Sylvania DVD VCR Combo DVC845E User Manual

Owner’s Manual  
Please read before using this equipment.  
DVD/CD Player with Video Cassette Recorder  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.  
DVC845E  
Table of Contents  
Precautions  
Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Avoid the Hazards of Electrical Shock and Fire. . . . . . . . . . . . . . 4  
Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . 4  
About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Symbol Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Setup  
About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5  
Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Hint for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6  
Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8  
VCR/DVD Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Preset for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Turn on the unit for the first time . . . . . . . . . . . . . . . . . . . . . . . . 10  
Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Supplied Accessory  
• Remote control  
(NB100UD or NB150UD)  
with two AA batteries  
• RF cable  
(WPZ0901TM002)  
VCR Functions  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Recording & OTR (One Touch Recording) . . . . . . . . . . . . . . . 11  
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
On-Screen Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Hint for Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
MTS System (Multi-Channel Television Sound) . . . . . . . . . . . 13  
Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Time Search / Index Search / Auto Repeat . . . . . . . . . . . . . . . . 14  
• Audio/Video cables  
(WPZ0102TM015 or  
WPZ0102LTE01)  
• Owner’s Manual  
(0VMN04016)  
Owner's Manual  
DVD Functions  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
The On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Track Search / Title/Chapter Search / Time Search . . . . . . . . . 17  
Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Repeat / Random / Programmed Playback . . . . . . . . . . . . . . 18  
Repeat Playback / Repeat A-B Playback /  
Random Playback / Programmed Playback. . . . . . . . . . . . . . . . 18  
Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Subtitle Language / Audio Language / Camera Angle /  
Black Level Setting / Stereo Sound mode / Virtual Surround . . . . . . . 19  
DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
PARENTAL Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
To return the All Selections of SET UP (except for PARENTAL) to the Default Setting 22  
If you need additional operating assistance after  
reading this owner’s manual or to order replace-  
ment accessories, please call  
Information  
TOLL FREE : 1-800-968-3429  
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Basic TV Connection  
(Back of  
Cable  
Signal  
Antenna  
or  
Cable  
Signal  
Antenna  
or  
DVD/VCR)  
(Back of TV)  
AC  
outlets  
(Back of TV)  
4
ANT-IN  
Plug in  
2
ANT-OUT  
Disconnect  
3
From  
Connect  
DVD/VCR  
Connect  
From  
TV  
RF Cable (supplied)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please refer to "Connections" on page 5.  
5
Important Safeguards  
1. Read Instructions - All the safety and operating instruc-  
tions should be read before the appliance is operated.  
proper grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge unit,  
size of grounding conductors, location of antenna-dis-  
charge unit, connection to grounding electrodes, and  
requirements for the grounding electrode. (Fig. A)  
2. Retain Instructions- The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings - All warnings on the appliance and in the  
operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions  
should be followed.  
FIGURE A  
ANTENNA  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
LEAD  
WIRE  
5. Cleaning - Unplug this video product from the wall outlet  
before cleaning. Do not use liquid cleaners or aerosol  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
cleaners. Use  
a
damp cloth for cleaning.  
EXCEPTION: A product that is meant for uninterrupted  
service and, that for some specific reason, such as the  
possibility of the loss of an authorization code for a CATV  
converter, is not intended to be unplugged by the user for  
cleaning or any other purpose, may exclude the reference  
to unplugging the appliance in the cleaning description  
otherwise required in item 5.  
6. Attachments - Do not use attachments not recommended  
by the video product manufacturer as they may cause haz-  
ards.  
7. Water and Moisture- Do not use this video product near  
water, for example, near a bath tub, wash bowl, kitchen  
sink, or laundry tub, in a wet basement, or near a swim-  
ming pool, and the like.  
8. Accessories - Do not place this video product on an unsta-  
ble cart, stand, tripod, bracket, or table. The video product  
may fall, causing serious injury to a child or adult, and seri-  
ous damage to the appliance. Use only with a cart, stand,  
tripod, bracket, or table recommended by the manufactur-  
er, or sold with the video product. Any mounting of the  
appliance should follow the manufactur-  
er's instructions and should use a  
mounting accessory recommended by  
the manufacturer. An appliance and cart  
combination should be moved with care.  
Quick stops, excessive force, and  
uneven surfaces may cause the appli-  
ance and cart combination to overturn.  
9. Ventilation - Slots and openings in the cabinet are provid-  
ed for ventilation and to ensure reliable operation of the  
video product and to protect it from overheating, and these  
openings must not be blocked or covered. The openings  
should never be blocked by placing the video product on a  
bed, sofa, rug, or other similar surface. This video product  
should not be placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is provided or  
the manufacturer's instructions have been adhered to.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC – NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
14. Lightning - For added protection for this video product dur-  
ing a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall out-  
let and disconnect the antenna or cable system. This will  
prevent damage to the video product due to lightning and  
power-line surges.  
15. Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such  
power lines or circuits. When installing an outside antenna  
system, extreme care should be taken to keep from touch-  
ing such power lines or circuits as contact with them might  
be fatal.  
16. Overloading - Do not overload wall outlets and extension  
cords as this can result in a risk of fire or electric shock.  
17. Object and Liquid Entry - Never push objects of any kind  
into this video product through any openings as they may  
touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid of  
any kind on the video product.  
18. Servicing - Do not attempt to service this video product  
yourself as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all servicing  
to qualified service personnel.  
19. Damage Requiring Service - Unplug this video product  
from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
video product.  
10. Power Sources - This video product should be operated  
only from the type of power source indicated on the mark-  
ing label. If you are not sure of the type of power supply to  
your home, consult your appliance dealer or local power  
company. For products intended to operate from battery  
power, or other sources, refer to the operating instructions.  
11. Grounding or Polarization - This video product is equipped  
with a polarized alternating-current line plug (a plug having  
one blade wider than the other). This plug will fit into the  
power outlet only one way. This is a safety feature. If you  
are unable to insert the plug fully into the outlet, try revers-  
ing the plug. If the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do not defeat  
the safety purpose of the polarized plug.  
12. Power Cord Protection - Power supply cords should be  
routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying par-  
ticular attention to cords at plugs, convenience recepta-  
cles, and the point where they exit from the appliance.  
13. Outdoor Antenna Grounding - If an outside antenna or  
cable system is connected to the video product, be sure  
the antenna or cable system is grounded so as to provide  
some protection against voltage surges and built-up static  
charges. Article 810 of the National Electrical Code,  
ANSI/NFPA No. 70, provides information with regard to  
c. If the video product has been exposed to rain or water.  
d. If the video product does not operate normally by following  
the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the video product to its normal operation.  
e. If the video product has been dropped or damaged in any  
way.  
f. When the video product exhibits a distinct change in per-  
formance this indicates a need for service.  
20. Replacement Parts - When replacement parts are  
required, be sure the service technician has used replace-  
ment parts specified by the manufacturer or have the  
same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other haz-  
ards.  
21. Safety Check - Upon completion of any service or repairs  
to this video product, ask the service technician to perform  
safety checks to determine that the video product is in  
proper operating condition.  
22. Heat - This video product should be situated away from  
heat sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce heat.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Installation Location  
Maintenance  
For safety and optimum performance of this unit:  
• Install the unit in a horizontal and stable position. Do ¡Please refer to relevant topics on the Troubleshooting  
SERVICING  
not place anything directly on top of the unit. Do not  
place the unit directly on top of the TV.  
Guide on page 23 before return the product.  
¡When this unit become inoperative, do not try to cor-  
rect the problem by yourself. There are no user-ser-  
viceable parts inside.Turn off, unplug the power plug,  
and please call our help line mentioned on the front  
page to locate an Authorized Service Center.  
• Shield it from direct sunlight and keep it away from  
sources of intense heat. Avoid dusty or humid  
places. Avoid places with insufficient ventilation for  
proper heat dissipation. Do not block the ventilation  
holes on the sides of the unit. Avoid locations sub-  
ject to strong vibration or strong magnetic fields.  
CLEANING THE CABINET  
¡Use a soft cloth slightly moistened with a mild deter-  
gent solution. Do not use a solution containing alco-  
hol, spirits, ammonia or abrasive.  
Avoid the Hazards of Electrical Shock and Fire  
CLEANING DISCS  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it  
from AC wall outlet. Grasp it by the plug.  
• If, by accident, water is spilled on this unit, unplug  
the power cord immediately and take the unit to our  
Authorized Service Center for servicing.  
¡When a disc becomes dirty, clean it with a cleaning  
cloth. Wipe the disc from the center out. Do not wipe  
in a circular motion.  
¡
Do not use solvents such as benzine, thinner, commercial-  
ly available cleaners, detergent, abrasive cleaning agents  
or antistatic spray intended for analogue records.  
• Do not put your fingers or objects into the DVD/VCR  
cassette holder.  
CLEANING THE DISC LENS  
¡If this unit still does not perform properly although  
you refer to the relevant sections and to “TROU-  
BLESHOOTING GUIDE” in this Owner’s Manual, the  
laser optical pickup unit may be dirty. Consult your  
dealer or an Authorized Service Center for inspection  
and cleaning of the laser optical pickup unit.  
Moisture Condensation Warning  
Moisture condensation may occur inside the unit  
when it is moved from a cold place to a warm place,  
or after heating a cold room or under conditions of  
high humidity. Do not use this unit at least for 2 hours  
until its inside gets dry.  
DISC HANDLING  
¡Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
¡Always store the disc in its protective case when it is  
not used.  
About Copyright  
Unauthorized copying, broadcasting, public perfor-  
mance and lending of discs are prohibited.  
This product incorporates copyright protection tech-  
nology that is protected by method claims of certain  
U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses  
only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
AUTO HEAD CLEANING  
¡Automatically cleans video heads as you insert or  
remove a cassette, so you can see a clear picture.  
¡Playback picture may become blurred or interrupted  
while the TV program reception is clear. Dirt accu-  
mulated on the video heads after a long period of  
use, or the usage of rental or worn tapes can cause  
this problem. If a streaky or snowy picture appears  
during playback, the video heads in your DVD/VCR  
may need to be cleaned.  
1. Please visit your local Audio/Video store and pur-  
chase a good quality VHS Video Head Cleaner.  
2. If a Video Head Cleaner does not solve the problem,  
please call our help line mentioned on the front page  
to locate an Authorized Service Center.  
Symbol Used in This Manual  
NOTES:  
The following symbols appear in some head-  
ings and notes in this manual.  
¡Remember to read the instructions along with the  
video head cleaner before use.  
¡Clean video heads only when problems occur.  
VCR  
: Description refers to playback or recording of video  
cassette tapes.  
Note to CATV system installer  
DVD-V  
This reminder is provided to call the CATV system  
installer’s attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in par-  
ticular, specifies that the cable ground should be  
connected to the grounding system of the building,  
as close to the point of cable entry as practical.  
: Description refers to playback of DVD-Video discs.  
CD  
: Description refers to playback of Audio CDs.  
MP3  
: Description refers to playback of MP3 files.  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-  
marks of Dolby Laboratories.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Setup  
About the Video Cassettes and Discs  
Playable Video Cassettes  
Use only cassettes marked  
with this unit.  
Playable Discs  
Recorded  
signals  
Playable  
Mark (logo)  
discs  
Disc size  
Region code  
Disc types  
DVD-Video  
* 1,2,4,6  
or  
Example  
12 cm  
or  
8cm  
Title 1  
Title 2  
Digital video  
(MPEG2)  
DVD-R  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1  
Chapter 2  
DVD-RW  
-
-
* 1,2,3,4,5,6  
DVD+R  
DVD+RW  
* 1,2,3,4,5,6  
Digital audio  
MP3  
Example  
Audio CD  
* 4,6  
Track 1  
Track 2  
Track 5  
Track 6  
Track 6  
Track 3  
Track 4  
Track 4  
Digital audio 12 cm  
-
or  
or  
Example  
CD-R  
Group 1  
Group 2  
MP3  
8cm  
CD-RW  
Track 1  
Track 3  
Track 2  
Track 5  
* 4,5,6  
If you cannot play back a disc which bears one of the marks above, check the following notes.  
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.  
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.  
*3: Only the discs which have been recorded in the video format and finalized can be played back.  
Discs unfinalized or recorded in the video recording format cannot be played back.  
Depending on the recording status of a disc, the disc may not be played back at all or normally  
(the picture or sound may be not be smooth, etc.).  
*4: Scratched or stained discs may not be played back.  
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special  
properties of discs.  
*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back.  
Even if they are played back, the sound or video quality will be compromised.  
Unplayable Discs  
¡
On the following discs, only the sound can be heard (picture cannot be viewed).  
CDV  
CD-G  
¡
NEVER play back the following discs. Otherwise, malfunction may result!  
DVD-RAM  
CD-I  
Photo CD  
Video CD  
DVD with region codes other than 1 or ALL  
DTS-CD  
DVD-ROM for personal computers  
CD-ROM for personal computers  
¡
¡
On the following disc, the sound MAY NOT be heard.  
Super Audio CD  
Note: Only the sound recorded on the normal CD layer can be delivered.  
The sound recorded on the high density Super Audio CD layer cannot be delivered.  
