Sylvania DVD VCR Combo DVC800CC User Manual

OWNER’S  
MANUAL  
DVD PLAYER with VIDEO CASSETTE RECORDER  
DVC800CC  
If you need additional assistance for set-up or operating  
after reading owner’s manual, please call  
-
-
TOLL FREE : 1 800 287-4871  
Please read before using this equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. Read Instructions - All the safety and operating instruc-  
proper grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge unit,  
size of grounding conductors, location of antenna-dis-  
charge unit, connection to grounding electrodes, and  
requirements for the grounding electrode. (Fig. A)  
tions should be read before the appliance is operated.  
2. Retain Instructions- The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings - All warnings on the appliance and in the  
operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions  
should be followed.  
FIGURE A  
ANTENNA  
LEAD  
WIRE  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
5. Cleaning - Unplug this video product from the wall outlet  
before cleaning. Do not use liquid cleaners or aerosol  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
cleaners. Use  
a
damp cloth for cleaning.  
EXCEPTION: A product that is meant for uninterrupted  
service and, that for some specific reason, such as the pos-  
sibility of the loss of an authorization code for a CATV  
converter, is not intended to be unplugged by the user for  
cleaning or any other purpose, may exclude the reference  
to unplugging the appliance in the cleaning description  
otherwise required in item 5.  
6. Attachments - Do not use attachments not recommended by  
the video product manufacturer as they may cause hazards.  
7. Water and Moisture- Do not use this video product near  
water, for example, near a bath tub, wash bowl, kitchen  
sink, or laundry tub, in a wet basement, or near a swim-  
ming pool, and the like.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC NATIONAL ELECTRICAL CODE  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
S2898A  
14. Lightning - For added protection for this video product  
during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable system. This  
will prevent damage to the video product due to lightning  
and power-line surges.  
15. Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into  
such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from  
touching such power lines or circuits as contact with them  
might be fatal.  
8. Accessories - Do not place this video product on  
an unstable cart, stand, tripod, bracket, or table.  
The video product may fall, causing serious  
injury to a child or adult, and serious damage to  
the appliance. Use only with a cart, stand, tripod,  
bracket, or table recommended by the manufacturer, or sold  
with the video product. Any mounting of the appliance  
should follow the manufacturer's instructions and should use  
a mounting accessory recommended by the manufacturer.  
An appliance and cart combination should be moved with  
care. Quick stops, excessive force, and uneven surfaces may  
cause the appliance and cart combination to overturn.  
16. Overloading - Do not overload wall outlets and extension  
cords as this can result in a risk of fire or electric shock.  
17. Object and Liquid Entry - Never push objects of any kind  
into this video product through any openings as they may  
touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid of  
any kind on the video product.  
18. Servicing - Do not attempt to service this video product  
yourself as opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all servicing to  
qualified service personnel.  
19. Damage Requiring Service - Unplug this video product  
from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
video product.  
9. Ventilation - Slots and openings in the cabinet are provid-  
ed for ventilation and to ensure reliable operation of the  
video product and to protect it from overheating, and these  
openings must not be blocked or covered. The openings  
should never be blocked by placing the video product on a  
bed, sofa, rug, or other similar surface. This video product  
should not be placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is provided or  
the manufacturer's instructions have been adhered to.  
10. Power Sources - This video product should be operated  
only from the type of power source indicated on the mark-  
ing label. If you are not sure of the type of power supply  
to your home, consult your appliance dealer or local power  
company. For products intended to operate from battery  
power, or other sources, refer to the operating instructions.  
11. Grounding or Polarization - This video product is  
equipped with a polarized alternating-current line plug (a  
plug having one blade wider than the other). This plug will  
fit into the power outlet only one way. This is a safety fea-  
ture. If you are unable to insert the plug fully into the out-  
let, try reversing the plug. If the plug should still fail to fit,  
contact your electrician to replace your obsolete outlet. Do  
not defeat the safety purpose of the polarized plug.  
12. Power Cord Protection - Power supply cords should be  
routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying par-  
ticular attention to cords at plugs, convenience receptacles,  
and the point where they exit from the appliance.  
c. If the video product has been exposed to rain or water.  
d. If the video product does not operate normally by follow-  
ing the operating instructions. Adjust only those controls  
that are covered by the operating instructions as an improp-  
er adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician  
to restore the video product to its normal operation.  
e. If the video product has been dropped or damaged in any way.  
f. When the video product exhibits a distinct change in per-  
formance this indicates a need for service.  
20. Replacement Parts - When replacement parts are required,  
be sure the service technician has used replacement parts  
specified by the manufacturer or have the same character-  
istics as the original part. Unauthorized substitutions may  
result in fire, electric shock or other hazards.  
21. Safety Check - Upon completion of any service or repairs  
to this video product, ask the service technician to perform  
safety checks to determine that the video product is in  
proper operating condition.  
13. Outdoor Antenna Grounding - If an outside antenna or  
cable system is connected to the video product, be sure the  
antenna or cable system is grounded so as to provide some  
protection against voltage surges and built-up static  
charges. Article 810 of the National Electrical Code,  
ANSI/NFPA No. 70, provides information with regard to  
22. Heat - This video product should be situated away from  
heat sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce heat.  
EN  
3
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A NOTE ABOUT RECYCLING  
This products packaging materials are recyclable and can be reused. Please dispose of all materials in  
accordance with your local recycling regulations.  
Batteries should never be thrown away or incinerated but disposed of in accordance with your local  
regulations concerning chemical wastes.  
The serial number of this product may be found on the back of the DVD/VCR player. This serial number is  
unique to your machine. You should record the number and other vital information here and retain this book as  
a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
ABOUT COPYRIGHT  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.  
This product incorporates copyright protection technology that is protected by claims of certain U.S. patents and  
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copy-  
right protection technology must be authorized by Macrovision Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
SUPPLIED ACCESSORIES  
Coaxial Cable  
Remote control  
(NA202CD)  
Two AA batteries  
A/V cables  
(approx. 3 feet (100 cm)  
long) (WPZ0102TM015)  
WPZ0901TM002  
SYMBOLS USED IN THIS MANUAL  
The following symbols below appear in some headings and notes in this manual, with the following meanings  
VCR  
: refers to playback of video cassette tapes.  
DVD  
: refers to playback of DVD video discs.  
CD  
: refers to playback of audio CDs.  
MP3  
: refers to playback of MP3 discs.  
EN  
4
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
PLAYING A DVD VIDEO OR AN AUDIO CD . . . . . . . . . . 23  
USING THE DVD MENUS . . . . . . . . . . . . . . . . . . . . . . . . . 23  
USING THE TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . 24  
PAUSING PLAYBACK OR DISPLAYING A STILL  
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3  
ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
SYMBOLS USED IN THIS MANUAL. . . . . . . . . . . . . . . . . . 4  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
PLAYABLE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
DISC TYPES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
OPERATING CONTROLS AND FUNCTIONS. . . . . . . . . . . 9  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
DISPLAYS DURING OPERATION . . . . . . . . . . . . . . . . . . . 12  
LOADING THE BATTERIES. . . . . . . . . . . . . . . . . . . . . . . . 12  
VIDEO/DVD SWITCHING . . . . . . . . . . . . . . . . . . . . . . . . . 13  
HOOKUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
DVD/VCR TO TV CONNECTION. . . . . . . . . . . . . . . . . . . . 14  
SETTING THE CH3/CH4 SWITCH . . . . . . . . . . . . . . . . . . . 14  
CONNECTING TO A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT  
JACK OR COMPONENT VIDEO IN JACKS. . . . . . . . . . . . 14  
CONNECTING TO AN AMPLIFIER EQUIPPED WITH  
PICTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
RESUMING PLAYBACK FROM THE POINT WHERE  
PLAYBACK STOPPED . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
STEPPING THROUGH FRAMES . . . . . . . . . . . . . . . . . . . . 24  
FAST FORWARD/REVERSE . . . . . . . . . . . . . . . . . . . . . . . . 25  
SLOW MOTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
STARTING FROM A DESIRED TRACK . . . . . . . . . . . . . . . 25  
PLAYING FROM A DESIRED TITLE OR A CHAPTER . . . 25  
STARTING FROM A DESIRED TIME COUNT. . . . . . . . . . 26  
MARKER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
RANDOM (Audio CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
PROGRAM (Audio CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
ZOOM PLAYBACK (enlargement on-screen) . . . . . . . . . . . . 28  
PLAYING AN MP3 DISC. . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
CHANGING THE ON-SCREEN DISPLAY DURING  
DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT  
MP3 DISC PLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
PLAYING A DESIRED TRACK FROM AN MP3 DISC . . . 30  
PLAYING AN MP3 DISC RANDOMLY . . . . . . . . . . . . . . . 30  
PLAYING AN MP3 DISC IN A PROGRAM. . . . . . . . . . . . . 30  
SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
CHANGING THE AUDIO LANGUAGE OR SOUND  
DECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
CONNECTING TO A DOLBY DIGITAL DECODER OR  
DTS DECODER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
CONNECTING TO AN ANALOG AUDIO. . . . . . . . . . . . . . 16  
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
AUTOMATIC CHANNEL SET UP. . . . . . . . . . . . . . . . . . . . 17  
TO CHANGE THE ON-SCREEN LANGUAGE. . . . . . . . . . 18  
CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
PLAYBACK FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
NORMAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . 19  
SEARCH FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
RECORDING FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . 20  
VIEWING AND RECORDING THE SAME PROGRAM. . . 20  
OTR (One Touch Recording). . . . . . . . . . . . . . . . . . . . . . . . . 20  
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
HINTS FOR TIMER RECORDING . . . . . . . . . . . . . . . . . . . 21  
SPECIAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
COPYING A VIDEO TAPE. . . . . . . . . . . . . . . . . . . . . . . . . . 22  
MTS (Multi-Channel Television Sound) SYSTEM . . . . . . . . 22  
AUTO REWIND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
REAL TIME TAPE COUNTER. . . . . . . . . . . . . . . . . . . . . . . 23  
MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
CHANGING THE SUBTITLE LANGUAGE . . . . . . . . . . . . 32  
CHANGING THE CAMERA ANGLE  
(Multi-Angle Pictures). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . . . . 33  
BLACK LEVEL SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . 33  
TruSurround SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
CHANGING THE SETUP ITEMS. . . . . . . . . . . . . . . . . . . . 34  
LANGUAGE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
DISPLAY SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
AUDIO SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . . . . 39  
HANDLING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . 40  
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
EN  
5
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Mode  
DVD  
¡Dolby Digital sound  
¡On-screen display  
This player can handle Dolby Digital surround sound  
with 5.1 channels when connected to a Dolby Digital  
decoder.  
Information about the current operation can be displayed  
on the TV screen, allowing you to confirm the currently  
active functions (such as program playback), on the TV  
screen using the remote control.  
¡Still/fast/slow/step playback  
Various playback modes are available including still pic- ¡DTS (Digital Theater System)  
tures, fast forward/reverse, slow motion and step frames.  
You can enjoy 5.1 channel surround system developed by  
the Digital Theater System co. which reproduces the orig-  
inal sound as truthfully as possible.  
¡Search  
¡Random playback for audio CD and MP3  
This player can shuffle the order of tracks to play them in  
random order.  
Chapter search: Search for a chapter designated by user is  
¡Program playback for audio CD and MP3  
You can program the order of tracks to play them in any  
desired order.  
possible.  
Title search: Search for a title designated by user is pos-  
sible.  
Track search: Search for a track designated by user is  
¡DVD menus in a desired language  
You can display DVD menus in the desired language, if  
available on the DVD.  
possible.  
Time search: Search for a time designated by user is  
possible.  
¡Screen saver/Auto power-off functions  
¡Repeat  
Chapter:  
The screen saver program starts when there is no input  
from the player for five minutes in the stop mode. When  
the screen saver program has been activated for 30 min-  
utes, the screen saver is automatically turned off.  
Repeated playback of the chapter of the  
disc being played is possible.  
Title:  
Repeated playback of the title of the disc  
being played is possible.  
¡Subtitles in a desired language  
You can select the desired language for the subtitle dis-  
play, if that language is available on the disc.  
Track:  
Repeated playback of the track of the disc  
being played is possible.  
Disc (audio CD): Repeated playback of the entire disc being  
¡Selecting a camera angle  
(MP3)  
played is possible.  
You can select the desired camera angle, if the disc con-  
tains sequences recorded from different angles.  
A-B:  
Playback of the section between A and B  
(designated by user) is possible.  
Album:  
Repeated playback of the album of the  
MP3 disc being played is possible.  
¡Choices for audio language and sound mode  
You can select the desired audio language and sound  
mode, if different languages and modes are available on  
the disc.  
¡Zoom  
A ×2 and ×4 magnified screen can be displayed.  
¡Marker  
¡Parental lock  
You can set the control level to limit playback of discs  
which may not be suitable for children.  
A part designated by user can be called back.  
¡Resume Play  
User can resume playback from the part at which the play  
was stopped even if the power is turned off.  
¡Automatic detection of discs  
This player automatically detects if the loaded disc is  
DVD, audio CD or MP3 on disc.  
¡SRS TruSurround  
You can enjoy a stereophonic virtual space on your exist-  
ing stereo system.  
¡Component Video Out Jacks  
Jacks located on the back of the DVD/VCR are used to  
send high-quality video to a TV via Component Video In  
Jacks.  
¡Playing an MP3 disc  
You can enjoy MP3 files which are recorded on CD-  
R/RW.  
¡Direct Search  
You can search for the desired title, chapter, and track with  
the Number buttons during playback or in stop mode.  
¡Dimmer  
Brightness of the display can be varied.  
This unit employs TruSurround system  
of SRS Labs, Inc. as virtual  
technology.  
¡Bit rate indication  
¡DRC (Dynamic range control)  
You can control the range of sound volume.  
TruSurround and the  
SRS Labs, Inc.  
symbol are trademarks of  
TruSurround technology is incorporated under license  
from SRS Labs, Inc.  
EN  
6
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Mode  
VCR  
¡S-VHS Quasi Playback (SQPB)  
(Allows you to view a tape recorded in S-VHS format.)  
¡Auto Repeat  
Hardware specifications  
¡Auto Head Cleaner  
¡4 Head HiFi Stereo  
¡2 Step Picture Search Operation  
¡Index Search  
¡Bilingual on-screen menu display selectable in  
English, French, or Spanish  
¡Time Search  
¡181 channel capability PLL frequency synthesiz-  
er tuner with direct station call  
(A cable converter box may be necessary to view scram-  
Recording  
¡1Year, 7 events (including Daily and WeeklyTimer  
Recording)  
bled cable channels.)  
Automatic functions  
¡OTR (One Touch Recording)  
¡Auto power on system  
Automatically turns the DVD/VCR on when you insert the  
cassette.  
¡Digital Auto Tracking (DTR)  
PRECAUTIONS  
AVOID THE HAZARDS OF  
INSTALLATION LOCATION  
ELECTRICAL SHOCK AND FIRE  
Do not handle the power cord with wet hands.  
Do not pull on the power cord when disconnecting it from  
AC wall outlet. Grasp it by the plug.  
For safety and optimum performance of your DVD/VCR:  
Install the DVD/VCR in a horizontal and stable position.  
Do not place anything directly on top of the DVD/VCR.  
Do not place the DVD/VCR directly on top of the TV.  
Shield it from direct sunlight and keep it away from  
sources of intense heat. Avoid dusty or humid places.  
