hang up
rather than leave messages. The advantage of not clearing the short messages
is that users can listen to the Caller ID information played at the end of the
message to identify callers*.
*Caller ID service required from your telephone company.
View Mailbox Data:
Details are provided for each voice mailbox and announcement. This tool is
useful for better managing the voicemail resources of the system.
42
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset Mailboxes:
Use this feature if, for example, an
employee has left the company and
all greetings, messages and settings
for a particular mailbox need to be
reset. If you need to simply delete a
password, use the Voicemail
Manager located under ‘Tools’ in the
menu bar.
3.3.3 Call Handling
3.3.3.1 Modes
The use of Modes allows you to run different call handling configurations at different
times. For example, you may want calls handled one way during business hours and
another way for non-business hours. Modes can be switched either manually or
automatically with the use of Automatic Mode Switching.
Name the modes if desired. The names will be displayed elsewhere in the
configuration software whenever modes are used.
To use the Automatic Mode Switching feature, you must first activate it by clicking
‘Use Automatic Mode Switching’. Next, set the start times for each mode. If you want
TalkSwitch to change modes more than twice in one day, you can activate up to two
extra mode changes.
3.0
Configuring TalkSwitch
43
Download from Www.Somanuals.com. All Manuals Search And Download.
If you do not want to use Automatic Mode Switching, you can still switch modes
manually in the software or through any telephone using touch tone commands.
Enter command mode by dialing
then your password if required. Next, dial any
to confirm.
Changes TalkSwitch to mode 1
Changes TalkSwitch to mode 2
TalkSwitch tells you what mode it currently is using
of the following commands followed by
31
32
30
3.3.3.2 Auto Attendant
The Auto Attendant greets callers and tells them which number(s) they should press
on their telephone keypad to reach a particular extension, person, message, or
department. Callers can also directly dial Local Extensions (1xx), Remote Extensions
(2xx), Extension Ring Groups (300-309), Voicemail (to both leave messages and
access messages), access Call Back, access Call Bridge and enter Command mode for
making changes to the system configuration.
400 series mailboxes can be dialed at the Auto Attendant without having to press
first. This can be useful for providing ‘virtual’ extensions associated to a mailbox for
telecommuters or other part-time staff.
44
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
A total of 9 different Auto Attendants can be recorded or loaded with a combined total
time of 30 minutes (shared with voicemail. Memory can be expanded up to 5 hours
using TalkSwitch Memory cards). You do not have to use or record all 9 Auto
Attendants.
When 2 or more units are networked, they share the same 9 Auto Attendants. When
an Auto Attendant message is recorded on any TalkSwitch unit, it is automatically
copied to all the other TalkSwitch units on the same LAN. This feature helps reduce
network traffic and allows any system to continue functioning even if another unit loses
power or is disconnected from the LAN.
The Auto Attendants can be recorded from any Local Extension or remote phone with
touch-tone commandes.
Recording Auto Attendant messages:
Pick up any Local Extension or dial into TalkSwitch. At the Auto Attendant,
enter command mode by pressing . If you have the Administrator password
enabled, you need to enter it. Next, begin entering the touch tone commands
listed on the next page. TalkSwitch will promt you through the recording.
3.0
Configuring TalkSwitch
45
Download from Www.Somanuals.com. All Manuals Search And Download.
After entering a command, you will need to press
before entering another command or exiting command mode. To exit
command mode, press or hang up.
to confirm the entry
Auto Attendant
Record message
Playback message
Erase message
1
2
3
4
5
6
7
8
9
41
42
43
44
45
46
47
48
49
51
52
53
54
55
56
57
58
59
041
042
043
044
045
046
047
048
049
Example:
1. Press to enter command mode, then dial 4 1
2. After the tone, record your Auto Attendant message. Press when you have
.
finished.
3. Press 5 1 to listen to your recording.
Note: If you have the Administrator password enabled, you will need to enter this
password after you hit
the first time to enter command mode.
Recording Auto Attendants from an out-of-office phone:
1. Dial into TalkSwitch and wait for the Auto Attendant message.
2. Once the Auto Attendant is playing, use the same keypad commands as you
would from a TalkSwitch extension (as listed above). If you have Password
Protection enabled, you will be prompted for your password.
In the “At the Auto Attendant, perform the following actions:” section:
If the caller selects
‘0’:
In general, the ‘0’ option is used to direct callers to a receptionist. You may
want to configure this option to ring a Local Extension. For an after hours
Auto Attendant, you might want to use this option for forwarding to a Remote
Extension for emergency purposes or simply direct callers to a voice mailbox.
46
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
If the caller selects
‘
1
’, ‘
If the caller presses ‘
TalkSwitch can perform one of several actions:
- perform no action:
2
’, ‘
3
’, ‘
4
’ or ‘
5’:
1
’, ‘
2
’, ‘
3’, ‘
4’ or ‘5’ at the specified Auto Attendant,
If you don’t want to use a particular option, then set it
to perform no action.
- go to voice mailbox: You can configure any single digit option to send a
caller immediately to voicemail. Select the appropriate mailbox or ‘new’ to
create a new mailbox if required.
- go to local extension: You can provide a single-digit option to ring a par-
ticular extension, as opposed to 3 digits.
- go to remote ext.: You can provide a single-digit option to ring a particu-
lar remote extension, as opposed to 3 digits.
- go to ring group: you can provide a single-digit option to ring an exten-
sion as opposed to 3 digits.
- go to auto attendant: TalkSwitch can direct callers to multiple levels of
auto attendants. For example, you might want to use your main auto
attendant to provide language options such as “press 1 for English, 2 for
Spanish.” Then you configure option 1 to go to auto attendant 2 (English
version) and option 2 to go to auto attendant 3 (Spanish version).
- queue at ring group: Similar to Uniform Call Distribution, this directs
calls to a group of extensions and keeps callers on hold until a member of
the ring group is free to take the call.
- play announcement: Announcements are useful for providing directions,
business hours or other information. You can inform callers that they can
press to return to the previous greeting.
- go to directory: If you want callers to be able to locate employee extension
numbers by last name, then enable this option for one of the selections.
Note: TalkSwitch waits 1.5 seconds after your caller inputs a digit for another digit to
follow it. If another digit is not received, then TalkSwitch will follow the action set for
the single digit. This allows caller to use, for instance, both “1” for the auto atten-
dant option and “111” as an extension number.
If a fax call is detected:
If TalkSwitch detects a fax call (by CNG detection, which is identifying the
tones emitted by a fax), it has the ability to route it to a Local Extension or if
you do not want to use fax detection, you can have TalkSwitch perform no
action.
3.0
Configuring TalkSwitch
47
Download from Www.Somanuals.com. All Manuals Search And Download.
After the Auto Attendant has finished playing and no selection has been
made within x seconds:
If no selection is detected at the specified Auto Attendant, TalkSwitch can
route the call to any Local or Remote Extension, Ring Group, Voice
mailbox, Auto Attendant, Announcement, dial by name directory, queue the
caller or simply hang up. This feature is included in case someone does not
have a touch-tone phone or if it is a fax call where the calling fax machine
does not emit a CNG tone. It can also be used to forward calls immediately
after the Auto Attendant answers the call. You can specify the length of time
after the Auto Attendant has finished playing before it performs the ‘no selec-
tion’ action.
Fax calls are detected by a series of beeps called a CNG tone. If a fax machine sends
this tone while trying to establish a connection to a fax machine connected to
TalkSwitch, TalkSwitch will handle the call accordingly. Not all fax machines emit a
CNG tone, and as a result, TalkSwitch will not be able to detect those fax calls and
route them to the fax machine. To guarantee the reception of every fax, we recommend
the use of a ‘Distinctive Ring Number’ added to one of your lines for fax calls.
TalkSwitch can then handle every fax call consistently.
The digits 6, 7, 8 and 9 are not available as programmable options, since they are
used for other system features:
If 6 is dialed:
If you press ‘6’ at the Auto Attendant, you will be able to configure and use
Auto and Prompted Call Back. See section 2.3.4 for more details about con-
figuring Call Back and section 3.7.2 for details on using Call Back.
If 7 is dialed:
TalkSwitch uses 7 to precede PBX extensions of another Centrex or PBX sys-
tem. If TalkSwitch is not connected to another system, 7 is inactive. If
TalkSwitch is connected to another PBX system, see section 2.3.5.4 for more
details.
If 80 - 88, or 9 is dialed:
If you press ‘80 - 88 or 9’ at the Auto Attendant, you will access Call Bridge if
it has been permitted. See section 2.3.4.3 for more details on configuring Call
Bridge and section 3.7.1 for details on how to use Call Bridge.
48
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilities for Auto Attendants:
Record Instructions:
Selecting this button displays a dialog box
showing the instructions on how to record
and playback an Auto Attendant using a
telephone. No adjustments are required
for the recording volume, as TalkSwitch
automatically adjusts the recording
volume for optimal recordings. If you
find that the playback of your Auto
Attendant messages are too low, you can
adjust the playback volume on the Audio
Controls page located under ‘Options’.
Load Auto Attendant:
Selecting this button
displays a dialog box with
instructions on how to load
an Auto Attendant using a
pre-recorded .wav file. If
you want to have Auto
Attendants professionally
recorded, make sure you
specify that the files need to
be 8KHz, 8bit, mono, and
saved as a mu-law format
.wav file.
Erase Instructions:
Selecting this button displays a dialog
box showing the instructions on how
to erase an Auto Attendant using a
telephone. It is a good idea to erase
any unused Auto Attendants, since
they share the same memory as
voicemail.
3.0
Configuring TalkSwitch
49
Download from Www.Somanuals.com. All Manuals Search And Download.
View Auto Attendant Memory Usage:
Select this option from the Tools menu then
Memory Usage to view the amount of time
used by all of the Auto Attendants. This
feature helps you keep track of memory
usage, as you may have unused Auto
Attendant messages that can be deleted to
free more memory.
3.3.3.3 Telephone Lines
This section deals with how TalkSwitch will handle incoming calls based on the
incoming line and ring cadence (distinctive ring numbers).
First, select a line to configure. Then select the appropriate mode for which you want
TalkSwitch to use these settings. If you entered the phone number in the Telephone
Lines section under System Information, the number will appear on the
corresponding button.
50
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Auto Attendant:
If you wish to have the Auto Attendant answer calls to give callers options, select
the appropriate Auto Attendant and number of rings before the Auto Attendant
answers. The caller will always hear one more ring than the number of rings you
select, since TalkSwitch uses the first ring to determine the ring type and support
Caller ID information.
Ring extensions only (no Auto Attendant is played):
If you don’t want the Auto Attendant to answer calls on this line, select this
option. By default, all the Local Extensions are set to ring immediately during an
inbound call. If you select this option, no Call Cascade actions (such as
voicemail) can be performed.
Sending Calls to voicemail without going to the auto attendant: If you require a
‘fall through’ sequence, such as going to a voice mailbox after X rings, set Auto
Attendant 9 to answer calls after ‘x’ number of rings, and select the extensions
you want to ring before the Auto Attendant answers. Next, configure Auto
Attendant 9 as follows:
1) Make sure nothing has been recorded for Auto Attendant 9. At internal dial tone,
you can dial and (password if required) 049 to ensure nothing is there.
2) Configure the ‘If no selection is made after ‘x’ seconds’ option to go to the
voice mailbox you desire and select ‘0 seconds’ for the timing.
Now when you don’t answer a call within the number of rings programmed, the
call will be answered by Auto Attendant 9. Since nothing has been recorded, the
call will immediately go to the specified voice mailbox. (See the previous section
for details on configuring Auto Attendants)
Note: if you call on any line, TalkSwitch will answer after 15 rings with a generic
Auto Attendant so that you can still access the system to make configuration
changes, change modes, access voicemail or dial extensions.
Extensions to ring on an incoming call (before Auto Attendant answers):
Select the Local Extensions you would like to ring before the Auto Attendant
answers. By default, all activated Local Extensions will ring. If you require certain
extensions to ring in a sequence, i.e. one extension rings first, then another on
the 2nd ring, click the “Adjust Sequence” button to configure.
Remember: Callers will only be directed according to settings for an Auto Attendant
first. Calls will not follow the Call Cascade settings of any of the Local Extensions
programmed to ring before the Auto Attendant answers.
3.0
Configuring TalkSwitch
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust Sequence:
This section controls how the extensions will ring before the Auto Attendant
answers the call.
• If you have chosen the Auto Attendant to answer calls immediately, this
section does not require configuration and will be greyed out.
• If the Auto Attendant is set to answer after 1 or more rings, you can then con-
figure when specific extensions will ring before the Auto Attendant answers.
• If no Auto Attendant is chosen to answer on the specified line, then you can
specify when particular extensions will ring up to 9 rings. Remember that no
calls will go to voicemail unless you first have an Auto Attendant answer.
3.3.3.4 VoIP Lines
This section deals with how TalkSwitch 48-CVA will handle incoming VoIP calls.
First, select a VoIP line to configure. Then select the appropriate mode for which you
want TalkSwitch to use these settings. If you entered the phone number in the VoIP
Lines section under System Information, the number will appear on the
corresponding button.
52
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Auto Attendant:
If you wish to have the Auto Attendant answer calls to give callers options, select
the appropriate Auto Attendant and number of rings before the Auto Attendant
answers. The caller will always hear one more ring than the number of rings you
select, since TalkSwitch uses the first ring to determine the ring type and support
Caller ID information.
Ring extensions only (no Auto Attendant is played):
If you don’t want the Auto Attendant to answer calls on this line, select this
option. By default, all the Local Extensions are set to ring immediately during an
inbound call. If you select this option, no Call Cascade actions (such as
voicemail) can be performed.
Sending Calls to voicemail without going to the auto attendant: If you require a
‘fall through’ sequence, such as going to a voice mailbox after X rings, set Auto
Attendant 9 to answer calls after ‘x’ number of rings, and select the extensions
you want to ring before the Auto Attendant answers. Next, configure Auto
Attendant 9 as follows:
1) Make sure nothing has been recorded for Auto Attendant 9. At internal dial tone,
you can dial and (password if required) 049 to ensure nothing is there.
2) Configure the ‘If no selection is made after ‘x’ seconds’ option to go to the
voice mailbox you desire and select ‘0 seconds’ for the timing.
Now when you don’t answer a call within the number of rings programmed, the
call will be answered by Auto Attendant 9. Since nothing has been recorded, the
call will immediately go to the specified voice mailbox. (See the previous section
for details on configuring Auto Attendants)
Note: if you call on any line, TalkSwitch will answer after 15 rings with a generic
Auto Attendant so that you can still access the system to make configuration
changes, change modes, access voicemail or dial extensions.
Extensions to ring on an incoming call (before Auto Attendant answers):
Select the Local Extensions you would like to ring before the Auto Attendant
answers. By default, all activated Local Extensions will ring. If you require certain
extensions to ring in a sequence, i.e. one extension rings first, then another on
the 2nd ring, click the “Adjust Sequence” button to configure.
Remember: Callers will only be directed according to settings for an Auto Attendant
first. Calls will not follow the Call Cascade settings of any of the Local Extensions
programmed to ring before the Auto Attendant answers.
3.0
Configuring TalkSwitch
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust Sequence:
This section controls how the extensions will ring before the Auto Attendant
answers the call.
• If you have chosen the Auto Attendant to answer calls immediately, this
section does not require configuration and will be greyed out.
• If the Auto Attendant is set to answer after 1 or more rings, you can then con-
figure when specific extensions will ring before the Auto Attendant answers.
• If no Auto Attendant is chosen to answer on the specified line, you can speci-
fy when particular extensions will ring up to 9 rings. Remember that no calls
will go to voicemail unless you first have an Auto Attendant answer.
54
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.3.5 Local Extensions - Call Cascade
This section configures the incoming Call Cascade options for the Local Extensions.
The Call Cascade routing options are only engaged if the extension is chosen from
the Auto Attendant or if a call is manually transferred to the extension. Once a call
enters an extension’s Call Cascade sequence, the extension “owns” the call. It will not
follow any other extension’s options, even if that extension is chosen in the Cascade
sequence—what you see in an extension’s Cascade sequence is exactly what you’ll
get. You can set up the Call Cascade sequences differently for both scheduling modes
(the scheduling for these modes are set up on the Modes tab).
Even if a call is manually transferred to a Local Extension that is busy, TalkSwitch
will follow the Call Cascade options for that extension.
For Local Extensions, there are 4 different ‘Call Cascade’ situations; Busy at
extension, No answer at extension, Answer at extension (routing when a call is
rejected) and Do not Disturb (when turned on at an extension). For each of these
situations, you can control how and where you want the incoming call to the
extension handled with up to 3 ‘cascade’ destinations available.
1. Busy at extension - routing options when this extension is busy:
Cascade options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, Voicemail, Announcement, Auto
Attendant, play busy tone (for example: used if a fax machine is at the exten-
sion), queue caller, or hang up. For more information on these
features, see chapter 4.0 - Using TalkSwitch.
3.0
Configuring TalkSwitch
55
Download from Www.Somanuals.com. All Manuals Search And Download.
2. No answer at ext. - routing options when this extension does not answer
after a specified number of rings:
Cascade options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, built in Voicemail, Announcement,
Auto Attendant or keep ringing.
3. Answered at ext. - routing options when this extension ‘rejects’ a screened
call:
Selecting ‘play caller’s name first’ will prompt callers, when they choose this
extension at the Auto Attendant, to record their name. When you answer the
call at the extension, it will announce the caller (by playing their recording),
at which time you can choose to accept the call by pressing or reroute the
call to the Cascade options on this tab by either hanging up or pressing
.
Routing options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, Voicemail, Announcement, Auto Attendant
or hang up. In the case where ‘hang up’ is selected, TalkSwitch will first play
the following prompt before hanging up: “I’m sorry, that extension is
unavailable at this time. Please try again later.”
4. Do not Disturb - routing options when this extension has engaged the ‘Do
not Disturb’ feature:
The Do not Disturb feature is toggled on or off by dialing 62 from a Local
Extension handset. Cascade options include forwarding calls to a Local
Extension, Remote Extension, Extension Ring Group, Voicemail,
Announcement, Auto Attendant or hang up. When Do not Disturb is enabled,
you will hear “Do not disturb on” before the dialtone as a reminder since no
calls will ring through to your extension. You may still dial during this
prompt.
In the Cascade sequence, only choosing an extension (Local, Remote or Ring Group)
will allow you to choose an option in the next selection. Any other selection is
considered an end-of-call option. Note as well that the last selection in the Cascade
sequence only allows the choice of an ‘end-of-call’ option. This is done so the chance
of a caller being “looped” within the system is removed.
Adding selections to a Call Cascade that are not yet configured:
If while configuring the Cascade sequence you require a Local Extension, Remote
Extension, Ring Group, Voice mailbox or Announcement that has not been
activated as yet, you can easily add the required selection by choosing ‘new’. If
chosen, a dialog box will appear that will allow you to configure the required
item. Simply fill in the required information to add the new option to the
selectable list.
The information given in the ‘Add new...’ screens will be reflected within their respective
56
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
sections. For example, if you add a new Remote Extension (let’s say 211), when you
go to the Remote Extensions section, you will see that extension 211 has the
information you added in the ‘Add new Remote Extension’ screen. You will also note
that not all the information displayed in the extension tabs is available in the ‘Add
new...’ screens. This is because only the information that effects the original extension’s
Call Cascade functionality is offered.