Any other discs without compatibility indications.  
Connections  
Please refer to “Basic TV Connection” on the front page before you use this unit.  
RF Output Channel  
If channel 3 is already occupied for broadcasting,  
1) Set your TV to channel 4.  
2) Insert a pre-recorded tape into this unit.  
3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit.  
• If noise appears on the TV screen, press the VCR/TV button on the remote control.  
4) Press the PLAY button once.  
Hint  
• The RF output channel may  
not change when you adjust  
tracking during playback. In  
this case, stop the playback,  
and start the playback again.  
After that, press the PLAY  
button on the DVD/VCR for 3  
seconds again.  
5) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds.  
The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.  
• When a picture does not appear on the TV screen, repeat step [4].  
6) Press the STOP button to stop playback.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Hint for Cable Box or Satellite Box  
(Back of DVD/VCR)  
(Back of DVD/VCR)  
Connection B  
Connection A  
(Cable box or  
Satellite box)  
ANT-IN  
ANT-IN  
(Cable box or  
Satellite box)  
IN  
ANT-OUT  
OUT  
Cable  
Signal  
E
ANT-OUT  
E
IN  
OUT  
RF Cable  
(supplied)  
Cable  
Signal  
(Back of TV)  
(Back of TV)  
RF Cable (supplied)  
RF Cable  
Select this connection when you want to view or record a scram- Select this connection when you want to change channels on the  
bled channel. With this connection, channels cannot be changed DVD/VCR. With this connection, you may watch one channel  
on the DVD/VCR. You can view or record ONLY the channels you while recording another.  
have selected on the cable box or the satellite box.  
• While you are recording, only the recorded channel can be  
viewed.  
To select channels of the cable box or satellite box  
1) Turn on the DVD/VCR by pressing the POWER button, and  
You may not view or record a scrambled channel.  
To select channels of the cable box or satellite box  
1) At the cable box or satellite box, select channel 3 or 4 (the  
same channel as the DVD/VCR’s RF output channel.)  
• Refer to “RF Output Channel”.  
then, press the VCR/TV button.The “POWER” light on the front 2) At the TV, select the same channel as the output channel (3 or  
panel will appear. Then, press the CHANNEL buttons to select 4) of the cable box or satellite box.  
channel 3 or 4 (the same channel as the output channel of the 3) Turn on the DVD/VCR by pressing the POWER button, and  
cable b ox or satellite box).  
then, press the VCR/TV button. The “POWER” light on the front  
panel will appear. Then, select the channel you want to view or  
record.  
To play back a tape  
Follow the steps 1) to 2) above. Then, play back a tape.  
• Refer to “Playback” on page 11.  
• If you use the channel 4, you need to change the DVD/VCR’s  
RF output to channel 4. Refer to “RF Output Channel”.  
2) At the TV, select channel 3 or 4 (the same channel as you  
have selected at step 1).  
3) At the cable box or satellite box, select the channel you want to  
view or record.  
To view one channel while recording another  
1) While you are recording on the DVD/VCR, press the VCR/TV but-  
ton.  
2) At the cable box or satellite box, select the channel you want to view.  
Connection to an Audio System  
Method 1  
Method 2  
Dolby Digital decoder,  
MD deck or DAT deck  
Stereo system  
Analog audio  
input jacks  
AUDIO  
L
R
COAXIAL  
Digital audio  
input jack  
Audio Coaxial  
Digital cable  
(commercially  
available)  
Audio cable  
(supplied)  
DVD/VCR  
AUDIO OUT  
VCR  
DVD  
AUDIO S-VIDEO  
OUT OUT  
COMPONENT  
DIGITAL  
VIDEO OUT  
DVD/VCR  
DIGITAL  
AUDIO OUT  
AUDIO OUT  
L
Y
(Analog)  
AUDIO IN  
VIDEO IN  
L
AUDIO OUT  
R
C
C
B
R
COAXIAL  
VIDEO OUT  
R
or  
DVD  
Note  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
OUT OUT  
AUDIO OUT  
• If output is Dolby Digital encoded audio, connect to a Dolby  
Digital decoder, and set “DOLBY DIGITALto “ON” in the  
AUDIO menu. (Refer to pages 20-21.)  
• The audio source on a disc in a Dolby Digital 5.1 channel  
surround format cannot be recorded as digital sound by an  
MD or DAT deck.  
Y
L
C
C
B
R
COAXIAL  
R
• Unless connected to a Dolby Digital decoder, set “DOLBY  
DIGITALto “OFF” in the AUDIO menu. Playing a DVD  
using incorrect settings may generate noise distortion, and  
may also damage the speakers. (Refer to pages 20-21.)  
• Set “DOLBY DIGITALto “OFF” in the AUDIO menu for con-  
necting to an MD deck or DAT deck. (Refer to pages 20-  
21.)  
• By hooking this unit up to a Multi-channel Dolby Digital  
decoder, you can enjoy high-quality 5.1ch Dolby Digital  
surround sound as heard in the movie theaters.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Connection to a TV  
Method 1  
Method 2  
Method 3  
Basic Audio  
Good picture  
Better picture  
Best picture  
COMPONENT  
VIDEO IN  
TV  
AUDIO IN  
Y
S-VIDEO IN  
VIDEO IN  
L
R
CB  
CR  
S-Video  
cable  
(commercially  
Video  
cable  
(supplied)  
Audio cable  
(supplied)  
available)  
Component  
Video cables  
(commercially  
available)  
DVD/VCR  
AUDIO OUT  
VCR  
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
AUDIO OUT  
VCR  
DVD/VCR  
COMPONENT  
VIDEO OUT  
L
Y
L
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
AUDIO IN  
VIDEO IN  
COMPONENT  
VIDEO OUT  
AUDIO IN  
DIGITAL  
AUDIO S-VIDEO  
L
AUDIO OUT  
OUT  
OUT  
Y
L
AUDIO IN  
VIDEO IN  
L
R
C
B
R
R
COAXIAL  
C
B
R
VIDEO OUT  
R
DVD  
C
R
COMPONENT  
VIDEO OUT  
AUDIO S-VIDEO  
VIDEO OUT  
VIDEO OUT  
VIDEO IN  
R
OUT  
OUT  
Y
C
L
C
B
R
or  
VIDEO OUT  
S-VIDEO OUT  
DVD  
R
C
T  
DIGITAL  
AUDIO S-VIDEO  
OUT  
OUT  
AUDIO OUT  
C
L
COMPONENT VIDEO OUT  
C
COAXIAL  
R
C
(Analog) AUDIO OUT  
Note  
Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.  
The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT, and COMPONENT VIDEO OUT jacks are only useful in DVD mode.  
Front & Rear Terminals  
DVD ANALOG AUDIO OUT  
jacks  
DVD/VCR AUDIO OUT jacks  
Connect the supplied audio  
cables here through the audio  
AUDIO IN jack  
Connect audio cable coming  
from the audio out jack of a  
camcorder, another VCR, or an  
audio source here.  
Connect the supplied audio  
ANT IN jack  
Connect your antenna  
or cable box here.  
cables here through the Audio In jacks of a television or other  
In jacks of a television or other audio equipment.  
audio equipment. (DVD only)  
ANT-IN  
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
POWER  
REW  
F
.FWD  
S
COAXIAL jack  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
R  
VCR  
VIDEO  
AUDIO  
OUT  
OUT  
AUDIO OUT  
Connect an optional coaxial  
digital audio cable here  
through the coaxial digital  
audio in jack of a decoder or  
audio receiver. (DVD only)  
ANT-IN  
Y
L
UDIO IN  
O IN  
AUDIO IN  
VIDEO IN  
L
R
ANT-OUT  
ANT-OUT  
C
B
R
COAXIAL  
VIDEO OUT  
R
[Front of  
DVD/VCR]  
C
[Back of DVD/VCR]  
S-VIDEO OUT jack  
ANT OUT jack  
Connect the  
supplied RF  
cable to the  
antenna input  
jack on your TV.  
VIDEO IN jack  
Connect an optional  
S-Video cable here  
through the S-video  
in jack of a televi-  
sion. (DVD only)  
COMPONENT VIDEO  
OUT jacks  
DVD/VCR VIDEO OUT jack  
Connect a cable com-  
ing from the video out  
jack of a camcorder,  
another VCR, or an  
audio-visual source  
(laser disc player, video  
disc player, etc.) here.  
Connect the supplied yellow  
Connect optional component video cable here through  
video cables here through  
the component video in  
jacks of a television.  
(DVD only)  
the TV’s video in jack.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
About the Remote Control and Front Panel  
VCR mode  
DVD mode  
Disc/Tape  
(BAulpthtaobnetical order)  
Remote Control  
DVD-V  
CD  
MP3  
VCR  
1
4
7
2
5
8
0
3
To select channel.  
The +10 button has no effect  
in VCR mode.  
6
To select chapter or title directly. To select track directly.  
9
OPEN/CLOSE  
+1 0  
POWER  
/EJECT  
SPEED  
AUDIO  
To search forward/backward  
through a disc.  
To search forward/backward  
To forward/backward a tape.  
1
4
7
2
5
8
3
6
9
To begin slow forward/reverse  
playback during the pause mode.  
through a disc.  
SKIP/CH.  
To select an item  
VCR/TV  
SLOW  
on the VCR Menu.  
ENTER  
To move the cursor and  
To move the cursor and  
To advance to the next  
VCR Menu.  
determine its position.  
determine its position.  
0
VCR  
+1 0  
DVD  
To go back one step during  
DISPLAY  
PAUSE  
clock and timer setting.  
A-B  
To repeat between your  
To repeat between your  
chosen point A and B.  
chosen point A and B. (CD)  
PLAY  
ANGLE  
AUDIO  
To select camera angles on  
STOP  
a disc.  
REC/OTR  
MENU  
To select audio languages on To select STEREO,  
ENTER  
a disc.  
L-CH or R-CH. (CD)  
To clear the markers. (CD)  
SETUP TOP MENU  
RETURN  
CLEAR/  
C. RESET  
To clear the markers.  
To clear the numbers  
entered incorrectly.  
To remove status No.  
To exit the VCR Menu.  
SEARCH  
MODE  
CLEAR/  
C. RESET  
in program input.  
MODE  
V.SURR  
ANGLE  
To reset the tape counter.  
To clear the numbers  
SUBTITLE  
T-SET  
entered incorrectly.  
REPEAT  
A-B  
DISPLAY  
DVD  
To display the current disc  
To display the current disc  
To display the current time,  
mode.  
mode.  
tape counter, and channel.  
To select the DVD output  
To select the DVD output  
mode.  
mode.  
To activate the remote control To activate the remote control  
in DVD mode.  
in DVD mode.  
MENU  
MODE  
To call up the Menu  
To call up the MP3 menu.  
To call up the VCR Menu.  
on a disc.  
(MP3)  
To arrange the playing  
To set black level on/off.  
order or play randomly.  
OPEN/CLOSE  
/EJECT  
Installing the Batteries  
for the Remote Control  
To open or close the disc  
To open or close the disc  
To eject the video cassette  
tray.  
tray.  
from the VCR.  
To pause tape playback or  
recording.  
To advance playback  
one frame at a time.  
PAUSE  
To pause disc playback.  
To advance playback  
one frame at a time.  
To pause disc playback.  
Install two AA batteries  
(supplied) matching the polarity indi-  
cated inside battery compartment of  
the remote control.  
To begin tape playback.  
To begin disc playback.  
To begin disc playback.  
PLAY  
POWER  
To turn the unit on or off.  
To turn the unit on or off.  
To turn the unit on or off.  
1
2
3
REC/OTR  
REPEAT  
To start a recording.  
To play a track or disc  
repeatedly. (CD)  
To play a chapter or title  
repeatedly.  
To play a track, group or disc  
repeatedly. (MP3)  
RETURN  
To return to the previous  
operation on the DVD setup  
menu.  
To return to the previous  
operation on the DVD setup  
menu.  
To search track.  
To search chapter, title or time.  
To search time. (CD)  
SEARCH  
MODE  
To call up the index or time  
To rapidly return to  
a location of disc.  
To rapidly return to  
search menu.  
a location of disc.  
Search the markers.  
Search the markers. (CD)  
SETUP  
To call up the DVD setup  
To call up the DVD setup  
menu.  
menu.  
SKIP/CH.  
SKIP/CH.  
To change channels.  
To adjust the tracking manually  
during playback.  
To skip chapters.  
To skip tracks.  
SLOW  
To view the tape  
in slow motion.  
SPEED  
STOP  
Keep in mind the following when using  
the remote control:  
• Make sure that there is no obsta-  
cle between the remote and the  
remote sensor on the unit.  
• Use within the operating range  
and angle, as shown.  
To select the recording speed.  
To stop playback.  
To stop playback.  
To stop playback or recording.  
SUBTITLE  
T-SET  
To put the VCR into standby  
To select subtitles on a disc.  
mode for a timer recording.  
To return to the top file of the  
highest hierarchy in the program  
and MP3 menu. (MP3)  
TOP MENU  
VCR  
To call up the Top Menu  
on a disc.  