Avoid places with insufficient ventilation for proper heat  
dissipation. Do not block the ventilation holes on the  
sides of the DVD/VCR. Avoid locations subject to strong  
vibration or strong magnetic fields.  
If, by accident, water is spilled on your DVD/VCR,  
unplug the power cord immediately and take the unit to  
our Authorized Service Center for servicing.  
Do not put your fingers or objects into the DVD/VCR  
cassette holder.  
MOISTURE CONDENSATION WARNING  
Moisture condensation may occur inside the unit when it is  
moved from a cold place to a warm place, or after heating a  
cold room or under conditions of high humidity. Do not use  
the DVD/VCR at least for 2 hours until its inside is dry.  
EN  
7
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT THE DISCS  
PLAYABLE DISCS  
DISC TYPES  
[
]
The following discs can be played back on this  
DVD/VCR.  
DVD  
Data on a DVD is divided into sections called "titles", and  
then into subsections called "chapters", each of which is  
given a title or chapter number. Playback conditions are  
preset on some DVD video discs, and these playback con-  
ditions take priority over user operations on this player. If  
a function you selected does not run as desired, refer to  
the manual accompanying the disc.  
Maximum  
Playback Time  
Disc Type  
Logo  
Contents Disc Size  
Approx. 4 h  
(single-sided)  
12 cm  
Approx. 8 h  
(double-sided)  
Sound  
and  
Pictures  
DVD  
Video  
Approx. 80 min  
(single-sided)  
8 cm  
Example  
Approx. 160 min  
(double-sided)  
Title 1  
Title 2  
12 cm  
74 min  
20 min  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2  
Audio  
CD  
Sound  
8 cm  
(singles)  
This player conforms to the NTSC color system. You can-  
not play discs recorded in other color systems such as  
PAL or SECAM.  
¡Some discs include region codes as shown below.  
[
]
AUDIO CD  
Data on an audio CD is divided into sections called  
tracks, each of which is given a track number.  
¡The number inside the symbol refers to a region of the  
world, and a disc encoded in a specific region format  
can only be played back on DVD/VCR with the same  
region code.  
Example  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
Track 6  
The following discs cannot be played back on this  
DVD/VCR.  
¡
DVD with region codes other than 1 or ALL.  
¡
DVD-ROM  
¡
[
]
DVD-RAM (Never attempt to play back,  
otherwise a malfunction may result.)  
CD-ROM  
MP3  
Data on an MP3 is divided into sections called "albums",  
and then into subsections called "tracks", each of which is  
given an album or track number.  
¡
¡
¡
¡
¡
VSD  
CDV (Only plays back the audio part.)  
CD-G (Only plays back the sound.)  
CD-R/CD-RW  
(Only plays back discs on which audio CD or  
MP3 are recorded.)  
Example  
Album 1  
Album 2  
Track 1  
Track 2  
Track 3  
Track 4  
Track 1  
Track 2  
¡
CD-I  
(Never attempt to play back, otherwise a mal-  
function may result.)  
¡
¡
SACD  
Photo CD  
(Never attempt to play back, otherwise a mal-  
function may result.)  
¡
Video CD  
(Never attempt to play back, otherwise a mal-  
function may result.)  
Any other discs without compatibility indications  
EN  
8
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING CONTROLS AND FUNCTIONS  
Notes  
¡To use the remote control to operate the DVD/VCR and its features, press the DVD button on the remote con-  
trol before pressing other DVD buttons. Verify that the green DVD OUTPUT Light is on.  
¡To use the remote control to operate the VCR and its features, press the VCR button on the remote control  
before pressing other VCR buttons. Verify that the green VCR OUTPUT Light is on.  
FRONT PANEL  
1
2
3
4
5
6
7 8 9  
POWER  
VIDEO  
L
CHANNEL  
DVD OPERATION  
OUTPUT  
VCR OPERATION  
TIMER  
SET  
AUDIO  
R
VCR/TV  
CST.IN  
OPEN/CLOSE  
STOP  
SKIP/REV PLAY  
FWD/SKIP  
STOP/EJECT REW  
PLAY  
F.FWD REC/OTR  
25  
23 21  
22  
19 17 15 13 11  
18 16 14 12 10  
26  
24  
20  
1. Disc loading tray  
REMOTE CONTROL  
2. DVD OUTPUT Light (Green) [page 13]  
This light appears when the DVD output mode is  
selected. You can only watch DVDs when the green  
DVD OUTPUT Light is on. To make the green DVD  
OUTPUT light come on, press the DVD button on  
the remote control or the OUTPUT button on the  
front panel.  
56  
54  
27  
POWER SPEED AUDIO  
28  
1
4
7
2
5
8
0
3
6
55  
53  
SKIP/CH.  
3. VCR OUTPUT Light (Green) [page 13]  
This light appears when the VCR output mode is  
selected. You can only watch tapes when the green  
VCR OUTPUT light is on. To make the green VCR  
OUTPUT light come on, the VCR button on the  
remote control or the OUTPUT button on the front  
panel.  
29  
VCR/TV  
SLOW  
9
+100  
+
10  
DISPLAY DVD  
VCR  
PAUSE  
52  
50  
30  
32  
34  
51  
49  
31  
33  
PLAY  
4. CASSETTE COMPARTMENT  
5. REC/OTR Light [page 20]  
STOP  
Lights up during recording.  
RECORD  
MENU  
6. TIMER SET Light [page 21]  
48  
46  
This light glows when the DVD/VCR is in standby  
mode or off for a timer recording or during a One-  
Touch Recording. It flashes if the TIMER SET but-  
ton is pressed for a timer recording, but there is no  
tape in the DVD/VCR. It flashes when all timer  
recordings or One-Touch Recordings are finished.  
7. POWER Button [page 17]  
35  
37  
39  
ENTER  
47  
36  
38  
SETUP  
TITLE  
RETURN  
SEARCH  
MODE  
CLEAR/  
MODE ZOOM  
C.RESET  
45  
43  
44  
42  
SUBTITLE ANGLE REPEAT  
A
B
40  
Press to turn the power on and off.  
41  
8. POWER Light  
Lights up when the power is on.  
9. VIDEO In Jack  
Connect a video cable coming from the video out  
jack of a camcorder, another VCR, or a video source  
(laser disc player, camcorder, etc.) here.  
10. AUDIO In Jacks  
Connect audio cables coming from the audio out jacks  
of a camcorder, another VCR, or an audio source here.  
11. TIMER SET Button [page 21]  
Press to put the DVD/VCR into standby mode for a  
timer recording.  
12. CASSETTE IN Light [page 19]  
Lights up when a cassette is in the DVD/VCR.  
EN  
9 –  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. VCR/TV Light [page 17]  
28. POWER Button  
Lights up when the DVD/VCR is in the VCR posi-  
tion, and goes off when it is in the TV position.  
14. CHANNEL Buttons [page 17]  
Press to turn the power on and off.  
29. Number Buttons  
GDVD mode [page 25]  
In VCR mode, press to change TV channels on the  
DVD/VCR; press to adjust the tracking during nor-  
mal or slow motion playback; press to remove verti-  
cal jitter in a Still picture.  
Press to directly select a Track (Audio CD) for  
playback.  
Press to program Tracks (Audio CD) for playback.  
GVCR mode [page 25]  
Press to select TV channels on the DVD/VCR.  
To select channels, enter channel numbers as a  
two-digit number for the quickest results. For  
example, to select channel 6, press 0 then 6.  
15. REC/OTR Button (VCR) [page 20]  
Press once to start a recording. Press repeatedly to  
start a One-Touch Recording.  
16. F.FWD Button (VCR) [page 17]  
Press to rapidly advance the tape, or view the picture  
rapidly in forward during playback. (Forward  
Search). When setting program (For example:setting  
clock or timer program), press to determine your  
selection and proceed to the next step you want to  
input. Press to determine the setting modes from the  
on screen menu. Press to add or delete channel num-  
bers during channel preset.  
+100 button:  
If you want to select channels 100 and above, press  
this button first, then press the last two digits. For  
example, to select channel 125, press +100 button  
first, then press 2 and 5.  
30. DISPLAY Button  
GDVD mode [page 13]  
Press to access or remove the display screen during  
DVD or Audio CD playback.  
17. PLAY Button (VCR) [page 17]  
Press to begin playback. Press to enter digits when  
setting program (For example: setting clock or timer  
program). Press to select the setting modes from the  
on screen menu.  
GVCR mode [page 13]  
Press to access or remove the VCRs on-screen sta-  
tus display.  
31. DVD Button [page 13]  
18. REW Button (VCR) [page 18]  
Press to select DVD mode for the remote control.  
GYou can switch the OUTPUT mode either by  
pressing the OUTPUT button on the front panel, or  
by pressing the DVD or the VCR button on the  
remote control. However, if you press the OUTPUT  
Button on the front panel first, you need to re-  
select the corresponding mode by pressing the  
DVD or the VCR button on the remote control.  
32. h Button  
Press to rewind the tape, or to view the picture rapid-  
ly in reverse during the playback mode (Rewind  
Search). Press to cancel a setting of timer program.  
Press to correct digits when setting program (For  
example: setting clock or timer program). Press to  
add or delete channel numbers during channel preset.  
19. STOP/EJECT Button (VCR) [page 21  
]
GEJECT Button  
Press to remove the tape from the VCR.  
GSTOP Button  
GDVD mode  
Press to view the DVD picture in fast reverse  
motion or to reverse playback of an Audio CD.  
GVCR mode  
Press to stop the tape motion. Press to enter digits  
when setting program (For example:setting clock  
or timer program). Press to select the setting  
modes from the on screen menu.  
Press to rewind the tape, or to view the picture  
rapidly in reverse during the playback mode  
(Rewind Search). Press to cancel a setting of  
timer program. Press to correct digits when setting  
program (For example: setting clock or timer pro-  
gram). Press to add or delete channel numbers  
during channel preset.  
20. OUTPUT Button [page 13]  
Press to select DVD mode or VCR mode.  
GYou can switch the output mode either by pressing  
the OUTPUT button on the front panel, or by  
pressing the DVD or the VCR button on the  
remote control. However, if you press the OUT-  
PUT Button on the front panel first, you need to  
re-select the corresponding mode by pressing  
the DVD or the VCR button on the remote con-  
trol.  
33. STOP Button  
Press to stop the tape motion. Press to enter digits  
when setting program (For example: setting clock or  
timer program). Press to select the setting modes  
from the on screen menu.  
34. RECORD Button  
21. FWD/SKIP Button (DVD) [page 25]  
Plays back from the beginning of the next chapter or  
track. Hold down to fast forward playback.  
22. PLAY Button (DVD) [page 23]  
Press to begin playback.  
23. SKIP/REV Button (DVD) [page 25]  
Plays back from the beginning of the current chapter  
or track. Hold down to fast reverse playback.  
24. STOP Button (DVD) [page 23]  
Stops operation of the disc.  
Press once to start a recording. Or, press repeatedly  
to start a One-Touch Recording.  
35. MENU Button  
GDVD mode [page 23]  
Press to display the menu of the Disc.  
GVCR mode [page 17]  
Press to access the VCR menu.  
36. TITLE Button  
37. SETUP Button [page 34]  
Press to enter the setup mode.  
25. OPEN/CLOSE Button [page 23]  
Press to insert discs into or remove them from the tray.  
26. Display, Remote Sensor Window  
27. SPEED Button [page 20]  
38. ZOOM Button [page 28]  
Enlarges part of a DVD-reproduced image.  
Press to select the VCRs recording speed (SP or SLP)  
EN  
10  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39. MODE Button [pages 26]  
Activates program playback or random playback  
mode when playing CDs or MP3. Sets Black level or  
SRS TruSurround.  
40. SUBTITLE Button [page 32]  
Press to select the desired subtitle language.  
41. ANGLE Button [page 32]  
Press to change the camera angle to see the sequence  
being played back from a different angle.  
42. REPEAT Button [page 27]  
Repeats playback of the current disc, title, chapter or  
track.  
51. VCR Button [page 13]  
Press to select VCR mode for the remote control.  
GYou can switch the OUTPUT mode either by  
pressing the OUTPUT button on the front panel, or  
by pressing the DVD or the VCR button on the  
remote control. However, if you press the OUTPUT  
Button on the front panel first, you need to re-  
select the corresponding mode by pressing the  
DVD or the VCR button on the remote control.  
52. PAUSE Button  
GDVD mode [page 24]  
Press to pause Disc playback. Press repeatedly to  
advance the DVD picture step by step (or one  
frame at a time).  
43. A-B REPEAT Button [page 27]  
Repeats playback of a selected section.  
44. SEARCH MODE Button  
GDVD mode [page 25]  
GVCR mode [page 19]  
While recording, press to temporarily stop the  
recording (pause). Press a second time to resume  
normal recording. You can not pause a One-Touch  
Recording. Or, press during tape playback to  
freeze the picture. Press to advance the picture one  
frame at a time during still mode.  
Press to access or remove the Search display,  
which allows you to go directly to a specific  
Title/Chapter/Track/Time.  
GVCR mode [page 19]  
Press to perform a Time Search or an Index  
Search.  
53. SLOW Button [page 19]  
45. CLEAR/C.RESET Button  
During tape playback, press to view the video tape in  
slow motion. Press again to resume normal playback.  
This button does not affect DVD playback.  
54. VCR/TV Button [page 21]  
GDVD mode [page 26]  
Press to reset the setting.  
GVCR mode [page 18]  
Press to reset the counter. Press to exit from the  
MENU screen.  
Use to select VCR or TV position. If the VCR/TV  
light appears on the front of the DVD/VCR, it is in  
VCR position (in either VCR or DVD mode). If the  
VCR/TV light doesnt appear on the front of the  
DVD/VCR, it is in TV position.  
46. RETURN Button  
Returns to the previous operation.  
47. Arrow Buttons  
Use when making settings while watching the  
display on a TV screen.  
GVCR Position  
When the green VCR OUTPUT light appears on the  
front of the DVD/VCR, use the VCR to watch a tape,  
watch a TV program while recording it, or watch a  
TV broadcast using the CHANNEL or the Number  
buttons to change channels at the DVD/VCR.  
When the green DVD OUTPUT light appears on  
the front of the DVD/VCR, use the DVD/VCR to  
view Disc playback or menus.  
48. ENTER Button  
Press to accept a setting.  
49. g Button  
GDVD mode  
Press to fast forward the Disc. Press the Pause but-  
ton, then press the FWD button to begin slow  
motion playback. Press the FWD button repeated-  
ly to change the forward speed of slow motion.  
GVCR mode  
GTV Position  
Use to watch TV (changing channels at the TV) or  
watch one program while recording another.  
Press to rapidly advance the tape, or view the pic-  
ture rapidly in forward during playback (Forward 55. SKIP/CH. Buttons  
Search). When setting program (For example: set-  
ting clock or timer program), press to determine  
your selection and proceed to the next step you  
want to input. Press to determine the setting  
GDVD mode  
Press to skip Chapters or Tracks.  
GVCR mode  
Press to change TV channels on the DVD/VCR.  
modes from the on screen menu. Press to add or 56. AUDIO Button [page 31]  
delete channel numbers during channel preset.  
Press to select a desired audio language or sound mode.  
50. PLAY Button  
GDVD mode  
Press to begin playback.  
GVCR mode  
Press to begin playback. Press to enter digits when  
setting program (For example: setting clock or  
timer program). Press to select the setting modes  
from the on screen menu.  
