SysKonnect
User Manual
Wireless LAN Cardbus Adapter
SK-54C1
Download from Www.Somanuals.com. All Manuals Search And Download.
SysKonnect SK-54C1
Wireless LAN Cardbus Adapter
User Manual
(v1.00 / 29 July, 2005)
Visit our web site: http://www.syskonnect.com
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Copyright © SysKonnect GmbH, 2005. All rights reserved.
This manual refers to the SysKonnect SK-54C1 Wireless LAN Cardbus Adapter. Contents are
subject to change. Product and brand names are (registered) trademarks of their appropriate
owners.
Please send your comments on this documentation to:
SysKonnect GmbH
®
A Marvell Company
Information Development
Siemensstraße 23
76275 Ettlingen / Germany
Fax: +49 7243 502 989
E-Mail: manual@syskonnect.de
Download from Www.Somanuals.com. All Manuals Search And Download.
Conventions
The following conventions apply in this manual.
Warnings and Notes
Used to indicate a potentially hazardous situation which, if not avoided, could result in death
or serious injury. Example: dangerous voltage.
Used to indicate a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. Example: electrostatic discharge.
Used for additional information and advice.
i
Font Styles applied
Italics:
Italics is used for the following elements:
•
•
In bodytext as an introduction of new technical terms
In instructions for radio buttons and check boxes
Examples:
The station is operated in Repeater Mode.
Select the Sharing radio button.
Select the Enable Bidirectional Support check box.
SMALL CAPS:
SMALL CAPS is used for the following elements:
•
•
•
•
Menu options
Buttons
Tabs
Entries in a list box
Examples:
In the main menu, select EXIT.
Click the CONNECT button.
Select the tab PORTS.
The top line in the printer list (HP LASERJET 4M) indicates
that the HP laserjet printer 4M is installed on this PC.
Quotation
Marks (“ ”)
Quotation Marks are used for the following elements:
•
•
•
Window/screen names
Field names
List box names
Examples:
The “Create NDPS Manager Object” window is displayed.
Type a name in the field “NDPS Manager Name”.
The list “Network” is displayed, containing all installed net-
work components.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Conventions
Courier:
Courieris used for the following elements:
•
•
Terminal input to be entered by the user
Terminal output issued by the system
Examples:
Enter sk98diag.
If the test was successful, the message passedis issued.
Underline is used to identify hyperlinks.
Underline
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Figures
Figure 9: Setup Screen for Marvell Client Configuration Manager
Figure 42: Signal Strength Section
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Table of Figures
Figure 50: Setup Screen for Marvell Client Configuration Manager
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
To protect yourself from injuries and avoid damage of the SysKonnect SK-54C1 Wireless LAN
Cardbus Adapter, always observe the following safety instructions.
Avoiding Injuries
Electrical current!
Electrical current from power, phone, and communications cables can be hazardous.
Never touch any electrical elements with bare hands.
To avoid potential shock hazards:
•
Do not carry out any installation, maintenance, or (re)configuration work during a thun-
derstorm.
•
•
Do not connect or disconnect any power cables during a thunderstorm.
Unplug this device from its power source before cleaning. Use only a slightly dampened
cloth for cleaning. Do not use liquid or aerosol cleaners.
•
•
Do not use this product near water.
This device should only be used with the power supply type specified on the marking
label. If you are not sure of the type of your local power supply, consult your dealer or the
local power company.
•
•
•
Do not pinch, crimp or otherwise damage the power cord. For transportation, ensure that
the cable is properly shielded and does not pose a tripping hazard.
If using an extension cord, make sure the total ampere rating of the products using the
cord does not exceed the extension cord's ampere rating.
Do not attempt to service this device, as opening or removing the casing may expose you
to dangerous voltage points or other risks. Refer all servicing to qualified service person-
nel.
•
•
Do not touch or move antenna while the unit is transmitting or receiving.
Do not hold any component containing the radio such that the antenna is very close or
touching any exposed parts of the body, especially the face or eyes, while transmitting.
•
The SysKonnect SK-54C1 Wireless LAN Cardbus Adapter should be serviced by quali-
fied service personnel under the following conditions:
•
•
•
•
The power cord is damaged or frayed.
Liquid has been spilled onto the product.
The product has been exposed to rain or water.
The product does not operate normally in accordance with the operating instruc-
tions.
•
The device has been dropped or the casing has been damaged.
Electrical installations must comply with the safety regulations of the country in which they are
operated.
i
Do not operate a portable transmitter (such as a wireless network device) near unshielded
blasting caps or in an explosive environment unless the device has been modified to be qual-
ified for such use.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Safety Precautions
Avoiding Damage
Electrostatic discharge!
Electrostatic discharge may damage or destroy the SysKonnect SK-54C1 Wireless LAN
Cardbus Adapter.
To avoid damaging the SysKonnect SK-54C1 Wireless LAN Cardbus Adapter observe the fol-
lowing:
•
•
Never use force when working with the SysKonnect Cardbus Adapter.
Do not place the SysKonnect Cardbus Adapter on an unstable surface. The device may
fall causing serious damage to the device.
•
•
Avoid unnecessary movement since this can increase electrostatic charge.
Use in specific environments:
•
The use of wireless devices in hazardous locations is limited by the constraints
posed by the safety directors of such environments.
•
The use of wireless devices in hospitals is restricted to the limits set forth by each
hospital.
Regulations of the FCC and the Federal Aviation Administration (FAA) prohibit airborne oper-
ation of radio-frequency wireless devices because their signals could interfere with critical air-
craft instruments.
FCC Safety Notices
The FCC in ET Docket 96-8 has adopted a safety standard for human exposure to RF electro-
magnetic energy emitted by FCC certified equipment. The SysKonnect SK-54C1 Wireless
LAN Cardbus Adapter meets the Human Exposure limits found in OET Bulletin 65, 2001, and
ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in
this manual results in exposure substantially below the limits recommended by FCC.
This product has passed all necessary tests that classify the product as a mobile device that
can be operated in close proximity to the human body.
The device is approved for mobile and laptop computer use with similar installation and oper-
ating configurations. The SysKonnect Cardbus Adapter is a wireless device with an integrat-
ed antenna. To comply with the FCC and ANSI C95.1 RF exposure limits when using such a
wireless device inserted into a laptop computer, it is recommended that the antenna should
not be positioned closer than 5 cm (2 inches) from the body or nearby persons. It is recom-
mended that the user limit exposure time if the antenna is positioned closer than 5 cm (2 inch-
es).
The device must not be co-located or operating in conjunction with any other antenna or radio
transmitter. Installers and end users must follow the installation instructions provided in this
manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Introduction
Overview
This manual explains how to install the following hardware and software on a Microsoft Win-
dows based computer with a cardbus adapter slot:
•
•
SysKonnect SK-54C1 Wireless LAN Cardbus Adapter
SysKonnect SK-54C1 Wireless LAN Cardbus Adapter Driver for Windows XP or
Windows 2000
•
•
Marvell Wireless Client Card Configuration Utility
Odyssey Client
System Requirements
The minimum system requirements for installing and using the adapter are as follows:
•
•
•
•
Microsoft Windows XP or Windows 2000 operating system
400 MHz or higher CPU
128 MB of RAM
800 kB of free disk space for the installation of the driver and the Marvell Configuration
Utility
•
CD-ROM drive
Package Contents
The package includes the following items:
•
•
SysKonnect Cardbus Adapter
SysKonnect adapter software containing:
•
•
•
•
Marvell Wireless Client Card Configuration Utility
SysKonnect Adapter Driver for Windows XP
SysKonnect Adapter Driver for Windows 2000
Odyssey Client
•
Documentation:
•
•
SysKonnect Cardbus Adapter User Manual
Release Notes (if applicable)
Download from Www.Somanuals.com. All Manuals Search And Download.
14
1 Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Driver Installation
This chapter explains how to install the SysKonnect Windows drivers on a Windows based
(XP or 2000) PC computer.
The Windows XP or Windows 2000 adapter driver provides the interface between the
SysKonnect Cardbus Adapter and the computer.
The following topics are covered:
•
•
There are two folders on the installation CD-ROM corresponding to the drivers for the two dif-
ferent Windows operating systems:
root\ ... \WinXP
i
root\ ... \Win2K
When prompted for the driver for your system, select the appropriate folder.
Installing the Windows XP Driver
To install the Windows XP driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows XP.
Windows detects the SysKonnect Cardbus Adapter during the boot operation automati-
cally. If the computer does not find the new hardware, go to chapter 6 “Troubleshooting”
The window “Found New Hardware Wizard” is displayed.
Figure 1. Windows XP – Found New Hardware Wizard
Download from Www.Somanuals.com. All Manuals Search And Download.
16
2 Driver Installation
2. Select the radio button Install from a list or specific location (Advanced).
3. Click NEXT.
In the same window, the menu “Please choose your search and installation options” is
displayed.
Figure 2. Windows XP – Search and Installation Options
4. Select the radio button Search for the best driver in these locations.
5. Select the check box Include this location in the search.
6. Enter the path to the directory that contains the driver
or
click the BROWSE button to locate the directory.