3.3.3.6 Remote Extensions - Call Cascade
This section allows you to configure the incoming Call Cascade options for the
Remote Extensions. The Call Cascade routing options are only engaged if the
extension is chosen from the Auto Attendant or if a call is manually transferred to the
extension. Once a call enters an extension’s Call Cascade sequence, the extension
“owns” the call. It will not follow any other extension’s options, even if chosen in the
Call Cascade sequence—what you see in an extension’s Call Cascade sequence is
exactly what you’ll get. You can set up the Call Cascade sequences for both modes
(the scheduling for these modes are set up in the Modes tab).
For Remote Extensions, there are 3 different ‘Call Cascade’ options. For each of these
options, you can control how and where you want the incoming call to the extension
handled.
3.0
Configuring TalkSwitch
57
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Busy at extension - routing options when this extension is busy:
Cascade options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, Voicemail, Announcement,
Auto Attendant, play busy tone or hang up. Note: If this is a remote extension,
such as a cell phone, that has its own voicemail or a phone company prompt
that answers calls when the line is busy, TalkSwitch will assume the call has
been answered and will not follow through with the Call Cascade. You may
want to consider using the ‘Play accept/reject prompt’ option under the
Answered at ext. tab, which specifies that the call to this extension will not be
considered answered until the call recipient enters the appropriate digit.
2. No answer at ext. - routing options when this extension does not answer
after a specified number of rings:
Cascade options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, Voicemail, Announcement or Auto
Attendant, keep ringing or hang up. If you have cell phone voicemail or a
phone company message that answers after a specified number of rings, and
you want the calls redirected to TalkSwitch voicemail, please ensure you set
the number of rings in this section to a number less than the cell phone
company voicemail or system prompt.
3. Answered at ext. - routing options when this extension ‘rejects’ a call:
With Remote Extensions, you have the choice between two different Call
Screening methods, ‘play accept/reject prompt’ and ‘play caller’s name first’.
‘Stay connected’ is the default setting, which means that as soon as the
remote phone number is dialed, the call is connected. The ‘play accept/reject
prompt’ option results in TalkSwitch saying “This is call forward” when the
remote extension answers. Selecting ‘play caller’s name first’ will have
TalkSwitch prompt callers to announce their name. When the call is
answered at the extension, TalkSwitch will announce the caller (by playing
the recorded name). After hearing either message, the Remote Extension can
choose to accept the call by pressing or reroute the call to the Call Cascade
options on this tab by either hanging up or pressing . Routing options
include forwarding calls to a Local Extension, Remote Extension, Extension
Ring Group, Voicemail, Announcement, Auto Attendant or hang up.
If you select ‘stay connected’, the Call Cascade options are greyed out.
TalkSwitch can only control forwarded calls when prompting is enabled. Also,
if you use one of the prompted methods for this Remote Extension, and you
have Music-on-hold enabled, and are not using 3-way calling to forward calls
to this Remote Extension, the Call Cascade will be seamless to the caller, as they
will only hear music throughout the entire process of trying to locate you.
58
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
If a call is forwarded to a Remote Extension from a Call Cascade sequence and has
either ‘play caller’s name first’ or ‘play accept/reject prompt’ enabled, the Remote
Extension will hear “This is Call Cascade...” instead of “This is Call Forward...”. This is
done so that you know when the call is rejected, it will send the caller to the next Call
Cascade option of the extension that forwarded the call and not follow the Remote
Extension’s ‘Answer at ext.’ Call Cascade options.
3.3.3.7 Extension Ring Groups - Call Cascade
The following section configures the incoming call routing options for Ring Groups.
The Call Cascade routing options are only engaged if the Ring Group has been
chosen from the Auto Attendant or if a call has been manually transferred to the Ring
Group. Once a call enters a Ring Group’s Call Cascade sequence, the Ring Group
“owns” the call. It will not follow any other extensions options, even if that extension
is chosen in the Call Cascade sequence - what you see in a Ring Group’s Call Cascade
sequence is exactly what you’ll get.
For Ring Groups, there are 3 different Call Cascade options. For each of these options,
you can control how and where you want the incoming call handled with up to 3
‘cascade’ destinations available. You can set up the Call Cascade sequences for both
Modes (the scheduling for these modes are set up on the Modes tab).
3.0
Configuring TalkSwitch
59
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Busy at extension - routing options when all the extensions in the Ring
Group are busy:
Cascade options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, built in Voicemail, Announcement,
Auto Attendant, play busy tone, queue caller or hang up.
2. No answer at ext. - routing options when all the extensions in the Ring
Group do not answer after a specified number of rings:
Cascade options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, Voicemail, Announcement,
Auto Attendant, keep ringing or hang up.
3. Answer at ext. - routing options when any of the extensions in the Ring
Group ‘rejects’ a screened call:
Selecting ‘play caller’s name first’ will prompt callers (when they choose this
Ring Group at the Auto Attendant) to record their name. When you answer
the call at a Ring Group extension, it will announce the caller (by playing
their recording), at which time you can choose to accept the call by pressing
or reroute the call to the Cascade options on this tab by either hanging up
or pressing . Routing options include forwarding calls to a Local exten-
sion, Remote Extension, Extension Ring Group, Voicemail, Announcement,
Auto Attendant or hang up.
3.3.4 Call Back / Call Bridge
Working together, Call Back and Call Bridge act as your personal long distance
operator. Whether you are across town or around the world, you can place calls from
your office telephone or VoIP line(s), accessing your long distance savings plan.
You can make a direct call to TalkSwitch, activate Call Bridge and enter the telephone
number you want to dial. TalkSwitch dials the number from your office telephone or
VoIP lines and connects the two calls together (the call you made to TalkSwitch and
the call TalkSwitch made from your office to the dialed party).
60
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Here is how it works:
Step 1:
Call
your
TalkSwitch telephone
number to activate
Call Back, then hang
up.
Step 2: TalkSwitch calls you
back
within
10
seconds. You answer
and accept Call Back.
Your Auto Attendant will
play or if you have
none recorded, the
TalkSwitch message will
play.
Step 3: You can now access
any TalkSwitch extension,
voice mailbox or use Call
Bridge to make calls
around the globe just as
if you were sitting in your
own office.
There are two ways to activate Call Back:
1. Auto Call Back - Auto Call Back is immediate and eliminates the initial long
distance call charge required to activate Call Back. When using Auto Call Back,
all the Call Back settings must be pre-configured before Call Back is activated.
To use Auto Call Back activation, simply dial your office telephone number, let
the call ring twice and then hang up. Call Back is instantly activated.
3.0
Configuring TalkSwitch
61
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Prompted Call Back - Prompted Call Back offers the convenience of
entering or changing your Call Back telephone number and message each
time Call Back is activated. To use Prompted Call Back activation, simply dial
your office telephone number. When the Auto Attendant answers your call,
you dial ‘6’ to access the Call Back settings through a series of prompts which
allow you to:
a) Enter the telephone number where you would like TalkSwitch to
call you.
b) Record an ‘Announced’ message if required. Call Back will be
activated right after you initiate Prompted Call Back and hang up.
It is important to remember that a small initial long
distance charge will be incurred at your current location when
activating Prompted Call Back.
By default, Prompted Call Back is not activated in the TalkSwitch configuration. You will
need to activate Prompted Call Back before you can use this feature.
The call back out of the system to the number programmed always uses the same line
that was dialed.
3.3.4.1 Auto Call Back
62
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
There are 4 Auto Call Back numbers that can be configured. Choose an Auto Call
Back to configure and then activate it.
Number to call back:
Enter the Call Back number. This phone number should be entered exactly as you
would normally have to dial the number from this line (i.e. do not enter a Line
Hunt Group in the dialing string).
Use dialing prefix:
If you usually have to dial the same prefix when using Auto Call Back (for
example a long distance calling card number), you may want to enable ‘Use
dialing prefix’. Enter the dialing prefix including any required pauses or feature
keys such as or . The corresponding key for inserting a 2-second pause is
the comma. For example, if you want to disable Call Waiting and want to dial a
long distance prefix before dialing the long distance number you could enter the
following:
*70,1010555,, This corresponds to
70 for disabling the
Call Waiting feature, a 2 second pause to wait for the new dialtone,
then 1010555 for the long distance prefix, and a 4 second pause to
wait for the new dialtone before dialing the actual long distance
phone number.
This saves you the hassle of having to enter the same prefix every time you want
to set up an Auto Call Back phone number.
Number used to trigger Auto Call Back:
Select the line/phone number that you will be dialing when out of the office to
trigger this Auto Call Back. TalkSwitch will initiate the Call Back using the same
line you initially called. You can make configuration changes to this Auto Call
Back by dialing into this phone number only.
Use Password on Call Back:
This option is designed to give you security and to restrict who can use this
particular Call Back number. Simply fill in a 4- to 8-digit password for the Call
Back. When TalkSwitch calls you back, you will be prompted to input the
password to accept Call Back.
Use Announced Message:
This option is recommended if the number TalkSwitch will be calling back is to
a hotel or a location where somebody else will be answering the call. The
Announced Message option allows you to record a message that plays when the
call is initially answered during a Call Back. For example, you may want to say
“Please transfer this call to Bob in room 307”.
3.0
Configuring TalkSwitch
63
Download from Www.Somanuals.com. All Manuals Search And Download.
The Announced Message can be recorded locally using an extension handset or
remotely by accessing Call Back from the Auto Attendant. The Record message
button gives the instructions as follows:
Pick up a telephone handset connected to the TalkSwitch and use the
following keypad commands to record the specific Auto Call Back
Announced Message:
1) Press to enter command mode. If required, enter the
password.
2) Next, enter the appropriate command as listed below. After each
command, press to confirm the entry.
Auto Call Back
Recording
Playback
1
2
3
4
61
62
63
64
71
72
73
74
There are 4 Auto Call Back accounts per TalkSwitch unit. If you need to record an
Announced Message for a particular Auto Call Back account, it must be on the same
TalkSwitch unit as the account.
If you need to configure and/or record an Announced Message from a remote location
and do not have the Auto Attendant set to answer this Call Back line, you can call your
Call Back number and let it ring 15 times. A generic Auto Attendant will answer and
you can configure Call Back by pressing 6.
Allow Call Bridge:
To allow Call Bridge after a Call Back has been accepted, check the Allow Call
Bridge box. You may also restrict the Call Bridge line access by choosing the
Hunt Group Access button. By default, Call Bridge is enabled when Call Back is
activated. You will not be prompted for another password when you choose a
Hunt Group at the Auto Attendant.
When entering a Call Back phone number using a telephone, you can enter special
characters using a special prefix. The default prefix is the
dialing string you will need to dial , for a 2 second pause dial
, dial . When you have completed the entire dial string, dial
key. To enter a
in a
0, and for a
.
64
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.4.2 Prompted Call Back
If you are travelling to a location where you do not yet know the phone number,
you can use Prompted Call Back to save on your long distance charges. For details
on using Call Back, see section 4.7.2.
Number to call back:
This phone number should be entered exactly as you would normally have to dial
the number from this line (do not enter a Line Hunt Group in the dialing string).
TalkSwitch will Call Back out on the same line the call originated.
When you access Prompted Call Back from out of the office, you may change this
number before initiating a Prompted Call Back. This is the benefit of Prompted Call
Back—you do not need to preset the number before you leave the office.
Use dialing prefix with Call Back number:
If you usually have to dial the same prefix when using Prompted Call Back (for
example a long distance calling card number), you may want to enable ‘Use
dialing prefix with Call Back number’. Enter the dialing prefix including any
required pauses or feature keys such as
or . The corresponding key for
inserting a 2-second pause is the comma. For example, if you want to disable Call
Waiting and want to dial a long distance prefix before dialing the long distance
number you could enter the following:
3.0
Configuring TalkSwitch
65
Download from Www.Somanuals.com. All Manuals Search And Download.
*70,1010555,, This corresponds to 70 for disabling the Call Waiting
feature, a 2 second pause to wait for the new dialtone, then 1010555 for
the long distance prefix, and a 4 second pause to wait for the new
dialtone before dialing the actual long distance phone number.
This saves you the hassle of having to enter the same prefix every time you want
to set up a Prompted Call Back phone number.
When entering a Call Back phone number using a telephone, you can enter special
characters using a special prefix. The default prefix is the
dialing string you will need to dial , for a 2 second pause dial
. When you have completed the entire dial string, dial
key. To enter a
in a
0, and for a
, dial
.
Use password on Call Back:
This option is designed to give you security and to restrict who can use Prompted
Call Back. Simply fill in a 4- to 8-digit password, and when TalkSwitch calls you
back, you will be prompted to input the password to accept Call Back.
Use Announced message:
As was described in the Auto Call Back section, this option is recommended if the
number TalkSwitch will be calling back is to a hotel or a location where
somebody else will be answering the call. The Announced message option allows
you to record a message that plays when the call is initially answered during a
Call Back. For example, you may want to say “Please transfer this call to Bob in
room 307”.
The Announced Message can be recorded locally using an extension handset or
remotely by accessing Call Back from the Auto Attendant. The Record message
button gives the instructions as follows:
Pick up a telephone handset connected to the TalkSwitch and use the
following keypad commands to record the Prompted Call Back
Announced Message:
1) Press to enter command mode. If required, enter the password.
2) Next, enter the appropriate command as listed below. After each
command, press to confirm the entry.
To record message: 65
To playback message: 75
Allow Call Bridge:
To allow Call Bridge after a Call Back has been accepted, check the Allow Call
Bridge box. You may also restrict the Call Bridge line access by choosing the Hunt
Group Access button.
66
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The call back number shown will always be the last number TalkSwitch dialed in the
last Prompted Call Back session.
3.3.4.3 Call Bridge
Call Bridge is a useful feature for saving money while using Call Back or on its own
to avoid inflated long distance rates, such as with cell phones.
How to use Call Bridge:
1. Call into TalkSwitch from any out-of-office telephone.
2. At the Auto Attendant message, dial the Hunt Group you know you have the
account password for, (let’s say it’s 9—the default) you will then be prompted
for the account password.
3. Dial the password and then the key to access a TalkSwitch telephone line.
4. At this point you can dial a number as though you were sitting in the office.
There are four Call Bridge accounts for each TalkSwitch unit activated by
passwords. Each account can be configured to allow access to certain Hunt
Group(s) when using Call Bridge.
3.0
Configuring TalkSwitch
67
Download from Www.Somanuals.com. All Manuals Search And Download.
To activate an account, check the ‘Activate Call Bridge’ box and fill in a 4- to 8-digit
password. Next, select ‘Hunt Group Access’ and assign the Hunt Groups you want to
make available for this account.
Call Bridge account passwords are only valid when using Call Bridge by itself, not when
used in conjunction with Call Back.
3.3.5 Options
3.3.5.1 Audio Controls
This section deals with the adjustment of volume and system gain controls. All the
controls on this page update TalkSwitch in ‘real time’. This allows you to adjust
levels during a conversation without having to first save the configuration to
TalkSwitch.
Line Controls:
If you need to increase or decrease the volume of conversations through the
system, you can adjust the gain for each line individually. By default, the settings
compensate for any loss created by TalkSwitch and a portion of the loss created
by your lines. If you have problematic lines or high-loss lines, you may need to
68
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
further increase the gain for each line. We recommend that you adjust the gain
for each line separately, as the characteristics of each line may vary. These
controls only affect the volume heard by the caller.
Extension Controls:
These controls can be used to increase or decrease the volume level of calls and
system prompts heard at each extension.
VoIP Codec Selection:
By default, all 3 codecs are active and the default codec is G.729 (approximately
20Kbps bandwidth). If, for example, you have a ‘lite’ version of a broadband
service, then you would not have enough bandwidth to support G.711
(approximately 100Kbps bandwidth) or G.726 (approximately 50Kbps
bandwidth) codecs, as a ‘lite’ connection typically has only enough bandwidth to
support G.729. In this case, you should uncheck the G.726 and G.711 codecs so
that the system will not attempt to use these codecs when setting up a call.
Otherwise using these codecs could cause one side of the call to sound ‘choppy’
since the broadband connection cannot handle the required bandwidth.
3.3.5.2 Transfer Options
This section deals with actions TalkSwitch makes when calls are transferred
manually.
3.0
Configuring TalkSwitch
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring a caller to a Local Extension, Remote Extension or Ring Group:
Here, you can specify how transferred calls are handled if their target—a local
extension, remote extension or ring group—is busy or doesn’t answer. You have
the choice of TalkSwitch either ringing back the extension that transferred the
call or performing the “no answer” or “busy” action of the extension that the call
was intended for. Any changes made in this section affect the entire system.
Transfer and clear:
TalkSwitch has the ability to clear lines or VoIP ports after a call has been
transferred. Ensure you have this service/feature activated on your line(s) or VoIP
device.
Transferring from a Home phone:
You can transfer a call from a phone connected in parallel to one of the incoming
TalkSwitch lines (your home phone, for instance, if you have a home-based
business) to a Local or Remote Extension, Extension Ring Group, an
Announcement, or a Voicemail box. This section allows you to choose which
transfer prefix you would like to use to perform the action. The transfer prefix
‘wakes up’ TalkSwitch and can be considered the equivalent of the Flash or Link
action at a Local Extension. By default the prefix is
Example: Let’s say you receive a call on a phone in your home that is not an
extension of TalkSwitch and you want to transfer the caller to Remote
Extension 215. You would then dial , wait for the ‘double beep’ then dial
.
215 and hang up. TalkSwitch will now handle the call. For more details, see
section 4.2.8.
Remote Transfer:
Calls that are transferred to a Remote or VoIP Extension, can be transferred back
to another extension or voice mailbox by dialing to place the caller on
hold, then entering the extension or mailbox number. If this is set to Allow
screening of calls, then you would dial
want to cancel the transfer, then dial
4 to complete the transfer. If you
5. If you have selected ‘Perform a
blind transfer’, then the call will be automatically transferred and the line
released once the extension or mailbox number has been entered.
This feature can only be used when forwarding call to a Remote Extension or VoIP
location over 2 lines. This feature cannot be used with 3-Way Calling or Centrex
Transfer services.
70
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.5.3 Miscellaneous
All of the following options affect TalkSwitch as a system. Adjust them according to
your needs.
Caller in queue reminder:
When a caller is in queue at an extension already in use, a reminder tone is
played at the extension to let them know they have a caller in their queue. This
option allows you to turn this function off.
Call Back ring return:
You can adjust the number of rings during a Call Back session before TalkSwitch
disengages the Call Back (i.e. hangs up). Depending upon the situation, you may
want to give yourself more time to pick up and accept the Call Back by increasing
the number of rings.
If being used with another PBX
This feature can only work with PBXs that use “flash-hook” as a transfer method. Please
contact your PBX manufacturer for transfer details.
3.0
Configuring TalkSwitch
71
Download from Www.Somanuals.com. All Manuals Search And Download.
PBX extension length:
If TalkSwitch is being used as an Auto Attendant with another PBX, you
can set the number of digits the PBX uses for its extensions. This allows
TalkSwitch to know what digits to pass on to the PBX to complete the
transfer.