EN  
11  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REAR VIEW  
57  
58 59  
60  
DVD/VCR  
OUT  
COMPONENT  
VIDEO OUT  
IN  
ANT - IN  
Y
L
DVD/VCR  
AUDIO OUT  
AUDO  
R
DIGITAL AUDIO OUT  
PCM / BITSTREAM  
COAXIAL  
S-VIDEO  
OUT  
L
Cb  
Cr  
ANT - OUT  
CH3 CH4  
R
VIDEO  
67 65  
66  
64  
62  
63  
61  
57. AC Power Cord  
63. DVD/VCR VIDEO OUT Jack  
Connect the yellow video cable (supplied) here  
and to the TVs Video In jack.  
Connect to a standard AC outlet to supply power  
to the DVD/VCR.  
58. AUDIO IN Jacks  
64. VIDEO IN Jack  
Connect audio cables coming from the audio out  
jacks of a camcorder, another VCR, or an audio  
source here.  
Connect a cable coming from the video out jack  
of a camcorder, another VCR, or an audio-visual  
source (laser disc player, video disc player, etc.)  
here.  
59. DVD/VCR AUDIO OUT Jacks  
Connect the supplied audio cables here and to the 65. CH3/CH4 Switch  
Audio In jacks of a television or other audio  
equipment.  
Set to channel 3 or 4 to use your TV with your  
DVD/VCR.  
60. COMPONENT VIDEO OUT Jacks  
Connect optional component video cables here  
and to the component Video In jacks of a televi-  
sion.  
66. ANT-IN (Antenna In) Jack  
Connect your antenna, Cable Box, or Direct  
Broadcast System.  
67. ANT-OUT (Antenna Out) Jack  
Use the supplied RF coaxial cable to connect this  
jack to the ANTENNA IN Jack on your TV.  
61. COAXIAL Jack  
Connect an optional coaxial digital audio cable  
here and to the Coaxial Digital Audio In jack of a  
decoder or audio receiver.  
¡The S-VIDEO OUT jack, COAXIAL jack, OPTI-  
CAL jack, and COMPONENT VIDEO OUT jacks  
are only useful in DVD mode.  
62. S-VIDEO OUT Jack  
Connect an optional S-Video cable here and to  
the S-Video In jack of a television.  
DISPLAY  
Lit when the  
Lights up when a DVD  
is inserted into the tray.  
Lit when the  
A-B repeat function  
is on.  
repeat function is on.  
Lights up when a  
CD is inserted on  
the tray.  
Displays how long the current title or track has been  
playing. When a chapter or track is switched, the  
number of the new title, chapter or track is displayed.  
Lit when the inserted  
disc is being played back.  
Lights up when the  
inserted disc comes  
to a pause.  
DISPLAYS DURING  
OPERATION  
LOADING THE BATTERIES  
1. Open the battery compartment  
cover.  
Power on  
2. Insert two AA batteries, with each  
one oriented correctly.  
No disc inserted  
Tray open  
3. Close the cover.  
Tray closed  
Loading the Disc  
Power off  
Notes  
¡Do not mix alkaline and manganese batteries.  
¡Do not mix old and new batteries.  
EN  
12  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR/DVD SWITCHING  
Since this product comprises VCR and DVD players, it is necessary to select the correct  
output mode.  
SWITCHING TO VCR MODE  
SWITCHING TO DVD MODE  
Press the VCR button on the remote control.  
(Verify that the VCR OUTPUT Light is lit.)  
Press the DVD button on the remote control.  
(Verify that the DVD OUTPUT Light is lit.)  
Notes  
¡Pressing only the OUTPUT Button on the front panel does not switch the mode of the remote control. You  
always need to select the correct mode on the remote control too.  
POWER  
VIDEO  
POWER SPEED AUDIO  
DVD OPERATION  
OUTPUT  
VCR OPERATION  
STOP/EJECT REW  
CHANNEL  
L
TIMER  
SET  
AUDIO  
R
VCR/TV  
CST.IN  
OPEN/CLOSE  
STOP  
SKIP/REV PLAY  
FWD/SKIP  
PLAY  
F.FWD REC/OTR  
1
4
7
2
5
8
0
3
6
SKIP/CH.  
VCR/TV  
SLOW  
9
+100  
DVD OUTPUT Light  
DVD button  
VCR OUTPUT Light  
+
10  
DISPLAY DVD  
VCR  
PAUSE  
VCR button  
PLAY  
VD OPERATION  
OUTPUT  
VCR OPERATIO  
STOP  
RECORD  
MENU  
ENTER  
LAY  
FWD/SKIP  
STOP/EJECT REW  
SETUP  
TITLE  
RETURN  
SEARCH  
MODE  
CLEAR/  
MODE ZOOM  
C.RESET  
OUTPUT button  
SUBTITLE ANGLE REPEAT  
A
B
EN  
13  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOKUPS  
SETTING THE CH3/CH4  
SWITCH  
DVD/VCR TO TV CONNECTION  
1. Disconnect the AC power cord of the TV from the If your TV does not have A/V terminals:  
AC outlet.  
When the DVD/VCR is in the VCR Playback mode or  
when the DVD/VCR is in the VCR mode, your TV will  
2. Disconnect the antenna or cable from the TV.  
3. Connect the antenna or cable to the ANT-IN jack of receive signals from the DVD/VCR on either channel  
the DVD/VCR.  
4. Connect the DVD/VCR to the TV using the coaxial the selector switch to CH3 or CH4 (which is located in  
cable. the back of your DVD/VCR), whichever is not used for  
3 or channel 4. To use the DVD/VCR with your TV, set  
5. Plug the AC power cords of the DVD/VCR and TV normal broadcasts in your area. Then set your TV to  
into the AC outlets.  
the same channel.  
[VHF/UHF  
[Back of the DVD/VCR]  
[Indoor antenna]  
combination antenna]  
[Back of the  
ANT - IN  
UHF/VHF combination TV]  
Coaxial cable  
(supplied)  
OR  
OR  
ANT IN  
-
NT - OUT  
CH4  
CH3  
CH3 CH4  
UHF/VHF  
[Cable box or satellite box]  
ANT - OUT  
CH3 CH4  
IN  
OUT  
From Cable or  
Satellite Company  
[Back of the DVD/VCR]  
Note to CATV system installer  
This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that pro-  
vides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected  
to the grounding system of the building, as close to the point of cable entry as practical.  
CONNECTING TO A TV  
DVD/VCR  
COMPONENT  
OUT  
IN  
VIDEO OUT  
ANT - IN  
Antenna/Cable signal  
Y
L
AUDO  
R
AUDIO OUT  
DIGITAL AUDIO OUT  
S-VIDEO  
OUT  
L
Cb  
Cr  
PCM  
/
BITSTREAM  
COAXIAL  
ANT - OUT  
A/V-compatible or  
wide screen TV  
R
VIDEO  
CH3 CH4  
To ANT. IN  
of TV  
[Fig. 1]  
To VIDEO INPUT jack  
To Right (red) and Left (white)  
AUDIO INPUT jacks  
To VIDEO OUT jack  
AUDIO OUT jacks  
Notes  
¡Connect the DVD/VCR directly to a TV. If the A/V cables are connected to a VCR, pictures may be  
distorted due to the copy protection system.  
CONNECTING TO A TV THAT HAS AN  
S-VIDEO INPUT JACK OR COMPONENT VIDEO IN JACKS  
FOR TVs WITH S-VIDEO INPUT JACK  
Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy higher quality pic-  
tures.  
The S-Video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in order to  
use the VCR features or view TV channels on the DVD/VCR, you still need to either connect the RF coaxial cable  
between the ANT-OUT jack of the DVD/VCR and the TVs Antenna In jack, or connect the yellow video cable as  
described earlier (Fig.1). To connect the supplied RF coaxial cable, see DVD/VCR TO TV CONNECTION”  
above.  
DVD/VCR  
COMPONENT  
OUT  
IN  
VIDEO OUT  
ANT - IN  
Y
L
AUDO  
R
DVD/VCR  
AUDIO OUT  
DIGITAL AUDIO OUT  
PCM / BITSTREAM  
COAXIAL  
S-VIDEO  
OUT  
L
Cb  
Cr  
A/V-compatible or  
wide screen TV  
ANT - OUT  
R
VIDEO  
CH3 CH4  
To Right (red) and Left (white)  
AUDIO INPUT jacks  
AUDIO OUT jacks  
To S-VIDEO OUT jack  
[Fig. 2]  
To S-VIDEO INPUT jack  
EN  
14  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR TVs WITH  
COMPONENT VIDEO IN JACKS  
Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher qual-  
ity pictures.  
The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in  
order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coax-  
ial cable between the ANT-OUT jack of the DVD/VCR and the TVs Antenna In jack, or connect the yellow video  
cable as described earlier (Fig. 1). To connect the supplied RF coaxial cable, see DVD/VCR TO TV CONNEC-  
TIONon page 14.  
To COMPONENT VIDEO  
INPUT jacks  
A/V-compatible  
To COMPONENT VIDEO  
OUT jacks  
or  
To Right (red) and Left (white)  
AUDIO INPUT jacks  
wide screen TV  
To Right (red) and Left (white)  
AUDIO OUTPUT jacks  
DVD/VCR  
OUT  
COMPONENT  
VIDEO OUT  
IN  
ANT - IN  
Y
L
AUDO  
R
DVD/VCR  
AUDIO OUT  
DIGITAL AUDIO OUT  
S-IO  
L
Cb  
Cr  
PCM  
/
BITSTREAM  
COAXIAL  
ANT - OUT  
CH3 CH4  
R
VIDEO  
[Fig. 3]  
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL  
INPUT JACKS SUCH AS MD DECK OR DAT DECK  
Use an audio coaxial digital cables (not included) for the audio connections.  
Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.  
DVD/VCR  
COMPONENT  
OUT  
IN  
VIDEO OUT  
ANT - IN  
Y
L
AUDO  
R
DVD/VCR  
AUDIO OUT  
DIGITAL AUDIO OUT  
PCM / BITSTREAM  
COAXIAL  
S-VIDEO  
OUT  
L
Cb  
Cr  
ANT - OUT  
R
VIDEO  
CH3 CH4  
Amplifier equipped with digital  
input jacks, MD deck,  
DAT deck, etc.  
To COAXIAL DIGITAL  
AUDIO OUT jack  
[Fig. 4]  
To COAXIAL DIGITAL  
AUDIO INPUT jack  
Notes  
¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital  
sound by an MD or DAT deck.  
¡Be sure to turn off the power to all components in the system before connecting another component.  
¡Refer to the Owners Manuals for the components to be connected to the DVD/VCR.  
¡Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD disc using incorrect set-  
tings may generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital and  
DTS to on)  
EN  
15  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER  
If using this DVD/VCR to play a DVD disc in 5.1 channel Dolby Digital surround, or DTS surround formats,  
the DVD/VCR outputs a Dolby Digital, or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack.  
By hooking the DVD/VCR up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic  
ambience with powerful and high-quality surround sound of a professional standard such as can be heard in  
movie theaters.  
Use an audio coaxial digital cables (not included) for the audio connections.  
DVD/VCR  
COMPONENT  
OUT  
IN  
VIDEO OUT  
ANT - IN  
Y
L
AUDO  
R
DVD/VCR  
AUDIO OUT  
DIGITAL AUDIO OUT  
S-VIDEO  
OUT  
L
Cb  
Cr  
PCM  
/
BITSTREAM  
COAXIAL  
ANT - OUT  
R
VIDEO  
CH3 CH4  
Center speaker  
To COAXIAL DIGITAL  
AUDIO OUT jack  
Front speaker  
(right)  
Front speaker  
(left)  
Dolby Digital,  
DTS decoder  
To COAXIAL DIGITAL  
AUDIO INPUT jack  
Subwoofer  
Surround  
speaker  
(left)  
Surround  
speaker  
(right)  
[Fig. 5]  
Notes  
¡Be sure to turn off the power to all components in the system before connecting another component.  
¡Refer to the Owners Manuals for the components to be connected to the DVD/VCR.  
¡If the output is Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio  
output in the setup mode.  
¡If the output is DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode.  
¡Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out-  
put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also  
damage the speakers.  
Manufactured under license from Dolby  
Laboratories. Dolbyand the double-D symbol are  
trademarks of Dolby Laboratories.  
DTSand DTS Digital Outare trademarks of  
Digital Theater Systems Inc.  
CONNECTING TO AN ANALOG AUDIO  
DVD/VCR  
OUT  
COMPONENT  
VIDEO OUT  
IN  
ANT - IN  
Y
L
AUDO  
R
DVD/VCR  
AUDIO OUT  
DIGITAL AUDIO OUT  
PCM / BITSTREAM  
COAXIAL  
S-VIDEO  
OUT  
L
Cb  
Cr  
ANT - OUT  
CH3 CH4  
R
VIDEO  
Stereo system  
To Right (red) and Left (white)  
AUDIO OUT jacks  
[Fig. 6]  
To ANALOG AUDIO INPUT jacks  
Notes  
¡Be sure to turn off the power to all components in the system before connecting another component.  
¡Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR.  
EN  
16  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
AUTOMATIC CHANNEL SET UP  
5 Begin channel preset by pressing the F.FWD  
button once. The tuner scans and memorizes  
all active channels in your area.  
VCR  
The DVD/VCR can automatically program the tuner to  
scanonlythe channels which are available in your area.  
¡The DVD/VCR distinguishes  
CH 01  
¡Channel memory programming is NOT needed  
when the DVD/VCR is connected to a cable box or  
a satellite box as in "DVD/VCR TO TV CONNEC-  
TION" on page 14. In this case, set the CH3/CH4  
Switch (which is located on the back of your VCR)  
to either CH3 or CH4, whichever is not used for nor-  
mal broadcasts in your area. Then set your TV to the  
same channel. The channel you want to record or  
view will be selected from the cable or the satellite  
box.  
between standard TV channels  
and cable channels.  
AUTO SET UP  
6
After scanning, the tuner stops on the lowest  
memorized channel.TheTV screen returns to  
TV mode.  
¡If AUTO SET UPappears on the TV screen again,  
check the cable connections. Press the F.FWD but-  
ton once again and the DVD/VCR will begin preset  
again.  
¡Follow the steps below once. Repeat only if there is  
a power failure or if the DVD/VCR is unplugged for  
more than 30 seconds. (In these cases, the pro-  
grammed channels are erased.)  
¡You must follow the steps below before attempting to  
play or record a video tape.  
TO SELECT A DESIRED CHANNEL  
You can select the desired channel by using the  
CHANNEL(o/p) buttons or by directly pressing the  
Number buttons on the remote control.  
1
2
You need to connect the antenna or cable to  
the DVD/VCR first. Then, connect the DVD  
/VCR power plug to a standard AC outlet.  
Note for using the Number buttons:  
¡When selecting cable channels which are higher than  
99, press [+100] first, then press the last two digits.  
¡You must precede single-digit channel numbers with  
a zero (For example: 02, 03, 04 and so on).  
Turn on the TV and set the TV to channel 3 or  
4.  
¡Now set the CH3/CH4 switch on the back of the  
DVD/VCR to match the channel selected on the TV.  
TO PRESET THE CHANNELS AGAIN  
3
4
Turn on the DVD/VCR by pressing the  
POWER button. Both the POWER and the  
VCR/TV light will come on.  
1
Press the MENU button until the main menu  
appears. (If you have already set the clock,  
you only have to press it once. If not, you  
have to press it twice).  
Select the On Screen Language (ENGLISH,  
FRANCAISor ESPAÑOL) by pressing the  
PLAY or the STOP button.  
Then, press the F.FWD but-  
ton.  