7. Click NEXT.
In case the adapter has not passed Windows Logo testing to verify its compatibility with
Windows XP, the window “Hardware Installation” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows 2000 Driver
17
Figure 3. Windows XP – Hardware Installation
8. To continue the installation, click CONTINUE ANYWAY.
The menu “Please wait while the wizard installs the software” is displayed.
9. Click NEXT.
The menu “Completing the Found New Hardware Wizard” is displayed.
10. Click FINISH to complete the installation.
Service Pack 2
Windows XP Service Pack 2 provides an updated wireless networking infrastructure to en-
able easier setup and management of wireless connections. The new Wireless LAN Client
will work with a broad range of wireless hot spots, allowing customers to connect seamlessly
without having to install or update a third-party client. A new user interface also allows cus-
tomers to more easily disconnect from hot spots.
Installing the Windows 2000 Driver
To install the Windows 2000 driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows 2000.
Windows detects the SysKonnect Cardbus Adapter during the boot operation automati-
cally. If the computer does not find the new hardware, go to chapter 6 “Troubleshooting”
The window “Found New Hardware Wizard” is displayed.
2. Click NEXT.
In the same window, the menu “Install Hardware Device Drivers” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
2 Driver Installation
Figure 4. Windows 2000 – Install Hardware Device Drivers
3. Select Search for a suitable driver for my device (recommended).
4. Click NEXT.
The menu “Locate Driver Files” is displayed.
Figure 5. Windows 2000 – Locate Driver Files
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows 2000 Driver
19
5. Select Specify a location.
6. Click NEXT.
The window “Upgrade Device Driver Wizard” is displayed.
Figure 6. Windows 2000 – Search for Driver Files
7. Enter the path to the directory that contains the driver,
or
click the BROWSE button to locate the directory.
8. Click OK.
The menu “Driver Files Search Results” is displayed.
Figure 7. Windows 2000 – Driver Files Search Results
9. Click NEXT.
In case the driver does not have a Microsoft Digital Signature yet, the window “Digital
Signature Not Found” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
2 Driver Installation
Figure 8. Windows 2000 – Digital Signature Not Found
10. To continue the installation, click YES.
The menu “Hardware Install” is displayed indicating that installation is in progress. This
process may take a few minutes.
The window “Completing the Found New Hardware Wizard” is displayed.
11. Click FINISH to complete the installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Marvell Configuration Utility
The Marvell Wireless Client Card Configuration Utility is a Microsoft Windows application that
allows configuration and management of the SysKonnect Cardbus Adapter. The Marvell Con-
figuration Utility sets up profiles and performs other wireless network management tasks.
This chapter contains detailed instructions on how to install the utility and shows how to use
the Configuration Utility to configure and use the adapter.
Installing the Marvell Configuration Utility
To install the Marvell Configuration Utility, proceed as follows:
1. Turn on the computer.
2. Navigate to the drive where the Marvell Configuration Utility files are located.
3. Change to the directory \Utils.
4. Double-click SETUP.EXE.
Windows starts the setup wizard and displays the following window:
Figure 9. Setup Screen for Marvell Client Configuration Manager
and Odyssey Client
1. To install both, the Marvell Configuration Utility and the Odyssey Client Manager, activate
both checkboxes in the Setup menu. (More information on the Odyssey Client Manager
If only the Marvell Configuration Utility shall be installed, activate only the first checkbox.
2. For security reasons, activate YES for the option “Do you want to disable Zero Configura-
tion?” (only valid for Windows XP systems).
3. Click INSTALL.
The window “InstallShield Wizard” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
3 Marvell Configuration Utility
Figure 10. Configuration Utility – InstallShield Wizard
4. Click NEXT.
In the same window, the menu “License Agreement” is displayed.
Figure 11. License Agreement
5. Select I accept the terms in the license agreement.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Marvell Configuration Utility
23
6. Click NEXT.
The menu “Customer Information” is displayed.
Figure 12. Customer Information
7. Enter a name in the field “User Name”.
8. Enter an organization in the field “Organization”.
9. Click NEXT.
The menu “Destination Folder” is displayed.
10. Click NEXT to install the configuration utility in the default folder
or
click CHANGE to enter a different path.
The menu “Ready to Install the Program” is displayed.
11. Click INSTALL to start the installation.
The menu “Installing Utility” is displayed.
The Marvell Configuration Utility is installed. When the Setup Wizard is finished, the
menu “Installation Complete” is displayed.
12. Click FINISH to complete the installation of the Marvell Configuration Utility.
If in the Setup menu both checkboxes (for the Marvell Configuration Utility and the Odys-
sey Client) have been activated, the installation program for the Odyssey Client launches
automatically. (For further details, see chapter 4 “Odyssey Client” on page 49.)
Download from Www.Somanuals.com. All Manuals Search And Download.
24
3 Marvell Configuration Utility
Uninstalling the Marvell Configuration Utility
To uninstall the Marvell Configuration Utility, proceed as follows:
1. Click START > SETTING > CONTROL PANEL.
The window “Control Panel” is displayed.
2. Double-click ADD/REMOVE PROGRAMS.
The window “Add/Remove Programs” is displayed.
Figure 13. Add/Remove Programs
3. Select the MARVELL(R) WIRELESS CLIENT CARD CONFIGURATION UTILITY entry from the list
of currently installed programs.
4. Click REMOVE to uninstall the program.
Configuring the Marvell Configuration Utility
This section describes the functions of the Marvell Wireless Client Card Configuration Utility
for the SysKonnect SK-54C1 Wireless LAN Cardbus Adapter.
Windows XP Users
For Windows XP, use either the Windows XP Zero Configuration Utility or the Marvell Config-
uration Utility to configure the SysKonnect Cardbus Adapter.
To use the Marvell Configuration Utility, the Zero Configuration Utility must be deactivated as
follows:
1. Click the WIRELESS icon on the desktop.
2. Click PROPERTIES.
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the Marvell Configuration Utility
25
The window “Wireless Network Connection Properties” is displayed.
3. Click the tab WIRELESS NETWORKS.
4. Deactivate the checkbox Use Windows to configure my wireless settings.
Figure 14. Zero Configuration Utility
When the Marvell Configuration Utility is opened, the Windows XP Zero Configuration Utility
will be closed automatically by the Marvell Configuration Utility.
Once the user exits the Marvell Configuration Utility, the Windows XP Zero Configuration Util-
ity is restored to manage the wireless configuration.
Running the Marvell Configuration Utility
Once installed, the Marvell Configuration Utility is accessed as follows:
1. Click the START menu.
2. Select PROGRAMS > MARVELL LIBERTAS(TM) 802.11G CLIENT > MARVELL LIBERTAS CLIENT
CONFIGURATION MANAGER.
or
from the desktop, double-click the MARVELL LIBERTAS CLIENT CONFIGURATION MANAGER
icon.
Figure 15. Marvell Libertas Client Configuration Manager Icon
Download from Www.Somanuals.com. All Manuals Search And Download.
26
3 Marvell Configuration Utility
Tray Status Icons
Different icons in the system tray indicate the status of the wireless connection:
Adapter Unplugged
(red with “X” mark)
Not Connected
(red)
Connected
(green)
Figure 16. Tray Status Icons
Configuration Utility Window
The “Configuration Utility” window displays the following tabs:
•
NETWORK STATUS – displays the status of the network to which the user is connected.
The Marvell Configuration Utility opens on this page. See section “Network Status
•
PROFILE MANAGER – displays the current profiles and allows the user to set attributes for
network type, security options, and protocols, as well as create/modify/delete profiles.
•
•
•
•
•
page 42 for details.
44 for details.
details.
The following sections explain how to use the Marvell Configuration Utility.
Should the Marvell Configuration Utility fail to detect the adapter, see chapter 6 “Trouble-
shooting” on page 55 for possible solutions.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Status Tab
27
Network Status Tab
The NETWORK STATUS tab displays the status of the network. When the Marvell Configuration
Utility opens, it displays the NETWORK STATUS tab.
Figure 17. Network Status Tab
Select Profile
The section “Select Profile” displays the name of the profile in use. Additional information
about the profile is provided in the PROFILE MANAGER tab.
Select one of the profiles previously defined by clicking the down arrow and highlighting a pro-
file from the pulldown list.
Figure 18. Select Profile Section
Profiles are created, modified, and deleted through the Profile Manager.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
3 Marvell Configuration Utility
Link Information
The “Link Information” section contains the current information about the wireless connection.
Figure 19. Link Information Section
•
“Status” – the status of the wireless network connection:
• Card Unplugged– adapter plugged in, but not recognized.
• Connected– adapter plugged in and connected to a wireless network.
• Not connected – adapter plugged in, but cannot find a wireless network.
• No Radio– adapter plugged in, but the radio is turned off.
To turn the radio on, deactivate the Radio Off checkbox at the bottom of the tab.
•
•
“Network SSID” – network SSID label (i.e., network name). The network name is a text
string of up to 32 characters.
“Network Type” – type of environment to which you are connected.
The choices are:
• Infrastructure – In this mode, wireless clients send and receive information
through access points. When a wireless client communicates with another, it trans-
mits to the access point. The access point receives the information and rebroadcasts
it. Other devices then receive the information.