Setting up TalkSwitch behind an existing PBX:
1. Connect the PBX extension to one of TalkSwitch’s Line jacks. You may do this
with all your TalkSwitch lines (1 PBX extension per line) depending upon
how many Auto Attendant ports you would like on the PBX.
2. Configure incoming calls on your PBX to ring the extensions you have
allocated to the TalkSwitch Lines.
3. Configure TalkSwitch’s Auto Attendants to answer after x rings (answer
immediately is used most commonly).
4. Record your Auto Attendants. The Auto Attendants should list the extensions
with the digit 7 in front of them.
Example: If you have chosen the PBX extension length to be 3 digits (and let’s
say John Doe’s extension is 111 on the PBX), the Auto Attendant should say "To
speak with John Doe, press 7111…". Now when 7111 is dialed, TalkSwitch puts
the caller on hold and transfers the caller to extension 111.
Internal clock setting:
TalkSwitch can obtain time information from Caller ID for its internal clock. If
you have indicated that you do have Caller ID on any of the lines, this option
defaults to the active position. If it is de-activated, TalkSwitch can obtain its time
information from the time and date set in the ‘Mode’ tab under Automatic Mode
Switching. TalkSwitch’s clock information is used for Automatic Mode
Scheduling and for internal Caller ID information when intercom calls are
placed in the office.
Internal Caller ID options:
TalkSwitch has the ability to generate name and number Caller ID to each
extension during intercom calls. If your Caller ID unit/telephone does not
support the name option, you can choose to have TalkSwitch send the number
only.
72
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.5.4 Troubleshooting
The following controls should not be changed unless you are familiar with the effect
they will have on TalkSwitch’s operation. If your system does not appear to be
functioning properly, please contact your dealer for assistance.
Flash Lengths
Accepted Flash Length:
These options control the allowable Flash length from a Local Extension that
TalkSwitch will consider to be an intentional Flash. The range can be adjust-
ed to accept anything from 50ms to 1 second. The default range for accepting
a Flash signal at a Local Extension is between 200 ms and 800 ms. Most
phones emit a 600 ms Flash signal when the ‘Flash’ or ‘Link’ button is pressed.
Transmitted Flash Length:
This option controls the transmitted Flash length from TalkSwitch to the
Telephone Company lines. TalkSwitch emits a Flash when forwarding or
bridging calls using the 3-Way Calling/Conference or Centrex Transfer serv-
ice, or when transferring calls through an existing PBX system. The value can
be adjusted from 50 ms to 900 ms. The default setting is 400 ms. If you notice
that you are having problems with any of the TalkSwitch features that use 3-
way calling, you may want to experiment with this value.
3.0
Configuring TalkSwitch
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Double Flash time:
When two flashes are detected, TalkSwitch needs to calculate the time between the
flashes to establish if they were intended to propagate a flash at the CO or if it was
the intention to place a call on hold and then quickly retrieve it. The Double
Flash time values signify the maximum time between two flashes that TalkSwitch
will recognize as an intended flash to the CO. When two flashes are detected with
a time gap larger than the value displayed, no flash will be propagated at the CO.
The value can be adjusted from 200ms to 2000ms with the default set at 1200ms.
3-Way Calling wait time:
This option adjusts the time required between flash hook and a dial string. Some
telephone company 3-Way Calling/Conference services require different time
allowances after the flash signal to re-establish dial tone. The default time is 2
seconds so TalkSwitch can let the lines settle after going off hook before sending
the DTMF digits.
Non-detection of disconnect-clear:
This option controls the length of time after which TalkSwitch will “drop” a line
when silence is heard. This safeguard is useful when a telephone line does not
send out the disconnect-clear signal that tells TalkSwitch the call is finished.
Auto Attendant Adjustments:
Since TalkSwitch allows callers to dial 100, 200, 300 series extensions and 400
series mailboxes, and also allows fall-through options for the single digits 1, 2, 3,
4 and 5 at the Auto Attendant, there needs to be a time limit placed on how long
after the first digit is pressed TalkSwitch will wait for another digit before
following the single digit option. There are 3 ways to make use of this control.
You should be careful not to isolate your callers from having both choices as
listed in (1).
1) With the current setting, callers can dial any Local Extension (1xx), Remote
Extension (2xx), or Ring Group (3xx) as long as the second digit is pressed
within 1.5 seconds of pressing the first digit. Callers can also press just 1, 2, 3, 4
or 5. for options and when TalkSwitch detects no second digit after 1.5 seconds, it
will follow the programmed option for that Auto Attendant.
2) If you don’t want to use the options 1, 2, and 3 for any of the Auto Attendants,
you can set the option to ‘4 seconds’. Callers will have more than enough time to
dial all 3 digits of any extension without accidentally falling through to one of
the Auto Attendant options.
3) If you don’t want to give callers the ability to dial any of the extensions and
only permit them to access single digit options, set this value to ‘immediately’. As
soon as TalkSwitch detects the first digit, it will follow the specified option for that
Auto Attendant.
74
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Ring Patterns:
This option allows you to check the ring pattern of your Telephone Company
lines. When you activate this feature, you will need to call into any of the lines
connected to TalkSwitch and let it ring at least 3 times before the Auto Attendant
answers the call. After TalkSwitch captures 2 ring patterns, the information will
be displayed in a dialog box. Please take note of this information and pass it
along to Centrepoint Technologies Technical Support if you are having problems
with TalkSwitch answering the lines and playing the Auto Attendant.
3.3.5.5 Troubleshooting —Advanced
DTMF Detection:
If callers are complaining of being misdirected when they select options at the
Auto Attendant, then these values might need to be adjusted.
Minimum time: The default setting of 45ms should be adequate for most
environments. It may, however, be necessary to lower this value if TalkSwitch
appears to have trouble ‘hearing’ digits when dialed at the auto attendant. It
might need to be increased in cases where the system is ‘hearing’ ghost DTMFs
and accidentally misdirecting callers.
3.0
Configuring TalkSwitch
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Maximum time: The default setting of 65ms should be adequate for most
environments. In most problem cases, this value only needs to be bumped up a
bit to help the system deal with echoed digits seen from cell phones. For example:
calls keep being misdirected to extension 111. This usually indicates that even
though the caller may have dialed 113, TalkSwitch sees 1113 because the ‘1’ was
echoed by the cell phone network. Once TalkSwitch captures 3 digits, it will
ignore the rest, hence the digits ‘111’ will be accepted and the ‘3’ ignored.
Line CPC/ Disconnect Clear:
If calls are being disconnected accidentally in mid conversation, this usually
indicates a problem with the telephone line. TalkSwitch is always looking for a
‘hangup’ signal from the phone company called a CPC or Disconnect Clear
signal. If the line has ‘shorts’ or the line card at the central office is defective, then
CPC signals in the 250ms range might come down the line and cause TalkSwitch
to hangup. Try bumping up this value if this seems to be occurring.
Networked
Ringback Control:
If an extension seems to ring back as if a caller was on hold, but when answered,
no one is there, this could indicate a debounce problem with the phone
hookswitch. When someone at the extension hangs up, the handset bounces
slightly to cause a flash signal to be seen by TalkSwitch before the hang up. As a
result TalkSwitch puts the line on hold. To help with this problem, this value can
be increased to the point where it will stop the ringbacks.
Line Impedance:
Typically, most phone companies in North America have a terminating line
impedance of 900 ohms + 2uF. In some cases, it may be 900 ohms. If TalkSwitch
is being connected behind another phone system or gateway, then you may need
to select 600 ohms. If the incorrect value is chosen, the system will still operate,
but it may cause echo during conversations.
Fax Detection:
If fax calls are not being directed properly to the fax machine, then you may need
to set this option to detect 1 tone. If it’s set to detect 1 tone and people complain
they have been accidentally routed to the fax machine, then set this value to
detect 2 tones.
VoIP Ports:
The default SIP signalling port is 5060. If you need to choose another port, then
enter a value between 1024 and 16556.
The starting RTP port for TalkSwitch is 6000. From this starting point, TalkSwitch
needs 4 ports for each TalkSwitch unit. RTP ports are even numbered from the
start port. ie. 6000, 6002, 6004 and 6006 are needed for the first TalkSwitch unit
on a LAN and 6024, 6026, 6028 and 6030 would be used for the fourth unit.
76
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using
TalkSwitch
4
4.1
In the Office - Receiving Calls with or without the
Auto Attendant
4.1.1 Receiving calls using the Auto Attendant
If you don’t have a receptionist, using the Auto Attendant will help you handle all
your inbound calls and help improve your corporate image. Once it has been
configured and its messages have been recorded, that’s it! The Auto Attendant takes
care of the rest. It will follow whatever instructions (configuration) it was given. For
details on configuring the Auto Attendants, see section 3.3.2.2. For details on
configuring TalkSwitch to answer calls using Auto Attendants, see section 3.3.2.3.
When calls are answered by an Auto Attendant, callers can dial any Local Extension
(1xx), Remote Extension (2xx), Extension Ring Group (300 - 309), choose options
0, 1, 2, 3, 4, 5 (if configured to perform specific actions), dial voicemail direct (
and mailbox), send faxes, or remain on the line to follow an action programmed for
that Auto Attendant. TalkSwitch owners and employees can also access other options
at the Auto Attendant, including Call Back (dial 6), Call Bridge (dial 80 - 88, 9),
retrieve voicemail (dial
changes (dial ). All of these features can be password-protected to eliminate
system tampering from outside users.
and mailbox), enter command mode to make system
4.0
Using TalkSwitch
79
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.2 Receiving calls without the Auto Attendant
If you choose not to use the Auto Attendant to answer calls, please note that the Call
In order for calls to go
Cascade options for the Local Extensions will not be engaged.
to an extension’s mailbox, the Auto Attendant must first answer the call or someone
in the office must then transfer the call.
For details on configuring TalkSwitch to ring
specific extensions during inbound calls, see section 3.3.2.3. Once calls have been
answered at a Local Extension, they can be transferred to any extension or voice
mailbox. See section 3.2 for more details.
4.2
In the Office - Making and Receiving Calls
4.2.1 Making calls from a Local Extension
Placing Intercom calls from one Local Extension to another Local Extension,
Remote Extension or Extension Ring Group:
You can place intercom calls from one Local Extension to another Local
Extension, Remote Extension, VoIP Extension or Extension Ring Group by
simply picking up your extension’s handset and dialing the number of the
extension with which you wish to intercom. An Intercom call can be identified by
a unique ring cadence (2 short rings) except in the case of a Remote Extension
Intercom call, where the phone will ring as usual, or if a Ring Group has a ring
cadence other than ‘normal’. Intercom calls do not follow Call Cascade
sequences of the extensions. Call Cascade is only followed after a call has been
transferred.
Placing ‘out-of-office’ calls from a Local Extension:
To place a call to an out-of-office telephone number from a Local Extension, you
must first access an available line by choosing a Hunt Group (9, 81-88) at the
internal dial tone. Restrictions to specific Line Hunt Groups can be configured for
each extension. Your extension can also be configured to Directly Access a specific
line (i.e. when a handset is picked up, you will hear the Telephone Company dial
tone and can dial an outside telephone number as usual).
If you have Direct Line Access enabled for a Local Extension, you will need to dial
‘Flash’ before dialing any system features, such as extensions or voicemail.
4.2.2 Receiving calls at a Local Extension
To receive calls at a Local Extension, simply pick up the extension’s handset when the
extension rings. If the call went through the Auto Attendant to the extension and it
has call screening enabled (configured on the Local extension and Ring Group
pages), you have the choice of accepting the call by pressing or, re-routing the call
to its ‘Answer at ext.’ Call Cascade options by pressing or hanging up.
80
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Pick Up/Call Grab:
To intercept a call that is ringing on any other Local Extension before or after the
Auto Attendant has engaged, pick up your handset and, at the TalkSwitch internal
dial tone, dial 9. This will route the call to your Local Extension.
To “Grab”a call ringing specifically at another extension before or after the Auto
Attendant has answered, dial 7 and the extension number (ie. 7112 to grab
a call ringing at extension 112). If you are in the middle of a call and want to
connect to another incoming caller, press ‘flash’ to place the first caller on hold,
then dial 9 or 7 and the extension number to connect to the second caller.
Once you are finished the second call, or you would like to return to the first
caller, press ‘flash’ ‘7’.
4.2.3 Placing calls on Hold at a Local Extension
To Place calls on hold:
To place callers on hold, press ‘flash’. Follow the same procedure to take callers
off immediate hold. If you have multiple callers on hold or in queue at your
extension, you can press ‘flash’ ‘7’ to retrieve callers on a first in / first out basis.
If you use the ‘Hold’ button on a regular phone, you will not be able to access any of
the TalkSwitch features while the caller is on hold. Also, if you have Music-on-hold
enabled, the caller will not hear music while they are on hold.
4.2.4 Transferring calls
From a Local Extension to another Local Extension, Remote Extension or
Extension Ring Group:
To initiate an Unscreened Transfer – put the caller on hold (by dialing ‘flash’),
dial the appropriate extension number and hang up. The caller will be taken off
hold when the receiving extension is answered. If the transferred call is not
answered after the number of rings specified in the No Answer setting for the
destination extension or if the extension is busy, one of the following will happen:
D
efault:
The transferred call will be handled according to the
destination extension’s No Answer or Busy at extension
settings.
Option:
The call will be transferred back to the transferring
extension.
The option is chosen in the Manual Transfer tab in the Options folder.
4.0
Using TalkSwitch
81
Download from Www.Somanuals.com. All Manuals Search And Download.
To announce calls before transferring (Screened Transfer) – put the caller on hold
and dial the appropriate extension number. If the person at the receiving extension
answers and wishes to take the call, simply hang up or dial ‘flash’ ‘4’ to complete the
transfer and get internal dialtone. The caller will immediately be taken off hold and
connected with the receiving extension. If the person at the receiving extension does
not wish to take the call, you can press ‘Flash’ ‘5’ to return to the caller.
If you dial an extension and it is busy or not answered, you can still complete the
transfer so that the caller will be directed according to that extensions’ Call Cascade
settings.
If you tend to handle many calls, you may want to complete or cancel a transfer without
hanging up. Flash ‘4’ will complete the transfer and then provide internal dialtone
while flash ‘5’ will cancel the transfer and connect you back to the caller.
From a Local Extension to any outside telephone number:
To initiate an Unscreened Transfer – put the caller on hold, select a Line Hunt
Group (dial 80 for Same Line Connect), then dial the outside telephone number
then press ‘flash’ ‘4’ to complete the transfer. You cannot simply hang up to
complete the transfer otherwise the calls will be disconnected.
If the person at the receiving extension does not wish to take the call, you can
press ‘flash’ ‘5’ to return to the caller.
If you have the 3-Way Calling/Conference or Centrex Transfer feature enabled on the
current line, you can select the Same Line Connect (80) to make use of these features.
Everything proceeds as above on the same line the call came in on.
4.2.5 Call Park – Parking and retrieving callers
Call Park is a useful feature for placing a call on hold and then being able to retrieve
it from any other Local Extension. TalkSwitch has 10 Park Orbits in all models.
To place a caller in a Park Orbit, press ‘flash’ then and choose a Park Orbit (500
to 509). You will hear a confirmation after parking the caller that indicates the caller
has been parked successfully. If the Park Orbit is already occupied, you will hear “I’m
sorry, that extension is unavailable at this time.” then dialtone. Once again press
and choose a new Park Orbit. Once the caller is parked, you can retrieve the caller at
another Local Extension by pressing
and the appropriate Park Orbit. If Direct
Line Access is enabled at the extension, then you must press ‘flash’ first.
If you have the External Paging option enabled on TalkSwitch, you may choose to
announce over the P.A. system (by pressing 0) that there is a call parked in a
specific Park Orbit for a co-worker. For example: “Bob, please pick up 501.” – which
82
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
tells Bob that he can retrieve the parked call from any extension by getting dial tone
and pressing 501. The caller will now be connected to Bob at that extension. If
you have Direct Line Access enabled at your extension, you will need to press
‘flash’ first before retrieving the parked call.
4.2.6 Call Queue/UCD - Queuing and retrieving callers
4.2.6.1 Queuing calls to a single extension
Call Queue is a useful feature for placing multiple callers on hold at your extension
while you are on an existing call. Call Queue is enabled in the TalkSwitch software’s
Call Cascade section in the Call Handling folder for Local Extensions and Extension
Ring Groups. Callers will get queued at your extension if you set the first level in the
‘Busy at extension’ Call Cascade to ‘queue caller’.
If an extension is currently busy and has ‘queue caller’ set for the ‘Busy at extension’
Call Cascade, incoming callers will hear one of the following prompts, followed by
music (if enabled) while they are on hold:
If the call came from the Auto Attendant and the extension has a voice
mailbox:
“The extension you have reached is currently busy. If you wish to continue
holding, please remain on the line. To leave a voicemail message, press 1,
and to return to the main menu, press
”
If the call came from the Auto Attendant and the extension has no voice
mailbox:
“The extension you have reached is currently busy. If you wish to continue
holding, please remain on the line and to return to the main menu, press .”
If the call was transferred from another extension and the extension has a
voice mailbox, but there is no Auto Attendant on this line with a main menu
to return to:
“The extension you have reached is currently busy. If you wish to continue
holding, please remain on the line. To leave a voicemail message, press 1.”
If the call was transferred from another extension and the extension has no
voice mailbox and there is no Auto Attendant on this line with a main menu
to return to:
“The extension you have reached is currently busy. If you wish to continue
holding, please remain on the line.”
4.0
Using TalkSwitch
83
Download from Www.Somanuals.com. All Manuals Search And Download.
While the caller is on hold at your extension, you will hear a ‘Call Waiting’ beep every
75 seconds. If you want to rotate through queued callers, dial ‘flash’ then ‘7’. The
caller you are speaking to will be placed on hold, and the first caller in the queue will
be retrieved. If you have multiple callers queued up, pressing ‘flash’ then ‘7’ will
retrieve callers on a first in/first out basis.
4.2.6.2 Queuing callers to an Extension Ring Group
If you want to queue callers for a Ring Group, you can configure this action
using an Auto Attendant. This feature is sometimes referred to as Automatic Call
Distribution.
Example: Configure Auto Attendant 1 so that if callers press ‘5’ they will be
queued to ring group 301 for technical support. Now when a caller presses ‘5’ for
tech support, they will immediately enter the queue. Every 60 seconds the caller
will hear the following prompt: “Your call is important to us; please remain on
the line. To return to the previous menu, press star.” Extensions that are part of
the ring group and are available will start ringing within 10 seconds of hanging
up the phone from a previous call. The delay gives you time to make a new call
or activate ‘Do not Disturb’ as a log out option. After your extension rings 5 times,
it will ring once every 16 seconds. When picked up, you have the option to take
the queued call or make a new call.
4.2.7 Conference calling with TalkSwitch
2 TalkSwitch Local Extensions and 1 outside caller:
You do not require access to the telephone company’s 3-Way Calling/Conference
service to use TalkSwitch’s conference calling capabilities.
1. Establish a call with an outside party.
2. Place the outside caller on hold by pressing ‘flash’. Dial the number of the
Local Extension you wish to conference with.
3. When the extension is picked up, you can establish the 3-way call at
anytime by pressing ‘flash’ then ‘6’.