To select the VCR output  
mode.  
To activate the remote control  
in VCR mode.  
VCR/TV  
V.SURR  
To select DVD position or  
To select CD/MP3 position  
To select VCR position or  
TV position.  
or TV position.  
TV position.  
To set virtual surround on/off. To set virtual surround on/off.  
Remote  
control  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Front Panel Display  
Lights up when the disc is inserted.  
Lights up when the inserted  
Lights up during a recording.  
Flashes when a recording is paused.  
disc is being played back.  
Flashes when an unaccept-  
able disc is installed.  
OPEN/CLOSE  
OUTPUT  
POWER  
VCR  
DVD  
SKIP  
DISC IN  
STOP  
REW  
F.FWD STOP/EJECT PLAY  
/
REC/OTR  
H
PLAY  
G SKIP  
CHANNEL  
REV  
FWD  
Lights up when the timer recording  
or an OTR recording has been set.  
VCR/DVD Switching  
Because this product is a combination of a VCR and a DVD player, you must select first which  
component you wish to operate with the OUTPUT button.  
VCR MODE  
OPEN/CLOSE  
OPEN/CLOSE  
POWER  
/EJECT  
Press the VCR button on the remote control.  
SPEED  
AUDIO  
OUTPUT  
POWER  
VCR  
DVD  
SKIP  
DISC IN  
REW  
F
.FWD STOP/EJECT PLA  
Y
REC/OTR  
H
STOP  
PLAY  
G
SKIP  
CHANNEL  
/
REV  
FWD  
(Verify that the VCR OUTPUT light is lit.)  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
VCR/TV  
SLOW  
DVD MODE  
0
VCR  
+1 0  
DVD  
VCR button  
DVD button  
DISPLAY  
PAUSE  
Press the DVD button on the remote control.  
OUTPUT  
(Verify that the DVD OUTPUT light is lit.)  
PLAY  
STOP  
VCR  
DVD  
REC/OTR  
MENU  
Note  
ENTER  
DVD OUTPUT  
light  
• Pressing only the OUTPUT button on the front  
panel DOES NOT switch the mode of the  
remote control. You MUST select the correct  
mode on the remote control.  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
V.SURR  
ANGLE  
SUBTITLE  
T-SET  
REPEAT  
A-B  
OUTPUT button  
VCR OUTPUT  
light  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Preset for Use  
Turn on the unit for the first  
time  
To Preset the Channel Again  
1) Press the MENU button until the main  
4
CLOCK SET  
MONTH DAY YEAR  
0 3 1 5 2 0 0 4  
/
menu appears.  
or  
VCR  
HOUR MINUTE AM/PM  
– – – – – –  
2) Select "CHANNEL SET UP" by pressing  
the K or L button. Then, press the B but-  
ton.  
:
VCR  
1
Select the current year  
3) Select "AUTO SET UP" by pressing the  
K or L button. Then, press the B button.  
After scanning, the tuner stops on the low-  
est memorized channel.  
Turn on the TV and set it  
to channel 3.  
• If channel 3 is already occupied for broadcasting,  
see“RF Output Channel” section.  
To Change the On-Screen Language  
1) Press the MENU button until the main  
5
6
CLOCK SET  
MONTH DAY YEAR  
menu appears.  
0 3 1 5 MON 2 0 0 4  
/
or  
POWER  
2
Remote Control TV Screen  
2) Select "LANGUAGE SELECT" by press-  
HOUR MINUTE AM/PM  
0 5 – – – –  
:
ing the K or L button. Then, press the  
B
button.  
LANGUAGE SELECT  
3) Select "ENGLISH" , "FRANCAIS" or  
Select the current hour  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
"ESPAÑOL" by pressing the K or L but-  
ton. Then, press the CLEAR/C.RESET  
button.  
or  
Hint  
CLOCK SET  
MONTH DAY YEAR  
• If you accidentally select Spanish or  
French and need English: Press the  
MENU button and choose SELEC.  
0 3 1 5 MON 2 0 0 4  
/
or  
IDIOMA, or SELECTION LANGUE. Press  
the B button, and select ENGLISH. Finally,  
press the CLEAR/C.RESET button.  
HOUR MINUTE AM/PM  
0 5 4 0 – –  
3
CH 01  
:
AUTO SET UP  
Select the current minute  
Clock Set Up  
VCR  
VCR  
Do you connect the cable from the cable box or  
the satellite box to the DVD/VCR’s ANT IN jack?  
YES  
-MENU-  
1
MENU  
7
8
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
B CLOCK SET  
LANGUAGE SELECT  
CLOCK SET  
MONTH DAY YEAR  
0 3 1 5 MON 2 0 0 4  
/
or  
Yes Press the MENU  
HOUR MINUTE AM/PM  
button to exit  
0 5  
:
4 0  
P M AM  
B PM  
• Refer to “Hint for Cable Box  
or Satellite Box” section on  
• If the clock is not set, the  
or  
NO  
Select “AM” or “PM”  
CLOCK SET screen  
appears when you press  
the MENU button. In this  
case, go to step [2].  
page 6.  
No Please wait for a few minutes.  
After scanning...  
• The tuner stops on the lowest memorized  
channel.  
You can select only the channels memo-  
rized in this unit by using the CHANNEL  
buttons.  
• If "AUTO SET UP" appears on the TV  
screen again, check the cable connections.  
Then, press the B button once again.  
To exit the CLOCK SET  
screen.  
2
CLOCK SET  
MONTH DAY  
0 3 – –  
YEAR  
– – – –  
or  
/
HOUR MINUTE AM/PM  
– – – – – –  
:
Hint  
Hint  
Select the current month  
• Repeat these steps only if either there  
was a power failure or this unit has been  
unplugged for more than 30 seconds.  
To go back one step, press the s button  
(during the steps [2] to [7].)  
Your clock setting will be lost if either there  
is a power failure or this unit has been  
unplugged for more than 30 seconds.  
To Select a Channel  
You can select a channel by directly  
entering channel using the Number but-  
tons on the remote control.  
3
CLOCK SET  
MONTH DAY  
0 3 1 5  
YEAR  
– – – –  
/
or  
Notes for using the Number buttons:  
• When selecting cable channels which  
are higher than 99, enter channel  
numbers as a three-digit number.(For  
example: 117, press 1,1,7)  
HOUR MINUTE AM/PM  
– – – – – –  
:
Select the current day  
You must precede single-digit channel  
numbers with a zero (For example:  
02, 03, 04 and so on).  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
VCR Functions  
Playback  
Before:  
Turn on the TV and set it to  
channel 3.  
• If channel 3 is already occupied for broad-  
casting, see “RF Output Channel” section.  
4
1
Hint  
OPEN/CLOSE  
POWER  
/EJECT  
SPEED  
AUDIO  
• When a tape with-  
out record tab is  
inserted, the  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
OPEN/CLOSE  
DVD/VCR will start  
playback automati-  
cally.  
VCR  
VCR/TV  
SLOW  
VCR  
POWER  
V
REW  
F.FWD STOP/EJECT PLAY  
/
REC/OTR  
CHANNEL  
0
+1 0  
DISPLAY  
VCR  
DVD  
PAUSE  
Remote Control TV Screen  
Tracking will be  
1
3
2
4
automatically  
adjusted upon play-  
back. To adjust the  
tracking manually,  
press the CHAN-  
NEL buttons.  
PLAY  
2
PLAYB  
PLAY  
STOP  
3
REC/OTR  
3 2  
4
OPEN/CLOSE  
/EJECT  
STOP  
STOP  
EJECT  
A
Recording & OTR (One Touch Recording)  
Before:  
Turn on the TV and set it to  
3
6
Hint  
channel 3.  
To view one chan-  
nel while recording  
another  
• If channel 3 is already occupied for  
broadcasting, see “RF Output Channel” section.  
1
OPEN/CLOSE  
/EJECT  
2
POWER  
SPEED  
AUDIO  
VCR  
1) While you are  
recording on the  
DVD/VCR, press  
the VCR/TV button.  
2) At the cable box  
or satellite box,  
select the channel  
you want to view.  
• If you have connect-  
ed the DVD/VCR to  
a cable box or satel-  
lite box, refer to  
VCR  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
Remote Control TV Screen  
OPEN/CLOSE  
1
2
VCR/TV  
SLOW  
2
1
4
7
2
5
8
0
3
6
9
POWER  
SKIP/CH.  
0
VCR  
+1 0  
DVD  
REW  
F.FWD STOP/EJECT PLAY  
/
REC/OTR  
CHANNEL  
DISPLAY  
PAUSE  
CH12  
PLAY  
• Select the  
desired channel  
with tab  
STOP  
5
4
REC/OTR  
MENU  
5
6
4
• Select the desired tape  
speed  
“Hint for Cable Box  
or Satellite Box”  
section on page 6.  
ENTER  
3
4
SP  
SPEED  
Tape Speed  
Recording/Playback Time  
Type of tape  
SP mode  
SLP mode  
T60  
T120  
2hours  
6hour  
T160  
2-2/3hours  
8hour  
1hour  
3hour  
Accidental erasure prevention  
REC/OTR  
To prevent accidental recording on a record-  
ed cassette, remove its record tab. To record  
on it later, cover the hole with cellophane  
tape.  
REC  
You can select a fixed recording time by press-  
ing the REC/OTR button repeatedly.  
Record tab  
REC  
OTR(0:30)  
OTR(1:00).....  
(Normal recording)  
You CAN NOT copy a DVD to a videotape.  
OTR(8:00)  
OTR(7:30)  
To stop recording temporarily (Pause mode)  
5
6
OPEN/CLOSE  
/EJECT  
STOP  
EJECT  
A
Press the PAUSE/STILL button.  
STOP  
• During the rec-pause mode, five  
C
marks appear on the TV  
mark represents one minute.  
• Press it again to resume recording.  
screen. Each  
C
Other Operations  
To cue or review picture during playback  
(Picture Search)  
Counter Reset  
Hint  
Press the CLEAR/C.RESET button.  
Still/Slow/Pause  
mode will be  
Press the F.FWD or REW button.  
To play back in slow motion  
• Press it again and the DVD/VCR will search in  
super high speed. (in the LP/SLP modes only)  
automatically  
cancelled after 5  
minutes to pre-  
vent damage to  
the tape and the  
video head.  
Press the SLOW button during playback or the still  
mode.  
To freeze the picture on TV screen during play-  
• If the noise bars appear on the TV screen, you can  
reduce it by pressing the CHANNEL buttons.  
back (Still mode)  
Press the PAUSE/STILL button. Each time you  
press the button, the picture will be forwarded by  
one frame.  
To return to  
playback from  
the Picture  
Search/Still/  
Slow mode,  
press the PLAY  
button.  
Auto Rewind  
When a tape reaches its end during playback, fast-for-  
ward, or recording (except timer recording and One  
Touch Recording), the tape will automatically rewind  
to the beginning. After rewinding finishes, the  
DVD/VCR will eject the tape.  
• If the picture begins to vibrate vertically during the  
still mode, stabilize the picture by pressing the  
CHANNEL buttons.  
• If the picture is distorted or rolling vertically, adjust  
the vertical hold control on your TV, if equipped.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
On-Screen Operations  
VCR  
1
4
7
2
5
8
3
6
9
VCR  
SKIP/CH.  
VCR/TV  
SLOW  
1
To call up the main menu 3 To decide  
-MENU-  
MENU  
CHANNEL SET UP  
AUTO SET UP  
0
VCR  
+1 0  
DVD  
DISPLAY  
PAUSE  
B TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
LANGUAGE SELECT  
B MANUAL SET UP  
PLAY  
STOP  
REC/OTR  
MENU  
2
3
2
To select an item  
4
To exit the menu  
ENTER  
-MENU-  
CLEAR/  
C. RESET  
1
4
MENU  
SETUP TOP MENU  
RETURN  
or  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
B CHANNEL SET UP  
CLOCK SET  
OR  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
V.SURR  
ANGLE  
4
SUBTITLE  
T-SET  
REPEAT  
A-B  
LANGUAGE SELECT  
Recording Features  
Timer Recording  
•Insert a tape with its record tab into the DVD/VCR.  
VCR  
ONE TIME PROGRAM  
PROGRAM NUMBER  
9
5
Select the desired start time  
VCR  
4
DATE  
0 5 / 0 3 MON  
(hour)  
-MENU-  
or  
1
START TIME 0 7 : 3 0 PM  
END TIME 0 8 : 3 0 PM  
ONE TIME PROGRAM  
PROGRAM NUMBER  
B TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
MENU  
or  
4
CHANNEL  
1 6  
DATE  
0 5 / 0 3 MON  
REC SPEED SP  
B SP  
SLP  
START TIME 0 7 : 3 0 – –  
END TIME – – : – – – –  
LANGUAGE SELECT  
CHANNEL  
REC SPEED – –  
– –  
Select the desired recording speed  
To set another program after step [9], press the  
B
button. Then, continue with step [2].  
CLEAR/  
C. RESET  
Select the minute  
or  
2
PROGRAM NUMBER  
DATE – – / – –  
START TIME – – : – – – –  
END TIME – – : – – – –  
4
SUBTITLE  
T-SET  
10  
or  
CHANNEL  
– –  
REC SPEED – –  
• TIMER REC light on the front panel appears.  