Acess points are strategically located within an area to provide optimal coverage for
wireless clients. A large WLAN uses multiple access points to provide coverage over
a wide area. Access points can connect to a LAN through a wired Ethernet connec-
tion. Access points send and receive information from the LAN through the wired
connection.
• Ad Hoc– In this mode, wireless clients send and receive information to other wire-
less clients without using an access point. This type of WLAN only contains wireless
clients.
Use Ad-hoc mode to network computers at home or in small offices, or to set up a
temporary wireless network for a meeting.
•
“Network BSSID” – Network Basic Service Set Identifier. The BSSID is a 48-bit identity
used to identify a particular BSS within an area. In Infrastructure BSS networks, the
BSSID is the MAC address of the access point.
In independent BSS or Ad-hoc networks, the BSSID is generated randomly.
•
•
“Security” – reports the type and level of security set. The security level is set through the
“Profile Setting” of the PROFILE MANAGER tab. Configure WEP settings also through the
SITE SURVEY tab when connecting to a network.
“Link Speed” – connection speed (i.e. 54 Mbit/s, 48 Mbit/s, etc.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Status Tab
29
Signal Strength / Wireless Mode Indicator
The color-coded “Signal Strength” bar displays the signal strength of the last packet received
by the adapter:
b means connected to an 802.11b capable AP.
g means connected to an 802.11g capable AP.
Figure 20. Signal Strength Section
Signal strength is reported as a percentage. A signal in the red area indicates a bad connec-
tion. A signal in the green area indicates a good connection.
The wireless mode indicator shows the data rates the SysKonnect Cardbus Adapter oper-
ates. There are two modes: 802.11b and 802.11g (backward compatible to 802.11b).
Internet Protocol (TCP/IP)
The internet protocol specifies the format of packets, also called datagrams, and the address-
ing scheme. Most networks combine IP with a higher-level protocol called TCP, which estab-
lishes a virtual connection between a destination and a source.
Figure 21. Internet Protocol Section
The parameters of the Internet protocol are:
•
“DHCP Option” – Dynamic Host Configuration Protocol.
The choices are Enableor Disable.
•
“IP Address” – an identifier for a computer or device on a TCP/IP network. The format of
an IP address is a 32-bit numeric address written as four numbers separated by periods.
Each number can be 0 to 255.
•
•
“Subnet Mask” – a mask used to determine the subnet an IP address belongs to.
“Default Gateway” – the default gateway is the gateway in a network that a computer will
use to acess another network if a no other gateway is specified for use. In enterprises,
the gateway is the computer that routes the traffic from a workstation to the outside.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
3 Marvell Configuration Utility
Actual Throughput Performance
This section of the NETWORK STATUS tab displays the Current Transmit (Tx) Rate and the Cur-
rent Receive (Rx) Rate of the channel being monitored.
Figure 22. Throughput Section
These are actual throughput diagrams (without the WLAN protocol overhead).
i
Radio On/Off Box
Clicking the Radio Off checkbox turns the radio off. Deactivating the checkbox turns the radio
on.
Figure 23. Radio OFF Checkbox
Another way to turn the radio on or off is to right-click the CONFIGURATION UTILITY icon in the
system tray and click TURN RADIO OFF to turn the radio off. When the radio is off, click TURN
RADIO ON to turn the radio back on.
You can also use the system hot key Alt+F2 to turn the radio on/off.
Figure 24. System Tray – Radio On/Off
When the radio is off, there is no radio activity, and the following tabs are disabled:
•
•
•
SITE SURVEY
STATISTICS
ADVANCED
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile Manager Tab
31
Profile Manager Tab
Clicking the PROFILE MANAGER tab displays the “Profile Manager” window. The Profile Manag-
er displays the profiles available and allows you to create, modify, and delete profiles.
Figure 25. Profile Manager Tab
Profile List Window
The window on the left side of this tab lists all available profiles. Highlighting a profile selects
it. If the Default checkbox is activated, that profile is used in auto-configuration mode when
the link is lost. If it is deactivated, that profile is excluded in auto-configuration.
The controls associated with this window are:
•
APPLY PROFILE – applies the profile selected. Apply the profile by double-clicking the
desired profile.
•
MOVE UP / MOVE DOWN – move the list up and down in the window. All profiles with the
“Network Type” set to INFRASTRUCTURE are displayed before the profiles with the “Net-
work Type” set to AD HOC.
•
•
•
DELETE – deletes a profile.
CREATE – creates a profile.
SAVE – saves changes made to a selected profile.
Profile Setting
The profile settings are used to display information about the profile selected in the Profile list
window. The information is divided into three tabs: NETWORK INFO, SECURITY, and PROTOCOL.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
3 Marvell Configuration Utility
Network Info Tab
The Profile Manager initially displays the NETWORK INFO tab.
Figure 26. Network Info Tab
The NETWORK INFO tab contains the following fields:
•
•
•
“Profile Name” – the profile selected.
“Network SSID” – the network SSID label.
“Network Type” – the type of environment to which you are connected. The choices are
INFRASTRUCTURE mode or AD HOC mode.
•
“Wireless Mode” – the wireless mode being used, either 802.11b (11 Mbit/s) or 802.11g
(54 Mbit/s).
Security Tab
This section describes the SECURITY tab configuration.
Security Standards
Implementing a security infrastructure to monitor physical access to WLAN networks is more
difficult than monitoring access on wired networks. Unlike wired networks where a physical
connection is required, anyone within range of a wireless access point can send and receive
frames, as well as listen for frames being sent.
IEEE 802.11 defines a set of standards and protocols for use in minimizing the security risks
on wireless networks.
Two of the security standards are as follows:
•
802.1x – 802.1x authentication provides authenticated access to 802.11 wireless net-
works and to wired Ethernet networks. 802.1x minimizes wireless network security risks
by providing user and computer identification, centralized authentication, and encryption
services based on the WEP algorithm. 802.1x supports the Extensible Authentication
Protocol (EAP). EAP allows the use of different authentication methods, such as smart
cards and certificates.
•
Wi-Fi Protected Access (WPA) – WPA is an implementation based on a subset of the
802.11i standard. WPA provides enhanced security for wireless networks when used with
the TKIP and the Message Integrity Check (MIC) algorithms.
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile Manager Tab
33
Authentication Modes
The Marvell Configuration Utility currently supports the following Authentication modes:
•
•
•
WPA-PSK
802.1x EAP/TLS
802.1x PEAP
Clicking the SECURITY tab displays the security options.
Figure 27. Security Tab – Authentication Mode
The SECURITY tab contains the following fields:
•
“Authentication Mode” – options are OPEN SYSTEM, SHARED KEY, Auto Switch, WPA
802.1X (EAP/TLS and PEAP), WPA-PSK, and WPA. To connect to an access point through
the radius server, the user can select either WPA 802.1X EAP/TLS or WPA 802.1X PEAP as
the Authentication mode.
Figure 28. Security Tab – WEP Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
34
3 Marvell Configuration Utility
•
•
“Encryption Method” – options are TKIP, WEP, or SECURITY OFF, depending on the
Authentication mode.
“WEP Key Setting” – if WEP encryption method is selected, the WEP keys can be config-
Configure WEP Keys
Clicking the CONFIGURE WEP KEYS button displays the window “Configure WEP Key”.
Figure 29. Configure WEP Key
•
•
“Key Format” – either ASCII CHARACTERS or HEXADECIMAL DIGITS.
“Key Size” – 40-BIT or 104-BIT:
•
•
40-BIT, 5 character ASCII key size (40-bit, 10 character hexadecimal)
104-BIT, 13 character ASCII key size (104-bit, 26 character hexadecimal)
•
“Transmit Keys” – there are four transmit keys. The key value is displayed in ASCII or
hexadecimal, depending on the format selected. Likewise, the key size shown depends
on the key size selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile Manager Tab
35
WPA-PSK Support in Infrastructure Mode
In Infrastructure mode, if WPA-PSK is selected as the Authentication mode, TKIP is automat-
ically selected as the encryption method.
Figure 30. Security Tab – TKIP Encryption
1. Enter the network passphrase in the “Passphrase” field.
2. For security reasons, re-enter the passphrase in the “Confirm” field.
WPA-PSK is not supported in Ad-hoc mode.
WPA (802.1x EAP/TLS) Support in Infrastructure Mode
In Infrastructure mode, the user can use two different authentication modes to connect to an
access point through the radius server: WPA 802.1x EAP/TLS or WPA 802.1x PEAP.
Figure 31. Security Tab – WPA (802.1x EAP/TLS)
Download from Www.Somanuals.com. All Manuals Search And Download.
36
3 Marvell Configuration Utility
To use WPA 802.1x EAP/TLS, proceed as follows:
1. In the field “Authentication Mode”, select 802.1X.
2. In the field “Encryption Method”, select TKIP or WEP.
3. From the pulldown menu under “802.1x Authentication Protocol” select EAP/TLS (USE
CERTIFICATE).
4. Click the CONFIGURE WPA RADIUS button to configure the security settings for WPA EAP/
TLS.