2 outside callers and 1 Local Extension (eg: Line 1 and Line 2):
You can do this type of conference call using two different methods.
The first method is similar to above, using only TalkSwitch for the conference
function.
1. Establish a call with an outside party.
2. Place the outside caller on hold and dial the number of the other outside
party you wish to conference with. If you have ‘Direct Line Access’ enabled
at your extension, you will first need to dial ‘9’ or another Hunt Group
before dialing the second phone number.
3. When the call is answered, you can establish the 3-way call at anytime by
pressing ‘flash’ ‘6’.
84
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
When using the telephone company’s 3-Way Calling/Conference service you can
conference by following the instructions below:
1. Establish a call with an outside party.
2. Place the outside caller on hold by pressing ‘flash’ 80 and then dial the
number of the other outside party you wish to conference with.
3. When the call is answered, you can establish the 3-way call at anytime by
pressing ‘flash’ 80.
4.2.8 Making and receiving calls using VoIP
TalkSwitch CVA supports inter-branch connectivity via PSTN and VoIP. Once properly
configured, calls can be made between locations using VoIP with broadband
connections. TalkSwitch has 50 VoIP location codes (250-299) that can be assigned
to any VoIP line. These location codes can be dialed from any extension or auto
attendant. TalkSwitch automatically hunts the VoIP ports for placing these calls.
Other calls can be made over VoIP by dialing hunt group 88 (first confirm VoIP lines
are active in this hunt group). Dialing ‘88’ at internal dialtone tells TalkSwitch to
hunt all VoIP lines for an available line. In order to reach a remote location, a VoIP
phone number needs to be assigned to the VoIP line you intend to call.
Example:
You have 3 branch locations (New York, Miami, San Jose), all with TalkSwitch CVA
units.
Location 1: New York
Phone numbers assigned to 4 VoIP lines: 250-261 (16 phone numbers)
Location 2: Miami
Phone numbers assigned to 4 VoIP lines: 270-273 (4 phone numbers)
Location 3: San Jose
Phone numbers assigned to 4 VoIP lines: 280-283 (4 phone numbers)
If someone in the New York office wants to reach someone in the Miami office, they
can dial one of the phone numbers associated to Miami (270-273). TalkSwitch will
automatically find an available VoIP line then connect to the Miami location. The
TalkSwitch at the Miami location will handle the call according to the configuration
in the Call Handling section for the VoIP lines.
4.0
Using TalkSwitch
85
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.9 Using Phones connected in parallel to TalkSwitch
Phones connected in parallel (not connected to TalkSwitch but connected to the
same line) with TalkSwitch will always ring at least once before TalkSwitch starts
ringing its extensions or the Auto Attendant answers the call. This occurs because
TalkSwitch uses the first ring to identify the incoming ring pattern before passing it
on to the extensions or the Auto Attendant (TalkSwitch determines if the call is a
Distinctive Ring and detects any Caller ID information). A parallel phone can ‘barge
in’ on any telephone call on any of TalkSwitch’s Lines.
Making and receiving calls on phones connected in parallel with TalkSwitch:
Making Calls: Make calls on parallel-connected phones just as you would if
TalkSwitch were not sharing the telephone line with them.
Answering Calls: If a call is answered on a parallel-connected phone before the
Auto Attendant engages, simply continue with the call as per usual. TalkSwitch
will take no further action. If a call is answered on a parallel-connected phone
after the Auto Attendant engages, you can turn off the recorded Auto Attendant
message by using the phone’s touchtone keypad to dial ‘
continue the call on the parallel-connected phone.
0’. You may then
Transferring calls on parallel-connected phones:
Calls answered on a parallel connected phone can be transferred to any
TalkSwitch extension or voice mailbox. If you want to transfer the caller, simply
key in the ‘Transfer Prefix ’, after you hear 2 ‘beeps’ enter the extension or
voice mailbox number then hang up. You cannot announce a caller to the
transferred extension, but if you do stay on the line, you will be in a ‘conference
call’ state. You can hang up at any time.
If you transfer a call from a parallel connected phone and then hang up, the
extension will ring the number of times selected for that extension. If the
extension is not answered within the specified number of rings, the call will be
handled according to that extension’s Call Cascade actions.
When a phone in parallel with TalkSwitch is off-hook, you will notice that the
corresponding line light will flicker to indicate the line is occupied. TalkSwitch
will not allow extensions to barge in on a call when that line is in use.
You have the ability to change the Transfer Prefix to
instead of
. You may
need to change the prefix if the default prefix conflicts with another device or service.
To change the Transfer Prefix, open the configuration software and change the setting
in the Manual Transfer tab under ‘Options’.
86
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.10 Modems and telephone line access
If your modem is attached to TalkSwitch as an extension, you can configure it to
access your telephone lines in one of two ways:
1. Direct Line Access: You can give the extension to which your modem is
attached ‘Direct Access’ to one of your telephone lines (i.e. you don’t have to
dial 9, or any other Hunt Group to access an outside line). This can be a use-
ful option if you don’t want to change your dial-up options for the modem.
See section 2.3.1.4 for more details on configuring Direct Line Access.
2. Hunt Groups: If you have decided to use a telephone and modem on the
same extension, Direct Line Access may not be the best solution. TalkSwitch
extensions with Direct Line Access immediately connect to one of your lines
when you pick up the telephone’s handset. Therefore, you are unable to select
a specific telephone line or access voicemail, intercom or access other system
features without first pressing ‘flash’.
To have your modem access a specific line using a Hunt Group:
Change your modem’s ‘Dial Properties’ to include the intended Hunt Group (81-
88 or 9) followed by the letter ‘w’, before the ‘Dial up Networking’ telephone
number (e.g. 9w555-5555). Including the letter ‘w’ after your ‘Dial out Access’
number instructs your modem to a) dial the access number 81-88 or 9, b) wait
until it detects a dialtone, and then c) dial your ‘Dial up Networking’ number.
If your modem is having problems dialing out, you may have to use a comma
(,), which represents a 2 second pause, instead of the ‘w’ for ‘wait for dialtone’.
Because TalkSwitch CVA is a digital system, modem calls will only operate at a
maximum speed of approxiamtely 32 Kbps.
4.3
Out of the Office - Receiving Calls through Call
Forwarding
4.3.1 The three ways to forward calls
1. Automatic call forwarding - The Auto Attendant can automatically forward
office calls to your call forwarding telephone number(s) (Remote
Extensions). This is done by using the Auto Attendant message to prompt
callers to select your Remote Extension number(s). (e.g. “To speak to John
Doe, press 211.”)
4.0
Using TalkSwitch
87
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Manual call forwarding - If someone in your office has answered a call at a
Local Extension, the call can be ‘transferred’ to one of the call forwarding
(Remote Extension) numbers. Simply put the call on hold at the Local
Extension, dial the Remote Extension number (e.g. 211) to which you want
the call forwarded and then hang-up. The call will be handled according to
the Call Cascade options of that Remote Extension.
3. Conditional call forwarding - If the Auto Attendant answers a call and the caller
selects an extension or Ring Group number that is already busy or is not
answered, the Auto Attendant can forward the call to a Remote (out of office)
extension number. Conditional call forwarding is configured in the TalkSwitch
Software using the Call Cascade’s ‘No answer’ or ‘Busy at extension’ settings
configurable for each Local Extension, Remote Extension and Ring Group.
4.3.2 Transferring calls from a Remote Extension
Remote Extension Call Transfer is a new feature introduced in version 2.39 of the
TalkSwitch firmware. Calls forwarded to a Remote Extension (not using Centrex or
3-Way Calling services) can be transferred to any local or remote extension, ring
group or voice mailbox. This feature also applies to VoIP Extensions 250-299.
Transferring calls:
Calls can be placed on hold at a Remote Extension by dialing
during a conversation. You will then hear dialtone as you would hear at a Local
Extension. At that time, you can perform any of the following actions:
anytime
1) Press again to retrieve the call placed on hold.
2) Dial any Local Extension, Remote Extension or Ring Group.
3) Dial and mailbox to transfer a caller to a voice mailbox.
If the system is configured in the TalkSwitch software in the Troubleshooting 2 tab
to perform blind transfers only, then the system will then play the prompt “Call
Transferred. Goodbye.” and hang up after the extension or mailbox is dialed.
If the system is configured in the Troubleshooting 2 tab to allow screening of
calls, then you need to dial
transfer and return to the caller.
4 to complete a transfer or
5 to cancel the
4.3.3 Screening options for forwarded calls
The screening options for Call Forwarding are configured in the TalkSwitch software
using the Call Cascade’s ‘Answer at ext.’ options available in the ‘Remote Extension’
tab. See section 2.3.3.5
Forwarding calls with screening:
When ‘play accept/reject prompt’ is configured in the ‘Answer at ext.’ Call
Cascade option, TalkSwitch plays a pre-recorded prompt to the caller asking them
88
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
to hold, and then dials your call forwarding telephone number. When you answer
the forwarded call, TalkSwitch plays a pre-recorded prompt to you that identifies
the call as having been forwarded (“This is Call Forward”). You then have the
choice of accepting the forwarded call by pressing on your telephone keypad
or, re-routing the call to its call screening Call Cascade options by pressing or
hanging up.
When ‘play caller’s name first’ is configured in the ‘Answer at ext.’ Call Cascade
option, TalkSwitch plays a pre-recorded prompt to the caller asking them to
record their name at the sound of the tone. TalkSwitch then asks the caller to
hold and dials your call forwarding telephone number. When you answer the
forwarded call, TalkSwitch plays a pre-recorded prompt identifying the call as
having been forwarded (“This is Call Forward, you have a call from...”) and then
plays the recording of the callers name. You have the choice of accepting the
forwarded call by pressing on your telephone keypad or re-routing the call to
its call screening Call Cascade options by pressing or hanging up.
When either screening option is used, and you have music on hold enabled and you
are not using the 3-way calling feature (Same Line Connect) to forward calls, the
caller will hear music while TalkSwitch is waiting for the Remote Extension to accept
the call.
If a forwarded call is not answered or the line is busy, TalkSwitch will perform the
following, based upon how the call was originally forwarded:
If the call was automatically forwarded: the call will follow the Remote
Extension’s ‘No answer at ext.’ or ‘Busy at extension’ Call Cascade action.
If the call was manually forwarded: The call will follow the Remote Extension’s
‘No answer at ext.’ or ‘Busy at extension’ Call Cascade action. This action can be
changed to ring the extension back who performed the transfer in the
Options>Manual Transfer tab.
If the call was conditionally forwarded: The call will follow the following Call
Cascade action in the ‘No answer at ext.’ or ‘Busy at extension’ for the original
extension chosen.
4.0
Using TalkSwitch
89
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3.4 Calls over VoIP with SIP phones and Gateways
If you have teleworkers connected to the system via a certified compatible SIP device
(ie gateway or SIP phone), there are several ways that the teleworker can interact
with TalkSwitch.
Making calls:
Once the phone or gateway is registered with the TalkSwitch SIP server, then calls
can be made as follows.
1. At dialtone, dial a phone number associated to any of the other locations.
2. At dialtone, dial a phone number associated to one of the VoIP lines on
TalkSwitch. Ensure an Auto Attendant is programmed to answer this line.
Once the Auto Attendant has answered, you can dial any extension, VoIP loca-
tion or voice mailbox. If you want to place calls through the regular phone
lines, then a Call Bridge account must be activated. Regular phone lines can
be accessed by dialing ‘9’ then entering the password for Call Bridge.
TalkSwitch currently does not support the ability to place calls on hold or transfer calls
when making calls to other locations, since the call does not actually go through
TalkSwitch.
Receiving calls:
Once the phone or gateway is registered with the TalkSwitch SIP server, then calls
can be received directly from other registered gateways or through the system.
1. If the call is routed via TalkSwitch, then you have the ability to transfer the
caller by dialing
2. If the call came directly from another SIP gateway or phone, then you can
transfer the call if your service provider supports this feature.
then any extension or voice mailbox.
4.4
Using the TalkSwitch Voicemail System
Each TalkSwitch unit comes with approximately 30 minutes of voicemail recording
capacity (shared with Auto Attendant greetings). This capacity can be increased with
the addition of TalkSwitch memory cards. You can add another 1/2, 1, 2 or 4.5 hours
of storage to each unit. Contact your TalkSwitch dealer to purchase memory cards.
When a TalkSwitch memory card is inserted in the memory slot, the system will
automatically configure the card within 20 seconds, making it fully functional.
90
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4.1 Activating Voice mailboxes
A Voice mailbox is activated in the TalkSwitch configuration software. There are 3
series of Voice mailboxes that can be activated in the Voicemail section of the
configuration:
Local Extension mailboxes:
These mailboxes are generally associated to the Local Extensions. By default,
all Local Extensions are activated with a respective mailbox.
Remote Extension mailboxes:
The Remote mailboxes are associated with the Remote Extensions. If you
activate a Remote Extension and want a voice mailbox associated with that
extension, you can activate that mailbox in the Voicemail tab.
General mailboxes:
These mailboxes are activated in the Voicemail tab. They are not associated
to any particular extension.
If you want inbound calls to go straight to a voice mailbox after x number of rings, then
you need to program an Auto Attendant to answer first, and then provide a fall through
to voicemail. See section 3.3.3.3 for an example of this configuration.
Callers can reach voicemail or announcements via the Auto Attendant, Call Cascade,
or they can be transferred from a Local Extension. To leave a message from a local
extension, they can pick up a Local Extension and dial and the mailbox number.
To transfer a caller to voicemail, press ‘flash’ then and the mailbox number.
When a caller presses after leaving a message, or after 2 minutes has elapsed,
TalkSwitch will play a prompt asking callers if they wish to keep the message, listen
to the message or record a new message. Callers can also press ‘0’ and the system will
direct the call according to the setting of the Auto Attendant that transfered the call
originally.
4.4.2 Retrieving Messages / Accessing a Voicemail box
When a new message is left at a Local Extension mailbox, TalkSwitch will play stutter
dial tone to that extension when the handset is picked up. It can also light up the
message waiting light on the phone if the phone supports FSK Message Waiting
Indicator.
4.0
Using TalkSwitch
91
Download from Www.Somanuals.com. All Manuals Search And Download.
To access a mailbox to retrieve messages, or to change mailbox options, dial
from a Local Extension or and the mailbox number at the Auto Attendant
if dialing from an outside location (or a local extension). Local extensions can also
transfer internal calls to voicemail by pressing ‘flash’ then dialing and the
mailbox number. If you have Direct Line Access enabled, be sure to press ‘flash’
before trying to access your mailbox.
If you have a line configured to go straight to voicemail, dial ‘8’ during the greeting to
access messages from outside phones.
The first time you access your voicemail, you will be prompted to set up your mailbox
by assigning a password (optional), recording a greeting and recording your name
for the dial-by-name directory. Since there are no directory listings for the general
mailboxes, you will not be prompted to record a name for them. If you wish to have
your name in the company directory, you should always use the mailbox associated
to its extension, since the directory is related to the extension and its mailbox.
Once your mailbox has been setup and you access it, through prompt instructions
you may do the following:
Listen to messages (press 1):
If there are any messages in your mailbox, you can access them by pressing 1.
TalkSwitch will always start with new messages before playing back any older
messages. You can perform the following actions during or after the message:
Dial 1:
Dial 11:
Dial 3:
Dial 33:
Dial 6:
Dial 7:
Dial 9:
Rewind 10 seconds
Rewind to beginning of message
Skip ahead 10 seconds
Skip to end of message
Forward the message (with or without a note)
Delete message
Save message
Dial
Dial
Back up one level
:
:
Skip to next message – This leaves new messages as new.
Change greeting options (press 2):
This section allows you to record a new personal voicemail greeting. The
default greeting is “The extension you have reached is unavailable at this
time. Please leave a message after the tone”.
92
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep in mind while recording your greeting or announcement that callers can press
to return to the previous Auto Attendant (if the call came from the Auto Attendant) while
listening to your greeting and can press
when they are done recording for more
options. You may want to give your callers these options for their convenience.
Change personal options (press 3):
This section allows you to change your current password, turn auto date and
time stamp and phone number on or off and set up or change Pager and
Remote Phone Notification for new messages. By default, auto date and time
stamp is on and this information is played at the end of each message. If you
have Caller ID service, then the phone number is also included with the time
and date.
Record name for Dial by Name Directory (press 4):
If you have not already recorded your name for the directory or wish to
change the recording, you can do so here. The dial-by-name directory is
accessed at the Auto Attendant according to your configuration. Callers are
directed to enter the first 3 letters of the employee’s last name. The system will
find the exact or closest match then play the recorded name and the exten-
sion number, then give them the option to connect to that extension. Note:
You must record your name in order for the extension to be included in the
dial-by-name directory.
4.4.3 Pager and Cell Phone notification
When a new message is left in a voice mailbox, it can notify a pager, cell phone or
any remote number if the mailbox has been configured to do so.
You can configure the system to notify you for every new message or for only the first
new message received since the last time new messages were accessed.
If using Remote Phone Notification, you have the option to accept or reject the
notification call once you answer. To listen to messages, press .To put off listening
to messages, press
.
For details on configuring Pager and Remote Phone Notification, please see section 3.3.2.
4.0
Using TalkSwitch
93
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5
Music-on-Hold
TalkSwitch can play music to callers when they are on hold, parked or queued. The
music played to the callers will be provided by the source you have connected to the
MUSIC jack.
If you ENABLE Music-on-Hold and have an audio device plugged into the
back of TalkSwitch:
1. When callers are put on hold at an extension, they will hear the music instead
of TalkSwitch’s default on-hold beeping tone.
2. When the Auto Attendant answers a call and transfers the caller to an
extension, the caller will hear a pre-recorded message saying “One moment
please”, and then hear the music.
If you ENABLE Music-on-Hold and do not have an audio device plugged into
the back of TalkSwitch:
1. When callers are put on hold at an extension, TalkSwitch will not play its
default on hold beeping tone. The caller will hear silence.
2. When the Auto Attendant answers a call and transfers the caller to an
extension, the caller will hear a pre-recorded message saying “One moment
please” and then hear silence.
If you DO NOT ENABLE Music-on-Hold and have an audio device plugged into
the back of TalkSwitch:
1. When callers are put on hold at an extension, callers will hear TalkSwitch’s
default on hold beeping tone and your music.
2. When the Auto Attendant answers a call and transfers the caller to an
extension, the caller will not hear any pre-recorded message. They will
hear your extension ringing and your music.
If you DO NOT ENABLE Music-on-Hold and do not have an audio device
plugged into the back of TalkSwitch:
1. When callers are put on hold at an extension, they will hear TalkSwitch’s
default on-hold beeping tone.
2. When the Auto Attendant answers a call and transfers the caller to an exten-
sion, callers will hear your extension ringing.
94
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Music-on-Hold and Call Forwarding to Remote Extensions:
If you are using the telephone company’s 3-Way Calling/Conference service
(Same Line Connect) to activate TalkSwitch’s Call Forwarding, callers will not
hear your ‘music’ when being forwarded to a Remote Extension. When calls are
forwarded, the caller is put on hold by the telephone company central office
switch rather than at TalkSwitch. Therefore, the caller hears silence while being
transferred.