The DVD/VCR will change to the DVD mode.  
Select an empty program  
number  
Hint  
ONE TIME PROGRAM  
PROGRAM NUMBER  
6
To go back one step, press the  
the steps [3] to [9].)  
s
button (during  
4
DATE  
0 5 / 0 3 MON  
START TIME 0 7 : 3 0 PM  
END TIME – – : – – – –  
or  
CHANNEL  
– –  
To Check, Correct, or Cancel a  
Timer Program  
REC SPEED – –  
AM  
3
4
B PM  
PROGRAM NUMBER  
4
B ONCE  
DAILY  
WEEKLY  
Select “AM” or “PM”  
1) Press the SUBTITLE/T-SET button  
then, the VCR button on the remote  
control.  
or  
2) Select main menu by pressing the  
MENU button.  
7
8
Repeat the procedure in steps 5  
and 6 to set the end time.  
Select “ONCE”, “DAILY”  
(Mon-Fri), or “WEEKLY”  
3) Select "TIMER PROGRAMMING"  
by pressing the K or L button.  
Then, press the B button.  
4) Select the program number which  
you want to check by pressing the  
or L button. The details of the pro-  
gram you selected will appear on  
the TV screen.  
K
Select the desired month  
ONE TIME PROGRAM  
ONE TIME PROGRAM  
or  
PROGRAM NUMBER  
DATE 0 5 / 0 3 MON  
START TIME 0 7 : 3 0 PM  
END TIME 0 8 : 3 0 PM  
4
PROGRAM NUMBER  
4
• Go to the digit you want to change  
by pressing the B or s button.  
Then, enter correct numbers by  
pressing the K or L button.  
You may cancel the entire program  
by pressing the s button while the  
program number flashes.  
5) Press the CLEAR/C.RESET button  
to exit.  
6) Press the SUBTITLE/T-SET button  
to return to timer stand-by mode.  
DATE  
0 5 / 0 3 MON  
START TIME – – : – – – –  
END TIME – – : – – – –  
or  
CHANNEL  
1 6  
REC SPEED – –  
CHANNEL  
– –  
REC SPEED – –  
Select the desired channel  
If you have connected the DVD/VCR to a  
cable box or satellite box as the  
Connection A on page 6, select the VCR  
to channel 3 or 4 (the RF output channel  
of the VCR). Then, select the desired  
channel at the cable box or satellite box.  
Leave the cable box or satellite box on for  
timer recording.  
Select the desired day  
or  
You can program one  
year in advance.  
To cancel a Timer Recording in  
progress  
Press the STOP/EJECT button on  
the DVD/VCR.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Hint for Timer Recording  
• If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting  
and all timer settings will be lost.  
• If a tape is not in the DVD/VCR or does not have the record tab, the TIMER REC light flashes and timer  
recording cannot be performed. Please insert a recordable tape.  
• If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automati-  
cally as the TIMER REC light flashes. (If the DVD power is off, the VCR will become STANDBY status).  
• When all timer recordings are finished, the TIMER REC light will flash.  
• When timer recordings are set, the TIMER REC light will appears. To use the VCR as usual until the time for  
the recording, press the SUBTITLE/T-SET button so that the TIMER REC light disappears. Press the VCR/TV  
button to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as  
described in this manual.  
If you want to use the DVD player during a VCR timer recording or while the TIMER REC light is on or  
flashes.  
You can use the DVD player while the TIMER REC light is on or flashes, or during a timer recording. Press  
the POWER button to turn on the DVD. Press the DVD button on the remote control to choose DVD mode,  
then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to  
use the DVD only.  
Copying a Video Tape  
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.  
1) Insert a pre-recorded tape into the playing VCR.  
(Back of TV)  
2) Insert a tape with its record tab into the recording  
(Back of another source)  
(Back of Recording DVD/VCR*)  
DVD/VCR.  
3) Press the SPEED button on the remote control  
of the recording DVD/VCR to select the desired  
recording speed (SP/SLP).  
I
DVD/VCR  
AUDIO OUT  
VCR  
2
I
AUDIO OUT  
1
or  
ANT-IN  
L
Connect  
AUDIO IN  
Connect  
R
R
VIDEO OUT
VIDEO OUT  
VIDEO IN  
ANT-OUT  
4) Select the "L1" or "L2" position on the recording  
RF cable  
(supplied)  
*Front input jacks are also available  
DVD/VCR.  
Audio/Video cables  
(not supplied)  
To use the input jacks on the back of this unit,  
select "L1" position by pressing [0], [0], [1] on  
the remote control or the CHANNEL buttons.  
Hint  
To use the input jacks on the front of this unit,  
select "L2" position by pressing [0], [0], [2] on  
the remote control or the CHANNEL buttons.  
• For best results during dubbing, use the front panel controls whenever  
possible. The remote control might affect another source’s operation.  
• Always use video-quality shielded cables with RCA-type connectors.  
Standard audio cables are not recommended.  
You can use a video disc player, satellite receiver, or other audio/video  
component with A/V outputs.  
5) Press the REC/OTR button on the recording  
DVD/VCR.  
6) Begin playback of the tape in another source.  
7) To stop recording, press the STOP/EJECT button  
on the recording DVD/VCR, then stop playback of  
the tape in another source.  
• “L1” or “L2” is found before the lowest memorized channel. (Example:  
CH02)  
• “L2” input jacks are on the front of this DVD/VCR.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Special Features  
Time Search  
Index Search  
Auto Repeat  
You can repeat playback of a  
whole tape automatically.  
You can specify the time for fast  
forwarding or rewinding.  
You can specify the number of pro-  
grams to be skipped.  
• Insert a tape into this unit.  
• Insert a tape into this unit.  
• Insert a tape into this unit.  
VCR  
VCR  
VCR  
VCR  
VCR  
VCR  
1
1
MENU  
-MENU-  
1
INDEX SEARCH  
TIME SEARCH  
SEARCH  
– : – –  
MODE  
SEARCH  
MODE  
– –  
TIMER PROGRAMMING  
B AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
LANGUAGE SELECT  
x2 (Twice)  
or  
x1 (Once)  
2
2
Select the desired length of  
time for fast forwarding or  
rewinding  
INDEX SEARCH  
0 3  
or  
-MENU-  
2
TIME SEARCH  
TIMER PROGRAMMING  
B AUTO REPEAT [ON]  
CHANNEL SET UP  
CLOCK SET  
2 : 5 0  
or  
01 ~ 20  
CURRENT PROGRAM  
Beginning  
LANGUAGE SELECT  
End  
of tape  
of tape  
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5  
02 01 01 02 03  
INDEX MARK  
0:01~ 9:59  
(1 minute~9 hours  
and 59 minutes)  
3
AUTO REPEAT  
B
To rewind  
To fast forward  
After searching,  
3
To rewind  
To fast forward  
After searching,  
3
4
Hint  
To cancel Auto Repeat, follow steps [1]-[2] above.  
Then, press the  
B
button, so that [OFF] appears  
beside AUTO REPEAT. Press the  
CLEAR/C.RESET button to exit.  
• If menu remains on the TV screen at step [3],  
press the CLEAR/C.RESET button to exit.  
4
PLAYB  
PLAYB  
Hint  
• This unit stores index mark at the beginning of  
the recording. There should be time gap between  
two index marks for the Index Search.  
Hint for Timer Search & Index Search  
• These functions are not available during recording.  
• Press the STOP button to stop the search.  
• If the end of the tape is reached during a Search, this unit will cancel the search and rewind the tape.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
DVD Functions  
Playback  
Before: Turn on the TV, amplifier and any other components which  
are connected to this unit. Make sure the TV and audio receiver  
(commercially available) are set to the correct channel.  
Hint  
OPEN/CLOSE  
/EJECT  
POWER  
• When you play an MP3  
file, details on page 16.  
SPEED  
AUDIO  
1
5
1
1
4
7
2
5
8
3
6
9
• A “prohibited icon” may  
SKIP/CH.  
(
p.16  
)
appear at the  
DVD-V  
DVD  
CD  
MP3  
top-right on  
VCR/TV  
SLOW  
the TV  
screen when the opera-  
tion is prohibited by the  
disc or this unit.  
0
VCR  
+1 0  
DVD  
DISPLAY  
PAUSE  
1
3
5
2
4
OPEN/CLOSE  
/EJECT  
POWER  
PLAY  
3
4
• Some DVDs may be  
played from title 2 or 3  
due to specific pro-  
grams.  
• During the playback of a  
two-layered disc, pic-  
tures may stop for a  
moment. This happens  
while the 1st layer is  
being switched to the  
2nd layer. This is not a  
malfunction.  
STOP  
REC/OTR  
2
Remote Control TV Screen  
OPEN/CLOSE  
STOP  
PLAY  
OUTPUT  
POWER  
VCR  
DVD  
SKIP  
DISC IN  
STOP  
REW  
F.FWD STOP/EJECT PLAY  
/
REC/OTR  
H
PLAY  
G SKIP  
CHANNEL  
REV  
FWD  
OPEN/CLOSE  
/EJECT  
1
5
1
4 3  
DVD menu  
To use the SKIP/REV, FWD/SKIP buttons on the  
Main Unit  
DVDs may contain menus to access special features. Press  
appropriate Number buttons or use the arrow (K/L/s/B)  
buttons to highlight your selection on the DVD main menu  
and press the ENTER button to confirm.  
DVD-V  
CD  
MP3  
Press once to skip chapters or tracks to a desired point.  
Press and hold to change forward or reverse playback  
speed.  
Calling up a Menu Screen during Playback  
Press the MENU button to call up the DVD menu.  
Press the TOP MENU button to call up the title menu.  
Note  
Fast Forward/Reverse Search  
Menu operations may vary depending on the disc. Refer to  
DVD-V  
CD  
MP3  
the manual accompanying the disc for details.  
Press the g or h button repeatedly dur-  
ing playback to select the required forward or  
reverse speed.  
To continue playback, press the PLAY  
button.  
For DVDs, fast forward or reverse search speed is different  
depending on the disc. Approximate speed is  
1(x2),2(x8),3(x50),4(x100).  
For Audio CDs, approximate speed is x16.  
For MP3, approximate speed is x8.  
E
1
Resume  
DVD-V  
CD  
MP3  
Press the STOP button. Resume message will appear on  
the TV screen.  
Press the PLAY button, play-  
back will resume from the  
point at which playback was  
stopped.  
Press 'PLAY' to play from here.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
Slow Forward/Slow Reverse  
To cancel resume, press the  
STOP button one more time  
during the Stop mode.  
DVD-V  
For MP3, playback will resume from the beginning of the  
Press the g or h button repeatedly dur-  
ing the pause mode to select the required for-  
1
track at which playback was stopped.  
ward or reverse speed.  
To continue playback, press the PLAY  
button.  
Paused and Step-by-Step Playback  
DVD-V  
CD  
MP3  
Slow forward or reverse speed is different depending on  
Press the PAUSE button during playback.  
To continue playback, press the PLAY  
button.  
the disc. Approximate speed is 1(1/16),2(1/8),3(1/2).  
Hint  
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow play-  
back mode are blurred. (Refer to pages 20-21.)  
DVD-V  
The disc goes forward by one frame each time the PAUSE  
button is pressed during the pause mode.  
To continue playback, press the PLAY button.  
Hint  
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause  
mode are blurred. (Refer to pages 20-21.)  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
MP3 Playback  
MP3 is a method of compressing files.You can copy MP3 files on CD-R/RWs from the computer and play the files on this unit.  
DVD  
2
MP3  
STOP  
Insert a MP3-format disc, then press  
the MENU button to call up the MP3  
menu on the TV screen.  
Hint  
1
MENU  
FILE LIST  
• Some selections may take a while to be recognized.  
DISC NAME  
FOLDER  
MP3  
• Press the TOP MENU button to return to the first item.  
• Folders are known as Groups; files are known as Tracks.  
• MP3 files are accompanied by  
• Folders are accompanied by  
folder name  
folder name  
folder name  
folder name  
1
2
3
4
file name  
file name  
file name  
1
2
3
3
icon.  
ENTER  
PLAY  
1/2  
folder name  
1
icon.  
• A maximum of 255 folders can be recognized.  
• A maximum of 512 files can be recognized.  
• Up to 8 hierarchies can be created.  
When selecting the folder:  
• Press the B button when you  
want to go to the next hierar-  
chy.  
• Press the s button when you  
want to go back to the previ-  
ous hierarchy.  
ENTER  
This player recommends the files recorded under the following circumstances:  
• Sampling frequency: 44.1kHz or 48kHz  
• Constant bit rate: 112kbps ~ 320kbps.  
The On-Screen Display  
You can check the information about the current disc by pressing the DISPLAY button on the remote control.  