2
3
Select CHANNEL SET UPby pressing the  
PLAY or the STOP button. Then, press the  
F.FWD button.  
Select TVor CATVby pressing the PLAY  
or the STOP button. Then, press the F.FWD  
button.  
¡After scanning, the tuner stops on the lowest memo-  
rized channel.  
EN  
17  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO ADD/DELETE CHANNELS  
CLOCK SET UP  
When scanning, some channels may be skipped due to  
a weak signal. In such cases, you can add the channels  
to the DVD/VCR memory manually.  
VCR  
Set the clock accurately for proper automatic timer  
recording. We suggest that you use a TV or radio sta-  
tion as your time source.  
1
Press the MENU button until the main menu  
appears. (If you have already set the clock,  
you only have to press it once. If not you  
1
Press the MENU button twice to call up the  
main menu. (If you have already set the  
clock, you only have to press it once).  
have to press it twice).  
- MENU -  
TIMER PROGRAMMING  
[OFF]  
AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
LANGUAGE SELECT  
AUDIO OUT  
[ON]  
TV STEREO  
SAP  
¡If the clock is not set, the CLOCK SET menu  
appears first. In this case, follow step [3].  
2
3
Select "CHANNEL SET UP" by pressing the  
PLAY or the STOP button. Then, press the  
F.FWD button.  
2
3
Select "CLOCK SET" by pressing the PLAY  
or the STOP button. Then, press the F.FWD  
button  
Select "MANUAL SET UP" by pressing the  
PLAY or the STOP button. Then, press the  
F.FWD button.  
Set the clock.  
1) Set the month  
Press the PLAY button or the STOP button repeatedly.  
Then, press the F.FWD button.  
4
5
Enter the desired channel number by press-  
ing the PLAY or the STOP button.  
2) Set the day  
Add or Delete it from memory by pressing the  
F.FWD or the REW button so that "ADD" or  
"DELETE" flashes on the TV screen accord-  
ingly.  
Press the PLAY button or STOP repeatedly.  
Then, press the F.FWD button.  
3) Set the year  
Press the PLAY button or the STOP button repeatedly.  
Then, press the F.FWD button.  
The day of the week will appear automatically.  
6
Exit the Preset mode by pressing the  
CLEAR/C.RESET button.  
4) Set the hour  
TO CHANGE THE ON-SCREEN  
LANGUAGE  
Press the PLAY button or the STOP button repeatedly.  
Then, press the F.FWD button.  
VCR  
5) Set the minute  
1
2
3
Press the MENU button twice to call up the  
main menu. (If you have already set the  
clock, you only have to press it once).  
Press the PLAY button or the STOP button repeatedly.  
Then, press the F.FWD button.  
Select "LANGUAGE SELECT" by pressing  
the PLAY or the STOP button.Then, press the  
F.FWD button.  
6) Set AM or PM  
CLOCK SET  
MONTH DAY  
YEAR  
Press the PLAY button or the  
STOP button repeatedly.  
03 18 MON 2002  
/
HOUR MINUTE AM/PM  
05  
:
40  
PM AM  
PM  
Select "ENGLISH", "FRANCAIS" or  
"ESPAÑOL" by pressing the PLAY or the  
STOP button. Then, press the  
¡To go back one step, press the REW button.  
CLEAR/C.RESET button.  
4
Start the clock by pressing the  
CLEAR/C.RESET or the F.FWD button.  
EN  
18  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK FUNCTION  
NORMAL PLAYBACK  
2
Select "AUTO REPEAT" by pressing the  
PLAY or the STOP button.  
VCR  
3
Begin auto repeat playback by pressing the  
F.FWD button so that [ON] appears next to  
"AUTO REPEAT".  
1
Insert a prerecorded tape. The DVD/VCR will  
turn on, and the VCR/TV Light  
and the CST IN Light comes  
on.  
¡If the on-screen menu still remains, press the  
CLEAR/C.RESET button to exit the menu.  
¡If the safety tab has been removed, the DVD/VCR  
will start playback automatically.  
¡
To cancel the Auto repeat mode, press the F.FWD button at  
step [3] so that [OFF] appears next to "AUTO REPEAT".  
SEARCH FUNCTIONS  
2
Turn on theTV and set theTV to channel 3 or 4.  
¡Now set the CH3/CH4 switch on the back of the  
VCR  
DVD/VCR to match the channel selected on the TV.  
PICTURE SEARCH  
3 Begin playback by pressing the PLAY button.  
If you want to skip or repeat a scene during playback,  
press the F.FWD or the REW button.  
¡Tracking adjustment will be done automatically  
(Digital Tracking function) when you start playback.  
To adjust the tracking manually, press the CHAN-  
NEL(o/p) buttons on the DVD/VCR.  
¡Press it again and the DVD/VCR will now search at  
super high speed. (in the LP/SLP modes only).  
INDEX SEARCH  
The index signal is recorded on the tape automatically  
when the recording is started. If you want to view a  
recording at a specific start point, this can be done easily.  
¡When a tape has reached the end, the DVD/VCR  
will automatically rewind the tape to the beginning,  
and eject the tape.  
1
Press the SEARCH MODE button so that the  
Index Search menu appears.  
¡S-VHS Quasi Playback (SQPB): This unit allows  
you to view a tape recorded in S-VHS format.  
(Noise lines may appear on the picture.)  
2
Enter your desired number by pressing the  
PLAY or the STOP button  
INDEX SEARCH  
03  
4
To stop playback, press the STOP button.  
within 30 seconds.  
PAUSE/STILL/SLOW  
You can freeze the picture on TV screen by pressing  
the PAUSE button during playback.  
3
Press the F.FWD or the REW button to start  
index search.  
¡You can advance the picture by one frame at a time  
by pressing the PAUSE button during the Still mode.  
¡If the picture begins to vibrate vertically during the  
still mode, stabilize the picture by pressing the  
CHANNEL(o/p) buttons.  
¡If you want to go in the forward direction, press the  
F.FWD button. If you want to go in the reverse  
direction, press the REW button.  
¡After index search, the DVD/VCR will play the tape  
automatically.  
¡If the picture is distorted or rolling vertically, adjust  
the vertical hold control on your TV, if so equipped.  
TIME SEARCH  
This feature allows you to fast forward or rewind the  
tape for the desired length of time.  
You can watch in the slow motion by pressing the  
SLOW button during playback or the still mode.  
¡If a noise bar appears on the TV screen, you can  
reduce it by pressing the CHANNEL(o/p) buttons.  
¡After the DVD/VCR has been in Still/Slow mode for  
5 minutes, it will stop automatically to protect the  
tape and the video head from damage.  
1
Press the SEARCH MODE button twice so  
that the Time Search menu appears.  
2
Enter your desired time to  
skip by pressing the PLAY  
TIME SEARCH  
2 : 50  
or the STOP button within  
30 seconds.  
¡To return to playback, press the PLAY button.  
3
Press the F.FWD or the REW button to start  
time search.  
AUTO REPEAT PLAYBACK  
VCR  
¡
If you want to go in the forward direction, press the  
F.FWD button.  
¡If you want to go in the reverse direction, press the  
REW button.  
This feature allows you to play a tape over and over.  
¡After time search, the DVD/VCR will play the tape  
automatically.  
1
Select main menu by pressing the MENU  
button.  
EN  
19  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING FUNCTION  
VCR  
¡
¡
If a tape ends during OTR, the VCR will stop, eject the  
tape, and switch to the DVD mode automatically as the  
TIMER SET light blinks. (If the DVD power is off, the  
DVD/VCR will become STANDBY status).  
When OTR is finished , the VCR turns off automatically.  
To use the VCR again, press the TIMER SET button on  
the DVD/VCR.  
It may be UNLAWFUL to record copyrighted materi-  
al without the consent of the copyright owner.  
Accidental Erasure Prevention  
To prevent accidental recording on a  
recorded cassette, remove its record  
safety tab. To record on it later, cover the  
Record safety tab  
hole with cellophane tape.  
Before recording, make sure:  
TIMER RECORDING  
¡The desired channel is selected by pressing the  
Number buttons on the remote control or the  
CHANNEL(o/p) buttons. (If you connected the  
DVD/VCR to a cable box or satellite box as in  
"DVD/VCR TO TV CONNECTION" on page 14,  
set the DVD/VCR to channel 3 or 4 i.e. the same  
channel as the CH3 or CH4 switch on the back of  
the DVD/VCR. Then, select the channel you want  
to record with the cable box or satellite box. In this  
case, you can ONLY record and view the SAME  
channel.)  
VCR  
You may set the DVD/VCR to start recording while  
you are away. You can set seven programs to record on  
specific days, daily or weekly within a 1 year period.  
If you have not yet set the clock, "CLOCK SET"  
appears. If so, follow the steps [3] and [4] in  
"CLOCK SET" section on page 18. Then, set the  
timer recording.  
1
2
3
Insert a tape with its safety tab intact.  
Press the MENU button.  
¡There is a tape with a safety tab into the DVD/VCR.  
¡The desired recording speed is selected in SP (stan-  
dard play) or SLP (super long play) mode by press-  
ing the SPEED button on the remote control.  
Select "TIMER PROGRAMMING" by pressing the  
PLAY or the STOP button. Then,  
TIMER PROGRAMMING  
press the F.FWD button. The set  
Tape Speed  
Recording/Playback Time  
PROG.  
DATE  
START TIME  
END TIME  
1 2 3 4 5 6 7  
Type of tape  
SP mode  
SLP mode  
T60  
1 hour  
3 hours  
T120  
2 hours  
6 hours  
T160  
2-2/3 hours  
8 hours  
up screen is displayed.  
CHANNEL  
REC SPEED  
¡TV STEREO or SAP is selected.  
4
Set the timer.  
¡If you make mistakes, press the REW button repeat-  
VIEWING AND RECORDING  
THE SAME PROGRAM  
edly to go back to the item you want to correct.  
¡If you press the REW button after step ), all the  
7
information youve just entered for that program  
VCR  
number will be cleared.  
1
Begin the recording by pressing the RECORD  
button. The REC/OTR Light comes on.  
1) Set the program number (1-7)  
PROGRAM NUMBER  
DATE - - / - -  
START TIME - - : - - - -  
END TIME - - : - - - -  
CHANNEL - -  
REC SPEED - -  
4
¡
¡
To temporarily stop recording or to resume it, press the  
PAUSE button. After the DVD/VCR has been in Pause  
mode for 5 minutes, it will stop automatically to protect  
the tape and the video head from damage.  
A program number which is not allocated  
flashes. Press the PLAY button or the  
STOP button repeatedly for the desired  
program number. Then, press the F.FWD button.  
2
Press the STOP button when the recording is  
completed.  
2) Set the frequency of the recording  
If a tape ends during recording, the VCR will automati-  
cally stop, rewind, and eject the tape.  
Press the PLAY button or the STOP  
PROGRAM NUMBER  
4
button to select the desired frequency from  
ONCE, DAILY, or WEEKLY recording.  
Then, press the F.FWD button.  
ONCE  
DAILY  
WEEKLY  
OTR (One Touch Recording)  
VCR  
This feature allows you to set the recording length simply by  
pressing the REC/OTR button on the DVD/VCR.  
ONE TIME PROGRAM  
PROGRAM NUMBER 4  
3) Set the date  
DATE  
- - / - - - -  
- - : - - - -  
- - : - - - -  
- -  
START TIME  
First, press the PLAY button or the STOP  
button for the month. Then, press the F.FWD  
button. Next, press the PLAY button or the  
END  
TIME  
3
Press the REC/OTR button to begin OTR. The  
REC/OTR Light comes on. Change the recording  
length by pressing the REC/OTR button repeatedly.  
CHANNEL  
REC SPEED  
- -  
STOP button for the day. Then, press the F.FWD button.  
REC  
OTR(0:30)  
OTR(1:00).....  
(Normal recording)  
OTR(8:00)  
OTR(7:30)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
20  
1L25  
¡
¡
If a tape is not in the DVD/VCR or does not have a safety  
tab, the TIMER SET light flashes and timer recording  
will not operate. Please insert a recordable tape.  
ONE TIME PROGRAM  
PROGRAM NUMBER 4  
4) Set the start time  
05 /13 MON  
- - : - - - -  
- - : - - - -  
- -  
DATE  
START TIME  
First, press the PLAY button or the STOP  
button for the hour. Then, press the  
F.FWD button. Next, press the PLAY  
END  
TIME  
CHANNEL  
When all timer recordings are finished, the TIMER  
SET light will flash. To use the DVD/VCR again as  
usual, press the TIMER SET button to disable the  
flashing TIMER SET light, then press the VCR/TV  
button to select the VCR position. The VCR/TV light  
will appear. Press the VCR button to choose VCR or  
DVD mode, then continue with the other features as  
described in this manual.  
When timer recordings are set, the TIMER SET light  
will come on. To use the DVD/VCR as usual until the  
time for the recording, press the TIMER SET button  
so that the TIMER SET light disappears. Press the  
VCR/TV button to choose the VCR position. The  
VCR/TV light will come on. Press the VCR button to  
choose VCR or DVD modes, then continue with the  
other features as described in this manual.  
- -  
REC SPEED  
button or the STOP button for the minute. Then, press the  
F.FWD button. And then, press the PLAY button or the  
STOP button for AM or PM. Then, press the F.FWD button.  
ONE TIME PROGRAM  
PROGRAM NUMBER 4  
5) Set the end time  
DATE  
05 /13 MON  
START TIME 07: 30 PM  
END TIME - - : - - - -  
Follow the same instructions as  
"Set the start time" to set  
the end time.  
¡
CHANNEL  
REC SPEED - -  
- -  
ONE TIME PROGRAM  
PROGRAM NUMBER  4  
6) Set the channel number  
05 /13 MON  
07: 30 PM  
08: 30 PM  
- -  
DATE  
START TIME  
Press the PLAY button or the STOP  
button repeatedly for the desired channel  
number. Then, press the F.FWD button.  
END  
TIME  
CHANNEL  
- -  
REC SPEED  
If you want to use the DVD player during  
a VCR timer recording or while the TIMER  
SET light is on or flashes.  
You can use the DVD player while the TIMER SET  
light is on or flashes, or during a timer recording. Press  
the POWER button to turn on the DVD/VCR. Press  
the VCR/TV button to choose VCR position. Press the  
DVD button on the remote control to choose DVD  
mode, then continue with the other DVD features as  
described in this manual. You dont have to set the  
TIMER off to use the DVD.  
If you connected the DVD/VCR to a cable box or satellite box  
as in "DVD/VCR TO TV CONNECTION" on page 14, set the  
DVD/VCR to channel 3 or 4 i.e. the same channel as the CH3  
or CH4 switch on the back of the DVD/VCR. Then, select the  
channel you want to record with the cable box or satellite box.  
Leave the cable box or satellite box on for timer recording.  
¡
ONE TIME PROGRAM  
PROGRAM NUMBER 4  
7) Set the tape speed  
DATE  
05 /13 MON  
07: 30 PM  
08: 30 PM  
16  
START TIME  
Press the PLAY button or the STOP  
button repeatedly for the desired tape  
speed. Then, press the F.FWD button.  
END  
TIME  
CHANNEL  
REC SPEED  
SP  
SP  
SLP  
TO STOP AN AUTOMATIC TIMER PRO-  
GRAM ALREADY STARTED  
Press the STOP/EJECT or the TIMER SET button on  
the DVD /VCR.  
5
To set another program, repeat step [4]. To exit  
from the set up screen, press the  
CLEAR/C.RESET button (You only exit from the  
set up screen. the information you entered for  
the timer recording will not be cleared).  