A system prompt will indicate that callers will hear silence while the system tries
to locate their party. This prompt helps explain to callers why all of a sudden they
may hear silence for an extended period of time before possibly connecting to the
Remote Extension. This prompt cannot be disabled.
If you have 2 or more units on a LAN, you will need to supply a music source to each
TalkSwitch unit. 1/8" audio splitters are available at most electronics stores.
Networked
4.6
Mode Switching Options
Manual Mode Switching:
You can use telephone keypad commands at either a Local Extension or at the
Auto Attendant to have TalkSwitch switch Modes.
At Local Extension dialtone or at the Auto Attendant, dial to enter command
mode, then enter a password if necessary. Next, dial any of the following Quick
Commands followed by the sign:
Activate Mode 1:
Activate Mode 2:
3 1
3 2
Check Current Mode: 3 0
Automatic Mode Switching using the Time Scheduler:
Use the configuration software to activate TalkSwitch’s Time Scheduler feature.
You can configure TalkSwitch to automatically switch between Modes by
configuring the times for Mode changes in the ‘Modes’ tab located under Call
Handling in the configuration software.
If at any time you switch modes manually, TalkSwitch will automatically switch
to the proper mode during the next scheduled mode change.
4.0
Using TalkSwitch
95
Download from Www.Somanuals.com. All Manuals Search And Download.
4.7
Out of the Office - Making Calls with Call Back and Call
Bridge
Working together, Call Back and Call Bridge act as your personal long distance
operator. Whether you are across town or around the world, these two features allow
you to place calls from your office telephone line(s).
4.7.1 Using Call Bridge
Call Bridge allows you to place calls using your office telephone lines when you are
not in the office. You can make a call to TalkSwitch, access a telephone line
connected to TalkSwitch and enter the number you want to dial. This is especially
useful when you are out of the office with your cell phone and need to dial a long-
distance number. To avoid long-distance cell rates, all you need to do is make the
local call to TalkSwitch to access Call Bridge, then make the long-distance call –
accessing your office savings plan.
How to use Call Bridge:
Dial into one of TalkSwitch’s Lines. When the Auto Attendant answers, select a
Hunt Group (81-88 or 9) or Same Line Connect (80). You will then be asked to
supply your Account password to receive dial tone. If you are using Same Line
Connect (80), and the line you are on supports the 3-Way Calling/Conference
service, you will be prompted to enter the phone number.
When you have completed your call (or if the telephone number dialed was
busy), you can do one of the following:
A) Make another call: Press
. TalkSwitch will disconnect you from the call
in progress and you can dial another number or redial the same
number.
B) Activate the Auto Attendant: Press
. TalkSwitch will end the Call Bridge
session and activate the Auto Attendant. Once the Auto Attendant message
begins playing, you have the following options:
• Dial (and enter a password if applicable) to enter
Command Mode.
• Dial ‘6’ to change/enter Call Back settings.
• Dial one of your extension numbers (Local, Remote or Ring
Group). This option allows you to contact someone in your
office, check your voicemail, etc.
C) End the Call Bridge Session: Simply hang up. This will end your Call
96
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Bridge session and disconnect you from TalkSwitch. If you want to
guarantee that TalkSwitch disconnects at the end of a Call Bridge session,
dial , then hang up.
If you changed the ‘Special Prefix’ to
make another call, and dial
mode, you will still need to enter
instead of
, you will need to dial
to
to return to the Auto Attendant. To enter command
.
The Call Bridge telephone number dialed can be any telephone number: local,
long distance, toll free (800 and 888) or international. Simply enter the telephone
number as you would if you were sitting in your office. For long distance calls, do not
forget to include the ‘1’, country code, and area code if applicable.
4.7.2 Using Call Back
The Call Back feature allows you to initiate TalkSwitch to call you at a specified
telephone number. This gives you access to any of the following:
• Call Bridge
• Local Extensions, Remote Extensions and Extension Ring Groups
• Voicemail
• Configuration settings
Using Call Back involves 3 easy steps:
1. You call your TalkSwitch telephone number to activate Call Back.
2. You answer and accept the Call Back. (TalkSwitch calls you back within 30
seconds.)
3. At the Auto Attendant you can: choose to perform Call Bridge, dial any
extension, access and retrieve voicemail or configure TalkSwitch.
Activating Call Back:
There are two ways to activate Call Back; Prompted and Auto activation:
1. Using ‘Prompted Call Back’ Activation: From your out-of-office location,
dial a TalkSwitch telephone number. Let the line ring until the Auto Attendant
answers your call and then dial 6 on the telephone keypad. If you have
enabled password protection you will be asked to supply your password.
TalkSwitch will then offer a series of prompts. Now you can either enter 1 and
hang up to initiate the Call Back or, if you need to enter a new Prompted Call
Back number, enter 2 to access the Prompted Call Back settings, then follow
the prompts.
4.0
Using TalkSwitch
97
Download from Www.Somanuals.com. All Manuals Search And Download.
For Prompted Call Back, TalkSwitch always dials the last Prompted Call Back number
entered. If you do not have the Auto Attendant set to answer a line, a generic
TalkSwitch Auto Attendant will answer after 15 rings and you can then dial 6 to access
the Call Back settings.
2. Using ‘Auto Call Back’ Activation: From your out-of-office location, dial one
of the Call Back telephone numbers that has been pre-configured for Auto
Call Back activation. Let the line ring at least once, but no more than three
times and then hang up before the call is answered. Within 20
seconds, TalkSwitch will call your Auto Call Back number.
It is important to remember that all Call Back settings must be pre-configured before
using Auto Call Back. Please be sure that the Auto Attendant for the line using Call
Back does not answer before 4 rings.
Accepting the Call Back:
There are two ways to accept a Call Back from TalkSwitch.
1. Call Back is normally accepted by answering the call and pressing , then,
if required, entering your password. This option is used when you have a
direct line to your Call Back telephone number.
2. The ‘Use Announced message’ option allows the Call Back from TalkSwitch
to reach you even when you are in a hotel or an office where calls are inter-
cepted by a receptionist or switchboard operator. When the Call Back is
answered, TalkSwitch will begin playing your pre-recorded
message (e.g. “Please forward this call to Jane Doe in room 312”). The
message will be played repeatedly for 2 minutes. When the call is
forwarded to you, press , then enter your password on the telephone
keypad to accept the Call Back. (If the Call Back is not accepted within the
initial 2-minute period, TalkSwitch will disconnect the Call Back.) After you
accept the call, you will hear the Auto Attendant, and you can now make your
selection to check your voicemail, ring an extension, use Call Bridge, or enter
command mode.
98
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8
Upgrading the TalkSwitch Software and Firmware
We are continually looking for ways to enhance your communications capabilities.
When new features are added, we want TalkSwitch users to have immediate access to
the update.
TalkSwitch supports firmware updates for adding new features. Because of this
ability, you can easily update your TalkSwitch by visiting our website at:
www.talkswitch.com/support
Step # 1 - Check current version
To identify the appropriate update file, you must first determine your TalkSwitch
firmware and software versions. You can find your TalkSwitch version numbers by
selecting ‘About’ from the Help menu in the configuration software.
Write down the software and firmware version numbers and then go to the
Centrepoint Technologies website at www.talkswitch.com/support. You will find
instructions there to help you to select and download the appropriate upgrade. Follow
the instructions on the site, as they will take precedence over any instructions in this
manual.
Step # 2 - Download new software and firmware
When you select and click on the appropriate version for download, a screen will
appear asking you what you would like to name the file you are about to download,
and in which folder/directory you would like to save it. We suggest leaving the file
name as is (eg. install.exe) and saving it on your Desktop. Once the download is
complete, you can begin your upgrade by double clicking on the install file or using
4.0
Using TalkSwitch
99
Download from Www.Somanuals.com. All Manuals Search And Download.
the ‘Run’ option on your Windows ‘Start’ menu. A series of windows will guide you
through the installation process.
This process updates your configuration software to a newer version. You still need to
update the firmware to take advantage of new features. The new firmware file will
have been placed in the TalkSwitch directory after running the install program.
Step # 3 - Updating the firmware
The final step in the upgrade process is to update the firmware. Follow the
instructions listed on the website carefully for performing the update.
The actual update process will take approximately 1 to 5 minutes, depending on how
many files are needed for the update and how many units are being updated. During
the update, the LED lights on TalkSwitch’s front panel will show diagnostic indicators
for the update.
If you have 2 or more units networked, be sure to update each unit. Units will not
operate properly if they are networked together with mismatched firmware versions. To
confirm all units are properly loaded, you can select ‘View Details’ on the ‘About
TalkSwitch’ page in the configuration software. See Below.
In the event the firmware update was unsuccessful, please follow the instructions
through the update process again. If you continue to have problems, please contact
your reseller or Centrepoint Technologies.
Firmware updates will not alter your system configuration. In the event of a major
system update, it may be necessary for the configuration file to be reset to default
values. In this case you will need to reconfigure the entire system. In the case of a major
system update, Centrepoint Technologies will mention any issues involved with the
firmware update.
If you replaced your computer with a new one, please use the software that matches
the latest version of firmware running on TalkSwitch. If obtained from our website,
you can once again download the install file. All install files found on the website
have both the entire software program and the latest firmware.
100
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4.0
Using TalkSwitch 101
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
Appendix A - Help & Troubleshooting
Appendix B - Using TalkSwitch with Telephone
Company Calling Services
Appendix C - Quick Commands and DTMF
Functions
Appendix D - Safety Precautions and Regulatory
Information
Appendix E - TalkSwitch One Year Warranty
Appendix F - Return Policy
Appendix G - Specifications
Appendix H - TalkSwitch and Power Interruptions
3.0
i
103
Appendices
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - Help & Troubleshooting
If you are having problems with the configuration or operation of TalkSwitch, please
check this section. If you don’t find the solution to your problem here, try checking
the FAQ section located in the Support area at our website: www.talkswitch.com/support.
If you cannot resolve your problem and require further assistance, you can do one of
the following:
1. Contact your TalkSwitch dealer.
2. Contact our Customer Support department by e-mail:
3. Call a Technical Support Specialist at Centrepoint Technologies:
(613) 725-2980 weekdays between 9:00 a.m. and 5:00 p.m. EST.
Please have the following information available when you call:
a) Your e-mail address and telephone number.
b) The serial number located on the bottom of TalkSwitch.
c) Your date of purchase.
d) The number of telephone lines that you have connected to TalkSwitch.
e) The telephone company services that you are using with TalkSwitch.
f) Your PC’s operating system (e.g. Windows 95, 98, ME, 2000 etc.)
Troubleshooting
This section of the manual is designed to help you quickly resolve problems with
TalkSwitch. The problems are organized in the following manner.
1. Problems that can occur when installing the configuration software.
2. Problems that can occur during Configuration.
3. Problems that can occur while using TalkSwitch.
4. Problems that can occur with 2 or more units networked
Before examining the problems, review these common installation checks.
Appendices 105
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Check that your telephone cables are connected to a wall jack at one end and
TalkSwitch at the other. Ensure the devices you are using as TalkSwitch exten-
sions (phones, faxes, etc.) are plugged into the extension jacks located on the
back panel of TalkSwitch. (Do not plug your extensions directly into a wall
jack unless that jack is wired to a TalkSwitch extension jack.)
2. Check the Serial, USB or LAN connection between TalkSwitch and your PC.
3. Ensure that TalkSwitch’s power adapter is plugged into a working power out-
let and that TalkSwitch is turned on. Please make sure that you are using the
power adapter that was provided with TalkSwitch. This is a unique adapter
and it cannot be substituted with any other adapter. If your adapter appears
to be defective, please contact your TalkSwitch dealer to order the proper
replacement adapter.
4. If networked, ensure that you have the latest firmware loaded on all units. In
the TalkSwitch software, select ‘Configure’, then on the ‘About TalkSwitch’
page, click on the ‘View Details’ button in the upper right corner of the screen.
All units listed should have the same firmware version.
Networked
Diagnostic codes for the lights flashing on the front panel of TalkSwitch
All line lights flashing simultaneously: The Unit ID of this TalkSwitch is in con-
flict with another TalkSwitch unit on the same LAN. Make sure you assign a dif-
ferent Unit ID to each TalkSwitch unit. See section 2.5.3 for more information on
changing a unit ID.
Line 2 and 3 lights flashing simultaneously: There is a file system error. To fix
the problem, reboot TalkSwitch. It will do a file system check and fix any prob-
lems encountered. If this does not resolve the problem, contact your TalkSwitch
dealer.
Line 1 and 4 lights flashing simultaneously: There is a voice mailbox error. To
fix the problem, reboot TalkSwitch. It will do a file system check and fix any prob-
lems encountered.
Line 3 and 4 lights flashing simultaneously: Firmware not loaded or corrupted.
To fix the problem, reload the TalkSwitch firmware. Make sure you update with
the last version you updated with. Do not use an old version off the install CD if
you have updated your system.
Line 1 and 4 then Line 2 and 3 lights flashing alternately: System prompts not
loaded or corrupted. To fix the problem, reload the TalkSwitch firmware. Make
sure you update with the last version you updated with. Do not use an old ver-
sion off the install CD if you have updated your system.
106
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
Problems that may occur during Configuration
Problem: I am not able to “Retrieve settings” from my TalkSwitch.
Solution: Try the following solutions, in order, until the problem is resolved.
• Ensure TalkSwitch is turned on and plugged into a working power outlet. Then
select “Retrieve settings”, under the File menu in the configuration software.
• Make sure the serial or USB cable connecting TalkSwitch and your PC is
securely attached to the ports. Select “Retrieve settings”, under the File menu
in the configuration software.
**USB is not currently not supported - future release.
Confirm that TalkSwitch is set to use the proper port. For USB, dial 9 1 at
a Local Extension then listen for the prompt “Accepted”. Next, reboot TalkSwitch
(turn the power off and then back on). For Serial, dial 9 0 at a Local
Extension and listen for the prompt “Accepted”. Next, reboot TalkSwitch.
• From the Control Center section of the TalkSwitch software, choose ‘PC
Connection’ and then select COM Port. Ensure that the configuration sofware
is using the correct port to communicate with TalkSwitch. Then
select“Retrieve settings”, under the File menu in the configuration software.
• Try rebooting TalkSwitch (turn the power off and then back on). Then select
“Retrieve settings”, under the File menu in the configuration software. This
will often correct any miscommunication that may have occurred between
TalkSwitch and your PC.
• Make sure you do not have any communications programs running at the
same time you want to use the TalkSwitch configuration software. These can
include Palm Pilot, Hot Sync, TalkWorks, digital camera software or others.
These programs tend to hold on to COM ports, making them unavailable for
other programs.
Problem: I am unable to configure TalkSwitch using a touchtone phone and the
Keypad Commands.
Solution: Try the following solutions, in order, until the problem is resolved.
• TalkSwitch cannot be configured using a phone that is sharing a line with it.
• If you are trying to configure TalkSwitch using an Out-of-Office phone, you
must first enter Command Mode. Dial at the auto attendant If you have
enabled password protection, you must also first enter the correct password.
• If you are trying to configure TalkSwitch using a Local Extension, make sure
the extension has not been given ‘Direct Access’ to your telephone lines. If so,
you will have to dial ‘Flash’ to receive internal dialtone.
• If the TalkSwitch configuration software is open, you cannot configure
TalkSwitch using touch-tone keypad commands. If the software is closed and
you continue to get the prompt “I’m sorry, TalkSwitch is currently being con-
Appendices 107
Download from Www.Somanuals.com. All Manuals Search And Download.
figured.” Try rebooting TalkSwitch (turn the power off and then back on).
Problems that may occur while using TalkSwitch’s features
The Auto Attendant:
Problem: The Auto Attendant does not play when calls come in.
• Make sure you have recorded the Auto Attendant message.
• Check your Call Handling settings for the ‘Auto Attendant answers’ number
of rings. It may be that the number of rings is set too high.
• Check the mode TalkSwitch is currently running. It is possible that you are in
Mode 2 and have not configured TalkSwitch properly for this mode. Check
what you have programmed for Mode 2 in the Telephone Lines section of the
TalkSwitch software under ‘Call Handling’.
• The line is not connected properly to TalkSwitch. Check to see that the line
light associated to the line is flickering. If not, try replacing the phone cord.
Problem: The Auto Attendant message is broken up or very faint.
• Adjust the Auto Attendant Playback volume setting located in the Audio
Controls tab in the Options folder of the configuration software.
• The quality of the microphone in the telephone handset that you are using to
record your Auto Attendant also affects the quality of your recording. Try
recording the Auto Attendant using another extension/telephone.
Problem: The Auto Attendant answers calls before any of the extensions ring.
This is a problem for those TalkSwitch users who wish to have their Local
Extensions ring before the Auto Attendant picks up incoming calls.
• Check the ‘Extensions to ring’ column in the Telephone Lines tab in the ‘Call
Handling’ folder. The number of rings may be set too low.
Problem: The Auto Attendant is transferring calls to the wrong extension.
• Verify the extension jacks your devices (phones, faxes) are attached to.
Problem: The Auto Attendant answers calls, but does not transfer them to the
extensions.
• Make sure your extensions are plugged into the extension jacks on the back
panel of TalkSwitch (instead of your telephone wall jacks).
• Check your settings in the Auto Attendant page. Are the options pointing to the
correct extensions?
108
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
Music-on-Hold:
Problem: Callers hear music and ‘ringing’ when the Auto Attendant transfers
their call to an extension.
• You have an audio device plugged into TalkSwitch, but have not enabled the
Music-on-Hold feature found on the On-Hold/Ringback tab in the System
Information folder of the TalkSwitch software.
Problem: Callers hear music and a beeping sound when put on hold at an
extension.
• You have an audio device plugged into TalkSwitch, but have not enabled the
Music-on-Hold feature found on the On-Hold/Ringback tab in the System
Information folder of the TalkSwitch software.
Problem: Callers hear the ‘One moment please’ message and then total silence
when the Auto Attendant transfers their call to an extension.
• You have enabled the Music-on-Hold feature, but have not attached an audio
device to the MUSIC jack on TalkSwitch.
• There is a problem with the music source. Check all connections and power.
Problem: Callers hear only silence when put on hold at an extension.
• You have enabled the Music-on-Hold feature, but have not attached an audio
device to the MUSIC jack on TalkSwitch.
• Make sure you use the ‘Flash’ or ‘Link’ button to put callers on hold. If you
use the ‘Hold’ button on a regular phone, callers will be placed on hold at the
phone itself, and not through TalkSwitch.
Problem: Sometimes callers do not hear Music-on-Hold .
• Make sure you have a music source connected to the MUSIC jack at the back
of each TalkSwitch unit connected to the LAN.
Networked
Call Routing with Local Extensions and Home Phones (Transfer and
Intercom):
Problem: Callers are disconnected when transferring calls from one extension to
another.
• It is possible that if you are using the hookswitch to put callers on hold rather
than a Flash button, you may be holding the hookswitch down too long, and,
as a result, are actually hanging up on the caller.
Appendices 109
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem: I can’t use my Conference / 3-Way Calling feature from the phone
company.
• You need to make sure you have checked the box indicating that you have 3-
Way Calling or Transfer and clear on the appropriate lines. This option is
located on the Telephone Lines page in the ‘System Information’ folder of the
configuration software.