The window “WPA EAP/TLS Radius Configuration” is displayed.
Figure 32. WPA Radius Configuration
5. Click the BROWSE button.
The window “Select Certificate” is displayed.
Figure 33. Select Certificate
6. Select the desired certificate.
7. Click SELECT.
The window “WPA Radius Configuration” is displayed again and the name of the selected
certificate appears in the field “Certificate”.
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile Manager Tab
37
Figure 34. WPA Radius Configuration with Selected Certificate
8. Make sure that the “Login Name” is entered.
9. Click the OK button to exit the window.
WPA (802.1x PEAP) Support in Infrastructure Mode
In Infrastructure mode, the user can use two different authentication modes to connect to an
access point through the radius server: WPA 802.1x EAP/TLS or WPA 802.1x PEAP.
Figure 35. Security Tab – WPA (802.1x PEAP)
To use WPA 802.1x PEAP, proceed as follows:
1. In the field “Authentication Mode”, select 802.1X.
2. In the field “Encryption Method”, select TKIP or WEP.
3. From the pulldown menu under “802.1x Authentication Protocol” select PROTECTED EAP
(PEAP).
4. Click on the CONFIGURE WPA RADIUS button to configure security settings.
The window “WPA Radius Configuration” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
3 Marvell Configuration Utility
Figure 36. WPA Radius Configuration for WPA 802.1 PEAP
5. Enter all required information (Login Name, Password, Domain).
Protocol
On the PROTOCOL tab the user can set or change protocol information related to the network
connection.
Figure 37. Protocol Tab
The tab provides the following options:
•
Do not change settings – If this checkbox is activated, the protocol settings are not
changed when the profile is applied.
•
“Use below settings” – If the Do not change settings checkbox is deactivated, some of
the protocol settings below can be changed:
•
•
•
“Power Save Mode” – Sets the power mode. Available options are CONTINUOUS
ACCESS and MAX POWER SAVE. The default is CONTINUOUS ACCESS.
“Preamble (802.11b)” – Sets the radio preamble to AUTO or LONG. This option takes
effect only when attaching to an 802.11b network.
“Transmit Rate” – The range of the data rate depends on the type of access point
that the SysKonnect Cardbus Adapter is connected to. The default setting is AUTO.
Download from Www.Somanuals.com. All Manuals Search And Download.
Site Survey Tab
39
•
•
“Fragment Threshold” – Sets the fragmentation threshold (the size that packets are
fragmented into for transmission). The default setting is 2346.
“RTS/CTS Threshold” – Sets the packet size at which the access point issues a
Request-To-Send (or Clear-to-Send) frame before sending the packet. The default
setting is 2346.
•
RESET button – Clicking RESET returns the protocol settings to their default values.
Site Survey Tab
Clicking the SITE SURVEY tab displays the window “Site Survey”.
Figure 38. Site Survey Tab
This tab shows a list of all of the peer-to-peer and access point stations within range of the
adapter.
Networks Filter
In the field “Networks Filter” the user can decide which sites are displayed in the “Site Survey
List” window.
•
•
•
•
Display Peer-To-Peer stations – If this checkbox is activated, all peer-to-peer stations
within range are displayed.
Display 802.11a Access Points – If this checkbox is activated, all 802.11a access points
within range are displayed.
Display 802.11g Access Points – If this checkbox is activated, all 802.11g access points
within range are displayed.
Display 802.11b Access Points – If this checkbox is activated, all 802.11b access points
within range are displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
3 Marvell Configuration Utility
Site Survey List
This window reports information on the Ad-hoc or access point (AP) stations detected.
802.11b
AP Icon
Project2
802.11g
AP Icon
Circle means
connected
Ad-hoc
Network
Figure 39. Site Survey List
The list provides the following columns:
•
“Network SSID” – the network SSID label; i.e., the network name. The network name is a
text string.
•
“MAC Address” – the MAC address is a hardware address that uniquely identifies each
node of a network.
•
•
•
“Security” – security enabled or disabled.
“CH.” – displays the channel used by the detected device.
“Signal” – displays the signal strength of the detected device as a percentage.
Icons
In addition, the following icons may be displayed at the left in the column “Network SSID”:
•
•
•
•
An antenna icon with a subscript b indicates an 802.11b access point.
An antenna icon with a subscript g indicates an 802.11g access point.
A circle around the antenna icon means the adapter is connected to this network.
A slash icon indicates an Ad-hoc network.
Download from Www.Somanuals.com. All Manuals Search And Download.
Site Survey Tab
41
Filter Button
Clicking the FILTER button displays the window “Advanced Filter”.
Figure 40. Advanced Filter
The window provides the following options:
•
•
•
In the section “Network SSID”:
•
•
Any SSID – If this radio button is selected, any SSID is used.
Find network with this SSID – If this radio button is selected, the utility searches for
the specified SSID.
In the section “Network BSSID”:
•
•
Any BSSID – If this radio button is selected, any BSSID is used.
Find network with this BSSID – If this radio button is selected, the utility searches for
the specified BSSID.
In the section “Select Channel”:
One or several specific channels or all channels can be selected and then be checked.
Only the checked channels will be used in the site survey.
i
Refresh Button
Clicking the REFRESH button requests a survey of the wireless networks in the area.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
3 Marvell Configuration Utility
Statistics Tab
Clicking the STATISTICS tab displays the statistics of the current connect session.
Figure 41. Statistics Tab
Signal Strength
The color-coded Signal Strength bar displays the signal strength of the last packet received
by the adapter. Signal strength is reported as a percentage. A signal in the red area indicates
a bad connection. A signal in the green area indicates a good connection.
b means connected to an 802.11b capable AP.
g means connected to an 802.11g capable AP.
Figure 42. Signal Strength Section
Download from Www.Somanuals.com. All Manuals Search And Download.
Statistics Tab
43
Transmit Section
The “Transmit” section shows the information on the packets sent.
Figure 43. Transmit Section
•
•
“Total Packet” – reports the total number of packets transmitted.
“Unicast Packet” – reports the number of packets transmitted by the adapter that were
destined for a single network node.
•
•
“Multicast Packet” – reports the number of packets transmitted by the adapter that were
destined for more than one network node.
“Single Retries” – reports the number of packets that require one retry before the adapter
received an acknowledgement.
After the adapter sends a packet, it waits for an acknowledgement from the receiving
radio to confirm that the packet was successfully received. If the acknowledgement is not
received within a specified period of time, the adapter retransmits the packet.
•
•
“Multiple Retries” – reports the number of packets that require more than one retry before
the adapter received an acknowledgement.
“Failed Count” – reports the number of packets that were not successfully transmitted
because the adapter did not receive an acknowledgement within the specified period of
time.
•
•
•
“RTS Success” – reports the number of RTS attempts that were successful.
“RTS Failure” – reports the number of RTS attempts that were not successful.
“ACK Error” – reports the number of unicast transmit attempts for which no acknowledge-
ment was received.
Receive Section
The “Receive” section shows the information on the packets received.
Figure 44. Receive Section
•
•
“Total Packet” – reports the total number of packets received.
“Unicast Packet” – reports the number of packets received by the adapter that were des-
tined for a single network node.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
3 Marvell Configuration Utility
•
“Multicast Packet” – reports the number of packets received by the adapter that were
destined for more than one network node.
•
•
“Duplicate Frame” – reports the number of duplicate frames received.
“Received Beacons” – reports the number of beacons received after association is estab-
lished.
•
“Beacon Loss” – reports the number of missing beacons after association is established.
Advanced Tab
Clicking the ADVANCED tab displays the window “Advanced”. This tab displays the advanced
parameters available.
Figure 45. Advanced Tab
Marvell Wireless Card
This section shows the type of SysKonnect Cardbus Adapter installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Tab
45
Protocol
This section of the Advanced tab sets the “Protocol” options.
Figure 46. Advanced – Protocol Section
•
•
“Power Save Mode” – sets the power mode:
•
•
CONTINUOUS ACCESS
MAX POWER SAVE
“Preamble (802.11b)” – sets the radio preamble (takes effect only when attaching to
802.11b networks):
•
•
AUTO
LONG
•
•
“Transmit Antenna” – transmit antenna mode is set to ANTENNA 2
“Receive Antenna” – sets the receive antenna mode:
•
•
DIVERSITY ON
DIVERSITY OFF
•
•
•
“Transmit Rate” – the range of the data rate depends on the type of access point that the
SysKonnect Cardbus Adapter is connected to. The default setting is AUTO.
“Fragment Threshold” – sets the fragmentation threshold (i.e., the size that packets are
fragmented into for transmission). The default setting is 2346.
“RTS/CTS Threshold” – sets the packet size at which the access point issues an RTS (or
CTS) frame before sending the packet. The default setting is 2346.
The APPLY CHANGES button configures the options according to the changes entered, where-
as the DEFAULT button applies the default values.
Miscellaneous
This section provides further protocol options.
Figure 47. Advanced – Miscellaneous Section
•
Auto connect if link loss or no connection (Use checked profiles in <Profile Manager>) –
Disabling this checkbox disables the auto-configuration feature. Whenever there is a link
Download from Www.Somanuals.com. All Manuals Search And Download.