TO CHECK, CORRECT, OR CANCEL AN  
AUTOMATIC TIMER PROGRAM  
6
When you finish programming, press the  
TIMER SET button to activate the timer.  
1
Turn the power on by pressing the POWER  
button. (If the DVD/VCR is in TIMER STAND-  
BY status, press the TIMER SET button  
instead of the POWER button.)  
¡As the TIMER SET light comes on the VCR  
becomes STANDBY status, and switches to DVD  
OUTPUT mode automatically.  
¡When DVD sits idle for more than thirty-five min-  
utes, the DVD power will be turned off automatical-  
ly. If you press the TIMER SET button under such  
condition, the DVD/VCR power will be turned off  
and become STANDBY status.  
2
3
Select main menu by pressing the MENU  
button.  
Select "TIMER PROGRAMMING" by press-  
ing the PLAY or the STOP button. Then,  
press the F.FWD button.  
TO CLEAR A PROGRAM  
Follow the steps from 2 to 3. Select the program num-  
ber you want to clear, and then press the REW button.  
4
Select the program number which you want  
to check by pressing the PLAY or the STOP  
button.  
HINTS FOR TIMER  
RECORDING  
¡The details of the selected program appears on the  
TV screen.  
¡Go to the digit you want to change by pressing the  
F.FWD or the REW button. Then, enter correct num-  
bers by pressing the PLAY or the STOP button.  
¡You may cancel the entire program by pressing the  
REW button while the program number flashes.  
VCR  
¡If there is a power failure or the DVD/VCR is  
unplugged for more than 30 seconds, the clock set-  
ting and all timer settings will be lost.  
¡If a tape ends during TIMER RECORDING, the  
VCR will stop, eject the tape, and switch to the DVD  
mode automatically as the TIMER SET light blinks.  
(If the DVD power is off, the DVD/VCR will  
become STANDBY status).  
5
6
Press the CLEAR/C.RESET button to exit.  
Press the TIMER SET button to return to  
timer stand-by mode.  
EN  
21  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
¡Always use video-quality shielded cables with  
RCA-type connectors. Standard audio cables are not  
recommended.  
¡You can use a video disc player, satellite receiver, or  
other audio/video component with A/V outputs in  
place of the playing VCR.  
COPYING A VIDEO TAPE  
VCR  
You can make copies of video tapes made by friends or  
relatives for your enjoyment.  
Warning:  
Unauthorized recordings of copyrighted video tapes  
may be an infringement of copyright laws.  
Connect the recording DVD/VCR (this unit), the play-  
ing VCR (another source) and your TV using the fol-  
lowing diagram.  
TO MONITOR THE RECORDING  
1
Turn on theTV and set theTV to channel 3 or 4.  
¡Now set the CH3/CH4 switch on the back of the  
DVD /VCR to match the channel selected on the TV.  
¡You can use the AUDIO/VIDEO input jacks on the  
front panel of the DVD/VCR instead of using the  
jacks on the back.  
2
Press the VCR/TV button on the recording  
VCR so that the VCR/TV Light comes on.  
[Recording VCR]  
(this unit)  
MTS (Multi-Channel Television  
Sound) SYSTEM  
DVD/VCR  
OUT  
COMPONENT  
IN  
VIDEO OUT  
ANT - IN  
Y
L
AUDO  
R
DVD/VCR  
AUDIO OUT  
DIGITAL AUDIO OUT  
S-VIDEO  
OUT  
L
VCR  
Cr  
PCM BITSTREAM  
/
COAXIAL  
ANT - OUT  
R
VIDEO  
Cb  
3CH 4CH  
When you play a VHS tape, or receive a broadcast on the  
DVD/VCR tuner channel you are watching, the current  
status will appear when you press  
Coaxial cable  
Audio/Video cables  
(not supplied)  
(supplied)  
STOP  
12:00AM  
CH 32  
STEREO  
SAP  
the DISPLAY button on the  
remote control. When you record a  
MTS broadcast signal, you need to  
set it to MTS mode.  
[TV set]  
(Use for monitoring)  
1)*  
OUT  
LEFT RIGHT  
SP  
0:00:00  
HIFI  
IN  
2)*  
AUDIO  
VIDEO  
[Playing VCR]  
(another source)  
1)* When a program is broadcast in stereo,  
ANT in  
STEREO appears. When a program is  
broadcast in second audio, SAP appears.  
Although a program may be broadcast in both stereo  
and sub audio, you must select the Recording mode to  
TV STEREO or SAP before you record a broadcast.  
1
2
3
Insert a pre-recorded tape into the playing  
VCR.  
¡
Insert a tape with a safety tab into the  
recording VCR.  
2)* While the VCR is set in HiFi stereo mode,  
HiFi appears on the TV screen. While the  
VCR is set in monaural (MONO) mode,  
HiFi disappears from the TV screen.  
Press the SPEED button on the recording  
VCR to select the desired recording speed  
(SP/SLP).  
¡If you play non-HiFi tapes while the VCR is set in  
HiFi, HiFi will disappear from the TV screen and the  
VCR will automatically play in monaural.  
¡
When you use the A/V input jacks on the back of the  
DVD/VCR, select "L1" position by pressing [0], [0], [1]  
on the remote control or the CHANNEL(o/p) buttons.  
¡
When you use the A/V input jacks on the front of the  
DVD/VCR, select "L2" position by pressing [0], [0], [2]  
on the remote control or the CHANNEL(o/p) buttons.  
MTS RECORDING/MONITOR MODE  
Display on the  
TV screen  
Type of  
STEREO/SAP  
Selection  
Hi-Fi audio track  
(2-channel)  
Normal audio  
track  
broadcast  
L-channel R-channel  
Regular  
-None-  
-Invalid-  
Note  
(monaural audio)  
Mono  
L
Mono  
R
Mono  
L+R  
L1and L2are found before the lowest memo-  
rized channel. (Example: CH2)  
Stereo  
broadcast  
STEREO  
SAP  
-Invalid-  
TV STEREO*  
SAP*  
Main audio Main audio Main audio  
program  
program  
program  
Bilingual  
broadcast  
Sub audio Sub audio  
Sub audio  
program  
4
5
Press the REC/OTR button on the recording VCR.  
program  
L
program  
R
TV STEREO*  
SAP*  
L+R  
Sub audio  
program  
Stereo &  
Bilingual  
broadcast  
STEREO  
SAP  
Begin playback of the tape in the playing  
VCR.  
Sub audio Sub audio  
program program  
*
¡For best results during dubbing, use the  
DVD/VCRs front panel controls whenever possi-  
ble. The remote control might affect the playing  
DVD/VCRs operation.  
EN  
22  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO REWIND  
REAL TIME TAPE COUNTER  
When a tape reaches the end during recording, play-  
back, or fast-forward, the tape will automatically  
rewind to the beginning. After rewinding finishes, the  
DVD/VCR will eject the tape.  
¡The DVD/VCR will not rewind the tape automati-  
cally during timer recording or One Touch  
Recording.  
¡This shows the elapsed recording or playback time  
in hours, minutes, and seconds. (The displayed time  
will not change during blank portions of the tape.)  
¡The indication will appear when the tape is rewound  
further than 0:00:00on the tape counter.  
PLAYING A DISC  
Notes  
PLAYING A DVD VIDEO  
OR AN AUDIO CD  
¡A prohibited iconmay appear at  
the top-right on the TV screen  
during operation, warning that a  
prohibited operation has been  
encountered by the DVD/VCR or  
the disc.  
DVD  
CD  
Getting started  
Turn on the power of the TV, amplifier and any other  
components which are connected to the DVD/VCR.  
(Change the input system to suite the DVD/VCR, and  
check that the sound volume is correct).  
¡If a disc is dirty or has scratches, the pictures may  
appear distorted and the playback operation may  
stop. In such cases, clean the disc and unplug the  
power cord and then plug it again before resuming  
playback.  
1
Press the POWER button.  
¡The power will turn on.  
¡With DVDs that use titles for playback program  
signals, playback may start from the second title, or  
it may skip these titles.  
Check that the DVD OUTPUT Light is lit. If not  
press the DVD button on the remote control to  
switch to DVD/VCR mode.  
¡During the playback of a two layered disc, pictures  
may stop for a moment. This happens when the 1st  
layer switches to the 2nd layer. This is not a mal-  
function.  
2
Press the OPEN/CLOSE button.  
¡The disc loading tray will open.  
3
Place a disc into the tray.  
USING THE DVD MENUS  
¡Make sure the disc is sitting properly in the correct  
recess, with the label side up.  
DVD  
Some DVDs contain their own menus, such as a guid-  
ance menu which describes the contents of the disc or  
a selection menu for sound, language and other cus-  
tomized settings.  
1
Press the MENU button.  
4
Press the PLAY button.  
¡The DVD menu will appear.  
¡The tray will close automatically, and playback will  
then start from the first chapter or track of the disc.  
You need to press the PLAY button only when the  
tray has been closed by pressing the OPEN/CLOSE  
button.  
2
Select the desired title.  
¡Press the arrow buttons (L/K/B/s) to change the  
setting, and then press the ENTER button.  
¡If your DVD has a title menu, it may appear on the  
screen. In this case, refer to USING THE DVD  
MENUSin the next section, or USING THE  
TITLE MENUon page 24.  
3
Playback will start from the selected title.  
5
Press the STOP button to stop play.  
EN  
23  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RESUMING PLAYBACK FROM  
THE POINT WHERE  
USING THE TITLE MENU  
PLAYBACK STOPPED  
DVD  
DVD  
CD  
With a DVD containing a title menu, you can select the  
desired titles from the menu.  
1
Press the STOP button during playback.  
1
Press the TITLE button.  
¡Playback will stop, and then appear the resuming  
message at the center.  
¡The title menu will appear.  
¡With some discs, a title menu may appear automati-  
cally. In this case, skip to step 2.  
Press 'PLAY' to play from here.  
To play the beginning, press 'STOP' first  
and then 'PLAY'.  
2
Select the desired title.  
¡Press the arrow buttons (L/K/B/s) to select a  
desired title, and then press the ENTER button.  
CALLING UP A MENU SCREEN  
DURING PLAYBACK  
For DVDs  
2
Press the PLAY button. Playback will start  
from the point where the previous playback  
session was stopped.  
B
¡Press the MENU button to call up the DVD menu.  
¡Press the TITLE button to call up the title menu.  
Note  
Note  
¡The contents of menus and corresponding menu  
operations may vary between discs. Refer to the  
manual accompanying the disc for details.  
¡The resume function can be reset by pressing the  
STOP button twice or by opening the disc loading  
tray.  
PAUSING PLAYBACK OR  
DISPLAYING A STILL PICTURE  
STEPPING THROUGH FRAMES  
DVD  
CD  
DVD  
1
Press the PAUSE button during playback.  
1
Press the PAUSE button while playback is  
¡Playback will pause, with sound  
muted.  
F
paused.  
F
¡The next picture frame is dis-  
played with sound muted each  
time the button is pressed.  
2
Press the PLAY button to resume playback.  
2
Press the PLAY button to resume playback.  
B
B
EN  
24  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STARTING FROM A DESIRED  
TRACK  
FAST FORWARD/REVERSE  
DVD  
CD  
CD  
1
Press the FWD g or the REV h button  
during playback.  
1
Press the Number buttons to enter the  
desired track number.  
¡For DVDs, pressing the FWD g or REV h but-  
ton cycles the playback speed in four steps. In the  
case of DVDs, the sound will mute.  
¡For audio CDs, the playback speed is fixed at ×16.  
¡
The selected track will be located, and playback will start.  
You can also press the SEARCH  
MODE button and use the Number  
buttons to enter the track number.  
:
TR  
5
REV  
Button  
FWD  
Button  
x2  
x8  
x2  
x8  
When the track number is entered in the entry box,  
playback of the desired track will start automatically.  
TRICKS WITH THE SKIP BUTTONS (H, G)  
If the SKIP button G is pressed during playback  
or while playback is paused, the current track will  
be skipped and the next track will start. If the SKIP  
button H is pressed once, the beginning of the  
current track will be located for replay. If the SKIP  
button H is pressed again within 2 seconds  
after playback begins, the previous track will be  
located.  
x30  
x60  
x30  
x60  
PLAYING FROM A DESIRED  
TITLE OR A CHAPTER  
2
1
Press the PLAY button to return to normal  
playback speed.  
DVD  
There are two ways you can jump to a desired title or  
a chapter.  
SLOW MOTION  
By using the ‘SEARCH MODE’ button.  
DVD  
1
Press the SEARCH MODEbutton.  
Press the FWD g button while playback is  
paused. (Sound remains muted.)  
¡The title/chapter search display will be displayed.  
TT : 1/ 2  
TT : _/ 12  
CH __ / 49  
¡Slow motion mode will be activated.  
CH : 12/ 49  
¡Pressing the FWD g button cycles the playback  
speed in three steps. Select the appropriate speed  
while referring to the speed indication on the screen.  
2
3
If you wish to perform a title search, select  
TT. If you wish to perform a chapter search,  
select CHwith K/L buttons.  
FWD  
Button  
×1/16  
Enter the desired title or chapter number  
with the Number buttons (If you are entering  
a single digit number press 0first).  
×1/8  
¡When you finish entering the number, the selected  
title or chapter will start automatically  
Notes  
.
×1/2  
¡If you didnt press 0before entering the single  
digit number, you have to press ENTER to go to the  
desired title or the chapter.  
2
Press the PLAY button to return to normal  
playback speed.  
Notes  
¡Slow playback is not available with audio CDs.  
¡Reverse slow motion is not available.  
¡Slow playback from a TITLE to other TITLE is not  
possible.  
EN  
25  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
By using only the Number buttons.  
TITLE SEARCH:  
MARKER  
1
Directly enter the desired title number with the  
Number buttons with playback stopped.  
DVD  
CD  
CHAPTER SEARCH:  
You can define the part to be called back.  
1
Directly enter the desired chapter number  
with the Number buttons when the disc is  
being played or paused.  
1
Press the SEARCH MODE button three  
times during playback.  
¡When you finish entering the number, the selected  
1 2 3 4 5 AC  
NOT SET  
title or chapter will start automatically.  
Set the marker  
¡Using the cursor (s / B) buttons,  
position the cursor on to the  
marker number shown as NOT SET. Press the  
ENTER button when the screen to be reviewed  
appears. The marked time will be displayed. Up to  
5 points can be marked.  
Notes  
¡Play back from a desired title or chapter is not avail-  
able with some DVDs.  
¡If the title being played does not display the chapter  
number, that means the chapter search function is  
not available with that title.  
TRICKS WITH THE SKIP BUTTONS (H, G)  
Call back the marker  
¡Using the cursor (s / B) buttons, position the cursor  
on to the marker number to be called back and press  
the ENTER button.  
If the SKIP button G is pressed during playback or  
while playback is paused, the current chapter will be  
skipped and the next chapter will start. If the SKIP  
button H is pressed once, the beginning of the cur-  
rent chapter will be located for replay. If the SKIP  
button H is pressed again within 2 seconds after  
playback begins, the previous chapter will be locat-  
ed.  
Clear the marker  
¡Using the cursor (s / B) buttons, position the cursor  
on to the marker number to be cleared and press the  
CLEAR/C.RESET button.  
To clear all markers, place the cursor on AC(All  
clear markers) and press the ENTER button.  
STARTING FROM A DESIRED  
TIME COUNT  
2
Press the SEARCH MODE button or the  
RETURN button to exit the display.  