Problem: Unable to place intercom calls from a Local Extension.
• If the Local Extension has been configured for Direct Access to your telephone
lines, you need to press ‘Flash’ before intercom calling.
Answering and Fax Machines:
Problem: The answering machine and/or fax machine picks up calls before they
can be answered by telephone extensions.
• Check your settings in the Telephone Lines tab in the ‘Call Handling’ section
in the configuration software. The problem may be that your fax machine
and/or answering machine extension is set to answer calls at the same time as
your telephone extensions. To fix this problem, remove the fax or answering
machine extension from the list of extensions to ring on an incoming call.
Problem: Incoming faxes are not automatically detected and routed to the fax
machine.
• On the Auto Attendant tab of the configuration software, check to ensure that
you have chosen the appropriate extension for the field labeled ‘if a fax call
is detected’.
• Not all fax machines emit a CNG tone that TalkSwitch can detect and route.
Therefore, it is wise to consider incorporating an additional method of fax
routing. This may include the use of a distinctive ring number or giving the
caller the option to select the fax extension. See section 3.3.1.8.
• Many fax machines/modems will ‘time out’ or disconnect after 25 seconds,
on average, if they have not connected with another fax machine/modem. If
you are using the ‘User does not make a selection’ option to route incoming
faxes, the fax call may ‘time out’ before it reaches your fax extension. If your
Auto Attendant is lengthy, you may want to shorten it or use another fax rout-
ing option.
• The level of the Auto Attendant is too loud and as a result is overpowering the
CNG tone, affecting detection. You may want to lower the volume level of the
Auto Attendant.
110
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
Other Possible Local Extension Problems:
Problem: I am unable to access TalkSwitch Lines with a Local Extension.
• Check your ‘Direct Line Access’ settings on the Local Extension page under
‘System Information’ of the configuration software. If a Local Extension has
not been given ‘Direct Access’ to your telephone lines, you must dial 81-88 or
9 to access a line.
Problem: My PC (Internal or External) Modem cannot dial out.
• If the extension to which your Modem is attached has not been given ‘Direct
Access’ to telephone lines, you will have to include a Line Hunt Group prefix
(81-88 or 9) before the number you are dialing. For more information about
Dial Out Access and changing your Modem’s dial properties, see
section 3.2.9, “External modem telephone line access”.
• You may have to change your Modem’s properties so that it waits for a dial-
tone before it begins dialing your Dial Up Networking number. For more
information about changing your Modem’s properties, see section 3.2.9,
“External modem telephone line access”.
Problem: One of the Local Extensions (telephones) does not ring.
• Some telephones require more voltage in order to ring. These phones are usu-
ally the older ‘Bell’ phones that have mechanical ringers. These phones are
too much of a load for TalkSwitch and should not be used as an extension.
• Make sure the telephone cord you are using between the phone and
TalkSwitch is working properly.
• Check to make sure the ringer is turned on for your phone.
Problem: Extension(s) ring, but there is no caller.
• This can occur when a caller hangs up after the Auto Attendant has begun to
play. In some areas, the Telephone Company’s ‘disconnect/clear’ signal is
weak. This is the reason the Auto Attendant may not pick up the disconnect
signal right away when a caller hangs up. Because the Auto Attendant will
receive no response after playing its message, the call will fall through to your
settings for the ‘User does not make a selection’ option associated with that
Auto Attendant.
Appendices 111
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem: When I try to access voicemail, I hear a busy tone.
• Check your ‘Direct Line Access’ settings on the Local Extensions screen under
‘System Information’ of the configuration software. If a Local Extension has
been given ‘Direct Access’ to your telephone lines, you must first dial ‘Flash’
before dialing the mailbox. The same applies for dialing other extensions to
initiate intercom calls.
Problems that may occur with 2 or more TalkSwitch units connected to the
same LAN.
Networked
Problem: I can’t reach an extension across the LAN
• Make sure the other unit is connected to the LAN and powered on.
• Pick up a Local Extension belonging to the other unit. If there is dialtone,
then check your LAN connections. On the rear panel, the top LED of the 3
LEDs next to the LAN port should be on. If there is no dialtone, then make
sure the unit is powered on.
Problem: The configuration does not show the other TalkSwitch unit(s)
• Check your LAN connections. Are you able to communicate with another
extension on the other unit?
• Check the Unit ID of each unit. If the lights on one or more units are flashing,
then there is a conflict with the Unit ID numbers assigned to each TalkSwitch
unit. Connect a phone to each TalkSwitch unit and lift the handset. It will tell
you immediately if a Unit ID number needs to assigned. Follow the instruc-
tions accordingly. You can dial 00 at any time to check the Unit ID of the
unit you are connected to. See section 2.5.3 for more information
Problem: After recording an Auto Attendant greeting, I can’t play it back.
• After recording an Auto Attendant on one of the TalkSwitch units, it will then
copy it to other TalkSwitch units on the LAN. During this process, you cannot
listen to that particular Auto Attendant. Try again in a few minutes.
Problem: Calls are not always reaching my voicemail.
• In extreme cases, when the system is in high use, all channels across the LAN
might be in use so calls cannot be transferred to extensions or voicemail. If
this situation appears to be happening frequently, you may want to consider
optimizing the way the system uses lines. In the Line Hunt Groups section of
the software, we recommend that you enable the ‘Hunt lines on same unit
first’ option. Also, ensure that frequently used extensions are connected to
units with ample lines out, to reduce LAN traffic.
112
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
Example: You have 2 TalkSwitch units, 6 lines and 12 employees. The 6 lines
have the Hunt/Rollover service from the phone company.
Suggested setup:
Plug the 4 highest traffic lines into unit 1. Also connect the 8 highest phone
usage employee extensions to unit 1. Next, connect the remaining lines and
extensions to unit 2. Make sure you leave the ‘Hunt lines on same unit first’
option enabled in the Line Hunt Group section of the software. This arrange-
ment keeps most of the traffic on unit 1 and any outbound calls made from
any extension will usually go out on the same unit the extension is connect-
ed to. The same will apply for inbound calls forwarded to Remote Extensions.
The call will be forwarded out on a line belonging to the same unit that the
call came in on. Only if a line on that unit is unavailable will the call be for-
warded out on a line on the other TalkSwitch unit.
Problem: Calls across the LAN are lower in volume
• Check the line gain levels on the Audio Controls page located in the ‘Options’
folder in the TalkSwitch configuration software. You may need to boost the
Line gain levels on one or more lines to compensate for high loss lines. Take
note that if these controls are set improperly and your lines are problematic,
you may hear an echo when calls are made across the LAN.
Problems that may occur with VoIP
Problem: I hear re-order tone when I try to dial a VoIP location.
• Confirm the number dialed is actually part of the VoIP group (ie. registered
with the same Proxy/Registrar server as your TalkSwitch CVA, SIP gateway or
SIP phone is registered with.
• Check that TalkSwitch has all proper settings in the IP Configuration and
VoIP Configuration pages
• Contact Centrepoint Technologies for help at 888.332.9322
Problem: Callers complain the sound is distorted or choppy.
• Your broadband connection may not have enough upstream bandwidth to
support too many simultaneous VoIP calls. In the ‘Options’ section under
‘Audio Controls’, you may need to disable the G.711 and G.726 codecs and
only use G.729.
• You may have too much data traffic on your Internet connection at the same
time you are trying to make voice calls. We suggest that you use a router that
supports QoS (Quality of Service) for VoIP.
For more VoIP information, visit our support section at www.talkswitch.com/support.
Appendices 113
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B - Using TalkSwitch with Telephone
Company Calling Services
Many of the calling services offered by your local telephone company are compatible
with and enhanced by TalkSwitch’s capabilities.
Caller ID (Call Display) - Displays the telephone number and name associated with
an incoming call.
TalkSwitch is capable of regenerating the Caller ID and passing the information
to its Local Extensions when incoming calls are transferred by the Auto Attendant.
TalkSwitch regenerates the Caller ID and passes it only to the selected Local
Extension. If a Local Extension is configured to ring at least twice before the Auto
Attendant answers, TalkSwitch will pass the Caller ID information to that
extension. If a call is transferred from one extension to another, the Caller ID
information will also be passed. TalkSwitch can also use the Caller ID’s time
stamp to set its internal clock.
Distinctive Ring - The ability to have more than one telephone number that callers
can dial to reach the same telephone line. (Distinctive Ring is also referred to as:
Ident-A-Ring; Ident-A-Call; Ring Master; Teen Service; Double Number; Personal
Ringing; Ring Plus; Smart Ring Service; Special Ring; or Customized Ringing.)
TalkSwitch can detect Distinctive Ring telephone numbers and use them to route
incoming calls automatically. TalkSwitch gives you the ability to use two
Distinctive Ring telephone numbers on all lines. Distinctive Ring numbers on
TalkSwitch’s Lines also have access to the Auto Attendant and all of TalkSwitch’s
other call routing features.
TalkSwitch’s Distinctive Ring call routing features can be used a number of ways.
Routing fax/modem calls, routing voice messaging, separating home/office
calls, and making use of TalkSwitch’s Auto Call Back feature. Each Distinctive
Ring number has a distinctive ring cadence or ring sequence that allows you to
identify the number that was dialed.
Voicemail (Call Answer) - A service which gives callers the opportunity to leave a
message when your phone line is busy or unanswered.
TalkSwitch can work in conjunction with your telephone company’s Voicemail
Service.
Call Waiting - If you are already on the phone, the Call Waiting service will emit a
soft beeping sound to let you know you have another call waiting to be answered.
To talk to the other caller when you hear a Call Waiting beep, press the Flash
button twice. To return to the other caller, you will need to press the Flash button
twice again. This service is not recommended, since TalkSwitch cannot answer
the second call while the first call is already being routed by the Auto
Attendant.
Appendices 115
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Way Calling/Conference - The 3-Way Calling/Conference service allows you to
add a third party to a call already in progress.
The 3-Way Calling/Conference service enhances TalkSwitch’s capabilities
whether you have 1 or more telephone lines. Using 3-Way Calling/Conference
service gives you access to TalkSwitch’s Call Forwarding, Call Back and Call
Bridge features.
Centrex/Plexar Transfer - The Centrex Transfer service is similar in function to the 3-
Way Calling/Conference service. The primary difference is that two external
parties can still remain in conversation even after you hang up. TalkSwitch can
disconnect after the transfer if you have this service and have enabled the ‘Transfer
and clear’ option on the Miscellaneous page located under ‘Options’ in the
TalkSwitch software.
Using one telephone line with Centrex Transfer service gives you access to
TalkSwitch’s Call Forwarding, Call Back and Call Bridge features.
Hunt or Rollover - When using two or more lines, calls coming in on a busy line can
be “rolled over” to an available line in a “hunt” pattern that you can set. There are
two types of hunting – Sequential and Circular. Sequential hunting starts at the
number dialed and ends in the last number in the assigned group. Circular hunting
hunts all the lines in the hunting group, regardless of the starting point. (It will only
circle once through the Hunt Group).
TalkSwitch has the same functionality available on all lines and can work in
conjunction with the Hunt and Rollover services.
Call Hold and Flash
TalkSwitch uses Flash to put calls on hold. A Flash signal is produced by pressing the
Flash or Link button on your telephone (Link is another name for Flash). If you do
not have these buttons on your telephone, you can produce a Flash signal by quickly
depressing and releasing the telephone’s hangup hook or hook switch.
Single Flash - is pressing the Flash or Link button once. You can also depress and
release the telephone’s hangup hook or hook switch once.
Double Flash - is pressing the Flash or Link button twice. You can also depress and
release the telephone’s hangup hook or hook switch twice. When using your
telephone’s hangup hook to initiate a ‘Double Flash’, do not try to initiate the second
Flash too quickly or you may disconnect your caller. Press and release the hangup
hook once, count to 2, then initiate the second Flash.
116
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
When would you use double flash?
1. If TalkSwitch is connected to any other system/service that uses Flash to acti-
vate its features (e.g. a Key Telephone System, PBX, or telephone line with the
Centrex service from your phone company).
2. If you are using any of your local telephone company services that are
activated with Flash (e.g. Call Waiting, 3-Way Calling/Conference, etc.).
What does Single and Double Flash do?
TalkSwitch and the above-mentioned systems/services use Flash to activate their
calling features. TalkSwitch therefore needs a way to tell which (or whose)
features you want to access when you press the Flash button.
Using a ‘Single Flash’: places the caller on hold. (The Flash is not passed to
the CO line, solving problems associated with Flash causing a hang-up at
some COs).
Using a ‘Double Flash’: the first Flash places the caller on hold, and the second
Flash (if pressed within 2 seconds) tells TalkSwitch to pass a Flash to the CO line
to activate the intended CO or PBX feature.
Appendices 117
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C - Quick Commands and Touch-Tone Functions
These Touch-Tone Quick Commands can be dialed from a Local Extension or an
outside telephone at the Auto Attendant. To enter Command mode, dial
Extension or at the Auto Attendant. If you are requested to enter a password, enter
the Administrator password. Next, enter any command followed by the sign.
at a Local
Command
Action
00
TalkSwitch tells you the Unit ID of the unit you are
connected to.
Networked
Networked
0x
Assign Unit ID 1 - 4 to TalkSwitch (x = 1 to 4)
TalkSwitch tells you which mode it is currently using
Switch Modes (x = 1or 2)
30
3x
4x
Record Auto Attendant (x = 1 to 9)
04x
5x
Erase Auto Attendant messages (x = 1 to 9)
Playback Auto Attendant messages (x = 1 to 9)
Record Auto Call Back Announced Messages 1 - 4
Record Prompted Call Back Announced Message
Erase Call Back Announced Messages 1 -4
Erase Prompted Call Back Announced Message
Playback Auto Call Back Announced Messages 1 - 4
Playback Prompted Call Back Announced Message
Set to Serial connection mode (default)
61 - 64
65
061 - 064
065
71 - 74
75
90
91
Set to USB connection mode
2xx 8<phone number> Enter Remote ext. (2xx) phone number
2xx 980 0
Enter Remote ext. (2xx) Turn off “Same Line Connect”
2xx 980 1
Enter Remote ext. (2xx) Turn on “Same Line Connect”
2xx 9 <Hunt Group>
Enter Remote ext. (2xx) “Connect using:” Hunt Group
(Hunt Group = 9, 81-88)
1xx 61
1xx 60
Enable ‘Do not Disturb’ at the Local Extension
Disable ‘Do not Disturb’ at the Local Extension
Appendices 119
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch-tone features dialed from a Local Extension.
Command
Function performed
Notes
1x1-1x8
Intercoms a Local Extension
x represents the Unit ID
Networked
2x1-2x8
250-299
Dials a Remote Extension (associated
with an external phone number).
x represents the Unit ID
Networked
Speed dial for VoIP calls. TalkSwitch will
hunt the VoIP ports, go off hook then
dial the digits entered.
300-309
Dials an Extension Ring Group. 10 in
total for the entire system. Mapped to
local extension(s), with specific fall
through options.
<flash> if
connected to a
caller
After putting a caller on hold, you receive
internal dialtone.
Puts caller on hold.
<flash> at
internal dialtone
To retrieve the caller on hold for the most
time, dial 7 at internal dialtone
It retrieves the most recent caller put on
hold.
<flash> at
external dialtone
Switches to internal dialtone. Used
mainly when an extension has Direct
Line Access enabled.
To transfer a caller to a mailbox, press
1x1-1x8
2x1-2x8
4x0-4x9
Dials into a local ext. voice mailbox.
Dials into a remote ext. voice mailbox.
Dials into a general ext. voice mailbox.
‘flash’ to place a call on hold, then
1x8, 2x1-2x8, or 4x0-4x9 and
hang up.
1x1-
Networked
x represents the Unit ID
To retrieve voicemail.
x represents the Unit ID
1x1-1x8
2x1-2x8
4x0-4x9
Internal voicemail retrieval/access.
accesses the mailbox associ-
ated to that extension.
Networked
Action performed after putting a caller on
Hold then dialing an indented destination.
Completes a transfer and returns to
internal dialtone
<flash>4
0
To make an announcement through the
attached external P.A. system.
External P.A. Access
120
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
Command
Notes
Function performed
<flash>5
Disconnects current caller and
reconnects immediately to the last
caller put on hold.
Press ‘flash’ to place a call on hold, then assign
Call Parking Spaces - 10 in total for
the entire system.
500-509
a parking space
500-509.
To pick up a parked call.
500-509
Parked Call Retrieval
Press ‘flash’ to put the first caller on hold, dial
another extension or external number, then
press ‘flash’ 6.
<flash>6
Conference Call for 3 parties.
User will hear confirmation. Reminder is played
every time the extension is picked up.
Enables ‘Do Not Disturb’ at the
current extension
61
60
User will hear confirmation.
Disables ‘Do Not Disturb’ at the
current extension.
To pick up a call ringing at another extension at
anytime including after the Auto Attendant
answers.
7 and 1xx
Call Pick up - Extension Specific
Or press ‘flash,’ then 7 to cycle through on a
first in / first out basis.
<flash>7
80
Hold Retrieve - used for retrieving any
calls placed on hold at that extension.
Put the caller on Hold, dial 80, and then dial
the outside number. Hang up to complete the
transfer. Can only be used when the line has
3-Way Calling/Conference or Transfer
(Centrex/Plexar) service.
Accesses Same Line Connect when
transferring an outside caller to
another outside number.
81-88, 9
80
Line Hunt Groups used to access a
line.
To toggle on or off music through the PA port.
Useful for office background music.
Play music source through PA output
To pick up a call ringing at any other extension.
9
Call Pick up
Enters command mode
If you have Direct Line Access enabled at your Local Extension, then you must first press ‘flash’
before using most of the functions listed.
Appendices 121
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch-tone features dialed at the Auto Attendant message from outside phones
Digit dialed
Function performed
0
User Defined – An Extension, Ring Group, Auto Attendant,
Voice mailbox, Announcement or perform no action.
1x1-1x4
1x1-1x8
Dials Local Extensions. x represents the Unit ID number.
2x1-2x8
Dials Remote Extensions associated with an external phone
number. x represents the Unit ID number (1-4).
250-299
300-309
Speed dial for VoIP calls. TalkSwitch will hunt the VoIP ports,
go off hook, then dial the digits entered.
Dials Extension Ring Groups – 10 in total for the entire
system. Mapped to Local Extensions(s), with specific fall
through options.
1,2,3,4,5
User Defined – An Extension, Ring Group, Auto Attendant,
Voice mailbox, Announcement or Perform no action.
6
Enters Call Back configuration.
7(xxx...)
PBX Transfer - A flash hook transfer with disconnect after
dialed. Usually used only in systems connected to another PBX.
81-88, 9
80
Access to line Hunt Groups for Call Bridge - Password
protected at the Auto Attendant.
Call Bridge using Same Line Connect. Requires 3-Way
Calling/Conference on the line.
1x1-1x8
2x1-2x8
4x0-4x9
4x0-4x9
Enter Internal voicemail to leave a message or listen to an
announcement. If you press 8 during the greeting, you can
access messages. x represents the Unit ID number.
Callers can directly also dial 400 series mailboxes
Internal voicemail retrieval/access.
x represents the Unit ID number.