DVD  
DVD  
DVD-V  
CD  
DISPLAY  
DISPLAY  
Current playback status  
4/12 0:03:21 - 0:02:15  
T
Remaining time of the current track  
Elapsed time of the current track  
Current playback status  
11/16 0:00:00 - 0:03:30  
Remaining time of the current chapter  
Elapsed time of the current chapter  
TR(Track):  
Current track number / Total tracks  
DISPLAY  
CH(Chapter):  
Current chapter number / Total chapters  
ALL:  
DISPLAY  
Current track number / Total tracks  
4/12 0:13:45 - 0:45:40  
T
Current repeat setting appears only when  
the repeat setting is active  
T: Track repeat  
1/3 0:00:00 - 1:23:45  
A: All Tracks repeat  
Remaining time of the current title  
Elapsed time of the current title  
A
B: A-B repeat  
Remaining time of the current audio CD  
Elapsed time of the current audio CD  
DISPLAY  
TT(Title):  
Current title number / Total titles  
DISPLAY  
T
L1  
DVD  
Layer numbers, appears only when playing  
a two-layered Disc  
MP3  
DISPLAY  
L0: Layer 0 is playing  
Current playback status  
L1: Layer 1 is playing  
TRACK 01  
Current repeat setting appears only when  
the repeat setting is active  
The name of the file currently in play  
will be displayed.  
C: Chapter repeat / T: Title repeat /  
DISPLAY  
A
B: A-B repeat  
TR(Track):  
Current Track number / Total Tracks  
BIT RATE: The amount of audio and video  
data currently being read  
1/36 0:01:15  
T
DISPLAY  
Current Repeat setting, if active  
T: Track repeat  
G: Group (folder) repeat  
A: Disc repeat  
Elapsed playing time of the current track  
DISPLAY  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Search Function  
Track Search  
Title / Chapter Search  
Time Search  
DVD  
DVD  
DVD  
CD  
MP3  
DVD-V  
DVD-V  
CD  
Using the number buttons  
1
Using the SEARCH MODE button  
1
2
PLAY  
TOTAL 1:29:00  
1
1
4
7
2
5
8
0
3
6
SEARCH  
MODE  
/12  
SEARCH  
MODE  
9
/29  
x repeatedly until this  
screen appears  
+1 0  
x1(Press once) for the chapter search  
x2 (Press twice) for the title search  
1
4
7
2
3
6
9
•For single digit tracks (1-9), press a  
single number (eg. track 3, press 3).  
To play track 26, press +10, 2, 6 of the  
Number buttons.  
TOTAL 1:29:00  
5
8
0
2
1
4
7
2
5
8
0
3
6
/12  
9
Within 30 seconds  
+1 0  
Using the SEARCH MODE button  
Within 30 seconds  
SEARCH  
1
• e.g. When there is no need to enter a  
number, “0” appears automatically. For  
example, “0:0_:_ _” appears in the  
Time Search display if the total time  
of the disc is less than 10 minutes.  
MODE  
/29  
H
G
Using the SKIP  
,
buttons  
1
2
1
4
7
2
5
8
0
3
6
PLAY  
/29  
Current Chapter  
(CH)  
9
+1 0  
CH 1 CH 2 CH 3 CH 4  
Within 30 seconds  
SKIP/CH.  
SKIP  
SKIP  
H
G
Using the SKIP  
,
buttons  
Note  
1
¡Depending on the disc being played,  
this function can also be performed by  
directly entering the desired chapter  
number with the number buttons.  
Refer to the manual accompanying  
the disc.  
PLAY  
Current Track  
(TR)  
TR 1 TR 2 TR 3 TR 4  
SKIP/CH.  
SKIP  
SKIP  
Marker Setup  
DVD  
To return to the marker  
later  
To exit the marker screen  
DVD-V  
CD  
This feature allows you to assign a specific  
point on a disc to be called back later.  
1
1
To set a marker  
RETURN  
PLAY  
1
PLAY  
SEARCH  
MODE  
x repeatedly until this  
screen appears  
SEARCH  
MODE  
x repeatedly until this  
screen appears  
Notes  
2
¡Opening the disc tray or turning off the  
power will erase all markers.  
¡Selecting “AC” at step [2] in the sec-  
tion “To set a marker” will also erase  
all markers.  
or  
2
or  
¡To clear a marker, select the marker to  
be cleared at step [2] in the section  
To return to the marker later, and  
then press the CLEAR/C.RESET but-  
ton.  
3
ENTER  
3
ENTER  
at the desired marker  
•Playback will restart from the specific point  
which you set.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Repeat / Random / Programmed Playback  
Repeat Playback  
Repeat A-B Playback  
Programmed Playback  
DVD  
DVD  
DVD-V  
DVD  
CD  
MP3  
DVD-V  
CD  
CD  
MP3  
You may determine the order in which  
tracks will play.  
1
PLAY  
A-  
Repeat function is available only during playback.  
1
STOP  
1
CD-DA  
TOTAL 0:00:00  
A-B  
PLAY  
at your desired starting point (A).  
ENTER  
MODE  
REPEAT  
2
x1 (Press once)  
A-B  
A-B  
2
Each time the REPEAT button is pressed...  
DVD-V  
CD-DA  
8 3:30  
TOTAL 0:08:00  
or  
at your desired end point (B).  
9 2:30  
10 1:30  
ALL CLEAR  
¡Point B should be in the same title  
or track as point A is.  
(current chapter repeat)  
(current title repeat)  
(repeat off)  
CHAPTER  
ENTER  
2/2  
8
3:30  
TITLE  
ENTER  
¡To exit the sequence, press the A-B  
button.  
¡To cancel Point A, press the  
CLEAR/C.RESET button.  
¡This function does not work in the  
other repeat modes.  
Up to 99 programs can be  
stored.  
OFF  
While a MP3 folder is open:  
• For the next hierarchy,  
press the B button.  
CD  
• For the previous hierarchy,  
press the s button.  
(current track repeat)  
(entire disc repeat)  
(repeat off)  
TRACK  
ALL  
3
PLAY  
Random Playback  
OFF  
This shuffles the playing order of tracks  
instead of playback in the sequence.  
Notes  
DVD  
MP3  
¡Press the CLEAR/C.RESET but-  
ton at step [2] to erase the most  
recently entered program.  
¡To erase all programs at once,  
select “ALL CLEAR’’ and press  
the ENTER button at step [2].  
¡While a program is being played  
back, the STOP button works as  
follows;  
CD  
MP3  
(current track repeat)  
(current group repeat)  
(entire disc repeat)  
(repeat off)  
TRACK  
GROUP  
ALL  
1
RANDOM  
STOP  
CD-DA  
TOTAL 0:45:55  
RANDOM PROGRAM  
--no indication--  
MODE  
PLAY  
OFF  
x2 (Press twice)  
2
¡Repeat setting will be cleared when  
moving to another title, chapter, or  
track.  
¡Repeat playback are not available  
with all discs or during repeat A-B  
playback.  
Press the STOP button and the  
PLAY button next, so that the pro-  
grammed playback restarts. (CD  
playback restarts from the current  
point. MP3 playback restarts from  
the beginning of the current track.)  
Press the STOP button twice and  
the PLAY button next, so that play-  
back restarts from the first track in  
the original order. However, your  
programmed playback can be  
restarted when you follow the above  
steps. (Your programs are still  
stored until either the disc tray is  
open or power is turned off.)  
PLAY  
Note  
¡If you want to repeat the current  
track in the random selections,  
press the REPEAT button repeat-  
edly until  
TRACK appears dur-  
ing playback. If you want to repeat  
the entire random selections,  
press the REPEAT button repeat-  
edly until  
playback.  
ALL appears during  
¡To repeat the current track in the  
program, press the REPEAT but-  
ton repeatedly until “  
TRACK’’  
appears during playback.  
¡To repeat the entire program press  
the REPEAT button repeatedly until  
ALL’ appears during playback.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Special Settings  
Subtitle Language  
Audio Language  
Stereo Sound mode  
DVD  
DVD  
DVD  
DVD-V  
DVD-V  
CD  
This unit allows you to select a subtitle  
language (if available) during DVD play-  
back.  
This unit allows you to select an audio  
language (if multiple languages are  
available) during DVD playback.  
This unit allows you to select a sound  
mode during CD playback.  
1
1
1
PLAY  
PLAY  
STEREO  
PLAY  
1.ENG/6  
1.ENG Dolby D 3/2.1ch 48k/3  
AUDIO  
AUDIO  
SUBTITLE  
T-SET  
Each time you press the AUDIO button;  
For example  
Each time you press the SUBTITLE/T-  
SET button, subtitle languages change.  
For example  
Each time you press the AUDIO button;  
(right and left channels  
are active)  
(left channel is active)  
STEREO  
L-CH  
(English audio)  
(Spanish audio)  
ENG  
(English subtitles)  
(French subtitles)  
ENG  
SPA  
FRE  
(right channel is active)  
R-CH  
Note  
¡If the Virtual Surround setting is “1’’ or  
“2’’, the sound mode will be fixed to  
STEREO, and can not be changed.  
(French audio)  
FRE  
OFF  
(no subtitles)  
Camera Angle  
Virtual Surround  
DVD  
To set subtitle ON/OFF  
1
DVD-V  
DVD-V  
CD  
MP3  
Some DVD discs may con-  
tain scenes which have  
DVD  
PLAY  
1.ENG/6  
been shot simultaneously  
from various angles. You can change  
You can enjoy stereophonic virtual  
world on your existing 2 channel stereo  
system.  
the camera angle if the (  
) icon  
SUBTITLE  
T-SET  
appears on the screen. If the “ANGLE  
ICON” setting is “OFF” in the Display  
1
menu, the (  
) icon will not appear.  
2
(Refer to pages 20-21.)  
PLAY  
OFF  
OFF  
1
PLAY  
V.SURR  
1 / 8  
Notes  
¡If your language is not shown after  
pressing the AUDIO or SUBTITLE/T-  
SET button several times, the disc  
may not have that language. However,  
some discs allow audio language or  
subtitle language setting on the disc  
menu. (Operation varies depending  
on the discs, so refer to the manual  
along with the disc.)  
¡When “NOT AVAILABLE” appears on  
the TV screen, it means no subtitle is  
recorded on the scene.  
¡If you choose a language that has a 3  
letter language code, the code will be  
displayed every time you change the  
subtitle language setting. If you choose  
any other languages, ‘---’ will be dis-  
played instead. (Refer to page 24.)  
ANGLE  
2
ENTER  
1
Black Level Setting  
DVD  
1: Natural effect  
2: Emphasized effect  
OFF: No effects (original sound)  
DVD-V  
Adjust the Black Level Setting to make  
the dark areas of the TV picture brighter.  
3
RETURN  
1
ON  
PLAY  
Note (for CD play back only)  
¡Virtual Surround will not be effective if  
the sound mode is set to something  
other than STEREO.  
MODE  
2
ENTER  
OFF  
ON: Makes the dark areas brighter.  
OFF: Shows the original picture as recorded.  
3
RETURN  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
DVD  
DVD Set Up  
QUICK SETUP Menu  
You can select the “PLAYER MENU”, “TV ASPECT”, or “DOLBY DIGITALfrom the QUICK SETUP menu quickly.  
or  
1
2
SETUP  
STOP  
Select the desired item  
<SETUP MENU>  
Confirm that QUICK is selected  
ENTER  
SETUP  
QUICK  
ENGLISH  
SETUP  
A
B
C
P20  
P21  
P21  
(Step 5)  
(Step 5)  
(Step 5)  
PLAYER MENU  
TV ASPECT  
QUICK  
CUSTOM  
INITIALIZE  
4:3 LETTER BOX  
ON  
DOLBY DIGITAL  
ENTER  
•Refer to the sections “PLAYER  
MENU”, “TV ASPECT”, or “DOLBY  
DIGITALsection on page 20 or 21.  
CUSTOM Menu  
You can change the DVD player’s settings.  
ENTER  
or  
or  
SETUP  
1
2
3
STOP  
to decide  
Select CUSTOM  
To select the desired item  
<SETUP MENU>  
ENTER  
SETUP  
CUSTOM  
SETUP  
SETUP  
LANGUAGE  
DISPLAY  
AUDIO  
QUICK  
CUSTOM  
INITIALIZE  
QUICK  
CUSTOM  
INITIALIZE  
PARENTAL  
LANGUAGE menu  
DISPLAY menu  
AUDIO menu  
PARENTAL menu  
SETUP  
LANGUAGE  
SETUP  
DISPLAY  
SETUP  
AUDIO  
SETUP  
PARENTAL  
PASSWORD  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
TV ASPECT  
STILL MODE  
ANGLE ICON  
4:3 LETTER BOX  
AUTO  
ON  
DRC  
ON  
Please enter a 4-digit password.  
SUBTITLE  
DISC MENU  
PLAYER MENU  
DOWN SAMPLING ON  
DOLBY DIGITAL ON  
AUTO POWER OFF ON  
page 20  
page 21  
page 21  
page 22  
A
B
C
D
LANGUAGE Setting  
A
Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.  
Select the desired language  
Select the desired item  
4
5
6
To exit the menu  
ENTER  
SETUP  
ENTER  
or  
or  
AUDIO 1 2  
(Default: ORIGINAL)  
Sets the audio language.  
AUDIO  
Hint  
ORIGINAL  
ENGLISH  
FRENCH  
1  
• Language options are not available with  
some discs.  