DVD  
CD  
RANDOM (Audio CD)  
1
2
Press the SEARCH MODE button twice dur-  
ing playback or while paused.  
CD  
1
Press the MODE button in stop mode.  
Press the Number buttons to set the desired  
¡The program setting menu screen will appear.  
time count.  
TIME 1:23:30  
TOTAL 1:29:00  
¡Example: 1 hour, 23 minutes and  
30 seconds  
2
Press the MODE button again.  
1 2 3 3 0  
RANDOM  
Notes  
¡For a DVD, Time Search in Title is effective. (But  
Time Search in Chapter is ineffective.)  
START : PLAY  
EXIT : MODE  
¡For a CD, Time Search in Track is effective. (But  
Time Search in the entire disc is ineffective.)  
¡Playback from a desired time count is not available  
with some discs or if the unit is in stop mode.  
¡If the wrong numbers are entered, press the  
CLEAR/C.RESET button and re-enter the correct  
numbers.  
3
Press the PLAY button. Random playback  
will then start.  
Note  
¡Program playback is not available during random  
playback.  
EN  
26  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPEAT  
A-B REPEAT  
DVD  
CD  
DVD  
CD  
1
Press the REPEAT button during playback.  
You can define a section to be played back repeatedly.  
For DVDs  
1
Press the A-B REPEAT button during playback.  
¡A single title or chapter can be played back repeat-  
edly.  
REPEAT  
¡The starting point (A) will then be  
selected.  
[ A -  
]
¡Pressing the REPEAT button cycles the display on  
the screen as follows.  
REPEAT  
[OFF]  
No repeat playback.  
2
Press the A-B REPEAT button again at the  
end point (B) of the desired section.  
REPEAT  
[CHAPTER]  
The current chapter is  
¡The selected section will be  
played back repeatedly.  
played back repeatedly.  
REPEAT  
[ A - B ]  
REPEAT  
[TITLE]  
The current title is  
played back repeatedly.  
3
To exit A-B repeat playback, press the A-B  
For audio CDs  
REPEAT button and set it to OFF.  
REPEAT  
[ OFF ]  
¡The whole disc or a single track can be played back  
repeatedly.  
¡Pressing the REPEAT button cycles the display on  
the screen through Off, Track and All.  
Notes  
¡With DVDs, the A-B repeat section can be set only  
within the current title.  
REPEAT  
[OFF]  
No repeat playback.  
¡With audio CDs, the A-B repeat section can be set  
within the current track.  
REPEAT  
[TRACK]  
The current track is  
played back repeatedly.  
¡A-B repeat is not available with some scenes in  
DVD.  
REPEAT  
[ALL]  
The whole disc is  
played back repeatedly.  
¡To cancel the A point which was set, press the  
CLEAR/C.RESET button.  
¡A-B repeat playback does not function when title,  
chapter, or repeat (all) playback has been set.  
If the REPEAT button is pressed once dur-  
ing program/random playback, the current  
track will be played back repeatedly.  
If the REPEAT button is pressed again, the  
program/random playback will be per-  
formed repeatedly.  
Notes  
¡Repeat playback is not available with some discs.  
¡The REPEAT setting will be cleared when moving  
to an other title, chapter or track.  
¡Repeat playback does not function during A-B  
repeat playback.  
EN  
27  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZOOM PLAYBACK  
PROGRAM (Audio CD)  
(enlargement on-screen)  
CD  
DVD  
Images can be enlarged on the screen to your taste.  
1
Press the MODE button in stop mode.  
¡The program screen will appear.  
1
Press the ZOOM button during playback.  
PROGRAM  
--  
TIME 0:00:00 1/1  
¡The image will be enlarged at the center of the  
screen.  
¡Pressing the ZOOM button cycles the zooming  
START: PLAY  
DELETE  
EXIT  
:
CLEAR  
RETURN  
RANDOM  
:
MODE  
:
images in two steps.  
2
Press the Number buttons to enter the  
desired track numbers.  
ZOOM [x2]  
ZOOM [x4]  
ZOOM [OFF]  
PROGRAM  
TIME 2:07:43 1/1  
02 05 07 04 10 14 06 15 21 08  
20 28 10 25 35 12 30 42 11 34  
¡50 programs can be displayed  
at once on the screen. Press  
Lto go to the next page.  
49 16 40 58 18 45 63 01 03  
_
START: PLAY  
RANDOM MODE  
DELETE  
EXIT  
:
CLEAR  
RETURN  
:
:
2
When the cursor (K/L/s / B) button is  
pressed during zoom play, the part to be zoomed  
moves.  
3
Press the PLAY button.  
¡The zooming frame can be moved from the center 4  
steps to the right, 4 steps to the left, 4 steps to the  
top, and 4 steps to the bottom when times 2 zoom-  
ing. The frames will move 6 steps when times 4  
zooming.  
¡Playback will start in the programmed order.  
¡While the program is being played back, the STOP  
button works as follows.  
¡Press the STOP button once and then press the  
PLAY button again. Playback will restart from the  
point where the STOP button was pressed. (Program  
continued)  
¡The current position will be displayed on the right-  
bottom of the screen. Press the ENTER button, and  
the display will disappear.  
TO CLEAR THE PROGRAM  
1
Press the STOP button twice, and the pro-  
gram will be cleared.  
Notes  
¡Adding programs is not possible during program  
playback. You must stop the current playback before  
such operations can be carried out.  
¡Press the CLEAR/C.RESET button to cancel a pro-  
gram. The most recently entered program will then  
be deleted.  
Note  
¡Zooming function does not work while the disc  
menu is being shown.  
¡Up to 99 programs can be entered.  
¡Playback from a desired track and random playback  
are not available during program playback.  
¡Program settings will be cleared when the power is  
turned off or the disc loading tray is opened.  
¡Press the MODE button to check the programmed  
setting.  
¡The programs will be cleared when you turn the  
power off.  
EN  
28  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING THE ON-SCREEN  
DISPLAY DURING MP3 DISC PLAY  
PLAYING AN MP3 DISC  
MP3  
MP3  
The information on an MP3 disc in play can be  
checked.  
1
Insert an MP3 file recorded on disc.  
¡The MP3 menu screen is displayed.  
1
Press the DISPLAY button during playback.  
¡Folders are referred to as  
Albumsand files are  
referred to as Tracks.  
VOLUME LABEL  
¡The track currently being  
played will be highlighted.  
ALBUM NAME  
A
FIRST PLAY  
+ALBUM01  
+ALBUM02  
+ALBUM03  
+ALBUM04  
TRACK11  
TRACK12  
TRACK13  
TRACK14  
TRACK15  
1/15  
¡+appears at the beginning  
SELECT:  
RETURN:  
/
ENTER:  
START  
of the album name.  
:
PLAY  
¡If all the tracks cannot be displayed at once on the  
screen, Lappears to go to the next page. If there  
is a previous page, Kappears on screen. To the  
left of L, the current page and the total number of  
pages are displayed.  
2
Press the DISPLAY button again.  
¡The album name being displayed will be replaced by  
the elapsed time of the track.  
¡
will be displayed when repeat play has been  
¡The player can recognize 255 albums and tracks  
altogether.  
selected.  
0:02:31  
A
T: Track repeat  
TRACK11  
TRACK12  
TRACK13  
TRACK14  
TRACK15  
2
Using the K/L buttons, select a album or a  
track to be played.  
A: Album (folder) repeat  
D: Disc repeat  
[When a TRACK is selected]  
Starting from the selected track,  
the rest of the tracks will be  
played in order.  
ALBUM01  
+ALBUM11  
+ALBUM12  
+ALBUM13  
+ALBUM14  
+ALBUM15  
3
Press the DISPLAY button again, and the dis-  
play screen disappears.  
SELECT:  
RETURN:  
/
ENTER:  
START  
:
PLAY  
[When an ALBUM is selected]  
Press the B button. The track selection screen shows  
up. Using the K/L buttons, select the tracks to be  
played.  
¡Choose FIRST PLAY, and the albums and tracks  
will be played from the beginning of the disc.  
¡Press the TITLE button, and the top hierarchy will  
be called back.  
¡Albums can be played up to the 8th hierarchy.  
3
Press the PLAY button.  
¡Playback will start.  
To stop playing, press the STOP button.  
4
EN  
29  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DESIRED TRACK  
FROM AN MP3 DISC  
PLAYING AN MP3 DISC IN A  
PROGRAM  
MP3  
MP3  
1
P
back.  
ress the SEARCH MODE button during play-  
1
Press the MODE button in STOP mode.  
¡The program screen is displayed.  
¡The SEARCH menu is displayed.  
PROGRAM-FOLDER NAME  
¡The track currently being played or in RESUME ON  
will be highlighted. In the case of RESUME OFF,  
the first track of the disc will be highlighted.  
+ALBUM01  
+ALBUM02  
+ALBUM03  
TRACK01  
TRACK02  
1/11  
1/1  
¡Press the RETURN button, and the SEARCH menu  
disappears.  
START  
RANDOM: MODE  
:
PLAY  
DELETE: CLEAR  
EXIT RETURN  
:
ALBUM NAME  
+ALBUM01  
TRACK11  
TRACK12  
TRACK13  
2
Use the ARROW buttons (L/K) to select a  
track. Then press the ENTER button to save  
it in a program.  
TRACK14  
1/15  
SELECT:  
RETURN:  
ENTER:  
START PLAY  
:
PROGRAM - ALBUM01  
+ALBUM11  
+ALBUM12  
TRACK11  
TRACK12  
TRACK13  
TRACK11  
2
Using the K/L buttons, select the track to  
be played. Then press the PLAY button to  
start playing.  
1/11  
1/1  
START  
:
PLAY  
DELETE: CLEAR  
RANDOM: MODE  
EXIT:  
RETURN  
Notes  
¡When an album name is highlighted, press the  
L
button, and the next hierarchy is displayed.  
¡During play, a desired track can be searched for  
directly. Just enter the track number with the  
Number buttons.  
¡Press the K button to go back to the previous hier-  
archy.  
¡If the track number entered is not available, the dis-  
ablesymbol appears and the direct search mode is  
cancelled.  
¡If the entire program cannot be displayed at once on  
the screen, Lappears to go to the next page.  
3
When the program has been selected, press  
the PLAY button.  
¡Playback cannot be started from a desired time  
count.  
¡The program will begin.  
PLAYING AN MP3 DISC  
RANDOMLY  
Notes  
¡Press the CLEAR/C.RESET button, and the last-  
programmed entry will be deleted.  
MP3  
¡Press the RETURN button, and the program screen  
will be displayed and the program stored in memo-  
ry.  
1
Press the MODE button twice in STOP mode.  
¡The random setting menu screen will appear.  
¡The program setting will be cancelled when the  
RANDOM  
power is turned off or the disc tray is opened.  
PROGRAM - ALBUM05  
+ALBUM51  
+ALBUM52  
TRACK51  
TRACK52  
TRACK63  
TRACK11  
TRACK52  
TRACK31  
TRACK22  
TRACK03  
START  
:
PLAY  
EXIT: MODE  
1/11  
2/3  
START  
RANDOM: MODE  
:
PLAY  
DELETE:  
EXIT  
CLEAR  
RETURN  
:
2
Press the PLAY button.  
¡Random play will begin.  
EN  
30  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
Notes  
CHANGING THE AUDIO  
LANGUAGE OR SOUND MODE  
¡Pressing the Audio button may not work on some  
DVDs with multiple audio languages (e.g. DVDs  
which allow audio language setting on the disc  
menu). Operation varies between discs, so refer to  
the manual accompanying the disc.  
DVD  
CD  
The DVD/VCR has a function which allows you to  
select the desired audio language and sound mode.  
¡The current audio language and sound mode will be  
displayed when you first press the AUDIO button.  
For DVDs  
¡If the desired language is not shown after pressing  
the Audio button several times, the disc does not  
have an audio source in that language.  
1
Press the AUDIO button during playback.  
¡The current audio status will appear at the top.  
¡The audio language resets to the one which was  
selected in the setup mode every time the power is  
turned on or discs are replaced. If that language is  
not available on a disc, a language defined by the  
disc will be selected.  
2
Press the AUDIO button repeatedly until you  
see the language of your choice.  
¡The audio language mode can be changed only if the  
disc is recorded with a multiple language setting.  
¡The screen display will disappear after about 5  
seconds.  
AUDIO 1.ENG DolbyD 5.1CH 48k/3  
¡If you use DIGITAL AUDIO OUT jack, the sound  
mode of audio CDs can not be changed.  
AUDIO 2.FRE DolbyD 5.1CH 48k/3  
AUDIO 3.JPN DolbyD 5.1CH 48k/3  
Bon jour  
HELLO  
For audio CDs  
Press the AUDIO button during playback.  
¡Pressing the AUDIO button cycles the sound mode  
through STEREO, L-CH and R-CH.  
AUDIO STEREO  
Both right and left channels  
are active (stereo).  
AUDIO L-CH  
Only the left channel is active.  
AUDIO R-CH  
Only the right channel is active.  
EN  
31  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
¡It may take time to display the subtitles in the  
selected language.  
¡The screen display will disappear after about 5  
CHANGING THE SUBTITLE  
LANGUAGE  
seconds.  
DVD  
¡When SUBTITLE NOT AVAILABLEappears on  
screen, it means that no subtitle has been recorded.  
The DVD/VCR has a function which allows you to  
select the desired language for subtitles.  
CHANGING THE CAMERA  
ANGLE (Multi-Angle Pictures)  
1
Press the SUBTITLE button during playback,  
and then press the SUBTITLE button to select the  
desired subtitle language.  
DVD  
¡The subtitle language can be changed if the subtitles  
are recorded in multiple languages on the DVD  
being played.  
The DVD/VCR has a function which allows you to  
select the desired camera angle.  
¡The subtitle language cannot be changed if the  
subtitles are recorded in a single language on the  
DVD being played.  
1
Press the ANGLE button during playback.  
¡If the disc contains sequences recorded from differ-  
ent camera angles, the angle icon ( ) will appear  
at the top-right of the screen. You can change the  
camera angle when the icon appears on the screen.  
SUBTITLE 1.ENG/6  
Subtitle 1  
¡The camera angle cannot be changed if the disc does  
not contain sequences recorded from different  
camera angles.  
SUBTITLE 2.FRE/6  
Subtitle 2  
SUBTITLE OFF  
2
Press the ANGLE button while the angle  
number is shown on the screen.  
OFF  
ANGLE 1 / 8  
Angle 1  
¡Pressing the SUBTITLE button cycles the subtitle  
language from SUBTITLE 1, SUBTITLE 2 and all  
the languages recorded.  
¡The current subtitle mode will be displayed when  
you first press the SUBTITLE button.  
ANGLE 2 / 8  
Angle 2  
¡Press the SUBTITLE button, and then press the cur-  
sor (s / B) button to set it to on or off.  
ANGLE 8 / 8  
Angle 8  
Notes  
¡The screen display will disappear after about 5  
seconds.  
Bon jour  
HELLO  
¡The current camera angle will be displayed when  
you first press the ANGLE button.  
Notes  
¡Some discs allow subtitle language setting on the  
disc menu. (Operation varies between discs, so refer  
to the manual accompanying the disc.)  
¡If the desired language is not shown after pressing  
the SUBTITLE button several times, the disc does  
not have subtitles in that language.  
¡The subtitle language resets to the one which was  
selected in the setup mode, every time the power is  
turned on or discs are replaced. If that  
language is not available on a disc, a language  
defined by the disc is selected.  
EN  
32  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING THE ON-SCREEN  
DISPLAY  
2
Press the DISPLAY button again.  