1x1-1x8
2x1-2x8
4x0-4x9
122
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
Appendix D - Safety Precautions and Regulatory Information
Safety Precautions
Before using TalkSwitch, please review and ensure the following safety instructions
are adhered to:
1. Read, Follow and Retain Instructions – all safety and operating instructions
should be read, followed and retained for future reference before operating
the equipment.
2. Heed Warnings – all warnings on the equipment and in the operating
instructions should be adhered to.
3. Do not operate in environments where the temperature is below 0 degrees
Celsius or 32 degrees Fahrenheit. If the product was shipped in cold weather,
please let the system warm up at room temperature for at least 2 hours
before plugging it in to a power outlet.
4. Moisture – Do not place TalkSwitch in a high-humidity environment.
5. Heat – Never place TalkSwitch near heat sources such as radiators, floor
registers or in direct sunlight.
6. Power Supply – The equipment should only be connected to an approved
power supply of the type described in the operating instructions or marked
on the equipment. Use only the power adapter supplied with TalkSwitch.
7. Damage requiring service – Do not attempt to service the TalkSwitch
yourself. Unplug TalkSwitch and refer servicing to a licensed technician
when:
• The plug or power cord has been damaged.
• TalkSwitch has been exposed to moisture.
• TalkSwitch does not appear to be operating properly or exhibits a
marked change in performance.
Appendices 123
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Notices
FCC and IC Warnings
This equipment complies with Part 15 and 68 of the Federal Communications
Commission (FCC) rules in the United States. It also complies with regulations
RSS210 and CS-03 of Industry Canada and Science Canada. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
FCC Part 15:
NOTE: This equipment has been tested and found to comply with the limits for
a “CLASS B” Digital Device pursuant to Part 15 of the FCC rules. These limits
are designed to provide a reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with these
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different to that which the
receiver is connected.
• Consult the dealer or an experienced Radio/TV technician for help.
This CLASS B Digital apparatus meets all requirements of the Canadian
interference-causing equipment regulations.
Changes or modifications not expressly approved by Centrepoint Technologies Inc.
could void the user’s authority to operate the equipment.
124
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
FCC Part 68:
Notice: The Industry Canada label identifies certified equipment. This certification
means that the equipment meets telecommunications network protective,
operational and safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements document(s). The Department does not
guarantee that the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local Telecommunications Company. The
equipment must also be installed using an acceptable method of connection. The
customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated
by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure, for their own protection, that the electrical ground connections
of the power utility, telephone lines and internal metallic water pipe system, if
present, are connected together. This precaution may be particularly important in
rural areas.
Caution: Users should not attempt to make such connections themselves, but
should contact the appropriate electric inspection authority, or electrician, as
appropriate.
A label is located on the underside of the base unit containing both the FCC
registration number and Ringer Equivalency Number (REN) or the IC registration
number and Load Number. You must, upon request, provide this information to your
local telephone company.
The REN is used to determine the quantity of devices that may be connected to the
telephone line. Excessive RENs on the telephone line may result in the devices not
ringing in response to an incoming call. In most, but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local Telephone
Company.
This equipment is compatible with inductively coupled hearing aids.
Appendices 125
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Should you experience trouble with this telephone equipment, Model: CT-TS01, for
repair or warranty information please contact your reseller. See Appendix E,
“TalkSwitch One Year Limited Warranty”, for more information.
If the equipment is causing harm to the telephone network, the Telephone Company
may request that you disconnect the equipment until the problem is corrected.
This equipment cannot be used on public coin telephone services provide by the
telephone company. Connection to party line service is subject to state tariffs.
The FCC requires that you connect your cordless telephone to the nation-wide
telephone network through a modular telephone jack (USOC, RF11C, RJ11W, or
RJ14).
Your telephone company may discontinue your service if your equipment causes
harm to the telephone network. They will notify you in advance of disconnection, if
possible. During notification, you will be informed of your right to file a complaint
to the FCC.
Occasionally, your telephone company may make changes in its facilities,
equipment, operation, or procedures that could affect the operation of your
equipment. If so, you will be given advance notice of the change to give you an
opportunity to maintain uninterrupted service.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to
use a computer or any other electronic device, including Fax machines and Fax
modems, to send any message unless such message clearly contains a margin at the
top or bottom of each transmitted page or on the first page of the transmission, the
date and time it is sent and an identification of the business or other entity, or other
individual sending the message and the telephone number of the sending machine
or such business, other entity, or individual. (The telephone number provided may
not be a 900 number or any other number for which charges exceed local or long-
distance transmission charges.)
126
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
Appendix E - TalkSwitch One Year Warranty
The Original end-user purchaser acknowledges that he or she has read the limited
One-Year Warranty and Warranty Disclaimers and understands the same and agrees
to be bound by its terms and conditions.
Centrepoint Technologies Inc. warrants to the original end-user purchaser that
TalkSwitch meets applicable specifications (as set forth in the product descriptions in
the technical manuals) and to be free from defects in materials and workmanship
for a period of one year from the date of purchase (proof of purchase required). If
Centrepoint Technologies receives notice of such defects, Centrepoint Technologies
will, at its discretion, either repair or replace products that prove to be defective.
The above warranty shall not apply to defects resulting from improper or inadequate
maintenance, installation, end-user-supplied software or interfacing, modifications
or attempted modifications, misuse, damage from corrosive environments, moisture,
shipping, high voltage surges from external power sources such as power line,
telephone line or connected equipment, or operation outside of the specifications for
the product. This warranty is not valid when the product is sold by the original ‘end-
user’ purchaser or to any product with an altered or defaced serial number.
Incidental and consequential damages caused by malfunction, defect, or otherwise
and with respect to breach of any expressed or implied warranty are not the
responsibility of Centrepoint Technologies Inc. and to the extent permitted by law, are
hereby excluded both for property and to the extent not unconscionable, for personal
injury or damage.
In no event will Centrepoint Technologies be liable to the user for damages,
including any lost profits, lost savings or other incidental or consequential damages
arising out of or inability to use such product, even if Centrepoint Technologies or an
authorized Centrepoint Technologies dealer has been advised of the possibility of
such damages, or for any claim for any other party. In any event, the liability of
Centrepoint Technologies shall not exceed the purchase price of the product.
There is no assumption of liability as a consequence of any of the following events:
1. Shipment to or from Centrepoint Technologies Inc. or the customer; and
2. Forces beyond the control of Centrepoint Technologies Inc. including, but
not limited to, an act of God, war, insurrection, civil disturbances, natural
disasters, labour disputes or government regulations.
The original ‘end-user’ purchaser’s sole and exclusively remedy hereunder shall be
limited to repair or replacement specified herein.
Appendices 127
Download from Www.Somanuals.com. All Manuals Search And Download.
DOC Compliance
This digital apparatus does not exceed the Class B limits for radio noise emissions for
digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.
The FCC Statement is located in Appendix D, “Safety Precautions and Regulatory
Information”.
Warranty Service
To be eligible to obtain warranty service you must retain proof of purchase and
contact your reseller for warranty details. If you fail to provide proof of purchase, your
reseller and Centrepoint Technologies will not be able to provide you with any kind
of warranty service.
To obtain warranty service, products must be sent to your reseller or a service facility
designated by Centrepoint Technologies. The original end-user purchaser shall pay
all shipping charges, duties and taxes for products sent to Centrepoint Technologies
for warranty service. Centrepoint Technologies shall pay for return of the product to
the end-user purchaser.
128
TaDlkoSwwnloitacdhfrUomseWrwMw.aSnomuaanluals.com. All Manuals Search And Download.
To obtain Warranty service:
1. Contact your reseller and obtain a Warranty Return Authorization (WRA)
number if required. If you purchased the product directly from Centrepoint
Technologies, you can obtain this number by contacting the Technical
Support department at Centrepoint Technologies (613) 725-2980. Please
have your model and serial number available when you call.
2. Include a copy of your proof of purchase and a written explanation of the
problem; this will enable us to expedite your repair.
3. Attach the shipping label to the exterior of the package.
4. On the shipping label, be sure to include the WRA number obtained from
Centrepoint Technologies or your reseller.
5. Ship the product (prepaid) to your reseller. In the case of the product being
purchased from Centrepoint Technologies, send the unit in its original or
better protective packaging to:
Centrepoint Technologies
1545 Carling Ave. Suite 510
Ottawa, Ontario
K1Z 8P9
Canada
If the product is being shipped from outside of Canada, the following statement must
be included on the package. ‘Canadian Goods Being Returned to Canada’.
Failure to obtain a WRA number and include the information indicated above will
result in the package being refused.
Appendices 129
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix F - Return Policy
Products purchased from a reseller:
Check with your reseller on the specific details regarding their return policy.
Products purchased directly from Centrepoint Technologies:
Contact Centrepoint Technologies for details regarding the return policy. For
information regarding product servicing, please refer to the TalkSwitch One Year
Limited Warranty. Centrepoint Technologies will not accept product returns outside
of its return policy.
To Return products which were purchased directly from Centrepoint Technologies:
1. Obtain a Return Merchandise Authorization (RMA) number. You can obtain
this number by contacting the Technical Support department at Centrepoint
Technologies (613) 725-2980. Please have your model and serial number
available when you call. Products will not be accepted without an RMA
number.
2. Include a copy of your proof of purchase and a written explanation of the
reason for the return; this will allow us to expedite your refund.
3. Attach the shipping label to the exterior of the package.
4. On the shipping label, be sure to include the RMA number obtained from
Centrepoint Technologies.
5. Ship the product (prepaid and in its original packaging) to:
Centrepoint Technologies
1545 Carling Ave. Suite 510
Ottawa, Ontario
K1Z 8P9
Canada
If the product is being shipped from outside of Canada, the following statement must
be included on the package. ‘Canadian Goods Being Returned to Canada’.
Failure to obtain an RMA number and include the information indicated above will
result in the package being refused.
Important: The Centrepoint Technologies Return Policy applies only for products
purchased directly from Centrepoint Technologies. The Return Policy for products
purchased from an authorized Centrepoint Technologies dealer is determined by the
dealer (the retail outlet where the product was purchased). Please contact your retailer
for information regarding their return policy; do not return the product directly to
Centrepoint Technologies.
Appendices 131
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix G - Specifications
Extension Interface
Loop range
On hook voltage
Off hook loop voltage source
Off hook loop current
Ringing voltage
Ringing frequency
Total supported ringing load
Trunk type
0 to 600 ohms
35 volts
35 volts
27 to 40 mA
90 volts RMS
20 Hz - True Sine wave
5 REN
Loop start
RJ-11, 2 pin
600 ohms
-2.4 dBm
DTMF only
Yes
Connector type
Interface impedance
Dial tone level
Signaling type
Flash hook supported
C.O. Interface
Interface impedance
configurable -
900 ohms + 2uF
900 ohms
600 ohms + 2uF
600 ohms
Loop start
RJ-11, 4-pin
3,900 ohms
45 volts RMS @ 20Hz
1.8
Trunk type
Connector type
Ringing impedance
Ringing sensitivity
REN
Longitudinal balance
Signal level
69 dB
- 10 dB
Caller ID support
Distinctive ring supported
All lines
Yes
System
C.O. interfaces
4
8
1
1
Extension interfaces
RS-232, 9 pin interface
USB interface
Appendices 133
Download from Www.Somanuals.com. All Manuals Search And Download.
LAN interface
Memory expansion
Ethernet (10BaseT)
8, 16, 32, 64 MB
TalkSwitch Memory Cards
System
Music input
P.A. output
Power source
Phono jack (mono)
Phono jack (mono)
AC wall adapter
120VAC, 60Hz/16VAC 1.5 amp
Power switch
DTMF detectors
Push Button
12 @ -3dBm to -30dBm
Dial tone generators
Ring detectors
Power-failure pass through
12
4
Extension 4 connects to Line 1
Dimensions
Weight
(H) 51.6mm x (W) 203.2mm x
(L) 213.4mm
.860 kg
Approvals
FCC parts 15 and 68
Industry Canada CS-03
EN 60950 - 1992, including:
Amendments 1, 2, 3, 4, 11.
134
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix H - TalkSwitch and Power Interruptions
TalkSwitch settings and configurations:
In the event of a power failure, your TalkSwitch settings and configurations will not
be lost.
TalkSwitch’s feature settings (configuration) are stored in an EEPROM. An EEPROM
is a form of non-volatile memory. Non-volatile memory means that your feature
settings (configurations) remain in TalkSwitch’s memory despite interruptions in the
power supply.
Calling Features:
In the event of a power failure, no TalkSwitch features or capabilities (including
VoIP) will be available other than:
• Local Extension, 114, 124, 134 and 144 can make or receive calls on Line 1 of
their respective units
In the event of a power return, all TalkSwitch features and capabilities will be re-
established.
Mode Scheduling and Power Interruptions:
When the power supply to TalkSwitch has been interrupted, TalkSwitch’s internal
clock will continue to run for up to 12 hours. If you have enabled TalkSwitch’s
Automatic Mode Scheduling feature and it has been longer than 12 hours,
TalkSwitch will not function properly until the internal clock is reset via a Caller ID
call or with the TalkSwitch configuration software. When power is restored to
TalkSwitch, TalkSwitch will check the time and determine the mode it should be in
according to the configuration and set itself to that mode.
To check the current mode of operation, dial
command mode, then enter a password if required. Next, dial 30 then . TalkSwitch
will report the current mode.
at a Local Extension to enter
Appendices 135
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
* (Star/Asterisk Sign)
Auto Call Back
The character on the bottom left of your
touchtone telephone keypad.
Allows you to activate Call Back by
dialing one of TalkSwitch’s telephone
numbers, letting the call ring at least
once and then hanging up.
# (Pound Sign)
The character on the bottom right of
your touchtone telephone keypad. It is
also commonly called the number sign.
Call Back
A TalkSwitch feature which, once
activated, instructs TalkSwitch to call you
back at a preset Out-of-Office telephone
number. You can then access
TalkSwitch’s Call Bridge feature.
TalkSwitch offers two ways to activate
Call Back - Prompted and Auto.
3-Way Calling/Conference
A service provided by telephone
companies which allows you to connect
parties on three different telephone lines
together for one conversation.
Call Bridge
3-Way Conference Call
A TalkSwitch feature which ‘bridges’
together calls from two different remote
locations. Call Bridge allows you to place
long distance calls from your office
telephone lines even when you are
out of the office.
Connecting three parties together for one
telephone conversation. TalkSwitch offers
its own 3-Way Conference feature and
also allows you to use the 3-Way
Conference (Calling) service provided by
local telephone companies.
Call Forward
Analog
A TalkSwitch feature which forwards calls
to one of 10 or more Remote Extensions.
All sound actually begins in the form of
sine waves and must be in this form to be
heard by the human ear. Analog devices
(phones, answering machines, etc.)
transmit and receive sound in the form
of ‘sine waves’. The telephone lines in
your home are also designed to carry
analog signals (sine waves). TalkSwitch
is an analog device and will work with
any other analog device or telephone
system.
Caller ID
A service provided by telephone
companies which transmits information
about incoming calls (callers name and
telephone number). The Caller ID
information is transmitted between the
first and second ring.
Call Waiting
Auto Attendant Message
A service provided by telephone
companies which allows you to accept a
second incoming call on a telephone line
that is already in use. Call Waiting allows
you to ‘toggle’ from one caller to the
other.
TalkSwitch’s electronic attendant. A
self-recorded message that greets and
directs callers to select an extension
number based on information provided
in the message.
Glossary 137
Download from Www.Somanuals.com. All Manuals Search And Download.
Centrex/Plexar
systems, like TalkSwitch, are quite
sophisticated and can handle all sorts
of incoming and outgoing
communications, including phone
calls, faxes, and Internet messages.
Central Office Exchange Service. A type of
PBX service offered by the telephone
company on a ‘pay per service’ basis. All
call switching occurs at a local telephone
station instead of a company’s premises.
Conference Call
CNG
Connecting three or more parties
together for one conversation.
A ‘chirping’ tone emitted by fax modems
and most fax machines to initiate
contact with another fax
machine/modem.
Configuration
The way a system is setup. For TalkSwitch
the configuration is the collection of
values or options you have chosen for
each of TalkSwitch’s features. Together,
the settings for each of these features
(The configuration) determine what
TalkSwitch will do. TalkSwitch can be
configured using the Configuration
software or Telephone Keypad
Commands.
CO
Central Office.
COM Port
Communications Port. Internal virtual
pathways used to transmit data to and
from a PC’s exterior Serial Port and
software running on the PC. The majori-
ty of PCs have four Com Ports: COM1,
COM2, COM3, and COM4. Most software
programs gain access to the Com Ports
via system interrupts (IRQs) and only
two IRQs are reserved for the four ports.
If you have two devices using Com Ports
that share an IRQ, you cannot use the
devices simultaneously. Typically, COM1
and COM3 use IRQ4, while COM2 and
COM4 use IRQ3.
Connector
The part of a cable that plugs into a port
or interface to connect one device to
another. Most connectors are either male
or female.
CTI
Computer Telephony Integration.
Dialtone
Communications Software
Software that makes it possible to send
and receive data over telephone lines via
modems.
A tone used by the telephone company to
indicate to the user that the line is ‘free’
and available for making calls.
Digit
Compression (Data)
Any whole number from 0 to 9. The
numbers on your telephone keypad can
also be referred to as digits.
Storing information in a format that
requires less space than usual.
Compression saves transmission time,
capacity and storage space.
Digital
Digital devices (phones, answering
machines, etc.) convert analog sine
waves into digital signals (a combination
of zeroes and ones) for storage and/or
transmission over digital lines.The digital
signal is then converted back to analog
Computer Telephony Integration
Refers to systems that enable a computer
to act as a call center, accepting
incoming calls and routing them to the
appropriate device or person. Today’s CTI
138
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
sine waves, that can be heard by human
ears.
‘Extensions’ jacks located on the back
panel of your TalkSwitch.
Digitize
Extension (Remote)
To translate into a digital form. For
example, optical scanners digitize images
by translating them into bit maps. It is
also possible to digitize sound, video, and
any type of movement. In all these cases,
digitization is performed by sampling at
discrete intervals. To digitize sound, for
example, a device measures a sound
wave’s amplitude many times per second.
These numeric values can then be
recorded digitally.
A call forwarding number that can be
any telephone number, in any location.
FCC
Federal Communications Commission.
The FCC is the United States federal
regulatory agency responsible for the
regulation of interstate and international
communications by radio, television,
wire, satellite and cable.
Firmware
Distinctive Ring
Firmware is a combination of software
and hardware. More precisely, it is
software (programs or data) that has
been written onto hardware
(micro-chips). Micro-chips (ROMs,
PROMs and EPROMs) that have data or
programs recorded on them are called
firmware.
The ability to have more than one
telephone number that callers can dial to
reach the same telephone line. Each
Distinctive Ring number has a distinctive
ring cadence or ring sequence.
TalkSwitch recognizes Distinctive Ring 1
as 2 short rings. Distinctive Ring 2 is
identified as 3 short rings. (Distinctive
Ring is also referred to as: Ident-A-Ring,
Ident-A-Call, Ring Master, Teen Service,
Double Number, Personal Ringing, Ring
Plus, Smart Ring Service, Special Ring or
Customized Ringing).