46
3 Marvell Configuration Utility
loss, auto-configuration tries to establish a connection according to the checked profiles
in the Profile Manager.
•
•
Enable Auto Link – This checkbox allows the user to enable/disable the Auto Link fea-
ture.
Boost Mode – This checkbox allows the user to enable the Boost Mode for performance
enhancement.
Admin Tab
Clicking the ADMIN tab displays the window “Admin”. This tab enables the import and export of
profiles.
Figure 48. Admin Tab
Import Profiles
To import a profile, proceed as follows:
1. Click the IMPORT PROFILES button.
2. Select the path and filename of the profile.
3. Click OPEN.
Export Profiles
To export a profile, proceed as follows:
1. Click the EXPORT PROFILES button.
2. Select the path and filename of the profile.
3. Click SAVE.
Download from Www.Somanuals.com. All Manuals Search And Download.
About Tab
47
About Tab
Clicking on the ABOUT tab displays the window “About”. This tab contains the following infor-
mation: the MAC address of the SysKonnect Cardbus Adapter and region code assigned, the
firmware version and NDIS driver version used on the system and the Marvell Configuration
Utility version.
Figure 49. About Tab
Download from Www.Somanuals.com. All Manuals Search And Download.
48
3 Marvell Configuration Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Odyssey Client
Features
The Odyssey Client is a multi-platform 802.1X access client, which provides state-of-the-art
security to protect the network. It is easily deployed across all desktop and handheld devices
for the lowest overhead and gives administrators a superior level of control over how users
can connect to the network.
The Odyssey Client:
•
•
corresponds to IEEE standard 802.1x
supports a wide variety of WLAN security (EAP) authentication types, including EAP-
TTLS, EAP-PEAP, EAP-TLS, Cisco’s EAP-FAST and LEAP, EAP-SIM, and EAP-MD5
•
•
provides Wi-Fi Protected Access™ (WPA™)
enables authentification with common Windows authentification data, faciliating adminis-
tration
•
forwards authentification requirements to other Radius servers enabling authentification
through non-Windows systems
Installation
The Odyssey Client can be installed along with the Marvell Configuration Utility. If so, the in-
stallation of the Odyssey Client Manager for Marvell starts automatically after the Marvell
Configuration Utility installation is complete. There is no need to reboot when Windows 2000
and XP systems are used.
To install the Odyssey Client along with the Marvell Configuration Utility, proceed as follows:
1. Activate both checkboxes in the “Setup” window.
Figure 50. Setup Screen for Marvell Client Configuration Manager
and Odyssey Client Manager
2. Click INSTALL.
The installation procedure starts automatically after the Marvell Configuration Utility
installation is complete. The “InstallShield Wizard” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
51
Figure 52. Odyssey Client – Customer Information
6. Enter a name in the field “User Name”.
7. Enter an organization in the field “Organization”.
You have got the possibility to either use a 30-day-trial version or a licensed version.
8. If using a licenced version, enter the licence number in the field “License Key”.
9. Click NEXT.
The menu “Setup Type“ is displayed.
10. Select Complete (default).
11. Click NEXT.
12. Click INSTALL.
When the installation is complete, the window “InstallShield Wizard Completed” is dis-
played.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
4 Odyssey Client
Figure 53. Odyssey Client – InstallShield Wizard Completed
13. Select Launch Odyssey Client Manager.
14. Click FINISH.
When the in stallation is finished, an icon symbolizing the Odyssey Client appears in the task
bar:
.
If you purchased the licensed version, see the documentation of the Odyssey Client Manager
to learn about its functionality.
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Features
The SysKonnect SK-54C1 Wireless LAN Cardbus Adapter is comprised of highly integrated
Marvell 802.11g/b chipsets. The chipsets consist of a radio frequency (RF) transceiver and an
integrated MAC/Baseband WLAN client System-on-Chip device. Marvell chipset solutions are
compliant with the IEEE 802.11g/b standard and support point-to-point and point-to-multipoint
access that seamlessly connect to wired Ethernet and PC network LANs.
Wireless Modes
The SysKonnect Cardbus Adapter operates similar to Ethernet adapters except that a radio
replaces the wires between communication devices. All existing applications that operate
over Ethernet will operate over a SysKonnect wireless network without any modification or
need for special wireless networking software.
The adapter supports the following network technologies:
•
•
Ad-hoc (peer-to-peer group) mode
(Access Point, AP) Infrastructure mode
Ad-hoc Mode
In Ad-hoc mode (also referred to as peer-to-peer mode), wireless clients send and receive in-
formation to and from other wireless clients without using an access point. In comparison to
Infrastructure mode, this type of WLAN connection only contains wireless clients. Ad-hoc
mode is useful for establishing a network where wireless infrastructure does not exist or
where services are not required. Two or more computers can establish an Ad-hoc network
when within range of one another. Each computer dynamically connects to one another with-
out additional configuration. Ad-hoc mode is used to network computers at home or in small
offices. It is also used to set up a temporary wireless network for meetings.
Infrastructure Mode
In Infrastructure mode, wireless devices communicate with other wireless devices or devices
on the LAN side wired network through access points. When communicating through wired
networks, Cardbus adapters send and receive information through access points (APs). The
access point receives the information and redirects it to clients, which then receive the infor-
mation.
Access points are typically strategically located within an area to provide optimal coverage for
wireless clients. A large WLAN uses multiple access points to provide coverage over a wide
area. Access points connect to a LAN through a wired Ethernet connection. Access points
send and receive information from the LAN through this wired connection. Most corporate
WLANs operate in Infrastructure mode because they require access to the wired LAN in order
to use services such as file servers or printers.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
5 Features
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Troubleshooting
Removing incomplete Installations
When inserting the SysKonnect SK-54C1 Wireless LAN Cardbus Adapter into the computer
and before running the SysKonnect installation software from the SysKonnect CD-ROM, Win-
dows will detect the new hardware and attempt to install a driver for it. To guarantee installa-
tion of the correct driver and the Marvell Configuration Utility software, insert the SysKonnect
CD-ROM and complete the installation of the Marvell Configuration Utility before installing the
adapter.
Adapter installed, Marvell Configuration Utility
not found
The Marvell installation package installs both the Marvell Configuration Utility and the Win-
dows driver. The Marvell Configuration Utility is accessed by double-clicking the MARVELL LIB-
ERTAS CLIENT CONFIGURATION MANAGER icon in the system tray. It is also accessed through
the PROGRAMS menu.
The Marvell Configuration Utility will only function properly if prior to the setup the adapter is
installed properly. When the adapter is inserted and then the Marvell Configuration Utility is
called without installing the Windows driver, the Marvell Configuration Utility will be installed
but some of the tabs will be disabled and the LINK INFORMATION status will indicate Card Un-
pluggedor Not Connected.
To install the Marvell Configuration Utility after the adapter has already been installed under
Windows:
1. Verify that no previous version of the Marvell Configuration Utility is present on your sys-
tem. Use ADD/REMOVE PROGRAMS in the Control Panel.
If any version of the Marvell Configuration Utility is listed, highlight it and click REMOVE.
2. In the Device Manager, with the adapter inserted, verify that the adapter is listed.
If the adapter is not listed in the Device Manager, do not continue with these steps.
Instead, reboot the computer and install the adapter driver and the Marvell Configuration
Utility according to the installation instructions provided in this manual.
If the adapter is listed, proceed with step 3 to install the Marvell Configuration Utility.
3. Insert the SysKonnect CD-ROM into your CD-ROM drive.
4. Click EXIT on the SysKonnect screen that appears (the adapter is already installed (do
not run the SysKonnect installation software)).
5. Double-click MY COMPUTER or select START > MY COMPUTER.
6. Right-click the CD-ROM drive containing the SysKonnect CD-ROM.
7. Click EXPLORE.
8. Make sure that the adapter is inserted.
9. Find the file PROSet.msi in the root of the SysKonnect CD-ROM.
10. Double-click it, and follow the prompts.
11. In the window “Setup Type”, select Typical.
12. Click NEXT.
13. Click INSTALL.
14. Once the installation is complete, double-click the MARVELL LIBERTAS CLIENT CONFIGURA-
TION MANAGER icon in the system tray.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
6 Troubleshooting
The Marvell Configuration Utility is also installed by running the SysKonnect installation soft-
ware from the SysKonnect CD-ROM after completing the installation of the adapter under
Windows.
Adapter does not appear in the Marvell Configu-
ration Utility
If the adapter is not listed when running the Marvell Configuration Utility, or no wireless signal
meter appears in the system tray, proceed as follows:
1. Uninstall and re-install the driver and the Marvell Configuration Utility software using the
following instructions:
•
•
•
•
Insert the SysKonnect CD-ROM.
Click INSTALL SOFTWARE on the screen that appears.
Click NEXT when prompted to remove the adapter.
When removal is successful, click OK.
2. From the Control Panel, click ADD/REMOVE PROGRAMS.
3. If the Marvell Configuration Utility is listed, highlight it and click REMOVE.
4. Reboot the computer.
5. Re-insert the SysKonnect CD-ROM.
6. Click INSTALL SOFTWARE on the screen that appears.
7. Follow the prompts to complete the installation.
See the default installation instructions for details.