DVD  
CD  
ALL 4/12 0:13:45 -0:45:40  
B
ALL:  
TIME:  
You can check the information regarding the disc by  
pressing the DISPLAY button on the remote control.  
Current track number  
/ the total number of  
tracks.  
Elapsed time of the  
current disk and  
remaining time of  
the current disc.  
For DVDs  
¡Use the Number buttons to start from a desired  
track.  
1
Press the DISPLAY button during playback.  
3
Press the DISPLAY button or the RETURN but-  
ton to exit the display.  
CH 7/49 0:01:46 -0:03:27  
TIME:  
CH (Chapter):  
Elapsed time of the  
current chapter and  
remaining time of the  
current chapter.  
Current chapter number  
/ the total number of  
chapters.  
BLACK LEVEL SETTINGS  
DVD  
You can select the BLACK LEVEL ON to make the  
black areas of the picture brighter.  
2
Press the DISPLAY button again.  
TT 1/2 0:00:00 -1:23:45  
1
Press the MODE button during playback.  
TT(Title):  
TIME:  
Current title number  
/ the total number of  
titles.  
¡The setup screen is displayed.  
Elapsed time of the  
current title and remaining  
time of the current title.  
:
BLACK LEVEL ON  
2
Press the ENTER button to turn it on or off.  
¡Use the Number button to start from the desired  
chapter.  
¡ON: This makes the dark parts brighter. (Default:  
ON)  
OFF: The original picture which is recorded on the  
disc will be shown.  
3
Press the DISPLAY button again.  
¡Press the RETURN button to exit the display.  
BIT RATE indicator will appear.  
BIT RATE shows the quantity of  
information which is recorded on the DVD.  
BIT RATE  
C L0  
TruSurround SETTINGS  
Layer number (*)  
L0: Layer 0 is playing  
L1: Layer 1 is playing  
Current Repeat setting  
C: Chapter repeat  
T: Title repeat  
You can enjoy stereophonic sound system when you  
playback Dolby Digital and PCM 48 kHz sound.  
A
B: A-B repeat  
* appears when a layered disc is playing.  
1
Press the MODE button twice during playback.  
¡The setup screen will appear.  
SRS TruSurround ON  
4
Press the DISPLAY button or the RETURN but-  
ton to exit the display.  
2
Press the ENTER button to set it on or off.  
ON: TruSurround ON.(Default : OFF)  
OFF: TruSurround OFF.  
¡Press the DISPLAY button ( you may have to press  
it more than once), or press the RETURN button to  
exit the display.  
For audio CDs  
1
Press the DISPLAY button during playback.  
TR 4/12 0:03:21 -0:02:15  
B
TR (Track):  
¡SRS TruSurround is available only when the  
DVD/VCR is connected to a TV or a stereo using the  
red and white AUDIO OUT jacks on the DVD/VCR.  
TIME:  
Current track number  
/ the total number of  
tracks.  
Elapsed time of the  
current track and  
remaining time of  
the current track.  
EN  
33  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING THE SETUP ITEMS  
PLAYER MENU:  
(The on-screen display appears in selected language.)  
LANGUAGE SETTINGS  
SET-UP  
LANGUAGE CONTROLS  
DVD  
1.AUDIO  
ORIGINAL  
OFF  
ORIGNAL  
ENGLISH  
2.SUBTITLE  
3.DISC MENU  
4.PLAYER MENU  
1
Press the SETUP button in STOP mode.  
¡The setup screen is displayed.  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
:
SETUP  
SET-UP  
1.LANGUAGE  
2.DISPLAY  
3.AUDIO  
4.PARENTAL  
4
Press the K/L buttons to select a desired  
item, and then press the ENTER button.  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
:
SETUP  
¡If OTHERis selected on the AUDIO, SUBTITLE  
or DISC MENU setting screen, the Language Code  
setting screen will appear. Press the Number buttons  
to enter the desired language code while referring to  
the list on page 38.  
2
Press the K/L buttons to select Language,  
and then press the ENTER button.  
SET-UP  
SET-UP  
LANGUAGE CONTROLS  
DISC MENU  
1.LANGUAGE  
2.DISPLAY  
3.AUDIO  
4.PARENTAL  
LANGUAGE CODE  
Please enter a 4-digit Language code.  
- - - -  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
:
SETUP  
EXIT: SETUP  
CANCEL: RETURN  
3
Press the K/L buttons to select an item, and  
then press the ENTER button.  
5
Press the SETUP button.  
¡The setup mode will be canceled and the ordinary  
screen is displayed.  
AUDIO:  
(Voice is played in selected language.)  
SET-UP  
LANGUAGE CONTROLS  
Notes  
1.AUDIO  
ORIGINAL  
¡Language Setting for Audio and Subtitle is not avail-  
able with some discs, so use the Audio and the  
Subtitle button. Details are on pages 31 and 32.  
¡You can also select an item by entering the number  
besides it using the Number buttons.  
2.SUBTITLE  
3.DISC MENU  
4.PLAYER MENU  
OFF  
ORIGNAL  
ENGLISH  
SELECT:  
EXIT  
/
SET  
:
ENTER  
:
SETUP  
CANCEL: RETURN  
SUBTITLE:  
(Subtitles are shown in selected language.)  
¡When you change the setup items, press the STOP  
button if you are in playback mode.  
SET-UP  
LANGUAGE CONTROLS  
¡While the setup menu is shown, you can not open or  
close the tray.  
1.AUDIO  
ORIGINAL  
OFF  
ORIGNAL  
ENGLISH  
2.SUBTITLE  
3.DISC MENU  
4.PLAYER MENU  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
:
SETUP  
DISC MENU:  
(The disc menu appears in selected language.)  
SET-UP  
LANGUAGE CONTROLS  
1.AUDIO  
ORIGINAL  
OFF  
ORIGINAL  
ENGLISH  
2.SUBTITLE  
3.DISC MENU  
4.PLAYER MENU  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
:
SETUP  
EN  
34  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY SETTINGS  
ANGLE ICON (Default: ON)  
Display or not display the Angle icon on the screen.  
DVD  
SET-UP  
DISPLAY CONTROLS  
1
Press the SETUP button in STOP mode.  
1.TV ASPECT  
2.PANEL DISPLAY  
3.ANGLE ICON  
4:3 LETTER BOX  
BRIGHT  
ON  
4.AUTO POWER OFF ON  
5.BACKGROUND BLUE  
¡The setup screen will appear.  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
SET-UP  
:
SETUP  
1.LANGUAGE  
2.DISPLAY  
3.AUDIO  
4.PARENTAL  
AUTO POWER OFF (Default: ON)  
Set or not set to turn off after the screen saver is started and  
no keys are pressed for 35 minutes.  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
:
SETUP  
SET-UP  
DISPLAY CONTROLS  
1.TV ASPECT  
2.PANEL DISPLAY  
3.ANGLE ICON  
4.AUTO POWER OFF ON  
5.BACKGROUND BLUE  
4:3 LETTER BOX  
BRIGHT  
ON  
2
Press the K/L buttons to select DISPLAY  
and then press the ENTER button.  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
SET-UP  
:
SETUP  
1.LANGUAGE  
2.DISPLAY  
3.AUDIO  
BACKGROUND COLOR (Default: BLUE)  
Select blue or gray.  
4.PARENTAL  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
:
SETUP CANCEL  
:
SET-UP  
DISPLAY CONTROLS  
1.TV ASPECT  
2.PANEL DISPLAY  
3.ANGLE ICON  
4:3 LETTERBOX  
BRIGHT  
ON  
3
Press the K/L buttons to select an item, and  
then press the ENTER button.  
4.AUTO POWER OFF ON  
5.BACKGROUND BLUE  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
:
SETUP  
TV ASPECT (Default: 4:3 LETTER BOX)  
4:3 LETTER BOX: Wide screen with black bars on top and  
bottom  
4:3 PAN & SCAN: Full height picture, trimmed both sides  
16:9 WIDE: If wide screen TV is connected  
4
5
Press the K/L buttons to select a desired  
item, and then press the ENTER button to  
change the setting.  
SET-UP  
DISPLAY CONTROLS  
1.TV ASPECT  
2.PANEL DISPLAY  
3.ANGLE ICON  
4.AUTO POWER OFF ON  
5.BACKGROUND BLUE  
4:3 LETTER BOX  
BRIGHT  
ON  
Press the SETUP button.  
SET-UP  
DISPLAY CONTROLS  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
¡The setup mode will be canceled and the ordinary  
TV ASPECT  
:
SETUP CANCEL  
:
1.4:3 LETTER BOX  
2.4:3 PAN & SCAN  
3.16:9 WIDE  
screen will appear.  
Notes  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
¡You can also select an item by entering the number  
:
SETUP CANCEL  
:
besides it using the Number buttons.  
PANEL DISPLAY (Default : BRIGHT)  
Adjust the brightness of the display of the unit.  
Auto: Stays dim only during playback.  
SET-UP  
DISPLAY CONTROLS  
1.TV ASPECT  
2.PANEL DISPLAY  
3.ANGLE ICON  
4:3 LETTER BOX  
BRIGHT  
ON  
SET-UP  
DISPLAY CONTROLS  
PANEL DISPLAY  
4.AUTO POWER OFF ON  
5.BACKGROUND BLUE  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
:
SETUP CANCEL  
:
1.BRIGHT  
2.DIMMER  
3.AUTO  
SELECT:  
/
SET  
:
ENTER  
EXIT:  
SETUP CANCEL  
:
RETURN  
EN  
35  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DTS (Default: OFF)  
AUDIO SETTINGS  
On : Output DTS sound  
Set to On when the unit is connected to DTS  
Decoder.  
DVD  
SET-UP  
AUDIO CONTROLS  
1
Press the SETUP button in STOP mode.  
1.DRC  
2.DOLBY DIGITAL  
3.DTS  
OFF  
ON  
OFF  
AUTO  
SET-UP  
¡The setup screen will appear.  
1.LANGUAGE  
2.DISPLAY  
3.AUDIO  
4.DOWN SAMPLING  
4.PARENTAL  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
:
SETUP CANCEL  
:
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
:
SETUP  
Down Sampling (Default: AUTO)  
Set the output for the DVD  
recorded in PCM 96 kHz (96 kHz or 48 kHz)  
2
Press the K/L buttons to select Audio and  
then press the ENTER button.  
SET-UP  
¡Press the K/L buttons to select an item, and then  
press the ENTER button.  
1.LANGUAGE  
2.DISPLAY  
3.AUDIO  
4.PARENTAL  
SETUP MENU  
SELECT:  
/
SET  
:
ENTER  
RETURN  
AUDIO OPTIONS  
EXIT  
:
SETUP CANCEL  
:
1.DRC  
2.DOLBY DIGITAL  
3.DTS  
OFF  
ON  
OFF  
AUTO  
4.DOWN SAMPLING  
3
Press the K/L buttons to select an item, and  
then press the ENTER button.  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
SET-UP  
AUDIO CONTROLS  
DOWN SAMPLING  
:
SETUP CANCEL  
:
DRC (Default: OFF)  
1.AUTO  
2.48kHz  
3.96kHz  
On: DRC  
(Dynamic Range Control)  
SELECT:  
/
SET  
:
ENTER  
RETURN  
EXIT:  
SETUP CANCEL  
:
¡This function is for controlling the range of sound  
volume. By compressing the range of sound volume,  
it is possible not only to suppress the output of loud  
sound at night and but also to raise the volume of  
low sound.  
When playing a disc with copyright protection  
¡If you select 96 kHz, copyright protection will be  
activated and no sound will come out. If you select  
AUTO, sound will be down sampled at 48 kHz.  
¡This function is effective only for the sound record-  
ed by Dolby Digital recording.  
4
Press the SETUP button.  
SET-UP  
AUDIO CONTROLS  
¡The setup mode will be canceled and the ordinary  
screen will appear.  
1.DRC  
2.DOLBY DIGITAL  
3.DTS  
OFF  
ON  
OFF  
AUTO  
4.DOWN SAMPLING  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
:
SETUP CANCEL  
:
Dolby Digital (default: ON)  
On : Output by Dolby Digital  
Set to On when the unit is connected to a Dolby  
Digital Decoder.  
SET-UP  
AUDIO CONTROLS  
1.DRC  
2.DOLBY DIGITAL  
3.DTS  
OFF  
ON  
OFF  
AUTO  
4.DOWN SAMPLING  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
:
SETUP CANCEL  
:
EN  
36  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When Parental Level is selected  
PARENTAL LOCK  
¡Press the K/L buttons to select an  
item from ALLor 8 to 1 and  
then press the ENTER button.  
DVD  
1
Press the SETUP button in STOP mode.  
SET-UP  
PARENTAL CONTROLS  
¡The setup screen will appear.  
1.PARENTAL LEVEL  
2.CHANGE  
ALL  
SET-UP  
1.LANGUAGE  
2.DISPLAY  
3.AUDIO  
SET-UP  
PARENTAL CONTROLS  
PARENTAL LEVEL  
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
:
SETUP CANCEL  
:
4.PARENTAL  
ALL  
8
7
6
5
[NC-17]  
[R]  
SELECT:  
/
SET  
:
ENTER  
RETURN  
EXIT:  
SETUP CANCEL  
:
SELECT:  
EXIT  
/
SET  
:
ENTER  
RETURN  
:
SETUP CANCEL  
:
2
3
Press the K/L buttons to select PARENTAL,  
and then press the ENTER button.  
5
Press the SETUP button.  
SET-UP  
¡The setup mode will be canceled and the ordinary  
screen will appear.  
1.LANGUAGE  
2.DISPLAY  
3.AUDIO  
4.PARENTAL  
CONTROL LEVELS  
ALL  
All parental lock is cancelled.  
SELECT:  
EXIT  
/
SET  
CANCEL: RETURN  
:
ENTER  
¡
:
SETUP  
¡
Level 8  
Press the Number buttons to enter a 4-digit  
password (you can use any 4-digits except  
for 4737), and then press the ENTER button.  
DVD software of any grade (adult/general/children)  
can be played back.  
¡
Levels 7 to 2  
¡This number will be used as the password from the  
Only DVD software intended for general use and  
children can be played back.  
second time onward.  
¡By entering the password, you can then change the  
control level and password settings.  
¡
Level 1  
Only DVD software intended for children can be  
played back, with those intended for adult and  
general use prohibited.  
¡If you want to change the password, select  
CHANGEand enter a new password. Then press  
the ENTER button.  
SET-UP  
PARENTAL CONTROLS  
PASSWORD  
Notes  
¡With some DVDs, it may be difficult to find if they  
are compatible with parental lock. Be sure to check  
if the parental lock function operates in the way that  
you have set.  
Please enter a 4-digit password.  
- - - -  
EXIT:  
SETUP  
CANCEL: RETURN  
¡Record the password in case you forget it.  
4
Press the K/L buttons to select an item, and  
then press the ENTER button.  
IF YOU FORGET THE PASSWORD  
1) Press 4, 7, 3, and 7 at Step 3.  
¡Password will be cleared and parental level will be  
set to ALL.  
2) Proceed the above Steps 3-5 again.  
EN  
37  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE CODE LIST  
Language  
Country code  
Language  
Country code  
No.  
No.  