• If OTHER is selected on the AUDIO, SUBTI-  
TLE or DISC MENU screen, press four-digit  
number to enter the code for the desired lan-  
guage. (Refer to the language code list on  
page 24.)  
• Only the languages supported by the disc  
can be selected.  
2  
LANGUAGE menu  
SUBTITLE: 1 2  
(Default: OFF)  
Sets the subtitle language.  
SUBTITLE  
OFF  
ENGLISH  
FRENCH  
SETUP  
LANGUAGE  
AUDIO  
ORIGINAL  
SUBTITLE  
DISC MENU  
PLAYER MENU  
OFF  
ENGLISH  
ENGLISH  
DISC MENU: 1  
(Default: ENGLISH)  
Sets the language for DVD  
menu.  
DISC MENU  
ENGLISH  
FRENCH  
SPANISH  
• Language Setting for Audio and Subtitle is  
not available with some discs. Then use the  
AUDIO and the SUBTITLE/T-SET button.  
Details are on page 19.  
PLAYER MENU  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
QUICK  
PLAYER MENU:  
(Default: ENGLISH)  
Sets the language for the  
On-screen display.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
DISPLAY Setting  
B
You can change the display functions. Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.  
4
5
Select the desired item  
6 To exit the menu  
SETUP  
or  
QUICK  
TV ASPECT:  
(Default: 4:3 LETTER BOX)  
See Hint to the right.  
Select the  
desired  
setting  
ENTER  
TV ASPECT  
TV ASPECT  
STILL MODE  
ANGLE ICON  
4:3 LETTER BOX  
AUTO  
ON  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
or  
AUTO POWER OFF ON  
DISPLAY menu  
ENTER  
Hint  
SETUP  
DISPLAY  
STILL MODE:  
(Default: AUTO)  
See Hint to the right.  
TV ASPECT:  
Select the  
desired  
setting  
• Select “4:3 LETTER BOX”, so  
that black bars appear on the  
top and bottom of the screen.  
• Select “4:3 PAN & SCAN” for  
a full height picture with both  
sides trimmed.  
TV ASPECT  
STILL MODE  
ANGLE ICON  
4:3 LETTER BOX  
AUTO  
ON  
ENTER  
AUTO POWER OFF ON  
STILL MODE  
TV ASPECT  
STILL MODE  
ANGLE ICON  
4:3 LETTER BOX  
AUTO  
FIELD  
FRAME  
or  
AUTO  
ON  
AUTO POWER OFF ON  
• Select “16:9 WIDE” if a wide-  
screen TV is connected to this  
unit.  
ENTER  
ANGLE ICON:  
(Default: ON)  
Set to “ON” to show the angle icon when multiple camera  
angles are available during DVD playback.  
STILL MODE:  
• Select “AUTO” usually.  
• If you select “FIELD”, the pic-  
ture in the still mode will be  
stabilized.  
• If you select “FRAME”, the  
picture in the still mode will be  
highly defined.  
4:3 LETTER BOX  
TV ASPECT  
STILL MODE  
ANGLE ICON  
4:3 LETTER BOX  
AUTO  
ON  
AUTO  
OFF  
ON  
AUTO POWER OFF ON  
ENTER  
AUTO POWER OFF:  
(Default: ON)  
Set to “ON” to turn this unit off automatically after  
35 minutes of no use.  
TV ASPECT  
STILL MODE  
ANGLE ICON  
4:3 LETTER BOX  
AUTO  
ON  
4:3 LETTER BOX  
AUTO  
ON  
AUTO POWER OFF ON  
OFF  
ENTER  
AUDIO Setting  
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the step 1)  
to 3) in the “CUSTOM Menu” section on page 20.  
5
4
6 To exit the menu  
Select the desired item  
SETUP  
or  
DRC (Dynamic Range Control):  
(Default: ON)  
Set to “ON” to compress the range between soft and loud sounds.  
DRC  
ON  
OFF  
ON  
ON  
DOWN SAMPLING ON  
DOLBY DIGITAL  
ENTER  
ON  
Hint  
AUDIO menu  
DRC:  
DOWN SAMPLING:  
(Default: ON)  
Set to “ON” when outputting in 48 kHz.  
SETUP  
AUDIO  
• This function is available only  
on the discs which are record-  
ed in the Dolby Digital format.  
DRC  
ON  
DOWN SAMPLING ON  
DOLBY DIGITAL ON  
Set to “OFF” when outputting the original sound.  
DOWN SAMPLING:  
• When playing disc with copy-  
right Protection, the sound will  
be down sampled at 48kHz,  
even if you set to OFF.  
DRC  
ON  
ON  
OFF  
ON  
DOWN SAMPLING ON  
DOLBY DIGITAL  
ON  
ENTER  
• This function is available only  
on digital outputting of a disc  
recorded in 96kHz.  
QUICK  
DOLBY DIGITAL:  
(Default: ON)  
Set to “ON” when the unit is connected to a Dolby Digital receiver.  
• ON: Outputs a Dolby Digital Signals  
• OFF: Convert the Dolby Digital into PCM (2 channel)  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL ON  
ON  
ON  
ON  
OFF  
ENTER  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
PARENTAL Setting  
D
Parental Control limits the disc viewing that exceed your settings. (an incorrect password will not play.)  
This feature prevents your children from viewing inappropriate materials.  
Parental Levels  
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.  
Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.  
To exit  
the menu  
4
Enter your desired four-  
digit password (except  
for 4737)  
5
6
Select “PARENTAL  
LEVEL”  
Select the  
desired levels  
7
SETUP  
or  
or  
1
4
7
2
5
8
0
3
6
9
ENTER  
ENTER  
ENTER  
PARENTAL LEVEL  
ALL  
PARENTAL LEVEL  
CHANGE  
ALL  
8
7 [NC-17]  
6 [R]  
PARENTAL menu  
SETUP  
PARENTAL  
PASSWORD  
Please enter a 4-digit password.  
Hint  
CONTROL LEVELS  
• ALL:  
• Levels 8:  
or  
All parental locks are cancelled.  
DVD softwares of any grades (adult/general/children)  
can be played back.  
Only DVD softwares intended for general use and chil-  
dren can be played back.  
Only DVD softwares intended for children can be played  
back, with those intended for adult and general use pro-  
hibited.  
If you have set a password already,  
enter the current four-digit  
password.  
• Levels 7 to 2:  
• Level 1:  
SETUP  
PARENTAL  
PASSWORD  
Enter current password.  
To Change the Password for Parental Controls  
You can change your password for parental controls. Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.  
To exit  
the menu  
4
5
6
Select “CHANGE”  
Enter your new  
four-digit password  
(except for 4737)  
7
Enter your desired four-  
digit password (except  
for 4737)  
SETUP  
or  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
ENTER  
ENTER  
PARENTAL LEVEL  
CHANGE  
ALL  
Hint  
• Record the password in  
case you forget it.  
SETUP  
PASSWORD  
Please enter a 4-digit password.  
PARENTAL  
PARENTAL menu  
SETUP  
PARENTAL  
• If you forget the password,  
press 4, 7, 3, 7 at step 4,  
then enter your new pass-  
word.  
PASSWORD  
Enter current password.  
• Password will be cleared  
and parental levels will be  
set to ALL.  
To return the All Selections of SET UP (except for PARENTAL) to the Default Setting  
To exit  
the menu  
4
1
2
3
or  
or  
SETUP  
STOP  
SETUP  
ENTER  
ENTER  
Select “YES”  
Select INITIALIZE  
<SETUP MENU>  
x2  
(twice)  
SETUP  
INITIALIZE  
SETUP  
Hint  
• When you cancel  
to initialize at step  
3,select “NO”.  
SETUP  
Initialize?  
NO  
YES  
QUICK  
CUSTOM  
INITIALIZE  
QUICK  
CUSTOM  
INITIALIZE  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Information  
Troubleshooting Guide  
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.  
PROBLEM  
No power.  
CORRECTIVE ACTION  
• Make sure the power plug is connected to an AC outlet.  
• Make sure the power is turned on.  
D
V
D
V
C
R
This unit does not respond to • Check if the power plug is connected to an AC outlet.  
the remote control.  
• Check the batteries in the remote control.  
• Aim the remote control directly at the remote sensor. If necessary, remove all the  
obstacles between the sensor and the remote.  
You have to be within 23 feet of this unit.  
• Check if the right mode is selected. If it’s not in the right mode, press the DVD or  
VCR buttons, whichever you need, on the remote control.  
• Check if a cassette tape is in this unit.  
Tune your radio to an empty AM station so that you hear a lot of noises. Turn the vol-  
ume up, then. If you hear some signal sound from the radio in response to your  
pressing buttons on the remote, the remote control is working.  
Timer recording is impossible. • Make sure the timer recording is set correctly.  
V
C
R
• Make sure the TIMER REC light appears on the DVD/VCR. If not, press the SUBTI-  
TLE/T-SET button.  
• Make sure the VCR clock is set correctly.  
Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.  
• Activate this unit in VCR mode. Press the VCR button on the remote control so that the  
green VCR OUTPUT light is lit.  
(
)
Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL  
buttons  
on the DVD/VCR or the SKIP/CH.(K/L)buttons on the remote control.  
Cannot view a tape but the  
audio is OK.  
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .  
• Make sure the VCR is not in the Menu mode.  
No, or poor, playback picture.  
• Change the RF output channel to CH4. Then select the same channel on the TV.  
• Fine tune your TV.  
TV programs cannot be seen  
normally.  
• Re-check the ANT. IN and ANT. OUT connections. See pages 1 and 6.  
• Press the VCR/TV button.  
Press the VCR button on the remote control to activate it in the VCR mode. Check if the green  
VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.  
You cannot copy a copyrighted video tape. You are experiencing copy guard protection.  
Video or color fades in and out when  
making a copy of a video tape.  
Cannot remove the tape.  
• Check if this unit is in the VCR mode. If not, press the VCR button on the remote control  
to switch the mode.  
No picture.  
• Connect the video cables firmly.  
D
V
D
• Insert a correct video disc that plays on this unit.  
• Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then  
try other DVD features.  
• Insert the disc.  
• Clean the disc.  
.
Disc cannot be played  
• Place the disc correctly with the label side up.  
• Cancel the parental lock or change the control levels.  
• Handle a disc with special care so that it does not have fingerprints, scratches, or  
dusts on its surface.  
.
• Connect the audio cables firmly.  
Turn the power of the audio component on.  
• Correct the audio output settings.  
No sound  
• Correct the input settings on the audio component.  
• This unit does not support DTS audio. This is not a malfunction.  
• Connect this unit directly to the TV.  
.
No DTS audio is output  
.
Distorted picture  
There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.  
• Although pictures may stop for a moment, this is not a malfunction.  
Audio or subtitle language  
does not match the set up.  
The camera angle cannot be  
changed.  
The selected language is not available for audio or subtitles on the DVD.  
This is not a malfunction.  
The DVD does not contain sequences recorded from different camera angles.  
This is not a malfunction.  
Audio or subtitle language  
cannot be changed.  
• The DVD does not contain audio source or subtitles in the selected language.  
This is not a malfunction.  
“Prohibited icon” appears on the • That operation is prohibited by this unit or the disc.  
screen, prohibiting an operation This is not a malfunction.  
The PLAY indicator on the front An unacceptable disc is installed.  
panel flashes.  
Insert a playable disc.  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual  
for details on correct operations.  
Playback from a desired track and random playback are not available during program playback.  
Some functions are prohibited on some discs.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Specifications  
• Designs and specifications are subject  
to change without notice.  
• If there is a discrepancy between lan-  
guages, the default language will be  
English.  
Video Heads :  
Operating temperature :  
41°F (5°C) to 104°F (40°C)  
Dimensions :  
W : 17 3/16”(435mm)  
H : 3 3/4” (94mm)  
D : 9 3/16” (233mm)  
Weight :  
Four Heads  
Output signal format :  
NTSC color  
Power source :  
120 V AC +/- 10%, 60 Hz +/- 0.5%  
Power consumption :  
21 W (standby: 3.6W)  
Approx 6lbs (2.7kg)  
Language List  
Language  
Code  
Language  
French [FRE]  
Frisian  
Galician  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Hindi  
Hungarian [HUN]  
I-K  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Code  
Language  
Macedonian  
Malagasy  
Malay  
Code  
Language  
Siswat  
Slovak  
Slovenian  
Somali  
Code  
A-B  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Malayalam  
Maltese  
Maori  
Spanish [SPA]  
Sundanese  
Swahili  
Marathi  
Moldavian  
Mongolian  
Nauru  
Swedish [SWE]  
T
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Nepali  
Norwegian [NOR]  
O-R  
Occitan  
Bengali;Bangla  
Bhutani  
Bihari  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
C-E  
Cambodian  
Catalan  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
U-Z  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Chinese [CHI]  
Corsican  
Croatian  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
Czech  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
Korean [KOR]  
Kurdish  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
5861  
5847  
5868  
5860  
5866  
F-H  
Setswana  
Shona  
Sindhi  
Faroese  
Fiji  
Finnish [FIN]  
5261  
5256  
5255  
Singhalese  
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If  
you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)  
Limited Warranty  
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA  
in the event of defect in materials or workmanship as follows:  
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUEN-  
TIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF  
OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE  
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF  
ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WAR-  
RANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED  
BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED  
BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS  
VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SER-  
VICE FACILITY.  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts  
without charge for one (1) year from the date of original retail  
purchase. Two (2) years for Picture Tube. Certain parts are  
excluded from this warranty.  