Uninstalling earlier Versions of the Marvell Con-
figuration Utility
Previous versions of the Marvell Configuration Utility do not support the SysKonnect SK-54C1
Wireless LAN Cardbus Adapter. If there is a version of the Marvell Configuration Utility on
your system that was installed for some other SysKonnect product, uninstall that version be-
fore starting to install the SysKonnect Cardbus Adapter.
To uninstall the Marvell Configuration Utility, proceed as follows:
1. In the Control Panel, go to ADD/REMOVE PROGRAMS.
2. Remove any versions of the Marvell Configuration Utility listed.
3. Install the adapter driver and the Marvell Configuration Utility according to the installation
instructions provided.
Disabling Windows Configuration Feature
Use either the Marvell Configuration Utility or the Windows Configuration Utility (in
Windows XP: the Zero Configuration Utility) to configure the wireless settings, but not both. It
is recommended that the Windows Utility be disabled and that the Marvell Configuration Utility
is used to configure the wireless adapter. If the Windows feature is enabled and the Marvell
Configuration Utility is also loaded under Windows, the Windows Utility will override the Mar-
vell Configuration Utility. The main screen of the Marvell Configuration Utility will display the
current status and signal strength information, but the profiles and any other tab of the Marvell
Configuration Utility are disabled and cannot be activated.
For information on deactivating the Windows Configuration Utility, see the Microsoft Windows
documentation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Status from Windows Tray Icon inconsistent in Windows XP
57
Network Status from Windows Tray Icon incon-
sistent in Windows XP
In Windows XP, if the Zero Configuration Utility is enabled and the Marvell Configuration Utili-
ty is running, the network status displayed is inconsistent with the actual network status. For
example, if associated successfully to a network using the Marvell Configuration Utility, the
utility shows the network status as “Connected”. However, when clicking the Windows Wire-
less Network tray icon or the Network Connections icon, the network status will be reported
as “Wireless Connection Unavailable”.
If the Zero Configuration Utility is enabled, Windows cannot determine that the connection
has been established through the Marvell Configuration Utility. To avoid this inconsistency,
the Zero Configuration Utility should be disabled when using the Marvell Configuration Utility.
After the Zero Configuration Utility has been disabled, the network status displayed will again
be consistent with the actual status.
As long as the Marvell Configuration Utility is running, all association requests from the Zero
Configuration Utility are blocked to avoid conflicts. To use the Zero Configuration Utility in-
stead of the Marvell Configuration Utility, terminate the Marvell Configuration Utility.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
6 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Important Information
Technical Support
If you encounter any problems, read the relevant sections of the manual. If you cannot solve
your problems, consult our technical support.
If you contact our technical support engineers, have the following information ready:
•
•
•
•
•
adapter type
driver version
operating system
configuration of your computer
type of cabling
Our support team can be reached as follows:
North / South America, Pacific Rim
Office hours 24 hours support via paging service
Europe
Mon-Thu 8:00 AM - 5:00 PM
Fri 8:00 AM - 03:30 PM (CET)
Phone
+1 866 782 2507 (toll free in the USA) +49 7243 502 330
+1 408 222 0666
+49 1805 759 526
+1 408 787 5395 (pager)
Fax
+1 408 752 9029
+49 7243 502 364
WWW
E-mail
Address
SysKonnect, Inc.
SysKonnect GmbH
®
®
A Marvell Company
A Marvell Company
700 First Avenue
Sunnyvale, CA 94089
USA
Siemensstraße 23
D-76275 Ettlingen
Germany
Calls received outside office hours in Europe are serviced by an answering machine and will
be dealt with as soon as possible.
Returning a Wireless LAN Cardbus Adapter for
Repair
If you want to return a faulty product to SysKonnect, follow these steps:
1. Contact us by phone, fax, or e-mail.
North / South America, Pacific Rim
European and other countries
Phone
+1 866 782 2507 (toll free)
+49 7243 502 476
+49 1805 759 526
+1 408 222 0666 (toll number)
Fax
+1 408 752 9029
+49 7243 502 364
E-mail
We will send you an RMA (Return Material Authorization) form by fax or e-mail.
2. Complete the form.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
7 Important Information
3. Return the form to us.
We will send you a unique reference number and inform you if the product is still under
warranty.
4. Send us the faulty product packed in an antistatic bag, with a copy of the completed form
enclosed in its original packaging (or comparable packaging).
5. Write the reference number issued by SysKonnect clearly visible on the outer packaging.
SysKonnect cannot accept any returned product without an RMA number on the outer pack-
aging. The warranty does not apply to products that have been damaged by electrostatic dis-
charge or inadequate packaging.
i
Additional Documentation and Updates
On the installation CD-ROM additional information is available, i.e. about other SysKonnect
products or other language versions of this manual.
To view a document on the CD-ROM, proceed as follows:
1. Insert the installation CD-ROM into your CD-ROM drive.
2. On the start page of the CD-ROM, click MANUAL.
A list with the available manuals is displayed.
3. Click the appropriate document.
The PDF file is displayed.
SysKonnect maintains a site on the World Wide Web where you can find the latest informa-
tion on our product range and our customer support services. The latest software is also pro-
vided on the SysKonnect web site.
To download the latest software or firmware from our web site, proceed as follows:
2. Click the button TECHNICAL SUPPORT.
3. Click the button DRIVER LIBRARY.
The latest software, sorted by product groups, can be found here.
4. Click the appropriate network technology, e.g. WIRELESS LAN.
5. Select the product family.
The available software for this adapter is displayed.
6. Click the appropriate software.
Click the diskette symbol to download the software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
61
Technical Specifications
Model
SysKonnect SK-54C1 Wireless LAN Cardbus Adapter
Dimensions (WxDxH)
Power consumption
External power adapter
LEDs
95 x 63 x 23 mm
@ max. 5.5 W
5V DC
2
Temperature range
Operation: 0°C to + 40°C
Storage: -10°C to + 70°C
Shipping: -40°C to + 70°C
Relative humidity
Operation: 10% to 80% non-condensing
Storage:
5% to 90% non-condensing
5% to 100% non-condensing
Shipping:
Safety and CE standards
Warranty
CE class B; compliant to 99/5//EEC directive and EMC
standards EN300328-2, EN301489-1/-17, EN60950
FCC class A
2 years
Download from Www.Somanuals.com. All Manuals Search And Download.
62
7 Important Information
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Acronyms and Abbreviations
The following table shows a list of acronyms and abbreviations used throughout this docu-
ment.
Term
Definition
802.11
802.11b
A family of specifications developed by the IEEE for wireless LAN technology.
An extension to 802.11 for WLANS and provides 11 Mbps transmission in the
2.4 GHz band.
802.11g
An extension to 802.11 for WLANS and provides 11 Mbps transmission in the
2.4 GHz band.
ACK
Acknowledgement
Ad-hoc
A group of computers each with wireless adapters, connected as an indepen-
dent WLAN.
AP
Access Point. A communication hub for wireless device users to connect to a
wired LAN.
BSS
Basic Service Set
BSSID
CardBus
Basic Service Set Identifier
The 32-bit version of the PCMCIA PC Card standard. In addition to support-
ing a wider bus (32 bits instead of 16 bits), CardBus also supports bus mas-
tering and operation speeds up to 33 MHz.
CTS
Clear-to-Send
DHCP
EAP
FCC
IEEE
LAN
MAC
MIC
Dynamic Host Configuration Protocol
Extensible Authentication Protocol
Federal Communications Commission
Institute of Electrical and Electronics Engineers
Local Area Network
Media Access Controller
Message Integrity Check
Personal Computer Memory Card International Association
Protected EAP
PCMCIA
PEAP
PSK
RF
Pre-shared Keys
Radio Frequency
ROM
RTS
Read Only Memory
Request-to-Send
Rx
Receive
SoC
SSID
System-on-Chip
Service Set ID. A 32-character unique identifier attached to the header of
packets sent over a WLAN that acts as a password when a mobile device
tries to connect to the BSS.
TCP/IP
TKIP
Transmission Control Protocol/Internet Protocol
Temporal Key Integrity Protocol
Download from Www.Somanuals.com. All Manuals Search And Download.
64
8 Acronyms and Abbreviations
Term
TLS
Tx
Definition
Transport Layer Security
Transmit
WEP
Wired Equivalent Privacy. A security protocol for WLANs defined in the
802.11b standard.
WLAN
WPA
Wireless Local Area Network
Security standard proposed by the Wi-Fi Alliance that uses additional algo-
rithms to further enhance wireless connectivity.
WPA-PSK Wi-Fi Protected Access-Preshared Key
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. License and Warranty
Information
The Americas, Asia, Australia, New Zealand,
Pacific
Dear Customer,
if you acquired your SysKonnect product in the UNITED STATES, CANADA or any other country in the AMERICAS, ASIA, AUSTRA-
LIA, NEW ZEALAND, PACIFIC, the following license and purchase agreement applies to you.
This is a legal agreement between you, the end user and SysKonnect Incorporation, a California U.S.A. Incorporation (SysKonnect
Inc.).