1
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
Latvian; Lettish  
Malagasy  
Maori  
4 7 4 7  
4 7 4 8  
4 7 5 2  
4 7 5 9  
4 7 6 4  
4 7 6 5  
4 7 7 1  
4 7 7 2  
4 8 4 7  
4 8 5 1  
4 8 5 3  
4 8 5 4  
4 8 5 5  
4 8 6 0  
4 8 6 1  
4 8 6 4  
4 9 4 7  
4 9 6 1  
4 9 6 5  
4 9 7 1  
5 0 4 7  
5 0 5 1  
5 0 7 2  
5 1 5 8  
5 1 6 0  
5 1 6 1  
5 1 6 5  
5 1 6 6  
5 1 6 7  
5 2 4 7  
5 2 5 5  
5 2 5 6  
5 2 6 1  
5 2 6 4  
5 2 7 1  
5 3 4 7  
5 3 5 0  
5 3 5 8  
5 3 6 0  
5 3 6 7  
5 4 4 7  
5 4 5 5  
5 4 6 4  
5 4 6 7  
5 4 7 1  
5 5 4 7  
5 5 5 1  
5 5 5 7  
5 5 6 0  
5 5 6 5  
5 5 6 6  
5 5 6 9  
5 6 4 7  
5 6 5 5  
5 6 6 9  
5 7 4 7  
5 7 5 7  
5 7 5 8  
5 7 5 9  
5 7 6 0  
5 7 6 1  
5 7 6 5  
5 7 6 7  
5 7 7 1  
5 8 4 7  
5 8 6 0  
5 8 6 1  
5 8 6 6  
5 8 6 8  
5 9 5 3  
5 9 5 5  
5 9 5 7  
5 9 5 8  
5 9 6 0  
5 9 6 1  
5 9 6 4  
5 9 6 5  
5 9 6 6  
5 9 7 1  
6 0 4 7  
6 0 5 1  
6 0 5 8  
6 0 6 1  
6 1 4 9  
6 1 5 9  
6 1 6 4  
6 2 4 7  
6 2 5 8  
6 2 6 5  
6 2 6 6  
6 3 6 7  
6 4 5 9  
6 4 6 0  
6 4 6 1  
6 4 6 7  
6 4 6 9  
6 5 4 7  
6 5 5 0  
6 5 5 3  
6 5 5 4  
6 5 5 5  
6 5 5 7  
6 5 5 8  
6 5 5 9  
6 5 6 0  
6 5 6 1  
6 5 6 3  
6 5 6 4  
6 5 6 5  
6 5 6 6  
6 5 6 7  
6 5 6 8  
6 5 6 9  
6 6 4 7  
6 6 5 1  
6 6 5 3  
6 6 5 4  
6 6 5 5  
6 6 5 7  
6 6 5 8  
6 6 6 0  
6 6 6 1  
6 6 6 4  
6 6 6 5  
6 6 6 6  
6 6 6 9  
6 7 5 7  
6 7 6 4  
6 7 7 2  
6 8 5 5  
6 8 6 1  
6 9 6 1  
7 0 5 4  
7 1 6 1  
7 2 5 4  
7 2 6 7  
Afar  
2
Abkhazian  
Afrikaans  
Amharic  
3
4
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
5
Arabic  
6
Assamese  
Aymara  
7
8
Azerbaijani  
Bashkir  
9
Malay  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
Maltese  
Byelorussian  
Bulgarian  
Bihari  
Burmese  
Nauru  
Nepali  
Bislama  
Dutch [DUT]  
Norwegian [NOR]  
Occitan  
Bengali; Bangla  
Tibetan  
Breton  
(Afan) Oromo  
Oriya  
Catalan  
Corsican  
Czech  
Panjabi  
Polish  
Welsh  
Pashto; Pushto  
Portuguese [POR]  
Quechua  
Danish [DAN]  
German [GER]  
Bhutani  
Rhaeto-Romance  
Kirundi  
Greek [GRE]  
English [ENG]  
Esperanto  
Spanish [SPA]  
Estonian  
Basque  
Romanian [RUM]  
Russian [RUS]  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangho  
Persian  
Finnish [FIN]  
Fiji  
100 Serbo-Croatian  
101 Singhalese  
102 Slovak  
Faroese  
French [FRE]  
Frisian  
103 Slovenian  
104 Samoan  
105 Shona  
106 Somali  
107 Albanian  
108 Serbian  
109 Siswat  
Irish [IRI]  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
110 Sesotho  
111 Sundanese  
112 Swedish [SWE]  
113 Swahili  
114 Tamil  
Hindi  
Croatian  
Hungarian [HUN]  
Armenian  
Interlingua  
Interlingue  
Inupiak  
115 Telugu  
116 Tajik  
117 Thai  
Indonesian  
Icelandic [ICE]  
Italian [ITA]  
Hebrew  
118 Tigrinya  
119 Turkmen  
120 Tagalog  
121 Setswana  
122 Tonga  
Japanese  
Yiddish  
123 Turkish [TUR]  
124 Tsonga  
125 Tatar  
Japanese [JPN]  
Georgian  
Kazakh  
126 Twi  
Greenlandic  
Cambodian  
Kannada  
Korean [KOR]  
Kashmiri  
Kurdish  
127 Ukrainian  
128 Urdu  
129 Uzbek  
130 Vietnamese  
131 Volapuk  
132 Wolof  
Kirghiz  
133 Xhosa  
Latin  
134 Yoruba  
135 Chinese [CHI]  
136 Zulu  
Lingala  
Laothian  
Lithuanian  
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change  
the Audio or Subtitle language setting on pages 31 and 32. If you choose any other languages, ---will be dis-  
played instead. (3 letter language codes are written in square brackets.)  
EN  
38  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
If the DVD/VCR does not perform properly when operated as instructed in this Owner's Manual, check the  
player consulting the following checklist.  
PROBLEM  
No power.  
CORRECTIVE ACTION  
D
V
D
• Make sure the power plug is connected to an AC outlet.  
• Make sure the power is turned on.  
The player does not respond to. • Check if the power plug is connected to an AC outlet.  
the remote control.  
• Check the batteries in the remote control.  
• Aim the remote control directly at the remote sensor. If necessary, remove all the  
obstacles between the sensor and the remote.  
You have to be within 7 m of the player.  
• Check if the correct mode is selected. If not switch the mode by pressing the DVD or  
the VCR button, whichever you need, on the remote control.  
V
C
R
Timer recording is impossible. • Make sure the timer recording is set correctly.  
• Make sure the power is off.  
V
C
R
• Make sure the DVD/VCR clock is set correctly.  
Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.  
• Put he player in VCR mode. Press the VCR button on the remote control so that the green  
VCR OUTPUT light is lit.  
Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL  
DVD/VCR.  
(
)
button on the  
Cannot view a tape but the  
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .  
• Make sure the DVD/VCR is not in the Menu mode.  
.
audio is OK  
No, or poor, playback picture.  
• Select channel 3 or 4 on your TV, then press the VCR/TV button so that the VCR/TV  
indicator on the VCR comes on.  
• Fine tune your TV.  
TV programs cannot be seen  
normally.  
• Re-check the ANT. IN and ANT. OUT connections. See page 14.  
• Press the VCR/TV button so that the VCR/TV indicator on the DVD/VCR disappears.  
• Press the VCR button on the remote control to put it in the VCR mode. Check if the green  
VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.  
The VCR/TV light goes off.  
Video or color fades in and out  
when making a copy of a video tape.  
You cannot copy a copyrighted video tape. You are experiencing copy guard protection.  
Cannot remove the tape.  
• Check if the player is in the VCR mode. If not, press the VCR button on the remote control  
to switch the mode.  
No picture.  
• Connect the video cables firmly.  
D
V
D
• Insert a correct video disc that plays on this player.  
• Press the DVD button on the remote control. Check if the DVD OUTPUT Light is lit. Then  
try other DVD feature buttons.  
• Insert the disc.  
• Clean the disc.  
.
Disc cannot be played  
• Place the disc correctly, with the label side up.  
• Cancel the parental lock or change the control level.  
• Connect the audio cables firmly.  
.
No sound  
Turn the power of the audio component on.  
• Correct the audio output settings.  
• Correct the input settings on the audio component.  
.
• Connect the player directly to the TV.  
Distorted picture  
There are some cases where pictures may be slightly distorted, which are not a sign of a mal-  
function.  
• Although pictures may stop for a moment, this is not a malfunction.  
Audio or subtitle language  
does not match the set up  
The selected language is not available for audio or subtitles on the DVD.  
This is not a malfunction  
The camera angle cannot be  
changed.  
The DVD does not contain sequences recorded from different camera angles.  
This is not a malfunction.  
Audio or subtitle language  
cannot be changed.  
The DVD does not contain audio source or subtitles in the selected language.  
This is not a malfunction.  
That operation is prohibited by the player or the disc.  
This is not a malfunction.  
Prohibited iconappears on the  
screen, prohibiting an operation.  
Notes  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this  
Owners Manual for details on correct operations.  
¡Playback from a desired track and random playback are not available during program playback.  
EN  
39  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDLING PRECAUTIONS  
AUTO HEAD CLEANING  
SERVICING  
Automatically cleans video heads as you insert or  
remove a cassette, so you can see a clear picture.  
Playback picture may become blurred or interrupted  
while the TV program reception is clear. Dirt accu-  
mulated on the video heads after long periods of  
use, or the usage of rental or worn tapes can cause  
this problem. If a streaky or snowy picture appears  
during playback, the video heads in your  
Should your DVD/VCR become inoperative, do not try  
to correct the problem by yourself. There are no user-  
serviceable parts inside. Turn off, unplug the power  
cord, and please call our help line at 1-800-287-4871 to  
locate an Authorized Service Center.  
CABINET CLEANING  
¡Wipe the front panel and other exterior surfaces of  
the DVD/VCR with a soft cloth immersed in  
lukewarm water and wrung dry.  
DVD/VCR may need to be cleaned.  
1. Please visit your local Audio/Video store and pur-  
chase a good quality VHS Video Head Cleaner.  
2. If a Video Head Cleaner does not solve the prob-  
lem, please call our help line at 1-800-287-4871 to  
locate an Authorized Service Center.  
¡Never use a solvent or alcohol. Do not spray  
insecticide liquid near the DVD/VCR. Such  
chemicals may cause damage and discoloration to  
the exposed surfaces.  
NOTES:  
Remember to read the instructions included with the  
video head cleaner before use.  
Clean video heads only when problems occur.  
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY  
¡If the player still does not perform properly when it is operated while referring to the relevant sections and to  
the TROUBLESHOOTING GUIDE in this Owners Manual, the laser optical pickup unit may be dirty. Consult  
your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.  
DISC HANDLING  
¡Use discs which have the following logos on them. ¡To clean-off, use a soft cloth.  
(Optical audio digital discs.)  
¡Do not use a hard cloth since this will mar the disc.  
¡Wipe the disc in a straight line from center to edge.  
¡Never wipe with a circular motion.  
¡Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
¡Do not use detergent or abrasive cleaning agents.  
¡Always store the disc in its protective case when it is  
not used.  
EN  
40  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Product type:  
Discs:  
DVD player with Video Cassette Recorder  
DVD video  
Audio CD  
Video Cassette tape  
Converter output:  
Power source:  
VHF Channel 3 or 4.  
120 V AC +/- 10%, 60 Hz +/- 0.5%  
25 W (standby: 7.2 W)  
5°C to 40°C  
Power consumption:  
Operating temperature:  
Dimensions:  
W 17-1/8(435 mm)  
H 4(99 mm)  
D 10-1/2(266 mm)  
8.8 lbs (4 kg)  
Weight:  
¡Designs and specifications are subject to change without notice.  
¡If there is a discrepancy between languages, the default language will be English.  
EN  
41  
1L25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYLVANIA HOME ENTERTAINMENT WARRANTY  
We appreciate your purchase of a SYLVANIA Home Entertainment product. We take pride in the  
quality of our products and have manufactured your new Home Entertainment unit to exacting quality  
standards. We feel confident that in normal use, it will provide you with satisfactory performance.  
However, should you experience difficulty, you are protected under the provisions of this warranty.  
SYLVANIA Home Entertainment products are warranted against manufacturing defects in materials  
and workmanship in normal use for the following periods from the date of purchase by the original  
user, and is conditional upon the unit being installed and used as directed in the instruction manual.  
Product  
Parts and Labour  
D.V.D./V.C.R.  
Remote Control  
1 year  
90 days  
SYLVANIAs obligation under this warranty shall be limited to the repair, including all necessary parts  
and the cost of the labour connected therewith, or at our option the exchange of any Home  
Entertainment product which shows evidence of a manufacturing defect within the warranty period.  
Replacement parts, furnished in connection with this warranty shall be warranted for a period equal to  
the unexpired portion of the original equipment warranty.  
CUSTOMER OBLIGATIONS  
This warranty applies to the product from the original date of purchase at retail. Therefore, the owner  
must provide a copy of the original, dated bill of sale. No warranty service will be performed without  
a bill of sale. Transportation to and from the service depot is the responsibility of the owner.  
WARRANTY EXCLUSIONS  
This warranty is extended to SYLVANIA Home Entertainment products purchased and used in  
Canada. This warranty shall not apply to appearance or accessory items including but not limited to:  
antenna, cabinet, cabinet parts, knobs, batteries, connecting cables, cassette tapes, compact discs.  
This warranty shall, in addition, not apply to cleaning video/audio heads, pinch rollers, tape transport  
system damages due to handling, transportation, unpacking, set-up, installation, customer adjustments  
that are covered in the instruction book, repair or replacement of parts supplied by other than the  
SYLVANIA authorized service depot, any malfunction or failure caused by or resulting from abnormal  
environmental conditions, improper unauthorized service, improper maintenance, modifications or  
repair by the consumer, abuse, misuse, neglect, accident, fire, flood, or other Acts of God, and  
incorrect line voltage.  
This Home Entertainment product is only warranted to the original retail purchaser. This warranty  
becomes void in the event of commercial or rental use. This warranty becomes void in the event serial  
numbers are altered, defaced or removed.  
SYLVANIA reserves the right to make changes in design or to make additions to or improvements  
upon this product without incurring any obligation to install the same on products previously  
manufactured. The foregoing is in lieu of all other warranties expressed or implied and SYLVANIA  
neither assumes nor authorizes any person to assume for it any other obligation or liability in  
connection with the sale or service of this product. In no event shall SYLVANIA or its SYLVANIA  
dealers be liable for special or consequential damage arising from the use of this product, or for any  
delay in the performance of this warranty due to cause beyond our control.  
The purchaser may have other rights under existing provincial or federal laws, and where any terms of  
this warranty are prohibited by such laws, they are deemed null and void, but the remainder of the  
warranty shall remain in effect.  
HOW TO OBTAIN SERVICE  
Should this product require service, you may obtain specific information on how to obtain service by  
contacting the SYLVANIA Dealer from whom this product was purchased, or by contacting us  
directly:  
SONIGEM SERVICE  
300 Alden Road  
Markham, Ontario  
L3R 4C1  
PHONE: (905) 940-5089 FAX: (905) 940-2303  
1-800-287-4871  
Printed in China  
0VMN03029  
#####  
H9226CD  
Download from Www.Somanuals.com. All Manuals Search And Download.  

SIIG Computer Hardware 04 0341D User Manual
Snapper Air Cleaner 31F700 User Manual
Sony Ericsson Cell Phone F305 User Manual
Sony Ericsson Cell Phone MK16a User Manual
Sony Personal Computer VGC LS20 User Manual
Sony Video Game Controller 10037 User Manual
Sun Microsystems Switch 820 6799 10 User Manual
Sylvania Microwave Oven SM81015 User Manual
Tally Genicom Printer T2145 User Manual
Tannoy Portable Speaker CMS601 DC User Manual