FUNAI CORP. will provide the labor without charge for a peri-  
od of ninety (90) days from the date of original retail pur-  
chase.  
LABOR:  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PUR-  
CHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL  
RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PROD-  
UCT TO OBTAIN SERVICE UNDER THIS WARRANTY.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU  
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT  
ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO  
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE  
CONTACT FUNAI CORP.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are  
altered, replaced, defaced, missing or if service was attempted by an unau-  
thorized service center. This SYLVANIA Limited warranty does not apply to  
any product not purchased and used in the United States.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF  
THIS PRODUCT WITHOUT PRIOR NOTICE.  
To locate your nearest SYLVANIA Authorized Service Center or for gen-  
eral service procedure, please call 1-800-968-3429 or write to the fol-  
lowing:  
This warranty only covers failures due to defects in material or workmanship  
which occurs during normal use. It does not cover damage which occurs in  
shipment, or failures which are caused by repairs, alterations or product not  
supplied by FUNAI CORP., or damage which results from accident, misuse,  
abuse, mishandling, misapplication, alteration, faulty installation, improper  
maintenance, commercial use such as hotel, rental or office use of this  
product or damage which results from fire, flood, lightning or other acts of God.  
FUNAI CORPORATION, INC.  
SERVICE CENTER  
19900 Van Ness Avenue, Torrance, CA 90501  
Tel :1-800-968-3429  
Head Office: 100 North Street, Teterboro, NJ 07608  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY  
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC  
PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Español  
Conexiones  
Activación de la unidad  
por primera vez  
Ajuste del reloj  
1
5
4
VCR  
Consulte la "Conexión básica del  
televisor" en la página delantera  
antes de utilizar esta unidad.  
VCR  
VCR  
-MENU-  
1
MENU  
VCR  
PROGRAMAR  
AUTOREPETIR [OFF]  
AJUSTE CANAL  
B AJUSTE DE RELOJ  
SELEC. IDIOMA  
Canal de salida RF  
Si el canal 3 se está utilizando para  
una transmisión.  
1)Programe su televisor al canal 4.  
2)Inserte una cinta pregrabada en esta  
unidad.  
3)Pulse el botón OUTPUT en el  
DVD/VCR para que se encienda la  
luz VCR OUTPUT.  
1
Encienda el televisor y sin-  
tonice al canal 3.  
• Si el canal 3 se está utilizando para una trans-  
misión, vea la sección "Canal de salida RF".  
Si no se ha ajustado el reloj,  
aparece la pantalla AJUSTE  
DE RELOJ cuando pulse el  
botón MENU. En este caso,  
vaya al paso (2).  
o
• Si aparecen ruidos en la pantalla del  
televisor,pulse el botón VCR/TV en  
el mando a distancia.  
4)Pulse una vez el botón PLAY.  
5)Después de unos segundos, pulse el  
botón PLAY en el DVD/VCR durante  
3 segundos.  
• El canal de salida RF cambiará del  
canal 3 al canal 4 y podrá ver una  
imagen reproducida.  
• Cuando no aparezca una imagen en  
la pantalla del televisor, repita el  
paso (4).  
POWER  
2
Mando a distancia  
Pantalla del televisor  
SELEC. IDIOMA  
ENGLISH  
2
3
4
5
AJUSTE DE RELOJ  
MES  
0 3  
DIA  
– –  
AÑO  
– – – –  
o
/
FRANCAIS  
o
B ESPAÑOL  
[ON]  
HORA MINUTO AM/PM  
– – – – – –  
:
Seleccione el mes actual  
AJUSTE DE RELOJ  
MES  
0 3  
DIA  
1 5  
AÑO  
– – – –  
3
CA 01  
/
6)Pulse el botón STOP para parar la  
reproducción.  
o
HORA MINUTO AM/PM  
– – – – – –  
:
AJUSTE AUTO  
Instalación de las pilas  
del mando a distancia  
Seleccione el día actual  
2
3
2
1
Conecta el cable de la caja de canales de cable o la  
caja de satélite en la toma ANT IN de DVD/VCR?  
SI  
AJUSTE DE RELOJ  
MES  
0 3  
DIA  
1 5  
AÑO  
2 0 0 4  
/
o
HORA MINUTO AM/PM  
– – – – – –  
Si  
Pulse el botón  
MENU para salir.  
:
Seleccione el año actual  
NO  
Conmutación VCR/DVD  
3
No Espere unos minutos.  
Después del escaneo  
• El sintonizador se detiene en el canal  
memorizado más abajo.  
• Puede seleccionar sólo los canales memo-  
rizados en esta unidad con los botones  
CANAL.  
OPEN/CLOSE  
OPEN/CLOSE  
/EJECT  
POWER  
SPEED  
AUDIO  
OUTPUT  
POWER  
VCR  
DVD  
D
I
S
C
IN  
REW  
F
.
F
W
D
S
T
O
P
/
E
J
E
C
T
P
L
A
Y
REC/OTR  
SKIP  
H
STOP  
PLAY  
G
SKIP  
CHANNEL  
/
AJUSTE DE RELOJ  
REV  
FWD  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
MES  
0 3  
DIA  
AÑO  
VCR/TV  
SLOW  
/
1 5 LUN 2 0 0 4  
o
0
VCR  
+
DVD  
1 0  
VBCoRnbuVtCtoRn  
DBVoDnbuDttVoDn  
DISPLAY  
PAUSE  
HORA MINUTO AM/PM  
0 5 – – – –  
OUTPUT  
:
PLAY  
STOP  
VCR  
DVD  
REC/OTR  
MENU  
Seleccione la hora actual  
ENTER  
LDuVzD OUTPUT  
DligVhDt OUTPUT  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
V.SURR  
ANGLE  
SUBTITLE  
T
-SET  
REPEAT  
A-B  
BOoUtTónPUOTUbTuPtUtoTn  
6
AJUSTE DE RELOJ  
LVuCzR OUTPUT  
VligChRt OUTPUT  
MES  
0 3  
DIA  
AÑO  
/
1 5 LUN 2 0 0 4  
o
HORA MINUTO AM/PM  
0 5 4 0 – –  
:
MODO VCR  
Seleccione los minutos actuales  
AJUSTE DE RELOJ  
Pulse el botón VCR en el mando a dis-  
tancia.  
(Compruebe que está encendida la luz  
VCR OUTPUT.)  
7
8
MODO DVD  
Pulse el botón DVD en el mando a dis-  
tancia  
(Compruebe que está encendida la luz  
DVD OUTPUT.)  
MES  
0 3  
DIA  
AÑO  
/
1 5 LUN 2 0 0 4  
o
HORA MINUTO AM/PM  
0 5  
:
4 0  
P M AM  
B PM  
Seleccione "AM" o "PM".  
Nota  
• Si pulsa sólo el botón OUTPUT en el  
panel frontal NO conmuta el modo del  
mando a distancia. DEBE seleccionar  
también el modo correcto en el  
mando a distancia.  
Para salir de la pantalla AJUSTE DE  
RELOJ.  
ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Español  
Reproducción de la grabadora de vídeo  
Reproducción de DVD/CD  
6
7
Antes: Encienda el televisor y cambie al canal 3.  
• Si el canal 3 se está utilizando para una transmisión, vea la  
sección "Canal de salida RF".  
Antes: Encienda el televisor, amplificador y otros equipos que puedan estar  
conectados a esta unidad. Asegúrese que el televisor y el sintoamplificador de  
audio (de venta en los comercios) están en el canal correcto.  
DVD  
VCR  
VCR  
DVD-V  
CD  
4
OPEN/CLOSE  
/EJECT  
OPEN/CLOSE  
/EJECT  
POWER  
POWER  
Mando a distancia  
Pantalla del televisor  
SPEED  
AUDIO  
SPEED  
AUDIO  
1
3
2
1
3
2
4
1
5
1
OPEN/CLOSE  
/EJECT  
POWER  
1
4
7
2
5
8
3
6
9
1
4
7
2
5
8
3
6
9
REPRODUCIR  
B
SKIP/CH.  
SKIP/CH.  
PLAY  
VCR/TV  
SLOW  
VCR/TV  
SLOW  
Mando a distancia  
Pantalla del televisor  
0
VCR  
+1 0  
DVD  
0
VCR  
+1 0  
DVD  
DISPLAY  
PAUSE  
DISPLAY  
PAUSE  
STOP  
4
PLAY  
OPEN/CLOSE  
/EJECT  
PLAY  
PLAY  
STOP  
PARAR  
EXPULSAR  
A
STOP  
STOP  
3
REC/OTR  
REC/OTR  
OPEN/CLOSE  
/EJECT  
5
2
3
4
Mando a distancia  
8
Modo DVD  
Modo de grabadora de vídeo  
Disco/cinta  
(BOordteónnalfabético)  
1
4
7
2
5
8
0
3
Para seleccionar el canal.  
El botón +10 no tiene efecto  
en el modo de grabadora de  
vídeo.  
6
Para seleccionar directamente  
el capítulo o el título.  
Para seleccionar directamente  
la canción.  
9
+1 0  
Para buscar en avance/retroceso  
en un disco.  
Para empezar la reproducción en avance/  
retroceso lento durante el modo de pausa.  
Para buscar en avance/  
retroceso en un disco.  
Para el avance/retroceso  
de una cinta.  
Para seleccionar un ítem  
en el menú de la grabadora  
de vídeo.  
Para avanzar al siguiente  
menú de la grabadora de  
vídeo.  
Para volver un paso  
durante el ajuste del reloj y  
temporizador.  
ENTER  
Para mover el cursor y  
determinar su posición.  
Para mover el curso y  
determinar su posición.  
OPEN/CLOSE  
POWER  
/EJECT  
SPEED  
AUDIO  
A-B  
Para repetir entre los puntos  
A y B elegidos  
Para repetir entre los puntos A  
y B elegidos (disco compacto)  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
ANGLE  
AUDIO  
Para seleccionar los ángulos  
de la cámara en un disco.  
VCR/TV  
SLOW  
Para seleccionar el idioma de Para seleccionar ESTÉREO,  
audio en un disco.  
L-CH o R-CH (disco compacto)  
Para borrar los marcadores.  
CLEAR/  
C. RESET  
0
VCR  
+1 0  
DVD  
(Disco compacto)  
Para salir del menú de la  
grabadora de vídeo.  
Para reponer el contador de  
cinta.  
Para borrar los marcadores.  
Para borrar los números  
entrados incorrectamente.  
Para retirar el Nº de estado  
en la entrada de programa.  
Para borrar los números  
entrados incorrectamente.  
DISPLAY  
PAUSE  
DISPLAY  
DVD  
Para indicar el modo de  
disco actual.  
Para indicar el modo de  
disco actual.  
Para indicar la hora actual,  
contador de cinta y canal.  
PLAY  
Para seleccionar el modo  
de salida de DVD.  
Para seleccionar el modo de  
salida de DVD  
STOP  
Para activar el mando a  
distancia en el modo DVD.  
Para llamar el menu en un  
Para activar el mando a  
distancia en el modo DVD  
REC/OTR  
MENU  
MENU  
MODE  
Para llamar el menú MP3  
(MP3)  
Para llamar el menú de la  
grabadora de vídeo.  
disco.  
ENTER  
Para disponer el orden de  
reproducción o la  
reproducción aleatoria.  
Para activar/desactivar el  
nivel del negro.  
SETUP TOP MENU  
RETURN  
OPEN/CLOSE  
/EJECT  
SEARCH  
MODE  
CLEAR/  
MODE  
V.SURR  
ANGLE  
C. RESET  
Para abrir o cerrar la bandeja Para abrir o cerrar la bandeja Para expulsar el videocasete  
del disco.  
del disco.  
de la grabadora de vídeo.  
SUBTITLE  
T-SET  
REPEAT  
A-B  
Para hacer una pausa de la  
reproducción o grabación de la cinta.  
Para avanzar la reproducción  
un cuadro a la vez.  
Para hacer una pausa de  
reproducción del disco.  
Para avanzar la reproducción  
un cuadro a la vez.  
PAUSE  
Para hacer una pausa en la  
reproducción del disco.  
Para empezar la reproducción  
del disco.  
Para empezar la reproducción  
del disco.  
Para empezar la reproducción  
de la cinta.  
PLAY  
POWER  
Para activar o desactivar la  
unidad.  
Para activar o desactivar la  
unidad.  
Para activar o desactivar la  
unidad.  
REC/OTR  
REPEAT  
Para empezar una grabaciòn.  
Para reproducir repetidamente una  
Para reproducir repetidamente canción o disco (Disco compacto)  
un capítulo o título.  
Para reproducir repetidamente una  
canción, grupo o disco (MP3).  