SysKonnect Inc. License and Purchase Agreement
By opening the sealed disk package and taking possession of the hardware, you are agreeing to be bound by the terms of this Agree-
ment. If you do not agree to the terms of this Agreement, promptly return the unopened and unused disk package and hardware with
the accompanying items (including all written materials and other accessories) to the place of purchase for a full refund.
Grant of Software License
This SysKonnect Inc. License Agreement (License) permits you to use one copy of the SysKonnect Inc. software product acquired
with this License (“SOFTWARE”) on any single computer, provided the SOFTWARE is in use on only one computer at any time. If you
have multiple Licenses for the SOFTWARE, then at any time, you may have as many copies of the SOFTWARE in use as you have
Licenses. The SOFTWARE is “in use” on a computer when it is loaded into the temporary memory (i.e. RAM) or installed into the per-
manent memory (e.g. hard disk or other storage device) of that computer, except that a copy installed on a network server for the sole
purpose of distribution to other computers is not “in use”. If the anticipated number of users of the SOFTWARE will exceed the number
of applicable Licenses, then you must have a reasonable mechanism or process in place to assure that the number of persons using
the SOFTWARE concurrently does not exceed the number of Licenses. If the SOFTWARE is permanently installed on the hard disk or
other storage device of a computer (other than a network server) and one person uses that computer more than 80% of the time it is
in use, then that person may also use the SOFTWARE on a portable or home computer.
Copyright
The SOFTWARE is owned by SysKonnect Inc. or its suppliers and is protected against copying by copyright laws, international treaty
provisions and other national laws.
If the SOFTWARE is not copy protected you may either make one copy of the SOFTWARE solely for backup or archival purposes, or
transfer the SOFTWARE to a single hard disk provided you keep the original solely for backup or archival purposes.
You may not copy the Product Manual(s) or written materials accompanying the SOFTWARE or HARDWARE.
Other Restrictions
You may not rent or lease the SOFTWARE or HARDWARE, but you may transfer your rights under this SysKonnect Inc. License and
Purchase Agreement on a permanent basis provided you transfer all copies of the SOFTWARE and all written materials, and the
recipient agrees to the terms of this Agreement. You may not reverse engineer, decompile or disassemble the SOFTWARE. Any
transfer must include the most recent update and all prior versions.
Hardware
SysKonnect Inc. warrants, that the hardware will be delivered free from defect and in working condition. SysKonnect Inc. does not
assume liability for nor warrant damage to the hardware after delivery. SysKonnect also does not warrant total applicability for specific
applications or customer Network environments.
Limited Warranty for Hardware and Software
Limited Warranty
SysKonnect Inc. warrants that the SOFTWARE will perform substantially in accordance with the accompanying Product Manual(s) for
a period of 90 days from the date of receipt.
SysKonnect warrants
that NETWORK INTERFACE CARDS and NETWORK INFRASTRUCTURE COMPONENTS (e.g., hubs, switches, concentrators) will
be free from defects in materials and workmanship under normal use and service for a period of 2 years from the date of receipt, and
other HARDWARE for a period of 6 months from the date of receipt respectively.
This warranty is given by SysKonnect Inc. as producer of the PRODUCT; possible legal warranty or liability claims against the dealer,
whom you have acquired your SOFTWARE or HARDWARE product from, shall neither replaced by nor limited through this warranty.
Customer Remedies
SysKonnect's entire liability and your exclusive remedy shall be, at SysKonnect's option, either return of the price paid, or repair or
replacement of the SOFTWARE or HARDWARE that does not meet SysKonnect's Limited Warranty and which is returned to SysKon-
nect Inc. with a copy of your receipt. This Limited Warranty is void if failure of the SOFTWARE or HARDWARE has resulted from acci-
dent, abuse, or misapplication. Any replacement SOFTWARE will be warranted by SysKonnect Inc. only for the remainder of the
original warranty period or 30 days, whichever is longer. Any replacement HARDWARE will be warranted for the remainder of the orig-
inal warranty period or 6 months, whichever is longer.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Appendix A. License and Warranty Information
No other Warranties
SysKonnect Inc. disclaims all other warranties or liabilities with respect to the SOFTWARE, the HARDWARE, the accompanying Prod-
uct Manual(s) and other written materials and any other accessories.
No Liability for Consequential Damages
SysKonnect Inc. does not warrant the software and hardware for a specific application, nor does SysKonnect Inc. accept any conse-
quential damages due to the use of the hardware or software. SysKonnect Inc. and its suppliers shall not be liable for any other dam-
ages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information
or data, property loss or other financial loss), arising out of the use of or the inability to use this SysKonnect Inc. product, even if
SysKonnect Inc. has been advised of the possibility of such damages. In any case, SysKonnect's entire liability shall be limited to the
amount actually paid by you for the product.
Other
This agreement is governed by the procedural and substantive laws of the State California, U.S.A. UN Trade Laws shall not be appli-
cable in any case.
Should individual stipulations of this Agreement be or become invalid, this invalid stipulation shall be replaced by a stipulation, which
is as close as possible to the invalid stipulation.
Should you have any questions concerning this Agreement, or if you desire to contact SysKonnect Inc. for any reason, please use the
address information enclosed in this product or write to: SysKonnect Inc., A Marvell®Company, 700 First Avenue, Sunnyvale, CA
94089.
U.S. Government Use
Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in FAR § 52.227-14 (June 1987)
Alternate III(g)(3) (June 1987), FAR § 52.227-19 (June 1987), or DFARS § 52.227-7013 (c)(1)(!!) (June 1988), as applicable. Contrac-
tor / Manufacturer is SysKonnect, Inc., A Marvell®Company, 700 First Avenue, Sunnyvale, CA 94089.
Europe
Dear Customer,
if you acquired your SysKonnect product in EUROPE, the following license and purchase agreement applies to you: This is a legal
agreement between you, the end user and SysKonnect GmbH, incorporated in Ettlingen/Federal Republic of Germany.
SysKonnect License and Purchase Agreement
By opening the sealed disk package and taking possession of the hardware, you are agreeing to be bound by the terms of this Agree-
ment. If you do not agree to the terms of this Agreement, promptly return the unopened and unused disk package and hardware with
the accompanying items (including all written materials and other accessories) to the place of purchase for a full refund.
Grant of Software License
This SysKonnect License Agreement (License) permits you to use one copy of the SysKonnect software product acquired with this
License (“SOFTWARE”) on any single computer, provided the SOFTWARE is in use on only one computer at any time. If you have
multiple Licenses for the SOFTWARE, then at any time, you may have as many copies of the SOFTWARE in use as you have
Licenses. The SOFTWARE is “in use” on a computer when it is loaded into the temporary memory (i.e. RAM) or installed into the per-
manent memory (e.g. hard disk or other storage device) of that computer, except that a copy installed on a network server for the sole
purpose of distribution to other computers is not “in use”. If the anticipated number of users of the SOFTWARE will exceed the number
of applicable Licenses, then you must have a reasonable mechanism or process in place to assure that the number of persons using
the SOFTWARE concurrently does not exceed the number of Licenses. If the SOFTWARE is permanently installed on the hard disk or
other storage device of a computer (other than a network server) and one person uses that computer more than 80% of the time it is
in use, then that person may also use the SOFTWARE on a portable or home computer.
Copyright
The SOFTWARE is owned by SysKonnect or its suppliers and is protected against copying by copyright laws, international treaty pro-
visions and other national laws.
If the SOFTWARE is not copy protected you may either make one copy of the SOFTWARE solely for backup or archival purposes, or
transfer the SOFTWARE to a single hard disk provided you keep the original solely for backup or archival purposes.
You may not copy the Product Manual(s) or written materials accompanying the SOFTWARE or HARDWARE.
Other Restrictions
You may not rent or lease the SOFTWARE or HARDWARE, but you may transfer your rights under this SysKonnect License and Pur-
chase Agreement on a permanent basis provided you transfer all copies of the SOFTWARE and all written materials, and the recipient
agrees to the terms of this Agreement. You may not reverse engineer, decompile or disassemble the SOFTWARE. Any transfer must
include the most recent update and all prior versions.
Hardware
The risk passes to you, the end user, upon taking possession (hand over) of the HARDWARE. Total qualities were not warranted.
Download from Www.Somanuals.com. All Manuals Search And Download.
Deutschland, Schweiz, Österreich, Liechtenstein
67
Limited Warranty for Hardware and Software
Limited Warranty
SysKonnect warrants that the SOFTWARE will perform substantially in accordance with the accompanying Product Manual(s) for a
period of 90 days from the date of receipt if you have created the required technical preconditions.
SysKonnect warrants that NETWORK INTERFACE CARDS and NETWORK INFRASTRUCTURE COMPONENTS (e.g., hubs,
switches, concentrators) will be free from defects in materials and workmanship under normal use and service for a period of 2 years
from the date of receipt, and other HARDWARE for a period of 6 months from the date of receipt respectively.