Flash button
A button on your telephone. Pressing the
Flash button has the same effect as press-
ing the Link button or depressing and
releasing the ‘hang up’ (switch) hook on
a telephone. All of these actions will send
a signal to TalkSwitch to put calls on or
off hold.
Driver
A program that controls a device. Every
device, whether it is a printer, disk drive,
or keyboard, must have a driver program.
A driver acts like a translator between the
device and programs that use the device.
Home phone
A home phone is any telephone using the
same telephone line as one of
TalkSwitch’s Lines, but is not plugged
directly into the back of TalkSwitch as an
extension.
DTMF
Dual Tone Multi-Frequency. The system
used by touchtone telephones. DTMF
assigns a specific frequency, or tone, to
each key so that it can easily be identified
by a microprocessor.
Icon
A small picture that represents a
program, action or feature in the config-
uration software. When you click on an
icon, that program, action or
feature is activated.
Extension (Local)
A Local Extension is any telephone or
analog device (answering machine, fax,
etc.) that is plugged into one of the
Glossary 139
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom
LED
A dedicated voice service within a
Light Emitting Diode. An electronic
specified user environment. TalkSwitch
offers intercom capabilities between its
Local Extensions.
device that lights up when electricity is
passed through it. LEDs are used in dis-
plays on electronic devices such as com-
puters. TalkSwitch has five LEDs on its
front panel. They show which telephone
is in use, whether data is being trans-
ferred to or received from an attached PC,
and which Mode setting is in use.
Interface
Something that connects two separate
entities. A user interface is the part of a
program that connects the computer with
a human operator (user).
Link button
Internet
On most telephones, pressing the Link
button has the same effect as pressing the
Flash button or depressing and releasing
the ‘hang up’ (switch) hook. However, on
some telephones, the function of the Link
button is internal to the telephone and
pressing it will have no effect on
A global network connecting millions
of computers. Unlike online service
networks (.com, .ca, .net, etc.) which are
centrally controlled, the Internet is
decentralized by design. Each Internet
computer, called a host, is independent.
TalkSwitch.
ISDN
Modem
Integrated Services Digital Network. The
same lines are used for many different
types of services, such as telephone, data,
electronic mail and facsimile. ISDN
specifications let large quantities of data
(wide-bandwidth) flow from one location
to another using the public telephone
network. Under ISDN, a phone call can
transfer 64 kilobits of digital data per
second.
Acronym for MODulator-DEModulator. A
modem is a device or program that
converts digital information stored on a
Computer into analog signals for
transmission over telephone lines and, in
reverse, converts analog signals into
digital.
Modes
A TalkSwitch feature which allows you to
store two distinct incoming call handling
configurations (Mode 1 and Mode 2).
Keypad Commands
Combinations of digits that are used to
configure TalkSwitch from a touchtone
telephone.
Monitor (TalkSwitch Monitor)
A feature included with the Software
Configuration package. The Monitor
provides a graphical representation of
telephone traffic as it flows through the
TalkSwitch system.
Keypad (Telephone)
The push buttons on a telephone.
Key Telephone System
With Key Telephone Systems, access to
telephone lines and calling features is
controlled internally within each tele-
phone unit. Users can gain direct access
to telephone lines, etc. by pressing a key
(or button) on their telephone.
Msec - Millisecond
One thousandth of a second or one
thousand microseconds.
140
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Network
RJ-14
A group of two or more computer
systems linked together.
Registered Jacks 14 is a technical term
for a telephone jack that looks similar to
the standard RJ-11. However, the RJ-14 is
usually used to connect ‘two line’ tele-
phonic devices. It supports 4 conductors.
PBX
Private Branch Exchange. A PBX is a
private telephone network used within an
Enterprise. Access to telephone lines and
services are controlled by the PBX. A PBX
allows many users (extensions) to share
a smaller number of telephone lines and
have access to additional call handling
benefits (call hold, intercom calling,
etc.). TalkSwitch is a ‘mini’ or ‘micro’
PBX.
RJ-45
Registered Jacks 45 is a technical term
for a telephone jack that supports 8
conductors and is used generally for
Networking applications.
Prompted Call Back
Allows you to activate Call Back by
dialing one of TalkSwitch’s telephone
numbers, letting the Auto Attendant
answer and then entering the Call Back
settings.
Phone Load
See Ringing Equivalency.
Prompt
Routing
Recorded instructions delivered by voice
processing units. TalkSwitch provides
prompts for you when using such
features as Call Back, Call Bridge and
Selective Call Forward. Prompts are also
provided when configuring TalkSwitch
using a telephone Keypad and for callers
being put ‘on hold’.
Determining the path that a message or
call is to take over circuits. TalkSwitch
offers ‘routing’ of incoming calls using
DSP technology.
Serial Communication
A type of electronic communication that,
unlike parallel communication, requires
that data bits be sent one after the other.
Modems rely on serial communication to
send data over telephone lines.
Registered Jacks
Telephone and data plugs registered with
the FCC.
Ringing Equivalency
Shortcut Key
(Ringer Equivalency Number [REN]) A
number, determined in accordance with
the US Code of Federal Regulations,
which represents the ringer loading effect
on a line. A ringer equivalency number
of 1 represents the loading effect of a
traditional telephone set ringing circuit.
A special key combination that causes a
specific command to be executed.
Typically, shortcut keys combine the
Ctrl or Alt keys with some other keys. In
Windows environments, for example,
Ctrl andC is used as the shortcut key to
copy. On PCs, the function keys are also
often used as shortcut keys.
RJ-11
SIP
Registered Jacks 11 is the most common
modular jack in the world. It is usually
used to connect ‘single line’ telephonic
devices such as telephones, fax machines
and modems. It supports 2 conductors.
Session Initiation Protocol (SIP).
Developed by the Internet Engineering
Task Force (IETF), this is a signaling
protocol designed to be much more sim-
Glossary 141
Download from Www.Somanuals.com. All Manuals Search And Download.
ple and flexible than the H.323 protocol.
SIP uses the existing Internet and HTML
structures to provide VoIP transmissions.
In addition, SIP is more scalable, allow-
ing applications to grow in scope without
any concern for the existing architecture.
SIP gives network managers the flexibili-
ty to select any type of architecture, from
a heavily centralized network controlled
extensively by a server, to a less concen-
trated network where intelligence is
used on ISDN (digital) lines. Terminal
Adapters are somewhat similar to
modems.
Touchtone telephone
A push-button telephone which emits
distinctive (DTMF) tones as different but-
tons on the keypad are pressed.
Two Line Telephone
A telephone which allows you to make
and receive calls on two separate
telephone lines.
found at the endpoints that communi-
cate directly with each another.
TX/RX
S/sec
An acronym for transmit and receive.
Samples per second.
USB
Serial Port
Short for Universal Serial Bus, the USB
connection supports more bandwidth
than a serial or parallel connection.
Serial Ports are physical ‘plug-ins’.
They allow two devices to exchange
information or data. A Serial Cable is
used to connect the two Serial Ports
together.
Virtual Extension
A telephone or other communications
device not physically connected to
TalkSwitch as an extension, but which
provides the same functionality. In
general, the term ‘virtual’ distinguishes
something that is merely conceptual
from something that has physical reality.
TalkSwitch’s Remote Extensions are
virtual extensions.
SOHO
Acronym for Small Office/Home Office.
It’s a burgeoning market comprised of
solo professionals, part-time work-at-
homes, telecommuters and small
businesses.
Tel Lines 1, 2, 3, or 4
A jack or plug-in on the back panel of
TalkSwitch which can accept a RJ-11
plug from either a telephone line or PBX
system. A single line telephone cable can
be plugged into this jack and will
become a usable TalkSwitch Line.
Telephone Keypad
Voicemail (Call Answer)
A service provided by TalkSwitch or
telephone companies which gives callers
the opportunity to leave a message when
your extension or telephone line is busy
or unanswered.
The collection of push buttons on a
touchtone telephone.
VoIP
Voice over IP is a term used to describe
the technology of taking voice and then
applying algorithms to digitize, compress
and carry the data over an IP connection.
Telephone Wall Jack
A wall outlet for a standard telephone
jack.
Terminal Adapter
A device that allows analog devices to be
142
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
# (Pound Sign) . . . . . . . . . . . . . . . .137 Call Waiting . . . . . . . . . . . .27, 115, 137
* (Star/Asterisk Sign) . . . . . . . . . . . .137 Caller ID (Call Display) . . .27, 137, 115
3-Way Calling . . . . . . . . . . . . . . . . . . 27 Caller in queue reminder . . . . . . . . . .71
3-Way Calling wait time . . . . . . . . . .74 Centrex Transfer . . . . . . . . . . . . . . . . .82
3-Way Calling/Conference . . . 116, 137 Centrex/Plexar . . . . . . . . . . . . . . . . .138
3-Way Conference Call . . . . . . . . . . 137 Centrex/Plexar Transfer . . . . . . . . . .116
6' RJ-11 Telephone Cable . . . . . . . . . . 1 CNG . . . . . . . . . . . . . . . . . . . . . . . . . .138
About TalkSwitch . . . . . . . . . . . . . . . .19 CO . . . . . . . . . . . . . . . . . . . . . . . . . . .138
AC Power Adapter . . . . . . . . . . . . . . . .1 COM Port . . . . . . . . . . . . . . . . .107, 138
Accepting the Call Back . . . . . . . . . . . 98 Communications Software . . . . . . . .138
Accessing a Voice mailbox . . . . . . . . 91 Compression (Data) . . . . . . . . . . . . .138
Activate the Auto Attendant . . . . . . . . 96 Computer Telephony Integration . .138
Activating Call Back . . . . . . . . . . . . .97 Conditional call forwarding . . . . . . . .88
Adjust Sequence . . . . . . . . . . . . . . . . .52 Conference . . . . . . . . . . . . . . . . . . . . .27
Allow Call Bridge . . . . . . . . . . . . .64, 66 Conference Call . . . . . . . . . . . . . . . .138
Analog . . . . . . . . . . . . . . . . . . . . . . .137 Conference calling . . . . . . . . . . . . . . .84
Announced Message . . . . . . . . . .63, 66 Configuration . . . . . . . . . . . . . . .17, 138
Answer at ext. . . . . . . . . . . . .56, 58, 60 Configuration Software . . . . . . . . . . .15
Attach a Modem . . . . . . . . . . . . . . . . . 6 Connect using . . . . . . . . . . . . . . . . . . .34
Attaching phones . . . . . . . . . . . . . . . . .5 Connecting Devices to the Music
Attaching telephone lines . . . . . . . . . . .5 and PA Jacks . . . . . . . . . . . . . . . . . . . . .6
Audio output options . . . . . . . . . . . . .72 Connecting TalkSwitch to a PC . .6, 7, 8
Auto Attendant . . . . . . . . . . . . . . . . . .44 Connector . . . . . . . . . . . . . . . . . . . . .138
Auto Attendant Message . . . . . . .49, 137 Copyright Information . . . . . . . . . . . . .ii
Auto Call Back . . . . . . . . . . . .61, 62, 98 Customer Support . . . . . . . . . . . . . . .105
Automatic call forwarding . . . . . . . .87 Dialing prefix . . . . . . . . . . . . . . .63, 65
Automatic Mode Switching . . . . .43, 95 Dialtone . . . . . . . . . . . . . . . . . . . . . .138
Back Panel . . . . . . . . . . . . . . . . . . . . . .3 Direct Line Access . . . . . . . . . . . . .33, 87
Busy at extension . . . . . . . . .55, 58, 60 Distinctive Ring . . . . . . . . . . . .115, 139
Call Back . . . . . . . . . . . . . . . . . . . . .137 Distinctive Ring Numbers . . . . . . . . .26
Call Back / Call Bridge . . . . . . . . . . .60 Do not Disturb . . . . . . . . . . . . . . . . . .56
Call Back / Call Bridge Settings . . . . .19 Double flash . . . . . . . . . . . . . . . . . . .117
Call Back ring return . . . . . . . . . . . .71 Double Flash time . . . . . . . . . . . . . . .74
Call Bridge . . . . . . . . . . . . . . . . .67, 137 DTMF . . . . . . . . . . . . . . . . . . . . . . . .139
Call Cascade . . . . . . . . . . . . . .55, 56, 57 DTMF Functions . . . . . . . . . . . . . . . .119
Call Forward . . . . . . . . . . . . . . . .59, 137 E1 - E8 . . . . . . . . . . . . . . . . . . . . . . . . .3
Call Forwarding . . . . . . . . . . . . . . . . .87 Erase Instructions . . . . . . . . . . . . . . . .49
Call Handling . . . . . . . . . . . . . . . .19, 43 Extension Ring Groups . . . . . . . .36, 59
Call Hold and Flash . . . . . . . . . . . . .116 Extensions to ring on incoming call
Call Park . . . . . . . . . . . . . . . . . . . . . . .82 (before Auto Attendant answers) . . . .51
Call Pick Up/Call Grab . . . . . . . . . . . .81 External modem . . . . . . . . . . . . . . . . .87
Call Queue . . . . . . . . . . . . . . . . . . . . .83 Fax call is detected . . . . . . . . . . . . . . .47
Index 145
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax Information . . . . . . . . . . . . . . . . .30 Parallel phone . . . . . . . . . . . . . . . . . .86
Fax Machine . . . . . . . . . . . . . . . . . . . . .5 Park Orbit . . . . . . . . . . . . . . . . . . . . . .82
FCC . . . . . . . . . . . . . . . . . . . . . .124, 139 Password on Call Back . . . . . . . . .63, 66
Firmware . . . . . . . . . . . . . . . . . . . . . .139 PBX . . . . . . . . . . . . . . . . . . . . . . .71, 141
Flash button . . . . . . . . . . . . . . . . . . .139 PBX extension length . . . . . . . . . . . . .71
Flash Lengths . . . . . . . . . . . . . . . . . . .73 Personal options . . . . . . . . . . . . . . . . .93
Front Panel . . . . . . . . . . . . . . . . . . . . . .2 Placing calls on Hold . . . . . . . . . . . . .81
General mailboxes . . . . . . . . . . . . . . .91 Placing Intercom calls . . . . . . . . . . . .80
Greeting options . . . . . . . . . . . . . . . . .92 Play Auto Attendant . . . . . . . . . . . . . .51
Home phone . . . . . . . . . . . . . . . . . . .139 Power . . . . . . . . . . . . . . . . . . . . . . . . . .4
How to use Call Bridge . . . . . . . . .67, 96 Power Interruptions . . . . . . . . . . . . .135
Hunt Group Restriction . . . . . . . . . . .87 Power/Data . . . . . . . . . . . . . . . . . . . . . .2
Hunt or Rollover . . . . . . . . . . . . . . . .116 Prompt . . . . . . . . . . . . . . . . . . . . . . .141
Hunt/Rollover . . . . . . . . . . . . . . . . . . .27 Prompted Call Back . . . . . . . .62, 65, 97
Intercom . . . . . . . . . . . . . . . . . . . . . .140 Quick Commands . . . . . . . . . . . . . . .119
Internal clock setting . . . . . . . . . . . . .72 Record Instructions . . . . . . . . . . . . . .49
Internal Voicemail System . . . . . . . . .90 Recording Auto Attendant messages .45
LAN PORT . . . . . . . . . . . . . . . . . . . . . . .3 Regulatory Information . . . . . . . . . .123
LED lights . . . . . . . . . . . . . . . . . . . . . . .2 Remote Extension mailboxes . . . . . .91
Line Hunt Groups . . . . . . . . . . . . . . . .29 Remote Extensions . . . . . . . . . . . .33, 57
Link button . . . . . . . . . . . . . . . . . . . .140 Return Policy . . . . . . . . . . . . . . . . . .131
Local Extensions . . . . . . . . . . . . . .31, 55 Ring extensions only (no Auto
Local Extensions mailboxes . . . . . . . .91 Attendant is played . . . . . . . . . . . . . . .51
Make another call . . . . . . . . . . . . . . .96 RJ-11 . . . . . . . . . . . . . . . . . . . . . . . . .141
Making and Receiving Calls . . . . . . .80 Routing options . . . . . . . . . . . . . . . . .55
Manual call forwarding . . . . . . . . . . .88 Safety Precautions . . . . . . . . . . . . . .123
Manual Mode Switching . . . . . . . . . .95 Save to file . . . . . . . . . . . . . . . . . . . . .18
Memory Usage . . . . . . . . . . . . . . . . . .18 Save to TalkSwitch . . . . . . . . . . . . . . .18
Memory Slot . . . . . . . . . . . . . . . . . . . . .4 Screened Transfer . . . . . . . . . . . . . . . .82
Menu Items . . . . . . . . . . . . . . . . . . . . .17 Screening options . . . . . . . . . . . . . . . .88
File . . . . . . . . . . . . . . . . . . . . . . . . . .18 Serial . . . . . . . . . . . . . . . . . . . . .4, 6, 106
Help . . . . . . . . . . . . . . . . . . . . . . . . .19 Service . . . . . . . . . . . . . . . . . . . . . . . .126
Setup . . . . . . . . . . . . . . . . . . . . . . . .18 Set Ring Group . . . . . . . . . . . . . . . . . .36
Utilities . . . . . . . . . . . . . . . . . . . . . . .18 System Information . . . . . . . . . . .19, 21
Miscellaneous . . . . . . . . . . . . . . . . . . .71 system requirements . . . . . . . . . . . . . .15
Mode Switching . . . . . . . . . . . . . .44, 95 TalkSwitch CD . . . . . . . . . . . . . . . . . .15
Modes . . . . . . . . . . . . . . . . . . . . .43, 140 TalkSwitch Memory cards . . . . . . . . .45
Monitor . . . . . . . . . . . . . . . . . . . . . . .140 Telephone Company Calling
Music . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Services . . . . . . . . . . . . . . . . . . . . . . .115
Music-on-hold . . . . . . . . . . . . . . .37, 94 Telephone Company Voicemail . . . . .27
No answer at ext. . . . . . . . . . .56, 58, 60 Telephone Lines . . . . . . . . . . . . . .25, 50
Non-detection of disconnect-clear . . .74 Time Scheduler . . . . . . . . . . . . . . . . . .95
Open File . . . . . . . . . . . . . . . . . . . . . . .18 Touchtone phone . . . . . . . . . . . . . . .107
Options . . . . . . . . . . . . . . . . . . . . .20, 68 Transferring calls . . . . . . . . . . . . . . . .81
PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Transferring from a Home phone . . .70
146
TalkSwitch User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting . . . . . . . . . . . . . . . . .73
Two-line Analog Telephone . . . . . . . . .5
Unscreened Transfer . . . . . . . . . . . . . .82
USB . . . . . . . . . . . . . . . . . . . . . .4, 6, 106
Use Same Line Connect . . . . . . . . . . .35
View Auto Attendant Memory Usage .50
Voice mailboxes . . . . . . . . . . . . . . . . .91
Voicemail (Call Answer) . . . . . . . . . .115
Voicemail Manager . . . . . . . . . . . . . . .18
Warranty . . . . . . . . . . . . . . . . . . . . . .127
Warranty Service . . . . . . . . . . . . . . . .128
Index 147
Download from Www.Somanuals.com. All Manuals Search And Download.
|