Para volver a la operación  
RETURN  
Para volver a la operación  
previa en el menú de  
programación de DVD.  
previa en el menú de  
programación de DVD.  
Para buscar una canción.  
Para buscar un capítulo, título u hora.  
Para volver rápidamente a un  
lugar o disco.  
Para buscar la hora (Disco compacto)  
SEARCH  
MODE  
Para llamar el menú de  
búsqueda de índice u hora.  
Para volver rápidamente a un lugar  
o disco.  
Buscar los marcadores.  
Para llamar el menú de  
Buscar los marcadores. (Disco compacto)  
SETUP  
Para llamar el menú de  
programación de DVD.  
programación de DVD.  
SKIP/CH.  
SKIP/CH.  
Para cambiar de canal.  
Para ajustar manualmente el  
seguimiento durante la reproducción.  
Para saltar capítulos  
Para saltar canciones.  
SLOW  
Para ver la cinta en cámara  
lenta.  
SPEED  
STOP  
Para seleccionar la velocidad  
de grabación.  
Para parar la reproducción o  
grabación.  
Para parar la grabación.  
Para parar la grabación.  
SUBTITLE  
T-SET  
Para poner la grabadora de  
vídeo en el modo de espera  
para una grabación con temporizador.  
Para seleccionar subtítulos  
en un disco.  
Para volver al archivo superior  
de la jerarquía más alta en el  
programa y menú MP3. (MP3)  
TOP MENU  
VCR  
Para llamar el menú superior  
en un disco.  
Para seleccionar el modo de  
salida de la grabadora de vídeo.  
Para activar el mando a distancia  
en el modo de la grabadora de vídeo.  
VCR/TV  
V.SURR  
Para seleccionar la posición  
de DVD o posición del televisor.  
Para seleccionar la posición de  
CD/MP3 o la posición del televisor.  
Para seleccionar la posición de la  
grabadora de vídeo o posición del televisor.  
Para activar/desactivar el  
envolvente virtual.  
Para activar/desactivar el  
envolvente virtual.  
ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Quick Use Guide  
Connections  
Turn on the unit for the  
Clock Set Up  
1
5
4
first time  
VCR  
Please refer to “Basic TV  
Connection” on the front page  
before you use this unit.  
VCR  
VCR  
-MENU-  
1
MENU  
VCR  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
B CLOCK SET  
LANGUAGE SELECT  
RF Output Channel  
If channel 3 is already occupied for  
broadcasting,  
1)Set your TV to channel 4.  
2)Insert a pre-recorded tape into this  
unit.  
3)Press the OUTPUT button on the  
DVD/VCR so that the VCR OUTPUT  
light is lit.  
1
Turn on the TV and set it  
to channel 3.  
• If channel 3 is already occupied for broadcasting,  
see“RF Output Channel” section.  
• If the clock is not set, the  
CLOCK SET screen  
or  
appears when you press  
the MENU button. In this  
case, go to step [2].  
• If noise appears on the TV screen  
press the VCR/TV button on the  
remote control.  
,
POWER  
2
Remote Control TV Screen  
LANGUAGE SELECT  
2
3
4
5
4)Press the PLAY button once.  
CLOCK SET  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
5)After a few seconds, press the PLAY  
button on the DVD/VCR for 3 sec-  
onds.  
• The RF output channel will change  
to channel 4 from channel 3 and you  
will see a playback picture.  
• When a picture does not appear on  
the TV screen, repeat step [4].  
6)Press the STOP button to stop play-  
back.  
MONTH DAY  
0 3 – –  
YEAR  
– – – –  
or  
/
or  
HOUR MINUTE AM/PM  
– – – – – –  
:
Select the current month  
CLOCK SET  
MONTH DAY  
0 3 1 5  
YEAR  
3
CH 01  
/
– – – –  
or  
or  
or  
HOUR MINUTE AM/PM  
– – – – – –  
:
Installing the Batteries  
for the Remote Control  
AUTO SET UP  
2
Select the current day  
3
2
1
Do you connect the cable from the cable box or  
the satellite box to the DVD/VCR’s ANT IN jack?  
CLOCK SET  
MONTH DAY  
0 3 1 5  
YEAR  
2 0 0 4  
YES  
/
HOUR MINUTE AM/PM  
– – – – – –  
Yes Press the MENU  
:
VCR/DVD Switching  
3
button to exit  
Select the current year  
NO  
OPEN/CLOSE  
OPEN/CLOSE  
/EJECT  
POWER  
SPEED  
AUDIO  
OUTPUT  
POWER  
VCR  
DVD  
D
I
S
C
IN  
No Please wait for a few minutes.  
After scanning...  
REW  
F
.
F
W
D
S
T
O
P
/
E
J
E
C
T
P
L
A
Y
REC/OTR  
SKIP  
H
STOP  
PLAY  
G
SKIP  
CHANNEL  
/
REV  
FWD  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
CLOCK SET  
VCR/TV  
SLOW  
MONTH DAY  
YEAR  
0
VCR  
+
DVD  
1 0  
• The tuner stops on the lowest memorized  
VCR button  
DVD button  
0 3 1 5 MON 2 0 0 4  
/
DISPLAY  
PAUSE  
channel.  
OUTPUT  
PLAY  
STOP  
HOUR MINUTE AM/PM  
0 5 – – – –  
You can select only the channels memo-  
rized in this unit by using the CHANNEL  
buttons.  
:
VCR  
DVD  
REC/OTR  
MENU  
ENTER  
DVD OUTPUT  
light  
Select the current hour  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
V.SURR  
ANGLE  
SUBTITLE  
T
-SET  
REPEAT  
A-B  
OUTPUT button  
VCR OUTPUT  
light  
6
CLOCK SET  
MONTH DAY  
YEAR  
0 3 1 5 MON 2 0 0 4  
/
or  
VCR MODE  
HOUR MINUTE AM/PM  
0 5 4 0 – –  
:
Press the VCR button on the remote  
Select the current minute  
CLOCK SET  
control.  
(Verify that the VCR OUTPUT light is lit.)  
DVD MODE  
Press the DVD button on the remote  
control.  
7
8
MONTH DAY  
YEAR  
0 3 1 5 MON 2 0 0 4  
/
or  
(Verify that the DVD OUTPUT light is lit.)  
HOUR MINUTE AM/PM  
0 5  
:
4 0  
P M AM  
B PM  
Note  
Select “AM” or “PM”  
• Pressing only the OUTPUT button on  
the front panel DOES NOT switch the  
mode of the remote control. You  
MUST select the correct mode on the  
remote control.  
To exit the CLOCK SET  
screen.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Quick Use Guide  
VCR Playback  
DVD/CD Playback  
6
7
Before: Turn on the TV and set it to channel 3.  
• If channel 3 is already occupied for broadcasting, see “RF  
Output Channel” section.  
Before: Turn on the TV, amplifier and any other components which are con-  
nected to this unit. Make sure the TV and audio receiver (commercially avail-  
able) are set to the correct channel.  
DVD  
VCR  
VCR  
DVD-V  
CD  
4
OPEN/CLOSE  
/EJECT  
OPEN/CLOSE  
/EJECT  
POWER  
POWER  
Remote Control TV Screen  
SPEED  
AUDIO  
SPEED  
AUDIO  
1
3
2
1
3
2
4
1
5
1
OPEN/CLOSE  
/EJECT  
POWER  
1
4
7
2
5
8
3
6
9
1
4
7
2
5
8
3
6
9
PLAYB  
SKIP/CH.  
SKIP/CH.  
PLAY  
VCR/TV  
SLOW  
VCR/TV  
SLOW  
Remote Control TV Screen  
0
VCR  
+1 0  
DVD  
0
VCR  
+1 0  
DVD  
DISPLAY  
PAUSE  
DISPLAY  
PAUSE  
STOP  
4
PLAY  
OPEN/CLOSE  
/EJECT  
PLAY  
PLAY  
STOP  
STOP  
EJECT  
A
STOP  
STOP  
3
REC/OTR  
REC/OTR  
OPEN/CLOSE  
/EJECT  
5
2
3
4
Remote Control  
8
VCR mode  
VCR  
DVD mode  
Disc/Tape  
(BAulpthtaobnetical order)  
DVD-V  
CD  
MP3  
1
4
7
2
5
8
0
3
To select channel.  
The +10 button has no effect  
in VCR mode.  
6
To select chapter or title directly. To select track directly.  
9
+1 0  
To search forward/backward  
through a disc.  
To begin slow forward/reverse  
playback during the pause mode.  
To search forward/backward  
through a disc.  
To forward/backward a tape.  
To select an item  
on the VCR Menu.  
To advance to the next  
ENTER  
To move the cursor and  
determine its position.  
To move the cursor and  
determine its position.  
VCR Menu.  
To go back one step during  
OPEN/CLOSE  
/EJECT  
POWER  
SPEED  
AUDIO  
clock and timer setting.  
A-B  
To repeat between your  
chosen point A and B.  
To repeat between your  
chosen point A and B. (CD)  
1
4
7
2
5
8
3
6
9
ANGLE  
AUDIO  
To select camera angles on  
a disc.  
SKIP/CH.  
To select audio languages on To select STEREO,  
a disc.  
VCR/TV  
SLOW  
L-CH or R-CH. (CD)  
To clear the markers. (CD)  
To remove status No.  
CLEAR/  
C. RESET  
To clear the markers.  
To clear the numbers  
entered incorrectly.  
To exit the VCR Menu.  
To reset the tape counter.  
in program input.  
To clear the numbers  
0
VCR  
+1 0  
DVD  
DISPLAY  
PAUSE  
entered incorrectly.  
To display the current disc  
mode.  
To select the DVD output  
DISPLAY  
DVD  
To display the current disc  
mode.  
To display the current time,  
tape counter, and channel.  
To select the DVD output  
mode.  
PLAY  
mode.  
To activate the remote control To activate the remote control  
STOP  
in DVD mode.  
in DVD mode.  
MENU  
MODE  
REC/OTR  
MENU  
To call up the Menu  
on a disc.  
To call up the MP3 menu.  
(MP3)  
To call up the VCR Menu.  
ENTER  
To arrange the playing  
order or play randomly.  
To set black level on/off.  
SETUP TOP MENU  
RETURN  
OPEN/CLOSE  
/EJECT  
To open or close the disc  
tray.  
To open or close the disc  
tray.  
To eject the video cassette  
from the VCR.  
SEARCH  
MODE  
CLEAR/  
MODE  
V.SURR  
ANGLE  
C. RESET  
To pause tape playback or  
recording.  
To advance playback  
one frame at a time.  
PAUSE  
To pause disc playback.  
To advance playback  
one frame at a time.  
SUBTITLE  
T-SET  
To pause disc playback.  
REPEAT  
A-B  
To begin disc playback.  
To begin disc playback.  
To begin tape playback.  
To turn the unit on or off.  
To start a recording.  
PLAY  
POWER  
To turn the unit on or off.  
To turn the unit on or off.  
REC/OTR  
REPEAT  
To play a track or disc  
repeatedly. (CD)  
To play a track, group or disc  
To play a chapter or title  
repeatedly.  
repeatedly. (MP3)  
RETURN  
To return to the previous  
operation on the DVD setup  
menu.  
To return to the previous  
operation on the DVD setup  
menu.  
To search track.  
To search chapter, title or time.  
To search time. (CD)  
To rapidly return to  
a location of disc.  
SEARCH  
MODE  
To rapidly return to  
a location of disc.  
Search the markers.  
To call up the index or time  
search menu.  
Search the markers. (CD)  
SETUP  
To call up the DVD setup  
menu.  
To call up the DVD setup  
menu.  
SKIP/CH.  
SKIP/CH.  
To change channels.  
To adjust the tracking manually  
during playback.  
To skip chapters.  
To skip tracks.  
SLOW  
To view the tape  
in slow motion.  
SPEED  
STOP  
To select the recording speed.  
To stop playback.  
To stop playback.  
To stop playback or recording.  
SUBTITLE  
T-SET  
To put the VCR into standby  
mode for a timer recording.  
To select subtitles on a disc.  
To return to the top file of the  
highest hierarchy in the program  
and MP3 menu. (MP3)  
TOP MENU  
VCR  
To call up the Top Menu  
on a disc.  
To select the VCR output  
mode.  
To activate the remote control  
in VCR mode.  
VCR/TV  
V.SURR  
To select DVD position or  
TV position.  
To select CD/MP3 position  
or TV position.  
To select VCR position or  
TV position.  
To set virtual surround on/off. To set virtual surround on/off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0VMN04016 / H9604UD ★★★★★  
Printed in China  

Sennheiser Headphones RS 85 User Manual
Sharp All in One Printer AR 5516S User Manual
Snapper Snow Blower 1690497 User Manual
Sony Blender DHG HDD250 User Manual
Sony Indoor Furnishings SU 32FS2 User Manual
Sony Stereo System CHC TB10 User Manual
Sony Tablet Accessory PRSAAC1 User Manual
Spectra Toaster KT5211 User Manual
Stanley Black Decker Power Hammer MB656 User Manual
Sylvania Flat Panel Television LD200SL9 User Manual