Any implied warranties on the SOFTWARE are limited to 90 days, to 2 years on the NETWORK INTERFACE CARDS and on the
NETWORK INFRASTRUCTURE COMPONENTS and to 6 months on all other hardware. This warranty is given by SysKonnect as
producer of the PRODUCT; possible legal warranty or liability claims against the dealer, whom you have acquired your SOFTWARE or
HARDWARE product from, shall neither replaced by nor limited through this warranty.
Customer Remedies
SysKonnect's entire liability and your exclusive remedy shall be, at SysKonnect's option, either
return of the price paid, or repair or replacement of the SOFTWARE or HARDWARE that does not meet SysKonnect's Limited War-
ranty and which is returned to SysKonnect with a copy of your receipt. This Limited Warranty is void if failure of the SOFTWARE or
HARDWARE has resulted from accident, abuse, or misapplication. Any replacement SOFTWARE will be warranted by SysKonnect
only for the remainder of the original warranty period or 30 days, whichever is longer. Any replacement HARDWARE will be warranted
for the remainder of the original warranty period or 6 months, whichever is longer.
No other Warranties
SysKonnect disclaims all other warranties or liabilities with respect to the SOFTWARE, the HARDWARE, the accompanying Product
Manual(s) and other written materials and any other accessories.
No Liability for Consequential Damages
SysKonnect does not warrant the software and Hardware for a specific application, nor does SysKonnect accept any consequential
damages due to the use of the hardware or software. SysKonnect and its suppliers shall not be liable for any other damages whatso-
ever (including, without limitation, damages for loss of business profits, business interruption, loss of business information or data,
property loss or other pecuniary loss), arising out of the use of or the inability to use this SysKonnect product, even if SysKonnect has
been advised of the possibility of such damages. In any case, SysKonnect's entire liability shall be limited to the amount actually paid
by you for the product.
Other
This agreement is governed by the procedural and substantive laws of the Federal Republic of Germany. UN Trade Laws shall not be
applicable in any case. Place of litigation is Karlsruhe, FRG, as far as this can be agreed upon operatively in this way.
Should individual stipulations of this Agreement be or become invalid, this invalid stipulation shall be replaced by a stipulation, which
is as close as possible to the invalid stipulation.
Should you have any questions concerning this Agreement, or if you desire to contact SysKonnect for any reason, please use the
address information enclosed in this product or write to: SysKonnect GmbH, Siemensstrasse 23, D-76275 Ettlingen.
Deutschland, Schweiz, Österreich, Liechten-
stein
Verehrte Kundin, verehrter Kunde
wenn Sie Ihr SysKonnect Produkt in DEUTSCHLAND, in der SCHWEIZ, in ÖSTERREICH oder in LIECHTENSTEIN erworben haben,
gilt für Sie der folgende Lizenz- und Kaufvertrag. Dies ist ein rechtsgültiger Vertrag zwischen Ihnen, dem Endanwender, und der
SysKonnect GmbH mit Sitz in Ettlingen/Bundesrepublik Deutschland.
SysKonnect Lizenz- und Kaufvertrag
Durch Öffnen der versiegelten Diskettenpackung und durch die Inbesitznahme der Hardware erklären Sie sich an die Bestimmungen
der nachfolgenden Vereinbarung gebunden. Wenn Sie mit den Bestimmungen dieses Vertrages nicht einverstanden sind, geben Sie
bitte die Diskettenpackung und die Hardware ungeöffnet und unbenutzt mit den Begleitgegenständen (einschließlich aller schriftlichen
Unterlagen und dem sonstigen Zubehör) unverzüglich gegen volle Rückerstattung des Preises an die Stelle zurück, von der Sie sie
bezogen haben.
Einräumung einer Software-Lizenz
Diese SysKonnect Lizenzvereinbarung (Lizenz) gibt Ihnen die Berechtigung, eine Kopie des SysKonnect Software Produktes, das mit
dieser Lizenz (Software) erworben wurde, auf einem Einzelcomputer unter der Voraussetzung benutzen, dass die Software zu jeder
beliebigen Zeit auf nur einem einzigen Computer verwendet wird. Wenn Sie Mehrfachlizenzen für die Software erworben haben, dür-
fen Sie immer nur höchstens so viele Kopien in Benutzung haben, wie Sie Lizenzen besitzen. Die Software ist auf einem Computer “in
Benutzung”, wenn Sie in den Zwischenspeicher (d.h., RAM) geladen oder in einem Permanentspeicher (z.B. einer Festplatte oder
einer anderen Speichervorrichtung) dieses Computers gespeichert ist, mit der Ausnahme, dass eine Kopie, die auf einem Netzserver
zu dem alleinigen Zweck der Verteilung an andere Computer installiert ist, nicht “in Benutzung” ist. Wenn die voraussichtliche Zahl der
Benutzer der Software die Zahl der erworbenen Lizenzen übersteigt, müssen Sie angemessene Mechanismen oder Verfahren bereit-
halten, um sicherzustellen, dass die Zahl der Personen, die die Software gleichzeitig benutzen, nicht die Zahl der Lizenzen übersteigt.
Wenn die Software permanent auf einer Festplatte oder einer anderen Speichervorrichtung eines Computers, der kein Netzserver ist,
installiert wird und eine einzige Person diesen Computer zu mehr als 80 % der Zeit benutzt, die er in Benutzung ist, darf diese eine
Person die Software auch auf einem tragbaren Computer oder einem Heimcomputer benutzen.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Appendix A. License and Warranty Information
Urheberrecht
Die Software ist Eigentum von SysKonnect oder deren Lieferanten und ist durch Urheberrechtsgesetze, internationale Verträge und
andere nationale Rechtsvorschriften gegen Kopieren geschützt.
Wenn die Software nicht mit einem technischen Schutz gegen Kopieren ausgestattet ist, dürfen Sie entweder eine einzige Kopie der
Software ausschließlich für Sicherungs- oder Archivierungszwecken machen die Software auf eine einzige Festplatte übertragen,
sofern Sie das Original ausschließlich zu Sicherungs- und Archivierungszwecken aufbewahren.
Sie dürfen weder die Handbücher des Produktes noch anderes schriftliches Begleitmaterial zur Software oder Hardware kopieren.
Weitere Beschränkungen
Sie dürfen die Software oder Hardware weder vermieten noch verleihen, aber Sie dürfen die Rechte aus diesem SysKonnect Lizenz-
und Kaufvertrag auf Dauer auf einen anderen übertragen, vorausgesetzt, dass Sie alle Kopien der Software und das gesamte schrift-
liche Begleitmaterial übertragen und der Empfänger sich mit den Bestimmungen dieses Vertrages einverstanden erklärt. Zurückent-
wickeln (Reverse Engineering), Dekompilieren und Entassemblieren der Software sind nicht gestattet. Eine Übertragung muß die
letzte aktuelle Version (Update) und alle früheren Versionen umfassen.
Hardware
Mit der Inbesitznahme (Übergabe) dieser Hardware geht die Gefahr auf Sie, den Endanwender über. Eigenschaften wurden nicht
zugesichert.
Beschränkte Garantie für Hardware und Software
SysKonnect garantiert für einen Zeitraum von 90 Tagen ab Empfangsdatum, dass die Software, soweit die technischen Voraussetzun-
gen hierfür von Ihnen geschaffen wurden, im wesentlichen gemäß der begleitenden Dokumentation arbeitet. SysKonnect garantiert
für Netzwerkadapterkarten und Infrastrukturkomponenten (z.B. Konzentratoren, Hubs, Switches) für einen Zeitraum von 2 Jahren und
die sonstige Hardware für einen Zeitraum von 6 Monaten ab Empfangsdatum, dass die gelieferte Hardware bei normaler Benutzung
und Wartung frei von Material- oder Verarbeitungsfehlern ist. Die Garantie ist bezüglich der Software auf 90 Tage, bezüglich der Netz-
werkadapter und Infrastrukturkomponenten auf 2 Jahre und bezüglich der sonstigen Hardware auf 6 Monate beschränkt. Diese
Garantie wird von SysKonnect als Hersteller des Produktes übernommen; etwaige gesetzliche Gewährleistungs- oder Haftungsan-
sprüche gegen den Händler, von dem Sie Ihr Exemplar der Software oder Hardware bezogen haben, werden hierdurch weder ersetzt
noch beschränkt.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Compliance Statements
This section contains regulatory notices applicable to the SysKonnect Cardbus Adapter.
FCC Compliance Information Statement –
Class A
NOTE: This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Changes or modifications not expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Appendix B. Compliance Statements
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Besuchen Sie uns unter:
SysKonnect GmbH
Siemensstrasse 23
D-76275 Ettlingen
Support: 01805 759526 (12 Cent/Minute)
01805 SKWLAN (12 Cent/Minute)
E-mail: sales@syskonnect.de
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Servis Rhino Compact Loader 1598 User Manual
Sharp Cash Register ER A320 User Manual
SIIG Computer Hardware 16550 User Manual
Singer Sewing Machine 96 18 User Manual
Sony Microcassette Recorder ICD SX20 User Manual
Sony Microphone ECM 330 User Manual
Sony Microphone ECM S80 User Manual
Sony Personal Computer PCV 7776 User Manual
Sony Portable Speaker SRS X11 BLK User Manual
Speed Queen Washer Dryer CL8761 User Manual